Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 633 views

    Shell Vitrea Oils: Industrial Bearing and Circulating Oil

    Uploaded by

    samar209
    Shell Vitrea Oils are blended from paraffinic mineral oils for lubricating industrial bearings and circulating systems operating at moderate temperatures and loads. They provide oxidation resistance, high viscosity index, and compatibility with mineral oil seals. The oils are unlikely to pose health or safety risks when used as recommended.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Shell Vitrea Oils: Industrial Bearing and Circulating Oil

    Uploaded by

    samar209
    633 views3 pages
    Shell Vitrea Oils are blended from paraffinic mineral oils for lubricating industrial bearings and circulating systems operating at moderate temperatures and loads. They provide oxidation resistance, high viscosity index, and compatibility with mineral oil seals. The oils are unlikely to pose health or safety risks when used as recommended.

    Original Title

    VITREA.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Shell Vitrea Oils are blended from paraffinic mineral oils for lubricating industrial bearings and circulating systems operating at moderate temperatures and loads. They provide oxidation resistance, high viscosity index, and compatibility with mineral oil seals. The oils are unlikely to pose health or safety risks when used as recommended.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    633 views3 pages

    Shell Vitrea Oils: Industrial Bearing and Circulating Oil

    Uploaded by

    samar209
    Shell Vitrea Oils are blended from paraffinic mineral oils for lubricating industrial bearings and circulating systems operating at moderate temperatures and loads. They provide oxidation resistance, high viscosity index, and compatibility with mineral oil seals. The oils are unlikely to pose health or safety risks when used as recommended.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    Shell Vitrea Oils

    Industrial Bearing and Circulating Oil


    Shell Vitrea Oils are blended from HVI, solvent refined, paraffinic
    mineral oils for the lubrication of heavy duty industrial bearings and circulating
    systems

    Applications
    For use in the following applications where
    temperatures and loadings are moderate:- For further guidance on Product Health &
    Safety refer to the appropriate Shell
     Roll-neck bearings Product Safety Data Sheet.
     Circulating systems
     Plain and rolling element bearings
    Advice
     Enclosed spur, helical, bevel and Advice on applications not covered in this
    worm gearboxes where the use of a leaflet may be obtained from your Shell
    non-additive is approved by the Representative.
    equipment manufacturer

    Performance Features
     Oxidation resistant
    Long oil life because of its natural
    resistance to the formation of sludge
    and the products of oxidation

     High Viscosity Index


    Minimal change of viscosity over the
    operating temperature range

    Seal Compatibility
    Shell Vitrea Oils are compatible with all
    normal mineral oil seal materials

    Health & Safety


    Shell Vitrea Oils are unlikely to present
    any significant health or safety hazard
    when properly used in the recommended
    application, and good standards of
    industrial and personal hygiene are
    maintained.
    Typical Physical Characteristics
    Shell Vitrea Oil 22 32 46 68 100 150 220 320 460

    Kinematic Viscosity
    @ 40°C cSt 21.9 32.0 46.1 68.2 100.1 150 220 322 440
    100°C cSt 4.28 5.42 6.82 8.87 11.46 14.9 19.3 24.8 29.6
    (IP 71)

    Viscosity Index 100 103 102 103 101 99 99 99 96


    (IP 226)

    Density 0.888 0.893 0.896 0.888 0.901 0.905


    0.875 0.880 0.884
    @ 15°C kg/l
    (IP 160)

    Flash Point °C 231 240 249 252 255 258


    204 216 222
    (Pensky-Martens Open Cup)
    (IP 34)
    (Pensky-Martens Close Cup)
    (IP 34) 240

    Pour Point -6 -6 -6 -6 -6 -6
    -6 -6 -6
    °C
    (IP 15)

    These characteristics are typical of current production. Whilst future


    production will conform to Shell's specification variations in these
    characteristics may occur.
    June, 95

    You might also like