SAFETY DATA SHEET

Entered to the Register

Safety Data Sheet 6 3 1 2 1 8 3 9 . 2 0 .4 8 7 8 7 from October 24, 2017.

registration No. 4
Valid till October 24, 2022.
Rosstandart
Safety of Substances and Materials
Information-Analytical Centre Head ________signature_____________/ N.M. Muratova/
FGUP VNICSMV L.S.
Seal: federal state unitary enterprise ogrn 1027700169144 *Moscow* Russian national research centre of standardization,
information and certification of raw stock, materials and substances
Federal Agency for Technique Regulation and Metrology IAC BViM FGUP VNII SMT
NAME:
technical (according to Amilor - sodium carboxymethyl starch
regulatory document)
chemical (according to Not available
IUPAC)
Amilor - sodium carboxymethyl starch
trade
synonyms Not available
ARPC Code code: FEACN Code:
2 0 5 9 5 9 0 0 0 3 5 0 5 1 0 9 0 0 0
.
Product registration information
NOT SUBJECT TO REGISTRATION
Symbol and name of basic standard, technical or information document for products
(GOST, SPECIFICATIONS, OST, STO, (M)SDS etc.)
TS 20.29.59-097-63121839-2017
Amilor - sodium carboxymethyl starch, KMK 100
DANGER DESCRIPTION:
Signal word: DANGER
Short (verbal): the product is a low hazardous substance according to effect on the (hazard class 4
according to GOST 12.1.007). It irritates upper air passages. It evokes mild irritation of skin and eyes
mucosa. It contaminates the environment.

Detailed: in 16 attached sections of Safety Data Sheet.

BASIC DANGEROUS MAC w.z., mg/m3 Hazard class CAS No. EC No.
COMPONENTS (if applicable)

Carboxymethyl starch: Not available Not available 9057-06-1 Not available

Starch: 10 4 9005-25-8 Not available

APPLICANT: Industrial Chemicals LLC, Kazan

(organisation name) (city)
Applicant type: manufacturer, supplier, seller, exporter, importer
(delete as appropriate)
ARCCEO: 6 3 1 2 1 8 3 9 +7 (843) 537-23-93
Emergency Telephone Number:

Head of the applicant organization: signature / M. A. Yutyayev /

(Signature) L.S. print full name
Seal: the Republic of Tatarstan, Kazan, Industrial Chemistry LLC No. 2
SAFETY DATA SHEET COMPLIES WITH UN RECOMMENDATIONS
ST/SG/AC.10/30 GHS.

IUPAC – International Union of Pure and Applied Chemistry (International Union of

Theoretical and Applied Chemistry)
GHS – United Nations ST/SG/AC.10/30 recommendations Globally Harmonized
System of Сlassification and Labelling of Chemicals

ARPCC – All-Russian Product Classification Code

ARCCEO – All-Russian Classification Code of Enterprises and Organizations

FTCC – Foreign Trade Commodity Code

CAS No. – Substance number in Chemical Abstracts Service Register

EC No. – Substance number in European Chemicals Agency register

MAC w.z. – Maximum allowable concentration of chemicals in the working zone area,
mg/m3 (maximum single/shift-average)

Signal word – a word used for laying emphasis on degree of hazard of chemical products
and chosen according to GOST 31340-2013
1. Identification of chemicals and data about a manufacturer or supplier
1.1. Identification of chemicals
1.1.1. Technical name: Amilor - sodium carboxymethyl starch, KMK 100
(hereinafter referred to as product)
1.1.2. Application short recommendations: The product is purposed for application in the oil-
(including application limitations) extracting industry [1]

1.1.3. Additional data:

1.2. Manufacturer or supplier
1.2.1. Full official name of the organization: Industrial Chemicals Limited Liability Company.
1.2.2. Address (postal and registered address): Ul. Ostrovskogo, d.84, Kazan, RT 420095
1.2.3. Phone including for emergency Kazan, (POB) 146, 420107
consultations and limitation of time: +7(843) 537-23-93 (8.00 – 16.00 Moscow time).
1.2.4. Fax: +7(843) 537-23-94 (automatic).
1.2.5. Е-mail: Timofeev_a_i@mirrico.com; info@mirrico.com

2. Hazard identification
2.1. Hazard level of chemicals in the mass: Classification according to GOST 12.1.007: acute
(Data about hazard classification according to the legislation toxicity. [2,9]
of the Russian Federation GOST 12.1.007-76) and GHS - a low hazardous product according to the exposure on
(GOST 32419-2013, GOST 32423-2013, GOST 32424-
2013, GOST 324252013)
the body, hazard class 4; [2,9]
Classification according to GHS:
‒ Chemical products, causing serious eye damage/
irritation, class 3;
‒ Chemical products, causing corrosion
(necrosis)/irritation of skin, class 3;

2.2. Marking data in accordance with GOST

31340-2013:
2.2.1 Signal word: Caution. [12]
2.2.2 Hazard symbols: Not required. [12]
2.2.3 Short description of hazard: H316: Causes mild skin irritation
H320: Causes eye irritation.
3. Composition (information about components)
3.1. Data about products in the mass
3.1.1. Chemical name: No, mixed formula.
(according to IUPAC)
3.1.2. Chemical formula: No, mixed formula.
3.1.3. General description of composition: The product represents modified starch.
(Subject to brand assortment; production process)
3.2. Components:
(Name, CAS and EU numbers (if applicable), mass fraction,
MAC w.z. or SRLI w.z., hazard classes, reference to data Table No. 1 [2,23,24]
sources)
Components Weight Health standards in air of the working
(name) content, % zone CAS No. ЕС No.
MAC w. z. mg/m3 Hazard class
Carboxymethyl starch: Not available,1 Not available,1 9057-06-1 Not available
Starch: 10, aerosol 4 9005-25-8 Not available
Note: 1 for the analogue: MACw.z. Starch 2-hydroxyethyl ether (starch oxyethyl) and starch: 10 mg/m3,
aerosol, hazard class 4.
4. First aid measures
4.1. Symptoms:
4.1.1. Toxication via inhalation: Cases of acute poisoning under production conditions
are not revealed. Atony, dry mouth, dry nose, throat
irritation, sneezing, nausea, vomit may be observed.
[23,24]
4.1.2. Effect on skin: Hyperemia, edema. [2,23,24]
4.1.3. Contact to eyes: Tearing, sand paper in the eyes, pain, hyperemia,
edema. [2,23,24]
4.1.4. Poisoning via peroral route (upon deglutition): Abdominal pain, nausea, vomit. [23,24]

4.2. First-aid for injured persons.

4.2.1. Toxication via inhalation: Fresh air, rest and rewarming, put an injured person
to a horizontal position, put off discomfortable
clothes, apply for medical aid if necessary.
Mouth-to-mouth resuscitation, if indicated (use
protective mask). Persons rendering first medical aid
shall use personal protective equipment of respiratory
organs and skin. [23,24]
4.2.2. Effect on skin: Remove substance residues, put off dirty clothes,
wash your skin, wash clothes, apply for medical aid
if necessary. [23,24]
4.2.3. Contact to eyes: Wash with stream water during 10-15 minutes, apply
for medical aid if necessary. [23,24]
4.2.4 Poisoning via peroral route: Wash the mouth with water, drink a lot of liquid, take
absorbent carbon, saline purge. Provide the injured
person with rest, warming, fresh air, apply for
medical aid if necessary. Upon vomit stoop a head to
avoid vomit entry into lungs.[23,24]

4.2.5. Contraindications: Not determined [23,24]

5. Measures and fire and explosion safety aids.

5.1. General description of fire and explosion hazard: Combustible substance (powder) [23,24]
(in accordance with GOST 12.1.004)
5.2. Indices of fire and explosion hazard: T flash-ignition temperature 320°C, Tself-ignition
(Range of indices in accordance with GOST 12.1.044 and GOST temperature 420°C; lower flame propagation limit:
Р 51330.0) 40-60 g/cm3. [23,24]
5.3. Hazard caused by Products of combustion and/or When heated, thermal destruction with the formation
thermal destruction: of carbon oxide affecting central nervous and
cardiovascular systems, blood, liver, kidneys, with
signs of exposure - drowsiness, nausea, vomiting,
movement disorder, convulsions, fainting, loss of
consciousness. [23,24]
5.4. Recommended fire-fighting equipment: Sand, diffused water, generated mechanical foam, dry
chemicals. [23,24]
5.5. Forbidden fire-fighting equipment: It is not recommended to apply straight streams of
water. [23,24]
5.6. PPE for fire-fighting: Fire-retardant suit complete with a self-rescue device
(PPE of firemen) SPI-20 [23,24,19]
5.7. Specificity upon fire-fighting: Polymer and paper packaging burns, if exposed to
fire. Dust explosion is possible, if a high
 concentration of powder or granules mixes with the
air. In case of contact with the surface aqueous
solutions or wet powders make it extremely slippery,
injures after falls are possible. [21,23,24]
6. Measures for prevention and elimination of
emergencies and consequences of them.
6.1. Prevention of hazardous imact
on people, environment, buildings, constructions
etc. in case of emergency.
6.1.1. Necessary general actions in case of Stop work, send off strangers, keep a windward side,
emergencies: avoid low places, move the vehicle to a safe place.
Isolate the hazardous zone within a radius of not less
than 50 m, correct the specified distance according to
results of chemical survey. Enter the emergency zone
with complete protective clothes on, observe fire
safety measures, do not smoke, and eliminate sources
of fire and sparks. Render first medical aid to injured
persons, send people from the emergency zone for a
medical checkup, call emergency services. [16,19]
6.1.2. PPE in case of emergencies: Protective multi-service suit L-1 or L-2 complete
(PPE of emergency crews) with an industrial gas mask with an aerosol filter and
cartridges A, B, В8, BKF. [16,19]

6.2. Operational procedure for elimination of

emergencies.
6.2.1. Actions in case of leak, spill, spreading: Stop work, wear personal protection equipment,
(including recovery measures and precautionary measures empty the content into the empty container, collect
providing protection of environment) and send for liquidation to the landfill of hazardous
industrial wastes. Avoid the product entry into water
basins, sewerage and soil. Observe fire safety
regulations, eliminate sources of fire and sparking.
For spreading (laying, isolation) of aerosols use
sprayed water. Measure MAC (w.z., atm. air) for
conformity if necessary, call neutralization
specialists. [16,19]
6.2.2. In case of fire: Inform fire protection service, surrounding people
about the fire, leave the hazardous zone, tell to
firemen the place and the object of burning when
they arrive. Organize evacuation of people from
nearby buildings subject to a direction of movement
of toxic combustion products. [1,16,17,18,19]

7. Storage regulations for chemicals and

handling of them upon loading-unloading operations.
7.1. Safety measures upon handling of
chemicals.
7.1.1. Systems of engineering safety measures: Production equipment, communication lines and
transport packages shall be hermetically sealed. Avoid
spillage, vapour formation, direct contact of personnel
to the product, limit access to the product. Use suction-
and-exhaust ventilation in the sheltered storage
facilities, provide with emergency firefighting
equipment, exits, entrances and aisles should be free.
The premises shall be equipped with fire fighting
 primary means, washstands, medical kits, replacement
kit of personal protection equipment, a pipeline and
industrial sewage. The floor should be easily cleaned
with water and should be with slopes and drains.
[1,8,12,13,14,19, 23,24]
7.1.2. Measures for environment protection: Avoid entry of the product into the environment.
Equipment, communication lines, containers shall be
hermetically sealed. Provide control of concentration
of hazardous substances in the air of a working zone,
sanitary protection zone, and industrial effluents.
Observe c requirements of accumulation, collection,
placements, disposal and utilization of industrial
wastes. Do not discharge the product to municipal
collectors, sewage systems, natural water basins,
rivers and soil. Do not store containers, in which the
product was or is, directly on the ground, do not burn
waste in earth mounds, do not perform unauthorized
placement of waste. [1, 8,12,13,14,19]
7.1.3. Recommendations for safe transfer and Continuity and tightness of packing, avoid
carriage: inflammability of the packaging, unauthorised
access, spillage, entry into the environment. Do not
perform loading-unloading operations with the
product if containers do not comply with
requirements or are improper, if there is no marking
on them. Do not carry with oxidizers, explosive
substances, the substances capable of forming
explosive mixtures flammable upon contact to air and
water, alcalis and acidic-type materials, compressed
and liquefied gases, acids. Observe requirements on
securing and disposition of loads. Avoid external
mechanical effect - damage to the package. Do not
throw, use hooks. [1,19]
7.2. Storage regulations for chemicals:
7.2.1. Conditions and terms of a safe storage: Store in sheltered ventilated warehouses under lock
(including storage life; incompatible substances and materials and supervision, in the original hermetically sealed
upon storage) package, on palettes, at temperature from -35 to 35
°C. Avoid effect of direct sun rays, moisture, fire,
acids, alkalies and oxidants. Storage life of
complying of the product with specifications is 12
months. Separation of substances and materials in
upon storage shall comply with GOST 19433,
12.1.004, incompatible substances upon storage is
moisture, organic substances, acids, alkalis. Storage
premises shall be equipped with replacement
assembly of protective clothes, fire alarm system,
temperature control devices, industrial medical kit
and also fire-fighting equipment. [1]

7.2.2. Containers and package: The product shall be packed into polypropylene bags
(including materials they are made of) according to GOST 30090 and paper multiply bags
according to GOST 2226. Subject to the agreement
with a consumer, other types of containers and
packages providing quality, safety, hermetic sealing
of the product can be used. [1]
7.3. Security measures and storage rules in a life: Do not apply in household use. [1]
8. Control devices for hazardous exposure and
PPE.
8.1. Parametres of a working zone, Health standards are given according to the product
subject to compulsory control (MAC w.z. or SRLI components:
w.z.): - carboxymethyl starch: MAC w.z. control acc.to
starch 2-hydroxyethyl ether (starch oxyethyl) and
starch: 10 mg/m3, aerosol. [3,23]
- starch: MAC w.z.: 10 mg/m3, aerosol. [3,24]
8.2. Provision measures for hazardous substances in Ventilation efficiency. Equipment, containers shall be
allowable concentration: hermetically sealed, avoid dust formation, high
temperatures. Use the product in well-ventilated premises.
Control of concentration of hazardous substances in air of
a working zone, sanitary and hygienic control of
ventilation systems. Laboratory work shall be
performed only in the exhaust fume hood with
ventilation switched on, periodical wet cleaning of
premises. [1,8,13,14,19]
8.3. PPE of the personnel:
8.3.1. General recommendations: Avoid direct contact to the product, dust forming. Do
not eat, drink and do not smoke in the working area.
Use PPE. Make periodical hygienic cleaning of
personal protection equipment. Availability of
replacement PPE. Observe HSE. Availability of fire-
fighting equipment. Persons aged 18 are allowed by
re-sults of medical checkups. Labour protection
briefing. [13]
8.3.2. Respiratory protective equipment (RPE types): Respirators RPG-67А, Lepestok according to GOST
12.4.004. [1,23,24,19,15]
8.3.3. Protection means (material, type): Acid and alkali resistant rubber gloves type I-II
(special clothes, special footwear, hand protection, eye according to GOST 20010.
protection): Specialized clothing (cotton suit), leather boots or
rubber high boots according to 12.4.137, goggles
with a side protection in accordance with GOST
12.4.013. [1,23,24,19,15]
8.3.4. PPE for household used: Do not apply in household use. [1]

9. Physical and chemical properties

9.1. Physical condition: Homogeneous loose powder, the color ranges from
(Aggregative state, colour, smell) white to light-brown, faint odour.. [1]

9.2. Parametres specifying basic properties of Moisture content is not more than 12%. [1]
chemicals, hazardous properties first: Melting temperature: about 170°С
(temperature values, рН, solubility, n-octanol/water index etc.) The substance is not soluble in water or in fat. [1]

10. Stability and chemical reactivity

10.1. Chemical stability: The product is stable subject to a correct storage,
(specify decomposition products for astable products) operation and carriage. It does not form derived toxic
substances in air and sewage with other substances or
factors, at ambient temperature. [23,24]

10.2. Chemical reactivity: It hydrolyzes, oxidizes, forms ethers, salts . [23,24]

10.3. Avoided conditions: Avoid high temperatures, effect of sources of
(including hazard upon contact to substances and materials to moisture, fire, heat, sunrays, contact to oxidizers,
avoid) acids and alkalis, forming of vapors, direct contact to
a person. In case of burning and high temperatures
hazardous substances are emitted. See Clause 5.3
hereof. [1,13,19]
11. Toxicity information
11.1. General description of effect: It is a low hazardous substance according to the
(potential health effect (toxicity) on organism and the most degree of its exposure to the organism, according to
specific displays of hazard) the parameters of single acute toxicity. It irritates
upper air passages. It evokes mild irritation of skin
and eyes mucosa. [2,9]
11.2. Ways of effect: If inhaled, in case of contact to skin, eye mucosa, if
(inhalation, ingestion, skin and eyes contact) swallowed. [23,24]
11.3. Target organs, tissues and systems of the body: Respiratory system, gastrointestinal tract. [23,24]
11.4. Effects dangerous to health upon a direct Irritates the upper respiratory tract by inhalation,
contact to the substance and also aftereffect: high dispersion of particles of the product enables it
(irritant action on upper respiratory airway, eyes, skin, being in the form of aerosol - dust in the air of
percutaneous action; sensibility) industrial premises, as well as rapid penetration of
particles to the respiratory system.
It has mild skin-irritating properties (2% solution,
guinea pigs, four hours, single exposure) - 1 point
(edema – 0 points, erythema – 1 point), mild pink
erythema.
Irritates eye mucosa (2% solution, single exposure,
one drop, a rabbit’s eye) - 1 point, lachrymation,
injected vessels [2]
Sensibilizing properties were not studied, product
components do not have sensibilizing properties.
[2,23,24]
Skin resorptive properties were not studied, product
components do not have skin resorptive properties.
[2,23,24]
11.5. Long-term adverse health effects: Long-term adverse health effects of the product and
(influence on reproductive performance, carcinogenicity, its components were not studied. [29]
mutagenicity, cumulativeness and other chronic effects)
11.6. Acute toxicity equivalents: DL50 10000 mg/kg, intragastric route, mice
(DL50, routes of entry (intragastric, epicutaneous), animal type; (according to V.B. Prozorovsky method). [2]
CL50, exposition time (h), animal type) DL50, epicutaneous route, 2500 mg/kg, rats. [2]
CL50, in inhaled, concentration is not achieved, 4
hours, white mice, single exposure, static conditions.
[2]

12. Information about environmental impact.

12.1. General description of impact on environmental If MAC of the product exceeds, the product pollutes
objects: the atmospheric air, has negative impact on water
(atmospheric air, water basins, soil including observable biological resources, pollutes soil, is transformed in
symptoms of impact) the environment. It changes the appearance, odour,
off-flavour of the water; it has an impact on sanitary
conditions of water basins and their inhabitants. . It
leads to soil degeneration and vegetation depression,
changing their biologic composition, negative impact
on soil animals. [23,24,22]

12.2. Ways of environmental impact: In case of violation of rules of handling, storage,

carriage, unorganized waste disposal as a result of
 emergencies. [1]

12.3 The most important characteristics of

environmental impact:
12.3.1. Health standards:
(allowable concentration in atmospheric air, water including
fisheries waters, soil)

Table No. 2 [4,7,23-26]

Components MACa.a. or MACw2 or AALw, MAC fisheries3 or MAC or AAC
SRLIa.a., mg/l, SRLI fisheries, of soil,
mg/m3 (LHI, hazard class) mg/l mg/kg
(LHI 1, hazard (LHI, hazard class) (LHI)
class)
Carboxymethyl starch: SRLI of oxyethyl
Oxyethyl starch: 1
starch: 1 mg/l, gen., Not determined Not determined
mg/l, gen., hazard
hazard class 3
0,5/0,15, res., hazard class 4 class 3
Starch: Not determined Not determined

12.3.2. Ecotoxicity parametres: Ecological toxicity parameters for the product were not
(СL, EU for fishes, daphnias magna, seaweed etc.) determined (studied). [20,22,23,24]
12.3.3. Migration and transformation in Biodeterioration and biodissimilation properties are
environment owing to biodeterioration and other moderate. The product is not transformed in the
processes (oxidation, hydrolysis etc.): environment. [23,24]

13. Recommendations on waste disposal (residues).

13.1. Safety measures upon handling with Comply with fire safety, industrial, ecological and
wastes formed during application, storage, toxicological safety requirements, occupational safety
carriage etc. regulations. Waste (residues) disposal safety measures
are similar to the measures applied while working with
the main product (see Sections 5,6,7,8 hereof).
13.2. Places and ways of neutralisation, Temporary collection, storage of wastes shall comply
recycling or management of substance waste with SanPiN 2.1.7.1322-03, in hermetically-sealed
(material) including containers (packing): containers (bags), in the designated and agreed place, on
the moisture-resistant ground. The waste should be
carried, recycled and neutralized in specialized
organizations, which have the relevant license. Disposal
of waste products, the product itself, containers,
packaging, strapping material, wood pallets shall be
carried out by burning. Before disposal, the containers
shall be emptied from the residues of the product.
Wastes generated from wood pallets and strapping
material may also be sent for disposal. Meet
environmental requirements. See Section 8 hereof.
[1,13,14]
13.3. Recommendations for waste disposal Do not apply in household use. [1]
formed during household use of the Products:

14. Information for transportation

1
LHI – limiting harmful index (tox. – toxicological; s.-t.– sanitary-toxicological; org. - organoleptic; refl. – reflexory; rez. -
resorptive; refl.-res. – reflexory and resorptive, fisheries (change of market conditions of field aquatic organisms); gen. – general
sanitary)
2
Water of water bodies of household and cultural and general water use
3
Water of water bodies for fishery purpose (including off-shore facilities)
14.1. UN number: Not available. [27]
(according to the UN Recommendations on the
Transport of Dangerous Goods (Model Regulations).
Last edition.
14.2. Proper shipping name and/or transport Amilor - sodium carboxymethyl starch, KMK 100
name:
14.3. Types of applied vehicles: Transported by all types of surface transport according to
cargo transportation rules applicable for this type of a
transport facility. [1].

14.4. Classification of cargo hazard

in accordance with GOST 19433-88:
‒ Class:
‒ Subclass: The product is not classified as hazardous cargo. [1]
Classification code (in accordance with GOST
19433-88 and in case of railway
transportation):
14.5. Classification of cargo hazard
in accordance with UNO Recommendations The product is not classified as hazardous cargo. [1]
concerning hazardous cargoes transportation:
‒ Class or subclass:
‒ Additional hazard:
‒ UN packing group:

14.6. Transport marking: “Keep away from sun light”, “Keep dry”, “Temperature
(manipulation signs according to GOST 14192) ranges”, “Tight packing”, “Top”, “Do not turn over”,
“Piling limit according to the weight”. [1,11]

14.7. Emergency cards: Not required, the product is not classified as a hazardous
(for railway, sea and other carriages) cargo. [19,20,22]

15. Information about national and international legislation

15.1. National legislation
15.1.1. Laws of the Russian Federation: “On Public Sanitary and Epidemiologic Well-Being”.
“On protection of environment”. “On Fire Safety
Regulations”. Uniform sanitary and epidemiologic and
hygienic requirements in the Customs Union.
15.1.2. Documents regulating requirements on The product is not subject to compulsory certification.
human protection and protection of the
environment:

15.2. International conventions and Not regulated

agreements:
(regulation of the Products by Montreal Protocol,
Stockholm Convention etc.)

16. Additional information

16.1. Data about revision (reedition) SDS: The SDS has been elaborated for the first time
(It is specified: «First edition of Safety Data Sheet» or
“SDS was reregistered after expiry of validity period.
Previous SDS No.” or “ Clauses …. were amended, date
of amendment…”)
16.2. List of data sources used upon execution of Safety Data Sheet
1. TS 20.59.59-097-63121839-2017 Amilor - sodium carboxymethyl starch, KMK 100.
2. Toxicological test report FGUZ Center of Hygiene and Epidemiology of the Republic of Tatarstan
No. 47683 dated 05.09.2017, GSEN RU.COA.043 dated 11.09.2008.
3. GN 2.2.5.1313-03. Maximum allowable concentration (MAC) of hazardous substances in the
working zone area.
4. GN 2.2.5. 2308-07. Safe Reference Levels of Impact (SRLI) of hazardous substances in the working
zone area.
5. GN 2.1.5.1315-03. Maximum allowable concentration (MAC) of chemicals in water of water bodies
of household and cultural and general water use.
6. GN 2.1.6.1338-03. Maximum allowable concentration (MAC) of air contaminants in populated
areas.
7. GN 2.1.6.2309-07. Safe Reference Levels of Impact (SRLI) of air contaminants in populated areas.
8. GOST 12.1.005-88. SSBT. General sanitary requirements for working zone air.
9. GOST 12.1.007-76. SSBT Hazardous substances. Classification and general safety requirements.
10. GOST 19433-88. Hazardous cargoes. Classification and marking.
11. GOST 14192-96. Cargo marking. М, Standards Publishing House, 1996.
12. GOST 31340-2013. Precautionary marking of chemicals. General requirements.
13. SP 2.2.1327-03. Hygienic requirements to organization of operating procedures, industrial equipment
and work tools dated June 18, 2003 N 313.
14. SanPiN 2.1.7.1322-03. Hygienic requirements to placement and neutralisation of waste products and
consumption residuals.
15. Decree of the Ministry of Labour of the Russian Federation dated July 22, 1999 No. 26 “On adoption
of typical field standards of free provision of chemical production workers with special clothes,
special footwear and other PPE means”.
16. Safety rules and order of elimination of emergencies with hazardous cargoes upon carriage of them
by rail.
17. Carriage rules of hazardous cargoes by motor vehicles.
18. Carriage rules of hazardous cargoes by rail.
19. Emergency cards for hazardous cargoes transported by rail of the CIS, the Latvian Republic, the
Lithuanian Republic, the Estonian Republic adopted by 48th Railway Transport Council.
20. Globally Harmonized System of Classification and Labelling of Chemicals (GHS).
21. Recommendations on the Transport of Dangerous Goods. Standard policies. 16th revised edition.
22. GESTIS Substance Database http://gestis-en.itrust.de
23. Information card of hazardous chemical and biological substance. Carboxymethyl starch. Certificate
of state registration. Series VT No. 000825, FBUZ RPOKhBiV.
24. Information card of hazardous chemical and biological substance. Starch. Certificate of state
registration. Series VT No. 001410, FBUZ RPOKhBiV