Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Hp0-Y13 Procurve Network Management

Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 32

HP0-Y13

ProCurve Network Management

Version 1.0
QUESTION NO: 1

Which management user profiles are defined in PCM? (Select two.)

A. Viewer
B. Manager
C. Database
D. System level
E. Administrator

Answer: A, E

QUESTION NO: 2

Which device management capabilities are supported by the Configuration Manager? (Select
three.)

A. Restoring a configuration to a switch


B. Changing the discovery seed device
C. Comparing the configuration files of two different switches
D. Applying a configuration template to a newly discovered switch
E. Triggering an alert after a specified number of configuration file saves

Answer: A, C, D

QUESTION NO: 3

Which file must be configured on the PCM management server to authorize a remote PCM
client?

A. Registry
B. Access.txt
C. Pcmclient.db
D. Authorize.cfg

Answer: B

QUESTION NO: 4

Which statements are true about the XRMON and sFlow methods used by the Traffic Monitor?
(Select two.)

A. Layer 2,3, and 4 packet headers are examined by each method.


B. XRMON is an IETF standard that has been derived from the sFlow method.
C. Each method requires that an agent be individually installed on the PCM+ management
server.
D. The results displayed in the Traffic Monitor are equivalent for data collected using either
method.
E. Wirespeed performance is achieved on high-end switches because the methods are
implemented in software.
Answer: A, D

QUESTION NO: 5

Which statements are true about the VLAN Manager? (Select two.)

A. A device can be enabled or disabled as an IGMP querier.


B. The name of a VLAN can be synchronized across all devices.
C. VRRP operation can be enabled or disabled on a single VLAN.
D. A VLAN ACL can be applied to one or more devices in a VLAN.
E. 802.1X port-access authentication can be enabled on one or more ports of a VLAN.

Answer: A, B

QUESTION NO: 6

Which statements are true about the RMON Manager? (Select three.)

A. Alarm thresholds can be configured at the port level.


B. It provides the same traffic data as sFlow and XRMON.
C. It provides statistics that include packet size distribution.
D. It is an optional plug-in that is separate from the Traffic Monitor.
E. It operates based on rising and falling threshold levels being detected.

Answer: A, C, E

QUESTION NO: 7

Which secure network management features are available in PCM+? (Select three.)

A. SSH switch access


B. SNMPv3 switch access
C. IPSec VPN tunnel to PCM+
D. SSL web interface to PCM+
E. RADIUS authentication of PCM+administrators

Answer: A, B, E

QUESTION NO: 8

Where is the information stored that is displayed in the Events browser?

A. Alarms Log
B. Events Table
C. Device Syslog
D. Alerts Database

Answer: B

QUESTION NO: 9
Which information must be specified when installing the IDM management server?

A. Type of RADIUS server


B. Domain or realm name
C. Ip address of the user directory
D. Whether a ProCurve NAC 800 will be used

Answer: B

QUESTION NO: 10

Which CIP file type references the Action ID that is defined in the user-defined action file?

A. Global property
B. Object identifier
C. Trap configuration
D. User-interface trigger

Answer: D

QUESTION NO: 11

Which CIP file type must be configured to add a non-ProCurve device to PCM?

A. Object identifier
B. Trap configuration
C. User-defined action
D. User-interface trigger

Answer: A

QUESTION NO: 12

Which VLAN settings can be configured using the VLAN Manager? (Select two.)

A. Jumbo frames
B. DHCP snooping
C. Quality of service
D. Ip configuration method
E. Untagged or tagged port status

Answer: D, E

QUESTION NO: 13

Which criterion can be used to specify the source or target devices when configuring a policy
using the Policy Manager?

A. Custom groups
B. Software versions
C. Dns names with a wildcard
D. Ip addresses using CIDR notation

Answer: A

QUESTION NO: 14 CORRECT TEXT

What is required to use the automatic product registration feature in PCM?

A. The devices to be registered must support SSH.


B. The devices must be based on the Provision ASIC hardware.
C. The username and password of a My ProCurve account must be provided.
D. The devices must be specified using an IP address range or domain name prefix.

Answer: C

QUESTION NO: 15

Which attributes can be referenced in an IDM Access Rule to determine the Access Profile that
will apply? (Select two.)

A. Username
B. IP address
C. WLAN SSID
D. Operating system
E. Endpoint integrity status

Answer: C, E

QUESTION NO: 16

Which IGMP settings can be configured using the VLAN Manager? (Select two.)

A. Forced fast leave


B. IP multicast mode
C. Allocated bandwidth
D. Multicast IP address
E. Maximum members of multicast group

Answer: A, B

QUESTION NO: 17

Which authentication mechanisms are supported on an edge device when used with IDM?
(Select two.)

A. Web
B. WPA
C. 802.1X
D. Local user
E. Switch-to-switch
Answer: A, C

QUESTION NO: 18

Which statements are true about the registration and licensing of PCM and PCM+? (Select two.)

A. The registration ID is needed only if you are licensing PCM+.


B. To generate a license for PCM or PCM+, you need to provide an installation ID.
C. To download product updates for PCM and any plug-ins, the products must be registered.
D. A license is automatically downloaded by the management server the first time a check for
updates occurs.
E. A licensed instance of PCM+ can be installed on up to one additional server for standby
backup operations.

Answer: A, B

QUESTION NO: 19

Which statement is true about the PCM live view of a device?

A. The WebAgent must be enabled on the device.


B. It provides a summary of key performance indicators.
C. It includes indicators for the operating temperature and fan speeds of a device.
D. For a modular switch, a module can be taken offline by clicking the emulated front panel slot.

Answer: A

QUESTION NO: 20

Which products are supported as plug-ins for PCM+? (Select two.)

A. Events Manager
B. Identity Driven Manager
C. Network Immunity Manager
D. Device Configuration Manager
E. Vulnerability Database Manager

Answer: B, C

QUESTION NO: 21

Which statements are true about the operation of the PCM discovery process? (Select two.)

A. Custom discovery methods can be defined.


B. It consists of four phases that run at configurable intervals.
C. Telnet or SSH are used to learn device attribute information.
D. The scope of discovery is limited to the managed subnets list.
E. A Layer 3 routing protocol is used to determine the network topology.

Answer: B, D
QUESTION NO: 22

Which device management capabilities does the Configuration Manager support? (Select three.)

A. Upgrading the boot ROM of a switch


B. Backing up the configuration file of a switch
C. Viewing a list of modules installed in a chassis switch
D. Performing a consistency check of uplink port settings
E. Applying a configuration template to a newly discovered switch

Answer: B, C, E

QUESTION NO: 23

Which criteria can be used to assign a device to a custom group when it is discovered? (Select
two.)

A. Port speeds
B. Product class
C. Contact name
D. Number of ports
E. Mac address range

Answer: B, C

QUESTION NO: 24

Which method can be used to access the PCM database externally?

A. SSH
B. MMC v2
C. MySQL CLI
D. MIB browser

Answer: C

QUESTION NO: 25

Which methods of traffic data collection supported by the Traffic Monitor involve examining
packet headers? (Select two.)

A. vmstat
B. sFlow
C. PerfMon
D. XRMON
E. MIB-II statistics

Answer: B, D

QUESTION NO: 26
You are deploying IDM in a network that will include a ProCurve 5408zl switch and Microsoft IAS.
Which protocols are supported by the switch for communication with the RADIUS server that
authenticates 802.1X supplicants? (Select two.)

A. EAP-RADIUS
B. MD5-RADIUS
C. CHAP-RADIUS
D. PAP-SPAP-RADIUS
E. MS-CHAPv2-RADIUS

Answer: A, C

QUESTION NO: 27 CORRECT TEXT

Which statement is true about external access to the PCM database?

A. Access is supported from the PCM management server station only.


B. To access the database, a user must be authenticated through RADIUS.
C. Read-write access is provided by default, but can be restricted to read only.
D. To access the database, a PCM management user must have the necessary permission
enabled.

Answer:
Pending. Send us your suggestions to manager@certpaper.com

QUESTION NO: 28

Which statements are true about the operation of the Traffic Monitor? (Select three.)

A. sFlow traffic data are sent to the PCM+ management server using SSL
B. XRMON sends traffic statistics to the PCM+ management server using SNMP.
C. Threshold-based alarms can be customized at the port level for each traffic metric.
D. The Top Talkers graphical view can differentiate traffic volume due to data, voice, and video
traffic.
E. The HP ProCurve Traffic Launch Service must be running on the PCM+ management server
for collected data to be processed.

Answer: B, C, E

QUESTION NO: 29

Which type of information does the Configuration Manager allow you to export for a previously
discovered device?

A. System performance statistics


B. Authentication status of 802.1X ports
C. Software version and boot ROM version
D. Percentage of ports connected during a time period

Answer: C
QUESTION NO: 30

Which statement is true about the types of management users supported in PCM?

A. Custom user types can be created using predefined permission levels.


B. Only the administrator created during installation can create additional users.
C. Users can be imported from Active Directory instead of manually defining them.
D. For the administrator created during installation, only the password can be changed.

Answer: D

QUESTION NO: 31

Which product integrated with PCM+ can dynamically assign an ACL to a switch port?

A. Mobility Manager
B. Identity Driven Manager
C. Network Node Manager
D. Network Access Controller

Answer: B

QUESTION NO: 32

How many configuration files from a single device can be compared at the same time using
PCM+?

A. Two
B. Three
C. Four
D. Five

Answer: A

QUESTION NO: 33

Which information is shown if the Find Node tool successfully locates a ProCurve switch?

A. System information summary


B. List of connected neighbor devices
C. Status of untagged and tagged ports
D. Graphical representation of the front panel

Answer: B

QUESTION NO: 34

When can you use the Policy Manager? (Select three.)

A. When taking an action in response to an alert notification


B. When running a network consistency check report on-demand
C. When performing periodic configuration scans for a group of devices
D. When initiating endpoint integrity testing when a device connects to a switch port
E. When synchronizing the PCM management users database with Active Directory

Answer: A, B, C

QUESTION NO: 35

You have a device that is not natively supported by PCM. You want to allow PCM to manage it.
You have decided to use the CIP to take advantage of the device management capabilities of
PCM. What is an example of a PCM capability that can be provided for the device through the
CIP?

A. Displaying a Live View of the device


B. Performing endpoint integrity testing of the device
C. Adding IDM attributes that can be applied to device ports
D. Downloading software updates from the ProCurve support site

Answer: A

QUESTION NO: 36

Which criteria can be specified when configuring an event-based alert using the Policy Manager?
(Select two.)

A. User group
B. DNS domain
C. Message text
D. Time duration
E. IP address range

Answer: C, D

QUESTION NO: 37

How is the starting point for PCM discovery determined?

A. Configured seed device IP address


B. First device to respond to an SNMP get request
C. Lowest IP address on the management server's subnet
D. Highest MAC address in the management server's ARP table

Answer: A

QUESTION NO: 38

Which function is equivalent to using the "Capture configuration" option of the Configuration
Manager's CLI Wizard?

A. Scanning the configuration


B. Saving the changes to flash memory
C. Displaying a snapshot of the wizard results
D. Copying the configuration to the secondary flash

Answer: A

QUESTION NO: 39

Which features are only available in PCM+? (Select three.)

A. Events browser
B. Custom device groups
C. Configuration templates
D. Sflow traffic monitoring
E. Configurable Integration Platform

Answer: C, D, E

QUESTION NO: 40

Which VLAN settings can be configured using the VLAN Manager? (Select two.)

A. Traffic mirroring
B. Managed subnet
C. IP helper address
D. Multinetted IP addresses
E. Secure Management VLAN

Answer: B, D

QUESTION NO: 41

Which file formats does the Policy Manager support for policies that generate reports? (Select
three.)

A. CGI
B. XML
C. SQL
D. CSV
E. PDF
F. HTML

Answer: D, E, F

QUESTION NO: 42

Which information are you prompted for when running the PCM Installation Wizard? (Select
three.)

A. DNS name or IP address of a RADIUS server


B. IP address of a device to start discovery from
C. SNMP version to be used for device management
D. SSL port number to use for secure web management
E. maximum number of switch and access points to be managed
F. manager-level username and password used for switch access

Answer: B, C, F

QUESTION NO: 43

Which device group folder is used when assigning devices through the Configurable Integration
Platform API?

A. Others
B. End-nodes
C. Unknown Devices
D. User-defined Devices

Answer: D

QUESTION NO: 44

Which configuration task must you perform to use an event-driven policy?

A. Create an alert.
B. Define a schedule.
C. Assign a custom group.
D. Customize event messages.

Answer: A

QUESTION NO: 45

Which information does PCM discovery acquire from a device using LLDP?

A. VLAN Iist
B. ARP table
C. Bridge MIB
D. Routing table
E. Neighbor table

Answer: E

QUESTION NO: 46

Which authentication mechanisms can be supported on an edge device when used with IDM?
(Select two.)

A. MAC
B. WPA
C. 802.1X
D. Local user
E. Switch-to-switch

Answer: A, C
QUESTION NO: 47

Which methods of traffic data collection supported by the Traffic Monitor use a sampling
technique? (Select two.)

A. sFlow
B. virtMon
C. XRMON
D. Load averaged
E. MIB II statistics

Answer: A, C

QUESTION NO: 48

Which statement is true about installation of PCM+?

A. A SQL server must be installed and running prior to initiating the PCM+ installation.
B. The installation of Mobility Manager with PCM+ requires the use of a local or remote RADIUS
server.
C. Optionally, the local PCM+ client can be installed as an MMC snap-in on the PCM+
management server.
D. When installed on the same system as HP OpenView Network Node Manager, PCM+ installs
itself as a plug-in.
E. Plug-in components can be installed on the same server as PCM+ or as standalone
applications on a separate server.

Answer: D

QUESTION NO: 49

Which management user profiles are defined in PCM? (Select two.)

A. Operator
B. Super user
C. System level
D. No permissions
E. Device Manager

Answer: A, D

QUESTION NO: 50

Which methods of traffic data collection are provided by the Traffic Monitor? (Select three.)

A. sFlow
B. PerfMon
C. XRMON
D. load averaged
E. MIB II statistics
Answer: A, C, E

QUESTION NO: 51

Which information must be specified when installing the IDM agent? (Select two.)

A. Domain or realm name


B. Type of user authentication
C. Dns name of the user directory
D. Whether a ProCurve NAC 800 is used
E. IP address of the IDM management server

Answer: D, E

QUESTION NO: 52

Which Policy Manager option can be configured using the Preferences window?

A. Forwarding policy events generated during policy execution as traps


B. Performing virus scanning before committing changes made by a policy
C. Checking for device software updates after a threshold error limit is reached
D. Logging actions that would be taken by policies, but do not allow device configuration changes

Answer: D

QUESTION NO: 53

Which data sources can be used for importing users into IDM? (Select three.)

A. XML
B. CSV
C. HTML
D. LDAP
E. Active Directory

Answer: A, D, E

QUESTION NO: 54

Which method can be used to access the PCM database externally?

A. XML
B. SSH
C. MMC
D. ODBC
E. MIB browser

Answer: D

QUESTION NO: 55
Which CLI command is equivalent to using the Commit to flash option of the Configuration
Manager's CLI Wizard?

A. Reload
B. Write memory
C. Copy flash flash
D. Boot system flash primary

Answer: B

QUESTION NO: 56

Which file management and performance options does the Configuration Manager allow you to
configure? (Select two.)

A. Minimum software version allowed


B. Number of Syslog entries maintained
C. Number of concurrent scan operations
D. Number of configuration files to maintain per device
E. Number of alerts per hour if configuration change is detected

Answer: C, D

QUESTION NO: 57
What do you do to install the latest released software update for a ProCurve switch using PCM+?

A. Scan the switch using the Configuration Manager.


B. Run the PCM+ consistency check policy against the switch.
C. Download the software versions list to the PCM+ management server.
D. Download the software image file and unpack it in the PCM+ management server's download
folder.

Answer: C

QUESTION NO: 58

Which protocol does the Ping Sweep phase of PCM discovery use to query all devices in a
managed subnet?

A. ARP
B. LLDP
C. VRRP
D. SNMP

Answer: D

QUESTION NO: 59

Which criteria can be specified when configuring an event-based alert using the Policy Manager?
(Select two.)
A. OID value
B. Timestamp
C. Software version
D. IP address range
E. Message severity

Answer: A, E

QUESTION NO: 60

Which statements are true about the management of PCM events? (Select two.)

A. The percentage of events maintained can be configured per severity level.


B. Acknowledging an event causes PCM to send a trap to the specified device.
C. By default, archived events are saved to the FTP server defined in the Preferences tool.
D. When the maximum number of events is reached, the events are automatically archived.
E. Event filtering allows PCM to drop received traps matching specified criteria during high traffic
periods.

Answer: A, D

QUESTION NO: 61

Which statements are true about the registration and licensing of PCM or PCM+? (Select two.)

A. Each installation instance of PCM results in a new installation ID.


B. For PCM+, the license key is based on the registration ID and installation ID.
C. PCM+ features become unavailable in the user interface after 90 days if a license is not
installed.
D. The automatic device registration feature is used to maintain compliance with the number of
licensed PCM+ clients.

Answer: A, B

QUESTION NO: 62

While running the Software Update Wizard, you notice that you cannot select the latest version of
software recently released for a ProCurve 5406zl switch. What is an explanation for this problem?

A. The software image file has not been unpacked in the PCM download folder.
B. A My ProCurve account has not been correctly specified in the Preferences window.
C. The installed PCM license does not support installation of updates using the wizard.
D. The latest procurve_firmware.prp file has not been downloaded using the Preferences window.

Answer: D

QUESTION NO: 63

Which statements are true about the PCM client? (Select two.)

A. An SSL browser session is required to access the PCM user interface.


B. The PCM user interface can be accessed from a Windows or Macintosh computer.
C. PCM allows only one simultaneous client connection; PCM+ allows an unlimited number.
D. To download the PCM client using a web browser, you connect to port 8040 of the PCM
management server.
E. The PCM management server can use an IP address, DNS name, or shared secret to
authorize a remote PCM client.

Answer: D, E

QUESTION NO: 64

What can the Configuration Manager use to transfer a configuration file between the PCM
management server and a device? (Select two.)

A. SSL
B. FTP
C. Telnet
D. SCP
E. TFTP
F. FTPS
G. HTTP

Answer: D, E

QUESTION NO: 65

Which statistical attributes are displayed by the Traffic Monitor? (Select two.)

A. Frames/second
B. Memory utilization
C. Multicasts/second
D. Min/max free buffers
E. Packet size distribution

Answer: A, C

QUESTION NO: 66

Which criterion must be met for PCM to process received traps?

A. The SNMP trap receiver service must be started.


B. The SNMP trap port must be enabled in the PCM Preferences tool.
C. The IP address of each SNMP trap sender must be defined in PCM.
D. The SNMP community string must be set to "public" in received traps.

Answer: D

QUESTION NO: 67

Which VLAN Manager capability is supported by PCM and PCM+?

A. Synchronizing VLAN names


B. Viewing a graphical map ofVLANs
C. Deleting a VLAN from a single device
D. Setting the maximum VLANs per device

Answer: B

QUESTION NO: 68

What must you do if the IDM management server operates with a remote RADIUS server?

A. Import the RADIUS remote access policies into IDM.


B. Define the IDM management server as a RADIUS client.
C. Specify the IP address of the RADIUS server in the access.txt file.
D. Configure the shared secret of the RADIUS server in the IDM Preferences window.

Answer: C

QUESTION NO: 69

Which statement is true about licensing options for PCM+ and its supported plug-ins?

A. PCM+ licensing is based on the number of devices managed.


B. Identity Driven Manager licensing is based on the number of devices managed.
C. Mobility Manager licensing is based on the number of wireless clients managed.
D. Network Immunity Manager licensing is based on the number of installed instances.

Answer: A

QUESTION NO: 70

Which option can be specified when configuring a schedule-driven alert using the Policy
Manager?

A. Sleep time, if no problems are detected


B. Number of retries, if a device is unreachable
C. Run at first opportunity, if a schedule is missed
D. Allow only a PCM administrator level user to enable

Answer: C

QUESTION NO: 71

Which criteria can be specified when using the Node to Node Path Trace tool? (Select three.)

A. DNS NAMES
B. Device types
C. IP addresses
D. Search all paths
E. MAC addresses
F. Subnet addresses
G. Maximum Layer 3 hops
H. Strict source routing paths
Answer: A, C, E

QUESTION NO: 72

Which actions can be initiated within the PCM Live View window of a device? (Select two.)

A. Access the CLI


B. Display an ACL
C. Quarantine a port
D. Disable or enable a port

Answer: A, D

QUESTION NO: 73

Which statement is true about the PCM client architecture?

A. The client can be installed on Windows, Linux, and Macintosh computers.


B. The client can be installed on several types of computers without requiring a license.
C. The client performs network data collection and stores the data on the management server.
D. The client installation is initiated using a browser and connecting to port 443 of the
management server.

Answer: B

QUESTION NO: 74

Which criterion can be specified when you use the Find Node tool to locate an access point?

A. SSID
B. WLAN
C. VLAN ID
D. IP address

Answer: D

QUESTION NO: 75

Which statements are true about the PCM access.txt permissions file? (Select two.)

A. A range of IP addresses can be specified using CIDR notation.


B. Only PCM+ clients using static IP addresses can be allowed access.
C. Read-only or re ad-and-write access can be specified for each PCM client.
D. By default, the file is empty, which allows access from the local PCM client only.
E. Multiple PCM clients can be allowed access, based on a DNS domain name with a wildcard.

Answer: D, E

QUESTION NO: 76 CORRECT TEXT

Which statements are true about the implementation of PCM+ and IDM? (Select two.)
A. The PCM+ access.txt file is used to authorize access from remote PCM clients.
B. Deploying the IDM configuration involves sending updates to selected IDM agents.
C. The IDM management server cannot be installed on the same system as the IDM agent.
D. A PCM management user must have the IDM permission enabled to edit the IDM
configuration.

Answer:

Pending

Send us your suggestions to manager@certpaper.com

QUESTION NO: 77

Which features are only available in PCM+? (Select two.)

A. Node-to-node path trace tool


B. VLAN network topology views
C. Device discovery using LLDP/MED
D. Switch-to-switch consistency checking
E. Device access through web and CLI interfaces

Answer: A, D

QUESTION NO: 78

Which options can be configured for a PCM management user? (Select two.)

A. Disable idle logout timer


B. Use only RADIUS authentication
C. Require confirmation of device changes
D. Grant external access to PCM database
E. Restrict viewing and access to devices by type

Answer: B, D

QUESTION NO: 79

Which object is equivalent to a Network Resource Access Rule in IDM?

A. Access Policy Group


B. Access Control Entry
C. Remote Access Policy
D. Network Dial-in Restrictions

Answer: B

QUESTION NO: 80

Where does the IDM agent need to be installed?


A. On the edge switch
B. On the DHCP server
C. On the RADIUS server
D. On the remote PCM+ client
E. On the Active Directory server

Answer: C

QUESTION NO: 81 CORRECT TEXT

Which attributes can IDM apply to a session after a user has been authenticated? (Select two.)

A. User group
B. Logout time
C. VLAN identifier
D. Ingress rate limit
E. Egress rate limit

Answer:

Pending

Send us your suggestions to manager@certpaper.com

QUESTION NO: 82

Which statements are true about how PCM device access settings can be managed? (Select
three.)

A. CLI parameters can be configured per device.


B. SNMPv3 access can only be configured in PCM+.
C. WebAgent access can be enabled or disabled globally.
D. 802.1X, Web, or MAC authentication can be optionally enabled.
E. Default SSH settings can be defined for each PCM administrator.

Answer: A, B, C

QUESTION NO: 83

Which statements are true about the PCM architecture? (Select two.)

A. PCM uses its own Java instance.


B. The PCM client is a web-based interface that supports SSL.
C. The PCM datastore is implemented as a set of indexed flat files.
D. The PCM management server is comprised of three Windows services.
E. The PCM client collects network management information and stores it on the PCM
management server.

Answer: A, D
QUESTION NO: 84

Which method of traffic data collection supported by the Traffic Monitor includes the equivalent
information provided by MIB-I counters?

A. vmstat
B. sFlow
C. PerfMon
D. NetFlow

Answer: B

QUESTION NO: 85

Which statements are true about the operation of the PCM discovery process? (Select two.)

A. A discovered device must support SNMPv3 to be managed by PCM.


B. PCM automatically excludes a discovered device if excessive traffic flow is detected.
C. The management server can assign itself as a trap receiver on a discovered device.
D. By default, supported ProCurve devices are assigned to the Interconnect Devices folder.
E. A list of managed subnets is generated, based on the interfaces of each discovered router.

Answer: C, D

QUESTION NO: 86 CORRECT TEXT

Which detailed attribute does the Traffic Monitor's Top Talkers window allow you to examine for
the utilization percentage statistic?

A. Link errors
B. Multicasts

Answer:

Pending

Send us your suggestions to manager@certpaper.com

QUESTION NO: 87

Which statement is true about management user types supported in PCM?

A. Any user can change his own password without restrictions.


B. The no permissions user type is used to temporarily disable a user's access to PCM.
C. The minimum length of a password is eight characters and must contain at least one special
character.
D. At most, one administrator user type can be defined, but an unlimited number of other user
types can be defined.
Answer: A

QUESTION NO: 88

Which criterion can be specified when you use the Find Node tool to locate n end-user computer?

A. Slot ID of a switch
B. MAC address of the client
C. NetBIOS name of the client
D. IP address of the PCM server

Answer: B

QUESTION NO: 89

You have a device that is not natively supported by PCM. You want to allow PCM to manage it.
You have decided to use the CIP to take advantage of the device management capabilities of
PCM. What is an example of a PCM capability that can be provided for the device through the
CIP?

A. Loading the XRMON agent onto the device


B. Adding IDM attributes that can be applied to device ports
C. Defining the custom group to which the device is assigned
D. Using the Instrumentation Monitor to collect performance data from the device

Answer: C

QUESTION NO: 90

Which capability does PCM+ support for managing ProCurve device software updates?

A. The PCM+ management server can periodically download a software versions list to determine
if updates are available.
B. ProCurve switches that support the PCM+ Policy Manager can be scheduled to check the
ProCurve download FTP site directly.
C. Software image files can be downloaded directly to a USB drive on switches that support them
and scheduled for installation at a later time.
D. Checking for software updates to PCM+ and its plug-ins includes retrieving any available
software updates for currently discovered devices.

Answer: A

QUESTION NO: 91

How many configuration files can be compared at the same time using PCM+ if each one is from
a different device?

A. Zero
B. Two
C. Three
D. Four
E. Five
Answer: B

QUESTION NO: 92

Which statement is true about PCM device groups?

A. The End-nodes group is used to hold edge switches and wireless APs.
B. The Unknown device group is used to contain discovered devices that have become
unreachable.
C. If a ProCurve device is assigned to a custom group, it will be automatically removed from its
default group.
D. A product family-specific group is created below the Interconnect Devices folder when the first
device instance is discovered.

Answer: D

QUESTION NO: 93 CORRECT TEXT

Which IDM options can be enabled or disabled using the IDM Preferences window? (Select two.)

A. Monitor only mode


B. RADIUS server support
C. Enhanced wireless support
D. 802.1X user authentication
E. Only send supported attributes to devices

Answer:

Pending

Send us your suggestions to manager@certpaper.com

QUESTION NO: 94

Which restriction applies to the viewer type of PCM management user?


A. Cannot view network topologies
B. Cannot change his own password
C. Cannot access the Preferences tool
D. Cannot make configuration changes

Answer: D

QUESTION NO: 95

Which automatic customization capability does the Configuration Manager support when a
configuration template file is deployed to multiple devices?

A. Designation of uplink ports


B. Substitution of IP addresses
C. Assignment of ports to VLANs
D. Identification of ports in the Secure Management VLAN
E. Specification of unique manager and operator passwords

Answer: B

QUESTION NO: 96

Which attributes can be referenced in an IDM Access Rule to determine the Access Profile that
will apply? (Select two.)

A. Location
B. Username
C. Time period
D. VLAN identifier
E. 802.1XEAP method

Answer: A, C

QUESTION NO: 97

Which statement is true about the PCM automatic updates feature?

A. Updates can be scheduled, based on the day of the week and time of day.
B. PCM services must be stopped before initiating updates from the local download folder.
C. For updates to be installed from a local folder, the files must be extracted from the bundled file.
D. When PCM services are stopped during an update, PCM is unable to process any SNMP
traps.

Answer: D

QUESTION NO: 98

Which IDM options can be enabled or disabled using the IDM Preferences window? (Select two.)

A. radius server support


B. endpoint integrity support
C. Macintosh platform support
D. 802.1X user authentication
E. Automatic configuration deployment to IDM agents

Answer: B, E

QUESTION NO: 99

Which criterion can be specified when configuring a schedule-driven alert using the Policy
Manager?

A. The days of the week and a time for each day that a policy can run
B. The maximum occurrences that a policy can run, after which it will be disabled
C. The minimum number of occurrences a policy must run in a configurable time period
D. The upper limit on the elapsed execution time of a policy, after which it will be queued again
Answer: B

QUESTION NO: 100

Which product integrated with PCM+ uses Network Behavior Anomaly Detection to detect
attacks?

A. Mobility Manager
B. Identity Driven Manager
C. Network Access Controller
D. Network Immunity Manager
E. HP OpenView Network Manager

Answer: D

QUESTION NO: 101

Which CLI commands perform functions equivalent to those done using the Configuration
Manager's Deploy Wizard? (Select two.)

A. Ip preserve
B. Write terminal
C. Copy tftp startup
D. Startup-default primary
E. Boot system flash primary

Answer: C, E

QUESTION NO: 102

Which CIP file type is used to customize the PCM+ user interface by adding a button to the global
toolbar?

A. Global property
B. Object identifier
C. Image property
D. User-interface trigger

Answer: D

QUESTION NO: 103

Which statement is true about PCM or PCM+?

A. PCM+ is supported on Linux in addition to Windows.


B. PCM is included at no cost with all ProCurve manageable devices.
C. PCM is implemented as a Microsoft Management Console snap-in on Windows.
D. PCM+ is intended as a complete replacement for the switch CLI and web management
interfaces.
Answer: B

QUESTION NO: 104

Which statement is true about licensing options for PCM+ and its upported plug-ins?

A. Identity Driven Manager licensing is based on the number of users managed.


B. Mobility Manager licensing is based on the number of wireless clients managed.
C. ProCurve Manager Plus licensing is based on the number of installed instances.
D. Network Immunity Manager licensing is based on the number of NAC 800s managed.

Answer: A

QUESTION NO: 105

Which attributes can IDM apply to a session after a user has been authenticated? (Select two.)

A. ACL
B. Logout time
C. QoS setting
D. Broadcast limit
E. Login session limit

Answer: A, C

QUESTION NO: 106 CORRECT TEXT

Which products are supported as plug-ins to PCM+? (Select two.)

A. Policy Manager
B. Mobility Manager
C. Traffic Analysis Manager
D. Secure Access Manager
E. Network Immunity Manager

Answer: B, E

QUESTION NO: 107 CORRECT TEXT

Which capabilities are supported by the Software Update Wizard? (Select three.)

A. Boot ROM compatibility checking


B. Configuration backup after updating
C. Automated rollback of a failed update
D. Identification of duplicate schedules, if any
E. Determination of current installed version

Answer:

Pending
Send us your suggestions to manager@certpaper.com

QUESTION NO: 108

Which protocol is used during the PCM Neighbor Discovery phase?

A. LLDP
B. sFlow
C. VRRP
D. OSPF or RIP

Answer: A

QUESTION NO: 109

Which delivery methods does the Policy Manager support for policies that generate reports?
(Select two.)

A. FTP
B. Email
C. SCP
D. HTTP
E. Secure tunnel

Answer: A, B

QUESTION NO: 110

You have set the Prefer the latest version parameter in the Preferences window. Which additional
step must you take to ensure that you can install the most recent software updates?

A. Download the procurve_firmware.prp file using the Preferences window.


B. Modify the PCM permissions file to allow access to the ProCurve support site.
C. Define a policy using the Policy Manager that will download the software image files.
D. Determine the current device software versions using the Configuration Manager scan tool

Answer: A

QUESTION NO: 111

Which detailed attribute does the Traffic Monitor's Top Talkers window allow you to examine for
the utilization percentage statistic?

A. Runts
B. Unicasts
C. Link errors
D. Sources or destinations

Answer: D
QUESTION NO: 112

Which switch feature can be configured using the PCM Port List window?

A. Meshing
B. Port security
C. Virus throttling
D. Authentication method

Answer: C

QUESTION NO: 113

Which methods or protocols can be used to authenticate PCM management users? (Select two.)

A. 802.1X
B. RADIUS
C. TACACS+
D. Web-based
E. Local username/password database

Answer: B, E

QUESTION NO: 114

Which statements are true about the PCM live view of a device? (Select two.)

A. The Java Runtime Environment must be installed on the PCM client.


B. The operating temperature and fan speeds of a device can be displayed.
C. The device can be shut down or rebooted by clicking the emulated front panel buttons.
D. It provides a graphical rendering of the front panel or rendering of the front and back panels.

Answer: A, D

QUESTION NO: 115

Which modifications can you make to PCM using the CIP? (Select three.)

A. Modify the color scheme used for PCM windows


B. Add a right-click menu to the Devices List window
C. Add a tab to the Network Management Home page
D. Display third-party SNMP traps in the Events browser
E. Add an authentication method for PCM management users

Answer: B, C, D

QUESTION NO: 116

Which VLAN Manager capabilities are supported by both PCM and PCM+? (Select two.)
A. Viewing a list of VLANs
B. Adding a VLAN to multiple devices
C. Viewing a graphical map ofVLANs
D. Deleting a VLAN from a single device
E. Viewing authentication status of 802.1 X ports

Answer: A, C

QUESTION NO: 117

PCM creates graphical maps after the completion of which discovery phase?

A. ARP
B. Topology
C. Config scan
D. VLAN discovery

Answer: D

QUESTION NO: 118

Which statement is true about PCM custom groups?

A. A given device can belong to, at most, one custom group.


B. A device can be added to a custom group automatically or manually.
C. To create a custom group, you must use the Configurable Integration Platform API.
D. A custom group is used to contain non-ProCurve devices that lack support for SNMP.

Answer: B

QUESTION NO: 119

Which capabilities are supported by the Software Update Wizard? (Select three.)

A. Optional device reboot after updating


B. Automated rollback of a failed update
C. Selection of primary or secondary flash
D. Scheduled installation of a software update
E. Configuration consistency check after updating

Answer: A, C, D

QUESTION NO: 120

Which information are you prompted for when running the PCM Installation Wizard without
optional plug-ins selected? (Select three.)

A. Default domain or realm


B. Registration ID and license key
C. Whether HTTP proxy will be used
D. Password for PCM+ administrator
E. Use of telnet or SSH for default mode of CLI access
F. User groups to import from Active Directory or an LDAP server

Answer: C, D, E

QUESTION NO: 121

Which type of database architecture does the PCM database use?

A. Relational
B. Networked
C. Linked files
D. Double linked list

Answer: A

QUESTION NO: 122

How can PCM discovery be customized to meet network operation preferences? (Select
two.)

A. Each phase can be configured to run at a different interval


B. A device can be permanently excluded from future discovery processing
C. It can be automatically restarted when a threshold number of devices become
unreachable.
D. A sleep timer can be applied when a high traffic volume level is detected on
selected VLANs.
E. Devices exhibiting periodic network disconnects can be monitored using a
customized ping schedule

Answer: A, B

QUESTION NO: 123

Which statements are true about events processing in PCM? (Select two.)

A. Events from managed devices appear as SNMP traps.


B. Events can originate from PCM application components.
C. PCM+ is required to manage and archive events from managed devices.
D. A trap policy must be configured for events to be accepted from devices in a
custom group.
E. By default, when a device is discovered it is registered as a trap sender in the
PCM access.txt file.

Answer: A, B

You might also like