CourseBook BTech Chemical PDF
CourseBook BTech Chemical PDF
CourseBook BTech Chemical PDF
Course Book
January 2016
General Information about the department:
The Chemical Engineering Department at VNIT is one of the youngest and premier engineering department
of VNIT Nagpur. It has dynamic and goal oriented group of highly qualified and well experienced faculty
with large and modern research and development infrastructure.
Category Credit
1st year credits 43
DC 81
DE 36-48
HM 0-6
OC 0-6
Total 170
The number of credits attached to a subject depends on number of classes in a week. For example a subject with
3-1-0 (L-T-P) means it has 3 lectures, 1 tutorial, and 0 practical in a week. This subject will have eight credits
(3X2+1X1+0X1=8). If a student is declared pass in a subject, then he/she gets the credits associated with that
subject. Depending on marks scored in a subject, student is given a grade. Each grade has got certain points as
follows:
Grades AA AB BB BC CC CD DD FF
The performance of a student will be evaluated in terms of two indices, viz. The Semester Grade Point Average
(SGPA) which is the grade point average for a semester and Cumulative Grade Point Average (CGPA) which is
the grade point average for all the completed semesters at any point in time. SGPA & CGPA are:
Students can Audit a few subjects i.e., they can attend the classes and do home work and give exam also, but
they will not get any credit for that subject. Audit subjects are for self enhancement of students.
Details of faculty members of Chemical Engineering Department:
Scheme of Instructions for B.Tech. Chemical Engineering:For all the B.Tech. programs, first two semesters
are common. The details of these courses are mention in the first year B. Tech Course Book, available at the
VNIT website. In the first two semesters, all the B.Tech. Students complete 43 credits from the courses of Basic
Sciences (BS), Engineering Sciences (ES), and Humanities (HU).
SCHEME OF INSTRUCTION FOR B. TECH (CHEMICAL ENGINEERING) 2015-16 ONWARD
Code Course L-T-P Cr Code Course L-T-P Cr
III Semester IV Semester
Core Core
CML201 Chemical Process Calculations 3-1-0 4 CML221 Mass Transfer I 3-1-0 4
CML202 Fluid Mechanics 3-1-0 4 CML222 Heat Transfer 3-1-0 4
CML203 Mechanical Operations 3-0-0 3 CML223 Chemical Reaction Engineering I 3-1-0 4
CML204 Chemical Engg. Thermodynamics I 3-0-0 3 CML224 Chemical Engg. Mathematics 3-0-0 3
CHL263 Organic Chemistry and Synthesis 3-0-0 3 CML225 Chemical Engg. Thermodynamics II 3-0-0 3
CMP204 Technical Analysis Laboratory 0-0-2 1 CMP202 Fluid Mechanics Laboratory 0-0-2 1
CHP263 Organic Chemistry and Synthesis Lab. 0-0-2 1 CMP203 Mechanical Operations Laboratory 0-0-2 1
Elective (Any one) Elective (Any one)
MAL205 Num. Methods & Prob. Theory 3-0-0 3 MAL205 Num. Methods & Prob. Theory 3-0-0 3
CML231 Materials Science and Engineering 3-0-0 3 CML233 Environmental Engineering 3-0-0 3
CML232 Introduction to Computing Software 3-0-0 3 CML234 Industrial Waste Treatment 3-0-0 3
for Chemical Engineers
OC /HM OC /HM
Total 22 Total 23
V Semester VI Semester
Core Core
CML301 Mass Transfer II 3-0-0 3 CML351 Chemical Technology 3-0-0 3
CML302 Chem. Process Modeling and 3-0-0 3 CML352 Transport Phenomena 3-1-0 4
Simulation
CML303 Process Control and Instrumentation 3-0-0 3 CML353 Chemical Process Equipment Design 3-0-0 3
CML304 Chemical Reaction Engineering II 3-0-0 3 CML354 Energy and Environment 3-0-0 3
CMP304 Chemical Reaction Engineering 0-0-2 1 CMP302 Chemical Process Modeling and 0-0-2 1
Laboratory Simulation Laboratory
CMP322 Heat Transfer Laboratory 0-0-2 1 CMP303 Process Control and Instrumentation 0-0-2 1
Laboratory
CMP321 Mass Transfer Laboratory I 0-0-2 1
Elective (Any two) Elective (Any two)
CML383 Advance Heat Transfer 3-0-0 3 CML386 Biotechnology &Biochemical Engg. 3-0-0 3
CML384 Safety and Risk Analysis 3-0-0 3 CML387 Instrumental Analytical Techniques 3-0-0 3
CML385 New and Renewable Energy Engg. 3-0-0 3 CHL366 Polymer Engineering 3-0-0 3
CHL369 Green Chemistry and Engineering 3-0-0 3
OC /HM OC /HM
Total 20 Total 22
CORE
SUBJETCS
List of the Core Subjects
Course Credits :3
Course Description
Fundamental concepts, gas relationship, molarity, molality, normality, partial pressure, pure component
volume and the related calculations.
Humidity and saturation and their applications fundamental concepts of material balance. Material balance in
various unit processes and unit operations. Material balance with chemical reactions
Energy balance related to various process equipments. Calculation of standard heat of reaction from heat of
formation and heat of combustion, thermo chemistry, energy balance in various unit operations, heat of
solutions, heat of neutralization etc.
Fuels and combustion calculation, proximate and ultimate analysis, adiabatic reaction temperature, air to fuel
ratio, complex processes calculation
Students are expected to have a good understanding of material and energy balance in different chemical
processes and unit operations.
1. Narayanan K V and Lakshmikutty B, Stoichiometry and Process Calculations, Prentice Hall of India Pvt
Ltd, New Delhi 2006
2. Himmelblau D.M.; Basic Principles and Calculations in Chemical Engineering, 6th Edition, Prentice Hall of
India Ltd.
3. Hougen O.A. and Watson K.M.; Chemical Process Principles, Part-I (Material and Energy Balances),
CBSNew Delhi
Course Coordinator
CML 201
Department : Chemical Engineering
Course Credits :3
Course Description
Properties of Fluid: Pressure, density, specific weight, viscosity, dynamic and kinemetic viscosity, Newton’s
law of viscosity and its applications.
Fluid Statics: Pascal’s Law and Hydrostatic equation, absolute and gauge pressures - pressure measurements by
manometers and pressure gauges.– Forces on plane and curved surfaces
Fluid kinetics: Description of Fluid flow, Lagrangian and Eulerian approach One dimensional flow
approximation, Types of fluid Flows: Steady and unsteady, Uniform and non-uniform, control volume concept,
Reynolds transport theorem, Continuity equation, Velocity and acceleration of fluid particle, stream line, streak
line, path line, velocity potential function,
Fluid Dynamics: Momentum theorem and its application. Euler’s equation, Bernoulli’s equation for
incompressible fluid flow, Engineering applications of energy equation,
Pitot – static probe, Current meters,Venturimeter, Orificemeter, Rotameter, Nozzlemeter, Notches & weirs.
Flow Through Pipes: Critical Reynold’s number, velocity distribution in pipes, friction factor, Moody’s chart,
Laminar flow through pipe, Hagen-Poiseulli’s equation, Turbulent flow through pipe, Hydraulic gradient line
and Total energy line. Minor head losses in pipes. Pipe Networking Transmission of power through pipe.
Flow Over Immersed Bodies: Drag and lift, Types of drag force, Drag on sphere, Cylinder and airfoil;
Circulation and Lift on a cylinder and airfoil; Magnus effect
Boundary Layer Theory: Development of Boundary layer over flat plate and pipe, boundary layer thickness
Pumps: definition and classifications - Centrifugal pump: classifications, working principles, , specific speed,
efficiency and performance curves - Reciprocating pump: classification, working principles, indicator diagram,
work saved by air vessels and performance curves - cavitations in pumps - rotary pumps: working principles of
gear and vane pumps
Course Objectives of Fluid Mechanics:
1) To understand the fundamental properties, laws and their applications related to fluids.
2) To understand the fluid kinetics and fluid dynamics.
3) To understand the fluid flow through various sections.
4) To understand the flow over immersed bodies.
5) To understand the Boundary Layer Theory.
6) To understand the various types of pumps and their working principles.
References:
1.Munson BR, Young D F and Okiishi T H , ‘ Fundamentals of Fluid Mechnics’, 5 th Edition, John Wiley &
Sons
1. Gupta Santosh & Gupta Vijay, ‘Fluid Mechanics and its applications’, New Age International Publishers.
2. Munson BR, Young D F and Okiishi T H , ‘ Fundamentals of Fluid Mechnics’, 5th Edition, John Wiley &
Sons
3. Warren McCabe, Julian Smith, Peter Harriott, Unit Operations of Chemical Engineering, McGraw Hill
International Edition, 2005
Course Coordinator
CML202
Department : Chemical Engineering
Course Credits :3
I. Course description:
Understand Properties and characterization of particulate soilds and mechanical separation methods such as
screening, filtration, sedimentation, transportation of solids, agitation etc and associated equipments used for
achieving these methods.
III. Textbooks:
1. McCabe W.L., Smith J.C. and Harriot P., Unit Operations of Chemical Engineering McGraw Hill, New York
2001. 6th Edition
2. Chattopadhyay O.P., Unit Operations of Chemical Engineering, Vol. 1 & 2, Khanna Publications, New Delhi,
1996.
3. Coulson J. M. and Richardson J.F; Chemical Engineering Vol. 1& 2 Publishers: Butter worth – Heinemann
Ltd. 2001-2002.
4. Christie J. GeanKoplis Transport processes & Unit Operation Prentice hall International
7. Hiremath R.S & Kulkarni A.P.,. Mechanical Operations Vol I Everest Publication
IV. Objectives:
1) To impart the basic concepts of mechanical operations
2) To develop understanding about size analysis, size reduction and solid handling
3) Understand mechanical separation methods such as filtration, sedimentation, transportation of solids etc and
associated equipments used for achieving these methods
4) The students are exposed to basic theory, calculations and machinery involved in various solid handling
operations
V. Outcomes:
Upon successful completion of this course Students will be able to solve different problems involving hydro-
mechanical operations and expand their knowledge in this subject. Students will increase their proficiency in
oral and written communications. Students will have gained experience in working within a team of their
colleagues.
Surface area distribution of powders, size reduction and separation, crushing, grinding equipments and their
characteristics, open and close circuit grinding.
2. Size Analysis:
Principles of filtration and theory, filtration equipments and their characteristics, pressure and vacuum filters,
compressible and non compressible cake and their effect on filtration rate, centrifugal separation equipments
and their principles of operation as well as the characteristics, optimum filtration cycle, membrane filtration.
Drag coefficient, free settling and hindered settling, gravity settlers, sedimentation theory and principle of
operation. Batch and continuous thickeners as well as the design procedures, sedimenting centrifuges.
Introduction to agitation and mixing of solids and liquids fundamentals, mixing and agitation equipments and
their operational characteristics, power consumption in mixing and agitation, different types of agitators and
their selection criteria.
6. Handling of solids:
Storage and conveying of solids, bins, hoppers, silos and their operational characteristics, Loading and
unloading of solids, different types of conveyors and elevators for solid materials. Dust collectors, cyclone
separators, electrostatic precipitators, bag filters, operational characteristics of these and other similar dust
separators. (4-Hr)
Course Coordinator
CML203
Department : Chemical Engineering
Course Credits :3
I. Course description:
The course present thermodynamics from a chemical engineering viewpoint. Basic definitions and a
development of thermodynamic laws and its application to non flow and simple steady-flow
processes are stressed in this course.
III. Objectives:
Based on the concepts taught, Student shall be able to formulate and apply the laws of
thermodynamics to solve the given problem on particular thermodynamic process accurately.
IV. Outcomes:
1. Describe the basic concepts (system, surrounding, point function, path function and different
types of processes etc.,)
2. Formulate the relationship between different thermodynamic parameters for different processes.
3. Apply the thermodynamic laws to the given process and solve the problem.
VI. Textbooks:
1. Smith J.M., Van Ness H. C., and Abbott M.M., Introduction to Chemical Engineering
Thermodynamics, McGraw Hill, 2005.
3. Bett K.E., Rowlinson J.S. and Saville G. Thermodynamics for Chemical Engineers,. MIT Press
America.
4. Dadge B.F., Chemical Engineering Thermodynamics, McGraw Hill Co. 1944, New York.
X. Evaluation of students
Course Coordinator
CML 204
Department : Chemical Engineering
Course Credits :1
I. Course description:
The course covers the hands on experience on most of the basic analysis used in the process
industries.
II. Pre-requisites: -
III. Objectives:
Based on the concepts taught, Student shall be able to apply the basic principles to estimate and
analyse industrially important materials.
IV. Outcomes:
4. Describe the basic concepts
5. Analyze the given sample.
.
VI. Textbooks:
Puri, Sharma and Pathania, Principles of Physical chemistry, Vishal Publications, Jalandhar, 1998.
c. An ability to design and conduct experiments, as well as to analyze and interpret data
X. Evaluation of students
Quiz 15 min 10
Viva 10min 10
XII. Notice
Notice will be displayed on CHE 104 Notice Board.
Course Coordinator
CMP 204
Department : Chemical Engineering
Course Credits :3
Objective: Objective of this subject is to expose students to understand the basic organic reaction like
oxidation, amination, alkylation, nitration, polymerization and its application to chemical engineering
Syllabus: Oxidation: Intoduction, definition, types of oxidation, oxidising agents and their properties viz.
permanganate, dichromate, sodium chlorite, chlorine dioxide, peroxides like PbO2, MnO2, H2O2 oxidation
reactions, liquid and vapour phase oxidation, kinetics and thermochemistry of such reactions.
Amination by Amminolysis: General introduction including aminating agents, their properties and survey of
aminating reaction, physical and chemical factors affecting these processes, catalysts used in various amination
and amminolysis reactions and their brief kinetic and thermodynamic study.
Amination by reduction: General Introduction, definition, chemical reactions in iron and acid (Bechamp)
other metals and acid reduction, metal and alkali reduction, sulphide reduction.
Nitration: Introduction, nitrating agents, aromatic nitration, thermal properties and process equipment
nitrators.Halogenation: Introduction, kinetics and thermodynamics of such reactions Manufacturing
processes for selected industrially important organic chemicals, design and construction of equipment for
halogenation, apparatus for photochlorinator.
References:
1. Jagdamba singh and LDS Yadav ; Advanced Organic Chemistry Vol I ⅈ Pragati Prakashan
3. Groggins P. H.; Units Processes In Organic Synthesis, Tata McGraw Hills Book Co.
Evaluation of students
Component Duration Weightage
Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CML263
Department : Chemical Engineering
Course Credits :1
Objective: Objective of this subject is to expose students to perform and understand the basic experimentation
related to organic chemistry and its application to chemical engineering
Syllabus: Quantitative determination of the following functional groups: (1) Acid, (2) Phenol, (3) Nitro,
(4) Amino, (5) Ester, (6) Hydroxy, (7) Aldehyde.
Organic Preparations and purification through activated charcoal treatment/ crystallization (Single/ two step)of
the following; (1) Acetanilide, (2) p-Nitro-Acetanilide, (3) p- Bromo-Acetanilide, (4) Aspirin,( 5) m-
Dinitrobenzene, (6) Oxalic Acid.
Esterification reaction.
Sulfonation reactions.
Class Schedule
Evaluation of students
Quiz 15 min 10
Notice
Notice will be displayed on Notice Board.
Course Coordinator
CHP 263
Department : Chemical Engineering
Course Credits :3
I. Course description:
The core subject CML 221 Mass Transfer-I covers the fundamentals and basic concepts of separation and
purification of mass through its transfer from one phase to the other. Further, it gives learning and
understanding skills towards the problems related to separation & purification and in tern the approach to solve
it by applying the concepts/principles learned in the curriculum.
III. Textbooks:
1. Mass Transfer Operations, Treybal R.E., McGraw Hill Book Co., New York 1980, 3rd Edition
2. Chemical Engineering Vol. I, II & III, Coulson J.M. and Richardson J.F., Pergamon Press, New York
1977
3. Unit Operations of Chemical Engineering, McCabe W.L. and Smith J.C. & Harriot, McGraw Hill Book
Co., New York 1980, 5th Edition
4. Principles of Mass Transfer and Separation Process, Binay K. Dutta, PHI Learning Pvt. Ltd., New
Delhi, Eastern Economy Edition
5. Introduction to Chemical Engineering, Badger W.L. and Banchero J.T., Tata McGraw Hill Book Co.
IV. Objectives:
The objective of this course is to introduce the basic principles of mass transfer and how to quantify,
formulate, and solve engineering problems involving different mass transfer operations like diffusion,
humidification & dehumidification, drying, crystallization and adsorption. To demonstrate that how to
apply mass balances and its transfer and analyze systems
V. Outcomes:
Students will comprehend to Fick’s law of diffusion, the principles of diffusion, driving force, different theories
of Mass Transfer and the analogies. They will understand the through details including problem solving
approach and the applications of theory learnt in industrial practices regarding the mass transfer operations like
diffusion, humidification & dehumidification, drying, crystallization and adsorption.
Theories of mass transfer, analogies and Interphase mass transfer process; simultaneous heat and mass
transfer processes.
Drying: Constant rate and falling rate periods, equilibrium moisture contents, drying equipments, rotary
dryers, drum dryers, vacuum dryers, Spray dryer, fluidized bed dryers, dryer calculations and dryer selection
criteria.
Crystallization: Theory of Crystallization, saturation, supersaturation, nucleation and crystal growth, various
equipments for crystallization, their operational and design characteristics.
Adsorption: Adsorption isotherms, adsorption agents, equipments for adsorption, pressure swing adsorption
technology, adsorption phenomena
XI. Notice
Notice will be displayed on Notice Board near to Chamber and Chemical Engineering Notice Board.
Course Coordinator
CML221
Department : Chemical Engineering
Course Credits :3
I. Course description:
The core subject CML222 Heat transfer covers fundamental principles of the three basic modes of heat
transmission namely conduction convection and radiation. It also covers boiling, condensation and how to identify,
formulate, and solve engineering problems involving conduction, convection, radiation.
II. Pre-requisites:
Maths, Thermodynamics, Fluid Mechanics
III. Textbooks:
1. Hollman J.P.; Heat Transfer, McGraw Hill, 1993
2. Incropera F.P. Fundamentals of Heat and Mass Transfer 5 th Edition Wiley India Pvt.Ltd Ltd.,2008
3. Cengel Y.A. Heat Transfer: A Practical Approach McGraw-Hill; 2 edition ,2002
4. Kern D.Q., Process Heat Transfer, Tata McGraw Hill Book Co., New Delhi, 1990.
5. Coulson J.M., Richardson J.R. Chemical Engineering, Vol. I 5th Edition, Butterworth Heinemann, New
Delhi.
6. Dutta B.K. Heat Transfer; Principles and Applications PHI Pvt.Ltd New Delhi ,2006
IV. Objectives:
The objective of this course is to introduce the basic principles of heat transmission by conduction, convection, and
radiation, how to identify, formulate, and solve engineering problems involving conduction, convection, and
radiation, and how to apply energy balances and rate equations to model and analyze thermal systems.
V. Outcomes:
Students will comprehend Fourier’s law of heat conduction, Newton’s law of cooling, and the Stefan-Boltzmann
law of radiation heating , recognize the relationship between thermo-physical properties and heat transfer,
comprehend the role and importance of boundary layers and dimensional analysis to convective heat transfer, can
solve one dimensional steady-state or transient heat conduction problems, can use empirical correlations to solve
forced and free convection heat transfer for internal and external flows, for condensation and boiling, for heat
exchangers, can predict heat transfer by radiation from ideal and actual surfaces and enclosures, can use
appropriate analytical or numerical solution techniques to find temperature distributions and heat flows in thermal
systems.
Condensation and Boiling, Condensation over flat plate, condensation inside and outside the tubes in horizontal, vertical
and inclined position, film condensation, dropwise condensing. Estimation of film coefficient of heat transfer for
condensing vapours turbulence in condensing film. Heat Transfer to boiling liquids, pool boiling and forced convection
boiling, boiling curve and its characteristics.
Radiation heat transfer, laws of radiation, concepts of black body, gray body, green house effect, emissive power, heat
flux by radiation, view factors, radiation shield, luminous and non luminous gases, heat exchangers, heat transfer fluids.
XI. Notice
Notice will be displayed on Notice Board near to Chamber.
Course Coordinator
CML222
Department : Chemical Engineering
Course Credits :3
I. Course description:
Intensive coverage of reaction kinetics, temperature pressure effects on reaction.
Various reactor types, their performances and how they affect conversion for a given reaction are
stressed in this course.
III. Textbooks:
a. Chemical Reaction Engineering, Octave Levenspiel, John Wiley & Sons, Singapore, 3rd edition,
1998.
b. Elements of Chemical Reaction Engineering, Fogler H.S., Prentice-Hall, NJ, 4th edition, 2006.
c. Chemical Reactor Analysis, G. F. Froment and K. B. Bischoff, John Wiley & Sons, Singapore,
2nd edition, 1990.
d. Chemical Engineering Kinetics, Smith J. M., McGraw Hill, N Y, 3rd edition, 1981.
IV. Objectives:
1. Provide students with a basic understanding of reaction engineering, type of reactions, reaction
kinetics.
2. Enhance their knowledge on types of reactors, working of reactors and different types of
arrangements of reactors
3. Improve the student's ability in deciding type of reactor and their arrangement relating with a
given conversion keeping economy in point of view
V. Outcomes:
At the end of the course, the student will understand the reaction kinetics, type and sequential
arrangement of the reactors to be used, reaction mechanism and reaction path of a given chemical
reaction
VI. Expanded Course description:
1. Introduction to Chemical Reaction Engineering: What is chemical reaction engineering?, Role of
Chemical Reaction Engineering in Process Industry, Classification of reaction based on various terms,
Reaction rate, Chemical kinetics, Variables affecting rate of reaction, Speed of reactions, Problems.
2. Kinetics of Homogeneous Reactions: Concentration dependent term and temperature dependent terms of
rate equation, Single and multiple reactions, Elementary and non-elementary reactions, Molecularity and
order of reaction, Rate constant, Representation of reaction rate, Kinetic models, Temperature
dependency from Arrhenius’ law, thermodynamics, various theories, Activation energy, Problems.
3. Interpretation of Batch Reactor Data: Constant volume batch reactor, Variable volume batch reactor,
Integral method and differential method of analysis of kinetic data, other methods of analysis of kinetic
data, Temperature and reaction rate, Problems.
4. Introduction To Reactor Design: Types of reactors, PFR, CSTR etc., Material & energy balances single
ideal reactor, Space-time and space-velocity, Holding time, Introduction of non-ideal flow, Problems
Ideal Reactors for a Single Reaction: Ideal Batch Reactor, Steady State Mixed Flow Reactor, Steady
State Plug Flow Reactor, Problems
5. Design for Single Reactions: Size comparison of single reactors, General graphical comparison,
Multiple reactor system, Recycle reactor, Autocatalytic reactions, Problems.
6. Design for Parallel Reactions: Introduction to design of parallel reactions, Qualitative and Quantitative
discussion on product distribution, Contacting patterns, Reactor Size and arrangement, Selectivity,
Yield, Problems.
7. Potpourri of Multiple Reactions: Reversible first order reaction, First order followed by zero order
reaction, Zero order followed by first order reaction, Successive reversible reactions of different orders,
reversible reactions, Irreversible series-parallel reactions, Graphical representation, Denbigh reactions
and their special cases, Problems.
8. Temperature and Pressure Effects: Single and multiple reactions, Heats of reaction from
thermodynamics, Equilibrium constant, Temperature, Graphical design procedure, Optimum
Temperature Progression, Heat Effects, Adiabatic and non-adiabatic operations, Problems.
Course Coordinator
CML 223
Department : Chemical Engineering
Course Credits :3
I. Course description:
The course covers the fundamentals of linear and non-linear algebraic equations, ordinary differential equations,
discretization techniques, and optimization problems. These techniques can be applied for solving practical problems in
reaction engineering, fluid flow and heat transfer.
II. Objectives:
The students are expected to clearly understand the role of fundamental tools such as linear algebraic equation, non-linear
algebraic equation, ordinary differential equation and optimization in chemical engineering.
III. Outcomes:
1. Able to solve linear algebraic equations.
2. Able to solve non-linear algebraic equations.
3. Able to solve ordinary differential equations.
4. Able to formulate the problem and apply discretisation techniques.
5. Able to formulate and solve optimization problems.
System of linear algebraic equations, Classification of solution approaches as direct and iterative: Gaussian elimination
method, Introduction to methods for solving sparse linear systems: Thomas algorithm or tridiagonal matrix algorithm,
Iterative methods: Derivation of Jacobi, Gauss-Siedel and successive over relaxation methods, System of linear equation
using eigen values and eigen vector.
Method of successive substitutions derivative free iterative solution approaches, Secant method, regula falsi method and
Wegsteine iterations, Modified Newton’s method and qausi Newton method with Broyden’s update, Optimization based
formulations and Leverberg Marquardt method.
Finite difference method for solving ODE-BVPs with examples, Finite difference method for solving PDEs with
examples, Orthogonal Collocations method for solving ODE-BVPs with examples, Orthogonal Collocations method for
solving PDEs with examples, Model Parameter Estimation using linear least squares method, Gauss Newton Method,
Curve fitting and regression.
Optimization
Basic concept of optimization and formulation, Nature of optimization problem (constraint and unconstraint), Linear
programming by simplex method, Application of optimization based on simplex method.
V. Textbooks:
1. Gupta, S. K.; Numerical Methods for Engineers. Wiley Eastern, New Delhi, 1995.
2. Pushpavanam, S,; Mathematical Methods in Chemical Engineering. Prentice Hall India, New Delhi, 2005.
3. Thomas F and Himmelblau D M; Optimization of Chemical Processes, McGraw Hill, 2001.
VI. Reference Books:
1. P. S. Ghoshdastidar, Computer simulation of flow and heat transfer, Tata McGraw-Hill Publishing, 1st Edition,
1998.
2. Gourdin, A. and M Boumhrat; Applied Numerical Methods. Prentice Hall India, New Delhi, 2000.
3. Canale R P and Chapra S C, Numerical Methods for Engineers with Software and Programming Application,
McGraw Hill, 2006.
XI. Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CML224
Department : Chemical Engineering
Course Credits :3
I. Course description:
The course present thermodynamics from a chemical engineering viewpoint. Thermodynamic
properties, Concepts of phase and chemical equilibria and its application and basics of
electrochemistry are stressed in this course.
III. Objectives:
Based on the concepts taught, Student shall be able to apply the concepts of thermodynamics to
solve the given problem on thermodynamic process accurately.
IV. Outcomes:
6. Describe the basic concepts (Thermodynamic properties like free energy, activity, fugacity etc.,)
7. Solve the problems on phase equilibrium.
8. Apply the concepts of chemical equilibrium and solve the problem.
VI. Textbooks:
1. Smith J.M., Van Ness H. C., and Abbott M.M., Introduction to Chemical Engineering
Thermodynamics, McGraw Hill, 2005.
2. Rao Y.V.C., Chemical Engineering Thermo dynamics, University press (INDIA) Ltd.
c. An ability to design and conduct experiments, as well as to analyze and interpret data
X. Evaluation of students
Course Coordinator
CML 225
Department : Chemical Engineering
Course Credits :1
I. Course description: The course covers the Hands on experience of working by conducting experiments
on most of the basic unit operations like orifice meter, venturimeter, flow through notches, friction in pipe
, filtration equipment, etc.
III. Textbooks:
1. McCabe W.L., Smith J.C. and Harriot P., Unit Operations of Chemical Engineering McGraw Hill,
New York 2001. 6th Edition
2. Chattopadhyay O.P., Unit Operations of Chemical Engineering, Vol. 1 & 2, Khanna Publications,
New Delhi, 1996.
3. Coulson J. M. and Richardson J.F; Chemical Engineering Vol. 1& 2 Publishers: Butter worth –
Heinemann Ltd. 2001-2002.
4. Christie J. GeanKoplis Transport processes & Unit Operation Prentice hall International
5. Badger & Banchero Introduction to Chemical Enginerring Mc-Graw- Hill Education
6. G.G. Brown Unit Operation John Willey
7. Hiremath R.S & Kulkarni A.P., Mechanical Operations Vol I Everest Publication
IV. Objectives:
1. To understand importance of various mechanical operations used in process industry.
2. To apply principles of basic sciences and chemical engineering for designing various size reduction, size
separation and conveying equipments.
3. To experience of handling different unit operations
V. Outcomes:
At the end of the laboratory course students will be able to apply the principles of unit operations through
experimentation and will demonstrate the ability to understand the various equipments used in chemical and
allied process industry-
1 Hydraulic Classifier
2 Batch Sedimentation
To study the batch setting & based on that design of Thickener for given under-sludge
concentration
3 Stokes law
4 Sieve Analyser
5 Jaw Crusher
6 Ball Mill
7 Cyclone Separator
8 Centrifuge
9 Magnetic Separator
11 Orifice Meter
12 Venturi Meter
13 Pitot Tube
To determine discharge coefficient Cd & determine point velocity.
viva
XI. Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CMP202
Department : Chemical Engineering
Course Credits : 1
I. Course description:
The course covers the hands on experience of working by conducting experiments on most of the basic
unit operations like hydraulic classifier, sedimentation , ball mill, jaw crusher , cyclone separator ,
filtration equipment , sieve analysis etc.
III. Textbooks:
1. McCabe W.L., Smith J.C. and Harriot P., Unit Operations of Chemical Engineering McGraw Hill, New
York 2001. 6th Edition
2. Chattopadhyay O.P., Unit Operations of Chemical Engineering, Vol. 1 & 2, Khanna Publications, New
Delhi, 1996.
3. Coulson J. M. and Richardson J.F; Chemical Engineering Vol. 1& 2 Publishers: Butter worth –
Heinemann Ltd. 2001-2002.
4. Christie J. GeanKoplis Transpor processes & Unit Operation Prentice hall nternational
5. Badger & Banchero Introduction to Chemical Enginerring Mc-Graw- Hill Education
6. G.G. Brown Unit Operation John Willey
7. Hiremath R.S & Kulkarni A.P.,. Mechanical Operations Vol I Everest Publication
IV. Objectives: To understand importance of various mechanical operations used in process industry. To
apply principles of basic sciences and chemical engineering for designing various size reduction, size
separation and conveying equipments
To study the batch setting & design of Thickener for given under-sludge concentration.
3 Stokes law
11 Leaf Filter
To find out the rate of Filtration & resistance offered by cake & filter media.
12 Vibrating Screen
13 Sampling methods
Sliptest –I 15 min 10
viva 10min 10
XI. Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CMP203
Department : Chemical Engineering
Course Credits :3
I. Course description:
The core subject CML 301 Mass Transfer-II covers the fundamentals and basic concepts of separation and
purification of mass through its transfer from one phase to the other. Further, it
gives learning and understanding skills towards the problems related to separation & purification and in tern the
approach to solve it by applying the concepts/principles learned in the curriculum.
III. Textbooks:
1. Mass Transfer Operations, Treybal R.E., McGraw Hill Book Co., New York 1980, 3rd Edition
2. Chemical Engineering Vol. I, II & III, Coulson J.M. and Richardson J.F., Pergamon Press, New York
1977
3. Unit Operations of Chemical Engineering, McCabe W.L. and Smith J.C. & Harriot, McGraw Hill Book
Co., New York 1980, 5 th Edition
4. Principles of Mass Transfer and Separation Process, Binay K. Dutta, PHI Learning Pvt. Ltd., New Delhi,
Eastern Economy Edition
5. Introduction to Chemical Engineering, Badger W.L. and Banchero J.T., Tata McGraw Hill Book Co.
IV. Objectives:
To provide students the basic learning and understanding skills towards the problems related to separation
& purification and in turn the approach to solve it by applying the concepts/principles learned in the
curriculum and to increase the student's ability to apply the principles for the design of Mass Transfer
Equipments and their application in process industries.
V. Outcomes:
At the end of the course, the student will understand the Mass Transfer-II principles. The students will be able
to the basic principles of Mass Transfer and to apply it for the design of Mass Transfer equipments needed in
process industries.
Concept of HETP, HTU, NTU in distillation, plate and packed columns, packings for packed columns,
pressure drop in plate and packed columns, bubble cap, sieve tray, valve tray plate columns.
Absorption Equilibrium relationships, two film theory, penetration theory, surface renewal rate theory,
concept of driving force and mass transfer coefficient, plate column and packed columns for absorption,
selection of solvent for absorption and absorbers design procedures.
Liquid – Liquid Extraction fundamentals, selection of solvent for extraction, estimation of mass transfer
coefficients, triangular diagram representation, equipments for liquid – liquid extraction, plate and packed
columns, spray columns, rotary disc contactors, design procedures and equipment selection criteria. Single
stage, multistage operations etc.
Solid – Liquid Extraction fundamentals, Solvent selection, equilibrium relationship, triangular diagram
representation, single stage, multistage concurrent and counter current operation, equipments for solid – liquid
extraction, their design procedure and selection criteria.
XI. Notice
Notice will be displayed on Notice Board near to Chamber and Chemical Engineering Notice Board.
Course Coordinator
CML301
Department : Chemical Engineering
Course Credits :3
I. Course description:
The core subject CML 302 Chemical Process Modelling and Simulation covers fundamental Laws, principles
and uses as well as formulation of mathematical model. It also covers various mathematical models related to
chemical engineering systems. The subject covers practical knowledge of simulation examples of core chemical
engineering systems formulated by FORTRAN
II. Pre-requisites:
Maths, Thermodynamics, Heat Transfer, Mass Transfer, CRE, Fluid Mechanics
III. Textbooks
1. Mickley H. S., Sherwood T. S., Reed C. E., Application of Mathematical Modeling in Chemical
Engineering ,Tata-McGraw-Hill, New Delhi, 2002.
2. Jensen V.G., Jeffrey’s G.V., Mathematical Methods in Chemical Engineering”, 2nd Ed. Academic
Press, London, 1978.
3. Lubyen W. L., Process Modeling, Simulation and Control for Chemical Engineers, McGraw-
Hill,New York, 1989.
4. A. Kayode Coker, Modelling of Chemical Kinetics and Reactor Design, Gulf professional
publication
5. Incropera F.P. Fundamentals of Heat and Mass Transfer 5th Edition Wiley India Pvt.Ltd Ltd.,
2008
IV. Objectives:
1) To understand knowledge of fundamental principles and basic laws of modeling
2) To understand the approach for mass/heat transfer & CRE
3) To apply the knowledge of differential equations
4) To understand the approach for modeling
5) Formulation of mathematical model for various chemical Engg. system
V. Outcomes:
Students are able to model every Chemical Engg. System given to them. Moreover they could make
program of the model equation to get output results, and analyzed the performance of the system
VI. Expanded Course description:
INTRODUCTION TO PROCESS MODELING AND SIMULATION
MATHEMATICAL MODELING OF CHEMICAL ENGINEERING SYSTEM Principle of
formulations, Mathematical consistency of model, Continuity equations, Componentcontinuity
equations, Energy equations, Equations of motion, Transport equations, Equilibrium, Chemical Kinetics
with examples.
Introduction
A General Approach
Series of isothermal, constant_holdup CSTR’S,CSTR’S with variable Holdups, two heated tanks,Gas-
Phase pressurized CSTS,NONISOTHERMAL CSTS, single component vaporizer,Multicomponent flash
Drum,Batch Reactor, Reactor with mass Transfer, idial binary distillation column, multicomponent
Nonidial distillation column, batch distillation with holdup
1 √ √ √
2 √ √ √
3 √ √ √
4 √ √ √
5 √ √ √
Course Credits :3
I. Course description:
The core subject “Process Control and Instrumentation” provides introduction to process control and in depth
discussion on process modelling. The methods of analysis used in the control area are so different from the
previous experiences of students that the materials comes to be regarded as a sequence of special mathematics
techniques, rather than the integrated design approach to a class of real and practically significant industrial
problems.
III. Textbooks:
1. “Process system Analysis & Control”, Donald R. Coughanowr and Kappel, Mc Graw Hill Book
Company.
2. T. Marlin, "Process Control", McGraw Hill, 1995.
3. W.L.Luyben, "Process Modelling Simulation and Control for Chemical Engineers", McGraw Hill, 1990.
4. G.Stephanopoulos, "Chemical Process Control: An Introduction to Theory and Practice", Prentice-Hall,
New Jersey, 1984.
5. R.P.Vyas, “An Introduction to Process dynamics & control, Central publication, Nagpur, 2001
IV. Objectives:
1. To obtain theoretical and empirical mathematical models of different processes.
2. To introduce some of the basic principles and problems involved in process control.
3. To introduce analytical tools and design methodologies to tackle process control problems.
4. To design simple and effective control systems.
V. Outcomes:
1. Students will able to analyze the dynamic behavior of processes and develop good understanding of
their behavior in different situations.
2. Students will able to design different types of controllers and tuning techniques.
3. Students will able to apply control schemes in chemical process Industries.
4. Student will exposed to various schemes like Multi input and multi output, complex control system, and
application of control valves.
Introduction to set point, disturbance, closed loop and open loop control, feedback and feed forward
configurations, dynamics of feedback control system.
Types of controllers, P, PI and PID controllers, controller gain, stability analysis, Routh stability criteria.
Design of controllers using open loop response, Zigeler – Nichols controller settings, Bode and Nyquist stability
criteria.
Control valve and choice of controller settings. Basic design of pneumatic controllers, electric /
electronic controllers, discontinuous control modes – two position, classical and modern control actions.
Process instruments used for measurement of pressure, temperature, liquid level, flow rate and compositions,
pressure gauge, strain gauge, McLeod gauge, vacuum measurement, transducers, transmitters, digital signal
processing.
Introduction to set point, error, accuracy, sensitivity, Application of control systems to chemical process
equipments such as chemical reactors, heat exchangers, distillation columns, boilers etc.
XI. Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CML303
Department : Chemical Engineering
Course Credits :3
I. Course description:
The core subject CML 304 Chemical Reaction Engineering – II covers the application of CML 223 Chemical
Reaction Engineering – I in understanding Flow Pattern and Non-ideal behavior; heterogeneous catalytic, fluid
– fluid, fluid – particles reactions and reactors.
II. Pre-requisites:
CML 223 Chemical Reaction Engineering – I
III. Textbooks:
1. Chemical Reaction Engineering, Octave Levenspiel, John Wiley & Sons, Singapore, 1998 3rd Edition
2. Elements of Chemical Reaction Engineering, Fogler H.S., Prentice-Hall, NJ, 2006, 4 th Edition
3. Chemical Engineering Kinetics, Smith J. M., McGraw Hill, N Y, 1981, 3rd Edition
IV. Objectives:
1. Provide students with a basic understanding of Flow Pattern, Non-ideal behavior; heterogeneous
catalytic systems, fluid – fluid systems, fluid – particles systems.
2. Provide the kinetics and design concepts for these systems.
3. Increase the student's ability to apply these principles for the design of reactors and application in
process industries.
V. Outcomes:
At the end of the course, the student will understand the Chemical Reaction Engineering - II principles. The
students will be able to apply these principles for the design of reactors and application in process industries.
XI. Notice
Notice will be displayed on Notice Board near to Chamber and Chemical Engineering Notice Board.
Course Coordinator
CML 304
Department : Chemical Engineering
Course Credits :1
I. Course description:
This course mainly deals with the understanding the basic fundamental principles of chemical reaction
engineering by performing different experiments
II. Pre-requisites:
Chemical reaction engineering I, Chemical Reaction Engineering II
III. Textbooks:
1) Chemical Reaction Engineering, Octave Levenspiel, John Wiley & Sons, Singapore, 1998 3rd Edition
2) Elements of Chemical Reaction Engineering, Fogler H.S., Prentice-Hall, NJ, 2006, 4 th Edition
3) Chemical Engineering Kinetics, Smith J. M., McGraw Hill, N Y, 1981, 3rd Edition
IV. Objectives:
1) To understand the basic principle of chemical reaction engineering
V. Outcomes:
1) Students will understand the basic of chemical engineering and its practical application.
X. Evaluation of students
XII. Notice
Notice will be displayed on Notice Board near to Chamber.
Course Coordinator
CMP 304
Department : Chemical Engineering
Course Credits :1
I. Course description:
Lab experiments on various equipments related to heat transfer.
II. Pre-requisites:
CML 222 Heat Transfer
III. Textbooks:
1. Coulson J.M., Richardson J.R. Chemical Engineering, Vol. I, Butterworth Heinemann, New Delhi.
2. Kern D.Q, Process Heat Transfer, Tata McGraw Hill Book Co., New Delhi, 1990.
IV. Objectives:
1. To give the in-hand experience of lab scale experiments on various equipments such as heat
transfer through forced convection, pin fin, lagged pipe, emissivity apparatus, stefan’s boltzmann
apparatus, shell and tube heat exchanger, double pipe heat exchanger, open pan evaporator, single
effect evaporator, heat transfer in agitated vessel system
2. To observe and note down the steady state temperatures of all equipments.
3. To determine the heat transfer rate, heat transfer coefficient, and overall heat transfer coefficient for
various equipments such as shell and tube heat exchanger, double pipe heat exchanger etc.
V. Outcomes:
Students will gain practical knowledge of experimental methods. it is expected that students will be able
to plan an appropriate approach to experiment work, adapt original plans in the light of preliminary
findings, demonstrate safe working in the choice of method and apparatus, handle apparatus and
substances correctly and safely, make measurements to an appropriate degree of accuracy and precision,
collect information to arrive at a final conclusion, appraise critically the experimental work, including
identification of, and accounting for, anomalous results and experimental error, and suggest related
improvements to methods, to write up an appropriate concise report
VI. Expanded Course description:
1. To find surface heat transfer coefficient for a pipe flowing heat by forced Convection of air
flowing through it for different air flow rate and heat flow rate
2. To study the temperature distribution along the length of a pin fin under free and forced
convection heat transfer
3. To determine heat flow rates through the lagged pipe for known value of thermal conductivity of
lagged material and To plot the temperature distribution across the lagged material.
4. To determine the emissivity of grey surface.
5. To find out Stefan’s Boltzmann constant.
6. To determine cold water side and hot water side heat transfer coefficient, LMTD and overall heat
transfer coefficient for parallel and counter flow.
7. To calculate rate of heat transfer, LMTD and overall heat transfer coefficient for parallel and
counter flow.
8. To determine the evaporation coefficient and overall heat transfer coefficient of the open pan.
9. To determine the overall heat transfer coefficient of the evaporator.
10. To determine the heat transfer coefficient in agitated vessel system.
2 √ √ √ √ √ √
3 √ √ √ √ √ √ √
X. Evaluation of students
Component Duration Weightage
XI. Notice
Notice will be displayed on Notice Board near to Chamber.
Course Coordinator
CMP322
Department : Chemical Engineering
Course Credits :3
I. Course description:
The core subject CML 351 Chemical Technology covers fundamental knowledge of all Unit operation and Unit
Process required for synthesis of production process. It covers production process of various industries like
Industrial gases, Industrial carbon, Marine Chemicals, Nuclear Industries, Chlor – alkali industries, Electrolytic
and Electrochemical Industries, Fertilizers, Glass - Chemistry
Overall this course is highly useful for the students of Chemical Engg for industrial point of view production
processes.
III. Textbooks
C. L. Dryden, Outlines of Chemical Technology, Edited and Revised by M.Gopala Rao and S. Marshall, 3rd Ed.,
Affiliated East West, New Delhi, 1997.
T. G. Austin and S. Shreve, Chemical Process Industries, 5th Ed., McGraw Hill, New Delhi, 1984.
P. H. Groggins, Unit Processes in Organic Synthesis, 5th Ed., McGraw Hill, 1984.
IV. Objectives:
1) To understand knowledge of unit operation and processes
2) To understand the knowledge of flow/ separation pattern of material
3) To understand the design of unit operations
V. Outcomes:
Students can synthesis production process of required product.
1 √ √ √
2 √ √
3 √
4 √ √ √
5 √ √
6 √ √ √ √
XI. Notice
Notice will be displayed on Notice Board near to Chamber.
Course Coordinator
CML 351
Department : Chemical Engineering
Course Credits :3
I. Course description:
This course mainly deals with application of knowledge gain by students in fluid mechanics, heat transfer and
mass transfer. This subject also covers the topic which shows the similarity between fluid mechanics, heat
transfer and mass transfer
III. Textbooks:
1) R.B. Bird, W. Stewart and E.N Lightfoot, Transport Phenomena, John Wiley & Sons, 2 nd Edition,
2006
2) C.O. Bennet and J.E. Myres, Momentum, Heat & Mass Transfer, McGraw Hills, 3rd Edition, 1994
3) R. Brodkey and H. C. Hershey, Transport Phenomena – A Unified Approach, volume 1, McGraw
Hill Book Co., 2 nd Edition, 1988
4) C.J. Geankoplis, Transport Processes and Separation Process Principles, Prentics Hall India Ltd., 4 th
edition, 2003
5) G.S. Laddha and T.E. Degaleesan, Transport Phenomena in Liquid Extraction, Tata McGraw Hill
Book Co., 1 st edition, 1978
IV. Objectives:
1) To understand the theoretical similarities between heat, mass and momentum transfer
2) To understand the shell balance approach for momentum transfer
3) To understand the shell balance approach for heat transfer
4) To understand the shell balance approach for mass transfer
5) Application for differential equation for shell balance modeling
V. Outcomes:
1) Student will understand the analogical correlation between heat, mass and momentum transfer. Using
this information they can solve the problem in any area (e.g. momentum transfer) using corresponding
logical data in other area (like head and mass transfer).
2) Velocity profile equation derived for given case can be used to estimate various important properties
in momentum transfer.
3) Temperature profile equation derived for given case can be used to estimate various important
properties in heat transfer.
4) Concentration profile equation derived for given case can be used to estimate various important
properties in mass transfer.
5) Student can develop model equations for important properties in the area of momentum, heat and
mass transfer.
Similarity between heat, momentum and mass transport and mass transport and various analogies. Application
of heat, momentum and mass transport concepts to various to various disciplines of engineering and
technology.
One-dimensional equation of motion and continuity, Euler and Navier–stokes equation, dimensional analysis
of equation change.
Shell balance approach for developing equations for momentum, heat and mass transport, Temperature
distribution in solids and fluids in laminar flow, development of thermal boundary layer.
Concentration distribution in solids and in fluids in laminar flow, equations of change for multi component
systems.
XI. Notice
To be announce in the class
Course Coordinator
CML352
Department : Chemical Engineering
Course Credits :3
I. Course description:
The course covers the methods and procedure adopted in designing process equipment. The emphasis here is on
specifying the function, operation and size of the equipment and also on the choice of the material of construction
and strength considerations.
III. Textbooks:
1. Process equipment dsign-vessel design by Lloyd E. Brownell and Edwin Young, John Wiley, NewYork
1963.
2. Chemical Engineering Volume 6 – Design by J.M. Coulson, J.F. Richardson and R. K. Sinnott, Pergamon
press International Edition 1989.
3. Introduction to chemical equipment design – Mechanical Aspects by B.C. Bhattacharyya, CBS Publications.
4. Process Equipment Design by M.V. Joshi and V.V. Mahajani Macmillan India
5. Pressure Vessel Hand book by Eugene F. Megyesy, Pressure vessel company USA.
7. Appropriate ISI Specifications and codes for unfired pressure vessels, viz IS: 2825, IS: 803, IS: 804,IS: 1182,
IS: 4853, IS: 3658, IS: 3703, IS: 3664, IS: 4260, IS: 4072, IS4503.
IV. Objectives:
1. Provide students with basic understanding equipment design.
2. To teach students the design of pressure vessel.
3. To teach students the design of storage vessel.
4. To teach students to apply the design concepts in practical industrial design problem.
V. Outcomes:
After completion of this course the students will be able to do design of industrial pressure vessel and storage
vessel.
VI. Expanded Course description:
Unit-1
Importance of chemical process equipment design, design procedure for pressure vessels subjected to internal
pressure, and combined loading, closures for pressure vessels, Code and standards for pressure vessels
(IS:2825:1969), materials of construction, selection of corrosion allowance and weld joint efficiency.
Unit-2
Design of pressure vessels subjected to high pressure, monoblock construction, shrink fit construction, external
pressure, optimum proportions of pressure vessels, optimum sizing of vessels.
Unit-3
Design of supports, flanges, nozzles for vessels, Design of jackets (as per IS 2825), coils for pressure vessels.
Unit-4
Mechanical design of storage tanks for volatile and non-volatile liquids, roof and bottom design, optimum
proportions of storage tank, storage tanks for solids and its design procedure, Design of cylindrical storage
vessel as per IS:803 and rectangular tanks as per IS:804.
Unit-5
Codes and standards for heat exchangers; Baffles; Tie-rods; Tube joining methods; Design of shell and tube
heat exchangers as per IS : 4503 and TEMA standards; design of single effect evaporator
Unit-6
Design of distillation column, absorption column, and reactors
1.
2.
3.
4.
XI. Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CML353
Department : Chemical Engineering
Course Credits :3
Course Description: This course mainly focuses on conventional and non-conventional energy sources such as
coal, petroleum, natural gas, nuclear energy, bioenergy, hydropower, geothermal energy, solar energy and wind
energy. It is also designed to establish a connection between all the energy sources and their environmental
influences. Several novel concepts for treating the environmental problems are also addressed in this course.
Pre-requisites: None
Textbooks:
1. G.N.Rai, “Non conventional energy sources,” Khanna Publishers, New Delhi.
2. Samir Sarkar, “Fuels and Combustion”, 2nd Edn, Orient Longman Publication, 1988.
3. J. G. Speight, Fuel Science & Technology Handbook, Dekker, 1990.
4. V.Balzani and N.Armaroli, Energy sustainable world, Wiley-VCH, 2011
Objectives:
1. To be able to analyze and interpret the current methods of energy production from various conventional and
non-conventional sources.
2. To be able to understand the modification in the current technology that can be made for efficient and high
energy production.
3. To be able to identify the environmental issues related to each energy source.
4. To be able to understand the modification in the current technology that can resolve the environmental
issues significantly.
Outcome:
Upon successful completion of the course, the students will be able to well interpret the various aspects
involved in conventional and non-conventional energy sources. They will be able to identify the environmental
issues relevant with the current techniques. They will also understand the modification that will be needed to
solve the environmental concerns and to optimize the energy production.
Syllabus: Conventional and non-conventional energy sources; Coal, oil and gas, solar energy; wind energy;
Geothermal energy; Hydropower; Bioenergy; Nuclear energy. Energy survey in India. Current and future
energy requirements in India and across the world and associated environmental problems.
Coal: Coal and Coal derived fuels; Characteristics, production methods and uses. Coal combustion technology,
waste heat recovery.
Oil and Gases: Fuels from oil and gases: Characteristics, production methods and uses. Technology for
combustion of fuels derived from oil and gas.
Solar Energy: Solar energy utilization, Thermal application and photovoltaic applications; Wind, geothermal
and hydro energy utilization.
Bio Energy: Biomass conversion for fuels; production methods based on thermochemical and bioconversion.
Characteristics and uses; Design of digestors.
Nuclear Energy: Nuclear Energy; Nuclear fission fuels processing, Nuclear reactions and nuclear reactors,
Nuclear Engineering.
Environmental aspect related to coal, oil, fuel gases, bio-energy, Nuclear energy.
Class Schedule
Three 55 minutes session per week.
1.
2.
3.
4.
Evaluation of students
Component Duration Weightage
Course Coordinator
CML 354
Department : Chemical Engineering
Course Credits :1
Course description:
Lab experiments on various chemical engineering process
Pre-requisites:
Theory course of Process Modeling and Simulation
Textbooks:
1. Mickley H. S., Sherwood T. S., Reed C. E., Application of Mathematical Modeling in Chemical
Engineering ,Tata-McGraw-Hill, New Delhi, 2002.
2. Jensen V.G., Jeffrey’s G.V., Mathematical Methods in Chemical Engineering”, 2nd Ed. Academic
Press, London, 1978.
3. Lubyen W. L., Process Modeling, Simulation and Control for Chemical Engineers, McGraw-
Hill,New York, 1989.
4. A. Kayode Coker, Modelling of Chemical Kinetics and Reactor Design, Gulf professional
publication
5. Incropera F.P. Fundamentals of Heat and Mass Transfer 5th Edition Wiley India Pvt.Ltd Ltd.,
2008
Objectives:
1) To understand knowledge of fundamental principles and basic laws of modeling
2) To understand the approach for mass/heat transfer & CRE
Outcomes:
Out put data are created for each program and graphs are plotted to analyze the system
Class Schedule
Two hours per week.
1 √ √ √
2 √ √ √
3 √ √ √
4 √ √ √
5 √ √ √
Evaluation of students
Component Duration Weightage
Notice
Notice will be displayed on Notice Board near to Chamber.
Course Coordinator
CMP 302
Department : Chemical Engineering
Course Credits :1
I. Course description:
The core subject “Process Control and Instrumentation laboratory” provides knowledge on practical
performance of different control instruments through experimentation.
III. Objectives:
1. To make students aware of working of Different process control instruments through hands on training.
2. To make students to correlate theory and practical process control through principles, fundamental
concepts and by experimentation.
IV. Outcomes:
1 Students will be able to apply the knowledge of control theory for understanding the various processes,
carried out in the Chemical process industry.
2 Students demonstrate their ability of understanding the process control and its application by virtue of
experimentation.
3 Students will be able to learn due care and precautions in handling measuring instruments.
1. Interacting System
2. Non-Interacting System
I. Notice
Notice will be displayed on Notice Board near to Chamber and Chemical Engineering Notice Board.
Course Coordinator:
CMP 303
Department : Chemical Engineering
Course Credits :1
I. Course description:
Lab experiments on various equipments / instruments related to Mass Transfer Operations.
II. Pre-requisites:
None
III. Textbooks:
1. Mass Transfer Operations, Treybal R.E., McGraw Hill Book Co., New York 1980, 3rd Edition
2. Chemical Engineering Vol. I, II & III, Coulson J.M. and Richardson J.F., Pergamon Press, New
York 1977
3. Unit Operations of Chemical Engineering, McCabe W.L. and Smith J.C. & Harriot, McGraw Hill
Book Co., New York 1980, 5th Edition
4. Principles of Mass Transfer and Separation Process, Binay K. Dutta, PHI Learning Pvt. Ltd., New
Delhi, Eastern Economy Edition
5. Introduction to Chemical Engineering, Badger W.L. and Banchero J.T., Tata McGraw Hill Book Co.
IV. Objectives:
1. To give the hand-in-hand experience of lab scale experiments on various equipments based on the
theoretical understanding and its application learned in Theory Course.
2. To understand the scaling approach of understanding from Experimental to Industry applications.
3. To develop the students ability regarding analytical and data interpretation skills.
4. To develop the discipline, sincerity, perfection and dedication towards works/assignment/aim
among students.
5. To make students ready to work in industrial environment providing the lab training.
V. Outcomes:
Students will gain practical knowledge of experimental methods. It is expected that students will be able
to plan an appropriate approach to experiment work, adapt original plans in the light of preliminary
findings, demonstrate safe working in the choice of method and apparatus, handle apparatus and
substances correctly and safely, make measurements to an appropriate degree of accuracy and precision,
collect information to arrive at a final conclusion, appraise critically the experimental work, including
identification of, and accounting for, anomalous results and experimental error, and suggest related
improvements to methods, to write up an appropriate concise report.
VI. Expanded Course description:
List of Experiments:
1. To determine the Mass Transfer coefficient for Absorption of CO2 in NaOH solution in packed Column.
2. Study of adsorption of acetic acid on activated charcoal [To verify adsorption isotherms].
3. To determine the number of Heat Transfer Units (HTU) & height equivalent to Theoretical plate
(HETP) of Packed distillation column.
4. To study the drying characteristics curve under constant drying condition in rotary vacuum or tray dryer.
5. Diffusion (Liquid – Liquid) –To calculate the diffusion coefficient of vapour in still Air.
6. To study the characteristics of Boiling point diagram.
7. To study the characteristics Cooling Tower experiment.
8. Experiments on Differential Distillation.
9. To determine rate of distillation by Steam Distillation.
10. Performance evaluation of fluid bed dryer.
11. Study of factors affecting rate of Evaporation :-
i) Effect of Surface Area.
ii) Effect of Temperature.
12. Solid liquid extraction
13. Liquid – Liquid Extraction– To determine Overall efficiency for a three stage counter-current and cross
current system.
14. Diffusion (Liquid–Air):- To find the diffusion coefficient of vapour instill air.
15. Experiments on Fractional Crystallization.
16. Spray Column Dryer:- To study the Design and operating Principles of Spray Dryer.
17. Plate Column Distillation :- to study the Performance of a rectification column.
18. Determination of Rate of drying, Free moisture content and bound moisture content.
Total Experiments to be conducted / designed: 8-10
a b c d e f g h i
1 √ √ √ √ √ √
2 √ √ √ √ √ √ √
3 √ √ √ √ √
4 √ √ √ √ √ √ √
5 √ √ √ √
CMP 321
Department : Chemical Engineering
Course Credits :3
I. Course description:
The course covers two aspects:
a) Basic economic analysis of a chemical plant and various profitability criteria
b) Safety and operability issues in a chemical plant and their incorporation in plant design
The students will be required to complete a design dissertation as a part of evaluation.
II. Pre-requisites: Heat Transfer, Advance Heat Transfer, Chemical Reaction Engineering –I and II, Mass
Transfer I and II, Fluid mechanics, Process Control
III. Textbooks:
R Turton, R Balie, W B Whiting, J Shaeiwitz, D Bhattacharya Prentice Hall (4th Edition) Analysis,
Synthesis, and Design of Chemical Processes 2013
Reference books:
J.M. Coulson, JF Richardson, RK Sinnott Butterworth Heinman, Chemical Engineering Volume 6, Revised
Second Edition, Butterworth-Heinemann, 1996
M Peters, K Timmerhaus, R West McGraw Hill (5th Edition) Plant Design and Economics for Chemical
Engineers, 2011
IV. Objectives:
Objective of this subject is to expose students to basic concepts in engineering economics, plant design, safety
features and its application to chemical engineering.
V. Outcomes:
After the course students will be able:
1) to read complex P&ID diagrams and develop a chemical process from scratch
2) to perform a complete economic analysis of a proposed chemical plant
3) to appreciate the importance of safety and incorporate safety features in design and convey
4) to appreciate that the chemical plants are not always run at design conditions and will experience faults
5) to write and present a design dissertation
VI. Expanded Course description:
Block flow diagram, process flow diagram, piping and instrumentation diagram (P&ID)
Conceptual design and synthesis of a process flow diagram, development of PFD from generic BFD
Plant layout, location and site selection
Estimation of capital costs, purchased equipment costs, total capital cost of a plant, bare module cost-
base and non-base conditions, estimation of manufacturing costs, cost of labor, utility cost, raw material
costs,
Investment and the time value of money, different types of interest, cash flow diagrams, inflation,
Annuities, depreciation, taxation, profitability analysis, criteria for profitability for large projects, net
present value, rate of return, evaluation of equipment alternatives, evaluation of risks, sensitivity and
uncertainty analysis.
Safety design: Major chemical industry disasters, safety hierarchy, basic process control safety, Alarms,
SIS (safety interlock system), HAZOP, safety valves
Operability issues and troubleshooting in a chemical plant
Introduction to computer aided flow sheeting
VII. Class Schedule : Three classes a week each of 55 min
VIII. Relationship of Course Outcome to Program Outcomes:
Course Outcome Programme outcomes
a b c d e f g h i
1 √
2 √ √ √
3 √ √ √
4 √ √
5 √ √ √
Design Dissertation - 20
XI. Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CML 403
Department : Chemical Engineering
Course Credits :1
Objective: Objective of this subject is to expose students to understand and perform the experiments related to
the basic mass transfer and its application to chemical engineering
Syllabus:
REFERENCES
1. Seader J. D., Henley E. J., Separation Process Principles, Wiley, 2001, 2nd Edition
2. Richardson J. F., Harker J. H., Chemical Engineering Vol. 2, Elsevier, 2002, 5th Edition.
3. Mukhopadhyay M., Natural Extract using Supercritical CO2, CRC Press, 2000, 1 st Edition.
4. Nath K., Membrane Separation Processes, Prentice Hall of India, 2008, 1st Edition.
5. Sivasankar B., Bio-separations: Principles and Techniques, Prentice Hall of India, 2005, 1st Edition.
6. International Research Papers
Class Schedule
Two hours per week.
Relationship of Course Objectives to Program Outcomes:
Course Objectives Programme outcomes
a b c d e f g h i
1 √ √ √ √ √ √
2 √ √ √ √ √ √ √
3 √ √ √ √ √
4 √ √ √ √ √ √ √
5 √ √ √ √
Evaluation of students
Component Duration Weightage
Notice
Notice will be displayed on Notice Board near to Chamber and Chemical Engineering Notice Board.
Course Coordinator:
CMP 401
Department : Chemical Engineering
Course Credits :1
I. Course description: The course covers symbols used in Drawing, Design and Drawing of
various chemical equipments and accessories like storage tank, Jacketed vessel, reaction vessel,
coils, gasket, pressure vessel, supports, Agitator, etc. Minimum 10-12 Imperial size sheets ( A-1) covering the
above syllabus should be drawn out of which 1/3 rd should be drawn using computer software like AutoCAD.
II. Pre-requisites: none
III. Textbooks:
1. Joshi M.V., Mahajan V.V. Process Equipment Design MacMillan India Ltd
2. Khurmi R.S ,Gupta J.M., , A text book of machine design S.Chand &Company Ltd, New Delhi
3. Dawande S.D. Process Design of Equipments volume 1&2 Central Techno Publication, Nagpur
IV. Objectives:
1. To learn how to use and draw basic Standard equipment symbols and Standard instrumentation symbols
used in chemical process industry.
2. To study how to design and draw Heads and closures, Keys and couplings, Supports for vessels- like
Bracket Support, Leg Support, Skirt Support and packed absorption tower.
3. To learn how draw, Riveted joints, Welded joints and other types of joints
V. Outcomes:
At the end of course students exhibit how to use and draw basic standard equipment symbols and standard
instrumentation symbols used in chemical process industry and in a competitive manner how to design
and draw Heads and closures, Keys and couplings, Supports for vessels- like Bracket Support, Leg
Support, Skirt Support and packed absorption tower and also demonstrate the use of drawing Pipe fittings,
Riveted joints, Welded joints and Pressure relief devices.
2. Type of joints
3. Types of Heads and Storage vessel
4. Types of Supports
XI. Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CMP453
Department : Chemical Engineering
Course Credits :2
Objective: Objective of this subject is to expose students to apply the all skills to solve given problem
Syllabus: Student will select topic in consultation with project advisor and work on this topic
1 √ √
2 √ √
3 √
4 √ √
5 √ √
Evaluation of students
Component Duration Weightage
XII. Notice
Notice will be displayed on Notice Board near to Chamber.
Course Coordinator
CMP 403
Department : Chemical Engineering
Course Credits :1
I. Course description:
Drawing sheets on chemical equipments and flow sheets such as heat exchanger, distillation column, jacketed
vessel, agitated vertical column, evaporator, fermentor, reactor cyclone separator, autoclave, dryer, pump, flow
sheets.
Minimum 10-12 Imperial size sheets ( A-1) covering the above syllabus should be drawn out of which 1/3rd should be
drawn using computer software like AutoCAD.
II. Pre-requisites:
CML 353 Chemical Process Equipment Design
III. Textbooks:
1. Joshi M.V., Mahajan V.V, Process Equipment Design, Macmillan India Ltd
2. Khurmi R.S ,Gupta J.M. A Text Book Of Machine Design, S.Chand &Company Ltd, New Delhi
3. Dawande S.D. Process Design of Equipments, Central Tecno Publication, Nagpur.
IV. Objectives:
1) To understand knowledge of unit operation and processes
V. Outcomes:
At the end of the sheets, the student will understand the basic concepts and operations of various
chemical equipments and flow sheets related to chemical engineering design and drawing.
Preparation of working drawing part list & assembly drawings of plant layouts and piping drawing,
device drawing.
Minimum 10-12 Imperial size sheets ( A-1) covering the above syllabus should be drawn out of which
1/3rd should be drawn using computer software like AutoCAD.
VII. Total Sheets to be drawn : Ten
1 √ √
2 √ √
3 √
4 √ √
5 √ √
X. Evaluation of students
Component Duration Weightage
XII. Notice
Notice will be displayed on Notice Board near to Chamber.
Course Coordinator
CMP 403
Department : Chemical Engineering
Course Credits :4
Objective: Objective of this subject is to expose students to apply the all skills to solve given problem
Syllabus: Student will select topic in consultation with project advisor and work on this topic
1 √ √
2 √ √
3 √
4 √ √
5 √ √
Evaluation of students
Component Duration Weightage
XII. Notice
Notice will be displayed on Notice Board near to Chamber.
Course Coordinator
CMP 405
Electives
Electives Courses
CML429 Nanotechnology 3
CMP429 Nanocomposite Technology Lab 1
Course Credits :3
Objective: Objective of this subject is to expose students to understand the basic numerical analysis, probability
study and its application to chemical engineering
Syllabus: The objective of this subject is to expose student to understand the basic importance of numerical
methods to tackle the problems which cannot be solved analytically. It also focuses the probability theory and
its applications in science and engineering.
Numerical Analysis: Solutions of algebraic and transcendental equations by Iteration method, method of false
position,
Newton-Raphson method and their convergence. Solutions of system of linear equations by Gauss elimination
method, Gauss Seidal method, LU decomposition method. Newton- Raphson method for system of nonlinear
equations. Eigen values and eigen vectors : Power and Jacobi methods. Numerical solution of ordinary
differential equations: Taylor’s series method, Euler’s modified method, Runge-Kutta method, Adam’s
Bashforth and Adam’s Moulton, Milne’s predictor corrector method. Boundary value problems: Shooting
method, finite difference methods.
Probability theory:
Random variables, discrete and continuous random variable, probability density function; probability
distribution function for discrete and continuous random variable joint distributions. Definition of mathematical
expectation, functions of random variables, The variance and standard deviations, moment generating function
other measures of central tendency and dispersion, Skewness and Kurtosis. Binomial, Geometric distribution,
Poisson distribution, Relation between Binomial and Poisson’s distribution, Normal distribution, Relation
between Binomial and Normal distribution. Random processes, continuous and discrete, determinism,
stationarity, ergodicity etc. correlation functions, autocorrelation and cross-correlation, properties and
applications of correlation functions.
Text Books:
1. Jain, Iyengar and Jain : Numerical Methods for Engineers and Scientists, Wiley Eastern,1995
2. V.K. Rohatgi and A.K.M. Ehsanes Sateh: An Introduction to Probabability and Statistics, John Wiley &
Sons.
Reference Books
1. S. D. Cante and C. de Boor, Elementary Numerical Analysis, an algorithmic approach, McGraw-Hill, 2000.
2. Gerald and Wheatley : Applied Numerical Analysis, Addison-Wesley, 1999.
3. Spiegel, M.R.; Theory and problems of Probability and statistics; McGraw-Hill Book Company; 1980.
4. K.S. Trivedi: Probability Statistics with Reliability, Queuing and Computer Science applications, Prentice
Hall of India
Class Schedule
Three 55 minutes session per week.
Evaluation of students
Component Duration Weightage
Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
MAL205
Department : Chemical Engineering
Course Credits :3
I. Course description:
The course covers the fundamentals of different kinds of materials used in chemical industries, their physical
and chemical interactions under various service conditions, testing and maintenance.
III. Textbooks:
1. Introduction to material science, James F. Shacketford, McMillan publishing company, New York ISBN
1990.
2. Properties of Engg. Materials, Jestrazebaski D.Z., Toppers. Co. Ltd. 3rd edition.
IV. Objectives:
1. To provide basic knowledge and application of different type of materials.
2. To study short-term and long-term mechanical behavior of materials.
3. To understand the science behind the failure of materials.
4. To provide knowledge on different heat treatment techniques.
5. To understand the types of corrosion and methods to prevent it.
V. Outcomes:
Students shall have a solid knowledge basis in physical and chemical properties of different types of materials.
They shall understand the development of science and technology of materials in chemical industry from time
to time.
Introduction : Introduction to materials and their principle properties, Simple stresses and strains, Concept of
stress, strain, shear stress, shear strain, Hook’s law, Elastic limit, stress-strain curve for mild steel and
elastomeric materials, factor of safety, Poisson’s ratio, Strain energy
Basic principles in their selection for fabrication and erection of chemical plant: Testing of materials,
destructive and non-destructive tests, structure of atom and chemical bonds, crystal structures and their
influence on material properties, Deformation and slip processes. Special diffusion process : Aluminizing,
Electroplating-hard chrome & nickel plating - Hard dip coating, Cladding - Physical and chemical vapour
deposition - Metal spraying , Plastics and rubber coating ,Conversion coating , Coating of tools ,TiC, TiN,
Alumina and diamond coating of tools ,Selection of coating of tools , Selection of coating for wear and
corrosion resistance.
Metals and their alloys: Iron–carbon diagram, Ferrous and nonferrous alloys, Fe-C diagram, mild steel, special
steels, stainless steels, brasses, aluminium alloys and titanium alloys, high and low temperature material,
insulation, refractories. Selection of the steel, Heat treatment of steel, Proper design for proper heat treatment ,
Critical temperature and heating - Annealing- Spheroidzing- normalizing , hardening -Isothermal
transformations , TTT diagram - tempering - austempering - martempering and ausforming. Heat treatment of
corrosion - resistance steels. Hardenability and its testing, hard material alloys, Types of structure and their
specific volume. Effect of temperature on mechanical properties various methods of improving the strength for
service conditions. Effect of alloying elements on properties of steel. Alloys of copper, aluminium, magnesium,
nickel and zinc, compositions and their uses.
Corrosion and its control: Different types of corrosion: chemical, biochemical, and electrochemical; Internal
and external factors affecting corrosion of chemical equipments. Corrosion factors, inhibition, prevention,
control and testing, Corrosion behaviour of metals and alloys. Forming processes and corrosion. Fracture in
Ductile and Brittle materials, creep, mechanisms of creep and methods to reduce creeping in materials, creep
rate and relations. Fatigue-mechanism- methods to improve fatigue resistance in materials. Composite
materials, types, stress-strain relations in composite materials, applications.
Polymers, natural & synthetic: Selection of polymeric materials for equipment linings, fiber reinforced
plastic, application of special polymers like Nylon 66, Teflon in engineering. Elastomers and plastomers,
molecular structure and properties of polymers.
Ceramic and glasses: Crystalline and non-crystalline ceramics, silicates, refractories, clays, cements, glass
vitreous silica, and borosilicate, Ceramic
XI. Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CML231
Department : Chemical Engineering
Course Credits : 3
Objective: Objective of this subject is to expose students to understand basic application for commonly used
software package and its application to chemical engineering
Syllabus:
Manipulating Matrices-Matrices and Magic squares, Expressions, Working with Matrices, More about
Matrices and Arrays, Controlling commnad window input and output; Graphics-Basic plotting, Editing plots,
Mesh and surface plots, Printing and Handling the Graphics.
Programming with MATLAB-Flow control, Other data structures, Scripts and Functions.
Examples of Chemical engineering solved problems using MATLAB-Equations of state, Vapour liquid
equilibrium, Chemical reaction equilibria, Reaction-kinetic system, Transport processes, etc.
Text Boks
1. Rudra Pratap, Getting Started with MATLAB7: A Quick Introduction for Scientists and Engineers, Oxford
University Press, Newdelhi, India
2. Andrew Knight, Basics of MATLAB and Beyond, Chapman & Hall/CRC press LLC., 2000
3. W. Fred Ramirez, Computational Methods in Process Simulation, Elsevier Science & Technology Books
Class Schedule
Three 55 minutes session per week.
Relationship of Course Objectives to Program Outcomes:
Course Program outcomes
objectives a b c d e f g h i
1
2
3
4
5
Evaluation of students
Component Duration Weightage
CML232
Department : Chemical Engineering
Course Credits :3
I. Course description:
The aim of this course is to make students aware about the environmental problems, methods to treat the
wastes and also develop analytical ability to identify and solve the environmental problems mainly related
with chemical industry.
Pre-requisites: None
II. Textbooks:
1. Mahajan S.P. Pollution Control in Process Industries, Tata McGraw Hill Book Co.
2. Pandey G.N. and Camey G.C.; Environmental Engineering, Tata – McGraw Hill Book Co., New Delhi
(1989)
3. David L; Weber W.J. Environmental Engineering Handbook, Physico – Chemical Processes for Water
Quality Control,Lewis Publishers.
4. Sincero A., Environmental Engineering, A Design Approach. , Prentice – Hall of India, New Delhi (1996)
III. Objective:
To study the interrelationship between living organism and environment, natural resources, pollution control
and waste management.
IV. Outcomes:
1. Understand key current environmental problems.
2. Be able to analyse an industrial activity and identify the environmental problems.
3. Be able to plan strategies to control, reduce and monitor pollution.
4. Be able to select the most appropriate technique to purify and/or control the emission of pollutants.
5. Be conversant with basic environmental legislation.
1. Man and environment, biogeochemical cycles, Biosphere and ecosystem, Forest Nutrient cycles and the
parameters responsible for the disturbance of these cycles.
2. Mobile and stationary sources of air pollutants, air pollution, behaviour of pollutants and atmospheric
chemical reactions, air pollution control processes, atmospheric dispersion of pollutants, models for
dispersion, limitations of models, effective stack height concept, gas sampling and analysis.
3. CO, CO2, H2S, SOx, NOx emissions and their control, desulphurization. Sources of water and pollutants,
classification and characterization of solid, liquid and gaseous waste, measurement of levels of pollution
such as DO, BOD, COD, TOC,ThOD, soluble and suspended volatile solids, Water quality and discharge
standards.Unit operations such as screening, coagulation, flocculation, filtration, clarification, solvent
extraction.
4. Chemical treatment of waste material, oxidation, chlorination, Ozonation, incineration etc. Biological
Treatment,biochemical kinetics, microbial kinetics, microbial growth.
5. Aerobic and anaerobic waste treatment, activated sludge process, aerated lagoons, anaerobic digesters,
Biogas & trickling filters & its utilization. Solid Waste & its disposal pyrolysis (Incineration, Composing
and filling etc.).
6. Measuring environmental impacts, life cycle analysis, legislation controlling discharges, optimal degree of
abatement, and policies for regulation of environmental impacts.
X X X X X
X X X X X
X X X X X X X
X X X X X X X X
X X X X
Project 20
X. Notices
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CML233
Department : Chemical Engineering
Course Credits :3
I. Course description:
Our objective is to discuss engineering aspects of industrial Pollution Control Technologies. The emphasis in
this course will be the control of gaseous ,liquid and solid pollutants.
III. Textbooks:
1. Industrial Waste Treatment,Nemerow N.L,Butterworth-Heinemann,1st
2. Pollution Control in Process Industries,S. P. Mahajan,Tata McGraw Hill ,1st
3. Industrial Waste Treatment Handbook,Frank Woodard,Butterworth-Heinemann, 1st
4. Environmntal pollution control engineering,C.S.Rao,New Age International, 2nd
5. Industrial Pollution Prevention Handbook, Freeman H. M.,McGraw Hill,1st
IV. Objectives:
1. To understand the effect of air, water and solid pollutant on public health and on environment.
2. To study the different methods of sampling.
3. To describe the different control strategies to protect the ecosystem from adverse effect of pollutants.
4. To identify waste management practices and technologies adapted by different industries.
V. Outcomes:
1. Student will gain the knowledge of adverse effect of different pollutants on public health and on
ecosystem.
2. Students will learn the different methods of collection and measurement of air pollutant.
3. Students will learn different methods to control the different pollutants.
4. Students will gain the knowledge of conventional methods as well as new methods to control the
pollution.
Methods for Treating industrial waste gases or air discharges- physical method, chemical method, combined
method, biological method.
Solid and Hazardous wastes: definitions, concepts. Incineration, recycling, composting, landfill, On-Site
Monitoring and Analysis of Industrial Pollutants.
Case Studies:- Example (Treatment of Pharmaceutical Wastes, Treatment Refinery Wastes, Treatment of
Textile Wastes, Treatment of Pulp and Paper Mill Wastes, Treatment of Dairy Processing Wastewaters,
Treatment of Pesticide Industry Wastes, Food Waste Treatment, Treatment of Rubber Industry Wastes,
Treatment of Tannery Industry Wastes and Radioactive waste etc.).
XI. Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CML234
Department : Chemical Engineering
Course Credits :3
I. Course description:
The core subject CML 383 Advance Heat transfer covers the fundamental theory for the analysis of
heat transfer processes occurring in heat exchangers, evaporators, jacketed vessels, boilers, furnaces
and reactors, reboilers, agitated vessels with and without coils, packed and fluidized beds.
II. Pre-requisites:
Maths, Thermodynamics, Fluid Mechanics
III. Textbooks:
1. Hollman J.P.; Heat Transfer, McGraw Hill, 1993
2. Incropera F.P. Fundamentals of Heat and Mass Transfer 5th Edition Wiley India Pvt.Ltd Ltd.,2008
3. Cengel Y.A. Heat Transfer: A Practical Approach McGraw-Hill; 2 edition ,2002
4. Kern D.Q., Process Heat Transfer, Tata McGraw Hill Book Co., New Delhi, 1990.
5. Coulson J.M., Richardson J.R. Chemical Engineering, Vol. I 5th Edition, Butterworth Heinemann,
New Delhi.
6. Dutta B.K. Heat Transfer; Principles and Applications PHI Pvt.Ltd New Delhi ,2006
IV. Objectives:
1. To understand the fundamental theory of heat transfer processes occurring in heat exchangers,
evaporators, jacketed vessels, boilers, furnaces and reactors, reboilers, agitated vessels with and
without coils, packed and fluidized beds.
2. How to identify, formulate, and solve engineering problems involving heat transfer equipments.
3. How to apply energy balances and rate equations to model and analyze thermal systems.
V. Outcomes:
Students will gain fundamentals, design approach and its application for various heat exchangers,
evaporators, jacketed vessels, boilers, furnaces and reactors, reboilers, agitated vessels with and
without coils, packed and fluidized beds. Students will have knowledge of different types of heat
exchangers, evaporators and their suitability for particular applications, Students can estimate heat
exchanger performance given size and inlet conditions and design the geometry required to deliver a
desire heat transfer rate.
Fixed tube sheet, floated head and U–tube shell and tube heat exchangers, their design procedures, number
of passes in heat exchangers, fouling of heat exchangers, baffles in heat exchangers, selection of heating
and cooling media for heat exchangers, Troubleshooting of shell and tube heat exchangers, thermal
stresses and vibrations in shell and tube heat exchangers.
Plate heat exchangers, design procedure, advantages over shell and tube heat exchangers, spiral plate heat
exchangers, helical coil heat exchangers.
Heat Regenerators, fixed and fluidized bed, Evaporators types and their operational characteristics.
Single stage and multistage evaporation system, Steam economy, boiling point rise of solution and its
effect on evaporation system, rising film and falling film evaporators.
Effectiveness of heat exchanges, NTU method. Heat Transfer in jacketed vessels, boilers, furnaces and
reactors, reboilers, heat transfer in agitated vessels with and without coils, Heat transfer in packed and
fluidized beds.
Course Coordinator
CML383
Department : Chemical Engineering
Course Credits :3
I. Course description:
A brief review of the existing standards of safety in chemical process industries and the analysis of
event. Hazard identification, different analytical techniques of analysis of hazards regarding Fire and
Explosion and Chemical hazards in process industries. This course will terminate with much
understanding of the different aspects of safety and hazards and their analytical valuation for prevention
and standards for future.
II. Pre-requisites:
None
III. Textbooks:
1. Chemical Process Safety: Fundamentals with Applications, Daniel A. Crowl and Joseph F. Louvar,
Prentice Hall International Series, 2nd Edition
2. Safe and Efficient Plant Operation and Maintenance, Greene R., McGraw Hill Book Co., New York.
3. Safety Management and Practices for Hazardous Units, Dekkar Marcel, McGraw Hill Book Co., New
York, 1995
4. Safety and Good House Keeping, Saxena, National Productivity Council, New Delhi (1976), 3rd
Edition.
5. Safety in Process Plant Design, Wells G.L., George Godwin Ltd., (1980).
IV. Objectives:
1. To give knowledge of process plant safety, hazardous chemicals, fire and explosion hazards and
different methods of hazard identification and its analysis in qualitative and quantitative scales.
2. The students will introduce to personnel safety and case study problems.
3. To develop the social, ethical and environmental responsibility among the students.
4. To develop the safety concepts among the students with detailed understanding of technical
knowledge.
5. To develop the responsibility and ability for precautions and remedial actions for any untoward
event.
V. Outcomes:
At the end of the course, the student Students will gain knowledge of safety standards to be maintained at
process industries and handling of problems related to safety, different methods of hazard identification
and their analysis.
VI. Expanded Course description:
Introduction to process plant safety, handling of hazardous chemicals, Lower flammability limit (LFL),
UFL, LEL, UEL, TLV, electrostatic hazards, Hazard code and explosive limit, TWA, Ceiling level,
Safety in handling of gases, liquids and solids
Flammable liquid hazards, fire and explosion index, fire ball hazards, oil spillage hazards, Bleveuvce,
pool fires, jet fires, radiation hazards.
Explosion, emergency and disasters in chemical process plants, onsite and offsite emergency plan, Fire
detectors, smoke detectors.
Safely audit of chemical process plants, HAZOP studies, fault tree and event tree analysis.
Resources for combating fires, dry chemical powders, fire fighting foam, fixed and portable fire extinguishers,
FMEA.
Risk analysis of chemical processes, risk management, risk identification, personnel training, risk to
environment.
OSHA standards, importance of plant layout in safety, importance of site selection, personnel safety, role of
human error in losses. Case studies of fires, explosions, disasters in chemical process plants.
a b c d e f g h i
1 √ √ √ √ √ √
2 √ √ √ √ √ √ √ √ √
3 √ √ √ √
4 √ √ √ √
5 √ √ √ √ √ √ √ √
XI. Notice
Notice will be displayed on Notice Board near to Chamber and Chemical Engineering Notice Board.
Course Coordinator
CML384
Department : Chemical Engineering
Course Credits :3
I. Course description:
The core subject CML 222 Heat transfer covers concept of various forms of renewable energy, to
outline division aspects and utilization of renewable energy sources for both domestics and industrial
applications, to analyze the environmental and cost economics of using renewable energy sources
compared to fossil fuels.
II. Pre-requisites:
Thermodynamics, Heat Transfer
III. Textbooks:
1. Rai G.D, Solar Energy Utilization , Khanna Publishers, Delhi.
2. Rai G.D, Non-Conventional Energy Sources, Khanna Publishers, Delhi.
3. Twiddle J., Weir T., Renewable Energy Resources, Cambridge University Press, 1986.
4. Veziroglu, N., Alternative Energy Sources, Volume 5 & 6, McGraw-Hill, 1978
IV. Objectives:
1. To understand concept of various forms of renewable energy.
2. To outline division aspects and utilization of renewable energy sources for both domestics and
industrial applications.
3. To analyze the environmental and cost economics of using renewable energy sources compared to
fossil fuels.
V. Outcomes:
At the end of the course the student will have knowledge about various renewable energy sources, be
able to choose the appropriate renewable energy as an alternate for conventional power in any
application.
Solar Energy: Solar radiation and its measurement, characteristics and estimation, limitations in the
applications of Solar Energy, Collectors: flat plate and concentrating types, their comparative study;
design and material selection, efficiency, selective paints and surfaces. Solar water heater, applications
of Solar Energy for heating, drying, water desalination, solar concentrators, photovoltaic power
generation using silicon cells. Thermal storages, Solar ponds, solar pumps, Solar power, Solar cookers
etc. Direct conversion of solar energy to electricity and its various uses, materials, limitations and costs.
Bio- Fuels: Photosynthesis and generation of bio-gas, digesters and their design, selection of material;
feed to digester, pyrolytic gasification, production of hydrogen, algae production and their uses.
Wind Energy: Principle of energy from wind, availability, site selection, different types of wind
turbines, design criteria and material selection, economics.
Geo-Thermal Energy: Geo-technical wells and other resources dry rock and hot aquifer analysis,
harnessing geothermal energy resources
Tidal Energy: Its meaning, causes of tides and their energy potential, enhancement of tides, limitations,
different methods of using tidal power. Principles of ocean thermal energy conversion (OTEC) analysis
and sizing of heat exchangers for OTEC.
Ocean Thermal Energy: Principle of utilization and its limitations, description of few systems.
Other Non-conventional Energy Sources, fluidized bed combustion, heat from waste and other sources.
Energy Conservation: Principles of energy conservation. Familiarization with the different energy
conservation appliances and practices, improved cooking stoves, benefits of improved cooking stoves
over the traditional cooking stoves. Scope of energy conservation in the domestic, commercial and
agricultural sector.
XI. Notice
Notice will be displayed on Notice Board near to Chamber.
Course Coordinator
CML 385
Department : Chemical Engineering
Course Credits :3
I. Course description:
A consideration of the engineering and scientific basis for using cells or their components in engineered
systems. Central topics addressed include kinetics and reactor design for enzyme and cellular systems;
fundamentals, techniques, and bioseparations. Additional lectures will provide an introduction to metabolic
modeling as well as special topics. The course is designed to be accessible to students with engineering
backgrounds.
II. Pre-requisites: Mass Transfer, Chemical Reaction Engineering
III. Textbooks:
IV. Objectives:
1. To introduce the essential concepts of bioprocessing to traditional chemical engineers.
2. To make the student aware about advances in Biotechnology.
3. The Program encourages students to work in the field of biotechnology.
V. Outcomes:
Student will gain an ability to apply knowledge of mathematics, bioscience, and engineering. Students will learn
to apply the principles of biology, engineering science, along with problem solving skills and critical thinking to
a broad spectrum of problems in biotechnology.
Enzyme technology and kinetics, enzyme catalysis, enzyme applications in industries and medicines,
metabolism and bioenergetics, photosynthesis, synthesis and regulation of bimolecular, fundamentals of
microgenetics, role of DNA and RNA.
Reactions catalyzed by enzymes, types of reactors such as CFSTR, Plug flow.
Introduction to Bioreactor design, scale up of bioreactions and bioreactors, volumetric mass transfer rate of
oxygen from air bubbles, respiratory model for mycellial pallet, mechanical mixing, aeration, power
consumption, heat transfer in bio reactor.
Sterilization techniques, media and air sterilization, death rate of micro organisms.
Bioreactor modeling and simulation. Design for bioproducts, applications in biochemical and biomedical
engineering.
Downstream processing in biochemical industries: such as separation processes for bulk chemicals unit
operations such as Ultra filtration, Aqueous two phase extraction.
XI. Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CML386
Department : Chemical Engineering
Course Credits :3
I. Course description:
This course mainly deals with basics and application of various analytical equipments like, gas chromatography,
liquid chromatography, gas chromatography mass spectroscopy, liquid chromatography mass spectroscopy, UV
visible Spectrophotometer and infra red spectrophotometer etc.
II. Pre-requisites: Basic courses in Fluid mechanics, Heat Transfer and Mass Transfer
III. Textbooks:
1) Harris, D.C., Quantitative Chemical Analysis, 7th Edition, W.H.Freeman and company, New York
2006.
2) Bruno, T.J, and Svoronos, P. D. N., Handbook of Basic Tables for Chemical Analysis, 2nd Edition,
CRC Press, New York 2003.
3) McNair, H. M. and Miller, J. M., Basic Gas Chromatography, 1st Edition, John Willy and Sons, Inc,
Singapore, 1998.
4) Palvia D. L., Lampman G. M., Kriz G. S. and Vyvyan J. R., Introduction to Spectroscopy, 4th Edition,
Brooks/Cole, Belmont USA, 2009.
5) Snyder L. R, and Krikland J. J., Introduction to Modern Liquid Chromatography, 2nd Edition, A
Wiley Inetrscience Publication, New York, 1979.
IV. Objectives:
1) To understand the fundamental analytical chemistry for instrumentation
2) To understand the basic processes used in Instrumental Analytical Techniques
3) To understand the basic working principle of some important analytical instruments like GC, GCMS,
LC, LCMS, FTIT, UV-Vis etc
V. Outcomes:
Student will understand basic fundamental and operating principle for different analytical instruments like GC,
GCMS, LC, LCMS, FTIT, UV-Vis etc.
Extraction methods such as liquid-liquid extraction, solid phase extraction, super-critical fluid extraction and
accelerated solvent extraction. Cleanup and fractionation methods.
Introduction to Chromatography, high-pressure liquid chromatography (HPLC), gas chromatography (GC) and
other chromatographic methods. Detector types with focus on mass spectrometry and hyphenated techniques
such as GC-MS and LC-MS.
Introduction to spectroscopic methods (UV-VIS, IR, X-ray, atomic absorption spectroscopy (AAS) and
inductive coupled plasma mass spectrometry).
Introduction to data processing, errors in chemical analyses, statistical analyses (including chemometrics) and
data presentation. Method development, evaluation, validation and QA/QC measures. Uncertainty analysis.
XI. Notice
To be announce in the class
Course Coordinator
CML387
Department : Chemical Engineering
Course Credits :3
Course description
The course focuses on innovative engineering design in a team-based, cross-disciplinary setting.
“Innovative Design” implies both identifying and solving real – world problems for real people. The course
engages students with a real problem, which has no given solution in an industrial / social context, develop
social and collaborative skills, introduce new product development methods in a project environment.
The course emphasizes the use of Project Based Learning where students participate in active and
experiential learning through real product development situations. It will start with an open-ended situation
of identifying a problem to solve and eventually end with a possible solution that may be implemented.
Objectives
Outcomes
Course Outline
The course Includes following topics
1. Orientation
Designing attitude in day-to-day life
Design thinking
Social responsibility for product design
Case Studies of successful designs
Movie/Documentary Screening
Project 1 Submission & Presentation
2. Problem Mapping
Knowing problems
Searching problems
Project 2 Submission & Presentation
3. Ideation Stage
Defining the Problem Statement
Available solution
Prioritizing Solutions
PAS of shortlisted solutions and their feasibility study
Proposed Solutions
Project 3 Submission & Presentation
Detail course description
1. Orientation
Everybody design/innovate/ jugaad on almost daily basis, examples of everyday research, survey,
observations, experimentation and problem solving
Design thinking:
Case studies of grass root innovators, UG students of solving real life problems.
Movie/Documentary Screening
2. Problem Mapping
Knowing problems:
What is the problem? How do people deal with it now? Key pain points?
Understanding user context ( social, family, community, ecological, cultural, institutional, technological,
political-economic etc.,)
Searching problems
3. Ideation Stage
Available solution
Seeking solutions from existing designs, embedded thumb rules in people’s practices, nature’s patterns
and strategies; constellation of technological, institutional, cultural and ecological endowments in which
local practice is embedded
Mapping of all possible solutions to the problem begin with optimal, wishful thinking, Sub-optimise
the ideal solution on the basis of constraints of cost, environment, ease of operation, affordability,
maintenance, and other dimensions
Prioritizing Solutions
Textbooks
1) Ulrich, Karl T. and Steven D. Eppinger, Product Design and Development, 5th edition
(2012),Irwin/McGraw-Hill
2) Sir Peter Medawar, .Advice to Young Scientist, Alfred P. Sloan Foundation Series, Edition 1 st
3) Santiago Ramón Cajal , Advice to Young Investigator, The MIT Press, Edition 1st
Websites
Evaluation scheme
Class 15%
participation (Individual)
Teaching Modes
Lectures, videos, case studies, small group discussions and exercises. Students are expected to read the assigned
chapters and papers before class and to participate actively in class discussions. The sessions are conducted
interactively and thus may not follow strictly the presentations slides issued.
Prerequisite:
2nd and 3rd year students of Chemical, Mechanical, Civil, & Metallurgy students
Justification of course
Kakodkar committee has recommended Design Spine in its report ( Annexure V) an elementary course is
developed based on the recommendations of the Kakodkar committee.
The course was developed by referring “Innovation Enterprise I ” offered in National University of Singapore.
The proposed module is reviewed by Professor Prahlad Vedakkepat who teaches this course in NUS.
Course Coordinator
CML393
Department : : Chemical Engineering
Course Credits : :3
Objectives
The objective of this course is to familiarize the students with basic working principal and construction of
various measuring instrument used in Process industry.
Outcomes
Upon completion of this course, students will acquire knowledge about to:
2.Pressure Measurement: Definition and units; Relationship between absolute, atmospheric and gauge
pressures; Relationship between height of a column of liquid and pressure; Use of manometers for
pressure measurement; Principle of operation and installation of the following pressure gauges: diaphragm
gauges, bellows gauges, Bourdon gauges, strain gauges; Gauge calibration using manometers, dead-
weight testers, portable field calibrators and comparators; Pressure transmitters: standard pneumatic and
electrical signals.
3.Level Measurement: Factors influencing level measurement; Direct level measuring systems: the dip
stick, the sight glass, floats; Pressure operated systems: purged dip pipe, diaphragm box, differential
pressure transmitter, manometer; Suitability of specific devices for different liquid conditions;
Relationship between level and content (volume and mass) for spherical and cylindrical tanks.
4.Flow Measurement: Volume and mass flow rate; Turbulent flow, streamlined flow and Reynolds
number; The Continuity Equation, Bernoulli’s Equation and application to differential pressure devices;
Differential pressure primary elements: orifice plate, Venturi tube, Dall tube, flow nozzle and pitot-static
tube; Installation procedures; Positive displacement flow meters: reciprocating piston, rotating impeller,
semi-rotary type; Variable area flow meters; Flow integration and linearization; Calibration of liquid flow
meters: volumetric tank, gravimetric tank, pipe prover, reference meter, standing start and finish, flying
start and finish.
6. Control valve: Pressure drop across the valve, valve noise, flow characteristics of linear & equal
percentage control valves on load changes. Control valve selection, Seat leakage & calibration.
Textbooks
2. Temperature Measurement, L. Michalski, John Wiley & Sons, (2001), ISBN: 0471867799
3. Industrial Flow Measurement, 3rd Edition, David W. Spitzer, ISA (2000) ISBN: 1556178719
4. Measurement and Control Basics,3rd Edition, T. A. Hughes, ISA (2002) ISBN: 155617764X
Reference Book
1. Instrument Engineers’ Handbook 4th Edition – Process Measurement and Analysis, Volume 1,B.G.
Liptak, ISA, (2003), ISBN: 0849310830.
Class schedule
Design Project 25
Video making 05
Course Coordinator
CML394
Department : Chemical Engineering
Course Credits :3
Objective: Objective of this subject is to expose students to understand basic polymeric material, its properties
and its application to chemical engineering
Syllabus: Introduction to Polymeric Materials : Structure of polymers - Linear, branched, cross linked,
classification of polymers.
Polymerisation Types and Techniques: Distinctive features of addition and condensation polymerisation,
Mechanisms of addition polymerisation, radical, Ionic, Co-ordination, Copolymerisation. Block & graft
copolymers. Chemistry of thermoplastic and thermosetting polymers, Solid State polymerisation. Advanced
polymerization techniques using Ziegler-Natta catalysts, metallocenes etc. Bulk, solution, suspension and
emulsion polymerization technique. Polymer Processing: Analysis of polymer processing. rheology of
polymers, flow in tubes, calendaring, extrusion, injection modeling, fiber spinning, and coating.
Polymer Structure – Property - Relationships: Effect of chemical composition on various properties of Polymer,
Mechanical properties: Stress-strain in polymers, elasticity, tensile strength;Transition Properties : Glass
transition (Tg), melt transition (Tm);Electrical Properties : Dielectric constant, power factor, dissipation factor;
Optical Properties: Chemical Properties : Cohesive energy, solubility parameter, Polymer toxicity; Physical
properties of polymers and adhesives. Phenolic, Epoxy and Polyurethane structural adhesives.
Engineering and Speciality Polymers: Polyolefins; Polyamide; Biopolymer : Insulating Polymers; Polymer
blend and alloys; Inorganic polymers; Conducting polymers.
Polymer Composite: Fundamentals of polymer composites, Different type of Polymer Composites, Different
reinforcement and matrices, fiber and polymer matrix properties, interfacial adhesion, and manufacturing.
References
1. BillMeyer F. W., Textbook of polymer science,3 rd edition, John Wiley & Sons
2. Gowarikar V.R. and Viswanathan N.V., Jayadav Sreedhar ,Polymer Science, Wiley Eastern Limited.
Evaluation of students
Component Duration Weightage
Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CHL336
Department : Chemical Engineering
Course Credits :3
Objective: Objective of this subject is to expose students to understand basic advancement in technology with
less environmental damage and its application to chemical engineering
Syllabus: Introduction to environmental issues- Air, Water, Land, Biodiversity, Solid waste, Air quality issues
– NOx, HCs and VOCs. Ground level ozone, Pb, particulates, SOx, NOx and acid deposition; Water Quality
issues Ecology; Waste flows – sources, trends, preventive environmental management, (PEM). Global
environmental and energy issues, Global warming, Ozone depletion.
Environmental Laws and Regulations – Indian rules and regulations; Indian scenario vis-à-vis global
scenario paradigm shift from end – of – pipe to front - end pollution prevention and waste minimization.
Green Chemistry - Green Chemistry principles and methodologies – alternative feedstocks, green solvents,
synthesis pathways, inherently safer chemistry; Environmental ethics – roles and responsibilities of chemical
engineers for chemical process safety and environmental protection, Industrial ecology.
Evaluation and Improvement of Environmental Performance of Chemical Processes - Evaluation of
environmental fate, estimation of ecosystem risks, classification of environmental risks. Evaluation of
exposures–workplace characterization, exposure pathways, monitoring worker exposure, Designing safer
chemicals; Design for environment (DFE), Life cycle assessment.
Green Engineering: Principles of green engineering, pollution prevention for chemical reactors; pollution
prevention in storage tanks and fugitive emission; pollution prevention assessment. Assessment of
environmental performance, Concepts of sustainability and sustainable processes.
Flowsheet Analysis for Pollution Prevention and evaluation of Environmental performance of a flow sheet:
Process and energy integration; optimizing strategies for segregation, mixing and recycling of streams;
Evaluation of environmental performance of a flow sheet – Fugacity capacity, intermedia transport, reaction
loss processes, Metrics for environmental risk evaluation of process design with respect to environment.
References
1. Ahluwalia V.K. and Kidwai M. New Trends in Green Chemistry, Anamaya Publishers, New Delhi
2. Anastas P.T. and Williamson T.C. Green Chemistry, Frontiers in Benign Chemical Synthesis and
Processes, Oxford University Press (1998)
3. David T. Allen & David R Shonnard, Green Engineering: Environmentally Conscious Design of
Chemical Process, Prentice Hall PTR.
4. Lancaster M (Mike), Green Chemistry: An Introductory Text, Royal Society of Chemistry, 2002.
Evaluation of students
Component Duration Weightage
Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CHL369
Department : Chemical Engineering
Course Credits :3
I. Course description:
The course covers the major utilities required for process plants such as water and its treatment, properties of
steam and boiler performance, different refrigerants and refrigeration cycle , air compressor and psychometric
properties. It also involves the basic calculations for evaluating the performance of steam generation,
refrigeration, compressor and cooling tower.
III. Textbooks:
1. Chattopadhya Boiler operations Tata McGraw Hill, New Delhi
IV. Objectives:
1. State the principles involved during water treatment, generation of steam and its uses, refrigeration cycles.
2. Describe the different equipments used to run the process plant with different utilities.
3. Acquire the knowledge for selection of different utilities.
4. Understand basic calculation involved in steam generation, psychometric operation and refrigeration
V. Outcomes:
At the end of the course student will be able to describe the different utilities used to run the process plant.
Acquire the knowledge for selection of different utilities. Understand basic calculation involved in steam
generation, psychometric operation, cooling tower and refrigeration.
1. Importance of utilities :
Sources of water, hard and soft water , Requisites of industrial water and its uses, Methods of water treatment,
Chemical softening, Demineralization, Resins used for water softening, Reverse osmosis and membrane
separation, Effects of impure boiler feed water & its treatments., Scale & sludge formation, Corrosion, Priming
& foaming, Caustic embrittlement.
2. Refrigeration:
Refrigeration cycles 04, Different methods of refrigeration used in industry, Vapour compression, Vapour
absorption: Lithium bromide (eco-Friendly)‘ Different refrigerants‘ Monochlorodifluoro methane (R-22)‘
Chlorofluorocarbons (CFC-Free) ‘ Secondary refrigerants: Brines’ Simple calculation of C.O.P. Refrigerating
effects.
Properties of steam, Problems based on enthalpy calculation for wet, steam, dry saturated steam, superheated
steam,, Types of steam generator / boilers: water tube & fire tube, Solid fuel fired boiler. , waste gas fired
boiler., Waste heat boiler., Fluidized bed boiler., Scaling, trouble shooting, preparing boiler for inspection,
Steam traps, boiler mountings and accessories , Boiler Act.
4. Psychrometry:
Properties of Air-water vapors. Use of humidity chart , Equipment used for humidification, dehumidification
,Evaporative cooling, spray ponds, cooling towers .
5. Air:
Use of Compressed air, process air and instrument air, Process of getting instrument air.
Thermic fluid heater, Down therm heater , Temperature range , Principle, construction & working.(3-Hr)
XI. Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CML422
Department : Chemical Engineering
Course Credits :3
I. Course description:
This course mainly deals with basics of different optimization techniques and its application for various
engineering purpose.
II. Pre-requisites: Numerical methods, Basic Math’s
III. Textbooks:
1) Edgar, T.F., D.M. Himmelblau, and L.S. Lasdon, Optimization of Chemical Processes, 2nd Edition,
McGraw-Hill International Edition, Singapore, 2001.
2) Rao, S.S., Engineering Optimization Theory and Practice, 4 th Edition, A Wiley Inetrscience
Publication, Canada, 2009.
3) Reklaitis, G.V., A. Ravindran, and K.M. Ragsdell, Engineering Optimization: Methods and
Applications, 2nd Edition, John Wiley, New York, 2006.
4) Fletcher R., Practical method of optimization, 2nd Edition, John Wiley, New York, 2000.
5) Chong E.K.P. and Zal S. H., An Introduction to optimization, 2nd Edition, John Wiley, New York,
2001.
6) Nocedal J. and Wright S.J. Numerical Optimization, 2 nd Edition, Springer,2000.
7) G. Mitsuo and C. Runwei, Genetic Algorithms and Engineering Optimization, John Wiley, New
York, 2000.
IV. Objectives:
1) To understand the basics of optimization techniques, and problem formulation for optimization
2) To understand the single variable and multivariable optimization techniques and their application
3) To understand the linear programming application for optimization
4) To understand the advance optimization technique like genetic algorithm
V. Outcomes:
1) Student will understand necessary and sufficient condition for optimization and will be able to
formulate the optimization problem.
2) Student will be able to solve different optimization problem and their application to the case studies
like heat exchanger, evaporator etc
Numerical methods for optimizing a function of one variable, scanning and bracketing procedures, Newton’s,
Quasi-Newton’s and Secant methods of uni-dimensional search, region elimination methods, polynomial
approximation methods, how the one- dimensional search is applied in a multi-dimensional problem, evaluation
of uni-dimensional search methods.
Direct methods, random search, grid search, uni-variate search, simplex method, conjugate search directions,
Powell’s method, indirect methods- first order, gradient method, conjugate method, indirect method- second
order: Newton’s method forcing the Hessain matrix to be positive definite, movement in the search direction,
termination, summary of Newton’s method, relation between conjugate gradient methods and Quasi-Newton
method.
Basic concepts in linear programming, Degenerate LP’s – graphical solution, natural occurrence of linear
constraints, the simplex method of solving linear programming problems, standard LP form, obtaining a first
feasible solution, the revised simplex method, sensitivity analysis, duality in linear programming, the
Karmarkar algorithm, LP applications.
Optimization of Unit operations-1 recovery of waste heat, shell & tube heat exchangers, evaporator design,
liquid liquid extraction process, optimal design of staged distillation column.
Optimization of Unit operations-2 Optimal pipe diameter, optimal residence time for maximum yield in an ideal
isothermal batch reactor, chemostat, optimization of thermal cracker using liner programming.
Genetic Algorithms: (Qualitative treatment) Working principles, differences between GAs and traditional
methods, similarities between GAs and traditional methods, GAs for constrained optimization, other GA
operators, real coded GAs, Advanced Gas
CML 423
Department : Chemical Engineering
Course Credits :3
I. Course description:
A brief review of the basic principles and existing techniques of petroleum refinery such as exploration
of crude oil, characterization and fractionation into usable petroleum products. Recent advancements in
secondary processes on the above areas to meet the revised standard and specification of the petroleum
products. This course will end up with understanding of the fundamentals of refinery and present and
future requirements of the refinery/oil sector.
II. Pre-requisites:
CML 361, CML366
III. Textbooks:
1. Modern Petroleum Refining Processes, Bhaskara Rao B.K., Oxford & IBH Publishing Co. Pvt. Ltd.
New Delhi., Edition 3 rd
2. Petroleum Refining Engineering, Nelson W.L.., Tata McGraw Hill Publication Co. Ltd. (1985), 4th
Edition.
3. Petroleum Refining Technology and Economics, Gary J.H. & Handwerk G.E., Marcel Dekker, Inc.,
New York, 3 rd Edition
4. Petroleum Refining Manual, Noel H.M., Publisher Reinhdd Pub. Corp., New York.
5. Modern Petroleum Technology, Hobson G.D. & Rohl W., Applied Science Publication, 4th Edition.
IV. Objectives:
1. To develop the fundamentals of refining of petroleum crude oil and its fractionation in different useful
petroleum products.
2. The student will be aware to the product quality, related environmental concern and the standards by
applying the different primary, secondary and advanced refinery processes.
3. The student will be aware to problems and remedies in petroleum sector.
4. To develop the skill and knowledge for upgradation of petroleum refineries as per present and future
demand.
5. To develop the responsibility of technological inputs related to energy and environmental demand.
V. Outcomes:
At the end of the course, the student will understand the fundamentals and advances in refinery sector. Students
will gain detailed knowledge of exploration of crude oil, its fractionation into different useful petroleum
products, their quality, related environmental concerns and the standard by the recent and updated technology.
The students will be able to visualize the scenario of refinery in India and abroad and can work in refineries and
R&D sector of the related area.
a b c d e f g h i
1 √ √ √ √ √
2 √ √ √ √ √ √ √ √
3 √ √ √ √ √ √ √ √ √
4 √ √ √ √ √ √ √
5 √ √ √ √ √
CML424
Department : Chemical Engineering
Course Credits :3
I. Course description:
The core subject CML 425 Membrane Technology covers concept, design and application of various
membrane separation processes such as microfiltration, reverse osmosis, ultrafiltration, nanofiltration,
dialysis and electrodialysis, pervaporation, liquid membrane permeation, gas permeation
II. Pre-requisites:
Heat Transfer, Fluid Mechanics
III. Textbooks:
1. Geankoplis, Transport Processes And Separation Process principles, Prentice-Hall of India Private
Ltd , New Delhi.
2. Richardson J.F., Harker J.H., Chemical Engineering, Vol. II, Butterworth Heinemann, New
Delhi.2006.
3. Nath K., Membrane Separation Process, Prentice-Hall of India Private Ltd , New Delhi 2008
IV. Objectives:
1. To introduce the concept of various membrane separation processes such as microfiltration, reverse
osmosis, ultrafiltration, nanofiltration, dialysis and electrodialysis, pervaporation, liquid membrane
permeation, gas permeation
2. To design of various membrane separation processes such as microfiltration, reverse osmosis,
ultrafiltration, nanofiltration, dialysis and electrodialysis, pervaporation etc.
3. To introduce application of various membrane separation processes such as microfiltration, reverse
osmosis, ultrafiltration, nanofiltration etc.
V. Outcomes:
Students will gain fundamentals, design approach and its application for various membrane separation
processes such as microfiltration, reverse osmosis, ultrafiltration, nanofiltration, dialysis and
electrodialysis, pervaporation, liquid membrane permeation, gas permeation
Membrane characterization: Pore size and pore distribution; Bubble point test; Challenge test; Factors
affecting retentivity, concentration polarization, gel polarization, fouling, cleaning and regeneration of
membranes.
diffusion model; Viscous flow models; Models for separation of gas (vapour) mixtures;
Science and technology of microfiltration, reverse osmosis, ultrafiltration, nanofiltration, dialysis and
electrodialysis, pervaporation, liquid membrane permeation, gas permeation.
XI. Notice
Notice will be displayed on Notice Board near to Chamber.
Course Coordinator
CML425
Department : Chemical Engineering
Course Credits :3
I. Course description:
Basics on different types of polymers, structure-property relationship, different processing techniques for
polymers, their rheology, testing for various properties, management of polymer wastes and its recycling are
stressed in this course.
III. Textbooks:
1. Gruenwald G, Plastics - How Structure Determines Properties, Hanser Publishers, 1993
2. Baird D. G. and Collias D. I., Polymer Processing Principles and Design, Butterworth-Heinemann,
1995
3. Vishu Shah, Hand Book of Plastics Testing Technology, John Wiley & Sons Inc., New York, 2nd
edition, 1998.
4. J.S.Anand, K.Ramamurthy, K.Palanivelu, How to identify Plastics by Simple Methods, CIPET,
Chennai, 2 nd edition.
5. Anthony L. Andrady (Ed.), Plastics and the Environment, Wiley Interscience, New York.
IV. Objectives:
1. To understand the basics on polymers and methodologies to improve the properties of polymeric
materials.
2. Provide students with a basic understanding of polymer processing techniques and rheological
behavior.
3. Increase the student's ability to identify plastics by simple tests.
4. To understand standard testing methods for evaluation of different properties.
5. To enhance knowledge on importance of plastic waste management and recycling techniques.
V. Outcomes:
At the end of the course, the students would able to explain the polymer processing techniques and have
knowledge to opt a particular technique for production of specific products. The students will learn effective
ways of handling polymer wastes (without having any environment issues).
2. Processing:
Basics of process design, Classification & general aspects ofprocesses - molding& forming operations, Post die
processing; Decoration of plastics - Printing, Vacuum Metalizing, In-mold decoration.Additives &
Compounding - Different types of additives, Batch mixers, continuous mixers, Dispersive and distributive
mixing, Characterization of mixed state.
Fundamentals on Viscous & Viscoelastic behavior of polymer melt, Rheological measurements and Polymer
processability. Non isothermal aspects - Temperature effect on rheological properties, Crystallization,
Morphology & Orientation, plastic memory, Molecular weight effects on processing and properties.
Basic concepts of testing,National & International standards, Test specimen preparation, Pre conditioning &
Test atmosphere.
Identification of plastics by simple test - Visual examination, Density, Melting point, Solubility test, Flame test,
Chemical tests.
Effect of shape & structure on material properties, Long - term & short - term mechanical properties, crazing,
Permeability & barrier properties, Environmental-stress cracking, Melt flow index, Heat deflection temperature,
Vicat softening temperature, Glass transition temperature, thermal conductivity, Co-efficient of thermal
expansion, Shrinkage, Thermal stability, Flammability.
Plastics waste and the associated problems, Integrated waste management - source reduction, recycling &
sustainability correlation, energy recovering process. Environmental issues, policies and legislation in India.
XI. Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CML426
Department : Chemical Engineering
Course Credits :3
I. Course description:
A brief review of the existing separation technologies such as adsorption-based separation, membrane
separation, cryogenic separation, multi-component distillation, and biotechnology based separation.
Recent advancements on the above areas and new separation processes such supercritical extraction,
hybrid systems, reactive separation etc. will be covered. This course will terminate with several design
projects on real life problems.
IV. Objectives:
1. Continuous research and development activities across the world have enhanced the scope of chemical
engineering application in the field of separation technology. This course gives the basic overview of the
existing technologies such as adsorption, membrane separation, cryogenic separation and
biotechnological separation.
2. It also covers upcoming topics such as reactive distillation, supercritical fluid extraction etc.
3. Another interesting feature of this course is that it gives the students a perspective of the application of
these technologies via projects related to recent research topics.
V. Outcomes:
At the end of the course, the student will understand the advances in conventional and new separation
processes. The students will be able to apply these principles for the separation of various components by
considering their advantages and disadvantages for application and design.
Course Credits :1
I. Course description:
Lab experiments on various equipments / instruments related to separation process.
III. Textbooks:
1) Separation Process Principles, Seader J. D., Henley E. J., Wiley, 2001, 2nd Edition
2) Chemical Engineering Vol. 2, Richardson J. F., Harker J. H., Elsevier, 2002, 5th Edition.
3) Natural Extract using Supercritical CO2, Mukhopadhyay M., CRC Press, 2000, 1st Edition.
4) Membrane Separation Processes, Nath K., Prentice Hall of India, 2008, 1st Edition.
5) Bio-separations: Principles and Techniques, Sivasankar B., Prentice Hall of India, 2005, 1st Edition.
IV. Objectives:
1. To give the exposure of various equipments
2. Handing the instruments related to separation process.
3. Designing the experiments
V. Outcomes:
At the end of the course, the student will understand the basic concepts and operations of various lab
equipments / instruments related to separation process.
XI. Notice
Notice will be displayed on Notice Board near to Chamber and Chemical Engineering Notice Board.
Course Coordinator
CMP427
Department : Chemical Engineering
Course Credits :3
I. Course description:
The course covers the fundamentals of Computational Fluid Dynamics (CFD). The CFD techniques that can be
applied for solving practical problems in fluid flow / heat transfer is discussed. Illustration on application of CFD
in solving industrial problem is discussed.
III. Textbooks:
1. H. K. Versteeg and W. Malalasekera, An introduction to CFD, Longman Scientific and Technical, 1st edition,
1995.
2. S. V. Patankar,Numerical heat transfer and fluid flow, Mc Graw-Hill Book Company, 1 st Edition, 1980.
3. P. S. Ghoshdastidar, Computer simulation of flow and heat transfer, Tata McGraw-Hill Publishing, 1 st
edition, 1998.
4. K. Muralidhar and T. Sundararajan, Computational Fluid Flow and Heat Transfer, Narosa Publications, 2nd
Edition, 2003.
5. Anderson. J., Computational Fluid Dynamics: The Basics with Applications, Mc-Graw Hill, 1995.
IV. Objectives:
To introduce students to applied computational fluid dynamics (CFD) and to teach them how to solve a fluid
flow problem using different numerical techniques available for CFD.
V. Outcomes:
At the end of the course, the student will have understood the principles of computational fluid dynamics, the
various numerical techniques available and be in a position to intelligently use this CFD techniques for
simulation of practical problems in fluid flow / heat transfer.
Introduction
History, Comparison of the three basic approaches for engineering problems in solving by analytical,
experimental and computational methods, Beam advance in computational techniques, Softwares available for
CFD.
Problem Formulation
Formulation of problem, Physical and mathematical classification of problems, Types of governing differential
equations.
Discretisation
Truncation and Round-off error; Explicit and Implicit approaches; Basic of finite difference method, Finite
element method, Finite volume method and Spectral method, Treatment of boundary conditions.
Steady-state problems, One dimensional heat conduction transfer through a pin-fin, Two dimensional
conduction through a plate unsteady state problem, One dimensional transient heat conduction, Explicit and
implicit methods, Assessing accuracy and stability of numerical methods.
Types of fluid flow and their governing equation, Viscous incompressible flows calculation of flow field using
the stream function-vorticity method, Calculation of boundary layer over a flat plate, Numerical algorithm for
solving complete Navier-Stokes equation-MAC method SIMPLE algorithm, Introduction to standard - model
for turbulent incompressible flow, Project problem.
XI. Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CML428
Department : Chemical Engineering
Course Credits :3
I. Course description:
This course provides new technology and platform for students to learn and apply knowledge of
nanotechnology to develop new and improved quality product.
This enables students to learn concepts like CNT’s, Nanofluids, Polymer Nanocomposites, Synthesis
of various Nanomaterials and it’s applications in various fields as per their requirement
II. Pre-requisites:
No pre-requisites
III. Textbooks
IV. Objectives:
1. To give the exposure of various equipments
2. Handing the instruments related to separation process.
3. Designing the experiments
V. Outcomes:
Synthesis of various nanoparticles are performed and their themal property using analytical
equipments are done
VI. Expanded Course description:
Introduction to Nanotechnology,
Physical chemistry of solid surfaces: Electrostatic stabilization, steric stabilization
Synthesis of Nanomaterials: Matrix mediated growth technique, sol-gel method, Chemical precipitation
method etc,
Application in Chemical Technology: Polymer Nanocomposites-Synthesis, characterization, mechanical,
thermal properties etc
Application in Carbon nano tubes: Synthesis, characterization, SWNT,MWCNT, different models used for
CNT, method of synthesis-Arc discharge method, lasor ablation method, CVD method etc
Application in drug delivery,
Application in nanofluids: Synthesis of various kind of nanofluids, application in Thermal conductivity,
heat transfer coefficient, heat exchanger applications, study of dimensionless analogy, etc
Study of Characterization of nanoparticles techniques: XRD, TEM,SEM,AFM,DSC, TGA,DMA,
Rheometer etc
1 √ √ √ √ √
2 √ √ √ √ √
3 √ √
4 √ √ √ √
5 √ √
Course Objectives
Course Coordinator
CML 429
Department : Chemical Engineering
Course Credits :1
I. Course description:
Lab experiments on various equipments / instruments related to Nanocomposite materials
Pre-requisites:
Nanotechnolgy
II. Textbooks
III. Objectives:
1) To understand knowledge of new technology
2) To understand the knowledge of Engg/Technology along with science
3) To understand the synthesis rout of Nano particles
4) To understand the applications in various Engg/Tech towards development of new product
5) To understand the approach for modeling for synthesis rout
IV. Outcomes:
At the end of the course, the student will understand the basic concepts and operations of various lab
equipments / instruments related to separation process.
1 √ √ √ √ √
2 √ √ √ √ √
3 √ √
4 √ √ √ √
5 √ √
Course Objectives
X. Notice
Course Coordinator
CMP 429
Department : Chemical Engineering
Course Credits :3
I. Course description:
The course covers the fundamentals of mineral processing , aspects of sampling, particle characterization,
comminution and classification, physical processes of mineral concentration involving dense media and
gravity separation, magnetic and electrostatic separation and ore sorting techniques, Froth flotation
technique etc.
III. Textbooks:
1. Elements of Mineral Dressing Author Gaudin A.M.;, Publisher New York Edition2nd Edition
2. Mineral Processing Author Pryor E.J; Publisher Kluwar Academic Publishers Edition3rd Edition
3. Elements of Mineralogy Author Rutley F. Publisher Thomas Murray & Co., London
4. A Text Book of Ore Dressing, Author Robert H. & Locke, Richards C.E; Publisher McGraw Hill Co.
IV. Objectives:
1. The objective of this course is to understand the fundamentals of minerals processing
2. To give the basic principles of different unit operation used in mineral dressing
3. To identify various processes and equipment used in mineral processing.
V. Outcomes:
At the completion of the course students will be able to understand the different steps used for the processing of
various minerals.
1.Mineralogy:
Studies of important metallic and non metallic minerals, their characteristics, origin etc. application of non
metallic minerals. Sea as a source of minerals. Status of mineral beneficiation industry in India. Study of some
representative beneficiation practices with flow sheets. Sampling methodology and equipments.
2.Comminution:
Primary, secondary and special crushers and their performances. Cylindrical and cylindro-conical ball mills,
Rod mills, Tube / Pot mills and their performances, capacities, reduction ratios etc. Dry and Wet Grinding.
Open and closed circuit grinding. Work Index calculations. Interlocking and liberation of minerals.
3.Screening:
Sizing and Classification: Standard screening tests and graphical representations of the results.Particle size
distribution, Sorting, Sizingand Pneumatic classifiers and their performances.Thickeners, Hydrocyclones
etc.Theory and practice of sedimentation and filtration.Working of Rotary vacuum filters.
Principles of Jigging, Tabling and Heavy Media Separation. Processes with equipments used, important
controlling factors in operation and application.Beneficiation practice for arsenopyrite containing scheelite.
5.Froth Flotation:
Natural and Artificial Floatability of minerals. Frothers, Collectors, Depressants, Activators / Deactivators,
PH Modifiers, etc. Flotation machines.Study of representative sulphide and non sulphide minerals and non
metallic ores.Multistage flotation and Column Flotation.
Principles of Electrostatic and Magnetic Separation (Dry and Wet type). Separation units used in practices and
examples in the industries.Calculation of Recovery and ratio of concentration and Mass balance calculations
in ore dressing. Industrial set up of Ore Dressing plant.
XI. Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CML 430
Department : Chemical Engineering
Course Credits :1
Objective: Objective of this subject is to expose students to understand and perform the experiment related to
the basic environmental engineering and its application to chemical engineering
Syllabus:
1. David L; Weber W.J. Environmental Engineering Handbook, Physico-Chemical Processes for Water
Quality Control, Lewis Publishers.
2. Rao M.N. and Dutta A.K., Waste Water Treatment, Oxford & IBH Publishing Co. Pvt. Ltd.
3. Pandey G.N. and Camey G.C., Environmental Engineering,. Tata – McGraw Hill Book Co., New Delhi
(1989)
Sliptest –I 15 min 10
viva 10min 10
Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CMP431
Department : Chemical Engineering
Course Credits :1
Objective: Objective of this subject is to expose students to understand and perform the experiment related to
basic industrial waste treatment and its application to chemical engineering
Syllabus:
References:
Evaluation of students
Sliptest –I 15 min 10
viva 10min 10
Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CMP434
Department : Chemical Engineering
Course Credits :3
I. Course description:
Basics on different types of entrepreneurs, steps involved in setting up a business, tools for running a successful
business are stressed in this course.
III. Objectives:
Based on the topics discussed in the class, Student shall be able to prepare a business plan more
accurately and able to start up a business.
IV. Outcomes:
Motivation : Major motives influencing Entrepreneur- Achivement Motivation Training, Self Rating, Business
game, Thematic Apperception Test - Stress Management. Entrepreneurship Development Programs - Need,
objectives.
1. Khanka S.S, Entrepreneurial Development, S.Chand & Co. Ltd NewDelhi, 1999
2. Philip Kotler, Marketing Management, Prentice Hall of India, New Delhi
3. Rathore B.S. and Dr. Saini J. S , A Handbook of Entreprenuership, Aapga Publications, Panchkula
(Haryana).
4. EDII - Faculty & External experts - A Hand Book for new Entrepreneurs, Entrepreneurship
Development Institute of India, Ahmedabad, 1986.
X. Evaluation of students
Component Duration Weightage
Business Plan - 15
Seminar - 05
End Semester Exam 3 hours 40
XII. Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CML431
Department : Chemical Engineering
Course Credits :3
Objective: Objective of this subject is to expose students to understand the solving technique for basic transport
processes and its application to chemical engineering
Syllabus:
Integral laws for conservation of mass, momentum, angular momentum and energy; Constitutive laws,
Differential forms of mass conservation equation, Bernoullis equation; Navier-Stokes, Equations; Differential
form of Energy equation. Applications of integral and differential conservation equations. Shear stress, pressure
gradient relationship - laminar flow between parallel plates - Laminar flow through circular tubes (Hagen
poiseulle's) - Hydraulic and energy gradient - flow through pipes
Governing equations for Fluid flow systems; Solutions of linear and non-linear algebraic equations, Time
marching solutions; Discretization of derivatives-finite difference; Finite volume method
Applications of fluid dynamics in modeling flow through porous media and through capillaries, Modeling
Text Books :
1. S. V. Patankar, "Numerical Heat Transfer and Fluid Flow", Hemisphere Publishing Corporation, 1980.
2. D. A. Anderson, J. C. Tannehill and R. H. Pletcher, Computational Fluid Mechanics and Heat Transfer
3. K. Muralidhar, T. Sundararajan Computational Fluid Flow and Heat Transfer Narosa Publishing House
Second Edition
Class Schedule:
Three 55 minutes session per week.
Evaluation of students
Component Duration Weightage
Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CML 432
Department : Chemical Engineering
Course Credits :3
I. Course description:
Intensive coverage of management in a wide range of project applications from concept through operations.
Planning, scheduling, controlling, economic analysis, quality control and customer satisfaction are stressed in
this course".
III. Textbooks:
1. Mantel, Samuel, Meredith and others, Project Management: Core Text Book, Wiley India Pvt. Ltd., 1 st
Edition, 2006.
2. S. Choudhary, Project Management, McGraw Hill India.
IV. Objectives:
Provide students with a basic understanding of project management principles and practices.
Improve the student's ability to communicate effectively both orally and in writing.
V. Outcomes:
At the end of the course, the student will understand the project management principles. The students will be
able to communicate effectively both orally and in writing.
Project Management, Project Management vs General Management, Life cycles of projects, Project selection
methods, Case studies, Examples.
The contents of a project plan, Planning process, Work breakdown structure, Multidisciplinary teams, Case
studies.
Methods of budgeting, Cost Estimating, Improving cost estimates, Budget uncertainity and risk management,
Case studies.
PERT and CPM networks, Project uncertainity and risk management, Simulation, Gnatt chart, Extensions to
PERT and CPM, Case studies.
Expediting a project, Resource loading, Resource leveling, Allocating scarce resources to projects
XI. Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CML433
Department : Chemical Engineering
Course Credits :3
Objective: Objective of this subject is to expose students to understand basic different numerical technique and
its application to chemical engineering
Syllabus:
This course focuses on the use of modern computational and mathematical techniques in chemical engineering.
Starting from a discussion of linear systems as the basic computational unit in scientific computing, methods for
solving sets of nonlinear algebraic equations, ordinary differential equations, and differential-algebraic (DAE)
systems are presented.
Finite difference solution for the second order ordinary differential equations. Finite difference
solution for one dimensional heat equation (both implicit and explicit) use of computer for solving the
numerical.
References
1. Steven C. Chapra &Raymond P Canale, Numerical Methods for Engineers, 4 th Edition, Tata McGraw
Hill, New Delhi.
2. Santosh Gupta, Numerical Methods for Engineers, New Age Internationa Publishers.New Delhi
Class Schedule
Three 55 minutes session per week.
Evaluation of students
Component Duration Weightage
Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CML 434
Department : Chemical Engineering
Course Credits :3
Objective: Objective of this subject is to expose students to understand basic application of different software’s
and its application to chemical engineering
Syllabus:
Elements of digital computer architecture, computer logic, central processing unit, main memory, Input /
Output devices, operation systems – Software languages hierarchy, Assembly language and high level
languages - graphic software, language selection, programmed development. Physical properties evaluation,
Thermodynamic properties of gases and binary mixtures, methods of calculations, Vapor-liquid equilibrium
data for ideal and non-ideal mixtures. Bubble points and dew points, flash distillation calculation. Equipment
design. Development of software for the following systems: Heat exchange systems. Double pipe and shell &
tube exchangers – Pumps, pipings and pressure drop calculations. Equipment design like evaporator, single
and multiple effects, Distillation systems, crystallizer, Absorber and stripper – Liquid – Liquid
extraction. Process dynamic simulation - Distillation column, Reactors, Absorbers, evaporators and
crystallizers. Introduction to simulation packages like GPSS, CSMP.
References:
1. Afgan N.H. and Schlunder, C.V. Heat Exchangers-design and theory , Scripta Book, Washington, 1974.
2. Bhattacharya and Narayanan, Computer aided design of Chemical Process equipments , New Central Book
Agency,
Calcutta (1992)
3. Crowe C.M. et. al., Chemical plant simulation-An Introduction to Computer aide steady-state process
analysi, Prentice
Hall, 1971
4. Franks R.G.E., Modeling and simulation in Chemical Engineering, Wiley Inter Science, 1972.
5. Groover M.P., Timmers E.W., Computer Aided Design and Manufacturing, Prentice Hall of India Pvt. Ltd.,
New Delhi, 1985
6. Henley E.J., and Rusen F.M., Material and Energy Balance Computations, John Wiley, New York, 1969.
7. Holland C.D., Fundamentals and modeling of simulation process, Prentice Hall (1975).
8. Leeshey M.E, Computer aided process plant design, Gulf Publishing Co.
9. Myers, A.L. and Seeden, W.D., Introduction to Chemical Engineering and Computer Calculations, Prentice
Hall, 1976.
10. Nashelsky L., Introduction to Digital Technology, John Wiley and Sons, New York, 1983.
11. Prausnitz, S., Computer calculations in Multi Component vapor liquid equilibria Prentice Hall, 1980.
12. Smith B.D., Design of Equilibrium Stage Processes, McGraw Hill Book Co. New York.
Class Schedule
Three 55 minutes session per week.
Evaluation of students
Component Duration Weightage
Notice
Notice will be displayed on Chemical Engineering Notice Board.
Course Coordinator
CML 435
Some more electives currently not in operation but can be kept for future requirement
Course Credits :3
Objective: Objective of this subject is to expose students to understand basic paper and pulp technology and its
application to chemical engineering
Syllabus:
Introduction, raw materials for paper making, structure, physical, chemical properties, morphology, reaction of
cellulose with different chemicals
Aqueous pulping systems, commercial pulping process, variables associated with raw materials and pulping
process, optimization of process parameters, materials and energy balance calculations
Pulp washing, screening, recovery of spent chemicals involving multiple effect evaporators, cascade
evaporators, incineration, recaustising and calcinations
Pulp bleaching and stock preparation, internal sizing, filling and loading, colouring, wet end strength additives,
surface sizing.
Sheet forming process, Fourdnui and cylinder mould machine, drainage characteristics, water marking, head
box, slice, wire, couch, pressing of sheet for water removal.
Paper drying, drying characteristics, heat and mass transfer aspects, ventilation, dryer performance calculations,
air-drying, radiant drying
REFERENCES
1. Pulp and Paper: Chemistry and Chemical Technology Vol I to IV, Casey J P, Ed., Wiley Interscience, New
York,
2. MacDonald R G, Pulp and Paper Manufacture Vol I to III, 2 nd Ed., McGraw Hill, New York.
3.Britt K W, Handbook of Pulp and Paper Technology, Reinhold Publishing Corporation, New York.
Mark, Handbook of Physical and Mechanical testing of Paper and Board, Vol.I & II, Dekker Publication
Department : Chemical Engineering
Course Credits :3
Objective: Objective of this subject is to expose students to understand basic chemical informatics and its
application to chemical engineering
Syllabus:
Representation of molecules and Chemical Reactions: Nomenclature; Different types of notations; SMILES
coding; Matrix Representations; Structure of Molfilles and Sdfiles; Libraries and tookits; Different electronics
effects; reaction classification.
Representing 2D and 3D structures I. Kinds of 2D structures representation; atom lookup and connection
tables; graph theory; SMILES; SD files; representation nuances; descriptors.
Database Design and their Management: Database concepts. Structured Query language. Design of Chemical
databases, Data Abstraction; Data Models; Instances and Schemes; E-R Model – Entity and entity sets;
Relations and relationship sets; E-R diagrams, Reducing E-R Diagram to tables, Network Data Model: Basic
concepts, Hierarchical data Model: Basic concepts, Metadatabases, Indexing and Hashing, Text Databases,
Introduction to Distributed Database Processing, Data Security. Intefacing programs with databases.
Calculation of physical and chemical data, molecular mechanics, Descriptors for chemical compounds,
Methods for data analysis, Artificial intelligence systems in Chemical Engineering, Chemical Markup Language
(CML).
Prediction of physical and chemical properties, Structure– Spectra correlations, Chemical reactions and
synthesis design, Drug design, elements of bioinformatics and genomics.
Introduction to computational fluid mechanics, Applications of CFD in modeling flow through porous media
and through capillaries, Modeling flow through the human circulatory systems, Drug delivery.
Text Books
3. Stuart Schreiber, Tarun M. Kapoor, , Chemical Biology: From Small Molecules to Systems Biology and Drug
Course Credits :3
Objective: Objective of this subject is to expose students to understand basic technology related to paint,
pigment, powder coating and its application to chemical engineering
Syllabus:
Historic development of paint industry, paint components and their roles, classification of paints, organic file
formers, chemistry of film formers, water thinabble coatings. Drying and semidrying oils like linseed, tung,
castor, soyabean oil, their occurrence, compositions and properties. Drying index and its significance,
Modification of oils for surface coatings like malenised, styrenated and vinylated oils.
Classification of resins, natural resins like rosin, shellac, cashew nut shell liquid and synthetic resins like
phenolics, epoxy, polyester, polyurethane & acrylic resin.
Paint machineries like ball mill, attritor, dynomill, triple roll mill, edge runner, sand mill, working mechanism
and selection of machinery for a particular end use.
Principles of formulations of various types of paints like primer, synthetic enamels, wall finishes, wood
finishes, computerized colour matching system, testing and analysis of paints, paint film defects and their
remedies.
Industrial paints like stoving paints, acrylic paints, bicycle paint, marine paints, acid & alkali resisting paints,
automotive paints, method of applications, powder coating, compositions, applications and comparison with
normal liquid paints.
Pigment classification, properties, industrial pigments like Titanium dioxide, zinc sulphide lithophone, chrome
pigments, red oxide pigment, black pigment, organic pigment, tonners and speciality pigment.
References:
4. R Lambourene, Ellis Horwoor Ltd, Paint and Surface Coating, John Wilet & Sons, New York, 1987.
Department : Chemical Engineering
Course Credits :3
Objective: Objective of this subject is to expose students to understand basic surface coating industries and its
application to chemical engineering
Syllabus:
Preparation of Pigments: White Pigments. Red pigments; orange and yellow pigments; green, blue and black
pigments.
Drying Oils and Driers; Solvents and Plasticisers: Resins, gums; waxes and bitumens, varnishes and lacquers;
paints and enamels; cellulose ester products;synthetic resins and finishers; paint chemistry.
Paints plant; varnish plant; manufacture operation; factory cost accounting; research, development and control;
fire protection; safety and health.
References
1. Tracton A. A., Coatings Materials and Surface Coatings, CRC Press, 2007
2. Bieleman J., Additives for Coatings, John Wiley & Sons, 2008
3. Schweitzer P. A., P.E., Paint and Coatings, CRC Press, 2005
Department : Chemical Engineering
Course Credits :3
Objective: Objective of this subject is to expose students to understand basic aspect of corrosion theory and its
application to chemical engineering
Syllabus:
Enabling theory for corrosion, thermodynamics aspectrs of corrosion reactions, anerset equation. Basic wet
corrosion cell, electrode potential, potential- ph diagram, kinetics of corrosion reactions, Butler-Volmer
equation, polarization, mixed potential theory, passivity, immunity.
Uniform corrosion, galvanic corrosion, pitting, dealloying, crevice corrosion, intergranular corrosion, filiform
corrosion, impingement attack, cavitations, fretting corrosion cracking process.
Corrosion measurements:
Methods of measurement s of corrosion based kn study of various ASTM standards for corrosion – Weight ,
electrochemical, electrical, thickness.
Principles of different methods of corrosion protection and surface treatment, chemical and clectrochemical
surface treatments if metals.
Protective coatings like plating, pvd, cvd,thermal spray, hot dip, applicastion of inhi9bitors, and electrochemical
methods for corrosion protection.
Other Corrosion Environment and Materials Selection: selection of corrosion resistant materials for use in acids,
alkalies, atmosphere, soils, seawater, freshwater, etc.
References
1. Butlar G. and Ison' HC. K ",'Corrosion and its Prevention in Waters, Leonard Hill- London (1966).
2. Rajgopalan, K.S. ", Corrosion and its Prevention , Chemical Engineering Education Development Centre,
I.IT. Madras (1975).
3. Uhlig H. H, Corrosion and Corrosion control., John Wiley and sons (1971).
Department : Chemical Engineering
Course Credits :3
Objective: Objective of this subject is to expose students to understand advance separation technique for
separation and its application to chemical engineering
Syllabus:
Separation by phase addition or creation: approximate methods for multicomponent, multistage separations
(Fenske-Underwood-Gilliland method, Kremser group method).
Equilibrium-based methods for multicomponent absorption, stripping, distillation, and extraction: Equation-
Tearing procedures-Tridiagonal Matrix Algorithm, Bubble-Point (BP) method for distillation, Sum-Rates
method for absorption and stripping. Isothermal Sum-Rates method for liquid- Liquid extraction.
Enhanced distillation and supercritical extraction: Reactive distillation process in kinetics, dissociation
extraction, reactive extraction technology.
Separation by barriers and solid agents: membrane separations, adsorption, and chromatograph (Transport in
membranes, sorbents, equilibrium considerations, kinetic and transport consideration, sorption systems).
References
1. J.D. Seader and E.J.Henley, Separation Process Principles, Wiley, 2 nd Edition 2004
2. Geankoplis, Transport Processes And Separation Process principles, Prentice-Hall of India Private Ltd , New
Delhi, 4 th Edition 2006
Department : Chemical Engineering
Objective: Objective of this subject is to expose students to understand basic piping engineering and its
application to chemical engineering
Syllabus:
Pipe Routing & Drafting: Piping Symbols, Flow Diagrams, Piping Isometrics, General Arrangement Drawings
Sections and Elevation, Detail Drawings, Plot Plans, 3D Representations. Piping System Components: Piping
Layout, Piping Fittings - elbows, tees, reducers, end caps, Stub Ins, Flanges, Gaskets, Selection & Application
of Valves, Pipe Racks, Pipe Supports, Anchors, & Guides, Thermal Insulation. Valves, Flanges & Gaskets
Special piping components: Construction working and selection of various components such as steam traps,
strainers, sight glass, level gage, expansion bellows, flame arresters, inline mixers and static mixtures.
Valves and other piping components: Functions of valves and their selection, valve materials and, material of
construction for the following type: Gate, globe, Needle, piston, Butterflies, plug. Diaphragm, pinch, foot and
float valves, Application of various valves and their operational characteristics relevant to piping engineering.
Process equipment : Reactors, Towers, Exchangers, Pressure Vessels, Drums, Furnaces, Process Liquid
Storage Tanks, Mechanical equipment - Pumps, Compressors, Turbines Process & Instrumentation Diagrams
(P&ID s) / Process Flow Diagrams: Purpose of P& ID s, Stages of Development of P & ID s, Symbolism &
Conventions, Process & Instrument Drawings, Process Equipment Relationships, Process Industry
Practices.Codes, Specifications, Abbreviations, Piping Abbreviations, Specification ClassesEquipment Layout.
Pipe Wall Thickness Calculations, Maximum Allowable Operating Pressure (MAOP), Design Conditions,
Design Pressure, Design Temperature.
Selection of various piping materials such as Ferrous, non-ferrous and non-metallic,
Piping fabrication, Precautions, Welder’s qualification, Preparations of pipe edges.
Designation of coated electrodes, Requirements of weld tests, Hot bending and cold bending operations,
Fabrication specifications.
Standard Piping Details: Underground Piping Systems, Pipe Rack Spacing, Pipe Flexibility, Heat Expansion,
Anchors, Shoes, Guides, Field Supports, Dummy Supports, Hanger Rods, Spring Hangers.
References
1. Deutsch D. J., Process piping systems, Chemical engineering magazine. Mc - Graw hill.
2. Littleton C.T., Industrial piping, Mc-Graw hill
3. McAllister E.W.. Pipeline Rules of Thumb Handbook, Gulf Publication, 1979
4. Mcketta J. J., Piping Design Handbook, Gulf Publications, 1992.
5. Rase H. F., Piping design for process plants, John Wiley
6. Watters G.Z., Analysis and Control of Unsteady Flow in Pipelines, Butterworth, 1986.
Department : Chemical Engineering
Course Credits :3
Objective: Objective of this subject is to expose students to understand basic energy management and its
application to chemical engineering
Syllabus:
Energy auditing: Methodology, analysis of past data, measurements of various parameters, portable and on
line instruments.
Steam Systems: Boiler-efficiency testing, excess air control, Steam distribution and use, steam traps,
condensate recovery, flash steam utilization.
Electrical systems: Demand control, power factor correction, load scheduling/shifting. Motor drives – motor
efficiency testing, energy efficient motors, and motor speed control.
Lighting: Conservation in Pumps, Fans (flow control), Compressed Air Systems, Refrigeration and
conditioning systems, Waste heat recovery, heat pipes.
REFERENCES
1. Murphy W.R., McKay G.A, Energy Management, Murphy Butterworth-Heinemann Ltd., 2001.
2. Turner W.C, Energy Management Handbook –, Fairmont Press, Lilburn, Georgia, 1993.
Department : Chemical Engineering
Course Credits :3
Objective: Objective of this subject is to expose students to understand basic reactor analysis and its application
to chemical engineering
Syllabus:
3. Chemical Reactor Analysis, G. F. Froment and K. B. Bischoff, John Wiley & Sons, Singapore, 1990 2nd
Edition.
4. Chemical Engineering Kinetics, Smith J. M., McGraw Hill, N Y, 1981, 3rd Edition.
5. Doraiswamy, L.K. and Sharma, M.M., Heterogeneous ReactionsVol. I and II, Wiley, 1984
Department : Chemical Engineering
Course Credits :3
Objective: Objective of this subject is to expose students to understand basic process intesification and its
application to chemical engineering
Syllabus:
Course Credits :3
Objective: Objective of this subject is to expose students to understand basic of reliability in chemical process
plant and its application to chemical engineering
Syllabus:
Introduction to probability: review of sets, events, definitions, finite sample spaces and enumeration,
conditional probability, partitions theorem, total probability theorem, Bayes’ theorem
Reliability Engineering Introduction: concept, terms, definitions, applications, history
Failure distribution: Reliability function, MTF, HRF, bathtub curve, conditional reliability
Constant failure rate model: exponential function, failure modes, applications, two-parameter exponential
distribution, Poisson process
Time dependent failure models: Weibull distribution, normal distribution, lognormal distribution
Reliability of systems: serial, parallel configuration, SSF, minimal cuts, minimal paths, common-mode failures,
three state devices
State dependent systems: Markov analysis, load sharing systems, standby systems, degraded systems, three state
devices
Physical reliability models: covariate, static, dynamic models, physics of failure models
Design for reliability: specification and system measurements, reliability allocation, design methods, failure
analysis, system safety and fault tree analysis
Maintainability: analysis of downtime, repair time distribution, stochastic point processes, system repair time,
reliability under preventive maintenance
Availability: concepts and definitions, models, system availability, design analysis
Data collection and empirical methods identifying failure and repair distribution
REFERENCES
1. Hines W. W., Montgomery D. C., Goldsman D. M., Borror C. M., Probability and Statistics in Engineering,
John Wiley and Sons (Asia) Pte Ltd., Singapore.
2. Ebeling C. E. Introduction to Reliability and Maintainability Engineering, Tata McGraw-Hill, New York
Department : Chemical Engineering
Course Credits :1
Objective: Objective of this subject is to expose students to understand and draw basic symbol representation
for different accessory in chemical process plant and its application to chemical engineering
Syllabus:
ISI Conventions.(ISI No. 696 – 1960) Covering the standard practice in Machine Drawing and also use of
I.S.I. specifications for limits & fits (ISI No. 919 – 1960).
Preparation of free hand proportionate dimensioned sketches & conventions of various elements such as
screw threads, fastener (nuts, bolts, studs, locking arrangement, foundation bolts etc.) Rivets and riveted joins,
welded joints.
Exercises in converting pictorial & isometric views into orthographic projection, sectioned views. Preparation
of details & assembly drawings of simple machine parts such as keys, cotters, pin, pulleys, cottered joints &
knuckle joints Bearing, shaft couplings. Various flanges & pipe connections. A valve, cocks, traps. Fixed and
flexible joints, Expansion joints.
Minimum 10-12 Imperial size sheets (A-1) covering the above syllabus should be drawn out of which 1/3 rd
should be drawn using computer software likes AutoCAD
REFERENCES
1. Bhatt N.D.; Elementary Engineering Drawing, Charotar Publishing House.
2. Mathur M.L. and Vaishwanar R.S.; Engineering Drawing and Graphics, Jain Brothers, New Delhi – 1993.
3. Narayana K.L. and Kannaiah P, Engineering Graphics, Tata McGraw Hill Co. Ltd., 2000.
4. Neumann W. M. and Sproul R.F, Principles of Computer Graphic, McGraw Hill 1989.
Department : Chemical Engineering
Course Credits :1
Objective: Objective of this subject is to expose students to understand basic computer programming and its
application to chemical engineering
Syllabus:
Computer Architecture: ALU, CPU, I/O devices, system softwares, operating systems, compilers, multiuser
environments.
Computer programming and numerical methods, computer-programming languages, C & C++ programs for
matrix operations, programs for estimating roots of polynomials.
Programs for numerical integration, Trapezoidal and simphsons rules, regression analysis, programs for
solution of ordinary differential equations, programs for interpolation and extrapolations.
TEXT BOKS
2. Saran S., Swami P.K, Singh, K.K. Shah I.M. and Lal D.;, Computer Programming and Numerical Methods,
Metropolitan Book Corp. Ltd., New Delhi
3. Syal I.C. and Gupta S.P, Computer Programming and Engineering Analysis, A.H. Wheeler Co.
Department : Chemical Engineering
Course Credits :3
Objective: Objective of this subject is to expose students to understand basic numerical and statistical methods
and its application to chemical engineering
Syllabus:
Approximations and errors in computation and their evaluation, rounding – off and truncation; absolute,
relative and percentage errors. Solution of non-linear algebraic and transcendental equations, Bisection, false
position, Newton–Raphson, Iterative methods and generalized Newton’s method for multiple roots.
Newton – Raphson, Iterative, false-position and bisection methods; generalized Newton’s for multiple roots.
Solutions of linear simultaneous equations by Gauss elimination, Gauss-Jordan, Crout’s triangularization,
Jacobi and Gauss-Seidel methods, Cubic spline and Gaussian quadrature formula.
Numerical solutions of ODE by Taylor series, Euler’s modified method, Runge-Kutta method, Milne’s
method and their applications. Approximation of derivative (Ordinary & Partial), Boundary value problems
by finite difference methods.
Random variable, distribution function of continuous and discrete random variables, mathematical
expectation, generating function, Moments, Skewness and Krtosis.
Tests of hypothesis and significance, tests involving normal distribution, t- distribution chi-square distribution
and F distribution.
Correlation and regression: simple and multiple correlation and applications related to Engg. Prblems.
References
1. Grewal B.S.;, Higher Engineering Mathematics, Khanna Publication – 2004
2. Gupta S.C. and Kapoor V.K.;, Fundamentals of Mathematical Statistics, Sultan Chand and Sons,
Educational Publisher, New Delhi.
3. Sastry S.S, , Introductory Methods of Numerical Analysis, Prentics – Hall of India Pvt. Ltd., New Delhi –
1995.