M 190

Multi-jet meter
Dry-dial meter
er for warm water

EEC approval
Warm water up to 90 °C

D 02
6.331.08

●
Multi-jet dry-dial meter for warm water
●
Nominal flowrate Qn 1.5 to 10 m3/h
●
EEC approval metrological Class B·H
●
ELSTER conText® inscription system

www.elster.com
Multi-jet meter M190 MTHR
Meter size / Nominal flowrate Qn m3/h 1.5 2.5 3.5 6 10
Nominal size DN mm 15 20 25 30 40
DN inches 1/2 3/4 1 1 1 1/2

Ordering number Pulse 100L 0002750 0002752 0002754 0002756 0002758

Initial calibration class B·H Pulse 1000L 0002751 0002753 0002755 0002757 0002759

Dimensions
D1 Meter conn. thread ISO 228/1 inches G 3/4 B G1B G 1 1/4 B G 1 1/2 B G2B
Conn. pipe thread ISO 7/1 inches R 1/2 R 3/4 R1 R 1 1/4 R 1 1/2
.....................................................................................................................................................................................................................................................................................................
L1 Meter length mm 190 190 260 260 300
Connector length mm 50 50 60 60 70
.....................................................................................................................................................................................................................................................................................................
B1 Width mm 100 100 100 100 100
B2 Distance Pipe axis to meter axis mm — — — — —
.....................................................................................................................................................................................................................................................................................................
H1 Centerline height mm 31 31 43 43 46
H2 Overall height mm 115 115 130 130 153
.....................................................................................................................................................................................................................................................................................................
Weight kg 1.5 1.6 2.5 2.5 3.7

Performance characteristics
Maximum flow rate Qmax m3/h 3 5 7 12 20
Transitional flow rate Qt** l/h 120 200 200 480 800
Minimum flow rate Qmin** l/h 25 35 35 80 150
Starting flow l/h 10 15 15 50 50

Continuous load approx. 1.6 x Qn l/h 2 500 4 000 5 600 10 000 16 000
Temperature Tmax °C 90 90 90 90 90
Pressure rating PN bar 16 16 16 16 16
Flow capacity at 1 bar pressure loss m3/h 4.4 6.7 7.2 12.8 22 32
** typical performance characteristics, exceeds the demands of the metrological class B

MTHR Qn 1.5
Qn 1.5 2.5 3.5 6 10 15
1.0
B1
Pressure loss in bar

0.1

H2
D1
H1 0.01
0.1 0.2 0.3 0.5 1 2 3 4 5 10 20 30 40 50 100
Flowrate in m3/h
L1

Reed Disc with tamper detection

fitted as standard

Type Reedswitch potted,

protection IP 68
Contact load max. 24 V DC,
50 mA
Resistance 100 Ohm
Cable 3 x 0.14 mm2
Ø 3.3 mm
Pulse contact brown – white
Tamper contact green – white
Cable length 3m

Can be removed if not required

Ordering numbers for meters with pulse preparation (type -KN),
for later assembly of Reed Disc, on request

Elster Metering Limited All rights reserved.

130 Camford Way, Sundon Park No part of the publication may be
Luton, Bedfordshire LU3 3AN reproduced in any material form
without the written permission of the
United Kingdom
Elster Group except in accordance
T +44 (0) 1582 846 400 with the provisions of the Copyright,
F +44 (0) 1582 564 728 Designs and Patents Act 1988.
E water.metering@gb.elster.com The Company’s policy is one of
continuous improvement and the right
is reserved to modify the specifications
www.elstermetering.com
without notice.
Copyright © 2010 Elster Group
8510C6345