Service Manual: PPP PP P

e Ver.
2
Please refer to the
MODIFICATION NOTICE.
SERVICE MANUAL
MODEL JP E3 E2 EK EA E1 E1C E1K
AVR-X2100W P P P P P
AVR-S900W P
INTEGRATED NETWORK AV RECEIVER
• For purposes of improvement, specifications and design are subject to change without notice.
• Please use this service manual with referring to the operating instructions without fail.
• Some illustrations using in this service manual are slightly different from the actual set.
e
D&M Holdings Inc.
S0870-1V02DM/DG1407 Copyright 2014 D&M Holdings Inc. All rights reserved.

WARNING: Violators will be prosecuted to the maximum extent possible.
Downloaded from www.Manualslib.com manuals search engine

CONTENTS
ABOUT THIS MANUAL..............................................................3 TROUBLE SHOOTING.............................................................80
What you can do with this manual.............................................3 1. POWER...............................................................................80
Using Adobe Reader (Windows version)...................................4 2. Analog video.......................................................................81
SAFETY PRECAUTIONS...........................................................6 3. HDMI/DVI............................................................................85
NOTE FOR SCHEMATIC DIAGRAM..........................................7 4. AUDIO.................................................................................87
5. Network/Bluetooth/USB......................................................90
NOTE FOR PARTS LIST............................................................7
6. SMPS..................................................................................95
TECHNICAL SPECIFICATIONS for AVR-X2100W...................9
CLOCK FLOW & WAVE FORM IN DIGITAL BLOCK..............97
DIMENSION for AVR-X2100W..................................................9
LEVEL DIAGRAM.....................................................................98
TECHNICAL SPECIFICATIONS for AVR-S900W...................10
BLOCK DIAGRAM..................................................................104
DIMENSION for AVR-S900W..................................................10
POWER DIAGRAM.................................................................105
Precautions During Service...................................................11
WIRING DIAGRAM.................................................................106
Initializing This Unit..................................................................11
Service Jigs..............................................................................11 PRINTED WIRING BOARDS..................................................107
DISASSEMBLY.........................................................................12 SCHEMATIC DIAGRAMS (1/30 )...........................................113
1. FRONT PANEL ASSY.........................................................14 01-HDMI SW1........................................................................113
2. RADIATOR ASSY................................................................15 02-HDMI SW2........................................................................114
3. HDMI PCB...........................................................................16 03-NET_PHY.........................................................................115
4. VIDEO PCB.........................................................................17 04-BlueTooth..........................................................................116
5. MAIN PCB..........................................................................17 05-CPU_LEVEL_CHG...........................................................117
6. SMPS PCB..........................................................................18 06-DIGITAL_CNT...................................................................118
7. TRANS POWER.................................................................18 07-CPU..................................................................................119
08-Sub_CPU..........................................................................120
SPECIAL MODE.......................................................................19
09-FRONT_HDMI..................................................................121
Special Mode Configuration Buttons (for AVR-X2100W).........19
10-DSP...................................................................................122
Special Mode Configuration Buttons (for AVR-S900W)...........20
11-ADV8003...........................................................................123
1. Version Display Mode.........................................................21
12-ADV8003_DDR.................................................................124
2. PANEL / REMOTE LOCK Selection Mode..........................25
13-D.SUPPLY.........................................................................125
3. Selection Modes for Service-related Operations.................26
14-HDMI_TX..........................................................................126
DIAGNOSTIC PATH DIAGRAM...............................................30
15-DIR_A.PLD.......................................................................127
4. Remote ID Setup Mode.......................................................54
16-V.PLD................................................................................128
5. Protection Pass Mode.........................................................55
17-MAIN_DAC.......................................................................129
6. CX870 / CY920 Reboot mode.............................................55
18-ADV7850...........................................................................130
7. CX870 / CY920 Initialization mode.....................................56
19-CX870JUNCTION.............................................................131
JIG FOR SERVICING...............................................................57
20-INPUT...............................................................................132
Procedure after Replacing the Microprocessor, etc............60 21-VIDEO_ZONE2.................................................................133
Firmware Update Procedure..................................................60 22-VIDEO_FCNT...................................................................134
1. Updating by USB.................................................................60 23-VIDEO_RC5......................................................................135
2. Updating by DPMS..............................................................69 24-AMP1................................................................................136
ADJUSTMENT..........................................................................76 25-AMP2................................................................................137
SURROUND MODES AND PARAMETERS.............................77 26-MAIN_SPK........................................................................138
27-MAIN_TUNER_REG.........................................................139
28-MAIN_RS232-CNT...........................................................140
29-FRONT..............................................................................141
30-SMPS................................................................................142
EXPLODED VIEW ..................................................................143
PACKING VIEW......................................................................145
SEMICONDUCTORS..............................................................146
1. IC's....................................................................................146
2. FL DISPLAY......................................................................165

ABOUT THIS MANUAL
Read the following information before using the service manual.
What you can do with this manual
Search for a Ref. No. (phrase) Jump to the target of a schematic

(Ctrl+Shift+F) diagram connector
You can use the search function in Acrobat Reader to

search for a Ref. No. in schematic diagrams, printed
Click the Ref. No. of the target connector in the red
wiring circuit diagrams, block diagrams, and parts
box around a schematic diagram connector.
lists.
•The screen jumps to the target connector.
1.Press Ctrl+Shift+F on the keyboard.

• The Search window appears.
CP401
v
F
Shift
Ctrl
2.Enter the Ref. No. you want to search for in the

Search window, and then click the Search button. CP106
•A list of search results appears.
•Page magnification stays the same as before the

jump.
3.Click an item on the list.

• The screen jumps to the page for that item, and the
search phrase is displayed.

Using Adobe Reader (Windows version)
Add notes to this data (Sign) Magnify schematic / printed circuit

The Sign function lets you add notes to the data in board diagrams - 1
this manual. (Ctrl+Space, mouse operation)
Save the file once you have finished adding notes.
Press Ctrl+Space on the keyboard and drag the
[Example using Adobe Reader X] mouse to select the area you want to view.
On the "View" menu, click "Sign".
• The selected area is magnified.
• The Sign pane appears.
Ctrl Space
• When you want to move the area shown, hold

down Space and drag the mouse.
[Example using Adobe Reader 9]

On the "Document" menu, click "Sign". • When you want to show a full page view, press
Ctrl+0 on the keyboard.
Print a magnified part of the manual

The Properties dialog box and functions will vary depending on your printer.
1. Drag the mouse to magnify the part you want to print.
2. On the "File" menu, click "Print".
3. Configure the following settings in the Print dialog box.
• Properties
Click this button and check that the printer is set to a
suitable paper size.
• Page to print
Select the following checkbox.
"More Options" : "Current View"
• Page Sizing & Handling
Select the following checkbox.
"Size" / "Size Options" : "Fit"
4. Click the Print button to start printing.

Magnify schematic / printed circuit Magnify schematic / printed circuit
board diagrams - 2 board diagrams - 3
(Pan & Zoom function) (Loupe Tool function)
The Pan & Zoom function lets you see which part of The Loupe Tool function lets you magnify a specific
a magnified diagram is being shown in a separate part of a diagram in a separate window.
window.
[Example using Adobe Reader X]
[Example using Adobe Reader X] On the "View" menu, point to "Zoom", and then click
On the "View" menu, point to "Zoom", and then click "Loupe Tool".
"Pan & Zoom".
• The Loupe Tool window appears on the screen.

• The Pan & Zoom window appears on the screen.
[Example using Adobe Reader 9] [Example using Adobe Reader 9]

On the "Tools" menu, point to "Select & Zoom", and On the "Tools" menu, point to "Select & Zoom", and
then click "Pan & Zoom Window". then click "Loupe Tool Window".

SAFETY PRECAUTIONS
The following items should be checked for continued protection of the customer and the service technician.
leakage current check
Before returning the set to the customer, be sure to carry out either (1) a leakage current check or (2) a line to chassis
resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the
power cord is less than 460 kohms, the set is defective.
Be sure to test for leakage current with the AC plug in both polarities, in addition, when the set's power is in each state
(on, off and standby mode), if applicable.
CAUTION Please heed the following cautions and instructions during servicing and
inspection.
◎◎ Heed the cautions! ◎◎ Make a safety check after servicing!
Cautions which are delicate in particular for servicing Check that all screws, parts and wires removed or
are labeled on the cabinets, the parts and the chassis, disconnected when servicing have been put back in their
etc. Be sure to heed these cautions and the cautions original positions, check that no serviced parts have
described in the handling instructions. deteriorate the area around. Then make an insulation
◎◎ Cautions concerning electric shock! check on the external metal connectors and between
(1) A n AC voltage is impressed on this set, so if you the blades of the power plug, and otherwise check that
touch internal metal parts when the set is energized, safety is ensured.
you may get an electric shock. Avoid getting an (Insulation check procedure)
electric shock, by using an isolating transformer Unplug the power cord from the power outlet, disconnect
and wearing gloves when servicing while the set is the antenna, plugs, etc., and on the power. Using a 500V
energized, or by unplugging the power cord when insulation resistance tester, check that the insulation
replacing parts, for example. resistance value between the inplug and the externally
(2) There are high voltage parts inside. Handle with exposed metal parts (antenna terminal, headphones
extra care when the set is energized. terminal, input terminal, etc.) is 1MΩ or greater. If it is
◎◎ C
aution concerning disassembly and less, the set must be inspected and repaired.
assembly!
Through great care is taken when parts were
manufactured from sheet metal, there may be burrs on
the edges of parts. The burrs could cause injury if fingers
are moved across them in some rare cases. Wear gloves CAUTION Concerning important
to protect your hands. safety parts
◎◎ Use only designated parts! Many of the electric and the structural parts used in the
The set's parts have specific safety properties (fire set have special safety properties. In most cases these
resistance, voltage resistance, etc.). Be sure to use parts properties are difficult to distinguish by sight, and the use
which have the same properties for replacement. The of replacement parts with higher ratings (rated power
burrs have the same properties. In particular, for the and withstand voltage) does not necessarily guarantee
important safety parts that are indicated by the z mark that safety performance will be preserved. Parts with
on schematic diagrams and parts lists, be sure to use safety properties are indicated as shown below on the
the designated parts. wiring diagrams and the parts list in this service manual.
◎◎ B
e sure to mount parts and arrange the wires Be sure to replace them with the parts which have the
as they were originally placed! designated part number.
For safety seasons, some parts use tapes, tubes or other
insulating materials, and some parts are mounted away (1) Schematic diagrams........Indicated by the z mark.
from the surface of printed circuit boards. Care is also (2) Parts lists........Indicated by the z mark.
taken with the positions of the wires by arranging them The use of parts other than the
and using clamps to keep them away from heating and designated parts could cause electric
high voltage parts, so be sure to set everything back as shocks, fires or other dangerous
it was originally placed. situations.

NOTE FOR SCHEMATIC DIAGRAM
WARNING:
Parts indicated by the z mark have critical characteristics. Use ONLY replacement parts recommended by the manufacturer.
CAUTION:
Before returning the set to the customer, be sure to carry out either (1) a leakage current check or (2) a line to chassis resistance check.
If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the power cord is less than 460 kohms, the
set is defective.
WARNING:
DO NOT return the set to the customer unless the problem is identified and remedied.
NOTICE:
ALL RESISTANCE VALUES IN OHM. k=1,000 OHM / M=1,000,000 OHM
ALL CAPACITANCE VALUES ARE EXPRESSED IN MICRO FARAD, UNLESS OTHERWISE INDICATED. P INDICATES MICRO-MICRO
FARAD. EACH VOLTAGE AND CURRENT ARE MEASURED AT NO SIGNAL INPUT CONDITION. CIRCUIT AND PARTS ARE SUBJECT
TO CHANGE WITHOUT PRIOR NOTICE.
NOTE FOR PARTS LIST

1. Parts indicated by "nsp" on this table cannot be supplied.
2. When ordering a part, make a clear distinction between "1" and "I" (i) to avoid mis-supplying.
3. A part ordered without specifying its part number can not be supplied.
4. Part indicated by " ★ " mark is not illustrated in the exploded view.
WARNING: Parts indicated by the z mark have critical characteristics. Use ONLY replacement parts recommended by the manufacturer.
INSTRUCTIONS FOR HANDLING SEMI-CONDUCTORS AND OPTICAL UNIT

Electrostatic breakdown of the semi-conductors or optical pickup may occur due to a potential difference caused by
electrostatic charge during unpacking or repair work.
1. Ground for Human Body

Be sure to wear a grounding band (1 MΩ) that is properly grounded to remove any static electricity that may be
charged on the body.
2. Ground for Workbench

Be sure to place a conductive sheet or copper plate with proper grounding (1 MΩ) on the workbench or other surface,
where the semi-conductors are to be placed. Because the static electricity charge on clothing will not escape through
the body grounding band, be careful to avoid contacting semi-conductors with your clothing
<Incorrect> <Correct> Grounding Band
1MΩ
CBA
CBA
1MΩ
Conductive Sheet or
Copper Plate

Personal notes:

TECHNICAL SPECIFICATIONS FOR AVR-X2100W
nn Audio section Network type
• Power amplifier (wireless LAN standard): Conforming to Wi-Fi®z1
Rated output : Security : WEP 64 bit, WEP 128 bit
WPA/WPA2-PSK (AES)
Front : WPA/WPA2-PSK (TKIP)
95W+95W(8Ω, 20Hz - 20kHz with 0.08% T.H.D.)
125W+125W(6Ω, 1kHz with 0.7% T.H.D) Radio frequency : 2.4 GHz
Center :
No. of channels : 1 - 11 ch (for E3)
95W(8Ω, 20Hz - 20kHz with 0.08% T.H.D.) 1 - 13 ch (for E2, E1, E1C, JP)
125W(6Ω, 1 kHz with 0.7 % T.H.D.)
Surround : z1 T
he Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product
95W+95W(8Ω, 20 Hz - 20 kHz with 0.08% T.H.D.) Logo are registered trademarks of the Wi-Fi Alliance.
125W+125W(6Ω, 1 kHz with 0.7 % T.H.D.)
Surround back: nn Bluetooth section
95W+95W(8Ω, 20 Hz - 20 kHz with 0.08% T.H.D.) Communications system : B
luetooth Version 2.1 + EDR
125W+125W(6Ω, 1 kHz with 0.7 % T.H.D.) (Enhanced Data Rate)
Output connectors : 4 - 16Ω Transmission power : Maximum 2.5 mW (Class 2)
nn Analog section
Maximum communication range : Approx. 32.8 ft/10 m 2 in line of sight
Input sensitivity/Input impedance : 200 mV/47 kΩ
Frequency response : 10 Hz - 100 kHz — +1, -3 dB(Direct mode) Frequency band : 2.4 GHz band
S/N : 100 dB(IHF-A weighted, Direct mode)
Modulation scheme : FHSS (Frequency-Hopping Spread Spectrum)
nn Video section
Input sensitivity/Input impedance : Y signal — 1 Vp-p, 75 Ω Supported profiles : A2DP 1.2 (Advanced Audio Distribution Profile)
PB / CB signal — 0.7 Vp-p, 75 Ω AVRCP 1.4 (Audio Video Remote Control Profile)
PR / CR signal — 0.7 Vp-p, 75 Ω
Corresponding codec : SBC, AAC
Frequency response : 5 Hz - 60 MHz — 0, -3 dB
nn Tuner section Transmission range (A2DP) : 20 Hz - 20,000 Hz
FM
Reception frequency range : FM 87.5 MHz - 107.9 MHz(for E3)
nn General
FM 87.5 MHz - 108.0 MHz(for E2,E1. E1C) Power supply : (for E3) : AC 120 V, 60 Hz
FM 76.0 MHz - 90.0 MHz(for JP) (for E2/E1) : AC 230 V, 50 Hz / 60Hz
AM 520 kHz - 1710 kHz(for E3) (for E1C) : AC 220 V, 50 Hz
AM 522 kHz - 1611 kHz(for E2,E1. E1C) (for JP) : AC 100V, 50/60Hz
AM 522 kHz - 1629 kHz(for JP) Power consumption : 500W
Effective sensitivity : F
M 1.2μV(12.8dBf) Power consumption in standby mode : 0.1W
AM 18 μV
Power consumption in CEC standby mode : 0.5W
50 dB sensitivity : MONO ― 2.8 μV (20.2 dBf)
Power consumption in network standby mode : 2.7W
S/N: MONO ― 70 dB (IHF-A weighted, Direct mode)
STEREO ― 67 dB (IHF-A weighted, Direct mode) For purposes of improvement, specifications and design are subject to
change without notice.
Distortion : MONO ― 0.7 % (1 kHz)
SRETEO ― 1.0 % (1 kHz)
nn Wireless LAN section
DIMENSION FOR AVR-X2100W

Unit： Unit : in. (mm) Weight： 21 lb 6 oz (9.7 kg)
1 17/64
(32)
2 23/32
(69)
11 11/32 (288)
13 11/32 (339)
6 1/2 (165)
2 1/8
(54)
(19)
3/4
17 3/32 (434)
5 63/64 (152)
6 37/64 (167)
9 1/4 (235)
19/32
(15)
2 23/64
(60)
1 49/64 (45) 13 35/64 (344) 1 49/64 (45)

TECHNICAL SPECIFICATIONS FOR AVR-S900W
nn Audio section
nn Wireless LAN section
• Power amplifier
Network type
Rated output : (wireless LAN standard): Conforming to Wi-Fi®z1
Front : Security : WEP 64 bit, WEP 128 bit
90W+90W(8Ω, 20Hz - 20kHz with 0.08% T.H.D.) WPA/WPA2-PSK (AES)
125W+125W(6Ω, 1kHz with 0.7% T.H.D) WPA/WPA2-PSK (TKIP)
Center :
90W(8Ω, 20Hz - 20kHz with 0.08% T.H.D.) Radio frequency : 2.4 GHz
125W(6Ω, 1 kHz with 0.7 % T.H.D.)
No. of channels : 1 - 11 ch
Surround :
90W+90W(8Ω, 20 Hz - 20 kHz with 0.08% T.H.D.) z1 T
he Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product
125W+125W(6Ω, 1 kHz with 0.7 % T.H.D.) Logo are registered trademarks of the Wi-Fi Alliance.
Surround back:
90W+90W(8Ω, 20 Hz - 20 kHz with 0.08% T.H.D.) nn Bluetooth section
125W+125W(6Ω, 1 kHz with 0.7 % T.H.D.) Communications system : B
luetooth Version 2.1 + EDR
Output connectors : 4 - 16Ω (Enhanced Data Rate)
nn Analog section Transmission power : Maximum 2.5 mW (Class 2)
Input sensitivity/Input impedance : 200 mV/47 kΩ
Maximum communication range : Approx. 32.8 ft/10 m 2 in line of sight
Frequency response : 10 Hz - 100 kHz — +1, -3 dB(Direct mode)
S/N : 100 dB(IHF-A weighted, Direct mode) Frequency band : 2.4 GHz band
nn Video section Modulation scheme : FHSS (Frequency-Hopping Spread Spectrum)
Input sensitivity/Input impedance : Y signal — 1 Vp-p, 75 Ω
PB / CB signal — 0.7 Vp-p, 75 Ω Supported profiles : A2DP 1.2 (Advanced Audio Distribution Profile)
PR / CR signal — 0.7 Vp-p, 75 Ω AVRCP 1.4 (Audio Video Remote Control Profile)
Frequency response : 5 Hz - 60 MHz — 0, -3 dB
Corresponding codec : SBC, AAC
nn Tuner section
FM Transmission range (A2DP) : 20 Hz - 20,000 Hz
Reception frequency range : FM 87.5 MHz - 107.9 MHz
AM 520 kHz - 1710 kHz nn General
Effective sensitivity : F
M 1.2μV(12.8dBf) Power supply : (for E3) : AC 120 V, 60 Hz
AM 18 μV Power consumption : 460W
50 dB sensitivity : MONO ― 2.8 μV (20.2 dBf) Power consumption in standby mode : 0.1W
S/N: MONO ― 70 dB (IHF-A weighted, Direct mode) Power consumption in CEC standby mode : 0.5W
STEREO ― 67 dB (IHF-A weighted, Direct mode)
Power consumption in network standby mode : 2.7W
Distortion : MONO ― 0.7 % (1 kHz)
SRETEO ― 1.0 % (1 kHz) For purposes of improvement, specifications and design are subject to
change without notice.
DIMENSION FOR AVR-S900W

Unit： Unit : in. (mm) Weight： 21 lb 6 oz (9.7 kg)
1 17/64
(32)
2 23/32
(69)
11 11/32 (288)
13 11/32 (339)
6 1/2 (165)
2 1/8
(54)
(19)
3/4
17 3/32 (434)
5 63/64 (152)
6 37/64 (167)
9 1/4 (235)
19/32
(15)
2 23/64
(60)
1 49/64 (45) 13 35/64 (344) 1 49/64 (45)
10

PRECAUTIONS DURING SERVICE
Initializing This Unit
Initialize this unit if you have replaced the microcomputer, one of the parts around the microcomputer, or the digital PCB.
1. Press the power button to turn off the power.

2. AVR-X2100W
Hold down buttons "ZONE2 SOURCE" and "DIMMER" at the same time and press the power button to turn on the
power.
AVR-S900W
Hold down buttons TUNER PRESET CH + and "TUNE -" at the same time and press the power button to turn on the
power.
3. Release the buttons after confirming that the display flashes in intervals of approximately 1 second.
＊ The unit is initialized.
NOTE： • If the status in step 3 does not occur, start again from step 1.
• Initializing the device restores settings configured by the user to the factory settings. Take note of your settings beforehand
and reconfigure them after initialization.
AVR-X2100W
MASTER VOLUME
SOURCE SELECT
TUNER ZONE2 ZONE2 MEDIA

PRESET CH ON/OFF SOURCE
DIMMER S TAT U S 1 CB L /S A T 2 Blu-ray 3 PLAYER 4 ONLINE
QUICK SELECT
PHONES AUX 1 - HDMI SETUP MIC
X ZONE2 SOURCE DIMMER
AVR-S900W
MASTER VOLUME
SOURCE SELECT
ZONE2 ON/OFF ZONE2 SOURCE TUNER TUNE BAND MODE DIMMER STATUS
PRESET CH
1 CBL/SAT 2 Blu-ray 3 GAME 4 ONLINE
QUICK SELECT
PHONES
INFO MOVIE MUSIC GAME PURE AUX 1 - HDMI SETUP MIC
SOUND MODE
X TUNER PRESET CH + TUNING －
Service Jigs
The following jigs (extension cable kit) are used when repairing the PCBs.
Order the jigs from your dealer if necessary.
8U- 110084S : EXTENSION UNIT KIT : 1 Set

(See 57 page)
11

DISASSEMBLY
• Remove each part in the order of the arrows below.
• Reassemble removed parts in the reverse order.
• Read "Precautions During Work" before reassembling removed parts.
• If wire bundles are removed or moved during adjustment or part replacement, reshape the wires after completing the
work. Failure to shape the wires correctly may cause problems such as noise.
TOP COVER
FRONT PANEL ASSY HDMI PCB ASSY SMPS PCB

See "DISASSEMBLY" See "DISASSEMBLY" See "DISASSEMBLY"
1. FRONT PANEL ASSY 3. HDMI PCB ASSY 6. SMPS PCB
and "EXPLODED VIEW" and "EXPLODED VIEW" and "EXPLODED VIEW"
FRONT HDMI PCB HDMI PCB SMPS PCB
(Ref. No. of EXPLODED VIEW : P1) (Ref. No. of EXPLODED VIEW : P13) (Ref. No. of EXPLODED VIEW : P8)
FRONT PCB CX870 MIDDLE PCB
(Ref. No. of EXPLODED VIEW : P3) (Ref. No. of EXPLODED VIEW : P20)
FUNCTION PCB CX870 MODULE
CNT PCB RS232C PCB
F/H_GUIDE PCB RS CNT PCB
BLUETOOTH PCB
(Ref. No. of EXPLODED VIEW : P16)
VIDEO PCB ASSY MAIN TRANS
See "DISASSEMBLY" See "DISASSEMBLY"
RADIATOR ASSY 4. VIDEO PCB ASSY 7. MAIN TRANS
See "DISASSEMBLY" and "EXPLODED VIEW" and "EXPLODED VIEW"
2. RADIATOR ASSY VIDEO PCB MAIN TRANS
and "EXPLODED VIEW" (Ref. No. of EXPLODED VIEW : P12) (Ref. No. of EXPLODED VIEW : 13)
AMP PCB
GUIDE L PCB MAIN PCB ASSY
(Ref. No. of EXPLODED VIEW : P17) See "DISASSEMBLY"
TOP_GUIDE PCB 5. MAIN PCB ASSY
(Ref. No. of EXPLODED VIEW : P18) and "EXPLODED VIEW"
GUIDE R PCB MAIN PCB
FRONT CNT PCB
INPUT PCB
12

Explanatory Photos for DISASSEMBLY
• The angles from which the photos are taken are shown by "Photo angle: A, B, C, D".
• See the diagram below about the shooting direction of each photograph.
• Photographs with no shooting direction indicated were taken from the top of the unit.
• The photograph is AVR-X2100WE3 model.
The viewpoint of each photograph
(Shooting direction:X)[View from the top]
↓Shooting direction: B↓ Front side
Shooting Shooting
direction: D direction: C
↑Shooting direction: A↑
13

1. FRONT PANEL ASSY
Proceeding : TOP COVER → FRONT PANEL ASSY
(1) Remove the screws.
View from the bottom
(2) Cut the wire clamp, then remove the connector wires and FFC. Remove the screws.
Front side
CP4400
STYLE PIN
FFC
CUT
FFC
N7002
N7005
14

2. RADIATOR ASSY
Proceeding : TOP COVER → FRONT PANEL ASSY → RADIATOR ASSY
(2) Remove the STYLE PIN. Remove the screws.
STYLE PIN
(3) Remove the connector wire.
CP401
CP402 CP405
CP403
15

3. HDMI PCB
Proceeding : TOP COVER → BACK CHASSIS → HDMI PCB
(2) Cut the wire clamp, then remove the connector wires and FFC.
Front side
STYLE PIN
FFC
CUT
FFC
CON1 N1029
CON2
N7002 CUT
N7005
STYLE PIN

Front side
N1018 N1033
N1014
N1015
N1013
N1016
16

4. VIDEO PCB
Proceeding : TOP COVER → BACK CHASSIS → HDMI PCB → VIDEO PCB
Front side
CN5004 CN5001 CN5000
CN5003
5. MAIN PCB
Proceeding : TOP COVER → BACK CHASSIS → HDMI PCB → VIDEO PCB → MAIN PCB
17

CP401
CP402 CP405
CP403
(3) Remove the connector wire. Remove the screws.

CN4212
CP5003
6. SMPS PCB
Proceeding : TOP COVER → BACK CHASSIS → SMPS PCB
(1) Remove the connector wire. Remove the screws.
CP4142
TO HDMI PCB
N1029
7. TRANS POWER
Proceeding : TOP COVER → BACK CHASSIS → HDMI PCB → TRANS POWER
See "EXPLODED VIEW" for instructions on how to remove each PCB of the "TRANS POWER".
18

SPECIAL MODE
Special Mode Configuration Buttons (for AVR-X2100W)
b No. 1 - 13 : Hold down buttons A, B and C at the same time and press the power button to turn on the power.
b No. 14： Press the A and B buttons simultaneously while inserting the AC plug to turn the power on.
No. Mode Button A Button B Button C Contents
Displays the version of firmware such as the main firm-

Version Display
1 DIMMER STATUS - ware or DSP, etc. Errors that have occurred are displayed.
(u-COM / DSP Error Display)
(See 21 page)
ZONE2 Displays the protection occurrence history.
2 Protection History Display Mode DIMMER STATUS
SOURCE (See 50 page)
This is a special mode for service confirmation used dur-
Check the Video/Audio pass ing repair work to simplify the confirmation work for the
3 ↑ ↑ ↑
Mode Audio channel/video channel.
(See 28 page)
If there are multiple DENON AV receivers in the same area,
this mode stops the other AV receivers from being oper-
4 Remote ID Setup Mode ↑ ↑ ↑
ated concurrently with this device.
(See 54 page)
Enables reception STEP of the ANALOG TUNER to be
5 TUNER step ↑ ↑ ↑ changed.
(See 53 page)
Displays the total operating time of the set, number of
times the power was switched on, and number of occur-
6 Operation INFO ↑ ↑ ↑
rences of each protection.
(See 52 page)
User Initialization mode TUNER TUNER
Initializes backup data.
7 (Settings for the Installer Setup are PRESET PRESET -
(Settings for the Installer Setup are not initialized.)
not initialized.) CH - CH +
Factory Initialization mode
ZONE2 Initializes backup data.
8 (Initialization includes settings for the DIMMER -
SOURCE (Initialization includes settings for the Installer Setup.)
Installer Setup.)
TUNER Start this unit in the PANEL/REMOTE LOCK selection mode
Mode for preventing remote ZONE2
9 PRESET - so that PANEL LOCK and Remote Lock can be selected as
control acceptance SOURCE
CH + ON or OFF. (See 25 page)
This function prevents reception of all keys/encoders
PANEL LOCK mode
10 ↑ ↑ - (including VOLUME) other than the power supply button
(with Volume)
on the Front Panel.
This function prevents reception of all keys/encoders
PANEL LOCK mode
11 ↑ ↑ - other than the power supply button and VOLUME encoder
(without Volume)
on the Front Panel.
12 Panel Lock Release ↑ ↑ - Function for Releasing the PANEL LOCK
TUNER Enables the power to be turned on when protection de-
ZONE2
13 Protection pass mode PRESET STATUS tection is in the stopped state.
SOURCE
CH + (See 55 page)
TUNER Mode used when this unit cannot be recovered.
14 Forced USB All Device Write Mode PRESET STATUS - Forcibly switches this unit to USB update mode.
CH + (See 62 page)
MASTER VOLUME
SOURCE SELECT
TUNER ZONE2 ZONE2 MEDIA

PRESET CH ON/OFF SOURCE
QUICK SELECT
PHONES AUX 1 - HDMI SETUP MIC
X TUNER ZONE2 STATUS

PRESET CH - SOURCE
TUNER DIMMER
PRESET CH +
19

Special Mode Configuration Buttons (for AVR-S900W)
b No. 1 - 13 : Hold down buttons A, B and C at the same time and press the power button to turn on the power.
b No. 14： Press the A and B buttons simultaneously while inserting the AC plug to turn the power on.
No. Mode Button A Button B Button C Contents
Displays the version of firmware such as the main firmware

Version Display
1 DIMMER STATUS - or DSP, etc. Errors that have occurred are displayed. (See
(u-COM / DSP Error Display)
21 page)
TUNER
Displays the protection occurrence history.
2 Protection History Display Mode PRESET TUNE - TUNE +
(See 50 page)
CH +
This is a special mode for service confirmation used during
Check the Video/Audio pass repair work to simplify the confirmation work for the Audio
3 ↑ ↑ ↑
Mode channel/video channel.
(See 28 page)
If there are multiple DENON AV receivers in the same area,
this mode stops the other AV receivers from being oper-
4 Remote ID Setup Mode ↑ ↑ ↑
ated concurrently with this device.
(See 54 page)
Enables reception STEP of the ANALOG TUNER to be
5 TUNER step ↑ ↑ ↑ changed.
(See 53 page)
Displays the total operating time of the set, number of
times the power was switched on, and number of occur-
6 Operation INFO ↑ ↑ ↑
rences of each protection.
(See 52 page)
User Initialization mode TUNER TUNER
7 (Settings for the Installer Setup are PRESET PRESET -
(Settings for the Installer Setup are not initialized.)
not initialized.) CH - CH +
Factory Initialization mode TUNER
8 (Initialization includes settings for the PRESET TUNE - -
(Initialization includes settings for the Installer Setup.)
Installer Setup.) CH +
TUNER Start this unit in the PANEL/REMOTE LOCK selection mode
Mode for preventing remote ZONE2
9 PRESET - so that PANEL LOCK and Remote Lock can be selected as
control acceptance SOURCE
CH + ON or OFF. (See 25 page)
This function prevents reception of all keys/encoders (in-
PANEL LOCK mode
10 ↑ ↑ - cluding VOLUME) other than the power supply button on
(with Volume)
the Front Panel.
This function prevents reception of all keys/encoders other
PANEL LOCK mode
11 ↑ ↑ - than the power supply button and VOLUME encoder on
(without Volume)
the Front Panel.
12 Panel Lock Release ↑ ↑ - Function for Releasing the PANEL LOCK
TUNER Enables the power to be turned on when protection de-
ZONE2
13 Protection pass mode PRESET TUNE + tection is in the stopped state.
SOURCE
CH + (See 55 page)
Mode used when this unit cannot be recovered.
ZONE2
14 Forced USB All Device Write Mode TUNE + - Forcibly switches this unit to USB update mode.
SOURCE
(See 62 page)
MASTER VOLUME
SOURCE SELECT
ZONE2 ON/OFF ZONE2 SOURCE TUNER TUNE BAND MODE DIMMER STATUS
PRESET CH
1 CBL/SAT 2 Blu-ray 3 GAME 4 ONLINE
QUICK SELECT
PHONES
INFO MOVIE MUSIC GAME PURE AUX 1 - HDMI SETUP MIC
SOUND MODE
X ZONE2 TUNER TUNE + STATUS

SOURCE PRESET CH +
TUNER TUNE － DIMMER
PRESET CH －
20

1. Version Display Mode
1.1. Actions
Version information is displayed when the device is started in this mode.
1.2. Starting up
Hold down buttons "DIMMER" and "STATUS" at the same time and press the power button to turn on the power.
Press the "STATUS" button after this to show the information in section 1.3 on the display.
b A version list is also displayed on GUIs while the version appears on the display.
1.3. Display Order

Error information(See "1.4. Error display") → q Model destination information → w Firmware Package Version
→ e Main µ-com → r Main 1st Boot Loader → t DSP ROM → y Audio PLD → u Video PLD → i GUI SFLASH
→ o Ethernet 1st Boot Loader, Hardware ID → Q0 Ethernet 2nd Boot Loader, Rhapsody Flag
→ Q1 Ethernet IMAGE → Q2 Ethernet MAC ADDRESS information → Q3 BT MAC Address information
q Model destination information :

FLD A V R - S 9 0 0 W E 3 *
FLD A V R - X 2 1 0 0 W E 3 *
FLD A V R - X 2 1 0 0 W E 2 *
FLD A V R - X 2 1 0 0 W E 1 *
FLD A V R - X 2 1 0 0 W E 1 C *
FLD A V R - X 2 1 0 0 W J P *
w Firmware Package Version :

FLD P a c k a g e : * * * *
e Main µ-com Version :

FLD M a i n : * * * * # # # # *
*：Main version, #：Sub version
r Main 1st Boot Loader :
FLD M a i n F B L : * * . * *
t DSP ROM :
FLD D S P : * * . * *
y Audio PLD :
FLD A u d i o P L D : * * . * *
u Video PLD
FLD V i d e o P L D : * * . * *
i GUI SFLASH :
FLD G U I : @ @ $ \ * * * *
@：Model code, $：Brand code, \：Region code, *：version
21

o Ethernet 1st Boot Loader, Hardware ID :
FLD E t h e r n e t F B L
Press the "STATUS" button.
FLD * * * * * * - b d
Q0 Ethernet 2nd Boot Loader, Rhapsody Flag :

FLD E t h e r n e t S B L
FLD B * * * * * * * * * * * * - 0 A
Q1 Ethernet IMAGE :
FLD E t h e r n e t I M G
FLD I * * * * * * * * * * * *
Q2 Ethernet MAC ADDRESS information :

FLD * N E T M A C A d d r e s s
FLD * * * * * * - * * * * * *
Q3 BT MAC ADDRESS information :

FLD * B T M A C A d d r e s s
FLD * * * * * * - * * * * * *
22

1.4. Error display
See the table below for descriptions of displayed errors and countermeasures for these.
Display order is q,w,e,r.
Condition States Display TROUBLE SHOOTING
The model name, brand name and region FIRM ERROR

information written in the firmware are
compared to the region settings in the
PCB.This error is displayed if the informa-
•Check the resistor for
tion does not match. Main :********
-
q setting region(R1428 /
Firm Check R1431, HDMIPCB).
DSP :**.**
-
NG •Write the firmware for
Audio PLD:**.** the correct region.
-
" ▲ " or " ▼ " is displayed as the first
GUI :********
-
character if the firmware is not correct (see
right section of table).
w •Check the SUB(U1020)

SUB μ -COM There is not a reply from SUBμ-COM. SUB ERROR 01 and surrounding
NG circuits.
An error occurs in Loopback Test of the •Check the circuits
DDR memory to perform at initial setting IP SCALER ERR 01 around the IP SCAL-
of i/p Scaler(ADV8003). ER (U1026, HDMI
e PCB) and DDR2
IP SCALER NG In initial setting of i/p Scaler ( ADV8003 ) , (U1028/1029).
there is not the reply of the Loopback Test IP SCALER ERR 02 If there appear to be
result of the DDR memory . no problems, U1026 or
U1028/1029 is faulty.
r When it is different from Version of the
•Check the firmware
GUI Serial Main CPU which Version of GUI Serial GUI VER. ERROR version.
Flash NG Flash supports （ADV8003）
.
•Check the DIR (U1040,
t This error is displayed if there is no re-
DIR ERROR 01 HDMI PCB) and sur-
DIR NG sponse from the DIR.
rounding circuits.
The DSP FLAG0 port does not enter "Hi"
status even after executing a DSP reset DSP ERROR 01
during a DSP code boot.
The DSP FLAG0 port does not enter "Hi"
status before issuing a DSP command.
DSP ERROR 02
ACK="Hi" does not occur during DSP data •Check the DSP (U1024,
y reading, even when WRITE="Lo".
DSP ERROR 03
HDMI PCB) and sur-
DSP NG
ACK="Lo" does not occur during DSP data rounding circuits.
reading, even when REQ="Lo".
DSP ERROR 04
ACK="Hi" does not occur during DSP data
writing, even when WRITE="Hi".
DSP ERROR 05
ACK="Lo" does not occur during DSP data
writing, even when REQ="Lo".
DSP ERROR 06
u An error occurred in a checksum of the
EEPROM NG EEPROM(*** is a block address number).
E 2 P R O M E R R * * *
23

1.5. Version Display in the Setup Menu
Follow the steps below to display the firmware information.
(1) Press the "SETUP" button on the remote control.

(2) Select "General - Information - Firmware".
The version information is displayed as a 12-digit number as shown in the screenshot below.
General/Firmware
Version
XXXX - XXXX - XXXX
GUI Image
This 12-digit number comprises part of the version number of each device and module.
These version numbers correspond to the 12-digit number as shown below.
The 2nd digit from the right for Main

The 1th digit from the right for Main
The 2nd digit from the right for Sub
The 1st digit from the right for Sub
The 1st digit from the right for DSP
The 1st digit from the right for A.PLD
Main 0 0 3 8 Info display 1 2 0 0 - 8 3 8 2 - 6 7 7 3

Sub 6 8 1 0 0 0 2 8
DSP 8 4 0 2
A.PLD 2 8 0 1
V.PLD 3 4 0 7 The 1st digit from the right for V.PLD
GUI 6 8 1 0 0 0 1 6 The 1st digit from the right for GUI
E.FBL 0 9 0 3 1 1
E.SBL B 2 0 1 4 0 1 2 8 0 6 3 2
E.IMG I 2 0 1 4 0 4 1 7 0 0 3 7 The 1st digit from the right for IMG
The 2nd digit from the right for IMG
b The firmware version numbers and this 12-digit version information are written in the Service Information.
24

2. PANEL / REMOTE LOCK Selection Mode
2.1. Actions
Turn the PANEL LOCK and REMOTE LOCK modes on and off.
2.2. Starting up
Hold down buttons "TUNER PRESET CH+" and "ZONE2 SOURCE" at the same time and press the power button to turn
on the power.
Select the mode using the button "TUNER PRESET CH+", and press the button "STATUS" to commit the selection.
2.3. Displaying and Selecting Each Mode

The information shown on the display changes each time the button "TUNER PRESET CH+" is pressed.
Press the button "STATUS" to set the currently displayed mode and restart the device.
The On/Off setting for each mode is shown by an asterisk "b".
q
FLD F P / V O L L O C K * O N
The buttons on the unit and the master volume knob cannot be operated.

w
FLD F P L O C K O N
The buttons on the unit cannot be operated.

e
FLD F P L O C K O F F
The PANEL LOCK mode is turned off.

r
FLD R C L O C K O n
The device cannot be operated by the remote control.

t
FLD R C L O C K * O F F
The REMOTE LOCK mode is turned off.

25

3. Selection Modes for Service-related Operations
3.1. Actions
Select diagnostic mode (service path check mode), protection history display mode, or 232C standby clear mode.
3.2. Starting up
AVR-X2100W
Hold down buttons "ZONE2 SOURCE", "DIMMER" and "STATUS" at the same time and press the power button to turn on
the power.
AVR-S900W
Hold down buttons "TUNER PRESET CH+", "TUNE -" and TUNE +" at the same time and press the power button to turn
on the power.
3.3. Displaying and Selecting Each Mode

The information shown on the display changes each time the button "TUNER PRESET CH+" is pressed.
Press the button "STATUS" to set the currently displayed mode and restart the device.
q
FLD 1 . S E R V I C E C H E C K
Service Path Check Mode:
The Video and Audio paths can be checked.
This function is convenient for confirming problem paths in the product and executing a path
check after repair.
w
FLD 2 . P R O T E C T I O N
The protection history can be checked.
e
FLD 3 . R S 2 3 2 C R E S E T
Switches from 232C standby mode to normal standby mode.
r
FLD 4 . O P I N F O
Operation Info for the unit can be checked.
t
FLD 5 . T U N E R F R Q S E T
Enables reception STEP of the ANALOG TUNER to be changed.
y
FLD 6 . R E M O T E I D
Function to operate only the desired AV receiver.
3.3. Canceling the mode

Press the power button to turn off the power.
26

Personal notes:
27

3.4. DIAGNOSTIC MODE (Service Path Check Mode)
3.4.1. Actions
This function is convenient for confirming problem paths in the product and executing a path check after repair.
The Video and Audio paths can be checked.
The backup data is not rewritten.
3.4.2. Starting up
AVR-X2100W
Hold down buttons "ZONE2 SOURCE", "DIMMER" and "STATUS" at the same time and press the power button to turn on the power.
AVR-S900W
Hold down buttons "TUNER PRESET CH +", "TUNE -" and "TUNE +" at the same time and press the power button to turn on the power.
Select "1. SERVICE CHECK" and press the "STATUS" button to start the diagnostic mode.
The "TUNED", "STERO" and "RDS" segments are lit in this mode.
3.4.3. Canceling diagnostic mode

Press the power button to turn off the power.
3.4.4. Selecting items

Press q button to switch between video items and audio items.
Press button w or e to select the previous or next item.
The unit Remote control unit
q w e q w e
Actions
Audio ⇔ Video PREVIOUS NEXT Audio ⇔ Video PREVIOUS NEXT
Button DIMMER QUICK SELECT 1 QUICK SELECT 2 SLEEP CURSOR LEFT CURSOR RIGHT
3.4.5. Video system confirmation items

fig. XX: See the block diagram of the fig.XXth.
Paths confirmation item Display Settings Contents of confirmation Remarks
Video Convert V02:V.CONVERT Input Source : CBL/SAT ・Check of CVBS input ⇒ IP Scaler ⇒ HDMI output.
(Analog or HDMI ⇒ HDMI) Video Convert(IP Scaler) : ON, All sources ・Check of Component input ⇒ IP Scaler ⇒ HDMI output.
IP Scaler : "Analog & HDMI", All sources ・Check of HDMI input ⇒ IP Scaler ⇒ HDMI output.
1
Resolution : "Auto", All sources ・Check of ETHERNET input ⇒ IP Scaler ⇒ HDMI output.
fig.01 MAIN ZONE ON （※ The input source can be switched to any source except CBL/SAT.）
ZONE2 OFF
HDMI pass V03:HDMI PASS Input Source : CBL/SAT ・Check of HDMI input（MAIN Function）⇒ HDMI output（MAIN）
（MAIN ZONE） Source of Video Convert(IP Scaler) : OFF, All sources （※ The input source can be switched to any source except CBL/SAT.）
2 fig.02
MAIN ZONE ON
ZONE2 OFF
HDMI CEC V04:HDMI CEC Input Source : CBL/SAT ・When the power supply of a TV is put in the standby mode, make sure that the
HDMI Control : ON power supply of this unit is also put in the standby mode.
fig.03
3 MAIN ZONE ON ・The ARC path can also be checked (check this using the TV input source).
ZONE2 OFF （※ The input source can be switched to any source except CBL/SAT.）
HDMI Audio V05:H.AUDIO-AVR Input Source : CBL/SAT ・Check of HDMI input(PCM , DolbyDigital , DTS) ⇒ Speaker output.
(Audio: AVR) fig.04a HDMI Control : OFF ・Check of HDMI input(HD audio) ⇒ Speaker output.
4
fig.04b HDMI Audio：AVR ( if checking the audio output from AVR ) （※ The input source can be switched to any source except CBL/SAT.）
HDMI Audio V06:H.AUDIO-TV HDMI Audio：TV ( if checking the audio output from TV ) ・Check of HDMI input(PCM , DolbyDigital , DTS) ⇒ HDMI output (audio output
(Audio: TV) from connected TV)
5 fig.05 （※ The input source can be switched to any source except CBL/SAT.）
GUI V07:GUI MENU ON Input Source : CBL/SAT ・Check of GUI display ⇒ HDMI output.
Video Convert(IP Scaler) : ON, All sources （※ The input source can be switched to any source except CBL/SAT.）
IP Scaler : "Analog & HDMI", All sources
6 fig.06 Resolution : "AUTO", All sources
Setup Menu ON
MAIN ZONE ON
ZONE2 OFF
28

3.4.6. Audio system confirmation items
fig. XX: See the block diagram of the fig.XXth.
Paths confirmation item Display Settings Contents of confirmation Remarks
Analog ( pass ) A01:ANALOG PASS Input Source: CBL/SAT ・Check the audio output.
Input Mode: ANALOG fixed ・Check of Analog input ⇒ Speaker output.
fig.07 Sound mode: DIRECT Front L/R
1
Amp assign: Surround Back （※ The input source can be switched to any source except CBL/SAT.）
MAIN ZONE: ON
ZONE2: OFF
DIGITAL A02:DIGITAL Input Source : CBL/SAT ・Check the audio output.
(MAIN) fig.08a Input Mode : DIGITAL fixed ・Check of Digital input ⇒ Speaker output.
Sound mode: MULTI CH STEREO Front L/R、Center、Surround L/R、Surround Back L/R
fig.08b
2 Amp assign : Surround Back ・Check of Digital(PCM) input ⇒ Preout output.
Speaker Config all Speaker=Small / SW=Yes(2ch) Front L/R、Center、Surround L/R、Surround Back L/R、Subwoofer
MAIN ZONE ON （※ The input source can be switched to any source except CBL/SAT.）
ZONE2 OFF
DIGITAL A03:DIGITAL-Z2 Input Source : NETWORK ・Check the audio output.
(ZONE2) Input Mode : Auto ・Digital(PCM) input ⇒ Speaker output
fig.09a Sound mode: STEREO Surround Back (ZONE2) L/R
3
fig.09b Amp assign : ZONE2 ・Digital(PCM) input ⇒ Preout output
MAIN ZONE: ON ZONE2 L/R
ZONE2: ON
HDMI A05:HDMI Input Source : CBL/SAT ・Check the audio output.
Input Mode : HDMI fixed ・HDMI input ⇒ Speaker output.
fig.10a Sound mode: STEREO Front L/R
4
fig.10b Amp assign : Surround Back （※ The input source can be switched to any source except CBL/SAT.）
MAIN ZONE: ON
ZONE2: OFF
Analog AD A06:AD Input Source : CBL/SAT ・Check the audio output.
(MAIN) Input Mode : Analog fixed ・Check of Analog input ⇒ Speaker output.
fig.11a Sound mode: MULTI CH STEREO Front L/R、Center、Surround L/R、Surround Back L/R
fig.11b Vol -20dB ・Check of Analog input ⇒ Pre OUT.
5
Amp assign : Surround Back Front L/R、Center、Surround L/R、Surround Back L/R、Subwoofer
Speaker Config all Speaker=Small / SW=Yes(2ch) （※ The input source can be switched to any source except CBL/SAT.）
MAIN ZONE: ON （※ Volume -20dB is the value when Relative settings are used. The value is 60
ZONE2: OFF when Absolute settings are used）
Analog Amp Assign A07:ASSIGN-Z2 Input Source : CBL/SAT ・Check the audio output.
(Amp Assign: ZONE2) Input Mode : Auto ・Check of Analog input ⇒ Speaker output.
Sound mode: STEREO Surround Back(ZONE2) L/R
fig.12 Z2 Source : Source ・Check of Analog input ⇒ Pre OUT.
6
Vol -20dB ZONE2 L/R
Amp assign : ZONE2 （※ The input source can be switched to any source except CBL/SAT.）
MAIN ZONE: ON （※ Volume -20dB is the value when Relative settings are used. The value is 60
ZONE2: ON when Absolute settings are used）
Analog Amp Assign A11:ASSIGN-BiAMP Input Source : CBL/SAT ・Check the audio output.
(Amp Assign: Bi-Amp) Input Mode : Auto ・Check of Analog input ⇒ Speaker output.
AVR-X2100W Only Sound mode: MULTI CH STEREO Surround Back L/R
7 fig.13 Amp assign : Bi-Amp （※ The input source can be switched to any source except CBL/SAT.）
MAIN ZONE ON （※ Volume -20dB is the value when Relative settings are used. The value is 60
ZONE2 OFF when Absolute settings are used）
Front Height A14:FRONT HEIGHT Input Source : CBL/SAT ・Check the audio output.
Input Mode : Auto ・Check of Analog input ⇒ Speaker output.
fig.14a Sound mode: MULTI CH STEREO Surround Back L/R
8 fig.14b Vol -20dB （※ The input source can be switched to any source except CBL/SAT.）
Amp assign : Front Height ・Check of PREOUT output.
MAIN ZONE ON （※ Volume -20dB is the value when Relative settings are used. The value is 60
ZONE2 OFF when Absolute settings are used）
29

DIAGNOSTIC PATH DIAGRAM
fig.01
ADV8195 TMDS IN
FRONT HDMI BUFFER TMDS OUTPUT
HDMI OUT1
TMDS IN
HDMI1 HDMI2.0 HDMI2.0

Matix SW Matix SW
MN8647781 MN8647781
HDMI2 MX25L12845EMI-10G 128M TMDS OUTPUT
HDMI IN HDMI OUT2
TMDS OUT
TMDS IN
HDMI3
TMDS OUT
OSD
HDMI4
HDMI Rx
HDMI5 HDMI2.0 VIDEO DECODER HDMI i/p Scaler_TX_OSD
Matix SW ADV7850 AD55-058Z-0
MN8647781 (ADV8003-8B) OUT
HDMI6
HDMI7 TMDS IN
RJ-45
RX+/- K4T51163QJ K4T51163QJ
TX+/-
24bit Data
WiFi BT ANT PCK,8bit Data(VD0~VD7) VIDEO PLD

5M80ZT100C5N 24bit Data
CX870 MODULE
VBUS
DATA- USBD-
USB FRONT DATA+ USBD+
GND
TX+/-
BT MODULE RX+/-
COMP1-Y COMP1-Y
Y
Y
COMP1-Cb
IN1 Cb COMP2-Y
COMP1-Cr
Cr COMP1-Cb
Cb
COMPONENT IN COMP2-Cb
COMP1-Cr
COMP2-Y Cr
Y COMP2-Cr
IN2 Cb
COMP2-Cb
COMP2-Cr
Cr
INPUT SELECT NJM2595
CVBS1
IN1 CVBS2
CVBS3
CVBS IN
IN2
AVR-E900 AVR-X2100 OTHER AVR
IN3 (V.AUX)
30

fig.02
ADV8195 TMDS IN
HDMI OUT1
TMDS IN

Matix SW Matix SW
MN8647781 MN8647781
HDMI IN HDMI OUT2
TMDS OUT
TMDS IN
HDMI3
TMDS OUT
OSD
HDMI4
HDMI Rx
MN8647781 (ADV8003-8B) OUT
HDMI6
HDMI7 TMDS IN
RJ-45
RX+/- K4T51163QJ K4T51163QJ
TX+/-
24bit Data

CX870 MODULE
VBUS
DATA- USBD-
GND
TX+/-
BT MODULE RX+/-
COMP1-Y COMP1-Y
Y
Y
COMP1-Cb
IN1 Cb COMP2-Y
COMP1-Cr
Cr COMP1-Cb
Cb
COMP1-Cr
COMP2-Y Cr
Y COMP2-Cr
IN2 Cb
COMP2-Cb
COMP2-Cr
Cr
CVBS1
IN1 CVBS2
CVBS3
CVBS IN
IN2
IN3 (V.AUX)
31

fig.03
ADV8195 TMDS IN
HDMI OUT1
TMDS IN

Matix SW Matix SW
MN8647781 MN8647781
HDMI IN HDMI OUT2
TMDS OUT
TMDS IN
HDMI3
TMDS OUT
OSD
HDMI4 SUB uCOM
HDMI Rx
MN8647781 (ADV8003-8B) OUT
HDMI6
HDMI7 TMDS IN
RJ-45
RX+/- K4T51163QJ K4T51163QJ
TX+/-
24bit Data

CX870 MODULE
VBUS
DATA- USBD-
GND
TX+/-
BT MODULE RX+/-
COMP1-Y COMP1-Y
Y
Y
COMP1-Cb
IN1 Cb COMP2-Y
COMP1-Cr
Cr COMP1-Cb
Cb
COMP1-Cr
COMP2-Y Cr
Y COMP2-Cr
IN2 Cb
COMP2-Cb
COMP2-Cr
Cr
CVBS1
IN1 CVBS2
CVBS3
CVBS IN
IN2
IN3 (V.AUX)
32

fig.04a TMDS
TMDS
864778_I2S0
TMDS
HDMI OUT1
864778_I2S1
864778_I2S2 HDMI2.0 HDMI OUT2
ADV8195 Matix SW
864778_I2S3
TMDS
TMDS
FRONT TMDS MN8647781
HDMI BUFFER
7(MCLK/BCLK/LRCLK 864778_MCLK
　SD0/SD1/SD2/SD3_SPDIF) TXSPDIF
864778_SCLK
TC74VHC244 864778_LRCK
HDMI1 HDMI2.0 TC74VHC244
Matix SW RXFS
MN8647781
RX64FS I2S(S0,S1,S2,S3)
HDMI2
RXMCLK MCLK
RXSPDIF SCLK
HDMI3 LRCK/DSD2B TMDS
RXI2S3
HDMI IN RXI2S2
RXI2S1 AD55/058Z-0
HDMI RECEIVER (ADV8003-8B)
RXI2S0 ADV7850 HDMI TRANSCEIVER
864778_I2S0
864778_I2S1 SPDIF
HDMI4
864778_I2S2
7(MCLK/BCLK/LRCLK 864778_I2S3
HDMI5 　SD0/SD1/SD2/SD3_SPDIF)
HDMI2.0 TC74VHC244 864778_MCLK TC74VHC244

Matix SW
HDMI6 MN8647781 864778_SCLK
864778_LRCK
HDMI7
TXSPDIF
RXSPDIF
RXMCLK
RX64FS
OPEN
RXI2S3
RXI2S2
RXI2S1
RXI2S0
RXFS
DSP1INMCK
DSP1IN64FS
RJ-45 DSP1INFS
RX+/- DSP1INF/FL SERIAL
FLASH
DSP1IN_/SW
TX+/- DSP1IN_/FR
DSP1INCSW/C
NET/USB_MCK DSP1INS/SL
WiFi ANT NET/USB_BCK DSP1INSB/SR

NET/USB_LRCK
PLDAERR
NET/USB_DATAF/FL
DATAF
NET/USB_DATA_/FR
DATAC
USB FRONT
VBUS DATAS
DATA- USBD- CX870 MODULE DATASB SDRAM
DATA+ USBD+
GND
DSP1OUTMCK
DSP1OUT64FS
DSP1OUTFS
TX+/-
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
BT MODULE RX+/-
RX256FS
RX64FS
C1 RXFS
RXI2S0
C2
256FSDIR1
64FSDIR1
O1 FSDIR1
DATADIR1
DAC_FS
DACDATAF
DACDATAC
DACDATAS
DACDATASB
DAC_64FS
DAC_256FS
MAIN ZONE DAC

O2
PCM1690
ARCSPDIF DIR_FS1
AVR_E900 & X2100 E3 : 1 / 1 DIRRXSPDIF DIR_64FS1
OTHER AVR : 2 / 2 DIR_256FS1
AVR_X2100 E2/E1C/K : 2 / 0 DM920_SPDIF
( OPT/ COAX )
TO ANALOG AUDIO BLOCK
33

fig.04b
TO DIGITAL AUDIO BLOCK
ATT
H/P-L
HEADPHONE OUT
H/P-R
FL
FL
FR
FR
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
C
C
SPK OUT
SL
SL
SR
DSP_SBR
DSP_SBL
DSP_SW
DSP_SR
DSP_FR
SR
DSP_SL
DSP_FL
DSP_C
DM920_R/L
SBL
ADINL
ADINR
SBL(FL-B/FL-H/BI-AMP/ZONE)
SBR
SBR(FR-B/FR-H/BI-AMP/ZONE)
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
INPUT OTHER AVR ONLY C
DSP_SW PREOUT
TUNER EXT_SW SW1
ALL MODEL : FM/AM AVR_E900 / X2100 : 0.2ch
OTHER AVR : 7.2ch
SW2
DSP_SL
MIC(Mini Jack) EXT_SL
SL
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
OTHER AVR ONLY
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
FR
AVR_E900 ONLY OTHER AVR ONLY ZONE2 OUT
AVR_E900 EXCEPT
C
7.1CH SW
Z2R
EXT.IN
SL
ZONE2 VOLUME CONTROL
SR
SBL
SBR
ZONE2 VOLUME
BD3812F
AVR_E900 EXCEPT
34

fig.05 TMDS
TMDS
864778_I2S0
TMDS
HDMI OUT1
864778_I2S1
ADV8195 Matix SW
864778_I2S3
TMDS
TMDS
HDMI BUFFER
864778_SCLK
Matix SW RXFS
MN8647781
HDMI2
RXMCLK MCLK
RXSPDIF SCLK
RXI2S3
HDMI IN RXI2S2
RXI2S1 AD55/058Z-0
864778_I2S0
864778_I2S1 SPDIF
HDMI4
864778_I2S2

Matix SW
HDMI6 MN8647781 864778_SCLK
864778_LRCK
HDMI7
TXSPDIF
RXSPDIF
RXMCLK
RX64FS
OPEN
RXI2S3
RXI2S2
RXI2S1
RXI2S0
RXFS
DSP1INMCK
DSP1IN64FS
RJ-45 DSP1INFS
FLASH
DSP1IN_/SW
TX+/- DSP1IN_/FR
DSP1INCSW/C

NET/USB_LRCK
PLDAERR
NET/USB_DATAF/FL
DATAF
NET/USB_DATA_/FR
DATAC
USB FRONT
VBUS DATAS
DATA+ USBD+
GND
DSP1OUTMCK
DSP1OUT64FS
DSP1OUTFS
TX+/-
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
BT MODULE RX+/-
RX256FS
RX64FS
C1 RXFS
RXI2S0
C2
256FSDIR1
64FSDIR1
O1 FSDIR1
DATADIR1
DAC_FS
DACDATAF
DACDATAC
DACDATAS
DACDATASB
DAC_64FS
DAC_256FS
MAIN ZONE DAC

O2
PCM1690
ARCSPDIF DIR_FS1
( OPT/ COAX )
35

fig.06
ADV8195 TMDS IN
HDMI OUT1
TMDS IN

Matix SW Matix SW
MN8647781 MN8647781
HDMI IN HDMI OUT2
TMDS OUT
TMDS IN
HDMI3
TMDS OUT
OSD
HDMI4
HDMI Rx
MN8647781 (ADV8003-8B) OUT
HDMI6
HDMI7 TMDS IN
RJ-45
RX+/- K4T51163QJ K4T51163QJ
TX+/-
24bit Data

CX870 MODULE
VBUS
DATA- USBD-
GND
TX+/-
BT MODULE RX+/-
COMP1-Y COMP1-Y
Y
Y
COMP1-Cb
IN1 Cb COMP2-Y
COMP1-Cr
Cr COMP1-Cb
Cb
COMP1-Cr
COMP2-Y Cr
Y COMP2-Cr
IN2 Cb
COMP2-Cb
COMP2-Cr
Cr
CVBS1
IN1 CVBS2
CVBS3
CVBS IN
IN2
IN3 (V.AUX)
36

fig.07
ATT
H/P-L
HEADPHONE OUT
H/P-R
FL
FL
FR
FR
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
C
C
SPK OUT
SL
SL
SR
DSP_SBR
DSP_SBL
DSP_SW
DSP_SR
DSP_FR
SR
DSP_SL
DSP_FL
DSP_C
DM920_R/L
SBL
ADINL
ADINR
SBR
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
DSP_SW PREOUT
TUNER EXT_SW SW1
OTHER AVR : 7.2ch
SW2
DSP_SL
SL
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
OTHER AVR ONLY
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
FR
AVR_E900 EXCEPT
C
7.1CH SW
Z2R
EXT.IN
SL
SR
SBL
SBR
ZONE2 VOLUME
BD3812F
AVR_E900 EXCEPT
37

fig.08a TMDS
TMDS
864778_I2S0
TMDS
HDMI OUT1
864778_I2S1
ADV8195 Matix SW
864778_I2S3
TMDS
TMDS
HDMI BUFFER
864778_SCLK
Matix SW RXFS
MN8647781
HDMI2
RXMCLK MCLK
RXSPDIF SCLK
RXI2S3
HDMI IN RXI2S2
RXI2S1 AD55/058Z-0
864778_I2S0
864778_I2S1 SPDIF
HDMI4
864778_I2S2

Matix SW
HDMI6 MN8647781 864778_SCLK
864778_LRCK
HDMI7
TXSPDIF
RXSPDIF
RXMCLK
RX64FS
OPEN
RXI2S3
RXI2S2
RXI2S1
RXI2S0
RXFS
DSP1INMCK
DSP1IN64FS
RJ-45 DSP1INFS
FLASH
DSP1IN_/SW
TX+/- DSP1IN_/FR
DSP1INCSW/C

NET/USB_LRCK
PLDAERR
NET/USB_DATAF/FL
DATAF
NET/USB_DATA_/FR
DATAC
USB FRONT
VBUS DATAS
DATA+ USBD+
GND
DSP1OUTMCK
DSP1OUT64FS
DSP1OUTFS
TX+/-
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
BT MODULE RX+/-
RX256FS
RX64FS
C1 RXFS
RXI2S0
C2
256FSDIR1
64FSDIR1
O1 FSDIR1
DATADIR1
DAC_FS
DACDATAF
DACDATAC
DACDATAS
DACDATASB
DAC_64FS
DAC_256FS
MAIN ZONE DAC

O2
PCM1690
ARCSPDIF DIR_FS1
( OPT/ COAX )
38

fig.08b
ATT
H/P-L
HEADPHONE OUT
H/P-R
FL
FL
FR
FR
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
C
C
SPK OUT
SL
SL
SR
DSP_SBR
DSP_SBL
DSP_SW
DSP_SR
DSP_FR
SR
DSP_SL
DSP_FL
DSP_C
DM920_R/L
SBL
ADINL
ADINR
SBR
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
DSP_SW PREOUT
TUNER EXT_SW SW1
OTHER AVR : 7.2ch
SW2
DSP_SL
SL
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
OTHER AVR ONLY
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
FR
AVR_E900 EXCEPT
C
7.1CH SW
Z2R
EXT.IN
SL
SR
SBL
SBR
ZONE2 VOLUME
BD3812F
AVR_E900 EXCEPT
39

fig.09a TMDS
TMDS
864778_I2S0
TMDS
HDMI OUT1
864778_I2S1
ADV8195 Matix SW
864778_I2S3
TMDS
TMDS
HDMI BUFFER
864778_SCLK
Matix SW RXFS
MN8647781
HDMI2
RXMCLK MCLK
RXSPDIF SCLK
RXI2S3
HDMI IN RXI2S2
RXI2S1 AD55/058Z-0
864778_I2S0
864778_I2S1 SPDIF
HDMI4
864778_I2S2

Matix SW
HDMI6 MN8647781 864778_SCLK
864778_LRCK
HDMI7
TXSPDIF
RXSPDIF
RXMCLK
RX64FS
OPEN
RXI2S3
RXI2S2
RXI2S1
RXI2S0
RXFS
DSP1INMCK
DSP1IN64FS
RJ-45 DSP1INFS
FLASH
DSP1IN_/SW
TX+/- DSP1IN_/FR
DSP1INCSW/C

NET/USB_LRCK
PLDAERR
NET/USB_DATAF/FL
DATAF
NET/USB_DATA_/FR
DATAC
USB FRONT
VBUS DATAS
DATA+ USBD+
GND
DSP1OUTMCK
DSP1OUT64FS
DSP1OUTFS
TX+/-
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
BT MODULE RX+/-
RX256FS
RX64FS
C1 RXFS
RXI2S0
C2
256FSDIR1
64FSDIR1
O1 FSDIR1
DATADIR1
DAC_FS
DACDATAF
DACDATAC
DACDATAS
DACDATASB
DAC_64FS
DAC_256FS
MAIN ZONE DAC

O2
PCM1690
ARCSPDIF DIR_FS1
( OPT/ COAX )
40

fig.09b
ATT
H/P-L
HEADPHONE OUT
H/P-R
FL
FL
FR
FR
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
C
C
SPK OUT
SL
SL
SR
DSP_SBR
DSP_SBL
DSP_SW
DSP_SR
DSP_FR
SR
DSP_SL
DSP_FL
DSP_C
DM920_R/L
SBL
ADINL
ADINR
SBR
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
DSP_SW PREOUT
TUNER EXT_SW SW1
OTHER AVR : 7.2ch
SW2
DSP_SL
SL
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
OTHER AVR ONLY
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
FR
AVR_E900 EXCEPT
C
7.1CH SW
Z2R
EXT.IN
SL
SR
SBL
SBR
ZONE2 VOLUME
BD3812F
AVR_E900 EXCEPT
41

fig.10a TMDS
TMDS
864778_I2S0
TMDS
HDMI OUT1
864778_I2S1
ADV8195 Matix SW
864778_I2S3
TMDS
TMDS
HDMI BUFFER
864778_SCLK
Matix SW RXFS
MN8647781
HDMI2
RXMCLK MCLK
RXSPDIF SCLK
RXI2S3
HDMI IN RXI2S2
RXI2S1 AD55/058Z-0
864778_I2S0
864778_I2S1 SPDIF
HDMI4
864778_I2S2

Matix SW
HDMI6 MN8647781 864778_SCLK
864778_LRCK
HDMI7
TXSPDIF
RXSPDIF
RXMCLK
RX64FS
OPEN
RXI2S3
RXI2S2
RXI2S1
RXI2S0
RXFS
DSP1INMCK
DSP1IN64FS
RJ-45 DSP1INFS
FLASH
DSP1IN_/SW
TX+/- DSP1IN_/FR
DSP1INCSW/C

NET/USB_LRCK
PLDAERR
NET/USB_DATAF/FL
DATAF
NET/USB_DATA_/FR
DATAC
USB FRONT
VBUS DATAS
DATA+ USBD+
GND
DSP1OUTMCK
DSP1OUT64FS
DSP1OUTFS
TX+/-
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
BT MODULE RX+/-
RX256FS
RX64FS
C1 RXFS
RXI2S0
C2
256FSDIR1
64FSDIR1
O1 FSDIR1
DATADIR1
DAC_FS
DACDATAF
DACDATAC
DACDATAS
DACDATASB
DAC_64FS
DAC_256FS
MAIN ZONE DAC

O2
PCM1690
ARCSPDIF DIR_FS1
( OPT/ COAX )
42

fig.10b
ATT
H/P-L
HEADPHONE OUT
H/P-R
FL
FL
FR
FR
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
C
C
SPK OUT
SL
SL
SR
DSP_SBR
DSP_SBL
DSP_SW
DSP_SR
DSP_FR
SR
DSP_SL
DSP_FL
DSP_C
DM920_R/L
SBL
ADINL
ADINR
SBR
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
DSP_SW PREOUT
TUNER EXT_SW SW1
OTHER AVR : 7.2ch
SW2
DSP_SL
SL
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
OTHER AVR ONLY
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
FR
AVR_E900 EXCEPT
C
7.1CH SW
Z2R
EXT.IN
SL
SR
SBL
SBR
ZONE2 VOLUME
BD3812F
AVR_E900 EXCEPT
43

fig.11a TMDS
TMDS
864778_I2S0
TMDS
HDMI OUT1
864778_I2S1
ADV8195 Matix SW
864778_I2S3
TMDS
TMDS
HDMI BUFFER
864778_SCLK
Matix SW RXFS
MN8647781
HDMI2
RXMCLK MCLK
RXSPDIF SCLK
RXI2S3
HDMI IN RXI2S2
RXI2S1 AD55/058Z-0
864778_I2S0
864778_I2S1 SPDIF
HDMI4
864778_I2S2

Matix SW
HDMI6 MN8647781 864778_SCLK
864778_LRCK
HDMI7
TXSPDIF
RXSPDIF
RXMCLK
RX64FS
OPEN
RXI2S3
RXI2S2
RXI2S1
RXI2S0
RXFS
DSP1INMCK
DSP1IN64FS
RJ-45 DSP1INFS
FLASH
DSP1IN_/SW
TX+/- DSP1IN_/FR
DSP1INCSW/C

NET/USB_LRCK
PLDAERR
NET/USB_DATAF/FL
DATAF
NET/USB_DATA_/FR
DATAC
USB FRONT
VBUS DATAS
DATA+ USBD+
GND
DSP1OUTMCK
DSP1OUT64FS
DSP1OUTFS
TX+/-
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
BT MODULE RX+/-
RX256FS
RX64FS
C1 RXFS
RXI2S0
C2
256FSDIR1
64FSDIR1
O1 FSDIR1
DATADIR1
DAC_FS
DACDATAF
DACDATAC
DACDATAS
DACDATASB
DAC_64FS
DAC_256FS
MAIN ZONE DAC

O2
PCM1690
ARCSPDIF DIR_FS1
( OPT/ COAX )
44

fig.11b
ATT
H/P-L
HEADPHONE OUT
H/P-R
FL
FL
FR
FR
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
C
C
SPK OUT
SL
SL
SR
DSP_SBR
DSP_SBL
DSP_SW
DSP_SR
DSP_FR
SR
DSP_SL
DSP_FL
DSP_C
DM920_R/L
SBL
ADINL
ADINR
SBR
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
DSP_SW PREOUT
TUNER EXT_SW SW1
OTHER AVR : 7.2ch
SW2
DSP_SL
SL
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
OTHER AVR ONLY
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
FR
AVR_E900 EXCEPT
C
7.1CH SW
Z2R
EXT.IN
SL
SR
SBL
SBR
ZONE2 VOLUME
BD3812F
AVR_E900 EXCEPT
45

fig.12
ATT
H/P-L
HEADPHONE OUT
H/P-R
FL
FL
FR
FR
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
C
C
SPK OUT
SL
SL
SR
DSP_SBR
DSP_SBL
DSP_SW
DSP_SR
DSP_FR
SR
DSP_SL
DSP_FL
DSP_C
DM920_R/L
SBL
ADINL
ADINR
SBR
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
DSP_SW PREOUT
TUNER EXT_SW SW1
OTHER AVR : 7.2ch
SW2
DSP_SL
SL
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
OTHER AVR ONLY
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
FR
AVR_E900 EXCEPT
C
7.1CH SW
Z2R
EXT.IN
SL
SR
SBL
SBR
ZONE2 VOLUME
BD3812F
AVR_E900 EXCEPT
46

fig.13
ATT
H/P-L
HEADPHONE OUT
H/P-R
FL
FL
FR
FR
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
C
C
SPK OUT
SL
SL
SR
DSP_SBR
DSP_SBL
DSP_SW
DSP_SR
DSP_FR
SR
DSP_SL
DSP_FL
DSP_C
DM920_R/L
SBL
ADINL
ADINR
SBR
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
DSP_SW PREOUT
TUNER EXT_SW SW1
OTHER AVR : 7.2ch
SW2
DSP_SL
SL
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
OTHER AVR ONLY
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
FR
AVR_E900 EXCEPT
C
7.1CH SW
Z2R
EXT.IN
SL
SR
SBL
SBR
ZONE2 VOLUME
BD3812F
AVR_E900 EXCEPT
47

fig.14a TMDS
TMDS
864778_I2S0
TMDS
HDMI OUT1
864778_I2S1
ADV8195 Matix SW
864778_I2S3
TMDS
TMDS
HDMI BUFFER
864778_SCLK
Matix SW RXFS
MN8647781
HDMI2
RXMCLK MCLK
RXSPDIF SCLK
RXI2S3
HDMI IN RXI2S2
RXI2S1 AD55/058Z-0
864778_I2S0
864778_I2S1 SPDIF
HDMI4
864778_I2S2

Matix SW
HDMI6 MN8647781 864778_SCLK
864778_LRCK
HDMI7
TXSPDIF
RXSPDIF
RXMCLK
RX64FS
OPEN
RXI2S3
RXI2S2
RXI2S1
RXI2S0
RXFS
DSP1INMCK
DSP1IN64FS
RJ-45 DSP1INFS
FLASH
DSP1IN_/SW
TX+/- DSP1IN_/FR
DSP1INCSW/C

NET/USB_LRCK
PLDAERR
NET/USB_DATAF/FL
DATAF
NET/USB_DATA_/FR
DATAC
USB FRONT
VBUS DATAS
DATA+ USBD+
GND
DSP1OUTMCK
DSP1OUT64FS
DSP1OUTFS
TX+/-
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
BT MODULE RX+/-
RX256FS
RX64FS
C1 RXFS
RXI2S0
C2
256FSDIR1
64FSDIR1
O1 FSDIR1
DATADIR1
DAC_FS
DACDATAF
DACDATAC
DACDATAS
DACDATASB
DAC_64FS
DAC_256FS
MAIN ZONE DAC

O2
PCM1690
ARCSPDIF DIR_FS1
( OPT/ COAX )
48

fig.14b
ATT
H/P-L
HEADPHONE OUT
H/P-R
FL
FL
FR
FR
Z2_DAC_LRCK
Z2_DAC_DATA
Z2_DAC_BCLK
Z2_DAC_MCLK
C
C
SPK OUT
SL
SL
SR
DSP_SBR
DSP_SBL
DSP_SW
DSP_SR
DSP_FR
SR
DSP_SL
DSP_FL
DSP_C
DM920_R/L
SBL
ADINL
ADINR
SBR
ANA_FL Bypass
DSP_FL Tone
EXT_FL Tone+Mix
DVD
FL
ANALOG SAT_CBL
ANA_FR
DSP_FR
Tone+Mix
Tone
INPUT EXT_FR Bypass
DVR/VCR
FR
CD
DSP_C
EXT_C
FRONT V.AUX
DSP_SW PREOUT
TUNER EXT_SW SW1
OTHER AVR : 7.2ch
SW2
DSP_SL
SL
DSP_SR
EXT_SR
SR
DSP_SBL
EXT_SBL
ZONE_L SBL
SBR
DSP_SBR
EXT_SBR
ZONE_R
OTHER AVR ONLY
ZONE2->SB ASSIGN
Z2L
FL
HDAM &Current FB
FR
AVR_E900 EXCEPT
C
7.1CH SW
Z2R
EXT.IN
SL
SR
SBL
SBR
ZONE2 VOLUME
BD3812F
AVR_E900 EXCEPT
49

3.5. Protection History Display Mode
3.5.1. Actions
This mode records and displays an event in which the THERMAL, ASO or DC protection was activated.
If protections have been activated multiple times, the latest protection operation is recorded.
3.5.2. Starting up
AVR-X2100W
·Hold down buttons "ZONE2 SOURCE", "DIMMER" and "STATUS" at the same time and press the power button to turn on
the power.
AVR-S900W
·Hold down buttons "TUNER PRESET CH+", "TUNE -" and "PRESET +" at the same time and press the power button to
turn on the power.
Select the "2. PROTECTION" using the button "TUNER PRESET CH+ / -", and press the button "STATUS" to commit the
selection.
3.5.3. Protection information and displays

·Press the "STATUS" button in Protection History Display Mode.
·The protection history can be checked.
(1) If no protections have occurred.

FLD N O P R O T E C T
(2) ASO / DC (if the last protection was ASO / DC)

FLD P R T : A S O / D C
Cause: A short circuit occurred between the speaker terminals, or speakers with an impedance outside the rating were
connected.
Abnormal DC output from the power amp.
Note: Short circuits in speaker terminals or speakers can be identified.
If the power is turned on during this abnormality, protection is activated after around 6 seconds and the power is turned off.
(4) THERMAL (if the last protection was THERMAL(A) or THERMAL(B) or THERMAL(E))
FLD P R T : T H E R M A L A
FLD P R T : T H E R M A L B
FLD P R T : T H E R M A L E
Cause: Abnormal heat sink temperature.
If the power is turned on during this abnormality, protection is activated after around 2 minutes and the power is turned off.
(4) Case of CURRENT (when the last protection incident was CURRENT protection)
FLD : C U R R E N T
Caution： These protections may also be activated due to causes such as disconnection of connectors or operations
around the microcomputer.
After viewing the above protection history, press the button "STATUS" to return to the normal display.
50

3.5.4. Clearing the Protection History
There are two ways to clear the protection history.
(1) Start Protection History Display Mode. Press the button "STATUS" to display the protection history. Press and hold the
button "DIMMER" for 3 seconds.
FLD P R T : D C
Press and hold the button "DIMMER" for 3 seconds.
FLD P R T : C L E A R
The above is displayed and the protection history is cleared.
FLD N O P R O T E C T
(2) Initialize this unit. ( "See "Initializing This Unit"11 page )
b Use the method in 3.5.3.(1) if you do not want to erase your settings from this unit.
Warning Displays by POWER LED

If the power is turned off while a protection is detected, the POWER LED (red) flashes in the following ways as a warning
according to the protection status.
(1) ASO/DC protection: Flashes in 0.5-second cycles (0.25 seconds lit, 0.25 seconds unlit)
(2) THERMAL (A/B) protection: Flashes in 2-second cycles (1 second lit, 1 second unlit)
3.6. 232C Standby Clear Mode (AVR-X2100E3 only)

3.6.1. Actions
232C Standby Clear Mode :

Switches from 232C standby mode to normal standby mode.
Starting up
Press the "STATUS" button during the following display to switch to normal standby mode.
FLD 3 . R S 2 3 2 C R E S E T
51

3.6. Operation Info Mode
3.6.1. Actions
This mode displays the accumulated operating time, power on count and each protection count.
3.6.2. Starting up
AVR-X2100W
the power.
AVR-S900W
turn on the power.
Select the "4. OP INFO" using the button "TUNER PRESET CH+ / -", and press the button "STATUS" to commit the
selection.
3.6.3. Operations
Press the "STATUS" button after starting this device in Operation Info mode.
The following information is displayed in the following order.
(a) Accumulated operating time

FLD O P T i m e H
↑Time display
"STATUS"
(b) Power on count

FLD P . O n T i m e
↑Count display
"STATUS"
(c) DC / ASO Protection count

FLD D C : / A S O :
"STATUS"
(d) Thermal Protection count

FLD T H M A : / B :
"STATUS"
(e) Thermal Protection count

FLD C u r r e n t :
"STATUS"
(Returns to normal display)
52

3.7. TUNER STEP mode (AVR-X2100WE2/E3 only)
3.3.1. Actions
This is a special mode for enabling reception STEP of the ANALOG TUNER to be changed.
3.7.2. Starting up
AVR-X2100W
the power.
AVR-S900W
turn on the power.
Select the "5. TUNER FRQ SER" using the button "TUNER PRESET CH+ / -", and press the button "STATUS" to commit
the selection.
3.7.3. Displays
Start this unit in TUNER STEP mode, select using button "TUNER PRESET CH+/-" and enter using button "STATUS".
The following information is displayed in the following order.
(a) AM9kHz/FM50kHz selected

FLD < A M 9 / F M 5 0 >

"TUNER PRESET CH+" "TUNER PRESET CH-"
(b) AM10KHz/FM200kHz selected

FLD < A M 1 0 / F M 2 0 0 >

"STATUS"
(C) Press the power button to turn off the power.

(D) Press the power button to turn on the power.
53

4. Remote ID Setup Mode
4.1. Actions
This function allows only the desired AV receiver to be operated if multiple DENON AV receivers are used in the same
room.
4.2. Starting up
AVR-X2100W
the power.
AVR-S900W
·Hold down buttons "TUNER PRESET CH+", "TUNE -" and "TUNE +" at the same time and press the power button to turn
on the power.
Select the "6. REMOTE ID" using the button "TUNER PRESET CH+ / -", and press the button "STATUS" to commit the
selection.
4.3. Operations
(1) When Remote ID Setup mode is started, the following is displayed.
FLD R E M O T E I D ?
(2) Press the "QUICK SELECT 1 - 4" button that corresponds to the number you want to set.
Button Display
QUICK SELECT 1 R E M O T E I D 1
(3) Press the power button to turn off the power.

(4) Press the power button to turn on the power.
b Only "QUICK SELECT 1 - 4" and the POWER button on the unit can be used in Remote ID Setup Mode.
s
4.4. Setting the Remote coutrol unit s

(1) Press and hold "DEVICE MENU" button for at least 3 seconds "DEV.", "TU" and "AVR" indicators flash time.
(2) P
ress the "MAIN" button.
The "DEV.", "TU" and "AVR" indicators flash twice.
(3) P
ress the "1", "2", "3" or "4" button.
The "DEV.", "TU" and "AVR" indicators flash twice.
NOTE:
If the ID of the unit and remote control do not match, "AVAMPz" appears on the display of the unit when the remote
control is used (*: own remote control ID).
54

5. Protection Pass Mode
5.1. Actions
• This mode allows the power to be turned on without activating protections.
• This is the same as normal power-on, except that protections are not activated.
5.2. Operations
AVR-X2100W
· Hold down buttons "TUNER PRESET CH +", "ZONE2 SOURCE" and "STATUS" at the same time and press the power
button to turn on the power.
AVR-S900W
· Hold down buttons "ZONE2 SOURCE", "TUNER PRESET CH +" and "TUNE +" at the same time and press the power
button to turn on the power.
The device returns to the normal display after the following is displayed.
FLD P r o t e c t i o n P a s s
This is displayed for 5 seconds before returning to the normal display.
6. CX870 / CY920 Reboot mode

6.1. Actions
• The CX870 / CY920 is restarted after CX870 / CY920 hangup.
• The CX870 / CY920 can be restarted even in the network standby setting ("Setup menu" – "Network" – "Network" –
"Always On").
6.2. Operations
1. Turn on the button "MAIN ZONE" and set NETWORK as the input source.
2. Hold down buttons "TUNER PRESET CH +" and "TUNER PRESET CH -" for at least 3 seconds while the power is on.
3. FL display during CX870 / CY920 reboot
FLD N e t w o r k R e s t a r t
4. Returns to the normal display.

NOTE:
• The CX870 / CY920 Reboot operation is not accepted again for one minute after executing the reboot.
• Reception is prohibited during update, save and load.
55

7. CX870 / CY920 Initialization mode
7.1. Actions
The following items are initialized.
(1) Favorites
(2) Quick Select
(3) Presets
(4) Internet Radio Recently Played
(5) Flickr contacts
(6) User ID
(7) Resume Playback station
7.2. Operations
AVR-X2100W
·Hold down buttons "ZONE2 SOURCE" and "DIMMER" for at least 3 seconds while the power is on.
AVR-S900W
·Hold down buttons "TUNER PRESET CH +" and "TUNE -" for at least 3 seconds while the power is on.
Initializing Display
FLD I n i t i a l i z i n g
FLD I n i t i a l i z i n g .
FLD I n i t i a l i z i n g . .
FLD I n i t i a l i z i n g . . .
Complete Display
FLD C o m p l e t e d
This is displayed for 5 seconds before returning to the normal display.
Failed Display
FLD F a i l e d
56

JIG FOR SERVICING
The following jigs (extension cable kit) are used when repairing the PCBs.
Order the jigs from your dealer if necessary.
CAUTION : Incorrect connections may cause malfunction.
• Connection of Jig for HDMI PCB

-Items to Be Prepared-
Insulation sheet (Not supplied) : 2 sheet
Ground lead (Not supplied) : 2 pc
-Procedures-
(2) Remove the connector PCB.
Front side
N1018 N1033
N1014
N1015
N1013
N1016
57

Front side
CN5004 CN5001 CN5000
CN5003
(3) Remove the HDMI PCB from the chassis and turn it over.
Place an insulation sheet larger than the PCB underneath the HDMI PCB.
b Connect the earth of the PCB to the chassis using an earth wire, etc.
PCB HDMI PCB VIDEO
Insulation sheet
CHASSIS-HDMI CONNECTOR CHASSIS-COMPOSIT CONNECTOR
58

(4) Connect the expansion cables.
PCB HDMI
1 2
PCB FRONT CNT
PCB HDMI
3
4
5 6
PCB INPUT
PCB VIDEO
7 8 9
PCB FRONT CNT
PCB VIDEO
10
PCB INPUT
Connection table of Board to Board

No. Pin Ref. No. PCB Ref. No. PCB
q 17pin CP3404 FRONT CNT N1018 HDMI

w 11pin CP3401 FRONT CNT N1033 HDMI
e 23pin CP4200 INPUT N1016 HDMI
r 7pin CP4203 INPUT N1013 HDMI
t 15pin CP4205 INPUT N1015 HDMI
y 23pin CP4201 INPUT CN1014 HDMI
u 7pin CP5004 FRONT CNT CN5004 VIDEO
i 13pin CP5001 FRONT CNT CN5001 VIDEO
o 11pin CP5000 FRONT CNT CN5000 VIDEO
Q0 17pin CP4204 INPUT CN5003 VIDEO
59

PROCEDURE AFTER REPLACING THE MICROPROCESSOR, ETC.
The procedure after replacing the u-COM (microprocessor), flash ROM, etc. is as follows.
Proce-
dure after
PCB Name Ref. No. Description Remark
Replace-
ment
HDMI U1018 R5F56108VNFP 32BIT B SOFTWARE: Main
HDMI U1020 R5F5210ABDFP B SOFTWARE: Sub
HDMI U1025 MX25L1606EM2I-12G 16M B SOFTWARE: DSP ROM
HDMI U1027 MX25L12835FMI-10G 128M B SOFTWARE: GUI ROM
HDMI U1041 5M80ZT100C5N TQFP100 B SOFTWARE: AUDIO PLD
HDMI U1045 5M80ZT100C5N TQFP100 B SOFTWARE: VIDEO PLD
Procedure after Replacement
A : The software has been written. The software is not written at the time of replacement.
B : The software has been written. The software may need to be rewritten by version updates. Check the version.
C : The software has not been written. The software needs to be written after replacement.
See "Firmware Update Procedure" for information on writing the software.
D : The software has been written. Be sure to rewrite with the latest software for your service region.
See "Firmware Update Procedure" for information on writing the software.
FIRMWARE UPDATE PROCEDURE

1. Updating by USB
The latest firmware can be downloaded to a USB memory for updates.
1.1. Connecting to the USB Memory
(1) Preparation
• USB format: Prepare a USB memory formatted in FAT16 or FAT32.
• Do not run the USB memory through a hub.
• Do not connect a computer to the USB port of this unit using a USB cable.
• Do not use an extension cable when connecting the USB unit.
1.2. Unzip Download File

Unzip the downloaded file on your computer.
AVR-XXXXXXX USB_AVR-XXXXXXX_XXXXXXXXXXXX-XXXX.zip
copy to USB flash drive
You can find "firmwares" folder after unzipped.

Copy that folder to USB flash drive.
You have to put "firmwares" folder on root directly on USB flash drive(memory).
60

1.3. File structure on USB Memory
Copy the update files to the USB memory with the following structure:
USB memory root
Model Name Model Area Product ID
AVR-X2100WE3 North America (E3) 000100680100

AVR-X2100WE2/E1 Europe (E2) / Asia (E1) 000100680200
AVR-X2100WE1C China (E1C) 000100680500
AVR-X2100WK Japan (JP) 000100680400
AVR-S900WE3 North America (E3) 000100680700
+ firmwares
+ 000100XXXXXX
+ APLD.bin
+ DSP.bin
+ enc_update.xml
+ GUI.bin
+ IMG.bcd
+ MAIN.bin
+ SBL.bcd
+ SUB.bin
+ VPLD.bin
1.4. Insert the USB memory in the USB port.

NOTE：Remove the LAN cable from this unit when performing updates.
Download firmware in MASTER VOLUME
USB flash drive.
ZONE2 MEDIA
SOURCE
QUICK SELECT
AUX 1 - HDMI SETUP MIC
61

1.5. Start the update.
AVR-X2100W
·Hold down buttons "TUNER PRESET CH +" and "STATUS" at the same time and press the power button to turn on the
power.
AVR-S900W
·Hold down buttons "ZONE2 SOURCE" and "TUNE +" at the same time and press the power button to turn on the power.
1.6. Display during USB update

The following message appears on the display after around 30 seconds
Display
FLD U S B U p d a t e S t a r t
1.7. Press the "ENTER" key on the remote control unit or this unit.
Then start Firmware Update.

Display
FLD U p d a t e F i l e C h e c k
1.8. The firmware update finishes.

The following message appears on the display:
Display
FLD U p d a t e C o m p l e t e
--- Precautions for Updates ---

• Never remove the USB memory before the update is finished.
• Never turn off the power before an update is completed.
• It takes around 1 hour to complete the update.
Once an update is started, normal operations cannot be performed until it is completed.
The GUI menu settings and image adjustment settings of this unit may be initialized.
Take note of your settings beforehand and reconfigure them after the update.
1.9 Forced USB All Device Write Mode

1.9.1. Actions
Mode used when this unit cannot be recovered.
Forcibly switches this unit to USB update mode.
1.9.2. Operations
AVR-X2100W
Press the "TUNER PRESET CH +" and "STATUS" buttons simultaneously while inserting the AC plug to turn the power
on.
AVR-S900W
Press the "ZONE2 SOURCE" and "TUNE +" buttons simultaneously while inserting the AC plug to turn the power on.
1.9.2. The firmware update finishes.

The update after the restart, all devices will be updated.
62

1.10. About the error code
See the table below for error codes and details of faults when the firmware is updated through USB memory.
Error
Details of Error code Display Coping strategies
Code
Disconnect and connect the USB

01 Unable to detect USB. ConnectionFail01 memory.
Make sure that the FirmwareFile is in

02 No FirmwareFile in USB. FilesNotFound 02 the USB memory.
FirmwareFile in USB for unsup- Check the supported Model name/area

03 NotMatchFirm 03
ported Model name/area. for the FirmwareFile.
Failed to obtain individual Firm-

04 ConnectionFail06 Start the USB Update again.
ware information.
TimeOut while obtaining individual

Firmware information.
Failed to obtain entire Firmware

information.
TimeOut while obtaining entire

Firmware information.
This unit automatically retries several

times. Wait until the FL display stops.
Error notification received while
08 ConnectionFail08 If the FL display stops at the Error dis-
requesting FirmwareInfo.
play, press and hold the "Power opera-
tion" button for five seconds.
TimeOut while obtaining Firmware
information.
Unable to detect USB for Firm- Disconnect and connect the USB
0A ConnectionFail0A
wareDownload. memory.
No FirmwareFile for Firmware- Disconnect and connect the USB

0B FilesNotFound 0B
Download. memory.

Received value with invalid
0D ConnectionFail0D If the FL display stops at the Error dis-
PackageVersion.
No UpdatePacket received from
10 Updating fail 10 If the FL display stops at the Error dis-
CX870 (TimeOut).
Abnormal data in UpdatePacket times. Wait until the FL display stops.
11 received from CX870 (FormatEr- Updating fail 11 If the FL display stops at the Error dis-
ror). play, press and hold the "Power opera-
12 received from CX870 (CheckSum- Updating fail 12 If the FL display stops at the Error dis-
Error). play, press and hold the "Power opera-
63

Error
Code
BlockErase failed before rewriting
13 Erase fail 13 If the FL display stops at the Error dis-
Main.
BlockWrite failed while rewriting
Main.
Error in Verify after rewriting Main
15 UpdateCheckNG 15 If the FL display stops at the Error dis-
(CheckSumError).
Unable to detect USB after Disconnect and connect the USB

20 ConnectionFail20
SBLMode. memory.
No FirmwareFile in USB after Disconnect and connect the USB

21 FilesNotFound 21
SBLMode. memory.
FirmwareFile in USB after

Check the supported Model name/area
22 SBLMode for unsupported Model NotMatchFirm 22 for the FirmwareFile.
name/area.
Failed to obtain entire Firmware Disconnect and connect the USB

23 ConnectionFail23
information after SBLMode. memory.

TimeOut while obtaining en- times. Wait until the FL display stops.
24 tire Firmware information after ConnectionFail24 If the FL display stops at the Error dis-
SBLMode. play, press and hold the "Power opera-
25 Failed to transit to SBLMode. ConnectionFail25 If the FL display stops at the Error dis-
TimeOut in Download (writing to
26 Download fail 26 If the FL display stops at the Error dis-
SDRAM) for FirmwareDownload.
Failed to write to EEPROM after
SBLMode.
36 Unable to detect USB. ConnectionFail36 If the FL display stops at the Error dis-
37 No FirmwareFile in USB. FilesNotFound 37 If the FL display stops at the Error dis-
FirmwareFile in USB for unsup-
38 NotMatchFirm 38 If the FL display stops at the Error dis-
ported Model name/area.
64

Error
Code
39 TimeOut in USBCheck. ConnectionFail39 If the FL display stops at the Error dis-
Unable to detect USB for Firm-
3A ConnectionFail3A If the FL display stops at the Error dis-
wareDownload.
No FirmwareFile for Firmware-
3B FilesNotFound 3B If the FL display stops at the Error dis-
Download.
3F Failed to transit to SBLMode. ConnectionFail3F If the FL display stops at the Error dis-
50 Unable to detect USB. ConnectionFail50 If the FL display stops at the Error dis-
51 No FirmwareFile in USB. FilesNotFound 51 If the FL display stops at the Error dis-
52 NotMatchFirm 52 If the FL display stops at the Error dis-
information.
wareDownload.
57 FilesNotFound 57 If the FL display stops at the Error dis-
Download.
Invalid DeviceID in response or no times. Wait until the FL display stops.
5A response from Sub for C com- ConnectionFail5A If the FL display stops at the Error dis-
mand. play, press and hold the "Power opera-
NACK received in response or no times. Wait until the FL display stops.
5B response from Sub for L com- Updating fail 5B If the FL display stops at the Error dis-
5C Updating fail 5C If the FL display stops at the Error dis-
CX870 (TimeOut).
65

Error
Code
5D received from CX870 (FormatEr- Updating fail 5D If the FL display stops at the Error dis-
5E received from CX870 (CheckSum- Updating fail 5E If the FL display stops at the Error dis-
5F received from CX870 (Data- Updating fail 5F If the FL display stops at the Error dis-
Length/DataNo). play, press and hold the "Power opera-
NACK received in response or no times. Wait until the FL display stops.
60 response from Sub for P com- Updating fail 60 If the FL display stops at the Error dis-
Mismatched CheckSum in re- times. Wait until the FL display stops.
61 sponse or no response from Sub UpdateCheckNG 61 If the FL display stops at the Error dis-
for I command. play, press and hold the "Power opera-
Failed to start up Sub in PowerOn
sequence during Update.
Failed to transit to Application-
Mode.
Failed to transit to BootLoader-
Mode.
WriteEnableLatchBit not set in times. Wait until the FL display stops.
80 Read after issuing WREN com- Updating fail 80 If the FL display stops at the Error dis-
BlockErase failed in Read after
issuing BE command.
CX870 (TimeOut).
83 received from CX870 (FormatEr- Updating fail 83 If the FL display stops at the Error dis-
84 received from CX870 (CheckSum- Updating fail 84 If the FL display stops at the Error dis-
85 received from CX870 (Data- Updating fail 85 If the FL display stops at the Error dis-
Length/DataNo). play, press and hold the "Power opera-
66

Error
Code
Mismatched CheckSum in Check-
Sum comparison after rewriting.
A2 Unable to detect USB. ConnectionFailA2 If the FL display stops at the Error dis-
A3 No FirmwareFile in USB. FilesNotFound A3 If the FL display stops at the Error dis-
A4 NotMatchFirm A4 If the FL display stops at the Error dis-
A6 Updating fail A6 If the FL display stops at the Error dis-
A7 Updating fail A7 If the FL display stops at the Error dis-
information.
AE ConnectionFailAE If the FL display stops at the Error dis-
wareDownload.
AF FilesNotFound AF If the FL display stops at the Error dis-
Download.
TimeOut in Download (writing to
B1 Download fail B1 If the FL display stops at the Error dis-
SDRAM) for FirmwareDownload.
Error notification received after
B2 Updating fail B2 If the FL display stops at the Error dis-
rewriting CX870 Firm.
Error in FirmwareUpdate (Time-
Out).
Failed to transit to BootLoader-
Mode.
Failed to transit to Application-
Mode.
---Check the firmware version after updating.---
After updating the firmware, check the version. See "1. Version Display Mode" (21 page ).
67

1.11. Device display during firmware update
Display of target device during firmware update.
Target device Display Error code when an error occurs
08 - 0B
10 - 15
Main CPU Main:**% ***min 20 - 27
36 - 3B
3F
50 - 52
Sub Sub :**% ***min 54 - 58
5A - 64
50 - 52
Audio PLD APLD:**% ***min 54 - 58
5A - 64
50 - 52
VIDEO PLD VPLD:**% ***min 54 - 58
5A - 64
50 - 52
DSP DSP :**% ***min 54 - 58
5A - 64
50 - 52
54 - 58
GUI Serial Flash GUI :**% ***min 5A
62 - 64
80 - 86
A0 - A4
CX870 Boot Loader ESBL:**% ***min A6 - A7
AE - B5
A0 - A4
CX870 Image EIMG:**% ***min A6 - A7
AE - B5
CX870 Image (Emergency

Update retry –
Mode)
Checking the Firmware Version After an Update

After updating the firmware, check the version. See "1. Version Display Mode" (21 page ).
68

2. Updating by DPMS
Download the latest firmware from the internet and update the firmware.
2.1. Network Connection
(1) System Requirements
• A broadband internet connection
• Modem
• Router
• Ethernet cable (CAT-5 or greater recommended)
(2) Settings
Internet
Computer
Modem
ComputerLAN port / Ethernet connector
To WAN port
Router
DIGITAL AUDIO OPTICAL HDMI (ASSIGNABLE)
NETWORK (ASSIGNABLE) 1 2 1 2 3 4 5 6 7 HDMI
TV
AUDIO CD CBL/ DVD Blu-ray GAME MEDIA AUX2 CD
SAT PLAYER
CBL/SAT
COAXIAL
To LAN port AUDIO (ASSIGNABLE)

SUBWOOFER
COMPONENT VIDEO
1 CBL/SAT
PB/ PR/
(ASSIGNABLE)
2 DVD
PB/ PR/
1 Y CB CR Y CB CR
CBL/ 1
SAT
To LAN port 2
DVD
2
PB/ PR/
1 2 Y CB CR
CBL/SAT DVD MONITOR
VIDEO
ETHERNET connector
2.2. Check and update the firmware

Check whether new firmware is available. It is also possible to check approximately how long the update will take.
(1) Press the button "SETUP" on the remote control to display the GUI menu.
(2) Press the cursor button to select "General" → "Firmware" → "Update" → "Check Update".
(3) Press the button "ENTER".
• The latest firmware version uploaded to our website is displayed.
• Proceed to (4) if new firmware is available on our website.
• If the latest firmware is already installed, press the button "SETUP" to exit the menu.
(4) Select "Start" using the cursor buttons and then press "ENTER".
• The power display lights in red and the GUI screen display disappears during the update.
The remaining time of the update is shown on the display of the unit.
• The normal status resumes after the update is completed.
--- Precautions for Updates ---

• The environment and settings must allow connection to broadband Internet for updates.
• Never turn off the power before an update is completed.
• It takes around 1 hour to complete the update.
Once an update is started, normal operations cannot be performed until it is completed.
The GUI menu settings and image adjustment settings of this unit may be initialized.
Take note of your settings beforehand and reconfigure them after the update.
69

2.3. About the error code
See the following table for details on the error code, details of the error code, display and coping strategies when updating
the firmware from DPMS. (DPMS:Denon Product Management Server).
Error
Code
Initialize the unit and try updating again.

01 Failed to log in to DPMS. Login failed 01 Update in an environment where there
is a small network load.
Line etc. is congested when log- Update in an environment where there

02 Server is busy02
ging in to DPMS. is a small network load.
Check the network connection. Update

03 Connection to DPMS failed. ConnectionFail03 in an environment where there is a
small network load.

Firmware file data was requested
04 ConnectionFail04 in an environment where there is a
but error message was received.
small network load.

but it timed out.
small network load.

but error message was received.
small network load.

All firmware file information was
requested but a timeout occurred.
small network load.
Main CPU firmware file informa- Check the network connection. Update
08 tion was requested but error mes- ConnectionFail08 in an environment where there is a
sage was received. small network load.
Main CPU firmware file informa- Check the network connection. Update
09 tion was requested but error mes- ConnectionFail09 in an environment where there is a
sage was received. small network load.
Error (NG) message was received Check the network connection. Update
0A when firmware of Main CPU was Download fail 0A in an environment where there is a
downloaded. small network load.
Error (line congestion) message Check the network connection. Update

0B was received when firmware of Download fail 0B in an environment where there is a
Main CPU was downloaded. small network load.
Error (connection failure) mes- Check the network connection. Update

0C sage was received when firmware Download fail 0C in an environment where there is a
of Main CPU was downloaded. small network load.

Received an invalid pacage ver-
0D D o w n l o a d f a i l 0 D in an environment where there is a
sion.
small network load.

Connection to DPMS failed.
0E ConnectionFail0E in an environment where there is a
(Cannot get NTP)
small network load.
Main CPU failed to receive

Turn on the power again. Update will
10 firmware for rewriting sent from Updating fail 10 start automatically.
CX870 (when timed out).
70

Error
Code
Main CPU failed to receive

CX870 (when an error occurred).
Firmware for rewriting sent from

CX870 received by the Main CPU Turn on the power again. Update will
12 Updating fail 12
contained corrupt data (when the start automatically.
Check Sum error occurred).
The erasing of block data failed Turn on the power again. Update will
13 Erase fail 13
before Main CPU was rewritten. start automatically.
The rewriting of block data failed Turn on the power again. Update will
14 Updating fail 14
when Main CPU was rewritten. start automatically.
Data was found to be corrupt dur-

15 ing verification after the Main CPU UpdateCheckNG 15 start automatically.
was rewritten.
Failed to acquire the IP address Check the network connection. Update

20 before CX870 rewrite (Boot ConnectionFail20 in an environment where there is a
Loader Mode). (Auto IP) small network load.

21 before CX870 rewrite (Boot ConnectionFail21 in an environment where there is a
Loader Mode). (when timed out) small network load.
Initialize the unit and try updating again.

22 Failed to log in to DPMS. Login failed 22 Update in an environment where there
Line etc. is congested when log- Update in an environment where there

23 Server is busy23
ging in to DPMS. is a small network load.

24 Connection to DPMS failed. ConnectionFail24 in an environment where there is a
small network load.
Failed to change the CX870

25 ConnectionFail25 Initialize the unit and try updating again.
mode.
Timeout occurred obtaining data

when downloading the Main CPU Check the network connection. Update
26 firmware.Received an invalid pa- Download fail 26 in an environment where there is a
cage version. Received an invalid small network load.
pacage version.
Failed to change the CX870

27 Download fail 27 Initialize the unit and try updating again.
mode.
Log in to DPMS failed when re- Update in an environment where there

36 Login failed 36
writing the Main CPU. is a small network load.
Unit logs in to DPMS but the line

Update in an environment where there
37 etc. is congested when rewriting Server is busy37 is a small network load.
the Main CPU.

Connect to DPMS failed when
rewriting the Main CPU.
small network load.
71

Error
Code

Connection to DPMS has timed
out when rewriting the Main CPU.
small network load.

Error (NG) notification was re-
start automatically.
3A ceived when downloading firm- Download fail 3A Update in an environment where there
ware for rewriting the Main CPU.
Error notification (line congestion) Turn on the power again. Update will
was received when downloading start automatically.
3B Download fail 3B
firmware for rewriting the Main Update in an environment where there
CPU. is a small network load.
Error notification (connection Turn on the power again. Update will
failure) was received when down- start automatically.
3C Download fail 3C
loading firmware for rewriting the Update in an environment where there
Main CPU. is a small network load.

3D (Auto IP) before CX870 rewrite ConnectionFail3D in an environment where there is a
(Boot Loader Mode). small network load.

3E before CX870 rewrite (Boot ConnectionFail3E in an environment where there is a
Loader Mode) (timed out). small network load.
Log in to DPMS failed when rewrit- Update in an environment where there

50 Login failed 50
ing the DSP, PLD etc. firmware. is a small network load.
Unit logs in to DPMS to rewrite the

Update in an environment where there
51 DSP, PLD etc. firmware, but the Server is busy51 is a small network load.
line etc. is congested.
Connect to DPMS failed when Check the network connection. Update

52 rewriting the DSP, PLD etc. firm- ConnectionFail52 in an environment where there is a
ware. small network load.
Unit logs in to DPMS to rewrite the Turn on the power again. Update will
DSP, PLD etc. firmware, but error start automatically.
54 Updating fail 54
was received as firmware informa- Update in an environment where there
tion. is a small network load.
Unit logs in to DPMS to rewrite
the DSP, PLD etc. firmware, but
55 logged into DPMS and requested Updating fail 55 Update in an environment where there
firmware data information but a
timeout occurred.
Unit logs in to DPMS to rewrite the
56 DSP, DLP etc. firmware, but failed Download fail 56 Update in an environment where there
to download the firmware.
Unit logs in to DPMS to rewrite Turn on the power again. Update will
the DSP, DLP etc. firmware, but start automatically.
57 Download fail 57
download firmware error was Update in an environment where there
received (line congestion). is a small network load.
Unit logs in to DPMS to rewrite Turn on the power again. Update will
the DSP, DLP etc. firmware, but start automatically.
58 Download fail 58
download firmware error was Update in an environment where there
received (connection failure). is a small network load.
NACK was received when "C"

5A command was sent to DSP, PLD ConnectionFail5A start automatically.
etc.
NACK was received when "L"

5B command was sent to DSP, PLD Updating fail 5B start automatically.
etc.
72

Error
Code
DSP, PLD etc. failed to receive the

5C firmware for rewriting sent from Updating fail 5C start automatically.
DSP, PLD etc. failed to receive the

5D firmware for rewriting sent from Updating fail 5D start automatically.
DSP, PLD etc. receive the cor-

rupted firmware data for rewriting Turn on the power again. Update will
5E Updating fail 5E
sent from CX870 (when the Check start automatically.
Sum error occurred).
DSP, PLD etc. receive the cor-

rupted firmware data for rewriting Turn on the power again. Update will
5F Updating fail 5F
sent from CX870 (invalid data was start automatically.
received).
NACK was received when "P"

60 command was sent to DSP, PLD Updating fail 60 start automatically.
etc.
NACK was received when "I" com- Turn on the power again. Update will
61 UpdateCheckNG 61
mand was sent to DSP, PLD etc. start automatically.
Failed to obtain flash information Turn on the power again. Update will
80 Updating fail 80
before erasing the flash. start automatically.
Failed to erase the data before Turn on the power again. Update will
81 Updating fail 81
rewriting the flash. start automatically.
Failed to receive the serial flash



firmware for rewriting sent from Turn on the power again. Update will
84 Updating fail 84
CX870 (when the Check Sum er- start automatically.
ror occurred).
Failed to receive the the serial

flash firmware for rewriting sent Turn on the power again. Update will
85 Updating fail 85
from CX870 (invalid data was start automatically.
received).
Data was found to be corrupt dur-

86 ing verification after the flash was Updating fail 86 start automatically.
rewritten.

A0 (AutoIP) before CX870 rewrite ConnectionFailA0 in an environment where there is a
(Application Mode). small network load.

A1 before CX870 rewrite (Application ConnectionFailA1 in an environment where there is a
Mode) (whern timed out). small network load.
Unauthorized login DPMS access

notification was received when
A2 Login failed A2 in an environment where there is a
rewriting the CX870 related firm-
small network load.
ware (Application Mode).
73

Error
Code
Notified that the access to the
DPMS is congested line, when
A3 Server is busyA3 in an environment where there is a
rewriting the CX870 system (Ap-
small network load.
plication Mode).
Notified that the access to the
DPMS connection is failed, when
A4 ConnectionFailA4 in an environment where there is a
small network load.
plication Mode).
Logged into DPMS and error was Turn on the power again. Update will
received as firmware information, start automatically.
A6 Updating fail A6
when rewriting the CX870 system Update in an environment where there
(Application Mode). is a small network load.
Logged into DPMS and requested

firmware data information but
A7 a timeout occurred when when Updating fail A7 Update in an environment where there
plication Mode).
Error notification was received Turn on the power again. Update will
when downloading firmware for start automatically.
AE Download fail AE
rewriting the CX870 system (when Update in an environment where there
failed to download). is a small network load.
Error notification was received Turn on the power again. Update will
when downloading firmware for start automatically.
AF Download fail AF
rewriting the CX870 system (Boot Update in an environment where there
Loader Mode) (line congestion). is a small network load.
Error notification was received

when downloading firmware for
B0 rewriting the CX870 system (Boot Download fail B0 Update in an environment where there
Loader Mode) (When a connec-
tion failed).
Firmware downloding error no-
B1 tification was received (Timeout Download fail B1 Update in an environment where there
failure).
Error notification was received
B2 when rewriting the CX870 system Download fail B2 Update in an environment where there
firmware.
Notification is failed to rewriting start automatically.
B3 Updating fail B3
the firmware (Timeout failure). Update in an environment where there
Failed to change the CX870 sys-

B4 tem mode. Updating fail B4 Initialize the unit and try updating again.
(Boot Loader Mode)
Failed to change the CX870 sys-

B5 tem mode. Updating fail B5 Initialize the unit and try updating again.
(Application Mode)
74

Device display during firmware update
Display of target device during firmware update.
Target device Display Error code when an error occurs
08 - 0C
10 - 15
Main Main:**% ***min 22 - 24
36 - 3E
50 - 52
Sub Sub :**% ***min 54 - 58
5A - 64
50 - 52
Audio PLD APLD:**% ***min 54 - 58
5A - 61
50 - 52
VIDEO PLD VPLD:**% ***min 54 - 58
5A - 64
50 - 52
DSP DSP :**% ***min 54 - 58
5A - 61
50 - 52
54 - 58
GUI Serial Flash GUI :**% ***min 5A - 61
80 - 86
A0 - A4
CX870 Boot Loader ESBL:**% ***min A6 - A7
AE - B5
A0 - A4
CX870 Image EIMG:**% ***min A6 - A7
AE - B5
CX870 Image (Emergency Mode) Update retry –
Checking the Firmware Version After an Update

After updating the firmware, check the version.
See "1. Version Display Mode" ( 21 page ).
75

ADJUSTMENT
Adjusting Idling Current
1. Preparation
(1) Prepare a DV voltmeter.
(2) Place the unit in normal usage conditions, away from highly ventilated areas such as next to an air conditioning
machine or electric fan.
The set requires an ambient temperature of 15℃ to 30℃ and standard humidity.
(3) Settings of This Unit
• POWER (Power source switch) STANDBY
• SPEAKER (Speaker terminal) No load
( Do not connect equipment such as speakers or dummy resistors. )
2. Adjustment Procedure
(1) Remove the top cover and turn VR401, VR402, VR403, VR404, VR405, VR406 and VR407 of the 7CH AMP UNIT as
far anticlockwise(c) as possible.
(2) Connect the DC Voltmeter test points.
FRONT-Lch ：TP401
FRONT-Rch ：TP402
CENTER ch ：TP403
SURROUND-Lch ：TP404
SURROUND-Rch ：TP405
SURROUND-BACK Lch ：TP406
SURROUND-BACK Rch ：TP407
(3) Connect the power cord to an outlet. Next, press the power button to turn on the power.
(4) Set this unit as follows.
MASTER VOLUME : "---" anticlockwise (c min.)
SPEAKER (Speaker terminal) ：No load
( Do not connect equipment such as speakers or dummy resistors. )
MODE ：MCH STEREO
FUNCTION ：DVD
(5) Turn VR401 clockwise (x) and adjust the voltage of the test point to "6.0mV ± 0.5mV DC" within 2 minutes.
(6) 10 minutes after the preliminary adjustment, turn VR401 and set the voltage as "8.0mV ± 0.5mV DC".
(7) Adjust the variable resistance of each channel using the same method.
AMP UNIT
DC Voltmeter
VR404
TP401 TP403
VR401 VR403 VR402
VR405 VR406 VR407
TP404 TP405
TP402 TP406
C ch TP407
F Lch
S Lch S Rch
F Rch S Back Lch
S Back Rch
76

SURROUND
Contents MODES AND PARAMETERS
Connections Playback Settings Tips Appendix
Sound modes and channel output

S This indicates the audio output channels or surround parameters that can be set.
DThis indicates the audio output channels. The output channels depend on the settings of “Speaker Config.” (v p. 183).
Channel output
Sound mode (v p. 115)
Front L/R Center Surround L/R Surround back L/R Front height L/R Subwoofer
Direct/Pure Direct (2-channel) S Dz3
Direct/Pure Direct (Multi-channel) S D D D z1 Dz1 D
Stereo S D
Multi Ch In S D D Dz1 D
Dolby Pro Logic gz S D D D D
Dolby Pro Logic gx S D D D D
Dolby Pro Logic g S D D D
DTS Neo:6 S D D D D
Dolby Digital S D D D D z2 D
Dolby Digital Plus S D D Dz1 Dz1 D
Dolby TrueHD S D D Dz1 Dz1 D
DTS Surround S D D D Dz2 D
DTS 96/24 S D D D Dz2 D
DTS-HD S D D D z1 Dz1 D
DTS Express S D D D Dz2 D
Multi Ch Stereo S D D D D D
Rock Arena S D D D D D
Jazz Club S D D D D D
Mono Movie S D D D D D
Video Game S D D D D D
Matrix S D D D D D
Virtual S D
z1 A signal for each channel contained in an input signal is output as audio.
z2 Audio is output when the set sound mode name contains “+PLgz”.
z3 Audio is output when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v p. 188)
Contents Connections Playback Settings Tips Appendix
Sound modes and surround parameters

Front panel Display Rear panel 237 Remote Index
Surround Parameter (v p. 146)
Dialog Level Subwoofer Cinema EQ Loudness Dynamic Low Delay Effect Room Height
Sound mode (v p. 115) Adjust Level Adjust (v p. Management z1 Compression z2 Frequency Time Level Size Gain z4
(v p. 145) (v p. 145) 146) (v p. 146) (v p. 147) Effects z3 (v p. (v p. (v p. (v p.
(v p. 147) 148) 148) 149) 149)
Direct/Pure Direct (2-channel) z5 S z6 S S
Direct/Pure Direct (Multi-channel) z5 S S S S
Stereo S S S S
Multi Ch In S S S S S
Dolby Pro Logic gz S S S S S S
Dolby Pro Logic gx S S S S S
Dolby Pro Logic g S S S S S
DTS Neo:6 S S S S S
Dolby Digital S S S S S S
Dolby Digital Plus S S S S S S
Dolby TrueHD S S S S S S S
DTS Surround S S S S S S
DTS 96/24 S S S S S
DTS-HD S S S S S
DTS Express S S S S S
Multi Ch Stereo S S S S S S
Rock Arena S S S S S S S
Jazz Club S S S S S S S
Mono Movie S S S S S S S
Video Game S S S S S S S
Matrix S S S S S S
Virtual S S S S
z1 - z6 : “Sound modes and surround parameters” (v p. 240)
77

Surround Parameter (v p. 146)

Neo: 6 Audyssey (v p. 152)
Pro Logicg/gx Music mode only Music
modes only Restorer
Tone Control z7
Sound mode (v p. 115) z10
Panorama Dimension Center Center (v p. 111) MultEQ® XT Dynamic EQ z9 Dynamic (v p. 150)
(v p. 147) (v p. 148) Width Image z8 (v p. 152) (v p. 153) Volume
(v p. 148) (v p. z9 (v p. 154)
147)
Direct/Pure Direct (2-channel) z5
Direct/Pure Direct (Multi-channel) z5
Stereo S S S S
Multi Ch In S S S S
Dolby Pro Logic gz S S S S S
Dolby Pro Logic gx S S S S S S S S
Dolby Pro Logic g S S S S S S S S
DTS Neo:6 S S S S S S
Dolby Digital S S S S
Dolby Digital Plus S S S S
Dolby TrueHD S S S S
DTS Surround S S S S
DTS 96/24 S S S S
DTS-HD S S S S
DTS Express S S S S
Multi Ch Stereo S S S S S
Rock Arena S z11 S S S S
Jazz Club S S S S S
Mono Movie S S S S S
Video Game S S S S S
Matrix S S S S S
Virtual S S S S S
z5, z7 - z11: “Sound modes and surround parameters” (v p. 240)
z1 This item can be selected when a Dolby TrueHD signal is played.

z2 This item can be selected when Dolby TrueHD, Dolby Digital or DTS signal is played.
z3Front panel
This item Display
can be selected when Rearorpanel
a Dolby Digital or DTS signal 239
DVD-Audio is played. Remote Index
z4 This setting is available when the set sound mode name contains “+PLgz”.
z5 During playback in Pure Direct mode, the surround parameters are the same as in Direct mode.
z6 This setting is available when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v p. 188)
z7 This item cannot be set when “Dynamic EQ” is set to “On”. (v p. 153)
z8 This item cannot be set when Audyssey® Setup (Speaker Calibration) has not been performed.
z9 This item cannot be set when “MultEQ® XT” is set to “Off”. (v p. 152)
z10 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z11 In this sound mode, bass is +6 dB, and treble is +4 dB. (Default)
78

Types of input signals, and corresponding sound modes

F This indicates the default sound mode.
S This indicates the selectable sound mode.
2-channel signal Multi-channel signal
Analog /PCM Dolby Digital PCM DTS-HD DTS Express DTS DTS DTS Dolby TrueHD Dolby Digital Plus Dolby Digital EX Dolby Digital
Sound mode (v p. 115) NOTE (+/HD)/DTS (-HD) Multi ES ES
DSCRT MTRIX
6.1 6.1
DTS Surround
DTS-HD Mstr Fz6
DTS-HD Hi Res Fz7
DTS ES Dscrt6.1 z1 F
DTS ES Mtrx6.1 z1 F
DTS Surround F
DTS 96/24 F z8
DTS (–HD) + PLgx z1z2 S S S
DTS (–HD) + PLgz z3 S S S S S
DTS Express F
DTS Neo:6 z4 S S
Dolby Surround
Dolby TrueHD F
Dolby Digital+ F
Dolby Digital EX z1 S S
Dolby (D+) (HD) + EX z1 S S
Dolby Digital F F
Dolby (D) (D+) (HD) + PLgx z1z2 S S S S
Dolby (D) (D+) (HD) + PLgz z3 S S S S
Dolby Pro Logic g/gx z5 S S
Dolby Pro Logic gz z3 S S
z1 – z8 : “Types of input signals, and corresponding sound modes” (v p. 243)
2-channel signal Multi-channel signal

Analog /PCM Dolby Digital PCM DTS-HD DTS Express DTS DTS DTS Dolby TrueHD Dolby Digital Plus Dolby Digital EX Dolby Digital
Front panel
Sound mode (v p. 115) Display
NOTE Rear
(+/HD)/DTS (-HD) panel
Multi 241 Remote
ES ES Index
DSCRT MTRIX
6.1 6.1
Multi Ch In
Multi Ch In F
Multi Ch In + Dolby EX z1 S
Multi Ch In + PLgx z1z2 S
Multi Ch In + PLgz z3 S
Multi Ch In 7.1 z1 Fz10
Direct
Direct S z9 S S S S S S S S S S S
Pure Direct
Pure Direct S S S S S S S S S S S S
Original sound mode
Multi Ch Stereo S S S S S S S S S S S S
Rock Arena S S S S S S S S S S S S
Jazz Club S S S S S S S S S S S S
Mono Movie S S S S S S S S S S S S
Video Game S S S S S S S S S S S S
Matrix S S S S S S S S S S S S
Virtual S S S S S S S S S S S S
Stereo
Stereo F S S S S S S S S S S S
z1 – z3, z9, z10 : “Types of input signals, and corresponding sound modes” (v p. 243)
z1 This item can be selected when surround back speakers are used.
z2 The “Cinema” mode or “Music” mode can be selected. When using a single surround back speaker, the “Music” mode is used.
z3 This item can be selected when front height speakers are used.
z4 The “Cinema” mode or “Music” mode can be selected.
z5 The “Cinema” mode, “Music” mode or “Game” mode can be selected.
z6 This item can be selected when the input signal is DTS-HD Master Audio.
z7 This item can be selected when the input signal is DTS-HD Hi Resolution.
Front 242
z8 This panel Display
item can be selected when the input signal is DTS Rear
96/24. panel Remote Index
z9 The default sound mode for the AirPlay playback is Direct.
z10 This item can be selected when the input signals contain surround back signals.
79

TROUBLE SHOOTING
1. POWER
1.1. The unit does not power on
The unit does not power on
Does the power indicator on Does the power indicator on the

NO YES
the front panel flash in green front panel flash in red when the
or white when the power is power is turned on?
turned on?
NO
YES
Has a fuse broken? See "1.2.Fuse is blown."
NO
Is DC5V output even when

YES Is DC5V being supplied from NO the connector (N1029) sup- NO
TO "6. SMPS"
the SMPS PCB (CN4141) to plying power from the SMPS
(See 95 page)
the HDMI PCB? PCB to the HDMI PCB is
removed?
YES YES
Check for breakages and short

Check the circuits around
circuits in the circuits and parts be-
the Microprocessor on the
tween N1029 on the HDMI PCB and
HDMI PCB and replace any
the microprocessor power supply
faulty parts.
and replace any faulty parts.
Does the power display on

YES Are any parts not fully con- NO TO "3.5. Protection
the front panel change to
nected in the connectors that History Display Mode"
lighting in green after ap-
connect the PCBs? (See 50 page)
proximately 10 seconds?
NO YES
YES Connect the connectors cor-

Has a fuse broken? See "1.2.Fuse is blown."
rectly.
NO
Check the voltage of pins

0V Check the circuits around the Micropro-
1,3-7 of N1019 on the HDMI
cessor on the HDMI PCB and replace
PCB while the power display
any faulty parts.
is flashing in green or white.
0.6V or -0.6V
Remove the connector (CP4001) of the SPK PCB.

Check the "3.5. Protection history display mode"
(See 50 page)
1.2. Fuse is blown

Broken fuse
Check the rectifier diode in Check for short circuits between

Check for leaks and short
the rectifier circuit on the the regulator output terminal and
circuits in the parts on the
secondary side, and check GND in the power supply stabili-
primary side. Replace any
the circuit for short circuits. zation circuit. Replace faulty parts
faulty parts.
Replace any faulty parts. if there is a short circuit.
Replace the fuse after repair.
80

2. Analog video
COMPONENT/HDMI OUT NG
Input CVBS Input OMPONENT Input

Function：CBL / SAT Function：CBL / SAT HDMI
To A TO "3 HDMI/DVI"
<HDMI PCB> test point
B 11 HDMI PCB 7020-07498-020-0S [MP]
N1018
N1033
17
C2174 N1019 CLAMP1000
CLAMP1001
R2074
C2181
C2179
C2178
R1356
R1374
U1050 C1293 R1943 R1945
Pb
C2123 C1295 R1369C1292 R1371 U1045
R1361
R1355
R1360
R1354
R1350
R1357
Q1023
C2160C2161
R2078 C2125 R1376 C1288R1373 C1290 R1944 5M80ZT100C5N

R2066 C2128
R1351
I O
DSP1OUT64FS
N1032
R2068
C2175
C2177
DSP1IN F_FL
DSP1IN64FS
DSP1OUTFS
R1334
R1938 R1333
DSP1INFS
N1014
R1567
R1574
R1672
R1563
R1564
ICT OP ADJ FI
C1402
C1417
C1419
C1406
C1408
C1414
C1431
IN
R1340
R2067 D1138 C1908 N1000 R1001 DE R1673 R1674

U1052 C1433 PCK R1676
R1343
R1999 C2168 C2176 Q1025 Q1028Q1022 Q1020 R1583 R1682R1677

R1937
R1936
R1935
R1975
R1929
R2002 R1346 R1585 R1681
F/HDMI
C1911
R1339
R1974
R1338R1337
C2137 C1286 C1922 C1443 R1970

R1940
R1939
C1920 C1913
R2061
C2096
R1934
C2172
R2010 C1949 C1449 DA1.1V

R1930
R1942
R1941
R1971
R1349
R1347
VSYNC
N1028
C2115 R1573
C1672
R1716
R2013
R1715
C1619
R1972
R1575R1581
C1665
C2113 HSYNC
R1933
C2146 Q1030 R1973

C2111
C1968
R2017 N1027 R1577
R2021 C2149 C2136 C2058 C2059 Q1018
C2129
R1981
R1982
C1436
R1639
R1635
R1685
R1686
C1646C1670
C1645
C2151
R1576
K4T51163QJL1053
C2134 R1928 C1438
C2119 R1901 R1927 C1447
H
23
D
C
B
F
E
A
C2121 R1763 R1562R1824 R1704 PCK R1641
R1926 R1591 R1766C1456R1821 R1690
R1924 VSYNC
123
C2157 R2034 C2154 C1717 R1705 C1514 R1691 AVSDA
HSYNC
U1029
C1437 R1767 C1459 R1720 C1617
R1702 R1701
R2038 C2164 AVSCL
C2062 R1566 R1568 DE
R1593 C1463R1820 R1722 R1683
N1035
R2044 C2165 R1922 R1699 SPI_MO
C1448 C1466R1732
AC
AB
AA
W
M
C2162 R2047
U
R
P
N
K
H
R1724
D
C
B
Y
V
F
E
A
T
J
SPI_CS
789
R2058 C2159 R1917 C1453 R1726 1 SPI_MI
R1594 C1473 R1730 R1700 2
R2062 R1597 3 C1616
C2070 X1008 24.576MHZ
R1906 Q1072 R1728 4

C2171 R1669
C2082
R1703 5
R2069 R1713 6 R1668
C1915
C1906
C1904
R1908 R1599 BKT1001

C2064 C2063
7
R1905 R1904
R1667
R1822
R2072
R1823
8
C2180 C2163 U1040 R1710 9 TX_MISO_SF
Q1066 R1603 10 ADV8003_IN2
R2082 PCM9211 C1773 C1430
C1784
ADV8003_IN1
R1914
C2072 11
R1915
R1916
R2085 C1479 R1707 ADV8003_IN0
X100627MHZ
C1611 C1612
U1028 K4T51163QJ
C2185 C2073 Q1067 ADV8003_RST
R1731
U1041 R1596 R1706
N1034
R1588
R1662
TX_TEST1
L1029 R1912 5M80ZT100C5N
R1625
17
Q1049 Q1048 R1590 R1620
C1655
N1015 C1315 C1318 R1909 C1948 Q1073 18
19
R1911 C1467
R1797
M
N
H
R
P
D
C
B
F
E
A
L
J
R1879 D1124
R1913 R1795 C1470 R1621R1622R1623 R1624 R1697 20
21 D
D1073
N1017 R1719 22
123
C1945
C1944
R1698 C
U1024 R1721 23
L1040 R1178 R1184
2 40 ADSP21487 R1619 R1626 D1074 R1183
R1875 R1877 R1892

D1122 D1123 D1135
R1878
C1567
C1969 C1921
C1509 C1510 R1692 C1575 U1026 L1051 C1170 R1177
R1723 C1568 R1187R1180 D1076
R1258 X1005 R1725 ADV8003 R1188R1179D1075
15
789
L1047
C1569
L1044
L1045
R1076 R1727
CY 920 MODULE
C1574
R1695
R1254 21.875MHZ
R1874 R1876
L1046
R1885 R1886
R1479
D1126 D1125
1 39 R1070 R1075 R1729 L1043 E
R1482
R1481
C1751
R1484
H C1087D1025 C1543
R1363
R1522
R1365
Q1068 C1327 R1151
R1787
R1814
R1815
R1997
C1775
D1026R1069 R1696
R1746
R1750
R1147 R1150
L1136
C1713
R1081R1072D1028 C1551
N1029
C1350
C1351
R1998
R1504
R1505
R1506
R1717 C1153 D1061
R1742
C1708
D1104
R1082 R1071D1027 L1050 C1918 D1062 R1146
R1831
R1827
C1328
C1789
R1830
R1799
R1793
R1810
C1749
R1043 R1152 R1149 D1064
C1314 C1319
C1316 C1317
R1825
C1313 C1320
R1816 R1153 R1148D1063
R1638
R1637
R1039 R1042
D1089
C1357
R1519
R1521
R1520
R1518
R1517
R1545
R1544
R1817 U1033 R1513 R1514R1515 I C1070D1012 CLAMP1002 C1546

L1030
L1028
C1352
C1680
L1027
D1013 R1038 DV1.8V

Q1069
C1951
C1954
R1477
3.3V
C1353
C1727
C1681
R1364
R1345
R1362
R1344
C1840
C1297 C1296 R1044R1041D1015
C1941
R1741
C1923
C1354
R1510 R1045R1040D1014 R1826 C1942
R1512
R1378 R1377 R1516 C1675
Q1027 Q1026 U1007 C1346 C1940
L1055
Q1043
R1480
2 1 R1755
C1709 R1751
R1782
2 1
R1478
R1754
C1693
Q1059 Q1052
R1743
R1748
C1710
U1008
MAC ADDRESS LABEL

R1483
N1013 R1507
Q1060 R1503 J R1018 Q1063 C1707
G
R1756
R1380 R1779 R1778 R1509 R1014R1017 C1839
C2336
R1464 R1508 C1032D1000 Q1055 N1036
R1783
R1381 C1845
C1752
I O U1030 N1025 D1001 R1013 Q1062 Q1056
REQSOMI R1463 R1449
7
R1382 Q1041 R2165

R1773
R1769
R1772
N1021
C1729
R1383 C1698 C2104
R2148
R2152
R2157
R2176
R2177
R2178
R2179
R2180
C2308 R2120
C1326
R1412
R1414
R1418
C1331
C2301 R2119
R2129
R2125
R2164
R2135
R2139
NET1.2V C2318
R1396
R1398
R1399
R1867
R1865
R1864
R1861
R1858
R1855
ACKSIMO
R1126
CLKSIMO
R1216
R1217
R1031
R1271
SIMO
SOMI
DGND R1270 C2214 R1122 R1125
R1145
R1415 C2215 F C1115 D1049
D1002 R1015 R1021
D1003 R1016 R1019
R1427 R1233 R1833 C2202 D1050 R1121

R1127 R1124D1052 U1003 RX3SCL
AC
R1416 R1235 U1000 R2089 R2094C2189
C2320
AB
R1440R1417 R1236 MN864778 R2091 R2096C2188
AA R1129 R1123D1051 MN864778 RX3SDA
N1016 R1439 R2090 R2095C2187
Y
U1039
C1307 R1220 R2092 R2093C2206
W
C1865 C1684 MN864778
R1803
R1813
R1792
HAINT0 R1106
C1774
3.3V
V
R1120
C1302 R1898
R1117
N1009 C2319 R1102 R1105 R1161 C1943
U
R1734R1733
R1237 R2134 G C1090D1037 R1881 R1850
X1003 12MHZ
Q1050 C1703
T
C1305 C2321 R1160 Q1051 R1851
U1005R1207 R1238 D1038 R1101 C1769 R1882
C1758
C1772
C1704
R2122
C1304 R1163
R1437
C1336C1337
R1241 NET1.8V C2323 R1107R1104D1040 C1757 R1883 R1852

R1165 C1701
1.1V
C1306 R1242 C2322 R1108R1103D1039 R1166 C1770 R1894
C1303
C2055C2052
L1122 C1858 R1897 R1893
R1221
L1065
L1064
R1209 R1159
R1834 C1179 R1162
C1685
R1222
D1096
C1301 R1498 X1009 J

R2137
R1208 C1172
R1984
R1243
R1987
R1986
R1985
L1116
L1119
L1118
L1117
C1348 R1496
H
C1308 R1244 R1224 27MHZ
R1390 R1210
G
R1223 R1500 R1486 R1993 U1055 C1182
C1755
R1788
F
C1173 R1063
27MHZ
R1784
R1247R1785
C1160
C1697
R1225
R1245C1738
C1161
R1835 R1775
ADV7850
R1759
1.1V
E
X1007
R2133 HAINT1
R1753
R1389 C1174 R1226 C1078
D
D1114 D1118
23
R1171
D1115 D1119
NET2.5V
NET1.9V
R1388
C
C1309 R2136 B C2103
R1994 D1112 D1116
D1005D1007
D1009D1011
C1300
D1008D1010
27MHZ
D1004D1006
L1123 L1112
L1113
A
U1018 D1113 D1117
X1000
C1311 A
27MHZ
X1001
C1086
U1063
R1798R1809
CH0AMCLK
R1068R1060
R1066R1061
R1067R1062
R1080
R5F56108VNFP C1312
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
A BKT1000 C1834
R1454 R1800 HPD_P1 HSDA U1062 R1853
C1702
HPD_P2
C1785
R1255
L1121
R1989
R1990
R1265
L1120
R1991
R1988
R1428
R1384 R1267 R1854

R1467
C1077
R1431
C1339
C1325
R1805
D1106
C1195 C1198 C1310 C1344 HSCL R1206

C1691 NIRQA0
L1017 L1018 C1299 C1345 C1690 C1754 NIRQA1
R1747
C1688 C1687 R1186 C1696
C1686
R1095 U1061 D1130D1133 D1134
D1092
D1085 D1086D1087 D1088 C1689 CH0ASD1

R1268 C1202
D1044D1042
D1048D1046
N1011 D1129
D1043D1041
D1047D1045
R1737 R1738 R1170 R1204 C1838
L1063 D1127 D1128 D1131 D1132 CH0ASD0
R1248 C1201 R1169
R1452
C1341
C1343
R1199 L1105
C1841
D1021D1023
U1002
D1017D1019
C2105 64 63
D1020D1022
D1016D1018
64 63 R1168 L1062
R1880 C2043C2042
C1850
SW2_HINT L1104 C1856
D1058 D1060
D1095
D1054D1056
C2044
INT
R1887
D1053D1055
D1057D1059
C1204 L1057 D1079D1080D1083D1084 C1747 C1746 R1866
R1253
R1213
U1019
R1272
USB_PWR_EN R1257 R1251 SW1_HINT D1024

C1089
C1203 SW1 L1059 D1077D1078D1081D1082 R1777

N1008 L1014
R1872
N1010 R1256 R1252
C1181
R1776
C1184
R1262 R1250
D1030
D1034
L1015
C2088
D1029
D1033
C2089 Q1058
C2084
D1137 R1956 C2087 R1946 U1006 R1212

EXT C1867 C1866
R1983
R1958 D1136 R1948 R1215 Q1003 1.1V
Z1001 C1186 J R1856 R1859 R1862
R1891
R1249
R1888
R1959 R1949 R1736
D1036
D1032
D1091 D1107 D1108 D1109

D1031
D1035
R1096
R1097
Q1009
IN2_DET
Q1016 IN7_DET
R1873
R1455
D1121
C1907
Q1010
R1456 C1916 D1067 D1068D1071D1072 R1857 R1860 R1863

R1435 D1090 R1443
R1448
C1333
Q1015
D1111 D1110 D1120
R1099
D1065 D1066D1069D1070
D1094
C1185
1.HPD
K1003 K1002 C2090 C1905R1967C2091 R1969 IN2 IN3
Q1005 IN4 IN5 IN6
IN7 C
R1869 R1870 R1871
IN1_DETN1001 DDCSDA N1002 DDCSDA IN3_DET N1003 DDCSDA DDCSDAQ1012 Q1011 N1005 DDCSDA IN6_DETN1006 N1007 DDCDATA N1031
N1030
U1043 U1044 R1968 IN2+5V
IN4_DETN1004 DDCCLK
IN3+5V IN4+5V IN5+5V DDCSDA
I IN6+5V
G F
2.DDCDATA
IN1
+5V
2.DDCCLK
IN7+5V
D1093
K1000
K1001
2.HPD
DDCSDA
C1338
C1340
IN4 IN5_DET
IN1 IN2 IN3 H DDCSCK IN5 IN6 E D IN7
DDCSCK DDCSCK DDCSCK DDCSCK DDCSCK DDCSCK
IN1 IN2 IN3 IN4 IN5 IN6 IN7 OUT1 OUT2

Detail A Detail B
MAC ADDRESS LABEL
6pin
N1018
17
CLAMP1000
R2089
C2104 4pin
R2091 2pin
R2129
DSP1IN F_FL
3pin
DSP1IN64FS
R2090
DSP1INFS
C1402
C1431
R2094C2189
C1433
5pin
C2320
R1583
R2092
R2096C2188 R1585
R2095C2187
R2093C2206
<Video PCB> test point

JACK5000
JACK5003
JACK5002
JACK5005 JACK5001 JACK5004
BKT5003
RC-5 DVD-Cr OUT_Cr DVD-Cb OUT_Cb DVD-Y OUT_Y SAT-Cr C-OUT SAT-Cb C-DVD SAT-Y C-SAT PRE_SW2 PRE_SW1 Z2_L Z2_R
C5025 C5024 C5023 C5021

J5039
C5018 C5026
J5039
C5017 C5027
VIDEO B'D
7028-07494-102-0
J5071
J5021
J5001 J5022
R5718 J5038 C4203
J5000 J5000 J5031
J5005 C4211 C4205 C4202
J5054
C5022
BAR CODE
J5053
J5032
J5035
J5033
J5041
Pb
J5043
J5052
IN ICT OP ADJ FI J5024 C4222 CN5003

J5032 J5033
J5036
J5037
C4210 C4206 C4221 ZONE2_L

J5025 J5030 AGND
ZONE2_R
MUTE_Z2
J5027 J5013 PRE_MUTE
17P
C5011 PRE_SW1
J5051 AGND
J5028 J5014 J5070 C4220 D5V(MX)
KILLIR
RC_OUT
FRONT_IRIN
J5026 J5029
J5050
RC_IN
VOL_MUTE
J5072 M3.3V
J5047
J5044
J5048
J5049
J5042
MUTE_3.3V
A_-7V
A_-7V
J5040 J5006
J5069
C5662
ZD4200
ZJ3.6B
J5016 J5007
C4247
J5017 J5008
J5055
D4211
D4210
R5710
R5711
J5018 J5009
J5046
J5004 J5045 J5068 J5057
J5011 J5002
J5010
R4298
R4297
R4301
J5012
J5056
J5003
J5023
C5029
COMPONENT SW2
C5028
C5029 +side
COMPONENT SW1
C4250 C4249 C4248 C4251

PREMUTE_SB
PREMUTE_S
PREMUTE_F
C5031 -side
AMP_MUTE
MUTE_+7V
D/MGMD
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
D4212
VDICR
VDICB
VDIPY
V.AUX
V_INC
V_INB
V_INA
VGND
VGND
CVBS
V+5V
V+5V
C5031
V-5V
V-5V
NC
NC
NC
CN5000 CN5001 CN5004
11P 13P 7P
81

A Input
CVBS / COMPONENT
q
Check the input signal to the
VIDEO DECODER.
Can a signal be confirmed at
the following points?
HDMI PCB NO NO
V : R2092 Check the connection between Input CVBS：Check B
COMPONENT-Y : R2089 the PCBs. Input COPONENT：Check C
COMPONENT-Cb : R2091
COMPONENT-Cr : R2090
YES
Output COMPONENT NG : Check C-4

Output HDMI NG : See 3. HDMI/DVI
82

B Input
CVBS
q
Check the set value of each
IC. Are the voltage values as
follows?
HDMI PCB NO
N1018 - 3pin : Hi(3.3V) The HDMI PCB is faulty.
N1018 - 4pin : Hi(3.3V)
N1018 - 5pin : Lo(0V)
YES
w
Use the jigs to extend the
HDMI PCB.
e
Is the power supply voltage
being output correctly? NO Check the connection between the
V+5V : C5029 : + side FRONT CONNECTOR PCB and the
V-5V : C5031 : - side VIDEO PCB.
YES
r
Is a signal being output from NO •Check the IC5001 power supply
the video amplifier? voltage and check the soldering of
CVBS : J5039 the surrounding circuits.
•The circuit between IC5001 and
JACK5000 are faulty.
YES
The circuit between IC5001

and JACK5000 are faulty. b All parts are VIDEO PCB parts unless otherwise specified.
83

C Input
COMPONENT
Check the set value of each

IC. Are the voltage values as
follows? NO
HDMI PCB The HDMI PCB is faulty.
N1018 - 2pin : Lo(0V)
N1018 - 6pin : Hi(3.3V)
YES
w
Use the jigs to extend the
HDMI PCB.
e
Is the power supply voltage
being output correctly? NO Check the connection between the
V+5V : C5029 : + side FRONT CONNECTOR PCB and the
V-5V : C5031 : - side VIDEO PCB.
YES
r
Is a signal being output from
•Check the IC5001 power supply voltage and check the soldering of the surround-
the video amplifier? NO ing circuits.
COMP-Y : J5032
•The circuit between IC5002 and JACK5000 are faulty.
COMP-CB : J5033
•Check the cable between the unit and the player, and check the player itself.
COMP-CR : J5000
YES
The circuit between IC5002

and JACK5000 are faulty.
b All parts are VIDEO PCB parts unless otherwise specified.
84

3. HDMI/DVI
3.1. No picture or sound is output (HDMI to HDMI)
No picture or sound is output.
Check the connection of the HDMI/DVI cable.
NO
(1) Is the HDMI/DVI cable correctly inserted? Check the connection of the HDMI/DVI cable.
YES
YES
(2) Is an HDMI/DVI selector, repeater or image quality improvement Remove all of these and connect only the HDMI/DVI
device being used? cable.
NO
NO
(3) Is a certified HDMI cable (with the HDMI mark) being used? Use a certified HDMI cable (with the HDMI mark).
YES
NO Replace the HDMI/DVI cable with one shorter than 5m

(4) Is the HDMI/DVI cable shorter than 5m?
(2m is recommended) and check again.
YES
YES
(5) Are a picture and sound output when a different HDMI/DVI cable is
The HDMI/DVI cable is faulty.
used?
NO
Check the Blu-ray/DVD player.
NO
Check the instruction manual of the Blu-ray/DVD player
(6) Are the HDMI output settings of the Blu-ray/DVD player correct?
and set the HDMI output correctly.
YES
(7) If using a DENON Blu-ray/DVD player, is the "HDMI" indicator of

the fluorescent display lit?
Proceed to YES if using a Blu-ray/DVD player from another com-
pany.
YES
(8) Are a picture and sound output YES Set the output resolution of the Blu-ray/DVD player to a
NO when the resolution of the Blu-
resolution supported by the TV.
ray/DVD player is changed?
NO
YES
(9) Is sound output from the speaker terminal of this unit when the The Blu-ray/DVD player may not support the HDCP
power of the TV is turned off or the cable connecting the TV to this repeater function.
unit is removed? Check with the manufacturer of the Blu-ray/DVD player.
NO
YES
(10) Are a picture and sound
output when a different Blu- The Blu-ray/DVD player is faulty.
ray/DVD player is used?
NO
85

Check the TV.
NO Use a TV that supports HDCP. Computer monitors can-

(11) Does the TV support HDCP?
not be used.
YES
NO
If the TV does not support 1080P, a picture cannot be
(12) Does the TV support 1080P?
output even if the Blu-ray/DVD player is set to 1080P.
YES
NO
Check the instruction manual of the TV and check the
(13) Is HDMI input set on the TV?
input setting.
YES
NO
(14) Are a picture and sound output when a different TV is used? The TV is faulty.
YES
Check the unit.
Check the firmware. YES •Check the circuits around the IP SCALER (U1026,
Is "IP SCALER NG" displayed? HDMI PCB) and DDR2 (U1028/1029).
(See 23 page) If there appear to be no problems, U1026 or U1028/1029
NO is faulty.
See "AVR-X2100W-S900_HDMI Rx-Tx Failure Detection Procedure

Manual ver_1.00" of SDI.
86

4. AUDIO
4.1. AUDIO CHECK
No audio output
CHECK1 INPUT SURROND MODE SOURCE NO Check the ANALOG AUDIO

Audio output OK? ANALOG 2CH DIRECT ANALOG BLOCK
YES
CHECK2 INPUT SURROND MODE SOURCE NO

Check the DIGITAL AUDIO
Legacy BLOCK
Audio output OK? COAX or OPT Don't care
(PCM or DolbyDigital or dts…)
YES

Check the ADC BLOCK
Audio output OK? ANALOG 2CH MULTICH STEREO ANALOG
YES

Legacy Check the HDMI BLOCK
Audio output OK? HDMI Don't care
(PCM2ch or DolbyDigital or dts…)
YES
CHECK5 INPUT SURROND MODE SOURCE

HBR audio
Audio output OK? HDMI Don't care
(DolbyTrueHD or dtsHD MA)
YES (DIGITAL AUDIO BLOCK is OK)
NO
Check for other causes
CHECK6 INPUT Connect

HDMI This unit's HDMI OUT → Other AVR's HDMI IN
AVR's (connected in HDMI) audio out-
Setting SURROND MODE SOURCE
put OK?
CEC STANDBY Don't care HBR audio (DolbyTrueHD or dtsHD MA)
YES NO
Check the DIGITAL AUDIO BLOCK Check the HDMI BLOCK
87

4.2. Power AMP (AMP PCB)
No audio output.
Protection is activated.
YES
Is the power transistor open or short circuit- YES

ed? Replace the power transistor.
2SB1560/2SD2390
NO
Is the emitter resistor of the power transistor YES

open? Replace the emitter resistor.
0.47Ω
NO
Is the base resistor of the power transistor YES

open? Replace the base resistor.
22Ω
NO
Is the trimmer potentiometer between the YES

base of the power transistor open? Replace the trimmer potentiometers.
1kΩ
NO
YES
Are any other transistors faulty? Replace the transistor.
NO
YES
Are any other resistors faulty? Replace the resistor.
NO
Turn on the power and check that the voltage of each part is correct and that there is an idling cur-
rent.
88

4.3. Analog audio
No audio output.
Is a voltage of ±7V supplied to INPUT NO

Repair the ±7V power supply.
PCB CN4006?
YES
Is there an audio signal in INPUT YES

Repair the power amplifier.
PCB CN401?
NO
NO
Connect the connectors correctly.
Is electron volume serial data being NO

Is the connector correctly connected
sent to INPUT PCB CN4200? with HDMI PCB?
YES
Repair the HDMI PCB.
YES
Once more, connect the connectors correctly.

If the malfunctioning channel and function can be identified, check the corresponding
signal path.
89

5. Network/Bluetooth/USB
5.1. Cannot connect to the network
Check the connection environment
NO
Insert the LAN cable correctly and then turn
Is the LAN cable correctly inserted?
on the power again.
YES
Check the connection environment
YES
NO Set the IP address, etc. correctly.

Are the network settings of this unit correct? If the IP settings are fixed, check that no
other devices have the same IP address and
that the subnet mask settings are correct.
YES
Are peripheral devices such as the router and hub connected cor- NO
Connect the peripheral devices correctly.
rectly?
YES
Check the instruction manual of the router

NO and configure the settings correctly.
Are the router settings correct?
Check that there are no connection restric-
tions by MAC addresses, etc.
YES
Checking the unit
90

NO
Can a voltage (5V) be confirmed between pin 2 and pin 5 of The circuit between the AC inlet and N1029
N1029? is faulty. Check the SMPS PCB.
YES
NO NO
Can an output voltage (3.3V) to Is D5V_POWER (U1018 uCOM 85pin) The circuit of D5V_POWER between
U1070(DC-DC Conv.) be confirmed? "Hi" ? U1018 and U1070 are faulty.
YES
YES
The circuit around U1070(DC-DC.
Conv.) is faulty.
NO NO
Can an output voltage (3.3V) to Is E_POWER1 (U1018 uCOM 53pin) The circuit of E_POWER1 between
Q1071(FET_SW) be confirmed? "Hi" ? U1018 and Q1071 are faulty.
YES
YES
The circuit around Q1071(FET_SW) is
faulty.
NO NO
Can an output voltage (1.2V) to U1067 Is E_POWER4 (U1018 uCOM 53pin) The circuit of E_POWER4 between
be confirmed? "Hi" ? U1018 and Q1071 are faulty.
YES
YES
Conv.) is faulty.
NO NO
Can an output voltage (1.9V) to U1069 Is E_POWER2 (U1018 uCOM 54pin) The circuit of E_POWER2 between
be confirmed? "Hi" ? U1018 and U1069 are faulty.
YES
YES
Conv.) is faulty.
NO
Are the versions of the Ethernet SBL and IMG displayed in Version
The Ethernet software is faulty.
Check Mode?
YES
The circuit around CX870 is faulty.
91

5.2. Cannot connect to the Bluetooth
Can a voltage (5V) be confirmed between pin 1 and pin 4 of N1036 on NO The circuit between the AC inlet and N1036 is faulty.
HDMI PCB? Check the SMPS PCB.
YES
The circuit between N1036 of the HDMI PCB and

Can a voltage (5V) be confirmed pin 10 of CP6001 on Bluetooth NO
CP6001 of the Bluetooth PCB are faulty of wire or
PCB?
board.
YES
Can a voltage (3.3V) be confirmed pin 6 of CP6001 on Bluetooth NO The circuit around Q1071 or U1070 of the HDMI
PCB? PCB is faulty.
YES
NO
Can a voltage (3.6V) be confirmed pin 1 of U6001 on Bluetooth PCB? The circuit around U6001 is faulty.
YES
Can a waveform (32.768kHz) be confirmed pin 4 of IC6000 on Blue- NO

The oscillation circuit including IC6000 is faulty.
tooth PCB?
YES
NO The circuit between CX870 and CP6001 of the

Is 1pin(LDO_ON) of Bluetooth PCB CP6001 "Hi"?
LDO_ON are faulty.
YES
The circuit around Bluetooth Module (iBT-06-02S) or CX870 is faulty.
92

5.3. A connected USB device is not recognized.
Check the USB device being used
YES
Is a USB hub being used? Do not use a USB hub.
NO
This unit supports devices in the FAT16 and

NO FAT32-formatted mass storage class, MTP-
Is the USB device supported by this unit?
compatible devices and iPods (with the
exception of some models).
YES
Checking the unit
Are CN4402 of the 870JUNCTION PCB and N7000 of the USB PCB NO
Connect the connectors correctly.
correctly connected?
YES
Can a voltage (5V) be confirmed between pin 1 and pin 4 of CP4406 NO The circuit around U7000 of the 870JUNC-
(USB Connector) on USB PCB? TION PCB is faulty.
YES
The USB signal circuit between CX870 and CP4406 of the USB PCB
are faulty.
5.4. No picture or sound is output
Checking the unit (If no picture is output)
NO The circuit around CX870, U1045(V.PLD) is

Are digital video signals((920PCK, 920VD0 - 920VD7)) output from
CX870 to U1045(V.PLD)? faulty.
YES
•Check the VIDEO circuit of U1026 (ADV8003) or later.
Checking the unit:(If no sound is output)
Are I2S signal output to pin 26, 28, 30, 34 of the U1008 HDMI PCB ? NO The circuit around CX870 or CX870JUNCTION PCB
(The 30, 32, 34pin in the case of DSD) is faulty.
YES
NO
Are audio signal output to pin 8 of U1041(A.PLD) on HDMI PCB. The circuit around U1041(A.PLD) is faulty.
YES
Check the AUDIO circuit of U1024(DSP) or later.
93

HDMI test point
11 HDMI PCB 7020-07498-020-0S [MP]
N1018
N1033
17
C2174 N1019 CLAMP1000
CLAMP1001
R2074
C2181
C2179
C2178
R1356
R1374
U1050 C1293 R1943 R1945
Pb
C2123 C1295 R1369C1292 R1371 U1045
R1361
R1355
R1360
R1354
R1350
R1357
Q1023
C2160C2161
R2078 C2125 R1376 C1288R1373 C1290 R1944 5M80ZT100C5N
R2066 C2128
R1351
I O
DSP1OUT64FS
N1032
R2068
C2175
C2177
DSP1IN F_FL
DSP1IN64FS
DSP1OUTFS
R1334
R1938 R1333
DSP1INFS
N1014
R1567
R1574
R1672
R1563
R1564
ICT OP ADJ FI
C1402
C1417
C1419
C1406
C1408
C1414
C1431
IN
R1340
R2067 D1138 C1908 N1000 R1001 DE R1673 R1674
C1433 PCK
U1045
U1052 R1676
R1343
R1999 C2168 C2176 Q1025 Q1028Q1022 Q1020 R1583 R1682R1677
R1937
R1936
R1935
R1975
R1929
R2002 R1346 R1585 R1681
F/HDMI
C1911
R1339
R1974
R1338R1337
C2137 C1286 C1922 C1443 R1970
R1940
R1939
C1920 C1913
R2061
C2096
R1934
C2172
R2010 C1949 C1449 DA1.1V
R1930
R1942
R1941
R1971
R1349
R1347
VSYNC
N1028
C2115 R1573
C1672
R1716
R2013
R1715
C1619
R1972
R1575R1581
C1665
C2113 HSYNC
R1933
C2146 Q1030 R1973
C2111
C1968
R2017 N1027 R1577
R2021 C2149 C2136 C2058 C2059 Q1018
C2129
R1981
R1982
C1436
R1639
R1635
R1685
R1686
C1646C1670
C1645
C2151
R1576
K4T51163QJL1053
C2134 R1928 C1438
C2119 R1901 R1927 C1447
H
23
D
C
B
F
E
A
C2121 R1763 R1562R1824 R1704 PCK R1641
R1926 R1591 R1766C1456R1821 R1690
R1924 VSYNC
123
C2157 R2034 C2154 C1717 R1705 C1514 R1691 AVSDA
HSYNC
U1029
C1437 R1767 C1459 R1720 C1617
R1702 R1701
R2038 C2164 AVSCL
C2062 R1566 R1568 DE
U1024 C1463R1820
R1593 R1722 R1683
N1035
R2044 C2165 R1922 R1699 SPI_MO
C1448 C1466R1732
U1041
AC
AB
AA
W
M
C2162 R2047
U
R
P
N
K
H
R1724
D
C
B
Y
V
F
E
A
T
J
SPI_CS
789
R2058 C2159 R1917 C1453 R1726 1 SPI_MI
R1594 C1473 R1730 R1700 2
R2062 R1597 3 C1616
C2070 X1008 24.576MHZ

R1906 Q1072 R1728 4
C2171 R1669
C2082
R1703 5
R2069 R1713 6 R1668
C1915
C1906
C1904
R1908 R1599 BKT1001
C2064 C2063
7
R1905 R1904
R1667
R1822
R2072
R1823
8
C2180 C2163 U1040 R1710 9 TX_MISO_SF
Q1066 R1603 10 ADV8003_IN2
R2082 PCM9211 C1773 C1430
C1784
U1026
ADV8003_IN1
R1914
C2072 11
R1915
R1916
R2085 C1479 R1707 ADV8003_IN0
X100627MHZ
C1611 C1612
U1028 K4T51163QJ
C2185 C2073 Q1067 ADV8003_RST
R1731
U1041 R1596 R1706
N1034
R1588
R1662
TX_TEST1
L1029 R1912 5M80ZT100C5N
R1625
17
Q1049 Q1048 R1590 R1620
C1655
N1015 C1315 C1318 R1909 C1948 Q1073 18
19
R1911 C1467
R1797
M
N
H
R
P
D
C
B
F
E
A
L
J
R1879 D1124
R1913 R1795 C1470 R1621R1622R1623 R1624 R1697 20
21 D
D1073
N1017 R1719 22
123
C1945
C1944
R1698 C
U1024 R1178 R1184
N1029
23
2 R1721 L1040
40 ADSP21487 R1619 R1626 D1074 R1183
R1875 R1877 R1892

D1122 D1123 D1135
R1878
C1567
C1969 C1921
C1509 C1510 R1692 C1575 U1026 L1051 C1170 R1177
R1723 C1568 R1187R1180 D1076
R1258 X1005 R1725 ADV8003 R1188R1179D1075
15
789
L1047
C1569
L1044
L1045
R1076 R1727
CY 920 MODULE
C1574
R1695
R1254 21.875MHZ
R1874 R1876
L1046
R1885 R1886
R1479
D1126 D1125
1 39 R1070 R1075 R1729 L1043 E
R1482
R1481
C1751
R1484
H C1087D1025 C1543
R1363
R1522
R1365
Q1068 C1327 R1151
R1787
R1814
R1815
R1997
C1775
D1026R1069 R1696
R1746
R1750
R1147 R1150
L1136
C1713
R1081R1072D1028 C1551
N1029
C1350
C1351
R1998
R1504
R1505
R1506
R1717 C1153 D1061
R1742
C1708
D1104
R1082 R1071D1027 L1050 C1918 D1062 R1146
R1831
R1827
C1328
C1789
R1830
R1799
R1793
R1810
C1749
R1043 R1152 R1149 D1064
C1314 C1319
C1316 C1317
R1825
C1313 C1320
R1816 R1153 R1148D1063
R1638
R1637
R1039 R1042
D1089
C1357
R1519
R1521
R1520
R1518
R1517
R1545
R1544
R1817 U1033 R1513 R1514R1515 I C1070D1012 CLAMP1002 C1546
L1030
L1028
C1352
C1680
L1027
D1013 R1038 DV1.8V

Q1069
C1951
C1954 U1008
R1477
3.3V
C1353
C1727
C1681
N1036
R1364
R1345
R1362
R1344
C1840
C1297 C1296 R1044R1041D1015
C1941
R1741
C1923
C1354
R1510 R1045R1040D1014 R1826 C1942
R1512
R1378 R1377 R1516 C1675
Q1027 Q1026 U1007 C1346 C1940
L1055
Q1043
R1480
2 1 R1755
C1709 R1751
R1782
2 1
R1478
R1754
C1693
Q1059 Q1052
R1743
R1748
C1710
U1008
MAC ADDRESS LABEL
R1483
N1013 R1507
Q1060 R1503 J R1018 Q1063 C1707
R1380 G R1779 R1778 R1756 R1509 R1014R1017 C1839
C2336
R1464 R1508 C1032D1000 Q1055 N1036
R1783
R1381 C1845
C1752
I O U1030 N1025 D1001 R1013 Q1062 Q1056
REQSOMI R1463 R1449
7
R1382 Q1041 R2165
R1773
R1769
R1772
N1021
C1729
R1383 C1698 C2104
R2148
R2152
R2157
R2176
R2177
R2178
R2179
R2180
C2308 R2120
C1326
R1412
R1414
R1418
C1331
C2301 R2119
R2129
R2125
R2164
R2135
R2139
NET1.2V C2318
R1396
R1398
R1399
R1867
R1865
R1864
R1861
R1858
R1855
ACKSIMO
R1126
CLKSIMO
R1216
R1217
R1031
R1271
SIMO
SOMI
DGND R1270 C2214 R1122 R1125
R1145
R1415 C2215 F C1115 D1049
D1002 R1015 R1021

D1003 R1016 R1019
R1427 R1233 R1833 C2202 D1050 R1121
R1127 R1124D1052 U1003 RX3SCL
AC
R1416 R1235 U1000 R2089 R2094C2189
C2320
AB
R1440R1417 R1236 MN864778 R2091 R2096C2188
AA R1129 R1123D1051 MN864778 RX3SDA
N1016 R1439 R2090 R2095C2187
Y
U1039
C1307 R1220 R2092 R2093C2206
W
C1865 C1684 MN864778
R1803
R1813
R1792
HAINT0 R1106
C1774
3.3V
V
R1120
C1302 R1898
R1117
N1009 C2319 R1102 R1105 R1161 C1943
U
R1734R1733
R1237 R2134 G C1090D1037 R1881 R1850
X1003 12MHZ
Q1050 C1703
T
C1305 C2321 R1160 Q1051 R1851
U1005R1207 R1238 D1038 R1101 C1769 R1882
C1758
C1772
C1704
R2122
C1304 R1163
R1437
C1336C1337
R1241 NET1.8V C2323 R1107R1104D1040 R1165 C1701 C1757 R1883 R1852
1.1V
C1306 R1242 C2322 R1108R1103D1039 R1166 C1770 R1894
U1018
C1303
C2055C2052
L1122 C1858 R1897 R1893
R1221
L1065
L1064
R1209 R1159
R1834 C1179 R1162
C1685
R1222
D1096
C1301 R1498 X1009 J
R2137
R1208 C1172
R1984
R1243
R1987
R1986
R1985
L1116
L1119
L1118
L1117
C1348 R1496
H
C1308 R1244 R1224 27MHZ
R1390 R1210
G
R1223 R1500 R1486 R1993 U1055 C1182
C1755
R1788
F
C1173 R1063
27MHZ
R1784
R1247R1785
C1160
C1697
R1225
R1245C1738
C1161
R1835 R1775
ADV7850
R1759
1.1V
E
X1007
R2133 HAINT1
R1753
R1389 C1174 R1226 C1078
D
D1114 D1118
23
R1171
D1115 D1119
NET2.5V
NET1.9V
R1388
C
C1309 R2136 B C2103
R1994 D1112 D1116
D1009D1011
D1005D1007
C1300
D1008D1010
27MHZ
D1004D1006
L1123 L1112
L1113
A
U1018 D1113 D1117
X1000
C1311 A
27MHZ
X1001
C1086
U1063
R1798R1809
CH0AMCLK
R1068R1060
R1066R1061
R1067R1062
R1080
R5F56108VNFP C1312
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
A BKT1000 C1834
R1454 R1800 HPD_P1 HSDA U1062 R1853
C1702
HPD_P2
C1785
R1255
L1121
R1989
R1990
R1265
L1120
R1991
R1988
R1428
R1384 R1267 R1854

R1467
C1077
R1431
C1339
C1325
R1805
D1106
C1195 C1198 C1310 C1344 HSCL R1206

C1691 NIRQA0
L1017 L1018 C1299 C1345 C1690 C1754 NIRQA1
R1747
C1688 C1687 R1186 C1696
C1686
R1095 U1061 D1130D1133 D1134
D1092
D1085 D1086D1087 D1088 C1689 CH0ASD1

R1268 C1202
D1044D1042
D1048D1046
N1011 D1129
D1043D1041
D1047D1045
R1737 R1738 R1170 R1204 C1838
L1063 D1127 D1128 D1131 D1132 CH0ASD0
R1248 C1201 R1169
R1452
C1341
C1343
R1199 L1105
C1841
D1021D1023
U1002
D1017D1019
C2105 64 63
D1020D1022
D1016D1018
64 63 R1168 L1062
R1880 C2043C2042
C1850
D1058 D1060
D1095
D1054D1056
C2044
INT
R1887
D1053D1055
D1057D1059
C1204 L1057 D1079D1080D1083D1084 C1747 C1746 R1866
R1253
R1213
U1019
R1272
C1089
C1203 SW1 L1059 D1077D1078D1081D1082 R1777
N1008 L1014
R1872
N1010 R1256 R1252
C1181
R1776
C1184
R1262 R1250
D1030
D1034
L1015
C2088
D1029
D1033
C2089 Q1058
C2084
D1137 R1956 C2087 R1946 U1006 R1212

EXT C1867 C1866
R1983
R1958 D1136 R1948 R1215 Q1003 1.1V
Z1001 C1186 J R1856 R1859 R1862
R1891
R1249
R1888
R1959 R1949 R1736
D1036
D1032
D1091 D1107 D1108 D1109
D1031
D1035
R1096
R1097
Q1009
IN2_DET
Q1016 IN7_DET
R1873
R1455
D1121
C1907
Q1010
R1456 C1916 D1067 D1068D1071D1072 R1857 R1860 R1863
R1435 D1090 R1443
R1448
C1333
Q1015
D1111 D1110 D1120
R1099
D1065 D1066D1069D1070
D1094
C1185
1.HPD
K1003 K1002 C2090 C1905R1967C2091 R1969 IN2 IN3
Q1005 IN4 IN5 IN6
IN7 C
R1869 R1870 R1871
IN1_DETN1001 DDCSDA N1002 DDCSDA IN3_DET N1003 DDCSDA DDCSDAQ1012 Q1011 N1005 DDCSDA IN6_DETN1006 N1007 DDCDATA N1031
N1030
U1043 U1044 R1968 IN2+5V
IN4_DETN1004 DDCCLK
I IN6+5V
G F
2.DDCDATA
IN1
+5V
2.DDCCLK
IN7+5V
D1093
K1000
K1001
2.HPD
DDCSDA
C1338
C1340
IN4 IN5_DET

(A SIDE)
7:THERMALDETB
2:THERMALDETF
6:THERMALDETA
1THERMALDETE
R1000
C1007
C1006
C1003
C1005
C1004
R1675
C1721
C1000
C1001
C1002
R1680
L1058
R1670
C1614
C1613
C2114
C1347
C1722 L1069
C1958L1068
R1353
5:ASODET
R1359
Q1038
3:DCDET3
4:DCDET4
C2100 C2102 C2101 C1720 C2112
C1718 R1352 Q1021 Q1019 Q1029 Q1024 R1358
C2094
C1716
U1065 R1372 C1294
C2130
C1407
C1404
C1405
R1375
C2093
C1291
C1409
C2099
R1342
9:THERMALDETC
R1336
R1570
7:CURRENT_DET
R1485
C1420
L1052
14:FRONT_RLY
C1411C1410
10:DECIN_CR
8:DECIN_CB
8:AMPSIG_DET
C2097
R1487
C1427
C1425
C1423
6:DECIN_Y
4:DECIN_V
2:COMP_SW2
6:COMP_SW1
C1289
R1370
C2116 R2042
C1415
10:RLY_HIB
C2076 13:C/S_RLY
11:H/P_RLY
16:H/PGND
12:SB_RLY
2:VAUXV
C2169
R1341
R1335
C1428
C2098
R1764
9:DGND
7:DGND
5:DGND
3:DGND
R1765
11:DGND
1:DGND
R2020 R2049 R2057
C1715
C1439 C1950
15:H/PR
17:H/PL
U1027 R1571
C2092
1:DGND
3:V_INC
C1441 R2027 R2053
4:V_INB
5:V_INA
C2095 C1925 C1403 C1955 R2028
MX25L12835FMI C1426 C1421 C1434 C2150
R1569
C1413
C1412
C1416
R1580
C1432 C1287 R2032 U1048
C1620 R1565C1418 R1584R1579 C1429 R1572 R1332 R1348 C2133 R2033
C1654 C1848 R1578 C2156
R1980 R1976 C1444 C1435 C2117
R1762
R1582 Q1031 C2131
C1558
C1651 C1422 C1502 R1932

R1979R1978R1977 C2127
R1671
U1023 C2066
C1661
C1719
R1679 R1586 C1960 C1500 C2057
L1037
R1633 R1647 R1655 C2126
C1647
C1663
C2068
C1648
C1659
C1657
C1662
C1652
C1555 C1446
L1049
R1678 R1587 C2124
R1900
R1589 C1424 R1925
R1632
C1564 C2056 C2122

C1664
C2081
C2078
R1903
C2069
Q1040 R2029
C1524 C1519C1522 C1520
C1472C1440
C1442
R1931
R1618
C1482
R1644 R1651 C1458
R1953
R1954
R1955
L1038 C1957 C1501 R1902
C1592 C1460 R1899 C2118
R2037
R1718 C1349 C1714
C1595 C1649
C1528
C1529
MX25L1606EM21 C2060
C1589
C1590
C1593
C1669
R1501 L1066 C1462 C2061 L1089

C1588 C1531 C1532 C1847 U1025
C1476C1471
C1530 C1527 C1667 L1067 C1504 C1464 R1923 C2147
C1653
R1907
C1468
C1591 C1656 C2110
C1658
C1450 C1503
C1650
R1495 C1474 R1598 C1445 R2043

C1660
R1652
C2067
R1921
C1499
R1920
C1559 R1494 C1495
C2079
C1457
C1666
C1478
R1612 C1506 C1475

C1668 R1489 C2065
C1562
R1684
C1615
R1687 C1455
C1451
C1469
C1507
C1508
R1627
C1452
C2083
C2080
C1523 R1711 C1461 C1489 C1956
C2071
C1454
C2077
C1594 C1521 Q1039 C1465
C1505
R1650 C1557 C1525 R1709 R1910
9:DAGND R1918
C2135
C2074
C2075
C1556 C1726 C1481
C1541
R1640
R1595
C1542
R1714
7:CEN+ C2143
R1708
R1616
C1565
R1592
C1563 R1600
C1518 C1515
R1615
C1622
C1636
C1526 R1689 C1477 R1606 C1917

R1611
15:DAGND
12:DAGND
21:DAGND
18:DAGND
C1550
C1553
C1516 R1604
I O
R1688
3:DAGND
R1919
C1582 C1600C1598
C1581 C1597C1599
C1511
R1628 C1512
C1513
G
C1583
22:SBR+
R1613C1487
C1483 C1486
R1610C1485
R1608C1484
C1517
C1627
C1639
R1605
19:SBL+
DAGND
C1618 C1560
C1628
23:SBR-
10:SW+
20:SBL-
8:CEN-
C1642
C1635
C1633
16:SR+
11:SW-
C1632
13:SL+
C2132
C1549
R1694 C1910
17:SR-
14:SL-
C1561
4:FR+
C1480
1:FL+
5:FR-
2:FL-
C1540 R1693 C1640 R1607 R1617
R1643
R1642
C1728
R1609
C1571 U1032
C1959
C1498
C1497
C1496
C1494
C1493
C1492
C1490
C1491
C1488
R1629
R1614
C1552 C1577 C1572 C1630
C1970 C1586 C1579 C1573
C1554C1544 C1671
C1548 C1578 R1712 C1826
C1585 C1570
C1545 C1621 C1643

C1634
C1576
C1537
C1535
C1538
C1536
C1539
U1070 R1829
C1584
C1596 C1601 C1587 C1846
C1855
C1830
L1041 U1020 C2120
C1953
C1952
R1646 C1566 C1629
C1623
C1638
C1644
C1580 R5F5210ABDFP
R1523R1524
C1631
C1641
C1356C1355
R1794
C1637
R1832 R1645 C1625

C1782 R1789 C1783R1796 R1802 C1791
C1626C1624
C1761 C1762 C1788 R1828 C1947
9:DACRTNGND
8:DACRTNGND
C1678 R1806 R1807 C1547 L1042 L1048 D1103
15:VOL_MUTE
C1851 R1470
C1679 R1471 C1712 R1744
13:MICGND
C1760
C1792
C1797
C1787
7:DM920R
R1472 C1946
5:DM920L
L1080
L1081
R1758 C1711
6:DAGND
4:DAGND
2:DAGND
L1039
C1807
R1819
12:VAUXR
C1534
10:VAUXL
C1610R1661
C1609R1660
C1608R1659
C1607R1658
R1634
R1636
R1631
R1630
3:A/D_R
R1473
11:AGND
R1749 R1757
1:A/D_L
C2299 B R1474
L1056
L1054
14:MIC
C2201L1090
C2213L1091
C2216L1092
C2231L1093
C2269 L1096
C2255L1095
C2291 L1098
C2294 L1099
C2281L1097
C2232L1094
C2305 L1101
C2309L1102
C2300L1100
C2298 Q1053 Q1070 Q1071 C1803

Q1054
12MHZ
X1004
L1124 C2296 C2302

C1790
L1111
L1126
L1127
U1066 C2297 R2117 C1832

C1852 C1831 U1064 U1070 R1836
C2307
C2286
C2285
C2284
C2283
C2282
L1114 L1125
R2155R2149
R2161R2153
R2168R2158
R2170R2166
C1781
R2173
R2174
R2175
C1844 C1748 C1793 C1843 C1705

C1766 L1110 C1771 C1802
C1871
C1870
C1796 R1745
C1779
C2337 C1849
C1778
C1764
L1109
R1818
C1750
C1756
C1768
C1189
Q1071
C1674 C1919 C1926 C1971 C1972 C1967 U1001 C1176
U1056
C1676 C1177
6:PRE_Z2_MUTE
R1190 C1191
5:TU_GPIO2_INT
1:TU_SCLK/SCL
2:TU_SDIO/SDA
C1673 R1771
DGND
DGND
R1194 R1020 D1105

D5V
C1744
R2169
R2167
R2160
R2154
C1677 MAIN_PWR R1084 R1768 C1724 C1190

L1103
L1106
7:PRE_MUTE
R1197 R2138 R1022 C1872
4TU_RST/ST
R1087 C1899
L1070 C1723
DGND C1731 R1770

R1476
C1188
D5V
R1201
R1475
R1198 R1090 R1024 C1187
3:TU_SEN
DGND R1094 R1025 C1192
U1067 C1732
C1730
C1733
R1502
R1497
R1492
R1491
R1488
R1469
D5.2V R1195 U1067
C1869
R1091
C2047C1995C1993 C2045
R1029
C1924
Q1074
R1457
R1458
R1459
R1460
R1461
R1462
R1088
L1071
D5.2V R1185 R1191 U1004 R1027 C1868 C1875

R1085
Q1017 U1057 C1725 L1073 C1874 R1387
R1868
C2028
C1987
C2030
C1981
C1982
C2033
C2035
C1984
C1976 C2038
C2046
C1088 R1393
C1033 R1006R1010
C1853 C1734 L1072
R1411
R2151R2132 C2287
C1324
C2203
C2205
C2204
C2025 C2303
C1024R1012R1011
C1015
C1012
R2123 C2277
R1499
B
R1493
R1490
C1973 C2304 C2288 C2278 C2276 R1366 R1422 R1405

C1093
C2026 R1128 C1014

C1157 R1367 R1423
L1082
C1989 R1402
R1227
C1975 R1130 C2280 R1053 C1010
C2289 C1076 R1037 R1394
C1142
C1130
C1127
C1095
C1144
C1146
C1149
C1156
C1154
R1132 R1408
C1097
C1147
C1159
C1073
C1071
C1062
R1368 C1321
L1084
C1145
R2172
C1059
C1047
C1044
C1063
C1013
R1786 R1808
C1064
C1066
C2290
C1011
L1008 R1052 C1074 C1061 R1230 R1410

C1148
C1098 R1133 L1001 C1753C1745 R1379

C1096
C1094
R2156 R1425
R2124
R1055
C1065
C2279
C2274
C2275
R1137 C1322
C2237
C1876
C1974 R1057 R1804 R1426
C1171
R1214
C2054 C1120 R1135 R1438 R1392
C1034
C1978 C2002
C2295 R1058 C1037

C2004 C1996
C2041 R1139 C2339 R2150 L1003 R1468

C1777
C1763
C1776
R1466
R1391
C1759
C1168 R1051C1085 U1068 U1016

L1079
L1078
C1994 C2053 C1167 C2338 L1016 C1084 C1025 C1035 R1228

C1863 C1124C1150 C1108 R2143 C1039 R1229 R1453
C2051
C1912
C1990
C1335
C2003 C1861 C1166 R1119 R2144 C1083 C1780 L1107
C1125
C1151
C
C2218C2234
L1013
C2223C2235
C2220C2236
L1019 R1118 R2142 C1836

R1059
R1064R1073
R1065R1074
C1110
C1106
C1979
R2126 L1010
R2146
R2163 C1827 C1765 L1108 R1436
R1884
C1180
Q1064
R2147 A R1264 R1441 U1017
C1860
C2217
2005 C2006 C1835

R1172 R1181
R1173 R1182
L1083
C1298
C1334 C1323
C2340
R2159
C1122 C1165
C1105 R1774 R1781 R1234

C1107
C1986C1983
C1116
C1862C
C1829 R1442 R1395

C1980 C1104 C1740 C1736
C1117
C2000
C1183
C1118 C1965
R1465
C2207
C1135
C2210
C2212
R1780
C2010
R2097 C1864 Q1065 Q1032 R1791R1790

C2001
R2162
C1121
C1163C1164
C1136
R1407
R1406
R1404
R1403
C1741
C1742
C1067 A
C1739
C1137 C1102 C1056 U1069

C1735
R2131 R1386
C2219
C2229
C2227
C2228
C2193
L1075
L1074
R1385
C1139
U1069
C1040 C1082
C1042
C1057
C1999 C1873
C1027
C1133 C1103
C1706
L1006
C1023
C1699
R2171
C2341
C1909
C1081
C1080C1041
L1011 R2140 L1005

C1109
R1397
C1101
L1012 C2190
R1951
L1086 C2197 C2199R2141 C1903 R1401 R1400
C1126
C1091
C1140 C1068
C2195
C2194
C2198
C2192
C1737 L1077 R1950 R1421

C2196 C2325C2191
C1966
L1004 C1022
R1192 C1743 L1076
C2268 C2265
C2266 C2263
C2267 C2258
C1100 C1043 C1050 R1947

R1992 C1169 C1021 R1952
R1432
R1433
R1434
R1266
C2015
R1451
Q1036 R1450Q1037 C1342
C1330
C1332
R1801 R1752 L1007 R1086 C1051
R1957
R1175
L1000 C1009
C2011 C1857 Q1006 R1246 R1964 C1900

R1811 R1760 R1174 C1020C1049
R1083
C1029
R1739
R1960 Q1035
R1263
C1695
R1740
R1269
R1735
C2012
L1087 C1833 C1700 C1092
C1902
C1767 R1176 C1048C1019
L1002
C1854 R1962
C2034
C2036
C2013 R1761 C1114 C1030 C2085

C2032
C2017
C2020
R1812 L1061 U1042

C1026
C2248C2242
C2022
C1018
C2031
R1189
C1158
C2271 C2292
C2273 C2293
C2016
C2024
C2027
C2029
C1842 C1031
C2021
C2023
C1113 L1009
C1008
C2014 R2127 L1060 C1859 C2086

C2241C2243 C2254
R1896R1890
R1895R1889
C2312
C1075
C1054
C1072
C1069
C1052
C1055
C1053
C1060
C1058
Q1007 Q1008 C1046 C1914

R1033
C1988 C2040 R1261

C1099
C1901
C2246
C2252
C2240
C2244
C1998 C1112 C1017

R1141
C1119
C1134
C1155
C1152
C1138
C1132
C1143
C1131
C1141
C1162 C1079 R1961

C1111
C2007 C2037 C1028

C2272
C1129 C2253 R1260

C1016
C1036 R1966
C1038
C1985 C1991 C1123 C2208 C2251 C1045 R1259

C1694
C1692
R1077
R1240
C2008 L1085 C1128

C2211 C2249 R1078 C1175
C1977
C2018
C1992
C2039 C2009
L1088
C2048
Q1057 Q1014 Q1013 C2209 C2250 C C2221 R1079 C1837 R1211 R1965 R1963
C1997 C2225
C2049L1115
Q1004
C2247 C2224 C1178

C2019 C2050C2311
C2260
C2200 C2262
C2264
C2256
C2257
C2259
C2261
C2245 C2222 U1010 Q1001 Q1000

D1139
C2106 C2226
D1140 C2230 Q1002 MX25L25635FMI C1828
21:ZVOL_LATCH
R2118 R2121 C2327
14:REMOTE3.3V
23:ZVOL_DATA
17:FRONT_IRIN
22:ZVOL_CLK
19:KILLIR_MZ
10:VOL_DATA
15:MUTE3.3V
9:VOL_CLK
18:RC_OUT
13:232OMI
12:232IMO
2:DA_+5V
1:DA_+5V
16:RC_IN
11:TRG1
6:A_+7V
5:A_+7V
7:DGND
8:M3.3V
4:A_-7V
3:A_-7V
20:D5V
(B SIDE)
CX870JUNCTION test point USB test point

BKT7000 CN4402
SW7000
11. GND
CX870 JUNCTION PCB 10. +5V
GND
R7029
R7031
R7028
R7030
9. BT_TX
GND
7020-07500-020-0S
J4504
8. GND
7. BT_RX +DATA
6. NET3.3V -DATA
5. BT_PRIORITY VBUS
4. BT_LDO_ON
CLAMP7000
IN ICT OP ADJ FI 3. WLAN_ACTIVE CP4406
2. BT_EINT
CN4402
1. BT_ACTIVE
5.2V
N7000
GND
5.2V
CP4406
C7016
GND
N7005
Pb N7000
J4511
C7007
C7000
R7004
JACK4400
U7000
U7000
C4471 G4402
C7005
BD82065FVJ-E2
N7002
N7001
120PIN PLUGC7015
VBUS
C7009
2 1 DATA-
L7002
R7005
Pb
R7053
R7038
DATA+
R7009 GND
R7010 R7011 GND
R7012
R7013
R7015 N7005
R7027
C7013
R7014
(A SIDE)
BKT7001
C7014
R7047
R7052
R7046
R7020 R7051
R7045
R7050
R7023 R7044
R7049
R7043
R7048
120 119
(A SIDE)
Bluetooth test point
IC6000 CP6001
Pb
X6000
R6001
32.768KHZ CP6001
R6000
C6000
IC6000
TC7SGU04FU
C6004 C6001
C6005
R6006 R6005
C6002
L6000
C6007
L6002
C6003
iBT-06-02S
C6006
R6004
R6007 L6001
U6001
R6009
R6010
R6011
BD00HA3MEFJ
R6008
U6000 IBT-06-02
BLUETOOTH [MP]
(A SIDE)
94

6. SMPS
DC 5V is not output.
YES Replace the IC4140 (TOP258MG) and

Is IC4140 (TOP258MG) damaged?
D4142 / D4143 / D4144 / D4145.
NO
YES YES
Are there the damage in D4142 /
Has a fuse (F4140) broken? Replace the damaged part(s).
D4143 / D4144 / D4145 / IC4140?
NO
YES
Are there any short circuits caused by Repair the short circuited area(s) by the
the soldering of the PCB? soldering of the PCB.
NO
YES YES
Are any parts damaged? Check the damage of each part. Replace the damaged part(s).
95

Operation waveform for each part
A B
After primary side rectification Primary drain
OPTION (Caution: High voltage, electric shock) (Caution: High voltage, electric shock)
OPTION
OPTION
C
After secondary rectifications
OPTION
T4140
●
OPTION ● ●
TR4140
IC4140
OPTION
SMPS unit
(Unloaded) A B C
Set A B C
96

CLOCK FLOW & WAVE FORM IN DIGITAL BLOCK
WAVE FORM U1001
DIR input CH0ASD0 36 2

TC74VHC244
18 TX64FS 36 123 CH0ASD0
CH0ASD1 35 4 16 TXFS 35 122 CH0ASD1
IC1000 CH0ASD2 34 6 14 TXI2S0 34 121 CH0ASD2 IC1039
MN8647781 CH0ASD3 MN8647781
1
33 8 12
HDMI Rx HDMI Tx
CH0ALRCLK 32 17 3
CH0ABCLK 31 15 5
CH1:D-DATA
CH0AMCLK 136 13 7 TXSPDIF 13 33 CH0ASD3
U1041
5M80ZT100C5N
Audio PLD
U1004
CH0ASD0 36 2
TC74VHC244
18 83 RXI2S0 ③
CH0ASD1 35 4 16 82 RXI2S1
IC1003 CH0ASD2 34 6 14 81 RXI2S2
MN8647781 CH0ASD3 33 8 12 78 RXI2S3
HDMI Rx
CH0ALRCLK 32 17 3 77 RXFS
CH0ABCLK 31 15 5 76 RX64FS
DAC256FS 26 14
SCKI
CH0AMCLK 136 13 7 75 RXMCK 33 7
DAC64FS BCK
RXSPDIF 73 RXSPDIF
34 6
DACFS LRCK
U1008
CX870 U1048
NETWORK PCM1690
PROCESSOR DAC
DIR output
30
DACDATAF 8
DIN1
26
NET/USB_MCK 68 NET/USB_MCK 29
DACDATAC 9
DIN2
NET/USB_BCK 30 67 NET/USB_BCK
28
28
DACDATAS 10
DIN3
NET/USB_LRCK 66 NET/USB_LRCK
27
DACDATASB 11
DIN4
2 NET/USB_DATAF/FR 34 64 NET/USB_DATAF/FR
CH1: DATA
97
DATAF
① DATAC 98
99
DATAS
DATASB 100
14
DSP1OUT64FS
CH2: fs 15
DSP1OUTFS
32
OPTICAL1 RX3 RX6 29 41
DIRARC
3 75 98
DSP1IN64FS DSP1IN64FS DSP1OUT64fs
33
OPTICAL2 RX2 RX5 30 41
DIRRXSPDIF
4 97 99
DSP1INFS DSP1INFS DSP1OUTfs
COAXIAL2 35
RX1 U1040
CH3: 64fs
Detail A
8 86
PCM9211 DSP1INF/FL 100 DSP1INF/FL DATAF
37
COAXIAL1 RX0 MPIO_A1 4 54
SLRCK1
DIR/AD
3 55
103 DSP1INLR DATAC 94
R1901
MPIO_A2 SBCK1 7 95 73
DSP1INCSW/SW DSP1CSW/SW DATAS
17 47
DOUT DATADIR1
DSP1INS/C 6 74
DSP1INS/C DATASB 88
18 44
LRCK FSDIR1
DSP1INSB/SL 5 101 DSP1INSB/SL U1024
19 43
BCK 64FSDIR1
DSP1IN-/FR 16 77
DSP1IN-/FR ADSP21487KSWZ3B
IC4200 SCKO 20 42
256FSDIR1 DSP
54
ANALOG Lch R2A15218FP A/D_L 47
VINL DSP1IN-/SW 18 55
DSP1IN-/SW
ANALOG Rch ANALOG VOL A/D_R 55 48
VINR
DAC input &SW
②
U1040
3 PCM9211
DIRO1
R1914
R1915
R1916
CH1: DATA
11 HDMI PCB 7020-07498-020-0S [MP]

N1018
N1033
17
C2174 N1019 CLAMP1000
CLAMP1001
R2074
C2181
C2179
C2178
R1356
R1374
U1050 C1293 R1943 R1945
Pb
C2123 C1295 R1369C1292 R1371 U1045
R1361
R1355
R1360
R1354
R1350
R1357
Q1023
C2160C2161
R2078 C2125 R1376 C1288R1373 C1290 R1944 5M80ZT100C5N

R2066 C2128
R1351
I O
DSP1OUT64FS
N1032
R2068
C2175
C2177
DSP1IN F_FL
DSP1IN64FS
DSP1OUTFS
R1334
R1938 R1333
DSP1INFS
N1014
R1567
R1574
R1672
R1563
R1564
ICT OP ADJ FI
C1402
C1417
C1419
C1406
C1408
C1414
C1431
IN
R1340
R2067 D1138 C1908 N1000 R1001 DE R1673 R1674

U1052 C1433 PCK R1676
R1343
R1999 C2168 C2176 Q1025 Q1028Q1022 Q1020 R1583 R1682R1677

R1937
R1936
R1935
R1975
R1929
R2002 R1346 R1585 R1681
F/HDMI
C1911
R1339
R1974
R1338R1337
C2137 C1286 C1922 C1443 R1970

R1940
R1939
C1920 C1913
R2061
C2096
R1934
C2172
R2010 C1949 C1449 DA1.1V

R1930
R1942
R1941
R1971
R1349
R1347
VSYNC
N1028
C2115 R1573
R1938
R1937
R1936
R1935
C1672
R1716
R2013
R1715
C1619
R1972
Detail B
R1929
R1575R1581
C1665
C2113 HSYNC
R1933
C2146 Q1030 R1973

C2111
C1968
R2017 N1027 R1577

R2021 C2149 C2136 C2058 C2059 Q1018
A B
CH2: fs
C2129
R1981
R1982
C1436
R1639
R1635
R1685
R1686
C1646C1670
C1645
R1338R1337
C2151
R1576
C2134
K4T51163QJL1053
R1928 C1438
C2119 R1901 R1927 C1447
M
H
23
D
C
B
F
E
C2121 R1763 R1562R1824 R1704 PCK R1641

R1926 R1591 R1766C1456R1821 R1690
R1924 VSYNC
R1940
R1939
123
C2157 R2034 C2154 C1717 R1705 C1514 R1691 AVSDA

HSYNC
U1029
C1437 R1767 C1459 R1720 C1617

R1702 R1701
R2038 C2164 AVSCL

C2062 R1566 R1568 DE
R1593 C1463R1820 R1722 R1683
R1934
N1035
R2044 C2165 R1922 R1699 SPI_MO

C1448 C1466R1732
AC
AB
AA
R1930
R1942
R1941
W
C2162 R2047
U
R1724
R
P
N
K
H
G
D
C
B
Y
V
F
E
A
T
SPI_CS
789
R2058 C2159 R1917 C1453 R1726 1 SPI_MI

R1594 C1473 R1730 R1700 2
R2062 R1597 3 C1616
C2070 X1008 24.576MHZ
R1906 Q1072 R1728 4

C2171 R1669
C2082
R1703 5
R2069 R1713 6 R1668
C1915
C1906
C1904
R1908 R1599 BKT1001

C2064 C2063
7
R1905 R1904
R1667
R1822
R2072
DAC256FS
R1823
8
C2180 C2163 U1040 R1710 9 TX_MISO_SF
Q1066 R1603 10 ADV8003_IN2
R2082 PCM9211 C1773 C1430
C1784
R1933
ADV8003_IN1
R1914
C2072 11
R1915
R1916
Q1030
R2085 C1479 R1707 ADV8003_IN0
X100627MHZ
C1611 C1612
U1028 K4T51163QJ
C2185 C2073 Q1067 ADV8003_RST

R1731
U1041 R1596 R1706

N1034
R1588
R1662
TX_TEST1
L1029 R1912 5M80ZT100C5N

R1625
17
Q1049 Q1048 R1590 R1620
C1655
N1015 C1315 C1318 R1909 C1948 Q1073 18

19
R1911 C1467
R1797
M
R
P
N
K
H
G
D
C
B
F
E
A
L
J
R1879 D1124
R1913 R1795 C1470 R1621R1622R1623 R1624 R1697 20

21 D
D1073
N1017 R1719 22
123
C1945
C1944
R1698 C
U1024 R1721 23
L1040 R1178 R1184
2 40
CH3: 64fs
ADSP21487 R1619 R1626 D1074 R1183
R1875 R1877 R1892
D1122 D1123 D1135
R1878
C1567
C1969 C1921
C1509 C1510 R1692 C1575 U1026 C1170 R1177
DACDATAAF
R1723 C1568 L1051 R1187R1180 D1076
R1258 X1005 R1725 ADV8003 R1188R1179D1075
15
789
L1047
C1569
L1044
L1045
R1076 R1727
CY 920 MODULE
C1574
R1695
R1254 21.875MHZ
R1874 R1876
L1046
R1885 R1886
R1479
D1126 D1125
1 39 R1070 R1075 R1729 L1043 E

R1482
R1481
C1751
R1484
H C1087D1025 C1543
R1363
R1522
R1365
Q1068 C1327 R1151

R1787
R1814
R1815
R1997
C1775
D1026R1069 R1696
R1746
R1750
R1147 R1150
L1136
C1713
R1081R1072D1028 C1551
N1029
C1350
C1351
R1998
R1928
R1504
R1505
R1506
R1717 C1153 D1061

R1742
C1708
D1104
R1082 R1071D1027 L1050 C1918 D1062 R1146

R1831
R1827
C1328
C1789
R1830
R1799
R1793
R1810
C1749
R1043 R1152 R1149 D1064

C1314 C1319
C1316 C1317
R1825
C1313 C1320
R1816 R1153 R1148D1063

R1638
R1637
D1089
R1039 R1042
C1357
R1519
R1521
R1520
R1518
R1517
R1545
R1544
R1817 U1033 R1513 R1514R1515 I C1070D1012 CLAMP1002 C1546

L1030
L1028
C1352
C1680
L1027
D1013 R1038 DV1.8V

Q1069
C1951
C1954
R1477
3.3V
C1353
R1927
C1727
C1681
R1364
R1345
R1362
R1344
C1840
C1297 C1296 R1044R1041D1015

C1941
R1741
C1923
C1354
R1510 R1045R1040D1014 R1826 C1942

R1512
R1378 R1377 R1516 C1675
DAC64FS
Q1027 Q1026 U1007 C1346 C1940
L1055
Q1043
R1480
2 1 R1755
C1709 R1751
R1782
2 1
R1478
R1754
C1693
Q1059 Q1052
R1926
R1743
R1748
C1710
U1008
MAC ADDRESS LABEL

R1483
N1013 R1507
Q1060 R1503 J R1018 Q1063 C1707
G
R1756
R1380 R1779 R1778 R1509 R1014R1017 C1839

C2336
R1464 R1508 C1032D1000 Q1055 N1036
R1924
R1783
R1381 C1845
C1752
I O U1030 N1025 D1001 R1013 Q1062 Q1056

REQSOMI R1463 R1449
7
R1382 Q1041 R2165

R1773
R1769
R1772
N1021
C1729
R1383 C1698 C2104

R2148
R2152
R2157
R2176
R2177
R2178
R2179
R2180
C2308 R2120
C1326
R1412
R1414
R1418
C1331
C2301 R2119
R2129
R2125
R2164
R2135
R2139
NET1.2V C2318
CH4: 256fs
R1396
R1398
R1399
DACFS
R1867
R1865
R1864
R1861
R1858
R1855
ACKSIMO
R1126
CLKSIMO
R1216
R1217
R1031
R1271
SIMO
SOMI
DGND R1270 C2214 R1122 R1125

R1145
R1415 C2215 F C1115 D1049

D1002 R1015 R1021
D1003 R1016 R1019
R1427 R1233 R1833 C2202 D1050 R1121

R1127 R1124D1052 U1003 RX3SCL
AC
R1416 R1235 U1000 R2089 R2094C2189
C2320
AB
R1922
R1440R1417 R1236 MN864778 R2091 R2096C2188
AA R1129 R1123D1051 MN864778 RX3SDA
N1016 R1439 R2090 R2095C2187
Y
U1039
C1307 R1220 R2092 R2093C2206
W
C1865 C1684 MN864778
R1803
R1813
R1792
HAINT0 R1106
C1774
3.3V
V
R1120
C1302 R1898
R1117
N1009 C2319 R1102 R1105 R1161 C1943

U
R1734R1733
R1237 R2134 G C1090D1037 R1881 R1850

X1003 12MHZ
T
C1305 U1005R1207 R1238
C2321 R1160 Q1051 Q1050 C1703 C1769 R1882 R1851
D1038 R1101
C1758
C1772
C1704
R2122
C1304 R1163
R1437
C1336C1337
R1241 NET1.8V C2323 R1107R1104D1040 C1757 R1883 R1852

R1165 C1701
1.1V
C1306 R1242 C2322 R1108R1103D1039 R1166 C1770 R1894

C1303
C2055C2052
L1122 C1858 R1897 R1893
R1221
L1065
L1064
R1209 R1159
64FSDIR1
R1834 C1179 R1162
C1685
R1222
D1096
R1917
C1301 R1498 X1009 J
R2137
R1208 C1172
R1984
R1243
R1987
R1986
R1985
L1116
L1119
L1118
L1117
C1348 R1496
H
C1308 R1244 R1224 27MHZ
R1390 R1210
G
R1223 R1500 R1486 R1993 U1055 C1182
C1755
R1788
F
C1173 R1063
27MHZ
R1784
R1247R1785
C1160
C1697
R1225
R1245C1738
C1161
R1835 R1775
ADV7850
R1759
1.1V
E
X1007
R2133 HAINT1
R1753
R1389 C1174 R1226 C1078

D
D1114 D1118
23
R1171
D1115 D1119
NET2.5V
NET1.9V
R1388
C
C1309 R2136 B C2103
R1994 D1112 D1116
D1005D1007
D1009D1011
C1300
D1008D1010
27MHZ
D1004D1006
L1123 L1112
L1113
A
U1018 D1113 D1117
X1000
C1311 A
27MHZ
X1001
C1086
U1063
R1798R1809
CH0AMCLK
R1068R1060
R1066R1061
R1067R1062
R1080
R5F56108VNFP C1312
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
A BKT1000 C1834
R1454 R1800 HPD_P1 HSDA U1062 R1853
C1702
HPD_P2
C1785
R1255
L1121
R1989
R1265
R1990
L1120
R1991
R1988
R1428
R1384 R1267 R1854
R1906
R1467
C1077
R1431
C1339
C1325
R1805
D1106
C1195 C1198 C1310 C1344 HSCL R1206

C1691 NIRQA0
L1017 L1018 C1299 C1345 C1690 C1754 NIRQA1
R1747
C1688 C1687 R1186 C1696

C1686
R1095 U1061 D1134

D1092
FSDIR1
D1085 D1086D1087 D1088 R1268 C1202
C1689 D1129D1130D1133 CH0ASD1
D1044D1042
D1048D1046
N1011
D1043D1041
D1047D1045
R1737 R1738 R1170 R1204 C1838

L1063 D1127 D1128 D1131 D1132 CH0ASD0
R1248 C1201 R1169
R1452
C1341
C1343
R1199 L1105
C1841
D1021D1023
D1017D1019
C2105 64 63 U1002
D1020D1022
D1016D1018
64 63 R1168 L1062
R1880 C2043C2042
C1850

D1058 D1060
D1095
D1054D1056
C2044
INT
R1887
D1053D1055
D1057D1059
C1204 L1057 D1079D1080D1083D1084 C1747 C1746 R1866

R1253
R1213
U1019
R1272

C1089
C1203 SW1 L1059 D1077D1078D1081D1082 R1777

N1008 L1014
R1872
N1010 R1256 R1252

C1181
R1776
C1184
R1262 R1250
D1030
D1034
L1015
C2088
D1029
D1033
R1908
C2089 Q1058
C2084
D1137 R1956 C2087 R1946 U1006 R1212

EXT C1867 C1866
R1983
R1958 D1136 R1948 R1215 Q1003 1.1V

Z1001 C1186 J R1856 R1859 R1862
R1891
R1249
R1888
R1959 R1949 R1736

D1036
D1032
D1091 D1107 D1108 D1109

D1031
D1035
R1096
R1097
Q1009
IN2_DET
Q1016 IN7_DET
R1873
R1455
D1121
C1907
Q1010
R1456 C1916 D1067 D1068D1071D1072 R1857 R1860 R1863

R1435 D1090 R1443
R1448
C1333
Q1015
D1111 D1110 D1120

R1099
D1065 D1066D1069D1070
D1094
C1185
1.HPD
K1003 K1002 C2090 C1905R1967C2091 R1969 IN2 IN3

Q1005 IN4 IN5 IN6
IN7 C
R1869 R1870 R1871
N1007
DATADIR1
R1968 IN1_DETN1001 DDCSDA N1002 DDCSDA IN3_DET N1003 DDCSDA IN4_DETN1004 DDCSDAQ1012 Q1011 N1005 DDCSDA IN6_DETN1006 DDCDATA N1031
N1030
U1043 U1044 IN2+5V
DDCCLK
I IN6+5V
G F
2.DDCDATA
IN1
+5V
2.DDCCLK
IN7+5V
PCM9211
D1093
K1000
K1001
2.HPD
DDCSDA
C1338
C1340
IN4 IN5_DET
97

LEVEL DIAGRAM
AVR-S900/X2100W
LEVEL DIAGRAM
FRONT ch
R2A15218FP
ANALOG H/POUT
LINE IN ＋ SPEAKER
GAIN
＋
PCM1690
PCM9211 ＋＋
PLD D/A
A/D －－
DSP
ZONE2
(AVRX2100 ONLY)
+30dB
SP OUT
4.48Vrms/8Ω
0dBFS MAX SIGNAL LEVEL
+20dB +20dB
1.41Vrms PCM1690 DOLBY LIMIT LEVEL (ALLch-3dBFS)
PCM9211 0dBFS
+29dB
0dBFS=1.06Vrms
-35dB
+10dB +10dB
-10dBFS
-10dBFS
-20dBFS(DIG.IN)
LINE IN
200mV 0dB -26.5dBFS(A/D IN) 0dB
-2.0dB
-20dBFS +3dB -2+6.5=+4.5dB
-12dB -20dBFS
H/POUT
-2+12=10.0dB 79.6mVrms
A/D IN
-10dB -10dB
50mVrms
-2+12+6.5=16.5dB
(-26.5dBFS) -30dBFS
+3dB
-30dBFS
SW NO
-32dBFS(DIG.IN)
-20dB -38.5dBFS(A/D IN) -20dB
GAIN setting of MASTER VOL 00dB
-40dBFS ･SW:YES (DIGITAL) -2.0dB = -2.0dB
･SW:YES (ANALOG) -2.0dB 6.5dB = +4.5dB
-40dBFS
･SW:NONE (DIGITAL) -2.0dB +12dB = +10.0dB
･SW:NONE (ANALOG) -2.0dB +12dB +6.5dB = +16.5dB
-30dB (1) (2) (3) -30dB
(1):Basic OFFSET of VOL=0dB
(2):OFFSET of SW NON
(3):OFFSET of the AD input
-40dB -40dB
98

AVR-S900/X2100W
LEVEL DIAGRAM
CENTER ch
R2A15218FP
＋ SPEAKER
GAIN
PCM1690
＋＋
PLD D/A (OTHER AVR)
－－
MUTE PRE OUT
DSP
EXT IN
(OTHER AVR)
+30dB
SP OUT
4.48Vrms/8Ω
0dBFS MAX SIGNAL LEVEL
+20dB 1.41Vrms +20dB
DOLBY LIMIT LEVEL (ALLch-3dBFS)
0dBFS
+29dB
+10dB +10dB
-10dBFS
-20dBFS(DIG.IN)
-2dB
EXT IN PCM or DD Config1
200mV 0dB -26.5dBFS(A/D IN) 0dB
PREOUT
-20dBFS +3dB 159mVrms
-2+6.5=4.5dB
-26.5dBFS(DIG.IN)
-10dB -10dB
DD Config2
-30dBFS
-20dB -20dB
-40dBFS
-30dB -30dB
-40dB -40dB
99

AVR-S900/X2100W
LEVEL DIAGRAM
SUBWOOFER ch
R2A15218FP
MUTE PRE OUT
GAIN
PCM1690
＋＋
PLD D/A
－－
DSP
+30dB
MAX SIGNAL LEVEL
Config1 DOLBY LIMIT LEVEL (ALLch-3dBFS)

0dBFS
0dBFS
+10dB +10dB
-10dBFS
PREOUT
317mVrms
200mV 0dB 0dB

PREOUT
-20dBFS 159mVrms
-2+(20-6)=12dB
INPUT : -20dBFS(DIG.IN) PCM -34dBFS(PCM.IN)
-10dB -10dB
200mV(A/D IN) -40.5dBFS(A/D IN)
-30dBFS
INPUT:-30dBFS DD LFE -40dBFS(DIG.IN)

-20dB -20dB
DD Config1
+9.5dB
-40dBFS
-30dB -30dB
-50dBFS
-40dB -40dB
100

AVR-S900/X2100W
LEVEL DIAGRAM
SURROUND ch
R2A15218FP
＋ SPEAKER
GAIN
PCM1690
＋＋
PLD D/A
－－
DSP
+30dB
MAX SIGNAL LEVE SP OUT

4.48Vrms/8Ω
0dBFS
0dBFS
Config2 DOLBY LIMIT LEVEL 1.41Vrms(ALLch-3dBFS) +29dB
+10dB +10dB
-10dBFS
-23dBFS(DIG.IN)
PCM or DD Config1 -2dB
200mV 0dB -29dBFS(A/D IN) 0dB
-20dBFS +6dB -2+6=4dB

-2+6.5=4.5dB
-29.5dBFS(DIG.IN)
-10dB -10dB
DD Config2
-30dBFS
-20dB -20dB
-40dBFS
-30dB -30dB
-40dB -40dB
101

AVR-S900/X2100W
LEVEL DIAGRAM
SURR.BACK ch
R2A15218FP
＋ SPEAKER
GAIN
PCM1690
＋＋
PLD D/A
－－
DSP
+30dB
SP OUT
NON CLICP MAX SIGNAL LEVEL 4.0Vrms
4.48Vrms/8Ω
SP OUT(D/A OUT)
0dBFS
1.41Vrms DOLBY LIMIT LEVEL 1.41Vrms(ALLch-3dBFS)
+20dB +20dB
0dBFS
+26dB
+10dB +10dB
-10dBFS
Config2 DOLBY LIMIT LEVEL 1.41Vrms(ALLch-3dBFS)
200mV 0dB 0dB

INPUT : 200mV(A/D IN) -20dBFS
Mch STEREO -2+3+6=+7dB
-26dBFS(DIG.IN)
DD EX Config1 +3dB -2+3=1dB
-2+6.5+3=7.5dB
-10dB INPUT : -23dBFS(DIG.IN) D.D -29dBFS(A/D IN) -10dB
-30dBFS
-32.5dBFS(DIG.IN)
DD EX Config2
-20dB -20dB
-40dBFS
-30dB -30dB
-40dB -40dB
102

AVR-S900/X2100W
LEVEL DIAGRAM
ZONE2
R2A15218FP
from
F-ch
from
TO DA SB-ch ＋ SPEAKER
LINE IN ＋
MAIN
NET/USB DAC
D/A
ZONE2
(AVRX2100 ONLY)
+30dB
SP OUT
0dBFS
2.0Vrms PCM5100 MAX SIGNAL LEVEL 2.00Vrms
+20dB +20dB
0dBFS
+10dB -10dBFS +10dB
-20dBFS(DIG.IN)
-2.0dB
LINE IN
200mV 0dB 0dB
-20dBFS PREOUT
-10dB -10dB
-30dBFS
-20dB -20dB
-40dBFS
-30dB -30dB
-40dB -40dB
103

BLOCK DIAGRAM
AVR_S900 / X2100 / OTHER AVR1 GND DIAGRAM
AC CORD
AUDIO IN B'D
TU_PACK
SPK_RLY_GND
HDMI B'D
CX870
VOL_IC
ADV8003-8B
MAIN_CPU
SUB_CPU
HDMI RX
ADV7850
HDMI TX
CODEC
V_PLD
A_PLD
DSP
DIR
D_GND D_GND
D_GND
HDAM B'D
FRONT R GND
FRONT L GND
SPK_RLY_GND
SBR GND
SBL GND
SR GND
SL GND
C GND
V_GND
SMPS_S3
H/P GND H/P GND

PRE GND
HIGH GND
SMPS B'D
D_GND
F_CNT_B'D
VIDEO B'D
PRE_OUT B'D(OTHER AVR1 ONLY)
RET_GND
AMP +B S1 SPK_RLY_GND SPK_RLY_GND
RET_GND RET_GND
SPK B'D
H/P GND
D_GND
AGND
VIDEO AUDIO
7CH AMP B'D
D_GND
H/P GND
AGND
VOLUME B'D
FUNCTION B'D FRONT B'D
D_GND D_GND
USB B'D
V.AUX (OTHER AVR1 ONLY)

MIC F_HDMI B'D
CHASSIS
HP B'D
104

POWER DIAGRAM
AVR_S900 / X2100 / OTHER AVR1 VCC DIAGRAM
S1(AMP +B)
AC OUTLET
S2(+8V,-8V)
OTHER AVR1 ONLY
MAIN TRANS
AC CORD
OTHER AVR1 ONLY
NET3.3V(CX870/MFI341S2164)
NET1.2V(CX870)
MAIN PWR ON
NET1.8V(CX870:OPEN)
NET1.9V(CX870)
105

WIRING DIAGRAM
AVR_S900 / X2100 / OTHER AVR1 WIRE DIAGRAM
HDMI B'D
TUNER PACK
AUDIO IN B'D
CX870
MODULE
870 JUNCTION B'D

SPK B'D
HDAM B'D
SMPS B'D
FRONT CNT B'D

VIDEO B'D
PRE_OUT B'D (OTHER AVR1 ONLY)
OTHER AVR1 ONLY USE
7CH AMP B'D
40P
VOLUME B'D
FRONT B'D
SELECT B'D
USB B'D
V.AUX (OTHER AVR1 ONLY)
H/P B'D MIC 23P

CHASSIS
106

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
PRINTED WIRING BOARDS

Lead-free Solder
A When soldering, use the Lead-free Solder (Sn-Ag-Cu). A
HDMI (A SIDE) FRONT HDMI (A SIDE) FRONT HDMI (B SIDE)

11 HDMI PCB 7020-07498-020-0S [MP]
N1018
N1033
17
C2174 N1019 CLAMP1000
CLAMP1001
R2074
C2181
C2179
C2178
R1356
R1374
U1050 C1293 R1943 R1945
Pb
C2123 C1295 R1369C1292 R1371 U1045
R1361
R1355
R1360
R1354
R1350
R1357
Q1023
C2160C2161
C2125 C1288R1373 C1290

B B
R2078 R1376 R1944 5M80ZT100C5N
R2066 C2128 D1102
R1351
I O
DSP1OUT64FS
N1032
R2068
C2175
C2177
D1101
G
DSP1IN F_FL
DSP1IN64FS
DSP1OUTFS
R1334
R1938 R1333
DSP1INFS
N1014
R1567
R1574
R1672
R1563
R1564
ICT OP ADJ FI
C1402
C1417
C1419
C1398
C1406
C1408
C1414
C1431
IN
R1340
R2067 D1138 C1908 N1000 R1001 DE R1673 R1674 N1026 R1558

U1052 C1433 PCK R1676 C1387 C1390
R1343
R1999 Q1028Q1022 Q1020 R1583 R1549
R1546
C2168 C2176 Q1025 R1682R1677 U1022 C1394
C1397
Q1046 Q1047
R1937
R1936
R1935
R1975
R1929
R2002 R1346 R1585 R1681 R1547 D1100
F/HDMI
C1911 AD8195
R1339
R1974
R1338R1337
C1922 R1552 C1392
C1382
C1286
C1381
C1383
C1384
C1380
C2137 C1443 R1970
R1940
R1939
C1913
C1399
C1920 R1548
R2061
C2096
R1934
C2172
R2010 C1949 C1449 DA1.1V C1393

R1930
R1942
R1941
R1971 R1551
R1349
R1347
VSYNC
N1028
C2115 R1573
C1672
R1716
R2013
R1715
C1619
R1972 C1401
R1575R1581
C1665
C2113 HSYNC
R1933
C2146 Q1030 R1973

C2111 C1395
C1968
R2017 N1027 R1577
C2059 Q1018
L1036
L1035
L1034
R2021 C2149 C2136
C2129
C2058
R1981
R1982
C1436
R1639
R1635
R1685
R1686
C1646C1670
FRONT HDMI
C1645
C1389
R1560
C1388
R1561
C2151
R1576
K4T51163QJL1053
C2134 R1928 C1438
C2119 R1901 R1927 C1447 R1550
C1400
M
H
23
D
C
B
F
E
A
C2121 R1704
[MP]
C1391
R1641
C1396
R1926 R1763 R1562R1824 PCK R1533 N1038
R1591 R1766C1456R1821 VSYNC R1690 R1554
R1924
123
C2157 R2034 C2154 C1717 R1705 C1514 R1691 AVSDA R1555R1553
HSYNC
R1657
R1663
R1664
R1665
U1029 C1617
L1134
L1135
L1132
L1133
C1437 R1767 C1459 R1720
R1702 R1701
R2038 C2164 AVSCL
Pb
C2062 R1566 R1568 DE R1556R1601
R1593 C1463R1820 R1722 R1683
N1035
R2044 C2165 R1922 R1699 SPI_MO C1385

C1448 C1466R1732 R1557C1386
AC
AB
AA
W
M
C2162 R2047
U
R
P
N
K
H
R1724
D
C
B
Y
V
F
E
A
T
J
SPI_CS R1559
789
R2058 C2159 R1917 C1453 R1726 1 SPI_MI

R1594 C1473 R1730 R1700 2
R2062 R1597 3 C1616
C2070 X1008 24.576MHZ
R1906 Q1072 R1728

C C
4
C2171 R1669
C2082
R1703 5
R2069 R1713 6 R1668
C1915
C1906
C1904
R1908 R1599 BKT1001

C2064 C2063
7
R1905 R1904
R1667
R1822
R2072
R1823
8
C2180 C2163 U1040 R1710 9 TX_MISO_SF
Q1066 R1603 10 ADV8003_IN2
R2082 PCM9211 C1773 C1430
C1784
ADV8003_IN1
R1914
C2072 11
R1915
R1916
R2085 C1479 R1707 ADV8003_IN0
X100627MHZ
C1611 C1612
U1028 K4T51163QJ
C2185 C2073 Q1067 ADV8003_RST

R1731
U1041 R1596 R1706

N1034
R1588
R1662
TX_TEST1
L1029 R1912 5M80ZT100C5N
R1625
17
Q1049 Q1048 R1590 R1620
C1655
N1015 C1315 C1318 R1909 C1948 Q1073 18

19
R1911 C1467
R1797
M
N
H
R
P
D
C
B
F
E
A
L
J
R1879 D1124
R1913 R1795 C1470 R1621R1622R1623 R1624 R1697 20
21 D
D1073
N1017 R1719 22
123
C1945
C1944
R1698 C
U1024 R1721 23
L1040 R1178 R1184
2 40 ADSP21487 R1619 R1626 D1074 R1183
R1875 R1877 R1892

D1122 D1123 D1135
R1878
C1567
C1969 C1921
C1509 C1510 R1692 C1575 U1026 L1051 C1170 R1177
R1723 C1568 R1187R1180 D1076
R1258 X1005 R1725 ADV8003 R1188R1179D1075
15
789
L1047
C1569
L1044
L1045
R1076 R1727
CY 920 MODULE
R1254 21.875MHZ
R1695 C1574
R1874 R1876
L1046
R1885 R1886
R1479
D1126 D1125
1 39 R1070 R1075 R1729 L1043 E
R1482
R1481
BLUETOOTH (A SIDE) BLUETOOTH (B SIDE)
C1751
R1484
H C1087D1025 C1543
R1363
R1522
R1365
Q1068 C1327 R1151
R1787
R1814
R1815
R1997
C1775
D1026R1069 R1696
R1746
R1750
R1147 R1150
L1136
C1713
R1081R1072D1028 C1551
N1029
C1350
C1351
R1998
R1504
R1505
R1506
R1717 C1153 D1061

R1742
C1708
D1104
R1082 R1071D1027 L1050 C1918 D1062 R1146
R1831
R1827
C1328
C1789
R1830
R1799
R1793
R1810
C1749
R1043 R1152 R1149 D1064
C1314 C1319
C1316 C1317
R1825
C1313 C1320
R1816 R1153 R1148D1063

R1638
R1637
R1039 R1042
D1089
C1357
R1519
R1521
R1520
R1518
R1517
R1545
R1544
U1033
D R1817 R1513 R1514R1515 I C1070D1012 CLAMP1002 C1546
D
L1030
L1028
C1352
C1680
L1027
D1013 R1038 DV1.8V

Q1069
C1951
C1954
R1477
3.3V
C1353
C1727
C1681
R1364
R1345
R1362
R1344
C1840
C1297 C1296 R1044R1041D1015
C1941
R1741
C1923
C1354
R1510 R1045R1040D1014 R1826 C1942

R1512
R1378 R1377 R1516 C1675

Q1027 Q1026 U1007 C1346 C1940
L1055
Q1043
R1480
2 1 R1755
C1709 R1751
Pb
R1782
2 1 X6000
R1478
R1754
C1693
R6001
Q1059 Q1052 32.768KHZ CP6001
R1743
R1748
C1710
U1008
MAC ADDRESS LABEL

R1483
N1013 R1507 R6000

J R1018 Q1063 1. BT_ACTIVE
R6003
R6002
Q1060 R1503 C1707 C6000
G
R1756
R1380 R1779 R1778 R1509 R1014R1017 C1839 IC6000

C2336
R1464 R1508 C1032D1000 Q1055 N1036

2. BT_EINT
R1783
R1381 C1845 TC7SGU04FU
C1752
I O U1030 N1025 D1001 R1013 Q1062 Q1056
REQSOMI R1463 R1449 C6004 C6001 3. WLAN_ACTIVE
C6005
7
R1382 Q1041 R2165

R1773
R1769
R6006 R6005
R1772
N1021
C1729
R1383 C1698 C2104 4. LDO_ON

R2148
R2152
R2157
R2176
R2177
R2178
R2179
R2180
C2308 R2120
C1326
R1412
R1414
R1418
C1331
C6002
L6000
C6007
C2301 R2119 5. BT_PRIORITY
R2129
R2125
R2164
R2135
R2139
C2318 R6012
NET1.2V
R1396
R1398
R1399
6. BT_3.3V C6008
R1867
R1865
R1864
R1861
R1858
R1855
ACKSIMO
R1126
L6002
CLKSIMO
R1216
R1217
R1031
DGND R1271
SIMO
SOMI
C2214 R1122 R1125
C6003
R1270 7. BT_RX
R1145
R1415 C2215 F C1115 D1049

D1002 R1015 R1021
D1003 R1016 R1019
R1427 R1233 R1833 D1050 R1121

C2202
R1127 R1124D1052 U1003 RX3SCL 8. M/DGND
C6006
AC
R1416 R1235 U1000 R2089 R2094C2189
C2320
AB
R1440R1417 R1236 MN864778 R2091 R2096C2188
AA R1129 R1123D1051 MN864778 RX3SDA 9. BT_TX
N1016 R1439 R2090 R2095C2187
Y
U1039
C1307 R1220 R2092 R2093C2206
W
C1865 C1684 MN864778 10. +5V
R1803
R1813
R1792
HAINT0 R1106
C1774
3.3V
V
R1120
C1302 R1898
R1117
N1009 C2319 R1102 R1105 R1161 C1943

U
R1734R1733
R1237 R1850
E E
R6004
R2134 G C1090D1037 R1881 11. D/MGND
X1003 12MHZ
Q1050 C1703
T
C1305 C2321 R1160 Q1051 R1851 R6007 L6001
U1005R1207 R1238 D1038 R1101 C1769 R1882
C1758
C1772
C1704
R2122
C1304 R1163 U6001

R1437
C1336C1337
R6009
C2323 R1852
R6010
R6011
R1241 NET1.8V R1107R1104D1040 R1165 C1701 C1757 R1883 BD00HA3MEFJ
1.1V
C1306 R1242 C2322 R1108R1103D1039 R1166 C1770 R1894
C1303 R6008
C2055C2052
L1122 C1858 R1897 R1893
R1221
L1065
L1064
R1209 R1159
R1834 C1179 R1162
C1685
R1222
D1096
C1301 R1498 X1009 J

R2137 U6000 IBT-06-02
R1208 C1172
R1984
R1243
R1987
R1986
R1985
L1116
L1119
L1118
L1117
C1348 R1496
H
C1308 R1244 R1224 27MHZ
R1390 R1210 BLUETOOTH [MP]
G
R1223 R1500 R1486 R1993 U1055 C1182
C1755
R1788
F
C1173 R1063
27MHZ
R1784
R1247R1785
C1160
C1697
R1225
R1245C1738
C1161
R1835 R1775
ADV7850
R1759
1.1V
E
X1007
R2133 HAINT1
R1753
R1389 C1174 R1226 C1078

D
D1114 D1118
23
R1171
D1115 D1119
NET2.5V
NET1.9V
R1388
C
C1309 R2136 B C2103
R1994 D1112 D1116
D1009D1011
D1005D1007
C1300
D1008D1010
27MHZ
D1004D1006
L1123 L1112
L1113
A
U1018 D1113 D1117
X1000
C1311 A
27MHZ
X1001
C1086
U1063
R1798R1809
CH0AMCLK
R1068R1060
R1066R1061
R1067R1062
R1080
R5F56108VNFP C1312
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
A BKT1000 C1834
R1454 R1800 HPD_P1 HSDA U1062 R1853
C1702
HPD_P2
C1785
R1255
L1121
R1989
R1990
R1265
L1120
R1991
R1988
R1428
R1384 R1267 R1854

R1467
C1077
R1431
C1339
C1325
R1805
D1106
C1344 HSCL R1206
CX870JUNCTION (A SIDE) s
C1195 C1198 C1310 C1691 NIRQA0
L1017 L1018 C1299 C1345 C1690 C1754 NIRQA1
R1747
C1688 C1687 R1186 C1696

C1686
R1095 U1061 D1130D1133 D1134

D1092
D1085 D1086D1087 D1088 C1689 CH0ASD1

R1268 C1202
D1044D1042
D1048D1046
N1011 D1129
D1043D1041
D1047D1045
R1737 R1738 R1170 R1204 C1838

L1063 D1127 D1128 D1131 D1132 CH0ASD0
R1248 C1201 R1169
R1452
C1341
C1343
R1199 L1105
C1841
D1021D1023
U1002
D1017D1019
C2105 64 63
D1020D1022
D1016D1018
64 63 R1168 L1062
R1880 C2043C2042
C1850

D1058 D1060
D1095
D1054D1056
C2044
INT
R1887
D1053D1055
D1057D1059
C1204 L1057 D1079D1080D1083D1084 C1747 C1746 R1866

R1253
R1213
U1019
R1272

C1089
C1203 SW1 L1059 D1077D1078D1081D1082 R1777

N1008 L1014
R1872
N1010 R1256 R1252
C1181
R1776
C1184
R1262 R1250
D1030
D1034
L1015 BKT7000
C2088
D1029
D1033
C2089 Q1058
C2084
D1137 R1956 C2087 R1946 U1006 R1212

EXT C1867 C1866
F F
R1983
R1958 D1136 R1948 R1215 Q1003 1.1V

Z1001 C1186 J R1856 R1859 R1862
R1891
R1249
R1888
R1959 R1949 R1736

D1036
D1032
D1091 D1107 D1108 D1109

D1031
D1035
R1096
R1097
Q1009
IN2_DET
Q1016 IN7_DET
R1873
R1455 C1907 D1121

Q1010
R1456 C1916 D1067 D1068D1071D1072 R1857 R1860 R1863 SW7000

R1435 D1090 R1443
R1448
C1333
Q1015
D1111 D1110 D1120

R1099
D1065 D1066D1069D1070
D1094
C1185
1.HPD
K1003 K1002 C2090 C1905R1967C2091 IN2 IN3 IN4 IN5 IN6 R1869 R1870 R1871 11. GND
CX870 JUNCTION PCB
R1969 Q1005 IN7 N1007 C
R1968 IN1_DETN1001 DDCSDA N1002 DDCSDA IN3_DET N1003 DDCSDA IN4_DETN1004 DDCSDAQ1012 Q1011 N1005 DDCSDA IN6_DETN1006 DDCDATA N1031
N1030
U1043 U1044 IN2+5V DDCSDA
DDCCLK
10. +5V
IN3+5V IN4+5V IN5+5V
I IN6+5V 9. BT_TX
R7029
R7031
R7028
R7030
F
7020-07500-020-1S
G 8. GND
2.DDCDATA
IN1
+5V
7. BT_RX
2.DDCCLK
IN7+5V
D1093 6. NET3.3V
K1000
K1001
2.HPD
DDCSDA
C1338
C1340
IN1 IN2 IN3 H

IN4 IN5_DET
IN5 IN6 E D IN7 5. BT_PRIORITY
DDCSCK DDCSCK DDCSCK
DDCSCK
DDCSCK DDCSCK DDCSCK 4. BT_LDO_ON
CLAMP7000
IN ICT OP ADJ FI 3. WLAN_ACTIVE
2. BT_EINT

1. BT_ACTIVE
5.2V
5.2V
GND
C7016
GND
N7005
G Pb N7000
G
C7007
C7000
R7004
U7000
C7005
BD82065FVJ-E2
HDMI (B SIDE) N7001

N7002
C7015
120PIN PLUG VBUS
C7009
2 1 DATA-
L7002
R7005
R7053
R7038
DATA+
7:THERMALDETB
2:THERMALDETF
6:THERMALDETA
1THERMALDETE
R7009 GND
R7010 R7011 GND
R1000
C1007
C1006
C1003
C1005
C1004
R1675
C1721
C1000
C1001
C1002
R1680
L1058
R1670
C1614
C1613
C2114 R7012
C1347
C1722 L1069
C1958L1068
R1353
5:ASODET
R1359
Q1038
3:DCDET3
4:DCDET4
C2100 C2102 C2101 C1720 C2112 R7013

C1718 R1352 Q1021 Q1019 Q1029 Q1024 R1358
R7015 N7005
C2094
C1716
U1065 R1372 C1294

H C2130
H
C1407
C1404
C1405
R1375
C2093
C1291
C1409
R7027
C2099
R1342
9:THERMALDETC
R1336
R1570
R1485
7:CURRENT_DET
C1420
L1052
14:FRONT_RLY
C1411C1410
C7013
10:DECIN_CR
8:DECIN_CB
R7014
8:AMPSIG_DET
C2097
R1487
C1427
C1425
C1423
BKT7001
6:DECIN_Y
4:DECIN_V
2:COMP_SW2
6:COMP_SW1
C1289
R1370
C2116 R2042
C1415
10:RLY_HIB
C2076 13:C/S_RLY
11:H/P_RLY
16:H/PGND
12:SB_RLY
C2169
2:VAUXV
R1341
R1335
C1428
C2098
R1764
9:DGND
7:DGND
5:DGND
3:DGND
R1765
11:DGND
R2057
1:DGND
R2020 R2049
C1715
C1439 C1950
15:H/PR
17:H/PL
U1027 R1571
C2092
1:DGND
R2027 R2053
3:V_INC
C1441
4:V_INB
5:V_INA
C2095 C1925 C1403 C1955 R2028

MX25L12835FMI C1426 C1421 C1434 C2150
R1569
C1413
C1412
C1416
C1432 U1048
R1580
C1287 R2032
C1620 R1565C1418 R1584R1579 C1429 R1572 R1332 R1348 C2133 R2033 C7014
C1654 C1848 R1578 C2156 R7047
R1980 R1976 C1444 C1435 C2117
R1762
R1582 Q1031 R7052

C1502 C2131
C1558
R1979R1978R1977 C1651 C1422 U1023 C2066 R1932 C2127 R7046

R1671
C1661
C1719
R1679 R1586 C1960 C1500 C2057 R7020

L1037
R1633 R1647 R1655 C2068 C2126 R7051

C1647
C1663
C1648
C1659
C1657
C1662
C1652
R1678 C1555 R1587 C1446

L1049
C2124 R7045
R1900
R1589 C1424 R1925

R1632
C1564 C2056 C2122 R7050

C1664
C2081
C2078
R1903
C2069
Q1040 R2029 R7044

C1524 C1519C1522 C1520
R7023
C1472C1440
C1442
R1931
R1618
C1482
R1644 R1651 C1458

R1953
R1954
R1955
L1038 C1957 C1501 R1902 R7049

C1592 C1460 R1899 C2118
R2037
R1718 C1349 C1714 R7043

C1595 C1649
C1528
C1529
MX25L1606EM21 C2060
C1589
C1590
C1593
C1669
R1501 L1066 C1462 C2061 L1089 R7048

C1588 C1531 C1532 C1847 U1025 C1504
C1476C1471
C1530 C1527 C1667 L1067 C1464 R1923 C2147

C1653
R1907 120
C1468
C1591 C1656 C1503 C2110 119

C1658
C1450
C1650
R1495 C1474 R1598 C1445 R2043

C1660
R1652
C2067
R1921
C1499
R1920
C1559 R1494 C1495

C2079
C1457
C1666
C1478
R1612 C1506 C1475
C1668 R1489 C2065

C1562
R1684
C1455
C1615
R1687
C1451
C1469
C1507
C1508
R1627
C1452
C2083
C2080
C1523 R1711 C1461 C1489 C1956

C2071
C1454
C2077
C1594 C1521 Q1039 C1465

C1505
R1650 R1910
J J
C1557 C1525 R1709
9:DAGND R1918
C2135
C2074
C2075
C1556 C1726 C1481

C1541
R1640
R1595
C1542
R1714
CX870JUNCTION (B SIDE) s
7:CEN+ C2143
R1708
R1616
C1565
R1592
C1563 R1600
C1518 C1515
R1615
C1622
C1636
C1526 R1689 C1477 R1606 C1917

R1611
15:DAGND
12:DAGND
21:DAGND
18:DAGND
C1550
C1553
C1516 R1688 R1604

I O
R1919
3:DAGND
C1582 C1600C1598
C1581 C1597C1599
C1511
R1628 C1512
C1513
C1583
G
22:SBR+
R1613C1487
C1483 C1486
R1610C1485
R1608C1484
C1517
C1627
C1639
C1618 C1560 R1605

19:SBL+
DAGND
C1628
23:SBR-
10:SW+
20:SBL-
8:CEN-
C1642
C1635
C1633
16:SR+
11:SW-
C1632
13:SL+
C2132
C1549
R1694 C1910
17:SR-
C1561
14:SL-
4:FR+
C1480
1:FL+
5:FR-
2:FL-
C1540 R1693 C1640 R1607 R1617

R1643
R1642
C1728
R1609
C1571 U1032
C1959
C1498
C1497
C1496
C1494
C1493
C1492
C1490
C1491
C1488
R1629
R1614
C1552 C1577 C1572 C1630

C1970 C1586 C1579 C1573
C1554C1544 C1671
C1545 C1548 C1578 R1712 C1826
C1585 C1570
C1621 C1643
C1634
C1576
C1537
C1535
C1538
C1536
C1539
C1596
C1584
C1601 C1587 C1846

C1855
C1830
L1041 U1020 C2120

C1953
C1952
R1829 R1646 C1566 C1629

C1623
C1638
C1580
C1644
R5F5210ABDFP
R1523R1524
C1631
C1641
R1794
C1356C1355
C1625
C1637
R1832 R1645
C1782 R1789 C1783R1796 R1802 C1791
C1626C1624
C1761 C1762 C1788 R1828 C1947
9:DACRTNGND
8:DACRTNGND
C1678 R1806 R1807 C1547 L1042 L1048 D1103

15:VOL_MUTE
C1851 R1470
C1679 R1471 C1712 R1744
R7035
R7034
R7033
R7032
13:MICGND
C1760
C1792
C1797
C1787
7:DM920R
R1472 C1946
5:DM920L
R1758 C1711
L1080
L1081
6:DAGND
4:DAGND
2:DAGND
L1039
C1807
R1819
12:VAUXR
C1534
10:VAUXL
C1610R1661
C1609R1660
C1608R1659
C1607R1658
R1634
R1636
R1631
R1630
3:A/D_R
R1473
11:AGND
R1749 R1757
1:A/D_L
C2299 B R1474
L1056
L1054
14:MIC
C2201L1090
C2213L1091
C2216L1092
C2231L1093
C2269 L1096
C2255L1095
C2291 L1098
C2294 L1099
C2281L1097
C2232L1094
C2305 L1101
C2309L1102
C2300L1100
C2298 Q1053 Q1070 Q1071 C1803

Q1054
12MHZ
X1004
L1124 C2296 C2302

C1790
L1111
L1126
L1127
U1066 C2297 R2117 C1832

C1852 C1831 U1064 U1070 R1836
K K
C2307
C2286
C2285
C2284
C2283
C2282
L1114 L1125
R2155R2149
R2161R2153
R2168R2158
R2170R2166
C1781
R2173
R2174
R2175
C1844 C1748 C1793 C1843 C1705

C1766 L1110 C1771 C1802
C1871
C1870
C1796 C2337 R1745

C1779
C1849
C1778
C1764
L1109
R1818
C1750
C1756
C1768
C1189
C1674 C1919 C1926 C1971 C1972 C1967 U1001 C1176
U1056
C1676 C1191 C1177

6:PRE_Z2_MUTE
R1190
5:TU_GPIO2_INT
1:TU_SCLK/SCL
C1673 R1771
2:TU_SDIO/SDA
DGND
DGND
R1194 R1020 D1105

D5V
C1744
MAIN_PWR C1190
R2169
R2167
R2160
R2154
C1677 R1084 R1768 C1724

L1103
L1106
7:PRE_MUTE
R1197 R2138 R1022 C1872

4TU_RST/ST
DGND R1087 C1899

L1070 C1723
C1731 R1770 C1188

R1476
D5V
R1201
R1475
R1198 R1090 R1024 C1187

3:TU_SEN
DGND R1094 R1025 C1192

C1732
C1730
C1733
R1195
R1502
R1497
R1492
R1491
R1488
R1469
D5.2V R1091 U1067

C1869
C2047C1995C1993 C2045
R1029
C1924
Q1074
R1457
R1458
R1459
R1460
R1461
R1462
D5.2V R1088
L1071
R1185 R1191 U1004 R1027 C1868 C1875

R1085
Q1017 U1057 C1725 L1073 C1874 R1387 5.2V
R1868
C2028
C1987
C2030
C1981
C1982
C2033
C2035
C1984
C1976 C2038
C2046
C1088 R1393
C1033 R1006R1010
R2151R2132 C2287 C1853 C1734 L1072

R1411
C1324
C2025
C2203
C2205
C2204
C2303 R7006
C1024R1012R1011
C1015
C1012
R2123 C2277
N7003
R1499
C7006
R1493
R1490
C1973 C2304 C2288 C2278 C2276 R1366 R1422 R1405 5.2V N7004
C1093
C2026 R1128 C1014

C1157 R1367 R1423 R1402
L1082
C1989 C1975 R1130 C2280

R1227
C2289 R1053 C1076 R1037 C1010 R1394 GND R7002 1 2 1 2

C1142
C1130
C1127
C1095
C1144
C1146
C1149
R1408
C1156
C1154
R1132
C1097
C1159
C1147
R1368 C1321
C1073
C1071
C1062
R2172
L1084
C1145
C1059
C1047
C1044
R1786 R1808
C1063
C1013
C1064
C1066
C2290
C1011
L1008 R1052 C1074 C1061 R1230 R1410

C1148
C1098 R1133 L1001 C1753C1745 R1379 GND

C1096
C1094
R2156 R1055 R1425 R7003

R2124
C1065
C2279
C2274
C2275
R1137 C1322
C2237
C1974
C1876
R1057 R1804 R1426

C1171
C1120
R1214
C2054 R1135 C2295 R1058 R1438 R1392

C1034
C1978 C2002
C1037
C2004 C1996
C2041 R1139 C2339 R2150 L1003 R1468 R7000

C1777
C1763
C1776
R1466
R1391
C1759
C1168 R1051C1085 U1068 U1016

L1079
L1078
C1994 C2053 C1167 C2338 L1016 C1084 C1025 C1035 R1228

C1108 R1453 R7001
C1863 C1124C1150 R2143 C1039 R1229
C2051
C1912
C1990
C1335
C2003 C1861 C1166 R1119 R2144 C1083 C1780 L1107

C1125
C1151
C
C2218C2234
L1013
C2223C2235
C2220C2236
L1019 R1118 R2142 C1836 VBUS

R1059
C7001
R1064R1073
R1065R1074
C7008
C1110
C7010
C1106
C1827 C1765 L1108

L L
R2126 L1010 R2163 R1436
C1979 R1884 R2146 DATA-
C1180
Q1064
R2147 A R1264 R1441 U1017 R7007

C1860
C2217
2005 C2006 C1835

R1172 R1181
R1173 R1182
L1083
C1298
C1334 C1323
C2340
R2159
C1122 C1165
C1105 R1774 R1781 R1234 DATA+

C1107
C1986C1983
C1116
C1862C
C1829 R1442 R1395

C1980 C1104 C1740 C1736
C1117
C2000
C1183
C1118 C1965
C7003
C7002
R1465
C2207
C1135 R1780 GND

C2210
C2212
Q1065
C2010
R2097 C1864 Q1032 R1791R1790

C2001
R2162
C1121
C1163C1164
C1136
R1407
R1406
R1404
R1403
C1067 A
C1741
C1742
C1137 C1102
C1739
C1056 U1069 R1386

C1735
R2131
C2219
C2229
C2227
C2228
R1385
C2193
L1075
L1074
C1139 C1873 GND L7000

C1040 C1082
C1042
C1057
C1999
C1027
C1133 C1103
C1706
L1006
C1023
C1699
C2341
R2171
C1909
C1081
C1080C1041
R7040 R7026
R7039 R7025
L1011 R2140 L1005

C1109
R1397
L7001 C7012
C2190
C1101
L1012 R1401 C7004

R1951
L1086 C1126 C2197 C2199R2141 C1903 R1400

C1091
C1140 C1068 R1950

C2195
C2194
C2198
C2192
C1737 L1077 R1421

C2196 C2325C2191
C1966
L1004 C1022
R1192 C1743 L1076 R1947
C2268 C2265
C2266 C2263
C2267 C2258
C1100
R7016
C1043 C1050
R1992 C1169 C1021 R1266 R1952 GND
R1432
R1433
R1434
R1451
C2015
Q1036 R1450Q1037 C1342

C7011
C1330
C1332
R1801 R1752 L1007 R1086 C1051

R1957
R1175
L1000 C1009
C2011 C1857 Q1006 R1246 R1964 C1900

R1811 R1760 R1174 C1020C1049 +5V
R1083
C1029
R1960
R1739
Q1035
R1263
R1269
C1695
R1740
C1833
R1735
C2012
L1087 C1700 C1092

C1902
C1767 R1176 C1048C1019

L1002
C1854 C1030 R1962 C2085 BT_TX R7041

C2034
C2036
C2013 R1761 C1114

C2032
R1812 L1061 U1042

C2017
C2020
C1026
C2248C2242
C2022
C2031
C1018
R1189
C1158
C2271 C2292
C2273 C2293
C2016 C1842
C2024
C2027
C2029
C1113 L1009 C1031

C2021
C2023
C1008
C2014 R2127
C2241C2243 C2254 L1060 C1859 C2086 GND
R1896R1890
R1895R1889
C2312
R7037
C1075
C1054
C1072
C1069
C1052
C1055
C1053
C1060
C1058
C2040 Q1007 Q1008 C1046 C1914

R1033
C1988 R1261
C1099
C1901
BT_RX
C2246
C2252
C2240
C2244
C1998 C1112 C1017

R1141
C1119
R1961
C1134
C1155
C1152
C1138
C1132
C1143
C1131
C1141
C1162 C1079 C1028

C1111
C2007 C2037
C2272
C1129 C2253 R1260

C1016
C1991 C1036 R1966

C1038
C1985 C1123 C2208 C2251 C1045 R1259 NET3.3V R7008

C1694
R7036
C1692
R1077
R1240
C2008 L1085 C1128

C2211 C2249 R1078 C1175 R7017
C1977
C2018
C1992
C2039 C2009
L1088
C2048
Q1057 Q1014 Q1013 C2209 C2250 C C2221 R1079 C1837 R1211 R1965 R1963 BT_PRIORITY R7018
C1997 C2225
C2049L1115 C1178 BT_LDO_ON
Q1004
C2247 C2224
M C2019 C2050C2311 R7019 R7021
M
C2260
C2200 C2262
C2264
C2256
C2257
C2259
C2261
C2245 C2222 U1010 Q1001 Q1000

D1139
C2106 C2226 WLAN_ACTIVE R7022

D1140 C2230 Q1002 MX25L25635FMI C1828 R7042
BT_EINT R7024
21:ZVOL_LATCH
R2118 R2121 C2327

14:REMOTE3.3V
63 64 63 64
23:ZVOL_DATA
17:FRONT_IRIN
22:ZVOL_CLK
19:KILLIR_MZ
BT_ACTIVE
10:VOL_DATA
15:MUTE3.3V
9:VOL_CLK
18:RC_OUT
13:232OMI
12:232IMO
2:DA_+5V
1:DA_+5V
16:RC_IN
11:TRG1
6:A_+7V
5:A_+7V
7:DGND
8:M3.3V
4:A_-7V
3:A_-7V
20:D5V
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
107

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
VIDEO (A SIDE) VIDEO (B SIDE)

JACK5000
AVRS900 ONLY
JACK5003
JACK5002
JACK5005 JACK5001 AVR SERIES 5P JACK5004
AVRX2100 ONLY
A AVRX2100
E2/E1/E1C/K ONLY A
BKT5003
R5740
INPUT (A SIDE)
C5678
C4207
R5011 R5014
RC-5 DVD-Cr OUT_Cr DVD-Cb OUT_Cb DVD-Y OUT_Y SAT-Cr C-OUT SAT-Cb C-DVD SAT-Y C-SAT PRE_SW2 PRE_SW1 Z2_L Z2_R
C5679
R5004 R5027 R5028
R5737
D5617
R5039 R5038 C5010
C5007 C5006
R5037
R5069
R5070
R5071
R5035 R5034
R5736
C5033 R5033 C5008 C5009 R5029
D4203
D4202
R4205
R4204
VIDEO B'D
Q5628 Q5630
D4201
D4200
C5024 C5018 C5026 C5017 C5027
C4208
C5025 C5023 C5021
INPUT B'D
1.0-9-4PW
N4700
J5039 R4200
7028-07494-102-0
J5071 R4201
B 7028-07495-101-0 J5021 C4200 R5020
C5015 Q5629
B
C5014
J5001 J5022 C4204 C4209 R5022
R5026
C5016
R5025
R5024
R5023
CLAMP702
R4202 R4215 R4216

R5718 J5038 C4203 C4201
R5312 R4203
R5002
R5003
R5036
TU_GPIO2/TUNED
TU_RST/ST J5000 J5031
JACK4202
R5021
TU_SEN JACK4201
R5019
R4294 J5005 C4211 C4205 C4202
C5019
NJM2586AVC3C5020
TU_SDIO/SDA R4293 C4218 C5032
TU_SCLK/SCL Q4201 Q4200 Q4214 Q4218
TU_GND R4292
R5314
R5313
232OMI J5054 R5016

TUNER_R
NJM2595MTE1
C5012
TU_GND C4216 C4217 232IMO C5022 R4213 R4212 R4226 R4214R4229 R4217
REMOTE3.3V
R4234 R4223
R4235 R4224
TUNER_L C4212
C4554
C4219 C4214 M/DGND
IC5001
IC5002
C4215
BAR CODE
J5053 R5018
R5017
R5015
J5032
J5035
J5033
C4213 TRG1
J5041
A_+7V Q4203 Q4202 Q4212 Q4217

A_+7V
R4225
R4227
R4231
Pb
VOL_DATA A_-7V R4236 R4244 Q4219
BAR CODE
VOL_CLK A_-7V
J5043
VOL_LATCH TRG_GND
R4222R4242 R4228
R5007
R4243
R5010
R5008
D5V TRG_15V R4230
KILLIR C5013
C RC_OUT R4239 C
J5052
FRONT_IRIN IN ICT OP ADJ FI C4222
7P/11P
J5024 CN5003 R5009

CN4703
C5262 C5263 RC_IN ZONE2_L R4238 C5030

J5036
J5037
C5255 MUTE3.3V C4210 C4206 C4221 ZONE2_L Q4206Q4205 Q4204

9P
R4237
R4258R4241
R5341R5310 REMOTE3.3V J5025 AGND AGND
C5266 232IMO J5030 R4245
232OMI ZONE2_R ZONE2_R
TRG1
R4240
MUTE_Z2 MUTE_Z2
R5340 MVOL_DATA J5027 J5013 PRE_MUTE PRE_MUTE
17P
C5011
23P
IC5201 MVOL_CLK PRE_SW1 PRE_SW1

M3.3V J5051 AGND
R5323 UTC4580 M/DGND AGND
R5304 A_+7V J5028 J5014 J5070 C4220 D5V(MX) D5V(MX)
C5265 A_+7V KILLIR KILLIR
A_-7V RC_OUT RC_OUT
A_-7V FRONT_IRIN FRONT_IRIN
IC4200 DA_+5V J5026 J5029
J5050
CN4701 RC_IN RC_IN
R5336
R2A15218FP C5267 DA_+5V CP4200 VOL_MUTE VOL_MUTE

C5251 J5072 M3.3V
J5047
J5044
J5048
J5049
M3.3V
Q5626
J5042
MUTE_3.3V MUTE_3.3V
A_-7V A_-7V
C5258 R4248 A_-7V A_-7V
7P
IC5202 ZONE2_L R4244 PRE_MUTE J5040 J5006 Q5625
R5719
J5069
C4232
AGND C4556 C5662

C4233
MUTE_Z2
C4236
R4257
BD3812F R4291
CP4202
ZONE2_R R4247
D EXT_FR MUTE_Z2 TU_GPIO2/TUNED ZD4200
ZJ3.6B
C5663
D
IN
AGND TU_RST/ST J5016

EXT_FL R4245 TU_SEN J5007 R4300 R4295
AGND TU_SDIO/SDA
C4247
C4555
ICT
EXT_SW PRE_MUTE TU_SCLK/SCL Q4207
Q4215
R5720
C4230
AGND PRE_SW C4247 R4246 J5017 J5008

C4234
J5055
EXT_C
17P
AGND CP4203
D4211
D4210
AGND
R5710
R5711
EXT_SR D5V
KILLR Q4213 Q4208
OP ADJ
J5018
15P
AGND RC_OUT C4248 J5009

EXT_SL FRONT_IR J5046
AGND C4246 RC_IN
C4235
EXT_SBR MUTE_3.3V C4228

AGND M3.3V
EXT_SBL VOL_MUTE VOL_MUTE
A_-7V MIC_IN J5004 J5045 J5068 J5057
15P
A_-7V MIC_GND
R4326
R4370
FI
C4245 CP4204 VAUX_R Q4216 Q4209 Q4210 Q4211

AGND J5011 J5002
C4231
R4296
Pb
VAUX_L
RET_GND
C4226 C4227 RET_GND J5010 R4298
R4297
R4301
R4371 USB_R J5012
J5056
CN4006 DAGND
E E
R4299
C4225 USB_L J5003
R4302 R4303 R4304
R4373 DAGND J5023 R4305
R4372
C4229
R4374 A/D_R
CP4205 DAGND
11P
R4375
COMPONENT SW2
COMPONENT SW1
A/D_L
CLAMP701
C5029
COMPONENT SW2
C5028
COMPONENT SW1
23P
R4376 C4250 C4249 C4248 C4251

R5013
PREMUTE_SB
PREMUTE_SB
C2145
PREMUTE_S
PREMUTE_F
PREMUTE_S
PREMUTE_F
AMP_MUTE
AMP_MUTE
MUTE_+7V
MUTE_+7V
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
SBR-
D/MGND
D/MGMD
SBR+
D/MGMD
C4242
NJM8080
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
D/MGND
VDICR
VDICB
C2141
VDIPY
V.AUX
CVBS
CN401 DAGND
V_INC
U1051
VGND
VGND
V_INA
V_INB
D4212
VDICR
VDICB
VDIPY
V.AUX
V_INC
V+5V
V+5V
V_INB
V_INA
VGND
VGND
CVBS
SBL-
V-5V
V-5V
V+5V
V+5V
C5031
C4243
V-5V
V-5V
R2062C2171R2058 SBL+
NC
NC
NC
NC
NC
NC
DAGND
R2065
R2064
R2063
R2059
R2056
R2055
SR-
AGND
AGND
AGND
AGND
AGND
AGND
A_-7V C4244 CN5000 CN5001 CN5004

SBL
SBR
SR+
SL
SR
FL
FR
A_-7V DAGND
C
RET_GND R2060C2173C2170 SL-
11P 13P 7P
RET_GND C4241 SL+
PRE_SW
RET_GND C4239 DAGND

A_+7V SW-
NJM8080
R2046R C2167C2166
AGND
AGND
AGND
AGND
AGND
AGND
AGND
SW+
U1047
A_+7V
SBL
SBR
R2045
R2051
R2050
R2048
R2054
DAGND
SL
SR
FL
FR
DA_+5V
2052
C
DA_+5V R2013C2146R2010 C-
F TRG_GND C4240 C+
F
R2009
R2011
R2008
R2016
R2015
R2014
R2047C2162R2044 DAGND
TRG_15V FR-
CN4205 FR+
FRONT CONT (A SIDE) FRONT CONT (B SIDE)

DAGND
R2012
C2148 C2142
FL-
R4288
R4289
15P R2001C2140C2139 FL+
R2007
R2006
R2003
R2000
R2005
R2004
R4290
C4237 C4238 CP4201
R2002C2137R1999
CP4605
17P
HDAM_GND
HDAM_GND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
SBR
SW
SBL
SR
FR
SL
FL
C
HDAM_GND
HDAM_GND
AGND
AGND
AGND
AGND
AGND
AGND
AGND
SBR
SBL
SW
SR
C
FR
FL
SL
BKT5001
G G
R5072
INPUT (B SIDE)
BURRING
SR5009 ONLY
D4203
R4205
D4207
D4209
R4211
C4210
R4220
R4207
D4202
D4208
D4204
D4205
D4206
R4208
R4209
R4550
C4550
R4552
R4206
R4210
C4209 C4553 C4204 R4221 CN4003 CP3403 CP5004
R4219 R4218 C4552 C4551 R4551 C4211
232OMI
H 232IMO R4217 R4232 TU_GPIO2/TUNED
TU_RST/ST
HDAM_GND AMP_MUTE AMP_MUTE
HDAM_GND H
R4216
REMOTE3.3V HDAM_GND AMP_MUTE AMP_MUTE HDAM_GND

7P
M/DGND TU_SEN H/P_GND AGND NC NC AGND H/P_GND

TRG1 R4231 TU_SDIO/SDA FL NC NC FL H/P_L
A_+7V TU_SCLK/SCL H/P_L AGND MUTE_+7V MUTE_+7V AGND
R4230 R4229 TU_GND H/P_GND H/P_GND
A_+7V R4228 R4226 R4233 SL PREMUTE_F PREMUTE_F SL H/P_R
A_-7V TUNER_R H/P_R AGND PREMUTE_S PREMUTE_S AGND
21P
A_-7V R4227 TU_GND MUTE_+7V C PREMUTE_SB C MUTE_+7V

21P
RLY_F PREMUTE_SB RLY_F

TRG_GND TUNER_L AGND AGND
TRG_15V VOL_DATA RLY_C/S SR SR RLY_C/S
VOL_CLK FLY_SB AGND AGND FLY_SB
VOL_LATCH RLY_H/P FR FR RLY_H/P
D5V R5337 RLY_LIB AGND RLY_LIB
KILLIR AGND
R4254
RC_OUT R5338 THERMALDETC SBL SBL THERMALDETC

R4253
R4250
R4251
R4252
D/MGND D/MGND
C5256
R4249
FRONT_IRIN R5326 AMPSIG_DET AGND AGND AMPSIG_DET

RC_IN SBR SBR
R5342
C5257
R5343
MUTE3.3V CURRENT_DET AGND AGND CURRENT_DET

C5275
R5345
REMOTE3.3V V-5V V-5V

R5344
232OMI V-5V SW SW V-5V

232IMO VAGND AGND AGND VAGND
TRG1 PREMUTE_F PREMUTE_F
FRONT CNT B'D
J5019
7028-07494-201-0
MVOL_DATA R5331 VAGND PREMUTE_S PREMUTE_S VAGND

R5311
J5020
MVOL_CLK V+5V CP5001 V+5V

PREMUTE_SB PREMUTE_SB
M3.3V R5300
J M/DGND
A_+7V C5253
R5315 V-5V
V-5V
V-5V J
A_+7V C5271 R5318 V-5V
A_-7V C5272 VAGND VAGND
13P
A_-7V VAGND VAGND

DA_+5V C5273 V+5V V+5V
DA_+5V V+5V V+5V
COMPONENT SW1 COMPONENT SW1
V_INA V_INA
CLAMP 303
V_INB V_INB
V_INC V_INC
ZONE2_L COMPONENT SW2 COMPONENT SW2
Pb
PRE_MUTE AGND NC NC
ZONE2_R C5269 EXT_FR D/MGND
MUTE_Z2 MUTE_Z2 AGND D/MGND
TU_GPIO2/TUNED EXT_FL R4287
TU_RST/ST C5270 AGND
TU_SEN EXT_SW R4277
J5063
J5062
J5061
J5060
J5059
J5067
J5066
J5065
J5064
PRE_MUTE AGND
TU_SDIO/SDA PRE_SW EXT_C R4276
TU_SCLK/SCL
CLAMP 302
AGND AGND
D5V EXT_SR
KILLR AGND
RC_OUT EXT_SL R4275 CP5000
FRONT_IR AGND
K RC_IN
MUTE_3.3V
EXT_SBR
AGND R4274
A_-7V
A_-7V
RET_GND
K
VOL_MUTE EXT_SBL R4273 D/MGND D/MGND
M3.3V RET_GND
R4262
VDICR VDICR
R4261
MIC_IN VOL_MUTE RET_GND D/MGND

11P
MIC_GND A_-7V R4272 A_+7V CP3404 D/MGND

A_-7V A_+7V VDICB VDICB
VAUX_R D/MGND
AGND R4271 DA_+5V H/P_L D/MGND
VAUX_L R4260 DA_+5V VDIPY H/P_L VDIPY
TRG_GND D/MGND H/P_GND H/P_GND D/MGND
RET_GND
RET_GND R2069C2180R2072 TRG_+15V F5009 T1.6AL/250V CVBS H/P_R
RLY_F
H/P_R
RLY_F
CVBS
R2073
R2076
R2075
R2070
R2077
R2079
USB_R D/MGND D/MGND

DAGND V.AUX RLY_C/S RLY_C/S V.AUX
R2071
17P
USB_L D/MGND FLY_SB FLY_SB D/MGND

R4259
C5052
C2183 RLY_H/P RLY_H/P

DAGND C2182
CLAMP 301
A/D_R RLY_HIB RLY_HIB

DAGND F5009B F5009A THERMALDETC THERMALDETC
A/D_L CN4002 AMPSIG_DET AMPSIG_DET
F5008 T1.6AL/250V
C5051
CURRENT_DET CURRENT_DET
-8V_IN COMPONENT SW1 COMPONENT SW1 -8V_IN
-8V_IN V_INA V_INA -8V_IN
RET_GND V_INB V_INB RET_GND
RET_GND V_INC V_INC RET_GND
C5050
SBR- R4268
15P
SBR+ RET_GND COMPONENT SW2 COMPONENT SW2 RET_GND

L DAGND R2017C2151R2021 +8V_IN F5008B F5008A D/MGND D/MGND +8V_IN L
NJM8080
SBL- +8V_IN +8V_IN

SBL+ R4269
F5007 T1.6AL/250V
U1053
-5V_IN -5V_IN
AGND
AGND
AGND
AGND
AGND
AGND
DAGND R4270
PRE_SW SBR
FR
SR
SBL
-5V_IN
SL
-5V_IN
FL
C
SR- C2184C2186R2084
SR+ VGND VGND
R2081
R2080
R2083
R2086
R2087
R2088
DAGND VGND VGND

SL- +5V_IN +5V_IN
C5049
R4266
SL+
CLAMP 300
+5V_IN +5V_IN
R4267
DAGND CP3401
C2138
R2082C2185R2085 F5007A
U1049
F5007B
AGND
AGND
AGND
AGND
AGND
AGND
AGND
TRG 15V TRG 15V

NJM8080
SW-
J5015
TRG 15V
SBR
SW+ TRG 15V

SBL
F5006 T1.6AL/250V
SR
FR
SL
FL
DAGND D/MGND D/MGND

C
C2144
C- VDICR VDICR
C+
R2023
R2024
R2018
R2022
R2025
R2026
D/MGND
11P
D/MGND
R4264
DAGND
R4265
AUDIO_GND
VIDEO_GND
VDICB VDICB
R4263
FR-
AUDIO_AC
AUDIO_AC
VIDEO_AC
VIDEO_AC
FR+ D/MGND D/MGND

AUDIO_GND
VIDEO_GND
C2152C2153R2019
TRG_AC
DAGND
AUDIO_AC
VDIPY
AUDIO_AC
VDIPY
VIDEO_AC
VIDEO_AC
C5047
C5046
BKT5002
FL- F5006B F5006A D/MGND D/MGND

J5058
C2155C2158R2036
TRG_AC
FL+ CVBS CVBS

R2030
R2031
R2035
R2039
R2040
R2041
F5005T1.25AL/250V D/MGND
C5048
D/MGND
V.AUX V.AUX
R2034C2157R2038 D/MGND D/MGND
M CP5003
M
F5005B F5005A TRANS 8P TAP
BURRING
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
108

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
A A
AMP (A SIDE)
7CH AMP B'D
AGND
AGND
AGND
AGND
SBL
AGND
AGND
CP401
SBR
SBL
BAR CODE
FR
SR
FL
SL
IN ICT OP ADJ FI WIRE G400
C/S DIP
C
BKT400
7020-07497-000-0S
C408 G401 G401 G402
SBR
BONDING
FL SL C FR
WIRE J590 WIRE
R686
BONDINGR687
J598
B B
R557
SR
R427
C456 BONDING
R436
R600
R610
R609
C424
R514
R558 C440 C472 R713

R601 R644 WIRE
D418
Pb
BURRING R515 R471 R472
J509
VR404
D417
C474 BONDING
R716
R570
C410 R428 R527 R714 R699

R566
R613
R523
C442
R695
R480
R653
R643
D406
R711 J559
J591
R652
R710 R440
J589
R715
C488
D405
J468
D412
R696
TP401
D435
D436
R712
J401
J518 J535
D441
D442
R437 R484 R656 C504
D411
D424
R434 J402 J494 TP403 J539 J546

J572
D430
C458 VR403 J520 C476 J537 C490
VR401 C460 R571 C444 C438 VR402 C428 C426 J544 J558 WIRE C506
R441
C454
R572 VR405 C470 R615 C492 BONDING C508 WIRE
J427
VR407 BONDING
R521
R442 VR406
R509
J574
J557
J531
G400
R701
R465
R583
R625 R658
R410
R638
J479
R481
R607
R453
R567
C406 R516 C422

R497
C412
R614
R595
D423
C486 C502
R524
R669
R657
R626
R429 R602
R552
R485
R559
R528
R700
R529
D429
R422 R486
R540
R582
R438 C435 R611 G402
J505
R720
R452
R564
Q435
R414 C404 R495 R525 R478 R694

R473
Q471
R721 WIRE R650 WIRE
Q483
R568 R451 R688
R573
J586 R719 R577 BONDING R645 BONDING R697

R538
R717 R445 R482

R443
C436 R505 R654
Q472
C518
C468 TP405 R624
R616
R702
Q426
C Q411 R722
C
R659
Q447
J490
Q459
R487
TP404 R718 R723
Q460
R489
R668
C483
C451 R681
C467
R408 Q423 R620

C452 C519
R496
R530
R404 C499 TP402 TP406 R667

R409 Q448 Q436 R581 Q462 WIRE WIRE
J442
Q412 R539 Q414 Q424

Q438
J432 J458 R591 Q449 R461 BONDING
R677
BONDINGQ484
R634
J560
R418 J484 TP407
J510
R534
R548 R448 C500

R488
C484
R663
ZD401 Q437 R492 Q425
Q402 ZD407 J583 Q450 Q413 J562
J405
D401 ZJ5.1A D431
J500
Q401 D413 R574 R621 Q461 D437 Q473
J536
D419 ZJ5.1A C420
R617
D425
J570
J404
ZD404
R444
R531
ZD413
R592
R405 R578 Q474
ZJ5.1A
R673
R401
R544
J403 ZJ5.1A
R660
R630
R635
R533
R457
R535
JP539
R506
CN404
J512
J464
R403 D407 ZD416
JP558
ZD410 R491
J532
R585 R576 ZJ5.1A R662
JP544
R589
R619
JP494
THERMALDETE ZJ5.1A R447
J534
R402
R490
R705
R462 R664
R707
R575
R499
THERMALDETF
R549
J578
J406
DC DET3
R421
J566
R678
R456
J514
J448
C513
J552
J416
JP518
ZD419
JP574
R419
J526
JP535
JP520
J410
ZJ5.1A
J474
R703
J436
J422
DC DET4
R628
JP537
J540
J542
J538
J480
J533
JP416
J462
R536
J488
J457
J587
R413
J585
J440
J496
JP468
R629
R543
J465
R618
C515
R671
R661
R709
R708
R704
J414 ASO DET
J516
R446
J519
J438
J565
J571
J543
J482
J564
J492
CP405
J434
J568
J460
JP546
J439
R532
J513
J415
R706
J506
J418
JP442
J413
J407
J522
RADI THERMAL
R416
J441
J428
D D
R675
JP572
TR THERMAL SBL
J491
J431
J411
J430
J429
J493
R632
J584
R455
R503
NC
J486
J487
J508
J511
J569
C419
R546
J467
J485
J567
R542
J588
SBR
R672
J444
R459
CP402
J517
100/100
C427
R477
J515
C507
R692
J548
R433
D408
C411
C489
R627 R508
D432
C516
J463
R498
R412
R550
J547
R649
C491
C505
C517 SR
J412
C459
J573
D402
J545
SL
J408
D414
J409
J521
C473
J470
D420
C475
R606
J461
R563
R411
J443
J437
R454
R670
C409 FR
J489
FL
J541
C457
C441
J435
R493
J417
C443
J495
D426
R541
R420
D438
Q417
J469
R584
C425 CP403 J563

J561 +HIGHB
J453
+HIGHB
+HIGHB R551
C514 R520 C431 -HIGHB
R608
D403 D427 D409 D433 D439
R679
ZD403 ZD406 -HIGHB ZD418 C495 ZD421
C416 C432 C512
ZD409
C463 -HIGHB
J550
J524
J576
D416
J472
R636
C479
J446
J420
C464 ZD412 D421 C448

R507
D415 HIGHGND C496 C511

HIGHGND
J498
C480
J549
J523
J575
ZD402 C415 ZD405 HIGHGND ZD417 ZD420
R593
ZD411 ZD408 ZD414

J455
C447
J497
R463
PREGND
D428
J445
J456
J551
J473
J421
J525
J419
D404 D422 D410 D434 D440

J499
J471
C471
E E
J577
J447
R435 J423 J449 J475 J527 J553 J579

J501 R479 R651 R693
ZD415
C407 R565
J433 C455 J483 C439 J459 C423 J466 C487 J481 C503
J454 J507
R522
J424 R432 J450 J476 J502 J528 R476 J554 J580

R560 R519 R605 R648 R691
J425 J426 J451 J452 J477 J478 J503 J504 J529 J530 J555 J556 J581 J582
R561
R562
R517
R603
R604
R474
R646
R647
R518
R431
R689
R690
R430
R475
C430
C449
C497
C481
C414
C433
C446
C465
C478
C417
C494
C510
C402
C462
R502
R545
R569
R424
R425
R439
R526
R641
R554
R555
R588
R598
R597
R467
R468
R640
R683
R684
R612
R511
R512
R458
R483
R674
R698
R415
R631
R655
B C E ECB B C E B C E ECB B C E B C E ECB B C E B C E ECB B C E B C E ECB B C E B C E ECB B C E B C E ECB B C E
F F
G G
AMP (B SIDE)
SBL C SL FL
SBR SR
C501
C525 FR C524 C453 C520

C526
H C485 C421 H
D455
C437
Q419
D449
Q432
Q420
D451 D447
C469
C509 D453 D445
C413
C521 C461
Q431 Q408 Q429 C405
C522
C523
C477
C445
C429 D448 D450 D443

C493 D452 D444
D456 D446
Q407
D454
Pb
R501
R500
J J
Q405
R586
R449
R464
R587
R733
R734
D457 R407
C403
D458
R731
R732
K K
R590
R547
Q478
Q406
Q418
Q466
Q415 Q442
R685 Q475 R469
Q430
R676 R633 R642 R460 R417 R426

Q454
R510
R504
R553
Q451
Q427
R513 R556
R682
R639
R423
R730 R729 Q463 R725 R596 R724

R727
R466 Q439 Q403

R599 R726
R728
C418
C482
C498
C466 C434
C401
C450
L L
R666 R623 R450 R580 R494 R537 R406

E E E E
C B B E E C B E C B E E C B C B E E C B C B E C B E C B E E C B E C B C E E C B E C B E E C B
C B C B C B C B C B B C
M M
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
109

J
L
F
K
E
B
H
D
C
A
M
1
1
2
2
SBL SBR SL SR C FL FR
3
3
C4022 C4019 C4015 JACK4003 C4013 C4009 C4005 TU_GPIO2/TUNED
JACK4000 JACK4001 JACK4002 JACK4004 JACK4005 JACK4006 TU_RST/ST GPIO2
J4029 RST
TU_SEN SEN
RLY4004 J4121 TU_SDIO/SDA
TU_SCLK/SCL SDIO
R4020 RLY4003 RLY4002 RLY4001 C4002 SCLK
R4019
J4107
J4117
TU_GND TU_+5V
7020-07492-000-0S TUNER_R CP4007 TUNERR
TU_GND TUNERL
J4104 TUNER_L
RLY4000
C4017
C4016
C4025
C4024
R4017
R4018
PACK4000
J4100 C4076
J4102
J4109 J4108 J4105 J4120
4
4
R4009
J4111
R4008
C4030
C4028
R4012
R4013
J4116 J4119
L4000 L4001 J4110
R4011 C4020 J4115
C4003 C4070
9P
R4002 J4106
L4005
R4010
C4006
C4007
R4004
R4015
R4014
SCREW
R4016 3X8
C4023
R4003
C4011
L4006 C4000
C4010
L4002
L4003 L4004 J4118
SCREW SR BKT4143
R4005
3X17
SL
J4114
J4098
C
A_-7V
R4007
R4006
FR Pb A_-7V
J4112 J4113 RET_GND
FL J4095 RET_GND
5
5
IN ICT OP ADJ FI RET_GND J4122
CN4211 A_+7V
J4099
A_+7V
J4097
CN4213
DA_+5V
MAIN B'D DA_+5V
TRG_GND
GND
SBR
SBL
J4065 J4091 TRG_+15V
ZD4002
J4092 BAR CODE ZJ6.8B
R4053
C4054 C4052 D4007
R4001
R4000
CP4006
R4022
R4029
J4096
J4000
J4001
J4101
BONDING
C4058
J4094
C4062
2200/25
J4089
J4073
3300/16 R4031
BONDING
J4079
J4074
J4080
J4078
J4081
(TRIGER MODEL ONLY)
MAIN (A SIDE)
J4070
C4053 J4071 J4090
11P
R4027
R4024
R4025
R4026
R4023
J4128 C4065
6
6
J4076
JP4002

J4051
J4088
JACK4702 C4087
JACK4700 J5050
J4072
C4059
VAGND
V-5V
V-5V
V+5V
VAGND
AMPSIG_DET
DGND
THERMALDETC
RLY_HIB
RLY_H/P
4700/16
RLY_SB
RLY_C/S
H/P_R
HDAM_GND
HDAM_GND
H/P_L
H/P_GND
MUTE+7V
H/P_GND
CURRENT_DET
D4022
C4049 J4085 C4088
D4009
ZJ16B
ZD4158
ZJ3.6B
C4703
ZD4700
CN4212 D4017
J4083 RLY_F
D4029
D4028
D4027
D4025
J4082
J4064
Pb
PREGND
C4089
J4123
HIGHGND
D4036
HIGHGND D4014 R4032
J5051 C4057 J4093
J4125
C4075
HIGHGND J4067
CN4702
7P
J4103 D4020 J4046
C4707 -HIGHB R4068
J4028
J4027
J4045 J4066
TRG_+15V -HIGHB SCREW
J4075
TRG_GND C4702 J4127 J4044 C4067 J4063

-HIGHB 3X8
D4033
D4030
J5053
J5052
D4034
D4035
4700/25
RS232C (A SIDE)
D/MGND R4069 J4055
TRG1 +HIGHB
7
7
RS232 B'D
D4038
D4010
CP4003
J4087
REMOTE3.3V +HIGHB CP4002
TRG_15V
TRG_15V
+5V_IN
+5V_IN
VGND
VGND
J4060
-5V_IN
-5V_IN
+8V_IN
+8V_IN
RET_GND
RET_GND
RET_GND
-8V_IN
-8V_IN
232IMO 15P
232OMI +HIGHB
J4058
J4132
232OMI R4710 21P
F4001B J4037 J4038 ZJ3.6B
232IMO J4053
REMOTE3.3V C4715 JP4001 J4048 ZD4157
TRG1 J4036 J4047 J4126
D/MGND C4706 F4001 <T6. 3AL 250 V> J4035 J4049 D4032
TRG_GND C4066 D4031
J4069 470/50
CP4001
TRG_+15V F4001A J4130
J4129
J4061 J4059
D4016
ILX3232DC4712 SCREW
J4031
J4032
J4131 J4033 J4068
J4052
IC4701 3X17
J4050
C4061
RLY4005 D4019 C4071
C4060
D4037
J4054
J4026
J4023
J4024
IN
IN
G
G
IN
G
IN
IN
OUT
G
OUT
OUT
G
OUT
OUT
J4021
J4022
J4019
J4020
J4018

Service Manual: PPP PP P

Uploaded by

Copyright:

Available Formats

Service Manual: PPP PP P

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Service Manual: PPP PP P

Uploaded by

Copyright:

Available Formats

e Ver.

S0870-1V02DM/DG1407 Copyright 2014 D&M Holdings Inc. All rights reserved.

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

What you can do with this manual

Search for a Ref. No. (phrase) Jump to the target of a schematic

You can use the search function in Acrobat Reader to

1.Press Ctrl+Shift+F on the keyboard.

2.Enter the Ref. No. you want to search for in the

•Page magnification stays the same as before the

3.Click an item on the list.

Downloaded from www.Manualslib.com manuals search engine

Add notes to this data (Sign) Magnify schematic / printed circuit

• When you want to move the area shown, hold

[Example using Adobe Reader 9]

Print a magnified part of the manual

2. On the "File" menu, click "Print".

3. Configure the following settings in the Print dialog box.

4. Click the Print button to start printing.

Downloaded from www.Manualslib.com manuals search engine

• The Loupe Tool window appears on the screen.

[Example using Adobe Reader 9] [Example using Adobe Reader 9]

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

NOTE FOR PARTS LIST

INSTRUCTIONS FOR HANDLING SEMI-CONDUCTORS AND OPTICAL UNIT

1. Ground for Human Body

2. Ground for Workbench

<Incorrect> <Correct> Grounding Band

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

DIMENSION FOR AVR-X2100W

Downloaded from www.Manualslib.com manuals search engine

DIMENSION FOR AVR-S900W

Downloaded from www.Manualslib.com manuals search engine

1. Press the power button to turn off the power.

TUNER ZONE2 ZONE2 MEDIA

PHONES AUX 1 - HDMI SETUP MIC

X ZONE2 SOURCE DIMMER

1 CBL/SAT 2 Blu-ray 3 GAME 4 ONLINE

X TUNER PRESET CH + TUNING －

8U- 110084S : EXTENSION UNIT KIT : 1 Set

Downloaded from www.Manualslib.com manuals search engine

FRONT PANEL ASSY HDMI PCB ASSY SMPS PCB

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

View from the bottom

Downloaded from www.Manualslib.com manuals search engine

View from the bottom

(2) Remove the STYLE PIN. Remove the screws.

(3) Remove the connector wire.

Downloaded from www.Manualslib.com manuals search engine

(3) Remove the connector wire.

Downloaded from www.Manualslib.com manuals search engine

CN5004 CN5001 CN5000

Downloaded from www.Manualslib.com manuals search engine

(3) Remove the connector wire. Remove the screws.

Downloaded from www.Manualslib.com manuals search engine

Displays the version of firmware such as the main firm-

•Page magnification stays the same as before the

• When you want to move the area shown, hold

w •Check the SUB(U1020)