Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
225 views

Assignment 2 (Total Marks: 100) EEE 323: Power System II: Fill in The Gaps

This document outlines an assignment for a power systems engineering course. It includes questions to fill in gaps about cross-arms, insulator materials, voltage distribution in insulator strings, and factors affecting string efficiency. It also includes true/false questions and problems involving calculating voltages, capacitance ratios, and string efficiencies for overhead power lines supported by insulator strings. The assignment covers topics like insulator types, their properties and usage, factors influencing breakdown and string efficiency, and methods to improve efficiency.

Uploaded by

Shahriar Saurav
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
225 views

Assignment 2 (Total Marks: 100) EEE 323: Power System II: Fill in The Gaps

This document outlines an assignment for a power systems engineering course. It includes questions to fill in gaps about cross-arms, insulator materials, voltage distribution in insulator strings, and factors affecting string efficiency. It also includes true/false questions and problems involving calculating voltages, capacitance ratios, and string efficiencies for overhead power lines supported by insulator strings. The assignment covers topics like insulator types, their properties and usage, factors influencing breakdown and string efficiency, and methods to improve efficiency.

Uploaded by

Shahriar Saurav
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Assignment 2 (Total Marks: 100)

EEE 323: Power System II

Fill in the gaps [9]


1) Cross-arms are used on poles or towers to provide ............. to the insulators.

2) The most commonly used material for insulators of overhead lines is ...........

3) The potential across the various discs of suspension string is different because of ............
capacitance.

4) In a string of suspension insulators, the maximum voltage appears across the unit ...... to the
conductor.

5) If the string efficiency is 100%, it means that ............. .

6) If shunt capacitance is reduced, then string efficiency is .............. .

7) By using a guard ring, string efficiency is ................

8) Shunt capacitance in suspension insulators can be decreased by increasing the distance of ...........
from .................
9) The insulator is so designed that it should fail only by ...................

True or False. [6]


1) Suspension type insulators are used for voltages beyond 69 kV voltages.

2) In a string of suspension insulators, if the unit nearest to the conductor breaks down, then other units
will remain good.

3) A shorter string has more string efficiency than a larger one.

4) The longer the cross arm, the less the string efficiency.

5) The discs of the strain insulators are used in horizontal plane.

6) When an insulator breaks down by puncture, it is totally damaged.

Answer the following questions: [55]


1) Discuss the various types of line supports. [10]

2) Why are insulators used with overhead lines? Write down the properties of ideal insulators. [5]
3) Why are suspension insulators preferred for high voltage power transmission when compared to pin-
type insulators? [6]

4) Explain how the electrical breakdown can occur in an insulator. [5]

5) What is a strain insulator and where is it used? Give a sketch to show its location. [4]

6) String efficiency for a DC system is 100%? Discuss. [2]

7) Give reasons for unequal potential distribution over a string of suspension insulators. [2]

8) Define and explain string efficiency. Can its value be equal to 100%? [3]

9) Show that in a string of suspension insulators, the disc nearest to the conductor has the highest
voltage across it. [8]

10) Explain various methods of improving string efficiency. [10]

Problems: (6x5=30)
1) In a 3-phase overhead system, each line is suspended by a string of 3 insulators. The voltage across
the top unit (i.e. near the tower) and middle unit are 10 kV and 11 kV respectively. Calculate (i) the
ratio of shunt capacitance to self-capacitance of each insulator, (ii) the string efficiency and (iii) line
voltage. Answer: [(i) 0·1 (ii) 86·76% (iii) 59 kV]

2) Each line of a 3-phase system is suspended by a string of 3 similar insulators. If the voltage across
the line unit is 17·5 kV, calculate the line to neutral voltage and string efficiency. Assume that shunt
capacitance between each insulator and earthed metal work of tower to be 1/10th of the capacitance
of the insulator. Answer: [52 kV, 86·67%]

3) The three bus-bar conductors in an outdoor sub-station are supplied by units of post insulators. Each
unit consists of a stack of 3-pin insulators fixed one on the top of the other. The voltage across the
lowest insulator is 8·45 kV and that across the next is 7·25 kV. Find the bus-bar voltage of the station.
Answer: [38·8 kV]

4) A string of 4 insulators has self-capacitance equal to 4 times the pin-to-earth capacitance. Calculate
(i) the voltage distribution across various units as a percentage of total voltage across the string and
(ii) string efficiency. Answer: [(i) 14·5%, 18·1%, 26·2% and 40·9% (ii) 61·2 %]

5) A string of four suspension insulators is connected across a 285 kV line. The self-capacitance of
each unit is equal to 5 times pin to earth capacitance. Calculate: the potential difference across each
unit, (ii) the string efficiency. Answer: [(i) 27·65 kV, 33·04 kV, 43·85 kV, 60 kV (ii) 68·5%]

6) A three-phase overhead transmission line is being supported by three-disc suspension insulators;


the potentials across the first and second insulator from the top are 8 kV and 11 kV respectively.
Calculate (i) the line voltage (ii) the ratio of capacitance between pin and earth to self-capacitance of
each unit (iii) the string efficiency. Answer: [(i) 64·28 V (ii) 0·375 (iii) 68·28%]

You might also like