Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 194 views

    (As Listed in The Respective TR) Program: Electrical Installation and Maintenance NC Ii

    Uploaded by

    Rommel Selga
    This document is a list of consumables and materials required for an Electrical Installation and Maintenance NC II program, as well as quantities needed and available. It shows that the required quantities of all listed items were available on site during an inspection. The list contains over 50 individual items needed for the program, including components for wiring, safety equipment, and tools. The inspector confirmed all quantities were as specified.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    (As Listed in The Respective TR) Program: Electrical Installation and Maintenance NC Ii

    Uploaded by

    Rommel Selga
    194 views2 pages
    This document is a list of consumables and materials required for an Electrical Installation and Maintenance NC II program, as well as quantities needed and available. It shows that the required quantities of all listed items were available on site during an inspection. The list contains over 50 individual items needed for the program, including components for wiring, safety equipment, and tools. The inspector confirmed all quantities were as specified.

    Original Title

    2b. TESDA-OP-CO-01-F15 CONSUMABLES

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a list of consumables and materials required for an Electrical Installation and Maintenance NC II program, as well as quantities needed and available. It shows that the required quantities of all listed items were available on site during an inspection. The list contains over 50 individual items needed for the program, including components for wiring, safety equipment, and tools. The inspector confirmed all quantities were as specified.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    194 views2 pages

    (As Listed in The Respective TR) Program: Electrical Installation and Maintenance NC Ii

    Uploaded by

    Rommel Selga
    This document is a list of consumables and materials required for an Electrical Installation and Maintenance NC II program, as well as quantities needed and available. It shows that the required quantities of all listed items were available on site during an inspection. The list contains over 50 individual items needed for the program, including components for wiring, safety equipment, and tools. The inspector confirmed all quantities were as specified.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 2

    TESDA-OP-CO-01-F15

    (Rev.No.00-03/08/17)

    LIST OF CONSUMABLES/MATERIALS
    (As listed in the respective TR)

    Program: ELECTRICAL INSTALLATION AND MAINTENANCE NC II


    Name of TVI/Company: Southeastern Mindanao Institute of Technology (SMIT), Inc.
    List of Specification Quantity Quantity Difference Inspectors
    Consumables/ Required on Site (5) Remarks
    Materials (2) (3) (4) (6)
    (1)
    RSC/IMC 25 pcs 25 pcs
    Entrance cap 5 pcs 5 pcs
    Locknut & 50 pairs 50 pairs
    bushing
    Ground fault 5 pcs 5 pcs
    current
    interrupting
    device (GFCI)
    3/16’ x 1” metal 100 pcs 100 pcs
    screw
    Conduit 50 pcs 50 pcs
    strap/clamp
    Wiring boards, 5 sets 5 sets
    ¾ ft. x 4 ft. x 8
    ft.
    Floor outlet 10 pcs 10 pcs
    Working gloves 25 pcs 25 pcs
    Safety shoes 10 pairs 10 pairs
    Hard hat 10 pcs 10 pcs
    Safety goggles 10 pcs 10 pcs
    Wire AWG #12 5 boxes 5 boxes
    (3.5mm2)
    Wire AWG #14 5 boxes 5 boxes
    (2.0mm2)
    Electrical tape 5 rolls 5 rolls
    Wood screw ½” 1 box 1 box
    x8
    Receptacle 25 pcs 25 pcs
    surface type
    Receptacle 25 pcs 25 pcs
    flush type
    Incandescent 25 pcs 25 pcs
    bulb 50 w/ 250v
    AC
    Convenient 25 pcs 25 pcs
    outlet c.o.
    (grounding
    type,/ flush
    type) 2 gang
    with plate and
    cover
    PVC square 10 pcs 10 pcs
    box, 4x 4
    Flexible conduit 25 pcs 25 pcs
    ½,¾
    PVC conduit, ½ 10 pcs 10 pcs
    ,¾
    Junction box 25 pcs 25 pcs
    PVC
    Utility box 25 pcs 25 pcs
    Connectors 50 pcs 50 pcs
    PVC 1/2
    Connectors 50 pcs 50 pcs
    PVC ¾
    Connectors 50 pcs 50 pcs
    RSC, ¾
    Elbow PVC, ½ 20 pcs 20 pcs
    Elbow PVC, ¾ 20 pcs 20 pcs
    Elbow RSC, ½ 20 pcs 20 pcs
    Elbow RSC, ¾ 20 pcs 20 pcs
    Panel board 5 sets 5 sets
    with 70 amp
    main and 4
    branch ckt.
     20
    amps, 2
    pcs.
     15
    amps, 2
    pcs.
    Switch (3 way 10 pcs 10 pcs
    with plate and
    cover)
    Switch (single 10 pcs 10 pcs
    pole with plate
    and cover
    Note: Columns 1-4 to be filled out by Institution; Columns 5-6 to be filled out by PO/Expert
    Continue in additional sheet
    Submitted by: Attested by:

    DONNA LYN L. TONZO ROMMEL A. SELGA, DBM


    TVI/Company Representative TVI/Company Head
    Date: Date:
    Inspected by:

    PO UTPRAS Focal Person Expert


    Date: Date:

    You might also like