Produkt_Range_A-201-1 28.06.

2007 15:52 Uhr Seite 1

Product
Range

A-205-1
Product Range A-205-1 03.09.2007 16:19 Uhr Seite 2

APPLICATION RANGES
APPLICATION RANGES

Semi-hermetic
1-stage 2C0173SH .. 8C9400PH
Tandem

2-stage S4T-5.2 .. S6F-30.2 Tandem

Open Drive
0 .. VII
Low speed

.2 Generation 2T.2 .. 6F.2 & W2TA .. W6FA

2-stage S6H.2 .. S6F.2

Transport 4UFC .. 6NFC (500 - 3500 rpm)

F400 & F600 (500-4000 rpm)

0 1000 2000 3000 4000 5000 6000 7000 8000 9000 CFH 13000
Displacement with 60 Hz resp. 1750 rpm

Semi-hermetic
Screws HS.53/64/74/85 Parallel compound

Open Drive OS.53/74/85 Parallel compound

Screws

Semi-hermetic
Compact Screws CS.65/75/85/95 Parallel units

Hermetic VSK
Compact Screw

Frequency
inverter
0 5000 10000 15000 20000 25000 30000 35000 40000 CFH 110000
Displacement with 60 Hz resp. 3500 rpm

Standard
Vertical Scroll ESH725…976

Vertical Scroll ESD725…743

for R410A

Horizontal ELH725…736(743)
Scroll
0 500 1000 1500 2000 2500 3000 CFH 3500
Displacement with 60 Hz

2 A-205-1
Product Range A-205-1 03.09.2007 16:19 Uhr Seite 3

RECIPROCATING COMPRESSORS
RECIPROCATING COMPRESSORS

Semi-hermetic design
BITZER owes a considerable portion of its success to its well- 173 .. 9400 CFH
known OCTAGON® series and ".2 Generation" reciprocating 0.5 .. 70 HP
compressors. These compressors are particularly efficient,
sturdy, reliable, low-vibration and silent and can thus be put to
many uses in heat pump, air conditioning and refrigeration
applications, extending from medium temperature to low tem-
perature applications requiring small and medium capacities.
In addition, the modern design meets the specific requirements
for all modern refrigerants.

Tandem compressors
The tandem concept is the simplest way of connecting 960 .. 12920 CFH
OCTAGON® series respectively single or two-stage ".2 Generation" 4 .. 100 HP
compressors in parallel. The compressors are mounted via the
joint suction gas chamber at the motor sides. Efficient capacity
control is achieved by switching one of the compressors or by
blocking cylinders (possible with 4-cylinder compressors).

2-stage design
The 2-stage ".2 Generation" compressors have not only proven 830 .. 4270 CFH
their worth for the extreme thermal loads of R22 low temperature 5.5 .. 30 HP
applications, but are to this day demonstrating their versatility
and reliability in climatic chambers, in vacuum drying and other
applications. This technology efficiently and reliably covers
application ranges with evaporation temperatures as low
as -70°C.

Open drive design

The ".2 Generation" open drive compressors are frequently used 830 .. 6460 CFH
to meet special requirements, for instance in marine applica-
tions, in explosion-proof design and/or systems with NH3. They
are equipped with a particularly reliable shaft seal and can be
operated either with directly flanged-on motor or by means of
V-belts.
The low speed compressors 0..VII complete the open compres-
sor series to smaller capacities.

Compressors for transport applications

BITZER reciprocating compressors perform their tasks in a variety 1480 .. 3600 CFH
of transport applications. These silent aluminum lightweights in
open drive design are employed in bus air conditioning ranging
from small minibuses to double-decker buses or in transport
refrigeration systems.
Frequency-controlled semi-hermetic aluminum compressors are
out at sea cooling modern containers while OCTAGON ®
compressors used in the air conditioning of passenger trains,
suburban trains and locomotive driver’s cabs have already trav-
eled millions of miles.

A-205-1 Data based on 60 Hz operation resp. 1750 rpm 3

Product Range A-205-1 03.09.2007 16:19 Uhr Seite 4

SCREWSCREW
COMPRESSORS
COMPRESSORS

Semi-hermetic design (HSK/HSN)

3680 .. 17480 CFH For more than 25 years, BITZER has been producing small and
20 .. 140 HP medium capacity semi-hermetic screw compressors. The high
power density and the external oil separator concept make it
possible to realize simple paralleling ranging from larger com-
mercial applications to industrial plants. The result is a high
degree of reliability and efficiency, even in the plant’s partial load
range.

Semi-hermetic compact screws (CSH and CSW)

5840 .. 38800 CFH Compact screws are equipped with integrated oil separator and
35 .. 300 HP four-step or continuously variable slide capacity control. Thanks
to this feature, the compressor is easy to integrate in short
circuits, such as water or brine chillers. The economizer is inte-
grated in the slide control and can thus be operated effectively
both during full and partial load.

Hermetic design (VSK)

1980 .. 3390 CFH The hermetic VSK compressors are tailored to the special require-
15 .. 25 HP ments of railway air conditioning. As particular advantage,
these compressors offer a low installation height they owe to
their horizontal design and a large speed control range resulting
from a frequency inverter drive.

Open drive design (OSK/OSN)

3680 .. 17480 CFH The open drive screw compressors were developed for use with
coupling and coupling housing to directly flange on electric
motors. In combination with the particularly reliable shaft seal,
assembling an open drive compressor is conceivably easy.
A special version of the OS series is also available for use with
NH3 or in explosion proof zones.

Accessories for screw compressors

BITZER offers an extensive range of accessories for use with
screw compressors. For individual applications, a selection can
be made from differently sized primary and secondary oil sepa-
rators and water- or air-cooled oil coolers. The pressure vessels
comply with current pressure vessel directives.

4 Data based on 60 Hz operation resp. 3500 rpm A-205-1

Product Range A-205-1 03.09.2007 16:19 Uhr Seite 5

SCROLL COMPRESSORS
SCROLL COMPRESSORS

Hermetic design (ESH/ESD)

Predominantly in the field of air conditioning where smaller ca- 1070 .. 3240 CFH
pacities are needed, scroll compressors complement the related 7.5 .. 27 HP
rotative screw compressor technique. Their outstanding feature
is the patented suction gas cooling which serves to achieve a
thermal equilibrium between orbiting and fixed spiral.

PRESSURE VESSELS
PRESSURE VESSELS

Shell and tube condensers

High-performance finned tubes are at the heart of this condens- 27 .. 3110 Btu/h
er series. At very compact dimensions, they facilitate the
efficient condensation of common H(C)FC refrigerants. The con-
densers are available both in standard design and as sea water
version. What’s more, condensers with second refrigerant outlet
can also be used as desuperheaters.

Liquid receivers
More than 18 volume stages offer a wide choice of receivers,
each of them available in horizontal or vertical design, suitable
for a great variety of applications. By covering all standard refrig-
erants, as well as R410A, NH3, CO2, and by providing versions
with extra large connections, for instance, the BITZER range of
receivers attracts by its great diversity.
Apart from approval according to current standards, comprehen-
sive accessories such as visual and electronic minimum and
maximum level control, continuous level control or mounting rails
for compressor installation are available.

A-205-1 Data based on 60 Hz operation resp. 3500 rpm 5

Product Range A-205-1 03.09.2007 16:19 Uhr Seite 6

CONDENSING AND AND

CONDENSING COMPRESSOR
COMPRESSOR UNIT
UNITS

Condensing units with reciprocating compressors

BITZER and BITZER subsidiaries manufacture air- and water-
cooled condensing units in different designs for the particular
needs of individual markets.
Equipment features are adapted to the requirements of individual
regions. Versions with large condenser, two fans, receiver, oil
separator, weatherproof housing or extensive control system are
available.
In addition, some BITZER subsidiaries manufacture parallel com-
pounding systems comprising reciprocating or screw compres-
sors in line with local market requirements.

QUALITY
QUALITY

Consistent Quality Worldwide

Maximum reliability is called for in every application of refrigera-
tion and air-conditioning. BITZER complies with ISO 9001/2000
for consistent quality in all steps of product life. In addition the
factories in Rottenburg and Schkeuditz (both Germany) and
Castello Branco (Portugal) fulfill the environmental certifications
according EN ISO 14001 and EMAS.
For all production facilities worldwide the quality standard "made
by BITZER" is valid. That means the same production and quality
control methods are incorporated world wide including helium
leak test and running test of all produced compressors.
ASERCOM certification gives customer confidence in document-
ed performance data of real market compressors.
All semihermetic compressors are approved to UL/CSA

6 A-205-1
Product Range A-205-1 03.09.2007 16:19 Uhr Seite 7

THE SPECIAL
THE SPECIAL BITZER
BITZER SUPPORT
SUPPORT

BITZER on-site
BITZER as a competent and experienced contact person is
on-site in over 20 countries with own sales offices or production
plants. Furthermore the BITZER distribution network contains
over 170 agencies worldwide. The addresses of all BITZER
contact persons are available on the Internet at:
www.BITZER.de/address.

Website
The BITZER website is more than just another internet site. The
philosophy at BITZER is to share freely the information on its
products and applications to support its costumers faster and
better. The site provides direct access to the most used docu-
ments and information. The site also features links to regional
home pages to keep customers close to important events.

Product selection software

Fast, simple and accurate selection of BITZER products is pos-
sible with the BITZER software. It includes current and former
models for both new selections and service requirements.
Beside the performance data for individual operating conditions
of all common refrigerants, performance tables, polynomial data
according to ARI540 and EN12900 and technical data are avail-
able as well.

eP@rts – Spare parts selection software

This interactive spare parts identification and selection tool is a
milestone in the refrigeration business. Its easy clear interface
and content are a tribute to BITZER’s continued dedication to
customer service tools.

A-205-1 7
Product Range A-205-1 03.09.2007 16:19 Uhr Seite 8

Bitzer US, Inc.

4031 Chamblee Road
Oakwood, GA 30566
Phone: 770.503.9226
Fax: 770.503.9440
www.bitzerus.com

Bitzer Canada, Inc.

930 Selkirk Street
Point Claire, PQ H9R 4T7
Phone: 514.697.3363
Fax: 514.697.9768
www.bitzer.ca

Bitzer Mexico S de R.L. de C.V.

Calle Estanislao Martinez Lara N. 29
Subject to change 09.07

Parque Industrial Milimex

Sta. Catarina, N.L.; 66390 Mexico
Phone: +52 (81) 1522 4501
Fax: +52 (81) 1522 4505
www.bitzermexico.com