Professional Documents
Culture Documents
Software Quick Start Guide PDF
Software Quick Start Guide PDF
All trademarks, service marks, and trade names referenced in this material are the property of their
respective owners and are used only for identification and explanation without intent to infringe.
spBeam, spColumn, spFrame, spMats, spSlab, spWall are trademarks of STRUCTUREPOINT, LLC.
Copyright © 2002 – 2012, STRUCTUREPOINT, LLC. All Rights Reserved.
QSG 200
5/23/2012
Table of Contents
Operating Systems
Windows XP or later is recommended for standalone license or as client in
a network license setup. Windows Vista and Windows 7 require administrator
privileges during initial installation and license activation.
Windows Server 2003 or later is recommended as the license server in
a network license setup.
Contact Information
Mail: StructurePoint
Customer Service
5420 Old Orchard Road
Skokie, IL 60077
USA
Figure 2-8 Right click on the server name to show this pop-up menu
Figure 2-9 Check Add feature to server’s file and copy/paste license
code
5. Leave the Distribution criteria text box empty. Click the Add button to
continue.
6. Repeat steps 3 and 4 to add each StructurePoint software feature. If the server
has been configured successfully, all of the StructurePoint programs should be
listed under the server name (Figure 2-10). Please note that feature versions
need not match the version running on the client workstation exactly (this
allows updates to run without a new license code).
Program Installation
1. Insert the StructurePoint CD into the CD drive. The CD startup page (Figure
3-1) will appear automatically; skip to step 7. If the startup page does not
appear automatically, proceed to step 3
Online Activation
You will need the order number, product serial number (from the order
confirmation email), and the locking code obtained in the following steps.
Activation by Phone
If you choose to activate by phone, a screen showing the product ID and your
locking code will appear (Figure 3-15). This information is needed when you call
1-847-966-4357 to obtain your license.
Activation by E-mail
If you choose to activate via E-mail, a screen prompting you to provide your name
and contact information will appear (Figure 3-16). After you enter all the
information, click the Send E-mail button to send a license request. Once the
information is received and verified, the license code will be generated and sent to
you via e-mail.
IMPORTANT: If you encounter any difficulties sending the e-mail automatically
from the license activator please call us at 1-847-966-4357 or e-mail us at
licensing@StructurePoint.org.
After receiving the license code, click the License Activation button in the start-
up dialog box (Figure 3-10) and choose the Enter License Code option. Then
copy and paste the code into the License Code box. If the license code is valid, the
application will be activated and the window shown in Figure 3-14 will appear.
Click the Finish button to complete the activation. If you encounter any
difficulties please refer to the online installation manual at
www.structurepoint.org/support_doc.asp.