950 K
950 K
Wheel Loader
Engine
Engine Model
Cat C7.1 ACERT
Max Engine Power (1,900 rpm) ISO 14396
172 kW
230 hp
Max Engine Power (1,900 rpm) ISO 14396 (metric)
234 hp
Max Net Power (1,900 rpm) SAE J1349
157 kW
211 hp
Buckets
Bucket Capacities
Weights
Operating Weight
2.50 to 9.20 m3
19 425 kg
42,811 lb
Contents
Reliability ..............................................................3
Durability ..............................................................4
Productivity ..........................................................5
Versatility ..............................................................6
Serviceability .......................................................9
Sustainability .....................................................12
Reliability
Structures
The K Series features many components which leverage
product designs that have delivered a reliable and durable
machine for generations.
Strata Precleaner
The system removes 93% of the dust particles before the
airhas reached the primary engine air filter. As air enters
theprecleaner, stationary vanes cause the incoming air to
spin. The resulting centrifugal force spins dust and dirt to
theouter walls where they are ejected out into the exhaust
stream, while the clean air flows down the center of the tube
and continues into the primary air filter. The primary benefit
is extended filter life.
Monitoring Programs
Monitoring product health is key to maintaining reliability of
any equipment. Many programs offered by Caterpillar make
the tracking of the customers machine health quick and
easy. These programs include Product Link, VisionLink,
and SOSSM Services.
Durability
Frames
The robotically welded two-piece structural frame design
provides a rugged and reliable foundation for the machine
that improves stability, performance, and serviceability.
Arobust articulating hitch system joins the front and rear
frames improving durability. Enhanced line routings across
the hitch joint streamline the manufacturing process and
improve reliability and durability.
Engine
The new Cat C7.1 ACERT engine was designed to optimize
power density. It uses a combination of technologies to reduce
regulated emissions while ensuring high performance and
excellent fuel efficiency. An upgraded ADEM 4 electronic
control module manages the combustion process and a new
high-pressure common rail fuel system allows precise
injection timing for a clean, efficient fuel burn. The rugged
Cat Clean Emissions Module is securely rubber mounted
onits own platform above the engine and contains a
DieselOxidation Catalyst, Diesel Particulate Filter and
CatRegeneration System. Regeneration, the process by
which soot is removed from the Diesel Particulate Filter,
iscompletely automatic and does not interrupt the
machineswork cycle.
Emissions
The 950K features a Cat C7.1 ACERT engine and a
CatClean Emissions Module to deliver the performance
andefficiency that customers demand, while meeting Tier 4
Interim/Stage IIIB emission standards. The six-cylinder
electronic engine is turbocharged and aftercooled.
ACERTTechnology is a combination of building blocks
that includes electronics, fuel systems, air management
systems and aftertreatment components. The system is
optimized based on engine size, the type of application and
the geographic location in which it will work. The technologies
are applied systematically and strategically to meet high
customer expectations for productivity, fuel efficiency,
reliability and service life.
Axles
The axles are designed to handle extreme applications
resulting in reliable performance and extended life. The front
axle is rigidly mounted to the frame in order to withstand
internal torque loads and still maintain support for the wheel
loader. The rear axle can oscillate to 13 degrees helping to
ensure all four wheels stay on the ground providing stability
even in the roughest terrain.
Productivity
Z-bar Linkage
Caterpillar engineers used an innovative systems integration approach to completely redesign the linkage system to meet
customer needs in many applications. Development of the new optimized Z-bar linkage was done in conjunction with the
Performance Series Buckets, Fusion coupler and Fusion family of work tools to ensure that all components function
togetherto optimize visibility, performance and fuel efficiency. Visibility has been optimized by placing line routings and
structural components out of the operators sight lines. New parallel lift capabilities and a 30 to 60 percent increase in tilt
forceat maximum lift enhance performance and versatility.
Ride Control
Ride control provides the operator with a smoother ride over rough terrain, enabling a more comfortable ride at higher speeds.
The benefit is reduced cycle times higher productivity and better fuel efficiency while performing load and carry applications.
The system works by using an accumulator to dampen the linkage motion, acting as a shock absorber.
Torque Converter
The 950K torque converter has been optimized to improve fuel efficiency and deliver more power to the ground.
Transmission
The K Series transmissions incorporate a new shifting strategy that delivers smoother shifts, faster acceleration, and better
performance climbing a grade. When placing the transmission into forward gear, the machine will automatically start in second
gear. With the further enhancement of a torque based 2 to 1 downshift, the downshift will only occur based on machine load.
Owners and operators will fully benefit from utilizing the automatic 1-4 transmission mode, which results in lower fuel
consumption and optimal machine performance.
5
Versatility
Higher Productivity
Performance Series Buckets achieve higher fill factors
ranging from 100% to 115% depending on the machine
application and material type. The buckets feature optimized
geometry with a bucket opening matched to the machines
linkage and incorporate a curved side profile to maximize
material retention. The optimized design results in unsurpassed
production capabilities.
No Loss of Performance
Imagine lifting a hundred pound box with your arms fully extended.
Now imagine lifting that same load close to your body. Thats the
genius of Fusion: designed to integrate the work tool and the machine
by pulling the coupler and tool closer in to the loader. As a result, the
center of gravity is moved inward, towards the machine. This translates
to increased lifting ability when compared to machines equipped with
other coupler systems.
Unsurpassed Durability
An advanced wedging mechanism creates a tight, rattle-free fit.
Thispatented lock up system eliminates play and wear resulting
inalong service life. Wedges pull the attachment tight to the machine
intwo directions in and down. Constant hydraulic pressure on the
coupler wedges compensate for wear, assuring a tight fit through the
life ofthe coupler. Tight fit gives better tool control and increased
productivity. Coupler durability is substantially increased over
traditional couplers.
Fusion eliminates
coupler offset...
...with
substantial
improvements in
center of gravity.
Enhanced Visibility
An open coupler frame design clears sight lines from the operators
seat, making it easier than ever before to engage and disengage
attachments with certainty. Offset tines and other design changes to
Fusion Pallet Forks, working in conjunction with the Fusion Coupler,
enhancing visibility substantially at ground level and truck bed height
when compared to traditional coupler and fork combinations.
Versatility
Z-Bar Linkage
Enhanced Visibility
By lowering the structural torque tube and optimizing the
hydraulic lines routings, the 950K Medium Wheel Loader
offers best in class visibility. The Fusion Coupler wedge
cylinders are offset to enhance line of sight to fork tips at
ground level, truck bed height, and most of the lift range.
Serviceability
Engine Access
The K Series retains the Cat sloped one-piece tilting hood, which has become one of our brands
hallmarks and provides industry-leading access to the engine, Cat Clean Emissions Module (CEM)
andother components but with fresh new styling clearly distinct from the H Series. New to the loaders
is a rear clamshell hood design that allows quick access to the engine oil dipstick and fill, fuel fill port,
and cooler cores.
Cooling System
The cooling system is readily accessible for clean out and maintenance. With six cooling fins per inch and
a perforated grill, most airborne debris entering the system passes through the cooler cores. Thecooler
cores swing out providing easy access for cleaning; an option variable pitch fan is available toautomatically
purge the cooler cores by periodically reversing the airflow.
Operator Environment
Conventional Steering
The conventional steering configuration offers a low-effort
hand metering unit hydraulic steering system. Load sensing
steering directs power through the steering system only when
needed. The optional Command Control Steering is still
offered on the 950K and is a load sensing system that links
the steering wheel and frame angle positions to provide the
proper amount of steering control. Full machine articulation
is accomplished with a 70 degrees turn of the wheel versus
two or three 360 degree turns on a conventional steering wheel.
Seat
The Cat Optimized Seating System is 6-way adjustable to
accommodate operators of all sizes. The seat has a one piece
high back that supports the lumbar area of the back up through
the shoulders. Both armrests are large and can be adjusted
up, down, fore, and aft to enhance comfort and convenience.
An optional feature for the cab seat is a heated backrest
andcushion.
Information Display
The central display panel has a large text box, five analog
like gauges, and LED warning indicators. The large text box
provides in-language information about machine operation,
feature activation and system troubleshooting and calibration.
With the 5 large analog-type gauges the operator can easily
identify if key systems are within normal operating range.
Aresettable trip totals function has been incorporated to
display information for average fuel consumed, total fuel
consumed, idle fuel, idle time, operating hours, odometer, etc.
10
Visibility
Visibility has been enhanced by adding a convex windshield
and eliminating two cab posts. The cab has a clean and clear
panoramic view to enhance safe operation of the machine.
External rearview mirrors are mounted on the cab to provide
all around visibility. The external mirrors fold horizontally to
provide fast, safe access to clean the window from the front
platform. Optional heated and powered mirrors are available
to further improve visibility in cold climates.
Rearview Camera
With the new standard rearview camera, visibility is greatly
enhanced. The camera is located in a pocket on the grill to
protect it from damage and the elements. The camera can
beset to activate only when the transmission is in reverse to
help eliminate distractions in the cab, especially when in dark
environments. Two rear work lights are located in the rear
grill and can be activated to illuminate the area behind the
machine in low light conditions.
11
Sustainability
Conserving Resources
Customer Support
Machine Selection
Cat dealers are ready to help evaluate machine options;
from new or used machine sales, to rental or rebuild
options, Cat dealers can provide an optimal solution
tomeet customer business needs.
Product Support
Cat dealers are with customers every step of the way
tomaximize machine uptime by providing unsurpassed
worldwide parts support, trained technicians and
customer support agreements.
Operation
To help maximize the return on your investment,
operating techniques.
Financing
Cat dealers offer financing options to meet a variety
ofcustomer needs.
12
Owning Costs
Monitoring Systems
Monitoring product health is key to optimizing the life
ofaninvestment into a Cat Wheel Loader.
Parts Availability
Caterpillar provides an unsurpassed level of personalized
service to help you work more cost effective and efficient.
Byutilizing a worldwide parts network Cat dealers help
minimize machine downtime and save money by delivering
replacement parts within 24 hours.
Resale Value
Owning quality equipment is an important factor in
maintaining resale value. Caterpillar is not only known
formachines that are better built, but provides product
anddealer support to maintain the reliability and durability
of your machine.
13
Operating Costs
Data from customer machines show Cat wheel loaders are among the most fuel efficient machines in the industry.
Performance Series Buckets Deliver faster fill times and better material retention, ultimately reducing cycle times while
Load-Sensing Hydraulics Provides only the hydraulic flow required by the implement and steering systems for improved
C7.1 ACERT Engine Power dense engine enables a more fuel-efficient method to meet emission standards.
Fuel Management System (FMS) Optimizes power for maximum fuel savings with minimal impact on production.
Engine Idle Shutdown Automatic engine and electrical system shutdown conserves fuel.
Torque Converter Transfers more power to the ground and optimizes fuel efficiency in all applications.
Shift Strategy Reduced torque interruption increases driveline efficiency, conserving fuel. Auto 1-4 transmission mode
keeps engine rpm low, reducing fuel consumption while delivering optimal machine performance.
Machine configuration, operator technique, and job site layout can impact fuel consumption by as much as 30 percent.
Machine Configuration Select the correct work tool and tire type based on machine application. Radial tires are preferred;
ensure proper inflation pressures. Heavier tires burn more fuel. Keep engine rpm low by using auto 1-4 transmission mode.
Job Site Layout Spot loading targets in the right position. Avoid traveling more than twice the machine length during
short cycle loading. Reduce transport distance for load and carry cycles by optimizing job site layout.
Loading Bucket Load in first gear and keep engine rpm low. Raise and tilt bucket smoothly and do not use a pumpingmotion.
Avoid lift lever detent and use transmission neutralizer.
Loading Truck or Hopper Do not raise the work tool any higher than necessary. Keep engine rpm low and unload
incontrolled manner.
Idle Set the parking brake to engage Engine Idle Management System.
14
Engine
Buckets
Engine Model
Max Gross Power
(1,900 rpm)
SAEJ1995
Max Gross Power
(1,900 rpm)
SAEJ1995 (metric)
Max Net Power
(1,900 rpm)
ISO9249
Max Net Power
(1,900 rpm)
ISO9249 (metric)
Max Net Power
(1,900 rpm)
SAEJ1349
Max Net Power
(1,900 rpm)
SAEJ1349 (metric)
Max Net Power
(1,900 rpm)
EEC80/1269
Max Net Power
(1,900 rpm)
EEC80/1269
(metric)
Max Engine Power
(1,900 rpm)
ISO14396
Max Engine Power
(1,900 rpm)
ISO14396 (metric)
Peak Gross Torque
(1,300 rpm)
SAEJ1995
Peak Net Torque
(1,400 rpm)
SAEJ1349
Bore
Stroke
Displacement
Hydraulic System
Bucket Capacities
2.50 to
9.20 m3
3.25 to
12.00 yd3
157 kW
211 hp
213 hp
157 kW
211 hp
213 hp
157 kW
211 hp
213 hp
172 kW
230 hp
234 hp
1054 Nm
777 ft-lb
988 Nm
729 ft-lb
105 mm
135 mm
7.01 L
4.1 in
5.3 in
427.8 in3
Operating Specifications
Static tipping load
full 40 turn
ISO14397-1*
Static tipping load
full 40 turn
RigidTires**
Breakout Force
3
11 008 kg
24,261 lb
11 774 kg
25,951 lb
161 kN
36,203 lb
Transmission
Forward 1
Forward 2
Forward 3
Forward 4
Reverse 1
Reverse 2
Reverse 3
Reverse 4
6.9 km/h
12.9 km/h
22.7 km/h
37.9 km/h
7.5 km/h
14.1 km/h
24.8 km/h
39.8 km/h
4.3 mph
8.0 mph
14.1 mph
23.6 mph
4.7 mph
8.8 mph
15.4 mph
24.7 mph
Steering System
Pump Type
Implement System
Maximum Pump
Implement System
Maximum Operating
Pressure
Implement System
Optional 3rd and
4th Function
MaximumFlow
Implement System
Optional 3rd and
4thFunction
Maximum Pressure
Hydraulic Cycle
Time Raise from
Carry Position
Hydraulic Cycle
Time Dump, at
Maximum Raise
Hydraulic Cycle
Time Lower,
Empty, Float Down
Hydraulic Cycle
Time Total
Piston
340 L/min 90 gal/min
5.9 Seconds
1.8 Seconds
2.5 Seconds
10 Seconds
Brakes
Brakes
Meet OSHA,
SAEJ1473 OCT90
and ISO 3450-1985
required standards
Weights
Operating Weight
3
19 425 kg
42,811 lb
15
Axles
Front
Rear
Maximum SingleWheel Rise and Fall
Cab
Fixed
Oscillating
13 degrees
481 mm
18.9 in
Tires
Choose from a variety of tires to match
your application.
Choices include:
750/65R25 VLT BS E3/L3 Radial
23.5R25 RT3B GY L3
23.5R25 GP4D GY L4
23.5R25 VJT BS E3/L3 Radial
23.5R25 XHA2 MX L3 Radial
23.5R25 VMT BS L3 Radial
23.5R25 XLDD2 MX L5 Radial
Cat Flexport
NOTE: In certain applications (such as load
and carry), the loaders productive capabilities
might exceed the tires tonnes-km/h (ton-mph)
capabilities. Caterpillar recommends that
you consult a tire supplier to evaluate all
conditions before selecting a tire model.
Other special tires are available on request.
16
ROPS/FOPS
Sound
Fuel Tank
Standard
Cooling System
Crankcase
Transmission
Differentials and
Final Drives Front
Differentials and
Final Drives Rear
Hydraulic Tank
314 L
83 gal
60 L
18 L
43 L
43 L
15.9 gal
4.8 gal
11.4 gal
11.4 gal
43 L
11.4 gal
189 L
49.9 gal
Dimensions
10
17
15
16
19
11
18
5
2
3
13
14
6
12
9
7
3356 mm
11'0"
3099 mm
10'2"
2415 mm
7'11"
397 mm
1'3"
4021 mm
4526 mm
1905 mm
13'2"
14'10"
6'3"
7 Wheelbase
8 B-Pin Height @ Carry Standard
3350 mm
10'11"
659 mm
26"
1510 mm
4'11"
59 degrees
51 degrees
46 degrees
746 mm
2'3"
3275 mm
3625 mm
10'7"
11'9"
5952 mm
19'6"
3233 mm
10'7"
2719 mm
8'11"
6025 mm
19'9"
38 degrees
Turning Radius
All dimensions are approximate and based on L3 Michelin XHA2 tires.
17
Dimensions
All dimensions are approximate and based on L3 Michelin XHA2 tires.
7
12
2
10
9
13
11
8
14
16
15
1219 mm
48.0"
1524 mm
60.0"
1829 mm
72.0"
2438 mm
96.0"
610 mm
24.0"
762 mm
30.0"
915 mm
36.0"
1219 mm
48.0"
9742 kg
21,471 lb
9232 kg
20,347 lb
8763 kg
19,313 lb
7924 kg
17,464 lb
8436 kg
18,592 lb
7985 kg
17,599 lb
7570 kg
16,685 lb
6827 kg
15,047 lb
4218 kg
9,296 lb
3993 kg
8,800 lb
3785 kg
8,343 lb
3414 kg
7,523 lb
5061 kg
11,155 lb
4791 kg
10,559 lb
4542 kg
10,011 lb
4096 kg
9,028 lb
6749 kg
14,874 lb
6388 kg
14,079 lb
6056 kg
13,348 lb
5424 kg
11,954 lb
8469 mm
333.4"
8774 mm
345.4"
9079 mm
357.4"
9688 mm
381.4"
1189 mm
46.8"
1189 mm
46.8"
1189 mm
46.8"
1189 mm
46.8"
22 mm
0.9"
22 mm
0.9"
22 mm
0.9"
22 mm
0.9"
1728 mm
68.0"
1728 mm
68.0"
1728 mm
68.0"
1728 mm
68.0"
1013 mm
39.9"
1013 mm
39.9"
1013 mm
39.9"
1013 mm
39.9"
1888 mm
74.3"
1888 mm
74.3"
1888 mm
74.3"
1888 mm
74.3"
3823 mm
150.5"
3823 mm
150.5"
3823 mm
150.5"
3823 mm
150.5"
4863 mm
191.5"
4863 mm
191.5"
4863 mm
191.5"
4863 mm
191.5"
2535 mm
99.8"
2292 mm
90.2"
2049 mm
80.7"
1563 mm
61.5"
53 degrees
2528 mm
99.5"
53 degrees
2528 mm
99.5"
53 degrees
2528 mm
99.5"
53 degrees
2528 mm
99.5"
1130 mm
44.5"
1130 mm
44.5"
1130 mm
44.5"
1130 mm
44.5"
2178 mm
85.7"
2178 mm
85.7"
2178 mm
85.7"
2178 mm
85.7"
576 mm
22.7"
576 mm
22.7"
576 mm
22.7"
576 mm
22.7"
180 mm
7.1"
180 mm
7.1"
180 mm
7.1"
180 mm
7.1"
Tine Thickness
90 mm
3.5"
90 mm
3.5"
90 mm
3.5"
90 mm
3.5"
Operating Weight
NOTE: Static tipping loads and operating weight are based on the following loader configuration: L3 Michelin XHA tires, air conditioning,
ride control, power train guard, full fluids, fuel tank, coolant, lubricants, and operator.
Specifications and ratings conform to the following standards: SAE* J1197, SAE J732, CEN** EN 474-3.
The rated operating load for a loader equipped with a pallet fork is determined by:
SAE J1197: 50% of full turn static tipping load or hydraulic limit.
CEN EN 474-3: 60% of full turn static tipping load on rough terrain or hydraulic limit.
CEN EN 474-3: 80% of full turn static tipping load on firm and level ground or hydraulic limit.
**SAE Society of Automotive Engineers
**CEN European Committee for Standardization
18
Dimensions
All dimensions are approximate and based on L3 Michelin XHA2 tires.
7
12
2
10
9
13
11
8
14
16
15
1219 mm
48.0"
1524 mm
60.0"
1829 mm
72.0"
2438 mm
96.0"
610 mm
24.0"
762 mm
30.0"
915 mm
36.0"
1219 mm
48.0"
9993 kg
22,024 lb
9491 kg
20,918 lb
8595 kg
18,943 lb
10 538 kg 23,226 lb
9096 kg
20,046 lb
8615 kg
18,989 lb
8174 kg
18,016 lb
7383 kg
16,273 lb
4548 kg
10,023 lb
4308 kg
9,494 lb
4087 kg
9,008 lb
3692 kg
8,137 lb
5457 kg
12,028 lb
5169 kg
11,393 lb
4904 kg
10,809 lb
4430 kg
9,764 lb
7276 kg
16,037 lb
6892 kg
15,191 lb
6539 kg
14,413 lb
5424 kg
11,954 lb
8619 mm
339.3"
8924 mm
351.3"
9229 mm
363.3"
9838 mm
387.3"
1189 mm
46.8"
1189 mm
46.8"
1189 mm
46.8"
1189 mm
46.8"
22 mm
0.9"
22 mm
0.9"
22 mm
0.9"
22 mm
0.9"
1728 mm
68.0"
1728 mm
68.0"
1728 mm
68.0"
1728 mm
68.0"
1013 mm
39.9"
1013 mm
39.9"
1013 mm
39.9"
1013 mm
39.9"
1888 mm
74.3"
1888 mm
74.3"
1888 mm
74.3"
1888 mm
74.3"
3823 mm
150.5"
3823 mm
150.5"
3823 mm
150.5"
3823 mm
150.5"
4863 mm
191.5"
4863 mm
191.5"
4863 mm
191.5"
4863 mm
191.5"
2535 mm
99.8"
2292 mm
90.2"
2049 mm
80.7"
1563 mm
61.5"
53 degrees
2528 mm
99.5"
53 degrees
2528 mm
99.5"
53 degrees
2528 mm
99.5"
53 degrees
2528 mm
99.5"
1130 mm
44.5"
1130 mm
44.5"
1130 mm
44.5"
1130 mm
44.5"
2178 mm
85.7"
2178 mm
85.7"
2178 mm
85.7"
2178 mm
85.7"
576 mm
22.7"
576 mm
22.7"
576 mm
22.7"
576 mm
22.7"
180 mm
7.1"
180 mm
7.1"
180 mm
7.1"
180 mm
7.1"
Tine Thickness
90 mm
3.5"
90 mm
3.5"
90 mm
3.5"
90 mm
3.5"
Operating Weight
NOTE: Static tipping loads and operating weight are based on the following loader configuration: L3 Michelin XHA tires, air conditioning,
ride control, power train guard, full fluids, fuel tank, coolant, lubricants, and operator.
Specifications and ratings conform to the following standards: SAE* J1197, SAE J732, CEN** EN 474-3.
The rated operating load for a loader equipped with a pallet fork is determined by:
SAE J1197: 50% of full turn static tipping load or hydraulic limit.
CEN EN 474-3: 60% of full turn static tipping load on rough terrain or hydraulic limit.
CEN EN 474-3: 80% of full turn static tipping load on firm and level ground or hydraulic limit.
**SAE Society of Automotive Engineers
**CEN European Committee for Standardization
19
Operating Specifications
Bucket Type
Edge Type
Capacity Rated ()
Capacity Struck ()
Width ()
Dump Clearance at Maximum Lift and 45 Discharge ()
Reach at Maximum Lift and 45 Discharge ()
Reach at Level Lift Arm and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket at Maximum Lift
Loader Clearance Circle with Bucket at Carry Position ()
Static Tipping Load, Straight (ISO)*
Static Tipping Load, Straight (Rigid Tire)*
Static Tipping Load, Articulated (ISO)*
Static Tipping Load, Articulated (Rigid Tire)*
Breakout Force** ()
Operating Weight*
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kN
lb
kg
lb
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
2.70
3.53
2.30
3.01
2927
9'7"
2975
9'9"
1356
4'5"
2562
8'4"
90
3.5"
8036
26'5"
5392
17'9"
13 689
44'11"
12 974
28,596
13 719
30,238
11 230
24,752
11 990
26,427
180
40,442
19 303
42,544
2.70
3.53
2.30
3.01
2994
9'9"
2859
9'4"
1469
4'9"
2723
8'11"
90
3.5"
8209
27'0"
5392
17'9"
13 856
45'6"
12 836
28,291
13 580
29,930
11 092
24,447
11 850
26,119
178
40,157
19 411
42,782
2.90
3.79
2.55
3.34
2927
9'7"
2919
9'6"
1395
4'6"
2631
8'7"
90
3.5"
8105
26'8"
5464
18'0"
13 729
45'1"
12 833
28,285
13 582
29,935
11 094
24,453
11 857
26,134
169
37,997
19 388
42,730
2.90
3.79
2.55
3.34
2994
9'9"
2802
9'2"
1506
4'11"
2792
9'1"
90
3.5"
8278
27'2"
5464
18'0"
13 897
45'8"
12 694
27,977
13 441
29,624
10 955
24,145
11 716
25,823
167
37,715
19 496
42,968
3.10
4.05
2.76
3.61
2927
9'7"
2876
9'5"
1429
4'8"
2688
8'9"
90
3.5"
8162
26'10"
5525
18'2"
13 762
45'2"
12 740
28,081
13 493
29,739
11 008
24,261
11 774
25,951
161
36,203
19 425
42,811
3.10
4.05
2.76
3.61
2994
9'9"
2758
9'0"
1540
5'0"
2849
9'4"
90
3.5"
8335
27'5"
5525
18'2"
13 931
45'9"
12 600
27,770
13 350
29,425
10 867
23,951
11 632
25,637
159
35,922
19 533
43,049
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
20
Operating Specifications
Bucket Type
Edge Type
Capacity Rated ()
Capacity Struck ()
Width ()
Dump Clearance at Maximum Lift and 45 Discharge ()
Reach at Maximum Lift and 45 Discharge ()
Reach at Level Lift Arm and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket at Maximum Lift
Loader Clearance Circle with Bucket at Carry Position ()
Static Tipping Load, Straight (ISO)*
Static Tipping Load, Straight (Rigid Tire)*
Static Tipping Load, Articulated (ISO)*
Static Tipping Load, Articulated (Rigid Tire)*
Breakout Force** ()
Operating Weight*
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kN
lb
kg
lb
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
3.30
4.32
2.94
3.85
2927
9'7"
2838
9'3"
1458
4'9"
2737
8'11"
90
3.5"
8211
27'0"
5571
18'4"
13 791
45'3"
12 620
27,815
13 374
29,477
10 892
24,006
11 660
25,700
154
34,742
19 494
42,964
3.30
4.32
2.94
3.85
2994
9'9"
2719
8'11"
1568
5'1"
2898
9'6"
90
3.5"
8384
27'7"
5571
18'4"
13 961
45'10"
12 478
27,503
13 231
29,161
10 750
23,694
11 517
25,384
153
34,463
19 602
43,202
3.40
4.45
3.04
3.98
2927
9'7"
2819
9'3"
1473
4'10"
2761
9'0"
90
3.5"
8235
27'1"
5597
18'5"
13 805
45'4"
12 577
27,719
13 332
29,384
10 850
23,915
11 620
25,611
151
34,071
19 518
43,017
3.40
4.45
3.04
3.98
2994
9'9"
2700
8'10"
1582
5'2"
2922
9'7"
90
3.5"
8408
27'8"
5597
18'5"
13 975
45'11"
12 434
27,406
13 188
29,067
10 708
23,601
11 476
25,294
150
33,792
19 626
43,255
3.60
4.71
3.18
4.16
2927
9'7"
2793
9'1"
1495
4'10"
2796
9'2"
90
3.5"
8270
27'2"
5630
18'6"
13 826
45'5"
12 506
27,564
13 263
29,232
10 783
23,767
11 554
25,467
147
33,133
19 554
43,097
3.60
4.71
3.18
4.16
2994
9'9"
2673
8'9"
1604
5'3"
2957
9'8"
90
3.5"
8443
27'9"
5630
18'6"
13 997
46'0"
12 363
27,249
13 118
28,914
10 640
23,452
11 410
25,148
146
32,855
19 662
43,335
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
21
Operating Specifications
General Purpose
PinOn
Bucket Type
Edge Type
Capacity Rated ()
Capacity Struck ()
Width ()
Dump Clearance at Maximum Lift and 45 Discharge ()
Reach at Maximum Lift and 45 Discharge ()
Reach at Level Lift Arm and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket at Maximum Lift
Loader Clearance Circle with Bucket at Carry Position ()
Static Tipping Load, Straight (ISO)*
Static Tipping Load, Straight (Rigid Tire)*
Static Tipping Load, Articulated (ISO)*
Static Tipping Load, Articulated (Rigid Tire)*
Breakout Force** ()
Operating Weight*
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kN
lb
kg
lb
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
3.80
4.97
3.36
4.39
2927
9'7"
2758
9'0"
1524
5'0"
2842
9'3"
90
3.5"
8316
27'4"
5678
18'8"
13 854
45'6"
12 407
27,345
13 165
29,017
10 688
23,558
11 461
25,261
142
31,963
19 609
43,218
3.80
4.97
3.36
4.39
2994
9'9"
2638
8'7"
1632
5'4"
3003
9'10"
90
3.5"
8489
27'11"
5678
18'8"
14 025
46'1"
12 263
27,028
13 020
28,697
10 545
23,241
11 316
24,941
141
31,687
19 717
43,456
2.70
3.53
2.32
3.03
2927
9'7"
2896
9'6"
1272
4'2"
2581
8'5"
90
3.5"
8055
26'6"
5618
18'6"
13 700
45'0"
12 803
28,219
13 531
29,823
11 078
24,417
11 821
26,054
176
39,722
19 326
42,593
2.70
3.53
2.32
3.03
2994
9'9"
2770
9'1"
1374
4'6"
2742
8'11"
90
3.5"
8228
27'0"
5618
18'6"
13 868
45'6"
12 666
27,916
13 392
29,517
10 941
24,115
11 683
25,749
175
39,437
19 434
42,831
2.90
3.79
2.52
3.30
2927
9'7"
2853
9'4"
1314
4'3"
2641
8'8"
90
3.5"
8115
26'8"
4975
16'4"
13 734
45'1"
12 688
27,965
13 419
29,575
10 969
24,177
11 715
25,820
167
37,667
19 382
42,717
2.90
3.79
2.52
3.30
2994
9'9"
2728
8'11"
1416
4'7"
2802
9'2"
90
3.5"
8288
27'3"
4975
16'4"
13 903
45'8"
12 550
27,660
13 279
29,267
10 831
23,871
11 575
25,512
166
37,384
19 490
42,955
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
22
Operating Specifications
Bucket Type
Edge Type
Capacity Rated ()
Capacity Struck ()
Width ()
Dump Clearance at Maximum Lift and 45 Discharge ()
Reach at Maximum Lift and 45 Discharge ()
Reach at Level Lift Arm and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket at Maximum Lift
Loader Clearance Circle with Bucket at Carry Position ()
Static Tipping Load, Straight (ISO)*
Static Tipping Load, Straight (Rigid Tire)*
Static Tipping Load, Articulated (ISO)*
Static Tipping Load, Articulated (Rigid Tire)*
Breakout Force** ()
Operating Weight*
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kN
lb
kg
lb
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
3.10
4.05
2.61
3.41
2927
9'7"
2821
9'3"
1346
4'5"
2686
8'9"
90
3.5"
8160
26'10"
5483
18'0"
13 761
45'2"
12 595
27,760
13 328
29,375
10 881
23,982
11 628
25,629
161
36,235
19 432
42,827
3.10
4.05
2.61
3.41
2994
9'9"
2696
8'10"
1448
4'9"
2847
9'4"
90
3.5"
8333
27'5"
5483
18'0"
13 930
45'9"
12 456
27,453
13 187
29,065
10 741
23,675
11 487
25,319
160
35,954
19 540
43,065
3.30
4.32
2.78
3.64
2927
9'7"
2789
9'1"
1378
4'6"
2731
8'11"
90
3.5"
8205
27'0"
5527
18'2"
13 787
45'3"
12 504
27,560
13 239
29,178
10 794
23,791
11 543
25,442
155
34,901
19 480
42,933
3.30
4.32
2.78
3.64
2994
9'9"
2664
8'8"
1480
4'10"
2892
9'5"
90
3.5"
8378
27'6"
5527
18'2"
13 957
45'10"
12 364
27,251
13 097
28,866
10 654
23,482
11 402
25,130
154
34,621
19 588
43,171
3.40
4.45
2.92
3.82
2927
9'7"
2761
9'0"
1406
4'7"
2771
9'1"
90
3.5"
8245
27'1"
5566
18'4"
13 811
45'4"
12 426
27,387
13 162
29,009
10 719
23,626
11 470
25,282
150
33,788
19 520
43,021
3.40
4.45
2.92
3.82
2994
9'9"
2636
8'7"
1508
4'11"
2932
9'7"
90
3.5"
8418
27'8"
5566
18'4"
13 981
45'11"
12 285
27,076
13 019
28,695
10 579
23,316
11 328
24,968
149
33,510
19 628
43,259
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
23
Operating Specifications
Bucket Type
Edge Type
Capacity Rated ()
Capacity Struck ()
Width ()
Dump Clearance at Maximum Lift and 45 Discharge ()
Reach at Maximum Lift and 45 Discharge ()
Reach at Level Lift Arm and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket at Maximum Lift
Loader Clearance Circle with Bucket at Carry Position ()
Static Tipping Load, Straight (ISO)*
Static Tipping Load, Straight (Rigid Tire)*
Static Tipping Load, Articulated (ISO)*
Static Tipping Load, Articulated (Rigid Tire)*
Breakout Force** ()
Operating Weight*
Handling Pin On
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kN
lb
kg
lb
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
3.60
4.71
3.15
4.12
2927
9'7"
2729
8'11"
1438
4'8"
2816
9'2"
90
3.5"
8290
27'3"
5614
18'6"
13 838
45'5"
12 338
27,194
13 076
28,820
10 636
23,443
11 389
25,102
145
32,610
19 564
43,118
3.60
4.71
3.15
4.12
2994
9'9"
2604
8'6"
1540
5'0"
2977
9'9"
90
3.5"
8463
27'10"
5614
18'6"
14 009
46'0"
12 196
26,882
12 933
28,504
10 495
23,131
11 246
24,787
143
32,333
19 672
43,356
3.80
4.97
3.28
4.29
2927
9'7"
2693
8'10"
1474
4'10"
2867
9'4"
90
3.5"
8341
27'5"
5662
18'7"
13 869
45'6"
12 236
26,969
12 976
28,599
10 539
23,228
11 294
24,892
139
31,355
19 618
43,237
3.80
4.97
3.28
4.29
2994
9'9"
2568
8'5"
1576
5'2"
3028
9'11"
90
3.5"
8514
28'0"
5662
18'7"
14 041
46'1"
12 093
26,654
12 832
28,281
10 396
22,914
11 150
24,574
138
31,079
19 726
43,475
3.30
4.32
2.78
3.64
2927
9'7"
2789
9'1"
1378
4'6"
2731
8'11"
90
3.5"
8205
27'0"
5536
18'2"
13 787
45'3"
12 429
27,395
13 164
29,014
10 719
23,626
11 469
25,278
154
34,775
19 551
43,089
3.30
4.32
2.78
3.64
2994
9'9"
2664
8'8"
1480
4'10"
2892
9'5"
90
3.5"
8378
27'6"
5536
18'2"
13 957
45'10"
12 287
27,081
13 020
28,696
10 577
23,312
11 325
24,961
153
34,485
19 659
43,327
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
24
Operating Specifications
Bucket Type
Edge Type
Capacity Rated ()
Capacity Struck ()
Width ()
Dump Clearance at Maximum Lift and 45 Discharge ()
Reach at Maximum Lift and 45 Discharge ()
Reach at Level Lift Arm and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket at Maximum Lift
Loader Clearance Circle with Bucket at Carry Position ()
Static Tipping Load, Straight (ISO)*
Static Tipping Load, Straight (Rigid Tire)*
Static Tipping Load, Articulated (ISO)*
Static Tipping Load, Articulated (Rigid Tire)*
Breakout Force** ()
Operating Weight*
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kN
lb
kg
lb
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
3.40
4.45
3.03
3.96
2927
9'7"
2761
9'0"
1406
4'7"
2771
9'1"
90
3.5"
8245
27'1"
5575
18'4"
13 811
45'4"
12 311
27,134
13 047
28,757
10 605
23,373
11 356
25,029
149
33,621
19 628
43,259
3.40
4.45
3.03
3.96
2994
9'9"
2636
8'7"
1508
4'11"
2932
9'7"
90
3.5"
8418
27'8"
5575
18'4"
13 981
45'11"
12 168
26,819
12 902
28,438
10 461
23,058
11 211
24,709
148
33,333
19 736
43,497
3.60
4.71
3.20
4.19
2927
9'7"
2726
8'11"
1442
4'8"
2821
9'3"
90
3.5"
8295
27'3"
5621
18'6"
13 841
45'5"
12 206
26,903
12 943
28,528
10 505
23,153
11 257
24,812
143
32,311
19 680
43,373
3.60
4.71
3.20
4.19
2994
9'9"
2600
8'6"
1544
5'0"
2982
9'9"
90
3.5"
8468
27'10"
5621
18'6"
14 012
46'0"
12 062
26,585
12 798
28,207
10 361
22,836
11 112
24,490
142
32,025
19 788
43,612
3.80
4.97
3.28
4.29
2927
9'7"
2693
8'10"
1474
4'10"
2867
9'4"
90
3.5"
8341
27'5"
5649
18'7"
13 869
45'6"
12 113
26,698
12 853
28,328
10 416
22,958
11 170
24,620
138
31,179
19 729
43,481
3.80
4.97
3.28
4.29
2994
9'9"
2568
8'5"
1576
5'2"
3028
9'11"
90
3.5"
8514
28'0"
5649
18'7"
14 041
46'1"
11 968
26,379
12 706
28,005
10 271
22,638
11 024
24,297
137
30,894
19 837
43,720
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
25
Operating Specifications
Bucket Type
Edge Type
Capacity Rated ()
Capacity Struck ()
Width ()
Dump Clearance at Maximum Lift and 45 Discharge ()
Reach at Maximum Lift and 45 Discharge ()
Reach at Level Lift Arm and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket at Maximum Lift
Loader Clearance Circle with Bucket at Carry Position ()
Static Tipping Load, Straight (ISO)*
Static Tipping Load, Straight (Rigid Tire)*
Static Tipping Load, Articulated (ISO)*
Static Tipping Load, Articulated (Rigid Tire)*
Breakout Force** ()
Operating Weight*
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kN
lb
kg
lb
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
2.70
3.53
2.30
3.01
2927
9'7"
2936
9'7"
1402
4'7"
2622
8'7"
90
3.5"
8096
26'7"
5424
17'10"
13 714
45'0"
12 379
27,283
13 113
28,903
10 661
23,497
11 411
25,150
170
38,308
19 778
43,589
2.70
3.53
2.30
3.01
2994
9'9"
2820
9'3"
1516
4'11"
2783
9'1"
90
3.5"
8269
27'2"
5424
17'10"
13 884
45'7"
12 241
26,979
12 974
28,596
10 523
23,194
11 271
24,843
169
38,025
19 886
43,827
2.90
3.79
2.55
3.34
2927
9'7"
2880
9'5"
1440
4'8"
2691
8'9"
90
3.5"
8165
26'10"
5497
18'1"
13 755
45'2"
12 265
27,032
13 003
28,659
10 552
23,257
11 305
24,917
160
36,105
19 840
43,727
2.90
3.79
2.55
3.34
2994
9'9"
2763
9'0"
1552
5'1"
2852
9'4"
90
3.5"
8338
27'5"
5497
18'1"
13 926
45'9"
12 125
26,725
12 862
28,349
10 413
22,950
11 164
24,606
159
35,825
19 948
43,965
3.10
4.05
2.76
3.61
2927
9'7"
2837
9'3"
1475
4'10"
2748
9'0"
90
3.5"
8222
27'0"
5558
18'3"
13 789
45'3"
12 155
26,790
12 896
28,423
10 448
23,029
11 204
24,694
153
34,451
19 894
43,847
3.10
4.05
2.76
3.61
2994
9'9"
2718
8'11"
1585
5'2"
2909
9'6"
90
3.5"
8395
27'7"
5558
18'3"
13 961
45'10"
12 015
26,481
12 754
28,111
10 308
22,720
11 062
24,382
152
34,172
20 002
44,085
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
26
Operating Specifications
Bucket Type
Edge Type
Capacity Rated ()
Capacity Struck ()
Width ()
Dump Clearance at Maximum Lift and 45 Discharge ()
Reach at Maximum Lift and 45 Discharge ()
Reach at Level Lift Arm and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket at Maximum Lift
Loader Clearance Circle with Bucket at Carry Position ()
Static Tipping Load, Straight (ISO)*
Static Tipping Load, Straight (Rigid Tire)*
Static Tipping Load, Articulated (ISO)*
Static Tipping Load, Articulated (Rigid Tire)*
Breakout Force** ()
Operating Weight*
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kN
lb
kg
lb
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
3.30
4.32
2.94
3.85
2927
9'7"
2798
9'2"
1503
4'11"
2797
9'2"
90
3.5"
8271
27'2"
5604
18'5"
13 818
45'5"
12 065
26,591
12 808
28,230
10 363
22,840
11 120
24,510
147
33,132
19 941
43,949
3.30
4.32
2.94
3.85
2994
9'9"
2679
8'9"
1613
5'3"
2958
9'8"
90
3.5"
8444
27'9"
5604
18'5"
13 991
45'11"
11 924
26,280
12 665
27,915
10 221
22,529
10 978
24,196
146
32,855
20 049
44,187
3.40
4.45
3.04
3.98
2927
9'7"
2779
9'1"
1518
4'11"
2821
9'3"
90
3.5"
8295
27'3"
5630
18'6"
13 833
45'5"
12 023
26,499
12 767
28,139
10 322
22,751
11 081
24,424
144
32,517
19 964
44,001
3.40
4.45
3.04
3.98
2994
9'9"
2660
8'8"
1627
5'4"
2982
9'9"
90
3.5"
8468
27'10"
5630
18'6"
14 006
46'0"
11 881
26,187
12 624
27,823
10 181
22,439
10 938
24,108
143
32,240
20 072
44,239
3.60
4.71
3.18
4.16
2927
9'7"
2753
9'0"
1539
5'0"
2856
9'4"
90
3.5"
8330
27'4"
5664
18'7"
13 854
45'6"
11 957
26,355
12 703
27,998
10 260
22,614
11 021
24,290
140
31,655
19 998
44,076
3.60
4.71
3.18
4.16
2994
9'9"
2633
8'7"
1648
5'4"
3017
9'10"
90
3.5"
8503
27'11"
5664
18'7"
14 028
46'1"
11 815
26,041
12 559
27,681
10 118
22,301
10 877
23,973
139
31,379
20 106
44,314
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
27
Operating Specifications
General Purpose
Fusion QC
Bucket Type
Edge Type
Capacity Rated ()
Capacity Struck ()
Width ()
Dump Clearance at Maximum Lift and 45 Discharge ()
Reach at Maximum Lift and 45 Discharge ()
Reach at Level Lift Arm and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket at Maximum Lift
Loader Clearance Circle with Bucket at Carry Position ()
Static Tipping Load, Straight (ISO)*
Static Tipping Load, Straight (Rigid Tire)*
Static Tipping Load, Articulated (ISO)*
Static Tipping Load, Articulated (Rigid Tire)*
Breakout Force** ()
Operating Weight*
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kN
lb
kg
lb
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
3.80
4.97
3.36
4.39
2927
9'7"
2718
8'11"
1568
5'1"
2902
9'6"
90
3.5"
8376
27'6"
5711
18'9"
13 883
45'7"
11 871
26,165
12 619
27,813
10 178
22,434
10 941
24,114
136
30,581
20 043
44,175
3.80
4.97
3.36
4.39
2994
9'9"
2598
8'6"
1677
5'6"
3063
10'0"
90
3.5"
8549
28'1"
5711
18'9"
14 057
46'2"
11 728
25,849
12 474
27,494
10 035
22,118
10 796
23,795
134
30,306
20 151
44,413
2.70
3.53
2.20
2.88
2927
9'7"
2853
9'4"
1314
4'3"
2641
8'8"
90
3.5"
8115
26'8"
5418
17'10"
13 725
45'1"
12 234
26,965
12 953
28,548
10 535
23,220
11 269
24,837
167
37,672
19 784
43,602
2.70
3.53
2.20
2.88
2994
9'9"
2728
8'11"
1416
4'7"
2802
9'2"
90
3.5"
8288
27'3"
5418
17'10"
13 895
45'8"
12 097
26,663
12 815
28,244
10 398
22,918
11 131
24,533
166
37,389
19 892
43,840
2.90
3.79
2.40
3.14
2927
9'7"
2811
9'2"
1357
4'5"
2701
8'10"
90
3.5"
8175
26'10"
5480
18'0"
13 761
45'2"
12 130
26,734
12 851
28,323
10 436
23,001
11 172
24,624
159
35,805
19 836
43,717
2.90
3.79
2.40
3.14
2994
9'9"
2685
8'9"
1459
4'9"
2862
9'4"
90
3.5"
8348
27'5"
5480
18'0"
13 932
45'9"
11 992
26,430
12 711
28,016
10 298
22,697
11 033
24,317
158
35,524
19 944
43,955
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
28
Operating Specifications
Bucket Type
Edge Type
Capacity Rated ()
Capacity Struck ()
Width ()
Dump Clearance at Maximum Lift and 45 Discharge ()
Reach at Maximum Lift and 45 Discharge ()
Reach at Level Lift Arm and Bucket Level ()
Digging Depth ()
Overall Length
Overall Height with Bucket at Maximum Lift
Loader Clearance Circle with Bucket at Carry Position ()
Static Tipping Load, Straight (ISO)*
Static Tipping Load, Straight (Rigid Tire)*
Static Tipping Load, Articulated (ISO)*
Static Tipping Load, Articulated (Rigid Tire)*
Breakout Force** ()
Operating Weight*
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kN
lb
kg
lb
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
Teeth and
Segments
3.10
4.05
2.61
3.41
2927
9'7"
2779
9'1"
1389
4'6"
2746
9'0"
90
3.5"
8220
27'0"
5517
18'2"
13 788
45'3"
12 038
26,533
12 761
28,125
10 349
22,809
11 087
24,436
153
34,496
19 885
43,825
3.10
4.05
2.61
3.41
2994
9'9"
2653
8'8"
1491
4'10"
2907
9'6"
90
3.5"
8393
27'7"
5517
18'2"
13 959
45'10"
11 899
26,227
12 621
27,816
10 210
22,504
10 947
24,127
152
34,217
19 993
44,063
3.30
4.32
2.78
3.64
2927
9'7"
2747
9'0"
1420
4'7"
2791
9'1"
90
3.5"
8265
27'2"
5561
18'3"
13 815
45'4"
11 952
26,342
12 676
27,938
10 267
22,629
11 006
24,259
148
33,277
19 929
43,922
3.30
4.32
2.78
3.64
2994
9'9"
2622
8'7"
1523
4'11"
2952
9'8"
90
3.5"
8438
27'9"
5561
18'3"
13 987
45'11"
11 812
26,034
12 535
27,627
10 127
22,321
10 865
23,948
146
32,999
20 037
44,160
3.40
4.45
2.92
3.82
2927
9'7"
2719
8'11"
1449
4'9"
2831
9'3"
90
3.5"
8305
27'3"
5600
18'5"
13 839
45'5"
11 881
26,186
12 607
27,786
10 199
22,480
10 941
24,114
143
32,256
19 967
44,006
3.40
4.45
2.92
3.82
2994
9'9"
2593
8'6"
1551
5'1"
2992
9'9"
90
3.5"
8478
27'10"
5600
18'5"
14 012
46'0"
11 740
25,876
12 465
27,474
10 059
22,171
10 799
23,802
142
31,979
20 075
44,244
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
29
Operating Specifications
Bucket Type
Edge Type
Capacity Rated ()
Capacity Struck ()
Width ()
Digging Depth ()
Overall Length
Breakout Force** ()
Operating Weight*
m3
yd3
m3
yd3
mm
ft/in
mm
ft/in
mm
ft/in
mm
ft/in
mm
in
mm
ft/in
mm
ft/in
mm
ft/in
kg
lb
kg
lb
kg
lb
kg
lb
kN
lb
kg
lb
Bolt-On
Edges
Teeth and
Segments
Bolt-On
Edges
3.60
4.71
3.10
4.05
2927
9'7"
2687
8'9"
1480
4'10"
2876
9'5"
90
3.5"
8350
27'5"
5643
18'7"
13 867
45'6"
11 798
26,004
12 526
27,608
10 122
22,309
10 864
23,946
138
31,176
20 007
44,094
3.60
4.71
3.10
4.05
2994
9'9"
2561
8'4"
1583
5'2"
3037
9'11"
90
3.5"
8523
28'0"
5643
18'7"
14 040
46'1"
11 657
25,693
12 383
27,293
9980
21,998
10 722
23,631
137
30,901
20 115
44,332
3.80
4.97
3.28
4.29
2927
9'7"
2651
8'8"
1517
4'11"
2927
9'7"
90
3.5"
8401
27'7"
5697
18'9"
13 898
45'8"
11 700
25,787
12 429
27,394
10 028
22,101
10 772
23,743
133
30,013
20 061
44,213
Auxiliary
High Lift Counterweight
Change in
Teeth and Change in
Specs
Specs
Segments
3.80
4.97
3.28
4.29
2994
9'9"
2525
8'3"
1619
5'3"
3088
10'1"
90
3.5"
8574
28'2"
5697
18'9"
14 073
46'3"
11 558
25,474
12 286
27,078
9886
21,788
10 629
23,426
132
29,739
20 169
44,451
505
1'7"
35
0'1"
374
1'2"
4
0.1"
604
2'0"
506
1'8"
393
1'4"
1279
2,820
1440
3,174
1190
2,622
1341
2,955
8
1,812
602
1,326
150
0'6"
1035
2,281
1109
2,445
854
1,883
933
2,057
499
1,100
* Static tipping loads and operating weights shown are based on a global machine configuration with Michelin 23.5R25 XHA2 L3 Radial
tires, full fluids, operator, standard counterweight, standard linkage, cold start, roading fenders, Product Link, open differential axles
(front/rear), power train guard, secondary steering, and sound suppression.
** Measured 102 mm (4") behind tip of cutting edge with bucket hinge pin as pivot point in accordance with SAE J732C.
*** Rock bucket specifications are given on Michelin 23.5R25 XLDD2 L5 Radial tires.
() Specifications and ratings conform to all applicable standards recommended by the Society of Automotive Engineers, including
SAEStandard J732C governing loader ratings.
(ISO) Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification between calculations and testing.
(Rigid Tire) Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
30
Material Density
kg/m3
700
800
900
1000
1100
1200
1300
1400
1500
1600
Pin On
Standard Linkage
Fusion QC
1,348
1,517
1,685
1,854
4,213
4,044
lb/yd3
Material Density
2500
2400
2300
2200
Material
Handling
2100
General
Purpose
2000
Heavy Duty
Material
Handling
1900
Material
Handling
1800
General
Purpose
1700
2,191
2,359
2,528
2,696
2,865
3,033
3,202
3,370
3,539
3,707
3,876
31
Material Density
kg/m3
700
800
900
1000
1100
1200
1300
1400
1500
Pin On
Fusion QC
32
lb/yd3
Material Density
1,348
1,517
1,685
4,213
4,044
3,876
3,707
Material
Handling
General
Purpose
2500
2400
2300
2200
2100
2000
1900
Heavy Duty
Material
Handling
1800
Material
Handling
1700
General
Purpose
1600
1,854
2,022
2,191
2,359
2,528
2,696
2,865
3,033
3,202
3,370
3,539
25-76 mm (1 to 3 in)
19 mm (0.75 in) and smaller
Rock
Note: Fill Factors achieved will also depend on whether the product is washed or not washed.
Change in Specifications
mm
2844
2797
2947
2813
2816
2947
2851
in
112
110
116
110
110
116
112
Change in
verticaldimensions
mm
31
2
4
0
27
5
2
in
1.2
0.1
0.2
0
1
0.2
0.1
Change in
operatingweight
kg
184
200
744
0
608
592
264
lb
406
441
1,640
0
1,340
1,305
582
Change in
statictippingload
kg
123
133
496
0
405
395
153
lb
271
293
1,093
0
893
871
337
33
Standard equipment may vary. Consult your Cat dealer for details.
POWER TRAIN
OPERATOR ENVIRONMENT
Brakes, full hydraulic enclosed wet-disc with
Air conditioner, heater, and defroster
(12-volt 10-amp)
Fuel Management System (FMS)
Camera, rearview
Fuel/water separator
Glow plugs
EH parking brake
Guard, vandalism
Instrumentation, gauges:
Radiator, unit core (6 fpi) with ATAAC
Fuel level
powershift (4F/4R)
Parking brake
Main disconnect switch
Horn, electric
Viscous mounts
34
TIRES
A tire must be selected from the mandatory
attachments section. Basemachine price
includes a tire allowance.
FLUIDS
Premixed 50% concentration of Extended
Life Coolant with freeze protection
to34C (29 F)
OTHER STANDARD EQUIPMENT
Auto idle shutdown
Couplings, Cat O-ring face seal
Ecology drains for engine, transmission,
andhydraulics
Ether aid
withextension
Filters:
Fuel, primary/secondary
Engine air, primary/secondary
Engine oil
Hydraulic oil
Transmission
Fuel cooler
Grease zerks
rearclamshell
Hoses, Cat XT
(adjustablein cab)
Linkage, optimized Z-bar
Oil sampling valves
Platform, window washing
Product Link
Remote, diagnostic pressure taps
Service center (electrical and hydraulic)
Sight gauges: engine coolant, hydraulic oil
and transmission oil level
Steering secondary
Toolbox
Optional equipment may vary. Consult your Cat dealer for details.
Power Train
Differentials
Open, front or rear
Limited slip, front or rear
Extreme temperature seals
Seal guards
Axle oil cooler 2V/3V
Axle oil cooler 4V
Hydraulics arrangement,
2V with ride control
Hydraulics arrangement,
3V with ride control
Hydraulics arrangement,
4V with ride control
Cold start/high altitude package (240V)
Comfort package
Work lighting package, halogen
Work lighting package, HID
Forestry package
Industrial package
Cab protection package
High lift, 2V
High lift, 3V
High lift, 4V
Fusion coupler
Fusion coupler ready, 2V
Fusion coupler ready, 3V/4V
Bucket and work tool options
(contactCatWork Tools)
Lights, signal LED
Product Link, satellite
Control, aggregate autodig
Command control 2V/3V
Command control 4V
Payload control system
Printer, payload CNTL system
Radio, AM/FM CD/MP3 player
Filter, carbon fresh air
35
For more complete information on Cat products, dealer services, and industry solutions,
visit us on the web at www.cat.com
2012 Caterpillar Inc.
All rights reserved
Materials and specifications are subject to change without notice. Featured machines in
photos may include additional equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, Caterpillar Yellow and
the Power Edge trade dress, as well as corporate and product identity used herein,
are trademarks of Caterpillar and may not be used without permission.
28
AEHQ6611 (02-2012)
EU Emissions Regulations)