Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 474 views

    Failure Code (DXA0KA) PC-EPC Sol Open Circuit: SEN01887-02 40 Troubleshooting

    Uploaded by

    ale ale
    This document provides troubleshooting information for a failure code related to an open circuit in the PC-EPC solenoid in the pump controller system. It lists the failure code and description, explains that no current is flowing to the solenoid circuit so it does not operate, and that engine speed may lower and stall under higher loads. Potential causes outlined include a defective solenoid, emergency drive switch, or wiring harness, and it provides the standard resistance values to check during troubleshooting. A circuit diagram is also included.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Failure Code (DXA0KA) PC-EPC Sol Open Circuit: SEN01887-02 40 Troubleshooting

    Uploaded by

    ale ale
    474 views2 pages
    This document provides troubleshooting information for a failure code related to an open circuit in the PC-EPC solenoid in the pump controller system. It lists the failure code and description, explains that no current is flowing to the solenoid circuit so it does not operate, and that engine speed may lower and stall under higher loads. Potential causes outlined include a defective solenoid, emergency drive switch, or wiring harness, and it provides the standard resistance values to check during troubleshooting. A circuit diagram is also included.

    Original Description:

    Original Title

    Falla PC 228UCL

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides troubleshooting information for a failure code related to an open circuit in the PC-EPC solenoid in the pump controller system. It lists the failure code and description, explains that no current is flowing to the solenoid circuit so it does not operate, and that engine speed may lower and stall under higher loads. Potential causes outlined include a defective solenoid, emergency drive switch, or wiring harness, and it provides the standard resistance values to check during troubleshooting. A circuit diagram is also included.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    474 views2 pages

    Failure Code (DXA0KA) PC-EPC Sol Open Circuit: SEN01887-02 40 Troubleshooting

    Uploaded by

    ale ale
    This document provides troubleshooting information for a failure code related to an open circuit in the PC-EPC solenoid in the pump controller system. It lists the failure code and description, explains that no current is flowing to the solenoid circuit so it does not operate, and that engine speed may lower and stall under higher loads. Potential causes outlined include a defective solenoid, emergency drive switch, or wiring harness, and it provides the standard resistance values to check during troubleshooting. A circuit diagram is also included.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    SEN01887-02 40 Troubleshooting

    Failure code [DXA0KA] PC-EPC Sol Open Circuit 1

    Action code Failure code PC-EPC solenoid disconnection


    Trouble
    E02 DXA0KA (Pump controller system)
    Contents of
    • No current flows to PC-EPC solenoid circuit.
    trouble
    Action of con- • None in particular. (Since no current flows, solenoid does not operate.)
    troller • If cause of failure disappears, system resets itself.
    Problem that
    appears on • If pump load increases, engine speed lowers largely and engine may stall.
    machine
    • Output to PC-EPC solenoid (current value) can be checked with monitoring function.
    (Code 01300: PC-EPC solenoid current)
    Related infor-
    • If solenoid and wiring harness are not defective, turn emergency drive switch on; the operator can
    mation
    operate the machine with output equivalent to E-mode. (Failure code [DXA0KA] is then displayed,
    but it is not defective.)

    Cause Standard value in normal state/Remarks on troubleshooting


    a Prepare with starting switch OFF, then carry out troubleshoot-
    Defective PC-EPC solenoid ing without turning starting switch ON.
    1
    (Internal disconnection) V11 (male) Resistance
    Between (1) – (2) 7 – 14 z
    a Prepare with starting switch OFF, then carry out troubleshoot-
    ing without turning starting switch ON.
    S25 Switch Resistance
    Defective emergency pump
    2 drive switch (Internal discon- OFF Max. 1 z
    Between (2) – (3)
    nection) ON Min. 1 Mz
    OFF Max. 1 z
    Between (5) – (6)
    ON Min. 1 Mz
    a Prepare with starting switch OFF, then carry out troubleshoot-
    ing without turning starting switch ON.
    Possible causes Wiring harness between CP03 (female) (16) Resis-
    Max. 1 z
    and standard Disconnection in wiring har- – S25 (3) tance
    value in normal ness Wiring harness between S25 (2) – A04 – V11 Resis-
    state Max. 1 z
    3 (Disconnection in wiring or (female) (1) tance
    defective contact in connec-
    Wiring harness between CP03 (female) (3),
    tor) Resis-
    (13), (23) – A04 – V19 (female) (2) – chassis Max. 1 z
    tance
    ground
    Wiring harness between S25 (5) – A04 – V11 Resis-
    Max. 1 z
    (female) (2) tance
    a Prepare with starting switch OFF, then turn starting switch ON
    and carry out troubleshooting.
    Hot short (Short circuit with Wiring harness between CP03 (female) (16)
    4 Voltage Max. 1 V
    24V circuit) in wiring harness – S25 (3) and chassis ground
    Wiring harness between S25 (2) – A04 – V11
    Voltage Max. 1 V
    (female) (1) and chassis ground
    a Prepare with starting switch OFF, then carry out troubleshoot-
    ing without turning starting switch ON.
    5 Defective pump controller
    CP03 (female) Resistance
    Between (16) – (3), (13), (23) 7 – 14 z

    30 PC228US, 228USLC-3E0
    40 Troubleshooting SEN01887-02

    Circuit diagram related to LS-EPC and PC-EPC solenoids of pump controller

    PC228US, 228USLC-3E0 31

    You might also like