Installation

Hardware Installation

NOTES

• Make sure you have a personal computer with

an open USB port before connecting the drive
to your computer.
• Power for all device should be turn off before
attaching the cables.
To AC wall outlet.

USB converter cable

Connecting to computer
Connect the drive to the computer as shown in
figure. NOTES

• Please do not connect the AC adapter and

Connect the USB converter cable to the
USB 2.0 converter cable by any means other
External Super Multi DVD Rewriter.
than specified above.
• The machine does not have an ON/OFF
Connect the other end of the USB switch. As soon as it is connected to the AC
converter cable to your computer. power, the power up sequence begins.
The power supply cord is intended to serve
as the main disconnect device. The power
Connect the AC adapter plug to the outlet shall be near the equipment and shall
power connector at the rear of the drive. be easily accessible.
Attach the AC adapter to the AC wall • The appliance is not intended for use by
outlet. young children or infirm persons without
supervision.
• Young Children should be supervised to
When the computer is ready, confirm that ensure that they do not play with appliance.
the drive is detected. And then, insert the • If the appliance is supplied from a cord
supplied software CD into the External extension set or an electrical portable outlet
Super Multi DVD Rewriter and install the device, the cord extension set on electrical
software. portable outlet device must be positioned so
that it is not subject to splashing or ingress of
moisture.
 Location and function of controls
This following is the general figure of the design of the drive.
The drive’s appearance and specifications may change without prior notice.

Front

1. Disc Tray
2. Drive activity indicators
The LED used to indicate the operation of
External Super Multi DVD Rewriter.
3. Emergency Eject Hole
4. Stop/Eject Button
1 2 3 4

Rear
1. USB Connector
This connector is used to connect to the USB
converter cable.
2. Power Connector
This connector is used to connect to the AC
Power adapter cord.

1 2

Removing the USB converter cable

The drive supports the plug and play(not swap) function of Windows, and can be removed and inserted by
performing the following operation.

1. Stop the application software being currently used.

2. Click the icon “ ” of the taskbar located on your screen’s bottom right side.

3. Click “Safely Remove USB Mass Storage Device-Drive[x:]”.

4. Click “Ok” and then remove the USB converter cable.

NOTE

Don’t remove the USB converter cable when the busy indicator on the drive blinks, or during computer startup.
 External GSA-E40N
Quick Set-up Guide Super Multi DVD Rewriter GSA-E40L

To install of your product, please read this guide manual carefully and completely. For the detailed owner’s manual of the drive,
please refer to the CD manual.

Features System Environment

• Universal Serial Bus (USB) 2.0 interface for high-speed data transfer. Computer
• Buffer Under Run error protection technology This unit can be operated in the system environment explained here.
• Emergency eject support
System CPU Pentium III 1.0GHz or Higher(with USB 2.0) for basic
• Bear media loading with power eject.
requirements performance (Recommended for optmal performance:
• Combination of CD-R/RW, DVD-R/RW, DVD+R/RW, DVD+R DL, DVD-R Pentium IV 3.0GHz or Higher).
DL and DVD-RAM drive functions into one drive. Memory 256MB or larger (Recommended: 512MB).
• Supports region playback control Phase II. Hard disk 20GB or more free space. (The free space needed for writing
• Supports LightScribe Direct Label Printing Technology - *Optional. depends on the quantity of data.)
* You can use a variety of Drive Video Memory 64MB (Recommended: 128MB).
Interface USB 2.0 port
GSA-E40L GSA-E40N
CD-ROM drive For Software installation
Light Scribe X
Software Required OS Windows Vista/Windows 2000 Professional (SP4)/
I/F USB 2.0 only USB 2.0 only Windows XP Home Edition/Professional (SP1,SP2) Direct X 9.0
or Higher is required
Package Items
CD-R, CD-RW, CD-R : LG, Mitsubishi Kagaku Media, Verbatim, Taiyo Yuden or
Item Quantity DVD-R, DVD-RW, TDK discs are recommended.
DVD+R, DVD+RW, CD-RW : LG, Ricoh, Mitsubishi Kagaku Media, Verbatim discs
- External Super Multi DVD Rewriter 1 DVD-RAM, are recommended.
- USB 2.0 converter cable 1 DVD±R DL discs DVD-R : Maxell, Mitsubishi Kagaku Media, Taiyo Yuden are
- AC Power Adapter (with Power supply cable) 1 recommended.
DVD-RW : JVC, Mitsubishi Kagaku Media are recommended.
- Software CD 1
DVD+R : Mitsubishi Kagaku Media, Verbatim are
- Quick Guide for Drive 1 recommended.
DVD+RW : Mitsubishi Kagaku Media, Verbatim are
Cautions recommended.
DVD-RAM : Maxell, Panasonic are recommended.
System meeting the following requirements is needed in order to use USB
DVD±R DL : Mitsubishi Kagaku Media, Verbatim are
2.0 operation with this drive. recommended.
• Computer that is equipped with a USB 2.0 – compliant USB connector or PCI
adapter card, and on which the USB 2.0 EHCI (Enhanced Host Controller * For Optimal 18x writing, Pentium IV 3.0GHz or higher, ICH6 or higher are recommended.
Interface) driver software 1) has been installed. * For Windows Vista, 512MB of RAM or large is recommended.
1) The USB 2.0 EHCI driver software is supplied with currently available PCI * Compatibility problem in write/read function may occur with some media depending on the media
adapter cards that conform to USB 2.0. Further, Microsoft has released the USB manufacturing quality.
2.0 EHCI driver software for Windows XP, therefore it is also possible to use this * For DVD±R 18x support media: Mitsubishi Kagaku Media, That’s, Maxell (MID: MAXELL 003, MXL
driver software with Windows XP. RG04) are recommended.
If you want to know in detail, please contact your USB 2.0 adapter dealer or * To achieve maximum Record & Write speed your system may require data to be copied first to the
computer’s hard drive rather than directly from another source disc or drive.
consult your PC manufacturer, or consult the Microsoft Corporation Web site.

Specifications
Supported Discs DVD-ROM(Single/Dual), DVD-RW, DVD-R, Data transfer rate
DVD+RW, DVD+R, DVD+R Double layer, DVD-R Sustained CD-ROM : 7200 Kbytes/s (48X max)
Dual layer, DVD- RAM, CD-Digital Audio & DVD-ROM : 22160 Kbytes/s (16X max)
CD-Extra, CD-Plus, CD-ROM, CD-ROM XA-Ready, Average Access CD-ROM : 125msec (Typical)
CD-I FMV, CD-TEXT, CD-Bridge, CD-R, CD-RW, Time (1/3 Stroke) DVD-ROM : 145msec (Typical)
Photo-CD (Single & Multi-Session), Video CD, DVD-RAM : 270msec (Typical)
DVD-VIDEO Buffer capacity 2 Mbytes
Dimensions (WxHxD) 160 x 50 x 230mm MTBF 100,000 Power On Hours (Duty Cycle 10%)
Weight About 1.50Kg Read/Write CD-R, CD-RW, DVD-RW, DVD+RW, DVD-RAM,
Interface USB 2.0 DVD±R DL
Read/Write Speed Writing Methods CD:Disc-at-once, Track-at once, Session at once,
Write : CD-R: 4X, 8X, 16X, 24X, 32X, 40X, 48X Packet Write
CD-RW: 4X, 10X, 16X, 24X, 32X DVD:Random write, Sequential write
DVD-R: 2X, 4X, 8X, 16X, 18X Power Requirement AC Adapter
DVD-RW : 1X, 2X, 4X, 6X Input 100-240Vac, 0.6A 47-63 Hz
DVD+R: 2.4X, 4X, 8X, 12X, 16X, 18X Output 12Vdc 2A (max 2.5A)
DVD+RW: 2.4X, 4X, 6X, 8X Operating Environment
DVD-RAM: 2X, 3X, 3X-5X(Ver.2.2), 6X, 6X-8X, 6X-12X Temperature 5 to 35 degC
DVD+R DL: 2.4X, 4X, 6X, 8X, 10X Humidity 20 to 80 %
DVD-R DL: 2X, 4X, 6X, 8X, 10X Storage Environment
Temperature -20 to 55 degC
Read : CD-ROM/R: 48X max Humidity 15% to 85% RH
CD-RW: 40X max
CD-DA(DAE): 40X max
DVD-ROM (Single/Dual): 16X/12X max
DVD+/-RW: 13X max Software
DVD+/-R: 16X max Install the appropriate CD Recording Authoring Software before using this unit.
DVD-VIDEO: 4.8X max * Please uninstall any previous CD burning software you may have loaded on
DVD-RAM: 12X max your PC in order to prevent possible compatibility issues.
DVD±R DL: 12X max Once you have installed the application software, you may (if you wish) begin to
reinstall previous software, taking note for errors. We recommend using the drive
❋ The drive’s appearance and specifications may change without prior notice. with the latest software as some problems encountered when using the drive can
be solved by updating the software.
- The maximum data transfer rate varies according to the performance
capabilities of the PC. Please visit www.lgservice.com and install the program,
- For the sake of periodic improvements, specifications and appearance are “LG ODD Online F/W update.” By using the program,
subject to change without notice. you can automatically check the latest information about FirmWares and
- We have taken all possible measures to assure the quality of our products, update the FirmWare.
but we cannot be responsible for the consequences if defect occurs.
Worldwide support ; http://www.LGservice.com
P/NO. 3828HN1012N Ver. A Worldwide corporate site : http://www.LGE.com
Safety Instructions
PERICOLO : Il dispositivo di lettura e scrittura utilizzato in questo
CAUTION: The laser used in the External Super Multi DVD Rewriter
masterizzatore utilizza un raggio laser che, se osservato da vicino, può
can damage your eyes. Do not attempt to open the cover. To reduce
the risk of electric shock, do not remove the cover (or back). danneggiare la vista. Evitare di smontare il coperchio dell’apparecchio.
There are no user-serviceable parts inside. Refer servicing to qualified Al fine di prevenire eventuali folgorazioni, evitare di smontare
service personnel. Use of controls or performance of procedures other l’apparecchio. All’interno dell’apparecchio non sono presenti parti che
than those specified herein may result in hazardous radiation exposure. richiedono manutenzione da parte dell’utente. In caso di difetti o
guasti, rivolgersi ad un Centro di Assistenza Tecnica. L’esecuzione di
WARNING: To reduce the risk of fire or electric shock, do not expose
procedure diverse da quella espressamente indicate in questo
this appliance to rain or moisture.a
manuale può provocare pericolose esposizioni alle radiazioni laser.
ATTENZIONE: Al fine di evitare cortocircuiti o principi di incendio,
evitare di esporre questo apparecchio alla pioggia o ad una eccessiva
VORSICHT : Der in diesem External Super Multi DVD -Laufwerk umidità ambientale.
benutzte Laser kann Ihre Augen schädigen. Versuchen Sie keinesfalls,
die Abdeckung zu öffnen. Um die Gefahr eines elektrischen Schocks
zu reduzieren, sollten Sie die Abdeckung (oder Rückseite) keinesfalls PRECAUCION: El láser utilizado en la unidad External Super Multi
entfernen. Im Inneren des Geräts befinden sich keine Teile, die vom DVD puede dañar sus ojos. No intente abrir la tapa. Para reducir el
Benutzer selbst gewartet werden können. Überlassen Sie die Wartung riesgo de descarga eléctrica, no quite la tapa (ni la parte posterior).
qualifizierten Kundendiensttechnikern. Beachten Sie bei der Benutzung No hay piezas internas que deba mantener el usuario.
von Bedienelementen und der Durchführung von Prozeduren El servicio de mantenimiento debe efectuarlo personal técnico cualificado.
unbedingt die Anweisungen dieses Handbuchs, da andernfalls El uso de controles o la ejecución de procedimientos distintos de los
gefährliche Strahlung freigesetzt werden kann. especificados en este manual pueden ser causa de exposición a
WARNUNG : Setzen Sie das Laufwerk keinesfalls Regen oder radiación peligrosa.
Feuchtigkeit aus, um die Gefahr eines Brandes oder elektrischen ADVERTENCIA: Para reducir el riesgo de fuego o descarga eléctrica,
Schocks zu reduzieren. no exponga este aparato a la lluvia ni a la humedad.

CUIDADO: O laser utilizado na unidade Super Multi DVD pode causar

ATTENTION: l'exposition au laser utilisé dans le super graveur multi-DVD
présente un danger pour les yeux. N'essayez pas d'ouvrir le capot. lesões oculares. Não tente abrir a tampa. Para reduzir o risco de
Afin de réduire les risques de chocs électriques, ne retirez pas le capot choques eléctricos, não retire a tampa (quer frontal quer superior ).
(ni l'arrière du dispositif). Aucune pièce interne ne peut être remplacée par A unidade não contém peças que possam ser reparadas pelo utilizador.
l'utilisateur. Pour la maintenance de l'appareil, adressez-vous au personnel Deixe a manutenção para um técnico da assistência qualificado.
qualifié du service de maintenance. L'utilisation de commandes ou de A utilização de controlos ou a execução de procedimentos que não
procédures différentes de celles spécifiées ci-après peut entraîner une sejam os especificados neste manual podem causar a exposição a
exposition à des rayons dangereux. radiações perigosas.

AVERTISSEMENT :Ne pas exposer ce matériel à la pluie ou à AVISO: Para reduzir o risco de incêndio ou choque elétrico não
l’humidité (risques d’incendie et d’électrocution). exponha este aparelho á chuva ou humidade.

This product is manufactured to comply with the radio interference Industry Canada requirement
requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC. This class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
Dieses Produkt erfüllt die Funkstörungsanforderungen folgender Normen:
89/336/EEC, 93/68/EEC und 73/23/EEC. du Canada.

Ce produit a été fabriqué conformément aux prescriptions EEC DIRECTIVE FCC COMPLIANCE STATEMENT
89/336/EEC, 93/68/EEC et 73/23/EEC.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Questo prodotto risponde alle direttive CEE 89/336, 93/68 e 73/23, relative
alla compatibilità elettromagnetica.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
Este producto ha sido fabricado cumpliendo los requisitos sobre interferen- generates, uses, and can radiate radio frequency energy and, if not
cias de radio de la DIRECTIVAS CEE 89/336/CEE, 93/68/CEE y 73/23/CEE. installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
CLASS 1 LASER PRODUCT If this equipment does cause harmful interference to radio or
KLASSE 1 LASER PRODUKT television reception, which can be determined by turning the
LUOKAN 1 LASER LAITE
equipment off and on, the user is encouraged to try to correct the
KLASS 1 LASER APPARAT
CLASE 1 PRODUCTO LÁSER interference by one or more of the following measures:
CLASSE 1 PRODOTTO LASER - Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
CAUTION : CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION which the receiver is connected.
WHEN OPEN. AVOID EXPOSURE TO THE BEAM. - Consult the dealer or an Authorized Service Center for help.
ADVARSEL : KLASSE 3B SYNLIG OG USYNLIG LASERSTRÅLING VED • FCC WARNING
ÅBNING. UNDGÅ UDSÆTTELSE FOR STRÅLING. Changes or modifications not expressly approved by the party
ADVARSEL : KLASSE 3B SYNLING OG USYNLIG LASERSTRÅLING responsible for compliance could void the user’s authority to operate
NÅR the equipment.
DEKSEL ÅPENS. UNNGÅ EKSPONERING FOR STRÅLEN. • This Super Multi DVD Rewriter is for use only with UL listed personal
computers that have installation instructions detailing user-installation
VARNING : KLASSE 3B SYNLING OCH OSYNLIG LASERSTRÅLNING
of card cage accessory.
NÄR DENNAL DEL ÄR ÖPPNAD. STRÅLEN ÄR FARLIG.
VARO! : KURSSI 3B NÄKYVÄ JA NÄKYMÄTÖN AVATTAESSA OLET
ALTTIINA LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEN. ■ Microsoft® and Windows® are trademarks registered in the United
States and other countries by the Microsoft Corporation.
■ The company names and product names written in this manual are
trademarks or registered trademarks of the respective companies.