CNT-300 Product Specification
CNT-300 Product Specification
CNT-300 Product Specification
Product Classification
Product Type Braided coaxial cable
General Specifications
Braid Coverage 87 %
Dimensions
Diameter Over Dielectric 4.83 mm | 0.19 in
Electrical Specifications
Cable Impedance 50 ohm
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: January 15, 2020
CNT-300
Operating Frequency Band 30 – 6000 MHz
Peak Power 10 kW
Shielding Effectiveness 90 dB
Velocity 83 %
Attenuation
Frequency (MHz) Attenuation (dB/100 m) Attenuation (dB/100 ft)
30.0 3.8 1.16
50.0 4.9 1.5
150.0 7.9 2.4
220.0 9.5 2.9
450.0 13.1 4
900.0 19.4 5.9
1500.0 25.3 7.7
1800.0 28.2 8.6
2000.0 29.8 9.1
2500.0 33.8 10.3
3000.0 37.4 11.4
4000.0 44.61 13.6
4500.0 47.75 14.55
5000.0 50.52 15.4
5200.0 51.83 15.8
5500.0 53.14 16.2
5800.0 54.78 16.7
6000.0 55.8 17
Material Specifications
Braid Material Tinned copper
Jacket Material PE
Mechanical Specifications
Minimum Bend Radius, single Bend 0.88 in | 22.352 mm
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: January 15, 2020
CNT-300
Bending Moment 0.5 N-m | 4.425 in lb
Environmental Specifications
Installation temperature -40 °C to +85 °C (-40 °F to +185 °F)
Regulatory Compliance/Certifications
Agency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
Page 3 of 3
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the
most current information. Revised: January 15, 2020