Interior Furnishing Work of New Circle Office in Bank'S Own Building at Plot No. 4, PSP, Saket Nagar, Near Aiims Bhopal

INTERIOR FURNISHING WORK OF NEW CIRCLE OFFICE IN BANK’S OWN BUILDING AT PLOT NO.
4,
PSP, SAKET NAGAR, NEAR AIIMS BHOPAL
BOQ ( BILL OF QUANTITY ) IN CANARA BANK AT SAKET NAGAR , BHOPAL ( M.P.)

FIRST FLOOR PLAN
Product Specification
S.N Item
unit Qty/nos Rate Amount Code/ Images
O. Name
(A) INTERIOR WORK
1 Providing and installation of acoustical wall

panelling wood finish Slats made out of HDF
board , Melamine / veneer laminated finish,
perforated wooden grooved slats (2mm grooves
@ 8mm centers) / (2mm Slats @16mm pitch) /
(2mm grooves @ 32mm centers) / (2mm
grooves @ 64mm centers),
backlined with black acoustical fleece, tongue-
groove edge for a seamless look, FR grade, of
lineal dimension size 128mm x 2440mm x
16mm thick having density 1000Kg /m3, weight
12.8Kgs/m2 installed by using GI strut system.
The GI strut
system includes GI Cross channel having
thickness 0.45mm, length 3600mm, knurled web
40mm, depth 10mm and equal flanges 15mm is
fastened vertically/horizontally at every 600mm
centers. Aluminium core cross channel having
thickness 0.5mm, length 2400mm, web 15mm
and 27mm, depth 18mm and flanges of 7mm sqm. 103.00
with suitable edge and centre brackets is then
fixed perpendicular to the cross channel with the
help of fasteners at every 400mm centers.
Contractor to Provide expansion joints of 3mm
at every 5mts bothways.
2 Frosted sparking glass film:- Frosted sparkling

glass film: Providing and fixing frosted glass film
of approved make Translucent, cast PVC, self-
adhesive vinyl, special CRYSTALeffect film to
reproduce Sand-blasting effect on glass with
customised designs. MCS warranty of 3 (if
exposed to direct sunlight) to 10yrs (indoors)
must be endorsed by manufacturer. Rate shall
be inclusive plotter cutting design as per
Architect/consultant/SUDA suggestion. .work
complete incuding all type of tools, tackles, sqm. 39.00
scaffolding etc complete as per suggestion of
Architect/consultant/SUDA. If in case any
application finishing will not as per satisfaction
contractor shall remove all film at their cost.
Contractor shall do a sample mock of 5 Sqm
minimum of glass film) ,shall be approved from
Architect/consultant/SUDA.(static cling window
film)
3 GYPSUM FALSE CEILLING:-
The works include supply and installation &
fixing of Gypsum Board Ceiling which
Incorporates a fully concealed GI fixing grid of
ultra channel 18 guage. Complete with all
necessary hardware, fittings and accessories.
Board joints are not visible and all gaps are filled
with gypsum jointing compound like gypsum
powder . The job also includes providing access
panels, cutting of spot lights, luminaries,
speaker, etc. Sheets in size 4’ x 8’ in thickness
½” (or 3/8”) screwed on steel stud system. The
steel stud frame consisting of main furring GI
channel at every 600 mm and cross channel at
every 600 mm . SQM. 980.00
Both main and cross channels are attached
though jaw clip. Screws will be corrosion proof
either Chromites or Cynated. Screw fixing is
done mechanically with drilling machine &
suitable attachment. Finally the boards are to be
jointed & finished so as to have a flush look
which includes filling & finishing with jointing
compound, paper tape and two coats of top
coats of gyp board, etc completed.
The gaps will be initially filled with joining
gypsum plaster compound and then taped by
self adhesive covered with proper jointing
compound like gypsum powder.Contractor has
to provided all necessary cut outs for Electrical
4 LIGHT WEIGHT CALCIUM SILICATE
CEILLING: Providing and fixing ecofriendly light
weight calcium silicate false ceiling tiles having
Tegular edge & 15 mm Thick edges on the Tile
Periphery for Extra Strength The Light weight
calcium silicate ceiling tiles shall have , light
reflection 85% non-combustible as per B.S. 476
part IV, 100% humidity resistance and also
having thermal conductivity0.043° w/m KC.for
the best thermal Insulation . The Light weight
calcium Silicate tile shall be of approved texture
Fine fissured/ Spintone/Cosmos having NRC
value of 0.5 & Globe having NRC value of 0.75
NRC or equivalent of size 595 X 595 mm to be
laid on true horizontal level suspended inter
locking metal grid of hot dipped galvanized steel
sections (galvanizing @120 grams per sqm
including both side) consisting of main ‘T’ runner
suitably spaced at joints to get required length
and size of 24X38mm made from 0.30 mm thick
(minimum) sheet, 1200mm centre to centre, and
cross ‘T’ of size 24X28mm made out of 0.33mm
(Minimum) sheet spaced 1200mm along spaced
between main ‘T’ at 600mm centre to centre to
form
agrid of 1200X600mm and secondary cross ’T’
of length 600mm and size 24x28mm made of
0.30 mm thick (Minimum) sheet to be interlocked
at middle of the 1200X600mm panel to form grid
of size 600X600mm resting on periphery
walls/partitions on a perimeter wall angle pre-
coated steel of size (24X24X3000mm made of
0.40mm thick (minimum) sheet with the help of
rawl plugs at 450mm centre to centre with 25mm
long dry wall screws @ 230mm interval and
laying 15mm thick Densified edges light weight
calcium silicate ceiling tiles of approved texture
(Fine Fissured/Cosmos/Spintone) in the grid
including, cutting /making opening for services
like diffusers, grills, light fittings, fixtures, smoke sqm. 489.00
detectors etc., wherever required, Main ‘T’
runners to be suspended from ceiling using G.I.
slotted cleats of size 25X35X1.6mm fixed to
ceiling with 12.5mm dia and 50mm long dash
fasteners, 4mm G.I. adjustable rods with
galvanized steel level clips of size
85X30X0.8mm, spaced at 1200mm centre to
centre long main ‘T’ bottom exposed with 24mm
of all Tsections shall be pre-painted with
polyester baked paint, for all heights, as per
specifications, drawings and as directed by
engineer-in-charge.
5 FLUSH PARTITION (laminate finish) :
Providing & fixing flush partition up to false
ceiling ht (thickness of partition is 70 mm) having
09 mm thick mr grade BWP plywood IS 303 both
side on aluminum framing. Aluminum framing
having 16 guage and size for vertical &
horizontal support is 50 mm x 25 mm. Verical
sction to be properly fixed to floors as required.
All exposed surfaces finished with 1 mm thick
laminate of approved shade without any air gap
and grooving as per design. Necessary framing
to be erected above false ceiling. No extra cost
to be paid for the same. Before installation,
make hole/face plate for conduit pipes of sqm. 245.00
electrical / networking cables with open able
stud from partitionIncluding all materials and
labor etc. Make necessary grooves as per
shown in
drawing. All bottom ends are covered with
burma border bidding Patti finishedwith laminate
Complete with all necessary hardware &
adhesives as per details given in drawing and as
per instructions of
Architect/consultant/Engineer In charge.
Contractor has to provide all
necessary cut outs (race ways.) for Electrical
works & no extra payment shall be made for it.
6 LAMINATE WALL PANELING:
Providing & fixing wall paneling having
suggested aluminum grid of
37mm x 37mm or 50mmx 25 mm framing
(whichever requires.)Having 16 guage) of size
600 mm x600 mm by aluminium sections of
given size. Grid frame is covered with 09 mm
thick mr grade BWP plywood. To create
suggested groove & neices. All grooves are
finished with laminate. All exposed surfaces
covered with 1 mm thick laminates of approved sqm. 157.49
shade as instructed by
Complete with all hardwares like s nails, ss
screws, adhesives etc. shown in detail drawings.
Contractor has to
provide all necessary cut outs for Electrical
works & no extra payment shall be made for it.
Amount shall be paid only for the Paneling
between the FalseCeiling & Flooring.(
7 VINEER WALL PANELING:
Providing & Fixing wall paneling having
aluminum grid framing (50x25 or 37x37mm
having16 gauge) of size 600 mm x600 mm by
aluminum sections of said size. Grid frame is
covered with 9 mm thick mr grade BWP plywood
paneling to create suggested nieces &
suggested grooves. Use of SS patties of
suggested sizes on wall as per given pattern. All
grooves are finished with 4 mm thick veneer
finish with pu mat polish. All exposed surfaces
covered with 4 mm thick vineer of approved sqm. 80.00
shade complete with PU polish as instructed by
Complete with all hardwares like s nails, ss
screws, adhesives etc. shown in detail drawings.
Contractor has to provide all necessary cut outs
for Electrical works & no extra payment shall be
made for it. Amount shall be paid only for the
Partition between the False Ceiling & Flooring.
8 FULL HEIGHT PARTLY GLAZED PARTITION
UP TO FALSE CEILLING (LAMINATE
FINISH)L:- Providing & Fixing both side
laminated partly glazed partition up to false
ceiling ht (thickness of partition is 70 mm) having
09 mm thick MR grade BWP plywood both side
on aluminum framing . Aluminum framing size
for vertical & horizontal support is 50 mm x 25
mm having guage of 16.. Grid of aluminum
framing is 600 mm x 600 mm. Exposed framing
made with peripherial 3" ply patta .and centrally
having 10 mm thk plain glass provision with
suggested frosted film
(plane/colorful) All exposed surfaces of one side sqm. 174.00
finished with 1 mm
thick laminate of approved shade. Make
necessary grooves as per
shown in drawing. Necessary framing to be
erected above false ceiling (up to beam and slab
height.) No extra cost to be paid for the same.
Before installation, make hole/face plate for
conduit pipes of electrical / networking cables
with open able stud from partition Including all
materials and labor etc. For glazing using of 10
mm thick clear glass with proper crystal edges &
with suggested frosted films on glass. All joints
are covered with burma border bidding Patti
finished with laminate/veneer as per actual site
9 FULL HT FLUSH PARTITONS UP TO FALSE
CEILLING (ONE SIDE
LAMINATE ONE SIDE VENEER FINISH )):-
Providing & Fixing One side laminated & one
side veneer flush partition up to false ceiling
ht
(thickness of partition is 73 mm) having 09
mm thick MR grade BWP
plywood both side on aluminum framing .
Aluminum framing size for
vertical & horizontal support is 50 mm x 25
mm having guage of 16..
Grid of aluminum framing is 600 mm x 600
mm. All exposed surfaces of one side
sqm. 123.00
finished with 1 mm thick laminate & at
another side finished with 4 mm veneer
complete with PU mat polish spray polish of
approved shade. Make necessary grooves as
per shown in drawing. Necessary framing to
be erected above false ceiling (up to beam
and slab height.) No extra cost to be paid for
the same. Before installation, make hole/face
plate for conduit pipes of electrical /
networking cables with open able stud from
partition Including all materials and labor etc.
All joints are covered with burma border
bidding Patti finished with laminate/veneer
as per actual site finish. Complete with all
10 LOW HT PARTLY GLAZED PARTITION UPTO
1.35 MT HT:
Providing & Fixing partly laminated & partly
glazed partition up to 1.35
m ht (thickness of partition is 70 mm) having 09
mm thick MR BWP grade
plywood is 303 grade both side of aluminum
framing of gauge 16
Aluminum framing size for each support is 50
mm x 25 mm. having grid of 600 mm x 600 mm.
Finished with 1 mm thick laminate at all exposed
surfaces of approved shade. Make necessary
grooves as per shown in drawing. Using of 10
mm thick clear glass with proper crystal edges. sqm. 388.00
Using of 10 mm thick toughen clear glass with
proper crystal edges & with suggested frosted
films/color films on glass. Glass starts from 1.00
mt lvl . All joints are covered with Burma border
bidding Patti finished with Laminate/polish.
Complete with all necessary hardware &
adhesives as per details given in drawing and as
per instructions of Architect/consultant/Engineer
In charge. Contractor has to provide all
necessary cut outs for Electrical works & no
extra payment shall be madefor it.
11 FULL HEIGHT PARTLY GLAZED DOOR WITH
PHERIPHERIAL LAMINATE PLY FRAMING
COMPLETE WITH ALL HARDWARES
Specification:- Providing material & labour
charge for making partly Glazed Door with
pheripherial ply framing based on aluminium
framing of size 900 mm x 2225 mm average size
having 8 mm THICK extra clear glass with
crystle edges & frosted effects in middle of the
door width and 1.2 mtr above floor level . All
complete with hole ,cut work etc. with hydraulic
door closer . Pheripherial frame make with 09 sqm. 34.00
mm MR BWP grade ply finished with 1 mm thk
suggested shed laminate based on 50mm x25
mm aluminium section (16 guage) Complete
with all necessary nhardwares like 150 mm hight
handles, locks/Conceal Mortise Locks 3 keys,
door stopper etc as per details given in drawing
and as per instructions of Architect/Engineer In
charge.
12 SINGLE LEAF FLUSH DOOR (ONE SIDE
VENEER FINISH AND ONE SIDE LAMINATE
FINISH ):-
Specification:- Providing Material & Labour
charge for making Flush Door (finished size of
door is 61 mm) of size 900 mm x 2250 mm
considering blockboard flush door sheet of 35
mm thickness covered both side by 4 mm mr
grade ply & finished with 1 mm thick laminate of
suggested shed at single side and 4 mm veneer
another side complete with pu spray polish on
sides of shutters fixed with appropriate burma
border patti , complete with pu polish. Finishing SQM. 6.50
with all necessary hardwares like SS handles
150mm height as suggested ,conceal mortise
locks, cylinders with 3 nos of keys ,
stopers,tower bolt,MS nails, SS-304 screws,
hydraulic door closer, door dtopper etc. as per
details given in drawing and as per instructions
of Architect/Engineer In charge. Please see the
Attached Make List for Apporoved Makes.
14 SINGLE LEAF FLUSH DOOR (BOTH SIDE
LAMINATE FINISH ):-
Specification:- Providing Material & Labour
charge for making Flush Door (finished size of
door is 61 mm) of size 900 mm x 2250 mm
considering blockboard flush door sheet of 35
mm thickness covered both side by 4 mm mr
grade ply & finished with 1 mm thick laminate of
suggested shades on both sides of shutters
fixed with appropriate burma border patti ,
complete. Finishing with all necessary SQM 4.18
hardwares like SS handles 5 inches height as
suggested ,conceal mortise locks, cylinders with
6 nos of keys , stopers,tower bolt,MS nails, SS-
304 screws, door stopper, hydraulic door closer
etc. as per details given in drawing and as per
instructions of Architect/Engineer In charge.
Please see the Attached Make List for
Apporoved Makes.
15 Providing and fixing stainless steel English

(Capital) and Hindi letters in standard pattern
bellow type made with 1.20 mm thick stainless
steel (ASI Grade-304) Jindal or equivalent.
Depth of letter shall not be less than 30mm and
rate includes welding/soldering of joints
c.m. 2000.00
polishing, buffing and fixing on the wall beam
surface at any height with necessary nut and
bolts/fasterner wherever is required complete as
per direction of Engineer-in-charge.
16 Providing and fixing of name plate for offices
name of Stainless steel plate 304 grade of
1.50mm thick, including writing with
computerized vinayle sheet letters of required
sq.m. 5.50
size including fixing at required placed with
studs, screws and rawl plugs etc. compete as
per direction of engineer incharge.
17 Providing and fixing Stainless steel plate

304grade of 1.50mm thick, including writing with
Embossing of letters of required size including
fixing at required placed with studs, screws and
rawl plugs etc. compete as per direction of
engineer-in-charge.
sq.m. 1.10
Providing & fixing of imported 3D wall paper with

high resolution including all fitting with wastage sq.m. 38.00
18
19 Providing and fixing painting work made out of

canvass by acrylic /oil paint colours as per
design with framing work etc. complete in all
respect as per direction given by Engineer in
charge.
sqm 14.5
20 ROLLER BLINDS:- Providing and fixing of roller

blinds of washable fabric duly fixed with powder
coated channel and clamps having nylon code
sq.m. 360
for operation of approved color etc. complete in
all respect as per direction given by Engineer in
charge.
21 Planters - 450 x 450 x 400 - Providing and fixing

planters made up of 19mm BWR ply finished
with 1.0mm laminate as per drawing detail. Al
nos. 10.00
exposed edges to finished with LW beading
which is polished. All inside surfcaces to be
painted.
22 Providing and fixing Planters with plants big
size of width 500 mm , depth 500 mm and height
each 12.00
1100 mm as per selected design detail.
Company - Avira
23 Providing and fixing of 12mm. Thick soft board

for display in partition etc. complete in all
sqm. 17.00
respect as per drawing and direction given by
Engineer in charge.
24 Texure Paint : Texture paint (Insider and

outside) :Wall/ Ceiling
painting two coats (1 base plus 1 texture) with
low VOC as per
approved brand in any shades and colour as
directed on wall surface to give an even shade
including applying coat of putty, Penetrating
primer or equivalent and two coats of paint,
scaffolding to at any height with all labour and
material thoroughly brushing the surface free
from mortar droppings and other foreign matter
and sand prepared smooth etc. complete. The
substrate must be sound, clean, dry, free from
dust, oil, grease and laitance etc. All traces of sq.m. 70.00
release agents must be removed. On chalky and
dusty surfaces, all loose material must be
removed by stiff bristle brushing. The primer/
paint application is to be done with the rollers.
Rate shall be including crack filling and levelling
as per manufacturers specfication. Top coat
should have. 1) Low VOC content. 2) Crack
Bridging ability upto 2.6 mm. 3) 100% pure
acrylic emulsion. 4) Anti-Carbonation concrete
protection. 5) Very Low Flame spread. 6)
Superior Washability.
25 Wall painting (two coats) with Emulsion paint of
approved brand and
manufacture on undecorated wall surface to give
an even shade
sq.m. 70.00
including throughly brushing the surface free
from mortar droppings
and other foreign matter and sand papered
smooth..
26 Providing & fixing EURO pratik products of

DECORIS series/CASA Series/3D wall art/
Designer wave board on 8mm thick ply on
framework 50mmx50mm thick sal wood
sq.m. 38.00
sections/second grade TW, placed at 600mm
c/c in both the directions as per detail drawings.
As directed by engineer in charge and architect.
27 GLASS TOP ON TABLE FINISH TOP:-

Providing & fixing 12 mm thick clear anealed
glass on top on laminate finish table rest on
vaccumes as requires . Glass have bewel edjes.
Fitting as per details given in drawing and as per
sqm. 49.00
instructions of Architect/consultant/Engineer In
charge. Contractor has to provided all necessary
cut outs (race ways.) for Electrical works & no
extra payment shall be made for it.
28 Designing, Providing and fixing LOGO-
RECEPTION BACKDROP - Reception/Main
lobby Signage (Backdrop) - Providing and fixing
Backdrop in laminate finish with Stainless steel
strips inlay with Stainless steel coloured sheet
316 grade 1.5 mm thick LOGO as required and
shown in attched photograph/ drg. Backdrop to
each 10.00
have logo in Vinyl (same colours as specified in
logo). The Stainless steel sheet to be backed
with Marine ply backing. Proper Teak wood
lipping to be provided at all exposed edges
finished in melamine matt polish.
29 SS PULL/PUSH SET - Providing and fixing

Stainless Steel Finish signages set on glass
doors with with 3M double sided tape & letters
each 9.00
with silk screen printing technology over all size
of pictogram to be 50x150mm. 2mm thick SS
316 grade
30 SS 304 MAT FINISH DIRECTION SIGN
Providing & Fixing signage on 1 mm SS 304 mat
finish 0.8mm- 1 mm with 5 mm black acrylic
direct pasting with silicon tape on any surface
expect un finished wall (18"x4"=72 sq inch for
each ) (as per the approved size & shade )
including fixing by using necessary hardwares
(Fixing/bonding on wall /ply wherever it requires
nos. 10.00
with its proper silicon pasting /studs
,screws,nails etc). completely with printing in
suggested colors for each cabin/Utilities area
above each door/wood surfaces/wall surfaces
Before making the letters the font & size will be
got
approved from authority .
31 SUGGESTION BOX :- P/F in position of
suggetion box made out of 19mm thick
approved board with 1mm thick laminate(as
approved) on all exposed surfaces and T.W
lipping duly melamine polished etc. complete. nos. 4
The item shall also include locking arrangement
and other required hard ware etc.complete
internal surfaces of the box shall be painted
with enamel paint.
TOTAL INTERIOR WORK
(B) FURNITURE WORK

FIRST FLOOR
Supplying and placing in position Conference
table of the following specifications. Conference
Table With Access Flap ,Oveall size shall
9600mm x2400mm x750mm.The top shall be 55
mm thick 25 mm + 25 mm + 0.8 mm Balancer
Laminate + 4 mm Veneer ) In Understructure the
Legs shall be made from 18 mm thick MDF + 4
CONFERE mm Veneer Both side having a straight profile .
NCE The modesty panel in understructure shall be Nos. 1
TABLE 18 mm thick MDF + 4 mm Veneer Both side
having a straight profile . There shall be Wire
Management wire carrier shall be made from 0.7
mm thick CRCA painted and carrier,8 mm Thick
Frosted Glass Provided in the Center of
Conferance table. Venner Finished with
Melamine Polish.
Medium Back Chair Pu Adjustable A Nylon
Base And CastNylon Back with cushion
Fabric.Gas Lift ( BIFMA Class - 3 ) For Height
Adjustment. High density molded PU seat foam.
Push Back Mechanism
CHAIR
Nos. 90
MID BACK
G.F. NYLON STRUCTURE WITH WIRE MESH

ON BACK HIGH DENSITY CUSHION ON SEAT
ADJUSTABLE ARMS WITH PU PADS
HIGH SYNCHRO TILT
BACK WITH MULTI LOCKING MECHNSIM AND SEAT
CHAIR SLIDER GASLIFT FOR HIEGTH ADJUSTMENT Nos. 6
WITH 5 PRONG ALUMINUM BASE WITH 60 MM
MESH CASTORS
Providing And Placing of Upbeat Executive Main

Table- 1500 x 750 x 750 with Side Table- 900 x
450 x 750. : Work Surface: Worktop shall be
made of 25MM
STAFF of 25mm thick MDF Board all open Edge
TABLE Covered with 2 mm Thick PVC Edge Band &
WITH Understructure Made of Rectangular Tube of Nos. 11
SIDE Size OD 50X25x1.2 mm.Complete metal
understructure will bePowder Coated after 11
STORAGE
TANK Pretreatment.overall product as
Overall Size- L1500xW750 Top made of 25mm
thick MDF . Visible Edge Covered with 2mm
PVC edge Band and Unvisible Edge covered
with 0.8mm Thick PVC Edge Band whenever its
required..Overall Size- METAL KEY BOARD
TRAY WITH MOUSE TRAY & CPU TROLLEY
WITH CASTORS with
1500xHeight1200xThickness. The 60mm
Aluminium modular partition shall be panel
based made of MDF panel / White writing board
WORK panel / Fabric board panel. The pre laminated
4 Nos. 20
STATION MDF board panel shall be made of 9mm thick
OSL MDF with required frame & fitting .The
white writing board panel shall be made of 9mm
white board with required frame and fitting.
Fabric board panel shall be made of 9mm MDF
covered with fabric. Soft board shall also used
wherever required. Fabric as per
approval.Aluminium Finish-Powder Coated
Overall Size- L1450xW600 Modesty made of
25mm thick MDF . Visible Edge Covered with
2mm PVC edge Band and Unvisible Edge
covered with 0.8mm Thick PVC Edge Band
Medium Back Chair. Pu Adjustable Arms. Nylon
Base And Casters.Nylon Back with cushion
Fabric. Gas Lift ( BIFMA Class - 3 ) For Height
( Push Back Mechanism.
MED
BACK Nos. 31
CHAIR
Table top & Gable Made from 50mm Thick MDF

and modesty made from 18mm Thick MDF All
open Edge Covered with 2 MM Thick PVC Edge
Band and non Visible edge covered with 0.8mm
thick pvc edge Band.Table top Corner Made
SIZE-1800Wx900Dx750H mm side storage
TABLE Size:- 1200WX450DX750H all panel Made from
18mm Thick MDF Board All open Edge Nos. 4
CABIN
Covered with 2 MM Thick PVC Edge Band and
non Visible edge covered with 0.8mm thick pvc
edge Band. Pedastel Made of 18mm Thick
MDF All open Edge Covered with 2 MM Thick
PVC Edge Band and non Visible edge covered
with 0.8mm thick pvc edge Band.
Back storage Top made of 25mm Thick MDF
.Rest of the panel Made from 18mm Thick MDF
. All open Edge Covered with 2 MM Thick PVC
BACK Edge Band and non Visible edge covered with
STORAGE 0.8mm thick pvc edge Band.Glass 4mm thick. Nos. 4
CABIN
Main Table -Size - (LXWXH) 2400 X 1200 X 750
mm - Side Unit 1800L X 600W x 650H Back Unit
2400 W X 750 H X 450 D (Supply and fixing in
position) Table Top to be made of 50 mm thick
plain ISI Mark MDF Board.Outer exposed face
of table to be finished with 4 mm thk veneer (of
PREMIUM reputated brand) 4 mm mdf board (Reputated
TABLE Brand.) where Melamine polish to be done as
SIDE AND per Requirement. All exposed veneer surface to
Nos. 1
BACK be polished with Matte finish melamine polish
UNIT GM (MRF/Asian paints or Eq.) and exposed mdf
CABIN board surface to be finished with Melamine
polish All inner exposed Board to be finished
with 1mm laminate (of reputated Brand.)
matching with the veneer polish..Handle free
drawer (Push Open) .Push open Telescopic
channels
High Back Chair Crome Finish Arms, Foam

Covered.Crome Base And Nylon Casters.
Gas Lift ( BIFMA Class - 3 ) For Height
Adjustment. High Density PU Seat & Back. Knee
Tilt Mechanism Rexine As Per Catelogue.
HIGH
7 BACK Nos. 1
CHAIR
High Back Chair.Crome Finish Arms, Foam
Covered. Crome Base And Nylon Casters.Gas
Lift ( BIFMA Class - 3 ) For Height
Adjustment.High Density PU Seat &
Back.Torsion Bar Mechanism. Rexine As Per
CHAIR Catelogue
8 HIGH Nos. 4
BACK
Medium Back Chair. PP Arms. Crome Base And

PP Casters. Net Back.
Center Tilt Mechanism
CHAIR
9 MID BACK Nos. 24
VISITOR
Specification- Size-H-870 mm, L-1940 mm, D-

840 mm. Structure made of treated agro wood,
fitted with 50mm wide rubberized belts 50mm
wide with high density PU foam as per design,
Upholstered with premium quality PU cloth with
SOFA 3 help of stitching, where ever necessary.
10 Nos. 1
SEETER Tapestry- 06 Mtr.
Specification- Size-H-870 mm, L-925 mm, D-840
mm. Structure made of treated agro wood, fitted
with 50mm wide rubberized belts 50mm wide
with high density PU foam as per design,
SOFA 1 Upholstered with premium quality PU cloth with
11 help of stitching, where ever necessary.Tapestry- Nos. 2
SEETER
04 Mtr
Providing And Placing of Sofa Single Seater

Recliner : The Recliner should be made of
Rubber Wood and 24 Density foam + Pocket
Spring (49 Nos. of Dia 50 mm / seat) Spring Rod
Dia =1.6 mm+ 24 density foam., upholstered
Sofa
with PVC upholstery (1 mm thickness, Weight –
Single
GSM - 575) in black color. The Slabstock foam Nos. 1
Seater
used has to be soft for comfort seating. Seat
Recliner
Foam should be32kg/m3 mm with density of 28
Kg/M3. Back Foam thickness to be 45 mm with
density of 28 Kg/M3. Webbing material shall be
nylone thread of 2mm Legs MSL Angle +
Leveling bush size: 83.0 cm (W)
Providing And Placing of Center Table consist of
under frame made of rubber wood and top is of
high density plywood. The top of both the tables
are 24 mm thick and have a higher load bearing
Center capacity than glass top. The matching curved
12 Nos. 1
Table leg evokes a premium look which adds to the
aesthetics. Load bearing capacity : 30 Kg overall
dimensions 1200W x 600D x 430H:
Providing And Placing of CORNER TABLE :
Corner Table consist of under frame made of
rubber wood and top is of high density plywood.
The top of both the tables are 24 mm thick and
have a higher load bearing capacity than glass
Corner top. The matching curved leg evokes a
13 Nos. 2
Table premium look which adds to the aesthetics.
Load bearing capacity : 30 Kg overall
dimensions 600W x 600D x 480H.
2 Bay With Drive Unit.Overall Size-

1830Wx1980Hx1830Dmm Body Made of
CRCA sheets 0.8 mm for Door, side & sheles &
0.7mm for back. Four No. of shelves: fo five
COMPAC compartments. Suitable arrangement shall be
14 TOR MAIN provided for adjusting the shelves as per Nos. 1
UNIT requirementFinish: Almirah shall be powder
coated after 11 tanks anti corrosion
pretreatment.

made of 25MM of 25mm thick MDF Board all
open Edge Covered with 2 mm Thick PVC Edge
TABLW Band & Understructure Made of Rectangular
WITH Tube of Size OD 50X25x1.2 mm.Complete Nos. 1
SIDE UNIT metal understructure will be Powder Coated
after 11 TANK Pretreatment.overall product as
PP Casters.
Net Back. Gas Lift ( BIFMA Class - 3 ) For
Height Adjustment.
High density molded PU seat foam. Center Tilt
Mechanism
CHAIR Nos. 2
Size:- Height:1500 mm, Width:900 mm,

Depth:450mm ( 4 door), Body part made-up of
prime quality "cold rolled close annealed" Sheet
of 1mm & 0.8mm thickness, Knockdown
constructions, Individualcompartment having
individual door, with 4 multipurpose lock. Holes
are provided in doors for ventilation. Doors are
15 storage mounted on Pivot with steel handle. All steel Nos. 5
components are epoxy powder coated followed
by seven tanks anti corrosion treatment of
surface.
3 Seater Visitor Sofa- 1.2 mm Thickness

Perforated Cold-Rolled Steel, Powder Coated ..
VISITOR CENTER BEAM - 2 mm Thickness Cold-Rolled
SOFA Steel, Powder Coated.. ARM & LEG - 1.2 mm
1 Thickness Cold-Rolled Steel, Powder Coate Nos. 5
WITH
CUSHION
SECOND FLOOR
800mmx 2400mmx750mm.The top shall be 55
Legs shall be made from 18 mm thick MDF + 4
mm Veneer Both side having a straight profile .
The modesty panel in understructure shall be
18 mm thick MDF + 4 mm Veneer Both side
CONFERE
NCE
1 mm thick CRCA painted and carrier,8 mm Thick Nos. 1
TABLE
MINI Conferance table. Venner Finished with
Melamine Polish.

CHAIR Push Back Mechanism
2 Nos. 15
MID BACK
WITH CASTORS with
panel / Fabric board panel. The pre laminated
WORK MDF board panel shall be made of 9mm thick
4 Nos. 29
STATION OSL MDF with required frame & fitting .The
white board with required frame and fitting.
whenever its required..Overall Size- L750xW715
made of 25MM of 25mm thick MDF Board all
Band &
Understructure Made of Rectangular Tube of
STAFF Size OD 50X25x1.2 mm.Complete metal
TABLE understructure will be Powder Coated after 11
WITH Tank Pretreatment.overall product as Nos. 13
SIDE
STORAGE

MEDIUM ( Push Back Mechanism.
BACK Nos. 42
CHAIR
PP Casters. Net Back. Gas Lift ( BIFMA Class -
3 ) For Height Adjustment. High density molded
PU seat foam. Center Tilt Mechanism
CHAIR
9 MID BACK Nos. 20
VISITOR

Size:- 1200WX450DX750H all panel Made from
18mm Thick MDF Board All open Edge
5 TABLE Covered with 2 MM Thick PVC Edge Band and Nos. 4
Edge Band and non Visible edge covered with
0.8mm thick pvc edge Band.Glass 4mm thick.
BACK
Nos. 4
STORAGE

Adjustment.High Density PU Seat & Back.
Torsion Bar Mechanism. Rexine As Per
CHAIR Catelogue
8 HIGH Nos. 4
BACK

provided for adjusting the shelves as per
14 TOR MAIN Nos. 1
requirementFinish: Almirah shall be powder
UNIT
pretreatment.
THIRD FLOOR
800mmx2400mmx750mm.The top shall be 55
CONFERE Legs shall be made from 18 mm thick MDF + 4
NCE mm Veneer Both side having a straight profile .
1 Nos. 1
TABLE The modesty panel in understructure shall be
MINI 18 mm thick MDF + 4 mm Veneer Both side
mm thick CRCA painted and carrier,8 mm Thick
Conferance table. Venner Finished with
Melamine Polish.
Push Back Mechanism
CHAIR
2 Nos. 15
MID BACK
WITH CASTORS with
panel / Fabric board panel. The pre laminated
MDF board panel shall be made of 9mm thick
OSL MDF with required frame & fitting .The
WORK
4 white board with required frame and fitting. Nos. 28
STATION
whenever its required..Overall Size- L750xW715
Gable End made of 25mm thick MDF . Visible
Edge Covered with 2mm PVC edge Band
andUnvisible Edge covered with 0.8mmThick
PVC Edge Band whenever its required..
made of 25MM 25mm thick MDF Board all
Band &
STAFF Understructure Made of Rectangular Tube of
TABLE Size OD 50X25x1.2 mm.Complete metal
WITH understructure will be Powder Coated after 11 Nos. 10
SIDE TANK Pretreatment.overall product as
STORAGE

MEDIUM ( Push Back Mechanism)
BACK Nos. 38
CHAIR

PP Casters. Net Back.
Center Tilt Mechanism
CHAIR
9 MID BACK Nos. 24
VISITOR
Size:- 1200WX450DX750H all panel Made from
5 TABLE Nos. 4
18mm Thick MDF Board All open Edge
Covered with 2 MM Thick PVC Edge Band and
Edge Band and non Visible edge covered with
BACK 0.8mm thick pvc edge Band.Glass 4mm thick.
Nos. 4
STORAGE

Adjustment.High Density PU Seat &
CHAIR Back.Torsion Bar Mechanism. Rexine As Per
HIGH Catelogue Nos. 4
BACK
Specification- Size-H-870 mm, L-1940 mm, D-
840 mm. Structure made of treated agro wood,
fitted with 50mm wide rubberized belts 50mm
wide with high density PU foam as per design,
SOFA 3 Upholstered with premium quality PU cloth with
Nos. 2
SEETER help of stitching, where ever necessary.Tapestry-
06 Mtr.
Providing And Placing of Center Table Centre

Table consist of under frame made of rubber
wood and top is of high density plywood. The top
of both the tables are 24 mm thick and have a
Center higher load bearing capacity than glass top. The
12 matching curved leg evokes a premium look Nos. 1
Table
which adds to the aesthetics. Load bearing
capacity : 30 Kg overall dimensions 1200W x
600D x 430H:

14 TOR MAIN provided for adjusting the shelves as per Nos. 1
UNIT requirementFinish: Almirah shall be powder
pretreatment.
TOTAL FURNITURE WORK
TOTAL INTERIOR AND FURNITURE WORK 0.00

Interior Furnishing Work of New Circle Office in Bank'S Own Building at Plot No. 4, PSP, Saket Nagar, Near Aiims Bhopal

Uploaded by

Copyright:

Available Formats

Interior Furnishing Work of New Circle Office in Bank'S Own Building at Plot No. 4, PSP, Saket Nagar, Near Aiims Bhopal

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Interior Furnishing Work of New Circle Office in Bank'S Own Building at Plot No. 4, PSP, Saket Nagar, Near Aiims Bhopal

Uploaded by

Copyright:

Available Formats

INTERIOR FURNISHING WORK OF NEW CIRCLE OFFICE IN BANK’S OWN BUILDING AT PLOT NO.

BOQ ( BILL OF QUANTITY ) IN CANARA BANK AT SAKET NAGAR , BHOPAL ( M.P.)

1 Providing and installation of acoustical wall

2 Frosted sparking glass film:- Frosted sparkling

15 Providing and fixing stainless steel English

17 Providing and fixing Stainless steel plate

Providing & fixing of imported 3D wall paper with

19 Providing and fixing painting work made out of

20 ROLLER BLINDS:- Providing and fixing of roller

21 Planters - 450 x 450 x 400 - Providing and fixing

23 Providing and fixing of 12mm. Thick soft board

24 Texure Paint : Texture paint (Insider and

26 Providing & fixing EURO pratik products of

27 GLASS TOP ON TABLE FINISH TOP:-

29 SS PULL/PUSH SET - Providing and fixing

TOTAL INTERIOR WORK

(B) FURNITURE WORK

G.F. NYLON STRUCTURE WITH WIRE MESH

Providing And Placing of Upbeat Executive Main

Table top & Gable Made from 50mm Thick MDF

High Back Chair Crome Finish Arms, Foam

Medium Back Chair. PP Arms. Crome Base And

Specification- Size-H-870 mm, L-1940 mm, D-

Providing And Placing of Sofa Single Seater

2 Bay With Drive Unit.Overall Size-

Providing And Placing of Upbeat Executive Main

Size:- Height:1500 mm, Width:900 mm,

3 Seater Visitor Sofa- 1.2 mm Thickness

Medium Back Chair Pu Adjustable A Nylon

Medium Back Chair. Pu Adjustable Arms. Nylon

Table top & Gable Made from 50mm Thick MDF

High Back Chair.Crome Finish Arms, Foam

2 Bay With Drive Unit.Overall Size-

Medium Back Chair. Pu Adjustable Arms. Nylon

Medium Back Chair. PP Arms. Crome Base And

High Back Chair.Crome Finish Arms, Foam

Providing And Placing of Center Table Centre

2 Bay With Drive Unit.Overall Size-

TOTAL FURNITURE WORK

TOTAL INTERIOR AND FURNITURE WORK 0.00

You might also like