Catalogo Agricola Craft 2020

CONTENT
CRAFT BEARINGS QUALITY CONTROL 5 Type 1 20

LABORATORY Type 2 20
AGRICULTURAL RANGE 8 Type 3 21
DEEP GROOVE BALL BEARINGS 9 INSERT BALL BEARINGS 22
Type 1 11 Type 1 23
Type 2 11 Type 2 24
Type 3 12 Type 3 24
Type 4 12 Type 4 25
Type 5 13 BEARING UNITS 26
Type 6 13
Type 1 27
Type 7 14
Type 2 27
Type 8 14
Type 3 28
Type 9 15
Type 4 28
Type 10 15
Type 5 29
Type 11 16
Type 6 29
Type 12 16
SELF ALIGNING BALL BEARINGS 30
Type 13 17
Type 14 17 Type 1 31
Type 15 18 JOINT CROSS 32

Type 16 18
CROSS REFERENCE 33
ANGULAR CONTACT BALL BEARINGS 19
SHORT KEY TABLE 38
4
CRAFT BEARINGS QUALITY CONTROL LABORATORY
CRAFT bearings Quality Control Laboratory

All CRAFT bearings production is guaranteed because it is tested twice to meet high standards: first in the factory
and second time in the CRAFT bearings Quality Control Laboratory in Kaunas, Lithuania.
The CRAFT bearings Quality Control Laboratory was established in 2012 with the help of University of Technology.
We conduct all necessary tests with the latest measurement and quality-assurance systems utilizing high-quality and
precise measuring equipment:
• Bearing Life (Longevity) • Metal structure
• Bearing Waviness • Roundness
• Noise and Vibration • Roughness
• Radial and Axial clearance • Grease leakage
• Hardness • Dimension measurement
• Geometry • Spectroscopic analysis
Roughness, Roundness and Form analysis

Characterization of surface topography is important in applications
involving friction, lubrication and wear. Generally it has been found that
friction increases with average roughness.
An accurate knowledge of the expected bearing life is essential to the
proper selection of ball bearings. Bearings principally fail due to fatigue
if they are properly lubricated, mounted and sealed against dirt entry.
Fatigue strongly correlates with the surface roughness. One of the
most important fundamental forms for engineering components is the
circular cross-section. Circular forms arise in many applications,
particularly in bearing surfaces. Roughness, roundness and bearing
forms’ testers are critically important elements in the development of
precision-tolerance capabilities. For such measurements, we use the
German-made OPTACOM surface measuring machine VC-10-EL.
5
Noise and vibration testing for bearings

A noisy application might be caused by wavy bearing components,
local defects in the rings and balls or by dirt particles in the bearing.
While basic requirements for a bearing such as stiffness, load capacity,
speed limit and service life play a critical role in applications, low noise
and vibration are even more important.
All of these quality issues for bearings can be tested with the following
bearing vibration equipment: SN-X, S9912-X. High-tech analyses and
measurements such as frequency analysis and further advanced
analyses pinpoint faults. Spectral masks help to optimize the bearing
performance in the particular customer application. With some experience,
the measurement results of these machines can also be used by experts
to detect imperfect manufacturing steps. The introduction of a worldwide
calibration system enables vibration equipment to operate according
to international standards.
Hardness Testing for bearings

Hardness is the property of a material that enables it to resist plastic deformation, usually by penetration.
Hardness is not an intrinsic material property dictated by precise definitions in terms of fundamental
units of mass, length and time. A hardness property value is the result of a defined measurement
procedure. The hardness test of bearing surfaces is conducted with the SHR-3000 tester using the
Rockwell hardness test method. The Rockwell hardness test method consists of indenting the test
material with a diamond cone or a hardened steel ball indenter. The indenter is forced into the test
material under a preliminary minor load of usually 150 kg. When equilibrium has been reached, an
indicating device which follows the movements of the indenter and responds to changes in depth of
penetration of the indenter is set to a datum position.
Axial & Radial Internal Clearance testing for bearings

A bearing’s internal clearance is defined as the total distance in which one bearing ring can be moved
in relation to the other in the radial direction (radial internal clearance) or in the axial direction (axial
internal clearance). Too little or too much internal clearance will significantly influence factors such as
heat, vibration, noise and fatigue life. In extreme applications that produce high or low temperatures,
this clearance needs to be considered in the overall design to compensate for thermal expansion and
contraction of housings and shafts. Bearings having an internal clearance other than Normal are
identified by the suffixes C1 to C5.
Materials testing for bearings rings and rolling elements

There are essentially two choices for the material used in ball bearings - chrome steel or stainless steel. Since
the material plays a major part in the performance of a bearing in any given application, it is very important to
use the correct material. Note that the specified material applies to the load-bearing components only - the
rings and the balls. The retainer and the shields, if used, are usually made from a different material and are
subject to separate specifications. Chrome steel is the standard material used for ball bearing applications
where load capacity is the main consideration. The machinability of this steel is excellent, giving smooth,
low-noise raceway finishes together with superior life. A chrome steel material is recommended in
applications where corrosion is not a factor. Stainless steel is the standard material for miniature and
instrument ball
6
recommended in applications where corrosion is not a factor. Stainless steel is the standard material for
miniature and instrument ball bearings where corrosion resistance is more important than load capacity.
These materials have evolved in response to different manufacturing and application needs. It is
important to note that the actual material used is generally determined by the manufacturer and cannot
be specified by the user.
The bearing’s metal structure is easily determined using the analytical instrument SPECTROMAXx made
in Germany. This instrument is able to monitor the carbon signal during the pre-spark phase and to
recognize the existence and proportion of free graphite in the sample.
Dimension measuring for bearings parts
The Universal Length Measurer (ULM) is a kind of length measuring instrument that integrates fine
mechanics, an optical system and electrical parts into an organic whole. This instrument is used for direct
measurement and comparative measurement for dimensions of parts and components. It also offers
additional equipment for carrying out various special measurements.
Bearing “tolerances”, or dimensional accuracy and running accuracy, are regulated by ISO standards. For
dimensional accuracy, these standards prescribe the tolerances necessary when installing bearings on
shafts or in housings. Running accuracy is defined as the allowable limits for bearing runout during
operation. Dimensional accuracy constitutes the acceptable values for bore diameter, outer diameter,
assembled bearing width and bore diameter uniformity in chamfer dimensions, allowable inner ring
tapered bore deviation and shape error. Average bore diameter variation, outer diameter variation,
average outer diameter unevenness as well as raceway width and height variation (for thrust bearings)
are also included. Running accuracy constitutes the acceptable values for inner and outer ring radial
runout and axial runout, inner ring side runout and outer ring outer diameter runout. All these dimensions
of the bearing parts are measured with high-quality equipment.
Bearing life and grease leakage testing

Bearings are run to failure, using accelerated
speeds and loads and continuous vibration
monitoring. Bearing life testing confirms that
any changes to components, materials or the
manufacturing process will not negatively
impact the bearing's characteristics.
Proper lubrication is a crucial factor in
maximizing bearing service life.
Contamination can have a great impact on
the grease service life and the bearing
service life itself. Using high-quality
measuring and test equipment, CRAFT
bearings conducts grease-leaking and
bearing-life research.
7
AGRICULTURAL RANGE
Nowadays demand of agricultural industry is constantly increasing for solutions of agricultural equipment,
which is continuously operating longer and faster to increase productivity and efficient yield from crop
production in changing industry with every season. To serve the needs of the agricultural machinery,
CRAFT bearings has developed and successfully introduced agricultural bearing range. This range is
designed for a long service life while operating in harsh environments of mud, rain, corrosive chemicals,
extreme heat and heavy loads, while ensuring sufficient resistance against all that.
CRAFT bearings understands the needs of modern farmers therefore applies modern technologies
in bearing manufacturing process, uses the best materials for greater endurance under heavy-load
conditions and after all puts them to the test in CRAFT bearings Quality Control Laboratory to guarantee
efficient performance when operating in the field with minimal work stops. The performance advantages
of CRAFT bearings agricultural range have led to its quick adoption by farmers worldwide.
Reinforced generation of CRAFT bearings agricultural range comes with exclusive short key CA000
and offers high-performance bearing solution designed for saving precious hours while working in
harsh conditions in the field. Optimized internal bearing design gives the possibility for higher loads,
faster and more reliable operating of machinery. Due to innovations, along with advanced manufacturing
techniques, bearing’s performance and reliability are improved in tough agricultural applications. Longer
bearing’s life span due to powerful sealing and bigger loading rate. Excellent rust resistance, which can
prevent corrosion in the process of running bearings. Furthermore, CRAFT bearings’ new friction
management solution with low noise oil ensures low torque and good start performance after long
periods of inactivity.
8
DEEP GROOVE BALL BEARINGS
Series Features
Type 1 • Radial contact single row ball bearings
• Extended inner ring on both sides
• Cylindrical inner bore
• Cylindrical outer ring
• Triple lip sealing
• Hexagonal inner bore
• Spherical outer ring
• Square inner bore
Type 5 • Radial contact ball bearings
Type 6 • Radial contact single row bearings
• Cylindrical inner and outer rings
• For agricultural machinery
9
Series Features
• Special lip sealing
• Lubrication groove
•Triple lip sealing
• Open type (no seals)
• Adapter sleeve complete
• Adapter sleeve, complete
• Special sealing
• Extended inner ring to one side
• Special seals, for this type bearing
10
Type 1
Dimensions (mm) Basic Load Ratings (N)

CRAFT Weight
(kg)
d D C B Dyn. C Stat. C0
WIR21031 49.212 90.000 20.000 49.212 0.715

WIR21133 52.388 100.000 21.000 55.562 1.094
WIR21239 61.912 110.000 22.000 61.912 1.267
203KRRAH02.CA023 16.256 40.000 12.000 18.288 9570 4790 0.080
203KRRAH05.CA005 13.081 40.000 12.000 18.288 9570 4790 0.100
204KRR.CA039 20.000 47.000 14.000 17.700 12800 6650 0.250
207KRRAH03.CA042 35.000 72.000 17.000 25.000 25700 15300 0.550
Type 2

CRAFT Weight
(kg)
A D C B Dyn. C Stat. C0
W208PP16.CA009 31.780 80.000 18.000 36.500 29500 18100 0.670

204KRR2.CA011 17.653 47.000 14.000 20.955 12800 6650 0.150
11
Type 3

CRAFT Weight
(kg)
A SØD C B Dyn. C Stat. C0
204KRRB2.CA013 17.653 47.000 14.000 20.955 12800 6650 0.150

208KRRB8.CA038 31.770 80.000 21.000 36.530 32630 19890 0.620
205KRRBAH02.CA040 22.250 52.000 15.000 25.400 14000 7850 0.440
206KRRBAH06.CA041 25.400 62.000 16.000 24.000 19500 11300 0.500
207KRRBAH09.CA043 28.575 72.000 17.000 37.700 25670 15300 0.870
210KRRBAH02.CA044 32.125 90.000 22.000 30.000 35000 23200 0.980
Type 4

CRAFT Weight
(kg)
W208PPB8 29.972 80.000 30.175 36.520 32650 16250 0.670

W210PPB6 29.970 90.000 30.180 36.530 35050 20684 1.021
W208PPB5.CA070 29.972 80.000 18.000 36.500 29500 18100 1.450
W208PPB5 29.972 80.000 18.000 36.500 29500 18100 1.450
12
Type 5

CRAFT Weight
(kg)
d D SØD1 C B Dyn. C Stat. C0
ST627 55.562 100.000 100.500 33.340 55.562 - - 1.100

EZ410WSS 49.228 125.000 125.625 40.000 53.000 63890 49380 2.326
Type 6

CRAFT Weight
(kg)
d D B Dyn. C Stat. C0
60102RS.CA026 50.000 80.000 16.000 22020 16250 0.260
13
Type 7

CRAFT Weight
(kg)
62072RS.CA036 35.000 72.000 17.000 25670 15300 0.274

6204.CA075 20.000 47.000 14.000 12840 6650 0.107
6205.CA077 25.000 52.000 15.000 14020 7880 0.121
6206.CA079 30.000 62.000 16.000 19460 11310 0.193
6208.CA074 40.000 80.000 18.000 29520 18140 0.353
SL53162T 16.000 53.086 19.400 14020 7820 0.280
Type 8

CRAFT Weight
(kg)
d SØD B Dyn. C Stat. C0
GW210PPB2.CA045 49.225 90.000 30.175 35000 23200 1.500

GW211PPB2.CA046 55.575 100.000 33.325 43500 29200 2.620
14
Type 9

CRAFT Weight
(kg)
6207.CA035 35.000 72.000 17.000 25670 15300 0.273

6207.CA037 35.000 72.000 17.000 25670 15300 0.274
Type 10

CRAFT Weight
(kg)
A SØD B Dyn. C Stat. C0
W211PPB3 38.890 100.000 33.340 9740 5850 1.207
15
Type 11

CRAFT Weight
(kg)
d SØD B Dyn. C Stat. C0
1580204 20.000 47.000 15.000 9800 6650 0.102

1580205 25.000 52.000 16.000 10800 8000 0.100
1580206 30.000 62.000 18.000 15000 11200 0.200
1580207 35.000 72.000 20.000 19600 15300 0.316
1580208 40.000 80.000 18.000 20000 15700 0.391
1580209 45.000 85.000 21.000 25000 20400 0.452
1580211 55.000 100.000 23.000 33500 29000 0.640
Type 12

CRAFT Weight
(kg)
d1 SØD C L Dyn. C Stat. C0
1680204 20.000 52.000 16.000 29.000 10800 8000 0.231

1680205 25.000 62.000 18.000 31.000 15000 11200 0.340
1680206 30.000 72.000 20.000 35.000 19600 15300 0.480
1680207 35.000 80.000 21.000 36.000 22400 18000 0.610
1680208 40.000 85.000 21.000 39.000 25000 20400 0.655
1680209 50.000 90.000 32.000 42.000 31780 21100 0.748
16
Type 13

CRAFT Weight
(kg)
d1 D C L Dyn. C Stat. C0
380708 40.000 85.000 23.000 39.000 25000 20400 0.800
Type 14

CRAFT Weight
(kg)
A D C B Dyn. C Stat. C0
SLE4716S2RS 16.400 47.000 12.000 25.000 81000 52000 0.110
17
Type 15

CRAFT Weight
(kg)
06C042Z 16.027 42.225 15.400 18.672 - - 0.132
Type 16

CRAFT Weight
(kg)
SKE17204KRRB 17.000 47.000 14.000 17.700 13600 6600 0.120
18
ANGULAR CONTACT BALL BEARINGS
Series Features
Type 1 • Double row angular contact ball bearings
• Split inner ring
• Plain outer ring
• Plain inner ring
• Extended plain inner ring
19
Type 1

CRAFT Weight
(kg)
357234/3198750 35.000 72.000 34.000 42600 32100 0.580

DAC30620030 30.000 62.000 37.000 30520 2510 0.381
Type 2

CRAFT Weight
(kg)
3206B2RS1.CA014 30.000 62.000 23.800 28500 20200 0.290

5206KPP3.CA022 30.000 62.000 50.000 29000 20700 0.520
SL33032S 17.000 47.000 24.200 19600 12400 0.202
20
Type 3

CRAFT Weight
(kg)
SL52032T.CA007 16.195 40.000 39.120 44.120 14200 8800 0.220

SL52032T 16.195 40.000 39.120 44.120 14200 8800 0.220
21
INSERT BALL BEARINGS
Series Features
Type 1 • Insert ball bearings with lock collar ring
• Cylindrical bore
• Sealing with zinc coated steel shield
• Extended inner ring to both sides
• Extended inner ring to both sides
• Standard sealing
• RRB type seals
22
Type 1
Dimensions (mm) Basic Load

Ratings (N) Weight
CRAFT
(kg)
d SØD C B B1 S d2 Dyn. C Stat. C0
GRAE30NPPB.CA029 30.000 62.000 18.000 23.800 35.700 9.000 44.500 19500 11300 0.320
GRAE35NPPB.CA030 35.000 72.000 19.000 25.400 38.900 9.500 55.600 25700 15300 0.420
GRAE25NPPB.CA031 25.000 52.000 15.000 24.400 31.000 7.500 38.100 14000 7850 0.200
GRAE45NPPB.CA033 45.000 85.000 22.000 30.200 43.700 11.000 63.500 31600 20600 0.760
GRAE20NPPB.CA034 20.000 47.000 14.000 21.400 31.000 7.000 33.300 12800 6650 0.160
GRAE40NPPB.CA072 40.000 80.000 21.000 30.200 43.700 10.500 60.000 29500 18100 0.600
GRAE20NPPB 20.000 47.000 14.000 21.400 31.000 7.000 33.300 12800 6650 0.160
GRAE25NPPB 25.000 52.000 15.000 24.400 31.000 7.500 38.100 14000 7850 0.200
GRAE30NPPB 30.000 62.000 18.000 23.800 35.700 9.000 44.500 19500 11300 0.320
GRAE40NPPB 40.000 80.000 21.000 30.200 43.700 10.500 60.000 29500 18100 0.600
23
Type 2

Ratings (N) Weight
CRAFT
(kg)
d d1 SØD C B B1 S d2 Dyn. C Stat. C0
GE30KRRB.CA028 30.000 40.000 62.000 18.000 36.400 48.300 18.200 44.500 19500 1120 0.310
GE25KRRB.CA061 25.000 33.800 52.000 17.000 34.800 44.300 17.400 38.100 14000 7850 0.250
GE35KRRB.CA062 35.000 46.800 72.000 19.000 37.700 51.300 18.800 55.000 27500 15300 0.585
GE40KRRB.CA063 40.000 52.300 80.000 21.000 42.900 56.500 21.400 58.000 34500 19800 0.740
GE45KRRB.CA064 45.000 57.900 85.000 22.000 42.900 56.500 21.400 63.000 34500 20400 0.810
GE50KRRB.CA065 50.000 62.800 90.000 22.000 49.200 62.800 24.600 69.000 37500 23200 1.016
GE25KRRB 25.000 33.800 52.000 17.000 34.800 44.300 17.400 38.100 14000 7850 0.250
GE30KRRB 30.000 40.000 62.000 18.000 36.400 48.300 18.200 44.500 19500 1120 0.310
GE35KRRB 35.000 46.800 72.000 19.000 37.700 51.300 18.800 55.000 27500 15300 0.585
GE40KRRB 40.000 52.300 80.000 21.000 42.900 56.500 21.400 58.000 34500 19800 0.740
GE45KRRB 45.000 57.900 85.000 22.000 42.900 56.500 21.400 63.000 34500 20400 0.810
GE50KRRB 50.000 62.800 90.000 22.000 49.200 62.800 24.600 69.000 37500 23200 1.016
Type 3

Ratings (N) Weight
CRAFT
(kg)
d d1 SØD C B B1 d2 Dyn. C Stat. C0
LY2081082FSH.CA020 38.100 51.700 80.000 21.000 42.800 56.300 60.300 29600 18200 0.800
24
Type 4

Ratings (N) Weight
CRAFT
(kg)
d SØD C B B1 S d2 Dyn. C Stat. C0
GRAE20RRB.CA066 20.000 47.000 14.000 21.400 31.000 7.000 33.300 12800 6650 0.200
GRAE25RRB.CA067 25.000 52.000 15.000 24.400 31.000 7.500 38.100 14000 7850 0.250
GRAE35RRB.CA068 35.000 72.000 19.000 25.400 38.900 9.500 55.600 25700 15300 0.420
GRAE40RRB.CA069 40.000 80.000 21.000 30.200 43.700 10.500 60.000 29500 18100 0.600
GRAE30RRB.CA071 30.000 62.000 18.000 23.800 35.700 9.000 44.500 19500 11300 0.310
GRAE45RRB.CA073 45.000 85.000 22.000 30.200 43.700 11.000 63.500 31600 20600 0.760
GRAE20RRB 20.000 47.000 14.000 21.400 31.000 7.000 33.300 12800 6650 0.200
GRAE25RRB 25.000 52.000 15.000 24.400 31.000 7.500 38.100 14000 7850 0.250
GRAE30RRB 30.000 62.000 18.000 23.800 35.700 9.000 44.500 19500 11300 0.310
GRAE35RRB 35.000 72.000 19.000 25.400 38.900 9.500 55.600 25700 15300 0.420
GRAE40RRB 40.000 80.000 21.000 30.200 43.700 10.500 60.000 29500 18100 0.600
25
BEARING UNITS
Series Features
Type 1 • First generation bearing units
• Used for disc harrows
• Stamped steel housing
• Rectangular fixing bores
• Used for disc harrows
• Rectangular fixing bores
• Mostly used for disc harrows
• Round fixing bores
Type 4 • Set of insert bearing and 2 stamped steel housings
• One plate with lubricating hole
• One with none lubrication
• Square fixing bores
Type 5 • Set of stamped flanges for insert bearings
• One plate with lubricating hole
• One with none lubrication
• Square fixing bores
Type 6 • Set of double row ball bearing and shaft for agricultural machinery
26
BEARING UNITS
Type 1
Dimensions (mm)
CRAFT Weight
(kg)
d C B C1 N1xN2 K
ST491B 38.700 41.700 42.860 6.750 16,7x13,5 127.000 1.550
Type 2
Dimensions (mm)
CRAFT Weight
(kg)
A C B C1 N1xN2 K
FD209RM 29.970 41.700 42.860 6.750 16,7x13,5 127.000 1.600

FD211RM 38.890 49.210 50.800 7.500 17,5x13,5 139.700 2.250
27
BEARING UNITS
Type 3

CRAFT Weight
(kg)
d d1 C B C1 K Dyn. C Stat. C0
ST211 115/16.CA047 21.250 13.500 46.000 55.600 8.000 139.700 43500 29200 2.720
GWST211PPB20.CA048 55.5625 13.500 46.000 55.600 8.000 139.700 43500 29200 2.260
ST491A 45.000 13.500 41.700 42.800 6.750 127.000 1.450
ST740 55.570 13.500 45.000 55.600 7.000 141.300 2.000
Type 4

Ratings (N) Weight
CRAFT
(kg)
d d1 B B1 C1 N3 D1 D2 S Dyn. C Stat. C0
GRA30.CA025 30.000 33.000 23.800 35.700 5.000 11.000 113.000 90.500 9.000 19500 11300 0.410
28
BEARING UNITS
Type 5

Ratings (N) Weight
CRAFT
(kg)
SØD B B1 N3 D1 D2 S S1 Dyn. C Stat. C0
FLAN52MSB/FLAN52MSA.CA032 62.000 18.000 9.000 11.000 113.000 90.500 5.000 2.500 - - 0.150
Type 6

CRAFT Weight
(kg)
VP16/40/74.5 15.918 40.000 38.900 71.000 - - 0.182
29
SELF ALIGNING BALL BEARINGS
Series Features
Type 1 • Radial contact SELF aligning double row ball bearings
• Tapered inner bore
• Open type (no seals)
30
SELF ALIGNING BALL BEARINGS
Type 1

CRAFT Weight
(kg)
1207K.CA027 35.000 72.000 17.000 25700 15300 0.320
31
JOINT CROSS
540 r.p.m 1000 r.p.m. Dimensions, mm

Agricultural
CRAFT
PTO
KW CV Nm KW CV Nm D L D1 L1
CJC002 02 Size 12 16 210 18 24 175 22 54.8
CJC003 03 Size 16 22 290 24 32 230 23.8 61.2
CJC004 04 Size 22 30 390 35 47 330 27 70
CJC005 05 Size 26 35 460 40 55 380 27 74.5
CJC006 06 Size 35 48 630 54 74 520 30.2 80
CJC007 07 Size 46 62 810 73 100 700 30.16 92
CJC008 08 Size 55 75 980 85 115 810 30.16 106.3
CJC009 09 Size 68 92 1210 108 147 1030 35 106.3
CJC010 WA 05 Size 26 35 460 40 55 380 24 75 27 91
CJC011 WA 35 Size 44 60 790 72 98 690 27 76 32 94
CJC012 WA 36 Size 66 90 1180 102 139 980 32 89 36 106
CROSS REFERENCE
Agricultural
CRAFT
PTO
FKL WEASLER BINACCHI AKSAN KARDAN WALTERSHIED PRECISION LA MAGDALENA
CJC002 02 Size 05 1 W2100 812 403
CJC003 03 Size 08 AB2 B2 2 U341 840
CJC004 04 Size AB3 B3 813 406
CJC005 05 Size 12 AB4 B4 3,4 W2300 344AG 2140A
CJC006 06 Size AB5 B5 815
CJC007 07 Size AB6 B6 5,6 U331 2200A
CJC008 08 Size 7 U330 2220A
CJC009 09 Size 20 AB8 B8 8 U351
CJC010 WA 05 Size 200-7491 WW2380 621
CJC011 WA 35 Size 201-7694 WW2480 635
CJC012 WA 36 Size 200-7906 WW2580 636
32
CROSS REFERENCE
BRAND CRAFT PAGE BRAND CRAFT PAGE

204-XL-KRR 204KRR.CA039 11
FKL
207-KRR-AH03 207KRRAH03.CA042 11
203KRR.AH02 203KRRAH02.CA023 11 207KRRB-AH09 207KRRBAH09.CA043 12
203KRR.AH05 203KRRAH05.CA005 11 210-KRR-B-AH02 210KRRBAH02.CA044 12
204KRR2 204KRR2.CA011 11 GE25KRRB GE25KRRB.CA061 24
204KRRB2 204KRRB2.CA013 12 GE35KRRB GE35KRRB.CA062 24
306230 DAC30620030 20 GE40KRRB GE40KRRB.CA063 24
3206.B2RS1 3206B2RS1.CA014 20 GE45KRRB GE45KRRB.CA064 24
357234A 357234/3198750 20 GE50KRRB GE50KRRB.CA065 24
GWST211PPB20 GWST211PPB20.CA048 28 GRAE20RRB GRAE20RRB.CA066 25
LY 208-108 2F.SH LY2081082FSH.CA020 24 GRAE25RRB GRAE25RRB.CA067 25
SL52032T GRAE35RRB GRAE35RRB.CA068 25
SL 5203 2T 21
SL52032T.CA007 GRAE40RRB GRAE40RRB.CA069 25
SL 5316 2T SL53162T 14 SK014-205-KRR-B 205KRRBAH02.CA040 12
SLE 47-16S-2RS SLE4716S2RS 17 SK100-206-KRRB-AH11 206KRRBAH06.CA041 12
VP-16/40/74.5 VP16/40/74.5 29 SK102-207-KRR-B-AH10 207KRRBAH09.CA043 12
W 208PP16 W208PP16.CA009 11 W208PPB5 W208PPB5.CA070 12
FAFNIR FAG
203KRR2 203KRRAH02.CA023 11 36205B GE25KRRB.CA061 24

203KRR5 203KRRAH05.CA005 11 518855 203KRRAH02.CA023 11
204KRR 204KRR.CA039 11
JHB
204KRR2 A3409 204KRR2.CA011 11
204PY3 06C042Z 18 207KRRAH03 207KRRAH03.CA042 11
205KRR2 205KRRBAH02.CA040 12 208KRRB-AH05 208KRRB8.CA038 12
206KRR6 206KRRBAH06.CA041 12 JHB60102RSKC3 60102RS.CA026 13
207KRR9 207KRRBAH09.CA043 12
DIN
208KRRB8 208KRRB8.CA038 12
210PP7 210KRRBAH02.CA044 12 DIN625-1 60102RS.CA026 13
DHU 1 1/2R-209 ST491B 27
A DAC
DHU 1 1/2S-211 FD211RM 27
DHU 1 1/8S-209 FD209RM 27 SL52032T
DAC1640442 21
DHU 2 3/16R-211 GWST211PPB20.CA048 28 SL52032T.CA007
DHU1-1516R-211 ST211 115/16.CA047 28
PFI
DHU1-3/R4-209 ST491A 28
GW210PPB2 GW210PPB2.CA045 14 WIR208PPB8 W208PPB8 12
GW211PPB2 GW211PPB2.CA046 14 WIR210-31 WIR21031 11
W208PP21 W208PP16.CA009 11 WIR211-33 WIR21133 11
W208PPB5 W208PPB5.CA070 12
FERSA
W208PPB8 W208PPB8 12
W210PPB6 W210PPB6 12 A+S F16201 357234/3198750 20
W211PPB3 W211PPB3 15
PEER
W211PPB4 ST627 13
WIR210-31 WIR21031 11 204JY3 06C042Z 18
WIR211-33 WIR21133 11 204KRR2 204KRR2.CA011 11
WIR212-33 WIR21239 11 210PP20 210KRRBAH02.CA044 12
FD-209-1-1/8SQ FD209RM 27
INA
FD211-1 15/16RDC ST211 115/16.CA047 28
203-XL-KRR-AH02 203KRRAH02.CA023 11 FD211-1-1/2SQ FD211RM 27
203-XL-KRR-AH05 203KRRAH05.CA005 11 FD211-2 3/16RD GWST211PPB20.CA048 28
33
CROSS REFERENCE

YET207 GRAE35RRB.CA068 25
PEER
BCA
GW210KPPB2 GW210PPB2.CA045 14
GW211PPB2 GW211PPB2.CA046 14 203RRAR10 203KRRAH02.CA023 11
ST211x1-15/16 ST211 115/16.CA047 28 203RRAR8 203KRRAH05.CA005 11
ST491A ST491A 28 204FREN 06C042Z 18
ST491B ST491B 27 DS208TT5 W208PPB5.CA070 12
ST740 ST740 28 DS208TT8 W208PPB8 12
W208PPB8 W208PPB8 12 DS210TT6 W210PPB6 12
W211PPB3 W211PPB3 15 DS210TTR2 GW210PPB2.CA045 14
DS211TT3 W211PPB3 15
KOYO
DS211TTR2 GW211PPB2.CA046 14
4508A2TR18S W208PPB5.CA070 12 FD-209-RA ST491A 28
4510B2TR18S W210PPB6 12 FD-209-RE ST491B 27
88120A 204KRR2.CA011 11 FD-209-RM FD209RM 27
DG16452RD 06C042Z 18 FD-211-RM FD211RM 27
FD211RB GWST211PPB20.CA048 28
NTN
FD211RJ ST211 115/16.CA047 28
1AH04-11/16 204KRR2.CA011 11 FD211RJA ST211 115/16.CA047 28
1AS08-1.1/8 W208PPB5.CA070 12 FD211RJA-1 ST740 28
2AS08-1-1/8 W208PPB8 12 HPC011GPN 204KRR2.CA011 11
2AS10-1-1/8 W210PPB6 12 HPC104TPAN W208PP16.CA009 11
3AS11-1-1/2 W211PPB3 15 HPS104TR 208KRRB8.CA038 12
AEL206-102W3 ST491B 27
LINK BELT
FD211RB GWST211PPB20.CA048 28
SBX0890C4/L014 W208PP16.CA009 11 11KB204N 204KRR2.CA011 11
UEL205 GE25KRRB.CA061 24 126115 203KRRAH02.CA023 11
3AC10-1-15/16D1 GW210PPB2.CA045 14 24S3-211E3 W211PPB3 15
31RG3-210E3 GW210PPB2.CA045 14
SNR
GW211PP82 GW211PPB2.CA046 14
EX210 GE50KRRB.CA065 24
IHC
GB40582 357234/3198750 20
SN207NG GRAE35RRB.CA068 25 107095C91 203KRRAH05.CA005 11
611928R91 203KRRAH05.CA005 11
TIMKEN
666624R91 203KRRAH02.CA023 11
BP13043-A GW210PPB2.CA045 14
CLAAS
DS210TT6 W210PPB6 12
G1108KRRB LY2081082FSH.CA020 24 2114230 GE35KRRB.CA062 24
GRAE20RRB GRAE20RRB.CA066 25 212718 GE40KRRB.CA063 24
216428 GE45KRRB.CA064 24
SKF
216429 GE50KRRB.CA065 24
GWST211PPB40 ST740 28 2165580 GE35KRRB.CA062 24
ST-740 ST211 115/16.CA047 28 2334390 GRAE45NPPB.CA033 23
VKBA 857D 357234/3198750 20 2358690 62072RS.CA036 14
W208-PPB15 W208PPB5.CA070 12 2359160 6207.CA035 15
W210-PPB6 W210PPB6 12 2359520 1207K.CA027 31
YEL2052F GE25KRRB.CA061 24 238389 GE45KRRB.CA064 24
34
CROSS REFERENCE
SL52032T
CLAAS 324461A1 21
SL52032T.CA007
2442670 6207.CA037 15 326796 GRAE30NPPB.CA029 23
6104460 FLAN52MSB/FLAN52MSA.CA032 29 446612MI 5206KPP3.CA022 20
6104480 GRAE30NPPB.CA029 23 592141R91 204KRR2.CA011 11
6104490 GRA30.CA025 28 630210R91 W208PPB5.CA070 12
6160660 GRAE35NPPB.CA030 23 700703101 208KRRB8.CA038 12
6192860 GRAE20NPPB.CA034 23 747170 GW211PPB2.CA046 14
6363410 GRAE25NPPB.CA031 23 86974088 FLAN52MSB/FLAN52MSA.CA032 29
7347850 60102RS.CA026 13 F16246 203KRRAH02.CA023 11
9306490 GRAE35NPPB.CA030 23 ST3012A ST211 115/16.CA047 28
9390360 GRAE25NPPB.CA031 23 ST627A ST627 13
9397170 357234/3198750 20 ST740B ST740 28
T16288 W208PPB5.CA070 12
NH CNH
T25486 W208PPB8 12
357238 357234/3198750 20 T53781 GW210PPB2.CA045 14
385424 GE45KRRB.CA064 24 T57559 GW211PPB2.CA046 14
688425 GW211PPB2.CA046 14
AMAZONE
80135241 206KRRBAH06.CA041 12
80325103 GRAE25NPPB.CA031 23 CC010 3206B2RS1.CA014 20
84434989 GRAE25NPPB.CA031 23 SL52032T
Y0051390 21
84992001 GE25KRRB.CA061 24 SL52032T.CA007
NDAS4508BJ W208PPB5.CA070 12
LEMKEN
ST3012A ST211 115/16.CA047 28
737321R93 ST491A 28 3198563 203KRRAH05.CA005 11
3198702 203KRRAH05.CA005 11
KINZE
3198750 357234/3198750 20
G2-10003 205KRRBAH02.CA040 12 3198760 DAC30620030 20
GA2014 06C042Z 18
JOHN DEERE
SL52032T
GA6171 21
SL52032T.CA007 A-DS210TT6 W210PPB6 12
A-W210PP6 W210PPB6 12
GREAT PLANTS
AA21480 06C042Z 18
188-001V SL53162T 14 AA22097 205KRRBAH02.CA040 12
820-003C 06C042Z 18 AA30942 GWST211PPB20.CA048 28
SL52032T AE46606 W208PP16.CA009 11
822-170C 21
SL52032T.CA007 AE48913 LY2081082FSH.CA020 24
822-173С 204KRRB2.CA013 12 AE53290 210KRRBAH02.CA044 12
822-207C GWST211PPB20.CA048 28 AE54754 GW210PPB2.CA045 14
822-208C ST491B 27 AE74652 GW210PPB2.CA045 14
AH132823 GRAE35NPPB.CA030 23
MONOSEM
AH139296 GE35KRRB.CA062 24
SL52032T AH139297 GE40KRRB.CA063 24
7140A 21
SL52032T.CA007 AH203687 WIR21031 11
AN100348 206KRRBAH06.CA041 12
CASE IH
AN100425 203KRRAH02.CA023 11
156816C91 207KRRBAH09.CA043 12 AN102010 207KRRBAH09.CA043 12
195293C 205KRRBAH02.CA040 12 AN212132 SL52032T.CA007 21
30730 GRAE30NPPB.CA029 23 AN281357 203KRRAH02.CA023 11
AZ1004 GE25KRRB.CA061 24
35
CROSS REFERENCE
JOHN DEERE KVERNELAND
GRAE35NPPB.CA030 AC 562134 203KRRAH05.CA005 11

AZ19427 23, 25
GRAE35RRB.CA068 AC671871 204KRR.CA039 11
GZ379381 ST211 115/16.CA047 28
SUNFLOWER
JD10020 LY2081082FSH.CA020 24
JD10089 207KRRAH03.CA042 11 24A5301 W208PPB5.CA070 12
JD10384 GE30KRRB.CA028 24 SN3215 ST491A 28
JD10456 GE45KRRB.CA064 24
KRAUSE
JD39102 GRAE25NPPB.CA031 23
JD39103 GRAE30NPPB.CA029 23 1934-12-0 ST491B 27
JD39104 GE35KRRB.CA062 24 40-109 ST491B 27
JD39105 GE25KRRB.CA061 24 40-121 GW211PPB2.CA046 14
JD39106 GE30KRRB.CA028 24 CB-66A GW211PPB2.CA046 14
JD39107 GE40KRRB.CA063 24 ST3027 ST491B 27
REMLINGER
JD7126 204KRR2.CA011 11 RB-0007 ST491A 28
JD9214 203KRRAH02.CA023 11
TALBOT
JD9248 W208PPB5.CA070 12
JD9249 206KRRBAH06.CA041 12 T151 W208PPB8 12
JD9260 205KRRBAH02.CA040 12
TOWNER
JD9295 203KRRAH05.CA005 11
JD9301 207KRRAH03.CA042 11 7906 MOD. RINGER W208PPB8 12
JD9313 206KRRBAH06.CA041 12
AMCO
JD9373 208KRRB8.CA038 12
JD9434 LY2081082FSH.CA020 24 10272 W208PPB5.CA070 12
JD9454 WIR21031 11 10333 W208PPB8 12
JD9490 GE25KRRB.CA061 24
BURCH
ST211 115/16.CA047
PMFD21RRB 28
ST740 203214 W211PPB3 15
20482 W210PPB6 12
MACHIO GASPARDO
J9373 W208PPB5.CA070 12
F04100040 VP16/40/74.5 29
OTHER
G14830390 SLE4716S2RS 17
10,5 T/33/MIN EZ410WSS 13
MASSEY FERGUSSON
14-5-109 GW210PPB2.CA045 14
1577800M1 208KRRB8.CA038 12 1R41009 W208PPB5.CA070 12
1905666M1 W208PPB5.CA070 12 261750 W208PPB5.CA070 12
412260M1 GE25KRRB.CA061 24 2J516 W208PPB5.CA070 12
831960M3 GW210PPB2.CA045 14 3166054R91 GE35KRRB.CA062 24
832540M1 W211PPB3 15 3J131 W211PPB3 15
D41705700 GE45KRRB.CA064 24 40-121 GW211PPB2.CA046 14
PS01102 204KRR2.CA011 11 4404-P W211PPB3 15
454113R91 LY2081082FSH.CA020 24
HORSCH
56345058 VP16/40/74.5 29
00240199 06C042Z 18 664073R92 LY2081082FSH.CA020 24
00310104 06C042Z 18 664175R92 LY2081082FSH.CA020 24
7377-1 W211PPB3 15
84330044 LY2081082FSH.CA020 24
36
CROSS REFERENCE

KENT FC2286 GWST211PPB20.CA048 28
OTHER
MNS0049684 EZ410WSS 13
ALLICE71502203 06C042Z 18 MNS0056119 EZ410WSS 13
AMCO G10771 GW210PPB2.CA045 14 MULCB112SG W211PPB3 15
B92627 GE35KRRB.CA062 24 PN00035 VP16/40/74.5 29
B92665 GE35KRRB.CA062 24 PN00053 EZ410WSS 13
CB-66A GW211PPB2.CA046 14 TWS210BR GW210PPB2.CA045 14
EZDG108 EZ410WSS 13 TYE 522-20SP 203KRRAH05.CA005 11
G0052604 W208PPB5.CA070 12 WHITE852270 06C042Z 18
G1108KRRB LY2081082FSH.CA020 24 WILRICH24022 GW211PPB2.CA046 14
GA15 W208PPB5.CA070 12 b7980 W208PPB5.CA070 12
GK260 W208PPB5.CA070 12
GOST256708 DAC30620030 20
37
SHORT KEY TABLE
SHORT KEY CRAFT SHORT KEY CRAFT

CA005 203KRRAH05.CA005 CA041 206KRRBAH06.CA041
CA007 SL52032T.CA007 CA042 207KRRAH03.CA042
CA009 W208PP16.CA009 CA043 207KRRBAH09.CA043
CA011 204KRR2.CA011 CA044 210KRRBAH02.CA044
CA013 204KRRB2.CA013 CA045 GW210PPB2.CA045
CA014 3206B2RS1.CA014 CA046 GW211PPB2.CA046
CA020 LY2081082FSH.CA020 CA047 ST211 115/16.CA047
CA022 5206KPP3.CA022 CA048 GWST211PPB20.CA048
CA023 203KRRAH02.CA023 CA061 GE25KRRB.CA061
CA025 GRA30.CA025 CA062 GE35KRRB.CA062
CA026 60102RS.CA026 CA063 GE40KRRB.CA063
CA027 1207K.CA027 CA064 GE45KRRB.CA064
CA028 GE30KRRB.CA028 CA065 GE50KRRB.CA065
CA029 GRAE30NPPB.CA029 CA066 GRAE20RRB.CA066
CA032 FLAN52MSB/FLAN52MSA.CA032 CA069 GRAE40RRB.CA069
CA033 GRAE45NPPB.CA033 CA070 W208PPB5.CA070
CA035 6207.CA035 CA072 GRAE40NPPB.CA072
CA036 62072RS.CA036 CA073 GRAE45RRB.CA073
CA037 6207.CA037 CA074 6208.CA074
CA038 208KRRB8.CA038 CA075 6204.CA075
CA039 204KRR.CA039 CA077 6205.CA077
CA040 205KRRBAH02.CA040 CA079 6206.CA079
38
NOTES
39
NOTES
40
The contents of this catalog are subjected to change without prior notice.
Every possible effort has been made to ensure that the data herein is correct;
however, CRAFT bearings cannot assume any liability for any direct, in director
consequential damages arising from the use of the information specified here.
CRF 3/18/EN

Catalogo Agricola Craft 2020

Uploaded by

Copyright:

Available Formats

Catalogo Agricola Craft 2020

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalogo Agricola Craft 2020

Uploaded by

Copyright:

Available Formats

CONTENT

CRAFT BEARINGS QUALITY CONTROL 5 Type 1 20

DEEP GROOVE BALL BEARINGS 9 INSERT BALL BEARINGS 22

Type 15 18 JOINT CROSS 32

CRAFT bearings Quality Control Laboratory

Roughness, Roundness and Form analysis

Noise and vibration testing for bearings

Hardness Testing for bearings

Axial & Radial Internal Clearance testing for bearings

Materials testing for bearings rings and rolling elements

Dimension measuring for bearings parts

Bearing life and grease leakage testing

Dimensions (mm) Basic Load Ratings (N)

WIR21031 49.212 90.000 20.000 49.212 0.715

Dimensions (mm) Basic Load Ratings (N)

W208PP16.CA009 31.780 80.000 18.000 36.500 29500 18100 0.670

Dimensions (mm) Basic Load Ratings (N)

204KRRB2.CA013 17.653 47.000 14.000 20.955 12800 6650 0.150

Dimensions (mm) Basic Load Ratings (N)

W208PPB8 29.972 80.000 30.175 36.520 32650 16250 0.670

Dimensions (mm) Basic Load Ratings (N)

ST627 55.562 100.000 100.500 33.340 55.562 - - 1.100

Dimensions (mm) Basic Load Ratings (N)

60102RS.CA026 50.000 80.000 16.000 22020 16250 0.260

Dimensions (mm) Basic Load Ratings (N)

62072RS.CA036 35.000 72.000 17.000 25670 15300 0.274

Dimensions (mm) Basic Load Ratings (N)

GW210PPB2.CA045 49.225 90.000 30.175 35000 23200 1.500

Dimensions (mm) Basic Load Ratings (N)

6207.CA035 35.000 72.000 17.000 25670 15300 0.273

Dimensions (mm) Basic Load Ratings (N)

W211PPB3 38.890 100.000 33.340 9740 5850 1.207

Dimensions (mm) Basic Load Ratings (N)

1580204 20.000 47.000 15.000 9800 6650 0.102

Dimensions (mm) Basic Load Ratings (N)

1680204 20.000 52.000 16.000 29.000 10800 8000 0.231

Dimensions (mm) Basic Load Ratings (N)

380708 40.000 85.000 23.000 39.000 25000 20400 0.800

Dimensions (mm) Basic Load Ratings (N)

SLE4716S2RS 16.400 47.000 12.000 25.000 81000 52000 0.110

Dimensions (mm) Basic Load Ratings (N)

06C042Z 16.027 42.225 15.400 18.672 - - 0.132

Dimensions (mm) Basic Load Ratings (N)

SKE17204KRRB 17.000 47.000 14.000 17.700 13600 6600 0.120

Dimensions (mm) Basic Load Ratings (N)

357234/3198750 35.000 72.000 34.000 42600 32100 0.580

Dimensions (mm) Basic Load Ratings (N)

3206B2RS1.CA014 30.000 62.000 23.800 28500 20200 0.290

Dimensions (mm) Basic Load Ratings (N)

SL52032T.CA007 16.195 40.000 39.120 44.120 14200 8800 0.220

Dimensions (mm) Basic Load

Dimensions (mm) Basic Load

Dimensions (mm) Basic Load

Dimensions (mm) Basic Load

ST491B 38.700 41.700 42.860 6.750 16,7x13,5 127.000 1.550

FD209RM 29.970 41.700 42.860 6.750 16,7x13,5 127.000 1.600

Dimensions (mm) Basic Load Ratings (N)

Dimensions (mm) Basic Load

Dimensions (mm) Basic Load

Dimensions (mm) Basic Load Ratings (N)