Mapnual For PA System !! WMA220BM
Mapnual For PA System !! WMA220BM
Mapnual For PA System !! WMA220BM
1 2
www.PyleUSA.com www.PyleUSA.com
OPERATION ON AC POWER CONNECTION
Plug one end of provided AC cord into the AC input jack on the left side • The KEYBOARD IN socket can be connected to a electronics device.
of the amplifier. Then plug the other end of AC cord into AC power outlet. Turn • The CASSETTE IN socket can be connected to a cassette player or other
on the unit using the power/volume switch. audio player.
• The REC OUT socket can be connected to a recording device or to the input
NOTE: To avoid damaging your unit, make sure AC power is same as that jack of a power amplifier to further amplify and enlarge the audio power.
marked near AC input jack) • The MIC IN socket can be connected to wired dynamic MIC. Keep MIC head
OPERATION ON DC POWER away from the speaker of main unit to avoid feedback.
This unit can be powered also using external 12V DC power. Connect external BLUETOOTH/MP3 OPERATION
12V DC power to DC input jack on the front of the amplifier. Observe the 1. Insert flash drive into USB port or Micro SD Memory Card into Micro SD
correct polarity as following. card slot, system will play the music in flash drive or Micro SD Card
automatically. If both flash drive and Micro SD Memory Card are inserted,
system will play the music in flash drive. To play music in Micro SD Memory
Card press MODE button to switch to SD mode.
2. To play music from your mobile phone etc via bluetooth, press MODE button
to switch to BT mode. Turn on bluetooth function of your mobile phone and
search for Pyle Audio and connect. Then you can play your music in mobile
phone.
OPERATION ON RECHARGEABLE BATTERY
This unit can be powered internally using the built-in rechargeable battery. ATTENTION
When AC power is connected, if battery charging indicator lights red, the 1. If feedback (howling sound) occurs, try first turning down the treble control.
rechargeable battery is not fully charged and will be allowed to charge while If feedback still is present, try turning down the volume or repositioning this
unit with respect to the wired or wireless microphone being used.
the unit is powered by the AC power. (Note: Turning off the unit power switch
2. Extend the antenna fully whenever using the wireless microphone to ensure
will allow the battery to recharge more quickly.) If the battery charging indica-
optimum performance and maximum range.
tor lights green, the battery is fully charged and ready to power the unit alone.
Shut off the power switch and disconnect the AC power. Turn the unit back on BELT PACK TRANSMITTER OPERATION
and the rechargeable battery will power the unit alone. 1 2 3 4
Parts Description
Note: This unit does not recharge batteries. When using 'D' Batteries, do not 6. Lapel MIC 5
connect AC or DC power. 7. Headset MIC 7
3 4
www.PyleUSA.com www.PyleUSA.com
OPERATION • Audio (3.5mm) Output, Connect External Devices
1. Open battery cover and install 2PCS AA batteries into battery compartment • Full Range Stereo Sound Reproduction
with correct polarity. And then close the cover. • Impressive Bass Response
2. Plug in either the clip-on or the headset microphone. • Convenient Carry Handle
3. To use the clip-on MIC, attach it at chest level. Do not place too close to the • Echo, Bass, Treble Audio Configuration Controls
mouth- a distance of about six inches usually works best. To use the headset • Perfect for Karaoke, Crowd Control, House Parties
*Ability to be Powered by External Wall Power Adapter (Not Included)
MIC, place it on the head and adjust the MIC boom so that the MIC is about
one inch to the side of the front of the mouth. Bluetooth Connectivity:
• Wireless Music Streaming Audio
Note: The clip-on or headset MIC wire is also the transmitting antenna. Rolling
• Works with All of Your Favorite Devices
up or shortening the wire may reduce the effective operating range. Extend (Smartphone, Tablet, Computer, Laptop, MP3 Player, etc.)
the wire fully during use and keep it as straight as possible. • Bluetooth Version: V3.0
4. Turn on the transmitter by sliding the power switch to ON position. Power • Bluetooth Network Name: Pyle Audio
indicator will give a single quick flash, indicating usable battery strength. In • Bluetooth Wireless Range: 30' ft.
the case of a dead or low battery, the power indicator either will not go on at What's in the Box:
all or will stay on continuously, indicating that the battery should be • PA Speaker Amplifier
replaced with a fresh one. • Wired Handheld Microphone
5. The RF indicator on the amplifier should now be lit. • Headset Microphone
6. Adjust the volume control of body pack and/or volume control of the • Lavalier Microphone
amplifier to a comfortable listening level as desired. • Belt Pack Transmitter
7. If the transmitter is not going to be used for any length of time, slide power • Shoulder Carry Strap
• Power Cable
switch to OFF position and remove the battery.
• (2) x ‘AA’ Batteries
PWMA220BM Technical Specs:
Portable Karaoke PA Speaker Amplifier and Microphone System • Power Output: 60 Watt MAX
Wireless BT Streaming, Built-in Rechargeable Battery (Includes Belt Pack • Speaker Impedance: 4 Ohm
Transmitter, Headset, Lavalier & Wired Handheld Microphone) • Frequency Response: 25Hz-15kHz
• Maximum USB Flash Memory Support: 32GB
Features:
• Digital Audio File Support: MP3
• Versatile Public Address Microphone & Speaker
• Main Unit Rechargeable Battery, 11.1V Li-iOn, 1800mAh - 19.98Wh
• Bluetooth Wireless Music Streaming Ability
• *Main Unit Speaker Optionally Battery Powered, Requires (6) x 'D' Batteries,
• Lightweight, Portable & Powerful
Not Included
• Integrated Wired Handheld Microphone
• Battery Operated Belt Pack, Requires: (2) x 'AA' Batteries (Included)
• USB Flash Drive Memory Reader
• Power: DC 12V, AC 120V
• MP3 Digital Audio File Compatibility
• Dimensions (L x W x H): 9.7'' x 5.2'' x 9.5'' -inches
• Built-in Rechargeable Battery, 10+ Hour Operation
• 1/4'' Microphone Input Jack *Wireless Microphone Operating Frequency Range: 203.4 - 215.2 MHz
5 6
www.PyleUSA.com www.PyleUSA.com