Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
94 views

ADC Interfacing 8051 Code

This code is for an LCD display on a microcontroller. It defines ports and pins for the LCD, includes a delay function. It also includes functions to send command and data to the LCD. The main function initializes the LCD, displays static text, then enters a loop to continuously read an ADC value, convert it to a string, and display the string on the second line of the LCD.

Uploaded by

Sự Nguyễn
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
94 views

ADC Interfacing 8051 Code

This code is for an LCD display on a microcontroller. It defines ports and pins for the LCD, includes a delay function. It also includes functions to send command and data to the LCD. The main function initializes the LCD, displays static text, then enters a loop to continuously read an ADC value, convert it to a string, and display the string on the second line of the LCD.

Uploaded by

Sự Nguyễn
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

#include<reg51.

h>
sfr mydata = 0x90;
sbit rd= P2^5;
sbit wr= P2^6;
sbit intr= P2^7;
sbit RS = P2^0;
sbit EN = P2^1;
//(0x90)is address of port1, else you can write as : #defintre mydata P1

void delay(int n)
{
int i,j;
for(i=0;i<n;i++)
for(j=0;j<255;j++);
}
void lcd_cmd(char a)
{
P3 = a;
RS = 0;
EN = 1;
delay(10);
EN = 0;
}

void lcd_data(char a)
{
P3 = a;
RS = 1;
EN = 1;
delay(10);
EN = 0;
}

void display(char *ptr)


{
while(*ptr != '\0')
{
lcd_data(*ptr);
ptr++;
}
}
void main()
{
unsigned char value;
char temp[4];
int i=0;
lcd_cmd(0x01); //clear screen
lcd_cmd(0x0E); //Display On, Cursor Blinking
lcd_cmd(0x38); //2 lines and 5*7 matrix
lcd_cmd(0x80); //Force Cursor to beginning of first
display("ADC Value=");
lcd_cmd(0xC0);
//mydata = 0xEF;
intr = 1;
rd = 1;
wr = 1;
while(1)
{
lcd_cmd(0xC0);
wr = 0;
wr = 1;
while(intr==1);
rd=0;
value = mydata;

while(i<3)
{
temp[i] = (value%10) + '0'; // For converting into ASCII
value = value / 10;
i++;
}

for(i=2;i>=0;i--)
{
lcd_cmd(0x06);
lcd_data(temp[i]);
}
i=0;
delay(1000);
rd = 1;
}
}

You might also like