Atlas Copco Air Compressors

GA90-500 & GR110-200

Oil-injected rotary screw compressor series
with Full Feature & Variable Speed Drive versions

ALL-IN-ONE
PACKAGE
 The Total Energy Saving concept…

The shortest route to maximizing your profitability is to saving energy in every conceivable way. This focus

minimize operational cost. Because energy consumption is is the basis for a total product development concept

the major factor in a compressor’s life cycle cost, the focus in that encompasses every stage of R&D, manufacturing,

the design of the Atlas Copco GA and GR-compressors is on installation and after sales service.

The thorough needs assessment

Real savings rely on facts. Atlas Copco

consultants assess the air demand profile

of your application and suggest the best

compressor selection for the job.

Energy
Circle

The right core technology

Atlas Copco masters every compression

principle and provides the most energy
efficient technology for the required

pressure and flow.

The best drive arrangement

Fixed speed machines are fine when they can

run at full load most of the time. But when air

demand fluctuates, the Variable Speed Drive

can achieve substantial savings of up to 35 %.

 The lowest
operating cost

The highest
reliability

Shaft power
100%

Radiant Remaining heat

losses in compressed air
2% 4%

Energy recovery

Heat from the compression process

The professional follow-up
can be recovered and put to good
Recoverable energy An Atlas Copco Service Contract will
94%
use in endothermic processes, heating
ensure you of the correct preventative main-
of buildings, etc.
tenance, immediate response and genuine

spare parts… all over the globe.

The trouble-free installation &

commissioning

An Atlas Copco GA-compressor is truly

The fully optimized system
plug-and-play. Put the machine on a flat floor,
A multi-compressor installation can be
connect the power line and the compressed air
centrally controlled, to achieve a tight pressure
outlet… and push the start button.
band and the lowest overall energy cost.
… combined with the Total Reliability concept

An energy efficient machine saves money only if it runs For over a century, Atlas Copco has been building

reliably around the clock. And not just today, but day after machines that stand the test of time. With the proven GA/GR-

day, year after year; with minimal service interventions and compressors, reliability has never been so timeless.

long overhaul intervals.

The experienced partner

Reliability Atlas Copco is the world leader in

Circle compressed air technology, with

over 100 years of experience in air

compression systems.

The integrated design

Internal piping, integral air dryer, integrated

Variable Speed Drive, 100 % matched

components, consolidated controls…

the only way to ensure total reliability.

The complete solution

Compressor, dryer, drive, filters,

control system… they all carry the same

mark of quality: the Atlas Copco logo.

Pushing the limits in
energy efficiency

Pushing the limits in reliability

Proven technology Capacity range (50 & 60 Hz)
GA90-315-FF, GA132/180/315 VSD-FF, GA315W-500W, GR110-200-FF

in one package GR110-200-FF

GA90-160

GA132 VSD

GA180 VSD

GA200-250

The GA/GR90-500 range comprises a series of

GA315 VSD

GA315W-500W

no-nonsense machines with a robust and reliable design,

0 420 850 1270 1700 2120 2540 2970 cfm
easy to service and environmentally friendly. They are 0 200 400 600 800 1000 1200 1400 l/s

the culmination of decades of continuous improvement, VSD: Variable Speed Drive / FF: Full Feature / W: watercooled
See data pages for range details
radical innovation and interaction with the customer.

Within this range, the Total Energy Saving Concept

GR200-FF
takes solid form in the GA132/180 VSD and 315 VSD-FF Two-stage high pressure
version
compressors. They integrate a complete quality compressed
GR110-200-FF
air system in a compact package, featuring the ID dryer
and the low energy Variable Speed Drive.
GA110-FF
Single-stage version

GA90-160
Excellence by design

GA180 VSD
Standard G-compressor packages and Full Feature (FF) units Variable Speed Drive version

– all vital components and standard options integrated, for a

complete ‘all-in-one’ installation GA132-180 VSD

Complete, ready-to-use compressor package

Easy, low cost installation – no foundations
GA250-FF
True performance according to ISO 1217, Annex C, ed. 3 Twin element version
Cost-effective and reliable Elektronikon® monitoring
and control system GA200-315

Single-stage, twin-element and two-stage HP versions

Proven reliability
GA315 VSD-FF
Straightforward and minimal maintenance Variable Speed Drive version
Operator and service-friendly
Silenced package – environment friendly GA315 VSD

Optional energy recovery system

Water and aircooled versions GA400W
Twin element version
A wide range of pressure and capacity variants
Backed by a global sales and service organization

GA355-500
 A complete scope to meet every need
Most features are included as standard. Some applications may need or benefit from additional options.

Included as standard
Air intake filter
Air intake valve (not on VSD units) Built-in electrical starters
Aftercooler/Oilcooler (air or watercooled) Flexible vibration dampers
Cooling fan for aircooled units Air/oil separator
Ventilation fan for watercooled units Elektronikon® control system
Water separators Full load/no load regulation system (not on VSD units)
Oil filters Silencing canopy
Complete air/oil/water circuit Single point inlet and outlet connections
IP 55, Class F with B rise Structural steel skid – no foundations needed

GA355W-500
GA132 VSD

GA180 VSD

GA315 VSD
GR110-200
GA90-315
Available options
Full Feature: integrated ID refrigerant dryer • • • • (1) na
Integrated DD pre-filter (only with integrated dryer) • (2) • • • na
Energy recovery • na na na • •
Modulation control • • na na na •
OSD oil separator (for pack/FF units) (3) • • • • • •
Oil containing frame • • • • na •
Electronic water drain (EWD) • (2) • • (4) •
Heavy duty air intake filter • • • • • •
HAT version (122°F ambient temperature) (5) na na na na •
Phase sequence relay • • na na na •
PT 1000 thermal protection for main motor • • na na na •
Anti condensation heater for main motor • • na na na •
Cooling water solenoid valve • • • • • •
Freeze protection, 15°F (for pack units only) • • na na na •
Nema 4 cubicle • • na na na •
BSP/NPT connections (6) • • • na na
DIN/ANSI flanged connections (7) na na na • •
Anchor pads • • • • • •
Performance test certificate • • • • • •
Witnessed performance test certificate • • • • • •
Material test certificate for pressure vessel approvals • • • • • •
Sea-worthy packaging • • • • • •
Rain protection • • na na na •
IT/NT system na na • • • na
Tube cooler • • na na na •
SPM monitoring • • • • • •

(1) Integrated VSD refrigerant dryer (5) Not available for 200 psig versions and FF units Atlas Copco can engineer virtually any option
(2) Only for GR 200 psig (6) Applies only to GA90-160 through our specials group.
(3) Effluent purity of 10 mg oil/liter (7) Applies only to GA200-315
(4) Standard na: not applicable
 GA90-160-FF
single-stage series...

GA110-FF
Aircooled Full Feature model
Quality air with low Simple and efficient
Full Feature (FF) variant
oil content regulation system
with integrated ID dryer
Oil separator vessel
three step air-oil separation reliable, efficient load/no load
(centrifuge, gravity, filter) or optional modulating control
oil content: less than 3 ppm few moving parts –
by weight minimal maintenance
hinged cover for easy separator largely dimensioned –
element change minimal pressure drop

Advanced Elektronikon®
control and monitoring
Compressor element system
bearings

Regulation system

Superior element bearings

high stability under varying process conditions

adapt well to changing loads

extended element lifetime

Designed for optimal performance
– rotors revolve at low speeds minimizing wear on bearings
Split positioning of components in the cool or warm half
– low operating temperatures and reduced bearing load
for ultimate efficiency and maximum capacity
 ... big on integration – small in footprint

Moisture separator Full Feature variant for dry air Advanced Elektronikon® control and monitoring system
as standard with integrated ID dryer overall system performance status with pro-active service indications,
a cyclonic moisture separator, by-pass system as standard alarms for malfunctions and safety shutdowns
with automatic and manual R404A refrigerant meets envi- multi-language selectable display
drain, mounted as standard, ronmental regulations all monitoring and control functions via one interface
after the cooler block quality end product and wide communication possibilities

system protection integration possible in many process control systems (field bus sys-

tem)

GA 90-160-FF air/oil flow (loaded condition)

ID DRYER COMPRESSOR

Dry air out

Air in

Motor and compressor permanently aligned

unlike belt-driven compressors, GA/GR compressors incorporate a

flanged motor/coupling housing - gearbox/element, offering permanent
alignment during transport, installation and operation of the unit.
incoming air
highly efficient, totally enclosed fan-cooled electric motor wet air
refrigerant liquid dry air
(IP55, Class F) refrigerant gas/liquid air/oil mixture
refrigerant gas condensate
refrigerant compressed gas oil
 GA200-315-FF & GA355-500
twin element series ...

Advanced Elektronikon® control

GA250-FF and monitoring system
Aircooled Full Feature model Practical cooler cleaning Easy oil filter exchange

hinged fans, fan motors and position of the spin on/off car-

Air outlet filter cowls for easy cooler cleaning tridge type oil filters allows for
Twin cooling fans
twin fans for optimal cooling clean and easy exchange, with-

axial cooling fans driven by out oil spills

separate TEFC electric motors

(IP55 protection)

Air inlet filters

Oil filters
Twin element

GA400W
Watercooled model

Twin element design Protective air filtration

larger volume of air delivered, highly efficient dry paper car-

using less power, compared to tridge

equivalent compressor sizes compressor protection from

Atlas Copco guaranteed pro- foreign particles ( 99.9 %

duction, quality control for 3 micron – SAE fine )

and service extends system lifetime

 ... for highest efficiency and reliability

Dry quality air to the application point*

air outlet filter fitted as standard GA200-315-FF air/oil flow (loaded condition)
ID DRYER COMPRESSOR
particle removal down to 1 micron; Dry air out Air in

maximum remaining oil aerosol of 0.1 ppm

* for GA200-315-FF versions

refrigerant liquid incoming air

refrigerant gas/liquid wet air
refrigerant gas dry air
refrigerant compressed gas air/oil mixture
condensate
oil

GA355W-500W air/oil/cooling flow (loaded condition)

Air in Air out

Twin element on single drive & gear casing

efficiencies far superior to designs using one large element or 2-stages

extended lifetime due to reduced loads on bearings, rotors and gears

highly efficient motor – IP55 protection, class F insulation incoming air

outgoing air
air/oil mixture
water
oil
 GR110-200-FF
two-stage high pressure series ...

For high pressure applications requiring a reliable air

Advanced condition monitoring
supply of 200 and 290 psig, the Atlas Copco GR110-200-FF
one integrated control and monitoring system
oil-injected screw compressors are the right choice. Not
for compressor and dryer
only do these workhorses offer every feature and benefit the
GA series is renowned for, but the two-stage design also
guarantees the most efficient operation at higher pressure.

The GR range selection

GR110 and GR200 – available in 290 psig version

GR110, GR160 and GR200 – available in 200 psig version

GR-FF – Full Feature versions with integrated ID dryer

GR200-FF

Aircooled Full Feature model

Two-stage
compression elements
 ... in 200 psig and 290 psig versions

GR Full Feature: compact ‘all-in-one’ package

optional dry quality air variant, with integrated

Full Feature (FF) version
ID dryer and filters with integrated ID dryer
by-pass system included as standard

R404A refrigerant, meets environmental regulations

quality end product and system protection

standard equipped with moisture separator

a complete scope with many options

The GR design criteria

designed to the same stringent criteria

as the proven GA90-315 series

built for high pressure applications

very complete pack unit - options available

air or water cooled version

GR110-200-FF air/oil flow (loaded condition)

ID DRYER COMPRESSOR
Dry air out Air in

Two-stage compression elements

increased efficiency and reliability

extended element lifetime due to reduced load
on bearings, rotors and gears incoming air
wet air
refrigerant liquid dry air
refrigerant gas/liquid air/oil mixture
refrigerant gas condensate
refrigerant compressed gas oil
 GA132/180 VSD & GA315 VSD-FF
with Variable Speed Drive ...

The GA132/180/315 VSD houses the famous VSD ID – Integrated VSD dryer*

generates additional savings of up to 25 %

variable drive system that brings an unprecedented level
compared to a fixed speed refrigerant dryer
of energy savings. In addition, the GA315 VSD-FF incor-
designed for high ambient humidity conditions
porates a VSD regulated ID refrigeration dryer
to further reduce the energy consumption.
* on GA315 VSD-FF

GA315 VSD-FF

Aircooled Full Feature model

Advanced Elektronikon® control

and monitoring system

GA315 VSD-FF air/oil flow (loaded condition)

ID DRYER COMPRESSOR

Dry air out Air in

Highly efficient
compression element

Most efficient element performance

longer active rotor length allows larger air volume incoming air
wet air
to be compressed refrigerant liquid dry air
refrigerant gas/liquid air/oil mixture
higher built-in pressure ratio for higher efficiency refrigerant gas condensate
refrigerant compressed gas oil
 ... for the lowest cost compressed air

Because a VSD compressor precisely follows the Direct energy savings of 15 to 35 %

varying air demand that is typical in most production Low load operation of a VSD compressor does not result

facilities, it dramatically reduces the energy bill and pro- in energy losses.

vides many additional benefits. The result is a fast pay- Load/no load transition losses are eliminated.

back of the investment and huge yearly savings The precise pressure control of the VSD compressor allows

long after that. for a tighter and often lower discharge working pressure,

resulting in reduced energy consumption.

Because energy constitutes the biggest portion of the

life cycle cost of a compressor, these savings have a sig-
nificant impact on the operational costs of your com-
pressed air system.

STABLE NET PRESSURE

Pressure - Standard load-unload - 7.25 psig

Pressure - turbo-modulating - 3 psig
Pressure - VSD - 1.5 psig

7
psig

Process pressure
investment energy savings with VSD
maintenance

energy

Predicting your savings Indirect savings

Call upon the expertise of Atlas Copco specialists and have an The lowered net pressure obtained by the VSD compressor

assessment carried out in your factory. provides additional yearly savings:

A detailed report will show your current operation and the – other base-load compressors will consume up to

achievable savings when adding a VSD solution to your com- 5 % less energy

pressed air system. – leak losses - always present in compressed air systems -

are significantly reduced: e.g. leakage at 85 psig would

be 13 % less than at 100 psig

– many compressed air applications consume less air

at a reduced pressure, similar to leak reduction.

In addition to the direct savings, these indirect benefits can

add up to another 10 % energy savings in the complete

compressed air installation.

Additional VSD benefits

The constant net pressure provides stability for all

processes making use of compressed air. NO CURRENT PEAKS

Current peaks during start-up are eliminated
800
– VSD compressors can be started and stopped without

% Full load current

limitation Star Delta
DOL
– frequent start-stops no longer lead to current peak 400 Soft Starter
VSD
penalties

– the electrical installation can often be rated for a lower

current, meaning savings in investment. 0 10 20

Seconds

Integrated VSD - The only way

All Atlas Copco VSD compressors are EMC tested and certified. External
sources do not influence the compressor operation, nor does the compressor Mechanical enhancements are made to ensure
disturb other equipment via emissions or via the power supply line. that gears and bearings receive proper lubrica-
tion at all speeds and that all components oper-
ate well below critical vibrations.

The Elektronikon® system controls both the com-

pressor and the integrated converter; this ensures
maximum machine safety and allows easy net-
working of the compressor.

Special attention is given to the electric motor,

which is specifically designed for VSD operation
(inverter duty motors). Bearings are protected
against induced bearing currents and both motor
and converter are perfectly tuned to obtain the
best efficiency over the entire speed range.
The machine is tested for the complete speed
range to eliminate all "speed windows" that can COMBINED MOTOR/CONVERTER EFFICIENCY
jeopardize the energy savings and the stable net
pressure. 100 %

OPERATING RANGE
non-integrated solution
integrated VSD
Atlas Copco integrated solution non-integrated VSD

speed windows

flow
minimum maximum minimum maximum
motor speed
 Optimize Global presence -
your installation local service

Some applications may need or benefit from addi-

tional options and more refined control and air treatment
systems. Tailored to the need, Atlas Copco
has developed compatible equipment, further enhancing
systems reliability and quality.

DD/DDp/PD/PDp/QD Filters Atlas Copco's Aftersales Service operation is unrivaled

For proper removal of oil vapour
and particles, select the adequate filter in the compressed air industry.
from the Atlas Copco filter range

Nominal airflow: 19 - 15,000 cfm

High quality service is delivered locally: Atlas Copco's
DD coalescing filter: removing oil aerosol
Aftersales is present in 150 countries around the world.
to 0.1 ppm (0.1 mg/m3) and particles down to 1 micron

DDp dust filter: removing particles down to 1 micron

Our service plans perfectly meet the requirements of
PD coalescing filter: removing oil aerosol to 0.01 ppm
your business and ensure a constant productivity at
(0.01 mg/m3) and particles down to 0.01 micron
peak level.
PDp dust filter: high efficiency particle removal

down to 0.01 micron

Consultancy services and on-site measurements help
QD oil vapour filter: maximum remaining oil content
optimizing the complete air net, minimizing leak losses
of 0.003 ppm (0.003 mg/m3).
and maximizing energy savings.

OSD - oil/water separator A sophisticated logistics concept brings genuine parts

Oily waste water drainage problems to your doorstep in record times, across the globe.

with oil-injected compressors can be After all, only genuine Atlas Copco parts, produced on

efficiently overcome. Either integrated the same assembly lines as your compressor, can

or free-standing, Atlas Copco has the guarantee a long lifetime and uninterrupted operation.

appropriate system solution, meeting

with legal directives.

Technical data
GA compressor range - 60 Hz

Compressor Maximum working pressure Capacity FAD (1) Installed Noise Weight
type motor level (2)
Pack Full Feature Pack / Full Feature Pack Full Feature

psig psig cfm l/s m / min

3
hp dB(A) lb lb
GA90-160 Single-stage

GA90 - 100 107 104 631 298 17.9 125 76 5545 6228
GA90 - 125 132 128 559 264 15.8 125 76 5545 6228
GA90 - 150 157 153 506 239 14.3 125 76 5545 6228
GA90 - 200 200 196 405 191 11.5 125 76 5545 6228

GA110 - 100 107 104 748 353 21.2 150 76 5545 6228
GA110 - 125 132 128 665 314 18.8 150 76 5545 6228
GA110 - 150 157 153 612 289 17.3 150 76 5545 6228
GA110 - 200 200 196 489 231 13.9 150 76 5545 6228

GA160 - 100 107 104 989 467 28.0 200 76 6669 7397
GA160 - 125 132 128 890 420 25.2 200 76 6669 7397
GA160 - 150 157 153 826 390 23.4 200 76 6669 7397
GA160 - 200 200 196 678 320 19.2 200 76 6669 7397

GA200-315 Twin

GA200 - 100 107 104 1242 586 35.1 250 76 10928 11810
GA200 - 125 132 128 1128 532 32.0 250 76 10928 11810
GA200 - 150 157 153 1024 483 29.0 250 76 10928 11810

GA250 - 100 107 104 1448 683 41.0 300 76 11149 12030
GA250 - 125 132 128 1314 620 37.1 300 76 11149 12030
GA250 - 150 157 153 1206 569 34.1 300 76 11149 12030
GA250 - 200 200 196 1011 477 28.6 300 76 11149 12030

GA315 - 100 107 104 1647 777 46.5 350 76 11590 12470
GA315 - 125 132 128 1499 707 42.3 350 76 11590 12470
GA315 - 150 157 153 1399 660 39.5 350 76 11590 12470
GA315 - 200 200 196 1177 555 33.2 350 76 11590 12470

GA355W-100 107 - 2191 1032 62.1 450 73 17110/17331 -

GA355W-125 132 - 1992 940 56.5 450 73 17110/17331 -
GA355W-150 157 - 1761 831 49.9 450 73 17110/17331 -
GA355W-200 200 - 1466 692 41.6 450 73 17110/17331 -

GA400W - 100 107 - 2394 1128 67.9 500 74 18433/17551 -

GA400W - 125 132 - 2208 1042 62.6 500 74 18433/17551 -
GA400W - 150 157 - 1981 935 56.2 500 74 18433/17551 -
GA400W - 200 200 - 1661 784 47.1 500 74 18433/17551 -

GA450W - 100 107 - 2835 1334 80.4 600 75 18433/19007 -

GA450W - 125 132 - 2589 1222 73.4 600 75 18433/19007 -
GA450W - 150 157 - 2386 1126 67.7 600 75 18433/19007 -
GA450W - 200 200 - 1998 943 56.7 600 75 18433/19007 -

GA500W-100 107 - 3217 1518 91.2 700 76 17551 -

GA500W-125 132 - 2975 1404 84.4 700 76 17551 -
GA500W-150 157 - 2746 1296 77.9 700 76 17551 -
GA500W-200 200 - 2361 1114 66.9 700 76 17551 -

GA500W figures are for medium voltage IP 23 motor

W: watercooled
Technical data
GA-VSD / GR compressor range - 60 Hz

Compressor Maximum working pressure Capacity FAD (1) Installed Noise Weight
type motor level (2)
Pack Full Feature Pack / Full Feature Pack Full Feature

psig psig cfm l/s m3/ min hp dB(A) lb lb

GA132/180/315 VSD

GA132 VSD - 58 58 - 856 404 24.2 177 75 8533 9261

GA132 VSD - 110 110 - 846 399 23.9 177 75 8533 9261
GA132 VSD - 145 145 - 752 355 21.3 177 75 8533 9261
GA132 VSD - 200 200 - 636 300 18.0 177 73 8533 9261

GA180 VSD - 58 58 - 1021 482 28.9 250 75 8533 9261

GA180 VSD - 110 110 - 1013 478 28.7 250 75 8533 9261
GA180 VSD - 145 145 - 886 418 25.1 250 75 8533 9261
GA180 VSD - 200 200 - 746 352 21.1 250 73 8533 9261

GA315 VSD - 58 58 - 1810 854 51.2 390 75 13563 14553

GA315 VSD - 110 110 - 1795 847 50.8 390 75 13563 14553
GA315 VSD - 200 145 - 1505 710 42.6 390 75 13563 14553

GR110-200 Two-stage 13 bar

GR110-200 200 196 553 261 15.6 150 72 6908 7634

GR160-200 200 196 742 350 21.0 200 75 7803 8529
GR200-200 200 196 937 442 26.5 250 78 7803 8529

GR110-200 Two-stage 20 bar

GR110-290 290 286 475 224 13.4 150 72 6908 7634

GR200-290 290 286 814 384 23.0 250 78 7803 8529

(1) Unit performance measured according to ISO 1217, Ed.3, Annex C-1996

Reference conditions:
- absolute inlet pressure 14.5 psi (1 bar)
- intake air temperature 68 °F (20 °C)

C
FAD is measured at the following working pressures:
- 100 psi variants at 100 psi - 7.5 bar variants at 7 bar
- 125 psi variants at 125 psi - 8.5 bar variants at 8 bar
B
A
- 150 psi variants at 150 psi - 10 bar variants at 9.5 bar Dimensions
- 200 psi variants at 193 psi - 13 bar variants at 12.5 bar
- 290 psi variants at 276 psi - 20 bar variants at 19 bar

Compressor Dimensions
(2) Noise level:
type A B C
measured according to Pneurop / Cagi PN8NTC2.2 test code;
tolerance ±3 dB(A) inch inch inch

Integrated dryer: GA90 - 110 109.4 63.0 78.3

pressure dewpoint of integrated refrigerant dryer at reference conditions: 37 to 39 °F GA132 - 160 109.4 74.3 78.3
GA200 - 315 133.3 83.4 94.4
Integrated filter: GA315W-500W 164.3 83.4 98.4
particle removal down to 1 micron and maximum remaining oil aerosol GA132 VSD 133.3 74.2 79.1
of 0.1 ppm GA180 VSD 133.3 74.2 79.1
GA315 VSD 157.4 83.4 94.4
GR110-200 109.4 74.3 78.3
Technical data
GA compressor range - 50 Hz

Compressor Maximum working pressure Capacity FAD (1) Installed Noise Weight
type motor level (2)
Pack Full Feature Pack / Full Feature Pack Full Feature

psig bar(e) psig bar(e) cfm l/s m3/ min kW dB(A) lb kg lb kg

GA90-160 Single-stage

GA90 - 7.5 109 7.5 105 7.25 587 277 16.6 90 72 5545 2515 6228 2825
GA90 - 8.5 123 8.5 120 8.25 551 260 15.6 90 72 5545 2515 6228 2825
GA90 - 10 145 10 141 9.75 492 232 13.9 90 72 5545 2515 6228 2825
GA90 - 13 189 13 185 12.75 392 185 11.1 90 72 5545 2515 6228 2825

GA110 - 7.5 109 7.5 105 7.25 708 334 20.0 110 72 5545 2515 6228 2825
GA110 - 8.5 123 8.5 120 8.25 663 313 18.8 110 72 5545 2515 6228 2825
GA110 - 10 145 10 141 9.75 604 285 17.1 110 72 5545 2515 6228 2825
GA110 - 13 189 13 185 12.75 477 225 13.5 110 72 5545 2515 6228 2825

GA132 - 7.5 109 7.5 105 7.25 850 401 24.1 132 74 6669 3025 7397 3355
GA132 - 8.5 123 8.5 120 8.25 807 381 22.9 132 74 6669 3025 7397 3355
GA132 - 10 145 10 141 9.75 731 345 20.7 132 74 6669 3025 7397 3355
GA132 - 13 189 13 185 12.75 593 280 16.8 132 74 6669 3025 7397 3355

GA160 - 7.5 109 7.5 105 7.25 1000 472 28.3 200 74 6669 3025 7397 3355
GA160 - 8.5 123 8.5 120 8.25 953 450 27.0 200 74 6669 3025 7397 3355
GA160 - 10 145 10 141 9.75 869 410 24.6 200 74 6669 3025 7397 3355
GA160 - 13 189 13 185 12.75 725 342 20.5 200 74 6669 3025 7397 3355

GA200-500 Twin

GA200 - 7.5 109 7.5 105 7.25 1278 603 36.1 270 75 10421 4727 11303 5127
GA200 - 8.5 123 8.5 120 8.25 1204 568 34.0 270 75 10421 4727 11303 5127
GA200 - 10 145 10 141 9.75 1087 513 30.7 270 75 10421 4727 11303 5127
GA200 - 13 189 13 185 12.75 924 436 26.1 270 75 10421 4727 11303 5127

GA250 - 7.5 109 7.5 105 7.25 1548 730 43.7 335 75 11060 5017 11942 5417
GA250 - 8.5 123 8.5 120 8.25 1477 697 41.7 335 75 11060 5017 11942 5417
GA250 - 10 145 10 141 9.75 1338 631 37.8 335 75 11060 5017 11942 5417
GA250 - 13 189 13 185 12.75 1124 530 31.7 335 75 11060 5017 11942 5417

GA315W - 7.5 109 7.5 - - 1966 928 55.8 420 72 16559 7510 - -
GA315W - 8.5 123 8.5 - - 1831 864 51.9 420 72 16559 7510 - -
GA315W - 10 145 10 - - 1661 784 47.1 420 72 16559 7510 - -

GA355W - 7.5 109 7.5 - - 2225 1050 63.1 475 73 17110 7760 - -
GA355W - 8.5 123 8.5 - - 2053 969 58.2 475 73 17110 7760 - -
GA355W - 10 145 10 - - 1886 890 53.5 475 73 17110 7760 - -
GA355W - 13 189 13 - - 1549 731 43.9 475 73 17110 7760 - -

GA400W - 7.5 109 7.5 - - 2490 1175 70.6 535 74 18433 8360 - -
GA400W - 8.5 123 8.5 - - 2350 1109 66.6 535 74 18433 8360 - -
GA400W - 10 145 10 - - 2142 1011 60.8 535 74 18433 8360 - -
GA400W-13 189 13 - - 1788 844 50.7 535 74 18433 8360 - -

GA450W - 7.5 109 7.5 - - 2750 1298 78.0 600 75 18433 8360 - -
GA450W - 8.5 123 8.5 - - 2628 1240 74.5 600 75 18433 8360 - -
GA450W - 10 145 10 - - 2424 1144 68.8 600 75 18433 8360 - -
GA450W - 13 189 13 - - 2034 960 57.7 600 75 18433 8360 - -

GA500W-7.5 109 7.5 - - 2988 1410 84.7 670 76 17551 7960 - -

GA500W-8.5 123 8.5 - - 2854 1347 80.9 670 76 17551 7960 - -
GA500W-10 145 10 - - 2664 1257 75.5 670 76 17551 7960 - -
GA500W-13 189 13 - - 2263 1068 64.2 670 76 17551 7960 - -

GA500W figures are for medium voltage IP 23 motor

W: watercooled
Technical data
GA-VSD / GR compressor range - 50 Hz

Compressor Maximum working pressure Capacity FAD (1) Installed Noise Weight
type motor level (2)
Pack Full Feature Pack / Full Feature Pack Full Feature

psig bar(e) psig bar(e) cfm l/s m3/ min kW dB(A) lb kg lb kg

GA132/180/315 VSD

GA132 VSD - 4 58 4 - - 856 404 24.2 132 75 8533 3870 9261 4200
GA132 VSD - 7 110 7 - - 846 399 23.9 132 75 8533 3870 9261 4200
GA132 VSD - 10 145 10 - - 752 355 21.3 132 75 8533 3870 9261 4200
GA132 VSD - 13 200 13 - - 636 300 18.0 132 73 8533 3870 9261 4200

GA180 VSD - 4 58 4 - - 1021 482 28.9 180 75 8533 3870 9261 4200
GA180 VSD - 7 110 7 - - 1013 478 28.7 180 75 8533 3870 9261 4200
GA180 VSD - 10 145 10 - - 886 418 25.1 180 75 8533 3870 9261 4200
GA180 VSD - 13 200 13 - - 746 352 21.1 180 73 8533 3870 9261 4200

GA315 VSD - 4 58 4 - - 1810 854 51.2 290 75 13563 6165 14553 6615
GA315 VSD - 7 110 7 - - 1795 847 50.8 290 75 13563 6165 14553 6615
GA315 VSD - 10 145 10 - - 1505 710 42.6 290 75 13563 6165 14553 6615

GR110-200 Two-stage 13 bar

GR110-13 189 13 185 12.75 541 255 15.3 110 72 6908 3140 7634 3470
GR132-13 189 13 185 12.75 653 308 18.5 132 75 6908 3140 7634 3470
GR160-13 189 13 185 12.75 782 369 22.1 160 75 7803 3547 8529 3877
GR200-13 189 13 185 12.75 926 437 26.2 200 76 7803 3547 8529 3877

GR110-200 Two-stage 20 bar

GR110-20 290 20 286 19.75 447 211 12.6 110 72 6908 3140 7634 3470
GR200-20 290 20 286 19.75 816 385 23.1 200 75 7803 3547 8529 3877

(1) Unit performance measured according to ISO 1217, Ed.3, Annex C-1996

Reference conditions:
- absolute inlet pressure 14.5 psi (1 bar)

C
- intake air temperature 68 °F (20 °C)

FAD is measured at the following working pressures:

B
- 100 psi variants at 100 psi - 7.5 bar variants at 7 bar A
Dimensions
- 125 psi variants at 125 psi - 8.5 bar variants at 8 bar
- 150 psi variants at 150 psi - 10 bar variants at 9.5 bar
- 200 psi variants at 193 psi - 13 bar variants at 12.5 bar
Compressor Dimensions
- 290 psi variants at 276 psi - 20 bar variants at 19 bar
type A B C

(2) Noise level:

mm inch mm inch mm inch
measured according to Pneurop / Cagi PN8NTC2.2 test code;
tolerance ±3 dB(A)
GA90 - 110 2779 109.4 1600 63.0 1990 78.3
GA132 - 160 2779 109.4 1886 74.3 1990 78.3
Integrated dryer: GA200 - 315 3386 133.3 2120 83.4 2400 94.4
pressure dewpoint of integrated refrigerant dryer at reference conditions: 37 to 39 °F GA315W-500W 4173 164.3 2120 83.4 2500 98.4
GA132 VSD 3386 133.3 1886 74.2 2010 79.1
Integrated filter: GA180 VSD 3386 133.3 1886 74.2 2010 79.1
particle removal down to 1 micron and maximum remaining oil aerosol GA315 VSD 4000 157.4 2120 83.4 2400 94.4
of 0.1 ppm GR110-200 2779 109.4 1886 74.3 1990 78.3
 What sets Atlas Copco apart? Our belief that, to
excel, we must provide the best possible know-how
and technology in ways that our customers value.
Whether we’re fully supporting existing products
or advancing technology through innovation, we
constantly focus on customer needs.

The Atlas Copco way of doing business grows

from ongoing interaction, long-term relationships
and a commitment to understanding each customer’s
process and objectives. As a result, every com-
pressed air solution we create helps a customer
operate with greater efficiency, economy and
productivity.

Satisfying customer needs effectively has

made Atlas Copco the number one compressor
manufacturer in the world. We will continue to
attract new business through our unwavering
conviction to creating products and ideas that Member:

help our customers succeed.

1310 9054 51 FAB 8/05 15M

Danger: Never use compressed air as breathing air without prior purification in accordance with
local legislation and standards. Atlas Copco assumes no responsibility or liability related to the
purchaser’s/user’s breathing air system.

The information contained herein is general in nature and is not intended for specific construction,
installation or application purposes.

Atlas Copco Compressors Inc.

94 North Elm Street, Floor 4
Westfield, MA 01085-1689
Tel. 413-536-0600 Fax. 413-536-0091
© 2005 by Atlas Copco Compressors Inc.
® Atlas Copco and Elektronikon are registered trademarks of Atlas Copco AB www.atlascopco.us