PROPRIETARY MATERIAL SAFETY DATA SHEET SECTION 6: EMERGENCY AND FIRST AID PROCEDURES

COTRONICS EPOXY RESINS

Inhalation: Move subject to fresh air. Give artificial respiration if breathing has stopped.
Eye And Skin Contact: Flush eyes with a large amount of water for at least 15
Durapot 861 Durapot 861A Durapot 862 Durapot 863 Durapot 864 minutes. Get prompt medical attention. Wash skin thoroughly with soap and water.
Durapot 865 Durapot 866 Durapot 867 Durapot 868 Remove and wash clothing before reuse.
Ingestion: If swallowed dilute by giving 2 glasses of water to drink. See a physician.
SECTION ONE: SUPPLIER INFORMATION Never give anything by mouth to an unconscious person.
Manufactures Name: COTRONICS CORPORATION
131 47th Street Brooklyn, NY 11232 SECTION 7: REACTIVITY INFORMATION
In the event of an emergency please call Chemtrec at 1-800-424-9300 (24hr)
Stability: Stable.
SECTION 2: COMPOSITION INFORMATION Hazardous Polymerization: Will Not Occur.
Chemical Family
Part A Resin: SECTION 8: SPILL OR LEAK PROCEDURES
Epoxy Resin: Proprietary Novalac Epoxy 98 - 100%
Part B Hardener: Dike and absorb spill on inert material (sand, earth, etc.). Transfer diking material to
see page 2 containers for disposal. Wear protective clothing. Use breathing apparatus
All materials contained within are listed on the TSCA Inventory list. (MSHA/NIOSH approved, pressure-demand, self-contained) or air mask for large spills
This product is compliant with the RoHS Directive. in confined area. Wash clothing before reuse. Destroy clothing that cannot be
decontaminated (i.e. shoes).
SECTION 3: PHYSICAL PROPERTY INFORMATION Waste Disposal Methods: Incinerate liquid in approved equipment. Landfill or
Melting or Freezing Point: <30ºF incinerate contaminated diking material in accordance with local, state and federal
Boiling Point: >300ºF regulations.
Vapor Pressure (mm Hg) : N/A
Vapor Density (Air=1) : >1 SECTION 9: SPECIAL PROTECTION INFORMATION
Solubility In Water: Negligible
% Volatile (By Weight) : Negligible Ventilation Type: Normal room ventilation.
Specific Gravity (Water=1) : Resin 0.7 - 1.0/Hardener 0.8 - 1.0 gm/cc Respiratory Protection: None required if good ventilation is maintained. Wear
Evaporation Rate (Butyl Acetate=1) : <1 respirator (MSHA/NIOSH approved or equivalent) suitable for concentrations and types
Appearance/Odor: Resin: Viscous Amber liquid/Sweet odor of air contaminants encountered.
Hardener: Amber transparent liquid/Ammoniaodor Protective Gloves: Impervious.
Eye Protection: Chemical splash goggles (ANSI Z-871 or approved equivalent)
SECTION 4: FIRE AND EXPLOSION HAZARD DATA Other Protective Equipment: Eyewash facility.
Flash Point: >295ºF
Auto Ignition Temp: N/A SECTION 10: SPECIAL PRECAUTIONS
Lower Explosion Limit (%) : N/A
Upper Explosion Limit (%) : N/A Store away from excessive heat (e.g., steam-pipes, radiators, from sources of ignition,
Extinguishing Media: Foam, CO2, Dry and from reactive materials). Do not store near food or feed.
Chemical: Water Spray Corrosive Material: Avoid all eye and skin contact.
Misc Info: The use of this and auxiliary materials should be confined to designated
SECTION 5: HEALTH HAZARD DATA work areas. Emptied containers may still contain hazardous residues.
Effects Of Overexposure: Note To Physician: Allergic dermatitis or respiratory response in susceptible
Inhalation: Mist or vapor can irritate the nose and throat. individuals may be delayed even weeks or months after frequent and/or prolonged
Eye Contact: Substantially irritating to eyes. contact. Acute effects can include mucosa damage, severe laryngeal edema, and
Skin Contact: Substance is moderately irritating and can cause superficial burns after shock associated with corrosive agents. Possible mucosa damage may contraindicate
prolonged contact. Not absorbed in toxic amounts. the use of gastric lavage.
Ingestion: Harmful if swallowed.
Delayed Effects: Prolonged or repeated exposure can cause allergic reaction. This Data Sheet Contains Propriety Information Provided by Cotronics Corp For The
Purpose of Safety and Materials Handling.

DATE PREPARED: 11/01/85 DATE REVISED: 02/07/11

Page 1 of 2
HIMS RATING Health = 2 Fire = 1 Reactivity = 0 HAZARD RATING: 0 = Insignificant 1 = Non-Toxic, Slight 2 = Moderate 3 = High 4 = Extreme
 MATERIAL SAFETY DATA SHEET SECTION 5: EMERGENCY AND FIRST AID PROCEDURES
Inhalation: Move subject to fresh air. Give artificial respiration if breathing has stopped.
COTRONICS EPOXY HARDENERS Eye And Skin Contact: Flush eyes with a large amount of water for at least 15
minutes. Get prompt medical attention. Wash skin thoroughly with soap and water.
Durapot 861 Durapot 862 Durapot 863 Durapot 864 Remove and wash clothing before reuse.
Durapot 865 Durapot 866 Durapot 867 Durapot 868 Ingestion: If swallowed dilute by giving 2 glasses of water to drink. See a physician.
Never give anything by mouth to an unconscious person.
Manufactures Name: COTRONICS CORPORATION
131 47th Street Brooklyn, NY 11232 SECTION 6: REACTIVITY INFORMATION
In the event of an emergency please call Chemtrec at 1-800-424-9300 (24hr) Stability: Stable
Hazardous Polymerization: Will not occur
SECTION ONE: PRODUCT IDENTIFICATION
SECTION 7: SPILL OR LEAK PROCEDURES
Chemical Name And Synonyms: N/A Mixture* Dike and absorb spill on inert material (sand, earth, etc.). Transfer diking material to
Formula: N/A containers for disposal. Wear protective clothing. Use breathing apparatus
Chemical Family: 861, 864, 865, 866, 867 - Amine Complex (MSHA/NIOSH approved, pressure-demand, self-contained) or air mask for large spills
862, 863, 868 - Acid Anhydride Complex in confined area. Wash clothing before reuse. Destroy clothing that cannot be
Does not contain MDA decontaminated (i.e. Shoes).
Waste Disposal Methods: Incinerate liquid in approved equipment. Landfill or
SECTION 2: PHYSICAL PROPERTY INFORMATION incinerate contaminated diking material in accordance with local, state and federal
regulations.
Boiling Point: N/A
Vapor Density (Air=1) : >1 SECTION 8: SPECIAL PROTECTION INFORMATION
Solubility In Water: Negligible Ventilation Type: Normal room ventilation.
% Volatile (By Weight) : Negligible Respiratory Protection: None required if good ventilation is maintained. Wear
Melting Or Freezing Point: N/A respirator (MSHA/NIOSH approved or equivalent) suitable for concentrations and types
Vapor Pressure (mm Hg) : N/A of air contaminants encountered.
Specific Gravity (Water=1) : 0.93 - 1.30 Protective Gloves: Impervious.
Evaporation Rate (Butyl Acetate=1) : <1 Eye Protection: Chemical splash goggles (ANSI Z-871 or approved equivalent).
Appearance/Odor: Off white opaque amber liquid/Amine odor Other Protective Equipment: Eyewash facility.
All materials contained within are listed on the TSCA Inventory list.
This product is compliant with the RoHS Directive. SECTION 9: SPECIAL PRECAUTIONS
Store away from excessive heat (e.g., steam-pipes, radiators, from sources of ignition,
SECTION 3: FIRE AND EXPLOSION HAZARD DATA and from reactive materials). Do not store near food or feed. Avoid all eye and skin
contact.
Flash Point: >200ºF Misc Info: The use of this and auxiliary materials should be confined to designated
Auto Ignition Temp: N/A work areas. Emptied containers may still contain hazardous residues.
Lower Explosion Limit (%) : N/A Note To Physician: Allergic dermatitis or respiratory response in susceptible
Upper Explosion Limit (%) : N/A individuals may be delayed even weeks or months after frequent and/or prolonged
Extinguishing Media: Foam, C02, Dry contact. Acute effects can include mucosa damage, severe laryngeal edema, and
Chemical: Water Spray shock associated with corrosive agents. Possible mucosa damage may contraindicate
the use of gastric lavage.
SECTION 4: HEALTH HAZARD DATA Disclaimer: The information supplied is not to be taken as a warranty or representation
for which Cotronics Corp. assumes legal responsibility. It is offered solely for your
Effects Of Overexposure: consideration, investigation and verification. all risk of use, singly or in combination with
Inhalation: Mist/Vapor can irritate the nose and throat. other products, whether or not in accordance with the instructions, directions, or
Eye Contact: Substantially irritating to eyes. suggestions is borne by the user.
Skin Contact: Substance is moderately irritating and can cause superficial burns after
prolonged contact.
Ingestion: Harmful if swallowed.
Delayed Effects: Prolonged or repeated exposure can cause allergic reaction. DATE PREPARED: 11/01/85 DATE REVISED: 02/07/11
Page 2 of 2

HIMS RATING Health = 2 Fire = 1 Reactivity = 0 HAZARD RATING: 0 = Insignificant 1 = Non-Toxic, Slight 2 = Moderate 3 = High 4 = Extreme