ALUMINUM ELECTROLYTIC CAPACITORS

UPZ
High Voltage, Miniature-sized

High ripple current. UPT

Load life of 2000 hours at 105°C. Smaller
Suited for ballast applications.
Compliant to the RoHS directive (2011/65/EU,(EU)2015/863).
UPZ
Smaller

UPH
Specifications
Item Performance Characteristics

Category Temperature Range – 40 to +105°C

Rated Voltage Range 200 to 450V
Rated Capacitance Range 18 to 470µF
Capacitance Tolerance ± 20% at 120Hz, 20°C
Leakage Current After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.04CV+100 (µA).
Measurement frequency : 120Hz at 20°C
Tangent of loss angle (tan δ) Rated voltage (V) 200 250 400 420 450
tan δ (MAX.) 0.12 0.15 0.15 0.20 0.20

Measurement frequency : 120Hz

Stability at Low Temperature Rated voltage (V) 200 250 400 420 450
Impedance ratio (MAX.) Z–25°C / Z+20°C 3 3 8 8 8

The specifications listed at right shall be met when the

Capacitance change Within ± 20% of the initial capacitance value
capacitors are restored to 20°C after D.C. bias plus rated
Endurance tan δ 200% or less than the initial specified value
ripple current is applied for 2000 hours at 105°C, the peak
Leakage current Less than or equal to the initial specified value
voltage shall not exceed the rated voltage.

After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C
Shelf Life
5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.

Marking Printed with white color letter on dark brown sleeve.

Radial Lead Type Type numbering system (Example : 200V 220µF)

φd
Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12
U P Z 2 D 2 2 1 M HD T
φD±0.5 MAX.

Size code
P±0.5

Configuration
Capacitance tolerance (±20%)
(mm)
Rated capacitance (220µF)
L+ 2.0 MAX. 15MIN 4MIN φD 10 12.5 16 18
Pressure
relief vent P 5.0 5.0 7.5 7.5 Rated voltage (200V)
φd 0.6 0.8 0.8 0.8 Series name

Type

Pencil - shaped Type Configuration

φd Size code Blank, 6 9
Sleeve (P.E.T.) φD Pb-free leadwire Pb-free PET sleeve
10 PD ND
12.5 to 18 HD NY
φD±0.5 MAX.

P±0.5

L+ 2.0 MAX. 15MIN 4MIN

Pressure
relief vent
Frequency coefficient of rated ripple current
(mm)
φD 10 12.5 V 60Hz 120Hz 500Hz 1kHz 10kHz or more
P 5.0 5.0 200・250 0.80 1.00 1.20 1.30 1.40
φd 0.6 0.6 400 to 450 0.80 1.00 1.25 1.40 1.50

• Please refer to page 18 about the end seal configuration.

Dimension table in next page.

CAT.8100J
ALUMINUM ELECTROLYTIC CAPACITORS

UPZ
Dimensions

δ P

3 . . 4 P P

4 . P 9

. 3 . . 3 P

. 3 3 P 9

. 3 . . 4 P

. 4 . P

3 . . P

. . P 9

33 3 . . 4 P 33

33 3 . . 4 P 33

39 4 . 3 3 P 39

39 3 . . 3 P 39

4 4 . 3 P 4

4 . 9 P 9

. 3 4 P 9

. . 3 4 P 9

3 . . 3 4 P P

4 . 3 . . 3 P 4

4 4 . 43 P 4 9

. 3 . . 99 4 P

. 99 P 9

. 4 . 4 P
4
3 . . P

. . P 9

3 . . P

3 . . P

4 . P

3 . . P

4 . 9 P

3 . . 4 9. P P

39 . 3 . . . 3 P 39

4 . 3 . . 9. 3 P 4

. 4 . 4 . 43 P

4 3 . . 4 .4 P

3 . . 4 . P

4 . P

3 . . P

3 . . P

4 . P
For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ).
If there is no size code in the part number, please add size code “1” and then add the appropriate code.

CAT.8100J
ALUMINUM ELECTROLYTIC CAPACITORS

UPZ
Dimensions

δ P

3 . . 4 4 P P

33 . 3 . . 94 P 33

33 4 . 94 3 P 33 9

39 . 3 . . 3 P 39

4 . 4 . 94 3 P 4

4 . 94 4 P 4 9
4
3 . . 44 P

3 . . 3 4 49 P

4 . P

3 . . P

. . 3 P 9

3 . . 9 P

4 . 4 P

For cut leads, formed leads or taped parts, please add the appropriate code after the size code (12th digit ).
If there is no size code in the part number, please add size code “1” and then add the appropriate code.

Please refer to page 18, 19 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.

CAT.8100J