Draincoil®

Draincoil® corrugated drainage pipe is of a consistent

high quality and comes in a broad range of sizes and
grades.

It is available slotted or unslotted, with or without filter

sock. There is a full range of fittings to suit a wide
variety of drainage projects.

Features & Benefits

· Range of pipe diameters – 50mm, 65mm, 80mm,

100mm and 160mm

· Lightweight, easily handling

· Flexible, able to bend around corners, moves

with soil and does not crack

· Easy to install, ideal DIY product

· Minimal fittings required, ease of installation,

moves with ground

· Pipe and fittings made in Australia

· Pipe made from consumer collected recycled

polyethylene plastic

· Range of push-together fittings which lock to

the corrugations of the pipe

· All fittings are barcoded for ease of check-out

scanning

P  13 11 69 | sales@vinidex.com.au | www.vinidex.com.au

Limitation of Liability
This product catalogue has been compiled by Vinidex Pty Limited (“the Company”) to promote better understanding of the technical aspects of the Company’s products to assist users in obtaining from them the best possible
performance.
The product catalogue is supplied subject to acknowledgement of the following conditions:
1 The product catalogue is protected by copyright and may not be copied or reproduced in any form or by any means in whole or in part without prior consent in writing by the Company. 2 Product specifications, usage data and
advisory information may change from time to time with advances in research and field experience. The Company reserves the right to make such changes at any time without further notice. 3 Correct usage of the Company’s prod-
ucts involves engineering judgements, which can not be properly made without full knowledge of all the conditions pertaining to each specific installation. The Company expressly disclaims all and any liability to any person whether
supplied with this publication or not in respect of anything and all of the consequences of anything done or omitted to be done by any such person in reliance whether whole or part of the contents of this publication. 4 No offer to
trade, nor any conditions of trading, are expressed or implied by the issue of content of this product catalogue. Nothing herein shall override the Company’s Condition of Sale, which may be obtained from the Registered Office or any
Sales Office of the Company. 5 This product catalogue is and shall remain the property of the Company, and shall be surrendered on demand to the Company. 6 Information supplied in this product catalogue does not override a job
specification, where such conflict arises; consult the authority supervising the job. © Copyright Vinidex Pty Limited.
 Draincoil®

Product Range - Pipe Corrugated

Draincoil® SN8 (CL400)

Size Product Code SN Coil Length

24582 8 10m
50mm 24580 8 20m
24590 8 200m
24597 8 10m
65mm 24600 8 20m
24620 8 200m
24630 8 20m
80mm
24641* 8 100m
24707 8 10m
100mm 24700 8 20m
24710 8 100m
160mm
24745 8 40m
(Twin Wall)

Draincoil® SN20 (CL1000)

Size Product Code SN Coil Length

100mm 24724 20 100m

Draincoil® Unslotted SN8 (CL400)

Size Product Code SN Coil Length

50mm 24585 8 20m

65mm 24603 8 20m
80mm 24635 8 20m
24820 8 20m
100mm
24840 8 100m
100mm
24713 8 100mm
(Twin Wall)
160mm
24741 8 40m
(Twin Wall)

Diverter Hose
34mm hose fitted with 25mm cuff to suit most washing machine hoses or 25mm micro irrigation fittings.
Large 34mm diameter increases flow, reduces back pressure on washing machine pump and prevents
back up in laundry tub. 50mm diverter hose suitable for extra high flows.

Product
Size Coil Length
Code
65573 10m
34mm
65574 20m
50mm 65575 20m
* Products made to order, minimum order QTY applies.

4
4
 Draincoil®

StormFlex® Pipe SN12

StormFlex® is a flexible alternative to rigid PVC stormwater pipe. It also replaces multiple fittings
when joining downpipe to the groundpipe. StormFlex® is white and stays stiff in direct sunlight.
It is made from UV stabilised white polypropylene. StormFlex® is also used for temporary
stormwater diversion on construction sites. StormFlex® Fittings displayed on page 13
are used for temporary stormwater connections on construction sites.

Size Product Code Coil Length

24979 10m
100mm
24980 30m

Draincoil® SN8 (CL400) with Filtersock

Size Product Code SN Coil Length

50mm Sock 24581 8 20m

24608 8 20m
65mm Sock
24625 8 200m
80mm Sock 24638 8 20m
24703 8 20m
100mm Sock
24712 8 100m
100mm RTA Sock
24698 8 100m
(Twin Wall)

160mm RTA Sock

24746 8 40m
(Twin Wall)

Draincoil® SN20 (CL1000) with Filtersock

Size Product Code SN Coil Length

100mm RTA Sock 24725 20 100m

100mm PP Sock 24727 20 100m

Filter Sock
Filter sock is a geotextile sleeve manufactured from high tensile strength polyester yarn. It is fitted over
Draincoil® corrugated drainage pipe to prevent small particles of soil (fines) from entering the pipe and
reducing the drainage capability. There are two grades to choose from. The heavier RTA grade conforms
to the specifications of the New South Wales Road and Traffic Authority (RTA), hence its name. It has more
continuously extruded fibres per yarn and can withstand higher loads of abrasion, strain and mechanical
installation without tearing.

Size Product Code Coil Length

65 RTA Filtersock Only 84656 100m

100 RTA Filtersock Only 84658 100m
5
5
 Draincoil®

Product Range - Draincoil® Fittings

Couplings

Order Carton
Size Product Code
QTY QTY

50mm 65620 10 120

65mm 65670 10 60
80mm 65015 10 100
100mm 65561 10 30
160mm 65014 1 12

Coupling SN20 (CL1000)

Order Carton
Size Product Code
QTY QTY
100mm 65030 10 30

Reducing Couplings

Order Carton
Size Product Code
QTY QTY

100mm to 50mm 65567 10 60

100mm to 65mm 65568 10 50

Tee

Order Carton
Size Product Code
QTY QTY

50mm 65571 10 60
65mm 65569 10 30
100mm 65600 5 15

Y Junctions

Order Carton
Size Product Code
QTY QTY

65mm 65572 10 30
100mm 65580 1 10

6
6
 Draincoil®

Branch Take-Off Tee

Order Carton
Size Product Code
QTY QTY

160mm to 50mm 65016 10 100

Crosses

Order Carton
Size Product Code
QTY QTY

65mm 65564 5 20
100mm 65610 1 14

End Caps

Order Carton
Size Product Code
QTY QTY

50mm 65565 10 240

65mm 65566 10 200
100mm 65570 10 100

End Grate

Order Carton
Size Product Code
QTY QTY

65mm 65013 10 150

Adaptors

Order Carton
Size Product Code
QTY QTY

100mm Draincoil to 90mm 65563

10 40
PVC Stormwater
100mm Draincoil to 100mm 65560
10 30
PVC DWV

7
7
 Draincoil®

Product Range - StormFlex® Fittings

PVC Fittings

Order Carton
Size Product Code
QTY QTY

100mm Coupling 65012 1 20

100mm x 90mm Adaptor 65011 10 50

StormFlex® Fittings Applications

StormFlex® to StormFlex® 90mm PVC to StormFlex® 100mm DWV to StormFlex®

Greywater Fittings

Greywater Diverter Valve

Order Carton
Size Product Code
QTY QTY

40mm PVC Outlet 65577 5 30

50mm PVC Outlet 65576 5 30

Greywater Diverter Hose Connector Cuffs

Order Carton
Size Product Code
QTY QTY

34 x 34mm Connector Cuff 65017 20 240

34x 25mm Hose Adaptor Cuff 65018 10 300

Greywater Hose Adaptor

Order Carton
Size Product Code
QTY QTY

50mm DWV to 25mm LD 65562 20 240

Rainwater Fittings

Rainwater Diverter
Use to divert rainwater to pools, gardens and water tanks. Can be converted from left to right-hand.
Suits 90mm diameter stormwater pipe.

Order Carton
Size Product Code
QTY QTY

90mm 65578 5 10

*Please contact Vinidex for ordering information.

8
8
Rainwater Fittings (cont.)

Adaptors
A full range of adaptors are available for connecting Rainwater Diverters to diverter hose.
There are two styles of downpipe adaptors to ensure “leak-proof” connections when converting
from round to rectangular or rectangular to round.

Order Carton
Size Product Code
QTY QTY

50mm DWV Socket to 50mm Diverter Hose

65019 10 200

90mm Stormwater Socket to 50mm DWV 65024 10 70

100mm x 50mm Rectangular Downpipe

65025 10 50
to 90mm Stormwater Adaptor

90mm Stormwater to 100mm x 50mm

65026 10 60
Rectangular Downpipe Adaptor

Rainwater Fittings Installation Options

Installation Options:
The 90mm Rainwater Diverter is very versatile and can be adapted for use in a wide variety of applications, some of which are
depicted below.
1. Use with 50mm 2. Adapting to Rectangular 3. Diverting to 90mm
Diverter Hose downpipe Stormwater pipe

Note: The 90mm Rainwater Diverter is not a valve. Some leakage between outlets will occur.

Right-Hand and Left-Hand Installation:

The 90mm Rainwater Diverter can be used for both left-hand and right-hand installations. Always check that the diverter
valve hashas
been set to the correct orientation after installation. The “T” arrow on the handle should always rotate between the side and
bottom outlets. If this is not the case then unscrew the front cover, remove the handle and reinsert it in the correct orienta
- tion.

In
Left-Hand Install Right-Hand Install

Unscrew Front

Reinsert valve gate

Drain at 45º angle

If the handle is installed upside down, i.e. with the “T” arrow pointing upwards,
then the inlet will be blocked and the diverter will not function.

P  13 11 69 | sales@vinidex.com.au | www.vinidex.com.au VIN028

-20150228