Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 100 views

    So-54sr 101 Rek

    Uploaded by

    Brett Atkins
    The SO-54SR-1xx-REK controller is used for recloser-type automatic overhead circuit breakers to support MV networks. It performs protection automation functions through algorithms and settings banks to limit disturbances from faults. Communication with SCADA is supported through various standards. The controller measures currents and voltages to monitor the network and control circuit breakers remotely or locally through integrated interfaces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    So-54sr 101 Rek

    Uploaded by

    Brett Atkins
    100 views4 pages
    The SO-54SR-1xx-REK controller is used for recloser-type automatic overhead circuit breakers to support MV networks. It performs protection automation functions through algorithms and settings banks to limit disturbances from faults. Communication with SCADA is supported through various standards. The controller measures currents and voltages to monitor the network and control circuit breakers remotely or locally through integrated interfaces.

    Original Description:

    mIKRONIKA

    Original Title

    SO-54SR 101 REK

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The SO-54SR-1xx-REK controller is used for recloser-type automatic overhead circuit breakers to support MV networks. It performs protection automation functions through algorithms and settings banks to limit disturbances from faults. Communication with SCADA is supported through various standards. The controller measures currents and voltages to monitor the network and control circuit breakers remotely or locally through integrated interfaces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    100 views4 pages

    So-54sr 101 Rek

    Uploaded by

    Brett Atkins
    The SO-54SR-1xx-REK controller is used for recloser-type automatic overhead circuit breakers to support MV networks. It performs protection automation functions through algorithms and settings banks to limit disturbances from faults. Communication with SCADA is supported through various standards. The controller measures currents and voltages to monitor the network and control circuit breakers remotely or locally through integrated interfaces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    SO-54SR The SO-54SR-1xx-REK controller with protection

    automation functions is a basic component of indoor and


    overhead circuit breaker control units of various types
    controller for recloser-type operating in MV networks. Those circuit breakers,
    equipped with control units with advanced automation
    automatic overhead circuit functions, limit disturbances caused by earth faults and
    breakers multi-phase short circuits. An important advantage of the
    SO-54SR-1xx is the ability to perform telemetry functions
    which enable remote controlling and reading states and
    measurements. The device enables automation of
    connection equipment operation, such as THO-RC27 and
    GVR reclosers or other, installed in-depth of a power
    network in the SMART GRID technology.
    Communication with a SCADA supervision system in the
    standard version is realized in the TETRA and/or
    GPRS/UMTS/LTE-APN connection in separated APN by an
    external communication module. Another option is
    communication realized in CDMA2000 and DMR standards
    and using serial or network constant connection.
    The controller, together with other components of a
    control unit, is installed in an insulated steel or aluminum
    casing, ready to be mounted on any type of an electric
    pole.
    In the standard version the SO-54SR-1xx-REK controller is
    Application of the SO-54SR-1xx-REK controller with equipped with an integrated graphic terminal and may be
    protection automation functions to support manufactured in two structure options. The first one
    overhead circuit breakers increases the reliability of cooperates with the IPR-xxx external measurement
    supplying electric energy consumers. It is designed interface while the second one does not require any
    for SMART GRID networks. additional units.
    The controller performs necessary algorithms of protection automation. It has four banks of settings for more
    advanced functions and an integrated disturbance recorder. The SO-54SR-1xx-REK controller is configured
    remotely or locally using dedicated configuration software.

    Structure and equipment

    LED signalization panel


    with replaceable
    description labels

    control buttons

    LED signalization of
    device operation status

    213 230 256

    touch screen

    14

    218

    analog inputs

    protection potential clamp

    power supply

    binary inputs control outputs

    www.mikronika.pl
    Application
    The SO-54SR-1xx-REK controller installed in a control unit.

    control operation mode


    switch: remote, local, disabled

    SO-54SR-1xx-REK circuit breaker state


    signalization
    controller
    electronic local
    control buttons

    switch: operation on line /


    operation under voltage

    AR automation switch

    Features
    Protection functions
    No. ABBREVIATION NAME SYMBOL ANSI CODE

    1 I1NP independent overcurrent protection I1>> 50


    2 I2NP independent overcurrent protection I2>> 50
    3 I4NP independent overcurrent protection I4> 50
    4 I5NP dependent overcurrent protection I5> 51
    5 UPN independent undervoltage protection U< 27
    6 UNN independent overvoltage protection U> 59
    7 I0NP earth fault overcurrent protection I0> 50N
    8 I0NP directional earth fault overcurrent protection I0K> 67N
    9 PNG conductance protection G0> -
    10 PNB susceptance protection B0> -
    11 PNY admittance protection Y0> -
    12 FPC underfrequency protection f< 81U
    13 FNC overfrequency protection f> 81O

    Automation functions
    No. ABBREVIATION NAME

    1 AR Automatic Reclosing
    2 IFPT Instantaneous Fault Protection Tripping
    3 I2H Interlock from magnetic current basing on 2nd harmonic

    www.mikronika.pl
    Telemetry functions
    ELEMENTS SENT TO A DISPATCH CENTRE COMMANDS REALIZED FROM A DISPATCH CENTRE
    binary signals from objects with read precision 1 ms circuit breaker control ON/OFF
    values of phase currents changes of protection setting banks
    values of phase and/or interphase voltages protections and automation enabling/disabling
    value of 3I0 current triggering reset
    active and reactive power, network frequency object state checking

    Recording functions
    < event log
    < multi-channel disturbance recorder, which enables recording oscillograms of measured and calculated values
    as well as binary events and saving in COMTRADE files
    Data from the recorder and the event log is available from the dispatcher panel, pConfig configuration software and
    SCADA dispatch system. It may be also automatically transmitted to a central disturbance server.

    Communication
    For communication with the controller, in the standard version, external communication modules are applied,
    equipped with a GRPS/UMTS/LTE-APN radio connection, supporting DNP 3.0 protocols through TCP/IP or UDP and
    PN-EN 60870-5-104. Communication modules are able to connect to an external TETRA terminal.
    Other communication protocols may be also applied, e.g. PN-EN 60870-5-101, PN-EN 60870-5-103, Modbus, etc.,
    using serial connections. The device may be also applied as a component of a distributed substation telemetry
    system based on the PN-EN 61850 communication standard.

    Measurements
    The controller is manufactured in versions designed for measuring currents from xxx/1A, xxx/5A current transform-
    ers and Rogowski coils. According to the needs, phase and interphase voltages may be measured from outputs of
    voltage transformers or capacitor (reactance) dividers.

    Technical data
    PARAMETER VALUE
    supply voltage 24V AC/DC
    maximal power consumption 14W
    current input constant capacity 2x In
    current input thermal capacity 50 x In in time 1s
    current input dynamic capacity 2,5 x 50 x In in time t<150ms
    current module starting value errors <2,5%
    voltage module starting value errors <2,5%
    time meter starting value errors <0,1%

    Specification of versions
    PARAMETER SO-54SR-101-REK SO-54SR-111-REK SO-54SR-131-REK SO-54SR-141-REK
    WE-A 3x 4 WE-U; Uwe=5V RMS 3x WE-I CR, 6x WE-U DP 4x WE-I PP, 6x WE-U DP 4x WE-I PP, 4x WE-U PN
    WE-B 2x 8 WE-B; 24V DC 2x 8 WE-B; 24V DC 2x 8 WE-B; 24V DC 2x 8 WE-B; 24V DC
    WY-B 4x WY-B; 0,25A/220V DC 4x WY-B; 0,25A/220V DC 4x WY-B; 0,25A/220V DC 4x WY-B; 0,25A/220V DC
    DK/F/SO54SR/EN/1216/1.4

    IPR-xxx TAK NIE NIE NIE


    where:
    < IN-A - analog inputs, IN-U - voltage inputs < IN-U VM - voltage inputs - range 57,7V
    < IN-I RC - current inputs for Rogowski coils < IN-B - binary inputs
    < IN-I CM - current inputs - range 1A or 5A < OUT-C - control outputs
    < IN-U CD - current inputs with capacitor divider < IPR-xxx - external measurement interface

    www.mikronika.pl

    You might also like