Quality Assurance TY Practical Examination Scheme May 2020

Please 1. Each Student has to make individual video of 5-7 minutes of the alloted experiment.
2. Question : What Must Video Include..??
Read Answer: Title Or Aim, Apparatus Info , Theory, Procedure of Measurement with details (determination of Least count if applicable), Results, Error
determination (if applicable), Precautions to be taken while
before conduction experiment , conclusion
3. Above points are guidelines. Select The points Whichever Applicable for your case.
You 4.Students can use their Creativity for Presenting the Video on Practicalsin the Best Possible Way..
5.Video Submission can be done till 11th & 12th May 2020
Start 6.Save the Video with the Roll Number (For Eg. TYC36 ). Other name code will not be accepted.

SER
No Roll No. PRN NO SEAT NO Name Title of Experiment
1 METYC01 0120170005 T199001 GUDUR CHAITRALI GIRISH Demonstration of linear and angular measuring instruments: Vernier Calliper and Sine Bar
2 METYC02 0120170011 T199002 PRITEE DIPAK VINKAR Error determination with linear and angular measuring instruments: Micrometer and Sine Bar
3 METYC03 0120170031 T199005 PRATIK PRAKASH HAPASE Error determination with linear and angular measuring instruments: Vernier Calliper and Sine Bar
4 METYC04 0120170043 T199007 RANJIT SANJAY SAWANT Error determination with linear and angular measuring instruments: Vernier and Bevel Protractor
5 METYC05 0120170057 T199011 HOLE KUNAL GAJANANRAO Error determination with linear and angular measuring instruments: Vernier Calliper and Sine Bar
6 METYC06 0120170069 T199013 VHANTALE SWAPNIL PRABHAKAR Demonstration of linear and angular measuring instruments: Micrometer and Sine Bar
7 METYC07 0120170089 T199019 JADHAV NUPUR MADHUKAR Demonstration of linear and angular measuring instruments: Micrometer and Sine Bar
8 METYC08 0120170096 T199021 KAMBLE BHAGYASHRI ASHOK Demonstration of linear and angular measuring instruments: Vernier Calliper and Sine Bar
9 METYC09 0120170112 T199024 PATIL JAGRUTI PRAVIN Error determination with linear and angular measuring instruments: Vernier and Bevel Protractor
10 METYC10 0120170174 T199038 KINGE ASHISH JAYANT Use of tool makers microscope for determination of complex geometrical application
11 METYC11 0120170196 T199041 PALANDE PRAJYOT PARESH Verification of dimensions & geometry of given components using Pneumatic Comparators
12 METYC12 0120170203 T199043 GHOTEKAR SUDARSHAN BALKISAN Demonstration of linear and angular measuring instruments: Vernier and Bevel Protractor
13 METYC13 0120170211 T199045 DEEPALI BABURAO GOPALE Use of profile projector for determination of complex geometrical application
14 METYC14 0120170217 T199047 SONAWANE NIRAJ ANIL Demonstration of linear and angular measuring instruments: Vernier and Bevel Protractor
15 METYC15 0120170222 T199049 BHUSHAN VIJAYSINGH MORE Verification of dimensions & geometry of given components using Pneumatic Comparators
16 METYC16 0120170228 T199050 BALLEWAR AJAY CHANDRAKANT Demonstration of linear and angular measuring instruments: Vernier and Bevel Protractor
17 METYC17 0120170235 T199053 SAPKALE DIMPAL RAVIKANT Demonstration of linear and angular measuring instruments: Vernier Calliper and Sine Bar
18 METYC18 0120170244 T199054 SANDESH MAHAJAN Demonstration of linear and angular measuring instruments: Micrometer and Sine Bar
19 METYC19 0120170253 T199055 NARKHEDE BHUSHAN AJAY Error determination with linear and angular measuring instruments: Vernier Calliper and Sine Bar
20 METYC20 0120170280 T199058 ADITYA PRAKASH Error determination with linear and angular measuring instruments: Micrometer and Sine Bar
21 METYC21 0120170301 T199062 SWAPNIL YEUTKAR Error determination with linear and angular measuring instruments: Vernier Calliper and Sine Bar
22 METYC22 0120170306 T199064 HANDE AKANKSHA RAMESH Error determination with linear and angular measuring instruments: Micrometer and Sine Bar
23 METYC23 0120170310 T199066 DUSUNGE BHARATI SANTOSH Use of tool makers microscope for determination of complex geometrical application
24 METYC24 0120170314 T199068 RAMBHAD MAYANK BHUPENDRA Error determination with linear and angular measuring instruments: Micrometer and Sine Bar
25 METYC25 0120170326 T199070 SHEDGE NIHAR Demonstration of linear and angular measuring instruments: Micrometer and Sine Bar
26 METYC26 0120170341 T199071 PATIL ANURAG SUNIL Use of tool makers microscope for determination of complex geometrical application
27 METYC27 0120170417 T199086 KUNAL BAZALA Verification of dimensions & geometry of given components using Pneumatic Comparators
28 METYC28 0120170466 T199089 HARSHJEET P PATIL Use of profile projector for determination of complex geometrical application
29 METYC29 0220180294 T199182 GAVAS MANISH VILAS Error determination with linear and angular measuring instruments: Vernier Calliper and Sine Bar
30 METYC30 0120170213 T199046 DONGRE PRANAL BHIMRAO Demonstration of linear and angular measuring instruments: Vernier Calliper and Sine Bar
31 METYC31 0120170484 T199090 SINGH ASHANK ASHISH Error determination with linear and angular measuring instruments: Vernier and Bevel Protractor
32 METYC32 0120170029 T199004 MANDLIK ANIKET RAOSAHEB Error determination with linear and angular measuring instruments: Vernier and Bevel Protractor
33 METYC33 0120170113 T199025 PATIL SAURABH DIGAMBAR Error determination with linear and angular measuring instruments: Micrometer and Sine Bar
34 METYC34 0120170135 T199029 SUMIT MATE Demonstration of linear and angular measuring instruments: Vernier and Bevel Protractor
35 METYC35 0120170165 T199035 DHAWAS TANAY DEORAO Verification of dimensions & geometry of given components using Pneumatic Comparators
36 METYC36 0120170171 T199037 DETHE ANIKET VINAYAK Demonstration of linear and angular measuring instruments: Vernier Calliper and Sine Bar
37 METYC37 0120170201 T199042 BARDE RUSHABH ABHAY Use of tool makers microscope for determination of complex geometrical application
38 METYC38 0120170218 T199048 MISHRA MAYANK RAJKUMAR Error determination with linear and angular measuring instruments: Vernier and Bevel Protractor
39 METYC39 0120170260 T199056 BHAWAR RUSHIKESH VILAS Error determination with linear and angular measuring instruments: Vernier Calliper and Sine Bar
40 METYC40 0120170275 T199057 REHAN FEROZ YAHOO Verification of dimensions & geometry of given components using Pneumatic Comparators
41 METYC41 0120170323 T199069 PATIL RUTUJA RAJENDRA Error determination with linear and angular measuring instruments: Vernier and Bevel Protractor
42 METYC42 0120170374 T199078 SHUBHANKAR CHINCHORE Demonstration of linear and angular measuring instruments: Vernier and Bevel Protractor
43 METYC43 0120170395 T199082 PATIL ABHIJEET SURESH Demonstration of linear and angular measuring instruments: Vernier Calliper and Sine Bar
 44 METYC44 0120170405 T199084 VEDANTA MAHANTA Use of tool makers microscope for determination of complex geometrical application
45 METYC45 0220180002 T199092 PATEL SHAHRUKH SHABBIR Use of profile projector for determination of complex geometrical application
46 METYC46 0220180208 T199166 DETHE NAVNATH BHANUDAS Error determination with linear and angular measuring instruments: Micrometer and Sine Bar
47 METYC47 0220180214 T199169 SANGALE SHUBHAM RATAN Use of profile projector for determination of complex geometrical application
48 METYC48 0220180296 T199183 DULANGE VISHAL JAGDISH Demonstration of linear and angular measuring instruments: Micrometer and Sine Bar
49 METYC49 0220180299 T199185 KALJE AKSHAY SAMBHAJI Demonstration of linear and angular measuring instruments: Micrometer and Sine Bar
50 METYC50 0420170111 T199223 JEET BHARADWA Demonstration of linear and angular measuring instruments: Vernier and Bevel Protractor
51 METYC51 520180082 T199230 DALVE AVINASH VITHALRAO Verification of dimensions & geometry of given components using Pneumatic Comparators
52 METYC69 520190002 T199200 PRATIK PRATIBHA TEKADE Use of profile projector for determination of complex geometrical application
53 0120160189 T199205 KALE NIKHIL DEVIDAS Use of profile projector for determination of complex geometrical application

Please 1. Each Student has to make individual video of 5-7 minutes of the alloted experiment.
2. Question : What Must Video Include..??
Read Answer: Title Or Aim, Apparatus Info , Theory, Procedure of Measurement with details (determination of Least count if applicable), Results, Error
determination (if applicable), Precautions to be taken while
before conduction experiment , conclusion
3. Above points are guidelines. Select The points Whichever Applicable for your case.
You 4.Students can use their Creativity for Presenting the Video on Practicalsin the Best Possible Way..
5.Video Submission can be done till 11th & 12th May 2020
Start 6.Save the Video with the Roll Number (For Eg. TYC36 ). Other name code will not be accepted.