Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 292 views

    Ubsurface Lickline Ools S S T

    Uploaded by

    breynner

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ubsurface Lickline Ools S S T

    Uploaded by

    breynner
    292 views2 pages

    Original Title

    Tool String

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    292 views2 pages

    Ubsurface Lickline Ools S S T

    Uploaded by

    breynner

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    HALLIBURTON

    SUBSURFACE SLICKLINE TOOLS


    SLICKLINE SERVICE TOOLS
    The famous Otis®-designed and manufactured slickline
    service tools have been the benchmark for the industry Wireline Socket
    and are a requirement for all tool boxes worldwide.
    Known for dependable performance and low mainte-
    nance costs, these service tools can help reduce your total
    operating costs. As the OEM (original equipment manu-
    facturer), Halliburton continues to provide high-quality
    slickline service tools.

    SLICKLINE TOOL STRING Stem

    A wireline tool string attached to a wireline is used to


    furnish the mechanical force necessary for setting,
    pulling, or servicing subsurface equipment under
    pressure without killing the well. Tool strings are avail-
    able in various ODs and component lengths designed to
    be compatible with various tubing sizes.

    Otis Rope Sockets provide a means for connecting the

    CN03560
    wireline to the tool string. The wireline is tied around a
    disc or dart in the socket to achieve a firm connection.

    Otis Stems are used as weight to overcome stuffing- Otis®


    box packing friction and well pressure on the cross- Rope Socket
    sectional area of the wireline. The stem can also
    transmit force either upward or downward to set or
    retrieve subsurface controls. Size and weight of the
    stem are determined by the impact force required and
    the size of the subsurface control to be run or pulled.
    For normal conditions, five feet of 1 ½-in. OD stem is
    made up by combining 2, 3, or 5 ft (0.61, 0.91, 1.22 m)
    lengths of standard stem. For high-pressure applica-
    tions when additional weight is needed, lead or Jars
    mallory-filled stems are available.

    Ordering Information
    Rope Socket
    Specify: nominal size, wire size, type (knot, no-knot).
    Part number prefix: 43BO

    Stem
    Specify: nominal size; length: 2, 3, 4 ft (.61, .91, 1.22 m);
    solid or filled (Y/N–lead, mallory).
    Knuckle Joint
    Part number prefixes: 44B—solid stem, 44AO—filled stem
    CN03559

    Running or
    CN03561

    Pulling Tool

    Typical String of Wireline Tools Otis® Stem

    3-28 SUBSURFACE FLOW CONTROLS


    HALLIBURTON

    Otis® Accelerators are used with and just above


    hydraulic jars for shallow, weighty jarring. Accelerators
    help maintain constant pull as the hydraulic jars begin
    to open. The accelerator inhibits pulling the wireline
    out of the wireline socket at these shallow depths.

    Otis Knuckle Joints have a special ball and socket


    design allowing angular movement between the jars
    and the running or pulling tool to help align them with
    the tubing. Knuckle joints are important if the tubing is
    corkscrewed and when wireline work is done in a
    directional hole. In these conditions, joints are used at
    every connection in the tool string. Where stem and jars
    will not align or move freely, tool operation may be
    impossible; however, the knuckle joint inhibits the
    wireline tools from hanging up.

    Otis Jars are available in mechanical and hydraulic


    types. With a set of mechanical jars below the stem, the

    CN03562

    CN03563
    weight of the jars and stem can be used to jar-up or
    down by pulling and releasing the wireline. A
    Halliburton Wireline Specialist can easily feel the jars
    Otis® Otis®
    and manipulate the wireline. Hydraulic jars are de-
    Knuckle Joint Blind Box
    signed to provide jarring action in wells in which it is
    difficult to obtain good jarring action with mechanical
    jars. Hydraulic jars, which allow an upward impact
    only, are usually run just above the regular mechanical
    jars. They require careful maintenance for maximum
    use in the tool string. Jar operation is monitored by a
    weight indicator.

    Otis B Blind Box serves as the impact point when


    downward jarring operations are required.
    Standard Wireline Tool String
    Normal Tool OD Fishneck OD
    Thread Connection*
    in. mm in. mm
    3/4 19.05 5/8 in. - 11 UNC 0.750 19.05
    1 25.40 5/8 in. -11 UNC 1.000 25.40
    1 1/4 31.75 15/16 in. - 10 UNS 1.188 30.18
    1 1/2 38.10 15/16 in. - 10 UNS 1.375 34.93
    1 7/8 47.63 1 1/16 in. - 10 UNS 1.750 44.45
    2 50.80 1 1/16 in. - 10 UNS 1.750 44.45
    2 1/2 63.50 1 1/16 in. - 10 UNS 2.313 58.75
    *Other thread connections available
    CN03564

    CN03566
    CN03565

    Ordering Information
    Specify: nominal size.
    Part number prefix: 45BO—knuckle joint

    Ordering Information Otis® Otis® Otis®


    Specify: nominal size, stroke: 20-in. or 30-in. (50.8 - 76.2 cm) –mechanical only. Mechanical Jar Hydraulic Jar Accelerator
    Part number prefixes: 44AO—mechanical jars, 44HO—hydraulic jars,
    44BA—knuckle jars, 44AC—accelerator

    Ordering Information
    Specify: nominal size and thread, maximum OD, tubing size and weight.
    Part number prefix: 44B—blind box

    SUBSURFACE FLOW CONTROLS 3-29

    You might also like