Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 197 views

    TDS PAC SERIES PAC-031 Bluwat

    Uploaded by

    Alfonso García
    This document provides information about PAC-031 Polyaluminium Chloride, a spray dried coagulant powder produced by Yixing Bluwat Chemicals Co. PAC-031 is a yellow powder made from calcium hydroxide and bauxite. It is used for water treatment applications to remove pollutants like heavy metals. The document lists its advantages over other coagulants as well as its typical properties and application instructions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TDS PAC SERIES PAC-031 Bluwat

    Uploaded by

    Alfonso García
    197 views2 pages
    This document provides information about PAC-031 Polyaluminium Chloride, a spray dried coagulant powder produced by Yixing Bluwat Chemicals Co. PAC-031 is a yellow powder made from calcium hydroxide and bauxite. It is used for water treatment applications to remove pollutants like heavy metals. The document lists its advantages over other coagulants as well as its typical properties and application instructions.

    Original Description:

    PAC Bluwat

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about PAC-031 Polyaluminium Chloride, a spray dried coagulant powder produced by Yixing Bluwat Chemicals Co. PAC-031 is a yellow powder made from calcium hydroxide and bauxite. It is used for water treatment applications to remove pollutants like heavy metals. The document lists its advantages over other coagulants as well as its typical properties and application instructions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    197 views2 pages

    TDS PAC SERIES PAC-031 Bluwat

    Uploaded by

    Alfonso García
    This document provides information about PAC-031 Polyaluminium Chloride, a spray dried coagulant powder produced by Yixing Bluwat Chemicals Co. PAC-031 is a yellow powder made from calcium hydroxide and bauxite. It is used for water treatment applications to remove pollutants like heavy metals. The document lists its advantages over other coagulants as well as its typical properties and application instructions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    宜兴市蓝波化学品有限公司

    YIXING BLUWAT CHEMICALS CO., LTD.


    Web: www.bluwat.com.cn Tel: +86 510 87821568
    E-Mail: lks@bluwat.com.cn Fax: +86 510 87821558
    ____________________________________________
    BLU PAC SERIES
    PAC-031 POLYALUMINIUM CHLORIDE

    CHEMICAL NAME: PAC-031 Spray drying type Polyaluminium Chloride

    DESCRIPTION: BLU PAC-031 type, it is Polyaluminium Chloride, spray drying type,


    yellow powder, used for water treatment, work as coagulant. It is
    made by Ca(OH) 2 and Bauxite.

    ADVANTAGES:  Can be used widely for industrial application.


     Easily soluble in water; dissolves rapidly.
     Cost is very low, very competitive than other general coagulants
     Dosage will be less(20-50%) than drum dried PAC
     Floc forming fast, good activity, good filtering.
     Don’t need adding alkaline additives, if deliquescence, its effect
    remain same.
     Adapted for a wide pH value, strong adaptability
     The Salt content in the effluent will be reduced after use PAC.
     Can remove the water pollution of heavy metals and radioactive
    substances.
     The active ingredient of high, convenient storage and
    transportation.

    APPLICATION FIELDS:  Coagulant for different industrial area


     Clarifying agent in waste water
     Sludge thickening agent

    APPLICATION:  Suggested to dilute to the concentration of 2%-20% solution


    before use.
     For solid PAC product, dilution is necessary before being dosed,
    water amount for dilution shall be determined based on the
    amount of the chemicals to be dosed and the quality of water to be
    treated.
     For Solid PAC products, the dosage is about 1-15g/mt, the dosage
    of liquid PAC is 3-40g/mt, the best dosage is based on different
    lab test results.

    1 TECHNICAL DATA SHEET


    TYPICAL PROPERITIES:
    Specifications: PAC-031 Spray drying type
    Appearance: Solid yellow powder
    Odor: Odorless
    Al2O3, % : ≥29
    Basicity ,%: 70.0~90.0
    Insoluble,% : 1.0 max
    Specific gravity(@ 25℃) 1.15-1.20
    pH(10% water solution): 3.5~5.0
    Pb %: <0.006
    As %: <0.001

    PACKAGE: Packed in inner plastics bags (white or yellow) and polypropylene


    woven bags, with each bag containing 25kgs.

    STORAGE: Should be stored in original containers in cool and dry place, away
    from sources of heat, flame and direct sunlight. Please refer Technical
    Data Sheet, Label and MSDS for more details and shelf life.

    2 TECHNICAL DATA SHEET

    You might also like