Professional Documents
Culture Documents
Professional Experience Over 4.8 Years
Professional Experience Over 4.8 Years
From To Company / Project / Position / Relevant technical, design and management experience
Company: Aeronautical Development Agency (ADA)
Position held: Design Engineer
Responsibilities:
1. Generating 3D Models, Assembly and Drafting for LRUs of TEJAS Fighter Aircraft by
using the software of Unigraphics (UG NX).
2. Proficient in managing design engineering operations involving design & development
of LRUs, developing detailed drawing for fabrication with coordination with internal
departments.
3. Efficient knowledge in preparing Bill of Materials (BOM) and Assembly process sheet
and detail part process sheet and GD&T.
Apr 2018 Till date 4. Performed Failure FMEA analysis and Constructing the Fault trees (FTA) to understand
the single point failures.
5. Experience in performing the RBD calculation by using WQS Relex tool.
6. Knowledge on Reliability standards MIL 217, MIL 1629 A and NSWC.
7. Experience in handling the NPRD Library while performing the Reliability prediction.
8. Verification and validation of the Project reports.
9. Performed DFMEA to explore the possibility of product malfunctions, reduced product
life, and safety and regulatory concerns
10. Technical Support and Management for outstation trails of Tejas Fighter/Navy
Aircraft.
11. Developing Aircraft Illustrated Parts Catalogue (AIPC).
From To Company / Project / Position / Relevant technical, design and management experience
Company: Defence Bio-Engineering Electromedical Laboratory (DEBEL)
Position held: Mechanical Design Engineer
Responsibilities:
1. Generating 3D Models, Assembly and Drafting for On Board Oxygen Generating
System (OBOGS) and Oxygen Sensor (OS) using UG NX and AutoCAD.
2. Preparation of Assembly Process Sheets and detail Part Process Sheets.
Mar 3. Successfully conducted the testing of Onboard Oxygen Generating System (OBOGS),
Nov 2015
2018 Oxygen Sensor (OS) & On-Board Inert Gas Generating System (OBIGGS) for Tejas MK
II.
4. Preparing Manufacturing Route Cards, Work Order and Bill of Materials and
experience in Performing Failure analysis.
5. Documenting and Reporting the Out-Year Forecasts, Failure Pattern and the Life Data
Analyses, to the Technical Review Board by adhering to the Policies and Standard
Templates.