Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 46 views

    Si 6rp0a 001 Eng

    Uploaded by

    Bernardo Lizardi
    Shimano Bar End Service Manual

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Si 6rp0a 001 Eng

    Uploaded by

    Bernardo Lizardi
    46 views1 page
    Shimano Bar End Service Manual

    Original Title

    SI-6RP0A-001-ENG

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Shimano Bar End Service Manual

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    46 views1 page

    Si 6rp0a 001 Eng

    Uploaded by

    Bernardo Lizardi
    Shimano Bar End Service Manual

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    General Safety Information In order to realize the best performance, we 3. Install the lever to the body unit.

    recommend that the following combination be used.


    WARNING Series DURA-ACE
    Shifting lever SL-BS79
    – To avoid serious injuries:
    Rear derailleur RD-7900
    • Obtain and read the service instructions carefully
    prior to installing the parts. Loose, worn or damaged Front derailleur FD-7900
    parts may cause the bicycle to fall over and serious Outer casing SP41 sealed outer casing
    injury may occur as a result. We strongly recommend
    Inner cable 1.2 mm dia. (stainless steel) Set so that the
    only using genuine Shimano replacement parts. Tightening torque:
    • Read these Technical Service Instructions carefully, Bottom bracket guide SM-SP17 2.5 - 3 N·m {21 - 26 in. lbs.} projection faces
    and keep them in a safe place for later reference. downward.
    Sprockets 10 Right: Thickness
    (large)
    Lever grip Left: Thickness
    Note (small)
    • For smooth operation, use the specified outer casing Installation of the lever
    and bottom bracket cable guide.
    • Because the high cable resistance of a frame with When installing the components to carbon frame/handle 4. Install the outer casing stopper to the brazed-on boss.
    internal cable routing would impair the SIS function, bar surfaces, verify with the manufacturer of the carbon
    this type of frame should not be used. frame/parts for their recommendation on tightening torque Brazed-on boss (M5)
    • The sliding surfaces of the inner cable and outer in order to prevent over tightening that can cause damage
    casing should be greased before use. to the carbon material and/or under tightening that can Stopper fixing bolt
    • The shifting lever can be installed to handlebars with cause lack of fixing strength for the components.
    diameters of 19.0 – 22.0 mm. 3 mm Allen key
    • Operation of the levers related to gear shifting should The illustration shows an explanation of the case where
    be made only when the front chainwheel is turning. the shifting lever is installed to drop handlebars.
    • Parts are not guaranteed against natural wear or Install the front lever in the same way.
    deterioration resulting from normal use.
    • For any questions regarding methods of handling or
    maintenance, please contact the place of purchase. 1. Attach the body unit to the handlebar, and then use a 5 Outer casing stopper (SM-CS50)
    mm Allen key to turn the body fixing bolt
    counterclockwise to tighten it. Tightening torque:
    1.5 - 2 N·m {13 - 17 in. lbs.}

    Tightening torque:
    5 - 6 N·m {43 - 52 in. lbs.}

    Technical 5. With the outer casing placed along the handlebar, cover the outer casing with
    the outer casing guide, and then use tape or similar material to provisionally
    Service Instructions SI-6RP0A-001 attach it to the handlebar.

    Bar End
    SL-BS79 Shifting Lever Body fixing bolt Outer casing guide

    Body unit
    5 mm Allen key

    2. Install the lever boss to the body unit.

    One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003


    Tape
    Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222

    3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan

    Please note: specifications are subject to change for improvement without notice. (English)
    Lever boss 6. Wrap the handlebar with bar tape.
    © May 2008 by Shimano Inc. XBC SZK Printed in Japan.

    You might also like