Valve and Valve Spring Specifications

3306 Industrial Engine 64Z05381-UP(SEBP1989 - 24) - Estructura del documento Página 1 de 21
Cerrar SIS
Pantalla anterior
Producto: ENGINE - MACHINE

Modelo: 3306 ENGINE - MACHINE 64Z
Configuración: 3306 Industrial Engine 64Z05381-UP
Pautas de reutilización y recuperación

Valve and Valve Spring Specifications{1000, 1100, 1105, 1108}
Número de medio -SEBF8034-13 Fecha de publicación -27/09/2007 Fecha de actualización -27/09/2007
i02753086
Valve and Valve Spring Specifications{1000, 1100, 1105, 1108}

SMCS - 1000; 1100; 1105; 1108
Engine:Commercial All
Engine:Truck All
Industrial Engine:with Turbochargers All
Machine Engines: All
Marine Engine:with Turbochargers All
Introduction
This Reuse and Salvage Guideline contains the necessary information in order to allow a dealer to establish a parts
reusability program. Reuse and salvage information enables Caterpillar dealers and customers to benefit from cost
reductions. Every effort has been made in order to provide the most current information that is known to Caterpillar.
Continuing improvement and advancement of product design might have caused changes to your product which are
not included in this publication. This Reuse and Salvage Guideline must be used with the latest technical information
that is available from Caterpillar.
For additional information about this guideline, consult Repair Process Engineering of the Marketing & Product
Support Division at 1 (309) 675-5434.
Summary
This guideline contains the specifications for wear for Caterpillar valves and valve springs that can be used again.
Refer to Reuse and Salvage Guideline, SEBF8002, "Valves, Valve Springs, Valve Rotocoils and Locks" and Reuse
and Salvage Guideline, SEBF8162, "Procedure to Measure and Salvage Cylinder Head Assemblies and Related
Components".
Safety
When replacement parts are required for this product Caterpillar

recommends using Caterpillar replacement parts or parts with
equivalent specifications including, but not limited to, physical
dimensions, type, strength and material.
Failure to heed this warning can lead to premature failures, product

damage, personal injury or death.
References
ReferenceReuse and Salvage Guideline, SEBF8002, "Valves, Valve Springs, Valve Rotocoils and Locks"
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/s... 18/06/2008
ReferenceReuse and Salvage Guideline, SEBF8162, "Procedure to Measure and Salvage Cylinder Head Assemblies
and Related Components"
ReferenceReuse and Salvage Guideline, SEBF9006, "Specifications for Cylinder Head Assemblies on C-Series
Engines"
Measuring Valves and Cleaning Valves

Refer to Reuse and Salvage Guideline, SEBF8002, "Valves, Valve Springs, Valve Rotocoils and Locks" for the
procedures in order to measure the valves and clean the valves. 6V-0087 Valve Stem Gauge Gp should be used in
order to measure the valve stems for reusability. 6V-0087 Valve Stem Gauge Gp is only available for certain sizes of
valve stems. For the other sizes of valve stems, use a micrometer in order to measure the valve stem.
Specifications of the Valves
Illustration 1 g01400727
(A) Stem diameter
(B) Thickness of the lip
(C) Diameter of the head
(D) Angle of the face
Table 1
Specifications for the Inlet Valves

Part Minimum Minimum Angle of the
Engine Diameter of
Bore Size Number of Stem Thickness of Face
Model the Head
the Valve Diameter (1) the Lip (Degrees)
145.000 mm
C32
(5.709 inch)
C27 137.700 m m
153-7023 60.75
(5.421 inch)
C18
C-18
145.000 mm 9.408 mm 2.75 mm 47.00 mm
(5.709 inch) (0.3704 inch) (0.108 inch) (1.850 inch)
C-16 140.000 mm
(5.512 inch)
C15
137.200 mm
C-15
(5.402 inch)
C32 145.000 mm
(5.709 inch) 44.98 mm
164-2543 9.408 mm 2.33 mm 60.75
(1.771 inch)
(0.3704 inch) (0.092 inch)
C30 145.000 mm
(5.709 inch)
C18
145.000 mm
C-18
(5.709 inch)
47.00 mm
C-16 140.000 mm 236-5605 9.408 mm 2.75 mm 60.75
(1.850 inch)
(5.512 inch) (0.3704 inch) (0.108 inch)
C15
137.200 mm
C-15
(5.402 inch)
C13
252-7802 44.50 mm
C-13 130.000 mm 9.408 mm 2.46 mm 60.75
224-3028 (1.752 inch)
C11 (5.118 inch) (0.3704 inch) (0.097 inch)
C12
130.000 mm 157-0672
C-12
(5.118 inch) 7E-9578 45.00 mm
9.408 mm 2.35 mm 60.75
192-9213 (1.772 inch)
(0.3704 inch) (0.093 inch)
C-10 125.000 mm 136-4336
(4.9213 inch)
C12
130.000 mm
C-12
(5.118 inch) 45.00 mm
124-2692 9.408 mm 2.52 mm 60.75
(1.772 inch)
(0.3704 inch) (0.099 inch)
C-10 125.000 mm
(4.9213 inch)
163-2442
262-2957 2.03 mm
241-8382 (0.080 inch) 36.00 mm
9.408 mm 65.75
(1.417 inch)
C9 (0.3704 inch)
187-4123 1.86 mm
C-9 112.000 mm
(0.073 inch)
(4.4094 inch)
1.81 mm 39.00 mm
242-1542 7.962 mm 60.50
(0.0713 inch) (1.535 inch)
(0.3135 inch)
145-7390
2.04 mm
110.000 mm 7.962 mm (0.080 inch) 40.00 mm

(4.3307 inch) (0.3135 inch) (1.575 inch)
C7 157-7129 60.25
1.87 mm
252-7801
(0.074 inch)
280.025 ± 0.025 90.00 mm

3618 180-9044 15.939 mm 5.21 mm 69.75
mm (11.0246 ± (3.543 inch)
(0.6275 inch) (0.205 inch)
0.0010 inch)
144-9992 4.78 mm 45.00

(0.188 inch)
90.00 mm
15.939 mm
3616 (3.543 inch)
(0.6275 inch)
3612 280.025 ± 0.025 7C-2422 4.79 mm 59.75
3608 mm (11.0246 ± (0.189 inch)
3606 0.0010 inch)
44.98 mm
115-2368 9.408 mm 2.49 mm 60.75
(1.771 inch)
(0.3704 inch) (0.098 inch)
3616
3612
280.025 ± 0.025
3608
mm (11.0246 ±
3606
0.0010 inch) 90.00 mm
C280 9Y-6232 15.939 mm 4.79 mm 59.75
(3.543 inch)
(0.6275 inch) (0.189 inch)
G3600 300.025 ± 0.025
Series mm (11.8120 ±
0.0010 inch)
3616
3612
280.025 ± 0.025
3608
mm (11.0246 ±
3606
0.0010 inch) 90.00 mm
C280 4P-2854 15.939 mm 5.21 mm 69.75
(3.543 inch)
(0.6275 inch) (0.205 inch)
G3600 300.025 ± 0.025
0.0010 inch)
3600 280.025 ± 0.025 90.00 mm

4P-3079 15.939 mm 4.79 mm 59.75
Series mm (11.0246 ± (3.543 inch)
(0.6275 inch) (0.189 inch)
0.0010 inch)
G3600 300.025 ± 0.025 90.00 mm

206-7953 15.939 mm 4.61 mm 69.75
Series mm (11.8120 ± (3.543 inch)
(0.6275 inch) (0.182 inch)
0.0010 inch)
3500 170.025 ± 0.025 56.00 mm

102-9102 9.408 mm 3.46 mm 70.25
Series mm (6.6939 ± (2.205 inch)
(0.3704 inch) (0.136 inch)
0.0010 inch)
3500
Series
G3520B 210-2542 70.60
G3520 170.025 ± 0.025 56.00 mm
G3516B mm (6.6939 ± 9.408 mm 3.46 mm (2.205 inch)
G3516 0.0010 inch) (0.3704 inch) (0.136 inch)

G3512
G3508
3516B
3512B
3508B
3516 170.025 ± 0.025 56.00 mm
104-7184 9.408 mm 3.94 mm 70.75
3512 mm (6.6939 ± (2.205 inch)
(0.3704 inch) (0.155 inch)
3508 0.0010 inch)
G3500
Series
3516
170.025 ± 0.025 56.00 mm
3512 7C-5188 9.408 mm 3.23 mm 59.50
mm (6.6939 ± (2.205 inch)
3508 (0.3704 inch) (0.127 inch)
0.0010 inch)
3412
3408B
137.185 ± 0.025 212-0932 44.98 mm
3406 9.408 mm 2.81 mm 70.75
mm (5.4010 ± 122-7353 (1.771 inch)
G3400 (0.3704 inch) (0.111 inch)
0.0010 inch)
Series
3412
3408B
3406 137.185 ± 0.025 44.98 mm
4W-5374 9.408 mm 2.56 mm 60.75
G3412 mm (5.4010 ± (1.771 inch)
(0.3704 inch) (0.101 inch)
G3408 0.0010 inch)
G3406
3412E
137.185 ± 0.025
3412C
mm (5.4010 ±
3412
0.0010 inch) 44.98 mm
164-2543 9.408 mm 2.33 mm 60.75
(1.771 inch)
(0.3704 inch) (0.092 inch)
145.000 ± 0.025
3412D
mm (5.7087 ±
0.0010 inch)
139.685 ± 0.025
3456
mm (5.4994 ±
0.0010 inch) 47.00 mm
153-7023 9.408 mm 2.75 mm 60.75
(1.850 inch)
(0.3704 inch) (0.108 inch)
137.185 ± 0.025
3406E
mm (5.4010 ±
0.0010 inch)
139.685 ± 0.025
3456
mm (5.4994 ±
0.0010 inch) 47.00 mm
152-8380 9.408 mm 3.02 mm 60.75
(1.850 inch)
(0.3704 inch) (0.119 inch)
137.185 ± 0.025
3406E
mm (5.4010 ±
0.0010 inch)
139.685 ± 0.025
3456
mm (5.4994 ± 184-1194 60.75
0.0010 inch)
9.408 mm 1.75 mm 47.00 mm
(0.3704 inch) (0.069 inch) (1.850 inch)

137.185 ± 0.025
3406E
mm (5.4010 ±
0.0010 inch)
3412E
3412C
3412
3408E 137.185 ± 0.025
3408C mm (5.4010 ±
3408B 0.0010 inch) 44.98 mm
3408 122-0322 9.408 mm 2.49 mm 60.75
(1.771 inch)
3406C (0.3704 inch) (0.098 inch)
145.000 ± 0.025
3412D
mm (5.7087 ±
0.0010 inch)
3412C
3412
3408C
3408B 137.185 ± 0.025
3408 mm (5.4010 ±
3406C 0.0010 inch) 44.98 mm
3406B 115-2368 9.408 mm 2.46 mm 60.75
(1.771 inch)
3406 (0.3704 inch) (0.097 inch)
145.000 ± 0.025
3412D
mm (5.7087 ±
0.0010 inch)
3300 120.675 ± 0.025

0.0010 inch) 51.31 mm
100-7860 9.408 mm 2.02 mm (0.08 60.75
(2.020 inch)
1673 (0.3704 inch) inch)
D333 114.3 mm (4.50
D330 inch)
3300
Series 120.675 ± 0.025
G3300 mm (4.7510 ±
Series 0.0010 inch) 51.31 mm
2W-2621 9.408 mm 2.67 mm 60.75
(2.020 inch)
1673 (0.3704 inch) (0.105 inch)
D333 114.3 mm (4.50
D330 inch)
G3300 120.675 ± 0.025 7W-7490 51.31 mm

9.408 mm 2.67 mm 60.75
Series mm (4.7510 ± 4W-1670 (2.020 inch)
(0.3704 inch) (0.105 inch)
0.0010 inch)
120.675 ± 0.025
3306
mm (4.7510 ±
0.0010 inch) 48.13 mm
9L-3160 9.408 mm 2.66 mm 60.45
(1.895 inch)
(0.3704 inch) (0.105 inch)
1673
114.3 mm (4.50
D333
inch)
120.675 ± 0.025
3306 mm (4.7510 ±
0.0010 inch) 48.13 mm
3N-0514 9.408 mm 2.66 mm 60.45
(1.895 inch)
1673 (0.3704 inch) (0.105 inch)
114.3 mm (4.50
D333
inch)
3200 53.19 mm
114.3 mm (4.50 9L-7682 9.423 mm 1.84 mm 60.00
Series (2.094 inch)
inch) (0.3710 inch) (0.072 inch)
53.19 mm
3204 114.3 mm (4.50 8N-5645 9.408 mm 1.84 mm 60.00
(2.094 inch)
inch) (0.3704 inch) (0.072 inch)
48.13 mm
3204 114.3 mm (4.50 9N-0180 9.425 mm 1.63 mm 60.00
(1.895 inch)
inch) (0.3711 inch) (0.064 inch)
53.19 mm
3208 114.3 mm (4.50 7C-0362 9.423 mm 2.00 mm 60.00
(2.094 inch)
inch) (0.3710 inch) (0.079 inch)
130.037 ± 0.037
3196
mm (5.1196 ±
0.0015 inch)
3176C 125.037 ± 0.037

3176B mm (4.9227 ± 192-9213
0.0015 inch) 45.00 mm
157-0672 9.408 mm 2.35 mm 60.75
(1.772 inch)
7E-9578 (0.3704 inch) (0.093 inch)
125.025 ± 0.025
3176
mm (4.9222 ±
0.0010 inch)
3126E
110.0 mm (4.33
3126B
inch)
3126 110.0 mm (4.33

inch) 47.00 mm
163-2431 7.963 mm 1.87 mm 60.25
(1.850 inch)
(0.3135 inch) (0.074 inch)
3116 105.0 mm (4.13
inch)
3126 110.0 mm (4.33

inch) 161-4280 47.00 mm
7.963 mm 1.96 mm 60.25
7W-8064 (1.850 inch)
3116 (0.3135 inch) (0.077 inch)
105.0 mm (4.13
3114
inch)
3126B 110.0 mm (4.33 157-7129 7.963 mm 1.87 mm 40.00 mm 60.25

inch) (0.3135 inch) (0.074 inch) (1.575 inch)
3126 145-7390 40.00 mm

110.0 mm (4.33 7.963 mm 2.04 mm 60.25
Series 141-4317 (1.575 inch)
inch) (0.3135 inch) (0.080 inch)
3160
3150
3145
53.19 mm
1160 114.3 mm (4.50 9L-7682 9.423 mm 1.85 mm 60.00
(2.094 inch)
1150 inch) (0.3710 inch) (0.073 inch)
1145
1140
42.55 mm
4F-5856 11.02 mm 0.68 mm 45.75
(1.675 inch)
(0.434 inch) (0.027 inch)
D311 101.6 mm (4.00
inch)
41.99 mm
7F-2455 11.05 mm 1.87 mm 60.25
(1.653 inch)
(0.435 inch) (0.074 inch)
D320 43.08 mm
101.6 mm (4.00 9H-4811 9.408 mm 2.03 mm 60.50
D311 (1.696 inch)
inch) (0.3704 inch) (0.080 inch)
3160
3150
3145
53.19 mm
1160 114.3 mm (4.50 9L-7682 9.425 mm 1.84 mm 60.00
(2.094 inch)
1150 inch) (0.3711 inch) (0.072 inch)
1145
1140
45.97 mm
1404 114.3 mm (4.50 7N-0359 7.85 mm (0.309 1.73 mm 60.38
(1.810 inch)
inch) inch) (0.068 inch)
48.13 mm
9H-5830 9.408 mm 2.38 mm 60.50
(1.895 inch)
D315 (0.3704 inch) (0.094 inch)
D330 114.3 mm (4.50
D318 inch)
51.51 mm
6H-3026 11.05 mm 1.19 mm 45.50
(2.028 inch)
(0.435 inch) (0.047 inch)
1676 36.32 mm
114.3 mm (4.50 7S-2514 7.833 mm 1.99 mm 45.50
D336 (1.430 inch)
inch) (0.3084 inch) (0.078 inch)
1673
1670 48.13 mm
114.3 mm (4.50 7M-7358 9.408 mm 2.38 mm 60.50
D333 (1.895 inch)
inch) (0.3704 inch) (0.094 inch)
D330
1673
9L-3160 48.13 mm 60.50
D333
114.3 mm (4.50 9.408 mm 2.38 mm (1.895 inch)
inch) (0.3704 inch) (0.094 inch)
1676
114.3 mm (4.50
D336
inch) 36.32 mm
2S-8143 7.833 mm 1.99 mm 45.50
(1.430 inch)
1674 (0.3084 inch) (0.078 inch)
120.7 mm (4.75
D334
inch)
D337 53.98 mm
130.0 mm (5.12 7H-6891 12.55 mm 2.27 mm 60.50
D326 (2.125 inch)
inch) (0.494 inch) (0.089 inch)
1693
D349
44.98 mm
D348 137.2 mm (5.40 1N-4885 9.408 mm 2.04 mm 45.50
(1.771 inch)
D346 inch) (0.3704 inch) (0.080 inch)
D343
1693
D349 44.98 mm
137.2 mm (5.40 1N-4886 9.408 mm 2.04 mm 45.50
D348 (1.771 inch)
inch) (0.3704 inch) (0.080 inch)
D343
D349 44.98 mm
137.2 mm (5.40 4N-9623 9.408 mm 2.55 mm 60.50
D348 (1.771 inch)
inch) (0.3704 inch) (0.100 inch)
D375
D364 59.51 mm
146.1 mm (5.75 8H-1993 12.55 mm 4.00 mm 45.50
D342 (2.343 inch)
inch) (0.494 inch) (0.158 inch)
D339
59.51 mm
D342 146.1 mm (5.75 1W-1818 9.408 mm 4.00 mm 45.50
(2.343 inch)
inch) (0.3704 inch) (0.158 inch)
63.63 mm
7M-7817 12.55 mm 3.82 mm 60.50
D399 (2.505 inch)
(0.494 inch) (0.150 inch)
D398
158.8 mm (6.25
D379
inch)
D353 63.63 mm
1W-8606 9.408 mm 3.84 mm 60.50
(2.505 inch)
(0.3704 inch) (0.151 inch)
(1) Measure the top and the bottom areas of wear.
Table 2
Specifications for the Exhaust Valves

Part Minimum Minimum Angle of the
Engine Diameter of
Bore Size Number of Stem Thickness of Face
Model the Head
the Valve Diameter (1) the Lip (Degrees)
C32 153-7024 2.05 mm

145.000 mm 9.408 mm (0.081 inch) 45.75
(5.71 inch) (0.3704 inch) 41.81 mm
(1.646 inch)
C32 1.99 mm
164-2542
C30 (0.078 inch)
C27 137.700 mm
(5.4212 inch)
C18
145.000 mm
C-18
(5.71 inch) 41.81 mm
153-7024 9.408 mm 2.05 mm 45.75
(1.646 inch)
(0.3704 inch) (0.081 inch)
C-16 140.000 mm
(5.5118 inch)
C15
137.200 mm
C-15
(5.4016 inch)
248-1467 1.94 mm
C13 (0.076 inch) 41.50 mm
C-13 130.000 mm 9.408 mm 45.75
(1.634 inch)
C11 (5.1181 inch) (0.3704 inch)
224-3030 2.14 mm
(0.084 inch)
C12
130.000 mm 124-2693
C-12
(5.1181 inch) 7C-1586 42.00 mm
9.408 mm 1.94 mm 45.75
157-0671 (1.654 inch)
(0.3704 inch) (0.076 inch)
C-10 125.000 mm 133-7029
(4.9213 inch)
246-9855
36.00 mm
241-8383 9.408 mm
(1.417 inch)
188-3122 (0.3704 inch)
C9
112.000 mm 1.62 mm 45.75
C-9
(4.409 inch) (0.064 inch)
37.50 mm
255-8676 7.962 mm
(1.476 inch)
(0.3135 inch)
157-7130 1.60 mm
(0.063 inch) 43.00 mm
C7 110.000 mm 9.408 mm 45.00
(1.693 inch)
(4.3307 inch) (0.3704 inch)
147-8211 1.63 mm
(0.064 inch)
3616 201-8114 4.80 mm 60.13

3612 280.025 ± 0.025 (0.189 inch) 90.00 mm
15.939 mm
3608 mm (11.0246 ± (3.543 inch)
(0.6275 inch)
3606 0.0010 inch) 144-9992 4.78 mm 45.00
(0.188 inch)
3616
3612
280.025 ± 0.025
3608
mm (11.0246 ± 9Y-6232 59.75
3606
0.0010 inch)
C280 90.00 mm
15.939 mm 4.79 mm (3.543 inch)
(0.6275 inch) (0.189 inch)

G3600 300.025 ± 0.025
0.0010 inch)
3600 280.025 ± 0.025 90.00 mm

4P-3079 15.939 mm 4.79 mm 30.25
Series mm (11.0246 ± (3.543 inch)
(0.6275 inch) (0.189 inch)
0.0010 inch)
185-1103 5.61 mm
G3600 300.025 ± 0.025 (0.221 inch) 90.00 mm
15.939 mm 69.75
Series mm (11.8120 ± (3.543 inch)
(0.6275 inch)
0.0010 inch) 154-2417 6.12 mm
(0.241 inch)
3500 170.025 ± 0.025 194-4897 (2) 56.00 mm

12.558 mm 3.22 mm 45.60
Series mm (6.6939 ± (2.205 inch)
(0.4944 inch) (0.127 inch)
0.0010 inch)
3516B
3512B
3508B
3516 170.025 ± 0.025 56.00 mm
104-7184 9.408 mm 3.94 mm 70.75
3512 mm (6.6939 ± (2.205 inch)
(0.3704 inch) (0.155 inch)
3508 0.0010 inch)
G3500
Series
3412
Series
3408 137.185 ± 0.025 41.81 mm
115-2367 9.408 mm 1.99 mm 45.75
Series mm (5.4010 ± (1.646 inch)
(0.3704 inch) (0.078 inch)
3406 0.0010 inch)
Series
3412 137.185 ± 0.025 41.81 mm

164-2542 9.408 mm 1.99 mm 45.75
Series mm (5.4010 ± (1.646 inch)
(0.3704 inch) (0.078 inch)
0.0010 inch)
139.685 ± 0.025
3456
mm (5.4994 ±
0.0010 inch) 153-7024 2.05 mm 41.81 mm
9.408 mm 45.75
152-7585 (0.0807 inch) (1.646 inch)
(0.3704 inch)
137.185 ± 0.025
3406E
mm (5.4010 ±
0.0010 inch)
3412
Series
137.185 ± 0.025 1.99 mm 41.81 mm
3408 122-0321 9.408 mm 45.75
mm (5.4010 ± (0.0783 inch) (1.646 inch)
Series (0.3704 inch)
0.0010 inch)
3406C
G3400 137.185 ± 0.025 212-0933 41.81 mm

9.408 mm 2.81 mm 70.75
Series mm (5.4010 ± 101-8314 (1.646 inch)
(0.3704 inch) (0.111 inch)
0.0010 inch)
G3412C
G3412 137.185 ± 0.025 41.81 mm

212-0935
G3408C mm (5.4010 ± 9.408 mm 3.37 mm (1.646 inch) 70.75
100-4639
G3408 0.0010 inch) (0.3704 inch) (0.133 inch)
G3412
137.185 ± 0.025 41.81 mm
G3408 2W-2443 9.408 mm 2.56 mm 60.75
mm (5.4010 ± (1.646 inch)
G3406 (0.3704 inch) (0.101 inch)
0.0010 inch)
148-7455 2.11 mm 60.75

3300 120.675 ± 0.025 (0.083 inch) 48.16 mm
9.408 mm
Series mm (4.7510 ± (1.896 inch)
(0.3704 inch)
0.0010 inch) 8N-0875 2.67 mm 60.50
(0.105 inch)
120.675 ± 0.025 44.98 mm

3306 3N-0516 9.408 mm 3.95 mm 70.50
mm (4.7510 ± (1.771 inch)
(0.3704 inch) (0.156 inch)
0.0010 inch)
120.675 ± 0.025
3306
mm (4.7510 ±
0.0010 inch) 48.16 mm
8N-0241 9.408 mm 2.67 mm 60.50
(1.896 inch)
(0.3704 inch) (0.105 inch)
D333 114.3 mm (4.50
inch)
G3300 120.675 ± 0.025 7W-7491 48.16 mm

9.408 mm 2.67 mm 60.50
Series mm (4.7510 ± 2W-2877 (1.896 inch)
(0.3704 inch) (0.105 inch)
0.0010 inch)
9.408 mm
119-6772 (2)
3200 (0.3704 inch) 45.82 mm
114.3 mm (4.50 9L-7683 (2) 1.28 mm 45.00
Series (1.804 inch)
inch) (0.050 inch)
9.373 mm
(0.3690 inch)
3126 110.0 mm (4.33

inch) 40.00 mm
163-2432 7.963 mm 1.48 mm 45.00
(1.575 inch)
3116 (0.3135 inch) (0.058 inch)
105.0 mm (4.13
3114
inch)
3126 110.0 mm (4.33

inch) 40.00 mm
136-0819 7.963 mm 1.48 mm 45.00
(1.575 inch)
3116 (0.3135 inch) (0.058 inch)
105.0 mm (4.13
3114
inch)
9.408 mm
157-7130 (2) (0.3704 inch) 43.00 mm
3126B 110.0 mm (4.33 1.60 mm 45.00
(1.693 inch)
inch) (0.063 inch)
9.373 mm
(0.3690 inch)
3126 43.00 mm
110.0 mm (4.33 147-8211 9.408 mm 1.63 mm 45.00
Series (1.693 inch)
inch) (0.3704 inch) (0.064 inch)
130.037 ± 0.037
3196
mm (5.1196 ±
0.0015 inch)
3176C 125.037 ± 0.037

3176B mm (4.9227 ±
0.0015 inch) 157-0671 42.00 mm
9.408 mm 1.94 mm 45.75
133-7029 (1.654 inch)
(0.3704 inch) (0.076 inch)
125.025 ± 0.025
3176
mm (4.9222 ±
0.0010 inch)
3126E
110.0 mm (4.33
3126B
inch)
9.408 mm
3160
9L-7683 (2) (0.3704 inch) 45.82 mm
3150 114.3 mm (4.50 1.28 mm 45.00
(1.804 inch)
3145 inch) (0.050 inch)
9.373 mm
(0.3690 inch)
3126E 41.50 mm
110.0 mm (4.33 224-3030 9.433 mm 2.14 mm 45.75
3126B (1.634 inch)
inch) (0.3714 inch) (0.084 inch)
D315 114.3 mm (4.50

inch) 1.21 mm 41.99 mm
7F-2454 11.049 mm 45.75
(0.0480 inch) (1.653 inch)
(0.4350 inch)
D311 101.6 mm (4.00
inch)
D315 114.3 mm (4.50

inch) 42.55 mm
4F-2719 10.998 mm 0.68 mm 45.75
(1.675 inch)
(0.4330 inch) (0.027 inch)
D311 101.6 mm (4.00
inch)
2.03 mm 39.99 mm
D311 101.6 mm (4.00 1M-0982 9.408 mm 60.50
(0.0800 inch) (1.574 inch)
inch) (0.3704 inch)
D320 39.99 mm
101.6 mm (4.00 2M-7727 9.408 mm 2.24 mm 60.50
D311 (1.574 inch)
inch) (0.3704 inch) (0.088 inch)
D318
114.3 mm (4.50
D315 4F-0212 45.50
inch)
46.73 mm
11.05 mm 1.22 mm (1.840 inch)
(0.435 inch) (0.048 inch)

D3400 95.3 mm (3.75
inch)
D318 46.73 mm
114.3 mm (4.50 6H-4110 11.00 mm 1.21 mm 45.50
D315 (1.840 inch)
inch) (0.433 inch) (0.048 inch)
D333
114.3 mm (4.50
D330
inch) 1.26 mm 23.81 mm
7M-9595 6.642 mm 45.83
(0.0500 inch) (0.937 inch)
D320 (0.2615 inch)
101.6 mm (4.00
D311
inch)
1673
1670 9M-4163 44.98 mm
114.3 mm (4.50 9.408 mm 2.68 mm 60.50
D333 8N-3724 (1.771 inch)
inch) (0.3704 inch) (0.106 inch)
D330
44.98 mm
D333 114.3 mm (4.50 7S-1825 9.408 mm 2.55 mm 60.50
(1.771 inch)
inch) (0.3704 inch) (0.100 inch)
1676
114.3 mm (4.50
D336
inch) 34.80 mm
1S-2903 7.833 mm 2.12 mm 45.50
(1.370 inch)
1674 (0.3084 inch) (0.084 inch)
120.7 mm (4.75
D334
inch)
D337 2.28 mm 49.23 mm

130.0 mm (5.12 8N-3737 12.522 mm 60.50
D326 (0.0900 inch) (1.938 inch)
inch) (0.4930 inch)
1693
D349
41.81 mm
D348 137.2 mm (5.40 7E-7830 9.408 mm 2.04 mm 45.50
(1.646 inch)
D346 inch) (0.3704 inch) (0.080 inch)
D343
G349
41.81 mm
G348 137.2 mm (5.40 7N-5693 9.408 mm 2.55 mm 60.50
(1.646 inch)
G343 inch) (0.3704 inch) (0.100 inch)
D397
D386
D375
D364
146.1 mm (5.75
D342
inch) 57.96 mm
D339 8H-1994 12.55 mm 2.68 mm 45.50
D13000 (2.282 inch)
(0.494 inch) (0.106 inch)
D318 114.3 mm (4.50

inch)
9.408 mm
146.1 mm (5.75 (0.3704 inch) 2.68 mm 57.96 mm

inch) 1W-1819 (2) (0.106 inch) (2.282 inch)
D342 45.50
9.373 mm
(0.3690 inch)
D398
D379
D353
59.69 mm
G399 158.8 mm (6.25 5S-5323 12.55 mm 3.71 mm 60.50
(2.350 inch)
G398 inch) (0.494 inch) (0.146 inch)
G379
G353
8N-3723 12.55 mm 3.68 mm

(0.494 inch) (0.145 inch)
D399
D398 59.69 mm
158.8 mm (6.25 9.408 mm 60.50
D379 (2.350 inch)
inch) 1W-1822 (2) (0.3704 inch)
D353 3.71 mm
2W-3211 (2)
(0.146 inch)
9.373 mm
(0.3690 inch)
39.37 mm
1404 114.3 mm (4.50 7N-0360 7.823 mm 2.01 mm 60.00
(1.550 inch)
inch) (0.3080 inch) (0.079 inch)
(1) Measure the top and the bottom areas of wear.
Valve Spring Specifications
Illustration 2 g01420828
(E) Spring within tolerance
(F) Diameter
(G) Minimum operating length
(H) Assembled length
(J) Approximate free length
(K) 90 degree angle
Table 3
Specifications for the Valve Springs

Minimum Minimum
Engine Part
Dimension Dimension Dimension Load at Dimension Load at Dimension
Model Number
(J) (F) (H) Dimension (G) Dimension (E)
(H) (G)
C32 4N-5906 62.74 mm 31.75 mm 54.99 mm 291.5 N 42.93 mm 817.5 N 2.19 mm

C30 Spring (2.470 (1.250 (2.165 (65.53 lb) (1.690 (183.8 lb) (0.086
inch) inch) inch) inch) inch)
C32 211-3122
71.70 mm 25.17 mm 60.14 mm 119.5 N 44.02 mm 400.0 N 2.50 mm
C30 Spring
(2.823 (0.991 (2.368 (26.87 lb) (1.733 (89.924 lb) (0.098
C27 (Inner)
C-18
C18 211-3123
C-16 Spring
C16 (Outer) 76.70 mm 36.30 mm 67.12 mm 276.5 N 51.00 mm 836.5 N 2.68 mm
C-15 247-9908 (3.020 (1.429 (2.643 (62.16 lb) (2.008 (188.055 (0.106
C15 Spring inch) inch) inch) inch) lb) inch)
(Outer)
224-4441
64.10 mm 23.24 mm 50.47 mm 128.5 N 34.92 mm 321.5 N 2.24 mm
C13 Spring
(2.524 (0.915 (1.987 (28.89 lb) (1.375 (72.28 lb) (0.088
C-12 (Inner)
C12
C11 214-0586
C-10 62.70 mm 34.00 mm 52.95 mm 270.5 N 37.40 mm 807.5 N 2.19 mm
Spring
(2.469 (1.339 (2.085 (60.81 lb) (1.472 (181.53 lb) (0.086
(Outer)
190-6117
57.80 mm 31.79 mm 37.70 mm 333.0 N 25.70 mm 574.0 N 2.02 mm
Spring
(2.276 (1.252 (1.484 (74.87 lb) (1.012 (129.04 lb) (0.080
(Outer)
190-6115
57.80 mm 23.18 mm 36.50 mm 197.0 N 24.50 mm 301.0 N 2.02 mm
Spring
(2.276 (0.913 (1.437 (44.29 lb) (0.965 (67.67 lb) (0.080
(Inner)
241-8386
56.68 mm 21.34 mm 42.80 mm 146.0 N 30.80 mm 276.0 N 1.98 mm
Spring
(2.232 (0.840 (1.685 (32.82 lb) (1.213 (62.05 lb) (0.078
(Inner)
C-9 inch) inch) inch) inch) inch)
C9
241-8385
67.69 mm 28.56 mm 44.00 mm 300.0 N 32.00 mm 441.0 N 2.36 mm
Spring
(2.665 (1.124 (1.732 (67.44 lb) (1.260 (99.14 lb) (0.093
(Outer)
255-8677
74.60 mm 20.94 mm 46.15 mm 221.0 N 34.15 mm 334.0 N 2.61 mm
Spring
(2.937 (0.824 (1.817 (49.68 lb) (1.345 (75.09 lb) (0.103
(Inner)
255-8678
77.90 mm 29.36 mm 47.35 mm 442.0 N 35.35 mm 641.0 N 2.72 mm
Spring
(3.067 (1.156 (1.864 (99.37 lb) (1.392 (144.10 lb) (0.107
(Outer)
140-6188 67.50 mm 28.59 mm 60.40 mm 266.0 N 46.40 mm 844.0 N 2.36 mm
Spring (2.658 (1.126 (2.378 (59.80 lb) (1.827 (189.74 lb) (0.093
C7
137-6718 92.08 mm 28.82 mm 80.27 mm 610.5 N 66.27 mm 1368.5 N 3.24 mm
Spring (3.625 (1.135 (3.160 (137.25 lb) (2.609 (307.65 lb) (0.128
1W-1748
114.00 mm 68.0 mm 84.87 mm 667.5 N 58.37 mm 1361.5 N 3.98 mm
3600 Spring
(4.490 (2.68 inch) (3.341 (150.06 lb) (2.298 (306.08 lb) (0.157
Series (Outer)
inch) inch) inch) inch)
G3600
Series 1W-1749
C280 107.00 mm 47.92 mm 79.25 mm 318.0 N 52.75 mm 664.0 N 3.74 mm
Spring
(4.210 (1.887 (3.120 (71.49 lb) (2.077 (149.27 lb) (0.147
(Inner)
165-7586
115.90 mm 69.0 mm 84.90 mm 723.0 N 58.40 mm 1351.0 N 4.05 mm
Spring
3616 (4.560 (2.72 inch) (3.340 (162.54 lb) (2.300 (303.72 lb) (0.159
(Outer)
3612 inch) inch) inch) inch)
3608
3606 165-7585
107.40 mm 49.51 mm 81.70 mm 343.0 N 55.20 mm 706.0 N 3.75 mm
Spring
(4.230 (1.949 (3.220 (77.11 lb) (2.170 (158.72 lb) (0.148
(Inner)
G3616
G3612
G3608 7N-1903
51.54 mm 29.24 mm 45.49 mm 104.0 N 31.27 mm 388.0 N 1.80 mm
G3606 Spring
(2.029 (1.151 (1.791 (23.38 lb) (1.231 (87.23 lb) (0.071
3500 (Inner)
Series
G3520B
G3516B
7N-1904
G3516 62.50 mm 43.96 mm 56.36 mm 212.5 N 42.13 mm 783.5 N 2.18 mm
Spring
G3512 (2.460 (1.731 (2.219 (47.77 lb) (1.659 (176.14 lb) (0.086
(Outer)
G3508 inch) inch) inch) inch) inch)
281-6157
75.80 mm 43.47 mm 59.29 mm 534.0 N 40.49 mm 1188.0 N 2.65 mm
3500 Spring
(2.980 (1.711 (2.334 (120.05 lb) (1.594 (267.07 lb) (0.104
Series (Outer)
G3500
Series 194-4902
60.70 mm 30.70 mm 50.34 mm 135.2 N 31.54 mm 414.5 N 2.12 mm
Spring
(2.390 (1.210 (1.982 (30.40 lb) (1.242 (93.19 lb) (0.084
(Inner)
3412
Series
3408
Series
3406C 4N-5906 62.74 mm 31.75 mm 54.99 mm 310.0 N 42.93 mm 817.5 N 2.19 mm
3406B Spring (2.470 (1.250 (2.165 (69.69 lb) (1.690 (183.78 lb) (0.086
3406 inch) inch) inch) inch) inch)
G3400
Series
3412C 4W-2471
3412 Spring 59.46 mm 37.31 mm 53.24 mm 211.1 N 38.96 mm 755.1 N 2.08 mm

3408C (Outer) (2.341 (1.469 (2.096 (47.46 lb) (1.534 (169.75 lb) (0.082
3408B inch) inch) inch) inch) inch)
3408
3406 4W-2472
Series 65.70 mm 25.13 mm 50.24 mm 155.1 N 35.97 mm 321.1 N 2.29 mm
Spring
G3406 (2.587 (0.989 (1.978 (34.87 lb) (1.416 (72.19 lb) (0.090
(Inner)
7S-7144 52.07 mm 35.21 mm 44.86 mm 217.0 N 32.28 mm 658.0 N 1.82 mm

3406
Spring (2.050 (1.386 (1.766 (48.78 lb) (1.271 (147.93 lb) (0.072
9Y-3326
69.04 mm 42.61 mm 53.24 mm 469.0 N 38.96 mm 942.0 N 2.41 mm
Spring
(2.718 (1.678 (2.096 (105.44 lb) (1.534 (211.77 lb) (0.095
3406C (Outer)
3406B
9Y-3327
70.90 mm 29.83 mm 50.42 mm 238.0 N 36.14 mm 423.0 N 2.48 mm
Spring
(2.790 (1.174 (1.985 (53.50 lb) (1.423 (95.09 lb) (0.098
(Inner)
211-3122
71.70 mm 25.17 mm 60.14 mm 135.0 N 44.02 mm 379.0 N 2.50 mm
Spring
(2.823 (0.991 (2.368 (30.35 lb) (1.733 (85.20 lb) (0.098
(Inner)
3406E inch) inch) inch) inch) inch)
3456
211-3123
76.70 mm 36.30 mm 67.12 mm 288.0 N 51.00 mm 848.0 N 2.68 mm
Spring
(3.020 (1.429 (2.643 (64.75 lb) (2.008 (190.64 lb) (0.106
(Outer)
103-2454 54.37 mm 35.56 mm 44.93 mm 350.6 N 31.43 mm 864.6 N 1.90 mm

3300 Spring (2.141 (1.400 (1.769 (78.81 lb) (1.237 (194.36 lb) (0.075
Series inch) inch) inch) inch) inch)
G3300
Series
7S-7144 52.07 mm 35.21 mm 44.86 mm 217.0 N 32.28 mm 658.0 N 1.82 mm
Spring (2.050 (1.386 (1.766 (48.78 lb) (1.271 (147.93 lb) (0.072
3300
Series
G3300
1C-6757 52.07 mm 35.21 mm 44.86 mm 217.0 N 32.28 mm 658.0 N 1.82 mm
Series
Spring (2.050 (1.386 (1.766 (48.78 lb) (1.271 (147.93 lb) (0.072
1673
D333
D330
9N-5495
48.77 mm 26.67 mm 45.77 mm 76.4 N 27.23 mm 289.5 N 1.70 mm
Spring
(1.920 (1.050 (1.802 (17.18 lb) (1.072 (65.08 lb) (0.067
(Inner)
3200 9N-5496
51.77 mm 39.62 mm 45.77 mm 155.0 N 30.23 mm 589.0 N 1.81 mm
Series Spring
(2.038 (1.560 (1.802 (34.85 lb) (1.190 (132.41 lb) (0.071
(Outer)
9N-3617
47.09 mm 36.58 mm 42.04 mm 191.1 N 26.63 mm 721.1 N 1.64 mm
Spring
(1.854 (1.440 (1.655 (42.96 lb) (1.048 (162.11 lb) (0.065
(Outer) (1)
1W-4259 50.70 mm 39.62 mm 45.77 mm 186.6 N 29.63 mm 727.6 N 1.77 mm

Spring (1.996 (1.560 (1.802 (41.95 lb) (1.167 (163.57 lb) (0.070
224-4441
64.10 mm 23.24 mm 50.47 mm 139.5 N 42.70 mm 359.5 N 2.24 mm
Spring
3196 (2.524 (0.915 (1.987 (31.36 lb) (1.681 (80.82 lb) (0.088
(Inner)
Series
214-0586
62.70 mm 34.00 mm 52.95 mm 274.0 N 37.40 mm 811.0 N 2.19 mm
Spring
(2.469 (1.339 (2.085 (61.60 lb) (1.472 (182.32 lb) (0.086
(Outer)
140-6188
67.50 mm 28.59 mm 60.40 mm 278.0 N 46.40 mm 856.0 N 2.36 mm
Spring
(2.658 (1.126 (2.378 (62.50 lb) (1.827 (192.44 lb) (0.093
3126 (Inlet)
Series
137-6718
92.08 mm 28.82 mm 80.27 mm 615.5 N 66.27 mm 1373.5 N 3.22 mm
Spring
(3.625 (1.135 (3.160 (138.37 lb) (2.609 (308.78 lb) (0.127
(Exhaust)
7C-4273 71.00 mm 28.81 mm 65.86 mm 185.5 N 50.70 mm 805.5 N 2.48 mm

Spring (2.795 (1.134 (2.593 (41.70 lb) (1.996 (181.09 lb) (0.098
3116
3114
6I-2307 81.00 mm 28.66 mm 70.80 mm 568.5 N 59.00 mm 1246.5 N 2.83 mm
Spring (3.189 (1.128 (2.787 (127.81 lb) (2.323 (280.23 lb) (0.111
3126 119-3045 76.00 mm 28.91 mm 65.86 mm 426.5 N 50.70 mm 1075.5 N 2.65 mm

3116 Spring (2.992 (1.138 (2.593 (95.89 lb) (1.996 (241.78 lb) (0.104
3160 9N-3617
47.09 mm 36.58 mm 42.04 mm 191.1 N 26.63 mm 721.1 N 1.64 mm
3150 Spring
(1.854 (1.440 (1.655 (42.96 lb) (1.048 (162.11 lb) (0.065
3145 (Outer)
1160
1150 9L-9172
1145 47.12 mm 25.35 mm 43.56 mm 50.3 N 30.86 mm 310.6 N 1.65 mm
Spring
1140 (1.855 (0.998 (1.715 (11.32 lb) (1.215 (69.83 lb) (0.065
(Inner)
4F-2751
74.61 mm 39.89 mm 66.68 mm 166.8 N 55.56 mm 2.61 mm
Spring -
(2.937 (1.571 (2.625 (37.49 lb) (2.187 (0.103
(Outer)
D315 inch) inch) inch) inch) inch)
D311
4F-2752
68.26 mm 27.95 mm 58.74 mm 55.4 N 47.63 mm 2.38 mm
Spring -
(2.687 (1.100 (2.313 (12.46 lb) (1.875 (0.094
(Inner)
D320 8H-9488 59.92 mm 31.63 mm 53.19 mm 181.3 N 42.06 mm 2.09 mm

-
D311 Spring (2.359 (1.245 (2.094 (40.75 lb) (1.656 (0.082
88.90 mm 26.87 mm 61.12 mm 39.0 N 46.83 mm 3.10 mm

1B-9704
(3.500 (1.058 (2.406 (8.77 lb) (1.844 - (0.122
Spring
D330 5F-3111 46.04 mm 28.35 mm 38.89 mm 66.1 N 28.18 mm 1.61 mm

-
D318 Spring (1.813 (1.116 (1.531 (14.87 lb) (1.109 (0.063
5F-3112 48.42 mm 37.05 mm 39.69 mm 184.3 N 28.97 mm 1.69 mm

-
Spring (1.906 (1.459 (1.563 (41.44 lb) (1.141 (0.067
9H-9164 67.31 mm 32.57 mm 59.44 mm 230.7 N 46.84 mm 2.35 mm

-
Spring (2.650 (1.282 (2.340 (51.87 lb) (1.844 (0.093
3306
1673
D333 1C-6763 67.31 mm 32.53 mm 59.44 mm 230.1 N 46.84 mm 2.35 mm
-
D330 Spring (2.650 (1.281 (2.340 (51.73 lb) (1.844 (0.093
D318
2S-5627 67.31 mm 32.57 mm 59.44 mm 229.6 N 46.84 mm 2.35 mm
-
Spring (2.650 (1.282 (2.340 (51.61 lb) (1.844 (0.093
1676
D336 2S-7339 53.85 mm 25.99 mm 48.11 mm 186.9 N 37.44 mm 589.4 N 1.88 mm
1674 Spring (2.120 (1.023 (1.894 (42.02 lb) (1.474 (132.50 lb) (0.074
2S-4213
1693 58.67 mm 37.74 mm 49.53 mm 206.5 N 37.34 mm 595.5 N 2.05 mm
Spring (3)
D343 (2.310 (1.486 (1.950 (46.42 lb) (1.470 (133.87 lb) (0.081
D349
159-7303 49.78 mm 30.86 mm 44.15 mm 180.0 N 31.95 mm 596.0 N 1.74 mm
D348
Spring (1.960 (1.215 (1.738 (40.47 lb) (1.258 (133.99 lb) (0.069
D346
1C-6766
65.38 mm 43.51 mm 56.36 mm 253.5 N 41.00 mm 736.5 N 2.28 mm
Spring
(2.574 (1.713 (2.219 (56.99 lb) (1.614 (165.57 lb) (0.090
(Outer)
9M-5349
D399 55.35 mm 28.57 mm 45.49 mm 78.0 N 30.15 mm 214.0 N 1.93 mm
Spring
D398 (2.179 (1.125 (1.791 (17.54 lb) (1.187 (48.11 lb) (0.076
(Inner)
D379
D375 9M-5350
D353 65.38 mm 43.51 mm 56.36 mm 253.5 N 41.00 mm 736.5 N 2.28 mm
Spring
D342 (2.574 (1.713 (2.219 (56.99 lb) (1.614 (165.57 lb) (0.090
(Outer)
D333
D326
4F-5408 61.52 mm 41.66 mm 49.61 mm 220.3 N 34.26 mm 2.15 mm
-
Spring (2.422 (1.640 (1.953 (49.53 lb) (1.349 (0.085
-
4F-5409 59.92 mm 29.09 mm 48.82 mm 117.1 N 33.48 mm 2.09 mm
Spring (2.359 (1.145 (1.922 (26.33 lb) (1.318 (0.082

D399
D398
7S-6323 66.37 mm 43.98 mm 56.36 mm 351.3 N 41.00 mm 2.32 mm
D379 -
Spring (2.613 (1.732 (2.219 (78.98 lb) (1.614 (0.091
D353
D333
7N-7713 53.33 mm 35.59 mm 47.24 mm 195.0 N 36.83 mm 568.0 N 1.86 mm

1404
(2.100 (1.401 (1.860 (43.84 lb) (1.450 (127.69 lb) (0.073
(1) Replace these springs with 1W-4259 Spring on 3200 Series of engines. Use this spring on the 3100 and 1100 Series of engines.
(3) Install the spring with the painted end upward.
Copyright 1993 - 2008 Caterpillar Inc. Wed Jun 18 13:37:20 EST 2008
Todos los derechos reservados.
Red privada para licenciados del SIS.

Valve and Valve Spring Specifications

Uploaded by

Copyright:

Available Formats

Valve and Valve Spring Specifications

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Valve and Valve Spring Specifications

Uploaded by

Copyright:

Available Formats

3306 Industrial Engine 64Z05381-UP(SEBP1989 - 24) - Estructura del documento Página 1 de 21

Producto: ENGINE - MACHINE

Pautas de reutilización y recuperación

Valve and Valve Spring Specifications{1000, 1100, 1105, 1108}

When replacement parts are required for this product Caterpillar

Failure to heed this warning can lead to premature failures, product

Measuring Valves and Cleaning Valves

Specifications of the Valves

(B) Thickness of the lip

(C) Diameter of the head

(D) Angle of the face

Specifications for the Inlet Valves

(5.709 inch) (0.3704 inch) (0.108 inch) (1.850 inch)

110.000 mm 7.962 mm (0.080 inch) 40.00 mm

280.025 ± 0.025 90.00 mm

144-9992 4.78 mm 45.00

3600 280.025 ± 0.025 90.00 mm

G3600 300.025 ± 0.025 90.00 mm

3500 170.025 ± 0.025 56.00 mm

G3516 0.0010 inch) (0.3704 inch) (0.136 inch)

(0.3704 inch) (0.069 inch) (1.850 inch)

3300 120.675 ± 0.025

G3300 120.675 ± 0.025 7W-7490 51.31 mm

3176C 125.037 ± 0.037

3126 110.0 mm (4.33

3126 110.0 mm (4.33

3126B 110.0 mm (4.33 157-7129 7.963 mm 1.87 mm 40.00 mm 60.25

3126 145-7390 40.00 mm

inch) (0.3704 inch) (0.094 inch)

(1) Measure the top and the bottom areas of wear.

Specifications for the Exhaust Valves

C32 153-7024 2.05 mm

3616 201-8114 4.80 mm 60.13

(0.6275 inch) (0.189 inch)

3600 280.025 ± 0.025 90.00 mm

3500 170.025 ± 0.025 194-4897 (2) 56.00 mm

3412 137.185 ± 0.025 41.81 mm

G3400 137.185 ± 0.025 212-0933 41.81 mm

G3412 137.185 ± 0.025 41.81 mm

148-7455 2.11 mm 60.75

120.675 ± 0.025 44.98 mm

G3300 120.675 ± 0.025 7W-7491 48.16 mm

3126 110.0 mm (4.33

3126 110.0 mm (4.33

3176C 125.037 ± 0.037

D315 114.3 mm (4.50

D315 114.3 mm (4.50

(0.435 inch) (0.048 inch)

D337 2.28 mm 49.23 mm

D318 114.3 mm (4.50

146.1 mm (5.75 (0.3704 inch) 2.68 mm 57.96 mm

8N-3723 12.55 mm 3.68 mm

(1) Measure the top and the bottom areas of wear.

Valve Spring Specifications

(G) Minimum operating length

(H) Assembled length

(J) Approximate free length

(K) 90 degree angle