ELEVATE YOUR ELECTRONICS

Fleming Yachts 65. @seaviewglobal

www.seaviewglobal.com
Seaview Tapered Mast.
Image courtesy of Fleming Yachts.
ELEVATE YOUR ELECTRONICS
Seaview is the global leader in designing and manufacturing mounting solutions for marine electronics. Seaview
offers hundreds of installation options for optimal positioning of radar, satellite and tv domes, GPS, VHF, camera,
searchlights and navigation lights. Seaview mounting solutions will not only provide unmatched strength and
durability but look elegant, complementing the styling of your boat.

Working closely with all major electronic manufacturers, we offer an innovative range of high quality products
for powerboats, sailboats, yachts, commercial and military vessels. While we offer a comprehensive selection of
standard mounts, we also offer personalized mast solutions where the standard mounts may not be suitable. You
will find Seaview mounting systems aboard many of the finest yachts around the world.

MARINE ELECTRONICS ARE ALWAYS EVOLVING,

PLEASE REFER TO OUR MOST CURRENT CATALOG
UPDATES USING THE PROVIDED QR CODE OR GO TO
WWW.SEAVIEWGLOBAL.COM//DOWNLOADS

Seaview supporting the world’s leading marine electronic manufacturers!

See what they have to say on pages 39 and 40!

1
SEAVIEW
TABLE OF CONTENTS
MODULAR MOUNTS INSTRUMENT MOUNTS
Single Mounts ................................................................. 7-8 Sail Instrument Pods ...................................................... 29

Dual Mounts ................................................................. 9-10 Deck Instrument Pods .................................................... 30

Top Plates ......................................................................... 11 Sail, Deck & Rail Pod Reference Guide ......................... 31

Light Bars & Light Bar Tops ...................................... 12-13 Rail Instrument Pods ...................................................... 32

Modular Mount Accessories .......................................... 14

CABLE GLAND
POWER BOAT MOUNTS Cable Gland ................................................................ 33-34

Tapered Masts ........................................................... 15-16

PERSONALIZED OPTIONS
Stainless Steel Mounts ................................................... 18
Personalized Mast Options ...................................... 35-38
Low Profile Satdome Adapters ................................ 19-20
Commercial Masts .......................................................... 39
Direct Mount Wedges ..................................................... 23
MANUFACTURER TESTIMONIALS
CAMERA & SEARCH LIGHT MOUNTS Manufacturer Testimonials ...................................... 41-42
Camera & Search Light Mounts ................................ 21-22

SAILBOAT MOUNTS
Mast Mounts ........................................................ 22, 25-26

Pole Mounts ............................................................... 27-28

“Seaview worked closely with us to supply

a mast with our fairly extensive custom
modification requests.”

Gary Johnson
Applied Engineering Manager
Navatek Ltd.

Image courtesy of Navatek Ltd.

(Custom Seaview mast made for Navatek Ltd.) 2
“We rig them to be “dream boats” with every conceivable
option and technology. Seaview’s flexible line of
electronics mounting solutions makes it easy to fit our
full system including radar, satellite TV and thermal night
vision. Their customizable masts and mounts are rugged,
(Seaview PMA-DM2-M2 & ADAR1DMLTB shown.)

reliable and they look fantastic too. They blend seamlessly

with the design of today’s modern sport-fishing boats and
look totally built-in, not bolt-on. That’s really appreciated
by the boat builders we work with on these projects too.”
Image courtesy of Raymarine.

Jim McGowan
Americas Marketing Manager
FLIR Maritime and Raymarine

3
HERE’S WHY YOU SHOULD
CHOOSE SEAVIEW
Raw Aluminum

Chem-film powder coat

PERFORMANCE DURABLE MODULAR DESIGN

Seaview mounts will properly Unlike any other mount Simple 3 step system to choose
elevate your electronics to available, Seaview takes the your Seaview mount and
eliminate interference, safely finish to another level. We accessories. Visit the website for
clear those on board and Chem-Film (same process used a simple selector guide.
encourage longevity of the by Boeing) each high grade 1. Pick Mount Style
electronics. aluminum part prior to our 2. Select Top Plate
standard 3 part epoxy prime and 3. Choose Accessories
powder coat to ensure the best
possible finish and corrosion
resistance.

SPACE SAVING
Compact Seaview mounts
help you get all of your marine
electronics with one simple
solution. Small footprints and
one center hole for wiring point
HIGH QUALITY
of entry. Our Robotic Welding provides maximum efficiency while producing
consistently superior welds. The Lincoln Fanuc 55E Single Station,
AM120iC/12L with 6 axis robotic arm and 2 axis turntable was specifically
programmed to weld our Seaview products.

This robot is operated by our very experienced welding team,

manufacturing our Seaview products for stock, commercial and military
applications including OEM parts.

4
“Monterey Boats exclusively uses Seaview mounts
for all of their sport yachts and enjoys the quality and
relationship they have with Seaview.”

Mark Owens
Vice President of Design & Engineering
Monterey Boats

(Seaview PMA-57-M1 and LTB-R shown.)

Image courtesy of Monterey Boats.

5 MODULAR MOUNTS
FOR RADARS, THERMAL CAMERAS, SATDOMES & SEARCHLIGHTS
MODULAR MOUNTS
EASY 3 STEP SOLUTION
STEP 1 Choose Mount Style & Height
Pages 7 - 10
REQUIRED

STEP 2 Select Modular Top Plate

Page 11
REQUIRED

Modular Mount

Top Plate

LED Light

STEP 3 Pick Optional Accessories

Page 12 - 14
OPTIONAL

Light Bar

Spreader Kit

LED Spreader Light Kit

MODULAR MOUNTS 6
STEP 1
CHOOSE A MODULAR MOUNT
SATDOME
FORWARD LEANING Fits RADAR
• 18” - 25” closed dome radars
• 16” diameter or smaller satdomes
• 10” tall mounts are not to be used with
E B
open array radars

A D

C A
A B C&D E
Model # inch /mm inch /mm inch /mm inch /mm

PMF-57-M1 7 / 177.8 5 / 127 5 / 127 .5 / 12.7

PMF-107-M1 7 / 177.8 10 / 254 5 / 127 .5 / 12.7

SATDOME
RADAR
Fits
AFT LEANING
• 18” - 25” closed dome
radars
• 16” diameter or smaller E B
satdomes
• 10” - 36” tall mounts A D
are not to be used with
open array radars
C A
A B C&D E
Model # inch /mm inch /mm inch /mm inch /mm

PMA-57-M1 7 / 177.8 5 / 127 5 / 127 .5 / 12.7

PMA-107-M1 7 / 177.8 10 / 254 5 / 127 .5 / 12.7

PMA-167-M1 7 / 177.8 16 / 406.4 5 / 127 .5 / 12.7

PMA-247-M1 7 / 177.8 24 / 609.6 5 / 127 .5 / 12.7

PMA-367-M1 8 / 203.2 36 / 914.4 6.5 / 165.1 .5 / 12.7

VERTICAL
SATDOME
RADAR
Fits
• 18” - 25” closed dome radars E

• 24” diameter or smaller B

satdomes D
• Not to be used with open
array radars
A C
A B C&D E
Model # inch /mm inch /mm inch /mm inch /mm
AM5-M1 8 / 203.2 5 / 127 4.77 / 121.2 0.5 / 12.7

AM12-M1 8 / 203.2 12 / 304.8 4.77 / 121.2 0.5 / 12.7

AM18-M1 8 / 203.2 18 / 457.2 4.77 / 121.2 0.5 / 12.7

7 MODULAR MOUNTS
 OPEN ARRAY & LG SATDOME MOUNTS

OPEN ARRAY RADAR

SATDOME

Fits
• 16” - 24” diameter satdomes
• Available in Aft leaning E
• Up to 6’ Open Array Radar
A D B

C A
A B C&D E
Model # inch /mm inch /mm inch /mm inch /mm

PMA-57-M1 7 / 177.8 5 / 127 5 / 127 0.5 / 12.7

PMF-57-M1 (FWD Leaning) 7 / 177.8 5 / 127 5 / 127 0.5 / 12.7

PMA-1210-M2 10 / 254 12 / 304.8 8.5 / 215.9 0.5 / 12.7

PMA-1810-M2 10 / 254 18 / 457.2 8.5 / 215.9 0.5 / 12.7

“Seaview removes the engineering

and fabrication headaches
associated with mounting marine
electronics while providing extremely
high quality, great looking products.”

Travis Duffield
Vice President
Duffield Yachts

Duffield 58.
Image courtesy of Duffield Yachts.
(Seaview PMADM2M2, ADAS2, LTBSF & LTBP1197 shown)
MODULAR MOUNTS 8
STEP 1
CHOOSE A MODULAR MOUNT
PMA-DM1-M2 Must choose top plate,
RADAR
SATDOME CAMERA sold separately
Fits
• 18” - 25” closed dome radars
Universal plate for all
• 16” - 24” satdomes closed dome radars
13.25“
• Cameras
3.88”
• Spotlights
10”

Comes with Seaview 8.5”

Cable Gland for
water tight radar 10” 8.5”
cable entry into
the mast.
0.5”

Must choose top plate,

PMA-DM124-M2 sold separately
SATDOME CAMERA
RADAR
Fits Universal plate for all
• 18” - 25” closed dome radars closed dome radars

• 16” - 18” satdomes

• Cameras 33”
• Spotlights 24”

8.5”
6”

8.5” 6”

0.5”

Must choose top plate,

PMA-DM2-M2 OPEN ARRAY RADAR
sold separately
SATDOME
Fits
• Up to 4.5’ open array
radars
Universal plate
• 16” - 24” satdomes 23.75” for all open array
radars up to 4.5’
• Cameras
• Spotlights 5.38”

10”
Comes with Seaview 8.5”
Cable Gland for
water tight radar 10” 8.5”
cable entry into
the mast.
9 MODULAR MOUNTS 0.5”
 Must choose top plate,
sold separately
PMA-DM3-M1
OPEN ARRAY RADAR
SATDOME
Fits Universal plate for
open array radars up
• Up to 4.5’ open array radars to 4.5’
27.75”
(radar plate included)
• 16” - 18” satdomes

6.5”

10”

8.5”

10” 8.5”

0.5”

PMA-DM4-M1 RADAR
SATDOME CAMERA

Fits
33.5” Must choose top plate,
• 18” - 25” closed dome sold separately
radars
Universal plate for all
• 16” - 24” satdomes closed dome radars
(radar plate included)
• Cameras 19”

• Spotlights 6.75”

10”
8.5”

10” 8.5”

0.5”

Key
1” = 25.4mm

SOUTHPORT 33DC.
Image courtesy of Southport Boats.
(Seaview PMADM1M2, ADAS1, SP2MOD & LTBS shown)
MODULAR MOUNTS 10
STEP 2
SELECT A TOP PLATE
NOTE: If you have selected a modular mount ending in “M1” use the M1 column below. Mounts ending in “M2” use
M2 column.

M2 fits modular mounts ending in

M1 fits modular mounts ending in
M2. Example: PMA-DM1-M2
M1. Example: PMA-57-M1

M1 M2 Light Bar M1 M2 Light Bar

ACR LOWRANCE
RCL50B, RCL75, RCL85, RCL95, RCL100, RCL1000 ADA-BLANK ADA-BLANK LTB13 3G, 4G radar domes ADA-R1 ADAR1DMLTB LTB-R
RCL300 CALL CALL CALL LORENZ
COMNAV 12" - 24" radar domes ADA-R1 ADAR1DMLTB LTB-R
Explorer V2/V3 ADA-F1 ADA-F1 LTB-S LTB-OA
4' - 6' open array radar ADA-R1 ADAR1DMLTB or
FLIR LTB-OA-6
MD324, MD625, M324XP, M324L, M324S,
M324CS, M625XP, M625L, M625S, M625CS, ADA-F1 ADA-F1 LTB13
RAYMARINE
M612L, M617CS, M618CS, T200, T300, T400 RD418D, RD418HD, RD424D,
ADA-R1 ADAR1DMLTB LTB-R
M132, M232 Series (Hiko) ADA-F2 ADA-F2 LTB13 RD424HD, Quantum, Quantum 2

M300C, M332, M364, M364C and M364C LR ADA-F3 ADA-F3 LTB-S RA1048(S)HD, RA3048(S)HD,
ADA-R1 CALL LTB-OA
Magnum 4’
FURUNO
RA1072(S)HD, RA3072(S)HD,
ADA-R1 CALL LTB-OA-6
SC30, SC703, SC1303, DRS4DL, DRS4D, DRS4D- Magnum 6’
ADA-R1 ADAR1DMLTB LTB-R
NXT
33STV ADA-S1 ADA-S3 LTB-S
LTB-OA
37STV ADA-S1 ADA-S1 LTB-S
DRS6A-NXT ADA-R1 ADAR1DMLTB or
LTB-OA-6 45STV ADA-S2 ADA-S2 LTB-S
Open array radar 1942 ADA-R2 ADAR1DMLTB LTB-OA 60STV ADA-S2 ADA-S2 LTB-S24
GARMIN SEA-TEL (COBHAM)
FANTOM18, GMR18(HD), GMR18x(HD) ADA-R1 ADAR1DMLTB LTB-R ST14, FX150 (16.5”) ADA-S2 ADA-S2 LTB-S24
FANTOM24, GMR24(HD), GMR24x(HD) ADA-R1 ADAR1DMLTB LTB-R C18, FX250 (24”) ADA-S2 ADA-S2 LTB-S24
LTB-OA SIMRAD
Fantom, 4'-6' open array radar ADA-R1 ADAR1DMLTB or
LTB-OA-6 3G, 4G, HALO20(+), HALO24 ADA-R1 ADAR1DMLTB LTB-R
DX64S ADA-R2 N/A LTB-R
GLOMEX
TX06S ADA-R1 ADAR1DMLTB LTB-OA
20” - 27” Satdome ADA-S1 ADA-S2 LTB-S24
TX10S ADA-R1 ADAR1DMLTB LTB-OA6
Pandora ADA-S3 ADA-S3 LTB-S
ADA-R1 LTB-OA
HUMMINBIRD 4' - 6' Halo™ open array radar + N/A or
HB2124 Chirp Radar ADA-R1 ADAR1DMLTB LTB-R ADA-HALO-3 LTB-OA-6
LTB-OA LTB-OA
RH44, RH45 4’ - 6’ open array radar ADA-R1 ADAR1DMLTB or 4’ - 6’ RB series open array radar ADA-R1 ADAR1DMLTB or
LTB-OA-6 LTB-OA6
INTELLIAN SITEX
i2 (FB150 in i2 matching dome) ADA-S1 ADA-S3 LTB-S 18" (T760/T921) radar domes ADA-R1 ADAR1DMLTB LTB-R
i3 (FB150 in i3 matching dome) ADA-S1 ADA-S1 LTB-S 24” (MDS12) radar ADA-R1 ADAR1DMLTB LTB-R
i4, i4P (FB150 in i4 matching dome) ADA-S2 ADA-S2 LTB-S 24” (T761) radar domes ADA-R2 N/A LTB-R
i5 ADA-S2 ADA-S2 LTB-S24 25” radar domes ADA-R1 ADAR1DMLTB LTB-R
i6, i6P, S6HD, FB500 ADA-S2 ADA-S2 LTB-S24 LTB-OA
FB150, FB250 ADA-S4 ADA-S4 LTB-S 4'-6' open array radar ADA-R1 ADAR1DMLTB or
LTB-OA-6
JRC
THRANE & THRANE
15" radar domes ADA-R1 ADAR1DMLTB LTB-R
FB150, FB250, Fleet 33, 33+ ADA-S4 ADA-S4 LTB-S
24" radar domes ADA-R2 ADAR1DMLTB LTB-R
Sailor FB500, Fleet 55+ ADA-S1 ADA-S3 LTB-S24
KODEN
18" - 25" radar domes ADA-R1 ADAR1DMLTB LTB-R
LTB-OA
4' - 6' open array radar ADA-R1 ADAR1DMLTB or Seaview Top Plates
LTB-OA-6
now come with the
KVH
drill template stamped
M1DX, M1, TV1, LTE-1 ADA-S1 ADA-S3 LTB-S
M2, M3, M3DX, M3ST, V3, V3-IP, TV3 ,V3-HTS ADA-S1 ADA-S1 LTB-S
on the top plate to
M5, TV5, FB250 (18”) ADA-S2 ADA-S2 LTB-S make for very easy
M7, M7SK, HD7, V7, TV6, FB500(26”), F55, V3-IP(24”) ADA-S2 ADA-S2 LTB-S24 installation
V7-IP ,V3-HTS (24”) 8.49”x8.49” bolt pattern CALL CALL CALL
(no more lose drill
FB150(10.8”), FB250(14”), Fleet One, Fleet33 ADA-S4 ADA-S4 LTB-S template)!

11 TOP PLATES
STEP 3
CHOOSE OPTIONAL ACCESSORIES
LIGHT BARS LTB-SF
A 2” diameter Light Bar designed
to work with search lights. Contact
Seaview directly to make sure this
light bar is right for your boat. Not
intended for fast ocean going boats.
Will not work with 24” satdomes.
This will clear 20” satdomes or
smaller.

LTB-SF2
A 2” diameter Light Bar designed to
work with FLIR M100/M200
Series. Contact Seaview directly to
make sure this light bar is right for
LTB-R
your boat. Not intended for fast
For 18” - 24” closed dome radars.
ocean going boats. Will not work
This light bar can fold over 90º.
with 24” satdomes. This will clear
20” satdomes or smaller.

LTB13
A 1.25” Light Bar 14” tall for FLIR
cameras and Searchlights. Can fold
over 90º.

Note that Light Bars do not

come with a light. Select a
LTB-S Light Bar top for your Light
For 20” or smaller satdomes. This LTB90
Bar on page 13. Bolt on kit that allows you to quickly
light bar can fold over 90º.
fold over the Light Bar without any
LTB-S24 tools.
For 26” or smaller satdomes. This This kit will only work with Seaview
light bar can fold over 90º. top plates ADAR1, ADAS1 & ADAS2.
Contact Seaview if this is needed
for another application.

LTB-OA
For open array radars up to 4½’.

LTB-OA-6
For 6’ open array radars. LIGHT BARS 12
STEP 3
CHOOSE OPTIONAL ACCESSORIES
LIGHT BAR TOPS

LTBP-1197 LTBP-1697 LTB-BOX LTB-BOX-W

Perko 1197 Incandescent Perko 1697 LED (4”x4½”) Black Box Top to (4”x4½”) White Box Top
Combination Masthead Combination Masthead fit three navigation lights to fit three navigation
/ White All-Round Light / White All-Round Light or similar. Note that this lights or similar. Note
with 7’ of wire (12v). Can with 7’ of wire (12v). does not come with lights. that this does not come
be converted to 24v with with lights.
Perko Bulb 0072001CLR.

LTB-U1A PM-U2A LTB-U LTB-U-SS

(2½”x7”) Allows you to Allows you to mount a Adapter to mount a GPS Stainless steel adapter
mount a single light or single light and two GPS or wind transducer. The to mount a GPS or wind
a GPS and a light. Lights units. Light and GPS not threads are 1-14. transducer. The threads
and GPS not included. included. are 1-14.

LIGHT BAR ACCESSORIES

PM-114LT-LED
LED Floodlight kit (9-33v).
For Seaview 1¼” diameter
light bars. Includes 1¼”
LTBU1A1697 LTBU1A1197 stainless steel clamp,
Perko 1697 LED nav light Perko 1197 incandescent
mounting hardware &
on a 12.75” post with nav light on a 12.75” post
Hella 0670 Sea Hawk LED
7’ of wire (12v). USCG with 7’ of wire (12v). USCG
Floodlight.
approved for boats up approved for boats up
to 20 meters (65.6’) in to 20 meters (65.6’) in
length. 1-14 threads for length. 1-14 threads for
GPS or similar. GPS or similar.

13 LIGHT BAR TOPS

STEP 3
CHOOSE OPTIONAL ACCESSORIES
SPREADER KITS

D
B

SP2-MOD
A
SP1-MOD
C

SP1-MOD
Fits all Seaview mounts that end in A B C D
Part # inch / mm inch / mm inch / mm
“M1”. For example PMA-57-M1. SP1-MOD 42.4 / 1077 12.625 / 320.67 1.75 / 44.45 25°
SP2-MOD SP2-MOD 44.5 / 1130.3 14.282 / 362.76 1.75 / 44.45 25°

Fits all Seaview mounts that end in

“M2”. For example PMA-DM2-M2.

SPREADER KIT ACCESSORIES Do NOT use 4’ or taller fiberglass

antennas on nylon or plastic
SP-LT-LED Enhance your visibility
adapters! 4’ or smaller stainless
with a Seaview spreader LED steel whip antennas ok. If you need
floodlight kit. This kit includes to mount 4’ or taller fiberglass
antennas you must use this stainless
stainless steel bracket, mounting steel 1-14 threaded insert.
hardware & Hella 0670 Sea Hawk (Sold separately, part #SP7-SS)
LED Floodlight. (9-33v)

Part # Description
For 7”x7” base plate.
BASE WEDGES HINGE ADAPTERS
PM-H7 Fits 5” - 24” tall radar
mounts.
Most common planing attitude requires 3-4° of For 8”x8” base plate.
Captive knobs means these will PM-H8 Fits 36” tall radar
adjustment. If you are unsure which to choose then mounts.
stay with the hinge when it’s
we recommend the 4° wedge. We do however offer For 10”x10” base
open or closed. plate. Not to be used
2° & 6° wedges if you feel a little more or a little less is PM-H10 for PMA-DM2-M2
better for your application. or PMA-200 series
mounts.

C B
A
A B C
Part # Angle of Wedge inch / mm inch / mm inch / mm
PM-W2-7 2° 7 / 177.80 0.37 / 9.37 0.125 / 3.18
The hinge adapter can hinge
PM-W4-7 4° 7 / 177.80 0.61 / 15.6 0.125 / 3.18
PM-W6-7 6° 7 / 177.80 0.86 / 21.87 0.125 / 3.18
back 180°. Allowing you to have
PM-W4-8 4° 8 / 203.20 0.68 / 17.37 0.191 / 4.84
the most clearance possible.
PM-W4-10 4° 10 / 254 0.95 / 24.13 0.25 / 6.35

SPREADER KITS, WEDGES & HINGES 14

TAPERED MASTS
FOR MOST CLOSED & OPEN ARRAY RADARS

PMA-100S and PMA-BC-37S come with

Removeable Spreaders Seaview Cable Gland for water tight
radar cable entry into the mast.
All Seaview Tapered Masts feature removeable
spreaders for easier shipping. Standard 1-14 threaded
fittings are used on the spreaders and are made out of
nylon to eliminate corrosion.

For Just About Any Radar

Three different models are available to fit just about any
marine electronic combination.

High Visibility
Mounting plate for lights on all Seaview Tapered Masts.
Example shown on PMA-200 image.

If you plan to use 4’ or taller antennas on the spreaders PMA-100S

you should use a stainless steel adapter (SP7-SS) shown Mounting plate will accept most standard 18” and 24”
below. radar domes.

PMA-BC-37S PMA-200
Mounting plate will accept most standard 18” and 24” Mounting plate will accept most open array radars up
radar domes. Features a welded platform for cameras to 41⁄2 feet. Comes with a 10”x10” backing plate.
or search lights.

Do NOT use 4’ or taller fiberglass

antennas on nylon or plastic adapters! 4’
or smaller stainless steel whip antennas
ok. If you need to mount 4’ or taller
fiberglass antennas you must use this
stainless steel 1-14 threaded insert.
(Sold separately, part #SP7-SS)

PMA-BC-37S pictured above.

15 TAPERED MASTS
DIMENSIONS Key
1” = 25.4mm

34.5”
29.88” 26” 29.88”
21” 21”
65° 12.75” 65° 65°
8”
10” 10” 10”
5.38”
8.5”
8.5” 10” 8.5” 41.6”
10”8.5” 41.6”
10” 8.5” 41.75” 0.5”
0.5”
0.5”
PMA-200
PMA-100S
PMA-BC-37S

“Back Cove Yachts offers 5 different models and produces

60+ boats per year. We require parts and materials to be
delivered on a schedule and be of excellent quality. We
have been able to rely on Seaview to deliver the parts we
need, when we need them and maintain the quality levels
we expect. Seaview has remained a significant source in
our supply chain. In part because of the reasons mentioned
above, but also due to outstanding customer service
and engineering support. We look forward to
continuing an exceptional partnership
for years to come.”

Keith Warren
Engineering Manager
Back Cove Yachts

Image courtesy of Back Cove Yachts

(Seaview PMA-BC-37S mast shown.)

TAPERED MASTS 16
 “Afina 3950 by Floe International uses Seaview
mounts exclusively. The sport yacht seamless
appearance, rugged quality and ease of
installation are appreciated.”

Steve Gillman
Product Development Manager
FLOE Craft

Image courtesy of FLOE Craft

17 (Seaview PMF-107-M1, ADA-R1, SP1-MOD and LTB-R shown)
STAINLESS STEEL MOUNTS
FOR MOST CLOSED DOME & OPEN ARRAY RADARS

LTBP1697 LED light

sold separately

PART NUMBER GUIDE

FURUNO
15” - 24” radar domes PMA57LSS
LTBRSS 4’ - 6’ open array radars PMA57LSS

Stainless Steel GARMIN

light bar sold 18” - 24” radar domes PMA57LSS

separately Fantom, 4’ - 6’ open array radars PMA57LSS

HUMMINBIRD
HB2124 Chirp Radar PMA57LSS
4’ - 6’ open array radars PMA57LSS

JRC
15” radar domes PMA57LSS

KODEN
18” - 25” radar domes PMA57LSS
4’ - 6’ open array radars PMA57LSS

Body LOWRANCE
made out 3G, 4G, HALO20(+), HALO24 PMA57LSS
Top plate included of 316 LORENZ
stainless 12” - 24” radar domes PMA57LSS
PMA57LSS
steel 4’ - 6’ open array radars

7” x 7” base plate RAYMARINE

18” - 24” Radomes PMA57LSS

STAINLESS STEEL LIGHT BARS Quantum, Quantum 2 radar PMA57LSS

4’ - 6’ open array radars PMA57LSS

SIMRAD
3G, 4G, HALO20(+), HALO24 PMA57LSS
TX06S, TX10S PMA57LSS
LTBRSS PMA57LSS
4’ Halo™ open array radar +
Polished 316 Stainless Steel 1 ADAHALO3

1/4” light bar for closed dome 4’ - 6’ RB Series open array radars PMA57LSS

radar. Comes with S.S. saddle as- SITEX

sembly to properly secure to the 18” - 25” radar domes PMA57LSS
4’ - 6’ open array radars PMA57LSS
PMA57LSS radar mount.
Must choose a light bar top from
page 13.
LTBRSS
(shown with
LTBP1697
soldseparately)

DIMENSIONS
Part #
A B C D E B CA
inch /mm inch /mm inch /mm Degrees inch /mm D
PMA57LSS 7 / 177.8 5.91 / 150 5 / 127 80º 0.25 / 6.35

A
E

STAINLESS STEEL MOUNTS 18

LOW PROFILE ADAPTERS
FOR MOST SATDOMES

OPTIMIZE YOUR SATELLITE

DOME INSTALLATION
The Seaview Low Profile Adapters will reduce
the footprint of your satdome. Add an AMA-W
wedge to your installation to level your
satdome when installing on sloped surfaces.

• The AMA18, AMA18IP & AMA24 are made

with ABS plastic with an internal anodized
aluminum plate for superior strength
• The AMAGXF is made of powder coated
marine grade aluminum
• Small mounting base for space limited
installations
• Hides cables

Water tight seal fits

between satdome ACCESSORY | AMA-W
and mount

AMA16 UV stable white ABS plastic

Marine grade aluminum

By rotating the AMA-W wedge halves you

can achieve 0° - 12° of adjustment. The
AMA-W wedge works with AMA-16, AMA-18,
AMA18IP, AMA-24 and AMA-GXF only.
AMAGXF

AMA-14 / AMA-16 /
AMA-18 / AMA-18IP / AMA-24 AMA-GXF
DIMENSIONS A A
A B C
Part # inch /mm inch /mm inch /mm
AMA-14 8 / 203.2 4.75 / 120.6 3.35 / 85.09
AMA-16 12 / 304.8 8 / 203.2 2.75 / 69.85
AMA-18 14.25 / 362 8 / 203.2 2.65 / 67.31
AMA-18IP 14.25 / 362 8 / 203.2 3 / 76.2
AMA-24 19 / 482.6 8 / 203.2 2.70 / 68.58
AMA-GXF 12 / 304.8 8 / 203.2 3 / 76.20
C
C
B
B

19 LOW PROFILE SATDOME ADAPTERS

LOW PROFILE SATDOME PART # GUIDE
Find your satdome below to find the correct Low Profile mount part number. If you do not see your satdome below
please give us a call.

GLOMEX RAYMARINE
Pandora, 20” - 27” satdomes AMA-GXF 33STV AMA-GXF

INTELLIAN 37STV AMA-16

45STV AMA-18
i2 AMA-GXF
60STV AMA-24
i3 AMA-16
i4, i4P, i5 AMA-18 SEA TEL / COBHAM
i6, i6P, S6HD, FB500 AMA-24 ST14, FX150 (16.5”) AMA-18
C18, FX250 (24”) AMA-18
Contact
i9, S80hd
Seaview THRANE & THRANE Aluminum insert shown
FB150, FB250 AMA-14 FB150, FB250, Fleet 33, Fleet 33+ AMA-14 inside the AMA-24. The
KVH SAILOR FB500, Fleet 55+ AMA-GXF
AMA-18 and AMA-18IP
M1, M1DX, TV1, LTE-1 AMA-GXF
M2, M3, M3DX, M3ST, V3, V3-IP, TV3 AMA-16
are also reinforced with
M5, TV5, FB250(18”) AMA-18 the aluminum insert. This
M7, M7SK, HD7, TV6, V7, FB500 (26”), F55 AMA-24 provides superior strength
V3-IP (24”), TV7-IP, V7HTS AMA-18IP and durability.
Contact
TV8, HD11, FB500 (35”), F77
Seaview

FB150 (10.8”), FB250 (11”), Fleet 33, Fleet One AMA-14

“Intellian is happy to work with Seaview to

provide our customers with a professional,
stylish and cost effective mounting solution
for the comtplete range of Satellite TV and
Communication products.”

Paul Comyns
VP Global Marketing
Intellian

Photos courtesy of Integrated Marine Systems

(Seaview AMA-24 shown) LOW PROFILE ADATPERS 20
CAMERA &
SEARCH LIGHT MOUNTS
VERTICAL MOUNTS D
A

B D

C E

CAMERA SEARCH LIGHT

PM5-FMT-8 PM5-FMD-8 PM5-FMH-8 PM5FM38 PM5-SL-8
inch /mm inch /mm inch /mm inch /mm inch /mm
A 7.12 / 182.6 6 / 152.4 7.75 / 196.9 10.75 / 273.05 7.6 / 193
B 5.63 / 143 5.63 / 143 5.75 / 146 5.75 / 146.05 6.38 / 162
C 8 / 203.2 8 / 203.2 8 / 203.2 8 / 203.2 8 / 203.2
D 4.77 / 121.2 4.77 / 121.2 4.77 / 121.2 4.77 / 121.2 4.77 / 121.2
E 0.5 / 12.7 0.5 / 12.7 0.5 / 12.7 0.5 / 12.7 0.5 / 12.7
PM5FMH8 PM5FM38

AFT LEANING MOUNTS

D
B
A D
C
E
A
A B C D E
inch /mm inch /mm inch /mm inch /mm inch /mm
CAMERAS

PMA-5FMT-7 7 / 178 5.25 / 140 70° 5 / 127 0.5 / 12.7

PMA-5FM3-7 7 / 178 5.5 / 139.7 70° 5 / 127 0.5 / 12.7
PMA-12FMT-7 7 / 178 12.75 / 323.85 70° 5 / 127 0.5 / 12.7
PMA-12FM3-7 7 / 178 12.5 / 317.5 70° 5 / 127 0.5 / 12.7

SEARCH LIGHTS
PMA5FMT7 PMA12FSL7
PMA-5FSL-7 7 / 178 5.25 / 140 70° 5 / 127 0.5 / 12.7
PMA-12FSL-7 7 / 178 12.75 / 323.85 70° 5 / 127 0.5 / 12.7

DUAL MOUNT * PMA-DM4-M1 also available,

refer to page 10.
B
C
F
A
Top plate required (Refer to page 11).
D

AD

E
A B C D E F
inch /mm inch /mm inch /mm inch /mm inch /mm inch /mm
PMA-DM1-M2 10 / 254 14.5 / 368.3 62° 8.5 / 216 0.5 / 12.7 3.88 / 98.43

21 CAMERA & SEARCHLIGHT MOUNTS

TOP DOWN RISER
Designed in cooperation with FLIR / Raymarine engineers. Tested and
approved by FLIR / Raymarine as recommended mounting for their night
vision cameras.

C A

CAMERAS
FTDR2 FTDR3 FTDR4
inch / mm inch / mm inch / mm
The FTDR-2, FTDR-3 and FTDR-4
A 8.86 / 225 7.75 / 196.85 12.75 / 323.85
B 2 / 50.8 1.5 / 38 2.4 / 60.96
mounts allow you to mount FLIR
C 8 / 203 7 / 177.8 11.75 / 298.45 or Raymarine thermal cameras
upside down or vertically.

MAST MOUNT | SM14F Key RAIL MOUNT | RM-GOL-1

SM14F2 1” = 25.4mm

SM14F3 6”

16.61”
6”

2.75”

4.7” A RM-GOL-1 rail mount for

7.5” search lights. Fits rails ¾” Fits rail Ø
A SM-14-F mast mount
to 1¼” in diameter. ¾” to 1¼”
for thermal cameras.

CAMERA & SEARCH LIGHT MOUNT PART # GUIDE

CAMERA SEARCH LIGHT
FLIR NVTI COMNAV VEI ACR GOLIGHT JABSCO
M324S, M324L, M324CS, M300C,
M132, M400, NV2020,
MD324, M324XP, M625S, M625L, M332, M364, RCL50,
M232 M400XR, NV1018, EXPLORER V2, V3 APOLLO II, II HD RCL75 RCL85 RCL95 RCL300 ALL MODELS ALL MODELS
MD625 M625CS, M625XP, M612L, M364C RCL100
(Hiko) M500 NV1020
Part # M617CS, M618CS M364CLR
FTDR2 •
FTDR3 •
FTDR4 •
PM5-FMT-8 • •
PM5-FMD-8 •
PM5-FMH-8 •
PM5-FM3-8 •
PM5-SL-8 • • • • • •
PM5-SL-85 •
PM5-SL-95 •
PMA-5FMH-7 •
PMA-12FMH-7 •

PMA-5FM3-7 •

PMA-12FM3-7 •
PMA-5FMT-7 • • •
PMA-12FMT-7 • • •
PMA-5FSL-7 • • • • • •
PMA-12FSL-7 • • • • • •
RM-GOL-1 •
PMA-DM1-M2* • • • • • • • •
SM-14-F • •
SM-14-F2 •
SM-14-F3 •

* Top plate required CAMERA & SEARCH LIGHT MOUNTS 22

DIRECT MOUNT WEDGES
OPTIMIZES RADAR BEAM

3-4° is most commonly need to compensate for

planing attitude. This is why Seaview only offers
4º direct mount radar wedge the 4° direct mount wedge. We can provide
custom wedges upon request.

DIRECT MOUNT ANGLED WEDGES PART # GUIDE

B&G KODEN SIMRAD
3G, 4G, HALO20(+), HALO24 RW4-2
3G, 4G, HALO20(+), HALO24 RW4-2 18” (MDC 900 series) radar domes RW4-1
DX64S radar domes RW4-6
25” (MDC 900 series) radar domes RW4-2
FURUNO Some 4’ - 6’ open array radars RW4-3
TX06S, TX10S open array radar RW4-5
4’ open array radar (RB7 Series) RW4-3
DRS4DL, 15” - 20” radar domes RW4-1
HDS10 open array radar RW4-5 4’ Halo™ open array radar RW4-7
DRS4D, DRS4DNXT, 24” radar domes RW4-6
LORENZ SITEX
DRS6A-NXT, 4’ - 6’ open array radars RW4-3
18” (T760 / T921) radar domes RW4-1
12” - 24” radar domes RW4-1
GARMIN 4’ - 6’ open array radar RW4-5
24” (T761, MDS12) radar domes RW4-6
Fantom18, Fantom24, GMR18(HD), 25” radar domes RW4-2
RW4-2
GMR18x(HD), GMR24(HD), GMR24x(HD) LOWRANCE 4’ - 6’ open array radars RW4-3
Fantom 4 & 6, 4’ - 6’ open array radars RW4-3 3G, 4G, HALO20(+), HALO24 RW4-2

HUMMINBIRD 4’ - 6’ open array radar RW4-5

HB2124 Chirp Radar RW4-2 RAYMARINE

RH44, RH45 4’ - 6’ open array radars RW4-5 RD418D, RD418HD, RD424D, RD424HD,
RW4-2
Quantum, Quantum 2 radar domes
JRC
RA1048(S)HD, RA3048(S)HD, RA1072(S)HD,
15” radar domes RW4-6 RW4-4
RA3072(S)HD, Magnum open array radars
24” radar domes RW4-5
4’ - 6’ open array radars RW4-5

DIMENSIONS
A B

RW4-1 RW4-2 RW4-3 RW4-4 RW4-5 RW4-6 RW4-7

inch / mm inch / mm inch / mm inch / mm inch / mm inch / mm inch / mm
A 0.31 / 7.87 0.53 / 13.46 0.25 / 6.35 0.15 / 3.81 0.25 / 6.35 0.67 / 17.02 0.29 / 7.37
B 0.95 / 24.13 1.40 / 35.56 0.95 / 24.13 0.95 / 24.13 0.77 / 19.56 1.50 / 38.10 1 / 25.4

23 DIRECT MOUNT RADAR WEDGES

ADAPTER PLATE
FOR SIMRAD® HALO™ OPEN ARRAY RADAR

This Simrad Halo™ adapter plate is a great solution when

replacing an existing Simrad Broadband 3G™, Broadband 4G™, Simrad Halo™
Raymarine or Garmin closed dome radar. Mounting holes pick open array radar
up existing radar brands mentioned above and the Simrad
Halo™ open array. Halo24 works without adapter plate.

Hole pattern for replacing an

existing Simrad Broadband
3G™, Broadband 4G™ and
other brands of radar.
ADA-HALO2
adapter plate

Halo™ mounting hole pattern

“With new electronics coming out all the time and installations getting
even more complex we are always looking for innovative ways to mount
everything. For our clients there is nothing worse than simple “bolt
ons”. Seaview offers a wide variety of options that are customizable and
adaptable to meet the needs of virtually every installation with the added
bonus of quality and style that are second to none. That is what our
customers demand and why Seaview is our solution.”

Todd Albrecht
Vice President
Jupiter Marine

Image courtesy of Jupiter Marine.

(Seaview PMADM2M2, ADAS2, SP2MOD, LTBS & LTBP1697 shown) SIMRAD HALO ADAPTER PLATE 24
MAST PLATFORMS
FOR MOST RADARS & SATDOMES

ADJUSTABILITY

Solid underbody construction not The SM-18-R is designed with fore

only greatly improves strength but and aft adjustable rails so that
also hides radar cables. you can have the radar as close as
possible to the mast.
Predrilled to receive accessories
such as a flood light or horn.
STRENGTH

Six stainless steel rivets with nylon

washers to protect powder coat
finish per foot are used to hold
the heavy duty mounting feet to
the mast.

DIMENSIONS
B

C
D
A

E
(mast diameter)

SM-14-A SM-15-A SM-18-A SM-18-U SM-18-R SM-24-A SM-24-U SM-24-R

inch /mm inch /mm inch /mm inch /mm inch /mm inch /mm inch /mm inch /mm
A 8.23 / 209 12 / 304.8 18.5 / 469.9 12 / 304.80 11.28 / 286.5 18.50 / 470 11.75 / 298.45 11.75 / 298.45
B 15.9 / 403.1 16.25 / 412.75 24.25 / 616 15.65 / 397.51 18.01 / 457.5 24.25 / 616 20 / 508 20 / 508
C 4.11 / 104.4 6 / 152.4 6 / 152.4 3.44 / 87.4 3.44 / 87.4 6 / 152.4 6 / 152.4 6 / 152.4
D 7.44 / 189 6.50 / 165.1 6.50 / 165.1 7.44 / 189 7.44 / 189 6.50 / 165.1 6.50 / 165.1 6.50 / 165.1
E ≤ 2.63 / 66.68 ≤ 2.63 / 66.68 ≤3.63 / 92.08 ≤ 2.63 / 66.68 ≤ 2.63 / 66.68 ≤3.63 / 92.08 ≤ 3.63 / 92.08 ≤ 3.63 / 92.08

25 MAST PLATFORMS
MAST PLATFORM PART # GUIDE
Mast Mount Stainless Steel Mast Mount Stainless Steel Mast Mount Stainless Steel
Part # Guard Part # Part # Guard Part # Part # Guard Part #

B&G JRC SEA TEL / COBHAM

3G, 4G, HALO20(+) SM-18-R SM-G18-U JUE 250, JUE 33 (14”) SM-14-A SM-G18-U ST14, FX150 (16.5”) SM-18-A SM-G18-U
HALO24 SM-18-R SM-G24-U JMA 1032 (18”) SM-18-U SM-G18-U C18, FX250 (24”) SM-24-A SM-G24-U

FLIR JUE 500 (24”) SM-24-A SM-G24-U SIMRAD

JMA-5104, NKE-2042 (24”) SM-24-U SM-G24-U
MD324, MD625, M324XP, M324L, 3G, 4G, HALO20(+) SM-18-R SM-G18-U
M324S, M324CS, M625XP,
SM-14-F NA KODEN HALO24 SM-18-R SM-G24-U
M625L, M625S, M625CS, M612L,
M617CS, M618CS 18” (MDC 900 series) radomes SM-18-U SM-G18-U DX64S SM-24-U SM-G24-U

M300C, M332, M364, M364C

SM-14-F3 NA
25” (MDC 900 series) radomes SM-24-U SM-G24-U SITEX
M364C LR
KVH 18” (T760 / T921) radomes SM-18-U SM-G18-U
M132, M232 Series (Hiko) SM-14-F2 NA
FB150 (10.8”), FB250 (14”), Fleet 24” (T761, MDS12) radomes SM-24-U SM-G24-U
FURUNO 33, Fleet One
SM-14-A SM-G18-U
25” radomes SM-24-A SM-G24-U
M1DX, M1, TV1, M2, M3, M3DX,
DRS4DL, DRS4W SM-18-U SM-G18-U
M3ST, V3, V3-IP, TV3, LTE-1
SM-15-A SM-G18-U THRANE & THRANE
SC30, SC703, SC1303 SM-24-U NA
M5, TV5, FB250 (18”) SM-18-A SM-G18-U FB150, FB250, Fleet 33, Fleet 33+,
DRS4D, DRS4DNXT SM-24-U SM-G24-U SM-14-A SM-G18-U
M7, M7SK, HD7, V7, TV6, Fleet One
GARMIN FB500 (26”), V3-IP (24”), TV7-IP
SM-24-A SM-G24-U
Sailor FB500, Fleet 55+ SM-24-A SM-G24-U
GMR18(HD), GMR18x(HD), FB150 (10.8”), FB250 (14”),
Fantom18
SM-18-R SM-G18-U Fleet33, Fleet One
SM-24-U SM-G24-U VDO
GMR24(HD), GMR24x(HD),
SM-24-R SM-G24-U LORENZ Ocean Line 132 (18”) SM-18-U SM-G18-U
Fantom24 Ocean Line 337 (15”) SM-18-A SM-G18-U
12” - 24” radomes SM-18-U SM-G18-U
HUMMINBIRD Ocean Line 345 (18”) SM-24-A SM-G24-U
LOWRANCE Ocean Line 360, 445, 460 (24”) SM-24-A SM-G24-U
HB2124 Chirp Radar SM-18-R SM-G24-U
3G, 4G, HALO20(+) SM-18-R SM-G18-U
INTELLIAN RAYMARINE
FB150, FB250 SM-14-A SM-G18-U RD418D, RD418HD SM-18-R SM-G18-U
i2, i3 (FB150 in i3 matching RD424D, RD424HD SM-24-R SM-G24-U
SM-15-A SM-G18-U
dome)
Quantum, Quantum 2 radar SM-18-R SM-G24-U
i4, i4P (FB150 in i4 matching
SM-18-A SM-G18-U 33STV, 37STV SM-15-A SM-G18-U
dome)
i5, i6, i6P, S6HD, FB500 SM-24-A SM-G24-U 45STV SM-18-A SM-G18-U

FB150, FB250 SM-14-A SM-G18-U 60STV SM-24-A SM-G24-U

T200, T300, T400 SM-14-F NA

MAST PLATFORM ACCESSORIES

Stainless steel guard for most SM-AD-ISO Isomat adapter for boats SM-AD-FB Flybridge adapter kit
closed dome radars. Part number with Isomat masts (Integral Track at for smaller mast mounts. Fits the
SM-G18-U and SM-G24-U. (Refer to the Front). following Seaview mast mounts:
guide above) SM-18-R, SM-18-U, SM-14-F.
Will allow for 35° of adjustment.

MAST PLATFORMS 26
RADAR MAST POLE KITS
RADAR MASTS FOR SAILBOATS & TRAWLERS
Seaview offers a pole mount for just about any application. The two most common pole kits are the 8’ or 10’ tall
pole kits. Additional sizes are available, please call to special order. The adjustable base has a small 5¼” x 3”
footprint, and water tight Seaview Cable Gland, which can be easily disassembled for pole removal.
NOTE: Each pole kit comes with the Seaview modular top, top plate to fit most closed dome radars, 8’ pole (3”
diameter) and adjustable base with cable gland integration. The only variable between the three common pole kits
below are the secondary support kits.

Fixed pole top Fixed pole top Fixed pole top

for all closed for all closed for all closed
dome radars dome radars dome radars

Two 48” support

strut kits
One 48” support
8’ strut kit 8’ 8’ Adjustable
1” rail stand-off 1” rail stand-off pole base
kits kits

Adjustable
Adjustable pole base
pole base

RM8148 8’ Tall Kit RM8KT1 8’ Tall Kit RM848S 8’ Tall Kit

- Fixed pole top - Fixed pole top - Fixed pole top
- One 48” strut - One 1” rail stand off kit - Two 48” strut kits
- One 1” rail stand off kit - Adjustable base - Adjustable base
- Adjustable base

8’ TALL POLE KIT (For 3” Diameter Mast)

Fixed Top, Adj. Base, Pole & 48” Strut Kit & One Rail Stand-Off Kit RM8148 NOTE: Top plate included with
Fixed Top, Adjustable Base, Pole & One Rail Stand-Off Kit RM8KT1
each pole kit to fit most closed
Fixed Top, Adjustable Base, Pole & Two 48” Strut Kits RM848S
dome radars

27 RADAR MAST POLE KITS

ADJUSTABLE BASE
All Seaview Pole Kits feature a anodized
adjustable base with a water tight Seaview
Cable Gland.

HEAVY DUTY SUPPORTS

High polished stainless steel strut supports.
Not offered in the
RM8KT1 Pole kit.

RAIL STAND-OFF KIT

The rail stand-off kit includes two
turnbuckle style struts that are adjustable
from 6” - 12”, two stainless steel 3” pole
clamps and two stainless steel 1” rail
clamps. 11⁄4” clamps are available upon
special request.

RADAR MAST POLE KITS 28

SAIL PODS - SPOD
FOR MOST INSTRUMENTS & DISPLAYS

PRECISE VIEWING
UV resistant ABS plastic The Seaview SPOD fits the majority
of steering gear in the market place
including Jefa, Whitlock and Edson.

• Clamps onto 1”, 1⅛” or 1¼” rails

• Fits standard 12”, 9½” & non
standard guard rails
• UV resistant ABS plastic
• Water tight gasket
• Tamper resistant security screws

Water tight gasket

GORETM
protective
vent

Two high polished stainless steel clamps

are used to secure your SPOD to a 1”,
1⅛” or 1¼” (25mm to 32mm) rails. The
SPOD fits standard 12”, 9½” and non
standard guard rails.

The SP1BOX is an add-on accessory that allows you to

mount additional instruments to your SPOD. This optional
add-on will fit single instruments 4.125” x 4.125” or smaller.
Depending on the pod box size you can fit up to 4 of these
onto a single SPOD. Carbon fiber look available upon special
request. Contact Seaview for more
information.

ACHIEVE THE
PERFECT VIEW
The SPOD has a wide
mounting angle, allowing for
precise viewing. Angle is set
during installation.

29 SAIL PODS
DECK PODS - DPOD
FOR MOST INSTRUMENTS & DISPLAYS

QUICK ON THE FLY

ADJUSTMENTS
When you are just about to catch a huge
one the last thing you want to worry about
is adjusting your fish finder. With the quick
adjustment knob on the DPOD simply pull the
knob out and rotate.

• Rotates up to 350°
• Anodized aluminum base
• UV protected ABS plastic housing
• Water tight gasket
• Tamper resistant security screws

Water tight gasket

Anodized aluminum rotating base

Tamper resistant screws

Tamper proof screws are used to secure the

UV protected ABS plastic housing of the SPOD,
DPOD and Rail Pods.

Need help with finding

the right SPOD or DPOD
for you?

Check out our reference

guide on page 33!

The Seaview DPOD is very easy to adjust.

Just simply grab the sides of the DPOD and
turn either direction. It’s perfect for quick
adjustments! DECK PODS 30
SAIL, DECK & RAIL POD
PART NUMBER GUIDE
A E Note: All pods are
uncut. Seaview can
F1 H° pre-cut upon request. NOTE: Electronics change
F2 often. Please refer to
D Max Cut Out Area
B G1 G2 website for most up to
I°
date reference guide.
Max Usable Face

C
A B C D E F1 G1 F2 G2
H I
inch / mm inch / mm inch / mm inch / mm inch / mm inch / mm inch / mm inch / mm inch / mm
Overall Dimensions Max Usable Face Max Cut Out Area
SP1S 5.04 / 127.97 NA NA 5.16 / 131.14 3.125 / 79.38 4.63 / 117.47 4.63 / 117.47 4.125 / 104.77 4.125 / 104.77 NA NA
SPOD / RAIL POD

SP1S2 5.38 / 136.53 NA NA 5.38 / 136.53 3.38 / 85.73 5 / 127 5 / 127 4.38 / 111.13 4.38 / 111.13 NA NA
SP2S /
12.30 / 312.55 NA NA 7.56 / 191.89 5.08 / 129.03 11.75 / 298.45 7 / 177.80 11 / 279.40 6.125 / 155.57 26° 12°
SP2S1
SP3S /
14.25 / 361.95 NA NA 9.5 / 241.30 5.15 / 130.73 13.75 / 349.25 9 / 228.60 12.94 / 328.63 8.125 / 206.37 32° 30°
SP3S1
SP4S 17.5 / 444.50 NA NA 12.75 / 323.85 5.7 / 144.78 16.94 / 430.23 12.25 / 311.15 16 / 406.40 11.25 / 285.75 10° 7°
SP5S /
15.25 / 387.35 NA NA 5.5 / 139.70 3.19 / 80.90 14.75 / 374.65 5 / 127 13.88 / 352.42 4.125 / 104.77 6° 6°
SP5S1

SP2P 12.30 / 312.55 9.37 / 238 4 / 101.6 7.56 / 191.89 5.08 / 129.03 11.75 / 298.45 7 / 177.80 11 / 279.40 6.125 / 155.57 NA NA
DPOD

SP3P 14.25 / 361.95 11.31 / 287.27 4 / 101.6 9.5 / 241.30 5.15 / 130.73 13.75 / 349.25 9 / 228.60 12.94 / 328.63 8.125 / 206.37 NA NA
SP5P 15.25 / 387.35 7.31 / 185.67 4 / 101.6 5.5 / 139.70 3.19 / 80.90 14.75 / 374.65 5 / 127 13.88 / 352.42 4.125 / 104.77 NA NA

Accessory
SP1BOX 5.04 / 127.97 NA NA 5.16 / 131.14 3.125 / 79.38 4.63 / 117.47 4.63 / 117.47 4.125 / 104.77 4.125 / 104.77 NA NA
SP1BOX2 5.38 / 136.53 NA NA 5.38 / 136.53 3.38 / 85.73 5 / 127 5 / 127 4.38 / 111.13 4.38 / 111.13 NA NA

PART NUMBER GUIDE SPOD DPOD RAIL POD PART NUMBER GUIDE SPOD DPOD RAIL POD

B&G LOWRANCE
Triton2 SP1S2 — SP1S2 TROPHY-5M, HDS-5, HOOK5, 5X, HDS-7,
HDS-7 Gen3, 7M, Elite 7, Elite-5Ti,
Vulcan 5, Vulcan 7, Zeus2 7, Z7, Touch 7, Zeus3, SP2S SP2P SP2S1
SP2S SP2P SP2S1 Elite-7Ti, HDS-9, HDS-9 Gen3, Elite-9Ti,
Zeus2 9 (W9), Zeus3 9, H5000 HOOK 7, 7x, HOOK 9, 9x, Elite 9, 9x
Vulcan 9, Z8, Vulcan 12, Touch 8 SP3S SP3P SP3S1 HDS-8, HDS-8M, HDS-10, HDS-10M,
SP3S SP3P SP3S1
HDS-12 Gen2, HDS-12 Gen3, Elite-12Ti
Zeus2 12 (Z12), Touch 12, Zeus3 12, T12, Zeus2 Glass Helm
SP4S — —
ZM 16 RAYMARINE
FURUNO a65, a67, a68, a75, a77, a78, e7, e7D,
Axiom 7 (+), eS75, eS77, eS78, c95, c97,
GP39, GP1670, GP1670F, GP1870, GP1870F, GP7800 SP2S SP2P SP2S1 SP2S SP2P SP2S1
e95, e97, Axiom 9 (+), Element 7HV,
GP170, GP170D, GS100, 1623, 1715 SP3S SP3P SP3S1 Element 9HV
TZTL12F, MFD12 SP4S — — eS97, eS98, a95, a97, a98, gS95,
SP3S SP3P SP3S1
Axiom 9 (+), Axiom 12 (+)
GARMIN a125, a127, a128, eS127, eS128, gS125,
echoMAP 50 series, echoMAP CHIRP 52cv - 54cv, GPSMAP 722, e165, gS165, Axiom Pro 12, Element SP4S — —
722xsv, 742, 742xsv, Striker 5, Striker 7, 441, 441S, 527, 547, 12HV
620, 640, 720, 721, 740, 741, 741xsv, 70s, 7407xsv, 7607xsv,
echoMAP 70 & 90 series, echoMAP CHIRP 92sv - 95sv, 75sv, SP2S SP2P SP2S1
SIMRAD
74sv, 73sv 72sv, 74cv, 73cv, GPSMAP 922, 922xsv, 942, 942xsv, NSS7, NSS7 evo2, NSS7 evo3, GO5
6008, 6208, 8008, 8208, 7408xsv, 7608xsv, 62cv, 64cv, 65cv, XSE, GO7 XSE, NSS9 evo2, NSS9 evo3, SP2S SP2P SP2S1
72cv, 75cv, 93cv, Striker 9 Cruise5/7/9
820, 840, 4008, 4208, 5008, 5208, 7410xsv, 7610xsv, 7412xsv, GO9 XSE, NSS8, NSE8, GO12 SP3S SP3P SP3S1
7612xsv, GPSMAP 1022, 1022xsv, 1042xsv, 8612xsv, 8412xsv, SP3S SP3P SP3S1
8610xsv, 8410xsv NSS12, NSE12, NSS12 Evo 2, NSS12 Evo
SP4S — —
1020, 1040, 4010, 4210, 4012, 4212, 5012, 5212, 8012, 8212, 3, MO16-T, MO16-P, NSO Evo3 16
7416xsv, 7616xsv, 8015, 8215, GPSMAP 1222, 1222xsv,
1242xsv, 8616xsv, 8416xsv, 8617, 8417
SP4S — —
SITEX
SVS-560CF, EC5E, EC5I, EC5FE, EC5FI,
HUMMINBIRD SNS 700
SP2S SP2P SP2S1

Helix 5, 50 0 Series, 700 Series, Helix 7, 800 Series, 900 Series SP2S SP2P SP2S1 EC7E, EC7I, EC7FE, EC7FI SP3S SP3P SP3S1
EC11, SNS 1100 SP4S — —
Helix 9, Helix 10, ONIX 8, ONIX 10 SP3S SP3P SP3S1
ION 10, ION 12, 1100 Series, Helix 12, Solix 12, Solix 12SI, Solix
STANDARD HORIZON
SP4S — —
15, Solix 15Si CP150, CP150C, CP155C, CP170C,
CP175C, CPN700i, CP190i, CP390i, SP2S SP2P SP2S1
KODEN CPF190i, CPF180i, CPF300i
KGP-913MkII, 913MkIID, KGP-915, KGP-925, KGP-920, KGC-222, CPN1010i, CP1000C SP3S SP3P SP3S1
SP2S SP2P SP2S1
CVS-126, CVR-010, KTN-70A
CP590 SP4S — —
CVS-126, CVR-010 SP3S SP3P SP3S1
CVS-128, CVS-128B, MRD-103, MRD-103A SP4S — —
ICOM
MA-500TR SP2S SP2P SP2S1

31 SAIL, DECK AND RAIL POD REFERENCE GUIDE MXD5000 SP4S — —

RAIL POD
FOR MOST INSTRUMENTS & DISPLAYS

OPTIMIZE YOUR VIEW

Seaview offers a solution to the age old
SP2S1 rail pod
problem of figuring out where to mount all your
instruments on your sailboat. The Rail Pod allows
you to mount smaller displays and instruments
directly to the rail, allowing you to position the
Backing plates
instrument where it is most optimal for you.
inside and
out for added • Fits 1”, 1⅛” or 1¼” (25mm to 32mm) rails
strength and • Cables routed internally through the clamp
stability and into the rail
• UV protected ABS plastic housing
• Water tight gasket
Water tight SP1S rail pod • Tamper resistant security screws
gasket

High polished
stainless steel
clamp

FAQ’s Held together

with tamper
1. Will Seaview Rail Pod fit my electronic device?
resistant
Yes, several pod box sizes to fit your electronic device.
security
Plus with the accessory pod option you are able to mount
screws
small screens just about anywhere.

2. Is it easy to install your instrument pods?

Seaview instrument pods are very easy to install and only
requires basic tools and a drill.

3. Are these durable?

Yes! Our pods are made from UV resistant ABS plastic.
The clamps are made from 316 stainless steel. So you
can be sure our pods can withstand the harshest of
conditions.

4. Will the instrument pod protect my electronic

instrument?
Yes, our instrument pods use a rubber gasket to keep
water out. A GORETM vent also lets hot air out without
letting water in. Tamper resistant screws are also used to
hold everything together. The SP1S rail pod
can rotate 360° so
5. Are these instrument pods uncut or pre-cut? that you can set
For ease of stocking purposes Seaview instrument pods the desired view
are uncut. We do offer a pre-cut service however. angle

RAIL PODS 32
RETROFIT CABLE GLANDS
FOR MARINE ELECTRONIC CABLES

Grey plastic housing EASY INSTALLATION

• Captive nuts.
WATERPROOF
• No need to remove cable
IPX6 & IPX7
RATING connectors during installation.
• No need to remove the cable
at all, simply install with cable
GF+ABS already in place.
plastic
• All hardware provided for easy
base
installation.

WATERTIGHT INSTALLATION
• IPX6 & IPX7 waterproof rating.
• Undrilled tapered watertight
rubber seal.
Part #CG20PG2
Tapered rubber seal • Rubber base gasket.
Rubber gasket IMPROVED SHAPE AND DESIGN
• Strong impact resistant.
• Low profile design.
Install with cable in place!
• No sharp edges.
Paintable to match color of choice. • Flush top design means no
Tapered rubber seal forms place for water to collect.
watertight installation.

WATERPROOF
IPX6 & IPX7 TESTED & APPROVED
IPX6 & IPX7
What does this mean? RATING

• IPX6 test means these pass 100L/min of water

sprayed from 2.5 to 3 meters away for 3 min.
“The Seaview cable gland model
• IPX7 test means these pass a 30 minute
CG30SB that we used is ideal, easy
submersion under 1 meter of water.
to install and matched the other
Yamaha and Uflex through holes.
This is a new product that improves
on other designs, looks good and
works well.”

Rob Bright
Pacific Yacht Management

Image courtesy of Pacific Yacht Management.

33 CABLE GLANDS (CG30SB Cable Gland shown)
CABLE GLANDS WATERTIGHT
INSTALLATION FOR
FOR MARINE ELECTRONIC CABLES YOUR ELECTRONIC
CABLES
The Cable Glands provide
WATERPROOF waterproof cable routing and are
made of:
IPX6 & IPX7
RATING • UV stable glass filled ABS plastic
• 316 stainless steel

Route • Black powder coated S.S.

cable from Each style has options for 17mm
electronic to 34mm (.67” to 1.34”) connectors,
device making it ideal for almost every
through Cable installation.
Gland.
NO NEED TO REMOVE
CONNECTORS
The split seal design eliminates the
need to remove cable connectors
Part #CG30SB Pass cable during installation.
Undrilled seal allows a through boat
No need to WATERTIGHT INSTALLATION
wide variety of cables anywhere on
remove the Tapered rubber seal forms
to be used. the deck.
connector due watertight installation. Base gasket
to the split also provided for clean, watertight
COLOR / MATERIALS
seal design installation. Waterproof rating of
of the Cable IPX6 and IPX7.
GREY ABS
PLASTIC Gland.

IMPROVED SHAPE AND DESIGN

Low profile design for a strong,
impact-resistant and clean
BLACK 316 installation. No sharp edges.
POWDER STAINLESS
COATED S.S. STEEL

Grey plastic,
black
Part #CGM17P-G
powder
coated S.S.
or polished CABLE GLAND PART NUMBER GUIDE
stainless
steel # OF CABLES COLOR / MATERIAL CONNECTOR DIAMETER CABLE SIZE PART #

housing Grey ABS Plastic Up to 20mm / 0.81” Up to 13.5mm / 0.53” CG20P-G

1 Black S.S Up to 20mm / 0.81” Up to 13.5mm / 0.53” CG20S-B
Stainless Steel Up to 20mm / 0.81” Up to 13.5mm / 0.53” CG20-SS
Tapered Grey ABS Plastic Up to 34mm / 1.38” Up to 27.5mm / 1.08” CG30P-G

rubber CABLE GLAND 1 or 2 Black S.S Up to 34mm / 1.38” Up to 27.5mm / 1.08” CG30S-B
Stainless Steel Up to 34mm / 1.38” Up to 27.5mm / 1.08” CG30-SS
GF+ABS seal
Grey ABS Plastic Up to 17mm / 0.67” Up to 10.6mm / 0.5” CGM17P-G
plastic Multiple Black S.S Up to 17mm / 0.67” Up to 10.6mm / 0.5” CGM17S-B
base Stainless Steel Up to 17mm / 0.67” Up to 10.6mm / 0.5” CGM17-SS

Rubber RETROFIT 1 Grey ABS Plastic Up to 20mm / 0.81” Up to 13.5mm / 0.53” CG20PG2

gasket CABLE GLAND 1 or 2 Grey ABS Plastic Up to 34mm / 1.38” Up to 27.5mm / 1.08” CG30PG2

CABLE GLANDS 34
 “As a semi-custom yacht builder, Kadey-Krogen Yachts requires
vendors to provide superior quality products, custom built to
order and within the needed timeframe to keep our production
moving. Seaview does all that, while also providing excellent
engineering support and customer service support before and
after the product is complete.”

Tom Button
VP Operations
Kadey-Krogen Yachts, Inc.

Image courtesy of Kadey Krogen.

(Seaview builds arch and masts for Kadey Krogen)

“Seaview provides our customers with

a simple and elegant solution for our
boats. Seaview has also provided us with
very punctual service when it comes to
custom modifications to their mounting
solutions.”

Andrew Carleton
Protector USA Inc.
Image courtesy of Protector USA Inc.

35 PERSONALIZED MAST OPTIONS

PERSONALIZED OPTIONS
COMPLETE PERSONALIZED MOUNTS FOR RECREATIONAL BOATS

Seaview can custom fabricate a mount specific to your personal design and needs. Our expert design team
can turn your ideas into a reality. By utilizing our experience, skills and software we can provide you with the
ability to visualize your design with multiple viewing angles using interactive 3-D models. Costly mistakes can be
avoided and difficult to foresee aesthetic decisions can be made prior to fabrication. With our experienced team
of fabricators and well equipped facility we can handle whatever project you bring our way. It is our guarantee
that our work will be done with quality in mind. Artistic design and functionality partnered with technology based
fabrication is groundwork for excellence in our products.

MODEL 57 MODEL 58 MODEL 59 MODEL 60

MODEL 61 MODEL 62 MODEL 63 MODEL 64

A Seaview custom arch

for a Beneteau 58

PERSONALIZED MAST OPTIONS 36

PERSONALIZED OPTIONS
COMPLETE PERSONALIZED MOUNTS FOR RECREATIONAL BOATS

MODEL 65 MODEL 66 MODEL 67

MODEL 68 MODEL 70 MODEL 71

For more examples visit our website at

www.seaviewglobal.com

MODEL 72

37 PERSONALIZED MAST OPTIONS

Seaview Cutsom Mount for Maryland Police. PERSONALIZED MAST OPTIONS 38
COMMERCIAL MARINE MASTS
MOUNTING SOLUTIONS FOR COMMERCIAL MARINE MARKETS

For over 20 years Seaview has been designing and manufacturing mounting solutions for commercial, industrial,
governmental agencies, military and Coast Guard applications. A few mast examples are shown below. We can
provide a 3D design to fit your application within 48 hours, and a completed mount in 4 weeks depending on design.

39 COMMERCIAL MASTS
“Meridian Yachts is one
of the top selling bridge
boat brands in the world.
Superior design and proven
materials make the Meridian
fleet among the finest on the water.
Meridian has partnered with Seaview
Seaview because of a shared promise to deliver
exceptional quality and value to its customers. The
Seaview products have proven over time to meet our needs
and those of our customers.”

Bill Gowan
Director Of Engineering
Meridian Yachts
Image courtesy of Meridian
(Seaview PMA-24-ROALM shown) 40
TESTIMONIALS
HERE’S WHAT THEY HAVE TO SAY ABOUT

“Seaview has been a tremendous help to Raymarine USA “We have been working with Seaveiw for a number of years
on all of our demonstration boat projects. These high- now. Whenever a customer calls our SI-TEX Customer
performance boats make appearances at boat shows, Service department and asks us to recommend a supplier
industry events, fishing tournaments, on TV, and at lots of for a Radar Antenna Mount, we instantly recommend
other high-impact events. Both consumers and members of Seaveiw. Our experience working with Seaveiw makes us
the boating press and media come onboard to see the latest very confident that they will have the right radar antenna
Raymarine technologies in-action. mount for the customers installation no matter what type of
boat it is or the size of the radar antenna.
We rig them to be “dream boats” with every conceivable
option and technology. Seaview’s flexible line of electronics Jason, and the staff at Seaveiw go above and beyond
mounting solutions makes it easy to fit our full system researching all of our different SI-TEX and Koden radar
including radar, satellite TV and thermal night vision. Their antennas each year to make sure they will always have the
customizable masts and mounts are rugged, reliable and they right product for our customers.”
look fantastic too. They blend seamlessly with the design of
today’s modern sport-fishing boats and look totally built-in, Allen Schneider
not bolt-on. That’s really appreciated by the boat builders we Vice President
work with on these projects too. SI-TEX Marine Electronics

Another thing that always impresses is Seaview’s ability to

deliver their systems quickly and accurately. No matter what
combination of scanners, sensors and antennas I need to
mount topsides, Seaview’s team always seems to have the “From fit to finish, SEAVIEW offers up the cleanest and best
correct parts ready to go, and they deliver them on-time. The solutions for mounting on both my sail and power boat. Plus
Seaview team is truly a pleasure to work with.” they are always bringing in great ideas like their new folding
running light option! From tapered masts to deck glands
Jim McGowan to electronics pods, Seaview also has all the right parts to
Americas Marketing Manager make the fit perfect and professionally eye catching. Add in
FLIR Maritime and Raymarine excellent technical and customer service, my boat would not
have anything mounted without SEAVIEW!”

Steve Hamber
Business Development/Sales Training, Americas, Navico

“Garmin is proud to work with Seaview and we’d recommend

them as a partner to do business with. In today’s market,
customer expectations are at an all-time high and aesthetics
“Seaview has been an excellent company for Furuno to work
and functionality are at the forefront. Seaview has a proven
with for a number of years. Their off the shelf solutions have
track record of consistently delivering a professional and
been fool-proof and we don’t hesitate to recommend them
reliable product, and because of that, Garmin incorporates
for any boater. It’s a very responsible company. Jason and
their products as often as we can in our demo boats and trade
the Seaview team recently helped us on very short notice
show displays.”
with a one-off, custom mount for a tricky demonstration and
it went off on-time, under budget and without any problems
David Dunn
at all. You can be confident you’re getting great products
Garmin Sr. Manager Marine Sales & Marketing
and great support with Seaview!”

Matt Wood
National Sales Manager
41 TESTIMONIALS Furuno USA
Seaview is
proud to
support the
world’s leading
marine electronic
manufacturers.
Here is what some
of them have to say
about us!

“Intellian is happy to work with Seaview to provide our

customers with a professional, stylish and cost effective
mounting solution for the complete range of Satellite TV and
Communication products.”
Ri ag iew
vi e
Im eav

Paul Comyns
er co PM
(S

VP Global Marketing
48 urt A5
00 es 7M

Intellian
Sp y o 1,
or f R AD
t Y ivi A
ac er R1
ht a A , L
. us TB
tr R,
al LT
ia B

“Our customers have nothing but great things to say about

Pt BO

Seaview products. They are well designed and look great,

y
Lt X)

complimenting many of our KVH antennas well. With all the

d

mounting options available for KVH products, Seaview is the

recommended choice for any installation.”

Ryan Smith
Leisure Marine - National Sales Manager
KVH Industries, Inc. TESTIMONIALS 42
 WWW.SEAVIEWGLOBAL.COM

USA OFFICE EUROPEAN OFFICE

Tel: 509-795-0977 Tel: +33 4 94 53 27 70
Toll Free: 800-655-7922 www.seaviewprogress.com
www.seaviewglobal.com