B2C - Brochure - Pagination - Eng - Low Res - 1 PDF
B2C - Brochure - Pagination - Eng - Low Res - 1 PDF
B2C - Brochure - Pagination - Eng - Low Res - 1 PDF
ACC Xtra Strong Tile Adhesive -XT 111 is a grey cement based
tile adhesive used for fixing small sized ceramic & mosaic tiles
for internal application.
KEY FEATURES
• Ready to use, only water to be added.
• Better bond than conventional cement based mortar
• Faster to apply due to good spreadable properties
• Excellent high strength & water retention properties
• Suitable for fixing small size ceramic & mosaic
tiles on walls and floors
ADVANTAGES
• High Quality & Easy to store dry pre-mixed powder • Superior grip
• Excellent workability & Smooth finish • Higher productivity & Saves time
Clean the surface to remove Mix with 4.4 - 5 litres of water Apply using notch trowel to
dust and loose particles to get the right consistency get a coverage of 55 - 60 sq. ft.
धूल और �बखरे कण� को हटाने सही गाढ़ापन प्रा� करने के �लए 55 - 60 वगर् फुट का कवरे ज पाने के
के �लए सतह को साफ कर� 4.4 - 5 लीटर पानी म� �मलाएं �लए नॉच ट� ॉवेल से लगाएं
TECHNICAL INFORMATION
• Mixed density : 1.50-1.70 Kg/ltr • Bulk density : 1.40-1.60Kg/ltr
• Pot life : 120-180 minutes • Open time : 10-20 minutes
Parameter Value
Tensile adhesion Dry condition ≥ 750N
Wet condition ≥ 450N
Shear adhesion Dry condition (24 Hrs) ≥ 2.50KN
Dry condition (14 Days) ≥ 4.00KN
Heat aging condition ≥ 4.00KN
Wet condition ≥ 4.00KN
CE
LE AND WA
ME
A S
LB KB TE
NT
-3 LO
03 CK R
Mix cement and sand in 1:3 ratio. Add water and mix well Apply using suitable tools
After dry mixing, add LB-303 to get desired workability
(15% of cement weight)
ACC Xtra Strong Tile On Tile Adhesive - XT 222 is a grey cement
based tile adhesive used for fixing medium sized tiles for
internal walls & floors and external floor application BONDING AGENT
• For bonding agent mix ACC LeakBlock Cement Coat LB-303: Cement 1:1 by volume
KEY FEATURES
• Apply 1 coat of the mix on the concrete surface
• Ready to use, only water needs to be added
• Faster to apply due to good spreadable properties
• Excellent high strength & water retention properties COVERAGE
• Suitable for fixing ceramic ,mosaic & vitrified
• As a waterproofing coating : 3 - 3.5 m2/kg in 2 coats of Cement Coat LB-303
medium size tiles on walls & floors • As a mortar modifier : 6 - 7kg of Cement Coat LB-303 per 50kg of cement
• As a bonding agent : 4.5 - 5.0 m2/kg per coat
2 pH Value 7±1
USES & APPLICATIONS 3 Total Solid Content (%) 40 ± 2
Clean the surface to remove Mix with 4.4 - 5 litres of water Apply using notch trowel to
dust and loose particles to get the right consistency get a coverage of 55 - 60 sq. ft.
धूल और �बखरे कण� को हटाने सही गाढ़ापन प्रा� करने के �लए 55 - 60 वगर् फुट का कवरे ज पाने के
के �लए सतह को साफ कर� 4.4 - 5 लीटर पानी म� �मलाएं �लए नॉच ट� ॉवेल से लगाएं
Parameter Value
METHODS OF APPLICATION Shear adhesion Dry condition (24 Hrs) ≥ 4.000KN
Dry condition (14 Days) ≥ 10.00KN
SURFACE PREPARATION Heat aging condition ≥ 5.00KN
• Clean the surface with wire brush or scrubber to clear dust, loose material etc. Wet condition ≥ 5.00KN
• Wet the surface with water to make it SSD condition & remove the excess water Tensile Adhesive Strength Dry condition (28days) ≥ 0.5N/mm2
Water immersion (28days) ≥ 0.5N/mm2
WATERPROOFING COATING Heat Aging (28days) ≥ 0.5N/mm2
1 2 3 4 5 Open time after 20 minutes ≥ 0.5N/mm2
CE
ME
N
AK -3
T
BL 03
OC
K
COVERAGE
Mix 1 kg of ACC LeakBlock Mix well till solution 1st Coat on a clean Wait for 4- 6 Hrs Second Coat at
Cement Coat LB-303
with 1 kg of cement
becomes consistent surface 90 degree of 1st Coat A 20Kg bag of ACC Xtra Strong Tile On Tile Adhesive - XT 222 gives ~55-60sq. ft coverage of
3mm thickness
WATER PONDING
After Ponding test drain out the ponded water and then provide 20 mm protective plaster cement: sand
PACKAGING, SHELF LIFE & STORAGE
mortar (1:4) admixed with Integral Waterproofing compound ACC LeakBlock Cement Mix LB-202 @ 0.2
kg per bag of cement on top of the second coat • Available in 20kg BOPP Bag with liner • 6 months from the date of manufacturing
• Store in a dry place away from moisture
Page 5 Page 10
TECHNICAL INFORMATION
2 Colour Brown
USES & APPLICATIONS • 12 months from the date of manufacturing when in sealed pack
• Store in a cool and dry place
KEY FEATURES
Clean the surface to remove Mix with 4.8 - 5.4 litres of water Apply using notch trowel to
• Prevents crack development in concrete dust and loose particles to get the right consistency get a coverage of 55 - 60 sq. ft.
धूल और �बखरे कण� को हटाने सही गाढ़ापन प्रा� करने के �लए 55 - 60 वगर् फुट का कवरे ज पाने के
• Improves workability of fresh mix concrete and plaster
के �लए सतह को साफ कर� 4.8 - 5.4 लीटर पानी म� �मलाएं �लए नॉच ट� ॉवेल से लगाएं
• Protects steel against corrosion
TECHNICAL INFORMATION
AREAS / RECOMMENDED APPLICATIONS • Mixed density : 1.50-1.70 Kg/ltr • Bulk density : 1.30-1.50Kg/ltr
• Pot life : 180-240 minutes • Open time : ≥30minutes
• Roof Slab • Foundation
• Slip test (mm) : ≤0.5 • W/P : 24-27%
• Columns and Beams • All general purpose Concrete & Plaster
Parameter Value
COVERAGE
3 4 Slowly add the A 20Kg bag of ACC Xtra Strong Exterior Tile Adhesive - XT 333 gives ~55-60sq. ft coverage of
Mix ACC LeakBlock 3mm thickness
balance 1/3rd water
Cement Mix LB-202
adds another 1/3rd
till the required PACKAGING, SHELF LIFE & STORAGE
slump is achieved.
part of water and • Available in 20kg BOPP Bag with liner • 6 months from the date of manufacturing
Do not add excess
adds to mixer.
water. • Store in a dry place away from moisture
Page 7 Page 8
Standard : EN 998-1;2017-02
USES & APPLICATIONS
COVERAGE
A 20Kg bag of ACC LeakBlock Waterproof Plaster - LB 101 gives ~10-12sq. ft coverage of
10-12 mm thickness
Standard : EN 998-1;2017-02
USES & APPLICATIONS
COVERAGE
A 20Kg bag of ACC LeakBlock Waterproof Plaster - LB 101 gives ~10-12sq. ft coverage of
10-12 mm thickness
KEY FEATURES
Clean the surface to remove Mix with 4.8 - 5.4 litres of water Apply using notch trowel to
• Prevents crack development in concrete dust and loose particles to get the right consistency get a coverage of 55 - 60 sq. ft.
धूल और �बखरे कण� को हटाने सही गाढ़ापन प्रा� करने के �लए 55 - 60 वगर् फुट का कवरे ज पाने के
• Improves workability of fresh mix concrete and plaster
के �लए सतह को साफ कर� 4.8 - 5.4 लीटर पानी म� �मलाएं �लए नॉच ट� ॉवेल से लगाएं
• Protects steel against corrosion
TECHNICAL INFORMATION
AREAS / RECOMMENDED APPLICATIONS • Mixed density : 1.50-1.70 Kg/ltr • Bulk density : 1.30-1.50Kg/ltr
• Pot life : 180-240 minutes • Open time : ≥30minutes
• Roof Slab • Foundation
• Slip test (mm) : ≤0.5 • W/P : 24-27%
• Columns and Beams • All general purpose Concrete & Plaster
Parameter Value
COVERAGE
3 4 Slowly add the A 20Kg bag of ACC Xtra Strong Exterior Tile Adhesive - XT 333 gives ~55-60sq. ft coverage of
Mix ACC LeakBlock 3mm thickness
balance 1/3rd water
Cement Mix LB-202
adds another 1/3rd
till the required PACKAGING, SHELF LIFE & STORAGE
slump is achieved.
part of water and • Available in 20kg BOPP Bag with liner • 6 months from the date of manufacturing
Do not add excess
adds to mixer.
water. • Store in a dry place away from moisture
Page 5 Page 10
TECHNICAL INFORMATION
2 Colour Brown
USES & APPLICATIONS • 12 months from the date of manufacturing when in sealed pack
• Store in a cool and dry place
Clean the surface to remove Mix with 4.4 - 5 litres of water Apply using notch trowel to
dust and loose particles to get the right consistency get a coverage of 55 - 60 sq. ft.
धूल और �बखरे कण� को हटाने सही गाढ़ापन प्रा� करने के �लए 55 - 60 वगर् फुट का कवरे ज पाने के
के �लए सतह को साफ कर� 4.4 - 5 लीटर पानी म� �मलाएं �लए नॉच ट� ॉवेल से लगाएं
Parameter Value
METHODS OF APPLICATION Shear adhesion Dry condition (24 Hrs) ≥ 4.000KN
Dry condition (14 Days) ≥ 10.00KN
SURFACE PREPARATION Heat aging condition ≥ 5.00KN
• Clean the surface with wire brush or scrubber to clear dust, loose material etc. Wet condition ≥ 5.00KN
• Wet the surface with water to make it SSD condition & remove the excess water Tensile Adhesive Strength Dry condition (28days) ≥ 0.5N/mm2
Water immersion (28days) ≥ 0.5N/mm2
WATERPROOFING COATING Heat Aging (28days) ≥ 0.5N/mm2
1 2 3 4 5 Open time after 20 minutes ≥ 0.5N/mm2
CE
ME
N
AK -3
T
BL 03
OC
K
COVERAGE
Mix 1 kg of ACC LeakBlock Mix well till solution 1st Coat on a clean Wait for 4- 6 Hrs Second Coat at
Cement Coat LB-303
with 1 kg of cement
becomes consistent surface 90 degree of 1st Coat A 20Kg bag of ACC Xtra Strong Tile On Tile Adhesive - XT 222 gives ~55-60sq. ft coverage of
3mm thickness
WATER PONDING
After Ponding test drain out the ponded water and then provide 20 mm protective plaster cement: sand
PACKAGING, SHELF LIFE & STORAGE
mortar (1:4) admixed with Integral Waterproofing compound ACC LeakBlock Cement Mix LB-202 @ 0.2
kg per bag of cement on top of the second coat • Available in 20kg BOPP Bag with liner • 6 months from the date of manufacturing
• Store in a dry place away from moisture
Page 3 Page 12
CE
LE AND WA
ME
A S
LB KB TE
NT
-3 LO
03 CK R
Mix cement and sand in 1:3 ratio. Add water and mix well Apply using suitable tools
After dry mixing, add LB-303 to get desired workability
(15% of cement weight)
ACC Xtra Strong Tile On Tile Adhesive - XT 222 is a grey cement
based tile adhesive used for fixing medium sized tiles for
internal walls & floors and external floor application BONDING AGENT
• For bonding agent mix ACC LeakBlock Cement Coat LB-303: Cement 1:1 by volume
KEY FEATURES
• Apply 1 coat of the mix on the concrete surface
• Ready to use, only water needs to be added
• Faster to apply due to good spreadable properties
• Excellent high strength & water retention properties COVERAGE
• Suitable for fixing ceramic ,mosaic & vitrified
• As a waterproofing coating : 3 - 3.5 m2/kg in 2 coats of Cement Coat LB-303
medium size tiles on walls & floors • As a mortar modifier : 6 - 7kg of Cement Coat LB-303 per 50kg of cement
• As a bonding agent : 4.5 - 5.0 m2/kg per coat
2 pH Value 7±1
USES & APPLICATIONS 3 Total Solid Content (%) 40 ± 2
Clean the surface to remove Mix with 4.4 - 5 litres of water Apply using notch trowel to
dust and loose particles to get the right consistency get a coverage of 55 - 60 sq. ft.
धूल और �बखरे कण� को हटाने सही गाढ़ापन प्रा� करने के �लए 55 - 60 वगर् फुट का कवरे ज पाने के
के �लए सतह को साफ कर� 4.4 - 5 लीटर पानी म� �मलाएं �लए नॉच ट� ॉवेल से लगाएं
TECHNICAL INFORMATION
• Mixed density : 1.50-1.70 Kg/ltr • Bulk density : 1.40-1.60Kg/ltr
• Pot life : 120-180 minutes • Open time : 10-20 minutes
Parameter Value
Tensile adhesion Dry condition ≥ 750N
Wet condition ≥ 450N
Shear adhesion Dry condition (24 Hrs) ≥ 2.50KN
Dry condition (14 Days) ≥ 4.00KN
Heat aging condition ≥ 4.00KN
Wet condition ≥ 4.00KN
ACC Xtra Strong Tile Adhesive -XT 111 is a grey cement based
tile adhesive used for fixing small sized ceramic & mosaic tiles
for internal application.
KEY FEATURES
• Ready to use, only water to be added.
• Better bond than conventional cement based mortar
• Faster to apply due to good spreadable properties
• Excellent high strength & water retention properties
• Suitable for fixing small size ceramic & mosaic
tiles on walls and floors
ADVANTAGES
• High Quality & Easy to store dry pre-mixed powder • Superior grip
• Excellent workability & Smooth finish • Higher productivity & Saves time