Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

5-40 W C-Band Buc: The New Generation of Mitecvsat Medium Power C-Band Bucs

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

datasheet

5-40 W c-Band
BUC

satellite communications

The new generation of MitecVSAT Key Features


medium power C-band BUCs • Best in class efficiency with a draw of less
Comes with a super-compact form factor, is light weight than 45W for 5W and less than 65W for 10W.
Can be powered by the modem; no expensive
and extremely efficient, which allows it to be mounted power supply required.
directly on the antenna feed. • Offered in 4 different sub-bands
• FSK Interface via IF connector
• Internal reference Option
• Full M&C Option including RS-232, RS-485,
Ethernet and SNMP
• Wide range of supply voltage 18 to 55 VDC for
5-10W and 36 to 55VDC for 20-40W BUC.
• Built In low voltage protection will shut down
the BUC when 20-40W is powered from 24VDC
• Status LED

your daily experience powered by mitecVSAT


SALES@MITECVSAT.COM | WWW.MITECVSAT.COM | 1-514-694-8666
5-40 W C-Band BUC
Transmit Characteristics
Output Frequency Range Band 1: 5.850-6.425 MHz; Band 2: 5.850-6.725 GHz;
Band 3: 5.725-6.425 GHz; Band 4: 6.725-7.025 GHz;
Input Frequency Range Band 1: 950-1525 MHz; Band 2: 950-1825 MHz; Band 3: 950-1675 MHz;
Band 4: 1275-1575 MHz;
Local Oscillator Frequency Bands 1 & 2 : 4.90 GHz; Band 3: 4.75 GHz; Bands 4: 5.45 GHz
Output VSWR 1.20:1
Linear Gain Refer to table “Specifications by BUC Power”
Gain Stability Over Temperature ± 1.5 dB nominal; ± 2.0 dB max.
Gain Variation at fixed temperature Over full band: Bands 1, 4 & 5: ± 2.0 dB; Band 2 : ± 2.50 dB;
Band 3: ± 2.25 dB Over 40 MHz: ± 0.5 dB for all bands
Intermodulation -25 dBc, with 2 equal carriers at 3 dB total power backoff from rated power
10 MHz Reference 0 dBm ±0.5 dB, (External via IF Connector or Internal)
Local Oscillator Phase Noise -65 dBc/Hz max @ 100 Hz; -75 dBc/Hz max @ 1 KHz;
-85 dBc/Hz max @ 10 KHz; -95 dBc/Hz max @ 100 KHz ; -110 dBc/Hz max @ 1 MHz
Output Spurious Bands 1, 3, 4, 5: -60 dBc; Band 2: -45 dBc
Receive Band Noise Power Density -150 dBm/Hz max.
Input Impedance 50 Ohms
Input VSWR 1:50:1
INTERFACE
RF Output Waveguide, CPR137G (Grooved)
IF Input N-Type Female, 50 Ohms
Power Supply Standard: DC Via Coaxial Connector; Optional: DC or AC via MS Connector
M&C Standard: FSK via Coaxial Connector; RS485/RS232/Ethernet optional via MS Connector
ENVIRONMENTAL
Temperature Range (ambient) -40°C to + 55°C (operating); -40°C to + 75°C (storage)
Humidity 0 to 100% (condensing)
Altitude 10,000 ft ASL
SPECIFICATIONS BY BUC POWER
BUC RF Power Gain Power PoweR Dimensions Weight
Power @ P1dB (dBm) min. (dB) Draw (W) Cooling BUC (Inches) (lbs/Kg)
5W +37 60 45 Convection +18 to +55 VDC (Coax Feed) 9.0 x 7.0 x 3.0 8.8/4
10W +40 63 65 Convection +18 to +55 VDC (Coax Feed) 9.0 x 7.0 x 3.0 8.8/4
+48 VDC (non-isolated) 9.0 x 7.0 x 3.0 8.8/4
+48 VDC (isolated), 110/220 VAC 9.0 x 7.0 x 4.75 12.5/5.7
20W +43 66 140 Fan +36 to +55 VDC (Coax Feed) 9.0 x 7.0 x 4.65 10/4.5
+48 VDC (non-isolated) 9.0 x 7.0 x 4.65 10/4.5
48 VDC (isolated), 110/220 VAC 9.0 x 7.0 x 6.4 13.7/6.2
40W +46 68 250 Fan +36 to +55 VDC (Coax Feed) 9.0 x 7.0 x 4.65 10/4.5
+48 VDC (non-isolated) 9.0 x 7.0 x 4.65 10/4.5
48 VDC (isolated), 110/220 VAC 9.0 x 7.0 x 6.4 13.7/6.2
* for a 30W unit consult factory

ORDERING INFORMATION
Ordering Number: ALTX - C - - OPTIONS
1. Band 1. 5.85 - 6.425 GHz
2. Internal 10 MHz 0(N) or 1(Y) 2. 5.85 - 6.725 GHz
3. M&C RS 232/485 Ethernet 0(N) or 1(Y) 3. 5.725 - 6.425 GHz
Power in WATTS 4. Other 4. 6.725 - 7.025 GHz

your daily experience powered by mitecVSAT


SALES@MITECVSAT.COM | WWW.MITECVSAT.COM | 1-514-694-8666
Rev. 4 02/13

You might also like