Wheel Loader: Engine Buckets Weights

966K
Wheel
Loader
Engine Buckets
Engine
Model
Cat®
C9.3
ACERT™
Bucket
Capacities
2.5
m3-9.2
m3
3.25
yd3-12.0
yd3
Max.
Net
Power
(1,800
rpm)
–
ISO
9249
199
kW
267
hp
Weights
Max.
Net
Power
(1,800
rpm)
–
SAE
J1349
199
kW
267
hp
Operating
Weight
24
189
kg
53,311
lb
•
For
4.2
m3
(5.5
yd3)
general
purpose
buckets
with
bolt-on
cutting
edges.
966K Features
Performance Series Buckets

With standard Performance Series Buckets,
operators benefit from reduced dig times and
better material retention; ultimately translating
into significant productivity and fuel efficiency
improvements.
Load Sensing Hydraulics

Load sensing hydraulics produce flow and pressure
for the implement system upon demand and only
in amounts necessary to perform the needed work
functions, enhancing machine productivity and
fuel efficiency.
Operator Environment
The new four post ROPS cab provides enhanced
comfort, visibility, and productivity resulting in a
more efficient operator. New features include an
ergonomic electro-hydraulic (EH) joystick steering
system with force feedback (speed sensitive),
automatic climate control, viscous mounts to
reduce noise and vibration levels, post mounted
membrane switches, and a convex windshield
giving the operator a panoramic view.
Cat® C9.3 ACERT™ Engine

The innovative Cat C9.3 ACERT engine is
optimized for maximum fuel efficiency and
increased power density while meeting all Tier 4
Interim/Stage IIIB emission standards.
Powershift Transmission
The K Series™ transmissions incorporate a new
shifting strategy that delivers smoother shifts,
faster acceleration, and increased travel speed
when climbing a grade.
Fuel Effi ciency

The 966K wheel loader has been integrated as a The Cat® 966K was designed to improve operator
system; from the linkage and work tool carrying comfort, performance, and productivity, all while
the payload, to the engine, transmission and torque meeting Tier 4 Interim/Stage IIIB emission standards.
converter moving the machine, the system has
The Performance Series Buckets enhance visibility
been optimized to achieve the lowest cost per ton.
and decrease cycle times. The unmatched, revolutionary
Contents world-class cab creates a comfortable, effi cient, safe,
Reliability
..............................................................3
and productive operator environment. The innovative

Cat C9.3 ACERT™ engine is optimized for maximum fuel
Durability
..............................................................4
efficiency and increased power density while meeting

Productivity
..........................................................5
all Tier 4 Interim/Stage IIIB emission standards.

Versatility
..............................................................6
The reliability, durability, and versatility of the 966K

Operator
Environment
........................................8
result in a machine that is better built to meet your

Serviceability
.....................................................10
needs. All day. Every day.

Sustainability
.....................................................11
Customer
Support
.............................................11
Owning
Costs
.....................................................12
Operating
Costs
.................................................13
Wheel
Loader
Specifi
cations
.........................14
Standard
and
Optional
Equipment
.................25
Reliability
Tested
and
Proven.
Ready
to
Work.
Structures
The K Series™ features many of the components designed
and proven reliable over generations of product design.
Strata Precleaner
The system removes 93% of the dust particles before the
air has reached the primary engine air filter. As air enters
the precleaner, stationary vanes cause the incoming air to
spin. The resulting centrifugal force spins dust and dirt to
the outer walls where they are ejected out into the exhaust
stream, while the clean air flows down the center of the tube
and continues into the primary air filter. The primary benefi t
is extended fi lter life.
Cold Start/High Altitude Package

A new optional cold start package includes a fan pump
bypass, transmission pump bypass, additional battery
capacity, and an engine heater plug/cord. The bypass
systems reduce the parasitic load on the engine, while the
additional battery capacity increases the cold cranking
revolutions during startup. With the new optional cold start
package available on K Series, starting capability has been
dramatically improved in cold weather conditions. The system
also improves starting capability at high altitudes.
Monitoring Programs
Monitoring product health is key to maintaining reliability of
any equipment. Many programs offered by Caterpillar make
the tracking of the customer’s machine health quick and
easy. These programs include Product Link, VisionLink™,
and S·O·SSM Services.
Renowned Cat Dealer Support

From helping you choose the right machine to knowledgeable
support, Cat dealers provide the best when it comes to sales
and service. Manage costs with preventive maintenance
programs like Scheduled Oil Sampling (S·O·SSM) analysis
or elaborate Customer Support Agreements. Stay productive
with bestinclass parts availability. Cat dealers can even
help you with operator training to help boost your profi ts.
And when it’s time for machine rebuild, your Cat dealer can
help you save even more with Genuine Cat Reman parts.
Receive the same warranty and reliability as new products
at cost savings of 40 to 70 percent for power train and
hydraulic components.
3
Durability
Better
Built
to
Meet
Your
Needs
Frames
The robotically welded twopiece structural frame design
provides a rugged and reliable foundation for the machine
that improves stability, performance, and serviceability.
A robust articulating hitch system joins the front and rear
frames improving durability. Enhanced lines routings across
the hitch joint streamline the manufacturing process and
improve reliability and durability.
Engine
The new Cat C9.3 ACERT engine was designed to optimize
power density. It uses a combination of technologies to reduce
regulated emissions while ensuring high performance and
excellent fuel efficiency. An upgraded ADEM™ 4 electronic
control module manages the combustion process and a
new highpressure common rail fuel system allows precise
injection timing for a clean, efficient fuel burn. The rugged
Cat Clean Emissions Module is securely rubber mounted
on its own platform above the engine and contains a
Diesel Oxidation Catalyst, Diesel Particulate Filter and
Cat Regeneration System. Regeneration, the process by
which soot is removed from the Diesel Particulate Filter,
is completely automatic and does not interrupt the
machine’s work cycle.
Emissions
The 966K features a Cat C9.3 ACERT engine and a
Cat Clean Emissions Module to deliver the performance
and efficiency that customers demand, while meeting
Tier 4 Interim/Stage IIIB emission standards. The sixcylinder
electronic engine is turbocharged and aftercooled. ACERT™
Technology is a combination of building blocks that includes
electronics, fuel systems, air management systems and
aftertreatment components. The system is optimized based
on engine size, the type of application and the geographic
location in which it will work. The technologies are applied
systematically and strategically to meet high customer
expectations for productivity, fuel effi ciency, reliability
and service life.
Axles
The 966K axles are designed to handle extreme applications
resulting in reliable performance and extended life. The front
axle is rigidly mounted to the frame in order to withstand
internal torque loads and still maintain support for the wheel
loader. The rear axle can oscillate to ±13 degrees helping to
ensure all four wheels stay on the ground providing stability
even in the roughest terrain.
4
Productivity
Move
More.
All
Day.
Every
Day.
Z-bar Linkage
The proven Zbar linkage with Performance Series Buckets offer excellent penetration into the pile, high breakout forces, good
roll back angles, and faster dig times. The results are improved tire life, superior fuel efficiency, and exceptional production
capabilities; all helping to enable a sustainable solution for your business.
Load Sensing Hydraulics

Load sensing hydraulics produce flow and pressure for the implement system upon demand and only in amounts necessary to
perform the needed work functions, enhancing machine productivity and fuel efficiency. Implement controllability is improved
through simultaneous implement operation and repeatable fine modulation, enabling greater operator comfort through ease
of operation.
Ride Control
Ride control provides the operator with a smoother ride over rough terrain, enabling a more comfortable ride at higher speeds.
The benefit is reduced cycle times, higher productivity and better fuel efficiency while performing load and carry applications.
The system works by using an accumulator to dampen the linkage motion, acting as a shock absorber.
Torque Converter
The 966K torque converter is optimized to improve fuel efficiency and deliver more power to the ground.
Transmission
The K series transmissions incorporate a new shifting strategy that delivers smoother shifts, faster acceleration, and better
performance climbing a grade. When placing the transmission into forward gear, the machine will automatically start in
second gear. With the further enhancement of a torque based 2 to 1 downshift, the downshift will only occur based on machine
load. Owners and operators will fully benefit from utilizing the automatic 14 transmission mode, which results in lower fuel
consumption and optimal machine performance.
5
Versatility
Work
Tool
Options
to
Meet
Your
Needs
Work Tools for Many Job Site Requirements

An extensive range of work tools and bucket styles are
available for the 966K to customize the machine for your
operation. The list includes: Performance Series Buckets;
Specialty Buckets (Multipurpose, Side Dump, Waste Handling,
Woodchip); Pallet Forks, Log and Lumber Forks, Rakes
(with or without top clamps); and Plows (angle or Vstyle).
Each is available either with pin on or quick coupler interface.
Performance Series Buckets:

Load Easy, Fuel Efficient, Carry More
Performance Series Buckets utilize a systembased approach
to balance bucket shape with the machine’s linkage, weight,
lift and tilt capacities. Operators benefit from reduced dig
times and better material retention; ultimately translating
into significant productivity and fuel effi ciency improvements.
Lower Operating Costs

Performance Series Buckets feature a longer floor that easily
digs through the pile and provides excellent visibility for the
operators to see when the bucket is full. Less time digging
in the pile results in lower fuel consumption and improved
tire life. A unique spill guard protects the cab and linkage
components from material overfl ow.
Higher Productivity
Performance Series Buckets achieve higher fill factors –
ranging from 100% to 115% depending on the machine
application and material type. The buckets feature optimized
geometry with a bucket opening matched to the machine’s
linkage and incorporate a curved side profile to maximize
material retention. The optimized design results in unsurpassed
production capabilities.
Performance Series Bucket Styles

Performance Series Buckets are available for General Purpose,
Material Handling, Rock and Coal style buckets.
6
Fusion
Quick
Coupler
Improved Machine Performance

Fusion™ is the patented wheel loader coupler system
from Caterpillar. The Fusion Coupler System provides
performance virtually identical to pin on – with all the
flexibility of a quick coupler system. The Fusion Coupler
sits back, closein to the loader arms – minimizing offset
and increasing the machine’s performance.
No Loss of Performance
Imagine lifting a hundred pound box with your arms fully
extended. Now imagine lifting that same load close to your
body. That’s the genius of Fusion: designed to integrate
the work tool and the machine by pulling the coupler and
tool closer in to the loader. As a result, the center of gravity
is moved inward, towards the machine. This translates
to increased lifting ability when compared to machines
equipped with other coupler systems. Fusion™ eliminates
coupler offset...
Unsurpassed Durability
...with
An advanced wedging mechanism creates a tight, rattle
substantial
free fit. This patented lock up system eliminates play and
improvements in
wear – resulting in a long service life. Wedges pull the
center of gravity.
attachment tight to the machine in two directions – in and
down. Constant hydraulic pressure on the coupler wedges
compensate for wear, assuring a tight fit through the life of
the coupler. Tight fit gives better tool control and increased
productivity. Coupler durability is substantially increased
over traditional couplers.
Enhanced Visibility
An open coupler frame design clears sight lines from the
operator’s seat, making it easier than ever before to engage
and disengage attachments with certainty. Offset tines and
other design changes to Fusion Pallet Forks, working in
conjunction with the Fusion Coupler, enhance visibility
substantially at ground level and truck bed height when
compared to traditional coupler and fork combinations.
Common Interface Compatibility

The Fusion Coupler System gives Caterpillar customers one
common interface – eliminating the need for many different
couplers across the entire range of small and medium wheel
loaders. This expanded machine compatibility not only allows
one machine to use a range of work tools, but also allows one
work tool to be picked up by machines of many different sizes.
The Fusion coupler interface is designed to work on 924
through 972 machines. Each machine will have its own optimal
bucket and fork recommendations. However, crossmachine
compatibility gives you additional flexibility and fl eet options
not found with any other wheel loader coupler.
7
Operator Environment
Safe.
Comfortable.
Effi
cient.
Electro-Hydraulic (EH) Joystick Steering with

Force Feedback (Speed Sensitive)
The industry leading EH joystick steering system combines
operator comfort and precision control to provide a
sustainable work environment for the operator. The system
incorporates a force feedback motor that automatically adjusts
the effort needed to tilt the ergonomic joystick based on
ground speed, resulting in superior control in all applications
and climates. For customers who prefer a steering wheel, an
electrohydraulic steering wheel is available as an option.
Implement Controls (EH)

Seat mounted single axis implement control levers provide
the operator with precise control of the work tool, all
while moving with the seat for maximum comfort. In cab
programmable kickouts and automatic cylinder snubbing
maximize operator comfort and productivity throughout
their shift. Optional implement joysticks are available
for 2V and 3V hydraulics.
Seat
The Cat Optimized Seating System is 6way adjustable to
accommodate operators of all sizes. The seat has a one
piece high back that supports the lumbar area of the back
up through the shoulders. Both armrests are large and can
be adjusted up, down, fore, and aft to enhance comfort and
convenience. An optional feature for the cab seat is a heated
backrest and cushion.
Sound and Vibration

New viscous cab mounts connect the cab to the frame of
the machine, decreasing noise and vibration the operator
is subjected to. This contributes to a wellrested operator
who remains efficient and productive. All Day. Every Day.
Information Display
The central display panel has a large text box, fi ve analog
like gauges, and LED warning indicators. The large text box
provides inlanguage information about machine operation,
feature activation and system troubleshooting and calibration.
With the 5 large analogtype gauges the operator can easily
identify if key systems are within normal operating range.
A resettable trip totals function has been incorporated to
display information for average fuel consumed, total fuel
consumed, idle fuel, idle time, operating hours, odometer, etc.
The navigation buttons are located on the side of the screen
and help assist with set up and other various functions.
8
Automatic Climate Control and Air Quality
The new climate control system automatically adjusts the air
temperature and fan speed to maintain the operator’s preferred
climate setting. The cab air filtration system recirculates 90%
of the cab air and is now serviced from outside the cab,
enabling maximum air quality and cab cleanliness. The new
air conditioning sealing system keeps refrigerant contained
preventing system shutdown. Combined together, these systems
help the operator to remain efficient and productive all shift long.
Entry and Exit

Wellplaced grab bars and a ladder inclination angle of
10degrees forward makes the walk into the cab feel more like
a staircase than a ladder. The new wider front hinged door can
be opened and closed while seated, greatly improving ingress
and egress. Two new lefthand and righthand sliding windows
can also be opened and closed with one hand while seated for
comfortable communication to personnel on the ground.
Visibility
Visibility has been enhanced by removing the steering wheel,
adding a convex windshield, and eliminating two cab posts.
The cab has a clean and clear panoramic view for safe operation
of the machine. External rearview mirrors are mounted on the
cab to provide all around visibility. The external mirrors fold
horizontally to provide fast, safe access to clean the window
from the front platform. Optional heated and powered mirrors
are available to further improve visibility in cold climates.
Rearview Camera
With the new standard rearview camera, visibility is greatly
enhanced. The camera is located in a pocket on the grill to
protect it from damage and the elements. The camera can
be set to activate only when the transmission is in reverse to
help eliminate distractions in the cab, especially when in dark
environments. Two rear work lights are located in the rear
grill and can be activated to illuminate the area behind the
machine in low light conditions.
Control Panels and Park Brake Switch

Two control panels located on the front right ROPS post
consist of large membrane switches making them easy to
activate while wearing gloves. The membrane switches contain
LED’s to denote activation/mode and have a positive feel and
“click” to signal activation. The ISO symbols located on each
membrane switch are molded all the way through to ensure
the image will not wear off over time. A new “help” feature
explains the function of each membrane switch. A two position
rocker switch activates the electrohydraulic park brake and
is automatically applied upon machine shutdown.
9
Serviceability
Easy
to
Maintain.
Easy
to
Service.
Electrical Service Center

The electrical service center provides grouped ground level
access to numerous electrical features, enhancing safety
and convenience for operators and service technicians. It
is conveniently located beneath the left platform for access
before entering the cab and contains the maintenance free
batteries, a fuse relay panel, main disconnect switch, ground
level engine shutdown switch, hood tilt switch, and the jump
start receptacle.
Engine Access
The K Series retains the Cat sloped “onepiece” tilting
hood, which has become one of our brand’s hallmarks and
provides industryleading access to the engine, Cat Clean
Emissions Module (CEM) and other components but with
fresh new styling clearly distinct from the H Series. New to
the loaders is a rear clamshell hood design that allows quick
access to the engine oil dipstick and fill, fuel fill port, and
cooler cores.
Cooling System
The cooling system is readily accessible for clean out
and maintenance. With six cooling fins per inch and a
perforated grill, most airborne debris entering the system
passes through the cooler cores. The cooler cores swing out
providing easy access for cleaning; an option variable pitch
fan is available to automatically purge the cooler cores by
periodically reversing the airfl ow.
Hydraulic Service Center

The hydraulic components are all conveniently located
behind the hinged right side access ladder at a single ground
level service center improving safety and reducing service
time. Accessible from the service center are the transmission
and hydraulic oil filters, brake accumulators, pressure test
ports, etc.
10
Sustainability
Conserving
Resources
The 966K is designed to compliment your business plan,

reduce emissions and minimize the consumption of
natural resources.
• Improved fuel efficiency – less fuel consumed results
in lower emissions.
• Machine is built with a 96% recyclability rate
(ISO 16714) to conserve valuable natural resources
and further enhance machine endoflife value.
• Engine air filter life doubled to reduce cost and waste.
• Improved operator efficiency through enhanced visibility
and reduced noise/vibration levels.
• Product Link family of products and solutions that
collect, communicate, store and deliver product and
jobsite information to maximize productivity and
reduce costs.
• Major components are rebuildable, eliminating waste
and saving money by giving the machine and/or major
components a second – and even third – life.
Customer Support
Ready
to
Help.
Anytime.
Anywhere.
Machine Selection
Cat dealers are ready to help evaluate machine options;
from new or used machine sales, to rental or rebuild
options, Cat dealers can provide an optimal solution
to meet customer business needs.
Product Support
Cat dealers are with customers every step of the way
to maximize machine uptime by providing unsurpassed
worldwide parts support, trained technicians and
customer support agreements.
Operation
To help maximize the return on your investment,
Cat dealers offer various training resources to improve
operating techniques.
Financing
Cat dealers offer financing options to meet a variety
of customer needs.
11
Owning Costs
Proven
Best
Investment
Customer Support Agreements

A Customer Support Agreement (CSA) is an arrangement
between you and your Cat dealer that helps you lower
your total cost per ton. CSAs are flexible, allowing them
to be tailored to your business needs. They can range from
simple Preventive Maintenance Kits to elaborate Total Cost
Performance Guarantees. Having a CSA with your Cat dealer
enables more time for you to do what you do best – run
your business.
Monitoring Systems
Monitoring product health is key to optimizing the life
of an investment into a Cat Wheel Loader.
• Cat Product Link – Cat Product Link allows remote
monitoring of equipment to improve overall fl eet
management effectiveness. Product Link is deeply
integrated into machine systems. Events and diagnostic
codes, as well as hours, fuel, idle time and other detailed
information are transmitted to a secure web based
application, VisionLink™. VisionLink includes powerful
tools to convey information to users and dealers, including
mapping, working and idle time, fuel level and more.
• S·O·SSM Services – Helps manage component life and
decrease machine downtime, increasing productivity and
efficiency. Regular fluid sampling can help track what
is going on inside your machine. Wear related problems
are predictable and easily repairable. Maintenance can
be done to accommodate your schedule, resulting in
increased uptime and flexibility in maintenance repairs
before failure.
Parts Availability
Caterpillar provides an unsurpassed level of personalized
service to help you work more cost effective and effi cient.
By utilizing a worldwide parts network Cat dealers help
minimize machine downtime and save money by delivering
replacement parts within 24 hours.
Resale Value
Owning quality equipment is an important factor in
maintaining resale value. Caterpillar is not only known for
machines that are better built, but provides product and
dealer support to maintain the reliability and durability
of your machine.
12
Operating Costs
Save
Time
and
Money
by
Working
Smart
Data from customer machines show Cat wheel loaders are among the most fuel efficient machines in the industry.
Several features contribute to this excellent fuel effi ciency:
• Performance Series Buckets – Deliver faster fill times and better material retention, ultimately reducing cycle times while
improving productivity and fuel effi ciency.
• Load-Sensing Hydraulics – Provides only the hydraulic flow required by the implement and steering systems for improved
fuel efficiency and greater rimpull.
• ACERT™ Engine – Power dense engine enables a more fuelefficient method to meet emissions regulations.
• Fuel Management System (FMS) – Optimizes power for maximum fuel savings with minimal impact on production.
• Engine Idle Shutdown – Automatic engine and electrical system shutdown conserves fuel.
• Torque Converter – Transfers more power to the ground and optimizes fuel efficiency in all applications.
• Shift Strategy – Reduced torque interruption increases driveline efficiency, conserving fuel. Auto 14 transmission mode
keeps engine rpm low, reducing fuel consumption while delivering optimal machine performance.
Machine configuration, operator technique, and job site layout can impact fuel consumption by as much as 30 percent.
• Machine Confi guration – Select the correct work tool and tire type based on machine application. Radial tires are preferred;
ensure proper inflation pressures. Heavier tires burn more fuel. Keep engine rpm low by using auto 14 transmission mode.
• Job Site Layout – Spot loading targets in the right position. Avoid traveling more than twice the machine length during
short cycle loading. Reduce transport distance for load and carry cycles by optimizing job site layout.
• Loading Bucket – Load in first gear and keep engine rpm low. Raise and tilt bucket smoothly and do not use a “pumping”
motion. Avoid lift lever detent and use of transmission neutralizer.
• Loading Truck or Hopper – Do not raise the work tool any higher than necessary. Keep engine rpm low and unload in
controlled manner.
• Idle – Set the parking brake to engage Engine Idle Management System.
13
966K Wheel Loader Specifi cations
Engine Operating Specifications Hydraulic System

Engine Model Cat ® C9.3 ACERT™ Static Tipping Load 14 636 kg 32,259 lb Steering System Piston
Max. Gross Power 222 kW 296 hp Full 37° Turn – Pump Type
(1,800 rpm) – ISO 143971* Implement System – 340 L/min 90 gal/min
SAE J1995 Static Tipping Load 15 828 kg 34,886 lb Maximum Pump
Max. Net Power 199 kW 267 hp Full 37° Turn – Output (2,275 rpm)
(1,800 rpm) – Rigid Tires** Implement System – 31 000 kPa 4,496 psi
ISO 9249 Breakout Force 173 kN 38,984 lb Maximum Operating
Max. Net Power 199 kW 267 hp 3 3
• For 4.2 m (5.5 yd ) general purpose Pressure
(1,800 rpm) – buckets with BOCE. Implement System – 300 L/min 79.3 gal/
SAE J1349 * Full compliance to ISO (2007) 143971 Optional 3rd Function min
Max. Net Power 199 kW 267 hp Sections 1 thru 6, which requires 2% Maximum Flow
(1,800 rpm) – verification between calculations and Implement System – 20 700 kPa 3,000 psi
EEC 80/1269 testing. Optional 3rd Function
Peak Gross Torque 1364 N·m 1,006 ftlb ** Compliance to ISO (2007) 143971 Maximum Pressure
(1,400 rpm) – Sections 1 thru 5. Hydraulic Cycle 5.9 Seconds
SAE J1995 Time – Raise from
Peak Net Torque 1274 N·m 940 ftlb
Transmission Carry Position
(1,400 rpm) – Forward 1 6.7 km/h 4.2 mph Hydraulic Cycle 1.5 Seconds
SAE J1349 Time – Dump, at
Forward 2 12.6 km/h 7.8 mph
Bore 115 mm 4.5 in Maximum Raise
Forward 3 22.4 km/h 13.9 mph
Stroke 149 mm 5.9 in Hydraulic Cycle 2.4 Seconds
Forward 4 37.4 km/h 23.2 mph Time – Lower,
Displacement 9.3 L 568 in3
Reverse 1 7.8 km/h 4.9 mph Empty, Float Down
• Caterpillar engine with ACERT Technology – Reverse 2 13.7 km/h 8.5 mph Hydraulic Cycle
meets Tier 4 Interim/Stage IIIB emission Time – Total 9.8 Seconds
Reverse 3 23.5 km/h 14.6 mph
standards.
Reverse 4 38.5 km/h 23.9 mph • Cycle time with rated payload.
Weights • Maximum travel speed in standard vehicle
with empty bucket and standard L3 tires Brakes
Operating Weight 24 189 kg 53,311 lb with 826 mm (33 in) roll radius. Brakes Meet OSHA,
• For 4.2 m3 (5.5 yd3) general purpose buckets SAE J1473 OCT90
with BOCE. and ISO 34501985
required standards
Buckets
Bucket Capacities 2.50 m3 3.25 yd3
9.20 m3 12.00 yd3
• Refer to bucket selection chart.
14
Axles Cab Service Refill Capacities
Front Fixed ROPS/FOPS Meets SAE and Fuel Tank – 381 L 101 gal
Rear Oscillating ISO standards Standard
±13 degrees • Cat cab with a four post integrated Rollover Cooling System 65 L 17.2 gal
Maximum Single 495 mm 19.5 in Protective Structure (ROPS) are standard in Crankcase 24.5 L 6.5 gal
Wheel Rise and Fall North America and Europe. Transmission 50 L 13.2 gal
• ROPS meets SAE J1040 APR88 and
Differentials and 64 L 16.9 gal
Tires ISO 3471:1994 criteria.
• Falling Objects Protective Structure (FOPS) Final Drives – Front
• Choose from a variety of tires to match meets SAE J231 JAN81 and ISO:1992 Differentials and 64 L 16.9 gal
your application. Level II criteria. Final Drives – Rear
• Choices include: Hydraulic Tank 198 L 52.3 gal
26.5R25 VLT BS E3 Radial Sound
26.5R25 VJT BS E3/L3 Radial
26.5R25 VMT BS L3 Radial • The sound values indicated below are
26.525 SRG LD FS L3 Bias for specific operating conditions only.
750/65R25 XLD L3T MX L3 Radial Machine and operator sound levels will
26.5R25 XHA2 MX L3 Radial vary at different engine and/or cooling fan
26.5R25 XLD D1 MX L4 Radial speeds. Hearing protection may be needed
26.5R25 VSNT BS E4/L4 Radial when the machine is operated with a cabin
26.525 SDT LD FS L5 Bias that is not properly maintained, or when
26.5R25 VSDL BS L5 Radial the doors and/or windows are open for
26.5R25 XLDD2 MX L5 Radial extended periods or in a noisy environment.
26.5R25 X MINE D2 MX L5 Radial • The operator sound pressure level for a
Cat Flexport™ standard machine confi guration, measured
• NOTE: In certain applications (such as according to the procedures specifi ed in
load and carry), the loader’s productive ISO 6396:2008, is 71 dB(A) with the
capabilities might exceed the tires’ tonnes cooling fan speed set at maximum value.
km/h (tonmph) capabilities. Caterpillar • The machine sound power level for a
recommends that you consult a tire supplier standard machine confi guration, measured
to evaluate all conditions before selecting a according to the procedures specifi ed in
tire model. Other special tires are available ISO 6395:2008, is 111 dB(A) with the
on request. cooling fan speed set at maximum value.
• The machine sound pressure level for
a standard machine confi guration,
measured according to the procedures
specified in SAE J88:2006, is 76 dB(A).
The measurement was conducted under
the following conditions: distance of 15 m
(49.2 ft), moving forward in an intermediate
gear ratio, static hydraulic cycle (with no
payload) and with the cooling fan speed
set at maximum value.
• The operator sound pressure level for
a machine installed with a Low Sound
package, measured according to the
procedures specified in ISO 6396:2008,
is 69 dB(A) with the cooling fan speed
• The machine sound power level for a
machine installed with a Low Sound
package, measured according to the
procedures specified in ISO 6396:2008,
is 108 dB(A) with the cooling fan speed
15
Dimensions
All dimensions are approximate and based on L3 Michelin XHA2 tires.
10
15
11
5
1 2
3 12
13
14 9 4 8
6 7
1 Height to Top of ROPS 3547 mm 11'7"

2 Height to Top of Exhaust Pipe 3518 mm 11'6"
3 Height to Top of Hood 2828 mm 9'3"
4 Ground Clearance With 26.5R25 (See Tire Option Chart for Other Tires) 475 mm 1'6"
5 BPin Height – Standard 4234 mm 13'10"
BPin Height – HighLift 4792 mm 15'8"
6 Center Line of Rear Axle to Edge of Counterweight 2187 mm 7'2"
7 Wheelbase 3450 mm 11'3"
8 BPin Height @ Carry – Standard 640 mm 2'1"
9 Center Line of Rear Axle to Hitch 1725 mm 5'7"
10 Rack Back @ Maximum Lift 62 degrees
11 Dump Angle @ Maximum Lift 49 degrees
12 Rack Back @ Carry 50 degrees
13 Rack Back @ Ground 42 degrees
14 Height to Center Line of Axle 798 mm 2'7"
15 Lift Arm Clearance 2862 mm 9'3"
Lift Arm Clearance @ High Lift 4153 mm 13'6"
16
Operating Specifications
Bucket Type General Purpose – Pin On

Bolt-On Teeth and Bolt-On Teeth and
Edge Type Edges Segments Teeth Edges Segments Teeth
Capacity – Rated (§) m 3
3.80 3.80 3.60 4.00 4.00 3.80
yd3 4.97 4.97 4.71 5.23 5.23 4.97
Capacity – Struck (§) m3 3.24 3.24 3.09 3.50 3.50 3.34
yd3 4.24 4.24 4.04 4.58 4.58 4.37
Width (§) mm 3220 3271 3271 3220 3271 3271
ft/in 10'6" 10'8" 10'8" 10'6" 10'8" 10'8"
Dump Clearance at Maximum Lift and 45° Discharge (§) mm 3067 2915 2915 3058 2905 2905
ft/in 10'0" 9'6" 9'6" 10'0" 9'6" 9'6"
Reach at Maximum Lift and 45° Discharge (§) mm 1327 1467 1467 1334 1473 1473
ft/in 4'4" 4'9" 4'9" 4'4" 4'10" 4'10"
Reach at Level Lift Arm and Bucket Level (§) mm 2739 2943 2943 2750 2955 2955
ft/in 8'11" 9'7" 9'7" 9'0" 9'8" 9'8"
Digging Depth (§) mm 124 124 94 124 124 94
in 4.9" 4.9" 3.7" 4.9" 4.9" 3.7"
Overall Length mm 8592 8817 8817 8604 8829 8829
ft/in 28'3" 29'0" 29'0" 28'3" 29'0" 29'0"
Overall Height with Bucket at Maximum Lift mm 5788 5788 5788 5902 5902 5902
ft/in 19'0" 19'0" 19'0" 19'5" 19'5" 19'5"
Loader Clearance Circle with Bucket at Carry Position (§) mm 14 727 14 899 14 899 14 733 14 905 14 905
ft/in 48'4" 48'11" 48'11" 48'5" 48'11" 48'11"
Static Tipping Load, Straight (ISO)* kg 16 852 16 671 16 870 16 833 16 652 16 885
lb 37,142 36,743 37,182 37,101 36,701 37,215
Static Tipping Load, Straight (Rigid Tire)* kg 18 071 17 886 18 074 18 062 17 877 18 113
lb 39,829 39,422 39,835 39,809 39,401 39,922
Static Tipping Load, Articulated (ISO)* kg 14 843 14 661 14 851 14 821 14 638 14 856
lb 32,715 32,312 32,733 32,666 32,262 32,743
Static Tipping Load, Articulated (Rigid Tire)* kg 16 034 15 849 16 028 16 021 15 836 16 056
lb 35,339 34,932 35,326 35,311 34,903 35,388
Breakout Force** (§) kN 187 185 199 185 183 197
lb 42,151 41,781 44,901 41,695 41,326 44,390
Operating Weight* kg 24 081 24 218 24 055 24 133 24 270 24 107
lb 53,073 53,377 53,017 53,188 53,492 53,132
* Static tipping loads and operating weights shown are based on a machine configuration with Michelin 26.5R25 XHA2 L3 Radial tires, full
fluids, operator, standard counterweight, cold start, roading fenders, Product Link, open differential axles (front/rear), power train guard,
secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 26.5R25 XLDD2 L5 Radial tires.
(§) Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including SAE
Standard J732C governing loader ratings.
(ISO) Full compliance to ISO 143971 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 143971 (2007) Sections 1 thru 5.
17
Bucket Type General Purpose – Pin On

4.20 4.20 4.00 4.60 4.60 4.40
yd3 5.49 5.49 5.23 6.02 6.02 5.75
yd3 4.97 4.97 4.71 5.30 5.30 5.10
Width (§) mm 3220 3271 3271 3220 3271 3271
ft/in 10'6" 10'8" 10'8" 10'6" 10'8" 10'8"
ft/in 9'9" 9'3" 9'3" 9'9" 9'3" 9'3"
ft/in 4'6" 5'0" 5'0" 4'7" 5'0" 5'0"
ft/in 9'3" 9'11" 9'11" 9'4" 10'0" 10'0"
Digging Depth (§) mm 124 124 94 124 124 94
in 4.9" 4.9" 3.7" 4.9" 4.9" 3.7"
ft/in 28'7" 29'4" 29'4" 28'7" 29'4" 29'4"
ft/in 19'5" 19'5" 19'5" 19'4" 19'4" 19'4"
ft/in 48'6" 49'1" 49'1" 48'7" 49'1" 49'1"
lb 36,664 36,262 36,792 36,655 36,249 37,010
lb 39,353 38,943 39,480 39,397 38,983 39,777
lb 32,259 31,853 32,349 32,227 31,817 32,556
lb 34,886 34,476 34,977 34,906 34,492 35,257
lb 38,984 38,618 41,343 38,277 37,912 40,561
lb 53,311 53,615 53,255 53,399 53,703 53,343
18
Bucket Type General Purpose – Fusion QC

3.80 3.80 3.60 4.20 4.20 4.00
yd3 4.97 4.97 4.71 5.49 5.49 5.23
yd3 4.24 4.24 4.04 4.97 4.97 4.71
Width (§) mm 3220 3271 3271 3220 3271 3271
ft/in 10'6" 10'8" 10'8" 10'6" 10'8" 10'8"
ft/in 9'11" 9'5" 9'5" 9'8" 9'2" 9'2"
ft/in 4'5" 4'11" 4'11" 4'8" 5'1" 5'1"
ft/in 9'1" 9'9" 9'9" 9'5" 10'1" 10'1"
Digging Depth (§) mm 124 124 94 116 116 86
in 4.9" 4.9" 3.7" 4.5" 4.5" 3.4"
ft/in 28'5" 29'1" 29'1" 28'9" 29'5" 29'5"
ft/in 19'1" 19'1" 19'1" 19'7" 19'7" 19'7"
ft/in 48'5" 49'0" 49'0" 48'7" 49'2" 49'2"
lb 35,880 35,483 36,233 35,297 34,898 35,634
lb 38,506 38,101 38,885 37,918 37,512 38,280
lb 31,501 31,100 31,821 30,961 30,558 31,266
lb 34,074 33,670 34,418 33,531 33,125 33,860
lb 40,632 40,264 43,192 37,382 37,023 39,561
lb 53,992 54,296 53,936 54,132 54,436 54,076
19
Bucket Type General Purpose – Fusion QC Material Handling – Pin On

4.60 4.60 4.40 4.20 4.20 4.00
yd3 6.02 6.02 5.75 5.49 5.49 5.23
yd3 5.30 5.30 5.10 4.71 4.71 4.51
Width (§) mm 3220 3271 3271 3220 3271 3271
ft/in 10'6" 10'8" 10'8" 10'6" 10'8" 10'8"
ft/in 9'8" 9'1" 9'1" 9'8" 9'2" 9'2"
ft/in 4'8" 5'1" 5'1" 4'1" 4'6" 4'6"
ft/in 9'6" 10'2" 10'2" 9'1" 9'9" 9'9"
Digging Depth (§) mm 123 123 93 124 124 94
in 4.8" 4.8" 3.6" 4.9" 4.9" 3.7"
ft/in 28'9" 29'6" 29'6" 28'5" 29'1" 29'1"
ft/in 19'10" 19'10" 19'10" 19'4" 19'4" 19'4"
ft/in 48'7" 49'2" 49'2" 48'5" 49'0" 49'0"
lb 35,553 35,148 35,875 36,582 36,185 36,968
lb 38,271 37,857 38,622 39,219 38,814 39,634
lb 31,156 30,747 31,448 32,205 31,804 32,557
lb 33,819 33,405 34,138 34,784 34,379 35,164
lb 37,007 36,644 39,144 40,629 40,261 43,189
lb 54,383 54,687 54,328 53,210 53,514 53,154
20
Coal – Coal –
Bucket Type Rock – Pin On*** Pin On Fusion QC
High Lift
Bolt-On Teeth and Bolt-On Bolt-On Change
Edge Type Edges Segments Teeth Edges Edges in Specs
3.40 3.40 3.20 7.10 7.10
yd3 4.45 4.45 4.19 9.29 9.29
Capacity – Struck (§) m3 2.90 2.90 2.70 6.20 6.20
yd3 3.79 3.79 3.53 8.11 8.11
Width (§) mm 3252 3252 3252 3447 3447
ft/in 10'8" 10'8" 10'8" 11'3" 11'3"
ft/in 10'2" 9'11" 9'11" 8'7" 8'6" 1'9"
Reach at Maximum Lift and 45° Discharge (§) mm 1454 1576 1576 1583 1630
ft/in 4'9" 5'2" 5'2" 5'2" 5'4"
ft/in 9'2" 9'9" 9'9" 10'8" 10'10" 1'3"
Digging Depth (§) mm 68 68 25 140 126 –25
in 2.7" 2.7" 0.9" 5.5" 4.9" –1"
ft/in 28'5" 29'0" 29'0" 29'11" 30'1" 2'7"
ft/in 19'3" 19'3" 19'3" 19'11" 20'9" 1'10"
Loader Clearance Circle with Bucket at Carry Position (§) mm 14 813 14 901 14 901 15 214 15 232 481
ft/in 48'8" 48'11" 48'11" 49'11" 50'0" 1'7"
Static Tipping Load, Straight (ISO)* kg 17 057 16 988 17 358 15 930 15 134 170
lb 37,594 37,441 38,257 35,111 33,357 376
Static Tipping Load, Straight (Rigid Tire)* kg 18 293 18 222 18 604 17 192 16 375 115
lb 40,318 40,162 41,003 37,891 36,091 254
Static Tipping Load, Articulated (ISO)* kg 15 004 14 934 15 298 13 955 13 180 –11
lb 33,068 32,914 33,717 30,757 29,048 –26
Static Tipping Load, Articulated (Rigid Tire)* kg 16 213 16 142 16 515 15 189 14 399 –54
lb 35,734 35,578 36,400 33,478 31,736 –120
Breakout Force** (§) kN 186 185 193 129 124 –14
lb 41,828 41,704 43,564 29,095 27,969 –3,167
Operating Weight* kg 25 011 25 063 24 832 24 496 25 130 1726
lb 55,125 55,239 54,730 53,989 55,387 3,803
21
Bucket Selection Chart
Material Density kg/m3

700
800 900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
3.80
m3
(4.97
yd3)
4.37
m3
(5.72
yd3)
3.80
m3
(4.97
yd3)
4.00
m3
(5.23
yd3)
4.60
m3
(6.02
yd3)
4.00
m3
(5.23
yd3)
General
Purpose
4.20
m3
(5.49
yd3)
4.83
m3
(6.32
yd3)
4.20
m3
(5.49
yd3)
Pin On
4.60
m3
(6.02
yd3)
5.29
m3
(6.92
yd3)
4.60
m3
(6.02
yd3)
Material
4.20
m3
(5.49
yd3)
4.83
m3
(6.32
yd3)
4.20
m3
(5.49
yd3)
Handling
Standard Linkage
Rock 3.40
m3
(4.45
yd3)
3.91
m3
(5.11
yd3)
3.40
m3
(4.45
yd3)
Coal 7.10
m3
(9.29
yd3)
8.17
m3
(10.69
yd3)
7.10
m3
(9.29
yd3)
3.80
m3
(4.97
yd3)
4.37
m3
(5.72
yd3)
3.80
m3
(4.97
yd3)
General
4.20
m3
(5.49
yd3)
4.83
m3
(6.32
yd3)
4.20
m3
(5.49
yd3)
Fusion QC
Purpose
4.60
m3
(6.02
yd3)
5.29
m3
(6.92
yd3)
4.60
m3
(6.02
yd3)
Coal 7.10
m3
(9.29
yd3)
8.17
m3
(10.69
yd3)
7.10
m3
(9.29
yd3)
Material Density lb/yd3 1,180 1,348

1,517
1,685
1,854
2,022
2,191
2,359
2,528
2,696
2,865
3,033
3,202
3,370
3,539
3,707
3,876
4,044
4,213
Bucket
Density
115%
110%
105%
100%
95%
All
buckets
are
showing
Bolt-On
Edges.
Material
Handling
buckets
are
flat
floor
buckets.
22
Bucket Selection Chart
Material Density kg/m3

700
800 900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
3.80
m3
(4.97
yd3)
4.37
m3
(5.72
yd3)
3.80
m3
(4.97
yd3)
4.00
m3
(5.23
yd3)
4.60
m3
(6.02
yd3)
4.00
m3
(5.23
yd3)
General
Purpose
4.20
m3
(5.49
yd3)
4.83
m3
(6.32
yd3)
4.20
m3
(5.49
yd3)
Pin On
4.60
m3
(6.02
yd3)
5.29
m3
(6.92
yd3)
4.60
m3
(6.02
yd3)
Material
4.20
m3
(5.49
yd3)
4.83
m3
(6.32
yd3)
4.20
m3
(5.49
yd3)
Handling
High Lift Linkage
Rock 3.40
m3
(4.45
yd3)
3.91
m3
(5.11
yd3)
3.40
m3
(4.45
yd3)
Coal 7.10
m3
(9.29
yd3)
8.17
m3
(10.69
yd3)
7.10
m3
(9.29
yd3)
3.80
m3
(4.97
yd3)
4.37
m3
(5.72
yd3)
3.80
m3
(4.97
yd3)
General
4.20
m3
(5.49
yd3)
4.83
m3
(6.32
yd3)
4.20
m3
(5.49
yd3)
Fusion QC
Purpose
4.60
m3
(6.02
yd3)
5.29
m3
(6.92
yd3)
4.60
m3
(6.02
yd3)
Coal 7.10
m3
(9.29
yd3)
8.17
m3
(10.69
yd3)
7.10
m3
(9.29
yd3)
Material Density lb/yd3 1,180 1,348

1,517
1,685
1,854
2,022
2,191
2,359
2,528
2,696
2,865
3,033
3,202
3,370
3,539
3,707
3,876
4,044
4,213
Bucket
Density
115%
110%
105%
100%
95%
All
buckets
are
showing
Bolt-On
Edges.
Material
Handling
buckets
are
flat
floor
buckets.
23
Bucket Fill Factors

(as a % of ISO Rated Capacity)
Loose Material Performance Series Bucket

Earth/Clay 115
Sand and Gravel 115
Aggregate: 2576 mm (1 to 3 in) 110
19 mm (0.75 in) and smaller 105
Rock 100
24
966K Standard Equipment
Standard
equipment
may
vary.
Consult
your
Cat
dealer
for
details.
POWER TRAIN OPERATOR ENVIRONMENT TIRES

Brakes, full hydraulic enclosed wetdisc Air conditioner, heater, and defroster A tire must be selected from the mandatory
with Integrated Braking System (IBS) (auto temp and fan) attachments section. Base machine price
Brake wear indicators Beverage holders (2) with storage includes an allowance.
Diesel Particulate Filter (DPF) compartment for cell phone/MP3 player
Engine, Cat 9.3 that meets Tier 4 Interim/ Bucket/Work Tool function lockout FLUIDS
Stage IIIB emission standards Cab, pressurized and sound suppressed, Premixed 50% concentration of Extended
Fan, radiator, electronically controlled, (ROPS/FOPS) radio ready (entertainment) Life Coolant with freeze protection to
hydraulically driven, temperature sensing, includes antenna, speakers and converter –34° C (–29° F)
on demand (12volt 10amp)
Fuel Management System (FMS) Camera, rearview OTHER STANDARD EQUIPMENT
Fuel priming pump (electric) Coat hook (2) Auto idle shutdown
Fuel/water separator EH controls, lift and tilt function Couplings, Cat Oring face seal
Guard, vandalism EH parking brake Ecology drains for engine, transmission,
Precleaner, engine air intake Computerized monitoring system axles, and hydraulics
Radiator, unit core (6 fpi) with ATAAC Instrumentation, gauges: Ether aid
Switch, transmission neutralizer lockout – Digital gear range indicator Fenders, steel front with mudfl ap/rear
Torque converter, free wheel stator – DPF soot loading percent with extension
Transmission, automatic planetary – Engine coolant temperature Filters:
power shift (4F/4R) – Fuel level – Fuel, primary/secondary
Variable Shift Control (VSC) – Hydraulic oil temperature – Engine air, primary/secondary
– Speedometer/tachometer – Engine oil
ELECTRICAL – Transmission oil temperature – Hydraulic oil
Alarm, backup Instrumentation, warning indicators: – Transmission
Alternator, 150amp brushless – Axle oil temperature Fuel cooler
Batteries, (2) maintenance free 1,400 CCA – Battery voltage hi/low Grease zerks
Ignition key; start/stop switch – Engine air fi lter restriction Grill, airborne debris
Lighting system: – Engine intake manifold temperature Hitch, drawbar with pin
– Four halogen work lights – Engine oil pressure Hood, nonmetallic power tilting
– Two halogen roading lights – Fuel level and pressure hi/low with rear clamshell
(with signals) – Hydraulic oil fi lter restriction Hoses, Cat XT
– Two halogen rear vision lights – Hydraulic oil low Hydraulic oil cooler (swing out)
(hood mounted) – Parking brake Hydraulic system, load sensing
Main disconnect switch – Primary steering oil pressure Kickout, lift and tilt, automatic
Receptacle start (cables not included) – Service brake oil pressure (adjustable in cab)
Starter, electric, heavy duty – Transmission fi lter bypass Linkage, Zbar, cast crosstube/tilt lever
Starting and charging system (24volt) Horn, electric Oil sampling valves
Light, two dome (cab) Platform, window washing
Mirrors, rearview external Product Link
(includes spot mirrors) Remote diagnostic pressure taps
Post mounted membrane switch keypads Ride control, 2V
Receptacle, 12volt Service center (electrical and hydraulic)
Seat, Cat Comfort (cloth) air suspension Sight gauges: engine coolant, hydraulic oil,
Seat belt, retractable, 51 mm (2") wide and transmission oil level
Steering, EH joystick, speed sensing Steering, load sensing
with force feedback Toolbox
Sun visor, front Vandalism protection caplocks
Wetarm wipers/washers front and rear
– Intermittent front wiper
Window, sliding (left and right sides)
Viscous mounts
25
966K Optional Equipment
Optional
equipment
may
vary.
Consult
your
Cat
dealer
for
details.
Power Train Quick coupler Seat belt, 76 mm (3") wide

– Differentials Quick coupler ready, 2V Sun visor, rear
– Open, front or rear Quick coupler ready, 3V Security system, machine
– Limited slip, front Bucket and work tool options Cooling, high ambient
– Limited slip, front and rear (contact Cat Work Tools) Guard, power train
– Extreme temperature seals Lights, signal LED Guard, front window
– Seal guards Product Link, satellite Guard, complete cab
– Axle oil cooler Control, aggregate autodig Guard, front window (Logger)
Hydraulics arrangement, 3 valve Joystick, 2 valve Autolube
Cold start package (120V) Joystick, 3 valve Fenders, roading with fender extensions
Comfort package Payload control system front/rear
Work lighting package, halogen Printer, payload CNTL system Precleaner, HVAC
Work lighting package, HID Radio, AM/FM CD/MP3 player Precleaner, turbine
Forestry package Radio, CB (ready) Precleaner, turbine/trash
Industrial package Radio, Satellite – XM (Bluetooth capable) Oil change system, high speed
High lift, 2 valve Radio, Satellite – Sirus (Bluetooth capable) Sound suppression (low) NACD
High lift, 3 valve Steering secondary Fan, variable pitch
Filter, carbon fresh air Antifreeze, –50° C (–58° F)
26
Notes
27
966K Wheel Loader
For
more
complete
information
on
Cat
products,
dealer
services,
and
industry
solutions,
visit
us
on
the
web
at
www.cat.com
AEHQ6211-01
(07-2011)
©
2011
Caterpillar
Inc.
All
rights
reserved
Materials
and
specifications
are
subject
to
change
without
notice.
Featured
machines
in
photos
may
include
additional
equipment.
See
your
Cat
dealer
for
available
options.
CAT,
CATERPILLAR,
SAFETY.CAT.COM,
their
respective
logos,
“Caterpillar
Yellow”
and
the
“Power
Edge”
trade
dress,
as
well
as
corporate
and
product
identity
used
herein,
are
trademarks
of
Caterpillar
and
may
not
be
used
without
permission.

Wheel Loader: Engine Buckets Weights

Uploaded by

Copyright:

Available Formats

Wheel Loader: Engine Buckets Weights

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Wheel Loader: Engine Buckets Weights

Uploaded by

Copyright:

Available Formats

966K

Performance Series Buckets

Load Sensing Hydraulics

Cat® C9.3 ACERT™ Engine

Fuel Effi ciency

and productive operator environment. The innovative

efficiency and increased power density while meeting

all Tier 4 Interim/Stage IIIB emission standards.

The reliability, durability, and versatility of the 966K

result in a machine that is better built to meet your

needs. All day. Every day.

Cold Start/High Altitude Package

Renowned Cat Dealer Support

Load Sensing Hydraulics

Work Tools for Many Job Site Requirements

Performance Series Buckets:

Lower Operating Costs

Performance Series Bucket Styles

Improved Machine Performance

Common Interface Compatibility

Electro-Hydraulic (EH) Joystick Steering with

Implement Controls (EH)

Sound and Vibration

Entry and Exit

Control Panels and Park Brake Switch

Electrical Service Center

Hydraulic Service Center

The 966K is designed to compliment your business plan,

Customer Support Agreements

Engine Operating Specifications Hydraulic System

1 Height to Top of ROPS 3547 mm 11'7"

Bucket Type General Purpose – Pin On

Bucket Type General Purpose – Pin On

Bucket Type General Purpose – Fusion QC

Bucket Type General Purpose – Fusion QC Material Handling – Pin On

Bucket Selection Chart

Material Density kg/m3

Material Density lb/yd3 1,180 1,348

Material Density kg/m3

Material Density lb/yd3 1,180 1,348

Bucket Fill Factors

Loose Material Performance Series Bucket

POWER TRAIN OPERATOR ENVIRONMENT TIRES

Power Train Quick coupler Seat belt, 76 mm (3") wide

You might also like