Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 65 views

    Macawber Beekay Limited, New Delhi: PLC Input Output List (Suggested)

    Uploaded by

    HARSHAL KIRITBHAI PATEL
    This document provides a list of suggested programmable logic controller (PLC) inputs and outputs for an upgraded fly ash handling system project. The list includes inputs and outputs for common systems, two boiler units, ash hoppers, and switch valves. Each component has multiple sensor inputs that monitor processes like level, pressure and faults. Corresponding outputs control solenoids, conveyors and alarms. The detailed list specifies over 70 discrete digital and analog signals to integrate the upgraded fly ash collection and transport automation.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Macawber Beekay Limited, New Delhi: PLC Input Output List (Suggested)

    Uploaded by

    HARSHAL KIRITBHAI PATEL
    65 views5 pages
    This document provides a list of suggested programmable logic controller (PLC) inputs and outputs for an upgraded fly ash handling system project. The list includes inputs and outputs for common systems, two boiler units, ash hoppers, and switch valves. Each component has multiple sensor inputs that monitor processes like level, pressure and faults. Corresponding outputs control solenoids, conveyors and alarms. The detailed list specifies over 70 discrete digital and analog signals to integrate the upgraded fly ash collection and transport automation.

    Original Title

    C-758 IO LIST R-0

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides a list of suggested programmable logic controller (PLC) inputs and outputs for an upgraded fly ash handling system project. The list includes inputs and outputs for common systems, two boiler units, ash hoppers, and switch valves. Each component has multiple sensor inputs that monitor processes like level, pressure and faults. Corresponding outputs control solenoids, conveyors and alarms. The detailed list specifies over 70 discrete digital and analog signals to integrate the upgraded fly ash collection and transport automation.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    65 views5 pages

    Macawber Beekay Limited, New Delhi: PLC Input Output List (Suggested)

    Uploaded by

    HARSHAL KIRITBHAI PATEL
    This document provides a list of suggested programmable logic controller (PLC) inputs and outputs for an upgraded fly ash handling system project. The list includes inputs and outputs for common systems, two boiler units, ash hoppers, and switch valves. Each component has multiple sensor inputs that monitor processes like level, pressure and faults. Corresponding outputs control solenoids, conveyors and alarms. The detailed list specifies over 70 discrete digital and analog signals to integrate the upgraded fly ash collection and transport automation.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    You are on page 1of 5

    PLC INPUT OUTPUT LIST (SUGGESTED)

    CLIENT : ULTRATECH CEMENT LTD. A/C AWARPUR CEMENT WORKS DOC. NO. : MB/C-758/28857
    PROJECT : UPGRADATION OF FLY ASH HANDLING SYSTEM REV. (0) DATE / BY : 19.05.2007 / S.R

    Macawber Beekay Limited, New Delhi


    Digital Digital Interposing PC PC PC
    Sl No. Input / Output Description Remarks
    Input Output Relay Command Indication Alarm

    A COMMON SYSTEM
    1 AHS System Start/Stop - - - 1 1 -
    2 Fault Alarm - - - - 1 1
    3 Alarm Accept - - - 1 - -
    4 Fly Ash Silo#1 Level High - - - - 1 1
    5 Fly Ash Silo#1 Vent Filter Timer Unit - - - - 1
    6 Fly Ash Silo#2 Level High - - - - 1 1
    7 Fly Ash Silo#2 Vent Filter Timer Unit - - - - 1
    FOR BOILER UNIT NO -1
    B BOILER BANK & ECO.HOPPER (SYSTEM-11) (FIRING SEQUENCE - BOTH TOGETHER)
    B-1 Boiler Bank Ash Vessel (Master) (V-111)
    1 Surge Hopper Level High 1 - - - 1 -
    2 Inlet Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Vessel Pressure Switch Low (PS-2) 1 - - - 1 -
    4 Vessel Pressure Switch High (PS-3) 1 - - - 1 -
    5 Convey Air Pressure Switch (PS-4) 1 - - - 1 -
    6 System Probe Mode - - - 1 - -
    7 System Timer Mode - - - 1 - -
    8 System Start/Stop 1 - - 1 1 -
    9 Probe Over ride Push Button 1 - - 1 - -
    10 Purge Push Button 1 - - 1 - -
    11 Inlet Dome Valve Open Solenoid - 1 1 - - -
    12 Convey ON Solenoid - 1 1 - - -
    13 Cycle On - - - - 1 -
    14 Line Block - - - - 1 1
    15 System Fault - - - - 1 1
    16 Cycle Counter - - - - 1 -
    17 Seal Fail - - - - 1 1
    18 Cycle not starting - - - - 1 1
    19 Convey Air Fail - - - - 1 1
    B-2 ECO Ash Vessel (Slave) (V-112)
    1 Surge Hopper Level High 1 - - - 1 -
    2 Inlet Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Inlet Dome Valve Open Solenoid - * - - - - See Note
    4 Seal Fail - - - - 1 1
    NOTE: *Inlet dome valve solenoid of Slave Vessel shall also open from output of Master Vessel inlet dome valve open solenoid.
    B-3 SWITCH VALVE (1/2 WAY) SV-1 (EXISTING)
    1 Route -1 Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    2 Route -2 Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Route -1 Dome Valve Open Limit Switch 1 - - - 1 -
    4 Route -2 Dome Valve Open Limit Switch 1 - - - 1 -
    5 Route -1 Dome Valve Open Solenoid - 1 1 - - -
    6 Route -2 Dome Valve Open Solenoid - 1 1 - - -
    7 Route -1 Selected - - - 1 - -
    8 Route -2 Selected - - - 1 - -
    9 Switch Valve Fault - 1 - - 1 1
    C APH HOPPERS (SYSTEM-12)
    C-1 Denseveyor- (V-12)
    1 Surge Hopper Level High 1 - - - 1 -
    2 Inlet Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Vessel Pressure Switch Low (PS-2) 1 - - - 1 -
    4 Convey Air Pressure Switch (PS-4) 1 - - - 1 -
    5 System Probe Mode - - - 1 - -
    6 System Timer Mode - - - 1 - -
    7 System Start/Stop 1 - - 1 1 -
    8 Probe Over ride Push Button 1 - - 1 - -
    9 Purge Push Button 1 - - 1 - -
    10 Inlet Dome Valve Open Solenoid - 1 1 - - -
    11 Convey ON Solenoid - 1 1 - - -
    12 Cycle On - - - - 1 -
    13 Line Block - - - - 1 1
    14 System Fault - - - - 1 1
    15 Cycle Counter - - - - 1 -
    16 Seal Fail - - - - 1 1
    17 Cycle not starting - - - - 1 1
    18 Convey Air Fail - - - - 1 1
    C-2 SWITCH VALVE (1/2 WAY) SV-2
    1 Route -1 Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    2 Route -2 Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Route -1 Dome Valve Open Limit Switch 1 - - - 1 -
    4 Route -2 Dome Valve Open Limit Switch 1 - - - 1 -

    Page 1 of 5
    Macawber Beekay Limited, New Delhi
    Digital Digital Interposing PC PC PC
    Sl No. Input / Output Description Remarks
    Input Output Relay Command Indication Alarm

    5 Route -1 Dome Valve Open Solenoid - 1 1 - - -


    6 Route -2 Dome Valve Open Solenoid - 1 1 - - -
    7 Route -1 Selection - - - 1 - -
    8 Route -2 Selection - - - 1 - -
    9 Switch Valve Fault - 1 - - 1 1
    D ESP 1st FIELD (SYSTEM-13)
    D-1 Denseveyor- (V-13)
    1 Surge Hopper Level High 1 - - - 1 -
    2 Inlet Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Vessel Pressure Switch Low (PS-2) 1 - - - 1 -
    4 Convey Air Pressure Switch (PS-4) 1 - - - 1 -
    5 System Probe Mode - - - 1 - -
    6 System Timer Mode - - - 1 - -
    7 System Start/Stop 1 - - 1 1 -
    8 Probe Over ride Push Button 1 - - 1 - -
    9 Purge Push Button 1 - - 1 - -
    10 Inlet Dome Valve Open Solenoid - 1 1 - - -
    11 Convey ON Solenoid - 1 1 - - -
    12 Cycle On - - - - 1 -
    13 Line Block - - - - 1 1
    14 System Fault - - - - 1 1
    15 Cycle Counter - - - - 1 -
    16 Seal Fail - - - - 1 1
    17 Cycle not starting - - - - 1 1
    18 Convey Air Fail - - - - 1 1
    D-2 SWITCH VALVE (1/2 WAY) SV-3
    1 Route -1 Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    2 Route -2 Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Route -1 Dome Valve Open Limit Switch 1 - - - 1 -
    4 Route -2 Dome Valve Open Limit Switch 1 - - - 1 -
    5 Route -1 Dome Valve Open Solenoid - 1 1 - - -
    6 Route -2 Dome Valve Open Solenoid - 1 1 - - -
    7 Route -1 Selection - - - 1 - -
    8 Route -2 Selection - - - 1 - -
    9 Switch Valve Fault - 1 - - 1 1
    E ESP 2nd FIELD (SYSTEM-14) (FIRING SEQUANCE 1+2)
    E-1 Ash Vessel (Master) (V-141)
    1 Surge Hopper Level High 1 - - - 1 -
    2 Inlet Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Vessel Pressure Switch Low (PS-2) 1 - - - 1 -
    4 Vessel Pressure Switch High (PS-3) 1 - - - 1 -
    5 Convey Air Pressure Switch (PS-4) 1 - - - 1 -
    6 System Probe Mode - - - 1 - -
    7 System Timer Mode - - - 1 - -
    8 System Start/Stop 1 - - 1 1 -
    9 Probe Over ride Push Button 1 - - 1 - -
    10 Purge Push Button 1 - - 1 - -
    11 Inlet Dome Valve Open Solenoid - 1 1 - - -
    12 Convey ON Solenoid - 1 1 - - -
    13 Cycle On - - - - 1 -
    14 Line Block - - - - 1 1
    15 System Fault - - - - 1 1
    16 Cycle Counter - - - - 1 -
    17 Seal Fail - - - - 1 1
    18 Cycle not starting - - - - 1 1
    19 Convey Air Fail - - - - 1 1
    ESP 3rd FIELD (EXISTING)
    E-2 Ash Vessel (Slave-1) (V-142)
    1 Surge Hopper Level High 1 - - - 1 -
    2 Inlet Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Probe Over ride Push Button 1 - - 1 - -
    4 Inlet Dome Valve Open Solenoid - 1 1 - - -
    5 Cycle On - - - - 1 -
    6 Cycle Counter - - - - 1 -
    7 Seal Fail - - - - 1 1
    8 Cycle not starting - - - - 1 1
    ESP 4rd FIELD (EXISTING)
    E-3 Ash Vessel (Slave-2) (V-143)
    1 Inlet Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    2 Inlet Dome Valve Open Solenoid - * - - - - See Note
    3 Seal Fail - - - - 1 1
    NOTE: *Inlet dome valve solenoid of Slave Vessel-2 shall also open from output of Slave Vessel-1 inlet dome valve open Solenoid.
    E-4 SWITCH VALVE (1/2 WAY) SV-4 (EXISTING)
    1 Route -1 Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    2 Route -2 Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Route -1 Dome Valve Open Limit Switch 1 - - - 1 -

    Page 2 of 5
    Macawber Beekay Limited, New Delhi
    Digital Digital Interposing PC PC PC
    Sl No. Input / Output Description Remarks
    Input Output Relay Command Indication Alarm

    4 Route -2 Dome Valve Open Limit Switch 1 - - - 1 -


    5 Route -1 Dome Valve Open Solenoid - 1 1 - - -
    6 Route -2 Dome Valve Open Solenoid - 1 1 - - -
    7 Route -1 Selected - - - 1 - -
    8 Route -2 Selected - - - 1 - -
    9 Switch Valve Fault - 1 - - 1 1
    F AIR RECEIVER
    1 Pressure Switch 1 - - - 1 -
    FOR BOILER UNIT NO-2
    G BOILER BANK & ECO.HOPPER (SYSTEM-21) (BOTH TOGETHER)
    G-1 Boiler Bank Ash Vessel (Master) (V-211)
    1 Surge Hopper Level High 1 - - - 1 -
    2 Inlet Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Vessel Pressure Switch Low (PS-2) 1 - - - 1 -
    4 Vessel Pressure Switch High (PS-3) 1 - - - 1 -
    5 Convey Air Pressure Switch (PS-4) 1 - - - 1 -
    6 System Probe Mode - - - 1 - -
    7 System Timer Mode - - - 1 - -
    8 System Start/Stop 1 - - 1 1 -
    9 Probe Over ride Push Button 1 - - 1 - -
    10 Purge Push Button 1 - - 1 - -
    11 Inlet Dome Valve Open Solenoid - 1 1 - - -
    12 Convey ON Solenoid - 1 1 - - -
    13 Cycle On - - - - 1 -
    14 Line Block - - - - 1 1
    15 System Fault - - - - 1 1
    16 Cycle Counter - - - - 1 -
    17 Seal Fail - - - - 1 1
    18 Cycle not starting - - - - 1 1
    19 Convey Air Fail - - - - 1 1
    G-2 ECO Ash Vessel (Slave) (V-212)
    1 Surge Hopper Level High 1 - - - 1 -
    2 Inlet Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Inlet Dome Valve Open Solenoid - * - - - - See Note
    4 Seal Fail - - - - 1 1
    NOTE: *Inlet dome valve solenoid of Slave Vessel shall also open from output of Master Vessel inlet dome valve open solenoid.
    G-3 SWITCH VALVE (1/2 WAY) SV-5 (EXISTING)
    1 Route -1 Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    2 Route -2 Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Route -1 Dome Valve Open Limit Switch 1 - - - 1 -
    4 Route -2 Dome Valve Open Limit Switch 1 - - - 1 -
    5 Route -1 Dome Valve Open Solenoid - 1 1 - - -
    6 Route -2 Dome Valve Open Solenoid - 1 1 - - -
    7 Route -1 Selected - - - 1 - -
    8 Route -2 Selected - - - 1 - -
    9 Switch Valve Fault - 1 - - 1 1
    H APH HOPPERS (SYSTEM-22)
    H-1 Denseveyor- (V-22)
    1 Surge Hopper Level High 1 - - - 1 -
    2 Inlet Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Vessel Pressure Switch Low (PS-2) 1 - - - 1 -
    4 Convey Air Pressure Switch (PS-4) 1 - - - 1 -
    5 System Probe Mode - - - 1 - -
    6 System Timer Mode - - - 1 - -
    7 System Start/Stop 1 - - 1 1 -
    8 Probe Over ride Push Button 1 - - 1 - -
    9 Purge Push Button 1 - - 1 - -
    10 Inlet Dome Valve Open Solenoid - 1 1 - - -
    11 Convey ON Solenoid - 1 1 - - -
    12 Cycle On - - - - 1 -
    13 Line Block - - - - 1 1
    14 System Fault - - - - 1 1
    15 Cycle Counter - - - - 1 -
    16 Seal Fail - - - - 1 1
    17 Cycle not starting - - - - 1 1
    18 Convey Air Fail - - - - 1 1
    H-2 SWITCH VALVE (1/2 WAY) SV-6
    1 Route -1 Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    2 Route -2 Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Route -1 Dome Valve Open Limit Switch 1 - - - 1 -
    4 Route -2 Dome Valve Open Limit Switch 1 - - - 1 -
    5 Route -1 Dome Valve Open Solenoid - 1 1 - - -
    6 Route -2 Dome Valve Open Solenoid - 1 1 - - -
    7 Route -1 Selected - - - 1 - -
    8 Route -2 Selected - - - 1 - -
    9 Switch Valve Fault - 1 - - 1 1

    Page 3 of 5
    Macawber Beekay Limited, New Delhi
    Digital Digital Interposing PC PC PC
    Sl No. Input / Output Description Remarks
    Input Output Relay Command Indication Alarm

    I ESP 1st FIELD (SYSTEM-23)


    I-1 Denseveyor- (V-23)
    1 Surge Hopper Level High 1 - - - 1 -
    2 Inlet Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Vessel Pressure Switch Low (PS-2) 1 - - - 1 -
    4 Convey Air Pressure Switch (PS-4) 1 - - - 1 -
    5 System Probe Mode - - - 1 - -
    6 System Timer Mode - - - 1 - -
    7 System Start/Stop 1 - - 1 1 -
    8 Probe Over ride Push Button 1 - - 1 - -
    9 Purge Push Button 1 - - 1 - -
    10 Inlet Dome Valve Open Solenoid - 1 1 - - -
    11 Convey ON Solenoid - 1 1 - - -
    12 Cycle On - - - - 1 -
    13 Line Block - - - - 1 1
    14 System Fault - - - - 1 1
    15 Cycle Counter - - - - 1 -
    16 Seal Fail - - - - 1 1
    17 Cycle not starting - - - - 1 1
    18 Convey Air Fail - - - - 1 1
    I-2 SWITCH VALVE (1/2 WAY) SV-7
    1 Route -1 Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    2 Route -2 Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Route -1 Dome Valve Open Limit Switch 1 - - - 1 -
    4 Route -2 Dome Valve Open Limit Switch 1 - - - 1 -
    5 Route -1 Dome Valve Open Solenoid - 1 1 - - -
    6 Route -2 Dome Valve Open Solenoid - 1 1 - - -
    7 Route -1 Selected - - - 1 - -
    8 Route -2 Selected - - - 1 - -
    9 Switch Valve Fault - 1 - - 1 1

    J ESP 2nd FIELD (SYSTEM-24) (FIRING SEQUANCE 1+2)


    J-1 Ash Vessel (Master) (V-241)
    1 Surge Hopper Level High 1 - - - 1 -
    2 Inlet Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Vessel Pressure Switch Low (PS-2) 1 - - - 1 -
    4 Vessel Pressure Switch High (PS-3) 1 - - - 1 -
    5 Convey Air Pressure Switch (PS-4) 1 - - - 1 -
    6 System Probe Mode - - - 1 - -
    7 System Timer Mode - - - 1 - -
    8 System Start/Stop 1 - - 1 1 -
    9 Probe Over ride Push Button 1 - - 1 - -
    10 Purge Push Button 1 - - 1 - -
    11 Inlet Dome Valve Open Solenoid - 1 1 - - -
    12 Convey ON Solenoid - 1 1 - - -
    13 Cycle On - - - - 1 -
    14 Line Block - - - - 1 1
    15 System Fault - - - - 1 1
    16 Cycle Counter - - - - 1 -
    17 Seal Fail - - - - 1 1
    18 Cycle not starting - - - - 1 1
    19 Convey Air Fail - - - - 1 1
    ESP 3rd FIELD (SYSTEM-24) (EXISTING)
    J-2 Ash Vessel (Slave-1) (V-242)
    1 Surge Hopper Level High 1 - - - 1 -
    2 Inlet Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Probe Over ride Push Button 1 - - 1 - -
    4 Inlet Dome Valve Open Solenoid - 1 1 - - -
    5 Cycle On - - - - 1 -
    6 Cycle Counter - - - - 1 -
    7 Seal Fail - - - - 1 1
    8 Cycle not starting - - - - 1 1
    ESP 4rd FIELD (SYSTEM-4) (EXISTING)
    J-3 Ash Vessel (Slave-2) (V-243)
    1 Inlet Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    2 Inlet Dome Valve Open Solenoid - * - - - - See Note
    3 Seal Fail - - - - 1 1
    NOTE: *Inlet dome valve solenoid of Slave Vessel-2 shall also open from output of Slave Vessel-1 inlet dome valve open Solenoid.
    J-4 SWITCH VALVE (1/2 WAY) SV-8 (EXISTING)
    1 Route -1 Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    2 Route -2 Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Route -1 Dome Valve Open Limit Switch 1 - - - 1 -
    4 Route -2 Dome Valve Open Limit Switch 1 - - - 1 -
    5 Route -1 Dome Valve Open Solenoid - 1 1 - - -
    6 Route -2 Dome Valve Open Solenoid - 1 1 - - -
    7 Route -1 Selected - - - 1 - -

    Page 4 of 5
    Macawber Beekay Limited, New Delhi
    Digital Digital Interposing PC PC PC
    Sl No. Input / Output Description Remarks
    Input Output Relay Command Indication Alarm

    8 Route -2 Selected - - - 1 - -
    9 Switch Valve Fault - 1 - - 1 1
    K AIR RECEIVER
    1 Pressure Switch 1 - - - 1 -
    L STACK HOPPER (SYSTEM-31) (EXISTING)
    L-1 Densveyor- (V-5)
    1 Inlet Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    2 Vessel Pressure Switch Low (PS-2) 1 - - - 1 -
    3 Convey Air Pressure Switch (PS-4) 1 - - - 1 -
    4 System Probe Mode - - - 1 - -
    5 System Timer Mode - - - 1 - -
    6 System Start/Stop 1 - - 1 1 -
    7 Probe Over ride Push Button 1 - - 1 - -
    8 Purge Push Button 1 - - 1 - -
    9 Inlet Dome Valve Open Solenoid - 1 1 - - -
    10 Convey ON Solenoid - 1 1 - - -
    11 Cycle On - - - - 1 -
    12 Line Block - - - - 1 1
    13 System Fault - - - - 1 1
    14 Cycle Counter - - - - 1 -
    15 Seal Fail - - - - 1 1
    16 Cycle not starting - - - - 1 1
    17 Convey Air Fail - - - - 1 1
    L-2 SWITCH VALVE (1/2 WAY) SV-9 (EXISTING)
    1 Route -1 Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    2 Route -2 Dome Valve Seal Pressure Switch (PS-1) 1 - - - 1 -
    3 Route -1 Dome Valve Open Limit Switch 1 - - - 1 -
    4 Route -2 Dome Valve Open Limit Switch 1 - - - 1 -
    5 Route -1 Dome Valve Open Solenoid - 1 1 - - -
    6 Route -2 Dome Valve Open Solenoid - 1 1 - - -
    7 Route -1 Selected - - - 1 - -
    8 Route -2 Selected - - - 1 - -
    9 Switch Valve Fault - 1 - - 1 1
    Notes:
    1 All I/O's are in Purchacer's scope of supply.
    2 This I/O's list is for complete Ash handling system including the existing system. Purchaser to varify the existing system I/Os at their end.
    3 Complete Pneumatic Conveying System shall be Controlled & Monitored through Purchaser's PLC / PC System.
    4 Control voltage for solenoid valves and level probes : 110V AC & PLC Interrogation voltage for I/O's 24V DC.
    5 Any I/O's requirement of Purhaser's compressors are not indicated in this schedule.

    Page 5 of 5

    You might also like