Special M & P Conditions
Special M & P Conditions
Special M & P Conditions
HEMRAJ MEENA
LATHA
Date: 2019.10.01
2018.02.21
Date: 2018.05.15
15:06:30
11:45:10 IST
17:59:54 IST
Reason: IREPS
Reason: IREPS
Document
Document
Location:IREPS-CRIS
Location: IREPS-CRIS
The tenderers shall give para/clause wise comments on the technical specification to
indicate whether the equipment offered fully meets the tender specifications. The offer
shall be accompanied with complete details of technical parameters/brochure/pamphlets
for quoted equipment with model number, if any.
In case the tenderer is an agent of the manufacturer, such tenderer should clearly
indicate the same and also enclose authorization certificate from the manufacturer to this
effect (specific to the tender) and also mention the place where the equipment will be
offered for pre-inspection before dispatch.
10.3 Validity
The offer should be kept valid for 120 days from the date of opening of the tender.
The tenderers should confirm that they will render quick after sales service during the
warranty period of the machine and advise details of their after sales network / office
which will render the said service.
i. Cost of preventive maintenance visits during the year (Two visits in each year.
Detailed itemized breakup of jobs to be done in each visit shall be furnished in
the offer).
ii. Cost of all spares required for preventive maintenance.
iii. Cost of breakdown Maintenance visits during the year.
iv. Cost of all spares required for Breakdown Maintenance.
v. Boarding, lodging, transportation, medical facilities and all other incidental
expenses.
vi. All duties, taxes and levies applicable.
However, the cost of consumables required for day-to-day operation would not be
included in the scope of CMC.
The CMC prices for each year will be firm. The CMC charges shall be separately
payable in Indian Rupees only. Railways reserve the right for entering into
Comprehensive Annual Maintenance Contract (CMC) on the basis of rates quoted by
the Contractor in their tender against CMC charges.
CMC is mandatory for Medical Equipment. Therefore, offer of tenderers not quoting
CMC charges for medical equipment shall be summarily rejected.
For all other M&Ps, the essentiality of CMC (whether CMC required or not) is clearly
indicated in schedule or requirement. However, in any case, Tenders shall quote CMC
charges for 5 years for all other M&Ps, even for the purpose of future
reference/guidance of the consignee.
(i) For Medical Equipment (CMC requirement is mandatory) and for all other M&Ps
where CMC requirement has been clearly indicated in schedule of requirement:-
Total Net Present Value of CMC charges for 5 years (P) after expiry of warranty
period of two years calculated on predetermined % rate of discounting (RD) is
mentioned in Annexure- 1. In case of different warranty period & different span of
CMC Charges this formula will be as per the equivalent suitable calculations. The
same shall be loaded on FOR destination rate including cost of installation &
commissioning charges quoted by the tenderer for the purpose of comparative
evaluation of offers (inter-se ranking).
(ii) For all other M&Ps where CMC is not required and indicated in schedule of
requirement, but the same may be used for future reference of the consignee:-
CMC charges shall not be loaded and only FOR destination rate including cost of
installation & commissioning charges quoted by the tenderer shall be the criterion for
comparative evaluation of offers.
(c) The CMC shall guarantee 98% availability (minimum Uptime) in case of Medical
Equipment or indicated in schedule of requirement for other M&Ps, which shall be
calculated on a quarterly basis on the total or working days available in the quarter.
Availability shall be defined as full functionality of the machine to fulfill all requirements
specified in the specification.
(d) The Maintenance shall normally be done during working hours i.e. from 10:00AM to
5:00PM. However, in case of emergency, maintenance may have to be done beyond
working hours and even on holidays. Prior arrangements through proper communication
should be worked out in all cases by the Contractor.
(e) The Equipment shall be considered under breakdown, if any of the requirements
specified in the specification is not fulfilled. In case of medical Equipments, all
breakdowns must be attended within 48hours of intimation by the consignee in writing
(Maximum Response time). No breakdown shall stretch beyond three days
consecutively (Maximum down time). The Contractor, in case of Medical Equipment,
any provide standby Equipment in case Equipment could not be put in order within three
days. The maximum response time and maximum down time for other M&Ps are
indicated in schedule of requirement.
(f) A penalty of 0.25% of the CMC value shall be levied for each percentage point shortfall.
However, total penalty in a year shall not exceed 10% of the CMC value. In case, the
total penalty exceeds 10% Railways shall have the right to cancel the CMC and forfeit
the performance guarantee bond towards CMC.
(g) Payment of CMC shall be made on quarterly basis against a performance guarantee
bond equal to full value of the annual contract value, valid for 15 Months from date of
CMC, to be furnished by the contractor at the beginning of CMC. Payment shall be made
at the end of the quarter.Penalties imposed during quarter shall be deducted from the
quarterly payment due to the Contractor.
(h) After each preventive maintenance and breakdown visit, the performance of the
machine/Equipment shall be monitored for two days after which joint note shall be
signed between the Contractor or his authorized officials and the consignee. The joint
note shall clearly bring out the performance of the machine/Equipment to fulfill the
requirements in the specification.
(i) The Contractor shall execute the contract in conformance to all applicable laws of
the land. The consignee shall not be liable in any way for any penalties, claims
and charges arising out of the execution of contract by the Contractor. For all
such expenses and liabilities, the Contractor shall be solely responsible. This
shall also include any compensation claims arising out of any accident during
execution of the contract.
(j) The Contractor shall also be solely responsible for any damages suffered
by the consignee’s property during execution of the contract. However,
the liability shall be limited to making good the damages inflicted.
(k) The tenderers are required to give the current cost of spares required for
maintenance of machine and the current service charges for each item of work of
repair of M&P to undertake maintenance work of the equipment by consignee
after the CMC period 5 years is over. These charges will not be included in the
price of M&P for the purpose of comparative evaluation of offers.
(l) Tenderers, who are OEM, must give undertaking for supply of spare parts for a
period of expected life of the machine/equipment. Tenderers participating on
authorization of OEM must submit undertaking from OEM for supply of spare
parts for period of expected life of the machine/equipment.
10.7 Training
The contractor during commissioning of the equipment will also train Railway staff in
operation and maintenance of equipment supplied.
Contractor is required to supply 2 copies of operation and maintenance manual and lists
of Spare parts along with the equipment.
10.9 Warranty
a. The contractor shall warrant that the equipment supplied shall be free from defect
and faults on material, workmanship. Manufacturing quality should be of the highest
grade consistent with the established and generally accepted standard goods of the
type offered and in full conformity with the tender specifications.
c. The Contractor shall, if required, replace or repair the equipment or such portion
thereof as is found defective by the Purchaser, free of cost at the ultimate destination
or at the option of the purchaser, the Contractor shall pay to the Purchaser value
thereof at the contract price and such other expenditure and damages as may arise
by reason of the breach of the condition herein specified.
d. Maximum downtime during the warranty period will be 2% for online Machinery and
Plant including Medical equipment and 10% for offline Machinery and Plant
calculated on quarterly basis. Penalty of 0.5% per week on part thereof of the
contract value will be levied for delay in response time for attending and rectification
of fault beyond specified time during the warranty time.
Maximum penalty to be levied on account of warranty failure will be 5% of the
contract value calculated during whole of the warranty period, and after that if there
is any delay on part of the Contractor, purchaser shall be entitled to encash warranty
BG. Further, in such cases bad performance of such Contractor shall be recorded
and circulated to all the zonal railways and in future tender the poor performance of
such tenderer shall be duly considered.
e. The decision of the Purchaser in regard to Contractor’s liability and the amount, if
any, the payable under this warranty shall be final and conclusive.
a. For orders value upto Rs. 1 Lakh – 100% payment will be made after inspection,
receipt, installation and acceptance of equipment by the consignee.
b. For orders valued above Rs. 1 Lakh - 80% payment shall be made against proof
of dispatch / delivery and inspection certificate, 20% after satisfactory installation,
commissioning and acceptance of the equipment by consignee subject to
submission of BG for 10% of the contract value for warranty obligations, valid beyond
6 months period of warranty.
ANNEXURE – 1
Formula for calculating Net Present Value for CMC Charges :‐
CMC Charges for 1st Year after expiry of warranty period of C1
two Years
CMC charges for 2nd year after expiry of warranty period of C2
two years.
CMC charges for 3rd year after expiry of warranty period of C3
two years.
CMC charges for 4th year after expiry of warranty period of C4
two years.
CMC charges for 5th year after expiry of warranty period of C5
two years.
Predetermined percentage rate of discounting = RD @ 8% .
Net present value of CMC charges for 1st P1 = C1/(1+RD/100)³
year
Net present value of CMC charges for 2nd P2 =C2/(1+RD/100)⁴
year
Net present value of CMC charges for 3rd P3 =C3/(1+RD/100)⁵
year.
Net present value of CMC charges for 4th P4 =C4/(1+RD/100)⁶
year
Net present value of CMC charges for 5th P5 =C5/(1+Rd/100)⁷
year.
Total Net present value of CMC charges P =P1+P2+P3+P4+P5
for 5 year.
Total Net present Value of CMC charges for 5 years (P) shall be loaded on FOR destination rate
including cost of installation & commissioning charges quoted by the tenderer for the purpose of
comparative evaluation of offer ( inter‐se‐ranking of the offers).