Data sheet

Thermostatic expansion valves

Type T2 / TE2

Thermostatic expansion valves regulate the

injection of refrigerant liquid into evaporators.

Injection is controlled by the refrigerant

superheat.

Therefore the valves are especially suitable

for liquid injection in ”dry“ evaporators where
the superheat at the evaporator outlet is
proportional to the evaporator load.

Features y Large temperature range y Stainless steel bulb and Danfoss patented
– Equally applicable to freezing, refrigeration bulb strap
and air conditioning applications. – Fast and easy to install
y Interchangeable orifice assembly – Good temperature transfer from pipe to
– easy storage bulb
– easy capacity matching y Valves for special temperature ranges can be
– better service. supplied
– easy cleaning and replacement of filter y Design protected
y Rated capacities from 1 to 20.5 kW /
0.3 to 5.8 TR for R407C
y Can be supplied with MOP (Max. Operating
Pressure).
– Protects the compressor motor against
excessive evaporating pressure during
normal operation

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 1

Data sheet | Thermostatic expansion valves, type T2 / TE2

Identification The thermostatic element has laser engraved

data on top of the diaphragm. This engraving
gives valve type (with code number), evaporating
temperature range, MOP point, refrigerant, and
max. working pressure. PS/MWP.

T2 = internal equalization
TE2 = external equalization

Production place and date

N4511A =
N = Nordborg, Denmark
(BE = Wuqing, China)
45 = week
11 = 2011
A = Monday

Orifice assembly for T2 and TE2 Orifice assembly and filter for flare x flare version
The orifice assembly is marked with the orifice for T2 and TE2
size (e.g. 06) and week stamp + last number in
the year (e.g. 174).
The orifice assembly number is also given on the
lid of its plastic container.

Capillary tube label for T2 and TE2 Capillary tube label

T2 and TE2
The label gives the orifice size (04) and consists
of the lid of the orifice assembly plastic container.
It can easily be fastened around the expansion
valve capillary tube to clearly identify the valve
size.

Technical data Max. temperature Max. test pressure

Bulb, when valve is installed: 100 °C PT = 38 bar
Bulb, element not mounted: 60 °C
Max. working pressure
Min. temperature PS/MWP = 34 bar
T2 – TE2: -60 °C

MOP-points
Range N Range NM Range NL Range B
-40 °C – 10 °C -40 °C – -5 °C -40 °C – -15 °C -60 °C – -25 °C
Refrigerant
MOP-point in evaporating temperature te and evaporating pressure pe 1)
15 °C / 60 °F 0 °C / 32 °F -10 °C / 15 °F -20 °C / -4 °F
R22 100 psig / 6.9 bar (abs) 60 psig / 4.0 bar (abs) 35 psig / 2.4 bar (abs) 20 psig / 1.4 bar (abs)
R407C 95 psig / 6.6 bar (abs) – – –
R134a 55 psig / 3.8 bar (abs) 30 psig / 2.0 bar (abs) 15 psig / 1.0 bar (abs) –
R404A/R507 120 psig / 8.3 bar (abs) 75 psig / 5.2 bar (abs) 50 psig / 3.4 bar (abs) 30 psig / 2.1 bar (abs)
1
) Pe in bar gauge

Superheat SS = static superheat Standard superheat setting SS is 4K for all

OS = opening superheat standard valves.
SH = SS + OS = total superheat The opening superheat OS is 6 K from when
Qnom = rated capacity opening begins to where the valve gives its rated
Qmax = maximum capacity capacity Qnom.

Static superheat SS can be adjusted with setting Example

spindle. Static superheat SS = 5 K
Opening superheat OS = 6 K
Total superheat SH = 5 + 6 = 11 K

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 2

Data sheet | Thermostatic expansion valves, type T2 / TE2

Design Function General External pressure equalization should always be

T2 and TE2 valves have an interchangeable orifice used on systems with liquid distributors.
assembly. The bulb gives fast and precise reaction to
temperature changes in the
The orifice assembly is suitable for all versions of evaporator. The bulb is fixed with a Danfoss
valve body and refrigerants and in all evaporating patented bulb strap for quick, easy and reliable
temperature ranges. connection. The valves are able to withstand
The charge in the thermostatic element depends the effects that normally occur with hot gas
on the refrigerant and evaporating temperature defrosting.
range.
The valves are available with internal (T2) or To ensure long operating life, the valve cone and
external (TE2) pressure equalization. seat are made of a special alloy with particularly
good wear qualities.

68Z05.14.20
Danfoss
1

2
4

1. Thermostatic element d
a(p
ihargm) 3
2. Interchangeable orifice assembly T2
3. Valve body
4. Superheat setting spindle (see
instructions)

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 3

Data sheet | Thermostatic expansion valves, type T2 / TE2

Technical data and ordering T2/TE2 Thermostatic element with bulb strap Capillary tube: 1.5 m
Flare x flare Range N = -40 – 10 °C
Range B = -60 – -25 °C
Range NM = -40 – -5 °C MOP 0 °C
Range NL = -40 – -15 °C MOP -10 °C

Pressure Connection flare

Range MOP Code no.
Refrigerant Type equlization inlet × outlet
Multi pack
[°C] [°C] Flare [in] [mm]
T2 -40 – 10 – – / × 1/2
3 8
10×12 068Z3206
T2 -40 – 10 15 – / × 1/2
3 8
10×12 068Z3208
T2 -40 – -5 0 – / × 1/2
3 8
10×12 068Z3224
T2 -40 – -15 -10 – / × 1/2
3 8
10×12 068Z3226
T2 -60 – -25 – – / × 1/2
3 8
10×12 068Z3207
T2 -60 – -25 -20 – / × 1/2
3 8
10×12 068Z3228
R22/R407C 1)
TE2 -40 – 10 – ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3209
TE2 -40 – 10 15 ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3211
TE2 -40 – -5 0 ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3225
TE2 -40 – -15 -10 ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3227
TE2 -60 – -25 – ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3210
TE2 -60 – -25 -20 ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3229
T2 -40 – 10 – – / × 1/2
3 8
10×12 068Z3496
T2 -40 – 10 15 – / × 1/2
3 8
10×12 068Z3516
R407C
TE2 -40 – 10 – ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3501
TE2 -40 – 10 15 ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3517
T2 -40 – 10 – – / × 1/2
3 8
10×12 068Z3346
T2 -40 – 10 15 – / × 1/2
3 8
10×12 068Z3347
T2 -40 – -5 0 – / × 1/2
3 8
10×12 068Z3393
T2 -40 – -15 -10 – / × 1/2
3 8
10×12 068Z3369
R134a/R513A
TE2 -40 – 10 – ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3348
TE2 -40 – 10 15 ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3349
TE2 -40 – -5 0 ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3392
TE2 -40 – -15 -10 ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3370
T2 -40 – 10 – – / × 1/2
3 8
10×12 068Z3400
T2 -40 – 10 15 – / × 1/2
3 8
10×12 068Z3402
T2 -40 – -5 0 – / × 1/2
3 8
10×12 068Z3406
T2 -40 – -15 -10 – / × 1/2
3 8
10×12 068Z3408
T2 -60 – -25 – – / × 1/2
3 8
10×12 068Z3401
T2 -60 – -25 -20 – / × 1/2
3 8
10×12 068Z3410
R404A/R507
TE2 -40 – 10 – ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3403
TE2 -40 – 10 15 ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3405
TE2 -40 – -5 0 ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3407
TE2 -40 – -15 -10 ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3409
TE2 -60 – -25 – ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3404
TE2 -60 – -25 -20 ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3411
T2 -40 – 10 – – / × 1/2
3 8
10×12 068Z3715
R407F/R407A
TE2 -40 – 10 – ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3714
T2 -40 – 10 – – / × 1/2
3 8
– 068Z3727
TE2 -40 – 10 – ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3728
R448A/R449A T2 -40 – -15 -10 – / × 1/2
3 8
10×12 068Z3675
T2 -60 – -25 -20 – / × 1/2
3 8
10×12 068Z3735
TE2 -60 – -25 -20 ¼ in / 6 mm / × 1/2
3 8
10×12 068Z3736
T2 -40 – 10 - – / × 1/2
3 8
10x12 068Z7483
R454C
TE2 -40 – 10 - ¼ in / 6 mm / × 1/2
3 8
10x12 068Z7485
T2 -40 – 10 - – / × 1/2
3 8
10x12 068Z7496
R455A
TE2 -40 – 10 - ¼ in / 6 mm / × 1/2
3 8
10x12 068Z7499
T2 -40 – 10 - – / × 1/2
3 8
10x12 068Z7487
R1234yf
TE2 -40 – 10 - ¼ in / 6 mm / × 1/2
3 8
10x12 068Z7489
) For R407C plants. Please select valves from the dedicated R407C program
1

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 4

Data sheet | Thermostatic expansion valves, type T2 / TE2

Technical data and ordering T2/TE2 Thermostatic element with bulb strap Capillary tube: 1.5 m
Flare x solder Range N = -40 – 10 °C
Range NL = -40 – -15 °C
Range B = -60 – -25 °C
Pressure Connection
Range MOP Code no.
Refrigerant Type equalization inlet (Flare) × outlet (Solder)
Multi pack
[°C] [°C] solder [in] [mm]
T2 -40 – 10 – – / × 1/2
3 8
– 068Z3281
T2 -40 – 10 – – – 10×12 068Z3302
T2 -40 – 10 15 – / × 1/2
3 8
– 068Z3287
T2 -40 – 10 15 – – 10×12 068Z3308
T2 -40 – -15 -10 – – 10×12 068Z3366
T2 -60 – -25 – – / × 1/2
3 8
– 068Z3357
T2 -60 – -25 – – – 10×12 068Z3361
T2 -60 – -25 -20 – / × 1/2
3 8
– 068Z3319
R22/R407C 1)
TE2 -40 – 10 – ¼ in / × 1/2
3 8
– 068Z3284
TE2 -40 – 10 – 6 mm – 10×12 068Z3305
TE2 -40 – 10 15 ¼ in / × 1/2
3 8
– 068Z3290
TE2 -40 – 10 15 6 mm – 10×12 068Z3311
TE2 -40 – -15 -10 6 mm – 10×12 068Z3367
TE2 -60 – -25 – ¼ in / × 1/2
3 8
– 068Z3359
TE2 -60 – -25 – 6 mm – 10×12 068Z3363
TE2 -60 – -25 -20 – / × 1/2
3 8
– 068Z3320
T2 -40 – 10 – – – 10×12 068Z3502
T2 -40 – 10 15 – / × 1/2
3 8
– 068Z3329
T2 -40 – 10 15 – – 10×12 068Z3514
R407C TE2 -40 – 10 – ¼ in / × 1/2
3 8
/ in
1 2
068Z3446
TE2 -40 – 10 – 6 mm – 10×12 068Z3503
TE2 -40 – 10 15 ¼ in / × 1/2
3 8
– 068Z3447
TE2 -40 – 10 15 6 mm – 10×12 068Z3515
T2 -40 – 10 – – / × 1/2
3 8
– 068Z3383
T2 -40 – 10 – – – 10×12 068Z3384
T2 -40 – 10 15 – / × 1/2
3 8
– 068Z3387
T2 -40 – 10 15 – – 10×12 068Z3388
R134a/R513A
TE2 -40 – 10 – ¼ in / × 1/2
3 8
– 068Z3385
TE2 -40 – 10 – 6 mm – 10×12 068Z3386
TE2 -40 – 10 15 ¼ in / × 1/2
3 8
– 068Z3389
TE2 -40 – 10 15 6 mm – 10×12 068Z3390
T2 -40 – 10 – – / × 1/2
3 8
– 068Z3414
T2 -40 – 10 – – – 10×12 068Z3435
T2 -40 – 10 15 – / × 1/2
3 8
– 068Z3416
T2 -40 – 10 15 – – 10×12 068Z3423
T2 -40 – -15 -10 – / × 1/2
3 8
– 068Z3429
T2 -40 – -15 -10 – – 10×12 068Z3436
T2 -60 – -25 – – / × 1/2
3 8
– 068Z3418
T2 -60 – -25 – – – 10×12 068Z3425
T2 -60 – -25 -20 – / × 1/2
3 8
– 068Z3420
T2 -60 – -25 -20 – – 10×12 068Z3427
R404A/R507
TE2 -40 – 10 – ¼ in / × 1/2
3 8
– 068Z3415
TE2 -40 – 10 – 6 mm – 10×12 068Z3422
TE2 -40 – 10 15 6 mm – 10×12 068Z3424
TE2 -40 – 10 15 ¼ in / × 1/2
3 8
– 068Z3417
TE2 -40 – -15 -10 ¼ in / × 1/2
3 8
– 068Z3430
TE2 -40 – -15 -10 6 mm – 10×12 068Z3437
TE2 -60 – -25 – ¼ in / × 1/2
3 8
– 068Z3419
TE2 -60 – -25 – 6 mm – 10×12 068Z3426
TE2 -60 – -25 -20 ¼ in / × 1/2
3 8
– 068Z3421
TE2 -60 – -25 -20 6 mm – 10×12 068Z3428
T2 -40 – 10 – – / × 1/2
3 8
– 068Z3716
R407F/R407A
TE2 -40 – 10 – ¼ in / × 1/2
3 8
– 068Z3713
T2 -40 – 10 – – / × 1/2
3 8
– 068Z3729
TE2 -40 – 10 – ¼ in / × 1/2
3 8
– 068Z3730
T2 -40 – -15 -10 – / × 1/2
3 8
– 068Z3664
T2 -60 – -25 -20 – / × 1/2
3 8
– 068Z3737
R448A/R449A
TE2 -40 – -15 -10 ¼ in / × 1/2
3 8
– 068Z3665
TE2 -60 – -25 -20 ¼ in / × 1/2
3 8
– 068Z3738
T2 -40 – -15 -10 – – 10×12 068Z3674
TE2 -60 – -25 -20 6 mm – 10×12 068Z3672
T2 -40 – 10 – – / × 1/2
3 8
– 068Z3806
TE2 -40 – 10 – ¼ in / × 1/2
3 8
– 068Z3807
R452A
T2 -40 – 10 – – – 10×12 068Z3808
TE2 -40 – 10 – 6 mm – 10×12 068Z3809
) For R407C plants, please select valves from the dedicated R407C program
1

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 5

Data sheet | Thermostatic expansion valves, type T2 / TE2

T2/TE2 Thermostatic element with bulb strap Capillary tube: 1.5 m

Flare x solder Range N = -40 – 10 °C
Range NL = -40 – -15 °C
Range B = -60 – -25 °C
Pressure Connection
Range MOP Code no.
Refrigerant Type equalization inlet (Flare) × outlet (Solder)
Multi pack
[°C] [°C] solder [in] [mm]
T2 -40 – 10 – – / × 1/2
3 8
– 068Z7490
T2 -40 – 10 – – – 10x12 068Z7484
R454C
TE2 -40 – 10 – ¼ in / × 1/2
3 8
– 068Z7492
TE2 -40 – 10 – 6 mm – 10x12 068Z7486
T2 -40 – 10 – – / × 1/2
3 8
– 068Z7494
T2 -40 – 10 – – – 10x12 068Z7498
R455A
TE2 -40 – 10 – ¼ in / × 1/2
3 8
– 068Z7501
TE2 -40 – 10 – 6 mm – 10x12 068Z7500
T2 -40 – 10 – – / × 1/2
3 8
– 068Z7491
T2 -40 – 10 – – – 10x12 068Z7488
R1234yf
TE2 -40 – 10 – ¼ in / × 1/2
3 8
– 068Z7493
TE2 -40 – 10 – 6 mm 10x12 068Z7495

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 6

Data sheet | Thermostatic expansion valves, type T2 / TE2

Flare connections Connection for copper tubing Reducer for copper tubing Code no.
with outside diameter with outside diameter
[in] [mm] [in] [mm]
/
1 4
6 – – 011L1101
3
/8 10 – – 011L1135
/
1 2
12 – – 011L1103
– – /
1 4
6 011L1107
Example :
A TE2 thermostatic expansion valve consists of When ordering one thermostatic expansion valve,
two elements + flare nuts if required: TE2 with orifice 01, five code numbers are required:
– 1 thermostatic element – 1-off thermostatic element 068Z3209
– 1 orifice assembly and flare nuts – 1-off orifice assembly 01 068-2010
– 1-off 3⁄8 in flare nut 011L1135
– 1-off ⁄ in flare nut
12
011L1103
– 1-off 1⁄4 in flare nut 011L1101
Range N: -40 to 50 °F
The rated capacity is based on: Rated capacity in tons (TR)
Evaporating temperature te = 40 °F Orifice
Condensing temperature tc = 100 °F no. R404A
R22 R407C R134a R513A R407A R407F R448A R449A R454C R455A R1234yf
Refrigerant temperature ahead R507
of valve tl = 98 °F 0X 0.25 0.26 0.19 0.16 0.18 0.25 0.28 0.26 0.25 0.22 0.24 0.14
00 0.51 0.51 0.34 0.29 0.37 0.49 0.56 0.51 0.49 0.42 0.47 0.25
01 1.0 1.0 0.59 0.51 0.75 1.0 1.1 1.0 0.97 0.79 0.93 0.43
02 1.3 1.4 0.73 0.62 1.0 1.3 1.5 1.4 1.3 1.0 1.3 0.53
03 2.3 2.3 1.2 1.0 1.8 2.3 2.6 2.3 2.3 1.8 2.2 0.88
04 3.4 3.5 1.8 1.5 2.8 3.5 4.1 3.6 3.5 2.6 3.3 1.3
05 4.8 4.7 2.4 2.0 3.7 4.6 5.4 4.6 4.5 3.4 4.2 1.7
06 5.6 5.6 2.9 2.5 4.4 5.6 6.5 5.7 5.5 4.2 5.2 2.1

Range N: -40 to 10 °C
The rated capacity is based on: Rated capacity in kW
Evaporating temperature te = 4.4 °C Orifice
Condensing temperature tc = 38 °C no. R404A
R22 R407C R134a R513A R407A R407F R448A R449A R454C R455A R1234yf
Refrigerant temperature ahead R507
of valve tl = 37 °C
0X 0.90 0.92 0.68 0.58 0.64 0.88 1.0 0.90 0.88 0.77 0.86 0.49
00 1.8 1.8 1.2 1.0 1.3 1.7 2.0 1.8 1.7 1.5 1.7 0.87
01 3.5 3.5 2.1 1.8 2.6 3.4 3.9 3.5 3.4 2.8 3.3 1.5
02 4.7 4.8 2.6 2.2 3.7 4.7 5.4 4.8 4.6 3.6 4.4 1.8
03 8.0 8.1 4.3 3.7 6.3 8.0 9.2 8.1 7.9 6.2 7.6 3.1
04 12.1 12.4 6.4 5.4 9.9 12.4 14.3 12.6 12.1 9.3 11.5 4.6
05 16.7 16.5 8.4 6.9 13.0 16.3 19.0 16.3 15.7 11.8 14.7 5.9
06 19.7 19.7 10.1 8.6 15.5 19.6 22.9 19.8 19.1 14.8 18.3 7.3

Orifice assembly with filter Orifice assembly with filter for solder adaptor
Orifice no. Code no. Orifice no. Code no.
68Z62.11
Danfoss

0X 068-2002 0X 068-2089
00 068-2003 00 068-2090
01 068-2010 01 068-2091
02 068-2015 02 068-2092
03 068-2006 03 068-2093
1 2 04 068-2007 04 068-2094
1. Orifice assembly with filter 05 068-2008 05 068-2095
2. Orifice assembly with filter for 06 068-2009 06 068-2096
solder adaptor

Filter
Filter type Code no. Multi pack
For flare connection 068-0003
For solder adaptor 068-0015

The adaptor is for use with thermostatic expansion is replaced with a specific filter intended for solder
valves T2 and TE2. When the adaptor is fitted adaptors.
correctly it meets the sealing requirements of Only in this way the sealing requirements of
DIN 8964. The flare orifice in T2 and TE2 can be DIN 8964 can be fulfilled. Solder adaptors for filter
used with a solder adaptor when the orifice filter driers (FSA) must not be used on the T2 inlet.

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 7

Data sheet | Thermostatic expansion valves, type T2 / TE2

Solder adaptor The adaptor is for use with thermostatic When using the solder adapter, a special orifice
expansion valves T2 and TE2 with assembly is required. Please use the following
flare × solder connections. When the adaptor is tables to select both the appropriate adapter and
fitted correctly it meets the sealing requirements orifice asembly.
of DIN 8964. Only in this way can the sealing requirements of
The adaptor offers the following advantages: DIN 8964 be fulfilled.
The orifice assembly can be replaced. Solder adaptor for filter drier (FSA) may not be
used in the T2 inlet.
The filter can be cleaned or replaced.

Solder adaptor without orifice assembly and filter Filter for solder adaptor
Connection ODF solder Code no. Description Code no.
1
⁄4 in 068-2062 Filter excl. orifice assembly 068-0015
6 mm 068-2063
3
⁄8 in 068-2060
10 mm 068-2061

Bulb strap (Danfoss patented) Each valve is delivered with a Danfoss patented
bulb strap. Spares can be ordered.

Description Pack mode Quantity / pack Code no.

Bulb strap 0.4 mm Max. 28 mm tube I 45 068U3505
Bulb strap 0.4 mm Max. 50 mm tube I 45 068U3506
Bulb strap 0.4 mm Max. 28 mm tube M 25 068U3507
Bulb strap 0.4 mm Max. 50 mm tube M 25 068U3508

How to select a valve Refrigerant = R407C Q (capacity) = 1.1kW

Q (capacity) = 1.1kW fsub (subcooling correction factor) = 0.98
Example: Tcond (condensing temperature) = 25 °C
fp (distribution correction factor) = 0.96
Tevap (evaporator temperature) = -30 °C Q
Tsub (subcooling temperature) = 2 K = Selected capacity
fsub x fp
Dpd (distributer pressure drop) = 1 bar
1.1
= 1.17 kW
0.98 x 0.96
The selection will be:
TE2 orifice 00 (1.21 kW > 1.17 kW)

Capacity in kW, range N -40 °C to 10 °C. Opening superheat sh= 6 K

Cond. temp. Evaporating [°C]
Valve type Orifice no.
[°C] -40 -30 -20 -10
T2 / TE2 0X 0.76 0.83 0.88 0.90
T2 / TE2 00 25 0.99 1.21 1.42 1.60
T2 / TE2 01 1.41 1.80 2.27 2.77

Subcooling correction factor 'fsub'

Subcooling [K] 2 4 10 15
Correction factor 0.98 1.00 1.07 1.12

Distributer correction factor 'fp' *)

Pressure drop Evaporating [°C]
[bar] -40 -35 -30 -25
0 1 1 1 1
“Pressure 1 0.96 0.96 0.96 0.96
drop
[bar]” 1.5 0.94 0.94 0.94 0.94
2 0.92 0.92 0.92 0.92
*) Calculated at 32 °C condensing temperature

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 8

Data sheet | Thermostatic expansion valves, type T2 / TE2

Capacity Capacity in kW, range N -40 °C to 10 °C. Opening superheat sh= 6 K R22
Evaporating [°C]
Cond. temp. -40 -30 -20 -10 0 10
Valve type Orifice no.
[°C]
Capacity [kW]
T2 / TE2 0X 0.75 0.82 0.86 0.86 0.81 0.68
T2 / TE2 00 0.95 1.18 1.39 1.53 1.55 1.37
T2 / TE2 01 1.32 1.72 2.18 2.63 2.91 2.78
T2 / TE2 02 1.49 1.98 2.57 3.24 3.82 3.88
25
T2 / TE2 03 2.49 3.32 4.32 5.43 6.40 6.57
T2 / TE2 04 3.59 4.79 6.35 8.16 9.72 9.88
T2 / TE2 05 4.69 6.25 8.30 10.80 13.10 13.50
T2 / TE2 06 5.53 7.36 9.73 12.70 15.40 16.00

Evaporating [°C]
Cond. temp. -40 -30 -20 -10 0 10
Valve type Orifice no.
[°C]
Capacity [kW]
T2 / TE2 0X 0.78 0.86 0.91 0.93 0.92 0.85
T2 / TE2 00 0.99 1.23 1.47 1.67 1.77 1.72
T2 / TE2 01 1.37 1.80 2.31 2.86 3.33 3.50
T2 / TE2 02 1.56 2.08 2.74 3.54 4.38 4.92
35
T2 / TE2 03 2.62 3.51 4.62 5.96 7.39 8.35
T2 / TE2 04 3.85 5.12 6.83 8.98 11.20 12.70
T2 / TE2 05 5.03 6.68 8.93 11.90 15.30 17.50
T2 / TE2 06 5.89 7.82 10.40 13.90 17.90 20.70

Evaporating [°C]
Cond. temp. -40 -30 -20 -10 0 10
Valve type Orifice no.
[°C]
Capacity [kW]
T2 / TE2 0X 0.80 0.88 0.94 0.97 0.98 0.95
T2 / TE2 00 1.01 1.26 1.52 1.75 1.90 1.94
T2 / TE2 01 1.41 1.85 2.39 3.00 3.59 3.96
T2 / TE2 02 1.61 2.14 2.84 3.72 4.74 5.60
45
T2 / TE2 03 2.71 3.64 4.82 6.32 8.08 9.63
T2 / TE2 04 4.06 5.37 7.14 9.47 12.20 14.50
T2 / TE2 05 5.30 7.01 9.37 12.60 16.70 20.30
T2 / TE2 06 6.19 8.18 10.90 14.70 19.50 24.00

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.79 0.88 0.94 0.98 1.00 0.99
T2 / TE2 00 1.01 1.26 1.53 1.77 1.95 2.04
T2 / TE2 01 1.42 1.87 2.42 3.06 3.71 4.19
T2 / TE2 02 1.63 2.18 2.89 3.81 4.92 5.95
55
T2 / TE2 03 2.76 3.70 4.93 6.51 8.46 10.30
T2 / TE2 04 4.23 5.53 7.32 9.68 12.50 15.30
T2 / TE2 05 5.52 7.24 9.64 13.00 17.30 21.70
T2 / TE2 06 6.42 8.43 11.20 15.10 20.30 25.80

Subcooling correction factor 'fsub'

Subcooling [K] 2 4 10 15 20 25 30 35 40 45 50
Correction factor 0.98 1.00 1.05 1.10 1.14 1.19 1.23 1.28 1.32 1.36 1.41
Distributer correction factor 'fp' *)
Pressure drop Evaporating [°C]
[bar] -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15
0 1 1 1 1 1 1 1 1 1 1 1 1
“Pressure 1 0.96 0.95 0.95 0.95 0.95 0.95 0.94 0.94 0.93 0.92 0.91 0.89
drop
[bar]” 1.5 0.93 0.93 0.93 0.93 0.92 0.92 0.91 0.91 0.90 0.88 0.86 0.82
2 0.91 0.91 0.90 0.90 0.90 0.89 0.88 0.87 0.86 0.84 0.81 0.76
*) Calculated at 32 °C condensing temperature

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 9

Data sheet | Thermostatic expansion valves, type T2 / TE2

Capacity Capacity in kW, range B -60 °C to -25 °C. Opening superheat sh= 6 K R22
Evaporating [°C]
Cond. temp.
Valve type Orifice no. -60 -50 -40 -30
[°C]
Capacity [kW]
T2 / TE2 0X 0.54 0.67 0.78 0.84
T2 / TE2 00 0.55 0.77 1.03 1.28
T2 / TE2 01 0.72 1.06 1.47 1.95
T2 / TE2 02 0.80 1.17 1.66 2.26
25
T2 / TE2 03 1.32 1.94 2.76 3.77
T2 / TE2 04 1.87 2.76 3.95 5.45
T2 / TE2 05 2.45 3.60 5.15 7.14
T2 / TE2 06 2.91 4.26 6.10 8.50

Evaporating [°C]
Cond. temp. -60 -50 -40 -30
Valve type Orifice no.
[°C]
Capacity [kW]
T2 / TE2 0X 0.56 0.69 0.80 0.88
T2 / TE2 00 0.56 0.79 1.06 1.34
T2 / TE2 01 0.74 1.08 1.52 2.04
T2 / TE2 02 0.82 1.20 1.72 2.36
35
T2 / TE2 03 1.35 1.99 2.85 3.93
T2 / TE2 04 1.90 2.81 4.04 5.63
T2 / TE2 05 2.50 3.66 5.26 7.36
T2 / TE2 06 2.96 4.33 6.21 8.71

Evaporating [°C]
Cond. temp. -60 -50 -40 -30
Valve type Orifice no.
[°C]
Capacity [kW]
T2 / TE2 0X 0.56 0.70 0.82 0.91
T2 / TE2 00 0.57 0.80 1.08 1.37
T2 / TE2 01 0.75 1.10 1.55 2.09
T2 / TE2 02 0.82 1.22 1.74 2.41
45
T2 / TE2 03 1.36 2.01 2.88 4.00
T2 / TE2 04 1.91 2.82 4.06 5.70
T2 / TE2 05 2.52 3.68 5.29 7.42
T2 / TE2 06 2.98 4.35 6.23 8.75

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -60 -50 -40 -30
[°C]
Capacity [kW]
T2 / TE2 0X 0.56 0.70 0.82 0.91
T2 / TE2 00 0.57 0.80 1.08 1.38
T2 / TE2 01 0.75 1.10 1.55 2.10
T2 / TE2 02 0.82 1.21 1.74 2.41
55
T2 / TE2 03 1.36 2.00 2.87 4.01
T2 / TE2 04 1.89 2.79 4.03 5.66
T2 / TE2 05 2.52 3.67 5.25 7.37
T2 / TE2 06 2.98 4.32 6.17 8.66

Subcooling correction factor 'fsub'

Subcooling [K] 2 4 10 15 20 25 30 35 40 45 50
Correction factor 0.98 1.00 1.07 1.12 1.18 1.23 1.28 1.34 1.39 1.45 1.50
Distributer correction factor 'fp' *)
Pressure drop Evaporating [°C]
[bar] -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15
0 1 1 1 1 1 1 1 1 1 1 1 1
“Pressure 1 0.96 0.96 0.96 0.96 0.96 0.96 0.95 0.95 0.95 0.94 0.93 0.92
drop
[bar]” 1.5 0.94 0.94 0.94 0.94 0.94 0.93 0.93 0.93 0.92 0.91 0.90 0.88
2 0.92 0.92 0.92 0.92 0.91 0.91 0.91 0.90 0.89 0.88 0.86 0.84
*) Calculated at 32 °C condensing temperature

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 10

Data sheet | Thermostatic expansion valves, type T2 / TE2

Capacity Capacity in kW, range N -40 °C to 10 °C. Opening superheat sh= 6 K R407C
Evaporating [°C]
Cond. temp. -40 -30 -20 -10 0 10
Valve type Orifice no.
[°C]
Capacity [kW]
T2 / TE2 0X 0.76 0.83 0.88 0.90 0.88 0.81
T2 / TE2 00 0.99 1.21 1.42 1.60 1.69 1.63
T2 / TE2 01 1.41 1.80 2.27 2.77 3.19 3.31
T2 / TE2 02 1.59 2.06 2.67 3.40 4.18 4.64
25
T2 / TE2 03 2.65 3.44 4.46 5.73 7.07 7.85
T2 / TE2 04 3.86 4.98 6.44 8.35 10.60 12.50
T2 / TE2 05 5.04 6.52 8.46 11.00 14.00 16.30
T2 / TE2 06 5.94 7.71 10.10 13.20 16.80 19.40

Evaporating [°C]
Cond. temp. -40 -30 -20 -10 0 10
Valve type Orifice no.
[°C]
Capacity [kW]
T2 / TE2 0X 0.76 0.84 0.90 0.94 0.95 0.92
T2 / TE2 00 0.99 1.22 1.45 1.67 1.81 1.85
T2 / TE2 01 1.40 1.81 2.32 2.88 3.43 3.76
T2 / TE2 02 1.59 2.08 2.72 3.54 4.48 5.28
35
T2 / TE2 03 2.66 3.48 4.57 5.98 7.62 8.98
T2 / TE2 04 3.93 5.10 6.65 8.74 11.40 14.20
T2 / TE2 05 5.13 6.66 8.73 11.50 15.10 18.60
T2 / TE2 06 6.01 7.85 10.40 13.80 18.10 22.20

Evaporating [°C]
Cond. temp. -40 -30 -20 -10 0 10
Valve type Orifice no.
[°C]
Capacity [kW]
T2 / TE2 0X 0.73 0.82 0.89 0.94 0.97 0.97
T2 / TE2 00 0.95 1.19 1.43 1.67 1.85 1.94
T2 / TE2 01 1.36 1.77 2.28 2.88 3.50 3.97
T2 / TE2 02 1.55 2.04 2.69 3.54 4.58 5.58
45
T2 / TE2 03 2.60 3.42 4.53 6.01 7.82 9.52
T2 / TE2 04 3.89 5.07 6.66 8.83 11.70 15.00
T2 / TE2 05 5.06 6.62 8.73 11.70 15.60 19.80
T2 / TE2 06 5.90 7.76 10.30 13.90 18.70 23.60

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.68 0.77 0.85 0.91 0.95 0.96
T2 / TE2 00 0.89 1.12 1.37 1.61 1.81 1.93
T2 / TE2 01 1.27 1.67 2.18 2.78 3.43 3.96
T2 / TE2 02 1.46 1.93 2.57 3.42 4.49 5.58
55
T2 / TE2 03 2.46 3.27 4.36 5.84 7.71 9.60
T2 / TE2 04 3.74 4.90 6.48 8.65 11.60 15.10
T2 / TE2 05 4.85 6.39 8.49 11.40 15.40 20.00
T2 / TE2 06 5.61 7.45 9.99 13.60 18.50 24.00

Subcooling correction factor 'fsub'

Subcooling [K] 2 4 10 15 20 25 30 35 40 45 50
Correction factor 0.98 1.00 1.07 1.12 1.18 1.23 1.28 1.34 1.39 1.45 1.50
Distributer correction factor 'fp' *)
Pressure drop Evaporating [°C]
[bar] -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15
0 1 1 1 1 1 1 1 1 1 1 1 1
“Pressure 1 0.96 0.96 0.96 0.96 0.96 0.96 0.95 0.95 0.95 0.94 0.93 0.92
drop
[bar]” 1.5 0.94 0.94 0.94 0.94 0.94 0.93 0.93 0.93 0.92 0.91 0.90 0.88
2 0.92 0.92 0.92 0.92 0.91 0.91 0.91 0.90 0.89 0.88 0.86 0.84
*) Calculated at 32 °C condensing temperature

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 11

Data sheet | Thermostatic expansion valves, type T2 / TE2

Capacity Capacity in kW, range N -40 °C to 10 °C. Opening superheat sh= 6 K R134a
Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.48 0.54 0.59 0.62 0.61 0.54
T2 / TE2 00 0.52 0.67 0.82 0.95 1.03 0.98
T2 / TE2 01 0.70 0.92 1.19 1.48 1.72 1.77
T2 / TE2 02 0.78 1.03 1.35 1.73 2.08 2.24
25
T2 / TE2 03 1.31 1.72 2.27 2.89 3.49 3.76
T2 / TE2 04 1.89 2.49 3.28 4.21 5.15 5.69
T2 / TE2 05 2.50 3.28 4.33 5.57 6.80 7.48
T2 / TE2 06 2.98 3.93 5.20 6.69 8.16 8.96

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.49 0.57 0.63 0.67 0.69 0.66
T2 / TE2 00 0.54 0.69 0.86 1.03 1.17 1.22
T2 / TE2 01 0.72 0.96 1.25 1.60 1.95 2.20
T2 / TE2 02 0.81 1.07 1.43 1.87 2.36 2.79
35
T2 / TE2 03 1.36 1.80 2.40 3.14 3.96 4.69
T2 / TE2 04 2.02 2.64 3.51 4.60 5.85 7.07
T2 / TE2 05 2.66 3.48 4.62 6.06 7.72 9.31
T2 / TE2 06 3.15 4.14 5.51 7.24 9.24 11.10

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.49 0.57 0.64 0.69 0.73 0.74
T2 / TE2 00 0.54 0.70 0.88 1.07 1.25 1.36
T2 / TE2 01 0.73 0.97 1.28 1.66 2.08 2.46
T2 / TE2 02 0.82 1.09 1.46 1.93 2.51 3.11
45
T2 / TE2 03 1.38 1.83 2.45 3.25 4.22 5.24
T2 / TE2 04 2.10 2.73 3.63 4.80 6.24 7.89
T2 / TE2 05 2.76 3.59 4.76 6.31 8.23 10.40
T2 / TE2 06 3.25 4.24 5.64 7.51 9.82 12.40

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.47 0.56 0.63 0.69 0.74 0.76
T2 / TE2 00 0.53 0.69 0.87 1.07 1.27 1.43
T2 / TE2 01 0.72 0.95 1.26 1.65 2.11 2.57
T2 / TE2 02 0.81 1.08 1.45 1.94 2.55 3.24
55
T2 / TE2 03 1.38 1.82 2.44 3.27 4.30 5.50
T2 / TE2 04 2.14 2.77 3.66 4.85 6.38 8.25
T2 / TE2 05 2.81 3.63 4.80 6.37 8.40 10.90
T2 / TE2 06 3.30 4.26 5.65 7.54 10.00 13.00

Subcooling correction factor 'fsub'

Subcooling [K] 2 4 10 15 20 25 30 35 40 45 50
Correction factor 0.98 1.00 1.07 1.12 1.18 1.23 1.29 1.34 1.40 1.45 1.50
Distributer correction factor 'fp' *)
Pressure drop Evaporating [°C]
[bar] -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15
0 1 1 1 1 1 1 1 1 1 1 1 1
“Pressure 1 0.93 0.93 0.93 0.93 0.92 0.92 0.92 0.91 0.90 0.89 0.87 0.83
drop
[bar]” 1.5 0.90 0.89 0.89 0.89 0.88 0.88 0.87 0.86 0.84 0.82 0.79 0.74
2 0.86 0.86 0.85 0.85 0.84 0.83 0.82 0.81 0.79 0.76 0.71 0.62
*) Calculated at 32 °C condensing temperature

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 12

Data sheet | Thermostatic expansion valves, type T2 / TE2

Capacity Capacity in kW, range N -40 °C to 10 °C. Opening superheat sh= 6 K R404A
Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.55 0.61 0.64 0.65 0.62 0.54
T2 / TE2 00 0.72 0.92 1.09 1.21 1.22 1.08
T2 / TE2 01 1.00 1.38 1.81 2.20 2.40 2.25
T2 / TE2 02 1.12 1.58 2.17 2.79 3.25 3.22
25
T2 / TE2 03 1.86 2.65 3.65 4.72 5.49 5.42
T2 / TE2 04 2.68 3.83 5.36 7.12 8.53 8.69
T2 / TE2 05 3.51 5.04 7.06 9.38 11.20 11.30
T2 / TE2 06 4.15 5.99 8.43 11.20 13.40 13.30

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.52 0.59 0.64 0.67 0.68 0.64
T2 / TE2 00 0.67 0.88 1.08 1.25 1.34 1.29
T2 / TE2 01 0.95 1.33 1.79 2.28 2.64 2.70
T2 / TE2 02 1.07 1.53 2.15 2.90 3.59 3.89
35
T2 / TE2 03 1.78 2.57 3.64 4.93 6.11 6.57
T2 / TE2 04 2.60 3.75 5.37 7.45 9.53 10.60
T2 / TE2 05 3.40 4.93 7.07 9.82 12.50 13.70
T2 / TE2 06 4.00 5.83 8.40 11.70 14.90 16.30

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.46 0.54 0.60 0.65 0.68 0.67
T2 / TE2 00 0.61 0.81 1.01 1.20 1.34 1.38
T2 / TE2 01 0.86 1.22 1.68 2.19 2.66 2.87
T2 / TE2 02 0.97 1.41 2.02 2.81 3.64 4.16
45
T2 / TE2 03 1.63 2.38 3.43 4.80 6.23 7.06
T2 / TE2 04 2.43 3.50 5.08 7.26 9.74 11.40
T2 / TE2 05 3.17 4.60 6.69 9.58 12.90 14.90
T2 / TE2 06 3.71 5.41 7.92 11.40 15.40 17.70

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.39 0.47 0.54 0.59 0.62 0.64
T2 / TE2 00 0.52 0.70 0.89 1.07 1.23 1.30
T2 / TE2 01 0.74 1.06 1.47 1.96 2.44 2.73
T2 / TE2 02 0.85 1.23 1.78 2.52 3.35 3.96
55
T2 / TE2 03 1.43 2.09 3.03 4.32 5.78 6.76
T2 / TE2 04 2.17 3.10 4.50 6.51 8.98 10.90
T2 / TE2 05 2.83 4.07 5.92 8.61 11.90 14.40
T2 / TE2 06 3.29 4.77 6.99 10.30 14.30 17.20

Subcooling correction factor 'fsub'

Subcooling [K] 2 4 10 15 20 25 30 35 40 45 50
Correction factor 0.97 1.00 1.09 1.16 1.23 1.30 1.38 1.45 1.52 1.59 1.65
Distributer correction factor 'fp' *)
Pressure drop Evaporating [°C]
[bar] -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15
0 1 1 1 1 1 1 1 1 1 1 1 1
“Pressure 1 0.96 0.96 0.96 0.96 0.96 0.96 0.95 0.95 0.94 0.94 0.92 0.91
drop
[bar]” 1.5 0.94 0.94 0.94 0.94 0.94 0.93 0.93 0.92 0.91 0.90 0.88 0.86
2 0.92 0.92 0.92 0.92 0.91 0.91 0.90 0.89 0.88 0.87 0.84 0.80
*) Calculated at 32 °C condensing temperature

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 13

Data sheet | Thermostatic expansion valves, type T2 / TE2

Capacity Capacity in kW, range B, -60 °C to -25 °C, opening superheat sh= 6 K R404A
Evaporating [°C]
Cond. temp.
Valve type Orifice no. -60 -50 -40 -30
[°C]
Capacity [kW]
T2 / TE2 0X 0.44 0.51 0.58 0.63
T2 / TE2 00 0.50 0.65 0.83 1.02
T2 / TE2 01 0.68 0.90 1.22 1.62
T2 / TE2 02 0.75 1.00 1.39 1.91
25
T2 / TE2 03 1.22 1.64 2.30 3.22
T2 / TE2 04 1.69 2.31 3.23 4.46
T2 / TE2 05 2.20 3.02 4.22 5.82
T2 / TE2 06 2.60 3.55 4.98 6.92

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -60 -50 -40 -30
[°C]
Capacity [kW]
T2 / TE2 0X 0.41 0.49 0.56 0.62
T2 / TE2 00 0.47 0.61 0.80 1.00
T2 / TE2 01 0.64 0.86 1.18 1.59
T2 / TE2 02 0.70 0.96 1.34 1.88
35
T2 / TE2 03 1.16 1.58 2.24 3.18
T2 / TE2 04 1.72 2.31 3.22 4.47
T2 / TE2 05 2.23 3.01 4.19 5.83
T2 / TE2 06 2.63 3.51 4.90 6.87

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -60 -50 -40 -30
[°C]
Capacity [kW]
T2 / TE2 0X 0.36 0.44 0.52 0.58
T2 / TE2 00 0.41 0.55 0.73 0.93
T2 / TE2 01 0.56 0.77 1.08 1.48
T2 / TE2 02 0.63 0.86 1.23 1.76
45
T2 / TE2 03 1.04 1.44 2.07 2.99
T2 / TE2 04 1.68 2.20 3.04 4.23
T2 / TE2 05 2.16 2.84 3.94 5.52
T2 / TE2 06 2.57 3.30 4.57 6.46

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -60 -50 -40 -30
[°C]
Capacity [kW]
T2 / TE2 0X 0.29 0.36 0.44 0.50
T2 / TE2 00 0.33 0.46 0.62 0.81
T2 / TE2 01 0.46 0.64 0.92 1.29
T2 / TE2 02 0.51 0.73 1.06 1.54
55
T2 / TE2 03 0.86 1.22 1.80 2.65
T2 / TE2 04 1.56 1.96 2.67 3.73
T2 / TE2 05 1.98 2.50 3.44 4.85
T2 / TE2 06 2.39 2.93 3.97 5.63

Subcooling correction factor 'fsub'

Subcooling [K] 2 4 10 15 20 25 30 35 40 45 50
Correction factor 0.97 1.00 1.10 1.19 1.27 1.35 1.43 1.52 1.60 1.68 1.76
Distributer correction factor 'fp' *)
Pressure drop Evaporating [°C]
[bar] -60 -55 -50 -45 -40 -35 -30 -25
0 1 1 1 1 1 1 1 1
“Pressure 1 0.97 0.96 0.96 0.96 0.96 0.96 0.96 0.96
drop
1.5 0.95 0.95 0.95 0.94 0.94 0.94 0.94 0.94
[bar]”
2 0.93 0.93 0.93 0.93 0.92 0.92 0.92 0.92
*) Calculated at 32 °C condensing temperature

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 14

Data sheet | Thermostatic expansion valves, type T2 / TE2

Capacity Capacity in kW, range N -40 °C to 10 °C. Opening superheat sh= 6 K R407F
Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.84 0.92 0.96 0.98 0.95 0.86
T2 / TE2 00 1.1 1.4 1.6 1.8 1.8 1.7
T2 / TE2 01 1.6 2.0 2.6 3.1 3.6 3.6
T2 / TE2 02 1.8 2.3 3.0 3.9 4.8 5.1
25
T2 / TE2 03 2.9 3.9 5.1 6.6 8.1 8.7
T2 / TE2 04 4.3 5.6 7.4 9.6 12.2 14.0
T2 / TE2 05 5.6 7.4 9.7 12.7 16.1 18.1
T2 / TE2 06 6.6 8.7 11.6 15.2 19.3 21.5

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.85 0.93 0.99 1.0 1.0 0.98
T2 / TE2 00 1.1 1.4 1.6 1.9 2.0 2.0
T2 / TE2 01 1.6 2.1 2.7 3.3 3.9 4.1
T2 / TE2 02 1.8 2.4 3.1 4.1 5.2 5.9
35
T2 / TE2 03 3.0 4.0 5.3 7.0 8.8 10.0
T2 / TE2 04 4.4 5.8 7.7 10.2 13.3 16.0
T2 / TE2 05 5.8 7.6 10.1 13.5 17.5 20.9
T2 / TE2 06 6.7 9.0 12.0 16.1 21.0 24.8

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.83 0.92 0.99 1.0 1.1 1.0
T2 / TE2 00 1.1 1.4 1.6 1.9 2.0 2.1
T2 / TE2 01 1.5 2.0 2.6 3.3 4.0 4.4
T2 / TE2 02 1.8 2.3 3.1 4.1 5.3 6.3
45
T2 / TE2 03 3.0 4.0 5.3 7.1 9.1 10.7
T2 / TE2 04 4.4 5.9 7.8 10.4 13.8 17.1
T2 / TE2 05 5.8 7.6 10.2 13.8 18.3 22.4
T2 / TE2 06 6.7 8.9 12.1 16.4 21.9 26.6

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.79 0.89 0.96 1.0 1.0 1.0
T2 / TE2 00 1.0 1.3 1.6 1.8 2.0 2.1
T2 / TE2 01 1.5 2.0 2.6 3.3 3.9 4.4
T2 / TE2 02 1.7 2.3 3.0 4.1 5.3 6.4
55
T2 / TE2 03 2.9 3.8 5.2 7.0 9.1 10.9
T2 / TE2 04 4.3 5.7 7.7 10.3 13.8 17.4
T2 / TE2 05 5.6 7.5 10.1 13.7 18.4 22.9
T2 / TE2 06 6.5 8.7 11.9 16.3 22.1 27.4

Subcooling correction factor 'fsub'

Subcooling [K] 1 4 10 15 20 25 30 35 40 45 50
Correction factor 0.96 1.00 1.07 1.14 1.20 1.26 1.33 1.40 1.47 1.54 1.65
Distributer correction factor 'fp' *)
Pressure drop Evaporating [°C]
[bar] -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15
0 1 1 1 1 1 1 1 1 1 1 1 1
“Pressure 1 1.00 0.93 0.91 0.88 0.87 0.82 0.79 0.76 0.73 0.69 0.65 0.91
drop
[bar]” 1.5 1.04 0.91 0.88 0.84 0.82 0.77 0.74 0.69 0.64 0.60 0.57 0.86
2 1.07 0.93 0.85 0.81 0.77 0.72 0.67 0.63 0.58 0.54 0.50 0.80
*) Calculated at 32 °C condensing temperature

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 15

Data sheet | Thermostatic expansion valves, type T2 / TE2

Capacity Capacity in kW, range N -40 °C to 10 °C. Opening superheat sh= 6 K R407A
Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.74 0.81 0.86 0.87 0.85 0.77
T2 / TE2 00 0.97 1.2 1.4 1.6 1.7 1.6
T2 / TE2 01 1.4 1.8 2.3 2.8 3.2 3.2
T2 / TE2 02 1.6 2.1 2.7 3.5 4.3 4.6
25
T2 / TE2 03 2.6 3.4 4.6 5.9 7.3 7.8
T2 / TE2 04 3.8 5.0 6.6 8.6 11.0 12.6
T2 / TE2 05 5.0 6.5 8.6 11.4 14.5 16.4
T2 / TE2 06 5.8 7.7 10.3 13.6 17.3 19.4

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.74 0.82 0.88 0.91 0.91 0.88
T2 / TE2 00 0.97 1.2 1.4 1.7 1.8 1.8
T2 / TE2 01 1.4 1.8 2.3 2.9 3.4 3.7
T2 / TE2 02 1.6 2.1 2.8 3.6 4.6 5.3
35
T2 / TE2 03 2.6 3.5 4.7 6.2 7.8 9.0
T2 / TE2 04 3.9 5.1 6.8 9.0 11.9 14.4
T2 / TE2 05 5.0 6.7 8.9 12.0 15.7 18.7
T2 / TE2 06 5.9 7.9 10.6 14.3 18.8 22.2

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.72 0.80 0.87 0.91 0.93 0.92
T2 / TE2 00 0.94 1.2 1.4 1.7 1.8 1.9
T2 / TE2 01 1.3 1.8 2.3 2.9 3.5 3.9
T2 / TE2 02 1.5 2.0 2.7 3.7 4.7 5.6
45
T2 / TE2 03 2.6 3.4 4.6 6.2 8.1 9.5
T2 / TE2 04 3.8 5.1 6.8 9.2 12.2 15.2
T2 / TE2 05 5.0 6.6 8.9 12.1 16.2 19.9
T2 / TE2 06 5.8 7.8 10.6 14.5 19.4 23.7

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.67 0.76 0.83 0.88 0.91 0.92
T2 / TE2 00 0.88 1.1 1.4 1.6 1.8 1.9
T2 / TE2 01 1.3 1.7 2.2 2.8 3.5 3.9
T2 / TE2 02 1.4 1.9 2.6 3.5 4.6 5.6
55
T2 / TE2 03 2.4 3.3 4.5 6.1 8.0 9.6
T2 / TE2 04 3.7 4.9 6.6 9.0 12.1 15.4
T2 / TE2 05 4.8 6.4 8.7 11.9 16.1 20.3
T2 / TE2 06 5.5 7.5 10.3 14.2 19.4 24.2

Subcooling correction factor 'fsub'

Subcooling [K] 1 4 10 15 20 25 30 35 40 45 50
Correction factor 0.96 1.00 1.08 1.14 1.21 1.28 1.35 1.42 1.50 1.57 1.65
Distributer correction factor 'fp' *)
Pressure drop Evaporating [°C]
[bar] -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15
0 1 1 1 1 1 1 1 1 1 1 1 1
“Pressure 1 0.97 0.93 0.92 0.89 0.86 0.83 0.80 0.78 0.74 0.72 0.67 0.91
drop
[bar]” 1.5 1.01 0.92 0.88 0.85 0.81 0.78 0.73 0.71 0.67 0.63 0.59 0.86
2 1.01 0.90 0.86 0.82 0.77 0.74 0.69 0.63 0.59 0.56 0.52 0.80
*) Calculated at 32 °C condensing temperature

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 16

Data sheet | Thermostatic expansion valves, type T2 / TE2

Capacity Capacity in kW, range N -40 °C to 10 °C. Opening superheat sh= 6 K R448A
Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.77 0.83 0.87 0.88 0.86 0.79
T2 / TE2 00 1.05 1.25 1.44 1.60 1.67 1.59
T2 / TE2 01 1.51 1.90 2.35 2.82 3.19 3.25
T2 / TE2 02 1.72 2.19 2.78 3.50 4.22 4.58
25
T2 / TE2 03 2.86 3.65 4.67 5.90 7.14 7.73
T2 / TE2 04 4.17 5.30 6.77 8.67 10.9 12.4
T2 / TE2 05 5.45 6.93 8.87 11.3 14.1 15.8
T2 / TE2 06 6.45 8.26 10.6 13.7 17.1 19.1

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.77 0.84 0.89 0.92 0.93 0.90
T2 / TE2 00 1.05 1.26 1.48 1.67 1.79 1.81
T2 / TE2 01 1.51 1.91 2.40 2.94 3.43 3.70
T2 / TE2 02 1.72 2.21 2.84 3.64 4.54 5.23
35
T2 / TE2 03 2.88 3.70 4.78 6.16 7.70 8.87
T2 / TE2 04 4.24 5.42 6.99 9.08 11.7 14.1
T2 / TE2 05 5.53 7.08 9.15 11.9 15.2 18.1
T2 / TE2 06 6.52 8.40 10.9 14.3 18.5 22.0

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.75 0.82 0.88 0.93 0.95 0.94
T2 / TE2 00 1.01 1.23 1.46 1.67 1.83 1.90
T2 / TE2 01 1.47 1.87 2.37 2.94 3.51 3.90
T2 / TE2 02 1.67 2.16 2.81 3.65 4.64 5.52
45
T2 / TE2 03 2.82 3.64 4.75 6.20 7.91 9.41
T2 / TE2 04 4.20 5.39 6.99 9.18 12.0 14.9
T2 / TE2 05 5.47 7.03 9.16 12.0 15.7 19.2
T2 / TE2 06 6.41 8.31 10.9 14.5 19.0 23.4

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.70 0.78 0.84 0.89 0.93 0.94
T2 / TE2 00 0.95 1.17 1.39 1.61 1.79 1.89
T2 / TE2 01 1.38 1.77 2.26 2.84 3.44 3.90
T2 / TE2 02 1.58 2.06 2.70 3.54 4.56 5.54
55
T2 / TE2 03 2.68 3.49 4.59 6.04 7.82 9.51
T2 / TE2 04 4.06 5.23 6.82 9.01 11.9 15.1
T2 / TE2 05 5.26 6.81 8.92 11.8 15.6 19.4
T2 / TE2 06 6.13 8.00 10.6 14.2 19.0 23.8

Subcooling correction factor 'fsub'

Subcooling [K] 2 4 10 15 20 25 30 35 40 45 50
Correction factor 0.98 1.00 1.07 1.13 1.19 1.25 1.31 1.37 1.42 1.48 1.54
Distributer correction factor 'fp' *)
Pressure drop Evaporating [°C]
[bar] -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15
0 1 1 1 1 1 1 1 1 1 1 1 1
“Pressure 1 0.96 0.96 0.96 0.96 0.96 0.96 0.96 0.95 0.95 0.94 0.94 0.93
drop
[bar]” 1.5 0.95 0.94 0.94 0.94 0.94 0.94 0.93 0.93 0.92 0.92 0.90 0.89
2 0.93 0.93 0.92 0.92 0.92 0.92 0.91 0.90 0.90 0.89 0.87 0.85
*) Calculated at 32 °C condensing temperature

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 17

Data sheet | Thermostatic expansion valves, type T2 / TE2

Capacity Capacity in kW. range N -40 °C to 10 °C. Opening superheat sh= 6 K R449A
Evaporating [°C]
Cond. temp. -40 -30 -20 -10 0 10
Valve type Orifice no.
[°C]
Capacity [kW]
T2 / TE2 0X 0.76 0.82 0.85 0.87 0.85 0.78
T2 / TE2 00 1.05 1.24 1.42 1.57 1.63 1.56
T2 / TE2 01 1.53 1.90 2.32 2.76 3.12 3.17
T2 / TE2 02 1.74 2.19 2.76 3.43 4.11 4.45
25
T2 / TE2 03 2.91 3.66 4.63 5.79 6.95 7.52
T2 / TE2 04 4.24 5.33 6.75 8.54 10.6 12.0
T2 / TE2 05 5.55 6.98 8.84 11.2 13.7 15.3
T2 / TE2 06 6.59 8.32 10.6 13.5 16.6 18.5

Evaporating [°C]
Cond. temp. -40 -30 -20 -10 0 10
Valve type Orifice no.
[°C]
Capacity [kW]
T2 / TE2 0X 0.76 0.82 0.87 0.90 0.91 0.88
T2 / TE2 00 1.05 1.25 1.45 1.63 1.75 1.77
T2 / TE2 01 1.53 1.91 2.36 2.87 3.34 3.61
T2 / TE2 02 1.74 2.20 2.81 3.56 4.40 5.07
35
T2 / TE2 03 2.92 3.70 4.73 6.03 7.48 8.60
T2 / TE2 04 4.30 5.43 6.93 8.92 11.4 13.6
T2 / TE2 05 5.61 7.10 9.09 11.67 14.8 17.4
T2 / TE2 06 6.63 8.43 10.9 14.1 17.9 21.2

Evaporating [°C]
Cond. temp. -40 -30 -20 -10 0 10
Valve type Orifice no.
[°C]
Capacity [kW]
T2 / TE2 0X 0.74 0.81 0.87 0.91 0.93 0.93
T2 / TE2 00 1.01 1.22 1.43 1.63 1.79 1.86
T2 / TE2 01 1.48 1.86 2.33 2.87 3.41 3.80
T2 / TE2 02 1.69 2.15 2.77 3.56 4.49 5.35
45
T2 / TE2 03 2.84 3.63 4.68 6.05 7.66 9.10
T2 / TE2 04 4.23 5.37 6.91 8.99 11.6 14.4
T2 / TE2 05 5.51 7.02 9.06 11.8 15.2 18.5
T2 / TE2 06 6.49 8.31 10.8 14.2 18.4 22.6

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.69 0.76 0.82 0.87 0.91 0.92
T2 / TE2 00 0.95 1.15 1.36 1.57 1.74 1.85
T2 / TE2 01 1.39 1.76 2.22 2.76 3.34 3.80
T2 / TE2 02 1.59 2.04 2.64 3.44 4.41 5.36
55
T2 / TE2 03 2.69 3.46 4.49 5.87 7.54 9.15
T2 / TE2 04 4.06 5.18 6.71 8.78 11.5 14.5
T2 / TE2 05 5.27 6.76 8.78 11.5 15.0 18.7
T2 / TE2 06 6.17 7.96 10.4 13.9 18.3 22.9

Subcooling correction factor 'fsub'

Subcooling [K] 2 4 10 15 20 25 30 35 40 45 50
Correction factor 0.98 1.00 1.07 1.13 1.19 1.25 1.31 1.37 1.43 1.49 1.55
Distributer correction factor 'fp' *)
Pressure drop Evaporating [°C]
[bar] -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15
0 1 1 1 1 1 1 1 1 1 1 1 1
“Pressure 1 0.96 0.96 0.96 0.96 0.96 0.96 0.96 0.95 0.95 0.94 0.94 0.93
drop
[bar]” 1.5 0.95 0.94 0.94 0.94 0.94 0.94 0.93 0.93 0.92 0.91 0.90 0.89
2 0.93 0.93 0.92 0.92 0.92 0.91 0.91 0.90 0.90 0.88 0.87 0.84
*) Calculated at 32 °C condensing temperature

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 18

Data sheet | Thermostatic expansion valves, type T2 / TE2

Capacity Capacity in kW. range N -40 °C to 10 °C. Opening superheat sh= 6 K R452A
Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.57 0.63 0.68 0.70 0.68 0.60
T2 / TE2 00 0.75 0.96 1.15 1.29 1.32 1.22
T2 / TE2 01 1.05 1.45 1.91 2.35 2.60 2.53
T2 / TE2 02 1.17 1.66 2.29 2.98 3.53 3.64
25
T2 / TE2 03 1.94 2.78 3.85 5.04 5.97 6.11
T2 / TE2 04 2.79 4.01 5.66 7.60 9.27 9.80
T2 / TE2 05 3.66 5.28 7.45 10.0 12.2 12.7
T2 / TE2 06 4.33 6.27 8.89 12.0 14.5 15.0

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.54 0.62 0.68 0.71 0.73 0.69
T2 / TE2 00 0.70 0.93 1.14 1.33 1.44 1.41
T2 / TE2 01 0.99 1.40 1.89 2.42 2.83 2.95
T2 / TE2 02 1.12 1.61 2.27 3.08 3.86 4.26
35
T2 / TE2 03 1.86 2.70 3.84 5.24 6.56 7.18
T2 / TE2 04 2.72 3.94 5.67 7.92 10.2 11.6
T2 / TE2 05 3.56 5.17 7.46 10.4 13.4 15.0
T2 / TE2 06 4.19 6.12 8.87 12.5 16.1 17.8

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.49 0.57 0.64 0.69 0.73 0.73
T2 / TE2 00 0.64 0.85 1.07 1.28 1.44 1.49
T2 / TE2 01 0.91 1.29 1.78 2.34 2.85 3.11
T2 / TE2 02 1.03 1.49 2.14 2.99 3.90 4.51
45
T2 / TE2 03 1.72 2.52 3.64 5.11 6.68 7.65
T2 / TE2 04 2.56 3.70 5.39 7.73 10.4 12.4
T2 / TE2 05 3.35 4.86 7.09 10.2 13.8 16.2
T2 / TE2 06 3.91 5.72 8.40 12.2 16.5 19.2

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.42 0.51 0.58 0.63 0.67 0.69
T2 / TE2 00 0.56 0.75 0.95 1.15 1.32 1.42
T2 / TE2 01 0.79 1.14 1.58 2.11 2.63 2.97
T2 / TE2 02 0.91 1.32 1.91 2.71 3.62 4.31
55
T2 / TE2 03 1.53 2.24 3.25 4.65 6.24 7.35
T2 / TE2 04 2.33 3.33 4.82 7.00 9.70 11.9
T2 / TE2 05 3.04 4.36 6.35 9.26 12.9 15.7
T2 / TE2 06 3.53 5.11 7.50 11.0 15.5 18.7

Subcooling correction factor 'fsub'

Subcooling [K] 2 4 10 15 20 25 30 35 40 45 50
Correction factor 0.97 1.00 1.09 1.16 1.23 1.30 1.38 1.45 1.52 1.59 1.66
Distributer correction factor 'fp' *)
Pressure drop Evaporating [°C]
[bar] -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15
0 1 1 1 1 1 1 1 1 1 1 1 1
“Pressure 1 0.96 0.96 0.96 0.96 0.96 0.96 0.96 0.95 0.95 0.94 0.94 0.92
drop
[bar]” 1.5 0.95 0.95 0.94 0.94 0.94 0.94 0.93 0.93 0.92 0.91 0.90 0.88
2 0.93 0.93 0.93 0.92 0.92 0.92 0.91 0.90 0.90 0.88 0.87 0.84
*) Calculated at 32 °C condensing temperature

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 19

Data sheet | Thermostatic expansion valves, type T2 / TE2

Capacity Capacity in kW. range N -40 °C to 10 °C. Opening superheat sh= 6 K R454C
Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.60 0.68 0.73 0.76 0.75 0.71
T2 / TE2 00 0.73 0.93 1.1 1.3 1.4 1.4
T2 / TE2 01 1.0 1.3 1.7 2.2 2.6 2.7
T2 / TE2 02 1.1 1.5 2.0 2.6 3.3 3.7
25
T2 / TE2 03 1.9 2.5 3.4 4.4 5.5 6.3
T2 / TE2 04 2.8 3.7 4.9 6.4 8.2 9.8
T2 / TE2 05 3.5 4.7 6.2 8.1 10.4 12.3
T2 / TE2 06 4.3 5.8 7.6 10.0 12.9 15.4

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.59 0.68 0.74 0.79 0.80 0.78
T2 / TE2 00 0.71 0.92 1.1 1.3 1.5 1.5
T2 / TE2 01 0.99 1.3 1.8 2.2 2.7 3.0
T2 / TE2 02 1.1 1.5 2.0 2.7 3.4 4.1
35
T2 / TE2 03 1.9 2.5 3.4 4.5 5.8 7.0
T2 / TE2 04 2.8 3.7 5.0 6.6 8.6 10.8
T2 / TE2 05 3.5 4.7 6.3 8.4 11.0 13.7
T2 / TE2 06 4.3 5.8 7.7 10.3 13.6 17.1

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.56 0.65 0.73 0.78 0.81 0.81
T2 / TE2 00 0.68 0.88 1.1 1.3 1.5 1.6
T2 / TE2 01 0.94 1.3 1.7 2.2 2.7 3.1
T2 / TE2 02 1.1 1.5 2.0 2.6 3.4 4.3
45
T2 / TE2 03 1.8 2.5 3.3 4.5 5.8 7.3
T2 / TE2 04 2.7 3.6 4.9 6.5 8.7 11.2
T2 / TE2 05 3.4 4.6 6.2 8.3 11.1 14.2
T2 / TE2 06 4.1 5.6 7.6 10.3 13.8 17.8

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.51 0.61 0.68 0.74 0.78 0.80
T2 / TE2 00 0.62 0.82 1.0 1.3 1.4 1.6
T2 / TE2 01 0.86 1.2 1.6 2.1 2.6 3.1
T2 / TE2 02 0.97 1.4 1.9 2.5 3.3 4.2
55
T2 / TE2 03 1.6 2.3 3.1 4.3 5.7 7.2
T2 / TE2 04 2.5 3.4 4.7 6.3 8.5 11.1
T2 / TE2 05 3.1 4.3 5.9 8.0 10.8 14.1
T2 / TE2 06 3.8 5.2 7.2 9.8 13.4 17.6

Subcooling correction factor 'fsub'

Subcooling [K] 2 4 10 15 20 25 30 35 40 45 50
Correction factor 0.98 1.00 1.07 1.13 1.19 1.25 1.33 1.39 1.45 1.51 1.58
Distributer correction factor 'fp' *)
Pressure drop Evaporating [°C]
[bar] -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15
0 1 1 1 1 1 1 1 1 1 1 1 1
“Pressure 1 0.96 0.96 0.96 0.96 0.96 0.96 0.95 0.95 0.95 0.94 0.93 0.92
drop
[bar]” 1.5 0.94 0.94 0.94 0.94 0.94 0.93 0.93 0.93 0.92 0.91 0.90 0.88
2 0.92 0.92 0.92 0.92 0.91 0.91 0.90 0.90 0.89 0.88 0.87 0.84
*) Calculated at 32 °C condensing temperature

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 20

Data sheet | Thermostatic expansion valves, type T2 / TE2

Capacity Capacity in kW. range N -40 °C to 10 °C. Opening superheat sh= 6 K R455A
Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.68 0.76 0.82 0.85 0.85 0.81
T2 / TE2 00 0.84 1.1 1.3 1.5 1.6 1.6
T2 / TE2 01 1.2 1.6 2.1 2.6 3.1 3.3
T2 / TE2 02 1.3 1.8 2.4 3.2 4.0 4.7
25
T2 / TE2 03 2.2 3.0 4.0 5.3 6.8 8.0
T2 / TE2 04 3.3 4.4 5.8 7.7 10.2 12.7
T2 / TE2 05 4.1 5.5 7.4 9.8 13.0 15.9
T2 / TE2 06 4.9 6.7 9.0 12.1 16.2 19.8

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.66 0.75 0.83 0.87 0.89 0.87
T2 / TE2 00 0.82 1.1 1.3 1.5 1.7 1.7
T2 / TE2 01 1.2 1.6 2.1 2.6 3.2 3.6
T2 / TE2 02 1.3 1.8 2.4 3.2 4.2 5.1
35
T2 / TE2 03 2.2 3.0 4.0 5.4 7.1 8.6
T2 / TE2 04 3.3 4.4 5.9 7.9 10.6 13.6
T2 / TE2 05 4.1 5.5 7.4 10.0 13.5 17.1
T2 / TE2 06 4.9 6.6 9.0 12.4 16.8 21.4

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.63 0.72 0.80 0.86 0.89 0.89
T2 / TE2 00 0.77 1.0 1.3 1.5 1.7 1.8
T2 / TE2 01 1.1 1.5 2.0 2.6 3.2 3.6
T2 / TE2 02 1.2 1.7 2.3 3.1 4.1 5.1
45
T2 / TE2 03 2.1 2.9 3.9 5.3 7.1 8.8
T2 / TE2 04 3.1 4.3 5.7 7.8 10.5 13.8
T2 / TE2 05 3.9 5.3 7.3 9.9 13.5 17.5
T2 / TE2 06 4.6 6.4 8.8 12.2 16.9 21.9

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.57 0.67 0.75 0.81 0.85 0.87
T2 / TE2 00 0.70 0.93 1.2 1.4 1.6 1.7
T2 / TE2 01 0.99 1.4 1.9 2.4 3.0 3.6
T2 / TE2 02 1.1 1.6 2.2 3.0 4.0 5.0
55
T2 / TE2 03 1.9 2.7 3.7 5.1 6.8 8.6
T2 / TE2 04 2.9 4.0 5.5 7.5 10.2 13.5
T2 / TE2 05 3.6 5.0 6.9 9.5 13.1 17.2
T2 / TE2 06 4.2 6.0 8.3 11.7 16.4 21.6

Subcooling correction factor 'fsub'

Subcooling [K] 2 4 10 15 20 25 30 35 40 45 50
Correction factor 0.98 1.00 1.07 1.13 1.19 1.25 1.33 1.39 1.45 1.52 1.58
Distributer correction factor 'fp' *)
Pressure drop Evaporating [°C]
[bar] -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15
0 1 1 1 1 1 1 1 1 1 1 1 1
“Pressure 1 0.97 0.97 0.97 0.96 0.96 0.96 0.96 0.96 0.96 0.95 0.95 0.94
drop
[bar]” 1.5 0.95 0.95 0.95 0.95 0.95 0.94 0.94 0.94 0.93 0.93 0.92 0.91
2 0.93 0.93 0.93 0.93 0.93 0.92 0.92 0.92 0.91 0.90 0.89 0.88
*) Calculated at 32 °C condensing temperature

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 21

Data sheet | Thermostatic expansion valves, type T2 / TE2

Capacity Capacity in kW. range N -40 °C to 10 °C. Opening superheat sh= 6 K R1234yf
Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.34 0.39 0.44 0.46 0.46 0.41
T2 / TE2 00 0.37 0.49 0.61 0.72 0.78 0.75
T2 / TE2 01 0.50 0.68 0.89 1.1 1.3 1.4
T2 / TE2 02 0.56 0.76 1.0 1.3 1.6 1.7
25
T2 / TE2 03 0.94 1.3 1.7 2.2 2.7 2.9
T2 / TE2 04 1.4 1.9 2.5 3.2 3.9 4.3
T2 / TE2 05 1.7 2.4 3.2 4.1 5.0 5.5
T2 / TE2 06 2.2 2.9 3.9 5.0 6.2 6.8

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.33 0.39 0.45 0.49 0.50 0.49
T2 / TE2 00 0.37 0.49 0.62 0.75 0.86 0.90
T2 / TE2 01 0.50 0.68 0.91 1.2 1.4 1.6
T2 / TE2 02 0.55 0.76 1.0 1.4 1.7 2.1
35
T2 / TE2 03 0.93 1.3 1.7 2.3 2.9 3.5
T2 / TE2 04 1.4 1.9 2.5 3.4 4.3 5.2
T2 / TE2 05 1.8 2.4 3.2 4.3 5.5 6.6
T2 / TE2 06 2.2 3.0 4.0 5.3 6.8 8.3

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.31 0.38 0.44 0.49 0.52 0.53
T2 / TE2 00 0.35 0.47 0.61 0.75 0.88 0.97
T2 / TE2 01 0.47 0.65 0.88 1.2 1.5 1.8
T2 / TE2 02 0.53 0.73 1.0 1.4 1.8 2.2
45
T2 / TE2 03 0.89 1.2 1.7 2.3 3.0 3.7
T2 / TE2 04 1.3 1.8 2.5 3.4 4.4 5.6
T2 / TE2 05 1.7 2.3 3.2 4.3 5.6 7.2
T2 / TE2 06 2.1 2.9 3.9 5.3 7.0 8.9

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.28 0.35 0.42 0.47 0.51 0.53
T2 / TE2 00 0.31 0.43 0.57 0.72 0.86 0.98
T2 / TE2 01 0.42 0.60 0.83 1.1 1.4 1.8
T2 / TE2 02 0.48 0.68 0.95 1.3 1.7 2.2
55
T2 / TE2 03 0.81 1.1 1.6 2.2 2.9 3.8
T2 / TE2 04 1.2 1.7 2.4 3.2 4.3 5.7
T2 / TE2 05 1.6 2.2 3.0 4.1 5.5 7.2
T2 / TE2 06 1.9 2.7 3.7 5.1 6.8 9.0

Subcooling correction factor 'fsub'

Subcooling [K] 2 4 10 15 20 25 30 35 40 45 50
Correction factor 0.97 1.00 1.08 1.14 1.20 1.26 1.35 1.41 1.48 1.54 1.60
Distributer correction factor 'fp' *)
Pressure drop Evaporating [°C]
[bar] -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15
0 1 1 1 1 1 1 1 1 1 1 1 1
“Pressure 1 0.93 0.93 0.93 0.93 0.92 0.92 0.91 0.91 0.90 0.88 0.86 0.83
drop
[bar]” 1.5 0.90 0.89 0.89 0.89 0.88 0.88 0.87 0.86 0.84 0.82 0.78 0.73
2 0.86 0.86 0.85 0.85 0.84 0.83 0.82 0.80 0.78 0.75 0.70 0.61
*) Calculated at 32 °C condensing temperature

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 22

Data sheet | Thermostatic expansion valves, type T2 / TE2

Capacity Capacity in kW, range N, -40°C to 10°C, opening superheat sh= 6 K R513A
Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.39 0.46 0.51 0.54 0.53 0.47
T2 / TE2 00 0.42 0.55 0.70 0.83 0.91 0.86
T2 / TE2 01 0.55 0.76 1.0 1.3 1.5 1.6
T2 / TE2 02 0.62 0.85 1.1 1.5 1.8 2.0
25
T2 / TE2 03 1.0 1.4 1.9 2.5 3.1 3.3
T2 / TE2 04 1.5 2.1 2.8 3.6 4.5 5.0
T2 / TE2 05 1.9 2.6 3.5 4.6 5.7 6.4
T2 / TE2 06 2.4 3.2 4.4 5.7 7.1 7.9

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.39 0.46 0.52 0.57 0.59 0.58
T2 / TE2 00 0.41 0.56 0.72 0.88 1.0 1.1
T2 / TE2 01 0.55 0.77 1.0 1.4 1.7 1.9
T2 / TE2 02 0.61 0.86 1.2 1.6 2.0 2.4
35
T2 / TE2 03 1.0 1.4 2.0 2.6 3.4 4.1
T2 / TE2 04 1.5 2.1 2.9 3.9 5.0 6.2
T2 / TE2 05 2.0 2.7 3.7 4.9 6.4 7.8
T2 / TE2 06 2.4 3.3 4.5 6.1 7.9 9.8

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.37 0.45 0.51 0.57 0.61 0.62
T2 / TE2 00 0.40 0.54 0.71 0.88 1.0 1.2
T2 / TE2 01 0.54 0.75 1.0 1.4 1.7 2.1
T2 / TE2 02 0.60 0.84 1.2 1.6 2.1 2.6
45
T2 / TE2 03 1.0 1.4 2.0 2.7 3.5 4.5
T2 / TE2 04 1.5 2.1 2.9 3.9 5.2 6.7
T2 / TE2 05 2.0 2.7 3.7 5.0 6.7 8.5
T2 / TE2 06 2.4 3.3 4.6 6.2 8.3 10.7

Evaporating [°C]
Cond. temp.
Valve type Orifice no. -40 -30 -20 -10 0 10
[°C]
Capacity [kW]
T2 / TE2 0X 0.35 0.42 0.49 0.55 0.59 0.63
T2 / TE2 00 0.38 0.52 0.68 0.85 1.0 1.2
T2 / TE2 01 0.51 0.72 0.99 1.3 1.7 2.1
T2 / TE2 02 0.57 0.81 1.1 1.6 2.1 2.7
55
T2 / TE2 03 0.98 1.4 1.9 2.6 3.5 4.6
T2 / TE2 04 1.5 2.1 2.9 3.9 5.2 6.8
T2 / TE2 05 1.9 2.7 3.7 5.0 6.6 8.7
T2 / TE2 06 2.3 3.2 4.5 6.1 8.2 10.8

Subcooling correction factor 'fsub'

Subcooling [K] 2 4 10 15 20 25 30 35 40 45 50
Correction factor 0.98 1.00 1.07 1.13 1.18 1.24 1.31 1.37 1.43 1.49 1.55
Distributer correction factor 'fp' *)
Pressure drop Evaporating [°C]
[bar] -40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15
0 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00
“Pressure 1 0.94 0.93 0.93 0.93 0.93 0.92 0.92 0.91 0.90 0.89 0.87 0.84
drop
[bar]” 1.5 0.90 0.90 0.90 0.89 0.89 0.88 0.88 0.86 0.85 0.83 0.80 0.75
2 0.87 0.86 0.86 0.85 0.85 0.84 0.83 0.81 0.79 0.77 0.72 0.64
*) Calculated at 32 °C condensing temperature

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 23

Dimensions and weights T2 and TE2

Flare × flare
All dimentions are in mm

Flare × solder
All dimentions are in mm

Outlet Equalization Weight

A B [kg / lb]
Flare × flare / ” flare
1 2
/ ” flare
1 4
0.3 / 0.7
/ ” solder
1 2
/ ” solder
1 4
Flare × solder 0.3 / 0.7
12 mm solder 6 mm solder

Solder ODF Weight

[in] [mm] [kg / lb]
/
1 4
6 0.05 / 0.11
/
3 8
10 0.05 / 0.11

Solder adaptor

© Danfoss | DCS (rm) | 2020.07 AI241486443133en-001302 | 24