Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Irjet V3i1187 PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056

Volume: 03 Issue: 11 | Nov -2016 www.irjet.net p-ISSN: 2395-0072

Design and Implementation of Smart Door Lock Control System using


Bluetooth Controller of Smart Phone

Bhaktishwar Rajiwade, Shital Thakar, Payal Pokharkar, Shankar Malbhare

Student, Computer Department, SKNSITS, Lonavala ,Pune , Maharashtra, India

---------------------------------------------------------------------***---------------------------------------------------------------------
Abstract - Smart Home is the term commonly used to bluetooth Available with every cellphone. For this we are
design a residence that uses a home controller to integrate the using bluetooth unique ID produced during
residence's different automation system. The most used home manufacturing.This system is reliable and very efficient on
controller. The most popular home controllers are those that the basis of cost and safety.
are connected to a Windows based PC. In this project, Door
locks automation system using Bluetooth-based Android 2. HARDWARE ARCHITECTURE
Smartphone is proposed. In this project we proposed a door
lock system using Bluetooth in a mobile device, it is the small
part of smart home technology, so it will more simple and
complement to use. It also depends on Android platform which
is free open source software. In this project, Door locks
automation system based on Bluetooth-of Android
Smartphone is proposed the system consist of Bluetooth
controller and some hardware, design of a Bluetooth-based
Smartphone application is for lock and unlock the door. The
hardware design for door-lock system is consist of android
smart phone as the task master, Bluetooth module as
command agent, microcontroller as controller center/data
processing center, and solenoid as door lock output.

Key Words: Android, Door Automation, Bluetooth ,


Smart phone ,Microcontroller

1.INTRODUCTION

As per the statistical search of burglary cases happened in


India rate of crime is increasing day by day. In 2013 there is
10 percent increment in burglary cases. In 2012 there is the
8.2 percent crime is due to the home theft so there is a need
to develop some smart door lock system to save our home
from such crime.9 out of 10 burglars avoid home with alarm FIg.1:- Hardware Architecture
system. They would not attack the home try drop the
attempt. These facts encourage us to develop our smart The hardware used is as follows:
system which help us to provide security to residential and
commercial application. There are various ways proposed 2.1 BLUETOOTH HC 05:
and implemented for providing security to home and
commersial appliances using sensors deployment,various This IC is used for controlling and manipulating Bluetooth
transmitters,internet and these methods are commersially connectivity with various smart phones. It’s having following
adopted so popularly.Few of them are NFC based system features:
implemented by Chi-Huang Hung[1],GSM based system It auto-connect to the last device on power as default. It
proposed by Adnan Ibrahim[2].These systems are works permits pairing device to connect as default. The device also
efficinetly bt cosumes a lot efforts for working and provides. Auto-pairing PINCODE:”0000” as default. Auto-
implementing.The GSM module is costlier than While reconnect in 30 min when disconnected as a result of beyond
implementing RFID is complex and doesnot provide comfort the range of connection.
while dealing with. So we are proposing the system based on

© 2016, IRJET | Impact Factor value: 4.45 | ISO 9001:2008 Certified Journal | Page 482
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056
Volume: 03 Issue: 11 | Nov -2016 www.irjet.net p-ISSN: 2395-0072

2.2 MICROCONTROLLER ATMEGA 32 provides instruction to microcontroller. It also manages


Database for visited ID’s for further processing. The android
Microcontroller does the task of signal processing and application mainly consists of user interface for
controlling hardware’s through device drivers. Its having authentication of owner, live video streaming options.
following features: It is High-performance, Low-power
AVR® 8-bit Microcontroller. It comes with 131 Powerful Views of android application is shown below:
Instructions and provides Fully Static Operation and works
on up to 16 MIPS Throughput at 16 MHz .It’s have High
Endurance Non-volatile Memory segments,32K Bytes of In-
System Self-programmable Flash program memory, 2K Bytes
SRAM,1024K Byte Internal EEPROM ,Write/Erase Cycles:
10,000 Flash/100,000 EEPROM

3. SOFTWARE DESIGN IMPLEMENTATION

Admin Registration:

Fig.2: Software design Implementation


Adding Visitors and family members:
Flow of software implementation is according to the above
drawn diagram. The software implementation part mainly
consists of three modules

1. PC application
2. Server and Database management system
3. Android application

The PC application does the work of scanning Bluetooth


controller ID, connections with hardware, live video
streaming, Database connectivity and access provision
options for door lock control.
The server consists of various Bluetooth ID registered and
owners’ connectivity. It matches UUID and accordingly

© 2016, IRJET | Impact Factor value: 4.45 | ISO 9001:2008 Certified Journal | Page 483
International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056
Volume: 03 Issue: 11 | Nov -2016 www.irjet.net p-ISSN: 2395-0072

[5] Yong Tae Park Pranesh Sthapit Jae-Young Pyun“Smart


Digital Door Lock for the Home Automation”, pp.1-
6,2009.

4. CONCLUSIONS

The proposed system is capable of providing higher security


and efficiency to the door lock control system. The system is
lower in cost and efficient while using with its advance
comfort of use. The proposed system is using owner’s
manual identification of users. It can be make smart using
face detection technique. It will be smarter than this one.

ACKNOWLEDGEMENT
It gives us great pleasure in presenting the preliminary
project report on ‘Design and Implementation of Smart Door
Lock Control System Based on a Bluetooth Controller of a
Smart phone’. I would like to take this opportunity to thank
my internal guide Prof. Kalpana Kadam for giving me all the
help and guidance I needed. I am really grateful to them for
their kind support. Their valuable suggestions were very
helpful.
.

REFERENCES

[1] Chi-Huang Hung , Ying-Wen Bai, Je-Hong Ren, “Design


and Implementation of a Door Lock Control Based on a
Near Field Communication of a Smartphone”, 2015
International Conference on Consumer Electronics-
Taiwan (ICCE-TW), pp.45-46.

[2] Adnan Ibrahim, Afhal Paravath, Aswin P. K., Shijin


Mohammed Iqbal and Shaeez Usman Abdulla, “GSM
Based Digital Door Lock Security System”,2015 IEEE
International Conference on Power, Instrumentation,
Control and Computing (PICC)).2015.

[3] Nasimuzzaman Chowdhury, Shiblee Nooman, Srijon


Sarker “,Access Control of Door and Home Security by
Raspberry Pi Through Internet”, International Journal
of Scientific & Engineering Research, Volume 4, Issue
1,dec 2013

[4] Nurbek Saparkhojayev, Aigul Dauitbayeva, Aybek


Nurtayev, and Gulnaz Baimenshina, “NFC-enabled
Access Control and Management System”,2014
International Conference on Web and Open Access to
Learning(ICWOAL), pp.1-4, Nov. 25-27 2014.
© 2016, IRJET | Impact Factor value: 4.45 | ISO 9001:2008 Certified Journal | Page 484

You might also like