Gagemaker-Thread-Measurement FERST

Prices subject to change without notice 09/08 13
Thread
Measurement
When meeting engineering specifications,

the consistency and accuracy of threaded
parts are the most important factors.
Gagemaker products are second to none in
helping you achieve the highest consistency
and accuracy for your parts.
Gagemaker thread diameter gages inspect

the effects of all thread element variations
and measure the pitch diameter of both
straight and tapered threads.
During inspection of parts, our functional

thread roll gages use matched sets of
precision ground thread rolls that seat in
the flanks of the roots and crest to simulate
a functional fit. Each roll set is designed
to ANSI specification to measure unlimited
diameters for a specific thread form.
Our unrivalled pitch diameter gages use

matched precision contact point sets. During
inspection, the contact points easily seat
at the pitchline of the part and provide the
highest quality readings possible. A variety
of interchangeable contact points are
available for measuring different thread
pitches.
P.O. Box 87709, Houston, Texas 77287-7709

www.gagemaker.com Phone: (713) 472-7360 Fax: (713) 472-7241
14 09/08 Prices subject to change without notice
EXTERNAL FUNCTIONAL PD THREAD INSPECTION GAGES

(⅝” TO 24” DIAMETERS)
These functional thread inspection, or “GO” gages, measure external thread diameters. The
RG-7000
gages are adjustable within a size range and use interchangeable thread rolls to measure
different pitch threads. Setting dimensions for the functional pitch diameter gages are provided
by the TDWIN Thread Disk for Windows software package. The software and thread rolls
are sold separately. Reference the pages that follow for specific pitch thread rolls.
Model Description Range

RG-7000 External Thread Roll Gage ⅝” - 4” (25.4 mm - 101.6 mm)
RG-7001 External Thread Roll Gage 4” - 8” (101.6 mm - 203.2 mm)
RG-7004 External Thread Roll Gage 16” - 20” (406.4 mm - 508 mm)
RG-7005 External Thread Roll Gage 20” - 24” (508 mm - 609.6 mm)
RG-LAA Lower Adjustment Arm -
PG-6003
INTERNAL FUNCTIONAL PD THREAD INSPECTION GAGES

(1½” TO 24” DIAMETERS)
PG-6002
Gagemaker also manufactures functional thread inspection gages that inspect internal
threads. The gages are adjustable within a size range and use interchangeable thread rolls
to measure different pitch threads. Thread roll sets not included.
PG-6001
PG-6000 Internal Thread Roll Gage, 2½” reach 1½” - 9” (38 mm - 228.6 mm)
PG-6000 PG-6001 Internal Thread Roll Gage, 2½” reach 9” - 16” (228.6 mm - 406.4 mm)
PG-6002 Internal Thread Roll Gage, 2½” reach 16” - 24” (406.4 mm - 609.6 mm)
PG-6003 Internal Thread Roll Gage, 2½” reach 24" - 32" (609.6 mm - 812.8 mm)
PG-6000-SA Replacement Arm Set 2½” reach
PG-6000-XA Extended Reach Arm Set 4½” reach
PG-6000-17 Locking T-nut for Arms -
DEEP BORE INTERNAL THREAD GAGE

The DPG-6000 gage inspects diameters of internal threads using thread rolls. This functional
daimeter gage inspects the effects of all thread element variations and reports any deviations.
DPG-12R
All thread rolls are sold separately.

Deep bore thread roll gage assembly for 4 pitch
DPG-6000 3” - 4.300” dia., 6” Reach
and finer threads only.
DPG-6000
DPG-6R Handle Extension Assemblies 6” Reach
Diameter DPG-24R Handle Extension Assemblies 24” Reach
Extension DPG-1 Diameter Extension Arms 3” to 4.300” dia.
Arms
DPG-2 Diameter Extension Arms 4.300” to 5.100” dia.

Phone: (713) 472-7360 Fax: (713) 472-7241 www.gagemaker.com
UN SERIES THREAD ROLLS (For gages on previous page)
“TRV” thread rolls inspect the functional fit of machine threaded parts with 60° “V” thread forms. These thread rolls are
designed specifically for internal or external applications. Rolls are sold in matched sets (2 rolls). Specify the pitch of
thread when ordering.
INTERNAL THREAD DIAMETERS EXTERNAL THREAD DIAMETERS
(1½” & Larger) (1½” & Larger)
Model Description Model Description
TRVI-4P 4 pitch internal 60° “V” TRVE-4P 4 pitch external 60° “V”
ACME AND STUB ACME THREAD ROLLS (For gages on previous page)
“TRA” and “TRSA” thread rolls inspect the functional fit of parts with 29° ACME and Stub ACME thread forms. Sold in
matched sets of 2 rolls. Specify the pitch of the thread when ordering.
ACME THREAD DIAMETERS STUB ACME THREAD DIAMETERS
(1½” & Larger) (1½” & Larger)
TRA-2P 2 pitch 29° ACME TRSA-2P 2 pitch 29° Stub ACME
TRA-12P 12 pitch 29°ACME TRSA-12P 12 pitch 29° Stub ACME
ISO METRIC SERIES THREAD ROLLS (For gages on previous page)

“TRM” thread rolls inspect the functional fit of machine threaded parts with ISO Metric 60° “V” thread forms. Sold in
INTERNAL THREAD DIAMETERS EXTERNAL THREAD DIAMETERS
(38.1mm & Larger) (38.1mm & Larger)
TRMI-4P 4 mm pitch internal 60° “V” TRME-4P 4 mm pitch external 60° "V”
TRMI-3.5P 3.5 mm pitch internal 60° “V” TRME-3.5P 3.5 mm pitch external 60° “V”
TRMI-3P 3 mm pitch internal 60° “V” TRME-3P 3 mm pitch external 60° “V”
TRMI-2P 2 mm pitch internal 60° “V” TRME-2P 2 mm pitch external 60° “V”
TRMI-1.75P 1.75 mm pitch internal 60° "V” TRME-1.75P 1.75 mm pitch external 60° “V”
TRME-1P 1 mm pitch external 60° “V”
NATIONAL 7° X 45° BUTTRESS SERIES THREAD ROLLS (For gages on previous page)
“TRB” thread rolls inspect the functional fit of machine threaded parts with 7° X 45° Buttress thread forms. Sold in
Assorted Thread Rolls
THREAD DIAMETER (1½” & Larger)

TRB745-2P 2 pitch 7° X 45° Buttress TRB745-8P 8 pitch 7°X 45° Buttress
TRB745-3P 3 pitch 7° X 45° Buttress TRB745-10P 10 pitch 7°X 45° Buttress
TRB745-3.5P 3.5 pitch 7° X 45° Buttress TRB745-12P 12 pitch 7° X 45° Buttress
TRB745-4P 4 pitch 7° X 45° Buttress TRB745-16P 16 pitch 7° X 45° Buttress
TRB745-6P 6 pitch 7° X 45° Buttress - -
TRAPEZOIDAL THREAD ROLLS (For gages on previous page)

"TRT" thread rolls inspect the functional fit of machine thread parts with trapezoidal thread forms. Sold in match sets of
2 rolls. Specify the pitch of the thread when ordering.
THREAD DIAMETER (38.1 mm & Larger)

Model Description Model Description Model Description
TRT-2P 2 mm pitch Trapezoidal TRT-5P 5 mm pitch Trapezoidal TRT-9P 9 mm pitch Trapezoidal
Specials- All other thread forms- Available Prices Available Upon Request

SMALLER DIAMETER THREAD INSPECTION GAGES

⅝” (.625) TO 1 ½” (1.500) DIAMETERS
The SPG-6000 line of thread inspection gages measures internal thread diameters smaller
SPG-6000 w/ than 1.500”. The SPG-6000 can be equipped with either thread rolls or contact points.
Thread Rolls Software and thread rolls sold separately.

⅝” - 1½”
SPG-6000 Internal Pitch Diameter Gage, 1” reach
(15.9 mm - 38.1 mm)
UN SERIES THREAD ROLLS

“SRV” thread rolls inspect the functional fit of machine threaded parts with 60° “V” thread
forms. These thread rolls are designed specifically for internal applications. Rolls are sold in
matched sets (2 rolls). Rolls sold separately from gages and software. Please specify the
pitch of thread when ordering.

INTERNAL THREAD DIAMETERS
(.750 TO 1.500)
Model Description
SRVI-6P 6 pitch internal 60° “V”
Assorted Thread Rolls
ISO METRIC THREAD ROLLS

“SRM” thread rolls inspect the functional fit of machine threaded parts with 60° “V” thread
forms. These thread rolls are designed specifically for internal applications. Rolls are sold in
matched sets (2 rolls). Rolls sold separately from gages and software. Please specify the
pitch of thread when ordering.
INTERNAL THREAD DIAMETERS

(.750 TO 1.500)
Model Description
SRMI-4P 4 mm pitch
SRMI-35P 3.5 mm pitch
SRMI-3P 3 mm pitch
SRMI-2P 2 mm pitch
SRMI-1P 1 mm pitch

PITCH DIAMETER CONTACT POINT ARMS (For gage on page 16)
“SPA” contact point arms hold “SP” contact points for internal pitch diameter
measurements. (Set of 2)
SPG-6000 w/

Contact Points
SPA-265 .265” Diameter 1” Long
SPA-375 .375” Diameter 1.25” Long
SPA-437 .437” Diameter 1.50” Long
PITCH DIAMETER CONTACT POINTS (For gage on page 16)

Gagemaker’s standard ball contact points are manufactured with spherical carbide contact
balls. Standard contact diameters are held to tolerances of + .0002". “SP” contact points
fit “SPA” contact point arms only Contact sizes are matched closely to thread inspection
wire sizes. These contact sizes are used in the TDWIN Thread Disk for Windows software
program.
UN
Model Thread Pitch
SP-105 5 pitch
SP-096 6 - 7 pitch
SP-072 8 - 9 pitch
SP-057 10 pitch
SP-050 11.5 - 12 pitch
SP-041 13 - 16 pitch
SP-032 18 - 20 pitch
ACME/STUB ACME
Model Thread Pitch
SP-105T 5 pitch
SP-090T 6 pitch
SP-062T 8 pitch
SP-050T 10 pitch
SP-041T 12 - 14 pitch Contact Points Arms
SP-032T 16 pitch
INTERNAL METRIC
Model Thread Pitch
SP-105 4.5 - 4.75 mm
SP-096 4 - 4.25 mm
SP-072 3 - 3.5 mm
SP-057 2.5 mm
PD Contact Points
SP-041 1.5 - 2 mm
SP-032 1 - 1.25 mm

THREAD PROFILE AND SPECIAL GROOVE PROFILE GAGES

STRAIGHT THREAD PROFILE GAGES
Gagemaker manufactures precision straight thread profile gages for the quick identification
of product thread forms. Specify the pitch of the thread to be inspected when ordering.
Special form profiles are available and are quoted upon request.
Model Description Order Example
TP-UNVI-2P,
TP-UNVI-__P Internal UN series thread gage
TP-UNVE-4P,
TP-UNVE-__P External UN series thread gage TP-SA-8P, etc.
TP-GPA-__P Internal/external general purpose ACME thread profile gage
TP-SA-__P Internal/external Stub ACME thread profile gage *Overlays for all of
TP-SAM2-__P Modified 2 Stub ACME thread profile gage these profile gages
TP-MI-__P Internal ISO Metric series thread profile gage are available*
TP-ME-__P External ISO Metric series thread profile gage
TP-745-__P Internal/External 7° X 45° Buttress thread profiile gage
BX - Dog Bone Paddle Gage

DBBX-150 Dog Bone Ring Groove Gage BX-150 DBBX-162 Dog Bone Ring Groove Gage BX-162
Assorted Thread Profile Gages DBBX-161 Dog Bone Ring Groove Gage BX-161 DBBX-303 Dog Bone Ring Groove Gage BX-303
BX - Groove Profile & Width Go/NoGo Gage

BXP-150 Go / NoGo Profile Gage BX-150 BXP-162 Go / NoGo Profile Gage BX-162
BX- Groove Profile & Width BXP-155 Go / NoGo Profile Gage BX-155 BXP-167 Go / NoGo Profile Gage BX-167
Go/NoGo Gage BXP-156 Go / NoGo Profile Gage BX-156 BXP-168 Go / NoGo Profile Gage BX-168
BX- Dog Bone Paddle Gage R & RX - Dog Bone Paddle Gage
DB-R20 Dog Bone Ring Groove Gage R-RX20 DB-R57 Dog Bone Ring Groove Gage R-RX57
R & RX- Dog Bone Paddle Gage DB-R35 Dog Bone Ring Groove Gage R-RX35 DB-R74 Dog Bone Ring Groove Gage R-RX74
(DB-R23) DB-R37 Dog Bone Ring Groove Gage R-RX37 DB-R82 Dog Bone Ring Groove Gage R-RX82
DB-R54 Dog Bone Ring Groove Gage R-RX54

R-RX - Groove Profile & Width Go/NoGo Gage
Model
Corresponding R Groove Size
(RP-Depth-Width)*
RP-250-344 R 20
RP-310-469 R 23 to R45, R49, R53, R57, R65, R69, R82, R84, & R99 TI-60
RP-380-531 R46, R73, R85
RP-440-656 R50, R54, R66, R86, R87
RP-500-781 R47, R70, R74, R88
RP-560-906 R90
RP-620-1063 R63
RP-690-1313 R91
*ex. RP-250-344 = .250”(depth), .344” (width)
TAPERED INSERT IDENTIFIERS TP-RTC-8R

New! Gagemaker's new tapered thread insert indentifier easily determines which threading insert
the machinist is using. When an optical comparator is unavailable, the insert indentifier will show
which thread form is on the insert.
Model TPF Thread Forms
TI-60 1.5", 2", & 3" V032, V038R, V040, V050, V055, V065, V076
TI-90 1.25", 2", 3", & 3.373" A-094, 90-V-050, 90-V-084
TAPERED THREAD PROFILE GAGES TP-935-3-JSS

Gagemaker also manufactures precision tapered thread profile gages for the quick identification
of product thread forms. Specify the connection which is to be inspected when ordering. Special
profiles will be quoted upon request.
Model Connector Type TPF/TPI , Thread Form
2⅜” - 3½” P.A.C. Connections
TP-415076 1.5” TPF, 4 TPI, V-076
2⅜” - 3½” American Open Hole
TP-RTC-8R API 8-Round Casing, Tubing & Drill Pipe ¾” TPF, 8 TPI, 8 Round
TP-RTC-10R API 10-Round Tubing ¾” TPF, 10 TPI, 10 Round TP-5BTC75-INT
TP-8V 8V API Line Pipe, American Std. NPR ¾” TPF, 8 TPI, 8 V Thread
TP-11-1/2V 11½ V API Line Pipe, American Std. NPT ¾” TPF, 11½TPI, 11½ V Thread
TP-5BTC75-INT API Buttress Casing, Internal, 4½” - 13⅜” ¾” TPF, 5 TPI
TP-5BTC75-EXT API Buttress Casing, External, 4½” - 13⅜” ¾” TPF, 5 TPI
TP-5BTC1-INT API Buttress Casing, Internal, 16” - 20” 1” TPF, 5 TPI
TP-5BTC1-EXT API Buttress Casing, External, 16” - 20” 1” TPF, 5 TPI
2⅜” - 4½” API REG
TP-453-JSS 3” TPF, 5 TPI, V-040 TP-5BTC1-INT
2⅞” , 3½”, 4½” API Full Hole
6⅝” API REG
TP-542-JSS 2” TPF, 4 TPI, V-050
5½” & 6⅝” API Full Hole
TP-543-JSS 5½”, 7⅝”, & 8⅝” API REG 3” TPF, 4 TPI ,V-050
TP-6232-JSS 2⅜" - 2⅞” Hughes External Flush 2” TPF, 6 TPI, V-032
4” API Full Hole,
TP-642-JSS 2⅞” - 5” Hughes Xtra Hole, 2” TPF, 4 TPI, V-038R
2⅜” - 4½” Hughes Slim Hole
2⅞” Hughes Xtra Hole TP-453-JSS
TP-642-H-JSS 2” TPF, 4 TPI, V-038R
2⅜” Hughes Slim Hole
2⅜” - 6⅝” Internal Flush
TP-23-50-JSS 2” TPF, 4 TPI, V-038R
API Numbered Connectors #23 - #50
TP-56-77-JSS API Numbered Connectors #56 - #77 3” TPF, 4 TPI, V-038R
API Numbered Connectors #10, #12, #13, #16
TP-10-16-JSS 1.5” TPF, 6 TPI, V-055
M.T. (Macaroni Tubing)
TP-935-2-JSS 3½”- 6⅝” Hughes H-90 2” TPF, 3.5 TPI, 90-V-050
TP-935-3-JSS 7” - 8⅝” Hughes H-90 3” TPF, 3.5 TPI, 90-V-050 TP-5BTC1-EXT
TP-931-1/4-JSS 2⅜” - 3½” Hughes Slim Line 1.25” TPF, 3TPI, 90-V-084
90° & 60° Threads, Tool Grinding & Setting
TP-9060LS-JSS Tool Grinding & Setting Gage
Gage
TP-NPT-8 NPT Threads ¾” TPF, 8 TPI
TP-NPT-11-1/2 NPT Threads ¾” TPF, 11.5 TPI
TP-NPT-14 NPT Threads ¾” TPF, 14 TPI
Specials Available Upon Request
Tooth Width
Overlay Charts are also available. For information on those available, please see price supplement. Specials Special
are also available. For Special Overlays, please specify the following:
1. Screen Size
2. Magnification 20X/50X
3. Product Form or Profile Template

PIT DEPTH GAGES

The PD-3000 series of gages inspect the depth of surface pitting on tubular goods. The
PD-3003 gage also accepts other types and sizes of contact points for use in other applications,
such as groove and thread depth inspection. Select the PD-3000 gage model based on
the type of indicator required.
Model Description Range Cross Ref.

PD-3003 Pit Depth Gage, AGD #1, 0-100 .250 4486-D
PD-3004 Pit Depth Gage, AGD #2, 0-100 .450 -
PD-3005 Pit Depth Gage w/ Flat Base, AGD #2, 0-100 .450 -
PD-3004 PD-3006 Pit Depth Gage w/ 6" Long Flat Base, AGD #2, 0-100 .450 -
PD-3007 Pit Depth Gage w/ 6" Long V Base, AGD #2, 0-100 .450 -
PD-3000BF Pit Depth Flat Base Only - -
PD-3000BV Pit Depth V Base Only - -
PD-3000BF-6 Pit Depth 6" Long Flat Base Only - -
PD-3000BV-6 Pit Depth 6" Long V Base Only - -
PD-3000BX Setting BX/BXG Gage, ½" X ½" U-notch - -
PD-3005 EXTERNAL THREAD HEIGHT GAGES

Gagemaker manufactures many models of external thread height gages. Specify the type of
thread when ordering.
Min. Cross
Model Description Connection* Travel
Bore Ref.
External Thread Height,
TH-3002B ¾” Buttress (T072) .094" 2.930" 5886-C
0-25-0
PD-3000BX External Thread Height,
TH-3003B 1” Buttress (T072) .094" 2.930" 5886B16
0-25-0, Step Base
External Thread Height
TH-3002BB ¾” TPF Buttress - - -
Base Only
TH-3003BB 1” Buttress - - -
Base Only
PD-3000BF-6
TH-3001R 8-Round (T501) .162" 3.400" 6709-L
0-100

TH-3002R 8-Round (T501) .162" 3.400" 6709-M
0-50-0
TH-3002RB 8-Round (T501) - - -
Base Only
TH-3001R
TH-3000- External Thread Height,
Tool Joint (T072) .196" 3.230" -
RSC 0-100
TH-3001PD Now is the TH-3001V Same as TH-3001V - - -

TH-3001S 8-Round (T072) .196" 3.230" -
0-100
TH-3001V External Thread Height, Line Pipe (T500C),
.196" 3.230" 5886
0-100 ACME, UN, Stub ACME
External Thread Height, Line Pipe/Tool Joint
TH-3002V .196" 3.230" 5886-A
0-50-0 (T500C)
TH-3002VB Line Pipe/Tool Joint - - -
Base Only
TH-3001V
*Contact point noted in parentheses.
Ex.: 1” Buttress (T072) shows that the T072 is the proper contact point for TH-3003B.
TH-3001S

INTERNAL THREAD HEIGHT GAGES
Gagemaker also manufactures several models of internal thread height gages. Please
specify the type of thread when ordering. TH-3008
Min. Cross
Model Description Connection* Travel
Bore Ref.
TH-3004 Internal Thread Height, 0-25-0 Line Pipe (T500C) .105" 1.575" 5785-D
TH-3006 Internal Thread Height, 0-25-0 8-Round (T502/T503) .105" 1.595" 7705-A
TH-3008 Internal Thread Height, 0-25-0 8-Round (T502/T503) .094" 1.575" -
TH-3009
TH-3009 ¾” Buttress (T072),
Internal Thread Height, 0-25-0 .250" 1.750" -
UN, ACME, Stub ACME
TH-3009PD Now is just the TH-3009 Same as TH-3009 - - -
TH-3009- Rotary Shouldered
Internal Thread Height, 0-25-0 .285" 1.785"
RSC Connections
TH-3010 1” Base Length (TPD,
Internal Thread Height, 0-25-0 .250" 1.750" -
T500) TH-3010
TH-3012 Internal Thread Height, 0-25-0 ¾” - 2” NPT .090" .750" -
TH-3004DD Doug Dunford Special Clip Gage Ultra .105" 1.575" -
*Contact point noted in parentheses.
Ex.: 3/4” Buttress (T072) shows that the T072 is the proper contact point for TH-3009
THREAD HEIGHT GAGE STANDARDS

TH-3004
Gagemaker manufactures mandated precision setting standards for presetting thread height
gages. All of these are API mandated standards. Please specify the type of thread when
ordering.
Model Description Cross Ref.

1014 8 & 10 Round Threads 6780-J
1014S 8 & 10 Round Threads (crest to Pitchline “Shave”) -
TH-3006
1015 8 & 11½ Pitch “V” Threads 6780-L
1017 13⅜” & Smaller Buttress, ¾” TPF 1233-A
1018 16” & Larger Buttress, 1”TPF 1233-SB16
10322-RS V-032, 2 TPF Rotary Shouldered Connectors, 6 TPI to be used with T034 pt. -
TH-3004DD
10382-RS V-038, 2 TPF Rotary Shouldered Connectors, 4 TPI to be used with T072 pt. - with MRP Shoes
10551.5-RS V-055, 1.5 TPF Rotary Shouldered Connectors, 6 TPI to be used with T072 pt. -
10761.5-RS V-076, 1.5 TPF Rotary Shouldered Connectors, 4 TPI to be used with T044 pt. - TH-3012
Macaroni Tube
10H90-2 2” TPF H-90 Connection (90-V-050), 3.5 TPI to be used with T072 pt. -
10H90-3 3” TPF H-90 Connection (90-V-050), 3.5 TPI to be used with T072 pt. -
SL-H90 1¼" TPF, 3 TPI, 90-V-084 to be used with T072 pt. -
Thread Height Standards

LEAD GAGES
LG-5002
The lead gage inspects both internal and external thread leads using contact points that
seat in the threads of a part. Thread lead is the distance between threads, measured on a
plane parallel to the centerline of the threaded part. The pitch of the thread determines the
diameter of the contact points required for taking measurements.
The LG-5002 uses a two-point system to inspect thread lead for ACME, Stub ACME, UN, or
API threads. The two points allow for a sweeping action to obtain the measurement.
The LG-5003 uses the three-point system to inspect thread lead for ACME, Stub ACME, UN
threads, or API threads. Two fixed contact points at the rear of the gage and one moveable
contact point at the front of the gage provide complete stability when taking thread lead
measurements. This unique design does not require sweeping to obtain measurements.
Plus, contact points can be easily changed to allow the gage to be used on a variety of thread
forms.
Before inspecting parts, the lead gage must be preset to a nominal predetermined dimension
using a lead gage setting standard. These setting standards are manufactured according to
ANSI and API specifications. Lead standards are available for ACME, Stub ACME, UN and
API threads. API Spec 7 requires thread lead inspection.
Features
• Uses a three-point system for greater stability when inspecting parts (LG-5003).
• Uses interchangeable contact points to allow inspection on a variety of thread forms.
LG-5003
• Requires presetting using Gagemaker’s lead gage setting standards.
Model Description Minimum Bore Range

Lead Gage 2-point,
LG-5002 1.200 ½” - 4” Thread Length
Contact point spacing .500"
Lead Gage 2-point, .0001" grad.,
LG-5002-1 1.200 ½” - 4” Thread Length
Lead Gage 2-point,
LG-5002-J 1.200 ½” - 4” Thread Length
LG-5002-1J 1.200 ½” - 4” Thread Length
Lead Gage 3-point
LG-5003 1.340 ½” - 4” Thread Length
LG-5003-1 1.340 ½” - 4” Thread Length
Lead Gage 3-point, Contact
LG-5003-J 1.340 ½” - 4” Thread Length
point spacing .193"
LG-5003-1J 1.340 ½” - 4” Thread Length
LG-5003-L Special Load-to-Load pitch gage 1.500 ½” - 4” Thread Length
LG-5003-S Special Stab-to-Stab pitch gage 1.500 ½” - 4” Thread Length
LG-5003-L

LEAD GAGE SETTING STANDARDS
Gagemaker’s precision lead gage setting standards are manufactured in accordance with
API Spec 5B and 7-2. Lead gage standards are used to preset the lead gages contact point
location prior to the inspection of the threaded connector.
LG-5002 in
Last and First Position
Model Connection Type/Description TPF* TPI* Cross Ref.
API 8-Round Casing, Tubing & Drill Pipe,
LS-1001 ¾” 8 & 10 5691-A
All 10-Round Tubing
LS-1002 Straight Threads, 6 - 18 Pitch, 4” Length Straight 8 & 10 5691-C
LS-1003 11½” “V” API Line Pipe, American Std, NPT ¾” 11½ 5691-D Cumulative
LS-1004 Straight threads, Line pipe Straight 11½ 5691-F
LS-1005 API Buttress Casing, Internal/External 4½” - 13⅜” ¾” 5 5691-K Lead is measured in one inch intervals. As shown
LS-1006 API Buttress Casing, Internal/External 16” - Larger 1” 5 5691-K16 above, the cumulative lead interval is the total
measured distance from the first to the last thread.
6⅝” API Reg
4”, 5½”, & 6⅝” API Full Hole
2⅞”, 3½” - 5” Hughes Xtra Hole
LS-1007 2” 4 5691-L
2⅜”, 2⅞” - 4½” Hughes Slim Hole
2⅜” - 5½” API INT Flush
API Numbered Connectors #23-#50
5½”, 7⅝” - 8⅝” API Reg

LS-1008 3” 4 5691-M
API Numbered Connectors #56 - #77
2⅜” - 4½” API Reg

LS-1009 3” 5 5691-N
3½”, 4½” API Full Hole
API Numbered Connectors #10, #12, #13, #16
M.T. (Macaroni Tubing)
LS-1010 1½” 4 5691-T3
2⅜” - 3½” PAC
2⅜” - 4” American Open Hole
LS-1005
LS-1011 3½” - 6⅝” Hughes H-90 2” 3½ 5691-P4A Lead Gage Standard
LS-1012 7”- 8⅝” Hughes H-90 3” 3½ 5691-P4B
LS-1013 2 ⅜” - 3 ½” Slim Line H-90 1¼” 3 5691-P4C
LS-1027 - 1⅛” 5 -
LS-1032 - 1⅛” 6 - LS-1005
LS-5001
Straight Threads, 1-5 pitch, 4” length - - STD-5001
LS-5002
Straight Threads, 6-18 pitch, 4” length - - STD-5002
*TPF = Taper Per Foot, TPI = Threads Per Inch
STD-5001/LS-5001
Lead Gage Standard

INTERNAL PITCH DIAMETER INSPECTION GAGES

(1½” TO 27” DIAMETERS)
The ball pitch diameter gages or “NO GO” gages indicate the pitch diameter size of the
product’s internal balls to measure different pitch straight threads. All of the PD-6000 series
PD-6001 w/ are sold without contact points.
Extension
Model Description Travel Resolution Range
Rods
PD-6000 Internal Pitch Diameter Gage (“V” & ACME) ½" .0005" 1½” - 9”
PD-6000-02 Replacement Arm Set - - 2½” length
PD-6000-07 Replacement Arm Set - - 4½” length
PD-6001 Internal Pitch Diameter Gage ½" .0005" 6” - 24”
PD-6002 Internal Pitch Diameter Gage 2" .001" 9" - 27"
PD-6001 Replacement Parts (Extensions have #10-32 threads)
Model Description Length
PD-6001-PD4C Cap- CDI Indicator -
PD-6001-PD4M Cap- Mitutoyo Indicator -
PD-6000 PD-6001-PD3 Adjustment Cap Lock Nut -
PD-6001-PD2 Adjustment Cap -
PD-6001-PD1 Contact Point Adapter -
PD-6001-PDA Extension Rod .430”
PD-6001-PDB Extension Rod .860”
PD-6001-PDC Extension Rod 1.290”
PD-6001-PDD Extension Rod 1.720”
PD-6001-PDE Extension Rod 3.440”
PD-6001-PDF Extension Rod 5.590”
PD-6001-PDG Extension Rod 7.740”
PD-6001-PDH Extension Rod 10.320”
PD-6001-12E PD-6001 Internal Pitch Diameter Extension Rod 12”
INTERNAL TAPER GAGES

Gagemaker’s internal taper gages measure variation in connection taper. Taper gages are
IT-6000 shipped with our standard set of .072” diameter contact points, unless specified otherwise.
Refer to the contact point on pages 26 and 27 for the proper contact point for your particular
connection.
Model Description Cross Ref. Range

IT-6000 Internal Taper Gage 8191 4¼” Depth, 1½” - 9” Diameter
IT-6001 Internal Taper Gage 5554 Any Depth, 5” - 13⅜" API Sizes
IT-6001-VM Internal Taper Gage - Any Depth, 3½” Diameter
IT-6000 Replacement Parts
Model Description Length
IT-6000-07 Replacement Arm Set 4¼”
IT-6001 Replacement Parts (Extensions have #10-40 threads)*

Model Description Length Model Description Length
Extension rod,
IT-6001-01M Cap- Mitutoyo Indicator - IT-6001-12 3.643”
8⅝” Connection
Extension rod,
IT-6001-01C Cap- CDI Indicator - IT-6001-13 4.643”
9⅝” Connection
Extension rod,
IT-6001-04 Point Adapter .062” IT-6001-14 5.768”
10¾” Connection
Extension rod, Extension rod,
IT-6001-06 .200” IT-6001-15 6.768”
5” Connection 11¾” Connection
IT-6001-07 .523” IT-6001-16 8.393”
5½” Connection 13⅜” Connection
IT-6001-09 1.643” IT-6001-17 11.018"
6⅝” Connection 16” Connection
IT-6001 w/ Extension rod, Extension rod,
IT-6001-10 2.023” IT-6001-18 13.643"
Extension 7” Connection 18⅝” Connection
Rods Extension rod, Extension rod,
IT-6001-11 2.643” IT-6001-19 15.018"
7⅝” Connection 20" Connection
IT-6001-VM Replacement Parts
Model Description Minimum Bore
IT-6001-01-VM Short Cap 3.4275"

INTERNAL DIAMETER/GROOVE GAGES
Gagemaker’s internal diameter and groove gages measure variation in internal bore diameters. Diameter/
groove gages are shipped with .072” diameter contact points as standard. Refer to the contact point
chart for the proper contact point for your particular application.
Model Description Range PD-8001

IT-5104 Internal Diameter/Groove Gage 4” Depth, 1½” - 10” Dia.
Internal Diameter/Groove Gage points at
IT-5106-30 6” Depth, 1½” - 10” Dia.
30° angle
Internal Diameter/Groove Gage, points at
IT-5106-45 6” Depth, 1½” - 10” Dia.
45° angle
IT-5104-04 Replacement Lower Arm 4¼” Length
IT-5106-06 Replacement Lower Arm 6” Length
INTERNAL DEEP REACH BORE GAGES IT-5108

The DB series of gages are internal deep reach bore gages. Internal deep reach bore gages allow the
difficult measuring of pitch diameter deep inside a small diameter product. One set of contact points and
one set of PD-6001 Extension Rods (A-E) are included.
Model Description Range IT-5106

DB-1800 Internal Deep Reach Bore Gage 18" reach, min. bore 1.700”
DB-2400 Internal Deep Reach Bore Gage 24" reach, min. bore 1.700”
IT-5112
EXTERNAL PITCH DIAMETER INSPECTION GAGES
(0” TO 72” DIAMETERS)
The ball pitch diameter gages or “NO GO” gages indicate the pitch diameter size of the product’s external
thread. The gages are adjustable within a size range and use interchangeable contact points to measure
different pitch threads. Setting dimensions for the pitch diameter gages are provided by the TDWIN IT-5104
Thread Disk for Windows software package. The software is sold separately. Reference pages 26-27
for specific pitch contact points. Contact points are sold separately. Models PD-8004 through PD-
8016 includes a custom wood case.
DB-1800
PD-8001 External Ball Pitch Diameter Gage 0” - 6” (0 mm - 152.4 mm)
PD-8002 External Ball Pitch Diameter Gage 6” - 12” (152.4 mm - 304.8 mm)
PD-8006 External Ball Pitch Diameter Gage 16” - 20” (406.4 mm - 508 mm)
PD-8008 External Ball Pitch Diameter Gage 20” - 24” (508 mm - 609.6 mm)
PD-8010 External Ball Pitch Diameter Gage 24” - 28” (609.6 mm 711.2 mm) PD-8016
PD-8015 External Ball Pitch Diameter Gage 52” - 60” (1320.8 mm - 1524.0 mm) PD-8013
EXTERNAL TAPER GAGES

Gagemaker’s external taper gages inspect variation in connection taper. External taper gages are
shipped with .072” diameter contact points as standard. Refer to the contact point chart for the proper
contact point for your particular connection.
Model Description Cross Ref Range

ET-7001 External Taper, ½” travel 5637-J 0” - 6” ET-7002
ET-7002 External Taper, ½” travel 5637-D 0” - 10”
ET-7003 External Taper, 1” travel 5637-S 0” - 10”
ET-7004 External Taper, ½” travel 5538-J 0” - 16”
ET-7005 External Taper, 1” travel 5538-G 0” - 16”
ET-7006 External Taper, ½” travel 5538-U 16” - 24”
ET-7007 External Taper, 1” travel 5538-U 16” - 24”

CONTACT POINTS
Straight
Shank API CONTACT POINTS FOR LEAD AND TAPER GAGES
Contact Gagemaker’s standard ball contact points are manufactured with spherical carbide contact balls.
Points Both threaded and straight (non-threaded) shanks are available. All Gagemaker’s inspection
gages use threaded shank contact points. Threaded shanks are #4-48 UNF. Metric threads are
available upon request. Most gages require 2 contact points.
Model
Straight Threaded Point Threads
Connection Type
Shank Shank Diameter Per Inch
S235 T235 0.235” 3 Hughes Slim Line H-90
S200 T200 0.200” 3½ All Hughes H-90
S144 T144 0.144” 4 API Rotary Shouldered Connections
S128 T128 0.128” 4½ API Rotary Shouldered Connections
S105T T105T 0.105” 5½ Truncated for Extreme Line
S090 T090 0.090” 5 Buttress Casing – Taper
S072 T072 0.072” 8 API Tubing and Casing
S062 T062 0.062” 5 Buttress Casing – Lead
S057 T057 0.057” 10 API Tubing and Line Pipe
S050 T050 0.050” 11½ API Line Pipe
Rotary Shouldered Connection Thd.
- T044 0.044” 4
Depth Only
S041 T041 0.041” 14 API Line Pipe
T502
T503 Rotary Shouldered Connection Thd.
T501 - T034 0.034” 5
Depth Only
S03125 T03125 0.03125” 18 API Line Pipe
S021 T021 0.021” 27 API Line Pipe
CONTACT POINTS AND SPECIAL APPLICATION ACCESSORIES

Gagemaker continually develops new application contacts and indicator accessories. The following
items are in stock for immediate delivery. These contact points have #4-48 UNF threaded shank. All
contact points are carbide. Special and metric diameters are available, please call for quotation.
PA-45 RC-375 Model Ball Dia. Model Ball Dia. Model Ball Dia. Model Ball Dia.
T028 .028" T100 .100” T176 .176" T375 .375”
T043 .043" T116 .116 T188 .188” T430 .430"
T045 .045" T118 .118” T219 .219” T4375 .4375"
T059 .059" T125 .125” T250 .250” T475 .475"
T060* .060" T1335 .1335" T266 .266” T500 .500”
Blade
T500C E-Line Point TPD P-500 T068 .068" T150 .150" T295 .295" T531 .531”
T071 .071" T155 .155" T300 .300" T625 .625
T086 .086” T156* .156" T325 .325" T750 .750"
T087 .087” T157 .157" T344 .344”
T092 .092" T160 .160" T350 .350"
T098* .098" T165 .165” T360 .360"
*Straight Shanks available for T060, T098, T156
GENERAL PURPOSE POINTS AND ACCESSORIES

.300" .500" .750" 1.00" Model Description
T500C 50° Cone Contact Point, “V” Threads for TH-3001V, TH-3002V,TH-3004 Gages
T501 50° Cone Contact Point, Self-Centering for TH-3001R, TH-3002R Gages
T502 Self-Centering Sleeve for T501 & T503 Contact Points
T503 50° Cone Contact Point, “V” Threads for TH-3006
Contact Point E-Line .063” R Extreme Line Contact Point for TH-3003E Gage
Extensions TPD .020” R Contact Point for PD-3003 & PD-3004 Gages
PE-___ Point Extensions available in .300”, .500”, .750” & 1.00” (Ex. PE-300)
PA-45 45° Point Adapter
RC-375 .375” Diameter Roller Contact
P-500 TH-3001R Gage, Flat Face Contact
Blade-25 .008" thickness, .170" Diameter, .250" Depth Blade Point
Blade-50 .008" thickness, .170" Diameter, .500" Depth Blade Point

CONTACT POINTS (Continued)
UN SERIES (60° “V”) THREADS
These contacts points are used to inspect the pitch diameter of machined parts with 60° “V”
thread forms. Two are required per gage.
Truncated
Model Thread Pitch Model Thread Pitch Model Thread Pitch Contact Point
T562 1 T115 5 T050 11½ & 12
T288 2 T105 5½ T041 14 & 16
T188 3 & 3½ T096 6 T032 18
T144 4 T072 8
T128 4.5 T057 10
ACME OR STUB ACME THREADS

These truncated contact points are used to inspect the pitch diameter of machined parts with
29 ACME and Stub ACME thread forms. Two are required per gage.
Model Thread Pitch Model Thread Pitch Model Thread Pitch

T531T 1 T144T 3½ T062T 8
T344T 1½ T128T 4 T050T 10
T266T 2 T105T 5 T041T 12 & 14
T219T 2½ T090T 6&7 T032T 16
T188T 3 T072T 8
7° x 45° BUTTRESS SERIES CONTACT POINTS

These contact points are used to inspect the pitch diameter of machined parts with 7° x 45°
Buttress thread forms. Two are required per gage.
Model Thread Pitch Model Thread Pitch Model Thread Pitch

Various
T562 1 T188 3 T072 8 Contact
T437 1¼ T156 3½ T057 10 Points
T375 1½ T144 4 T050 12
T281 2 T115 5 T032 16 & 18
T219 2½ T096 6
TRAPEZOIDAL THREAD CONTACT POINTS

These contact points are used to inspect the millimeter pitch diameter of machined parts with
Trapezoidal thread forms. Two are required per gage.
Model mm Pitch Model mm Pitch

T144 7 T062 3
T125 6 T050 2½
T096 5 T041 2
T082 4 T032 1½
T072 3½
ISO METRIC SERIES CONTACT POINTS

These contact points are used to inspect the pitch diameter of machined parts with ISO
Metric 60° “V” thread forms. Two are required per gage.
Model mm Pitch Model mm Pitch

T096 4 T057 2½
T072 3 & 3½ T041 1½, 1¾, & 2

MRP-1000
MRP PITCH DIAMETER AND OVALITY GAGES
This MRP series of pitch diameter gages detects variations in pitch diameter by the use of a
gage shoe that rests on the crest of the threads. Variation in diameter is detected by the indicator
readout. These gages must be set to nominal size with one of a variety of setting options offered.
Refer to the setting option section that follows. Gage accuracy is +.001” throughout the range of
measurement. All of these gages are API approved for use on casing and tubing.*

MRP-202 MRP-202 Internal ¾ TPF Thread Gage Internal 1” - 2½”
MRP-1001
Internal 1½” - 4½”
MRP-1000 Internal Pitch Diameter Gage
External 1½” - 4½”
MRP-1001 External Pitch Diameter Gage, 4¼” reach External 1½” - 4½”
Internal Seal Diameter Gage. Contacts on a 45° angle.
MRP-1000-45 Internal 1” - 4½”
⅜" upper arms, ⅜" lower arms
MRP-1007 Internal 1½” - 4½”
MRP-1012-TST Arms- .740" upper, ½" lower
MRP-1008 Internal 1⅜” - 4½”
Arms- .740" upper, .740" lower
MRP-1012-TSS Internal Seal Diameter Gage. Contacts on a 45° angle.
MRP-1009 Internal 1⅜” - 4½”
with contact points Arms- .740" upper, .500" lower
Internal/External Pitch Diameter Gage for Two Step Seal.
Internal 2⅛” - 4½”
MRP-1012-TSS Upper and lower arms are .740" diameter. Upper arm has
standard travel of .150". Shipped with T105 pts.
Internal/External Pitch Diameter Gage, Two Step
Thread, w/ 1.030" Horseshoe stnadoff for front and Internal 1½” - 4½”
MRP-1012-TST
rear measurements. Upper and lower arms have .740" External 1½” - 4½”
diameter. Upper arm has extended travel of .350"
MRP-2001
Internal 1½” - 4½”
MRP-1500 Internal/External Pitch Diameter Gage, Solid Body
MRP-2001 External Pitch Diameter Gage, 4½” reach
MRP-2001-S External Pitch Diameter Gage, 4½” reach, Straight Arms
External 2⅜” - 20”
MRP-2001-7 External Pitch Diameter Gage, 7” reach
MRP-2002 Internal Pitch Diameter Gage, 4¼” reach
MRP-2002-S Internal Pitch Diameter Gage, 4¼” reach, Straight Arms
Internal 2⅜” - 20”
MRP-2002 MRP-2002-7 Internal Pitch Diameter Gage, 7” reach
MRP-2002-10 Internal Pitch Diameter Gage, 10” reach
MRP-2003 Internal/External Pitch Diameter Gage, 4¼” reach
MRP-2003-S Internal/External Pitch Diameter Gage, 4¼” reach, Straight Arms Internal 2 ⅜” - 20”
MRP-2003-7 Internal/External Pitch Diameter Gage, 7” reach External 2⅜” - 20”
MRP-2003-10 Internal/External Pitch Diameter Gage, 10” reach
MRP-2511 MRP-2511 External Pitch Diameter Gage, 4” reach
External 4½” - 9⅝”
MRP-2521 External Pitch Diameter Gage, 4” reach External 4½” - 13⅜”
MRP-2512 Internal Pitch Diameter Gage, 3⅜” reach
MRP-2512-7 Internal Pitch Diameter Gage, 7” reach Internal 4½” - 9⅝”
MRP-2512
MRP-2512-10 Internal Pitch Diameter Gage, 10” reach
MRP-2522 Internal Pitch Diameter Gage, 3⅜” reach Internal 4½” - 13⅜”
MRP-2513 Internal/External PD Gage, 3⅜” reach 4½” - 9⅝”
MRP-2523 Internal/External PD Gage, 3⅜” reach 4½” - 13⅜”
MRP-3001 External Pitch Diameter Gage, 3⅜” reach External 8⅝” - 24”
MRP-3002 Internal Pitch Diameter Gage, 3⅜” reach Internal 8⅝” - 24”
Internal 8⅝” - 24”
MRP-3003 Internal/External Pitch Diameter Gage, 3⅜” reach
MRP-3001 External 8⅝” - 24”
Internal 20” - 36”
MRP-3004 Internal/External Pitch Diameter Gage, 3⅜” reach
External 20” - 36”
MRP-3501 External Pitch Diameter Gage, w/ 6¼” reach External 8⅝” - 20”
MRP-3502 Internal Pitch Diameter Gage, w/ 6¼” reach Internal 8⅝” - 20”
MRP-3002 Internal 8⅝” - 20”
MRP-3503 Internal/External PD Gage, w/ 6¼” reach
External 8⅝” - 20”
*Voted in by API in 2008

MRP REPLACEMENT PARTS MRP-20BL MRP-10BL
These are some of the most commonly requested replacement parts for the MRP gages.
Contact Gagemaker for parts not listed.
Model Description
MRP-10BL MRP-1000 Block Set
X
MRP-10UA MRP-1000 Upper Arm
PE
0W
MRP-10LA MRP-1000 Lower Arm
3
P-
MR
MRP-10SLA MRP-1000 Special Arm 1” longer
MRP-20WP-7
MRP-10WP MRP-1000 Wear Pad Set P
W
-20
MRP-10SP MRP-1000 Spring Plunger RP
M
MRP-20BL MRP-2000 Block Set MRP-10WP
MRP-20LB-1 MRP-2000 Lower Block w/ 1” hole
MRP-21UA MRP-2001 Upper Arm 0UA
P-1
MR
0LA
MRP-21UA-7 MRP-2001 7” Upper Arm P-1
MR
MRP-21LA-7 MRP-2001 7” Lower Arm
MRP-21UA-10 MRP-2001 10” Upper Arm 2UA
P-2
MR
MRP-21LA-10 MRP-2001 10” Lower Arm
MRP-.625I Int. Thread Shoe, ⅝” long, .125 Pivot Dimension
MRP-.625E Ext. Thread Shoe, ⅝” long, .250 Pivot Dimension 2LA
P-2
MR
MRP-20mm Int./Ext. Thread Shoe, 20 mm long, .250 Pivot Dimension
A
MRP-20SP MRP-2000 Spring Plunger
P- 21U
MRP-22UA MRP-2002 Upper Arm MR
1LA
MR
MRP-22LA-7 MRP-2002 7” Lower Arm -7
2 UA
MR -7
MRP-22LA-10 MRP-2002 10” Lower Arm -21LA
M RP
MRP-20WP MRP-2000 Wear Pad Set 7,
2LA-
MRP-20WPEX MRP-2000 Extended Wear Pad Set P-2
MR
MRP-20WP-7 MRP-2000 Wear Pad Set, 7” reach
MRP-20WP-10 MRP-2000 Wear Pad Set, 10” reach
MRP-20KB
MRP-RAIL-12 MRP-2000 12” Cross Rail
MRP-10KB-L
MRP-10KB-S
MRP-10KB-S MRP-1000 Knob-Short
MRP-10KB-L MRP-1000 Knob-Long
MRP-20KB MRP-2000 Knob MRP-RAIL-24 MRP-.625I MRP-.625E
MRP-.875 Int./Ext. Thread Shoe, ⅞” long, .250 Pivot Dimension
MRP-1.00 Int./Ext. Thread Shoe, 1” long, .250 Pivot Dimension
MRP-30WP MRP-3000 Wear Pad Set
MRP-RAIL-18
MRP-30WPEX MRP-3000 Extended Wear Pad Set
MRP-.875 MRP-1.00
MRP-30RS-18 MRP-3000 Rail Set, 18” Max
MRP-30RS-24 MRP-3000 Rail Set, 24” Max
MRP-GSS MRP Gage Setting Stand
MRP-GSS
MRP-RAIL-12

MRP-5000 FUNCTIONAL ROLL GAGES FOR TAPERED THREADS

The MRP-5000 series of thread pitch diameter gages use hardened and ground thread
MRP-5001
U.S. Patent No.
rolls to inspect functional size of tapered threaded connectors. The MRP-5000 gages are
5,182,862 adjustable within a size range and have interchangeable thread rolls for inspection of all API
thread forms. The gages must be preset to size using one of a variety of setting methods
available. Refer to the setting options that follow. Please specify preferred taper arms when
ordering. Thread rolls are sold separately.
Model Description Resolution Range

MRP-501* External Sizes by Taper, Single Taper Gage* .0001" 1" - 2¼"
MRP-502* Internal Sizes by Taper, Single Taper Gage* .0001" 1" - 2¼"
MRP-5001 Internal/External Tubing and Casing Connectors .0005" 2⅜" - 5½"
MRP-5002 Internal/External Tubing and Casing Connectors .0005" 2⅜" - 13⅜"
MRP-5003 Internal/External Tubing and Casing Connectors .0005" 13⅜" - 20"
Internal/External Tubing and Casing Connectors
MRP-5004 .0001" 2⅜" - 9⅝"
and Internal Tool Joints
*Please specify taper when ordering. Built to one specific taper. One taper per gage. Set of thread rolls included.
REPLACEMENT PARTS
Model Description*
MRP5-10 Positioning Springs (Set of 2)
MRP-5001
Side View MRP5-11 Retainer Washers (Set of 2)
MRP5-12 Lock Screws (Set of 2)
MRP5-75T ¾" TPF Taper Arms (Set of 2)
MRP5-10T 1" TPF Taper Arms (Set of 2)
MRP5-125T 1¼” TPF Taper Arms (Set of 2)
MRP5-15T 1½" TPF Taper Arms (Set of 2)
*Taper arm price does not include thread rolls. To determine the thread rolls required,
refer to thread roll chart below.
MRP-5000 THREAD ROLLS

MRP-5000 The product thread form determines the thread roll set that will be used. Thread roll sets
Taper Arm consist of 2 rolls supplied in a labeled storage tube.
Model Description
TR-8R All API 8 Round Tubing
TR-10R All API 10 Round Tubing
TR-8LP 8V API Line Pipe, American Standard NPT
TR-11LP 11½” V API Line Pipe, American Standard NPT
TR-B10I API Buttress Casing, Internal, 16” - 20”
MRP-501
TR-B10E API Buttress Casing, External, 16” - 20”
TR-B75I API Buttress Casing, Internal, 4½” - 13⅜”
TR-B75E API Buttress Casing, External, 4½” - 13⅜”
TR-41576 P.A.C. Connections, 2⅜” - 3½”, 2⅜” - 4” American Open Hole
4”, 5½”, & 6⅝” API Full Hole 2⅜” - 6⅝” API INT Flush
2⅞” - 5” Hughes Xtra Hole API Numbered Connections #23 - #50
TR-4238
2⅜” - 4½” Hughes Slim Hole 3½" - 5½" Double Streamline
3½" & 4½" API EXT Flush 6⅝” API REG
TR-4338 5½”, 7⅝”, 8⅝” API REG , API Numbered Connections #56 - #77
TR-5340 2⅜” - 4½” API REG, 3½”, 4½” API Full Hole
TR-6232 2⅜" & 2⅞" External Flush
TR-61555 API Numbered Connections #10, #12, #13, #16 M.T. (Macaroni Tubing)
TR-352H9 3 ½” - 6⅝” Hughes H-90
TR-353H9 7” - 8⅝” Hughes H-90
TR-312SLH9 2⅜” - 3½” Hughes Slim Line
TR-BL Blank thread roll set

MRP-5500 FUNCTIONAL ROLL GAGES FOR TAPERED THREADS
The MRP-5500 gage is for rotary shouldered connections. The MRP-5500 series of thread
Using the
pitch diameter gages use hardened and ground thread rolls to inspect functional size of
MRP-5501
tapered threaded connectors. The MRP-5500 gages are adjustable within a size range and
have interchangeable thread rolls for inspection of all API thread forms. The gages must
be preset to size using one of a variety of setting methods available. Refer to the setting
options that follow. Please specify preferred taper arms when ordering. Thread rolls are
sold separately.
Model Description Resolution Range

MRP-5501 External Tool Joints .0001" 2⅜” - 5½”
MRP-5502 External Tool Joints .0001" 5½” - 7⅝”
MRP-5503 External Tool Joints .0001" 8⅝”
MRP-5012 Internal Tunneling Drill Pipe .0001" ¾” - 2”
External Tunneling Drill Pipe
(Please specify taper when ordering.
MRP-5512 .0001" ¾” - 2”
Built to one specifc taper. One taper
per gage.)
REPLACEMENT PARTS
Model Description*
MRP55-125T 1¼” TPF Taper Arms (Set of 2)
MRP55-15T 1½” TPF Taper Arms (Set of 2)
MRP55-20T 2” TPF Taper Arms (Set of 2)
MRP55-30T 3” TPF Taper Arms (Set of 2)
*Taper arm price does not include thread rolls. To determine the thread rolls
required, refer to thread roll chart below.
U.S. Patent No.
5,182,862
MRP-5500 THREAD ROLLS
MRP-5501
The product thread form determines the thread roll set that will be used. Thread roll sets
consist of 2 rolls supplied in a labeled storage tube.
Model Description
TR-41576 P.A.C. Connections, 2⅜” - 3½”, 2⅜” - 4½” American Open Hole
4”, 5½”, & 6⅝” API Full Hole 2⅜” - 6⅝” API INT Flush
2⅞” - 5” Hughes Xtra Hole API Numbered Connections #23 - #50
TR-4238
2⅜” - 4½” Hughes Slim Hole 3½" - 5½" Double Streamline
3½" & 4½" API EXT Flush 6⅝” API REG
TR-4338 5½”, 7⅝”, 8⅝” API REG, API Numbered Connections #56 - #77
TR-5340 2⅜” - 4½” API REG, 3½” & 4½” API Full Hole
TR-6232 2⅜” & 2⅞” External Flush
TR-61555 API Numbered Connections #10, #12, #13, #16 M.T. (Macaroni Tubing)
TR-352H9 3 ½” - 6⅝” Hughes H-90 MRP-5500
Taper Arm
TR-353H9 7” - 8⅝” Hughes H-90
TR-312SLH9 2⅜” - 3½” Hughes Slim Line
TR-BL Blank thread roll set

MRP Pin External

GAGE SETTING MASTERS
Rod Standard
ROD STYLE SETTING STANDARDS FOR MRP-1000, 1500, 2000, 2500, 3000,
& 3500 ONLY
Rod style setting standards are designed to preset all models of the MRP Series gages
for accurate inspection of API threaded connections. Each set of standards consists of two
precision ground rods that are ground to lengths in accordance with API Spec 5B. The rod
sets are securely attached together and labeled with the connection size and serial number.
The rods set the axial location of the thread shoe and the distance between shoes for accurate
inspection of threaded connectors.
Thread Type Connection Pin Standard Model Box Standard Model

NUE 2⅜” NUE MRP-238NUE-P MRP-238NUE-B
2⅞” NUE MRP-278NUE-P MRP-278NUE-B
3½” NUE MRP-312NUE-P MRP-312NUE-B
4” NUE MRP-4NUE-P MRP-4NUE-B
MRP-2001 on 4½” NUE MRP-412NUE-P MRP-412NUE-B
External Rod EUE 2⅜” EUE MRP-238EUE-P MRP-238EUE-B
Standard 2⅞” EUE MRP-278EUE-P MRP-278EUE-B
3½” EUE MRP-312EUE-P MRP-312EUE-B
4” EUE MRP-4EUE-P MRP-4EUE-B
4½” EUE MRP-412EUE-P MRP-412EUE-B
Buttress 4½” Buttress MRP-412B-P MRP-412B-B
5” Buttress MRP-5B-P MRP-5B-B
5½” Buttress MRP-512B-P MRP-512B-B
6⅝” Buttress MRP-658B-P MRP-658B-B
10¾” Buttress MRP-1034B-P MRP-1034B-B
11¾” Buttress MRP-1134B-P MRP-1134B-B
13⅜” Buttress MRP-1338B-P MRP-1338B-B
MRP Pin Internal
Rod Standard
LTC 4½” 8R LTC MRP-412L-P MRP-412L-B
5” 8R LTC MRP-5L-P MRP-5L-B
5½” 8R LTC MRP-512L-P MRP-512L-B
6⅝” 8R LTC MRP-658L-P MRP-658L-B
MRP-958L-B+P110 or
9⅝” 8R LTC MRP-958L-P
MRP-958L-B-P110
STC 4½” - 9.50# 8R STC MRP-412S-9-P MRP-412S-9-B
MRP-2002 on 4½” - Other 8R STC MRP-412S-O-P MRP-412S-O-B
Internal 5” - 11.50# 8R STC MRP-5S-11-P MRP-5S-11-B
Rod Standard 5” - Other 8R STC MRP-5S-O-P MRP-5S-O-B
5½” 8R STC MRP-512S-P MRP-512S-B
6⅝” 8R STC MRP-658S-P MRP-658S-B
7” - 17.00# 8R STC MRP-7S-17-P MRP-7S-17-B
7” - Other 8R STC MRP-7S-O-P MRP-7S-O-B
8⅝” - 24.00# 8R STC MRP-858S-24-P MRP-858S-24-B
8⅝” - Other 8R STC MRP-858S-O-P MRP-858S-O-B
10¾” - 32.75# 8R STC MRP-1034S-32-P MRP-1034S-32-B
10¾” - Other 8R STC MRP-1034S-O-P MRP-1034S-O-B
11¾” 8R STC MRP-1134S-P MRP-1134S-B
13⅜” 8R STC MRP-1338S-P MRP-1338S-B
16” 8R STC MRP-16S-P MRP-16S-B
20” 8R STC MRP-20S-P MRP-20S-B
All Special Orders, Non-Standard API or Premium Connection Setting Standards are Extra

FRAME STYLE SETTING STANDARDS FOR MRP-1000, 1500, 2000,
2500, 3000, & 3500 SERIES
Frame Style
The frame style setting standards are designed to preset all models of the MRP Series Standards
gages for accurate inspection of API threaded connections. These standards consist of a
rigid, non-adjustable steel block precision machined to proper size to tolerances of ±.0003”.
Round style standards, smaller than 2⅜", are available as specials (contact directly for more
information).
FRAME STYLE SETTING STANDARDS*

Thread Type Connection Pin Standard Model Box Standard Model
NUE 2⅜” NUE FSTD-238N-P FSTD-238N-B
2⅞” NUE FSTD-278N-P FSTD-278N-B
3½” NUE FSTD-312N-P FSTD-312N-B
4½” NUE FSTD-412N-P FSTD-412N-B
EUE 2⅜” EUE FSTD-238E-P FSTD-238E-B
2⅞” EUE FSTD-278E-P FSTD-278E-B
3½” EUE FSTD-312E-P FSTD-312E-B
4½” EUE FSTD-412E-P FSTD-412E-B
Buttress 4½” Buttress FSTD-412B-P FSTD-412B-B
5” Buttress FSTD-5B-P FSTD-5B-B
5½” Buttress FSTD-512B-P FSTD-512B-B
MRP-2001 on a
6⅝” Buttress FSTD-658B-P FSTD-658B-B
Frame Style
7” Buttress FSTD-7B-P FSTD-7B-B Standard
8⅝” Buttress FSTD-858B-P FSTD-858B -B
10¾” Buttress FSTD-1034B-P FSTD-1034B-B
11¾” Buttress FSTD-1134B -P FSTD-1134B-B
13⅜” Buttress FSTD-1338B-P FSTD-1338B-B
LTC 4½” 8R LTC FSTD-412L-P FSTD-412L-B
5” 8R LTC FSTD-5L-P FSTD-5L-B MRP-2002 on a
Frame Style
5½” 8R LTC FSTD-512L-P FSTD-512L-B
Standard
6⅝” 8R LTC FSTD-658L-P FSTD-658L-B
7” 8R LTC FSTD-7L-P FSTD-7L-B
FSTD-958L-B+P110 or
9⅝” 8R LTC FSTD-958L-P
FSTD-958L-B-P110
20” 8R LTC FSTD-20L-P FSTD-20L-B
STC 4½” - 9.50# 8R STC FSTD-412S-9-P FSTD-412S-9-B
4½” - Other 8R STC FSTD-412S-O-P FSTD-412SS-O-B
5” - 11.50# 8R STC FSTD-5S-11-P FSTD-5S-O-B
5” - Other 8R STC FSTD-5S-O-P FSTD-5S-O-B
5½” 8R STC FSTD-512S-P FSTD-512S-B
6⅝” 8R STC FSTD-658S-P FSTD-658S-B Round Style
7” - 17.00# 8R STC FSTD-7S-17-P FSTD-7S-17-B Standards
(Smaller than
7” - Other 8R STC FSTD-7S-O-P FSTD-7S-O-B
2⅜")
7⅝” 8R STC FSTD-758S-P FSTD-758S-B
8⅝”- 24.00# 8R STC FSTD-858S-24-P FSTD-858S-24-B
8⅝” - Other 8R STC FSTD-858S-O-P FSTD-858S-O-B
MRP-1000 on a
10¾”- 32.75# 8R STC FSTD-1034-32-P FSTD-1034-32-B Round Style
10¾”- Other 8R STC FSTD-1034S-O-P FSTD-1034S-O-B Standard
11¾” 8R STC FSTD-1134S-P FSTD-1134S -B
13⅜” 8R STC FSTD-1338S-P FSTD-1338S-B
16” 8R STC FSTD-16S-P FSTD-16S-B
20” 8R STC FSTD-20S-P FSTD-20S-B
*Special Orders, Non Standard API, Round or Premium Connection Setting Standards are Available

FRAME STYLE SETTTING STANDARDS FOR ROTARY SHOULDERED

CONNECTIONS
SETTING STANDARDS FOR MRP-5000 AND MRP-5500 SERIES
MRP-5501
on a Frame Thread Type Connection Pin Standard Model Box Standard Model
Style P.A.C. Connections 2⅜” FSTD-238PAC-P FSTD-238PAC-B
Standard
2⅞" FSTD-278PAC-P FSTD-278PAC-B
for RSC
API Full Hole 3½" FSTD-312FH-P FSTD-312FH-B
4" FSTD-4FH-P FSTD-4FH-B
4½" FSTD-412FH-P FSTD-412FH-B
5½" FSTD-512FH-P FSTD-512FH-B
6⅝” FSTD-658FH-P FSTD-658FH-B
Hughes Extra Hole 3½" FSTD-312EH-P FSTD-312EH-B
4½" FSTD-412EH-P FSTD-412EH-B
5" FSTD-5EH-P FSTD-5EH-B
MRP-5002
Hughes Slim Hole 2⅜” FSTD-238SH-P FSTD-238SH-B
on a Frame
2⅞" FSTD-278SH-P FSTD-278SH-B
Style
Standard 3½" FSTD-312SH-P FSTD-312SH-B
for RSC 4" FSTD-4SH-P FSTD-4SH-B
4½" FSTD-412SH-P FSTD-412SH-B
API Internal Flush 2⅜” FSTD-238IF-P FSTD-238IF-B
2⅞" FSTD-278IF-P FSTD-278IF-B
3½" FSTD-312IF-P FSTD-312IF-B
4" FSTD-4IF-P FSTD-4IF-B
6⅝” FSTD-658IF-P FSTD-658IF-B
API Regular 2⅜” FSTD-238REG-P FSTD-238REG-B
2⅞" FSTD-278REG-P FSTD-278REG-B
3½" FSTD-312REG-P FSTD-312REG-B
4½" FSTD-412REG-P FSTD-412REG-B
Frame Style Standards 5½" FSTD-512REG-P FSTD-512REG-B
for 6⅝” FSTD-658REG-P FSTD-658REG-B
Rotary Shouldered 7⅝” FSTD-758REG-P FSTD-758REG-B
Connections (RSC)
8⅝” FSTD-858REG-P FSTD-858REG-B
API No. Connections #23 FSTD-23NC-P FSTD-23NC-B
#26 FSTD-26 NC-P FSTD-26 NC-B
#31 FSTD-31NC-P FSTD-31NC-B
#61 FSTD-61C-P FSTD-61C-B
Hughes Slim Line H-90 2⅜” FSTD-238SL-P FSTD-238SL-B
2⅞" FSTD-278SL-P FSTD-278SL-B
3½" FSTD-312SL-P FSTD-312SL-B
Hughes H-90 3½" FSTD-312H90-P FSTD-312H90-B
4" FSTD-4H90-P FSTD-4H90-B
4½" FSTD-412H90-P FSTD-412H90-B
5½" FSTD-512H90-P FSTD-512H90-B
6⅝” FSTD-658H90-P FSTD-658H90-B
7⅝” FSTD-758H90-P FSTD-758H90-B
8⅝” FSTD-858H90-P FSTD-858H90-B


Gagemaker-Thread-Measurement FERST

Uploaded by

Copyright:

Available Formats

Gagemaker-Thread-Measurement FERST

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Gagemaker-Thread-Measurement FERST

Uploaded by

Copyright:

Available Formats

Prices subject to change without notice 09/08 13

When meeting engineering specifications,

Gagemaker thread diameter gages inspect

During inspection of parts, our functional

Our unrivalled pitch diameter gages use

P.O. Box 87709, Houston, Texas 77287-7709

EXTERNAL FUNCTIONAL PD THREAD INSPECTION GAGES

Model Description Range

INTERNAL FUNCTIONAL PD THREAD INSPECTION GAGES

DEEP BORE INTERNAL THREAD GAGE

Model Description Range

P.O. Box 87709, Houston, Texas 77287-7709

ISO METRIC SERIES THREAD ROLLS (For gages on previous page)

THREAD DIAMETER (1½” & Larger)

TRAPEZOIDAL THREAD ROLLS (For gages on previous page)

THREAD DIAMETER (38.1 mm & Larger)

P.O. Box 87709, Houston, Texas 77287-7709

SMALLER DIAMETER THREAD INSPECTION GAGES

Model Description Range

UN SERIES THREAD ROLLS

ISO METRIC THREAD ROLLS

INTERNAL THREAD DIAMETERS

P.O. Box 87709, Houston, Texas 77287-7709

PITCH DIAMETER CONTACT POINTS (For gage on page 16)

P.O. Box 87709, Houston, Texas 77287-7709

THREAD PROFILE AND SPECIAL GROOVE PROFILE GAGES

BX - Dog Bone Paddle Gage

BX - Groove Profile & Width Go/NoGo Gage

P.O. Box 87709, Houston, Texas 77287-7709

TAPERED INSERT IDENTIFIERS TP-RTC-8R

TAPERED THREAD PROFILE GAGES TP-935-3-JSS

P.O. Box 87709, Houston, Texas 77287-7709

PIT DEPTH GAGES

Model Description Range Cross Ref.

PD-3005 EXTERNAL THREAD HEIGHT GAGES

External Thread Height,

TH-3001PD Now is the TH-3001V Same as TH-3001V - - -

External Thread Height,

P.O. Box 87709, Houston, Texas 77287-7709

THREAD HEIGHT GAGE STANDARDS

Model Description Cross Ref.

Thread Height Standards

P.O. Box 87709, Houston, Texas 77287-7709

Model Description Minimum Bore Range

P.O. Box 87709, Houston, Texas 77287-7709

5½”, 7⅝” - 8⅝” API Reg

2⅜” - 4½” API Reg

*TPF = Taper Per Foot, TPI = Threads Per Inch

P.O. Box 87709, Houston, Texas 77287-7709

INTERNAL PITCH DIAMETER INSPECTION GAGES

INTERNAL TAPER GAGES

Model Description Cross Ref. Range

IT-6001 Replacement Parts (Extensions have #10-40 threads)*

P.O. Box 87709, Houston, Texas 77287-7709

Model Description Range PD-8001

INTERNAL DEEP REACH BORE GAGES IT-5108

Model Description Range IT-5106

EXTERNAL TAPER GAGES

Model Description Cross Ref Range