Weather Monitoring System For Solar & Wind Projects
Weather Monitoring System For Solar & Wind Projects
Weather Monitoring System For Solar & Wind Projects
250420
ABOUT AERON
2
PRODUCTS & SOLUTIONS
In over a decade’s journey, Aeron with its innovative research, reliable products and diligent support, has
become preferred choice of its customers. The products offered by Aeron are categorised in two divisions.
Navigate, control and stabilize your platform in High reliability rugged data loggers and full
aerospace, defense and automotive applications. package environment monitoring solutions
3
WHAT IS DATA LOGGER?
COLLECT TRANSMIT
The data logger collects The collected and filtered
data from various sensors data is transmitted further
connected to it. Device over wired and wireless
has analog, digital and interfaces.
serial type inputs for data ANALYSE DISPLAY
acquisition from variety of Collected data is The transmitted data is
sensors and equipment. processed, analyzed, stored on cloud and
filters and algorithms are displayed on user devices
applied for high accuracy. using application.
4
KEY FEATURES OF AERON’S DATA LOGGER
5
KEY SPECS OF AERON’S DATA LOGGER
6
ENVIRONMENT MONITORING PRODUCTS
7
RENEWABLE ENERGY – WHY IT IS IMPORTANT?
Renewable energy sources Renewable sources of The air and water pollution
are inexhaustible and energy provide security to caused by coal and natural
abundant unlike coal and countries of all size from gas plants leads to cancer,
natural gas have limited global geo-politics. heart attack and other life
reserves. threating diseases.
8
WHY MONITOR RENEWABLE ENERGY PLANTS?
9
AERON’S WEATHER MONITORING SYSTEM FOR SOLAR & WIND
10
GENERAL DRAWING OF WEATHER MONITORING SYSTEM
Anemometer
11
ARCHITECTURE OF WEATHER MONITORING SYSTEM
1 3
SENSORS
2
Pyranometer SMART DATA LOGGER 4 USER DEVICES (WEBSITE / APP)
Module temperature
Anemometer
Ambient
temperature 5
Relative humidity
PLC / SCADA
12
COMMONLY USED SENSORS IN WEATHER MONITORING SYSTEM
The silicon based irradiance sensor to measure the solar radiation but unlike
Pyranometer the reference cell needs to be matched with solar panel material
Irradiance
for accurate results. Also it is cost-effective in comparison to Pyranometer.
The energy output from a solar panel depends on its temperature. Therefore,
Module Surface the measurement of module temperature is important for estimation of the
Temperature plant performance ratio.
The wind at the site affects the temperature of the solar modules, the data is
also useful for safe operation of plant. For Wind Farms, the wind data is very
Anemometer
critical because the generation depends on the wind speed and the direction.
13
COMMONLY USED SENSORS IN WEATHER MONITORING SYSTEM
For the same level of irradiance the energy output from solar panels depends
Ambient on the ambient temperature. Therefore, it is an important parameter for
Temperature measurement of plant performance ratio.
The humidity affects the generation of power at solar plants. Also the humidity
affects the life of various components. It is measured along with the ambient
Humidity
temperature.
The rain gauge measures the amount of rain taking place at the site location.
Rain Gauge The data is used for potential flooding and equipment damage due to rain.
Barometric The barometric pressure sensor is used to measure the pressure at the site
Pressure location. It helps in the performance monitoring of the solar and wind farm.
14
COMMONLY USED SENSORS IN WEATHER MONITORING SYSTEM
The dust and soiling of panels greatly affect the total energy output from the
plant, especially at locations which have loose soil causing dust or sand to
Soiling Station accumulate over panels. The soiling station measures the energy loss due to
soiling and allows operators to decide when to clean the panels.
It could be bright sunny day but with cloud cover over site location the energy
output may be reduced. To consider the effect of clouds in the plant
Cloud Cover
performance estimation, the cloud cover sensor is used.
This measures global and reflected solar radiation using two pyranometers
Albedometer mounted back to back with each other. It also gives measurement of albedo or
net radiation which helps in understanding the effect of ground.
This sensor measures the direct beam solar irradiance. Generally it is used with
a sun tracker so that the pyrheliometer can remain aligned towards sun for the
Pyrheliometer
measurement.
15
SUPPORTED SENSOR BRANDS IN WEATHER MONITORING SYSTEM
R M Young
Kipp & Zonen
Metone Meteocontrol
Hukseflux Module
Pyranometer Anemometer Davis Instruments IMT Solar
Eko Instruments temperature
Lufft Aeron Systems
Apogee
Gill Instruments
R M Young
Meteocontrol
Irradiance R M Young Temperature Metone
IMT Solar Rain Gauge
Davis Instruments & Humidity Davis Instruments
Rotronics
16
PROJECTS USING AERON’S WEATHER MONITORING SYSTEM
Aeron’s Weather Monitoring Systems are being used in over 12 GW of solar & wind power projects globally. Following
are the details of few major projects and our customers.
17
PROJECTS USING AERON’S WEATHER MONITORING SYSTEM
18
ADVANTAGE AERON
19
GLOBAL DISTRIBUTOR PARTNERS
FRANCE
USA
ALGERIA KSA
UAE
NICARAGUA VIETNAM
NAMIBIA
S. AFRICA
AUSTRALIA
20
PRODUCTION & TESTING FACILITY
21
DESIGN & DEVELOPMENT FACILITY
22
WORK CULTURE AT AERON
23
THANK YOU!
24