Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 113 views

    FPS-09 - Tee Recta PDF

    Uploaded by

    Oscar Amval
    This document provides specifications for grooved tees and crosses made of ductile iron. It lists the sizes available from 25mm to 300mm, with working pressures up to 20 bar or 300 psi depending on the pipe material. The pipe material is ductile iron with a red enamel coating. Dimensions and weights are provided for standard tees, crosses, and elbows in various sizes. A warranty information section states that Lede products are warranted to be free of defects in materials and workmanship.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    FPS-09 - Tee Recta PDF

    Uploaded by

    Oscar Amval
    113 views2 pages
    This document provides specifications for grooved tees and crosses made of ductile iron. It lists the sizes available from 25mm to 300mm, with working pressures up to 20 bar or 300 psi depending on the pipe material. The pipe material is ductile iron with a red enamel coating. Dimensions and weights are provided for standard tees, crosses, and elbows in various sizes. A warranty information section states that Lede products are warranted to be free of defects in materials and workmanship.

    Original Title

    FPS-09- TEE RECTA.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for grooved tees and crosses made of ductile iron. It lists the sizes available from 25mm to 300mm, with working pressures up to 20 bar or 300 psi depending on the pipe material. The pipe material is ductile iron with a red enamel coating. Dimensions and weights are provided for standard tees, crosses, and elbows in various sizes. A warranty information section states that Lede products are warranted to be free of defects in materials and workmanship.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    113 views2 pages

    FPS-09 - Tee Recta PDF

    Uploaded by

    Oscar Amval
    This document provides specifications for grooved tees and crosses made of ductile iron. It lists the sizes available from 25mm to 300mm, with working pressures up to 20 bar or 300 psi depending on the pipe material. The pipe material is ductile iron with a red enamel coating. Dimensions and weights are provided for standard tees, crosses, and elbows in various sizes. A warranty information section states that Lede products are warranted to be free of defects in materials and workmanship.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    GROOVED TEES AND CROSSES

    XGQT03 TEE | XGQT03L STANDARD TEE


    XGQT05 CROSS | 5101 STANDARD CROSS

    SPECIFICATIONS

    Sizes available:
    25 mm - 300 mm / 1’’ ~ 12’’

    Working Pressure:
    Up to 20 bar / 300 psi
    Maximum working pressures are CWP (cold water pressure) MODEL XGQT03L
    or maximum allowed working pressure within the service MODEL XGQT03 TEE STANDARD TEE
    temperature range of the gasket used in the coupling, based
    on standard wall or sch. 7/10/40 steel pipe, cut or
    roll-grooved to ANSI/AWWA C606-04 specifica�ons.
    These ra�ngs may occasionally differ from maximum
    working pressures listed and/or approved by UL, ULC, and/or
    FM as tes�ng condi�ons and test pipes differ. For perfor-
    mance data on other pipe schedules contact Lede.

    Pipe Coating:
    Red Enamel

    Pipe material:
    Cast of Duc�le Iron. MODEL XGQT05 CROSS MODEL 5101
    STANDARD CROSS

    INTERNATIONAL APPROVAL

    ISO 9001:2008

    SUBMITTAL INFORMATION

    PROJECT: CONTRACTOR: DATE:

    SPECIFICATION
    ENGINEER: REFERENCE: SYSTEM TYPE:

    LOCATIONS: COMMENTS:

    www.lede-mexico.com info@lede-mexico.com 800 000 LEDE 1/2


    GROOVED TEES AND CROSSES
    XGQT03 TEE | XGQT03L STANDARD TEE
    XGQT05 CROSS | 5101 STANDARD CROSS
    MODEL XGQT03L STANDARD TEE

    DATA CHART
    C-E

    C-E

    C-E
    TEE CROSS

    Nominal Pipe Max.Working XGQT03 XGQT03L XGQT05 5101


    Size O.D. Pressure SR Straight Tee Tee Cross Standard Cross
    mm/in mm/in Bar/PSI C- E C- E C- E C- E
    25 33.7 20 --- 57 --- 57
    1 1.327 300 --- 2.24 --- 2.24
    32 42.4 20 --- 70 --- 70
    1 1/4 1.669 300 --- 2.76 --- 2.76
    40 48.3 20 --- 70 --- 70
    1 1/2 1.9 300 --- 2.76 --- 2.76
    50 60.3 20 70 84 70 84
    2 2.375 300 2.76 3.31 2.76 3.31
    65 73 20 76 95 76 95
    2 1/2 2.875 300 2.99 3.74 2.99 3.74
    80 88.9 20 85 108 86 108
    3 3.5 300 3.35 4.25 3.39 4.25
    100 114.3 20 102 127 102 127
    4 4.5 300 4.02 5.00 4.02 5.00
    125 141.3 20 121 140 121 140
    5 5.563 300 4.76 5.51 4.76 5.51
    150 168.3 20 130 165 140 165
    6 6.625 300 5.12 6.50 5.51 6.50
    200 219.1 20 175 197 174 197
    8 8.625 300 6.89 7.76 6.85 7.76
    250 273 20 215 229 215 229
    10 10.75 300 8.46 9.02 8.46 9.02
    300 323.9 20 220 254 245 254
    12 12.75 300 8.66 10.00 9.65 10.00

    Weights: Warranty:
    All weights are approximate and subject to change without We warrant all Lede products to be free from defects in
    no�ce. materials and workmanship under normal condi�ons of use
    Lede reserves the right to change or modify product designs, and service. For more informa�on please contact LEDE.
    specifica�ons and/or standard equipment without no�ce
    and without incurring obliga�on.

    Sales:
    Prices and Terms and Condi�ons of Sale are subject to
    change without no�ce.

    www.lede-mexico.com info@lede-mexico.com 800 000 LEDE 2/2

    You might also like