Application of Dijkstra'sAlgorithm in Wireless Communication System
Uploaded by
IJRASETPublicationsApplication of Dijkstra'sAlgorithm in Wireless Communication System
Uploaded by
IJRASETPublications8 IX September 2020
https://doi.org/10.22214/ijraset.2020.31662
International Journal for Research in Applied Science & Engineering Technology (IJRASET)
ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 7.429
Volume 8 Issue IX Sep 2020- Available at www.ijraset.com
Application of Dijkstra’s Algorithm in Wireless
Communication System
Dr. Gurusharan Kaur1, Dr. Namrata Tripathi2
1
Asst. Prof. (Dept. of Computer Science/ Mathematics), Career College, Bhopal (M.P)
2
Asst. Prof. (Department of Mathematics), Govt. PG. College, Rajgarh (M.P)
Abstract: This paper presents the implementation of Dijkstra’s algorithm to find the shortest path in real time especially in
wireless communication network. Wireless communication network consists a large number of sensor nodes (transmit and
receiving proto- col nodes) scattered in an environment to collect the protocol regarding the environment. Every sensor node has
a specific range to send the protocol to the destination so the protocol is sent by nodes through the use of routing algorithm
(shortest path algorithm). The suitable algorithm should be accurate operation, stability, simplicity, equity and optimality which
all characteristics are present in the Dijkstra’s algorithm.
The most important feature of these sensor networks is the presence of dynamic topo- logy and which leads the mobility of the
nodes. This mobility needs a routing capable of adapting to these changes. This makes the weak protocol to travel and hence
fading occurs. So using of Dikstra’s algorithm will solve the problem of fading in wireless communication system
Keywords: Fading, Dikstra’s algorithm, Protocol
I. INTRODUCTION
Today wireless communication systems ha- ve been affected by an continuously increa- sing customer expectations on wireless
wid- eband internet services and are continuously evolving improvement on technologies. Wireless communication system must
increase their ability to respond the quick challenges. So the new generation wireless systems (3G\4G) are being designed for this
purpose. The efficient characteristics of (3G\4G) is that it provides a high data rate transmission speed at data rate up to
348kbps\2mbps for 3G and for 4G it is 100mbps\1gbps. So designing the system for such a high data transmission has become a
research hotspot for wireless communication system where the multipath fading is an important factor. In recent years research is
going in the industry and academic to decrease the fading in wireless commun- ication system.
A wireless sensor network consists a large number of sensor nodes which are scattered in an environment to collect the protocol
concerning the environment. The main feature of such networks are they don’t have a fixed structures and are used without any
fixed stations or any wire connections to exchange protocol and so to manage the networks. Hence the nodes present in such type of
network works in cooperation with each other, to have this cooperation and coordination there must be strong communication
among which we send protocol [4]. Every sensor nodes has a specific sensory range and in order to send the protocol to its
destination needs to locate nebourring nodes and communicates with them so that the package should be guided to its destination
and protocol package are sent by nodes with the use of routing algorithms [3]. Hence in the routing process in sensor- type networks
hardware imposes restriction on the network [5].
The suitable routing algorithm must have the following characteristics; accurate operation, stability, simplicity, equity, and
optimality [2]. Since sensors contains limited processing capability and power, and hence the protocol obtained from the nodes is
transmitted to other node which is strange in this characteristics. This node function as the central node (SINK) [7] and hence
processes complete knowledge of the network to transmit this protocol , the nodes requires a lot of power and many solutions has
been offered to provide for this.
Take an example of LEACH protocol, which deals the clustering problem in networks, has an ability to aggregate data for reduce
the energy used by sensors, and it can facilitate the process of protocol from the sensor network and hence it is capable of forming
the suitable structure for expandable routing for doing this the nodes present in cluster their protocol to the other node titled the
cluster head, and this node aggregates the protocol and sends it to sink [6]. In this way the number of transmissions is reduced The
PEGASIS protocol like LEACH protocol also decreases the number of transmission through aggregation of the data. But the
difference in this protocol a chain of sensor nodes is formed in which every node can receive protocol and then send it to the
neighbor is closer to it [1].
©IJRASET: All Rights are Reserved 1054
International Journal for Research in Applied Science & Engineering Technology (IJRASET)
ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 7.429
Volume 8 Issue IX Sep 2020- Available at www.ijraset.com
II. BACKGROUND’S AND PROBLEMS IN WIRELESS COMMUNICATION SYSTEM
Wireless communication have undergone rapid development in the last ten years with much remarkable improvement in its
performance and now wireless communica- tion have become a part of our lives. However, when the first generation of wireless
communication system began to emerge to provide voice service in early 1980’s. Then it was considered as a luxury. The 1G called
analog mobile phone service (AMPS), first introduce the concept of cellular service with frequency division multiple access
(FDMA) technology. It exists and has low spectral efficiency and low power efficiency. Then in the early 1990‘s. The second
generation (2G) was developed with digital technologies and 2G provides basic voice service and short messaging service (SMS)
the majority of 2G deployed around the world and or global system for mobile communication system (GSM) Network and it is
based on time division multiple access (TDMA) technologies and supports with data rate 9.6kbps since in 1990’s 2G has evolved to
meet the need of rapidly increased demand for data service. Currently, wireless system is dev- eloped continuously but several
factors significantly affect the wireless market. One of them is that customer expectations have risen to demand high data rate
multimedia applications for example video applications.
The second one factor is the rapid develop- ment of multimedia technology and internet. 3G is a new standard that rise to challenge
these factor services in the 3G were broadened from regular telephone service to include high speed internet service and video
communication.
Now industry migrants 3G into 4G wireless system designers facing two significant technical challenges they are namely band
width limitations and effect of multipath fading .And this multipath fading is an inherit phenomenon in warless communica- tion
which occurs the transmitted single experiences reflection and scattering. The characteristics multipath fading signals is the rapid
fluctuation of the amplitude of the radio signal over a very short period of time or travel distance.
III. PROPOSED METHOD IN WIRELS CONICATION
In this paper we will perform routing in wireless communication network by the use of dijkstra’s algorithm which will solve the
major problems of fading in wireless communication system. In wireless commu- nication when we transmit a information package
we need to reach it another node in shortest possible time in order to decrease the fading because fading will be major if the whole
work of transmitted protocol should not reach its destination in real time .so to cover and identify the shortest path in wireless
communication system plays a major role which came be better by using the dijkstra algorithm for searching shortest distance in
shortest possible time
IV. DIJKSTRA’S ALGORITHM
We will show how we can employment the Dijktra’s algorithm in wireless communication to find the shortest path in real time and
reduce the fading which is major problem in wireless communication system Given a weighted graph where V is the set of
vertices and E is the weighted edges, and the shortest path problem is to find a minimum a- weighted path between two nodes
(identify the source node by S and the destination node by D ) in the given graph below .the execution of the Dijkstra’s algorithm
on a weighted graph starts at the source node S results in a shortest path tree rooted as S. In other words we can say that Dijktra’s
algorithm will actually return the minimum weighted paths from the sources node to the other entire vertex in the weighted graphs.
The algorithm is discussed in below.
Begin: Algorithm Dijkstra–shortest path
1) For vertex v ε V
2) Weight[V] ∞ || an estimate of the minimum weight path (shortest path) from S to V
3) End for
4) Weight [S] 0
5) S Φ || Set of nodes for which we know the minimum- weight path from S
6) QV || Set of nodes for which we know estimate the minimum- weight path from S.
7) While Q ≠ Φ
8) U Extret –Min (Q)
9) S SU{u}
10) For each vertex V sucess that
(u,v) ε E.
11) If weight[v] > weight[u] + weight (u,v) then
©IJRASET: All Rights are Reserved 1055
International Journal for Research in Applied Science & Engineering Technology (IJRASET)
ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 7.429
Volume 8 Issue IX Sep 2020- Available at www.ijraset.com
12) Predecessor(v) u
13) End if
14) End for
15) End while
16) End Dijkstra’s shortest path
Dijktra’s algorithm proceeds in iterations and began with the weights of the minimum – weight path ( shortest distance) from the
source vertex to every other vertex is assumed to be + (as estimated valueindicates that path are not actually known ) and from the
source vertex it itself is assumed to be 0 during each iteration , we find the shortest path from the source vertex
(s) to a particular vertex u, which will be the vertex with the minimum weight among the vertex with the minimum weight among
the vertex that have been not yet obtained . we then explore the neighbors of u and then determine whether we can reach any of the
neighbor vertex say v from s through u on a path with weight be less than estimated weight of the current path we know from s to v,
if we could find such a neighbor of v we then set the predecessor of v to be the vertex u on the shortest path from s to . This step is
said to be relaxation step and is repeated over all iteration. The darkened edges shown in the working example in figures below. The
run time complexity of the Dijksta’s shortest path algorithm is
Example to illustrate the Working of Dijkstra’s Algorithm
This is the quick identification of shortest path algorithm in the real time when so many paths are available. So if we use this
algorithm in the wireless communication system we can make our communication so strong without any fading
©IJRASET: All Rights are Reserved 1056
International Journal for Research in Applied Science & Engineering Technology (IJRASET)
ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 7.429
Volume 8 Issue IX Sep 2020- Available at www.ijraset.com
V. CONCLUSION
The high- level contribution of this paper is the ideas of using Dijktra’s algorithm in the wireless communication system so that we
can decrease the fading the wireless communication system and transmit protocol in the shortest possible time and also covering the
shortest distance to the destination because in the most cases we cannot find the best route if we consider only one of these two
parameters because there is this possibility that the node which is at the shortest distance from the destination may not have
sufficient power to transmit the protocol due to this reason the protocol is not received properly and we face the problem of fading.
So if we use the Dijktra’s algorithm in this wireless system
REFRENCES
[1] Chow-Sing L, Chia-Nan H, Rong- jyue F (2008). “A Power- efficient data gathering scheme on grid sensor networks “proceedings of the 8th WSEAS
international conference o multimedia systems and signal processing. pp. 142- 147.
[2] Ghadimi A (2008). “Review how extraction in wireless sensor network” Tehran university, jan, pp. 125- 130.
[3] Kalantari S, Besheli M.A, Daliri Z.S, Shamshirband S, Ng L.S, Routing in wireless sensor network based on soft computing techniques. Scientific research and
essay 6(21), 4432-4441: 2011.
[4] Mauri k, Marko H, Timo DH (2005). ‘A survey of Application Distribution in Wireless Sensor Network’, EURASIP J.Wireless Commun. Networking, pp.774-
788
[5] Meghanathan N. Graph theory algorithms for mobile Ad Hoc networks. Informatica 36, 185-200, 2012.
[6] Rabiner HW, Chandrakasan A, Balakrishnan H (2000). “Energy- Efficient Communication Protocol for Wireless Microsensor Networks, “proceedings of the
33rd international conference on system sciences (HICSS’00),.
[7] Stefano B, Alessio C, Emanel M (2008). “Controlled Sink mobility for prolonging wireless sensor network lifetime “journal wireless network, springer
netherland, 14:6.
