Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

A350 Flight Factor

Download as pdf or txt
Download as pdf or txt
You are on page 1of 22

Firefox https://www.flightfactor.aero/review/A350.

html

Commercial Aircraft Review

FlightFactor / QPAC Airbus A350-900

Publisher / Developer: X-Plane.Org / FlightFactor


Description: Realistic representation of the Airbus A350-900
Software Source / Size: Download / approx. 700MB
Flight Simulator: X-Plane
Reviewed by: Angelique van Campen
Published: December 2nd, 2014

Computer / Software Specifications


Computer System: - iMac 27" 3.5Ghz Late 2013
- Intel i7 3.5Ghz / 3.9Ghz during Boost Mode
- NVIDIA GeForce GTX 780M 4096 MB
- 32 GB 1600 MHz DDR3
- Internal 1TB SSD
- Saitek Pro Flight System
Software: - Mac OS X 10.10.1
- Flight Simulator X Acceleration
- Prepar3D Version 2.2
- X-Plane 10.30

The Flight Factor aero Airbus A350


FlightFactor aero that comes with an Airbus? Yes, you're right and even I was quite surprised with this news. Till now Flight Factor produced
the Boeing 777 and the 757. Both are X-Plane models with high standards, but the sudden chance to fly an Airbus A350 is something special.
It is also special because at the time of this writing, October 2014, the A350 may fly already, but there are still no airlines that operate it.
Those A350 aircraft flying around are only aircraft from Airbus itself.

1 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

Nevertheless, the Airbus A350 is different from a Boeing 787 and every Airbus has also a different philosophy than Boeing aircraft. How an
aircraft flies, that's not really different; how the autopilot, autothrottle or autoflight works is basically the same, but the philosophy of how to
implement it does differ.

The modeled Flight factor aero A350 is actually an Airbus A350-900 Series and according to Flight Factor lead developer Roman aka
Ramzzess, this first A350 package will cover the A350 XWB Advanced version. According to Flight Factor the Advanced version is "a new
product line which we offer X-Plane users to give you the opportunity to experience the full range of capabilities of the real plane without the
need to invest too much time into learning the systems.

The idea behind the advanced model is to give inexperienced users the opportunity to fly a complex plane right away. Basically the advanced
model is the same as Professional, but with emergency procedures, failures and some system interworking being removed. Also, the
navigation system on the advanced models is simpler and uses the native X-Plane database rather than a custom one. This Advanced package
is suitable for both the experienced and novice user."

What, when you decide to buy the Flight Factor A350, can you expect of main features? Let's sum these for you:
- Fully custom aircraft systems.
- Fully custom ECAM monitoring system.
- Fully functional Airbus style alert system.
- Fully functional interactive Airbus electronic checklist system.
- Airbus A350/A380 unique "touch screen" interfaces.
- Fully custom and unique MFD (Multi Functional Display) system.
- Full OIS screen system with many aircraft options.
- Old style MCDU and fully functional AUX instruments as backup.
- Integrated QPAC FBW.
- Advanced flight planning interface based on X-Plane native data.
- Basic SID/STAR implementation using X-Plane FMS-files.
- "What you see is what you fly" flight path indication on the ND.
- Implementation of most of the Airbus AP modes.
- Full PFD and ND displays.
- Independent Auto Pilot systems.
- Scroll mouse wheel support for switch manipulation.
- and many more features.

This means, there's a lot to expect of this flight Factor A350 and I can tell you already, you'll be surprised. In other words, with such a brand
new aircraft, at least at the time of this writing, it seems to be a very interesting X-Plane aircraft. Time to move on and see how easy it is to
fly.

Table of Contents
Due to the length of this review, I've decided to include a table of contents. Hopefully this will help you finding the chapters of your interest.

Chapter 1: The Real Airbus A350XWB


Chapter 2: What do you get?
Chapter 3: Where to begin?
Chapter 4: OIS (Onboard Information System)
- I | Options
- II | Ground Services
- III | Weight & Fuel
- IV | Cabin Announcements
- V | User Guide
- VI | Charts
Chapter 5: MFD (Multi Function Display)
Chapter 6: MCDU and ...
Chapter 7: Worth To Know ... A350 trimming ... yes or no?
Chapter 8: Walk-around at LFBO
Chapter 9: Jumping In and Flying Away ...?
- Part I | Using the MFD Electronic Checklist
- Part II | Flight Plan Loading in General
- Part III | What's Simulated and what's not?
- Part IV | How does the flight deck feel?
- Part V | And how does the virtual cabin feel?
Chapter 10: European Flight LFBO - BIKF
- The flight Plan

2 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

- Making your own A350XWB OIS Charts


- Preparations
- Engines Start
- Taxi, Takeoff and Climb
- Climb to Cruise Level
- Descent, Approach and Landing
- Aircraft termination and .....
Chapter 11: A Small BIKF - BIKF Training
Chapter 12: Frame Rates
Chapter 13: Summary

The Real Airbus A350XWB


A350 ... 25% lower fuel costs, no compromise on comfort.
The A350 XWB (Extra Wide Body) is an all-new family of widebody aircraft offering 276-369 seats with its three passenger versions:
A350-800, A350-900 and A350-1000. Scheduled to enter commercial service later this (2014) year, the A350 XWB will set a new standard of
comfort and efficiency in its class, with 25 per cent lower fuel consumption compared to its current competitor.

It will also bring a new level of passenger comfort, with more personal space and 18-inch wide seats in economy. The A350 XWB has the
flexibility to embrace growing passenger numbers.

The A350 XWB twin-engine jetliner is shaping the future of air travel by offering a complete family of new-generation aircraft that is best
suited to the market's requirements for size, range, revenue generation, passenger comfort and the environment.

Photos courtesy of Airbus

Over 70 per cent of the A350 XWB's weight-efficient airframe is made from advanced materials, combining 53 per cent of composite
structures with titanium and advanced aluminum alloys. The aircraft's innovative all-new Carbon Fibre Reinforced Plastic (CFRP) fuselage
results in lower fuel consumption, as well as easier maintenance.

The A350-800 is the shortest fuselage version in Airbus' new A350 XWB all-new family of mid-sized widebody airliners. It accommodates
276 passengers in a typical two-class cabin, with a flight range of 8,250 nautical miles. The A350-900 is the cornerstone member of Airbus'
all-new A350 XWB Family, which is tailored to meet airlines' future market requirements in medium-to-long haul operations. Measuring
nearly 74 metres from nose to tail, the A350-1000 is the longest-fuselage version of Airbus' all-new family of widebody jetliners, which is
designed for high efficiency, maximum reliability and optimised performance.

Cockpit and avionics


The revised design of the cockpit dropped the A380-sized display and adopted 38 cm (15 in) LCD screens. The new six-screen configuration

3 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

will have two central displays mounted one above the other (the lower one above the thrust levers) and a single (for each pilot) primary
flight/navigation display, with an adjacent on-board information system screen. Airbus says the new cockpit will allow advances in navigation
technology to be placed on the displays in the future plus flexibility and capacity to upload new software and to combine data from multiple
sources and sensors for flight management and aircraft systems control. The A350 XWB will also feature a head-up display.

The avionics will be a further development of the integrated modular avionics (IMA) concept found on the A380. The A350's IMA will
manage up to 40 functions (versus 23 functions for the A380) such as undercarriage, fuel, pneumatics, cabin environmental systems, and fire
detection. Airbus says benefits will include reduced maintenance and lower weight because IMA replaces multiple processors and LRUs with
around 50% fewer standard computer modules known as line-replaceable modules. The IMA runs on a 100-Mbit/s network based on the
avionics full-duplex (AFDX) standard, already employed in the A380 instead of the architecture used on the A330/A340.

There's so much more to tell about the A350-900 Family members, but copying and pasting it into this review is a little useless. Therefore, I
encourage you to have a look at the following dedicated websites and or Youtube movies:
- Airbus A350XWB site
- Airbus A350XWB magazines. Also available for Tablets
- Airbus A350XWB 3D cockpit view
- A350 XWB wallpapers
- A350 XWB uncut Maiden Flight
- Youtube A350XWB
- WikipediA A350XWB

What do you get?


Before using the Flight Factor A350, you need either an offline or online activation. For online activation or validation which is the fastest
way, an Internet connection is needed. This is the only way to protect the aircraft package for piracy and listening to many XP developers, it
seems to be a secure and effective system. When you own for example other Flight Factor aircraft, or the SSG 747-8i Advanced, the
JARDesign A320neo or Peters aircraft A320/A321 Series, you're for sure familiar with this validation process.

But let me go one step back; where should you install the A350?
You are free to install the package where you want by just copy and paste of the downloaded contents. Either you copy and paste the A350 in
the "Heavy Metal" aircraft folder, or you create a aircraft sub-folder "Commercial Aviation" or when you own other flight Factor products, a
sub folder named "Flight Factor". Feel free to do what you feel is logical for you!
The basic package comes with a paint kit, and 7 liveries. The airliners included are:
- Airbus house color
- Airbus Carbon
- Air France
- British Airways
- Qatar
- Lufthansa
- United Airlines

In the A350 root you'll find an Airbus look-alike Acrobat document named "briefing". I purposely wrote "look alike" since this Acrobat
manual partly contains real Airbus A350 XWB pilot information together with Flight Factor information. That said, the briefing manual is
only 218 pages. You can decide to print it, but that means a lot of paper but even more ink you need. I leave this up to you what you decide.
On the other hand, the whole manual is always with you on board your flights. Oops, what's that? Very easy ... the complete content is directly
accessible on the captain's OIS (Onboard Information System).

The supplied Flight Factor "briefing" manual can be split, with some minor changes compared to the real Airbus A350 Flight Deck Briefing
manual, into two sections:
- Flight Factor A350 related pages.
- Airbus A350 related pages.

The "Flight Factor A350 related pages" cover the introduction, Flight Factor model classification, how to install (what you most likely did
already), support and troubleshooting, X-Plane joystick and shortcuts assignments and finally, using the OIS (Onboard Information System)

4 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

and MFD (Multi Function Display).

The "Airbus A350 related pages" are essentially based on the original A350 Flight Deck Briefing document with the exception of some pages.
This part of the manual covers all aircraft systems in detail, and so is altogether a lot of information to read! Remember that this Airbus
section isn't of the same depth as the official A350 FCOM or other technical manuals.

When you don't own the Flight Factor aero A350 yet, you can check out this link that leads you directly to the official Airbus A350 Flight
Deck Briefing Acrobat document and see for yourself in advance what the real A350 offers, which is more or less the same for the modeled
Flight Factor A350 Advanced besides some systems like the use of the X-Plane default FMS database.

Where to begin?
I could start with my thorough walk-around inspection, but I think it's better to explain a little more about the on-board modeled OIS, LH and
RH MFD and the popup MCDU. The reason for discussing the OIS first, is because it offers a lot of useful information and it's also the control
center to modify, manipulate or include features.

No no, no more mystery sentences, let's start with the OIS description and operation followed by the MFD.

OIS (Onboard Information System)


The OIS consist of different pages namely:
I | Options
II | Ground Services
III | Weight & Fuel
IV | Cabin Announcements
V | User Guide
VI | Charts

I | Options
Each page or sub page and its functions is controlled with the mouse button.
The Options page allows you to change or modify the aircraft behavior and/or the way you control the knobs
etc.

Most functions speak for themselves however, a few need additional attention. With the "MFD Control"
you're able to control and operate the OIS and MFD screens via a popup window or on the screen in situ.

The popop up function is very handy in case you need to OIS constantly on your screen while you scroll to
other places in the flight deck.

II | Ground Services
Ground services consist of three sub pages, namely:
- Doors & Hatches
- Ground Equipment
- Pushback

When you click the "Doors & Hatches" button, you get an overview of all passenger and cargo doors. Note that all passenger and cargo doors
are functional except for the passenger doors 3R/L. The "Ground Equipment" page lets you control al kind of ground equipment ranging from
GPUs, high Pressure supply units, buses, fuel truck, loaders, to stairs etc. It also offers an "Auto Config" button that sets up the A350 directly
in the correct basic ground configuration with the basic ground equipment around the aircraft. On the right of the page you'll find a
Maintenance button, however this failure system isn't implemented in this Advanced model.

5 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

The last sub page is "Pushback". You can perform a push or pull. The rest of the page is self-explanatory.

III | Weight & Fuel


Passengers (Weight)
The aircraft weight and fuel page is divided into a passengers and fuel sub page. When you click the Passenger button, a synoptic of the upper
deck and lower deck (cargo with LD3 containers) is presented. You can select per class (first, business and economy) as well as the number of
crew members, the number of persons. When you enter a value too high for the respective class or too many crew members, the value changes
into amber and a fault message comes into view. The same idea can be found for the cargo compartments except for the BULK area. When
you don't want to select per passenger, crew member or LD3 container, then you can go for one of the three preselected loads. These are
identified as "Light", "Middle" and "Heavy".

Fuel
The fuel sub page is basically the same idea. Instead of passengers, crew members and LD3 containers, you enter the amount of fuel you need
to:
- Reach your destination
- Reach your alternate airport
- Contingency
- APU running time
- Expected taxi time at departure and arrival
- Remain, remaining fuel on-board at arrival on gate

When you click one of the fields to enter the kilograms (pounds) or minutes, the "key input in progress" automatically becomes active. Great
words for you can enter via your keyboard the value you want. This idea is the same for the number of passengers, crewmembers or LD3
containers.

Cabin
This page gives you access to cabin related items like controlling the cabin lighting. Further on, you can control the DOOR SLIDE status.
Actually, you can place the door slide system in AUTOMATIC or MANUAL. For your information: MANUAL means that the door slides
system is disarmed and that when opening the passenger door(s), the slide(s) won't deploy. In AUTOMATIC mode, the slide system is armed
and when then a passenger door is opened, the slide will deploy for evacuation purposes. On the same window you'll find on the right hand
side the water tank quantity in percentage between 0% and 100% as well as the lavatory waste quantity.

IV | Cabin Announcements
This page allows you to play cabin announcements. Just select the announcement of your choice, click the PLAY button and the
announcement will be spoken. This can be seen by the green IN USE text on the page. When you don't hear anything, be sure you have the PA
volume selector, situated on the captains RMP, switched ON and that the selector is illuminated white/light grey. Just to be sure, I'm not
talking about the PA switch above the PA selector.

V | User Guide
During your ground preparations, taxi, takeoff, climb and any other flight phase, you always have the complete A350 Flight Deck Briefing
document with you, accessible via this OIS page.

VI | Charts
In the Flight Factor A350 folder you'll a sub folder "Charts". By default this folder contains already some chart folders namely EBBR, EDDF
and LGAV. Further on, you also find two files: "pdf2png.jar" and "pdf2pngHD.jar". What can you do with these Java files and what's the
result? What you first need is Acrobat files from the airport. When you have an airport package consisting of Acrobat ground movements, SID
and STAR charts as well as ILS or RNAV approaches, you can use the "pdf2png.jar" or "pdf2pngHD.jar" file.

The "HD" means that the generated png files are of a higher resolution. When you've placed the Acrobat file and the respective "jar" file in a

6 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

folder, you simple click the Java file and automatically a folder with png files is generated. Rename the created folder with its ICAO airport
name and place the created folder in the A350 Charts folder.

But what was the reason to bring this up?

The reason is that you can check out these charts on the OIS while parked at the airport. You can call up these png files via the OIS for your
departure and/or arrival. Think about it, the possibilities are "almost" unlimited.

A collection from left to right: cabin announcements, user guide and charts

MFD (Multi Function Display)


By default, the left hand MFD offers the following four sub pages:
- FMS 1
- ATCCOM
- SURV
- FCU BACKUP

The right hand MFD offers by default the C/L menu (Checklist menu). You can swap the left and right hand MFD images with the left hand
DISPLAY CYCLE pushbutton. The right hand DISPLAY CYCLE pushbutton isn't functional. Next to this DISPLAY CYCLE pushbutton
you'll find the OIS TO CENTER pushbutton. When you click this button, the complete OIS replaces both MFDs, but they reappear on the
captain's DU which was previously showing the OIS.

Still with me?


Let me highlight a couple of the MFD pages (FMS 1, ATCCOM, SURV and FCU BACKUP) on the, by default, left hand MFD.
I first start with the FMS 1. This page and the many subpages are actually the same, or let's say, similar to the old-fashioned FMS MCDU.
The look is different since there's no keyboard, however you can use your computer keyboard or the simulated KCCU (Keyboard Cursor
Control Unit). The SURV page ("surv" is the abbreviation for surveillance) is a screen and backup version of the surveillance control panel on
the pedestal. This control panel allows the pilot to control the weather radar and TCAS. Also, some MFD pages can also be requested via the
KCCU top row buttons.

The FCU backup in the MFD is, as the name suggests, a backup for the "AFS (Auto Flight system) panel" and the "EFIS control" panels. The
only real and simulated reason to have this installed in the real and Flight Factor aircraft is that these functions can still be used in case the
"hardware panels" should fail. OK, the MFD FCU BACKUP has two sub pages, namely "Autoflight" and "EFIS".

When you click the Autoflight software button, the whole AFS panel pops up on the MFD. Click the "Autoflight Back-Up" software button
on the MFD and everything below on the MFD becomes active. Now you can adjust or changed settings as you normally do on the AFS
panel. When you click the EFIS control button, the same can be done as described in the Autoflight section, but now related to the EFIS
control panel.

Some words about the, by default, right hand MFD with the interactive normal procedures checklist. If you know the Flight Factor 757, then
basically this A350 follows the same idea. Checklist items are colored cyan (light blue), and the message/line becomes green when you've
checked it or when you've performed the correct action. When you click on a cyan colored line and you don't perform the action or an
incorrect action, the line turns magenta (pink).

7 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

These screenshots show you the MFD. On the left hand side you can select the FMS, SURV, FCU BKUP and ATCCOM pages. On the right
hand side you'll find the electronic checklist. Underneath the ISIS instrument, you find DISPLAY CYCLE and OIS TO CENTER
pushbuttons. With the DISPLAY CYCLE you swap the two MFD displays. With the OIS TO CENTER, the captains OIS moves to the center
(pedestal) position and the MFDs move to the captains OIS position.

MCDU and ....


And finally there's the popup of the MCDU (Multi function Control Display Unit), situated on the rear left hand of the pedestal. In the real
aircraft you won't find a MCDU here. Instead there's the third RMP (Radio Management Panel). The built in MCDU is fully functional, but
for your convenience you can click on the display and a MCDU 2D pops up. Very handy, the same as the 2D popup displays of the MFDs and
the OIS.

What else is important to know before I can finally start with my thorough external inspection? In the real A350 you will find in front of the
captain and co-pilot a foldable keyboard. The simulated Flight Factor A350 Advanced version offers a foldable but non-functional co-pilot
keyboard. On the captain's side the keyboard is not foldable at all. Being at the captain's side in the flight deck, according to Roman "the HUD
(Head Up Display) isn't yet functional". Oops, almost forgotten ..... the co-pilot's OIS. This OIS isn't functional and shows a static page of the
flight controls Normal Law.

The old-fashioned FMS MCDU is situated at the rear of the pedestal and offers a popup MCDU too.

Finally, I think I've reached the end of this section. Now it's time to do my thorough walk-around inspection.

Worth To Know ... A350 trimming ... yes or no?


Question ... do you need to trim the A350? Do you need to trim for example the ROLL and PITCH channels under normal flight conditions?
An interesting question isn't it!

To answer this, I could find it out myself, but it's better to ask one of the Flight Factor A350 beta testers, Marcelo Alencar. Marcelo is an
active ATPL pilot flying for Qatar and yes, he's an acting captain on the Airbus A330 Series as well as instructor and also flying the Airbus
A340-600. According to Marcelo "None of the FBW Airbuses has a trim switch on the sidestick. Airbus has what we call "auto trim" and this
is directly linked with the flight control laws.

On the A320, A330 and A340 you still have the trim in case you end up using a mechanical backup. There you can see the trim wheels moving,
but you can't interact "command" them. If you degrade to a direct law or mechanical backup, than you can use the trim wheels to control the
pitch. This is very difficult to maneuver and as per Airbus, it's very unlike to happen!

On the A380 and A350 the trim wheels are replaced by a pitch trim switch which has the same functionality as the trim wheels but only a lot
smaller. Remember; on the sidestick you only have the PTT p/b (Push To Talk switch for the radio) and the red AP disconnect p/b. On all
Airbus the information goes to the computer and then to the surfaces.

After engine start, you set manually the TO C.G. % using the trim units, applicable for the A330-200/-300 and the old A340. On the new
A330F (Freighter) and A340-500/-600, this is automatically done by the computer using the information that the pilot inserts via FMS. After
take off there is a transition on who's is controlling the airplane (what laws are working). You do the take off almost on Direct Law and after
approximately 10 seconds the system reverts to Normal Law. At this point the computer start trimming the aircraft based on pitch and speed.
During the whole flight, the system looks for the best C.G. based on altitude, speed and weight. It uses, if applicable, the stabilizer TRIM tank
to change or improve the C.G. by moving the fuel from the other fuel tanks to the trim tank and of course, some conditions are there to

8 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

comply."

Hold on .... the Flight Factor A350 isn't the only X-Plane Airbus aircraft that uses Auto Trim. In fact every payware Airbus has some kind of
Auto Trim. For example, the JARDesign A320neo, the QPAC's A320 which uses the same plugin as the Flight factor A350 and not to forget
Peter Hager's Airbus aircraft collection for XP10 which is again using the QPAC's FBW-plugin. All these aircraft have realistic Auto Trim
systems.

Walk-around at LFBO
For my test Airbus A350 I decided to do my walk-around inspection at the Alpha Bravo parking area of LFBO (Toulouse/Blagnac Airport).
For those who aren't familiar with LFBO, this is one of the older parking areas used for arriving and departing aircraft during the old days at
Blagnac airport.

Walking from the old terminal to the parked A350, I'm so happy to say that from a distance while walking to the aircraft, it's unmistakably a
well-modeled 3D A350 model, but how is it when doing a close-up inspection? Let's check that out. Before doing anything, I want, at this
early hour of the day, also to check the external lights. Therefore, via the modeled stair, I go to the flight deck, switch on the external power
and all the external lights. To switch on the external power, you need first to switch on the batteries, and then via the captain's OIS, the
external GPUs. In the real airplane, the green external power AVAIL lights are already active the moment the GPU is connected and voltage
and frequency are OK. This is, according to Roman, differently modeled in the A350. With all the external lights illuminated, I'm ready to
start my external check.

As I wrote before, the overall model is typically an A350-900, this being the aircraft variant that's modeled. But even close-up inspection of
the NLG (Nose Landing Gear), MLG (Main Landing Gear), engine inlets and cowlings tells me that the gears, gear doors and engine shape
are all very nice although I have to admit that I can't find many really good close-up A350 landing gear pictures. Since I've never touched a
real A350 gear, I'm not 100 percent sure about the modeling, but it feels good.

The gears are slightly dirty or perhaps weathered is a better word. Some simmers will say that this is not realistic since the real A350 is almost
a brand new aircraft. Others will say that the gears, even if they a couple of weeks old, before you know it, they will be dirty. Based on my
own real ground engineer experience, I must say that even with brand new aircraft, landing gear are, before you know it, dirty, and cleaning
them with high pressure isn't allowed because this could remove the grease on all the hinges, linkages etc. Therefore, the way the gear is made
dirty is in my humble opinion realistic and don't forget that first A350 flew some months ago.

Anyway, the dirty fuselage belly look is for some simmers again something to discuss. Some like it, while some simmers prefer a cleaner look
because it's a brand new aircraft. Suppose it's a brand new aircraft, suppose it's for the launching customer Qatar, then even after a month the
belly isn't new anymore and cleaning helps, but you never get it as it was at delivery.

Long story short; I like the slight dirty or weathered look of the gears and fuselage belly, but the textures on the strut and wheels aren't really
sharp. I miss a little bit the tiny details, especially when you zoom in on the struts. This is the same for the MLGs too.

Further on, I have my thoughts about the presence of the ground personnel situated around the aircraft near the NLG and FWD stair. I
personally would prefer that you could select the ground personnel on the OIS ON or OFF. The reason for this thought is that I find, yes, it's a
personal feeling, the overall quality of the persons not so impressive. I highlighted already the look and feel of the RR Trent engine cowling,
inlet and exhaust. The overall look is good including the crispy decals. Looking at the engine pylon, I'm a little surprised about the size of the
rivets and/or bolts. The engine pylon skin has a lot of panels and therefore a lot of rivets which can be clearly seen, but I feel that the size of
the rivets is a little bit over the top. Normally you won't see the rivets that clearly since they are quite small in reality.

With a stair near the wing tip, I'm able to check the top surface of the wing too. It looks very nice, realistic, but the mid wing area between the
FWD and AFT stringers is dark grey and weathered or dirty. This is not real. The top of the wing, based on my real experience, stays most of
the time quite clear and equally light grey. Continuing with the wingtip, I really like the way the wing fence is modeled. It all depends on the

9 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

livery and the Airbus and Carbon livery bring the fence to life.

While walking around the wing towards the fuselage tail section, you can clearly see the presence of the NML (Normal Mapping) file which
gives, under the right external lighting conditions, a kind of 3D effect with respect to skin plates, rivets, panels etc. Another issue with the
external model is that what could be slightly less is the size of the screws and/or rivets on the passenger doors. These are too big and also dark
grey or perhaps black, while in reality they are situated outside the light grey lining and have the color of the door, so you normally hardly see
them.

But the moment I reach the tail with the horizontal and vertical stabilizers as well as the APU exhaust I've got a big smile on my face. This is
nice 3D modeling and very accurate as far as I can tell, compared with the available A350 XWB manuals. I walk back via the right hand
fuselage, have a quick look into the AFT and FWD cargo compartments and stop for a moment at the right hand MLGs. By the way, the
BULK cargo hold at the AFT left hand fuselage is also modeled.

In respect to the NLG, each MLG is more complex. Not only because of the bogie beam, but also due to all the hydraulic lines and wiring that
is modeled. I can clearly see the brake units, the bogie beam construction, the torque links, the upper linkages and not unimportantly, the fixed
landing gear door with all the connection rods. Although the MLG movable door is closed on the ground, I think that the inside of the landing
gear bay is covered with texture material or perhaps even photo real material.

As long as it's covered with textures, it's OK with me. While approaching the nose of the fuselage, I look once more up and see the
characteristic windows. It is not just for fun that they are made in this way; there is a special reason why Airbus designed it this way.
According to Airbus "A big challenge in A350 XWB going to curved windows is that curved windows are much harder than flat windows to
optically match to the HUD (Head Up Display), which both these aircraft offer. The optical quality controls on the curved glass are
extraordinarily tight, to be able to certify the HUD for takeoff and landing.

Aerodynamics departments don't like flat surfaces in general. But there is also another key factor; visibility for pilots; they hate not being able
to see. Airbus made in 2008 a revision that changed the shape of the upper radius and upper shell of the fuselage for aerodynamic reasons.
Airbus refined the six-windscreen layout and worked to minimize the center post to improve the pilots' visibility.

On the other hand, glass maker Saint Gobain hate not-flat surfaces and the cost is higher because of complexity of the manufacturing process
for a transparent laminate with rounded corners to prevent stress points in the cutout."

Overall a very well 3D model and very nice textures! Not that it's very important to know, but the Airbus Carbon color is definitely my
favorite.

10 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

Jumping In and Flying Away ...?


I could make this section as complicated as I want, but let me split it into several parts with all the subjects you need to know to understand
the complexity of the ultra modern Airbus A350 and the complexity of the modeled Flight Factor A350.

Part I | Using the MFD Electronic Checklist


No, you can forget that although you can make it yourself as complicated as you want, you need to follow certain steps unless you decide to
start X-Plane with engine running. Personally this is not my favorite and together with the n-board electronic checklist, there's also no need
for, but, yes, there's a but! That "but" is finding all the things in the checklist items mentioned on the MFDS isn't always easy, however, there's
also good news.

An electronic checklist item is by default cyan (light blue). When you've performed an action e.g. a switch from OFF to ON, and this is
detected by the electronic checklist system, the relevant checklist item turns into green. In some cases you need to check the status of
something and when this is correct, you can click the cyan checklist message and then it turns into green. When you need to do something but
don't want it, you can always click on the cyan message which will turn into magenta (pink). Overall the electronic checklist is a very nice
feature in this A350.

Not really mentioned before, but I think now it's the time to highlight this feature. You can control the screen functions/selections on the OIS
and MFD's with the yellow X. With the mouse you move the yellow X around and with the left hand mouse button you make your selection.
When for instance you need to enter a value like on the, by default LH MFD, FMS flight plan, you position your mouse with the yellow X to
the field you want to change (amber dashes or cyan figures) and then click with the left hand mouse the field you want to change. In the MFD
scratchpad you'll see the words in amber "KEYBOARD FOCUSED". Now you can enter the value you want either via your computer
keyboard or via the fully modeled KCCU. Do you still remember what KCCU stands for? Ok, let me help you ... Keyboard Cursor Control
Unit.

Part II | Flight Plan Loading in General


The modeled FMS isn't using AIRAC updates from either Navigraph or Aerosoft NavDataPro. Instead, the aircraft utilizes the standard
X-Plane 10 nav data, which can be updated with new data from Navigraph and/or Aerosoft NavDataPro. That doesn't mean you can't use the
on-board FMS MCDU or the MFD, but with a few more limitations. You can select from the XP default database runways, but you won't be
able to select a SID or STAR.

However, when you have created your own SID points for a particular runway with the help of real charts, you are able to load this via a
"QPAC SPECIAL | SID FROM FMS FILE" and of course the same is applicable for the STAR file. Anyway, which or what program to
generate a flight plan is good? It's not really a part of this review, and besides that, it also depends which platform you're using. Are you an
X-Plane Windows, Mac or Linux user? About Linux, sorry, I have no clue, but for the Mac there aren't that many real payware or freeware
flight-planning programs. For Windows X-Plane simmers there's much more choice.

But for me as a Mac OSX simmer I need to improvise and since Goodway can't be used anymore with X-Plane 10, you and I need to look for
other solutions. Of course, I could install under my Parallels Desktop for Mac a basic version of X-Plane and one of the payware or freeware
flight programming programs, but I only use Windows when I have no other choice anymore.

To create a flight plan you could use many programs, but let me highlight a couple of freeware possibilities. Let me start with Routefinder
which offers you quickly a flight plan, but this is not in "X-Plane fms" format. If you don't like Routefinder, you could check out FlightAware,
but again, this doesn't allow you to export it to an fms file format however, it offers real flight plans. Another very interesting website is
simBrief. Register for free and a wealth of flight planning information becomes available. Thanks Michael for bringing this up!

You could also go for the browser X-Plane Flight Planner. A very nice program - however, you need to create your flight plan yourself while
the previous programs generate a "real" flight plan for you, as far as real can be. FlightAware is doing this at least. The advantage of the
browser X-Plane Flight Planner is that you generate directly the X-Plane fms format and that's good news. But there's another possibility.

I found the browser-based Online Flight Planner which seems to be a good one although I'm not 100 percent sure if the generated flight plans
are as real as they should be. The good news is that it seems to do the same as RouteFinder, but with several export options, of which one is
"X-Plane fms". You can also enter the aircraft type, but right now the Airbus A350 isn't on the list yet. I suggest for the moment to select from
the list the Airbus A330.

11 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

An example of creating a flight plan with OnlineFlightPlanner. It uses the database from RouteFinder.

I'm happy, but the generated flight plan still doesn't include a SID or STAR and it would be nice if I could add this to my flight plan, even
when it's in the A350 flight deck. Mostly for each runway you'll have the option of more then one SID or STAR and the generated flight plan
doesn't include a runway, which is normal. Depending on environmental conditions and as decided by ATC, you're assigned a runway and thus
automatically a SID and STAR depending on which direction you go.

Long story short; without Navigraph or Aerosoft NavDataPro you have no access to a SID and/or STAR unless you have the official SID and
STAR charts of the airports on your route. In that case, you can enter the SID or STAR waypoints in the MCDU or MFD. Once you've entered
these SID/STAR waypoints, you're able to save this SID/STAR in the A350. This is one of the A350 Advanced limitations. The A350
Professional allows you to use the NaviGraph AIRACs.

Ok, where and how to install your created fms flight plan? Drop the fms flight plan file in the Output/FMS plans folder. Naming convention?
Try to keep the flight plan names short, but name them not too short. You can use capitals or lower case in any combination. That's it
basically, when it comes to your flight plan and how to use it. Further details can be found in the A350 briefing manual.

Part III | What's Simulated and what's not?


Doing the complete cockpit preparations is possible up to - let's say - 97%. That said, 3% or perhaps even less isn't simulated or has no output.
Further on you need to keep in mind that the Advanced A350 doesn't use an official AIRAC DB, but just the X-Plane FMS files. For those
who are happy with that, believe me, there's still some FMS preparation to do. When you're familiar with modern Airbus aircraft, you'll notice
that programming the FMS MCDU or via the MFD is easy and before you know, you're done. The best is, I think you're aware of that, to
prepare a flight plan with the help of an external program or via the provided browser online program. Then you can load the whole flight plan
for your route straight away and it's as real as it gets.

Although some simmers find "less simulated systems" a pity while others have no problems with it as long as the aircraft flies as real as it
gets. I mentioned something before about some systems or items that aren't simulated. For example; the co-pilots foldable keyboard is
simulated in that way that you can slide it in and out, but the virtual keyboard itself isn't functional. The captains foldable keyboard isn't
simulated at all which is also applicable for the co-pilots OIS.

This screen shows only a static page of the normal law whereas the captains OIS is fully functional. And then there's the question .... is it
really so important that the folding table with keyboard isn't simulated or that the co-pilots OIS is a static page? All additional features cost
CPU power, perhaps also frame rates and in my humble opinion I prefer an as real as possible flying Airbus.

Overall I can conclude that many systems are simulated and perhaps I've missed a switch or knob that doesn't have a function or output.

Part IV | How does the flight deck feel?


Overall I'm happy with what I see, but how about the panels themselves? Do I like them, are they weathered or do you see any scratches and
more of that? Remember, while writing this review, the first official A350 to Qatar isn't even delivered yet, and thus I may assume that the
cockpit panels aren't weathered at all. The Airbus liveries included in this package which are the carbon, the standard blue house painting and
the mixed Qatar/Airbus livery, they all have flown already for a while around the world.

That said, I doubt Airbus Industries or EADS pilots are not being gentle with the flight deck, but normally you should see some "used" spots.
That's something you won't find, but I can live with that. The only thing that's difficult to judge is the "blue" color of the cockpit panels. When
you check "main.png" file that contains all the panels, they are indeed a kind of grey/blue; however, what I see on my iMac is, depending on
my gamma value, blue to grey/blue. The grey/blue I like, but then I've set my gamma to 2.6 which is very high and makes external scenery too
light. When I reduce my gamma on my Mac to 2.0, the scenery looks nice but then the panels are quite dark.

Perhaps this is different on a Windows machine. I don't know that, but checking out real A350 flight deck for their grey or perhaps a mix of
grey/light blue tells me that the real Airbus A350 is not as blue as I see on the real photos. Further on, some of the panels have at the edges a
kind of weathered look. Some of the grey/blue paint seems to be missing. If this is real, I'm not sure, but hey, it's something to give it a "used
look".

12 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

It seems to me that the pilot and observer seat cushion fabric used in the Flight Factor A350 are made of a different kind of "fabric" or I could
say, the fabric color and pattern do not match the dark star fabric which can be seen on photos The overall modeling and 3D art work is nice as
well as are the knobs, switches, buttons, displays, indicators and much more of this. Even zooming in onto the different DUs (Display Units)
or control panels on the pedestal or overhead panel, it stays sharp and panel text is even sharp too.

In that respect, I feel confident in the way the panels are modeled. Unless you zoom in a little too close, you'll notice the number of polygons
used for each mounting screen of the individual each sub-panels, but that said, normally you won't see this at all. I'm very pleased with the
EFIS, ECAM, OIS and MFDs. They are very nicely made, sharp, offer the right information as far as it was tested by the beta testers and for
further background, the available Airbus manuals.

All the DU's have one lighting control rheostat which is mounted underneath the glareshield. The text on the DU, whatever it shows, is
perfectly clear, sharp and thus well readable from a distance. The OIS - Options page - MFD control allows you to use the DU's as touch
screen thus via the yellow X and mouse or you can have a popup of the respective DU. The way you control the popup DU is the same as
when you use it as a touch screen. I personally prefer the touch screen mode, but I can imagine that you might prefer to have the LH MFD (for
your flight plan) being a popup screen. Instead you can always use the old-fashioned FMS MCDU when you feel more comfortable with that
one and the MCDU has also a popup function.

Part V | And how does the virtual cabin feel?


While in 3D cockpit mode, move to the cockpit door and open it with you mouse. Once open, move into the direction, via the FWD pantry, to
the First Class section, I assume. The galley or pantry is completely modeled with oven, storage bins, and trolleys, inside the passenger doors,
wall panels and ceiling. A small but interesting detail is that the galley floor is dark grey which is differently colored than the carpet in the
FWD cabin.

And yes, this is correct! The floor in the galley is most likely, in real life, covered with a kind of plastic material while the cabin is mostly
carpet. Anyway, when you walk to the first class area, I can't say anything else than everything that can be expected in a cabin is modeled.
You can have your doubts about not every part being sharp, but overall the forward section of the cabin is well modeled. And that not only
means the seats, but also the baggage bins, wall panels, ceiling panels, mid ceiling with bins etc. As far as I could see, there's no further
animation included. Between the First and Business class, I suppose I'm right, you'll find in the middle of the cabin a bar and directly behind
that the Business class seats.

When you walk further backwards, after passing a divider wall, the coach class or Economy class comes into view. As I see it, the seats are
again smaller and simpler. Half way down the Economy class you'll find some lavatories in the middle which are not modeled. Till the far end
of the virtual cabin everything is modeled including the large galley or pantry in the back.

13 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

Did I like the virtual cabin?


Let say ... it's modeled with an eye for detail. Not all of the highest quality or with more polygons, no, there's no need for that. It's a large
aircraft and modeling the virtual cabin too much, meaning many polygons, would unnecessary reduce the frame rates. On the other hand, it's
also fair to mention that when you're in the 3D cockpit, there's no unnecessary frame rates impact due to the modeled virtual cabin unless you
move to the virtual cabin.

I'm also aware that some simmers have no interest in a virtual cabin. They want a top-notch 3D cockpit with, if possible, all systems simulated
or nearly all. And yes, when there's no virtual cabin installed at all, then people will say and even complain ... why doesn't the aircraft has a
virtual cabin? Roman tried to keep the frame impact of the virtual cabin as low as possible to preserve most of the frame rates for the flight
deck. I think this is, and perhaps many others with me, a good decision.

European Flight LFBO - BIKF


The Flight Plan
My European test flight first starts with creating a flight plan with the help of the previous mentioned "Online Flight Planner" website.
Although the created flight plan doesn't include a SID and STAR, I can live with that for the moment. The contents of the flight plan, in
X-Plane fms format, can be found below. Feel free to use the contents of this for your first flight. Copy and paste the contents and name the
file for example "LFBOBIKF.fms" and copy and paste it into the X-Plane Output/FMS plans folder.
I
3 version
0
38
1 LFBO 0 43.635100 1.367900
11 LACOU 0 44.296800 0.904400
11 CHALA 0 45.355300 0.130800
11 TUPAR 0 46.429200 -0.662800
11 ANG 0 47.536900 -0.851800
11 DIKRO 0 49.584700 -1.110800
11 EPATI 0 49.793600 -1.082200
11 KOTEM 0 50.000000 -1.053900
11 PILIP 0 50.334200 -1.007200
11 SUSIX 0 50.616700 -0.967500
11 AVANT 0 50.820000 -0.938300
11 MID 0 51.054000 -0.625000
11 OCK 0 51.305000 -0.447200
11 HEMEL 0 51.805600 -0.419400
11 BUZAD 0 51.942200 -0.552200
11 WELIN 0 52.247200 -0.852200
11 AKUPA 0 52.486700 -1.091100
11 TIMPO 0 52.558900 -1.163900
11 ELVOS 0 52.700300 -1.306900
11 TNT 0 53.054000 -1.670000
11 POL 0 53.743800 -2.103300
11 RIBEL 0 54.016100 -2.289700
11 SHAPP 0 54.500000 -2.627200
11 MARGO 0 54.707500 -2.774700
11 TLA 0 55.499100 -3.352800
11 FINDO 0 56.369200 -3.463600
11 VADNO 0 57.453100 -3.627200
11 PIPEM 0 58.156400 -3.738600
11 SOXON 0 58.968300 -3.872800
11 BAMRA 0 59.433300 -3.952800
11 GONUT 0 61.000000 -4.583300
11 MY 0 62.106900 -7.587700
11 LARUX 0 62.621700 -10.000000
11 ROSTI 0 63.406400 -14.112200
11 ING 0 63.803100 -16.638100
11 MIKLA 0 63.848300 -17.574200
11 NASBU 0 63.946700 -20.348100
1 BIKF 0 63.985000 -22.605600

I will try not to write a tutorial within this review, since that's not the intention of a review although I believe some readers would thank me if
I included a tutorial. Sorry about that! To monitor the flight, many possibilities are available. I choose for the freeware iOS App X-Mapper
Lite. It's a handy app for the iPhone or iPad and it allows you to track your aircraft position on a map, hybrid map or satellite image. More

14 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

information can be found at the iTune web page. There's also a Pro version which is worth the investment when you want something more. It
only cost $ 2.99 US and offers, besides real time X-Plane map tracking,a flight yoke function and a full-equipped avionics panel. Curious
about this App? Check it out at the link.

Making your own A350XWB OIS Charts


Ok, how to make your own onboard charts of the departure and arrival airport? I haven't seen it in the briefing manual, sorry when it's there
and I missed it, so let's highlight the steps to follow.

Step 1:
Find the charts you need. For LFBO, my departure airport, I found them on the official French SIA website. The output of these charts is in
Adobe Acrobat format.

Step 2:
Go to the Flight Factor A350 "Charts" folder. In this folder you'll see already a couple of folders, namely EBBR, EDDF, LGAV and LZIB.
Further on, two Java script files "pdf2png.jar" and "pdf2pngHD.jar". The Java file with "HD" in it creates higher quality images and that's the
one I prefer. Next I copy and paste the downloaded LFBO Acrobat files into the A350 "Charts folder".

Step 3:
With only three LFBO Acrobat files in this folder, I click the pdf2pngHD.jar file. This script will execute a conversion that leads to the
creations of png files. When ready, you'll see three sub folders named:
- 1411_AD-2.LFBO
- 1412_AD-2.LFBO
- 1412_AD-2.LFBO-2

Not strange, since these are the same names as the Acrobat files. When I look into these three LFBO folders, I find all the individual charts in
png folder. I suggest that you rename the LFBO folders to, for example, LFBO 1, LFBO 2 and LFBO 3 or any other naming system as long as
you keep it short. Short because the available field length in the left hand column of the OIS Charts section is limited. You can also decide to
add all charts in one LFBO folder.

Step 4:
You're done! When you now look into the OIS Charts section, you will find the newly created LFBO folders including the charts. This was an
easy job or not? Oops, almost forgotten for those simmers who would like to have the charts for BIKF. Check out this official AIP Iceland link
and follow the same procedure as above to add BIKF also to your A350 Charts map.

Preparations
I started the preparations from a cold and dark Airbus A350-900 with Carbon livery, parked at one of the old LFBO aprons near terminal 1. To
be exact, I parked the Airbus A350 at apron Alpha A23. I did some cockpit preparations from memory, but quickly looked things up in the
electronic checklist too. Before you're able to use the electronic checklist, you need to select battery switch 1 ON and, either GPU power
selected via OIS/Ground Service/Ground Equipment or the APU generator. Just a small tip ..... when you start the APU, and when the APU is
up and running, select the APU GEN ON, and the BUS TIE ON (AUTO). That's enough for the moment to have most of the aircraft systems
powered.

I calculate roughly the fuel I need for the trip to Reykjavik including the additional fuel needed for an alternate airport, taxi, contingency, APU
and remaining fuel upon landing. Via the OIS I insert the number of passengers and the amount of fuel I need. As long as the engines aren't
running, you'll see some people around the aircraft. When it comes to the FMS initialization (INIT) and performance (PERF) pages, in the
briefing manual there's a short description of how to handle takeoff speeds and FLEX TO temperatures. More or less the same issue is true of
the CI (Cost Index) on the INIT page. That said, I use for my flight a CI of 50. When you want to check all your waypoints, you can use for
this the PLAN mode on the EFIS control panel.

In combination with the flight plan on the MFD or MCDU, you can scroll thru the flight plan in combination with the ND. But you need to
keep in mind that scrolling thru the MFD flight plan is linked to the captain's ND and EFIS PLAN mode. Doing this on the MCDU, you need
to use the co-pilot's EFIS control panel ND PLAN mode with the co-pilot's ND.

Engines Start
Via the checklist I've reached the point where I can start my engines. When you're not familiar with how to do this, read once more the
briefing manual via the Acrobat file or just, and much easier, via the left hand OIS. Then read the steps in the electronic checklist and you'll
find out that it's really very easy and this is not because you're dealing with a simulated model. This is as real as is gets except for the many
malfunctions that can appear during a real engine start. Although I have to admit that today's FADEC (Full Authority Digital Engine Control)
is clever enough to detect any malfunction, sometimes before a pilot notices anything the FADEC takes immediate corrective actions and via
ECAM the pilots are informed what to do.

By the way, manual engine start with the help of the guarded MAN START switches on the overhead panel isn't implemented. Basically an
A350 XWB engine start is no more then placing the ENG START selector to IGN START and position the ENG 2 switch to ON. The rest is
controlled and monitored by the simulated FADEC. As simple is that .... as real as it gets!

Hold on .... some steps are needed in advance.

15 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

Of course, to start the engines you need bleed air for the engine starter. That said, you need either APU BLEED AIR thus the APU should be
running or you use external high-pressure bleed air. The latter can be selected from the OIS Ground Services - Ground Equipment - High
Pressure Unit. Tick CONNECT and ENGAGE. However, the external high-pressure unit is connected to the left and bleed system and thus
only available to the left hand engine starter.

Therefore, you need to select the BLEED X valve (CLOSE-AUTO-OPEN) to OPEN. Next select the ENG START selector (CRANK-NORM-
IGN START) to IG START position. Due to this action, the ECAM ENGINE synoptic appears on the display. Then it's just where I started
with, select the ENGINE 2 switch to ON and monitor the engine parameters. Since it's all controlled by FADEC, any problems that could
appear are monitor by FADEC and if needed, the engine is shutdown. No, you won't have any problems, believe me!

Taxi, Takeoff and Initial climb


Taxiing to runway 32L is not far, but long enough to get a good idea about the taxi characteristics of the modeled A350. The modeled A350
follows my NWS (Nose Wheel Steering) commands as expected. But just a tip ... try to keep your taxi speed low especially when making
turns else during turns the aircraft will not follow the intended taxi route. Sitting in the flight deck during taxi is nice and realistic, but please,
use also keyboard combination "Shift + 4" and see how the wing flex is implemented when, for example, you stop the aircraft using your
brakes.

I did discuss this implemented wing flex also with Roman and, according to his source, the A350 has a high wing flex due to the CFRP
(Carbon Fiber Reinforced Plastic) wing structure. According to Airbus "The A350 XWB wing is some 32 meters long by six meters wide,
making it the largest single civil aviation part made from carbon fiber composite material."

Are you ready for takeoff?


After everything set correctly for the takeoff, the YAW BAR on the PFD comes into view during the run. You don't need to do much for that
according to one of the developers; "The yaw bar comes always in view if the FD (Flight Director) is ON and the runway has an active ILS.
For example, most times at airports with 2 runways and operating on a configuration for departure and landing, always the departure runway
has your ILS OFF. In that situation we don't have the yaw bar available, if for some reason we need it then we request ATC to switch it ON for
our departure."

I set the thrust levers to FLEX TO thrust and let the aircraft accelerate. At the rotation speed indicated on the PFD, I gentle pull on the Saitek
X52 Pro stick and the aircraft starts to climb. Monitor your PFD closely since the flight directors come into view or actually I should say the
YAW bar disappears and the ROLL bar is replacing it.

Due to the implemented FBW plugin from QPAC, it flies like a charm and although I have no real Airbus FBW flight experience, it feels very
good. That said, you can decide to fly the A350 by hand for a while and thus you leave the Auto Pilot disconnected. Why not? In my years
with Martinair Holland on the Airbus A310 as ground engineer we had several pilots who flew the Airbus up to around 10.000 feet altitude by
hand - of course, they trimmed the aircraft, but no AP was connected.

In those days and with this aircraft, the pilot could trim for pitch via trim switches on the control wheel. When you think you have done
enough flying the A350 by hand, you can always decide to connect AP1 or AP2. The moment I've connected the AP, I have a little more time
for myself, and I can take a cup of coffee or tea, but above all, I can test and check my instruments and systems behavior. I can play around
with the ECAM control panel and see the status of each aircraft system which are, by the way, real time.

Climb to Cruise Level

16 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

With the A350 climbing to FL330, it's time for me to check out the ECAM system and play around with the OIS and MFD. The charts
function of the OIS is very good, however keep in mind that the overall resolution of the charts isn't always such that you can read what's
shown. Using the different functions and tabs of the MFD is nice, but remember that not all functions are functional. One good example is
adding a HOLDING. I mentioned before that you can't add a SID or STAR to your flight plan since the modeled FMS uses the default FMS
files. To automatically add a SID and/or STAR, you need either the Navigraph or Aerosoft NavDataPro AIRAC. But you can create your own
SID and STAR with the help of the respective SID/STAR chart, add this into the MFD or MCDU flight plan and save it for later.

If you want, you can even try, while at cruise with a perfectly trimmed aircraft, to disconnect the AP and fly it again by hand. You can but it's
far from realistic, assign the PITCH TRIM channel to your joystick via XP menu "Joystick & Equipment" sim/flight_controls
/pitch_trim_down and sim/flight_controls/pitch_trim_up. I write on purpose "far from realistic" since the Airbus sidestick doesn't have trim
switches.

In the real Airbus and modeled Flight Factor A350 with QPAC FBW plugin, when you move the sidestick (joystick), you actually command a
load factor. The computers then execute that command and they provide an output to the flight controls. That said, when you want to fly as
real as it gets, then don't assign for Flight Factor A350 any trim to the your joystick. Further more, ROLL trim doesn't exist in the A350, so
there's no need to assign this to your hardware.

Oops, I do not hope I have confused you!

Another thing you have to keep in mind is the absence of the TOC (Top Of Climb) and TOD (Top Of Descent) arrow on your ND (Navigation
Display). This means that you need to calculate the TOD yourself. Although not yet relevant, for a quick and dirty formula use the 3:1 formula
- that if you're at 30.000 feet, you need to start your TOD no later than 100 NM out of the arrival airport (Source airliners.Net) or have a look
to this link.

It's not my intention to write down every possibility you have with the touchscreen left hand MFD, but you can play with it during your flight
and see how a properly "touchscreen" it is. You can, indeed should, use it as a replacement equipment for the old-fashioned FMS MCD. The
left hand MFD can show you a little more than only a flight plan including all related FMS pages. The MFD can also show you ATCCOM,
SURV and FCU BKUP pages.

When you select ATCCOM, you'll notice that many other tabs are available of which some aren't functional. I tried to do a couple of things,
but I've got the idea that this isn't yet fully functional. The SURV page has two tabs of which both are fully functional and actually replace, in
case it is needed, the ordinary control panels on the pedestal. When you do your cockpit preparations, you can select for example on the
pedestal the weather radar panel, the ATC transponder panel and others, or you simple use this SURV option on the MFD. In my humble
opinion selecting the systems ON or setting values via the MFD is much quicker and you've got a better overview what to do. Although we
call it touchscreen, then perhaps not the right word since you can't control it with your fingers, but the fact that you can use your mouse and
the yellow X to control on-screen settings is very handy and close to the real A350 touchscreen.

The FCU (Flight Control Unit) BKUP MFD page is really worth a try, but when you try, keep on monitoring your EFIS displays to see that
what you change on the MFD is actually shown on the EFIS displays. The FCU BKUP has two tabs; AUTOFLIGHT and EFIS. Let me start
with a simple example. Let us select the EFIS tab on the MFD and try the VORD button. When I click it, the VORD button stays white and I
don't see any change. Oops, that's right ... it's a backup function. That said, you can't have two captains on one ship, right?

This means that I first need to activate the backup function before I can do anything. Click the EFIS CP BACK-UP once and the button turns

17 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

green. I've now activated the backup functions. When I now click the VORD button on the MFD, the button turns green which means it's
active and the output can be seen on the "hardware" EFIS control panel and of course on the ND provided you have the NDS mode selector in
NAV or ARC. Funny isn't it? Now up to you to try out the MFD AUTOFLIGHT backup.

Another thing that's worth telling you is the independent control and visualization of for example the ND displays. Indications on the co-pilots
ND are not a replica of what you see and adjust on the captain's ND. They work completely independently. That said, the captain's ND can
show an ARC with 20NM range and VORD button selected with VOR1 and ADF1 active while the co-pilot's ND can show totally different
things. Give it a try when you have the Flight Factor A350. Although the PFD indications look the same on the captain's and co-pilot's
displays, small differences are possible too, such as the BARO setting or STD indication. Even these are not master-slave indications! The
same is true for the LS (ILS) and VV (Velocity Vector) pushbuttons. When you've pressed the captain's LS and/or VV, there's no LS or VV
indication on the co-pilot's PFD. Again, separate systems and separate indications!

Since the trip to Reykjavik isn't a one-hour flight, it's perhaps also an idea to check out the onboard user manual, or you can do already some
descent preparations before. There's a lot to see and to try in the modeled A350 flight deck. Enjoy!

Descent, Approach and Landing


When you're familiar with modern Airbus aircraft for X-Plane, you know that before you reach TOD, you enter already the new assigned
altitude for your descent or when there's no ATC, you assign a new descent altitude you want to go to. Just enter the new altitude via the ALT
knob on the AFS (Auto Flight System) panel, and the moment you're at or nearby TOD, you click the ALT knob and the aircraft starts with the
descent. The only thing you need to do is nothing .... ok, perhaps when needed, you need to give some speedbrake, but when speedbrake or
drag is needed, you're informed of this via a green message on the PFD. You can, no, you must leave your fingers off from the TLs (Thrust
Levers). It's all done and calculated by computers.

This means that the engines go back to IDLE power although the TLA stays the same. They stay physically at the same position. Of course, if
you want, you can play around with the aircraft descent. You can select a certain vertical speed if you want, but then you're no longer in the
Managed mode. But once the lower altitude is reached, the Auto Flight system reverts back to the Managed mode. This can be seen on the
PFD FMA (Flight Mode Annunciator) and when you don't feel comfortable with this, then you click once more the ALT knob and the Auto
Flight systems levels off at that altitude and goes back to the Managed mode. It's all so easy and typically Airbus!

When I've reach the airport at around 50NM, I leave the flight plan as it is, click the HDG knob, and follow my own heading that should lead
me to runway 11. Normally, when there's ATC, ATC will tell you which heading to follow and even which altitude to descend to. You will
notice on the ND that the current HDG you're flying is not a straight green line while the intended flight plan is now green dotted. Handy in
case you lose the way, the last waypoint in my flight plan was BIKF11, representing runway 11. In other words, this last waypoint is always a
good "visual ND" reference.

If you want to, you can also decide to disconnect the AP and fly the aircraft towards the runway by hand. I decide to leave the AP connected,
descend to 4000 feet and turn my heading to 320. It's not a straight in approach, but I have to keep out of the hills. To keep my speed under the
control of Auto Thrust, I activate on either the MFD or MCDU the APPROACH mode. This will first reduce the airspeed to the green dot
speed, and after that with every slat/flap selection, it will reduce the speed accordingly.

In other words, no worries about the aircraft speed! Once I've turned into the bay, north east of the airport, I disconnect the AP, press the
APPR button on the glareshield and luckily for me, a LOC* appears in the PFD FMA. The only thing I need to do right now is just focus on
the PFD and the ND, which I switched to ILS ROSE mode. Although I've selected a 10NM visibility, I can see the runway including the PAPI
lights left of it.

18 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

One eye on the PFD, other eye focuses on PAPI. Good? No, this is not good. The PFD is directly in front of you and can be clearly monitored
and more securely, especially with airspeed of around 130-140 knots.

Aircraft termination and .....


Termination can be done in many ways, but the most elegant way is following the checklist and connecting the external power to the aircraft.
It won't take much time and it's more fun then just shutting down X-Plane. If you don't want to make such a long flight from mid-southern
France to Keflavik, you can also decide to fly from Dublin (EIDW) to Keflavik (BIKF). For both airports there are very nice, detailed and
accurate payware packages available. First, the Aerosoft airport scenery of Dublin International Airport. Curious what this Aerosoft Dublin
for X-Plane 10 looks like? Then you should check our comprehensive review at ASN X-Plane via this link. It's worth it! When you like it, you
can grab your copy at the dedicated Aerosoft sales page.

And second, Keflavik International Airport is also available from Aerosoft via this link.

And for those who prefer to fly a shorter flight, here's the "fms" flight plan from EIDW to BIKF. Create a text file, copy and paste the italic
content in this file and name it EIDWBIKF.fms.
I
3 version
0
19
1 EIDW 0 53.421400 -6.270000
11 ROTEV 0 54.028800 -6.066200
11 GOTNA 0 54.594700 -5.598100
11 BLACA 0 54.883300 -5.158900
11 TRN 0 55.313400 -4.783900
11 GOW 0 55.870500 -4.445700
11 FINDO 0 56.369200 -3.463600
11 VADNO 0 57.453100 -3.627200
11 PIPEM 0 58.156400 -3.738600
11 SOXON 0 58.968300 -3.872800
11 BAMRA 0 59.433300 -3.952800
11 GONUT 0 61.000000 -4.583300
11 MY 0 62.106900 -7.587700
11 LARUX 0 62.621700 -10.000000
11 ROSTI 0 63.406400 -14.112200
11 ING 0 63.803100 -16.638100
11 MIKLA 0 63.848300 -17.574200
11 NASBU 0 63.946700 -20.348100
1 BIKF 0 63.985000 -22.605600

A Small BIKF - BIKF Training


You could of course leave it as it is and end in a normal way your flight to Keflavik, but when you like it, I encourage you to do the following
practice. It's a flight from BIKF to BIKF, so nothing special. See it as a training flight where you try to fly manually from waypoint to
waypoint, only looking on your EFIS displays. You could of course set the visibility to CAT I, II or III, but that's entirely up to you.

The training flight starts from runway 11, and follows the following waypoints: KEILA - FJALL - RKF31 - MURTA - REKTU - OTRON
- KEF29 - VAKLO and finally try to make an ILS landing back at runway 11. Climb out to 4000 feet and stay at this altitude. When you pass
waypoint OTRON, descent to 2000 feet. Don't worry about Auto Thrust. Enter these waypoints in your MCDU or MFD and enter the
performance values too. When you've done all of this, takeoff from runway 11. Ok, you're allowed to connect the AP for flying to the first
waypoint, but then disconnect the AP and try with small corrections to follow the flight plan on the ND and keep the aircraft at an altitude of
4000 feet.

Believe me, you'll be surprised at your skills. The A350 seems a very easy aircraft to fly by hand. How real is it? No idea since I never flew an
A350 myself, but what I've heard from FBW Airbus pilots, it does fly very easily.

Come on, take the challenge and make this training flight yourself!

19 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

Ok, here's a suggestion ... climb out to 4000 feet and stay at this altitude. If you want, you can also climb to 6000 feet. In that case, don't forget
to set a higher altitude at the AFS panel. Keeping in mind the surrounding area, you won't pass any hills or mountains when you cruise at 4000
feet.

When you approach waypoint KEF29 at 5NM, descent to 2000 feet. To have the FD (Flight Director) helping you, select the ALT knob
previously already to 2000 feet and then pull the ALT button (DES) or push the ALT knob (OP DES). Also check on the MFD or MCDU if
you've selected for your planned landing runway 11 BIKF. How to do this on the MFD? Stay with the yellow X in the flight plan on BIKF,
click it once and select from the grey popup list "ARRIVAL". Select from the left hand dropdown list named "RWY 11 ILS".

When you have passed waypoint KEF29, press the APPR (approach) button on the AFS panel. For the rest, just follow the FDs and monitor
the PFD FMA too. And in case of doubts, check the on-board user guide.

Frame Rates
Frame rates, frame rates and even more frame rates. We all want to have 50 and some even higher. But is it really needed to have such high
frame rates since our eyes can't detect any faster then, lets say 30 FPS (Frames Per Second). Some say that we can't spot any faster then 25
FPS, others say 35 FPS. Ok, so how many frame rates do I get with the Flight Factor A350? No no, that's not so easy to answer. Your actual
frame rates depend on so many things like for instance your Windows, Linux or Mac computer.

Besides that, how much VRAM does it have, thus what's the graphical adapter's amount of memory and, not unimportantly, your PC or Mac

20 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

CPU. Oops, and also, when it comes to hardware, the monitor resolution. In other words; the higher your monitor resolution is - with X-Plane
running in full screen mode - the lower frame rates you will have. Not necessarily too low FPS, but just less than when having a lower screen
resolution. The amount of system memory is also an interesting item, but doesn't really influence the frame rates, but the more system
memory you have, the better it is, but that's not something new.

And, unless I've forgotten something, your X-Plane Rendering Settings are very important and could, indeed will, influence the frame rates
too. And remember, it's not always needed to set every option in the Rendering Settings to ‘high'. Try to find a balance! And finally, what
can influence your frame rates more? The complexity of the aircraft which is certainly also applicable to the Flight Factor A350. But the
weather could be an issue too or the installed airport scenery, and what about if you're in the flight deck or hovering around the aircraft? All
kinds of issues will influence the frame rates.

I can tell you that with the aircraft still at FL330, some clouds below me, sitting on the captain's seat in 3D cockpit mode, I have roughly
25-30FPS. Low? Not really knowing my XP Rendering Options (see below). When I hover outside the aircraft, the FPS moves up, not
strange, to 50-80 FPS depending on the angle I'm looking at the aircraft and the environmental conditions. By the way, all these figures are
based on daylight conditions.

Upon approaching BIKF with default X-Plane scenery around me, the frame rates drop to 20-25 FPS. After landing and taxiing to the apron,
is goes to the safe value of 19.9 FPS, but I tell you that's also because of the high settings in my Rendering Options.

Am I satisfied with the frame rates?


Yes, I am. I'm aware that my X-Plane settings are high, perhaps higher then needed, but I want to see things around and below me as real as
possible.

Summary
With such a review, is it then needed to add a summary right here? Perhaps it is, since a summary should help those who don't want to read the
whole review. That said, let me try to write down a couple of things. The modeled Flight Factor A350 is the Airbus A350-900 series. The
Advanced model comes with a lot of features and although the FMS isn't fully functional and no Navigraph or NavDataPro AIRAC DB is
used, it still offers a lot of possibilities to make every flight a success.

The external 3D model represents without doubt a nice replica of the real Airbus A350. The base package comes with 7 liveries of which 3 are
real, at least at the time of writing in November 2014. There's also a paintkit included for those who have painting skills and others who have
"livery" wishes. The aircraft comes not only with a detailed 3D cockpit, but also with a virtual cabin. Although the heart of the modeling goes
to the flight deck, the virtual cabin does look attractive.

Flying the modeled Airbus A350 seems not very difficult, but as I've heard from real Airbus pilots, FBW (Fly-by-Wire) controlled aircraft
with of course the sidestick in place, are not complicated to fly. That said, you need to practice flying the A350 by hand, but a good joystick,
for example the Saitek X52 Pro or the X55 Rhino, will make manual flying a success. Using the touchscreen OIS and MFD is fun and gives
you really the feeling you're inside the A350. And no, the Advanced A350 doesn't come with a taxi camera, perhaps later since this is a very
nice real and simulated feature. But other camera features aren't implemented. I mentioned this briefly before; the A350 has the realistic FBW
plugin implemented provided by QPAC.

Do I know if the modeled A350 flies as real as it gets? No idea since I'm not an licensed A350-900 pilot, but we all know that the QPAC FBW
plugin has a great reputation since this plugin is based on real Level-D simulator data. Some people can confirm this nearly flawless FBW
behavior since they had the opportunity to fly an A320 Level-D FFS (Full Flight Simulator) at the Lufthansa Flight Training Center in
Frankfurt.

There's a lot to learn about the Flight Factor A350, and there's a lot to check out while flying. Many aircraft systems are simulated as well as
the ECAM system. Is it a worthy X-Plane 10 add-on? Yes, without doubt a worthy a Airbus add-on, especially for those who love Airbus
aircraft, like me! For those who are stuck to Boeing aircraft, I would say ... give it a try and see for yourself how magnificently an Airbus
aircraft flies.

And did I cover everything?


I think I covered most of the Flight Factor aero A350, but as you know, it's always possible I've forgotten something. In case you've a different
experience or want to share issues or thoughts with me, feel free to contact me. You can reach me via email address
Angelique.van.Campen@gmail.com.

More information about the Flight Factor Airbus A350 as well as buying details can be found at the dedicated X-Plane.Org web page. For the
livery packs, just follow this link.

For this review I used several add-on freeware and payware products, besides of course the Flight Factor aero Airbus A350-900 Series. The
used add-ons are:
- Freeware | X-Plane Freeware Forum Reykjavik (BIRK)
- Freeware | X-Mapper Lite

21 of 22 08-12-2020, 20:39
Firefox https://www.flightfactor.aero/review/A350.html

- Pay ware | Aerosoft Keflavik International Airport (BIKF)


- Pay ware | Aerosoft Toulouse/Blagnac (LFBO)
- Pay ware | Aerosoft Dublin International Airport (EIDW)

I would like to thank a couple of persons, who offered me some advice. First I would like to thank Marcelo Alencar, active captain flying for
Qatar. Also thanks to Michael Lisiewicz, who offered some thoughts for this review. And above all, I would like to thank Roman Bezerin
from Flight Factor and QPAC.

With Greetings,
Angelique van Campen

[/raw]

22 of 22 08-12-2020, 20:39

You might also like