VAM Must Sumitomo 1209 PDF
VAM Must Sumitomo 1209 PDF
VAM Must Sumitomo 1209 PDF
VAM ® 21
VAM ® TOP
VAM ® TOP HC
VAM ® TOP HT
VAM ® SLIJ II
VAM ® FJL
VAM ® HTF
DINO VAM ®
BIG OMEGA TM
VAM ® TOP FE
VAM ® HW ST
VAM ® MUST
External seal geometry
Thread form
Ø 7 5/8˝ – 5 TPI
Ø 10 3/4˝ – 5 TPI
Taper 10%
BENEFITS
Connection Yield Strengths are calculated from the minimum specified material yield stress and the critical joint cross sectional area, pipe or coupling as, appropriate.
Pipe Connection
Joint Connection Yield External pressure Minimum Internal Yield Size
Size Nominal Plain I.D. No- Drift Pin Joint
End
Weight Weight Wall Thickness Dia- Pin I.D.
Length C.C.S.* tensile Strength (1000 lb.) (psi)** Pressure (psi)** (OD)
(OD) minal meter Efficiency
Inch 80 95 110 80 95 110 80 95 110 Inch
mm lb./ft. lb./ft inch mm Inch Inch Inch Inch sq. in. % ksi ksi ksi ksi ksi ksi ksi ksi ksi mm
7 5/8 55.30 55.07 0.750 19.05 6.125 6.000 6.315 5.294 9.153 P 57 732 870 1007 14190 16850 19510 13770 16350 18930 7 5/8
193.68 59.20 59.08 0.812 20.62 6.001 5.876 6.201 5.857 10.029 P 58 802 953 1103 15220 18080 20930 14910 17700 20500 193.68
10 3/4 10 3/4
109.00 107.20 1.033 26.24 8.684 8.528 8.937 6.289 17.723 P 56 1418 1684 1950 13900 16500 19110 13450 15980 18500
273.05 273.05
* Joint C. C. S. = Joint Critical Cross Section 1000 lb = 4.44822 Kn ** External pressure equal to collapse pressure
P= Pin 1 ksi = 1000 psi calculated from API Bul. 5 C 3 Section 1. Minimum
1 psi = 0.006895 Mpa Internal Yield Pressure are calculated
0.06895 bar from API Bul 5C 3 section 3, formula 3.1.1.
DINO VAM ®
A cost effectiveT&C connection for surface and intermediate
casing applications. Increased running reliability and redu-
ced rig costs result from its deep stabbing, non cross-threa-
ding and fast make-up. Sealing and structural strength are
provided by a coarse 3 TPI tapered, hooked thread design.