SSR Data

Basic Data (Annexure II)
SCHEDULE OF RATES
BASIC DATA
FOR
REVISION OF DATA RATES
FOR THE YEAR :
STATEMENT OF RATES FOR MATERIALS

FOR THE YEAR :
GENERAL GUIDE LINES FOR REVISING RATES OF MATERIALS:
1 Average of the prevailing market rates, ignoring freak rates, shall be the criteria for fixing
2 market rates for materials.
3 The rates for materials shall be inclusive of all taxes, duties and other local levies.
4 The rates for materials shall be inclusive of seigniorage charges wherever applicable.
5 The rates for materials, except those for which lead charges are admissible as per the
statement of lead charges, shall be for all leads.
The rates provided for useful rubble / stone chips from excavation shall be at dump yard.
Sl No. DESCRIPTION OF MATERIAL UNIT RATE

in Rs.
1 Acetylene gas cum
50
2 Asphalt 80/ 100 Grade Kg
3 Binding wire Kg
4 Burnt stone slab 10 cm thick sqm
5 Cement 43 Gr(including loading charges) tonne
6 Chequered plate Kg
7 Coarse aggregate 10-4.75 mm(including seigniorage charges) cum
8 Coarse aggregate 20-10 mm(including seigniorage charges) cum
9 Coarse aggregate 40-20 mm(including seigniorage charges) cum
10 Coarse aggregate 80-40 mm(including bseigniorage charges) cum
11 Coir brush Each

12 Copper sheet 16 SWG kg
13 Coursed rubble stone 30 x 30 x 45 cm(including seigniorage charges) Each
14 Coursed rubble stone 30 x 30 x 60 cm(including seioniorage charges) Each
15 Curing Compound ltr
16 D - cord Rm
17 Delay - noiseless trunk Each

18 Detonating fuse coil Rm
19 Detonating shock tube / Cord relays Rm
20 Detonator delay type Each
21 Detonator electric Each

22 Detonator ordinary Each
23 Empty cement bag Each
24 Explosive ANFO kg
25 Explosive ANFO high strength booster kg
26 Explosive small dia ( Kelvex-220 or equivalent) kg
27 Fine aggregate / sand ( unscreened )(including seiniorage charges) cum
28 Fine aggregate / sand ( screened )(including seigniorage charges) cum

29 Geo-textile ( filter fabric ) 160 gsm sqm
51
32 G I Pipe 100 mm dia B Class Rm

33 G I Pipe 15 mm dia A class Rm
34 G I pipe 25 mm dia A class Rm
35 G I pipe 40 mm dia B class Rm
52
36 G I pipe 50 mm dia A class Rm
37 G I Pipe 80 mm dia B Class Rm
38 G.I Bolts / Nuts and Washers kg
39 G.I sheet ( plain ) tonne

40 Hariyala turfing sods sqm
41 Hectometre stone one line dressed Each
42 Hemp yarn kg
43 Honne wood planks cum
44 Hume pipe with collar 150 mm dia Rm
45 Hume pipe with collar 300 mm dia Rm
46 J- Bolts 30 cm long Each
47 Jungle wood planks cum
48 Khandki stone 15 to 20 cm height Each
51 Kilometre stone one line dressed Each
52 LDPE sheet ( Geo membrane ) 500 micron thick sqm

55 M S Bolts / Nuts / Washers kg
56 Murum(including seioniorage charges and loading charges) cum
57 Oxalic acid ltr

58 Oxygen gas cum
59 PVC sealing strip Rm
53
60 PVC water stopper 310 mm wide Rm
61 PVC pipe of 100 mm dia Rm
62 Reinforcement steel(including loading charges) tonne
63 Resin bond Cement capsule Each
64 Rough stone 20 x 20 x 75 cm Each
65 Shahabad stone slab (including seigniorage charges and loading charges) sqm
66 Stone chips ( at dump yard )(including seigniorage charges and loading charges) cum
67 Stone chips ( at quarry )(including seigniorage charges and loading charges) cum
68 Structural steel angle / channel / beam / bars(including loading charges) tonne
69 Structural steel plate / flats(including loading charges) tonne
70 Super Plasticizer ( Conplast RP-264 or equivalent ) kg
71 Synthetic Enamel paint 1st quality ltr
72 Synthetic adhesive ( Resin + Hardener ) Kg
73 Tarfelt joint filler board 12 mm thick sqm
74 Tarfelt joint filler board 20 mm thick sqm
75 Through stones 20 x 20 x 30 to 45 cm long(including seigniorage charges and loading cha Each
78 Un-coursed rubble stones ( at dump yard )(including seigniorage charges and loading char cum
79 Un-coursed rubble stones ( at quarry )(including seigniorage charges and loading charges) cum
80 Water proofing compound kg
81 Welding electrodes 4 mm dia Each
82 Wire brush Each
83 Wire mesh 20 gauge sqm
84 Zinc chromate red oxide primer paint ltr
85 inorganic zinc silicate ltr
86 solventless coal tar epoxy paint ltr
87 Zinc phosphate primer ltr
88 Allkyd based iron oxide paint ltr
89 cost of hdpe/light black MS casing pipe Rm
54
ADDITIONAL MATERIALS FOR GATES & HOISTS

FOR THE YEAR :
GUIDE LINES :
a. For cast steel / Alloy steel / Forged steel / Bronze, alluminium alloy components the rates
shall be inclusive of cost of basic metal for these components, casting / forging charges,
machining charges and applicable excise duty on finished alloy component.
Basic Casting / Excise Total
metal / machining duty on rate /
or forging ( 1 + 2 ) (1+2+3)
kg / kg % kg
1 2 3 4
Cast steel components :( Basic metal - steel ) 17.00 56.25 13.19 85

Wheel / Pulley / Hub / Plummer / Roller 17.00 64.69 14.7 95
Drum / Gear 17.00 73.13 16.22 105
Pinion
Forged steel components : ( Basic metal - structural steel
Hook / Shackle 24.00 84.38 19.51 130
Alloy steel components : ( Basic metal - alloy steel )
Shaft ( carbon steel ) 60.00 61.88 21.94 145
Pin ( stainless steel ) 80.00 67.5 26.55 175
Bronze, alluminium alloy components : ( Bronze alloy )
Bearing / Bush 175.00 146.25 57.83 380
b. The rate in the total rate column is rounded off to nearest Rs : 5.00.
c. For other materials the rates shall be prevailing market rates.

in Rs.
1 Alloy steel ( IS : 1570-carbon steel ) shafts kg
2 Alloy steel ( IS : 1570-stainless steel ) pins kg
3 Bolt / Nut / Washer ( hot dipped galvanized ) kg
4 Bolt / Nut / Washer ( stainless steel ) kg
5 Bronze / Alluminium alloy ( IS : 305 ) bearings / bushes kg
6 Cast iron blocks kg
7 Cast steel drums / gears kg
8 Cast steel pinions kg
55
9 Cast steel wheels / pulleys / hubs / rollers / retainers kg
10 Chemical for de-greasing/ derusting/phosphate coating ltr
11 Coal tar epoxy paint ltr
12 Forged steel hooks / shackles kg
13 MS pipe 200 / 300 mm dia kg
14 MS pipe 32 mm dia Rm
15 MS pipe 25 mm dia Rm
16 Rubber bottom seal ( IS : 11855 ) Rm
17 Rubber side seal ( music note type teflon claded ) ( IS : 11855 ) Rm
18 Rubber side seal ( music note type uncladed ) ( IS : 11855 ) Rm
19 Rubber side seal Z-type ( IS : 11855 ) Rm
20 Rubber corner seal ( teflon claded ) ( IS : 11855 ) Rm
21 Rubber corner seal ( uncladed ) ( IS : 11855 ) Rm
22 Stainless steel plates / flats kg
23 Welding electrode 4 mm dia x 450 mm ( radiographic low hydrogen ) Each
24 Welding electrode 4 mm dia x 450 mm ( stainless steel ) Each
25 Wire rope 6x37 constn ( IS : 2266 ) kg
26 Zinc kg
27 Zinc rich ( zinc content : 90 % ) epoxy primer ltr
56
MATERIALS FOR POWER SUPPLY WORKS

FOR THE YEAR :

in Rs.
1 Electric pole with fixtures Each
2 Flood light 500 W Each
3 Flood light set Each
4 Fluoscent tube light 40 W Each
5 Fluoscent tube light set Each
6 HT / LT Circuit breaker with accessories Set
7 HT / LT Line conductor 1000 m
8 PVC Armoured cable 10 sqmm and below Rm
9 PVC Armoured cable 16 sqmm Rm
DETAILS OF CAPITAL COST OF MACHINERY / EQUIPMENT

FOR THE YEAR :
GUIDE LINES FOR FIXING CAPITAL COST OF MACHINERY / EQUIPMENT:
1 The Capital cost of machinery / equipment shall be for new machinery / equipment and
shall be inclusive of all taxes, duties, other levies.
2 The cost of transport vehicles / equipment shall be exclusive of cost of tyres and tubes.
3 The cost of drill rods / drill bits / air hose / water hose / road tax / insurance charges and
other consumeable accessories shall not be included in the capital cost.
4 In cases, where the current capital cost of machinery / equipment could not be collected
through enquiries, the capital cost considered for previous year may be updated on the
basis of average percentage increase / decrease in the index for machinery published in
the R.B.I Bulletin.
Sl No: DESCRIPTION OF MACHINERY / EQUIPMENT UNIT Capital Cost
1 Agitator car / Transit mixer 2 cum ( excluding tyres ) Each in Rs:

Tyres and tubes 6 sets Each
2 Air compressor 5 cmm electric Each
57
3 Air compressor 7 cmm diesel Each
5 Air compressor 8.5 cmm diesel Each
6 Air compressor 8.5 cmm electric Each
8 Angle Dozer 90 hp Each
9 Batching plant 0.5 cum with accessories Each
10 Batching plant 2 x 1.00 cum with accessories Each
11 Batching plant 2 x 1.50 cum with accessories Each
12 Bending machine Each
13 Clamp shell and hoisting ropes Each
14 Concrete bucket 1.5 cum Each
15 Concrete hand mixer 45/30 ltr Each
16 Concrete mixer 300/200 ltr(diesel) Each
17 Concrete mixer 300/200 ltr ( ele ) Each
18 Concrete mixer 600/400 ltr(diesel) Each
19 Concrete mixer 600/400 ltr ( ele ) Each
20 Concrete paver 100 sqm/ hr Each
21 Convey mucker ( excluding tyres ) Each
22 Core drilling machine Each
23 Diesel generating set 30 KVA Each
24 Diesel generating set 50 KVA Each
25 Diesel Loco 45 hp Each
26 Dewatering pump 5 hp diesel Each
27 Dewatering pump 5 hp electric Each
32 Drifter Each
33 Drilling jumbo ( excluding tyres ) Each
34 Dumper 4.5 cum ( excluding tyres ) Each
35 Geophysical Ele.resistivity meter Each
36 Grouting pump Each
37 Guniting / sand blasting equipment Each
38 Ice plant with accessories 30 t / day Each
39 Jack hammer Each
58
40 Needle vibrator 40 mm petrol Each
41 Needle vibrator 40 mm electric Each
42 Needle vibrator 60 mm petrol Each
43 Needle vibrator 60 mm electric Each
44 Planing machine 4 m stroke Each
45 Plate shearing machine upto 12 mm Each
46 Pneumatic placer 0.5 cum Each
47 Pneumatic tamper Each
48 Pug cutting machine Each
49 Pusher leg Each
50 Road roller diesel 10 t Each
51 Shovel 0.50 cum 75 hp Each
52 Shovel 0.85 cum 110 hp Each
53 Stationery derric crane 5 t Each
54 Tipper 5 cum ( excluding tyres ) Each

55 Tipping tub 1.5 cum Each
56 Tower crane 5 tonne Each
57 Transformer 250 KVA Each
58 Truck 10 t ( excluding tyres ) Each
59 Truck mounted derric crane 5 t ( excluding tyres ) Each
60 Upright drilling machine Each
61 Ventilation fan 20 hp Each
62 Vibratory pad foot roller 8 t Each
63 Waggon drill Each
64 Water tanker 8000 ltr ( excluding tyres ) Each
65 Welding set Each
66 Winch 35 hp electric Each
59
ACCESSORIES TO MACHINERY / EQUIPMENT

FOR THE YEAR :
Sl No. DESCRIPTION OF MATERIAL UNIT

RATE
1 Casing shoe bit Each in Rs.
2 Diamond core bit BX size Each
3 Diamond core bit NX size Each
4 Double tube core barrel Each
5 Extension drill rod with coupling sleeve Rm
6 Jack hammer drill rod 1.5 m Each
7 Jack hammer drill rod 2.5 m Each
8 Nozzle for guniting / sand blasting gun Each
9 Paving Cylinder Each
10 Rails 30R ( 30 kg / m ) tonne
11 Reamer shell Each
12 T.C.Cross bit 50 mm dia Each
15 Tyres and Tubes for truck Set
16 Wire rope 16 mm dia Rm
17 Excavation of drain with Excavator cum
AGGREGATE CRUSHING & PROCESSING PLANT
1 Jaw crusher 900 x 500 mm ( 120 tph ) with 50 hp motor Each

4 Jaw plates 900 x 500 mm ( serreted ) Set
7 Nylon Conveyor belt 3 ply 600 mm width Rm
8 Nylon Conveyor belt 3 ply 1000 mm width Rm
OTHER COSTS ON MATERIAL / MACHINERY / EQUIPMENT

FOR THE YEAR :
1 The rate provided for ' SUNDRIES' ( Lumpsum provision for unquantified inputs in the data
rates ) shall be updated on the basis of general percentage increase / decrease in the
60
market rates or on the basis of R.B.I ' All Commodity' index.
2 The rate for structural steel fabrication shall include cost of all materials (except structural
steel ), machinery, labour and one coat of primer painting.
3 Demand charges and electric power charges shall be as per prevailing KPTCL tariff.
4 Rate of interest on capital cost shall be as approved by Govt or other competent authority.

1 Air hose 25 mm dia Rm
2 Air hose 50 mm dia Rm
3 Demand charges ( HT-2B ) on power supply KVA / month
4 Diesel ltr
5 Electric power ( HT-2B category ) including tax Kwhr
6 Excise duty on Gates / Hoist supplies %
7 Insurance charges on machinery % / annum
8 Interest on capital cost % / annum
9 Lubricants ltr
10 Petrol ltr
11 Rivets kg
12 Road tax on transport vehicles Rs./annum
13 Shalimastic sealing compound kg
14 Shutter oil ltr
15 Structural steel fabrication kg
16 Sundries ( Lumpsum for unquantified inputs ) LS
17 Water hose ( pressure ) 20 mm dia Rm

18 Steel wedges LS
19 Elbows / Nipple / Plugs etc., LS
20 Soldering materials LS
21 Steam circulation arrangement LS
22 Fuel charges ( gas for heating ) LS
23 Vulcanizing materials LS
24 Other accessories / controls / junctions LS
61
25 Miscellaneous fittings / switches etc LS

26 Anchors / supports for cables / lights LS
62
27 Civil works for foundations / pedastals / duct etc LS
28 Gas cutting set ( 2 Nos 15 m hose and nozzle unit ) EACH
29 Grease Kg
30 Welding holder set ( cable / holder / gloves / mask etc ) EACH
31 Use rate of ropes LS
MATERIALS FOR GATES AND HOISTS
FOR THE YEAR :
RATE
1 Worm reducers EACH in Rs.
Worm reducers EACH
2 Electric motor 20 hp EACH
Electric motor 17.5 hp EACH
3 Electric motor 12.5 hp EACH
Electric motor 2 hp EACH
6 Floating shaft 300 mm dia Kg
63
7 Manual operating system EACH
8 Gate position indicator EACH
9 Ele-magnetic brake EACH
Ele-magnetic brake EACH
Ele-magnetic brake EACH
10 Electric cable / switch / control panel etc LS
Electric cable / switch / control panel etc LS
Electric cable / switch / control panel etc LS
11 Wire rope sockets EACH
STATEMENT OF WAGES OF WORKERS

FOR THE YEAR :
GENERAL GUIDE LINES FOR REVISING WAGES OF WORKERS:
1 The basic wages shall not be less than the minimum wages fixed by the Government.
2 The basic wages need not be revised every year and any revision, if warranted, shall take
into consideration the local conditions for perticular category of worker and the trend in
quoted rates.
a. Current state annual average CP index :
b. Base state annual average CP index : 2491.00
c. Amount of variable DA per point CP index Rs: 1309.00
d. Difference in index (a-b) : 0.03
Variable DA / Day = ( Difference in index ) x ( rate of DA per point ) x 30 / 26 1182.00
Rs: 40.90 / Day
Sl No. CATEGORY OF WORKER Basic wages per a day

in Rs:
I. SKILLED CATEGORY:
64
1 Bar bender
2 Black smith / Tin smith / Rivetor
3 Blaster ( Licensed )
4 Carpenter Cl- I
5 Electrician ( Licensed )
6 Fitter Cl- I
7 Floor Polisher / Tile Layer
8 Foreman
9 Gauge reader
10 Maistry / Work Inspector
11 Mason Cl- I / Brick layer Cl- I
12 Mechanic Cl- I
13 Operator Air compressor / DG set
14 Operator Batching plant
15 Operator Bus/Ambulance/ Lorry/ Tanker
16 Operator Concrete / Asphalt mixer
17 Operator Concrete / Asphalt paver
18 Operator Concrete pump / Placer/ ice plant
19 Operator Core drilling machine
20 Operator Crane/ Tower crane/ Cable way
21 Operator Drilling jumbo / Loco / Winch
65
22 Operator Grouting/ Guniting/ Shotcreting
23 Operator Jackhammer/Pneumatic tamper
24 Operator Pump / Ventilation fan
25 Operator Lathe/Drilling/Shearing machine
26 Operator Bending / Planing machine
27 Operator Road roller
28 Operator Shovel / Scraper / Dozer
29 Operator Spillway / Sluice gate
30 Operator Crusher / Conveyor / Mucker
31 Operator Tipper / Dumper / Transit mixer
32 Operator Concrete vibrator
33 Operator Vibratory plain / padfoot roller
34 Operator Wagon drill / Drifter
35 Painter Cl- I
36 Plumber ( Licensed ) / Pipe fitter
37 Sarang / Khalasi
38 Spun pipe moulder
39 Stone chiseller CI- I / Stone cutter Cl- l
40 Struct. steel Fabricator / Marker / Erector
41 Welder / Gas Cutter
42 Welder (X-ray quality)
II. SEMI SKILLED CATEGORY:
1 Asphalt Sprayer / Boiler attendant
2 Bhisti
3 Boatman with boat
4 Carpenter Cl- II / Erector shuttering
5 Cartman with double bullock cart
6 Cartman with single bullock cart
7 Chavali / Navagani
8 Crowbarman / Jumperman
9 Fitter Cl- II
10 Gangman / Head / Survey mazdoor
11 Gardener / Trained mali
12 Helper Air compressor / DG set
13 Helper Batching plant
14 Helper Blasting
15 Helper Bus/ Ambulance/ Lorry/ Tanker
16 Helper Bending/Shearing/Planing machine
17 Helper Carpenter
18 Helper Concrete / Asphalt mixer
66
19 Helper Concrete / Asphalt paver
20 Helper Core drilling machine
21 Helper Crane/ Tower crane/ Cable way
22 Helper Drilling jumbo / Loco / Winch
23 Helper Fitter / Fabrication
24 Helper Grouting/ Guniting/ Shotcreting
25 Helper Jack hammer / Pneumatic tamper
26 Helper Laboratory / Instrumentation
27 Helper Road roller
28 Helper Shovel / Scraper / Dozer
29 Helper Crusher / Conveyor / Mucker
30 Helper Tipper / Dumper/ Transit mixer
31 Helper Vibrator
32 Helper Vibratory plain/ padfoot roller
33 Helper Wagon drill/ Drifter
67
34 Lineman Electric / Telephone
35 Mason Cl- ll / Brick layer Cl-II
36 Mechanic Cl- II
37 Painter Cl- II
38 Patkari / Neeraganti / Sowdy
39 Stone Chiseller Cl- II
40 Stone breaker / Hammerman
41 Valveman / Canal sluice operator
III. UN-SKILLED CATEGORY:
1 Cement / Asphalt handling mazdoor
2 Civic worker
3 Heavy mazdoor
4 Light mazdoor
5 Watchman
IV. OTHER CATEGORY:
1 Care-taker / conductor / Lift attender
2 Cook / Messman
3 Dhobi
4 Diploma Engineer / Surveyor
5 Diver with headgear
6 Graduate / Laboratory Assistant
7 Graduate Engineer/ Geologist
8 Horticulture Assistant / Photographer
9 ITI certificate holder / Tracer / Printer
10 Literate mazdoor
11 Stenographer / Computer Operator
12 Telephone / Wireless Operator
13 Typist
Add for Contrators' Overheads and profit including

VAT and labour importation@
Add for blasting studies & monitoring vibrations etc @
Add for shifting & re-erection of BP @
Add for LH / RH shifting & erection of Paver @
Add for ledge cutting / erection of tracks etc @
Aportioned hire charges of machinery @ for lining slab
Aportioned cost of labour @ for lining slabs
Aportioned hire charges of machinery @ for lug slabs
Aportioned cost of labour @ for lug slabs
Add for wastage @
68
Add for repairs/ replacements/ catwalks etc., @
Add for binding wire/ temperary supports etc., @
Add for scaffolding @
Add for labour for scaffolding @
Add for scaffolding materials @
Deduct salvage value @
Add for excise duty @
Add for insurance charges @
Add for designs and drawings @
Add for zigs / supports / winches / chain-pulley @
Add for power supply arrangements @
Add for transportation upto work site @
Add for Air and Water line @
Add for Ventilation @
Add for Lighting @
Add for Ele sub-station / Demand charges @
Add for scaffolding / ladder etc @
Add for labour for scaffolding @
Add for laying & dismantling loco track @
Add for additional hidden cost @
Add for additional hidden cost on labour @
Add for conveyor system @
Add for electric sub-station / Demand charges @
Add for trestle bridge for tower crane track @
Add for scaffolding @
Add for transportation @
Add for erection @
Add for dismantling @
Add for re-transportation costs @
Add for lighting plant area & miscellaneous @
Add for lighting & domestic use for camp @
Add for reserve capacity @
Note: Remove the items which are not relevant
69
COM-HCHM
HIRE CHARGES OF MACHINERY
REFERENCE DATA ON CAPITAL COST & WAGES OF CREW

Description of machinery Capital cost Wages of Wages of
S.No in Rs Operator Helper
C Rs/Day Rs/Day
1 Agitator car / Transit mixer 2 cum 0 0.00 0.00
Tyres and tubes 6 sets 0
2 Air compressor 5 cmm ( electric ) 0 0.00 0.00
3 Air compressor 7 cmm ( diesel ) 0 0.00 0.00
5 Air compressor 8.5 cmm ( diesel ) 0 0.00 0.00
6 Air compressor 8.5 cmm ( electric ) 0 0.00 0.00
8 Angle Dozer 90 hp 0 0.00 0.00
9 Batching plant 0.5 cum 0 0.00 0.00
10 Batching plant 2 x 1.00 cum 0 0.00 0.00
11 Batching plant 2 x 1.50 cum 0 0.00 0.00
12 Bending machine 3000 x 12 mm 0 0.00 0.00
13 Clamp shell and hoisting ropes 0
14 Concrete bucket 1.5 cum 0
15 Concrete hand mixer 45 / 30 ltr 0
16 Concrete mixer 300 / 200 ( diesel ) 0 0.00 0.00
17 Concrete mixer 300 / 200 ltr ( electric ) 0 0.00 0.00
18 Concrete mixer 600 / 400 ( diesel ) 0 0.00 0.00
19 Concrete mixer 600 / 400 ltr ( electric ) 0 0.00 0.00
20 Concrete paver 100 sqm / hr 0 0.00 0.00
21 Convey mucker 0 0.00 0.00
22 Core drilling machine 0 0.00 0.00
23 Diesel generating set 30 KVA 0 0.00 0.00
24 Diesel generating set 50 KVA 0 0.00 0.00
25 Diesel Loco 45 hp 0 0.00 0.00
26 Dewatering pump 5 hp ( diesel ) 0 0.00
27 Dewatering pump 5 hp ( electric ) 0 0.00
644
COM-HCHM

29 Dewatering pump 10 hp ( electric 0 0.00
31 Dewatering pump 20 hp ( electric) 0 0.00
32 Drifter 0 0.00 0.00
33 Drilling jumbo 0 0.00 0.00
34 Dumper 4.5 cum 0 0.00 0.00
35 Geophysical Electric resistivity meter 0
36 Grouting pump 0 0.00 0.00
37 Guniting / sand blast equipment 0 0.00 0.00
38 Ice plant & accessories 30 t / day 0 0.00 0.00
39 Jack hammer 0 0.00 0.00
40 Needle vibrator 40 mm ( petrol ) 0 0.00 0.00
41 Needle vibrator 40 mm ( electric ) 0 0.00 0.00
42 Needle vibrator 60 mm ( petrol ) 0 0.00 0.00
43 Needle vibrator 60 mm ( electric ) 0 0.00 0.00
44 Planing machine 4 m stroke 0 0.00 0.00
45 Plate shearing machine upto 12 mm 0 0.00 0.00
46 Pneumatic placer 0.5 cum 0 0.00
47 Pneumatic tamper 0 0.00 0.00
48 Pug cutting machine 0
49 Pusher leg 0
50 Road roller diesel 10 t 0 0.00 0.00
51 Shovel 0.50 cum 75 hp 0 0.00 0.00
52 Shovel 0.85 cum 110 hp 0 0.00 0.00
53 Stationery derric crane 0
54 Tipper 5 cum 0 0.00 0.00
55 Tipping tub 1.5 cum 0
56 Tower crane 5 tonne 0 0.00 0.00
57 Transformer 250 KVA 0
58 Truck 10 t 0 0.00 0.00
59 Truck mounted derric crane 5 t 0 0.00 0.00
60 Upright drilling machine 0 0.00
645
COM-HCHM
61 Ventilation fan 20 hp 0 0.00

62 Vibratory pad foot roller 8 t 0 0.00 0.00
63 Wagon drill 0 0.00 0.00
64 Water tanker 8000 ltr 0 0.00 0.00
65 Welding set 0
66 Winch 35 hp ( electric ) 0 0.00 0.00
OTHER DATA FOR WORKING OUT HIRE CHARGES
Rate of interest "r" : % per annum 0.00

Road tax : per annum. Rs: 0.00
Insurance : % per annum. 0.00
Diesel : per litre Rs: 0.00
Petrol : per litre Rs: 0.00
Lubricating oil : per litre Rs: 0.00
Tyres & tubes for lorry : per set Rs: 0.00
Electric energy (Category:HT-2B) : per kwhr Rs: 0.00
Salvage value ( as percentage of capital cost ) "s" : % 0%
STANDARD DATA FOR MACHINERY
Note: Life and repair charges are as per CWC guidelines except for truck, tipper and road roller
For truck, tipper and road roller, the life is considered as per the prevailing norms in the
Water Resources Department and repair charges are as per CWC guidelines'
S.No Description of machinery Life in years Life in hours Repair cost Type Duty
%C Factor Factor
n h r c1 c2
1 Agitator car / Transit mixer 2 cum 10 10000 120 0.50 1.00
Tyres and tubes 6 sets 1 800 25
2 Air compressor 5 cmm ( electric ) 10 16000 80 1.00 0.75
3 Air compressor 7 cmm ( diesel ) 8 10000 100 1.00 0.75
4 Air compressor 7 cmm ( electric ) 10 16000 80 1.00 0.75
646
COM-HCHM
5 Air compressor 8.5 cmm ( diesel 8 10000 100 1.00 0.75

6 Air compressor 8.5 cmm ( electric) 10 16000 80 1.00 0.75
7 Air compressor 15 cmm ( electric) 20 30000 80 1.00 1.00
8 Angle Dozer 90 hp 10 12000 200 0.57 0.75
9 Batching plant 0.5 cum 18 30000 75 1.00 1.00
10 Batching plant 2 x 1.00 cum 18 30000 75 1.00 1.00
11 Batching plant 2 x 1.50 cum 18 30000 75 1.00 1.00
12 Bending machine 3000 x 12 mm 15 30000 50 1.00 1.00
13 Clamp shell and hoisting ropes 5000
14 Concrete bucket 1.5 cum 3 5000 25 1.00 1.00
15 Concrete hand mixer 45 / 30 ltr 5 6000 80 1.00 1.00
16 Concrete mixer 300 / 200 ( diesel) 5 6000 80 1.00 1.00
17 Concrete mixer 300 / 200 ltr ( electric) 5 6000 80 1.00 1.00
18 Concrete mixer 600 / 400 ( diesel) 5 6000 80 1.00 1.00
19 Concrete mixer 600 / 400 ltr ( electric 5 6000 80 1.00 1.00
20 Concrete paver 100 sqm / hr 16 20000 100 1.00 1.00
21 Convey mucker 10 15000 100 0.58 1.00
22 Core drilling machine 8 8000 80 1.00 1.00
23 Diesel generating set 30 KVA 10 20000 100 1.00 1.00
24 Diesel generating set 50 KVA 10 20000 100 1.00 1.00
25 Diesel Loco 45 hp 10 16000 120 1.00 0.75
26 Dewatering pump 5 hp ( diesel ) 8 10000 100 1.00 1.00
27 Dewatering pump 5 hp ( electric ) 12 20000 70 1.00 1.00
29 Dewatering pump 10 hp ( electric 12 20000 70 1.00 1.00
31 Dewatering pump 20 hp ( electric 12 20000 70 1.00 1.00
32 Drifter 10 8000 80 1.00 1.00
33 Drilling jumbo 8 12000 100 0.30 0.10
34 Dumper 4.5 cum 8 10000 175 0.30 0.70
35 Geophysical Electric resistivity meter 5 10000 75 1.00 1.00
36 Grouting pump 10 10000 80 1.00 1.00
37 Guniting / sand blast equipment 5 6000 100 1.00 1.00
38 Ice plant & accessories 30 t / day 20 40000 75 1.00 0.75
39 Jack hammer 10 8000 80 1.00 1.00
647
COM-HCHM
40 Needle vibrator 40 mm ( petrol ) 3 5000 70 1.00 0.50

41 Needle vibrator 40 mm ( electric ) 3 5000 70 1.00 0.50
42 Needle vibrator 60 mm ( petrol ) 3 5000 70 1.00 0.50
43 Needle vibrator 60 mm ( electric ) 3 5000 70 1.00 0.50
44 Planing machine 4 m stroke 16 20000 100 1.00 1.00
45 Plate shearing machine upto 12 mm 15 30000 100 1.00 1.00
46 Pneumatic placer 0.5 cum 5 8000 100 1.00 1.00
47 Pneumatic tamper 10 10000 80 1.00 1.00
48 Pug cutting machine 10 8000 150 1.00 1.00
49 Pusher leg 10 10000 80 1.00 1.00
50 Road roller diesel 10 t 8 10000 80 1.00 1.00
51 Shovel 0.50 cum 75 hp 10 12000 150 0.50 0.80
52 Shovel 0.85 cum 110 hp 10 12000 150 0.50 1.00
53 Stationery derric crane 10 16000 50 1.00 1.00
54 Tipper 5 cum 10 16000 175 0.30 0.70
55 Tipping tub 1.5 cum 5 8000 80 1.00 1.00
56 Tower crane 5 tonne 20 30000 120 1.00 1.00
57 Transformer 250 KVA 15 180 25 1.00 1.00
58 Truck 10 t 10 16000 175 0.30 0.70
59 Truck mounted derric crane 5 t 10 16000 175 0.30 0.70
60 Upright drilling machine 10 8000 150 1.00 1.00
61 Ventilation fan 20 hp 12 58000 80 1.00 1.00
62 Vibratory pad foot roller 8 t 8 8000 200 1.00 1.00
63 Wagon drill 8 8000 80 1.00 1.00
64 Water tanker 8000 ltr 10 16000 175 0.30 0.70
65 Welding set 10 8000 100 0.50 1.00
66 Winch 35 hp ( electric ) 8 8000 120 1.00 0.70
RATE ANALYSIS FOR HIRE CHARGES OF MACHINERY

( EXCLUDING FUEL & CREW )
648
COM-HCHM
FOR THE YEAR :
Capital cost of machinery / equipment : C

Salvage value of machinery / equipment ( as percentage of capital cost ) : s
Rate of interest per annum : I
Life of machinery / equipment in years : n
Life of machinery / equipment in hours : h
Average capital cost C x ( n + 1 ) / 2 n : C'
Repair charges ( as percentage of capital cost ) : r
Depreciation charges ( 1 - s / 100 ) x Capital cost / life in hours
Interest charges Av.Capital cost x Rate of interest x life in years/life in hours/100
Repair charges Repair provision x Capital cost / life in hours / 100
( for value of ' r ' refer standard data table )
Miscellaneous charges ( as percentage of repair charges ) : 10%
S.No Description of machinery Depreciation Interest Repair Misce. Insurance/ Total

(1- C'xIxn/h/100 in rxC/h/100 in rxC/h/1000 road tax in
s/100)xC/h in Rs Rs in Rs Rs
1 Agitator car / Transit mixer 2 cum Rs 0.00 0 0.00 0.00 0 0.00
Tyres and tubes 6 sets 0.00 0 0.00 0.00 0 0.00
2 Air compressor 5 cmm ( electric ) 0.00 0.00 0.00 0.00 0 0.00
3 Air compressor 7 cmm ( diesel ) 0.00 0.00 0.00 0.00 0 0.00
4 Air compressor 7 cmm ( electric ) 0.00 0.00 0.00 0.00 0 0.00
5 Air compressor 8.5 cmm ( diesel) 0.00 0.00 0.00 0.00 0 0.00
6 Air compressor 8.5 cmm ( electric) 0.00 0.00 0.00 0.00 0 0.00
7 Air compressor 15 cmm ( electric) 0.00 0.00 0.00 0.00 0 0.00
8 Angle Dozer 90 hp 0.00 0.00 0.00 0.00 0 0.00
9 Batching plant 0.5 cum 0.00 0.00 0.00 0.00 0 0.00
10 Batching plant 2 x 1.00 cum 0.00 0.00 0.00 0.00 0 0.00
11 Batching plant 2 x 1.50 cum 0.00 0.00 0.00 0.00 0 0.00
12 Bending machine 3000 x 12 mm 0.00 0.00 0.00 0.00 0 0.00
13 Clamp shell and hoisting ropes 0.00 0 0.00
14 Concrete bucket 1.5 cum 0.00 0.00 0.00 0.00 0 0.00
15 Concrete hand mixer 45 / 30 ltr 0.00 0.00 0.00 0.00 0 0.00
16 Concrete mixer 300 / 200 ( diesel) 0.00 0.00 0.00 0.00 0 0.00
17 Concrete mixer 300 / 200 ltr ( electric) 0.00 0.00 0.00 0.00 0 0.00
18 Concrete mixer 600 / 400 ( diesel) 0.00 0.00 0.00 0.00 0 0.00
19 Concrete mixer 600 / 400 ltr ( electric 0.00 0.00 0.00 0.00 0 0.00
649
COM-HCHM
20 Concrete paver 100 sqm / hr 0.00 0.00 0.00 0.00 0 0.00

21 Convey mucker 0.00 0.00 0.00 0.00 0 0.00
Tyres and tubes 6 sets 0.00 0.00 0.00 0.00 0 0.00
22 Core drilling machine 0.00 0.00 0.00 0.00 0 0.00
23 Diesel generating set 30 KVA 0.00 0.00 0.00 0.00 0 0.00
24 Diesel generating set 50 KVA 0.00 0.00 0.00 0.00 0 0.00
25 Diesel Loco 45 hp 0.00 0.00 0.00 0.00 0 0.00
26 Dewatering pump 5 hp ( diesel ) 0.00 0.00 0.00 0.00 0 0.00
27 Dewatering pump 5 hp ( electric ) 0.00 0.00 0.00 0.00 0 0.00
29 Dewatering pump 10 hp ( electric 0.00 0.00 0.00 0.00 0 0.00
31 Dewatering pump 20 hp ( electric 0.00 0.00 0.00 0.00 0 0.00
32 Drifter 0.00 0.00 0.00 0.00 0 0.00
33 Drilling jumbo 0.00 0.00 0.00 0.00 0 0.00
34 Dumper 4.5 cum 0.00 0.00 0.00 0.00 0 0.00
35 Geophysical Electric resistivity meter 0.00 0.00 0.00 0.00 0 0.00
36 Grouting pump 0.00 0.00 0.00 0.00 0 0.00
37 Guniting / sand blast equipment 0.00 0.00 0.00 0.00 0 0.00
38 Ice plant & accessories 30 t / day 0.00 0.00 0.00 0.00 0 0.00
39 Jack hammer 0.00 0.00 0.00 0.00 0 0.00
40 Needle vibrator 40 mm ( petrol ) 0.00 0.00 0.00 0.00 0 0.00
41 Needle vibrator 40 mm ( electric ) 0.00 0.00 0.00 0.00 0 0.00
42 Needle vibrator 60 mm ( petrol ) 0.00 0.00 0.00 0.00 0 0.00
43 Needle vibrator 60 mm ( electric ) 0.00 0.00 0.00 0.00 0 0.00
44 Planing machine 4 m stroke 0.00 0.00 0.00 0.00 0 0.00
45 Plate shearing machine upto 12 mm 0.00 0.00 0.00 0.00 0 0.00
46 Pneumatic placer 0.5 cum 0.00 0.00 0.00 0.00 0 0.00
47 Pneumatic tamper 0.00 0.00 0.00 0.00 0 0.00
48 Pug cutting machine 0.00 0.00 0.00 0.00 0 0.00
49 Pusher leg 0.00 0.00 0.00 0.00 0 0.00
50 Road roller diesel 10 t 0.00 0.00 0.00 0.00 0 0.00
51 Shovel 0.50 cum 75 hp 0.00 0.00 0.00 0.00 0 0.00
52 Shovel 0.85 cum 110 hp 0.00 0.00 0.00 0.00 0 0.00
53 Stationery derric crane 0.00 0.00 0.00 0.00 0 0.00
54 Tipper 5 cum 0.00 0.00 0.00 0.00 0 0.00
650
COM-HCHM

55 Tipping tub 1.5 cum 0.00 0.00 0.00 0.00 0 0.00
56 Tower crane 5 tonne 0.00 0.00 0.00 0.00 0 0.00
57 Transformer 250 KVA 0.00 0.00 0.00 0.00 0 0.00
58 Truck 10 t 0.00 0.00 0.00 0.00 0 0.00
59 Truck mounted derric crane 5 t 0.00 0.00 0.00 0.00 0 0.00
60 Upright drilling machine 0.00 0.00 0.00 0.00 0 0.00
61 Ventilation fan 20 hp 0.00 0.00 0.00 0.00 0 0.00
62 Vibratory pad foot roller 8 t 0.00 0.00 0.00 0.00 0 0.00
63 Wagon drill 0.00 0.00 0.00 0.00 0 0.00
64 Water tanker 8000 ltr 0.00 0.00 0.00 0.00 0 0.00
65 Welding set 0.00 0.00 0.00 0.00 0 0.00
66 Winch 35 hp ( electric ) 0.00 0.00 0.00 0.00 0 0.00
RATE ANALYSIS FOR FUEL CHARGES OF MACHINERY

FOR THE YEAR :
Electric motor powered machinery:

Energy consumption( in kwhr/hr) : 0.746 x BHP x c1 x c2
Diesel engine powered machinery:
Diesel consumption ( in ltr / hr ) : 0.220 x FHP x c1 x c2
c1 and c2 are type and duty factors ( refer standard data table for values of c1 and c2 ).
Provision for Oil & Lubricants :
Electric motor operated machinery : 20 percent of energy charges
Diesel engine operated machinery : 25 percent of fuel charges
Fuel/power Lubricant/
S.No Description of machinery FHP/BHP of Ele power charges/ oil / hour in Total
machine Diesel ltr / hour kwhr / hr hr in Rs Rs in Rs
1 Agitator car / Transit mixer 2 cum 110 12.10 0.00 0.00 0.00
651
COM-HCHM
2 Air compressor 5 cmm ( electric ) 45 25.18 0.00 0.00 0.00

3 Air compressor 7 cmm ( diesel ) 60 9.90 0.00 0.00 0.00
4 Air compressor 7 cmm ( electric ) 60 33.57 0.00 0.00 0.00
5 Air compressor 8.5 cmm ( diesel 75 12.38 0.00 0.00 0.00
6 Air compressor 8.5 cmm ( electric) 75 41.96 0.00 0.00 0.00
7 Air compressor 15 cmm ( electric) 125 93.25 0.00 0.00 0.00
8 Angle Dozer 90 hp 90 8.46 0.00 0.00 0.00
9 Batching plant 0.5 cum 15 11.19 0.00 0.00 0.00
10 Batching plant 2 x 1.00 cum 45 33.57 0.00 0.00 0.00
11 Batching plant 2 x 1.50 cum 55 41.03 0.00 0.00 0.00
12 Bending machine 3000 x 12 mm 15 11.19 0.00 0.00 0.00
13 Clamp shell and hoisting ropes
14 Concrete bucket 1.5 cum
15 Concrete hand mixer 45 / 30 ltr
16 Concrete mixer 300 / 200 ( diesel) 5 1.10 0.00 0.00 0.00
17 Concrete mixer 300 / 200 ltr ( electric) 5 3.73 0.00 0.00 0.00
18 Concrete mixer 600 / 400 ( diesel) 10 2.20 0.00 0.00 0.00
19 Concrete mixer 600 / 400 ltr ( electric 10 7.46 0.00 0.00 0.00
20 Concrete paver 100 sqm / hr
21 Convey mucker 60 25.96 0.00 0.00 0.00
22 Core drilling machine 15 3.30 0.00 0.00 0.00
23 Diesel generating set 30 KVA 40 8.80 0.00 0.00 0.00
24 Diesel generating set 50 KVA 60 13.20 0.00 0.00 0.00
25 Diesel Loco 45 hp 45 7.43 0.00 0.00 0.00
26 Dewatering pump 5 hp ( diesel ) 5 1.10 0.00 0.00 0.00
27 Dewatering pump 5 hp ( electric ) 5 3.73 0.00 0.00 0.00
29 Dewatering pump 10 hp ( electric 10 7.46 0.00 0.00 0.00
31 Dewatering pump 20 hp ( electric 20 14.92 0.00 0.00 0.00
32 Drifter
33 Drilling jumbo 90 0.59 0.00 0.00 0.00
34 Dumper 4.5 cum 120 5.54 0.00 0.00 0.00
35 Geophysical Electric resistivity meter 0.00
36 Grouting pump 5 3.73 0.00 0.00 0.00
37 Guniting / sand blast equipment
38 Ice plant & accessories 30 t / day 190 106.31 0.00 0.00 0.00
39 Jack hammer
652
COM-HCHM
40 Needle vibrator 40 mm ( petrol ) 2 0.22 0.00 0.00 0.00

41 Needle vibrator 40 mm ( electric ) 2 0.75 0.00 0.00 0.00
42 Needle vibrator 60 mm ( petrol ) 3 0.33 0.00 0.00 0.00
43 Needle vibrator 60 mm ( electric ) 3 1.12 0.00 0.00 0.00
44 Planing machine 4 m stroke 15 11.19 0.00 0.00 0.00
45 Plate shearing machine upto 12 mm 20 14.92 0.00 0.00 0.00
46 Pneumatic placer 0.5 cum
47 Pneumatic tamper
48 Pug cutting machine 0.5 0.37 0.00 0.00 0.00
49 Pusher leg
50 Road roller diesel 10 t 45 9.90 0.00 0.00 0.00
51 Shovel 0.50 cum 75 hp 75 6.60 0.00 0.00 0.00
52 Shovel 0.85 cum 110 hp 110 12.10 0.00 0.00 0.00
53 Stationery derric crane
54 Tipper 5 cum 90 4.16 0.00 0.00 0.00
55 Tipping tub 1.5 cum
56 Tower crane 5 tonne 26 19.40 0.00 0.00 0.00
57 Transformer 250 KVA
58 Truck 10 t 90 4.16 0.00 0.00 0.00
59 Truck mounted derric crane 5 t 90 4.16 0.00 0.00 0.00
60 Upright drilling machine 5 3.73 0.00 0.00 0.00
61 Ventilation fan 20 hp 20 14.92 0.00 0.00 0.00
62 Vibratory pad foot roller 8 t 65 14.30 0.00 0.00 0.00
63 Wagon drill
64 Water tanker 8000 ltr 90 4.16 0.00 0.00 0.00
65 Welding set
66 Winch 35 hp ( electric ) 35 18.28 0.00 0.00 0.00
RATE ANALYSIS FOR OPERATING CREW CHARGES

FOR THE YEAR :
For the purpose of working out wages of crew on hourly basis the daily wages are converted to
yearly wages by multiplying the daily wages with ( 26 days x 12 months). The yearly wages are
653
COM-HCHM
then divided by yearly usage of machinery in hours to get hourly wages of operating crew.
Yearly usage of machinery in hours = Life of machinery in hours / Life of machinery in years
Example: Operating crew charges for Air compressor ( diesel ) :
Operator compressor : 0.00 / Day

Helper compressor : 0.00 / Day
Life of Air compressor ( diesel ) in hours : 10000 hours
Life of Air compressor ( diesel ) in years : 8 years
Yearly usage of Air compressor ( 10000 / 8 ) : 1250 hours
Yearly wages of Operator compressor = ( 26 x 12 x Daily wages ) Rs: 0.00
Yearly wages of Helper compressor = ( 26 x 12 x Daily wages ) Rs: 0.00
Total yearly operating crew charges for Air compressor ( diesel ) Rs: 0.00
Hourly operating crew charges= ( yearly crew charges / yearly usage of machinery) Rs: 0.00
Rounded off to Rs: 41.90
Yearly Hourly
S.No Description of machinery Total Yearly wages usage of Crew
No. of Operator in Helper in machinery Charges
Operator No. of Helper Rs Rs in hours in Rs
1 Agitator car / Transit mixer 2 cum 1 1 0.00 0.00 1000 0.00
2 Air compressor 5 cmm ( electric ) 1 1 0.00 0.00 1600 0.00
3 Air compressor 7 cmm ( diesel ) 1 1 0.00 0.00 1250 0.00
4 Air compressor 7 cmm ( electric ) 1 1 0.00 0.00 1600 0.00
5 Air compressor 8.5 cmm ( diesel 1 1 0.00 0.00 1250 0.00
6 Air compressor 8.5 cmm ( electric) 1 1 0.00 0.00 1600 0.00
7 Air compressor 15 cmm ( electric) 1 1 0.00 0.00 1500 0.00
8 Angle Dozer 90 hp 1 1 0.00 0.00 1200 0.00
9 Batching plant 0.5 cum 2 2 0.00 0.00 1667 0.00
10 Batching plant 2 x 1.00 cum 2 2 0.00 0.00 1667 0.00
11 Batching plant 2 x 1.50 cum 2 2 0.00 0.00 1667 0.00
12 Bending machine 3000 x 12 mm 1 1 0.00 0.00 2000 0.00
13 Clamp shell and hoisting ropes
14 Concrete bucket 1.5 cum
15 Concrete hand mixer 45 / 30 ltr
16 Concrete mixer 300 / 200 ( diesel) 1 1 0.00 0.00 1200 0.00
17 Concrete mixer 300 / 200 ltr ( electric) 1 1 0.00 0.00 1200 0.00
18 Concrete mixer 600 / 400 ( diesel) 1 1 0.00 0.00 1200 0.00
19 Concrete mixer 600 / 400 ltr ( electric 1 1 0.00 0.00 1200 0.00
654
COM-HCHM
20 Concrete paver 100 sqm / hr 2 2 0.00 0.00 1250 0.00

21 Convey mucker 1 1 0.00 0.00 1500 0.00
22 Core drilling machine 1 1 0.00 0.00 1000 0.00
23 Diesel generating set 30 KVA 1 1 0.00 0.00 2000 0.00
24 Diesel generating set 50 KVA 1 1 0.00 0.00 2000 0.00
25 Diesel Loco 45 hp 1 1 0.00 0.00 1600 0.00
26 Dewatering pump 5 hp ( diesel ) 1 0.00 1250 0.00
27 Dewatering pump 5 hp ( electric ) 1 0.00 1667 0.00
29 Dewatering pump 10 hp ( electric 1 0.00 1667 0.00
31 Dewatering pump 20 hp ( electric 1 0.00 1667 0.00
32 Drifter 1 1 0.00 0.00 800 0.00
33 Drilling jumbo 1 1 0.00 0.00 1500 0.00
34 Dumper 4.5 cum 1 1 0.00 0.00 1250 0.00
35 Geophysical Electric resistivity meter
36 Grouting pump 1 1 0.00 0.00 1000 0.00
37 Guniting / sand blast equipment 1 1 0.00 0.00 1200 0.00
38 Ice plant & accessories 30 t / day 1 1 0.00 0.00 2000 0.00
39 Jack hammer 1 1 0.00 0.00 800 0.00
40 Needle vibrator 40 mm ( petrol ) 1 1 0.00 0.00 1667 0.00
41 Needle vibrator 40 mm ( electric ) 1 1 0.00 0.00 1667 0.00
42 Needle vibrator 60 mm ( petrol ) 1 1 0.00 0.00 1667 0.00
43 Needle vibrator 60 mm ( electric ) 1 1 0.00 0.00 1667 0.00
44 Planing machine 4 m stroke 1 1 0.00 0.00 1250 0.00
45 Plate shearing machine upto 12 mm 1 1 0.00 0.00 2000 0.00
46 Pneumatic placer 0.5 cum 1 1 0.00 1600 0.00
47 Pneumatic tamper 1 1 0.00 0.00 1000 0.00
48 Pug cutting machine
49 Pusher leg
50 Road roller diesel 10 t 1 1 0.00 0.00 1250 0.00
51 Shovel 0.50 cum 75 hp 1 1 0.00 0.00 1200 0.00
52 Shovel 0.85 cum 110 hp 1 1 0.00 0.00 1200 0.00
53 Stationery derric crane
54 Tipper 5 cum 1 1 0.00 0.00 1600 0.00
55 Tipping tub 1.5 cum
56 Tower crane 5 tonne 1 1 0.00 0.00 1500 0.00
57 Transformer 250 KVA
655
COM-HCHM
58 Truck 10 t 1 1 0.00 0.00 1600 0.00

59 Truck mounted derric crane 5 t 1 1 0.00 0.00 1600 0.00
60 Upright drilling machine 1 1 0.00 800 0.00
61 Ventilation fan 20 hp 1 1 0.00 4833 0.00
62 Vibratory pad foot roller 8 t 1 1 0.00 0.00 1000 0.00
63 Wagon drill 1 1 0.00 0.00 1000 0.00
64 Water tanker 8000 ltr 1 1 0.00 0.00 1600 0.00
65 Welding set
66 Winch 35 hp ( electric ) 1 1 0.00 0.00 1000 0.00
HIRE CHARGES OF OF MACHINERY

FOR THE YEAR :
S.No Description of machinery Unit Hire charge in Fuel charge Crew

Rs in Rs Charge in Total in Rs
1 2 3 4 5 Rs. 6 7
1 Agitator car / Transit mixer 2 cum Hour 0.00 0.00 0.00 0.00
2 Air compressor 5 cmm ( electric ) Hour 0.00 0.00 0.00 0.00
3 Air compressor 7 cmm ( diesel ) Hour 0.00 0.00 0.00 0.00
4 Air compressor 7 cmm ( electric ) Hour 0.00 0.00 0.00 0.00
5 Air compressor 8.5 cmm ( diesel Hour 0.00 0.00 0.00 0.00
6 Air compressor 8.5 cmm ( electric) Hour 0.00 0.00 0.00 0.00
7 Air compressor 15 cmm ( electric) Hour 0.00 0.00 0.00 0.00
8 Angle Dozer 90 hp Hour 0.00 0.00 0.00 0.00
9 Batching plant 0.5 cum Hour 0.00 0.00 0.00 0.00
10 Batching plant 2 x 1.00 cum Hour 0.00 0.00 0.00 0.00
11 Batching plant 2 x 1.50 cum Hour 0.00 0.00 0.00 0.00
12 Bending machine 3000 x 12 mm Hour 0.00 0.00 0.00 0.00
13 Clamp shell and hoisting ropes Hour 0.00 0.00 0.00 0.00
14 Concrete bucket 1.5 cum Hour 0.00 0.00 0.00 0.00
15 Concrete hand mixer 45 / 30 ltr Hour 0.00 0.00 0.00 0.00
16 Concrete mixer 300 / 200 ( diesel) Hour 0.00 0.00 0.00 0.00
17 Concrete mixer 300 / 200 ltr ( electric) Hour 0.00 0.00 0.00 0.00
656
COM-HCHM
18 Concrete mixer 600 / 400 ( diesel) Hour 0.00 0.00 0.00 0.00
19 Concrete mixer 600 / 400 ltr ( electric Hour 0.00 0.00 0.00 0.00
20 Concrete paver 100 sqm / hr Hour 0.00 0.00 0.00 0.00
21 concete placer pump / hour Hour 102.00 2.00 16.80 120.80
22 Convey mucker Hour 0.00 0.00 0.00 0.00
23 Core drilling machine Hour 0.00 0.00 0.00 0.00
24 Diesel generating set 30 KVA Hour 0.00 0.00 0.00 0.00
25 Diesel generating set 50 KVA Hour 0.00 0.00 0.00 0.00
26 Diesel Loco 45 hp Hour 0.00 0.00 0.00 0.00
27 Dewatering pump 5 hp ( diesel ) Hour 0.00 0.00 0.00 0.00
28 Dewatering pump 5 hp ( electric ) Hour 0.00 0.00 0.00 0.00
30 Dewatering pump 10 hp ( electric Hour 0.00 0.00 0.00 0.00
32 Dewatering pump 20 hp ( electric Hour 0.00 0.00 0.00 0.00
33 Drifter Hour 0.00 0.00 0.00 0.00
34 Drilling jumbo Hour 0.00 0.00 0.00 0.00
35 Dumper 4.5 cum Hour 0.00 0.00 0.00 0.00
36 Geophysical Electric resistivity meter Hour 0.00 0.00 0.00 0.00
37 Grouting pump Hour 0.00 0.00 0.00 0.00
38 Guniting / sand blast equipment Hour 0.00 0.00 0.00 0.00
39 Ice plant & accessories 30 t / day Hour 0.00 0.00 0.00 0.00
40 Jack hammer Hour 0.00 0.00 0.00 0.00
41 Needle vibrator 40 mm ( petrol ) Hour 0.00 0.00 0.00 0.00
42 Needle vibrator 40 mm ( electric ) Hour 0.00 0.00 0.00 0.00
43 Needle vibrator 60 mm ( petrol ) Hour 0.00 0.00 0.00 0.00
44 Needle vibrator 60 mm ( electric ) Hour 0.00 0.00 0.00 0.00
45 Planing machine 4 m stroke Hour 0.00 0.00 0.00 0.00
46 Plate shearing machine upto 12 mm Hour 0.00 0.00 0.00 0.00
47 Pneumatic placer 0.5 cum Hour 0.00 0.00 0.00 0.00
48 Pneumatic tamper Hour 0.00 0.00 0.00 0.00
49 Pug cutting machine Hour 0.00 0.00 0.00 0.00
50 Pusher leg Hour 0.00 0.00 0.00 0.00
51 Road roller diesel 10 t Hour 0.00 0.00 0.00 0.00
52 Shovel 0.50 cum 75 hp Hour 0.00 0.00 0.00 0.00
53 Shovel 0.85 cum 110 hp Hour 0.00 0.00 0.00 0.00
54 Stationery derric crane Hour 0.00 0.00 0.00 0.00
55 Tipper 5 cum Hour 0.00 0.00 0.00 0.00
657
COM-HCHM
56 Tipping tub 1.5 cum Hour 0.00 0.00 0.00 0.00

57 Tower crane 5 tonne Hour 0.00 0.00 0.00 0.00
58 Transformer 250 KVA Hour 0.00 0.00 0.00 0.00
59 Truck 10 t Hour 0.00 0.00 0.00 0.00
60 Truck mounted derric crane 5 t Hour 0.00 0.00 0.00 0.00
61 Upright drilling machine Hour 0.00 0.00 0.00 0.00
62 Ventilation fan 20 hp Hour 0.00 0.00 0.00 0.00
63 Vibratory pad foot roller 8 t Hour 0.00 0.00 0.00 0.00
64 Wagon drill Hour 0.00 0.00 0.00 0.00
65 Water tanker 8000 ltr Hour 0.00 0.00 0.00 0.00
66 Welding set Hour 0.00 0.00 0.00 0.00
67 Winch 35 hp ( electric ) Hour 0.00 0.00 0.00 0.00
658
IRR-DAW
Chapter - I
Standard Data
Index- code
IRR-DAW DAM AND ALLIED WORKS
IRR-DAW-1 EXCAVATION & FOUNDATION TREATMENT WORKS:
IRR-DAW-1-1 Excavation for foundation in all kinds of soil including boulders upto
0.30 m diameter for dam, spillway, intake structure and other appurtenant
works and placing the excavated soil neatly in dump area or disposing off
the same as directed etc., complete with initial lead upto 1 km
and all lifts.
DATA & RATE ANALYSIS
A. MATERIALS: UNIT
880 cum
Sl No Particulars Unit Quantity Rate Amount
in Rs. in Rs
1 NIL 0.00
0.00
Total cost of Materials Rs:
B. MACHINERY:
Sl No Description Unit Quantity Rate Amount

in Rs. in Rs
1 Shovel 0.85 cum capacity Hour 8.00
Fuel / Energy charges Hour 8.00
2 Dumpers 5 cum capacity 6 Nos Hour 48.00
3 Tipper 5 cum capacity 1 No Hour 8.00
Total hire charges of Machinery Rs:
C. LABOUR:

in Rs. in Rs
1 Crew for Shovel Hour 8.00
2 Crew for Dumper Hour 48.00
3 Crew for Tipper Hour 8.00
4 work inspector Day 1.00
5 mazdoor Day 16.00
Total cost of Labour Rs: 0.00
D Add for contractor's profit and 0% Rs.
overheads on A+B+C Total cost f 880.00 cum Rs:
Rate per/ Cu.mt.=(A+B+C+D) /880 Rs:
IRR-DAW-1-2 Excavation for foundation in ordinary rock without blasting including

boulders above 0.3 m upto 0.6 m dia for dam, spillway, intake structure and
other appurtenant works and placing the excavated material neatly in dump
area or disposing off the same as directed etc., complete with initial lead
upto 1 km and all lifts.
DATA: Capacity of shovel bucket : 0.85 cum
A. MATERIALS: UNIT : 520 cum

in Rs. in Rs.
1 NIL 0.00
B. MACHINERY:

in Rs. in Rs
1
IRR-DAW

2 Dumpers 5 cum capacity( 4 Nos) Hour 32.00
3 Tipper 5 cum capacity( 1 No) Hour 8.00
C. LABOUR:

in Rs. in Rs
5 Crowbarman Day 2.50
6 mazdoor Day 10.00
Total cost of Labour Rs.
overheads on A+B+C 520 cum cum Rs:
IRR-DAW-1-3 Excavation for foundation in hard rock requiring blasting including

boulders above 0.6 m upto 1.2 m dia. for dam, spillway, intake structure
and other appurtenant works and placing the excavated material neatly in
dump area or disposing off the same as directed etc., complete with initial
lead upto 1 km and all lifts.
A. MATERIALS: UNIT : 520 CU.MTS

in Rs. in Rs
1 Use rate of 1.5 m drill rod Rm 216.00
Reconditioning charges @ 10%
2 Use rate of air hose 4 Nos. Hour 26.00
3 Explosive small dia kg 104.00
4 Electric detonators Nos 154.00
5 Fuse coil Rm 320.00
6 Sundries LS 5.00
Total cost of Materials Rs.
B. MACHINERY:

in Rs. in Rs
2 Dumpers 5 cum capacity 4 Nos. Hour 32.00
4 Air compressor 8.5 cmm ( ele ) 2 N Hour 13.00
5 Jack hammers 4 Nos. Hour 26.00
C. LABOUR:

in Rs. in Rs
4 Crew for Air compressor Hour 13.00
5 Crew for Jack hammer Hour 26.00
7 Blaster Day 1.00
8 Helper blaster Day 1.00
10 Stone breaker Day 1.00
11 mazdoor Day 10.00
overheads on A+B+C Rs:
Rate per/ Cu.mt.=(A+B+C+D) /520 Rs.
2
IRR-DAW
IRR-DAW-1-4 Excavation for foundation in hard rock of all toughness by blasting

(a) including boulders above 1.2 m dia. for dam, spillway, intake structure and
other appurtenant works and placing the excavated rock neatly in dump area
or stack yard including levelling as directed etc., complete with
initial lead upto 1 km and all lifts.
DATA & RATE ANALYSIS UNIT
A. MATERIALS: 320.00 cum
in Rs. in Rs
1 Use rate of drill rod 1.5 m long Rm 310.00
3 Explosive small dia kg 95.00
4 Ordinary detonators Nos 10.00
7 Sundries LS 5.00
Rs:
B. MACHINERY:
in Rs. in Rs
4 Angle dozer 90 hp Hour 1.00
5 Air compressor 8.5 cmm (ele) 2 NosHour 24.00
Total hire charges of Machinery Rs.
C. LABOUR:
in Rs. in Rs
4 Crew for Dozer Hour 1.00
8 Blaster Day 1.00
12 mazdoor Day 6.00
ABSTRACT:
A. Cost of Materials Rs: 0.00
B. Hire charges of Machinery Rs: 0.00
C. Cost of Labour Rs: 0.00
Total Rs: 0.00
overheads on A+B+C Rs:
Rate per Cu.mt.=(A+B+C+D) /320 Rs:
3
IRR-DAW
IRR-DAW-1-5 Excavation for foundation in hard rock of all toughness including boulders
(b) above 1.2 m dia. by controlled blasting method and controlling fly-rock
by muffling arrangements for dam, spillway, intake structure and other
appurtenant structures etc., including placing and levelling the excavated
rock neatly in dump area or other place as directed etc., complete with
lead upto upto 1 km and all lifts.
DATA & RATE ANALYSIS UNIT :

in Rs. in Rs
1 Use rate of drill rod 1.5 m length Rm 464.00
2 Use rate of 50 m air hose 4 Nos. Hour 70.00
3 Use rate of chain link wire mesh sqm 715.00
4 Use rate of sand bag Nos 580.00
5 Explosive small dia. kg 149.00
7 Electric delay detonators Nos 500.00
9 Sundries LS 10.00
B. MACHINERY:
in Rs. in Rs
C. LABOUR:
in Rs. in Rs
1 Crew for Shovel Hour 12.00 0.00 0.00
2 Crew for Angle dozer Hour 2.00 0.00 0.00
3 Crew for Dumper Hour 36.00 0.00 0.00
4 Crew for Tipper Hour 4.00 0.00 0.00
5 Crew for Air compressor Hour 35.00 0.00 0.00
6 Crew for Jack hammer Hour 70.00 0.00 0.00
7 work inspector Day 4.50 0.00 0.00
8 Blaster Day 1.50 0.00 0.00
9 Helper blaster Day 3.00 0.00 0.00
10 Crowbarman Day 2.50 0.00 0.00
11 Stone breaker Day 2.50 0.00 0.00
13 mazdoor Day 20.00 0.00 0.00
Total cost of Labour Rs. 0.00
ABSTRACT:
D.Add for contractor's profit and overheads on

A+B+C 0% Rs.
4
IRR-DAW
IRR-DAW-1-6 Excavation for foundation in hard rock of all toughness including boulders
( c) above 1.2 m dia. by line drilling and smooth blasting and controlling
fly-rock by muffling arrangements for dam, spillway, intake structure and
other appurtenant structures etc., including dressing sides and bed to
required level / profile, placing and levelling the excavated rock neatly in
dump area or other place as directed etc., complete with lead upto 1 km and
all lifts.
Note : i ) 1 m width of excavation along the face to be dressed shall be treated as
excavation by line drilling and smooth blasting.
ii ) The rate under this item shall be paid only on ascertaining that the
surface requiring dressing has come off neatly as per specifications or
atleast 50 percent of smooth blast holes are visible for inspection and are
spaced at specified interval.
iii ) In case, where the above criteria is not fulfilled payment shall be
restricted to the rate provided for excavation by normal or controlled blasting
as the case may be..
UNIT :
in Rs. in Rs
7 Sundries LS 2.00
Total cost of Materials Rs.
B. MACHINERY:
in Rs. in Rs
C. LABOUR:
in Rs. in Rs
2 Crew for Angle dozer Hour 0.25
7 Blaster Day 0.50
11 mazdoor Day 2.00
Add for contractor's profit and overheads on

D A+B+C 0% Rs.
5
IRR-DAW
IRR-DAW-1-7 Preparing foundation bed for masonry or concrete by benching,

stepping, removing all loose material by wedging / chiselling and disposing
off the same as directed and cleaning the surface with air and water jet etc.
,complete with initial lead upto 50 m and all lifts.
DATA: 1 Crowbarman, 1 stone breaker and 1 mazdoor prepare 50 sqm per day.
0.5 mazdoor for air water jet cleaning for 100 sqm area.
DATA & RATE ANALYSIS UNIT:

A. MATERIALS: 100.00 sqm
in Rs. in Rs
1 NIL
Total cost of Materials
B. MACHINERY:
in Rs. in Rs
1 Air compressor 8.5 cmm ( ele ) Hour 1.00
2 Pump 5 hp ( ele ) Hour 1.00
Total hire charges of Machinery Rs. 0.00
C. LABOUR:
in Rs. in Rs
2 Crew for Pump Hour 1.00
4 mazdoor Day 2.50
5 Crowbar man Day 2.00
Total cost of Labour Rs:

D A+B+C 0% Rs.
Rate per/ Square.mt.=(A+B+C+D) /100 Rs:
IRR-DAW-1-8 Preparing foundation bed for cut-off trench filling in rock portion by
removing all loose materials by wedging / chiselling and disposing off the
same as directed etc., complete with initial lead upto 50 m and all lifts.
DATA: 1 crowbar man, 1 stone breaker and 1 mazdoor prepare 50 sqm per day.

UNIT:
in Rs. in Rs
1 NIL 0.00 0.00 0.00
0.00 0.00 0.00
Total cost of Materials Rs. 0.00
B. MACHINERY:
in Rs. in Rs
1 NIL 0.00 0.00 0.00
0.00 0.00 0.00
Total cost of Machinery Rs. 0.00
C. LABOUR:
in Rs. in Rs
1 Crowbar man Day 2.00 0.00 0.00
3 mazdoor Day 2.00 0.00 0.00
D A+B+C 0% Rs.
Rate per/ Square.mt.=(A+B+C+D) /100 Rs:
6
IRR-DAW
IRR-DAW-1-9 Drilling 45 to 50 mm dia holes vertical or inclined upto 10 degrees to

vertical in rock /masonry/ concrete by percussion drilling using waggon
drill or any other suitable equipment including cost of all materials,
machinery, labour, redrilling through partially set grout wherever required
etc., complete.
for drilling upto 6 m depth from surface.
NOTE: The item rate for drilling through rock / masonry / concrete includes redrilling
through partially set grout, if any, in the portion of hole already grouted.
DATA: Generally rate of drilling by waggon drill in rock or masonry or concrete in
open area including shifting from hole to hole will be about 12 m per hour.
As normally 6 m stage is considered for grouting, 16 holes of 6 m each
considered for rate analysis with one 8.5 cmm capacity air compressor and
one waggon drill per day.
For drilling in hard rock beyond 6 m from surface increase the basic rate per Rm of previous
stage by 10 percent for next stage of 6 m beyond previous stage towards redrilling in partially
set grout / additional extension rods / reduction in progress etc.

UNIT:
A. MATERIALS: 96.00 Rm
in Rs. in Rs
1 Use rate of cross bit 50 mm dia Rm 96.00
2 Use rate of 50 mm dia air hose 50 Hour 8.00
3 Use rate of extension rod 4.5 m Rm 96.00
B. MACHINERY:
in Rs. in Rs
1 Waggon drill Hour 8.00
3 Sundries LS 2.00
Total hire charges of Machinery
C. LABOUR:
in Rs. in Rs
1 Crew for Waggon drill Hour 8.00
3 mazdoor Day 2.00
Total cost of Labour

D A+B+C 0% Rs.
Rate per/ R.Mt.=(A+B+C+D) /96 Rs:
Beyond 6 m upto 12 m from surface :

Upto 6 m from surface Rate per Rm Rs:
Add for redrilling through partially set grout / additional
extension rods / reduction in rate of drilling etc @ 10% Rs:
Beyond 6 m upto 12 m from surface Rate / Rm Rs:

For 6 m to 12 m from surface Rate per Rm Rs:



extension rods / reduction in rate of drilling etc @ : 10% Rs
7
IRR-DAW

Beyond 42 m upto 48 m from surface
IRR-DAW-1-10 Flushing grout holes of all sizes with water and air jets alternatively for an
average period of 30 minutes including water intake observations after
flushing, cost of all materials, machinery, labour etc., complete.
A. MATERIALS: 192.00 Rm.
in Rs. in Rs
1 Use rate of air hose 2 Nos x 8 hrs Hour 16.00
2 Use rate of water hose 2 Nos x 8 hr Hour 16.00
3 Sundries LS 2.00
B. MACHINERY:
in Rs. in Rs
3 Sundries LS 2.00
Total hire charges of Machinery Rs: 0.00
C. LABOUR:
in Rs. in Rs
3 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs.
Rate per/ Running .Metre.=(A+B+C+D) /192 Rs:
IRR-DAW-1-11 Consolidation grouting with neat cement grout mix of suitable

(a) consistency under specified pressure as directed in drilled holes by stage
grouting method including cost of all materials, machinery, labour,
redrilling if necessary etc.,complete with initial lead upto 1 km and all lifts.

A. MATERIALS: 1.05 Ton
in Rs. in Rs
1 Cement tonne 1.05
2 Use rate of 50 m pressure hose Hour 8.00
3 Sundries ( packer assembly etc ) LS 3.00
B. MACHINERY:
Sl No Description Unit Quantity
1 Grouting equipment Hour 8.00

3 Sundries LS 2.00
C. LABOUR:
in Rs. in Rs
1 Crew for Grout pump Hour 8.00
3 mazdoor ( cement handling) Day 2.00
ABSTRACT:
A. Cost of Materials
B. Hire charges of Machinery
C. Cost of Labour
A+B+C 0% Rs.
8
IRR-DAW
Rate per/ Ton.=(A+B+C+D) /1.05 Rs:
IRR-DAW-1-12 Curtain grouting with neat cement grout mix of suitable consistency
(b) under specified pressure as directed in drilled holes by stage grouting
method including cost of all materials, machinery, labour, redrilling if
necessary etc., complete with initial lead upto 1 km and all lifts.
A. MATERIALS: 1.05 Ton
in Rs. in Rs
1 Cement tonne 1.05
2 Use rate of 100 m pressure hose Hour 8.00
3 Use rate of 400 m GI pipe Hour 8.00
4 Sundries ( packer assembly etc ) LS 3.00
B. MACHINERY:
in Rs. in Rs
1 Grouting equipment Hour 8.00
3 Sundries LS 2.00
C. LABOUR:
in Rs. in Rs
3 Pipe fitter Day 1.00
4 mazdoor ( cement handling ) Day 3.00
ABSTRACT:
A. Cost of Materials Rs:
B. Hire charges of Machinery Rs:
C. Cost of Labour Rs:
A+B+C 0% Rs.
Rate per/ Ton.=(A+B+C+D) /1.05 Rs:
IRR-DAW-1-13 Providing and fixing 25 mm dia 3 m long cold twisted deformed steel
dowel bars with one end driven into 45 to 50 mm diameter 1.50 m deep
hole drilled in bed rock and other end provided with L-bend for embedding in
concrete / masonry of over flow / non-over flow blocks and other appertenant
works including cost of drilling and cleaning hole, filling hole with cement
mortar 1 : 1 proportion, driving anchor rod, cost of all materials, machinery,
labour etc., complete with initial lead upto 1 km and all lifts.
Consider 25 anchor rods for analysis.
A. MATERIALS: 25 Nos.
in Rs. in Rs
1 Use rate of drill bit 50 mm dia Rm 37.50
2 Use rate of air hose 50 m Hour 4.00
3 Anchor rod 25 mm dia kg 303.20
4 Cement kg 75.00
5 Sand ( screened ) cum 0.05
B. MACHINERY:

C. LABOUR:

3 Bar bender Day 0.50
4 Mason Cl- II Day 0.50
5 mazdoor Day 1.00
ABSTRACT:
9
IRR-DAW

A+B+C 0% Rs.
Rate per/ Each.=(A+B+C+D) /25 Rs:
IRR-DAW-1-14 Providing and fixing 25 mm dia. 2.75 m long ribbed steel anchor rods
with one end split and driven firmly using steel wedge into 1.25 m deep 45
to 50 mm dia. hole drilled in bed rock and other end provided with L- bend
for embedding in concrete / masonry for spillway and appurtenant works
including drilling and cleaning hole, filling hole with thick cement slurry,
driving anchor rod, cost of all materials, machinery, labour, steel wedge
etc., complete with initial lead upto 1 km and all lifts.
Consider 25 anchor rods for analysis.
A. MATERIALS: 25.00 Nos.
in Rs. in Rs
1 Use rate of 50 mm dia drill bit Rm 31.50
2 Use rate of air hose 50 m 1 Nos. Hour 3.00
3 Anchor rod 25 mm dia kg 277.92
4 Cement kg 62.50
5 Gas for splitting anchor rods LS 5.00
6 Steel wedges LS 10.00
Total cost of Materials Rs: 0.00
B. MACHINERY:
in Rs. in Rs
C. LABOUR:
in Rs. in Rs
5 Gas cutter Day 1.00
6 mazdoor Day 2.00
ABSTRACT:
A+B+C 0% Rs.
Rate per/ Each.=(A+B+C+D) /25 Rs:
IRR-DAW-2 REINFORCEMENT & CEMENT CONCRETE WORKS :
IRR-DAW-2-1A Providing, fabricating and placing in position reinforcement steel for RCC,below 36 dia rods
overlaps and wastages wherever required, tying with 1.25 mm diameter soft
annealed steel wire, including cost of all materials, machinery, labour etc.,
complete with initial lead upto 1 km and all lifts.
overlaps and wastage as per NHAI-data
Lap jointing considered for bars upto 36 mm diameter.
Quantity of binding wire per tonne : 9.00 kg

overlapping and wastage Wastage of steel 5.00 percent
RATE ANALYSIS
UNIT :
A. MATERIALS: 1.00 tonne
in Rs. in Rs
1 Rein.Steel with 5 % wastage tonne 1.05
2 Binding wire 1.25 mm dia kg 9.00
B. MACHINERY:
in Rs. in Rs
C. LABOUR:
in Rs. in Rs
10
IRR-DAW

4 mazdoor Day 6.84
A.MATERIAL
B.LABOURs
C. MACHINERY
A+B+C 0% Rs.
Rate per/ TON.=(A+B+C+D) / I Rs:
IRR-DAW-2-1B Providing, fabricating and placing in position reinforcement steel for RCC
above 36 dia with welding and wastage at 2.5%, tying with 1.25 mm diameter soft
annealed steel wire, including cost of all materials, machinery, labour etc.,
overlaps and wastage as per NHAI-data
welding joints considered for bars above 36 mm diameter.

A. MATERIALS: 1.00 tonne
in Rs. in Rs
1 Rein.Steel with 2.5 % wastage tonne 1.03 0.00
3 Welding electrodes 5 per jointand One 70.00

14 joints per ton
B. MACHINERY:
in Rs. in Rs
1 welding machine hour 10.00
fuel charges 10.00 49.00
C. LABOUR:
in Rs. in Rs
1 welder day 2.50
3 mazdoor Day 6.84
ABSTRACT:
A. Cost of Materials
C. Cost of Labour
A+B+C 0%
Rate per/ TON.=(A+B+C+D) / I
IRR-DAW-2-2 Providing and laying insitu vibrated M-15 ( 28 days cube compressive
strength not less than 15 N / sq mm ) grade cement concrete using 80 mm
down size approved, clean, hard, graded aggregates including cost of all
materials, machinery, labour, formwork, centering, scaffolding, cleaning,
batching, mixing, placing in position, levelling, vibrating, finishing, curing
etc.,complete for plain concrete works with initial lead upto 1 km and
all lifts. ( Cement content : 210 kg /cum with use of super plasticiser ,
CA : 0.98 cum, Blending Ratio of CA -- 40:30:20:10, FA : 0.35 cum )

in Rs. in Rs
1 Cement for mix kg 50400.00
Cement for incidentals @ 3 kg / cu kg 720.00
2 Coarse aggregate 80-40 mm cum 94.08
Coarse aggregate 40-20 mm cum 70.56
Coarse aggregate 10 mm below cum 23.52
3 Fine aggregate ( screened ) cum 84.00
4 Super Plasticizer or AEA kg 201.60
5 Use rate of shuttering sqm 120.00
Add seigniorage charges on CA @ (Included in material rates)
Add seigniorage charges on FA @ (Included in material rates)
B. MACHINERY:
in Rs. in Rs
1 Batching plant Hour 8.00
2 Air compressor 7 cmm ( ele ) Hour 8.00
11
IRR-DAW

3 Tipper Hour 32.00
4 Tower crane 5 t Hour 16.00
5 Concrete bucket Hour 40.00
6 10 hp pump ( ele ) Hour 8.00
7 Needle vibrator 60 mm dia ( ele ) Hour 16.00
8 Sundries LS 10.00
C. LABOUR:
in Rs. in Rs
1 Crew for Batching plant Hour 8.00
3 Crew for Tipper ( 4 ) Hour 32.00
4 Crew for Tower crane ( 2 ) Hour 16.00
6 Crew for Needle vibrator ( 2 ) Hour 16.00
7 Mason Class-I Day 4.00
8 Foreman Day 2.00
9 mazdoor
for silo ( cement handling ) Day 2.00
for batching plant Day 2.00
for conveyor system Day 2.00
for laying & vibrating Day 6.00
for cleaning / washing / curing Day 2.00
10 Labour cost for shuttering sqm 120.00
ABSTRACT:
A. Cost of Materials including seigniorage charges Rs: 0.00

A+B+C 0% Rs.
Rate per/ CU.MTS=(A+B+C+D) /240 Rs:
strength not less than10 N / sq mm ) grade cement concrete using 80 mm
all lifts. ( Cement content : 190 kg /cum with use of super plasticiser,
CA: 0.98 cum, Blending Ratio of CA --40:30:20:10, FA: 0.37 cum)

in Rs. in Rs
1 Cement for mix kg 45600
4 Super Plasticizer or AEA kg 182.40
B. MACHINERY:
in Rs. in Rs
1 Batching plant 2 x 1.5 cum Hour 8.00 0.00 0.00
Fuel / Energy charges Hour 8.00 0.00 0.00
2 Air compressor 7 cmm ( ele ) Hour 8.00 0.00 0.00
3 Tipper Hour 32.00 0.00 0.00
4 Tower crane 5 t Hour 16.00 0.00 0.00
5 Concrete bucket Hour 40.00 0.00 0.00
6 10 hp pump ( ele ) Hour 8.00 0.00 0.00
7 Needle vibrator 60 mm dia ( ele ) Hour 16.00 0.00 0.00
8 Sundries LS 10.00 0.00 0.00
C. LABOUR:
12
IRR-DAW

in Rs. in Rs
1 Crew for Batching plant Hour 8.00 0.00 0.00
3 Crew for Tipper ( 4 ) Hour 32.00 0.00 0.00
4 Crew for Tower crane ( 2 ) Hour 16.00 0.00 0.00
5 Crew for Pump Hour 8.00 0.00 0.00
6 Crew for Needle vibrator ( 2 ) Hour 16.00 0.00 0.00
7 Mason Class-I Day 4.00 0.00 0.00
8 Foreman Day 2.00 0.00 0.00
9 mazdoor
for silo ( cement handling ) Day 2.00 0.00 0.00
for batching plant Day 2.00 0.00 0.00
for conveyor system Day 2.00 0.00 0.00
for laying & vibrating Day 6.00 0.00 0.00
for cleaning / washing / curing Day 2.00 0.00 0.00
10 Labour cost for shuttering sqm 120.00 0.00 0.00
ABSTRACT:
A+B+C 0% Rs.
etc.,complete for RCC works of gallery, sluice, spillway crest, spillway d / s
face, energy dissipating structures, training walls, piers, abutments and
such other locations with initial lead upto 1 km and all lifts.
( Cement content : 270 kg / cum with use of super plasticiser,
CA : 0.90 cum, blending ratio of CA--50:30:20, FA : 0.40 cum)
in Rs. in Rs
1 Cement for mix kg 64800 0.00
2 Cement for incidentals @ 3 kg / cu kg 720.00 0.00
Coarse aggregate 40-20 mm cum 108 0.00
Coarse aggregate 20-10 mm cum 64.8 0.00
Coarse aggregate 10 mm below cum 43.2 0.00
3 Fine aggregate ( screened ) cum 96 0.00
4 Super Plasticizer or AEA kg 259.20 0.00
5 Use rate of shuttering sqm 360.00 0.00
6 Scaffolding of shuttering @ 15%
B. MACHINERY:
in Rs. in Rs
1 Batching plant 2 x 1.5 cum Hour 8.00 0.00
Fuel / Energy charges Hour 8.00 0.00
2 Air compressor 7 cmm ( ele ) Hour 8.00 0.00
3 Tipper Hour 32.00 0.00
4 Tower crane 5 t Hour 16.00 0.00
5 Concrete bucket Hour 40.00 0.00
6 10 hp pump ( ele ) Hour 8.00 0.00
7 Needle vibrator 60 mm dia ( ele ) Hour 16.00 0.00
8 Sundries LS 10.00 0.00
C. LABOUR:
in Rs. in Rs
1 Crew for Batching plant Hour 8.00 0.00
2 Crew for Air compressor Hour 8.00 0.00
3 Crew for Tipper ( 4 ) Hour 32.00 0.00
4 Crew for Tower crane ( 2 ) Hour 16.00 0.00
5 Crew for Pump Hour 8.00 0.00
6 Crew for Needle vibrator ( 2 ) Hour 16.00 0.00
7 Mason Class-I Day 4.00 0.00
8 Foreman Day 2.00 0.00
9 mazdoor
for silo ( cement handling ) Day 2.00 0.00
for batching plant Day 2.00 0.00
13
IRR-DAW
for conveyor system Day 2.00 0.00

for laying & vibrating Day 6.00 0.00
for cleaning / washing / curing Day 2.00 0.00
10 Labour cost for shuttering sqm 360.00 0.00
11 Labour cost for scaffolding @ 15%
ABSTRACT:
A. Cost of Materials including seigniorage charges Rs:
A+B+C 0% Rs.
all lifts. ( Cement content : 210 kg / cum with use of super plasticiser,
CA : 0.90 cum, Blending Ratio of CA -- 50:30:20, FA : 0.40 cum)
A. MATERIALS: 17 cum
in Rs. in Rs
Cement for incidentals @ 3 kg kg 51.00
3 Fine aggregate ( screened ) cum 6
4 Super plasticizer kg 14.28
6 Use rate of scaffolding @ 15%
B. MACHINERY:
in Rs. in Rs
1 Concrete mixer 300 / 200 ltr ( ele ) Hour 8.0
C. LABOUR:
in Rs. in Rs
1 Crew for Concrete mixer Hour 8.00
3 Crew for Needle vibrator Hour 8.00
5 mazdoor
for batching cement ( cement handl Day 2.00
for batching other materials Day 9.00
for loading mortar pans Day 4.00
for laying Day 3.00
for conveying concrete Day 17.00
6 Labour cost of shuttering sqm 17.00
7 Labour cost of scaffolding @ 15%
ABSTRACT:
A+B+C 0% Rs.
down size approved, clean, hard, graded aggregates with placing and
sinking plums of size 150 to 80 mm upto 15 percent for gravity type
structures including cost of all materials, machinery, labour, formwork,
scaffolding, cleaning, batching, mixing, placing in position, levelling,
vibrating, finishing, curing etc.,complete with initial lead upto 1 km and
all lifts. ( Cement content : 204 kg / cum of concrete with use of plums
14
IRR-DAW
and super plasticiser, CA : 0.77 cum, Blending Ratio of CA : 50:30:20,

FA : 0.34 cum, plums of size 150 to 80 mm : 0.25 cum)
in Rs. in Rs
3 Plums of size 150 to 80 mm cum 5.25
5 Super Plasticizer kg 17.14
6 Use rate of shuttering for 40 uses sqm 21.00
B. MACHINERY:
in Rs. in Rs
1 Concrete mixer 300 / 200 ltr ( ele ) Hour 8.00 0.00 0.00
2 10 hp pump ( ele ) Hour 1.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
6 mazdoor
for loading plums Day 1.00
for laying concrete and plums Day 4.00
for conveying plums Day 3.00
7 Labour for shuttering sqm 21.00
8 Labour for scaffolding @ 15%
ABSTRACT:
A. Cost of Materials including seigniorage charges
C. Cost of Labour
A+B+C 0%
Rate per/ CU.MTS=(A+B+C+D) /21
etc.,complete for plain concrete works with initial lead upto 1 km and all
lifts. ( Cement content 190 kg / cum with use of super plasticiser,
CA : 0.90 cum, Blending Ratio of CA : 65:35, FA : 0.40 cum)
in Rs. in Rs
Cement for incidentals @ 3 kg/ cum kg 57.00
4 Super plasticizer kg 14.44
B. MACHINERY:
15
IRR-DAW
in Rs. in Rs
2 10 hp pump ( ele ) Hour 1.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
1 Crew for Concrete mixer Hour 8.00 0.00 0.00
3 Crew for Needle vibrator Hour 8.00 0.00 0.00
5 mazdoor
for batching cement ( cement handl Day 2.00 0.00 0.00
for batching other materials Day 9.00 0.00 0.00
for loading mortar pans Day 4.00 0.00 0.00
for laying Day 3.00 0.00 0.00
for conveying concrete Day 19.00 0.00 0.00
for cleaning / washing / curing Day 1.00 0.00 0.00
6 Labour cost of shuttering sqm 19.00 0.00 0.00
7 Labour cost of scaffolding @ 15% 0.00
ABSTRACT:
A+B+C 0% Rs.
etc.,complete for plain concrete works with initial lead upto 1 km and all
lifts. ( Cement content : 240 kg / cum with use of super plasticiser,
CA : 0.80 cum, Blending Ratio of CA -- 65:35, FA : 0.44 cum)
in Rs. in Rs
4 Super plasticiser kg 14.40
B. MACHINERY:
in Rs. in Rs
C. LABOUR:
in Rs. in Rs
5 mazdoor
for laying Day 3.00
16
IRR-DAW
6 Labour cost of shuttering sqm 15.00

7 Labour cost of scaffolding @ 15%
ABSTRACT:
C. Cost of Labour
A+B+C 0% Rs.
etc.,complete for RCC works of spillway bridge, blockouts and such
other similar structures with conjested reinforcement with initial lead
upto 1 km and all lifts. ( Cement content : 300 kg / cum with use of
super plasticiser, CA : 0.80 cum, Blending Ratio of CA -- 65:35,
FA : 0.44 cum)
in Rs.
4 Super plasticiser ltr 16.80
6 Scaffolding of shuttering @ On 5 100%
Add seigniorage charges on CA @ (Included in material rates) Rs:
Add seigniorage charges on FA @ (Included in material rates) Rs:
B. MACHINERY:
in Rs. in Rs
1 Concrete mixer 300 / 200 ltr ( ele Hour 8.00 0.00 0.00
2 10 hp pump ( ele ) Hour 1.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
5 mazdoor
for batching cement ( cement handli Day 2.00 0.00 0.00
for cleaning/ washing/ curing Day 1.00 0.00 0.00
6 Labour cost of shuttering sqm 35.00 0.00 0.00
7 Labour cost of scaffolding @ 100% 0.00
ABSTRACT:
A+B+C 0% Rs.
IRR-DAW-2-10 Providing and forming porous concrete body drain of size 68.5 x 68.5 cm
with 23 cm diameter central hole using cement and 20 mm down
approved, clean, hard, graded coarse aggregates in 1 : 3.50 proportion by
volume including cost of all materials, machinery, labour, formwork, curing
(M15 Cement content : 408kg/cum, CA : 1cum,
Blending Ratio of CA -- 65:35)
17
IRR-DAW
in Rs. in Rs
1 Cement kg 3492.48 0.00 0.00
2 Coarse aggregate 20-10 mm cum 5.564 0.00 0.00
3 Coarse aggregate 10-4.75 mm cum 2.996 0.00 0.00
4 Use rate of shuttering sqm 76.00 0.00 0.00
Add seigniorage charges on CA @ (Included in material rates) Rs: 0.00
Add seigniorage charges on FA @ (Included in material rates) Rs: 0.00
B. MACHINERY:
in Rs. in Rs
2 10 hp pump ( ele ) Hour 0.50 0.00 0.00
C. LABOUR:
in Rs. in Rs
4 mazdoor
for laying & packing concrete Day 2.00 0.00 0.00
5 Fitter shuttering Day 3.00 0.00 0.00
ABSTRACT:
A+B+C 0% Rs.
Rate per/ Running Metre=(A+B+C+D) /20 Rs:
(a) strength not less than 20 N / sq mm ) grade cement concrete using 20 mm
down size approved, clean, hard, graded aggregates including cost of
all materials, machinery, labour, formwork, centering, scaffolding, cleaning,
etc.,complete for RCC solid parapet consisting of 35 cm x 20 cm kerb,
35 cm x 35 cm x 1 m pillars spaced approximately at 3.35 m c / c, 12.5 cm
thick wall 80 cm height with 12.5 cm thick and 35 cm wide coping slab for
wall and 12 .5 cm thick 40 cm x 40 cm coping for pillars with top edges of
kerb and coping chamferred / rounded as directed etc., complete
( excluding cost of providing and placing reinforcement steel and gate )
with initial lead upto 1 km and all lifts.
( Cement content 300 kg / cum with use of super plasticiser( 0.4% by wt.
of cement), CA : 0.80 cum, Blending Ratio of CA--65:35, FA : 0.44 cum)
in Rs. in Rs
1 Cement mix kg 2601
Cenent for incidentals @ 5 kg / cum kg 180.00
Coarse aggregate 10-4.75 mm cum 2.42
7 Sundries LS 2.00
B. MACHINERY:
in Rs. in Rs
2 Needle vibrator 40 mm ( ele ) Hour 8.00
C. LABOUR:
18
IRR-DAW

3 Crew for Vibrator Hour 8.00
6 mazdoor
for batching cement ( cement handli Day 2.00
for laying & packing concrete Day 2.00
for curing & miscellaneous Day 2.00
ABSTRACT:
A+B+C 0% Rs.
Rate per/ Running Metre=(A+B+C+D) /36 Rs:
(b) strength not less than 20 N / sq mm ) grade cement concrete using 20 mm
etc.,complete for RCC ornamental parapet consisting of 35 cm x 20 cm
kerb, 35 cm x 35 cm x 1 m pillars spaced approximately at 3.5 m apart,
20 cm x 15 cm posts 80 cm height approximately 30 cm c / c with 12.5 cm
thick and 35 cm wide coping slab for posts and pillars with top edges of
kerb and coping chamferred or rounded as directed etc., complete
( excluding cost of providing and placing reinforcement steel and gate ) with
( Cement content : 300 kg / cum with use of super plasticiser(0.4% by wt.
of cement, CA : 0.80 cum, Blending Ratio of CA--65:35, FA : 0.44 cum)
in Rs. in Rs
1 Cement mix kg 2100
Cenent for incidentals @ 5 kg / cum kg 35.00
7 Sundries LS 2.00
B. MACHINERY:
in Rs. in Rs
1 Concrete mixer 300 / 200 ltr ( ele Hour 8.00 0.00
2 Needle vibrator 40 mm ( ele ) Hour 8.00 0.00
3 10 hp pump ( ele ) Hour 0.50 0.00
C. LABOUR:
in Rs. in Rs
1 Crew for Concrete mixer Hour 8.00 0.00
2 Crew for Pump Hour 0.50 0.00
3 Crew for Vibrator Hour 8.00 0.00
4 Mason Class-I Day 2.00 0.00
5 work inspector Day 1.00 0.00
6 mazdoor
for batching cement ( cement handli Day 2.00 0.00
for batching other materials Day 9.00 0.00
for loading mortar pans Day 4.00 0.00
for laying & packing concrete Day 2.00 0.00
for conveying concrete Day 7.00 0.00
for curing & miscellaneous Day 2.00 0.00
7 Labour for shuttering sqm 115.00 0.00
19
IRR-DAW

ABSTRACT:
A+B+C 0% Rs.
Rate per/ Running Meter =(A+B+C+D) /36 Rs:
IRR-DAW-2-13 Providing and laying insitu M- 25 ( 28 days cube compressive strength not
less than 25 N / sq mm ) grade cement concrete using 20 mm down size
approved, clean, hard, graded aggregates for wearing coat including cost
of all materials, machinery, labour, formwork, cleaning, batching, mixing,
placing in position in alternate panels, levelling, compacting, finishing,
curing, packing joints with asphalt mortar etc., complete
( Cement content : 300 kg / cum with use of super plasticiser(0.4% by
wt. of cement, CA : 0.80 cum, Blending Ratio of CA--65:35, FA : 0.45 cum)
in Rs. in Rs
6 Sundries ( asphalt mortar etc ) LS 5.00
20
IRR-DAW
B. MACHINERY:
in Rs. in Rs
1 Concrete mixer 300/200 ltr ( diesel ) Hour 8.00
C. LABOUR:
in Rs. in Rs
5 mazdoor
for batching materials Day 9.00
for laying & compacting Day 5.00
for cleaning/ washing/ curing Day 1.00
ABSTRACT:
A+B+C 0% Rs.
Rate per/ Cubic .MetreTS=(A+B+C+D) /14 Rs:
IRR-DAW-2-14 Pre-cooling to control placement temperature of cement concrete in the

range of 18 to 21 C at the concrete placement point by inundation of coarse
aggregates and adding flaked ice as part of mixing water including cost of
all materials, machinery, labour etc., complete with all leads and lifts.
DATA: Consider M-15 grade concrete using 80 mm down CA and 30-50 mm
slump.

UNIT:
in Rs. in Rs
1 Sundries ( amonia gas etc) LS 3.00 0.00 0.00
0.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs
1 Ice maker unit consisting of: Hour 24.00 0.00 0.00
Compressor 125 hp - 1 No
Condenser with 30 hp motor - 1 No.
Ice makers 10 t / day each - 3 Nos.
Pump 2 hp for ice cutting - 3 Nos.
Pump 2 hp for pumping water-3 Nos.
Screw conveyor with 15 hp motor -1
Ice elevator with 5 hp motor - 1 No.
Fuel / Energy charges for system Hour 24.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
1 Crew for Ice maker unit Hour 24.00 0.00 0.00
2 mazdoor
for Ice chamber ( 2 x 3 ) Day 6.00 0.00 0.00
for miscellaneous works ( 1 x 3 ) Day 3.00 0.00 0.00
ABSTRACT:
D A+B+C 0% Rs.
21
IRR-DAW
IRR-DAW-2-15 Conveying and fixing elastomeric bearing for spillway bridge including
cleaning and preparing surface, mixing and applying adhesive, fixing bearing
in correct position etc., including cost of all materials except bearings,
machinery, labour etc., complete with all leads and lifts.
UNIT:
A. MATERIALS: 6.00 Nos.
in Rs. in Rs
1 Synthetic adhesive ( Resin + Hardenkg 0.60 0.00 0.00
2 Sundries LS 2.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs
1 Nil 0.00 0.00 0.00
0.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
1 Marker / Erector Day 1.00 0.00 0.00
3 mazdoor Day 2.00 0.00 0.00
ABSTRACT:
D. Add for contractor's profit and overheads on
A+B+C 0% Rs.
Rate per/ Each=(A+B+C+D) /6 Rs:
IRR-DAW-2-16 Providing and constructing 150 mm dia hume pipe weep holes for
concrete / masonry walls including providing 20 x 20 x 20 cm size porous
concrete block made of cement and 20 mm down coarse aggregate in
1 : 4 proportion including 10 cm thick sand backing at the junction of wall
and soil back fill, cost of all materials, machinery, labour etc., complete
with lead upto 1 km and all lifts. DATA & RATE ANALYSIS
in Rs. in Rs
1 150 mm dia hume pipe Rm 2.90 0.00
2 Cement kg 3.00 0.00
3 20 - 10 mm coarse aggregate cum 0.01 0.00
4 Sand ( unscreened ) cum 0.02 0.00
Add seigniorage charges on CA @ (Included in material rates) Rs:
Add seigniorage charges on FA @ (Included in material rates) Rs:
B. MACHINERY:
in Rs. in Rs
1 Nil 0.00 0.00
0.00 0.00
C. LABOUR:
in Rs. in Rs
1 Mason Class-II Day 0.25 0.00
2 mazdoor Day 0.25 0.00
ABSTRACT:
A+B+C 0% Rs.
Rate per/ Running Meter.=(A+B+C+D) /3 Rs:
22
IRR-DAW
IRR-DAW-2-17 Providing and forming expansion joint for spillway bridge consisting of
75 x 75 x 6 mm angles 2 numbers provided with 25 cm long 12 mm dia.
anchors fixed to both flanges at 15 cm c /c and 140 x 6 mm plate welded
on top of one of the angle including cost of all materials, machinery, labour,
providing and fixing 38 mm thick joint filler board matching the thickness of
wearing coat, painting etc., complete with lead upto 1 km and all lifts.
in Rs. in Rs
1 Structural steel plate kg 50.70 0.00
2 Structural steel angle kg 104.50 0.00
3 12 dia steel anchors kg 27.40 0.00
4 Welding electrodes Nos 70.00 0.00
5 Joint filler board 19 mm thick sqm 1.00 0.00
6 Sundries ( cutting gas / paint etc ) LS 1.50 0.00
B. MACHINERY:
in Rs. in Rs
1 Welding set Hour 8.00 0.00
2 Sundries (cutting torch/ welding gun LS 2.00 0.00
C. LABOUR:
in Rs. in Rs
1 Marker / Fabricator / Erector Day 1.50 0.00
2 Gas cutter / Welder Day 1.50 0.00
ABSTRACT:
A+B+C 0% Rs.
Rate per/ Running Meter.=(A+B+C+D) /7.5 Rs:
IRR-DAW-3 MASONRY & GUNITING WORKS :
IRR-DAW-3-1 Providing and constructing un-coursed rubble stone masonry using

approved stones in cement mortar 1 : 3 proportion including cost of all
materials, machinery, labour, scaffolding, cleaning, packing mortar, wedging
stone chips, curing etc., complete with initial lead upto 1 km and all lifts.
( Cement content : 190 kg/cum of masonry, rubble stones : 0.85 cum,
stone chips : 0.15 cum/cum, FA : 0.4 cum)
in Rs. in Rs
1 Cement for mortar kg 4750
2 Rubble stones cum 21.25
3 Stone chips cum 3.75
4 Sand ( screened ) cum 10
Add seigniorage charges for sand (included in material cost) Rs:
Add seigniorage charges for Stone (included in material cost) Rs:
B. MACHINERY:
in Rs. in Rs
C. LABOUR:
in Rs. in Rs
23
IRR-DAW
5 Mason Class-II Day 4.00

6 Chavali Day 16.00
7 mazdoor
for batching sand Day 6.00
for laying & packing mortar Day 10.00
for loading chips Day 1.00
for washing rubble / finishing / curin Day 4.00
for conveying mortar / chips Day 12.00
ABSTRACT:
A+B+C 0% Rs.
Rate per/ cu.metre.=(A+B+C+D) /25 Rs:
IRR-DAW-3-2 Providing and constructing un-coursed rubble stone masonry using approved stones in
cement mortar 1 : 4 proportion including cost of all materials, machinery, labour, scaffolding,
cleaning, packing mortar, wedging stone chips, curing etc., complete with initial lead upto
1 km and all lifts.
stone chips : 0.15 cum/cum, FA : 0.4 cum)
For 1 cum masonry :-
in Rs. in Rs
1 Cement for mortar kg 3575 0.00 0.00
2 Rubble stones cum 21.25 0.00 0.00
3 Stone chips cum 3.75 0.00 0.00
4 Sand ( screened ) cum 10 0.00 0.00
Add seigniorage charges for sand (included in material cost) Rs: 0.00
Add seigniorage charges for Stone (included in material cost) Rs: 0.00
B. MACHINERY:
in Rs. in Rs
1 Concrete mixer 300 / 200 ltr Hour 8.00 0.00 0.00
2 10 hp pump Hour 1.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
5 Mason Class-II Day 4.00 0.00 0.00
6 Chavali Day 16.00 0.00 0.00
7 mazdoor
for batching sand Day 6.00 0.00 0.00
for laying & packing mortar Day 10.00 0.00 0.00
for loading chips Day 1.00 0.00 0.00
for washing rubble / finishing / curin Day 4.00 0.00 0.00
for conveying mortar / chips Day 12.00 0.00 0.00
labour component/unit qty 0.00
Add contractor's profit and overhead charges 0 0.00
labour component/unit qty (including contractor's profit) 0.00
ABSTRACT:
A+B+C 0% Rs.
24
IRR-DAW
IRR-DAW-3-3 Providing and constructing coursed rubble face stone masonry using
approved rubble stones in cement mortar 1 : 3 proportion including cost
of all materials, machinery, labour, scaffolding, ramps, cleaning, packing
mortar, wedging stone chips, curing etc., with initial lead upto 1 km
and all lifts.
stone chips : 0.15 cum/cum, FA : 0.375 cum,
CR stones 30 x 30 x 45 cm : 9.75 No, CR stones 30 x 30 x 60 cm : 3.25 No)
in Rs. in Rs
2 Coursed rubble stone 30 x 30 x 45 Nos 244 0.00 0.00
6 Sand ( screened ) cum 9.375 0.00 0.00
B. MACHINERY:
in Rs. in Rs
2 10 hp pump ( ele ) Hour 1.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
4 Stone chiseller Cl -II Day 7.00 0.00 0.00
7 Chavali Day 16.00 0.00 0.00
8 mazdoor
ABSTRACT:
A+B+C 0% Rs.
25
IRR-DAW
IRR-DAW-3-4 Providing and constructing coursed rubble face stone masonry using
approved rubble stones in cement mortar 1 : 4 proportion including cost of
all materials, machinery, labour, scaffolding, ramps, cleaning, packing
mortar, wedging stone chips, curing etc., with initial lead upto 1 km and
all lifts.
CR stones 30 x 30 x 45 cm : 9.75 No, CR stones 30 x 30 x 60 cm : 3.25 No)
DATA: Thickness of CR face stone masonry assumed : 75.00 cm
For 1 cum masonry CR stones 30 x 30 x 45 cm. 9.75 Nos.
CR stones 30 x 30 x 60 cm. : 3.25 Nos.
Rubble stones : : 0.35 cum
Sand : 0.38 cum.
Cement : 134.00 kg
Average output of 300 / 200 ltr mixer : 10.00 cum / day
Daily output of masonry for 10 cum mortar with 37.50 % mortar content 26.65 cum
However, as face stone masonry is comparatively slower 25 cum / day
considered.
Labour requirement: Stone Chiseller Cl II : 7.00 Nos.
Other category same as in item 32

UNIT:
in Rs. in Rs
B. MACHINERY:
in Rs. in Rs
2 10 hp pump ( ele ) Hour 1.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
7 Chavali Day 16.00 0.00 0.00
8 mazdoor
ABSTRACT:
A+B+C
Rate per/ cu.metre.=(A+B+C+D) /25
IRR-DAW-3-5 Providing and constructing chisel drafted and hammer dressed face
stone masonry with approved stones in cement mortar 1 : 3 proportion
including cost of all materials, machinery, labour, scaffolding, ramps,
cleaning, packing mortar, wedging stone chips, curing etc.,complete with
Dressed stones 30 x 30 x 45 cm : 10 No, Dressed stones 30 x 30 x 60 cm : 3.40 No)
26
IRR-DAW

in Rs. in Rs
B. MACHINERY:
in Rs. in Rs
2 10 hp pump ( ele ) Hour 1.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
4 Stone chiseller Cl -I Day 14.00 0.00 0.00
8 Chavali Day 16.00 0.00 0.00
9 mazdoor
ABSTRACT:
A+B+C
IRR-DAW-3-6 Providing and constructing chisel drafted and hammer dressed face
stone masonry with approved stones in cement mortar 1 : 4 proportion
including cost of all materials, machinery, labour, scaffolding, ramps,
cleaning, packing mortar, wedging stone chips, curing etc.,complete with
Dressed stones 30 x 30 x 45 cm : 10 No, Dressed stones 30 x 30 x 60 cm : 3.40 No)
UNIT:
in Rs. in Rs
B. MACHINERY:
in Rs. in Rs
2 10 hp pump ( ele ) Hour 1.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
27
IRR-DAW

4 Stone chiseller Cl -I Day 14.00 0.00 0.00
8 Chavali Day 16.00 0.00 0.00
9 mazdoor
ABSTRACT:
A+B+C
IRR-DAW-3-7 Providing cement mortar pointing to coursed rubble face stone masonry
50 mm deep in CM 1 : 2 proportion by volume including raking and cleaning
joints, pressing mortar into joints, cost of all materials, labour, scaffolding,
finishing, curing etc., complete with initial lead upto 1 km and all lifts.
DATA: Consider 100 sqm area for analysis.
Considering 15 to 20 mm wide and 50 mm deep joints the quantity of
cement mortar required will be about 0.70 cum for 100 sqm of pointing.
Quantity of mortar with 5 to 10 % wastage : 0.75 cum
For 0.75 cum mortar : Cement : 455.446 kg Sand : 0.735 cum

UNIT:
in Rs. in Rs
1 Cement kg 455.446 0.00 0.00
B. MACHINERY:
in Rs. in Rs
1 NIL 0.00 0.00 0.00
(Manual mixing ) 0.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
1 Mason Cl- I Day 10.00 0.00 0.00
2 mazdoor Day 10.00 0.00 0.00
ABSTRACT:
A+B+C
Rate per/ Sq metre.=(A+B+C+D) /100
IRR-DAW-3-8 Providing cement mortar pointing to coursed rubble face stone masonry
50 mm deep in CM 1 : 3 proportion by volume including raking and cleaning
joints, pressing mortar into joints, cost of all materials, labour, scaffolding,
finishing, curing etc., complete with initial lead upto 1 km and all lifts.
Considering 15 to 20 mm wide and 50 mm deep joints the quantity of
cement mortar required will be about 0.70 cum for 100 sqm of pointing.
Quantity of mortar with 5 to 10 % wastage : 0.75 cum
Cement : 321.8 kg Sand : 0.735 cum

UNIT:
in Rs. in Rs
1 Cement kg 321.80 0.00 0.00
28
IRR-DAW
B. MACHINERY:
in Rs. in Rs
1 NIL 0.00 0.00 0.00
Manual mixing ) 0.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
1 Mason Cl- I Day 10.00 0.00 0.00
2 mazdoor Day 10.00 0.00 0.00
ABSTRACT:
A+B+C
Rate per/ Sq..metre.=(A+B+C+D) /100
29
IRR-DAW
IRR-DAW-4 CONTRACTION JOINT WORKS:
IRR-DAW-4-1 Providing 25 mm thick guniting to rock or masonry surface in cement

mortar 1 : 3 proportion by weight including cost of all materials, machinery,
labour, raking-out and cleaning joints, scaffolding wherever required and all
other ancillary operations etc., complete with initial lead upto 1 km and
all lifts.
in Rs. in Rs
1 Cement kg 609.90
3 Use rate of grout hose 25 m Hour 8.00
4 Use rate of water hose 25 m Hour 8.00
5 Use rate of guniting nozzle Hour 8.00
6 Sundries LS 2.00
Add seigniorage charges for sand (included in material cost)
B. MACHINERY:
in Rs. in Rs
1 Guniting equipment Hour 8.00
4 Sundries LS 2.00
C. LABOUR:
in Rs. in Rs
1 Crew for Guniting equipment Hour 8.00
3 Crew for pump Hour 1.00
4 Mason Cl II Day 1.00
5 mazdoor
for cement handling Day 2.00
for sand Day 2.00
mazdoor for other works Day 2.00
ABSTRACT:
Total Rs:
Add for scaffolding 0%
Total Rs:
A+B+C
Rate per/ Sq..metre.=(A+B+C+D) /36
IRR-DAW-4-2 Providing and constructing contraction joints by fixing 16 SWG 60 cm

wide annealed copper sheets in two lines with 8 mm dia steel dowel
rods on either side at one metre interval, forming 125 x 125 mm size groove
in between copper strips for filling asphalt including fixing 15 mm dia two
legged G.I pipe with U - bend at bottom for circulation of steam at intervals
and forming 150 mm dia formed drain behind water seals including cost of
all materials, machinery, labour, filling asphalt, circulation of steam through
pipes etc., complete with all leads and lifts. consider 12 m height of
contraction joint for analysis.
in Rs. in Rs
1 Copper sheet 16 SWG kg 215.00 0.00 0.00
2 Reinforcement steel 8 mm dia kg 30.00 0.00 0.00
3 GI pipe 15 mm dia Rm 24.00 0.00 0.00
4 Asphalt kg 192.00 0.00 0.00
5 Elbows / Nipple / Plugs etc., LS 5.00 0.00 0.00
6 Soldering materials LS 40.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs
1 Steam circulation arrangement LS 8.00 0.00 0.00
Fuel charges ( gas for heating ) LS 10.00 0.00 0.00
C. LABOUR:
30
IRR-DAW
in Rs. in Rs
1 Welder Day 1.00 0.00 0.00
2 Tinsmith Day 1.00 0 0.00
3 Bar bender Day 0.50 0 0.00
4 Pipe fitter Day 0.50 0.00 0.00
6 mazdoor Day 1.00 0.00 0.00
ABSTRACT:
A+B+C 0.00
0
Rate per/Running metre.=(A+B+C+D) /12 0.00
IRR-DAW-4-3 Providing and constructing contraction joints by fixing 310 mm wide

central bulb type approved quality PVC water stop in two lines with 8 mm
diameter steel dowel rods on either side at 1m interval, forming 125 x 125
mm size groove in between two water stops, providing & fixing 15 mm dia
two legged G.I pipe with U-bend at bottom for circulation steam at interval,
forming 150 mm diameter formed drain behind water seals including filling
groove with asphalt, circulation of steam at intervals, cost of all materials,
machinery, labour etc., complete with all leads andlifts.

A. MATERIALS: 12.00 Rm.
in Rs. in Rs
1 PVC water stops 310 mm wide Rm 24.50 0.00 0.00
3 GI pipe 15 mm dia Rm 24.00 0.00 0.00
4 Asphalt kg 192.00 0.00 0.00
5 Elbows / Nipple / Plugs etc., LS 5.00 0.00 0.00
6 Vulcanizing materials LS 25.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs
1 Steam circulation arrangement LS 8.00 0.00 0.00
Fuel charges ( gas for heating ) LS 10.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
1 Welder Day 0.50 0.00 0.00
5 mazdoor Day 1.00 0.00 0.00
ABSTRACT:
A+B+C 0.00
0
Rate per/ Running .metre.=(A+B+C+D) /12 0.00
IRR-DAW-4-4 Providing and constructing contraction joints by fixing 16 SWG 60 cm

wide annealed copper sheets in single line with 8 mm dia steel dowel
rods on either side at 1 metre interval including cost of all materials,
machinery, labour etc., complete with all leads and lifts.
in Rs. in Rs
1 Copper sheet 16 SWG kg 77.00 0.00 0.00
3 Soldering materials LS 10.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs
1 Sundries such as soldering gun etc. LS 3.00 0.00 0.00
Fuel charges ( gas ) LS 5.00 0.00 0.00
31
IRR-DAW
C. LABOUR:
in Rs. in Rs
1 Welder Day 0.5 0.00 0.00
2 Tinsmith Day 0.5 0 0.00
5 mazdoor Day 0.5 0.00 0.00
ABSTRACT:
A+B+C 0.00
0
Rate per/Running metre.=(A+B+C+D) /8.7 0.00
IRR-DAW-4-5 Providing and constructing contraction joints by fixing 23 cm wide central

bulb type PVC water stop in single line supported by 10 mm dia steel
dowel rods on either side at 1 metre interval including cost of all materials,
machinery, labour, valcunising joints etc., complete with all leads and
lifts.
DATA: Consider 1.5 x 2.1 m size gallery contraction joint for analysis.
Length of contraction joint at water seal location 8.70 m.
Materials required: PVC water seal 23 cm wide 9.00 m.
10 mm torsteel rods 10.00 kg

UNIT:
in Rs. in Rs
1 PVC water seal 23 cm wide Rm 9.00 0.00 0.00
3 Vulcanising materials LS 2.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs
1 Sundries such as heater etc., LS 0.50 0.00 0.00
Fuel charges for heating LS 0.50 0.00 0.00
Total hire charges of Machinery 0.00
C. LABOUR:
in Rs. in Rs
1 Welder Day 0.50 0.00 0.00
4 mazdoor Day 0.50 0.00 0.00
ABSTRACT:
A+B+C 0% Rs.
Rate per/metre=(A+B+C+D) /8.7 Rs:
IRR-DAW-5 EARTH / ROCKFILL EMBANKMENT WORKS :
IRR-DAW-5-1 Providing hearting embankment using selected impervious soil from

approved borrow areas in layers of 25 to 30 cm before compaction
including cost of all materials, machinery, labour, all operations such as
excavation, sorting out, transportation, spreading soil in layer of specified
thickness, breaking clods, sectioning, watering, compacting to density
control of not less than 95 percent or as stipulated using sheep / pad foot
roller etc., complete with initial lead upto 1 km and all lifts.
DATA & RATE ANALYSIS UNIT

in Rs. in Rs
1 NIL 0.00 0.00 0.00
0.00 0.00 0.00
Add seigniorage charges for soil Rs: 0.00
32
IRR-DAW
B. MACHINERY:
in Rs. in Rs
1 Angle dozer 90 hp Hour 5.50 0.00 0.00
2 Shovel 0.85 cum capacity Hour 8.00 0.00 0.00
3 Tippers 5.00 cum capacity 5 Nos. Hour 40.00 0.00 0.00
4 Pump 5 hp ( ele ) Hour 4.00 0.00 0.00
5 Water tanker 8000 ltr Hour 8.00 0.00 0.00
6 Vibratory pad foot roller 8 tonne Hour 6.50 0.00 0.00
7 Sundries LS 2.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
1 Crew for Dozer Hour 5.50 0.00 0.00
5 Crew for Water tanker Hour 8.00 0.00 0.00
6 Crew for Roller Hour 6.50 0.00 0.00
8 mazdoor Day 4.00 0.00 0.00
labour component/unit qty 0.00
Add contractor's profit and overhead charges 0 0.00
labour component/unit qty (including contractor's profit) 0.00
ABSTRACT:
Total Rs: 0.00
D. A+B+C 0% Rs.
Rate per/ cubic metre=(A+B+C+D) /825 Rs:
IRR-DAW-5-2 Providing cut-off trench filling using selected impervious soil from
approved borrow areas in layers of 25 to 30 cm before compaction
including cost of all materials, machinery, labour, all operations such as
excavation, sorting out, transportation, spreading soil to specified thickness,
breaking clods, sectioning, watering, compacting to density control of not
less than 95 percent using sheep foot / pad foot roller as stipulated etc.,
in Rs. in Rs
1 NIL 0.00 0.00 0.00
0.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs
3 Tippers 5.00 cum capacity 6 Nos. Hour 48.00 0.00 0.00
4 Pump 5 hp ( ele ) Hour 4.00 0.00 0.00
7 Sundries LS 2.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
33
IRR-DAW

8 mazdoor Day 4.00 0.00 0.00
ABSTRACT:
D. A+B+C 0% Rs.
IRR-DAW-5-3 Providing casing embankment using semi-pervious soil from approved

borrow areas in layers of 25 to 30 cm before compaction including cost of
all materials, machinery, labour, all other operations such as excavation,
sorting out, transportation, spreading soil in layers of specified thickness,
breaking clods, sectioning, watering, compacting to density control of not
less than 95 percent using sheep foot / pad foot roller as stipulated etc.,
in Rs. in Rs
1 NIL 0.00 0.00 0.00
0.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs
2 Shovel 0.85 cum Hour 8.00 0.00 0.00
3 Tipper 5 cum Hour 32.00 0.00 0.00
4 Pump 5 hp ( ele ) Hour 3.00 0.00 0.00
7 Sundries LS 5.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
8 mazdoor Day 4.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
D. A+B+C 0% Rs.
Rate per/ cubic metre=(A+B+C+D) / 630 Rs:
IRR-DAW-5-4 Providing casing embankment using semi-pervious soil available

from excavation in layers of 25 to 30 cm before compaction including cost
of all materials, machinery, labour, all other operations such as re-excavation,
sorting out, transportation, spreading in layers of specified thickness,
breaking clods, sectioning, watering, compacting to specified density
control of not less than 95 percent using sheep foot / pad foot roller as
stipulated etc.,complete with initial lead upto 1 km and all lifts.
34
IRR-DAW

in Rs. in Rs
1 NIL 0.00
0.00
Add seigniorage charges for soil
B. MACHINERY:

2 Shovel 0.85 cum Hour 8.00
3 Tipper 5 cum Hour 48.00
5 Water tanker 8000 ltr Hour 8.00
6 Vibratory pad foot roller 8 tonne Hour 7.00
7 Sundries LS 5.00
C. LABOUR:

5 Crew for Water tanker Hour 8.00
6 Crew for Roller Hour 7.00
8 mazdoor Day 4.00
ABSTRACT:
C. Cost of Labour
Total
A+B+C 0% Rs.
Rate per/ cubic metre=(A+B+C+D) / 970 Rs:
IRR-DAW-5-5 Providing homogeneous embankment using soil from approved borrow

area in layers of 25 to 30 cm before compaction including cost of all
materials, machinery, labour, all operations such as excavation, sorting out,
transportation, spreading soil in layer of specified thickness, breaking clods,
sectioning, watering, compacting to density control of not less than
95 percent or as stipulated using sheep / pad foot roller etc., complete
in Rs. in Rs
1 NIL 0.00 0.00 0.00
0.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs
3 Tippers 5.00 cum capacity 5 Nos. Hour 40.00
7 Sundries LS 2.00
C. LABOUR:
35
IRR-DAW

8 mazdoor Day 4.00
labour component/unit qty
Add contractor's profit and overhead charges 0
labour component/unit qty (including contractor's profit)
ABSTRACT:
C. Cost of Labour
Total
A+B+C 0%
Rate per/ cubic metre=(A+B+C+D) / 807
IRR-DAW-5-6 Providing embankment adjacent to masonry / concrete structures and filling trial pits
using impervious soil from approved borrow areas in layers of 10 to 15 cm and compacting
each layer to density control of not less than 95 percent using pneumatic tampers or by
vibratory earth rammers including cost of all materials, machinery, labour, picking previous
layer, spreading soil in layer, breaking clods, watering etc., complete with initial lead upto
1 km and all lifts.
UNIT : 81 cum
A. MATERIALS:
in Rs. in Rs
1 Use rate of air hose Hour 16.00
0.00
Add seigniorage charges for soil
B. MACHINERY:

7 Pneumatic tampers 2 Nos. Hour 16.00
8 Sundries LS 1.00
C. LABOUR:

7 Crew for Pneumatic tamper Hour 16.00
9 mazdoor Day 5.00
ABSTRACT:
A+B+C 0% Rs.
IRR-DAW-5-7 Providing and constructing rockfill embankment with 300 mm down graded stones and
36
IRR-DAW
quarry spalls from approved source including cost of all materials, machinery, labour, spreading
stones and spalls in layers, hand packing, wedging, finishing the surface to required slopes

UNIT : 400 cum
A. MATERIALS:
in Rs. in Rs
1 Use rate of drill rod 2.5 m long Rm 387.00 0.00 0.00
Reconditioning charges @ 10% 0.00
2 Use rate of air hose 6 Nos. Hour 60.00 0.00 0.00
3 Explosive small dia kg 118.00 0.00 0.00
4 Electric detonators Nos 159.00 0.00 0.00
5 Detonator ordinary Nos 8.00 0.00 0.00
6 Fuse coil Rm 200.00 0.00 0.00
7 Sundries ( waste tyres etc ) LS 10.00 0.00 0.00
Add seigniorage charges on Stones per cum 18.00 Rs: 0.00
B. MACHINERY:
in Rs. in Rs
1 Air compressor 8.5 cmm ( diesel ) 3 Hour 30.00 0.00 0.00
2 Jack hammer 6 Nos Hour 60.00 0.00 0.00
4 Shovel 0.85 cum Hour 8.00 0.00 0.00
5 Tipper 5 cum Hour 24.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
1 Crew for Air compressor Hour 30.00 0.00
2 Crew for Jack hammer Hour 60.00 0.00
3 Crew for Shovel Hour 8.00 0.00
4 Crew for Tipper Hour 24.00 0.00
5 Crew for Dozer Hour 4.00 0.00
6 Blaster licensed Day 1.00 0.00
7 Helper blaster Day 1.00 0.00
8 work inspector Day 2.00 0.00
9 Mason Class-II Day 2.00 0.00
ABSTRACT:
Total Rs:
A+B+C 0%
IRR-DAW-5-8 Providing and constructing dry rubble rock-toe using rubble and stone chips from
approved source including cost of all materials, machinery, labour, hand packing rubble
and stone chips, finishing top and sides to required slopes etc., complete with initial lead upto
1 km and all lifts.
UNIT : 100 cum
A. MATERIALS:
in Rs. in Rs
1 Use rate of drill rod 1.5 m long Rm 97.00 0.00 0.00
Reconditionong charges @ 10% 0.00
2 Use rate of air hose Hour 15.00 0.00 0.00
3 Explosive small dia kg 30.00 0.00 0.00
4 Electric detonator Nos 40.00 0.00 0.00
5 Detonator ordinary Nos 2.00 0.00 0.00
6 Fuse coil Rm 50.00 0.00 0.00
7 Sundries LS 2.00 0.00 0.00
Add seigniorage charges on Stones per cum 18.00 Rs: 0.00
B. MACHINERY:
in Rs. in Rs
1 Air compressor 8.5 cmm ( diesel ) Hour 7.50 0.00 0.00
37
IRR-DAW

2 Jack hammer Hour 15.00 0.00 0.00
3 Shovel 0.85 cum Hour 2.00 0.00 0.00
4 Tipper 5 cum Hour 6.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
5 Blaster licensed Day 0.50 0.00 0.00
9 mazdoor Day 19.00 0.00 0.00
ABSTRACT:

A+B+C 0%
IRR-DAW-5-9 Providing and constructing dry rubble rock-toe with rubble and stone chips from dump
yard including cost of all materials, machinery, labour, hand packing rubble and stone chips,
finishing top and sides to required slopes etc., complete with initial lead upto 1 km and all
lifts.
Note: Useful rubble and stone chips will be issued at dump yard at the issue rate for usefull rubble /
stone chips. Sorting out and breaking charges included in rate analysis.

A. MATERIALS: UNIT : 100 cum
in Rs. in Rs
1 Useful rubble ( at dump yard ) cum 100.00 0.00 0.00
2 Useful stone chips ( at dump yard ) cum 15.00 0.00 0.00
Add seigniorage charges on Stones Rs: 0.00
B. MACHINERY:
in Rs. in Rs
1 Shovel 0.85 cum Hour 2.00 0.00 0.00
2 Tipper 5 cum Hour 6.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
7 mazdoor Day 21.00 0.00 0.00
ABSTRACT:
A+B+C 0%
IRR-DAW-5-10 Providing and laying 30 cm diameter open jointed hume pipes with collars in rock-toe for
drainage including cost of all materials, machinery, labour etc., complete with lead upto 1 km
and all lifts.

UNIT : 100 Rm
38
IRR-DAW
A. MATERIALS:
in Rs. in Rs
1 Hume pipe 300 mm dia.with collar Rm 100.00 0.00 0.00
0.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs
1 NIL 0.00 0.00 0.00
0.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
1 Mason Cl- II Day 2 0.00 0.00
2 mazdoor Day 6 0.00 0.00
ABSTRACT:
A+B+C 0%
Rate per/ Running metre=(A+B+C+D) / 100
IRR-DAW-6 FILTER & PITCHING WORKS :
IRR-DAW-6-1 Providing and constructing 1.20 m internal diameter and average 3 m height RCC manhole with
60 cm dia. top cover in M-15 grade cement concrete using 20 mm down graded, clean, hard
coarse aggregate, 20 cm thick for bed / sides / top slab / 1.5 m long cut-off wall and 7.5 cm
thick for cover including providing 12 mm dia reinforcement bars at 30 cm c / c bothways for
bed / sides / cut-off wall / top slab / rungs and 8 mm dia bars at 15 cm c / c bothways for cover,
excavation for foundation, providing 30 cm dia hume pipe outlet, cost of all materials, machinery,
labour, formwork, scaffolding, batching, mixing, laying, vibrating, finishing, curing etc., complete
with lead upto 1 km and all lifts.
( Cement content : 300 kg/cum , CA : 0.80 cum, Blending Ratioof CA -- 65:35,
FA : 0.44 cum, superplasticizer (0.4% by wt. of cement)
DATA & RATE ANALYSIS UNIT 1 Each

A. MATERIALS:
in Rs. in Rs
1 Cement kg 1331.70
2 Coarse aggregate 20 to 10 mm cum 2.31
Coarse aggregate 10 to 4.75 mm cum 1.24
5 Reinforcement steel with 5 % wasta kg 163.70
6 Binding wire kg 4.00
7 Hume pipe 300 mm dia Rm 1.00
10 Sundries LS 2.00
Add seigniorage charges on CA @ ( Included in material rate)
Add seigniorage charges on Sand @ ( Included in material rate)
B. MACHINERY:
1 Concrete mixer 300 / 200 ( ele ) 4.00

Fuel / Energy charges 4.00
2 Needle vibrator 40 mm dia ( ele ) 4.00
3 Pump 5 hp ( ele ) 0.50
4 Sundries 1.00
C. LABOUR:

4 mazdoor
for excavation for foundation Day 2.00
for bar bending Day 1.00
for concreting Day 5.00
for excavation for foundation Day 2.00
39
IRR-DAW
for concreting Day 4.00

for curing Day 1.00
ABSTRACT:
A+B+C 0%
Rate per/ each=(A+B+C+D) /1
IRR-DAW-6-2 Providing and constructing longitudinal and cross graded filter drains using sand and 80-20
mm and 20 mm down graded aggregates satisfying specified filter creteria in layers as per
specifications including cost of all materials, machinery, labour, laying to required slopes,
compaction etc. complete with initial lead upto 50 m and all lifts.

UNIT : 100 cum
A. MATERIALS:
in Rs. in Rs
1 Sand ( unscreened ) cum 47.50
5 Coarse aggregate 10 mm down cum 8.16
Add seigniorage charges on Sand @ ( Included in material rate)
B. MACHINERY:
1 NIL 0.00
0.00
C. LABOUR:

2 mazdoor Day 38.00
labour component/unit qty
Add contractor's profit and overhead charges 0
labour component/unit qty (including contractor's profit)
ABSTRACT:

A+B+C 0%
40
IRR-DAW
IRR-DAW-6-3 Providing and constructing 1.40 m thick vertical or inclined graded filter media consisting of
20 cm thick sand layers, 25 cm thick 20 mm down coarse aggregate layers and 50 cm thick
80-20 mm coarse aggregate layer using approved materials satisfying specified filter creteria as
per specifications including cost of all materials, machinery, labour, laying to required slope,
compaction etc., complete with initial lead upto 50 m and all lifts.
UNIT : 100 cum
A. MATERIALS:
in Rs. in Rs
1 Sand ( unscreened ) cum 28.60 0.00 0.00
5 Coarse aggregate 10 mm down cum 8.93 0.00 0.00
Add seigniorage charges on CA @ ( Included in material rate) Rs: 0.00
Add seigniorage charges on Sand @ ( Included in material rate) Rs: 0.00
B. MACHINERY:
in Rs. in Rs
1 NIL 0.00 0.00 0.00
0.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
2 mazdoor Day 38.00 0.00 0.00
ABSTRACT:
A+B+C 0%
IRR-DAW-6-4 Providing and constructing graded filter media below and behind rock-toe consisting of
20 cm thick sand, 25 cm thick 20 - 4.75 mm and 40 cm thick 80 - 20 mm size graded coarse
aggregates satisfying filter creteria as per specifications including cost of all materials, labour,
machinery, laying to required slope, compaction etc., complete with initial lead upto 50 m and
all lifts.
UNIT 100 cum
A. MATERIALS:
in Rs. in Rs
B. MACHINERY:
in Rs. in Rs
1 NIL 0.00 0.00 0.00
0.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
2 mazdoor Day 34.00 0.00 0.00
ABSTRACT:
A+B+C 0%
41
IRR-DAW
IRR-DAW-6-5 Providing and laying filter media consisting of 2 layers of 250 gsm poly-propeline non-woven
filter fabric and 400 mm thick 20 mm down graded coarse aggregate for vertical / inclined
and horizontal filter blanket for embankment including cost of all materials, machinery, labour
etc., complete with lead upto 50 m for aggregate and all leads for fabric and all lifts.
DATA: Consider 100 sqm filter blanket laying.
Filter fabric with 10 % for lapping and wastage ( 2 x 100 x 1.10 ) 220.00 sqm.
20 mm down aggregate ( 100 x 0.4 ) 40.00 cum.

UNIT : 100 sqm
A. MATERIALS:
in Rs. in Rs
1 PP filter fabric 250 gsm sqm 220.00 0.00 0.00
2 20 - 10 mm CA @ 75 % cum 30.00 0.00 0.00
10 mm down CA @ 25 % cum 10.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs
1 NIL 0.00 0.00 0.00
0.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
2 mazdoor Day 14.00 0.00 0.00
ABSTRACT:
A+B+C 0%
Rate per/ sq metre=(A+B+C+D) / 100
IRR-DAW-6-6 Providing and constructing 45 cm thick chimney filter using clean approved sand satisfying
filter creteria including cost of all materials, machinery, labour, compacting etc., complete with
initial lead upto 50 m and all lifts.
UNIT : 100 cum
A. MATERIALS:
in Rs. in Rs
1 Sand ( unscreened) cum 105.00 0.00 0.00
0.00 0.00 0.00
Add seigniorage charges on sand @ ( Included in material rate) Rs: 0.00
B. MACHINERY:
in Rs. in Rs
1 NIL 0.00 0.00 0.00
0.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
2 mazdoor Day 30.00 0.00 0.00
ABSTRACT:
A+B+C 0%
42
IRR-DAW
IRR-DAW-6-7 Providing and constructing 90 cm thick transition cum filter media behind rockfill using
approved sand and 80-20 mm and 20 mm down graded aggregates satisfying the filter creteria
in layers of 30 cm thickness each as per specifications including cost of all materials,
machinery, labour, laying each layer to required slope, compaction etc., complete with initial
lead upto 50 m and all lifts.
A. MATERIALS: UNIT : 100 cum.

in Rs. in Rs
Add seigniorage charges on Sand @ (Included in material rate)
Add seigniorage charges on CA @ ( Included in material rates )
B. MACHINERY:
in Rs. in Rs
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs
2 mazdoor Day 40.00
ABSTRACT:
A+B+C 0%
IRR-DAW-6-8 Providing and constructing 60 cm thick hand packed rough stone revetment with 65 to
75 cm long through stones at 1.50 m c / c over a backing of 45 cm thick graded filter media
consisting of sand, 10 mm and 40 mm size approved graded aggregates laid in layers of 15 cm
thick each including cost of all materials, machinery, labour, laying to required slopes, wedging
with chips, finishing etc. complete with initial lead upto 50 m and all lifts.
A. MATERIALS: UNIT : 100 sqm

in Rs. in Rs
5 Rough stones ( rubble ) 30 to 45 cmcum 57.60 0.00 0.00
6 Through stones 65 to 75 cm long Nos 44.00 0.00 0.00
Add seigniorage charges on Stone @ (Included in material rate) Rs: 0.00
B. MACHINERY:
in Rs. in Rs
1 NIL 0.00 0.00 0.00
0.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
3 mazdoor Day 33.00 0.00 0.00
ABSTRACT:
43
IRR-DAW

A+B+C 0%
Rate per/Square metre=(A+B+C+D) / 100
IRR-DAW-6-9 Providing and constructing 60 cm thick hand packed rough stone revetment with 65 to 75
cm long through stones at 1.50 m c / c over a backing of 60 cm thick graded filter media
consisting of sand, 10 mm and 40 mm size approved graded aggregates laid in layers of 20 cm
thick each including cost of all materials, machinery, labour, laying to required slopes, wedging
with chips, finishing etc. complete with initial lead upto 50 m and all lifts.

UNIT : 100 sqm
A. MATERIALS:
in Rs. in Rs
5 Rough stones ( rubble ) 30 to 45 cmcum 57.60 0.00 0.00
6 Through stones 65 to 75 cm long Nos 44.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs
1 NIL 0.00 0.00 0.00
0.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
3 mazdoor Day 39.00 0.00 0.00
ABSTRACT:
A+B+C 0%
IRR-DAW-6-10 Providing and constructing 60 cm thick hand packed rough stone riprap over a backing of
45 cm thick graded filter media consisting of sand, 10 mm and 40 mm size graded approved
aggregates laid in layers of 15 cm thick each including cost of all materials, machinery,
labour, laying to required slopes, wedging with stone chips etc., complete with initial lead upto
50 m and all lifts.
A. MATERIALS: UNIT : 100 sqm.

in Rs. in Rs
5 Rough stones ( rubble ) cum 60.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs
1 NIL 0.00 0.00 0.00
0.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
44
IRR-DAW

3 mazdoor Day 28.00 0.00 0.00
ABSTRACT:
A+B+C 0%
aggregates laid in layers of 15 cm thick each including cost of all materials, machinery, labour,
laying to required slopes, wedging with stone chips, etc., complete with initial lead upto 50 m
and all lifts.

in Rs. in Rs
4 Stone chips cum 11.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs
1 NIL 0.00 0.00 0.00
0.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
3 mazdoor Day 30.00 0.00 0.00
ABSTRACT:
A+B+C 0%
aggregates laid in layers of 15 cm thick each including cost of all materials, machinery,
labour, laying to required slopes, wedging with stone chips etc., complete with initial lead upto
50 m and all lifts.

in Rs. in Rs
4 Stone chips cum 13.50 0.00 0.00
B. MACHINERY:
in Rs. in Rs
1 NIL 0.00 0.00 0.00
45
IRR-DAW
0.00 0.00 0.00

46
IRR-DAW
C. LABOUR:
in Rs. in Rs
3 mazdoor Day 34.00 0.00 0.00
ABSTRACT:

A+B+C 0%
IRR-DAW-6-13 Providing and laying Hariyala or other approved quality turfing sods for the slopes of earthen
embankments over 20 mm thick sand backing including cost of all materials, machinery,
labour including preparing surface, spreading sand, watering for 15 days etc., complete with
A. MATERIALS: UNIT : 100 sqm.

in Rs. in Rs
2 Hariyala turfing sods sqm 100.00 0.00 0.00
Add seigniorage charges on Sand @ ( Included in material rate ) Rs: 0.00
B. MACHINERY:
in Rs. in Rs
1 NIL 0.00 0.00 0.00
0.00 0.00 0.00
C. LABOUR:
in Rs. in Rs
1 Cartman with double bullock cart Day 2.00 0.00 0.00
2 mazdoor Day 15.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0%
47
IRR-TAW
CHAPTER-II
Standard Data
Index- code
IRR-TAW TUNNEL AND ALLIED WORKS

IRR-TAW-1 EXCAVATION :
IRR-TAW-1-1 Excavation for adit by tunnelling methods in all types of rock including cost of all materials,
machinery, labour, scaling excavated surface, ventilation, lighting, drainage, removing and
hauling the excavated muck outside adit upto specified dump area and all other ancillary
operations etc., complete with initial lead upto 1km and all lifts.
DATA:
DATA & RATE ANALYSIS UNIT : 38.50 cum

A. MATERIALS:
Sl No Perticulars Unit Quantity Rate Amount
in Rs. in Rs.
1 Small dia explosive kg 40.00
2 Delay detonators Nos 54.00
4 Detonating fuse coil Rm 50.00
7 Use rate of water hose Hour 20.00
8 Sundries( paint / template etc ) LS 2.00
B. MACHINERY:
in Rs. in Rs.
1 Drilling jumbo Hour 8.00
3 Jack hammer ( 4 x 5 hrs ) Hour 20.00
4 Pusher leg Hour 20.00
5 Convey mucker Hour 6.50
50
IRR-TAW

6 Dumper ( 1 x 6.5 hrs ) Hour 6.50
8 Ventilation fans 20 hp Hour 1.00
9 Sundries(explosive van / magazine ) LS 2.00
C. LABOUR:
in Rs. in Rs.
1 Crew for Drilling jumbo Hour 8.00
4 Crew for Convey mucker Hour 6.50
7 Crew for ventilation fans Hour 1.00
8 Surveyor Day 0.50
9 Foreman Day 1.00
10 Fitter / Mechanic Day 2.00
11 Blaster ( Licensed ) Day 1.00
12 Helper blasting Day 2.00
13 Hammerman Day 2.00
14 work inspector 1 in each shift Day 3.00
15 Khalasi for mucking shift 4 Nos Day 4.00
16 mazdoor
for mucking shift 4 Nos Day 4.00
for other 2 shifts 1 No each shift Day 2.00
for cleaning & miscellaneous Day 2.00
ABSTRACT:
Total Rs: 0.00
Add for Air and Water line @ 0.00% Rs: 0.00
Add for Ventilation @ 0.00% Rs: 0.00
Add for Lighting @ 0.00% Rs: 0.00
Add for Ele sub-station / Demand charges 0.00% Rs: 0.00
Total Rs: 0.00
D.Add for contractor's profit and
overheads on A+B+C+percentages
above 0% Rs: 0.00
Total cost for cum Rs: 0.00
Rate per cum= (A+B+C+D) /38.50 Rs: 0.00
IRR-TAW-1-2 Excavation for vertical / inclined shaft in all types of soft / hard rock including cost of all
materials, machinery, labour, shoring, strutting, scaling excavated surface, ventilation, lighting,
drainage, removing and hauling excavated muck outside shaft upto specified dump area and
all other ancillary operations etc., complete with initial lead upto 1 km and all lifts.
DATA: Size of shaft assumed : 5.00 m dia

Shape of shaft assumed for excavation : Circular
Depth of shaft assumed : 75 m
Pay-line margin assumed : 0.2 m
Diameter of shaft upto pay line for excavation : 5.4 m
Distance of dump yard from face :within 500 m
Average lift involved for excavation of shaft upto tunnel l : 40 m

A. MATERIALS:
in Rs. in Rs.
2 Electric detonator Nos 65.00
51
IRR-TAW

5 Reconditioning charges @ 10%
8 Use rate of rail track Shift 3.00
9 Use rate of mucking bucket Hour 24.00
B. MACHINERY:
in Rs. in Rs.
4 Pump 20 hp electric Hour 2.00
5 Winch 35 hp electric Hour 28.00
6 Tipping tub 1.5 cum Hour 24.00
C. LABOUR:
in Rs. in Rs.
3 Crew for Pump 10 hp Hour 4.00
4 Crew for Pump 20 hp Hour 2.00
5 Crew for Winch Hour 28.00
6 Surveyor Day 0.50
7 Foreman Day 4.00
11 Hammerman 1 No. in each shift Day 3.00
13 Khalasi for mucking 2 Nos in each shift Day 6.00
14 mazdoor
for mucking 8 Nos in each shift Day 24.00
for other 2 shifts 1 No / shift Day 2.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
above 0% Rs: 0.00
Rate per cum= (A+B+C+D) /30 cum Rs: 0.00
IRR-TAW-1-3 Excavation for tunnel by tunnelling methods in rock not requiring supports including cost
of all materials,machinery, labour, scaling excavated surface, removing under-cuts, ventilation,
lighting, drainage, removing and hauling the excavated muck outside tunnel upto specified
52
IRR-TAW
dump area and all other ancillary operations etc., complete with initial lead upto 1 km and
all lifts.
DATA: Size of tunnel assumed ( finished section ) : 4.50 m dia

Shape of tunnel assumed for excavation : D - shape
Height of tunnel assumed ( finished section ) : 4.50 m
Length of tunnel assumed : 1000 m
Thickness of CC lining : 0.30 m
Diameter of tunnel upto pay line for excavation : 5.50 m
Haulage of excavated muck : By dumpers

A. MATERIALS:
in Rs. in Rs.
B. MACHINERY:
in Rs. in Rs.
3 Jack hammer ( 4 x 6.5 hrs ) Hour 26.00
6 Dumper ( 2 x 6 hrs ) Hour 12.00
C. LABOUR:
in Rs. in Rs.
53
IRR-TAW

8 Surveyor Day 0.50
9 Foreman Day 1.00
16 mazdoor
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
above 0% Rs: 0.00
Rate per cum= (A+B+C+D) /48.60 cum Rs: 0.00
IRR-TAW-1-4 Excavation for tunnel by tunnelling methods including excavation for supports in all types of
soil / rock strata requiring supports ( excluding cost of providing supports ) including cost of
all other materials, machinery, labour, scaling excavated surface, ventilation, lighting, drainage,
removing and hauling the excavated muck outside tunnel upto specified dump area and all
other ancillary operations etc., complete with initial lead upto 1 km and all lifts.

Height of tunnel assumed ( finished section )
Length of tunnel assumed
Thickness of CC lining
Extra excavation for supports
Pay-line margin assumed
Diameter of tunnel upto pay line for excavation
Distance of dump yard from face
Haulage of excavated muck

A. MATERIALS:
in Rs. in Rs.
B. MACHINERY:
in Rs. in Rs.
54
IRR-TAW

6 Dumper ( 2 x 6 hrs ) Hour 12.00
C. LABOUR:
in Rs. in Rs.
8 Surveyor Day 0.50
9 Foreman Day 1.00
13 Hammerman 2 Nos Day 2.00
16 mazdoor
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
above 0% Rs: 0.00
IRR-TAW-1-5 Excavation for tunnel by heading and benching tunnelling methods including excavation
for supports in all types of soil / rock strata requiring supports ( excluding cost of providing
supports ) for roof before benching including cost of all other materials, machinery, labour,
scaling excavated surface, ventilation, lighting, drainage removing and hauling excavated muck
outside tunnel upto specified dump area and all other ancillary operations etc., complete with

Height of tunnel assumed ( finished section ) : 4.50 m
55
IRR-TAW
Thickness of CC lining : 0.30 m

Extra excavation for supports : 0.25 m
Diameter of tunnel upto pay line for excavation : 6.00 m
Haulage of excavated muck : By dumpers

A. MATERIALS:
in Rs. in Rs.
3 Electric detonator Nos 10.00
B. MACHINERY:
in Rs. in Rs.
3 Jack hammer ( 4 x 6.5 hrs ) Hour 26.00
6 Dumper ( 2 x 6.5 hrs ) Hour 13.00
C. LABOUR:
in Rs. in Rs.
7 Crew for Ventilation fan Hour 3.00
8 Surveyor Day 0.50
9 Foreman Day 1.00
56
IRR-TAW

13 Hammerman 2 Nos Day 2.00
15 Khalasi
for pushing muck in heading portion Day 4.00
16 mazdoor
for cleaning &miscellaneous Day 2.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
above 0% Rs: 0.00
NOTE: Where mucking is to be carried out through shaft using winch and mucking tub system
increase the basic rates for items 3, 4 & 5 by 8 percent.
IRR-TAW-1-6 Removing and hauling muck overfallen due to natural causes such as geological faults
etc., out of tunnel including breaking large fragments by blasting if necessary and disposing off
the same in specified dump area or as directed including cost of all materials, machinery,
labour, ventilation, drainage, lighting and all other ancillary operations etc., complete with
DATA: Quantity of overfallen muck considered for analysis : 100 cum


A. MATERIALS:
in Rs. in Rs.
1 Use rate of drill rod Rm 15.00
3 Detonator ( ele ) Nos. 30.00
7 Sundries LS 1.00
B. MACHINERY:
in Rs. in Rs.
2 Jack hammer Hour 4.00
5 Dumper 4.5 cum Hour 12.00
6 Sundries LS 1.00
57
IRR-TAW
C. LABOUR:
in Rs. in Rs.
8 mazdoor Day 8.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
above 0% Rs: 0.00
IRR-TAW-2 DEWATERING & GUNITING WORKS :
IRR-TAW-2-1 Dewatering tunnel by pumping out water collected by natural drainage inside tunnel including
providing sump wherever necessary, cost of all materials, machinery, labour, drainage, lighting,
ventilation and all other ancillary operations etc., complete.
DATA: Consider 20 hp electric pump installed near junction of adit / channel with tunnel.
100 mm dia B Class G.I. Delivery pipe 250 m length.
Daily average 8 hours pumping.
Energy consumption per hour running of pump ( 20 x 0.7 : 14.92 kwhr
Miscellaneous such as indicator lamps etc : 0.08 kwhr
Total / hour: 15.00 kwhr
Use rate of delivery pipe:
Cost of 100 mm dia pipe 250 m @ Rs: 395.00 / Rm Rs: 98750.00
Add for fixtu 5% Rs: 4937.50
Total Rs: 103687.50
Less salvage 10% Rs: 10368.75
Total Rs: 93318.75
Life of G.I. pipe : 20000 hrs
Use rate of delivery pipe per hour: ( cost / life ) Rs: 4.67
RATE ANALYSIS UNIT : 15.00 Kwhr

A. MATERIALS:
in Rs. in Rs.
1 Use rate of G.I.pipe 100 mm dia Hour 1.00
2 Sundries LS 0.10
B. MACHINERY:
in Rs. in Rs.
1 Electric pump 20 hp Hour 1.00
2 Fuel / Energy charges Hour 1.00
3 Sundries(Starter/Switches ete) LS 0.10
C. LABOUR:
58
IRR-TAW
in Rs. in Rs.
1 Crew charges for Pump Hour 1.00 0.00 0.00
2 Laying & dismantling pipe LS 0.05 0.00 0.00
3 mazdoor Day 0.10 0.00 0.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
above 0% Rs: 0.00
Total cost for Kwhr Rs: 0.00
Rate per Kwhr= (A+B+C+D) /15 Kwhr Rs: 0.00
IRR-TAW-2-2 Providing 25 mm thick guniting to sides and arch of tunnel in cement mortar 1 : 3 proportion
by weight including cost of all materials, machinery, labour, ventilation, lighting, drainage
and all other ancillary operations etc., complete with lead upto 1 km and all lifts.
DATA:
DATA & RATE ANALYSIS UNIT : 36.00 sqm

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 600.00
3 Use rate of grout hose 20 m Hour 8.00
5 Use rate of guniting nozzle Hour 8.00
6 Sundries LS 2.00
Add for seiniorage charges on sand (Included in material cost)
B. MACHINERY:
in Rs. in Rs.
1 Guniting equipment Hour 8.00
5 Sundries LS 2.00
C. LABOUR:
in Rs. in Rs.
1 Crew for Guniting equipment Hour 8.00
5 Mason Cl I Day 1.00
6 mazdoor Day 6.00
ABSTRACT:
59
IRR-TAW
Total Rs: 0.00

Total Rs: 0.00
above 0% Rs: 0.00
Total cost for sqm Rs: 0.00
Rate per sqm= (A+B+C+D) /36 sqm Rs: 0.00
IRR-TAW-3 TEMPORARY & PERMANENT SUPPORTS :
IRR-TAW-3-1 Providing and fixing 25 mm diameter steel rock bolts with mechanical / wedge type
anchorage including drilling 35 mm dia holes, providing 15 cm long 20 mm thick steel tapered
wedge, 10 mm thick plate washers and nuts, tightening bolt by torque wrench, cost of all
materials, machinery, labour, ventilation, lighting, drainage and all other ancillary operations
etc., complete with lead upto 1 km and all lifts.
DATA:
DATA & RATE ANALYSIS UNIT : 20.00 Rm

A. MATERIALS:
in Rs. in Rs.
1 Rein.Steel with 5 % wastage kg 86.91
2 Steel plate for washers kg 65.94
Steel plate for wedges kg 6.18
3 M S Nuts for bolts kg 4.00
5 Use rate of air hose 4 Nos Hour 6.00
6 Use rate of water hose 4 Nos Hour 6.00
7 Sundries ( gas for cutting / heating etc ) LS 5.00
B. MACHINERY:
in Rs. in Rs.
6 Sundries ( lathe, blower etc ) LS 5.00
C. LABOUR:
in Rs. in Rs.
5 Fitter Day 0.50
7 Turner Day 1.00
8 Blacksmith Day 1.00
9 Khalasi ( 2 x 0.5 ) Day 1.00
11 mazdoor Day 2.00
ABSTRACT:
60
IRR-TAW

Total Rs: 0.00
Total Rs: 0.00
above 0% Rs: 0.00
Total cost for Rm Rs: 0.00
Rate per Rm= (A+B+C+D) /20 Rm Rs: 0.00
IRR-TAW-3-2 Providing and fixing 25 mm diameter steel rock bolts with resin bond cement capsule
anchorage including drilling 35 mm dia holes, inserting grout capsule, driving bolt,fixing 10 mm
thick plate washers and nuts and tightening the same by torque wrench after hardening of
cement grout, cost of all materials, machinery, labour, ventilation, lighting, drainage and other
ancillary operations etc., complete with lead upto 1 km and all lifts.
DATA: : mm
Length of rock bolt including threaded portion : 2.15 m
DATA & RATE ANALYSIS UNIT : 20.00 Rm

A. MATERIALS:
in Rs. in Rs.
2 Steel plate for washers kg 65.94
3 Resin bond cement grout capsule Nos. 2.00
4 M S Nuts for bolts kg 4.00
8 Sundries(gas for cutting etc) LS 3.00
B. MACHINERY:
in Rs. in Rs.
6 Sundries ( lathe, etc ) LS 3.00
C. LABOUR:
in Rs. in Rs.
5 Fitter Day 0.50
7 Turner Day 1.00
8 Khalasi ( 2 x 0.5 ) Day 1.00
61
IRR-TAW
10 mazdoor Day 2.00

ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
above 0% Rs: 0.00
Total cost for 20 Rm Rs: 0.00
Rate per Rm= (A+B+C+D) /20 Rm Rs: 0.00
IRR-TAW-3-3 Providing, fabricating and fixing in position permanent structural steel supports as per details
including cost of all materials, machinery, labour, cutting, bending, welding, grinding, lighting,
ventilation, drainage and all other ancillary operations etc., complete with initial lead upto
1 km and all lifts.
DATA: Clear diameter of tunnel : 4.50 m

Assuming 30 cm thick concrete lining and about 25 cm extra excavation for fixing permanent
structural steel supports and further 20 cm pay line margin the over all width of tunnel for
excavation will be 6.00 m.
Permanent steel supports are generally provided in the form of quarter / half / full rib depending
on the condition of rock and mode of excavation and size of sections. For the purpose of rate
analysis quarter arch rib fabrication is considered.
Generally, the depth of rib will be considered at 25 mm per metre width of tunnel and the
spacing of ribs depends on the condition of strata to be supported. Average spacing of 5 times
the depth of rib ( generally 2 ribs per blast ) is considered for analysis.
For 6 m wide tunnel the depth of rib required will be 150 mm.
RATE ANALYSIS UNIT : 1.00 tonne

A. MATERIALS:
in Rs. in Rs.
1 Structural steel beams kg 760.00
2 Structural steel plates kg 115.00
3 Steel bars for tie rods & anchors kg 150.00
4 For cutting sections:
Oxygen gas @ 2.4 cum / t cum 2.40
Acetylene gas @ 0.8 cum / t cum 0.80
5 For welding sections:
Electrodes 4 x 300 mm @ 125 Nos / t Nos. 125.00
6 For field connections:
M.S.Bolts / Nuts & Washers kg 50.00
7 Sundries LS 5.00
B. MACHINERY:
62
IRR-TAW
in Rs. in Rs.
1 Bending machine Hour 8.00
2 Welding set Hour 16.00
3 Drilling Jumbo Hour 12.00
4 Sundries ( lathe / drilling / grinder ) LS 30.00
C. LABOUR:
in Rs. in Rs.
1 Crew for Drilling Jumbo Hour 12.00
2 Crew fir Bending machine Hour 8.00
3 For cutting & preparing sections:
Structural steel Marker Day 1.00
Gas cutter Day 2.00
Fitter Day 2.00
Turner / Driller Day 3.00
Khalasi Day 2.00
Helper fabrication Day 4.00
Welder Day 2.00
Khalasi Day 2.00
5 For erection of supports:
Foreman Day 1.00
Structural steel Erector Day 2.00
Helper erector Day 2.00
Khalasi Day 4.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00

above 0% Rs: 0.00
Total cost for tonne Rs: 0.00
Rate per Tonne= (A+B+C+D) /1.00 tonne Rs: 0.00
IRR-TAW-3-4 Providing, fabricating and fixing in position temporary structural steel supports as per details
and dismantling the same before concreting including cost of all materials, machinery, labour,
cutting, bending, welding, grinding, ventilation, lighting, drainage and all other ancillary
operations etc.,complete with initial lead upto 1 km and all lifts.
DATA: As the temperary supports are dismantled before concreting and reused else where the cost of
materials including fabrication will be per use of supports.
As per the data under Item-11 consider 1 tonne suppots for analysis.

A. MATERIALS (for 20 uses):
in Rs. in Rs.
1 Structural steel beams kg 760.00
2 Structural steel plates kg 115.00
3 Tie rods & anchors kg 150.00
4 For cutting sections:
Oxygen gas @ 2.40 cum / t cum 2.40
Acetylene @ 0.8 cum / t cum 0.80
63
IRR-TAW

Electrodes @ 125 Nos / t Nos. 125.00
6 For field connections:
M.S.Bolts / Nuts / Washers kg 50.00
7 Sundries LS 20.00
Total cost of Materials for 20 uses of supports Rs: 0.00
Cost per use considering 20 uses Rs: 0.00
B. MACHINERY (for fabrication):

in Rs. in Rs.
3 Sundries LS 30.00
B. MACHINERY (for erection and dismantling):

in Rs. in Rs.
1 Drilling Jumbo Hour 18.00
2 Sundries LS 10.00
C. LABOUR ( for fabrication ):

in Rs. in Rs.
1 Crew for Bending machine Hour 8.00
2 For cutting & preparing sections:
Structural steel Marker Day 1.00
Gas cutter Day 2.00
Fitter Day 2.00
Turner / Driller Day 3.00
Khalasi Day 2.00
Welder Day 2.00
Khalasi Day 2.00
C. LABOUR ( for erection ):

in Rs. in Rs.
2 For erection of supports:
Foreman Day 1.00
Khalasi Day 4.00
3 For dismantling of supports:
Foreman Day 0.50
Khalasi Day 2.00
ABSTRACT:
B. Hire charges of Machinery for fabrication Rs: 0.00
C. Hire charges of Machinery for erection and dismantlin Rs: 0.00
D. Cost of Labour for fabrication Rs: 0.00
E. Cost of Labour for erection and dismantling Rs: 0.00
Total Rs: 0.00
64
IRR-TAW

Total Rs: 0.00
F.Add for contractor's profit and
overheads on
A+B+C+D+E+percentages above 0% Rs: 0.00
Total cost for one tonne Rs: 0.00
Rate per Tonne= (A+B+C+D+E+F) /1.00 tonne Rs: 0.00
IRR-TAW-3-5 Providing and fixing hard variety cut jungle wood for lagging / blocking locations in tunnel
wherever required including cost of all materials, machinery, labour, fixing in position, lighting,
ventilation, drainage etc complete with all leads and lifts.
DATA:
1 carpenter Cl II and 2 mazdoors are considered for cutting and fixing / cum.
RATE ANALYSIS UNIT : 1.00 cum

A. MATERIALS:
in Rs. in Rs.
1 Cut jungle wood cum 1.05
2 Sundries LS 2.00
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
2 Carpenter Cl II Day 1.00
3 mazdoor Day 2.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
above 0% Rs: 0.00
Rate per/ Cum= (A+B+C+D) /1.00 cum Rs: 0.00
IRR-TAW-4 MASONRY WORKS :
IRR-TAW-4-1 Providing and constructing un-coursed rubble stone masonry with approved stones from
tunnel excavated muck in cement mortar 1 : 6 proportion for backfilling over cuts / slips on
tunnel sides due to geological faults etc., including cost of all materials, machinery, labour,
cleaning,scaffolding, packing mortar, wedging stone chips, curing, ventilation, lighting, drainage
complete with lead upto 1 km and all lifts.
(cement content : 95 kg/cum of masonry, Rubble stones : 0.83 cum,
Stone chips : 0.13 cum, FA : 0.40 cum)
DATA: For 1 cum masonry :- Rubble stones : 0.83 cum Stone chips : 0.13 cum.
Sand : 0.40 cum. Cement : 95 kg.
65
IRR-TAW
Cement mortar preparation : Manual

Output of 1 Mason : 5.00 cum per day

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 950.00
TOTAL Rs:
Add for scaffolding @ 2.5% Rs:
Add seiniorage charges on Rubble @ Rs: (Included in material rate) Rs:
Add seiniorage charges on Sand @ Rs: (Included in material rate) Rs:
B. MACHINERY:
in Rs. in Rs.
Fuel / energy charges Hour 1.00
C. LABOUR:
in Rs. in Rs.
5 mazdoor
for sorting out rubble in dump yard Day 1.00
for conveying rubble Day 2.00
for preparing mortar Day 2.00
for washing rubble / finishing / curing Day 1.00
TOTAL Rs: 0.00
Add for labour for scaffolding @ 0.0% Rs: 0.00
ABSTRACT:
A. Cost of Materials including seiniorage charges Rs: 0.00
Total Rs: 0.00
Total Rs: 0.00
above 0% Rs: 0.00
Total cost for 10 cum Rs: 0.00
IRR-TAW-5 REINFORCEMENT & CONCRETE WORKS :
IRR-TAW-5-1 Providing, fabricating and placing in position reinforcement steel for tunnel RCC works
including cleaning, straightening, cutting, bending, hooking, lapping / welding joints wherever
required, tying with 1.25 mm dia.soft annealed steel wire, including cost of all materials, labour,
machinery, ventilation, lighting, drainage etc.,complete with initial lead upto 1 km and all lifts.
DATA: No welding of reinforcement bars is considered since the diameter of bars for tunnel RCC works
will be generally less than 32 mm.
As concrete will be placed by pneumatic placer, the reinforcement bars have to be held regidly
66
IRR-TAW
in place to prevent displacement due to shooting effect of concrete. This requires about
50 percent more binding wire compared to locations where concrete placement is by manual
labour.
Labour requirement per tonne:
Cleaning and : 2 Bar benders & 2 mazdoors
Marking, bend : 3 Bar benders & 6 mazdoors
Placing in pos : 3 Bar benders & 6 mazdoors
Checking, cor : 1 Bar benders & 1 mazdoors

A. MATERIALS:
in Rs. in Rs.
1 Rein.Steel with 5 % wastage tonne 1.06 0.00 0.00
2 Binding wire 1.25 mm dia kg 13.50 0.00 0.00
3 Sundries ( chairs / spacers etc ) LS 5.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00 0.00 0.00
0.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
1 Bar bender Day 9.00 0.00 0.00
2 mazdoor Day 15.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
above 0% Rs: 0.00
Total cost for one tonne Rs: 0.00
Rate per Mtonne.= (A+B+C+D) /1.00 tonne Rs: 0.00
IRR-TAW-5-2 Providing and laying insitu vibrated M-10 ( 28 days cube compressive strength not less than
10 N / sq mm ) grade cement concrete using 40 mm down size approved, clean, hard,
graded aggregates crushed from tunnel excavated muck for filling and levelling over-cuts
in bed due to geological faults etc., including cost of all materials, machinery, labour, cleaning
bed, batching, mixing, conveying and laying, levelling, compacting, finishing, curing, lighting,
ventilation, drainage etc., complete with initial lead upto 1 km and all lifts. ( Cement
content : 190 kg / cum, CA : 0.90cum, Blending Ratio of CA--50:30:20,
FA : 0.40 cum, Superplasticizer 0.4% by wt. of cement)
DATA: For 1 cum CC :- Coarse aggregates : 0.90 cum Blending ratio : 50 :30 : 20
Fine aggregate : 0.40 cum Cement content : 190 kg Super plasticizer : 0.76 kg

A. MATERIALS:
in Rs. in Rs.
67
IRR-TAW

5 Sundries LS 2.00
Add seiniorage charges on CA @ Rs:( Included in material rate ) Rs: 0.00
Add seiniorage charges on FA @ Rs:( Included in material rate ) Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Batching plant 2 x 1 cum Hour 8.00
2 Agitator car 2 cum Hour 16.00
4 Needle vibrator 40 mm dia Hour 8.00
5 Sundries LS 2.00
C. LABOUR:
in Rs. in Rs.
2 Crew for Agitator car Hour 16.00
7 mazdoor
for cleaning bed Day 2.00
for loading material bin ( Cement ) Day 3.00
for miscellaneous works at BP Day 2.00
for laying concrete Day 7.00
for conveying laying concrete Day 14.00
for cleaning bed Day 2.00
for washing CA / curing Day 2.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
above 0% Rs: 0.00
Rate per/ cum= (A+B+C+D) /28 cum Rs: 0.00
20 N / sqmm ) grade cement concrete using 40 mm and down size approved clean, hard,
graded aggregates crushed from tunnel muck for kerb and bed lining including cost of all
materials, machinery, labour, formwork, batching, mixing, conveying upto placing point in
agitator cars, placing in position, levelling, vibrating, finishing, curing, ventilation, lighting,
drainage and all other ancillary operations etc., complete with lead upto 1 km and all lifts.
( Cement content 270 kg / cum for use of super plasticiser(0.4% by wt. of cement),
CA : 0.90cum, Blending Ratio of CA--50:30:20, FA : 0.40 cum)
Erection & dismantling shuttering :
2 Fitters, 1 Carpentor Cl-II and 5 mazdoors erect 50 sqm shuttering / day.

DATA: Concrete mix details for 50-70 mm slump:
68
IRR-TAW
For 1 cum CC :- Coarse aggregates : 0.90 cum(1300 kg) Blending ratio : 50 :30 : 20
Fine aggregate : 0.40 cum ( 700 kg ) Cement : 270 kg Super plasticizer : 1.08 kg
Requirement of materials per cum of CC:
A. MATERIALS:
in Rs. in Rs.
1 Cement 43 Gr kg 7560.00
Cement for incidentals @ 1 kg / cum kg 28.00
5 Use rate of shuttering for kerb / bed sqm 28.00
6 Sundries LS 2.00
B. MACHINERY:
in Rs. in Rs.
1 Batching plant 2 x 1.00 cum Hour 8.00
2 Agitator car 2 cum ( 2 Nos ) Hour 16.00
3 Needle Vibrator Hour 8.00
4 Pump 10 hp ( Ele ) Hour 8.00
5 Sundries LS 5.00
C. LABOUR:
in Rs. in Rs.
2 Crew for Agitator car Hour 16.00
3 Crew for vibrator Hour 8.00
5 For scaling & cleaning bed
Hammerman Day 2.00
mazdoor Day 6.00
6 For loading cement to BP bin
mazdoor Day 3.00
7 For miscellaneous work at BP
mazdoor Day 2.00
8 For wetting C.A & curing
mazdoor Day 2.00
9 Laying concrete for kerb/ invert
Mason Cl I Day 2.00
Mason Cl II Day 2.00
mazdoor Day 21.00
work inspector Day 1.00
10 Labour charges for shuttering sqm 28.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
69
IRR-TAW

above 0% Rs: 0.00
20 N / sqmm ) grade cement concrete using 40 mm and down size approved clean, hard,
graded aggregates crushed from tunnel muck for sides and arch lining including cost of all
materials, machinery, labour, formwork, batching, mixing, conveying upto placing point in
agitator cars, placing in position, levelling, vibrating, finishing, curing, ventilation, lighting,
drainage and all other ancillary operations etc., complete with lead upto 1 km and all lifts.
( Cement content 270 kg / cum for use of super plasticiser(0.4% by wt. of cement),
DATA:

A. MATERIALS:
in Rs. in Rs.
1 Cement 43 Gr kg 12960.00
5 Use rate of end shuttering sqm 6.00
6 Use rate of steel gantry sqm 100.00
7 Sundries ( placer pipe etc ) LS 5.00
B. MACHINERY:
in Rs. in Rs.
1 Air compressor ( Ele ) 8.5 cmm Hour 16.00
Fuel / Energy charges @ 75 % load Hour 12.00
2 Batching plant 2 x 1.00 cum Hour 12.00
3 Agitator car 2 cum ( 2 Nos ) Hour 32.00
4 Concrete placer pump Hour 16.00
5 Needle Vibrator / Shutter vibrator Hour 8.00
6 Pump 10 hp ( Ele ) Hour 8.00
7 Sundries LS 5.00
C. LABOUR:
in Rs. in Rs.
1 Crew charges for Air compressor Hour 16.00
70
IRR-TAW
2 Crew charges for Batching plant Hour 16.00

3 Crew charges for Agitator car Hour 32.00
4 Crew charges for placer pump Hour 16.00
5 Crew charges for vibrator Hour 8.00
6 Crew charges for Pump Hour 8.00
7 For scaling & cleaning
Stone chiseller Cl II Day 0.50
mazdoor Day 1.00
8 For dismantling / Laying track
Surveyer Day 0.50
Fitter shuttering Day 0.50
Helper shuttering 2 x 0.5 Day 1.00
Khalasi 6 x 0.5 Day 3.00
mazdoor 2 x 0.5 Day 1.00
9 For Moving / Positioning gantry
Surveyer Day 0.50
Foreman Day 0.50
Fitter shuttering Day 0.50
Helper shuttering 2 x 0.5 Day 1.00
Khalasi 6 x 0.5 Day 3.00
mazdoor 2 x 0.5 Day 1.00
10 For loading cement to BP bin
mazdoor Day 5.00
11 For miscellaneous works of BP
mazdoor Day 2.00
12 For Erection/Dismantling bulk head sqm 6.00
13 For Laying concrete by placer
Masom Cl I Day 3.00
mazdoor Day 9.00
work inspector Day 3.00
14 For wetting C.A / Curing etc
mazdoor Day 3.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
above 0% Rs: 0.00
IRR-TAW-6 DRILLING & GROUTING WORKS :
IRR-TAW-6-1 Drilling 32 mm diameter grout holes in concrete / rock by percussion drilling using jack
hammer or stooper drills as directed to specified depth for consolidation / contact grouting
including cost of all materials, machinery, labour, cleaning holes, ventilation, lighting, drainage
and all other ancillary operations etc., complete.
DATA:
RATE ANALYSIS UNIT : 100.00 Rm
A. MATERIALS:
in Rs. in Rs.
4 Sundries LS 3.00
B. MACHINERY:
71
IRR-TAW

in Rs. in Rs.
6 Sundries LS 5.00
C. LABOUR:
in Rs. in Rs.
1 Crew charges for Air compressor Hour 8.00
2 Crew charges for Pump Hour 4.00
3 Crew charges for Jack Hammer Hour 32.00
4 Crew charges for Drilling Jumbo Hour 8.00
5 mazdoor Day 2.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
above 0% Rs: 0.00
Rate per/ Rmt.= (A+B+C+D) /100 Rm Rs: 0.00
IRR-TAW-6-2 Grouting cement slurry in grout holes under specified pressure for consolidation / contact
grouting including cost of all materials, machinery, labour, redrilling wherever necessary,
ventilation,lighting, drainage and other ancillary operations etc., complete with lead upto 1 km
and all lifts.
DATA: In contact zones, perticularly in crown portion, the grout intake will be heavy due to inadequate
packing of concrete during placement of concrete by placer pump.
The average grout intake in the contact zone is considered at 75 kg per metre. Beyond contact
zone the grout intake may vary from 25 kg per metre to 50 kg per metre depending on the
extent of opening of joints in rock during / after excavation.
The average grout intake for consilidation /contact grouting is considered at 50 kg per metre.
The average progress of grouting per shift is considered at 1500 kg.

A. MATERIALS:
in Rs. in Rs.
1 Cement tonne 1.50
2 Use rate of grouting hose 50 m Hour 8.00
4 Sundries LS 2.00
B. MACHINERY:
in Rs. in Rs.
1 Grouting machine Hour 8.00
72
IRR-TAW

4 Sundries LS 2.00
C. LABOUR:
in Rs. in Rs.
4 mazdoor Day 2.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
above 0% Rs: 0.00
Total cost for tonne Rs: 0.00
Rate per/ Mtonne..= (A+B+C+D) /1.50 tonne Rs: 0.00
IRR-TAW-6-3 Drilling 75 mm diameter drainage holes vertical or inclined in rock / concrete in tunnel by
percussion drilling using waggon drill or other suitable drilling equipment including cost of all
materials, machinery, labour, ventilation, lighting, drainage etc., complete.
DATA: Generally rate of drilling in rock or concrete inside tunnel will be less compared to drilling in
open area.
A. MATERIALS:
in Rs. in Rs.
1 Use rate of cross bit 75 mm dia Rm 120.00
2 Use rate of air hose 20 m Hour 16.00
4 Use rate of extension rods Rm 120.00
B. MACHINERY:
in Rs. in Rs.
4 Sundries LS 2.00
C. LABOUR:
in Rs. in Rs.
4 mazdoor Day 2.00
73
IRR-TAW

ABSTRACT:
Total Rs: 0.00
D.Add for contractor's profit and Total Rs: 0.00
above 0% Rs: 0.00
Rate per/ R.Mt.= (A+B+C+D) /120.00 Rm Rs: 0.00
74
IRR-CAW
Chapter III
Standard data
Index- code
IRR-CAW CANAL AND ALLIED WORKS
IRR-CAW-1 EXCAVATION WORKS :
IRR-CAW-1-1 Excavation in all kinds of soil including boulders upto 0.3 m diameter for canal, seating of
embankment, filter drains / catch water drains etc., including dressing bed and sides to
required level and profile, cost of all materials, machinery, labour, placing the excavated soil
neatly in dump area or for the formation of service road / embankment as directed etc.,
DATA:
A. MATERIALS:
Sl No particulars Unit Quantity Rate Amount
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
2 Tippers 5 cum capacity 6 Nos Hour 48.00
C. LABOUR:
in Rs. in Rs.
4 mazdoor Day 30.00
ABSTRACT:
Total Rs: 0.00
overheads on A+B+C Rs: 0
Rs: 0.00
Rate per cum=(A+B+C+D) /925 Rs: 0.00
IRR-CAW-1-2 Excavation in all kinds of soil including boulders upto 0.30 m dia for field channels, seating
of embankment for field channels etc., including dressing of bed and sides to required profile,
cost of all materials, machinery, labour, placing the excavated stuff for formation of service
road / embankment as directed etc., complete with lead upto 10 m and lift upto 3 m.
DATA: Average output of 2 mazdoors assumed at 5 cum / day for trimming

A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
74
IRR-CAW
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 17.00
ABSTRACT:
Total Rs: 0.00
overheads on A+B+C 0% Rs: 0
Total cost for 440.00 cum Rs: 0.00
IRR-CAW-1-3 Excavation in ordinary rock without blasting including boulders above 0.30 m upto 0.6 m
dia. for canals, seating of embankment, filter drain / catch water drains etc., including dressing of
bed and sides to required level and profile, cost of all materials, machinery, labour, placing the
excavated soft rock neatly in dump area or for formation of service road as directed etc.,
complete with lead upto 1 km and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
2 Tippers 5 cum capacity 5 Nos Hour 40.00
C. LABOUR:
in Rs. in Rs.
5 mazdoor Day 22.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-1-4 Excavation in ordinary rock without blasting including boulders above 0.3 m upto 0.60 m
dia. for field channels, seating of embankment for field channels etc., including dressing of bed and
sides to required profile, cost of all materials, machinery, labour, placing the excavated stuff
for formation of service road as directed etc.,complete with lead upto 10 m and lift upto 3 m.
DATA:
75
IRR-CAW
A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
4 mazdoor Day 11.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-1-5 Excavation in hard rock requiring blasting including boulders above 0.6 m upto 1.2 m dia. for
canals, seating of embankment, filter drain / catch water drains etc., including dressing bed
and sides to required level and profile, cost of all materials, machinery, labour, placing the
excavated rock in dump area or for formation of service road as directed etc., complete with
DATA:
A. MATERIALS:
in Rs. in Rs.
2 Use rate of 50 m air hose 2 Nos Hour 24.00
3 Explosive small dia ( Kelvex-220 kg 161.00
7 Sundries LS 5.00
B. MACHINERY:
in Rs. in Rs.
2 Tippers 5 cum capacity 5 Nos. Hour 40.00
3 Air compressor 8.5 cmm ( diesel Hour 12.00
C. LABOUR:
in Rs. in Rs.
76
IRR-CAW
6 Blaster Day 1.00

10 mazdoor Day 32.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-1-6 Excavation in hard rock of all toughness by blasting including boulders above 1.2 m dia. for
(a) canals, seating of embankment, filter drain / catch water drains etc., including levelling the bed
by removing all projections by hammering / chiselling, cost of all materials, machinery, labour,
placing the excavated rock neatly in approved dump area and levelling the same as directed
Note: i ) The rate under this item shall be adopted for canals designed for carrying capacity of less
than 15 cumecs or where the average depth of excavation in hard rock is less than 3 m.
ii ) The rate includes levelling canal bed by hammering / chiselling all rock projections wherever
required.
DATA: Assume 10.40 m width of canal at the bench level and 1.25 m average depth of cutting.
Assume side slopes of 0.5 horizontal to 1 vertical.
Consider average 1.0 m wide excavation on either side under line drilling and smooth blasting to obtain neat excavated
slopes.
Rate analysis prepared separately for smooth blasting quantity.
77
IRR-CAW

A. MATERIALS:
in Rs. in Rs.
3 Explosive small dia. (Kelvex-220 kg 21.20
7 Sundries LS 2.00
B. MACHINERY:
in Rs. in Rs.
Fuel / energy charges Hour 1.10
C. LABOUR:
in Rs. in Rs.
7 Blaster Day 1.00
11 mazdoor Day 2.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-1-7 Excavation in hard rock of all toughness including boulders above 1.2 m dia. by approved
(b) controlled blasting methods for canals, cut-off trench of embankment, filter / catch-water
drains etc., including controlling fly-rock by muffling arrangements such as placing
50 x 50 mm opening chain link mesh or waste tyres and sand bags, monitoring ground
vibrations at specified locations, costof all materials, machinery, labour, placing excavated rock
neatly in approved dump area or other place as directed etc., complete with lead upto 1 km
and all lifts.
Note: i ) The rate under this item shall be adopted for canals designed for carrying capacity of less
ii ) The rate under this item shall be adopted where the control of fly-rock and ground vibrations
is required.
DATA: Work requires:

- use of delay detonators to reduce ground vibrations.
- monitoring and recording ground vibrations..
- conducting trial studies for drilling and blasting method to be adopted to avoid damages to
near-by structures.
78
IRR-CAW
- covering blasting area with chain link mesh or waste conveyor belts or waste tyres and sand
bags to prevent flying of rock fragments during blasting.
Assume 10.40 m width of canal at the bench level and 1.25 m average depth of cutting.
Consider average 1.0 m wide excavation on either side under line drilling and smooth blasting to
obtain neat excavated slopes.
Rate analysis prepared separately for smooth blasting quantity.

A. MATERIALS:
in Rs. in Rs.
3 Use rate of wire mesh sqm 94.00
9 Sundries LS 2.00
Seignorage charges for Sand(included in the material cost) 0.00
B. MACHINERY:
in Rs. in Rs.
79
IRR-CAW

C. LABOUR:
in Rs. in Rs.
2 Crew for Angle dozer Hour 0.25
7 Blaster Day 0.50
9 Stone chiseller Cl - II Day 0.50
11 mazdoor Day 3.00
ABSTRACT:
A. Cost of Materials including seignorage charges Rs: 0.00
Total Rs: 0.00
Add for blasting studies & monitoring vibration 0.00% Rs: 0.00
Total Rs: 0.00
overheads on
A+B+C+percentage above 0% Rs: 0
IRR-CAW-1-8 Excavation in hard rock of all toughness including boulders above 1.2 m dia. for dressing
( c) canal sides neatly on either side to required profile by line drilling and smooth blasting
including removing under-cuts by chiselling / hammering, placing the excavated rock neatly in
dump area or other place as directed, cost of all materials, machinery, labour etc., complete
Note: i) For excavation of canal below free board level combination of normal / controlled blasting and
line drilling and smooth blasting shall be adopted to obtain neat side slopes. For the purpose
of payment 1 m width of excavation on either side shall be treated as excavation by line drilling
and smooth blasting and remaining portion shall be treated as excavation by normal / controlled
blasting as the case may be.
ii ) The rate under this item shall be adopted for canals designed for carrying capacity of less
iii ) The rate includes controlling fly-rock wherever required.
iv ) The rate under this item shall be paid only on ascertaining that the excavated face has
come off neatly as per specifications or atleast 50 percent of smooth blast holes are visible for
inspection and are spaced at specified interval.
v ) In case, where the above criteria is not fulfilled payment shall be restricted to rate provided
for excavation by normal blasting or controlled blasting as the case may be.
DATA: Work requires:

- drilling holes at closer interval along the final excavation lines on either side of canal with light
blasting to achieve neat side slopes.
80
IRR-CAW

A. MATERIALS:
in Rs. in Rs.
6 Sundries LS 1.00
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
6 Blaster Day 0.50
10 mazdoor Day 1.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
overheads on
Rate per cum=(A+B+C+D) /17.50 Rs: 0.00
IRR-CAW-1-9 Excavation in hard rock by blasting including boulders above 1.2 m dia. for canals, seating
(a) embankment etc., including levelling bed by removing all projections by hammering / chiselling,
cost of all materials, machinery, labour, placing the excavated rock neatly in approved dump
area and levelling the same as directed etc.,complete with initial lead upto 1 km and all lifts.
Note: i ) The rate under this item shall be adopted for canals designed for carrying capacity of more
than 15 cumecs or where the average depth of excavation in hard rock is more than 3 m.
ii ) The rate includes levelling canal bed by hammering / chiselling all rock projections wherever
required.
DATA
81
IRR-CAW
The rate analysis is for excavation excluding smooth blasting area.

A. MATERIALS:
in Rs. in Rs.
1 Use rate of T.C bit 100 mm dia Rm 104.00
2 Use rate of Extension rod with c Rm 104.00
3 Use rate of Jack hammer drill ro Rm 12.00
reconditioning charges @ 10%
4 Use rate of 50 m air hose for wag Hour 10.50
Use rate of 25 m air hose for JH Hour 1.00
5 High strength ANFO booster kg 38.00
6 ANFO kg 155.00
7 Diesel oil ltr 35.00
10 D-cord Rm 145.00
12 Sundries LS 5.00
B. MACHINERY:
in Rs. in Rs.
1 Tippers 5 cum capacity Hour 24.84
3 Angle dozer Hour 2.00
82
IRR-CAW

C. LABOUR:
in Rs. in Rs.
8 Blaster Day 1.00
12 mazdoor Day 3.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-1-10 Excavation in hard rock of all toughness including boulders above 1.2 m dia. by approved
(b) controlled blasting methods for canals, cut-off trench of embankment etc., including
controlling fly-rock by muffling arrangements such as placing 50 x 50 mm opening
chain link mesh or waste tyres and sand bags, monitoring ground vibrations at specified
locations, cost of all materials, machinery, labour, placing excavated rock neatly in approved
dump area or other place as directed etc., complete with lead upto 1 km and all lifts.
Note: i ) The rate under this item shall be adopted for canals designed for carrying capacity of more
ii ) The rate under this item shall be adopted where the control of fly-rock and ground vibrations
is required.
DATA Work requires:
- covering blasting area with chain link mesh or conveyor belts or waste tyres and sand bags
to prevent flying of rock fragments during blasting.
- use of shock tube detonators / trunk line delays to reduce ground vibrations.
- monitoring and recording ground vibrations.
- conducting trial studies for drilling and blasting method to be adopted to avoid damages to
near-by structures.
83
IRR-CAW
The rate analysis is for excavation excluding smooth blasting area.

A. MATERIALS:
in Rs. in Rs.
1 Use rate of T.C bit 100 mm dia Rm 104.00
2 Use rate of Extension rod with c Rm 104.00
3 Use rate of Jack hammer drill ro Rm 12.00
reconditioning charges @ 10%
4 Use rate of 50 m air hose 50 mm Hour 10.50
Use rate of 25 mm air hose 2 No Hour 2.00
5 High strength ANFO booster kg 38.00
6 ANFO kg 155.00
7 Diesel oil ltr 35.00
10 Shock tube detonators Rm 120.00
11 Noiseless trunk line delays Nos 12.00
13 Use rate of chain link wire mesh sqm 132.00
15 Sundries LS 20.00
B. MACHINERY:
in Rs. in Rs.
1 Tippers 5 cum capacity Hour 30.00
C. LABOUR:
in Rs. in Rs.
84
IRR-CAW

8 Blaster Day 0.50
12 mazdoor Day 5.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
overheads on
IRR-CAW-1-11 Excavation in hard rock of all toughness including boulders above 1.2 m dia. for dressing
( c) canal sides neatly on either side to required profile by line drilling and smooth blasting
including removing under-cuts by chiselling / hammering, placing the excavated rock neatly in
dump area or other place as directed, cost of all materials, machinery, labour etc., complete
Note: i ) For excavation of canal below free board level combination of normal / controlled blasting and
line drilling and smooth blasting shall be adopted to obtain neat side slopes. For the purpose
of payment 1 m width of excavation on either side shall be treated as excavation by line drilling
and smooth blasting and remaining portion shall be treated as excavation by normal / controlled
blasting as the case may be.
ii ) The rate under this item shall be adopted for canals designed for carrying capacity of more
iii ) The rate includes controlling fly-rock wherever required.
iv ) The rate under this item shall be paid only on ascertaining that the excavated face has
come off neatly as per specifications or atleast 50 percent of smooth blast holes are visible for
inspection and are spaced at specified interval.
v ) In case, where the above criteria is not fulfilled payment shall be restricted to rate provided
for excavation by normal blasting or controlled blasting as the case may be.
DATA Work requires:

- drilling holes at closer interval near final excavation lines on either side of canal and light
blasting to achieve fairly neat side slopes.

A. MATERIALS:
in Rs. in Rs.
1 Use rate of T.C bit 100 mm dia Rm 121.00 0.00 0.00
2 Use rate of Extension rod with c Rm 121.00 0.00 0.00
3 Use rate of Jack hammer drill ro Rm 3.00 0.00 0.00
reconditioning charges @ 10% 0.00
4 Use rate of 50 m air hose 50 mm Hour 12.00 0.00 0.00
Use rate of 25 mm air hose 2 No Hour 0.50 0.00 0.00
5 High strength ANFO booster kg 5.00 0.00 0.00
6 ANFO kg 19.00 0.00 0.00
85
IRR-CAW
7 Diesel oil ltr 4.50 0.00 0.00

8 Explosive small dia ( Kelvex-220 kg 1.00 0.00 0.00
9 Ordinary detonators Nos 5.00 0.00 0.00
10 Detonating shock tube Rm 70.00 0.00 0.00
11 Noiseless trunk line delays Nos 4.00 0.00 0.00
12 Fuse coil Rm 10.00 0.00 0.00
13 Sundries LS 2.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
1 Tippers 5 cum capacity Hour 6.24 0.00 0.00
3 Angle dozer Hour 0.50 0.00 0.00
4 Air compressor 8.5 cmm ( diesel Hour 13.45 0.00 0.00
5 Waggon drill Hour 13.20 0.00 0.00
6 Jack hammer Hour 0.50 0.00 0.00
C. LABOUR:
in Rs. in Rs.
5 Crew for Waggon drill Hour 13.45 0.00 0.00
8 Blaster Day 0.50 0.00 0.00
11 Stone chiseller Cl- II Day 1.00 0.00 0.00
12 mazdoor Day 2.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
Add for blasting studies & monitoring vibratio 0.00% Rs: 0.00
Total Rs: 0.00
overheads on
IRR-CAW-2 EMBANKMENT WORKS USING BORROW AREA SOIL :
IRR-CAW-2-1 Providing impervious hearting embankment with selected soil from approved borrow areas in
layers of 25 cm before compaction including cost of all materials, machinery, labour,
all operations such as excavation, sorting out, transporting, spreading in layer of specified
thickness, breaking clods, sectioning, watering, compacting each layer to density control of
not less than 98 percent or as stipulated by sheep / pad foot roller etc., complete with initial
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Nill 0.00
0.00
Seioniorage charges for soil Rs. 0.00
86
IRR-CAW
B. MACHINERY:
in Rs. in Rs.
3 Tippers 5.00 cum capacity 4 Nos Hour 32.00
4 Pump 5 hp ( diesel ) Hour 2.00
7 Sundries LS 5.00
C. LABOUR:
in Rs. in Rs.
8 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-2-2 Providing impervious hearting embankment with selected soil from approved borrow areas in
layers of 25 cm before compaction including cost of all materials, machinery, labour,
all operations such as excavation, sorting out, transporting, spreading in layer of specified
not less than 95 percent or as stipulated by sheep / pad foot roller etc., complete with initial
DATA:

A. MATERIALS:
in Rs. in Rs.
1 Nill 0.00
0.00
seigniorage charges for soil 0.00
B. MACHINERY:
in Rs. in Rs.
3 Tippers 5 cum Hour 32.00
87
IRR-CAW
7 Sundries LS 5.00
C. LABOUR:
in Rs. in Rs.
8 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-2-3 Providing semi-pervious / pervious casing embankment using soil from approved borrow area
in layers of 25 cm before compaction including cost of all materials, machinery, labour,
all operations such as excavation, sortingout, transporting, spreading in layer of specified
thickness, breaking clods, sectioning, watering, compacting to density control of not less
than 98 percent or as stipulated by sheep's / pad foot roller etc., complete with initial
DATA:

A. MATERIALS:
in Rs. in Rs.
1 Nill 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
7 Sundries LS 2.00
C. LABOUR:
in Rs. in Rs.
8 mazdoor Day 4.00
88
IRR-CAW
ABSTRACT:
Total Rs: 0.00
in layers of 25cm before compaction including cost of all materials, machinery, labour,
thickness, breaking clods, sectioning, watering, compacting to density control of not less
than 95 percent or as stipulated by sheep's / pad foot roller etc., complete with initial
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Nill 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
7 Sundries LS 5.00
C. LABOUR:
in Rs. in Rs.
8 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
in layers of 25cm before compaction including cost of all materials, machinery, labour,
thickness, breaking clods, sectioning, compacting each layer without watering to density
control of not less than 95 percent or as stipulated by sheep's foot / pad foot roller etc.,
89
IRR-CAW
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Nill 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
5 Sundries LS 2.00
C. LABOUR:
in Rs. in Rs.
6 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-2-6 Providing hearting / casing embankment with homogeneous soil from approved borrow
areas in layers of 25 cm before compaction including cost of all materials, machinery,
labour, all operations such as excavation, sorting out, transporting, spreading in layer of
specified thickness, breaking clods, sectioning, watering, compacting each layer to density
control of not less than 98 percent or as stipulated by sheep / pad foot roller etc., complete
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Nill 0.00
0.00
seigniorage charges for soil
B. MACHINERY:
in Rs. in Rs.
90
IRR-CAW

7 Sundries LS 2.00
C. LABOUR:
in Rs. in Rs.
8 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-2-7 Providing hearting / casing embankment with homogeneous soil from approved borrow
areas in layers of 25 cm before compaction including cost of all materials, machinery,
labour, all operations such as excavation, sorting out, transporting, spreading in layer of
specified thickness, breaking clods, sectioning, watering, compacting each layer to density
control of not less than 95 percent or as stipulated by sheep / pad foot roller etc., complete
DATA: : 677.28

A. MATERIALS:
in Rs. in Rs.
1 Nill 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
3 Tippers 5 cum 3 Nos Hour 48.00
7 Sundries LS 5.00
C. LABOUR:
in Rs. in Rs.
91
IRR-CAW

8 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-3 EMBANKMENT WORKS USING DUMP AREA SOIL :
IRR-CAW-3-1 Providing casing embankment using homogeneous soil from approved borrow area
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Nill 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
5 Sundries LS 2.00
C. LABOUR:
in Rs. in Rs.
6 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-3-2 Providing impervious hearting embankment with soil from approved dump areas in layers
of 25 cm before compaction including cost of all materials, machinery, labour, all
operations such as re-excavation, sorting out, transporting, spreading in layer of specified
thickness, breaking clods, sectioning, watering, compacting each layer to achieve density
control of not less than 98 percent or as stipulated by sheep's / pad foot roller etc.,complete
92
IRR-CAW
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Nill 0.00 0.00 0.00
0.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
1 Angle dozer Hour 4.04 0.00 0.00
3 Tippers 5.00 cum capacity 6 Nos Hour 48.00 0.00 0.00
4 Pump 5 hp ( diesel ) Hour 3.00 0.00 0.00
7 Sundries LS 2.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
8 mazdoor Day 6.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00

IRR-CAW-3-3 Providing impervious hearting embankment with soil from approved dump areas in layers
of 25 cm before compaction including cost of all materials, machinery, labour, all
operations such as re-excavation, sorting out, transporting, spreading in layer of specified
thickness, breaking clods, sectioning, watering, compacting each layer to achieve density
control of not less than 95 percent or as stipulated by sheep's / pad foot roller etc.,complete
DATA:

A. MATERIALS:
in Rs. in Rs.
1 Nill 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
93
IRR-CAW

7 Sundries LS 5.00
C. LABOUR:
in Rs. in Rs.
8 mazdoor Day 6.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-3-4 Providing semi-pervious / pervious casing embankment using soil from approved dump area
all operations such as re-excavation, sorting out, transporting, spreading in layer of specified
not less than 98 percent or as stipulated by sheep's foot / pad foot roller etc., complete with
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Nill 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
7 Sundries LS 2.00
C. LABOUR:
94
IRR-CAW

in Rs. in Rs.
8 mazdoor Day 6.00
ABSTRACT:
Total Rs: 0.00
not less than 95 percent or as stipulated by sheep's foot / pad foot roller etc., complete with
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Nill 0.00
0.00
seigniorage charges for soil Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
3 Tippers 5 cum of 6 Nos Hour 48.00
7 Sundries LS 5.00
C. LABOUR:
in Rs. in Rs.
8 mazdoor Day 6.00
ABSTRACT:
Total Rs: 0.00
95
IRR-CAW

IRR-CAW-4 EMBANKMENT WORKS USING EXCAVATED SOIL :
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Nill 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
5 Sundries LS 2.00
C. LABOUR:
in Rs. in Rs.
6 mazdoor Day 6.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-4-2 Providing impervious hearting embankment with soil collected in embankment area in
heaps as part of disposal of excavated soil from canal including cost of all materials,machinery,
labour, all operations such as sortingout, spreading in layer of 25 cm before compaction,
breaking clods,sectioning, watering and compacting each layer to density control of not less
than 98 percent or as stipulated by sheep's foot / pad foot roller etc., complete with lead upto
1 km for water.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Nill 0.00
0.00
96
IRR-CAW
B. MACHINERY:
in Rs. in Rs.
5 Sundries LS 2.00
C. LABOUR:
in Rs. in Rs.
6 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-4-3 Providing impervious hearting embankment with soil collected in embankment area in
heaps as part of disposal of excavated soil from canal including cost of all materials,machinery,
labour, all operations such as sortingout, spreading in layer of 25 cm before compaction,
breaking clods,sectioning, watering and compacting each layer to density control of not less
than 95 percent or as stipulated by sheep's foot/ pad foot roller etc., complete with lead upto
1 km for water.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Nill 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
5 Sundries LS 5.00
C. LABOUR:
in Rs. in Rs.
97
IRR-CAW

6 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-4-4 Providing semi-pervious / pervious casing hearting embankment using soil collected in
heaps in embankment area as part of disposal of excavated soil from canal including cost of
all materials, machinery, labour, all operations such as sorting-out, spreading in layers of 25
cm before compaction, breaking clods, sectioning, watering and compacting each layer
to density control of not less than 98 percent or as stipulated by sheep's foot / pad foot
roller etc., complete with lead upto 1 km for water.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Nill 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
5 Sundries LS 2.00
C. LABOUR:
in Rs. in Rs.
6 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-4-5 Providing semi-pervious / pervious casing embankment using soil collected in heaps in
embankment area as part of disposal of excavated soil from canal including cost of all
materials, machinery, labour, all operations such as sorting-out, spreading in layers of 25
cm before compaction, breaking clods, sectioning, watering and compacting each layer
to density control of not less than 95 percent or as stipulated by sheep's foot / pad foot
roller etc., complete with lead upto 1 km for water.
DATA:
98
IRR-CAW

A. MATERIALS:
in Rs. in Rs.
1 Nill 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
5 Sundries LS 5.00
C. LABOUR:
in Rs. in Rs.
6 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-4-6 Providing semi-pervious / pervious casing embankment using soil collected in heaps in
embankment area as part of disposal of excavated soil from canal including cost of all
materials, machinery, labour, all operations such as sorting-out, spreading in layers of 25
cm before compaction, breaking clods, sectioning and compacting each layer without
watering to density control of not less than 95 percent or as stipulated by sheep's foot /
pad foot roller etc., complete.
DATA:

A. MATERIALS:
in Rs. in Rs.
1 Nill 0.00
Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
3 Sundries LS 2.00
C. LABOUR:
99
IRR-CAW

in Rs. in Rs.
4 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
D.D.Add for contractor's profit
and overheads on A+B+C on
A+B+C 0% Rs: 0
IRR-CAW-5 FOUNDATION FILLING WORKS :
IRR-CAW-5-1 Providing compacted embankment for field irrigation channels with gravely soil from
approved borrow area including sorting out, spreading in layers of 15 cm thickness, breaking
clods, watering, compacting, dressing sides to required slopes etc.,complete with lead upto
50 m and all lifts.
DATA: Output of 1 Crowbarman assumed at 10 cum per day for loosening gravely soil.
Output of 2 mazdoors assumed at 5 cum per day for excavation of gravely soil
and loading the same to transport vehicle at borrow area.
Output of 1 mazdoor assumed at 10 cum loose soil for spreading and levelling.
A. MATERIALS:
in Rs. in Rs.
1 Nill 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 5 hp pump ( diesel ) Hour 1.00
C. LABOUR:
in Rs. in Rs.
3 Crowbarman for loosening soil Day 2.50
4 mazdoor
For excavation at borrow area Day 5.00
For spreading / levelling / sectio Day 2.50
for loading soil Day 5.00
5 Cartman with Bullock cart for wat Day 1.00
6 Bullock drawn roller for rolling Day 1.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-5-2 Providing rubble and sand filling in layers of 22.5 to 30 cm including cost of all materials,
machinery, labour, watering, ramming etc., complete with initial lead upto 50 m and all lifts.
DATA: Consider 10 cum rubble and sand filling.

Quantity of rubble 10.00 cum
100
IRR-CAW
Quantity of sand 4.00 cum

4 mazdoors for rubble filling & for packing with sand & watering.

A. MATERIALS:
in Rs. in Rs.
1 Rubble stones at quarry cum 10.00
2 Sand ( unscreened ) at quarry cum 4.00
Seionorage charges for sand (included in the material rate Rs: 0.00
Seionorage charges for stone (included in the material rate Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
0.00
C. LABOUR:
in Rs. in Rs.
1 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-5-3 Providing rubble and Murum filling in layers of 22.5 to 30 cm including cost of all materials,
machinery, labour, watering, ramming etc., complete with initial lead upto 50 m and all lifts.
DATA: Consider 10 cum rubble and murum filling.

Quantity of rubble 10.00 cum
Quantity of murum 4.00 cum
4 mazdoors for rubble filling & packing with murum

A. MATERIALS:
in Rs. in Rs.
1 Rubble stones at quarry cum 10.00
2 Murum cum 4.00
Seionorage charges for Murum(included in the material rat Rs: 0.00
Seionorage charges for stone(included in the material rate Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
0.00
C. LABOUR:
in Rs. in Rs.
1 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
101
IRR-CAW
IRR-CAW-5-4 Providing and laying 25 cm thick sand blanket below embankment including cost of all
materials, machinery, labour, spreading to specified thickness etc., complete with initial lead
upto 50 m and all lifts.
DATA: Consider 100 sqm sand blanket laying.

Quantity of sand ( unscreened ) 25.00 cum
Requirement of labour for spreading collected sand.
2 mazdoors @ 10 cum / day.
RATE ANALYSIS UNIT : 100.00 sqm

A. MATERIALS:
in Rs. in Rs.
0.00
Seionorage charges for sand (included in the material rate Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
0.00
C. LABOUR:
in Rs. in Rs.
1 mazdoor Day 5.00
ABSTRACT:
Total Rs: 0.00
Total cost for 100.00 sqm Rs: 0.00
Rate per sqm=(A+B+C+D) /100 Rs: 0.00
IRR-CAW-5-5 Providing and constructing dry rubble rock-toe using rubble and stone chips from
approved source including cost of all materials, machinery, labour, hand packing rubble
and stone chips, finishing top and sides to required slopes etc., complete with initial lead upto
50 m and all lifts.
DATA: Top width : NIL

Side slope upstream side : 1 (V) : 1 (H)
Side slope down stream side : 1 (V) : 1.5 (H)
Height : 1.00 m
Cross sectional area ( 0.00 + 2.50 ) x 1 / 2 : 1.25 sqm
Consider 100 cum rock toe:
A. MATERIALS:
in Rs. in Rs.
1 Rubble cum 100.00
3 Sundries LS 2.00
Seionorage charges for stone chips (included in the material rates) 0.00
Seionorage charges for stone(included in the material rates) 0.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
0.00
C. LABOUR:
102
IRR-CAW

in Rs. in Rs.
3 mazdoor Day 19.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-5-6 Providing and constructing longitudinal and cross graded filter drains using sand and
20 mm down graded aggregates satisfying specified filter creteria in layers as per specifications
including cost of all materials, machinery, labour, laying to required slopes, compaction etc.,
complete with initial lead upto 50 m and all lifts.
DATA: Bottom width 0.50 m

Side slopes : 1( V ):1(H)
Depth 0.50 m
Top width 1.50 m
A. MATERIALS:
in Rs. in Rs.
2 Coarse aggregate 20-10 mm 75 cum 17.40
Add for seignorage charges for sand(included in the materi Rs: 0.00
Add for seignorage charges for CA(included in the material Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 36.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-5-7 Laying Longitudinal Drains and Transverse drains of Size 600 x600 x750 mm in Bed and
filling with 12 mm to 40 mm HG machine Crushed metal and sand in bed including
Excavation of drains and Cost of procuring of all materials including 50 m lead and for all lifts.
DATA:
A. MATERIALS: Unit: 100 sqm
Sl.No Particulars Unit Qty Rate in Rs Amount in Rs.
1 12 mm to 40 mm metal Cum 13.5
2 Sand cum 36
Add seignorage charges on CA (included in material rate) 0
Add seignorage charges on FA (included in material rate) 0
Total cost of Materials Rs. 0
103
IRR-CAW
B. MACHINERY
Sl.No Description Unit Quantity Rate in Rs. Amount in Rs.
1 Excavation of drain with ExcavatCum 45
Total hire charges of Machinery Total Rs. 0
C. LABOUR
Sl.No Particulars Unit Qty Rate in Rs Amount in Rs.
1 Labour for Sand laying Cum 31.5
2 Labour for Metal laying Cum 36
ABSTRACT
A. Cost of Materials including seignorage charges Rs. 0
B. Hire charges of Machinery Rs. 0
C. Cost of Labour Rs. 0
Total Rs: 0.00
Rate per sqm=(A+B+C+D) /100 0
IRR-CAW-5-8 Laying and fixing of 100 mm Dia 300 mm long precast porus CC plugs in bed and sides
using 1.181 Kgs of cement per each using 20 mm HG metal and placing in local filters of size
600x600x750 mm in size including Excavation of drains and Cost of procuring of all materials
including 50 m lead and for all lifts.
DATA:
Rate Analysis Unit 1 Plug
A. MATERIALS:
Amount in
Sl.No Particulars Unit Qty Rate in Rs Rs.
1 Coarse aggregate Cum 0.08
2 Sand cum 0.203
3 Cement Kg 1.181
Add seignorage charges on CA (included in material rate) 0.00
Add seignorage charges on FA (included in material rate) 0.00
B. MACHINERY
Amount in
Sl.No Description Unit Quantity Rate in Rs.
Rs.
1 Excavation of drain with ExcavatCum 0.27
2 Machine mixing Charges Cum 0.003
Total hire charges of Machinery Total Rs. 0.00
C. LABOUR
Amount in
1 Man Mazdoor Day 30.00
ABSTRACT
A. Cost of Materials including seignorage charges Rs. 0.00
B. Hire charges of Machinery Rs. 0.00
C. Cost of Labour Rs. 0.00
Total Rs: 0.00
Total for one plug Rs. 0.00
Rate per one plug=(A+B+C+D) /1 0.00
IRR-CAW-5-9 Providing and constructing 0.50 m thick vertical or inclined graded filter media consisting of
15 cm thick sand layers and 20 cm thick 20 mm down coarse aggregate layer using approved
materials satisfying specified filter creteria as per specifications including cost of all materials,
machinery, labour, laying to required slope, compaction etc., complete with initial lead upto
50 m and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
2 Coarse aggregate 20-10 mm 75 cum 30.00
104
IRR-CAW

B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 36.00
ABSTRACT:
Total Rs: 0.00
Total cost for 100.00 cum Rs. 0.00
IRR-CAW-5-10 Providing and constructing graded filter media below and behind rock-toe consisting of
20 cm thick sand, 15 cm thick 20 mm down and 15 cm thick 40 mm down size graded coarse
aggregates satisfying filter creteria behind rock-toe and 15 cm thick sand, 20 cm thick 20 mm
down coarse aggregate and 65 cm thick 40 mm down size coarse aggregate satisfying filter
creiteria below rock-toe as per specifications including cost of all materials, machinery, labour,
laying to required slope, compaction etc., complete with initial lead upto 50 m and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoors Day 60.00
ABSTRACT:
Total Rs: 0.00
105
IRR-CAW
IRR-CAW-5-11 Providing and laying filter media consisting of 2 layers of poly-propeline nonwoven filter
(a) fabric and 200 mm thick 20 mm down graded coarse aggregate for embankment including
cost of all materials, machinery, labour, forming toe drain etc., complete with lead upto 50 m
a. for aggregate and all leads for fabric and all lifts.
Using 200 gsm filter fabric.
DATA:
Requirement of labour for laying aggregate and filter fabric:

2 mazdoors @ 6 cum / day.

A. MATERIALS:
in Rs. in Rs.
1 PP filter fabric 200 gsm sqm 210.00
2 20 - 10 mm CA @ 75 % cum 15.00
10 mm down CA @ 25 % cum 5.00
Total Cost of materials Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 7.00
ABSTRACT:
Total Rs: 0.00
Total cost for 100.00 sqm Rs. 0.00
IRR-CAW-5-12 Providing and laying filter media consisting of 2 layers of poly-propeline nonwoven filter
(b) fabric and 200 mm thick 20 mm down graded coarse aggregate for embankment including
cost of all materials, machinery, labour, forming toe drain etc., complete with lead upto 50 m
for aggregate and all leads for fabric and all lifts.
b. Using 250 gsm filter fabric.
DATA: Consider 100 sqm filter media laying.

A. MATERIALS:
in Rs. in Rs.
1 PP filter fabric 250 gsm sqm 210.00
2 20 - 10 mm CA @ 75 % cum 15.00
10 mm down CA @ 25 % cum 5.00
B. MACHINERY:
106
IRR-CAW

in Rs. in Rs.
1 Nil 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 7.00
ABSTRACT:
Total Rs: 0.00
Total cost for 100.00 sqm Rs. 0.00
IRR-CAW-6 ROCK FILL WORKS :

IRR-CAW-6-1 Providing and constructing rockfill casing to canal embankment with graded stones and
spalls from approved quarry including cost of all materials, machinery, labour, spreading
stones and spalls in layers, hand packing, wedging, finishing surface to required slopes etc.,
DATA: Consider 100 cum rockfill casing to canal embankment.

A. MATERIALS:
in Rs. in Rs.
1 Rubble stones ( at quarry ) cum 100.00
2 Stone chips / spalls ( at quarry ) 15.00
Add for seignorage charges for rubble/spalls(included in th Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 8.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-6-2 Providing and constructing rockfill casing to canal embankment with graded stones and
spalls available in dump yard including cost of all materials, machinery, labour, spreading
stones and spalls in layers, hand packing, wedging, finishing surface to required slopes etc.,
Note: Stones and spalls available in dump yard shall be issued at specified issue rate.
DATA:
A. MATERIALS:
107
IRR-CAW
in Rs. in Rs.
1 Rubble stones at dump yard cum 100.00
2 Stone chips ( spalls ) at dump yard 15.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 10.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-7 CANAL LINING WORKS :
IRR-CAW-7-1 Providing cohesive non-swelling ( CNS ) soil lining to canals using soil from approved borrow
area including spreading soil in layers of thickness not more than 15 cm, breaking clods,
watering, compacting to density control of not less than 98 percent or as stipulated,
dressing to required profile etc., complete with initial lead upto 1 km and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Nil 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
6 Diesel road roller 8-10 tonne Hour 11.50
7 Sundries LS 5.00
C. LABOUR:
in Rs. in Rs.
6 Crew for Road roller Hour 11.50
108
IRR-CAW
8 mazdoor Day 38.00

ABSTRACT:
Total Rs: 0.00
IRR-CAW-7-2 Providing cohesive non-swelling ( CNS ) soil lining to canals using soil from approved borrow
area including spreading soil in layers of thickness not more than 15 cm, breaking clods,
watering, compacting to density control of not less than 95 percent or as stipulated,
dressing to required profile etc., complete with initial lead upto 1 km and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Nil 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
6 Diesel road roller 8-10 tonnes Hour 10.00
7 Sundries LS 5.00
C. LABOUR:
in Rs. in Rs.
6 Crew for Road roller Hour 10.00
8 mazdoor Day 38.00
ABSTRACT:
Total Rs: 0.00
109
IRR-CAW
IRR-CAW-7-3 Providing cohesive non-swelling ( CNS ) soil lining to canal using soil collected in heaps
along the edge of canal requiring CNS soil lining as part of the disposal of excavated soil from
canal excavation in CNS soil reach including spreading in layers of thickness not more than
15 cm, breaking clods, watering, compacting to density control of not less than 95 percent
or as stipulated, dressing to required profile etc., complete with lead upto upto 50 m and all
lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Nil 0.00 0.00 0.00
0.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
1 Angle Dozer 90 hp Hour 1.50 0.00 0.00
2 Pump 5 hp ( diesel ) Hour 5.00 0.00 0.00
4 Diesel road roller 8-10 tonne Hour 13.00 0.00 0.00
5 Sundries LS 5.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
4 Crew for Road roller Hour 13.00 0.00 0.00
6 mazdoor Day 38.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-7-4 Providing and fixing 20 x 20 x 75 cm size top surface neatly dressed canal bed level
stones including cost of all materials, labour, excavation, fixing in position to correct level etc.,
complete with lead upto 50 m and all lifts.
DATA: Assuming 0.5 hour for excavation and fixing each stone.
Consider 1 work inspector & 2 mazdoors for fixing 32 stones / day
Consider 2 Stone chiseller Cl- I for top surface dressing of 32 stones.
RATE ANALYSIS UNIT : 32 Nos.

A. MATERIALS:
in Rs. in Rs.
1 Rough stone 20x20x75 cm Each 32.00
0.00
110
IRR-CAW
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 Stone chiseller Cl- I Day 2.00
3 mazdoor Day 2.00
ABSTRACT:
Total Rs: 0.00
Total cost for 32 Nos Rs. 0.00
Rate per No=(A+B+C+D) /32 Rs: 0.00
IRR-CAW-7-5 Providing, fabricating and placing in position reinforcement steel bars for RCC works
including cleaning, straightening, cutting, bending, hooking, lapping, tying with 1.25 mm dia.
soft annealed steel wire, welding wherever required including cost of all materials, machinery,
labour etc., complete with initial lead upto 50 and all lifts.
DATA: Lap jointing considered assuming all reinforcement below 36 mm dia.

Quantity of binding wire per tonne : 8 kg
Wastage of steel : 5 percent
Cleaning and str : 1 Bar benders & 2 mazdoors
Marking, cutting : 2 Bar benders & 4 mazdoors
Fixing & tying wi : 2 Bar benders & 4 mazdoors
Checking / corre : 1 Bar benders & 1 mazdoors
RATE ANALYSIS UNIT : 1000.00 kg

A. MATERIALS:
in Rs. in Rs.
3 Sundries ( chairs / spacers etc ) LS 10.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 11.00
ABSTRACT:
Total Rs: 0.00
Total cost for 1000.00 kg Rs. 0.00
Rate per Kg=(A+B+C+D) /1000 Rs: 0.00
IRR-CAW-7-6 Providing and laying 75 mm thick in-situ M-15 ( 28 days cube compressive strength not less
111
IRR-CAW
than 15 N / sqmm ) grade cement concrete with 20 mm down size approved, clean, hard,
graded aggregates for canal lining using vibrating cylinder type mechanical paver including
cost of all materials, machinery, labour, cleaning, batching, mixing, placing in position,
finishing, forming contraction joints, fixing PVC joint sealing strips, curing, shifting of paver
from one side to other side of canal etc., complete with initial lead upto 1 km and all lifts.
( 43 Gr Cement content: 19.2 kg / sqm for use of super plasticiser(0.4% by wt. of cement),
CA : 0.80cum, Blending Ratio of CA--65:35, FA : 0.45 cum)
DATA:
RATE ANALYSIS UNIT : 960 sqm
A. MATERIALS:
in Rs. in Rs.
1 Cement 43 Gr kg 19008.00
5 PVC sealing strip Rm 640.00
7 Use rate of paving cylinder sqm 960.00
8 Sundries LS 5.00
Add Seignorage charges on CA @ Rs: ( Included in material Rs: 0
Add Seignorage charges on FA @ Rs: ( Included in material Rs: 0
B. MACHINERY:
in Rs. in Rs.
Lubricants etc @ 5 % Hour 8.00
2 Transit mixer 3 Nos Hour 24.00
3 Mechanical paver Hour 8.00
4 DG set for batching plant 50 KVA Hour 8.00
5 DG set for paver 30 KVA Hour 8.00
6 Shovel 0.5 cum / Loader Hour 2.00
7 Water tanker Hour 8.00
8 Pump 5 hp(diesel) 2 Nos. 4 hrs Hour 8.00
9 Sundries ( power line etc ) LS 5.00
C. LABOUR:
in Rs. in Rs.
2 Crew for Transit mixer Hour 24.00
3 Crew for Concrete paver Hour 8.00
4 Crew for DG set Hour 16.00
7 Crew for Pump Hour 16
8 Mason Class I Day 2
9 Mechanic Day 1
10 Fitter Day 1
11 Electrician Day 1
12 work inspector Day 2
13 mazdoor ( BP site ) Day 5
14 mazdoor ( Paver site ) Day 10
ABSTRACT:
C. Cost of Labour Rs: 0
Total Rs: 0
Add for shifting & re-erection of 0% Rs: 0
Add for LH / RH shifting & erect 0% Rs: 0
Add for ledge cutting / erection o 0% Rs: 0
Total Rs: 0.00
112
IRR-CAW

overheads on
A+B+C+percentages above 0% Rs: 0
Total cost for 960 sqm Rs. 0.00
Rate per sqm=(A+B+C+D) /960 Rs: 0
IRR-CAW-7-7 Providing and laying 80 mm thick in-situ M-15 ( 28 days cube compressive strength not less
than 15 N / sqmm ) grade cement concrete with 20 mm down size approved, clean, hard,
graded aggregates for canal lining using vibrating cylinder type mechanical paver including
cost of all materials, machinery, labour, cleaning, batching, mixing, placing in position,
finishing, forming contraction joints, fixing PVC joint sealing strips, curing, shifting of paver
from one side to other side of canal etc., complete with initial lead upto 1 km and all lifts.
( 43 Gr Cement content: 19.2 kg / sqm for use of super plasticiser(0.4% by wt. of cement),
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Cement 43 Gr kg 20275.20
8 Sundries LS 5.00
Add Seignorage charges on CA @ Rs: ( Included in material Rs: 0
Add Seignorage charges on FA @ Rs: ( Included in material Rs: 0
B. MACHINERY:
in Rs. in Rs.
4 DG set for batching plant 50 KVA Hour 8.00
6 Shovel 0.5 cum / Loader Hour 2.00
8 Pump 5 hp(diesel) 2 Nos. 4 hrs Hour 8.00
9 Sundries ( power line etc ) LS 5.00
C. LABOUR:
in Rs. in Rs.
9 Mechanic Day 1
10 Fitter Day 1
ABSTRACT:
113
IRR-CAW

C. Cost of Labour Rs: 0
Total Rs: 0
Add for shifting & re-erection of 0% Rs: 0
Add for LH / RH shifting & erect 0% Rs: 0
Add for ledge cutting / erection o 0% Rs: 0
Total Rs: 0.00
overheads on
Rate per sqm=(A+B+C+D) /960 Rs: 0
IRR-CAW-7-8 Providing and laying 100 mm thick in situ M-15 (28 days cube compressive strength not less than
15 N /Sqmm ) grade cement concrete with 20 mm down size approved, clean, hard, graded
aggregates for canal lining using, vibrating, cylinder type mechanical paver including cost of all
materials, machinery, labour, cleaning, batching, mixing, placing in position, finishing, forming
contraction joints, fixing PVC joint sealing strips, curing, shifting of paver from one side to othere
side of canal etc., complete with initial lead upto 1 Km and all lifts.
( 43 Gr Cement content: 24 kg / sqm for use of super plasticiser(0.4% by wt. of cement),
DATA:
RATE ANALYSIS UNIT : 800 Sqm
A. MATERIALS:
Sl.No Particulars Unit Qty Rate in Rs. Amount
1 Cement 43 Gr Kg 21120
3 Fine aggregate (Screened) cum 39.6
5 PVC sealing strip Rm 533
6 Use rate of paving cylinder sqm 800
Add seignorage charges on CA & Rs. (includedd in material rate) 0
Add seignorage charges on FA & Rs. (included in material rate) 0
B. MACHINERY:
1 Batching plant Hour 8
2 Transit mixer 3 Nos Hour 24
Fuel / Energy charges Hour 24
3 Mechanical paver Hour 8
lubricants etc @ 5% Hour 8
4 DG set for batching plant 50 KVAHour 8
5 DG set for paver 30 KVA Hour 8
6 Water tanker Hour 8
7 Pump 5 hp (diesel) 2 Nos. 4 hrs Hour 8
Fuel / Energy charges 8
Total hire charges of Machinery Rs. 0
C. LABOUR:
in Rs. in Rs.
6 Crew for Water tanker Hour 8
9 Mechanic Day 1
10 Fitter Day 1
114
IRR-CAW

ABSTRACT
A. Cost of Materials including seignorage charges Rs. 0
B. Hire charges of Machinery Rs. 0
TOTAL Rs. 0
Add for shifting & re-erection of BP @ 0% Rs. 0
Add for LH / RH shifting & erection of Paver 0% Rs. 0
Add for ledge cutting / erection of tracks etc 0% Rs. 0
Total Rs: 0.00

overheads on
Rate per sqm=(A+B+C+D) /800 Rs. 0
IRR-CAW-7-9 Dismantling, shifting and re-erecting mechanical concrete paver and DG set with all
accessories across canal CD work or other locations wherever shifting and re-erecting is
necessary including aligning paver correctly for continuing canal lining work, cost of all
materials, machinery, labour etc., complete with all leads and lifts.
Note: Local shifting and re-erection of paver for LH and RH side lining included in concrete lining rates
under items 51 and 52 and saperate rate for shifting shall not be allowed.
DATA: Dismantling, shifting and re-erecting mechanical concrete paver is necessary at each CD work
location. As CD works will not be at any fixed interval separate rate is proposed for dismantling,
shifting and re-erection of paver. As per the information collected from equipment suppliers
1 day time is required for dismantling, shifting and re-erection of paver and DG set including
aligning.
Deploy paver crew for 1 day.
Deploy mazdoors 6 Nos for 1 day to assist paver crew.
Deploy tipper for 4 hours with fuel charges for 1 hour for shifting.
RATE ANALYSIS UNIT : 1.00 Shifting

A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
B. MACHINERY:
in Rs. in Rs.
1 Tipper Hour 4.00
2 Sundries (ropes / rails etc) LS 1.00
C. LABOUR:
in Rs. in Rs.
2 Crew for Paver Hour 8.00
3 mazdoor Day 6.00
ABSTRACT:
Total Rs: 0.00

overheads on
Total cost for 1.00 Shifting Rs. 0.00
Rate per shifting=(A+B+C+D) /1 Rs: 0.00
IRR-CAW-7-10 Providing and laying insitu vibrated M-10 ( 28 days cube compressive strength not less than
10 N /sq mm ) grade cement concrete using 40 mm down size approved, clean, hard, graded
aggregates for bed and side lining of canal(150mm thick) including finishing the junction of bed and sides
to required curveture, cost of all materials, machinery, labour, formwork including supports,
115
IRR-CAW
cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing etc.,
complete with initial lead upto 50 m and all lifts. ( Cement content : 190 kg / cum )
( 43 Gr Cement content: 190 kg / cum for use of super plasticiser(0.4% by wt. of cement),
For small canals consider locally fabricated manually operated paver for in-situ concrete lining.
By operating the screw jack the side shuttering can be positioned in place.
Consider laying of concrete in panels of 3 m length.
Assume 1.5 m bed width and 1.2 m depth of flow.
Considering 0.3 m free board the size of shuttering for 3 m length panal will be 9.60 sqm on
either side including curved portions and over laps.
As the paver will be released soon after completing concreting upto top level of lining and moved
to next portion to be lined 200 uses can be considered as life of paver.
Further it is assumed that the shuttering of paver will be oiled after every 4 uses of the paver.
Considering this the quantity of shutter oil is assumed at 0.05 ltr / sqm.
DATA: Requirement of materials :
For 1 cum CC :- Coarse aggregates : 0.90 cum Blending ratio : 50 :30 : 20
A. MATERIALS:
in Rs. in Rs.
Cement for incidentals @ 5 kg / kg 160.00
3 Fine aggregate cum 12.8
6 Use rate of manual paver sqm 234.00
7 Sundries LS 2.00
Add seignorage charges on CA & Rs. (includedd in material Rs: 0.00
Add seignorage charges on FA & Rs. (includedd in material Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Concrete mixer 600/400 ltr ( diese Hour 16.00
4 Needle vibrator 40 mm dia ( petro Hour 16.00
C. LABOUR:
in Rs. in Rs.
7 Fitter Day 1.00
8 mazdoor
116
IRR-CAW

for laying and moving paver Day 6.00
ABSTRACT:
Total Rs: 0.00
overheads on
IRR-CAW-7-11 Providing and laying insitu vibrated M-10 (28 days cube compressive strength not less than
10 N/sqm) grade cement concrete using 40 mm down size approved, clean, hard, graded
aggregade for bed and side lining of canal(100 mm thick) including, finishing the junction of bed and sides
to required curvature, cost of all materials, machinery, labour, formwork including supports
complete with initial lead up to 50 m and all lifts (Cement content: 190 kg/cum)
( 43 Gr Cement content: 190 kg / cum for use of super plasticiser(0.4% by wt. of cement),
DATA:
For 1 cum CC:- Coarse aggregates: 0.90 cum Blinding ratio :50:30:20
Fine aggregate: 0.40cum Cement Content : 190 KSuper Plasticizer: 0.76 kg
average output of 600/400 ltr mixer.25cum/day.
RATE ANALYSIS UNIT: 37 cum
A. MATERIALS:
Cement for incidentals @0. 5 Kg kg 18.50
2 Coarse aggregate 40mm cum 16.65
Coarse aggregate 20 mm . cum 9.99
Coarse aggregate 10 mm . cum 6.66
Total Rs. 0.00
Add seigniorage charges on CA (includedd in material rate) 0.00
Add seigniorage charges on FA (includedd in material rate) 0.00
B. MACHINERY:
1 Concrete mixer 600/400 ltr (dieseHour 16.00
2 5 hp pump (diesl) Hour 0.50
4 Needle vibrator 40 mm die (petroHour 4.00
C. LABOUR:
in Rs. in Rs.
7 Fitter Day 1.00
8 mazdoor
117
IRR-CAW

ABSTRACT
A. Cost of Materials including royalty charges Rs. 0.00
Total Rs. 0.00
overheads on
A+B+C+percentages above 0% 0.00
Total cost for 37 cum Rs. 0.00
Rate per cum=(A+B+C+D) /37 Rs. 0.00
IRR-CAW-7-12 Providing and laying100mm thick insitu vibrated M-10 (28 days cube compressive strength-not less than
10.00 N / sq mm) grade cement concrete using 40 mm down size approved, clean, hard, graded
aggregates for bed and side lining of canal lining using vibrating cylindertype mechanical paver
including cost of all materials mechinery labour batching mixing placing in position forming
contraction joints fixing pvc joint seiling strips shifting of paver from one side of canal to other
side etc.complete with 1 km lead & all lifts.
(Cement content: 190 kg / cum for use of super plasticiser(0.4% by wt. of cement),
DATA:
A. MATERIALS:
1 Cement 43 Gr Kg 16720.00
2 Coarse aggregate 40 mm cum 39.60
Coarse aggregate 20 mm cum 23.76
Add seignorage charges on CA &(includedd in material rate) 0.00
Add seignorage charges on FA &(includedd in material rate) 0.00
B. MACHINERY:
lubricants etc @ 5% Hour 5.00
4 DG set for batching plant 50 KVAHour 8.00
7 Pump 5 hp (diesel) 2 Nos. 4 hrs Hour 8.00
C. LABOUR:
in Rs. in Rs.
9 Mechanic Day 1
10 Fitter Day 1
118
IRR-CAW

ABSTRACT
TOTAL Rs. 0.00
Add for LH / RH shifting & erection of Paver 0.0% Rs. 0
Total Rs: 0.00
overheads on
Total cost for 800.00 Sqm Rs. 0.00
Rate per sqm=(A+B+C+D) /800 Rs. 0.00
aggregates for bed and side lining of canal including finishing the junction of bed and sides

For 1 cum CC :- Coarse aggregates : 0.80 cum Blending ratio : 65 :35
Fine aggregate : 0.45 cum Cement content : 220 kg Super plasticizer : 0.88 kg.
A. MATERIALS:
in Rs. in Rs.
6 Sundries LS 2.00
Add seignorage charges on CA & Rs. (includedd in material Rs: 0.00
Add seignorage charges on FA & Rs. (includedd in material Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
7 Fitter Day 1.00
8 mazdoor
119
IRR-CAW

ABSTRACT:
Total Rs: 0.00
aggregates for bed and side lining of canal(150 mm thick) including finishing the junction of bed and sides

Fine aggregate : 0.40 cum Cement content : 210 Super plasticizer : 0.84 kg
A. MATERIALS:
in Rs. in Rs.
6 Sundries LS 2.00
Add Seignorage charges on CA & Rs. (includedd in materia Rs: 0.00
Add Seignorage charges on FA & Rs. (includedd in material Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
7 Fitter Day 1.00
8 mazdoor
for laying Day 6.00
ABSTRACT:
120
IRR-CAW

Total Rs: 0.00
aggregates for bed and side lining of canal(100 mm thick) including finishing the junction of bed and sides
CA : 0.80 cum, Blending Ratio of CA--65:35, FA : 0.45 cum)

A. MATERIALS:
in Rs. in Rs.
7 Sundries LS 2.00
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
7 Fitter Day 1.00
8 mazdoor
ABSTRACT:
Total Rs: 0.00
121
IRR-CAW

IRR-CAW-7-16 Providing and laying150mm thick insitu vibrated M-15 (28 days cube compressive strength-not less than
15.00 N / sq mm) grade cement concrete using 20 mm down size approved, clean, hard, graded
aggregates for bed and side lining of canal lining using vibrating cylindertype mechanical paver
including cost of all materials mechinery labour batching mixing placing in position forming
contractiom joints fixing pvc joint seiling strips shifting of paver from one side of canal to other
side etc.complete with 1km lead & all lifts.
CA : 0.80 cum, Blending Ratio of CA--65:35, FA : 0.44 cum)
DATA:
A. MATERIALS:
1 Cement 43 Gr Kg 21120.00
2 Coarse aggregate 20 mm cum 45.76
Add seignorage charges on CA &(included in material rate) 0.00
Add seignorage charges on FA &(included in material rate) 0.00
B. MACHINERY:
lubricants etc @ 5% Hour 5.00
4 DG set for batching plant 50 KVAHour 8.00
7 Pump 5 hp (diesel) 2 Nos. 4 hrs Hour 8.00
C. LABOUR:
in Rs. in Rs.
9 Mechanic Day 1
10 Fitter Day 1
ABSTRACT
TOTAL Rs. 0.00
Add for LH / RH shifting & erection of Paver 0.0% Rs. 0
Total Rs: 0.00
122
IRR-CAW

overheads on
Total cost for 800.00 Sqm Rs. 0.00
IRR-CAW-7-17 Providing and fixing pre-cast RCC template walls consisting of 0.05 cum M-15 grade
concrete using 20 mm down size coarse aggregates and 10 kg reinforcement steel moulded
as per specifications and drawing in CM 1:4 proportion including cost of all materials,
machinery, labour, formwork, fabricating and placing reinforcement steel, mixing, laying,
conveying and fixing in position including necessary excavation for seating, finishing joints in
CM 1:4, curing etc., complete with initial lead upto 1 km and all lifts.
DATA: Details of template wall blocks:

1.80 m long inverted T - section with keys on either end.
Base : 225 mm xTop : 75 mm x 63 mm Key : 150 mm depth
RATE ANALYSIS UNIT : 20.00 templete

A. MATERIALS:
in Rs. in Rs.
4 Reinforcement steel kg 200.00
5 Binding wire kg 3.00
6 Use rate of mould set 20.00
7 Sundries( water charges & misc. LS 1.00
B. MACHINERY:
in Rs. in Rs.
1 Hand mixer Hour 8.00
0.00
C. LABOUR:
in Rs. in Rs.
2 Mason Class I for fixing Day 1.00
3 Mason Class II for casting Day 2.00
5 mazdoor ( casting yard ) Day 4.00
mazdoor ( for fixing ) Day 2.00
mazdoor for conveying Day 2.00
ABSTRACT:
A. Cost of Materials including serignorage charges Rs: 0.00
Total Rs: 0.00
Total cost for 20.00 template Rs. 0.00
Rate per Rm=(A+B+C+D) /20 Rs: 0.00
IRR-CAW-7-18 Providing and fixing 50 mm dia perforated GI pressure relief pipes 12.50 cm long with
one end closed with perforated GI plate and other end provided with alluminium lid hinged
to pipe including cost of all materials, labour, drilling 8 mm dia holes etc., complete with all
123
IRR-CAW
leads and lifts.
DATA: Consider 10 Nos perforated 50 mm dia GI pipes 12.50 cm long each.

A. MATERIALS:
in Rs. in Rs.
1 GI pipe 50 mm dia 10 Nos Rm 1.25
2 GI plate & Alluminium lid ( hinged LS 10.00
B. MACHINERY:
in Rs. in Rs.
1 Drilling 8 mm dia holes LS 0.50
0.00
C. LABOUR:
in Rs. in Rs.
mazdoor Day 0.50
ABSTRACT:
Total Rs: 0.00
Total cost for 10.00 Nos. Rs. 0.00
Rate per Each=(A+B+C+D) /10 Rs: 0
IRR-CAW-7-19 Providing and fixing 50 mm dia perforated GI pressure relief pipes 22.50 cm long with
leads and lifts.
DATA: Consider 10 Nos perforated 50 mm dia GI pipes 22.50 cm long each.

Nos.
RATE ANALYSIS UNIT : 10
A. MATERIALS:
in Rs. in Rs.
B. MACHINERY:
in Rs. in Rs.
0.00
C. LABOUR:
in Rs. in Rs.
mazdoor Day 0.50
ABSTRACT:
Total Rs: 0.00
Rate per Each=(A+B+C+D) /10 Rs: 0
124
IRR-CAW
IRR-CAW-7-20 Providing and fixing 50 mm dia perforated GI pressure relief pipes 30 cm long with
leads and lifts.
DATA: Consider 10 Nos perforated 50 mm dia GI pipes 30 cm long each.

Nos.
RATE ANALYSIS UNIT : 10
A. MATERIALS:
in Rs. in Rs.
B. MACHINERY:
in Rs. in Rs.
0.00
C. LABOUR:
in Rs. in Rs.
mazdoor Day 0.50
ABSTRACT:
Total Rs: 0.00
Rate per Each=(A+B+C+D) /10 Rs: 0.00
leads and lifts.

A. MATERIALS:
in Rs. in Rs.
1 GI pipe 50 mm dia 10 Nos Rm 4.50 0.00 0.00
2 GI plate & Alluminium lid ( hinged LS 10.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
1 Drilling 8 mm dia holes LS 10.00 0.00 0.00
0.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
mazdoor Day 0.50 0.00 0.00
ABSTRACT:
Total Rs: 0.00
125
IRR-CAW

leads and lifts.

A. MATERIALS:
in Rs. in Rs.
1 GI pipe 50 mm dia Rm 7.50
B. MACHINERY:
in Rs. in Rs.
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 0.50
ABSTRACT:
Total Rs: 0.00
IRR-CAW-7-23 Providing and fixing 100 mm dia perforated PVC pipes 40 cm long for Weep holes
including cost of all materials, labour, drilling 8 mm dia holes etc. complete with all
leads and lifts.
DATA: Consider 10 Nos 100 mm dia PVC pipes 40 cm long each
RATE ANALYSIS UNIT: 10 Nos.

A. MATERIALS:
Amount in
1 PVC pipe 100 mm dia 10 Nos Rm 10.00
B. MACHINERY
Amount in
Sl.No Description Unit Quantity Rate in Rs.
Rs.
1 Nill 0.00
0.00
Total hire chargs of Machinery Rs. 0.00
C. LABOUR
Amount in
2 Man Mazdoor Day 0.25
Total cost of Labour Rs. 0.00
ABSTRACT
A. Cost of Materials Rs. 0.00
126
IRR-CAW

Total Rs: 0.00
Rate per Each=(A+B+C+D) /10 Rs. 0.00
IRR-CAW-7-24 Drilling 32 mm dia pressure relief hole below pressure relief pipe for bed and side lining of
canal laid on rock including cost of all materials, machinery, labour etc., complete with all
leads and lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
B. MACHINERY:
in Rs. in Rs.
1 Air compressor 8.5 cmm diesel Hour 1.00
2 Jack hammer 2 Nos. Hour 2.00
C. LABOUR:
in Rs. in Rs.
ABSTRACT:
Total Rs: 0.00
IRR-CAW-7-25 Providing and forming 35 x 35 x 40 cm deep filter drain consisting of 75 mm thick 10 mm

down coarse aggregate around pressure relief pipe and 75 mm thick sand around coarse
aggregate filter including cost of all materials, labour, excavation of pit etc., complete with
DATA: Consider 10 Nos filter drains.

Requirement of 10 mm down aggregate @ 0.015 cum / No. : 0.15 cum
Requirement of sand @ 0.035 cum / No. : 0.35 cum

A. MATERIALS:
in Rs. in Rs.
1 Coarse aggregate 10-4.75 mm cum 0.15
Add seignorage charges for Sand ( included in the material Rs: 0.00
Add seignorage charges for CA ( included in the material c Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
0.00
127
IRR-CAW
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 0.10
ABSTRACT:
Total Rs: 0.00
Total cost for 10 Nos. Rs: 0.00
IRR-CAW-7-26 Providing and fixing 25 to 40 mm thick Shahabad / Talikota / other similar stone slabs
with pointing and finishing joints neatly in CM 1:3 proportion for canal / field channel lining
including cutting slabs to required size, mixing mortar, finishing joints neatly, curing etc.,
complete with lead upto 50 m and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Shahabad Stone slabs sqm 105.00
Add seignorage charges for Slabs ( included in the material Rs: 0.00
Add seignorage charges for sand ( included in the material Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
1 Operator pump Hour 2.00
3 Mason Class I Day 4.00
4 Mason Class II Day 2.00
5 mazdoor Day 8.00
ABSTRACT:
Total Rs: 0.00
Total cost for 100 sqm Rs: 0.00
IRR-CAW-7-27 Fixing PCC slabs of various sizes in CM 1 : 3 proportion to the side slopes of canal
including preparing bed, flush pointing joints in CM 1 : 3 propn, cost of all materials ( excluding
PCC slabs ), labour, finishing, curing etc., complete with initial lead upto 50 m and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
2 Sand ( screened) cum 0.50
Add seignorage charges for sand ( included in the material Rs: 0.00
128
IRR-CAW
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
4 mazdoor Day 9.00
ABSTRACT:
Total Rs: 0.00

IRR-CAW-7-28 Fixing PCC lug slabs of various sizes in CM 1 : 3 proportion for supporting PCC slab lining
including necessary excavation, refilling, flush pointing joints in CM 1 : 3 propn, cost of all
materials ( excluding PCC lug slabs ), labour, finishing, curing etc., complete with initial lead
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Cement 43 Gr kg 58.00 0.00 0.00
2 Sand ( screened) cum 0.12 0.00 0.00
Add Seignorage charges on FA @ Rs. (included in material Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 5 hp pump ( diesel ) Hour 1.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
1 Operator pump Hour 1.00 0.00 0.00
3 Mason Class I Day 2.00 0.00 0.00
4 Mason Class II Day 1.00 0.00 0.00
5 mazdoor Day 5.00 0.00 0.00
6 Cartman with Bullock cart for wat Day 1.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-7-29 Fixing 30 cm height pre-cast drops for field channels as directed including excavation, etc.,
complete with all leads and lifts.
129
IRR-CAW
DATA: Requirement of materials for fixing drops. : Nill

Consider 1 work inspector, 1 Mason CL- II & 1 mazdoor for fixing 7 drops per day.

A. MATERIALS:
in Rs. in Rs.
1 Nill 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 1.00
ABSTRACT:
Total Rs: 0.00
Total cost for 7 Nos Rs: 0.00
IRR-CAW-7-30 Providing and fixing LDPE sheet for bed and sides of canal including cost of all materials,
labour, laying, joining etc., complete with all leads and lifts.
a. Using 500 micron thick LDPE sheet.
DATA: Consider 250 sqm LDPE sheet 500 micron thick laying per day.
Consider 10 percent extra sheet for joints & wastage.
Hot bitumen Grade 85 / 25 and 80 / 100 in the ratio of 2 : 1 considered for joining sheets.
Consider 1 mazdoor for assisting in laying work by supplier.

A. MATERIALS:
in Rs. in Rs.
1 LDPE sheet 500 micron thick sqm 275.00
2 Bitumen 85 / 25 and 80 / 100 Gr kg 4.00
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
130
IRR-CAW
0.00
C. LABOUR:
in Rs. in Rs.
1 Joining & laying @ 10 % of sheet sqm 250.00
2 mazdoor Day 1.00
ABSTRACT:
Total Rs: 0.00
Note : i ) If the surface on which the LDPE sheet is to be laid is too rough and undulating provide
average 75 mm thick unscreened sand backing to LDPE sheet.
For providing average 75 mm thick sand backing :
DATA: Quantity of sand ( unscreened ) ( 250 x 0.075 ) 18.75

2 mazdoors for laying 6 cum per day.

A. MATERIALS:
in Rs. in Rs.
0.00
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
0.00
C. LABOUR:
in Rs. in Rs.
1 mazdoor Day 6.00
ABSTRACT:
Total Rs: 0.00
b. Using 750 micron thick LDPE sheet.
Consider 10 percent extra sheet for joints & wastage.
Hot bitumen Grade 85 / 25 and 80 / 100 in the ratio of 2 : 1 considered for joining sheets.
Consider 1 mazdoor for assisting in laying work by supplier.

A. MATERIALS:
in Rs. in Rs.
1 LDPE sheet 750 micron thick 275.00
2 Bitumen 85 / 25 and 80 / 100 Gr 4.00
131
IRR-CAW
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 1.00
ABSTRACT:
Total Rs: 0.00
For providing average 75 mm thick sand back per sqm Rs: 0.00
c. Using 1000 micron thick LDPE sheet.
A. MATERIALS:
in Rs. in Rs.
1 LDPE sheet 1000 micron thick 275.00
2 Bitumen 85 / 25 and 80 / 100 Gr 4.00
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 1.00
ABSTRACT:
Total Rs: 0.00
For providing average 75 mm thick sand back per sqm Rs: 0.00
IRR-CAW-7-33 Providing and fixing 12 mm thick 380 mm depth tarfelt expansion joint filler boards for
stone masonry lining of canal including cost of all materials, labour etc., complete with all
leads and lifts.
132
IRR-CAW
DATA: Consider 100 m length of expansion joint.

A. MATERIALS:
in Rs. in Rs.
1 Tarfelt joint filler board 12 mm th sqm 38.75
0.00
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
0.00
C. LABOUR:
in Rs. in Rs.
1 Carpenter Cl- II Day 1.00
2 mazdoor Day 1.00
ABSTRACT:
Total Rs: 0.00
cement concrete lining of canal including cost of all materials, labour etc., complete with all
leads and lifts.

A. MATERIALS:
in Rs. in Rs.
0.00
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 1.00
ABSTRACT:
Total Rs: 0.00
cement concrete lining of canal including cost of all materials, labour etc., complete with all
leads and lifts.
133
IRR-CAW

A. MATERIALS:
in Rs. in Rs.
0.00
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 1.00
ABSTRACT:
Total Rs: 0.00

IRR-CAW-7-36 Providing and forming 35 mm wide and 10 mm thick construction / contraction joints
for concrete lining by mastic filler including cost of all materials, labour etc., complete with
all leads and lifts.
DATA: Consider 100 m length mastic filler joint.

A. MATERIALS:
in Rs. in Rs.
1 Asphalt 80/100 Gr kg 35.00
Sand ( screened ) cum 0.04
Add for seignorage charges for sand (included in the mater Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00 0.00 0.00
0.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
1 Mason Cl- II Day 0.50 0.00 0.00
2 mazdoor Day 1.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
Total cost for 100 Rm Rs. 0.00
IRR-CAW-7-37 Manufacturing 550 x 550 x 55 mm size PCC lining slabs in M-15 grade ( 28 days cube
134
IRR-CAW
compressive strength not less than 15 N /sqmm ) cement concrete using 20 mm down graded
coarse aggregate including cost of all materials, machinery, labour, batching, mixing, laying,
compacting, formwork, finishing, curing etc.,complete with initial lead upto 50 m and all lifts.
( Cement content : 240 kg / cum with super plastcizer (0.4% by wt. of cement), CA : 0.80 cum,
Blending Ratio of CA : 65:35, FA : 0.45cum)
DATA:
A. MATERIALS:
in Rs. in Rs.
5 Use rate of moulds for 500 uses No. 225.00
Add Seignorage charges on CA
@ Rs. (Included in material
rate) Rs: 0.00
Add Seignorage charges on FA
@ Rs. (Included in material
rate) Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Concrete mixer 300/200 ltr ( dies Hour 8.00
Aportioned hire charges of machinery for lini 0% Rs: 0.00
C. LABOUR:
in Rs. in Rs.
6 mazdoor
for batching materials / laying C Day 3.00
for demoulding / oiling / laying Day 2.00
for shifting slabs to curing pond Day 1.00
for stacking after curing Day 1.00
Aportioned cost of labour for lining slabs 0% Rs: 0.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-7-38 Manufacturing 550 x 300 x 55 mm size PCC lug slabs in M-15 grade ( 28 days cube
compressive strength not less than 15 N / sqmm ) cement concrete using 20 mm down graded
Blending Ratio of CA : 65:35, FA : 0.45cum)
DATA: For 1 cum CC :- Coarse aggregates : 0.80 cum Blending ratio : 65 : 35

Fine aggregate : 0.45 cum Cement content : 240 kSuper plasticizer : 0.96 kg
A. MATERIALS:
135
IRR-CAW

in Rs. in Rs.
Cement for incidentals @ 0.5 kg/ kg 12.50
Add Seignorage charges on CA @ Rs. (Included in material Rs: 0.00
Add Seignorage charges on FA @ Rs. (Included in material Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Concrete mixer 300/200 ltr ( dies Hour 8.00
Aportioned hire charges of machinery for lug 0% Rs: 0.00
C. LABOUR:
in Rs. in Rs.
6 mazdoor
for batching materials / laying C Day 3.00
for demoulding / oiling / laying Day 2.00
Aportioned cost of labourfor lug slabs 0% Rs: 0.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-7-39 Manufacturing 450 x 300 x 30 mm size PCC lining slabs in M-15 grade ( 28 days cube
FA : 0.43cum)
DATA: For 1 cum CC :- Coarse aggregates : 0.68 cum Fine aggregate : 0.43 cum
Cement content : 280 kg Super plasticizer : 1.12 kg
A. MATERIALS:
in Rs. in Rs.
2 Coarse aggregate 10 mm below cum 0.61
Add Seignorage charges on CA @ Rs. (Included in material Rs: 0.00
Add Seignorage charges on FA @ Rs. (Included in material Rs: 0.00
136
IRR-CAW
B. MACHINERY:
in Rs. in Rs.
1 Hand mixer 45 / 30 ltr Hour 8.00
Aportioned hire charges of machinery for lin 0% Rs: 0.00
C. LABOUR:
in Rs. in Rs.
5 mazdoor
for batching / mixing / laying Day 2.00
for demoulding / cleaning / oiling Day 2.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-7-40 Manucturing 450 x 150 x 30 mm size PCC lug slabs in M-15 grade ( 28 days cube
FA : 0.43cum)
A. MATERIALS:
in Rs. in Rs.
Add Seignorage charges on CA @ Rs. Rs: 0.00
(Included
Add in material
seignorage rate) on FA @ Rs.
charges Rs: 0.00
Total
(Included in cost of
material Materials
rate) Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
137
IRR-CAW
Aportioned hire charges of machinery for lu 0% Rs: 0.00
C. LABOUR:
in Rs. in Rs.
5 mazdoor
Aportioned cost of labour for lug slabs 0% Rs: 0.00
ABSTRACT:
Total Rs: 0.00
Manufacturing 600 x 300 x 100mm size PCC lining slabs in M-15 grade (28 days cube
IRR-CAW-7-41 compressive
than 15 N/Sqmm)strength not less
cement concrete using 10mm down grades coarse aggregate including cost of all
materials,
machinery, labour, batching, mixing, laying, compacting, formwork, finishing, curing etc., complete
with initial lead upto
50 m and all lifts.
FA : 0.45cum, Blending Ratio of CA--65:35)
DATA For 1 cum CC :- Coarse aggregates : 0.80 cum Fine aggregate : 0.45 cum Cement content : 280kg
Super placticizer : 1.12 kg
RATE ANALYSIS UNIT: 225 Nos.
A. MATERIALS :
Sl. No Particulars Unit Quantity Rate Amount in

in Rs. Rs.
1 Cement for mix Kg 252
2 Cement for incidentals @ 0.5kg/s Kg 112.5
3 Coarse aggregate 20 mm below Cum 0.468
4 Coarse aggregate 10 mm below Cum 0.252
5 Fine aggregate (screened) Cum 0.414
7 Use rate of moulds for 250 uses No. 225
Add seignorage charges on CA @ Rs. (Included in material 0
Add seignorage charges on FA @ Rs. rate)
(Included in material 0
rate)
Total Cost of Materials Rs. 0
B. MACHINERY :

in Rs. Rs.
1 Diesel mixer 300/400 Hour 8
Fuel/Energy charges Hour 8
2 5 hp pump (diesel) Hour 0.1
Fuel/Energy charges Hour 0.1
Fuel/Energy charges Hour 0.2
Aportioned hire charges of 0% 0.00
machinery @ 90% for lining
C. LABOUR : slab Rs.
in Rs. Rs.
2 Crew for water tanker Hour 0.2
3 Mason Class-I Day 2
4 Class II Mason Day 1
5 ManMazdoor
138
IRR-CAW
For batching materials/laying Day 2

For demoulding/cleaning/oiling 2
For shifting slabs to curing pond 1
For stacking after curing 1
For cleaning & miscellaneous Day 1
Total Cost of Labour Rs. 0.00
Aportioned cost of labour for 0% 0.00
ABSTRACT
lining slabs : Rs.
A. Cost of Material including seignorage Rs. 0
B. Hire Charges of Machinery Rs. 0.00
Total Rs: 0.00
Rate per Each=(A+B+C+D) /225 Rs. 0
IRR-CAW-7-42 Manucturing 400 x 400 x 30 mm size PCC lining slabs in M-15 grade ( 28 days cube
compressive strength not less than 15 N / sqmm )cement concrete using 10 mm down graded
FA : 0.43cum)
Cement content Super plastic 1.12 kg
A. MATERIALS:
in Rs. in Rs.
(Included in material
Add seignorage rate) on FA @ Rs.
charges Rs: 0.00
Total
material Materials
rate) Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
Aportioned hire charges of machinery for linin 0% Rs: 0.00
C. LABOUR:
in Rs. in Rs.
5 mazdoor
ABSTRACT:
Total Rs: 0.00
139
IRR-CAW

IRR-CAW-7-43 Manufacturing 400 x 150 x 30 mm size PCC lug slabs in M-15 grade ( 28 days cube
compressive strength not less than 15 N /sqmm ) cement concrete using 10 mm down graded
FA : 0.43cum)
A. MATERIALS:
in Rs. in Rs.
(Included
Add in material
Seignorage rate) on FA @ Rs.
charges Rs: 0.00
Total
material Materials
rate) Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
Aportioned hire charges of machinery for lu 0% Rs: 0.00
C. LABOUR:
in Rs. in Rs.
5 mazdoor
Aportioned cost of labour for lug slabs 0% Rs: 0.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-7-44 Providing and laying uncoursed rubble stone masonry in CM 1 : 5 proportion for canal side
lining using stones and chips from approved quarry including cost of all materials,
machinery, labour, forming weep holes at specified intervals, finishing, curing etc., complete
with initial lead upto 50 m and all lifts.
(rubble stones : 0.96 cum, Stone Chips : 0.15cum, Through Stones 20 x 20 x 30cm : 1/sqm)
140
IRR-CAW
DATA:
A. MATERIALS:
in Rs. in Rs.
3 Uncoursed rubble stones at quar cum 9.60
4 Through stones 20x20x30 cm Nos 32.00
5 Stone chips at quarry cum 1.50
Add seignorage charges on UCR( Included in material rate ) 0.00
Add seignorage charges on san ( Included in material rate ) 0.00
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
5 mazdoor Day 8.00
ABSTRACT:
Total Rs: 0.00
Providing and laying uncoursed rubble stone masonry in CM 1:5 proportion for canal side lining using stones
IRR-CAW-7-45 from
approved quarry including cost of all materials, machinery, labour, forming weep holes at specified intervals,
finishing,
curing etc., complete with initial lead upto 50m and all lifts.(without pin headers)
( rubble stones : 1.1 cum)
DATA Requirement of materials for laying 10 cum UCR Masonry lining in CM 1:5
RATE ANALYSIS UNIT: 10
A. MATERIALS :
in Rs. Rs.
1 Cement 43 Gr Kg 979.2
2 Sand (Screened) Cum 3.4
3 Uncoursed rubble stones at Cum 11
quarry
Add seignorage charges on UCR/chips @ (Included in material 0
Rs.
Add seignorage charges on sand @ Rs. rate)
(Included in material 0
rate)
B. MACHINERY :

in Rs. Rs.
1 Hand Mixing Charges Hour 8
2 5 hp pump (diesel) Hour 4
C. LABOUR :
141
IRR-CAW

in Rs. Rs.
1 Operator pump Hour 4
3 Mason Class II Day 6
4 Man Mazdoor Day 29
5 Cartman with Bullock cart for Day 1
water
ABSTRACT :
B. Hire Charges of Machinery Rs. 0
Total Rs: 0.00
IRR-CAW-7-46 Providing and laying uncoursed rubble stone masonry in CM 1 : 5 proportion for canal side
lining using stones and chips from canal excavation including cost of all materials,
machinery, labour, forming weep holes at specified interval, finishing, curing etc., complete
( rubble stones : 0.96 cum, Stone Chips : 0.15cum, Through Stones 20 x 20 x 30cm : 1/sqm)
Note: Stones and chips will be issued from dump yard at specified issue rate.
DATA:
A. MATERIALS:
in Rs. in Rs.
3 Uncoursed rubble at dump yard cum 9.60
4 Through stones 20x20x30 cm Nos 33.00
5 Stone chips at dump yard cum 1.50
Add seignorage charges on san ( Included in material rate ) 0.00
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
6 mazdoor Day 9.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-8 ROCK PITCHING:
IRR-CAW-8-1 Providing and laying uncoursed rubble stone masonry in CM 1:5 proportion for canal side lining using stones from
canal excavation including cost of all materials, machinery, labour, forming weep holes at specified intervals, finishing,
142
IRR-CAW
curing etc., complete with initial lead upto 50m and all lifts.
( rubble stones : 1.1cum, cement : 98kg, sand 0.34 cum)
DATA Requirement of materials for laying 10 cum UCR Masonry lining in CM 1:5
RATE ANALYSIS UNIT: 10 Cum
A. MATERIALS:

in Rs. Rs.
1 Cement 43 Gr Kg 980
2 Sand (Screened) Cum 3.4
3 Uncoursed rubble at dump yard Cum 11
Add seignorage charges on sand @ Rs. (Included in material 0
B. MACHINERY :

in Rs. Rs.
1 Hand Mixing Charges Hour 8
2 5 hp pump (diesel) Hour 4
C. LABOUR :

in Rs. Rs.
1 Operator pump Hour 4
3 Mason Class II Day 6
4 Man Mazdoor Day 29
5 Cartman with Bullock cart for Day 1
water
ABSTRACT :
Total Rs: 0.00
IRR-CAW-8-2 Providing and constructing 25 cm thick dry rubble stone pitching with pin headers at 2 per
sqm including cost of all materials, labour, hand packing, finishing etc., complete with initial
( rubble stones : 0.23 cum/sqm, Stone Chips : 0.0375cum/sqm, Pin Headers 30cm : 2/sqm)
DATA: Requirement of materials for constructing 100 sqm pitching:

A. MATERIALS:
in Rs. in Rs.
2 Pin header (Through stone) 30 Nos 200.00
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
0.00
C. LABOUR:
143
IRR-CAW
in Rs. in Rs.
3 mazdoor Day 6.00
ABSTRACT:
Total Rs: 0.00
Note: If 15 cm thick murum bed is to be provided below pitching

(Murum : 18 cum/sqm)
DATA: Consider 100 sqm area of pitching:
Requirement of labour for spreading and tamping:
Consider 4 mazdoors.

A. MATERIALS:
in Rs. in Rs.
1 Murum cum 18.00
0.00
Add seignorage charges on mu ( Included in material rate ) 0.00
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
0.00
C. LABOUR:
in Rs. in Rs.
1 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-8-3 Providing and constructing 25 cm thick dry rubble stone pitching including cost of all materials, labour,
hand packing, finishing etc., complete
( rubble stones : 0.33 cum/sqm)
DATA Requirement of materials for constructing 100 Sqm pitching :
RATE ANALYSIS UNIT: 100

A. MATERIALS :

in Rs. Rs.
1 Uncoursed rubble stones at Cum 33
quarry
B. MACHINERY :

in Rs. Rs.
1 Nil 0
0
144
IRR-CAW
C. LABOUR :

in Rs. Rs.
2 Mazdoor Day 3.1
ABSTRACT :
Total Rs: 0.00
NOTE: If 15 cm thick murum bed is to be provided below pitching in Rs. 0.00
( As per rate analysis under item 91- Note )
DATA:
A. MATERIALS:
in Rs. in Rs.
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 6.00
ABSTRACT:
Total Rs: 0.00

NOTE: If 15 cm thick murum bed is to be provided below pitching add 0.00
( As per rate analysis under item 91- Note )
IRR-CAW-8-5 Providing and Constructing 30 cm thick dry rubble stone pitching

including cost of all materials,labour,hand packing,finishing etc.,complete
DATA :
A. MATERIALS :
145
IRR-CAW
Rate Amount
Sl No Particulars Unit Quantity
in Rs in Rs
Uncoursed rubble stones at

1 Cum 33.00
Quarry
Add for seignorage Charges on UCR/Chips @Rs 0.00

( Included in material Rate)
0.00
Total Cost of materials Rs :
B.MACHINERY :
Rate Amount
in Rs in Rs
1 Nill 0.00
0.00
Total hire charges of machinery

0.00
Rs :
C.LABOUR :
Rate Amount
in Rs in Rs

2 Mazdoor Day 2.10
Total cost of labour
0.00
Rs :
ABSTRACT
A.Cost of Materials including ryolty charges Rs: 0.00
C.Cost of Labour Rs: 0.00
Total Rs: 0.00
Rate per sqm=(A+B+C+D) /100 Rs : 0.00
NOTE: If 15 cm thick murum bed is to be provided below pitching Rs : 0.00
Add ( As per rate analysis under item 91 - Note)
DATA:
A. MATERIALS:
in Rs. in Rs.
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 9.00
ABSTRACT:
146
IRR-CAW

Total Rs: 0.00
( As per rate analysis under item 91 - Note )
IRR-CAW-8-7 Providing and Constructing 45 cm thick dry rubble stone pitching

including cost of all materials,labour,hand packing,finishing etc.,complete
DATA :
A. MATERIALS :
Rate Amount
in Rs in Rs

1 Cum 49.50
Quarry
Add for seignorage Charges on UCR @Rs 0.00
0.00
B.MACHINERY :
Rate Amount
in Rs in Rs
1 Nill 0.00
0.00

0.00
Rs :
C.LABOUR :
Rate Amount
in Rs in Rs

2 Mazdoor Day 2.10
0.00
Rs :
ABSTRACT
Total Rs: 0.00
IRR-CAW-8-8 Providing and constructing 30 cm thick rubble stone pitching set in CM 1: 5 proportion with
pin headers at 2 per sqm in including cost of all materials, labour, packing chips and mortar,
finishing, curing etc., complete with initial lead upto 50 m and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
3 Stone chips @ 15 % at quarry cum 4.50
4 Cement kg 3000.00
Add seignorage charges on UCR( Included in material rate )
147
IRR-CAW
Add seignorage charges on San ( Included in material rate ) 0.00

B. MACHINERY:
in Rs. in Rs.
1 5 hp pump ( diesel ) 2.00
C. LABOUR:
in Rs. in Rs.
4 mazdoor Day 12.00
5 Catrman with double bullock cart Day 2.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-8-9 Providing and Constructing 30 cm thick rubble stone pitching set in CM 1:5 Proportion
including cost of all materials,labour, packing chips and mortar ,finishing etc.,complete
( rubble stones : 0.33 cum/sqm )
DATA :
RATE ANALYSIS UNIT : 100.00 Sqm
A. MATERIALS :
Rate Amount
in Rs in Rs

1 Cum 33.00
Quarry
2 Cement Kg 3232.00
3 Sand ( Screened) Cum 11.22
Add for seignorage Charges on UCR @Rs 0.00
Add for seignorage Charges on Sand @Rs 0.00
0.00
B.MACHINERY :
Rate Amount
in Rs in Rs
1 Nill 0.00

0.00
Rs :
C.LABOUR :
Rate Amount
in Rs in Rs

3 Mazdoor Day 2.80
0.00
Rs :
ABSTRACT
A.Cost of Materials including seigniorage charges Rs: 0.00
148
IRR-CAW

Total Rs: 0.00
IRR-CAW-8-10 Providing and constructing 30 cm thick dry khandki stone pitching using 20 to 25 cm size
khandki stones with pin headers at 2 per sqm including cost of all materials, labour, hand
packing, finishing etc., complete with initial lead upto 50 m and all lifts.
( Khandki stones 20- 25 cm height : 1200 Nos/sqm, Stone Chips : 0.045cum/sqm,
Pin Headers 30cm : 2/sqm)
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Khandki stones 20-25 cm height Nos 1200.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 6.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-8-11 Providing and constructing 45 cm thick dry khandki stone pitching using 25 to 30 cm size
khandki stones with pin headers at 2 per sqm including cost of all materials, labour, hand
packing, finishing etc., complete with initial lead upto 50 m and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
2 Pin headers 45 cm Nos 200.00
Add seignorage charges on UCR( Included in material rate )
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
149
IRR-CAW
0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 9.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-8-12 Providing and constructing 30 cm thick khandki stone pitching using 20 to 25 cm size
khandki stones with pin headers at 2 per sqm set in CM 1 : 5 proportion with pointing joints in
CM 1:3 proportion including cost of all materials, labour, packing chips and mortar, finishing,
curing etc.complete with initial lead upto 50 m and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
2 Pin headers 30 cm long Nos 200.00
4 Cement kg 2902.00
5 Sand with ( screened ) cum 9.67
Add seignorage charges for San ( Included in material rate ) 0.00
B. MACHINERY:
in Rs. in Rs.
1 5 hp diesel pump Hour 2.00
C. LABOUR:
in Rs. in Rs.
3 Cartman with double bullock cart Day 2.00
5 mazdoor Day 11.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-8-13 Providing and constructing 45 cm thick khandki stone pitching using 25 to 30 cm stones
150
IRR-CAW
with pin headers at 2 per sqm set in CM 1 : 5 proportion with pointing joints in CM 1 : 3
proportion including cost of all materials, labour, packing chips and mortar, finishing, curing
etc., complete with initial lead upto 50 m and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
2 Pin headers 45 cm Nos 200.00
4 Cement kg 4050.00
Add seignorage charges for Sto ( Included in material rate ) 0.00
Add seignorage charges for San ( Included in material rate ) 0.00
B. MACHINERY:
in Rs. in Rs.
1 5 hp diesel pump Hour 4.00
C. LABOUR:
in Rs. in Rs.
5 mazdoor Day 16.00
ABSTRACT:
Total Rs: 0.00
IRR-CAW-8-14 Providing 10 cm thick approved type grass turfing to the side slopes of canal icluding cost of
all materials, labour, watering for minimum 15 days etc.,complete with lead 50 m and all lifts.
(FA : 2 cum/sqm)
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Turfing sods sqm 100.00
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
0.00
C. LABOUR:
in Rs. in Rs.
151
IRR-CAW
3 mazdoor Day 14.00

ABSTRACT:
Total Rs: 0.00
IRR-CAW-8-15 Providing 10 cm Thick approved type gross turfing to the side slopes of canal including cost of
all materials ,labour,watering for minimum 15 days etc.,,complete.
with initial lead upto 50 m and all lifts ( WITHOUT USING SAND)
RATE ANALYSIS UNIT : 100.00

A. MATERIALS :
Rate Amount
in Rs in Rs
1 Turfing Sods Sqm 100.00

0.00
B.MACHINERY :
Rate Amount
in Rs in Rs
1 Nill 0.00
0.00
0.00
Rs :
C.LABOUR :
Rate Amount
in Rs in Rs
1 Mazdoor Day 7.00

Cart men with double bullock
2 Day 2.00
cart
0.00
Rs :
ABSTRACT
Total Rs: 0.00
Rate per sqm=(A+B+C+D) /100 0
152
IRR-CCDW
CHAPTER-IV
Standard Data
Index- code
IRR-CCDW CANAL CROSS DRAINAGE WORKS
IRR-CCDW-1 EXCAVATION & FOUNDATION TREATMENT WORKS :
IRR-CCDW-1-1 Excavation in all kinds of soil including boulders upto 0.30 m dia. for foundations of canal
cross drainage and other appurtenant structures and placing the excavated stuff neatly in
specified dump area or disposing off the same as directed etc., complete with initial lead upto
50 m and initial lift upto 3 m.
DATA: Out turn of two mazdoors assumed at 4 cum per day.

A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 6.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-CCDW-1-2 Excavation for Structures- Mechanical Means ( Data adopted from MORTH)
Earth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification,
including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing
of sides and bottom and backfilling with approved material.
Depth upto 3 m
Unit = cum
Taking output = 240 240.00 cum
cum
a) Labour
in Rs. in Rs.
1 work inspector day 0.32
2 Mazdoor day 8.00
Total in Rs. 0.00
b)Machinery
in Rs. in Rs.
1.0 Hydraulic excavator 1.0 cum bucket capacity hour 6.00
Fuel/ Energy charges hour 6.00
crew for excavator hour 6.00
Total in Rs. 0.00
Abstract
a) Labour Rs 0.00
b) Machinery Rs 0.00
c) Material Rs 0.00
Total Rs 0.00
D.Add for contractor's profit and overheads on 0.00 Rs 0.00
A+B+C
Total for 240 cum Rs 0.00
Rate per cum=(A+B+C+D) /240 Rs 0.00
IRR-CCDW-1-3 Excavation in ordnary rock without blasting including boulders above 0.3 m upto 0.60 m dia. for
foundations of canal cross drainage and other appurtenant structures and placing the
excavated stuff neatly in specified dump area or disposing off the same as directed etc.,
complete with initial lead upto 50 m and initial lift upto 3 m.
152
IRR-CCDW
DATA: Out turn of 1 crowbarman / Stone breaker, two mazdoors : 4 cum per day.

A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
4 mazdoor Day 6.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-CCDW-1-4 Excavation in ordnary rock without blasting for foundations of canal cross drainage
and other appurtenant structures and placing the excavated stuff neatly in specified dump
area or disposing off the same as directed etc., complete with initial
lead upto 50 m and initial lift upto 3 m.
( Data adopted from MORTH)
Mechanical Means
Unit = cum
Taking output = 180 180.00 cum
cum
a) Labour
in Rs. in Rs.
1 work inspector day 0.24 0.00 0.00
2 Mazdoor day 6.00 0.00 0.00
Total in Rs. 0.00
b) Machinery
in Rs. in Rs.
1.0 Hydraulic excavator 1.0 cum bucket capacity hour 6.00 0.00 0.00
Fuel/ Energy charges hour 6.00 0.00 0.00
crew for excavator hour 6.00 0.00 0.00
Total in Rs. 0.00
Abstract
a) Labour Rs 0.00
c) Material Rs 0.00
Total Rs 0.00
A+B+C
Rate per cum=(A+B+C+D) /180 Rs 0.00
IRR-CCDW-1-5 Excavation in hard rock requiring blasting including boulders above 0.6 m upto 1.2 m dia. for
excavated stuff neatly in specified dump area or disposing off the same as directed etc.,
complete with initial lead upto 50 m and initial lift upto 3 m.
DATA:
RATE ANALYSIS UNIT : 100 cum
A. MATERIALS:
in Rs. in Rs.
3 Explosive small dia ( Kelvex-220 ) kg 20.00
153
IRR-CCDW

6 Sundries LS 0.50
B. MACHINERY:
in Rs. in Rs.
1 Air compressor 8.5 cmm ( diesel ) Hour 3.00
C. LABOUR:
in Rs. in Rs.
4 Blaster Day 0.50
8 mazdoor Day 51.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
Total for 100.00 cum Rs: 0.00
IRR-CCDW-1-6 Excavation in hard rock of all toughness by blasting including boulders above 1.2 m dia. for
excavated rock neatly in specified dump area or stack yard as directed etc., complete with
initial lead upto 50 m and initial lift upto 3 m.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Explosive small dia ( Kelvex-220 ) kg 32.00
2 Ordinary detonator No. 8.00
3 Electric detonator No. 104.00
B. MACHINERY:
in Rs. in Rs.
2 Jack hammer 2 Nos Hour 16.00
C. LABOUR:
in Rs. in Rs.
3 Blaster licensed Day 1.00
8 mazdoor Day 51.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-CCDW-1-7 Excavation in hard rock with blasting prohibited for foundations of canal cross drainage
154
IRR-CCDW
and other appurtenant structures and placing the excavated rock neatly in
or stack yard as directed etc., complete with specified dump area initial lead upto 50 m and
initial lift upto 3 m.
Hard Rock ( blasting prohibited ) ( Data adopted from MORTH)
Unit = cum
Taking output = 10 cum
Mechanical Means 10.00 cum
a) Labour
in Rs. in Rs.
1 work inspector day 0.20
2 Mazdoor day 5.00
Total in Rs. 0.00
b) Machinery
in Rs. in Rs.
1.0 Air Compressor 250 cfm with 2 leads of pneumatic breaker hour 6.00
Fuel/ Energy charges hour 6.00
crew for compressor hour 6.00
Total in Rs. 0.00
Abstract
a) Labour Rs 0.00
c) Material Rs 0.00
Total Rs 0.00
A+B+C
Rate per cum=(A+B+C+D) /10 0.00
IRR-CCDW-1-8 Providing and fixing 25 mm dia 2.50 m long cold twisted deformed steel anchor rods with
1.25 m length driven into 32 mm dia hole drilled in bed rock and remaining length embedded in
concrete / masonry including cost of all materials, machinery, labour, drilling and cleaning
hole, driving anchor rod, grouting hole with thick cement slurry etc., complete with initial lead
DATA:
RATE ANALYSIS UNIT : 10.00 Nos.
A. MATERIALS:
in Rs. in Rs.
1 Cement for grouting kg 5.00
2 25 mm dia steel kg 101.00
3 Use rate of 32 mm dia drill rod Rm 12.50
B. MACHINERY:
in Rs. in Rs.
2 Jack hammer 2 Nos Hour 2.00
C. LABOUR:
in Rs. in Rs.
6 mazdoor Day 1.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
Total cost for 10.00 Nos. Rs: 0.00
IRR-CCDW-2 STEEL AND CEMENT CONCRETE WORKS :
IRR-CCDW-2-1 Providing, fabricating and placing in position reinforcement steel bars for RCC works including
cleaning, straightening, cutting, bending, hooking, lapping, welding wherever required,tying with
1.25 mm dia soft annealed steel wire, including cost of all materials, machinery, labour etc.,
complete with initial lead upto 50 and all lifts.
DATA:
155
IRR-CCDW

A. MATERIALS:
in Rs. in Rs.
3 Sundries ( chairs / spacers etc ) LS 3.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 11.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
Total cost for 1000.00 kg Rs: 0.00
IRR-CCDW-2-2 Providing, fabricating and fixing in position structural steel cutting edge consisting of 100 x
100 x 10 mm angle and 250 x 12 mm plate for sinking for sinking 4.50 m outer diameter
foundation wells foundation wells including cost of all materials, machinery, labour, bending,
welding, providing anchors etc., complete with initial lead upto 50 m and all lifts.
DATA: Consider 4.50 m outer dia. well kerb for analysis.
DETAILS OF FOUNDATION WELL CUTTING EDGE

A. MATERIALS:
in Rs. in Rs.
1 Str.Steel angle with 2.5 % wastage kg 216.10
2 Str.Steel plate with 2.5 % wastage kg 342.30
3 Steel for anchors kg 56.60
4 Acetyline gas cum 0.50
5 Oxygen gas cum 1.50
6 Welding electrodes Nos 300.00
7 Sundries LS 5.00
B. MACHINERY:
in Rs. in Rs.
3 Sundries LS 10.00
C. LABOUR:
in Rs. in Rs.
1 Str. Steel fabricator Day 2.00
2 Welder / Gas cutter Day 5.00
4 mazdoor Day 5.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
156
IRR-CCDW
Total cost for 615.00 kg Rs: 0.00

IRR-CCDW-2-3 Providing and laying insitu vibrated M-15 ( 28 days cube compressive strength not less than
aggregates for foundation filling including cost of all materials, machinery, labour, formwork,
(Cement content: 210 kg / cum with use of super plasticiser(0.4% by wt. of cement),

A. MATERIALS:
in Rs. in Rs.
1 Cement for mix kg 3990.00 0.00 0.00
Cement for incidentals @ 3 kg / cum kg 57.00 0.00 0.00
Coarse aggregate 20-10 mm cum 5.13 0.00 0.00
Coarse aggregate 10 mm below cum 3.42 0.00 0.00
3 Fine aggregate cum 7.60 0.00 0.00
4 Super Plasticizer kg 15.96 0.00 0.00
5 Use rate of shuttering for 40 uses sqm 19.00 0.00 0.00
Scaffolding @ of shuttering 10% 0.00
6 Sundries LS 0.50 0.00 0.00
Add seignorage charges on CA @ Rs: (Included in material rate) Rs: 0.00
Add seignorage charges on FA @ Rs: (Included in material rate) Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Concrete mixer 300/200 ltr ( diesel ) Hour 8.00 0.00 0.00
2 5 hp pump ( diesel ) Hour 0.50 0.00 0.00
4 Needle vibrator 40 mm dia ( petrol ) Hour 8.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
7 mazdoor
for batching materials Day 11.00 0.00 0.00
for cleaning/ washing/ curing Day 1.00 0.00 0.00
8 Labour cost for shuttering sqm 19.00 0.00 0.00
Labour cost for scaffolding @ 10% 0.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
15 N / sq mm ) grade cement concrete using 80 mm down size approved, clean, hard, graded
CA : 0.98cum, Blending Ratio of CA--35:30:20:15, FA : 0.35 cum)

For 1 cum CC :- Coarse aggregates : 0.98 cum Blending ratio : 35 :30 : 20 : 15
Fine aggregate : 0.35 cum Cement content : 210 kg Super plasticizer : 0.65 ltr
A. MATERIALS:
in Rs. in Rs.
157
IRR-CCDW

Scaffolding @ of shuttering 10%
6 Sundries LS 0.50
B. MACHINERY:
in Rs. in Rs.
1 Concrete mixer 600/400 ltr ( diesel) Hour 8.00
4 Needle vibrator 60 mm dia ( petrol) Hour 8.00
C. LABOUR:
in Rs. in Rs.
7 mazdoor
for laying Day 3.00
Labour cost for scaffolding @ 10%
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00

A. MATERIALS:
in Rs. in Rs.
6 Sundries LS 0.50
B. MACHINERY:
in Rs. in Rs.
158
IRR-CCDW

4 Needle vibrator 40 mm dia ( petrol ) Hour 8.00
C. LABOUR:
in Rs. in Rs.
7 mazdoor
for laying Day 3.00
8 for cleaning/ washing/ curing Day 1.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00

Fine aggregate : 0.35 cum Cement content :190 kg Super plasticizer : 0.76 kg
A. MATERIALS:
in Rs. in Rs.
6 Sundries LS 0.50
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
7 mazdoor
159
IRR-CCDW

for laying Day 3.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00

A. MATERIALS:
in Rs. in Rs.
6 Sundries LS 0.50
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
7 mazdoor
for laying Day 3.00
Labour cost for scaffolding @ 10% 0.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
160
IRR-CCDW
aggregates for sub-structure / super- structure works including cost of all materials,
machinery, labour, formwork, scaffolding, cleaning, batching, mixing, placing in position,
levelling, vibrating, finishing, curing etc., complete with initial lead upto 50 m and all lifts.

A. MATERIALS:
in Rs. in Rs.
6 Sundries LS 0.50
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
7 mazdoor
for laying including lifting Day 4.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00

A. MATERIALS:
in Rs. in Rs.
161
IRR-CCDW

6 Sundries LS 0.50
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
7 mazdoor
for laying Day 4.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00

A. MATERIALS:
in Rs. in Rs.
6 Sundries LS 0.50
B. MACHINERY:
in Rs. in Rs.
162
IRR-CCDW

C. LABOUR:
in Rs. in Rs.
7 mazdoor
for laying Day 4.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00

A. MATERIALS:
in Rs. in Rs.
6 Sundries LS 0.50
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
7 mazdoor
for laying Day 4.00
163
IRR-CCDW

ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
aggregates for well kerb including cost of all materials, machinery, labour, formwork,
scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing
Note: If water is to be brought from other place add only lead charges @ 500 ltr / cum. 7500

A. MATERIALS:
in Rs. in Rs.
5 Use rate of curved shutter (40 uses) sqm 82.50
6 Sundries LS 0.50
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
6 mazdoor
for laying Day 3.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
aggregates for well steining including cost of all materials, machinery, labour, formwork,
Note: If water is to be brought from other place add only lead charges @ 500 ltr / cum.
164
IRR-CCDW

A. MATERIALS:
in Rs. in Rs.
6 Sundries LS 0.50
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
6 mazdoor
for laying Day 3.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-CCDW-2-14 Providing and laying insitu M-15 ( 28 days cube compressive strength not less than 15 N / sq
mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded
aggregates for well bottom plug by tremie or skip box method including cost of all materials,
machinery, labour, batching, mixing, placing in position as per detailed specifications etc.,

For placing concrete under water by using tremie the slump of concrete shall be about 150 mm.
Minimum cement content as per IS: 456-2000 Clause-14.2.2 : 350 kg / cum.
For 1 cum CC :- Coarse aggregates : 0.80 cum Blending ratio : 65 : 35
A. MATERIALS:
in Rs. in Rs.
TOTAL Rs: 0.00
Add for tremie arrangement @ 1% Rs: 0.00
Add seignorage charges on CA @ Rs. (Included in material rate) Rs: 0.00
Add seignorage charges on FA @ Rs. (Included in material rate) Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
165
IRR-CCDW

3 Sundries( Hopper etc. ) LS 5.00
C. LABOUR:
in Rs. in Rs.
3 Fitter shuttering Day 1.00
5 mazdoor
for erecting/ dismantling tremie Day 4.00
for feeding tremie hopper Day 2.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
aggregates for well top plug including cost of all materials, machinery, labour, cleaning,
batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with

A. MATERIALS:
in Rs. in Rs.
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
6 mazdoor
for laying Day 3.00
ABSTRACT:
Total Rs: 0.00
166
IRR-CCDW

A+B+C 0% Rs: 0.00
aggregates for well cap including cost of all materials, machinery, labour, formwork,

A. MATERIALS:
in Rs. in Rs.
6 Sundries LS 0.50
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
6 mazdoor
for laying Day 3.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
aggregates for piers and abutments including cost of all materials, labour, machinery,
formwork, cleaning, batching, mixing, placing in position, levelling, vibrating, finishing, curing

A. MATERIALS:
in Rs. in Rs.
167
IRR-CCDW

6 Scaffolding @ of shuttering 30%
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
6 mazdoor
for laying Day 6.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00

Fine aggregate : 0.35 cum Cement content :190 kg Super plasticizer : 0.76 kg
A. MATERIALS:
in Rs. in Rs.
5 Use rate ofshuttering for 40 uses sqm 46.75
B. MACHINERY:
in Rs. in Rs.
168
IRR-CCDW

C. LABOUR:
in Rs. in Rs.
6 mazdoor
for laying Day 6.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00

A. MATERIALS:
in Rs. in Rs.
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
6 mazdoor
for laying Day 5.00
169
IRR-CCDW
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
aggregates for cantiliver / counterfort retaining walls including cost of all materials,

For 1 cum CC :- Coarse aggregates : 0.90 cum Blending ratio : 50 : 30 : 20
A. MATERIALS:
in Rs. in Rs.
6 Sundries LS 0.50
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
6 mazdoor
for laying Day 5.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
aggregates with placing and sinking plums of size 150 to 80 mm upto 15 percent for gravity
type retaining walls / piers / abutments etc., including cost of all materials, machinery,
labour, formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating,
finishing, curing etc.,complete with initial lead upto 50 m and all lifts.
170
IRR-CCDW
CA : 0.765cum, Blending Ratio of CA--50:30:20, FA : 0.34 cum,

plums of size 150 to 80 mm : 0.25cum )

For 1 cum plum CC :- Coarse aggregates : 0.765 cum Blending ratio : 50 :30 : 20
Plums of size 150 to 80 mm : 0.25 cum
A. MATERIALS:
in Rs. in Rs.
3 Plums of size 150 to 80 mm cum 5.00
Use rate of shuttering for 40 uses sqm 55.00
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
6 mazdoor
for laying Day 5.00
for placing plums Day 2.00
for conveying plums Day 2.00
Labour for scaffolding @ 30%
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
15 N / sq mm ) grade cement concrete using 40 mm down size approved, clean, hard,graded
aggregates for cast in-situ pipes including cost of all materials, machinery, labour, cleaning,
batching, mixing, placing in position, levelling, vibrating, finishing, curing etc., complete with

Fine aggregate : 0.40 cum Cement content : 210 kg Super plasticizer : 0.84kg
A. MATERIALS:
in Rs. in Rs.
171
IRR-CCDW

6 Sundries LS 0.50
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
6 mazdoor
for laying Day 3.00
Labour for scaffolding @ 15%
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
aggregates for cast in-situ pipes including cost of all materials, labour, machinery, formwork,

A. MATERIALS:
in Rs. in Rs.
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
172
IRR-CCDW
in Rs. in Rs.
6 mazdoor
for laying Day 3.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
aggregates for deck slab & kerb including cost of all materials,machinery, labour, formwork,
etc., complete with initial lead upto 50 m and all lifts. ( Cement content : 300 kg / cum )

A. MATERIALS:
in Rs. in Rs.
6 Sundries LS 1.00
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
6 mazdoor
for laying Day 4.00
ABSTRACT:
Total Rs: 0.00
173
IRR-CCDW

A+B+C 0% Rs: 0.00
aggregates for columns and beams including cost of all materials, labour, machinery,
formwork, scaffolding, cleaning, batching, mixing, placing in position, levelling, vibrating,
finishing, curing etc.,complete with initial lead upto 50 m and all lifts. ( Cement content : 300
kg / cum )

A. MATERIALS:
in Rs. in Rs.
6 Sundries LS 1.00
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
6 mazdoor
for laying Day 3.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-CCDW-2-26 Providing and laying insitu M- 20 ( 28 days cube compressive strength not less than 20 N /
sqmm ) grade cement concrete using 20 mm down size approved, clean, hard, graded
aggregates for wearing coat including cost of all materials, machinery, labour, formwork,
cleaning, batching, mixing, placing in position in alternate panels, levelling, compacting,
finishing, curing, packing joints with asphalt mortar etc., complete with initial lead upto 50 m
and all lifts. ( Cement content : 300 kg / cum )
Note: If water is to be brought from other place add only lead charges @ 500 ltr / cum. to the data

174
IRR-CCDW
A. MATERIALS:
in Rs. in Rs.
6 Sundries ( asphalt mortar etc ) LS 5.00
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
6 mazdoor
for laying Day 4.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
aggregates for troughs including cost of all materials, machinery, labour, formwork,
scaffolding, cleaning, batching, mixing, placing in position,levelling, vibrating, finishing, curing
etc., complete with initial lead upto 50 m and all lifts. ( Cement content : 300 kg / cum )
Note: If water is to be brought from other place add only lead charges @ 500 ltr / cum. to the data

A. MATERIALS:
in Rs. in Rs.
6 Sundries LS 0.50
B. MACHINERY:
in Rs. in Rs.
175
IRR-CCDW
3 Needle vibrator 40 mm dia ( diesel ) Hour 8.00

C. LABOUR:
in Rs. in Rs.
6 mazdoor
for laying Day 5.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-CCDW-3 FOUNDATION WELL SINKING WORKS :
Sinking RCC wells vertically for foundation of piers and abutments in all kinds of soil, sand and soft
rock by approved well sinking method including cost of all materials, machinery, labour, kent -
ledge arrangements, disposal of excavated material as directed etc., complete with lead upto 50 m
for disposal of excavated material.(diameter of well 6.00m)
IRR-CCDW-3-1
Unit = Running meter
Taking output = 1m
diameter of well = 6.00m
A Sandy Soil
(i) Depth below bed level upto 3.0m
Rate of sinking = 0.50 m /hour
a) Labour
0.12 Mate day 0.00
1.00 Sinker ( skilled) day 0.00
2.00 Sinking helper ( Semi skilled) day 0.00
sub total (a) 0.00
b) Machinery
2.00 Hire & running charges of crane with grab hour 0.00
bucket of 0.75 cum capacity and accessories.
Consumables in sinking @ 10% of (b) 0.00
sub total (b) 0.00
sub total (a+b) 0.00
D.Add for contractor's profit and overheads on A+B 0.00 0.00
Rate per metre = (a+b+c)/1 0.00

or say ( Rate upto 3.0m for 6.0 m well sinking ) 0.00
(ii) Beyond 3m and upto 10m depth

Rate of sinking = 0.33 m per hour.
a) Labour
0.15 Mate 0.00 day 0.00
1.25 Sinker ( skilled) 0.00 day 0.00
2.50 Sinking helper ( Semi skilled) 0.00 day 0.00
sub total (a) 0.00
b) Machinery
3.00 Hire & running charges of crane with grab 0.00 hour 0.00
bucket of 0.75 cum capacity and accessories.
Consumables in sinking @ 10% of (b) 0.00
sub total (b) 0.00
sub total (a+b) 0.00
D.Add for contractor's profit and overheads on A+B 0.00 0.00
Rate per metre = (a+b+c)/1 0.00

or say ( Rate for 3.0m to 10m well sinking ) 0.00
IRR-CCDW-3-2 Filling foundation wells with sand in layers of 25 to 30 cm and compacting by watering,
ramming as directed including cost of all materials, machinery, labour etc., complete with
DATA: Bulkage of 5 percent considered.

Output of 2 mazdoors per day : 7.50 cum
0.5 mazdoor for levelling and compacting works.

A. MATERIALS:
176
IRR-CCDW
in Rs. in Rs.
1 Sand unscreened cum 15.75
Add seignorage charges on Sand @ Rs: (Included in material rate) Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-CCDW-4 MASONRY WORKS :
IRR-CCDW-4-1 Providing and constructing un-coursed rubble stone masonry with approved stones in
CM 1 : 4 proportion for sub-structure portions of return walls / abutments etc., including
cost of all materials, machinery, labour, scaffolding, cleaning, packing cement mortar, wedging
stone chips, curing etc., complete with initial lead upto 50 m and all lifts.
(Cement content: 143 kg / cum of masonry, rubble stones : 0.85cum, FA : 0.40 cum,
Stone Chips : 0.15 cum)
Sand : 0.40 cum Cement : 143 kg

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 1430.00
4 Sand screened cum 4.00
Add seignorage charges on Stone@ Rs: (Included in material rate) Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
6 mazdoor
for conveying rubble stones Day 4.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
177
IRR-CCDW
IRR-CCDW-4-2 Providing and constructing un-coursed rubble stone masonry with approved stones in
CM 1 : 4 proportion for super-structure portions of return walls / abutments etc., including
cost of all materials, machinery, labour, scaffolding, cleaning, packing cement mortar, wedging
stone chips, curing etc., complete with initial lead upto 50 m and all lifts.
Stone Chips : 0.15 cum)

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 1430.00
TOTAL Rs: 0.00
Add for scaffolding @ 2.5% Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
6 mazdoor
for conveying rubble stones Day 4.00
TOTAL Rs: 0.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-CCDW-4-3 Providing and constructing coursed rubble masonry second sort in CM 1:4 proportion with
stones from approved source including cost of all materials, machinery, labour, scaffolding,
ramps, cleaning, packing mortar, wedging stone chips, finishing, curing etc., complete with
initial lead upto 50 m and initial lift upto 3m.
Stone Chips : 0.15 cum, Khandki stones 25 x 25 x 30 cm : 180 Nos, Header stones 25 x 25x 45 cm : 60 Nos)
DATA: Thickness of face stone masonry assumed : 60 cm

For 1 cum masonry :- Khandki stones 25x25x30 cm : 18 Nos. Stone chips : 0.15 cum
Header stones 25x25x45 cm size : 6 Nos. Rubble stones : 0.45 cum
Preparation of mortar : Manual

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 1330.00
2 Header stones 25x25x45 cm Nos 60.00
3 Khandki stones 25x25x30 cm Nos 180.00
178
IRR-CCDW

TOTAL Rs: 0.00
Add for scaffolding materials @ 2.5% Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
4 Stone chiseller Cl -II Day 3.00
7 mazdoor
for conveying stones / rubble Day 4.00
for preparation of mortar Day 3.00
TOTAL Rs: 0.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-CCDW-4-4 Providing and constructing coursed rubble masonry first sort in CM 1:4 proportion with
stones from approved source including cost of all materials, machinery, labour, scaffolding,
ramps, cleaning, packing mortar, wedging stone chips, finishing, curing etc., complete with
initial lead upto 50 m and initial lift upto 3 m.
Stone Chips : 0.15 cum, Khandki stones 25 x 25 x 30 cm : 18 Nos, Header stones 25 x 25x 45 cm : 6 Nos)
DATA: Thickness of face stone masonry assumed : 60 cm

For 1 cum masonry :- Khandki stones 25x25x30 cm : 18 Nos. Stone chips : 0.15 cum
Header stones 25x25x45 cm size : 6 Nos. Rubble stones : 0.45 cum
Preparation of mor : Manual

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 1330.00
2 Header stones 25x25x45 cm Nos 60.00
3 Khandki stones 25x25x30 cm Nos 180.00
TOTAL Rs: 0.00
Add for scaffolding materials @ 2.5% Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
179
IRR-CCDW

4 Stone chiseller Cl -II Day 6.00
7 mazdoor
8 for conveying rubble/ stones Day 4.00
for preparation of mortar Day 3.00
TOTAL Rs: 0.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-CCDW-4-5 Providing cement mortar pointing to coursed rubble face stone masonry in CM 1 : 2
proportion by volume including raking and cleaning joints for 50 mm depth, pressing cement
mortar into joints, cost of all materials, labour, scaffolding, finishing, curing etc., complete with

Considering 15 to 20 mm wide and 50 mm deep joints the quantity of cement mortar required
will be about 0.70 cum for 100 sqm pointing.
Quantity of morta 0.75 cum
Cement : 456 kg Sand : 0.75 cum

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 456.00
TOTAL Rs: 0.00
Add for scaffolding / ramps etc @ 2.5% Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
( Manual mixing) 0.00
C. LABOUR:
in Rs. in Rs.
1 Mason Cl- I Day 10.00
3 mazdoor Day 10.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-CCDW-4-6 Providing cement mortar pointing to coursed rubble face stone masonry in CM 1 : 3
proportion by volume including raking and cleaning joints for 50 mm depth, pressing cement
mortar into joints, cost of all materials, labour, scaffolding, finishing, curing etc., complete with

Considering 15 to 20 mm wide and 50 mm deep joints the quantity of cement mortar required
will be about 0.70 cum for 100 sqm pointing.
Quantity of mortar for 100 sqm with 10 % wastage : 0.75 cum

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 322.00
180
IRR-CCDW

TOTAL Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 10.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-CCDW-4-7 Providing 12 mm thick plastering in cement mortar 1:3 proportion by volume including cost
of all materials, machinery, labour, scaffolding, cleaning joints, smooth finishing, curing etc.,


A. MATERIALS:
in Rs. in Rs.
1 Cement kg 629.00
TOTAL Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 20.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00


A. MATERIALS:
in Rs. in Rs.
1 Cement kg 472.00
181
IRR-CCDW
TOTAL Rs: 0.00

B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 20.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00

20 mm thick plastering to be done in 2 layers of 12 mm and 8 mm .
Output of 1 mason for rough plastering : 20 sqm per day
Output of 1 mason for smooth plastering : 10 sqm per day

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 1050.00
TOTAL Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 25.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00

Quantity of morta 2.20 cum
20 mm thick plastering to be done in 2 layers of 12 mm and 8 mm .
Output of 1 mason : 20 sqm per day
Output of 1 mason : 10 sqm per day
182
IRR-CCDW

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 788.00
TOTAL Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 25.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-CCDW-5 COPING & RAILING WORKS :
IRR-CCDW-5-1 Providing and fixing 10 cm thick roughly dressed burnt stone slabs for coping set in
CM 1: 6 proportion by volume with pointing to joints in CM 1 : 3 proportion by volume including
cost of all materials, machinery, labour, finishing, curing etc., complete with initial lead upto
50 m and all lifts.
(Cement content: 7.5 kg / sqm, FA : 0.030 cum/sqm, Burnt stone slab 10 cm thick 1.05 sqm/ sqm)
DATA: Consider 10 sqm coping for analysis.

Burnt stone slab 10.50 sqm

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 75.00
3 Burnt stone slab 10 cm thick sqm 10.50
Add seignorage charges on Stone @ Rs: (Included in material rate) Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
C. LABOUR:
in Rs. in Rs.
2 Stone chiseller Cl- II Day 1.00
4 mazdoor Day 2.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-CCDW-5-2 Providing and fixing 10 cm thick one line dressed burnt stone slabs for coping set in
50 m and all lifts.
183
IRR-CCDW
(Cement content: 7.5 kg / sqm, FA : 0.030 cum/sqm, Burnt stone slab 10 cm

thick 1.05 sqm/ sqm)
Burnt stone slab 10 cm thick with 5 % wastage : 10.50 sqm

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 75.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
C. LABOUR:
in Rs. in Rs.
4 mazdoor Day 2.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-CCDW-5-3 Providing and fixing 10 cm thick two line dressed burnt stone slabs for coping set in
50 m and all lifts.
(Cement content: 7.5 kg / sqm, FA : 0.030 cum/sqm, Burnt stone slab 10 cm
thick 1.05 sqm/ sqm)
Burnt stone slab 10.50 sqm

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 75.00
B. MACHINERY:
in Rs. in Rs.
1 Nil 0.00
C. LABOUR:
in Rs. in Rs.
2 Stone chiseller Cl-I Day 8.00
4 mazdoor Day 2.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
184
IRR-CCDW
IRR-CCDW-5-4 Providing and laying insitu M-15 ( 28 days cube compressive strength not less than 15 N /
sqmm ) grade cement concrete using 20 mm down size approved clean, hard, graded
aggregates for coping slab including cost of all materials, machinery, labour, formwork,
cleaning surface, batching, mixing, placing in position, levelling, compacting, finishing, curing
etc., complete with initial lead upto 50 m and initial lift upto 3 m.

Average output of 300/200 ltr mixer : 50 x 11 x 8 / 270 say : 16 cum per day
A. MATERIALS:
in Rs. in Rs.
6 Sundries sqm 1.00
B. MACHINERY:
in Rs. in Rs.
C. LABOUR:
in Rs. in Rs.
6 mazdoor
for laying and tamping Day 3.00
7 Labour cost for shuttering/scaffolding sqm 88.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-CCDW-5-5 Providing and constructing protective railing consisting of in-situ railing posts of size 15 x
15 cm at bottom, 10 x 10 cm at top and 75 cm height at 2 m centre to centre in M-20 grade
concrete using 20 mm down size graded aggregates and with each post reinforced by 4 Nos.
of 8 mm dia main bars embedded in kerb concrete for a depth of 40 cm and 5 Nos. of 6 mm
dia. stirrups including fixing 3 rows of 40 mm dia. GI pipes with one coat of red oxide primer
and two coats of synthetic enamel paint, cost of all materials, machinery, labour, formwork,
finishing, curing etc., complete with lead upto 50 m and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Cement kg 30.00
2 20-10 mm coarse aggregate cum 0.04
3 10-4.75 mm coarse aggregate cum 0.02
5 Reinforcement steel kg 16.39
6 40 mm dia GI pipes B class Rm 30.00
8 Sundries ( paints/ binding wire etc ) LS 4.00
185
IRR-CCDW
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
0.00
C. LABOUR:
in Rs. in Rs.
4 mazdoor Day 1.50
5 Painter Cl- II Day 0.50
6 Fitter shuttering Day 0.50
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
Total cost for 10.00 Rm Rs: 0.00
IRR-CCDW-6 HUME PIPE LAYING & JOINTING WORKS :
IRR-CCDW-6-1 Laying and jointing 300 mm dia. NP- 2 class or IRC standard hume pipes in CM 1 : 2
proportion by volume including cost of all materials ( excluding pipes and collars ), machinery,
labour, aligning, packing joints with hemp, finishing, curing etc., complete with initial lead upto
50 m and all lifts.
(Cement content: 9.9 kg / joint, FA : 0.01cum/joint, Hemp Yarn : 0.091kg/joint)
DATA: Consider 10 joints for analysis.

Hemp yarn : 0.91 kg
2 Masons & 2 mazdoors considered for 10 joints.
1 mazdoor for curing @ daily 1 hour for one week.
RATE ANALYSIS UNIT : 10.00 Joint

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 99.00
3 Hemp yarn kg 0.91
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
( Manual mixing ) 0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 3.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
Total cost for 10.00 Joint Rs: 0.00
Rate per Joint=(A+B+C+D) /10 Rs: 0.00
50 m and all lifts.

Hemp yarn : 1.27 kg
186
IRR-CCDW

1 mazdoor for curing @ daily 1 hour for one week.

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 174.00
3 Hemp yarn kg 1.27
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 3.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
50 m and all lifts.

Cement : 248kg Sand : 0.25 cum
Hemp yarn : 2.20 kg
2.5 Masons & 3 mazdoors considered for 10 joints.
1mazdoor for curing @ daily 1 hour for one week.

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 248.00
3 Hemp yarn kg 2.20
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
50 m and all lifts.
187
IRR-CCDW

Hemp yarn : 2.50 kg
2.5 Masons & 3 mazdoors considered for 10 joints.

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 321.00
3 Hemp yarn kg 2.50
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
50 m and all lifts.

Hemp yarn : 3.10 kg

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 396.00
3 Hemp yarn kg 3.10
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 5.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
188
IRR-CCDW
50 m and all lifts.

Hemp yarn : 3.40 kg

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 446.00
3 Hemp yarn kg 3.40
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 5.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
50 m and all lifts.

Hemp yarn : 3.77 kg

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 495.00
3 Hemp yarn kg 3.77
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 6.00
ABSTRACT:
189
IRR-CCDW
Total Rs: 0.00

A+B+C 0% Rs: 0.00
50 m and all lifts.

Hemp yarn : 4.15 kg

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 569.00
3 Hemp yarn kg 4.15
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 6.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
50 m and all lifts.

Hemp yarn : 4.53 kg

A. MATERIALS:
in Rs. in Rs.
1 Cement kg 668.00
3 Hemp yarn kg 4.53
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 7.00
190
IRR-CCDW

ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-CCDW-7 BACK FILLING & OTHER WORKS :
IRR-CCDW-7-1 Providing rubble / boulder and sand filling behind abutment and return walls in layers
including cost of all materials, machinery, labour, watering, ramming etc., complete with initial
lead upto 50 m and initial lift upto 3 m.
DATA: Consider 10 cum rubble/ boulder and sand filling.

Quantity of rubble/ boulder : 10.00 cum
Quantity of sand : 4.00 cum
2 mazdoors for rubble filling & 2 mazdoor for packing with sand & watering.

A. MATERIALS:
in Rs. in Rs.
1 Rubble / Boulder cum 10.00
2 Sand unscreened cum 4.00
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
C. LABOUR:
in Rs. in Rs.
2 Mason Cl II Day 1.00
3 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-CCDW-7-2 Providing and filling murrum / gravely soil ( CNS soil ) for foundation or around pipes
including breaking clods, spreading in layers of 10 to 15 cm, watering, compaction by earth
masters to achieve density control of not less than 95 percent etc., complete with lead
DATA: For foundation filling in pits and around pipes requires collection and rehandling of soil.
Output of 2 mazdoors for rehandling at site per day( loose) : 6.00 cum
Output of 1 mazdoor for levelling & compaction / day ( loose ) : 12.00 cum
Cartman with double bullock cart for supplying water : 0.5 day
1mazdoor for watering and miscellaneous works at site.

A. MATERIALS:
in Rs. in Rs.
1 Murum cum 12.00
0.00
Add seignorage charges on Soil @ Rs: (Included in material rate) Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Nill 0.00
0.00
C. LABOUR:
in Rs. in Rs.
191
IRR-CCDW
3 mazdoor Day 6.00

ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-CCDW-7-3 Providing and filling murum / gravely soil ( CNS soil ) for foundation or above pipes
including breaking clods, spreading in layers of 10 to 15 cm, watering, compaction by power
roller to achieve density control of not less than 98 percent etc., complete with lead upto
50 m and all lifts.
DATA: For foundation filling in large area and above pipes no rehandling of soil is considered.
Output of 1 mazdoor for spreading & levelling at site per day : 12.00 cum
Output of 8-10 tonne road roller for compaction per hour : 58.6 cum/hour
Cartman with double bullock cart for supplying water : 0.5 day
1mazdoor for watering at site.

A. MATERIALS:
in Rs. in Rs.
1 Murum cum 12.00
0.00
Add seignorage charges on Soil @ Rs: (Included in material rate) Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Diesel road roller 8-10 tonne Hour 0.17
C. LABOUR:
in Rs. in Rs.
1 Operator road roller Hour 0.17
4 mazdoor Day 1.50
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
Rate per cum=(A+B+C+D) /10 Rate per cum Rs: 0.00
IRR-CCDW-7-4 Providing and fixing one line dressed 111x35x25 cm thick IRC standard kilometre stone in
cement concrete M-10 grade with 40 mm down size aggregates including excavating pit of
size 70x45x40 cm, embedding the stone by 30 cm in concrete, providing 2 coats synthetic
enamel paint of approved quality and colour to exposed surfaces and lettering as directed, cost
of all materials, labour, finishing, curing etc., complete with initial lead upto 50 m and all lifts.
DATA: For fixing each kilometre stone:

Quantity of excavation ( 0.70 x 0.45 x 0.40 ) : 0.13 cum
Quantity of M-10 grade concrete ( 0.13 -- 0.35x0.25x0.30 ) : 0.10 cum
Surface painting 2 coats : 2.00 sqm
RATE ANALYSIS UNIT : 4 Each

A. MATERIALS:
in Rs. in Rs.
1 One line dressed Km stone No. 4.00
6 Cement kg 100.00
7 Synthetic enamel paint I st quality ltr 1.00
8 Sundries ( brush / oil etc ) LS 4.00
B. MACHINERY:
192
IRR-CCDW
in Rs. in Rs.
1 NIL 0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 1.00
4 Painter Cl- I Day 1.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
Total cost for 4.00 Each Rs: 0.00
IRR-CCDW-7-5 Providing and fixing one line dressed 65x15x10 cm thick IRC standard hectometre stone in
cement concrete M-10 grade with 40 mm down size aggregates including excavating pit of
size 50x45x40 cm, embedding the stone by 30 cm in concrete, providing 2 coats synthetic
enamel paint of approved quality and colour to exposed surfaces and lettering as directed, cost
of all materials, labour, finishing, curing etc., complete with initial lead upto 50 m and all lifts.
DATA: For fixing each hectometre stone:

Quantity of excavation ( 0.50 x 0.45 x 0.40 ) : 0.10 cum
Quantity of M-10 grade concrete ( 0.10 -- 0.15x0.10x0.30 ) say : 0.10 cum
Surface painting 2 coats : 0.40 sqm

A. MATERIALS:
in Rs. in Rs.
1 One line dressed hectometre stone No. 4.00
6 Cement kg 100.00
7 Synthetic enamel paint I st quality ltr 0.40
8 Sundries ( brush / oil etc ) LS 1.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 1.00
4 Painter Cl- I Day 0.50
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
Total cost for 4.00 Each Rs: 0.00
Rate per Each=(A+B+C+D) /4 Rate per Each Rs: 0.00
193
IRR-GAW
CHAPTER-V
Standard Data
IRR-GAW HYDRAULIC GATES AND ALLIED EQUIPMENT
Notes
1 All materials / bought out components for embedded parts, gates, hoists and allied works
shall conform to relevant Indian standards / technical specifications and approved drawings.
2 The basic rates are EXCLUSIVEof preparation of designs / drawings / material schedules etc.,
as per specifications and other technical data including revisions.
If designs &drawings are to be done by private agency 2.% of estimated cost be added
3 The basic rates are inclusive of cost of all materials, machinery, labour, fabrication, erection,
commissioning and testing of gates, hoists and other related components as per technical
specifications.
4 The basic rates are inclusive of finishing, wastage of materials , incidental works, temperary
supports, all enabling works, profit, overheads, small tools / plants, hidden cost
on labour etc.
5 The basic rates are inclusive of taxes, duties (excise ), levies and all other incidental charges including
turn over tax/sales tax on works contract. Separate provision shall be made in the estimate towards such
tax on works contract at the rate prevailing at the time of preparation of estimate.
6 The basic rates are inclusive of all leads and lifts including rehandling.
7 No provision is made for stitch welding and it is part of welding work
8 The basic rates are inclusive of preparatory works such as rectification of damages, repairing
shop painting, cleaning, positioning and anchoring first stage embedments,
9 The basic rates are not inclusive of painting with or without sand blasting,and are to be added to the rate as
perschedule rates formulated in the same chapter as per applicability and specifications
10 The basic rates are exclusive of cost of river diversion arrangements, dewatering, desilting ,secondary concreting
of EM parts etc., which form part of civil works.
11 DESIGNS AND DRAWING CHARGES AT 2% BE ADDED EXTRA TO THE ESTIMATES, IF CONTRACTOR'S

SCOPE OF WORK INVOLVES DESIGNS COMPONENT ALSO
12 Add AREA ALLOWANCES AS APPLICABLE ON LABOUR COMPONENT ONLY

13 PAINTING CHARGES ADDED EXTRA TO THE DATA ITEMS AS PER APPLICABILITY DRAFTING FROM
ITEM-C 16 TO D- 24
14 HOIST EQUIPMENT
1. where sand blasting is not possible, hand and power tool cleaning be adopted
2. Machined surfaces should not be painted
3. for maintenance unless sand blasting is essential hand and power tool cleaning be adopted
15 PRIMAR COATS-- GATES

--Gates and stoplogs--70+/- 5 one coat of inoganiczink silicate(airless spray preferred)
--E.M. parts---70+/- 5 one coat of inoganiczink silicate(airless spray preferred)
--Lifting beams/ladders--two coats of zinc phosphate primer (airless spray preferred) 40microns/coat
FINISHING COATS--GATES
--- Gatesand stoplogs-150+/- 5 two coats(each 150) of solventless coaltar epoxy paint
-E.M. parts--150+/- 5 two coats(each 150) Two coats of solventless coaltar epoxy paint
--Lifting beams/ladders-- two coats 130 microns (each 65+/-5) of alkyd based micaccous iron oxide paint
16 Primary coats-- Hoists and supporting structure

structural components: two coats of zinc phosphate primer silicate(airless spray preferred) 40microns/coat
Machinery: one coat of zinc phosphate primer (airless spray preferred) 50microns/coat
HYDRAULIC HOIST:(exposed to water) One coat ofcoat of inoganic zink silicate (airless spray preferred)
70microns/coat
( un exposed to water) two coats of zink phosphate primer (airless spray preferred) 40microns/coat
(oil tank control cabins,hoist beams and pipe support) one coat of zink phosphate primer (airless spray
preferred) 50microns/coat
unmachined surfaces: one primer coat ofchlorinated rubber based zinc phosphate primer 50+/- microns
FINISHING COATS-- Hoists and supporting structure

structural components: one coat 65+/-5 of alkyd based micaccous iron oxide paint followed by two coats of
synthetic enamel paint 25 microns/coat
Machinery: three coats of aluminium paint orsynthetic enamel zinc phosphate primer , 25 microns/coat
HYDRAULIC HOIST:(exposed to water) two coats of solventless coal tar epoxy paint150 microns/coat
( un exposed to water)one coat 65+/-5 of alkyd based micaccous iron oxide paint followed by two coats of
synthetic enamel paint25 microns/coat
(oil tank control cabins,hoist beams and pipe support) one coat of zink phosphate primer
(airless spray preferred) 50microns/coat
Unmachined surfaces: three coats of vinyl resin/chlorinated rubber paint 30+/-5 microns
194
IRR-GAW
Index- code
IRR-GAW GATE HOIST AND ALLIED WORKS

IRR-GAW-1 RADIAL GATES
IRR-GAW-1-1 E.M Parts and anchorages

fabrication, supply, erection, testing and commissioning of
Embedded parts for radial gate consists of sill beam, wall plates, anchor girders , yoke girders ,
tie flats, trunnion supports etc., including cost of all materials, machinery, labour, welding, finishing, with
leads and lifts &all accessories
(without painting on sand-blasted or mechanical cleaning surfaces which are added extra
as perscedule of rates under itemsinthis chapter and add as applicable separately)
DATA: Consider embedded parts for radial gate for spillway opening of size 15 m x 9 m for analysis.
Size of gate for 15 x 9 m spillway opening at crest Length : 15 m Height : 9.75 m
Consider actual weight for data rate analysis. 14.4 tonnes
A. MATERIALS:
in Rs. in Rs.
1 Str steel angle / beam / channel / bars kg 700.00 0.00 0.00
2 Structural steel plate / flats kg 13700.00 0.00 0.00
3 Stainless steel plate / flats kg 200.00 0.00 0.00
4 MS bolts and nuts kg 110.00 0.00 0.00
5 Oxygen gas cum 276.00 0.00 0.00
6 Acetyline gas cum 92.00 0.00 0.00
7 Welding electrodes Nos 665.00 0.00 0.00
8 Welding electrodes ( LH ) Nos 5983.00 0.00 0.00
9 Welding electrodes ( stainless steel ) Nos 657.00 0.00 0.00
10 Use rate welding holder set Hour 780.00 0.00 0.00
11 Use rate gas cutting torch set Hour 36.00 0.00 0.00
12 Sundries LS 100.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
1 Welding transformer Hour 780.00 0.00 0.00
2 Tower crane/heavy duty tyre mounted cr Hour 4.00 0.00 0.00
3 Plate shearing machine Hour 5.00 0.00 0.00
4 Pug cutting machine Hour 149.00 0.00 0.00
5 Mobile derric crane Hour 32.00 0.00 0.00
6 Stationery derric crane Hour 64.00 0.00 0.00
7 Grinding machine Hour 16.00 0.00 0.00
8 Drilling machines Hour 16.00 0.00 0.00
9 Planing machine Hour 150.00 0.00 0.00
10 Sundries LS 100.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
1 Crew for Tower crane Hour 4.00 0.00 0.00
2 Crew for Mobile crane Hour 32.00 0.00 0.00
3 Crew for Shearing machine Hour 5.00 0.00 0.00
4 Crew for Planing machine Hour 150.00 0.00 0.00
5 Crew for Drilling machine Hour 16.00 0.00 0.00
6 Crew for Grinding machine Hour 16.00 0.00 0.00
7 Foreman Day 51.00 0.00 0.00
8 Marker / Fabricator / Erector Day 92.00 0.00 0.00
9 Gas cutter Day 24.00 0.00 0.00
10 Welder ( General ) Day 66.00 0.00 0.00
11 Welder ( X - ray ) Day 7.00 0.00 0.00
12 Khalasi Day 50.00 0.00 0.00
13 Helper fabrication / erection Day 219.00 0.00 0.00
14 Electrician Day 5.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
D.Add for excise duty 0.00% Rs: 0.00
195
IRR-GAW
(on 75 percent cost excluding cost of materials) Total Rs: 0.00

E. Add for transportation upto work site @ 0% Rs: 0.00
Total Rs: 0.00
overheads on A+B+C++E 0% Rs: 0.00
Add 2 leads
Add 1 km lead charges for fabricated
parts Rs. 0.00 per tonne 0
Unloading charges of fabricated parts

Rs 0.00 per tonne 0
Total cost for 14.334 tonne Rs: 0.00
Rate per tonne=(A+B+C+D+E+F) /14.334 Rs: 0.00
IRR-GAW-1-2 fabrication, supply, erection, testing and commissioning of radial gate consisting
of skin plate, stiffeners, horizontal girders, radial arms, trunnion assemblies, tie beam, pulley
supports, bracings, rubber seals, clamps etc., with all accessories for spillway/canals including cost
of all materials, machinery, labour, seal fixing etc., complete as per specifications and approved drawings
data Consider radial gate for spillway opening of size 15 m x 9 m for analysis.
Details of material / Gas cutting / Welding considered for rate analysis are based on radial gate
drawings for 15 m x 9 m spillway
A. MATERIALS:
in Rs. in Rs.
1 Structural steel :
Angles / beams / channels / bars kg 15806.00 0.00 0.00
Plates / flats kg 38672.00 0.00 0.00
2 Cast steel components :
Trunnion hubs / Guide rollers kg 1895.00 0.00 0.00
3 Alloy steel components :
Stainless steel plate kg 6.00 0.00 0.00
Trunnion pins kg 1098.00 0.00 0.00
4 Alluminium / Bronze alloy components :
Bush for Trunnion / Guide roller kg 1155.00 0.00 0.00
5 Bolt / Nut / Washer :
GI bolts / nuts / washers kg 78.00 0.00 0.00
MS bolts / nuts / washers kg 79.00 0.00 0.00
6 Zinc kg 140.00 0.00 0.00
7 Rubber seals :
Bottom seal Rm 15.50 0.00 0.00
Side seals ( Z - type ) Rm 25.00 0.00 0.00
8 Oxygen gas cum 657.00 0.00 0.00
10 Welding electrodes ( std ) Nos 2728.00 0.00 0.00
14 Sundries LS 1000.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
4 Bending machine Hour 238.00 0.00 0.00
5 Tower crane 5 t cpacity Hour 10.00 0.00 0.00
10 Sundries LS 1000.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
196
IRR-GAW
3 Crew for Bending machine Hour 238.00 0.00 0.00

6 Foreman Day 155.00 0.00 0.00
8 Gas cutter Day 56.00 0.00 0.00
10 Welder ( X - ray ) Day 34.00 0.00 0.00
11 Khalasi Day 250.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
D. Add for excise duty 0.00% Rs: 0.00
Total Rs: 0.00
overheads on A+B+C+E 0% Rs: 0.00
Add 2 leads

Rs 0.00 per tonne 0
Rate per tonne=(A+B+C+D+E+F) /57.457 Rs. 0.00
IRR-GAW-1-3 RADIAL GATES-ROPE DRUM HOISTS WITH HOIST BRIDGES
fabrication, supply, erection, testing and commissioning of electrically operated rope

drum hoist of adequate capacity consisting of base frames, rope drums,connecting shaft, gear
system, brake system, electric motor, wire ropes, gate position indicator, manual operation
arrangement etc., with all accessories for spillway radial gate including cost of all materials,
machinery, labour,, greasing, providing hand railing and approach staircase with gate to hoist platform,
, complete as per specifications and approved drawings
DATA: Rope drum hoist for radial gate consists of embedded parts for anchorages, hoist supporting
structure, pulley supporting structures, pulleys, drive stool, rope drums, couplings, shafts,
gears and pinions, plummer blocks, worm reducer, floating shaft, electric motor, hand operation
assembly, brake, wire rope, gate position indicator, switch box etc. with related accessories.
Consider rope drum hoist for radial gate for spillway opening of size 15 m x 9 m for analysis.
Details of material / Gas cutting / Welding considered for rate analysis are based on rope drum
hoist drawings for 15 m x 9 m spillway gate
RATE ANALYSIS UNIT : 15.440 tonne wt
A. MATERIALS: 90.00 t capacity
in Rs. in Rs.
1 Structural steel
Plates / flats kg 3632.00 0.00 0.00
Rope drums 2 Nos / Gears 4 Nos kg 3680.00 0.00 0.00
Pinions kg 218.00 0.00 0.00
Pulleys 720 PCD 6 Nos kg 1080.00 0.00 0.00
Plummer blocks / Hubs kg 322.00 0.00 0.00
3 Alloy steel components
Shafts kg 557.00 0.00 0.00
Pins kg 546.00 0.00 0.00
4 Bronze alloy components :
Bronze bearings / bush kg 144.00 0.00 0.00
5 Wire rope 36 mm dia 6/37 construction kg 448.00 0.00 0.00
6 MS Bolt / Nut / Washer kg 85.00 0.00 0.00
7 Worm reducers No. 1.00 0.00 0.00
8 Electric motor 20 hp No. 1.00 0.00 0.00
9 Floating shaft 300 mm dia kg 1000.00 0.00 0.00
10 Manual operating system No. 1.00 0.00 0.00
11 Gate position indicator No. 1.00 0.00 0.00
12 Ele-magnetic brake No. 1.00 0.00 0.00
13 Electric cable / switch / control panel etc LS 1.00 0.00 0.00
14 Oxygen gas cum 213.00 0.00 0.00
18 Grease kg 50.00 0.00 0.00
21 Sundries ( hand rail /staircase / gate etc LS 200.00 0.00 0.00
197
IRR-GAW
B. MACHINERY:
in Rs. in Rs.
2 Tower crane 5 t capacity Hour 4.00 0.00 0.00
7 Sundries LS 100.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
5 Foreman Day 35.00 0.00 0.00
6 Marker / Fabricator / Erector / Mechanic Day 58.00 0.00 0.00
7 Gas cutter Day 18.00 0.00 0.00
9 Khalasi Day 20.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
Add 2 leads

Rs 0.00 per tonne 0
Total cost for 15.440 tonne wt Rs: 0.00
Total cost for 90.00 t capacity Rs:
Rate per tonne wt=(A+B+C+D+E+F) /15.440 Rs: 0.00
Rate per tonne capacity=(A+B+C+D+E+F) /90 0.00
IRR-GAW-1-4 Walk way(cat walk)

fabrication, supply, erection and commissioning of 1 metre wide walkway connecting
spillway piers / abutments at trunnion platform level including cost of all materials,
machinery, labour, cutting, welding etc, complete as per specifications and approved drawings
DATA: walk way at trunnion level generally consists of 1 m wide structural steel bridge spanning across
piers / abutments for maintenance of gate parts at trunnion level.
Consider catwalk for a clear span of 15 m and 3 m wide piers.
Details of material / Gas cutting / Welding considered for rate analysis are based on foot bridge
drawings for 15 m x 9 m radial gate
The actual weight of walkway/ foot bridge as per data : 5.318 t
A. MATERIALS:
in Rs. in Rs.
1 Structural steel
Plates / flats kg 98.00 0.00 0.00
Chequered plates kg 856.00 0.00 0.00
2 MS bolts / nuts / washers kg 8.00 0.00 0.00
3 Oxygen gas cum 51.00 0.00 0.00
8 Sundries LS 10.00 0.00 0.00
198
IRR-GAW
B. MACHINERY:
in Rs. in Rs.
2 Tower crane Hour 1.00 0.00 0.00
7 Sundries LS 10.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
5 Foreman Day 6.00 0.00 0.00
7 Gas cutter Day 4.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
Add 2 leads

Rs 0.00 per tonne 0
Rate per Rm=(A+B+C+D+E+F) /18 Rs: 0.00
IRR-GAW-2 VERTICAL LIFT GATES-EM PARTS

IRR-GAW-2-1 Design, fabrication, supply, erection and commissioning of embedded parts consisting of
sill beam, slide tracks, seal seats, guide rails, dogging sets for storage of stoplog elements
etc., with all accessories for spillway stop log gates and other vertical lift elements including cost of all materials,
machinery, labour, etc., complete as per specifications and approved drawings
as perscedule of rates under items in this chapter and add as applicable separately)
DATA: Spillway stoplog gate embedded parts consist of sill beam, slide tracks / seal tracks and gate
guides and dogging sets for storage of elements with accessories such as first stage anchors.
Consider embedded parts for stoplog gate for spillway opening of size 15 m x 9 m for analysis.
The actual weight of embedded parts as per data sheet : 3.179 tonnes
Consider actual weight for data rate analysis.
A. MATERIALS:
in Rs. in Rs.
3 Stainless steel plate / flats kg 411.00 0.00 0.00
5 Oxygen gas cum 99.00 0.00 0.00
9 Welding electrodes ( stainless steel ) Nos 1030.00 0.00 0.00
12 Sundries LS 20.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
199
IRR-GAW

4 Planing machine Hour 135.00 0.00 0.00
9 Sundries LS 20.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
2 Crew for Planing machine Hour 135.00 0.00 0.00
5 Foreman Day 16.00 0.00 0.00
7 Gas cutter Day 8.00 0.00 0.00
9 Welder ( X - ray ) Day 3.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
Add 2 leads

Rs 0.00 per tonne 0
vertical lift gates and stop log gate elements ( SLIDING GATES)
IRR-GAW-2-2 Design, fabrication, supply, erection, testing and commissioning of vertical lift gates and
stoplog gate elements, consisting of skin plate,
horizontal and vertical girders, stiffeners, lifting pins, bronze padded slide blocks/bearings, guide shoes,
rubber seals, clamps etc., with all accessories including cost of all materials,
machinery, labour, seal fixing etc.,complete as per specifications and approved drawings
DATA: Spillway stoplog gate consists of number of vertical lift slide gate elements. Each gate element
consists of skin plate, horizontal girders, vertical end girders, stiffeners, slide blocks, gate guide
shoes, lifting pins and seals with all accessories.
Consider gate 15 m x 9 m opening for analysis.

A. MATERIALS:
in Rs. in Rs.
1 Structural steel
Plates / flats kg 71963.00 0.00 0.00
Lifting pins kg 104.00 0.00 0.00
3 Alluminium / Bronze alloy components
Bronze pads kg 48.00 0.00 0.00
4 Bolt / Nut / Washer
5 Rubber seals
Bottom seal Rm 123.00 0.00 0.00
Side seals Rm 20.00 0.00 0.00
6 Oxygen gas cum 663.00 0.00 0.00
200
IRR-GAW

12 Sundries LS 200.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
7 Sundries LS 100.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
4 Foreman Day 115.00 0.00 0.00
6 Gas cutter Day 56.00 0.00 0.00
8 Welder ( X - ray ) Day 27.00 0.00 0.00
9 Khalasi Day 50.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
STOP LOGS-automatic lifting beam

IRR-GAW-2-3 fabrication, supply, erection, testing and commissioning of automatic lifting beam
with all accessories for handling, lowering and lifting of spillway stop log gate elements
including cost of all materials, machinery, labour, cutting, aligning, welding, finishing,
etc., complete as per specifications and drawings with all leads and lifts.
DATA: Automatic lifting beam for lifting spillway stop log elements consists of fabricated beam with
lifting bracket and automatic engaging / dis-engaging type hooks for under water hooking /
de-hooking of gate element. Lifting beam is an independent attachment to moving gantry crane.

A. MATERIALS:
in Rs. in Rs.
1 Structural steel
Plates / flats kg 3389.00 0.00 0.00
Lifting pins kg 101.00 0.00 0.00
Bronze bush kg 5.00 0.00 0.00
4 Forged steel components :
Lifting hooks kg 103.00 0.00 0.00
5 MS pipe 100 mm dia kg 11.00 0.00 0.00
7 Oxygen gas cum 126.00 0.00 0.00
201
IRR-GAW

13 Sundries LS 25.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
7 Sundries LS 10.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
4 Foreman Day 10.00 0.00 0.00
6 Gas cutter Day 10.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
Add 2 leads

Rs 0.00 per tonne 0
IRR-GAW-2-4 MOVING GANTRY CRANE-CLASS II

fabrication, supply, erection, testing and commissioning of adequate capacity Class- II
type moving gantry crane consisting of rail mounted gantry frame, top platform with hand
railing, long / cross travel arrangements, rope drums, gear systems, electric motors, electro-
magnetic brake system, cabin, control panel, wire rope, ladder, motorised cable reeling drum
etc., with all accessories for operating spillway stop log gate elements and river sluice /
canal sluice emergency gates including cost of all materials, machinery, labour,
etc., complete with all leads and lifts.
DATA: Moving gantry crane consists of rail mounted gantry frame with long travel arrangement, cross
travel trolley with track arrangement mounted on gantry frame top platform, rope drum hoist
with all accessories mounted on cross travel trolley for operating stoplog gate elements.
Consider moving gantry crane for operating spillway stoplog gate element of 8.92 t weight.
The same moving gantry crane can also be used for operating river sluice emergency gate.
Therefore, the hoisting capacity of the gantry crane depends on the requirement of hoisting
capacity for spillway stoplog element or river sluice emergency gate whichever is higher.
A. MATERIALS: 25 t capacity
in Rs. in Rs.
1 Structural steel
Plates / flats kg 19700.00 0.00 0.00
Chequered plates kg 820.00 0.00 0.00
Rope drums 2 Nos kg 1320.00 0.00 0.00
Gears and pinions kg 1165.00 0.00 0.00
Wheels / Pulleys kg 2255.00 0.00 0.00
202
IRR-GAW
Plummer blocks / Couplings kg 817.00 0.00 0.00

3 Forged steel components
Hook / Shackle kg 127.00 0.00 0.00
Shafts kg 556.00 0.00 0.00
Pins kg 524.00 0.00 0.00
8 MS pipe 32 mm dia for railing Rm 50.00 0.00 0.00
9 Worm reducers Nos. 4.00 0.00 0.00
10 Electric motor 17.5 hp No. 1.00 0.00 0.00
Electric motor 5 hp Nos. 2.00 0.00 0.00
Electric motor 3 hp No. 1.00 0.00 0.00
11 Ele-magnetic / Thruster brakes Nos. 4.00 0.00 0.00
13 Oxygen gas cum 579.00 0.00 0.00
17 Grease kg 50.00 0.00 0.00
20 Sundries LS 200.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
7 Sundries LS 500.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
5 Foreman Day 74.00 0.00 0.00
7 Gas cutter Day 48.00 0.00 0.00
9 Khalasi Day 20.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
Add 2 leads

Rs 0.00 per tonne 0
25.000 t capacity Rs:
Rate per tonne capacity=(A+B+C+D+E+F) /25 Rs: 0.00
RAIL TRACK FOR GANTRY CRANE

IRR-GAW-2-5 Design, fabrication, supply, erection and commissioning of rail track using 45 kg / m standard
rails on spillway bridge for movement of gantry crane for handling and operating spillway
stoplog gate elements / river sluice / canal sluice emergency gate including cost of all materials,
203
IRR-GAW
machinery, labour, complete as per specifications

DATA: Rail track for moving gantry crane consists of 45 kg / m standard rails fixed by welding and
bolting to anchors embedded in concrete at intervals. The width of track shall be as per the
requirement of gantry long travel specifications.
Consider track length of 200 m for rate analysis.
A. MATERIALS:
in Rs. in Rs.
3 Rails kg 18450.00 0.00 0.00
5 Oxygen gas cum 201.00 0.00 0.00
10 Sundries LS 10.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
5 Sundries LS 10.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
4 Foreman Day 8.00 0.00 0.00
6 Gas cutter Day 17.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
Add 2 leads

Rs 0.00 per tonne 0
Rate per Rm=(A+B+C+D+E+F) /200 Rate per Rm Rs: 0.00
VERTICAL LIFT GATES/STOP LOGS - ROLLER MOUNTED

IRR-GAW-2-6 Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical
lift service gate consisting of skin plate, vertical and horizontal girders, wheels, stiffeners, lifting
brackets, guide rollers, ballast blocks, teflon claded rubber seals etc., with all accessories for
river sluice / canal sluice vent including cost of all materials, machinery, labour,welding ,aligning finishing
seal fixing etc.with allleads and lifts, complete as per specifications andvapproved drawings
DATA: Consider upstream seal vertical lift roller gate. The gate leaf consists of skin plate, horizontal
girders, vertical end girders, stiffeners, wheels, gate guide rollers, brackets for pulleys, seals
etc., with all accessories.
Consider river / canal sluice service gate for 2.5 m x 3 m sluice opening for analysis.
A. MATERIALS:
204
IRR-GAW
in Rs. in Rs.
1 Structural steel
Plates / flats kg 4479.00 0.00 0.00
2 Cast iron components
CI blocks for counter wt kg 4100.00 0.00 0.00
Wheel axles / Pins kg 132.00 0.00 0.00
4 Cast steel components
Wheels / Guide rollers kg 492.00 0.00 0.00
5 Alluminium / Bronze alloy components
Bearings / Bushes kg 76.00 0.00 0.00
SS bolts / nuts / washers kg 55.00 0.00 0.00
7 Rubber seals
Bottom seal ( flat uncladed ) Rm 2.80 0.00 0.00
Side seals ( bulb teflon claded ) Rm 5.85 0.00 0.00
Top seal ( bulb teflon claded ) Rm 2.25 0.00 0.00
Corner seals ( bulb teflon claded ) Nos 2.00 0.00 0.00
8 Oxygen gas cum 99.00 0.00 0.00
14 Sundries LS 50.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
3 Tower crane Hour 1.00 0.00 0.00
8 Sundries LS 25.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
5 Foreman Day 16.00 0.00 0.00
7 Gas cutter Day 8.00 0.00 0.00
9 Welder ( X - ray grade ) Day 3.00 0.00 0.00
10 Khalasi Day 10.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
Add 2 leads

Rs 0.00 per tonne 0
VERTICAL LIFT GATES-ROPE DRUM HOIST UPTO 30 TON CAP. POWER OPERATED
205
IRR-GAW
IRR-GAW-2-7 Design, fabrication, supply, erection, testing and commissioning of adequate capacity rope
drum hoist consisting of hoist platform, rope drum, gear system, electric motor, electro-
magnetic brake system, hand operation assembly, control panel, wire rope, pulleys, ladder etc.,
with all accessories for operating river sluice / canal sluice service gate including cost of
all materials, machinery, labour, , complete as per specifications and drawings with all leads and lifts
DATA: Rope drum hoist for river / canal sluice service gate consists of embedded parts for anchorage,
hoist supporting structure, pulley support, pulleys, drive stool, rope drums, shafts, couplings,
gears and pinions, plummer blocks, gear box, electric motor, hand operation assembly, brake,
wire rope, gate position indicator, switch box etc. with related accessories.
Consider rope drum hoist for river / canal sluice service gate for vent of size 2.5 m x 3 m.
A. MATERIALS: 25 t capacity
in Rs. in Rs.
1 Structural steel
Plates / flats kg 402.00 0.00 0.00
Chequered plate kg 290.00 0.00 0.00
Rope drums 2 Nos / Gears kg 1926.00 0.00 0.00
Pinions kg 79.00 0.00 0.00
Pulleys 3 Nos / Couplings 2 Nos kg 306.00 0.00 0.00
Shafts kg 346.00 0.00 0.00
Pins kg 73.00 0.00 0.00
8 Electric motor 5 hp No. 1.00 0.00 0.00
13 Oxygen gas cum 45.00 0.00 0.00
17 Grease kg 50.00 0.00 0.00
20 Sundries LS 25.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
7 Sundries LS 25.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
5 Foreman Day 15.00 0.00 0.00
7 Gas cutter Day 4.00 0.00 0.00
9 Khalasi Day 4.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
206
IRR-GAW

Total Rs: 0.00
Add 2 leads

Rs 0.00 per tonne 0
Rate per tonne wt=(A+B+C+D+E+F+leads) /6.243 Rs: 0.00
HOIST BRIDGE/ WITH TRESSELS

IRR-GAW-2-8 Design, fabrication, supply, erection and commissioning of structural steel hoist bridge
consisting of columns, beams, bracings, stiffeners, ties, chequered plate covering, hand railing,
ladder etc., with all accessories for supporting rope drum hoist for operating barrage
gates including cost of all materials, machinery, labour, welding, finishing, etc., complete
complete as per specifications and drawings with all leads and lifts
DATA: Structural steel hoist bridge for supporting rope drum hoist for operating barrage gates consists
of steel columns and beams with cross beams, ties, bracings, stiffeners, hand railing, ladder,
chequered plate covering, anchorages etc., with all accessories.
Consider hoist bridge for supporting 50 t rope drum hoist.
Consider 15 m span and 10 m over all height for bridge.
Details of material / Gas cutting / Welding considered for rate analysis are based on structural
steel bridge drawings for barrage gates
A. MATERIALS:
in Rs. in Rs.
1 Structural steel angles/ beams / channel kg 4564.00 0.00 0.00
Structural steel plates / flats kg 5567.00 0.00 0.00
2 MS pipe 32 mm dia Rm 32.00 0.00 0.00
MS pipe 25 mm dia Rm 64.00 0.00 0.00
3 Bolt / Nut / Washers kg 18.50 0.00 0.00
4 Oxygen gas cum 222.00 0.00 0.00
10 Sundries LS 50.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
5 Drilling machine Hour 8.00 0.00 0.00
7 Sundries LS 50.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
4 Foreman Day 27.00 0.00 0.00
6 Gas cutter Day 18.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
207
IRR-GAW

Total Rs: 0.00
Add 2 leads

Rs 0.00 per tonne 0
Rate per tonne=(A+B+C+D+E+F) /10.23 Rate per tonne Rs: 0.00
ROPE DRUM HOIST WITHOUT HOIST BRIDGE FOR BARRAGE GATES

IRR-GAW-2-9 Design, fabrication, supply, erection, testing and commissioning of adequate capacity rope
drum hoist consisting of rope drum, pulleys, gear system, electri c motor,
electro-magnetic brake system, manual operation assembly, position indicator, control panel,
wire rope etc., with all accessories for operating vertical lift roller gates for barrage
including cost of all materials, machinery, labour, cutting, bending, aligning, anchoring, welding,
finishing etc., complete with all leads and lifts.
DATA: Rope drum hoist for vertical lift barrage gate consists of hoist supporting frames, pulley
supports, pulleys, drive stool, rope drums, shafts, couplings, gears and pinions, plummer
blocks, gear box, electric motor, hand operation assembly, brake, wire rope, gate position
indicator, switch box etc. with related accessories.
Consider rope drum hoist for operating barrage gate for clear opening of 13.72 m x 8.26 m.
in Rs. in Rs.
1 Structural steel
Plates / flats kg 225.00 0.00 0.00
Pinions kg 98.00 0.00 0.00
Pulleys 3 Nos / Couplings 2 Nos kg 650.00 0.00 0.00
Shafts / Keys kg 350.00 0.00 0.00
Pins kg 96.00 0.00 0.00
8 Electric motor 12.5 hp No. 1.00 0.00 0.00
13 Oxygen gas cum 30.00 0.00 0.00
17 Grease kg 50.00 0.00 0.00
20 Sundries LS 25.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
7 Sundries LS 25.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
208
IRR-GAW

5 Foreman Day 13.00 0.00 0.00
7 Gas cutter Day 3.00 0.00 0.00
9 Khalasi Day 4.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
Add 2 leads

Rs 0.00 per tonne 0
SCREW GEAR HOISTS including plat form( UPTO 10 TON CAP)

IRR-GAW-2-10
Design, fabrication, supply, erection, testing and commissioning of adequate capacity screw gear
type hoist consisting of supporting structure, platform, ladder etc., with all accessories for
operating canal escape / regulator gate including cost of all materials, machinery, labour,
cutting, bending, aligning, anchoring, welding,finishing etc.,complete with all leads and lifts.
DATA: Screw type hoist for operating gate consists of supporting structure, hoist body, hoist stem,
thrust bearings, operating wheel / handle with related accessories.
Consider screw type hoist for canal escape / regulator gate for vent opening of size 2 m x 2 m.
in Rs. in Rs.
1 Structural steel
Plates / flats kg 145.00 0.00 0.00
2 Cast iron components :
Hoist body / Lock nut / Main nut kg 55.00 0.00 0.00
Hoist stem kg 75.00 0.00 0.00
Thrust bearings kg 4.00 0.00 0.00
6 Oxygen gas cum 18.00 0.00 0.00
10 Grease kg 2.00 0.00 0.00
13 Sundries LS 2.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
4 Sundries LS 2.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
209
IRR-GAW

3 Foreman Day 4.00 0.00 0.00
5 Gas cutter Day 2.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
Add 2 leads

Rs 0.00 per tonne 0
Rate per tonne weight=(A+B+C+D+E+F) /0.871 Rs: 0.00
MANUAL OPERATED ROPE DRUM HOISTS
IRR-GAW-2-11
Design, fabrication, supply, erection, testing and commissioning of adequate capacity
manually operated rope drum hoist consisting of hoist platform, rope drum, gear system,
brake system, wire rope, ladder etc., with all accessories for operating canal regulator
radial gate including cost of all materials, machinery, labour, welding, finishing, cleaning,
., complete with all leads and lifts
DATA: Rope drum hoist for radial gate consists of embedded parts for anchorage, hoist supporting
structure, pulley supporting structures, pulleys, drive stool, rope drums, couplings, shafts,
gears and pinions, plummer blocks, worm reducer, floating shaft, hand operation assembly,
brake, wire rope, gate position indicator etc. with related accessories.
Consider rope drum hoist for radial gate for canal regulator opening of size 3 m x 3.7 m.
in Rs. in Rs.
1 Structural steel
Plates / flats kg 453.00 0.00 0.00
Pinions kg 14.00 0.00 0.00
Pulleys 6 Nos kg 108.00 0.00 0.00
Plummer blocks / Couplings kg 47.00 0.00 0.00
Shafts kg 75.00 0.00 0.00
Pins kg 24.00 0.00 0.00
9 Brake No. 1.00 0.00 0.00
10 Wire rope sockets No 2.00 0.00 0.00
11 Oxygen gas cum 75.00 0.00 0.00
15 Grease kg 10.00 0.00 0.00
18 Sundries LS 25.00 0.00 0.00
B. MACHINERY:
Description Unit Quantity Rate Amount
in Rs. in Rs.
210
IRR-GAW

7 Sundries LS 25.00 0.00 0.00
C. LABOUR:
in Rs. in Rs.
4 Foreman Day 14.00 0.00 0.00
6 Gas cutter Day 6.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
Add 2 leads

Rs 0.00 per tonne 0
10.000 t capacity
Rate per tonne Rs: 0
Rate per tonne wt=(A+B+C+D+E+F) /2.804 Rs: 0
Rate per tonne capacity=(A+B+C+D+E+F) /10
IRR-GAW-3 SAND BLASTING AND PAINTING AS PER IS:14177-1994
IRR-GAW-3-1 Cleaning gates / hoists / embedded parts/lifting beams etc, to expose fresh metal surface
for painting by sand blasting method as per specifications including cost of all materials, l
abour, machinery, scaffolding, etc., complete with initial lead for sand upto 1 km and all lifts.
DATA: Consider 100 sqm area for cleaning by sand blasting:

A. MATERIALS:
in Rs. in Rs.
1 Natural river sand cum 30.00 0.00 0.00
2 Use rate of air hose Hour 8.00 0.00 0.00
3 Use rate of sand blast gun nozzle Hour 8.00 0.00 0.00
4 Sundries( Rust inhibitive, seive etc ) LS 5.00 0.00 0.00
Total 0.00
Add 10% towards scaffolding/laddor @ 0.10 0.00
Total cost of Materials 0.00
B. MACHINERY:
in Rs. in Rs.
1 Air compressor 7 cmm diesel Hour 8.00 0.00 0.00
2 Sand blasting equipment Hour 8.00 0.00 0.00
Total hire charges of Machinery 0.00
C. LABOUR:
in Rs. in Rs.
2 Crew for Sand blasting equipment Hour 8.00 0.00 0.00
3 mazdoor Day 15.00 0.00 0.00
Total cost of Labour 0.00
ABSTRACT:
211
IRR-GAW
Total Rs: 0.00

Total Rs: 0.00
Rate per sqm=(A+B+C+D+E+F) /100 Rs: 0.00
IRR-GAW-3-2 painting of embedded metal parts and all types of gates, stoplogs,etc, on sand blasted
surfaces with one coat of inorganic zinc silicate (airless spray preferred)70+/- 5
and two super coats with a total thickness of 300 microns
(each 150+/- 5) of solventless coaltar epoxy paint each coat 150 microns ( total 300 microns)
cost of all materials, labour, scaffolding etc., complete with all leads and
all lifts
DATA: Consider 100 sqm area for painting:

A. MATERIALS:
in Rs. in Rs.
1 inorganic zinc silicate lit 12.00 0.00 0
2 Solventless Coal tar epoxy paint ltr 34.00 0.00 0
3 Sundries ( brushes,ladders,platforms etc ) 2.30 0.00 0
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00 0.00 0.00
Total cost of Machinery Rs: 0.00

C. LABOUR:
in Rs. in Rs.
1 Painter Class-II Day 20.00 0.00 0.00
2 mazdoor Day 7.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
IRR-GAW-3-3
painting of Lifting beams,cat walks and other similar structures-painting hoist machinery,
on sand blasted surfaces with two coats of zinc phosphate primer (airless spray preferred)
40microns/coat and twocoats of alkyd based micaccous iro oxide paint , 65 microns/coat
all lifts

A. MATERIALS:
in Rs. in Rs.
1 zinc phosphate primer lit 22.00 0.00 0
2 alkyd based micaccous iron oxide paint ltr 20.00 0.00 0
B. MACHINERY:
in Rs. in Rs.
1 NIL
Total cost of machinery RS: 0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 5.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
212
IRR-GAW
Total Rs: 0.00

IRR-GAW-3-4 HOISTS:STRUCTURAL COMPONENTS--painting structurals on sand blasted surfaces with

two coats of zinc phosphate primer (airless spray preferred) 40microns/coat
and one coat 65+/-5 of alkyd based micaccous iron oxide paint
followed by two coats of synthetic enamel paint 25 microns/coat
. all lifts
A. MATERIALS:
in Rs. in Rs.
2 alkyd based micaccous iron oxide paint ltr 15.00 0.00 0
3 synthetic enamel paint lit 17.00 0.00 0
B. MACHINERY:
in Rs. in Rs.
1 NIL
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 8.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
IRR-GAW-3-5 HOISTS:machineryCOMPONENTS--painting hoist machinery, on sand blasted surfaces with

one coats of zinc phosphate primer (airless spray preferred) 50microns/coat
and three coats of aluminium paint or synthetic enamel , 25 microns/coat
all lifts

A. MATERIALS:
in Rs. in Rs.
2 aluminium paint or synthetic enamel per ltr 26.00 0.00 0.00
3 Sundries ( brushes,ladders,platforms etc ) 1.85 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 9.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
Rate per sqm=(A+B+C+D+E+F+) /100 Rs: 0.00
213
IRR-GAW
IRR-GAW-4 PAINTING WITHOUT SAND BLASTING
IRR-GAW-4-1 E.M Parts OF ALL TYPES OF GATES

Surface cleaning of metal surfaces by chemical cleaners and then by hand and power tool cleaners and removing dust.
After cleaning,applying primary coat with one coat of Zinc rich epoxy primer to athickness of 40 microns ,followed by
finishing coats
4 coats with coal tar epoxy with material, labour,and all accessories with all leads and lifts
DATA:
where surface cleaning by sand blasting is not feasible and based on specific
recommendations of designers, it is to adopt surface preperation done manually by hand and power tool
after cleaning by chemical treatment to remove grease, rust, scaling etc., and to form phasphate coating
to prevent further rusting, before applying primer painting.
RATE ANALYSIS UNIT : 100.000 Sqare meters

A. MATERIALS:
in Rs. in Rs.
1 Zinc rich epoxy primer ltr 11.00 0.00 0.00
2 Coal tar epoxy paint ltr 68.00 0.00 0.00
3 Rust cleaner / inhibitor ltr 13.00 0.00 0.00
4 Wire brush Nos 2.00 0.00 0.00
5 Sundries LS 2.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
nil 0.00
Total cost of Machinery 0.00
C. LABOUR:
in Rs. in Rs.
1 Helper for cleaning / painting Day 15.00 0.00 0.00
2 Painter Cl - II Day 33.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
Rate per sqm=(A+B+C+D+E+F+) /100 Rs: 0.00
ALL TYPES OF GATES

IRR-GAW-4-2 Surface cleaning of metal surfaces by chemical cleaners and then by hand and power tool cleaners and removing dust.
After cleaning,applying primary coat with one coat of Zinc rich epoxy primer to athickness of 40 microns ,followed
by finishing coats 3 coats with coal tar epoxy with material, labour,and all accessories with all leads and lifts
DATA:

A. MATERIALS:
in Rs. in Rs.
4 Wire brush Nos 2.00 0.00 0.00
5 Sundries LS 2.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
nil 0.00
C. LABOUR:
in Rs. in Rs.
2 Painter Cl - II Day 27.00 0.00 0.00
214
IRR-GAW
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
Rate per sqm=(A+B+C+D+E+F) /100 Rate per sq.meter Rs: 0.00
HOIST BRIDGES ,HOISTING EQUIPMENT AAND CRANES,Etc,

IRR-GAW-4-3
DATA: Surface cleaning of metal surfaces by chemical cleaners and then by hand and power tool cleaners and removing dust.
After cleaning,applying primary coat with two coats of Zinc chromite red oxide primer ,followed by finishing coats
3 coats with synthetic enamel paint with material, labour,and all accessories with all leads and lifts

A. MATERIALS:
in Rs. in Rs.
1 Zinc chromite red oxide primer ltr 17.00 0.00 0.00
2 synthetic enamel paint, ltr 26.00 0.00 0.00
4 Wire brush Nos 2.00 0.00 0.00
5 Sundries LS 2.00 0.00 0.00
Total cost of Materials 0.00
B. MACHINERY:
in Rs. in Rs.
nil 0 Rs 0.00
Total cost of Machinery 0.00
C. LABOUR
in Rs. in Rs.
2 Painter Cl - II Day 33.00 0.00 0.00
Total cost of Labour 0.00
ABSTRACT:
A. Cost of Materials Rs. 0.00
Total Rs: 0.00
Total Rs: 0.00
Rate per sqm=(A+B+C+D+E+F) /100 0.00
WALK WAYS( CAT WALKS), LIFTING BEAMS,etc,

IRR-GAW-4-4 Surface cleaning of metal surfaces by chemical cleaners and then by hand and power tool cleaners and removing dust.
After cleaning,applying primary coat with one coat of Zinc rich epoxy primer to athickness of 40 microns ,followed by
finishing coats 2 coats with coal tar epoxy with material, labour,and all accessories with all leads and lifts
DATA:

A. MATERIALS:
in Rs. in Rs.
4 Wire brush Nos 2.00 0.00 0.00
5 Sundries LS 2.00 0.00 0.00
B. MACHINERY:
in Rs. in Rs.
215
IRR-GAW
nil 0.00
C. LABOUR:
in Rs. in Rs.
2 Painter Cl - II Day 12.00 0.00 0.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
Rate per sqm=(A+B+C+D+E+F+leads) /100 Rs: 0.00
216
IRR-PMW
CHAPTER-VI
Standard Data
Index- code PRELIMINARY & MAINTENANCE WORKS

IRR-PMW
IRR-PMW-1 JUNGLE CLEARANCE :
IRR-PMW-1-1 Clearing thin jungle growth ( more than 50 percent open space ) including bushes upto
30 cm / parthenium and other weeds including burning or disposing off the same as directed
etc., complete.
DATA: Output of 3 mazdoors per day : 1000 sqm

A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 3.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-1-2 Clearing thick jungle growth ( less than 50 percent open space ) including bushes upto
upto 30 cm / parthenium and other weeds including burning or disposing off the same as
directed etc., complete.

A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 5.00
ABSTRACT:
216
IRR-PMW

Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-1-3 Removing stumps, tree roots, roots of bamboo clusters etc., upto 1.50 m girth including
excavation, stacking the materials neatly and levelling the surface etc., complete with initial
DATA:
A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 2.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
Total cost for 18 Each Rs: 0.00
IRR-PMW-1-4 Removing stumps, tree roots, roots of bamboo cluster etc., with girth above 1.50 m and
upto 3.0 m including excavation, stacking the materials neatly and levelling the area etc.,
DATA:
A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 2.00
ABSTRACT:
Total Rs: 0.00
217
IRR-PMW

A+B+C 0% Rs: 0.00
IRR-PMW-1-5 Removing stumps, tree roots, roots of bamboo cluster etc., with girth above 3.0 m and upto
5.0 m including excavation, stacking the materials neatly and levelling the area etc., complete
DATA:
A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-1-6 Additional rate for every 0.5 m increase in girth of tree stump / stumps of bamboo cluster
beyond 5 m.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 0.88
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
Rate per 0.5 m increase in girth per
Each=(A+B+C+D) /7 Rs: 0.00
218
IRR-PMW
IRR-PMW-1-7 Cutting and stacking bamboos excluding removing stumps and roots etc., complete with
DATA: Output of 5 mazdoor per day : 150 Nos
RATE ANALYSIS UNIT : 150 Each.
A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 5.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-1-8 Cutting and removing jauliflora bushes upto 1.5 m girth excluding removal of stumps and
including burning or disposing off the materials as directed with initial lead upto 50 m and all
lifts.
DATA: Output of 3 mazdoors per day : 100 Nos
A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 3.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-1-9 Cutting and removing jauliflora bushes above 1.5 m upto 3.0 m girth excluding removal of
219
IRR-PMW
stumps and including burning or disposing off the materials as directed with initial lead upto
50 m and all lifts.
DATA: Output of 3 mazdoors per day : 50 Nos
A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 3.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-1-10 Cutting trees above 0.3 m and upto 0.6 m girth excluding removal of stumps and including
stacking the materials neatly as directed with initial lead upto 50 m and all lifts.
DATA: Av. Diameter of tree for 0.3 to 0.6 m girth : 0.15 m

Output of 2 mazdoors for cutting trees / day : 14 Nos
1 mazdoor for cutting branches, collecting and stacking cut wood.
A. MATERIALS:
in Rs. in Rs.
1 Use rate of ropes etc LS 0.25
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 3.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
220
IRR-PMW

A. MATERIALS:
in Rs. in Rs.
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 3.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00

1mazdoor for cutting branches, collecting and stacking cut wood.
A. MATERIALS:
in Rs. in Rs.
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 3.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
221
IRR-PMW

Output of 2 mazdoors for cutting trees / day : 1 No
A. MATERIALS:
in Rs. in Rs.
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 3.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
DATA:
A. MATERIALS:
in Rs. in Rs.
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 5.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-1-15 Additional rate for cutting tree for every 0.5 m increase in girth of tree beyond 3 m.
DATA:
222
IRR-PMW
A. MATERIALS:
in Rs. in Rs.
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 1.75
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
Total cost for 0.5 m increase in girth for 1 No. Rs: 0.00
Rate per 0.5 m increase in girth per
Each=(A+B+C+D) /1 Rs: 0.00
IRR-PMW-1-16 Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with
A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 12.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-2 PRELIMINARY WORKS :
IRR-PMW-2-1 Earthwork excavation for trial pits / borrow pits and other investigation works in all kinds of
soil including boulders upto 30 cm dia and disposing off excavated soil as directed with lead
upto 10 m and lift upto 3 m.
DATA: Output of 2 mazdoors per day : 4 cum
223
IRR-PMW
A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 6.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-2-2 Earthwork excavation for trial pits / borrow pits and other investigation works in soft
rock including disposing off the excavated rock as directed with lead upto 10 m and lift
upto 3 m.
DATA: Output of 2 mazdoors per day 2.50 cum
A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 7.50
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-2-3 Conducting geophysical investigation studies by electrical resistivity method in stages of

5m for sub-surface details such as depth of formations, shear zones, classification of strata,
depth of water table etc., including cost of all materials, equipments, labour, analysing and
reporting the details of field studies conducted etc., complete excluding cost of transportation
arrangements.
DATA:
RATE ANALYSIS UNIT : 20 Stage
224
IRR-PMW
A. MATERIALS:
in Rs. in Rs.
1 Sundries ( misc. consumables ) 5.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 Electric resistivity meter Hour 8.00
Battery / charging cost etc @ 20%
C. LABOUR:
in Rs. in Rs.
1 Geophysist / Geologist Day 2.00
2 Graduate Engineer Day 1.00
3 Lab Assistant Day 1.00
4 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
Total cost for 20 Stage Rs: 0.00
Rate per stage=(A+B+C+D) /20 Rs: 0.00
IRR-PMW-2-4 Drilling 80 mm dia hole through over-burden using casing shoe bit vertical or inclined upto
10 degrees to vertical as directed including cost of all materials, machinery, labour, water
charges, reaming, collection of wash samples at suitable intervals, logging and lebelling,
supplying honne wood core box, fixing casing pipes ( excluding cost of casing pipes ) etc.,
complete for depth upto 30 m from surface.
Note: 1. For drilling through over-burden beyond 30 m from surface increase the basic rate per
Rm by 10 percent.
2. For providing HDPE or light black MS casing pipes add the cost of pipe per Rm.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Use rate of casing shoe bit Rm 3.00
2 Use rate of reamer shell Rm 3.00
3 Use rate of extension rod set 16.5 m Rm 3.00
4 Use rate of honne core box Rm 3.00
B. MACHINERY:
in Rs. in Rs.
1 Core drilling machine Hour 1.00
2 5 hp pump ( diesel ) 2 Nos. Hour 2.00
3 Sundries ( samplers etc ) LS 2.00
C. LABOUR:
in Rs. in Rs.
1 Crew for Core drilling machine Hour 1.00
3 mazdoor Day 2.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
225
IRR-PMW
IRR-PMW-2-5 Drilling 76 mm dia ( NX ) core hole in hard rock using diamond core bit vertical / inclined
upto 10 degree to vertical as directed including cost of all materials, machinery, labour, water
charges, collection of core samples, logging and lebelling, supplying honne wood core box
including cement grouting ( excluding cost of cement for grouting ) and redrilling in case of
collapse of sides etc., complete for depth upto 30 m from surface.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Use rate of diamond core bit Rm 3.00
3 Use rate of double tube core barrel Rm 3.00
B. MACHINERY:
in Rs. in Rs.
3 Sundries LS 5.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 2.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
NOTE: 1. For drilling in hard rock beyond 30 m upto 60 m from surface increase the basic rate per
Rm by 25 percent.
2. For drilling in hard rock beyond 60 m upto 90 m from surface increase the basic rate per
Rm by 40 percent.
IRR-PMW-2-6 Drilling 47 mm (BX )dia core hole in hard rock using diamond core bit vertical / inclined upto
10 degree to vertical as directed including cost of all materials, machinery, labour, water
charges,collection of core samples,logging, lebelling, supplying honne wood core box including
cement grouting ( excluding cost of cement for grouting ) and redrilling in case of collapse of
sides etc., complete for depth upto 30 m from surface.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Use rate of diamond core bit Rm 3.00
3 Use rate of double tube core barrel Rm 3.00
B. MACHINERY:
in Rs. in Rs.
3 Sundries LS 5.00
226
IRR-PMW
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 2.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
NOTE: 1. For drilling in hard rock beyond 30 m upto 60 m from surface increase the basic rate for
drilling upto 30 m from surface by 25 percent per Rm.
2. For drilling in hard rock beyond 60 m upto 90 m from surface increase the basic rate for
drilling upto 30 m from surface by 40 percent per Rm.
IRR-PMW-2-7 Providing and fixing 20 x 20 x 75 cm size roughly dressed boundary / demarcation /

chainage / arrow stones including cost of all materials, labour, engraving marks, fixing in
position, murum filling etc., complete with lead upto 50 m and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
2 Murrum cum 1.00
Add seignorage charges on stone ( Included in material cost ) Rs: 0.00
Add seignorage charges on murum ( Included in material cost ) Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 3.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-2-8 Providing and fixing 20 x 20 x 75 cm size temporary bench mark stone in CC 1 : 4 : 8

using 40 mm down size graded coarse aggregate including cost of all materials, labour,
dressing top surface, engraving BM data etc.,complete with lead upto 50 m and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
2 Cement for CC & top finishing kg 91.00
227
IRR-PMW
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
NOTE: For providing 30 cm thick compacted murum bed in B.C soil area including additional
excavation for thickness of murum bedding add per Each Rs: 3.00
IRR-PMW-2-9 Providing and fixing 20 x 20 x 75 cm size permanent bench mark stone in CC 1 :3 : 6

block of size 90 x 90 x 120 cm using 40 mm down size graded coarse aggregate and providing
35 cm thick 30 cm high UCR masonry in CM 1 : 5 proportion protective wall alround the BM
stone, including cost of all materials, labour, dressing top surface of stone, engraving BM data
on top surface, excavation, finishing, curing etc., complete with lead upto 50 m and all lifts.
DATA:
RATE ANALYSIS UNIT : 1 No.
A. MATERIALS:
in Rs. in Rs.
2 Cement kg 262.00
4 Rubble stone at quarry cum 0.25
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
4 mazdoor Day 5.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-3 MAINTENANCE WORKS :
IRR-PMW-3-1 Removing dry stone rock-toe / rivetment and filter layers below rock-toe/ rivetment including
stacking all materials separately as directed with initial lead upto 50 m and all lifts.
228
IRR-PMW
DATA:
A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 48.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-3-2 Re-constructing 60 cm thick hand packed rough stone revetment with through stones at
1.5 m c / c over a backing of 45 cm thick graded filter media consisting of sand, 10 mm and
40 mm size graded aggregates satisfying filter criteria laid in layers of 15 cm thick each using
sand from approved quarry and stones and filter aggregates obtained from revetment removed
for re-construction including cost of all machinery, labour, laying filter and stones to specified
slopes, wedging with chips, finishing etc. complete with initial lead upto 50 m and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Sand ( unscreened ) ( from quarry) cum 15.30
2 Coarse aggregate 10 mm (available) cum 15.30
3 Coarse aggr. 40-20 mm ( available) cum 15.30
4 Stone chips ( available ) cum 9.00
5 Rough stones ( available ) cum 57.60
6 Through stones ( available ) Nos 44.00
Add seignorage charges on sand @ ( Included in material rate) Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 33.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
229
IRR-PMW
IRR-PMW-3-3 Re-constructing dry rubble rock-toe and filter media for rock-toe consisting of sand 20 mm
and 80 mm size graded aggregates satisfying filter criteria laid in layers of 15 cm thick
each using sand from approved quarry and stones and filter aggregates obtained from
rock-toe removed for re-construction including cost of all machinery, labour, laying filter and
stones to specified slopes, wedging with chips, finishing etc. complete with initial lead upto
50 m and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Rubble ( available ) cum 58.20
2 Stone chips ( available ) cum 8.70
3 80-20 mm filter ( available ) cum 19.40
4 20 mm down filter ( available ) cum 12.10
5 Sand ( fresh from quarry ) cum 9.80
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 48.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-3-4 Removing and resetting disturbed Yarguntla / Shahabad / Talikot / PCC / Other types of slab
lining set in CM 1 : 3 including flush cement mortar pointing in CM 1 : 3 with lead upto 50 m
and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 6.00
4 Cartman with Bullock cart for water Day 1.00
ABSTRACT:
Total Rs: 0.00
230
IRR-PMW

A+B+C 0% Rs: 0.00
IRR-PMW-3-5 Removing and resetting disturbed dry rubble / khandki stone pitching 25 to 45 cm thick
including packing, wedging, finishing etc., complete with all leads and lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
3 mazdoor Day 6.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-3-6 Removing and refixing disturbed chainage / demarcation / hectometre / guard stones
including excavation, back filling etc., complete with all leads and lifts.
DATA: Assuming 0.75 hour for each stone and 7 hours working 9 stones can be fixed / day.
Consider 1 work inspector & 2 mazdoors for removing and refixing 18 stones / day

A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 2.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
231
IRR-PMW
IRR-PMW-3-7 Removing and refixing disturbed km stone / sign board / hecto-metre stone etc., including
excavation, back filling with available stuff after refixing, forming base platform of size 90 x 90 x
7.5 cm including watering, ramming etc complete with all leads and lifts.
DATA: Assuming 2 hours for removing and refixing each stone 4 stones can be fixed / day.
Consider 1 work inspector, 1 Mason & 2 mazdoor for refixing 8 stones / day

A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 2.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-3-8 Providing impervious hearting for breached / damaged portion of embankment with soil
from approved borrow areas in layers of 10 to 15 cm before compaction including cost of all
materials, machinery, labour, all operations such as collection of soil, sorting out, spreading
soil to specified thickness, breaking clods, sectioning, watering, compacting each layer to
density control of not less than 98 percent or as stipulated by rolling or by using mechanical
tampers etc., complete with initial lead upto 1 km and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
Add seignorage charges on soil Rs: Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
7 Sundries LS 2.00
C. LABOUR:
in Rs. in Rs.
232
IRR-PMW

8 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-3-9 Providing pervious/semi-pervious casing for breached / damaged portion of embankment

with soil from approved borrow areas in layers of 10 to 15 cm before compaction including
cost of all materials, machinery, labour, all operations such as collection of soil, sorting out,
spreading soil to specified thickness, breaking clods, sectioning, watering, compacting each
layer to density control of not less than 98 percent or as stipulated by rolling or by using
mechanical tampers etc., complete with initial lead upto 1 km and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
Add seignorage charges on soil @ Rs: Rs:
B. MACHINERY:
in Rs. in Rs.
7 Sundries LS 2.00
C. LABOUR:
in Rs. in Rs.
8 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-3-10 Providing impervious hearting for breached / damaged portion of embankment with soil
from approved dump areas in layers of 10 to 15 cm before compaction including cost of all
materials, machinery, labour, all operations such as collection of soil,sorting out, spreading soil
to specified thickness, breaking clods, sectioning, watering, compacting each layer to density
233
IRR-PMW
control of not less than 98 percent or as stipulated by rolling or by using mechanical tampers
DATA:
A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
Add seignorage charges on soil @ Rs: 13.60 / cum Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
7 Sundries LS 2.00
C. LABOUR:
in Rs. in Rs.
8 mazdoor Day 6.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-3-11 Providing pervious /semi-pervious casing for breached /damaged portion of embankment
with soil from approved dump areas in layers of 10 to 15 cm before compaction including
cost of all materials, machinery, labour, all operations such as collection of soil, sorting out,
spreading soil to specified thickness, breaking clods, sectioning, watering, compacting each
layer to density control of not less than 98 percent or as stipulated by rolling or by using
mechanical tampers etc., complete with initial lead upto 1 km and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
Add seignorage charges on soil @ Rs: Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
234
IRR-PMW

7 Sundries LS 2.00
C. LABOUR:
in Rs. in Rs.
8 mazdoor Day 6.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-3-12 Repairing rain cuts / resectioning canal slopes to required lines and grades as directed using
available soil including dressing, clod breaking, packing, tamping etc., complete with all leads
and lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 8.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-3-13 Cleaning drainage gallery, adits, instrumentation galleries etc., by scrubbing / brushing
including chiselling and removing leached lime deposit and disposing off all the waste material
out side adits in specified location etc., complete with all leads and lifts.
DATA:
RATE ANALYSIS UNIT : 100 Rm
A. MATERIALS:
in Rs. in Rs.
1 Wire brush Each 5.00
2 Coir brush Each 10.00
235
IRR-PMW
3 Sundries ( brooms, gloves etc ) LS 2.00

B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
1 Chiseller Cl II Day 2.00
2 mazdoor Day 6.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-3-14 Cleaning dam parapet inner face and top using oxalic acid and water by scrubbing / brushing
and washing to remove all surface coatings etc., complete .
DATA:
RATE ANALYSIS UNIT : 100 Rm
A. MATERIALS:
in Rs. in Rs.
1 Oxalic acid ltr 5.00
3 Coir brush Each 10.00
4 Sundries ( brooms, gloves etc ) LS 2.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
1 mazdoor Day 6.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-3-15 Cleaning gates / hoists / embedded parts for re-painting by removing rust, old paint, grease
etc., by using wire brush, scrubber, rust remover and applying a coat of rust inhibitive
compound etc., complete.
DATA:
A. MATERIALS:
in Rs. in Rs.
2 Sundries (Rust remover/ inhibitor /
sand paper etc) LS 5.00
TOTAL Rs: 0.00
Add for scaffolding / ladder etc @ 10% Rs: 0.00
236
IRR-PMW
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
1 Painter Class-II Day 5.00
2 mazdoor Day 10.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-3-16 Cleaning gates / hoists / embedded parts to expose fresh metal surface for repainting by
sand blasting method as per specifications including cost of all materials, labour, machinery,
scaffolding, applying a coat of rust inhibitive etc., complete with initial lead for sand upto
1 km and all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Natural river sand cum 30.00
3 Use rate of sand blast gun nozzle Hour 8.00
4 Sundries( Rust inhibitive, seive etc ) LS 5.00
TOTAL Rs: 0.00
Total cost of Materials . Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 Air compressor 7 cmm diesel Hour 8.00
2 Sand blasting equipment Hour 8.00
C. LABOUR:
in Rs. in Rs.
2 Crew for Sand blasting equipment Hour 8.00
3 mazdoor Day 15.00
ABSTRACT:
Total Rs: 0.00
Total Rs: 0.00
F.Add for contractor's profit and overheads on
A+B+C+D+E 0% Rs: 0.00
IRR-PMW-3-17 Providing two coats of painting to hoist supporting structures / hoists / moving gantry
cranes / railings etc., with zinc chromate alluminium primer paint of approved quality
including removing rust, cleaning surface, cost of all materials, labour, scaffolding etc.,
complete with all leads and all lifts.
DATA:
237
IRR-PMW
A. MATERIALS:
in Rs. in Rs.
1 Zinc chromate, alluminium primer ltr 17.00
2 Sundries LS 2.00
TOTAL Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 5.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-3-18 Providing two coats of painting 100 micron dry film thickness each coat to embedded parts
/ gates with cold applied coal tar epoxy paint of approved quality including removing rust,
cleaning surface, cost of all materials, labour, scaffolding etc., complete with all leads and
all lifts.
DATA:
A. MATERIALS:
in Rs. in Rs.
1 Coal tar epoxy paint ltr 34.00
2 Sundries ( rust remover / brush etc ) LS 4.00
TOTAL Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 6.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
IRR-PMW-3-19 Providing two coats of painting to hoist supporting structures / hoists / moving gantry
cranes / railings etc., with first quality synthetic enemel paint of approved colour
including cleaning surface, cost of all materials, labour, scaffolding etc., complete with
all leads and all lifts.
DATA:
238
IRR-PMW
A. MATERIALS:
in Rs. in Rs.
1 Synthetic enamel paint ( 1st quality ) ltr 17.00
2 Sundries LS 2.00
TOTAL Rs: 0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
2 mazdoor Day 5.00
ABSTRACT:
239
IRR-PMW
Total Rs: 0.00

A+B+C 0% Rs: 0.00
IRR-PMW-3-20 Excavation and removal of silt and silt mixed with sand from canal bed in dry condition
including disposing off the same in spoil bank or on the canal embankment in layers as
directed etc., complete with initial lead upto 50 m and all lifts.
DATA: Output of 2 mazdoors assumed at 5 cum per day.

A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
1 mazdoor Day 4.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
240
IRR-PMW
IRR-PMW-3-21 Excavation and removal of silt or silt mixed with sand in slussy condition from canal bed
including disposing off the same in spoil bank or on the canal embankment in layers as
directed etc., complete with initial lead upto 50 m and all lifts.
DATA: Excavated silt in slussy condition can be disposed off in single operation without heaping silt in
mortar pans or by collecting and rehandling after draining out water.
Output of 3 mazdoors assumed at 6 cum per day.

A. MATERIALS:
in Rs. in Rs.
1 NIL 0.00
0.00
B. MACHINERY:
in Rs. in Rs.
1 NIL 0.00
0.00
C. LABOUR:
in Rs. in Rs.
1 mazdoor Day 6.00
ABSTRACT:
Total Rs: 0.00
A+B+C 0% Rs: 0.00
241
COM-LDLFT
SCHEDULE OF RATES
Index- code (Common to all Departments)
COM-MWRK A. Manual Works

New extra items-- common item for all earth works using only manual labour
for all other works without involving contractors
COM-MWRK-1 (Manual)Excavation in all kinds of soil including boulders upto 0.30 m dia. for
foundations of canal cross drainage and other appurtenant structures
and placing excavated stuff neatly in specified dump area or disposing
off the same as directed etc., complete with initial lead upto 10 m and cum
initial lift upto 1.5 m. (WIthout involving the contractors for specified works )
With 3 Cum per day output
COM-MWRK-2 (Manual)Excavation in all kinds of soil including boulders upto 0.30 m dia. for
With 2.5 Cum per day output
COM-MWRK-3 (Manual)Excavation in soft rock without blasting, including boulders upto 0.30 m dia. for
Soft rock 1.33 Cum/Day
COM-MWRK-4 (Manual)Excavation in hard rock, including boulders upto 0.30 m dia. for
Hard rock 0.67Cum/ day
241
COM-LDLFT
COM-LDLFT B. LEAD/LIFT/LOADING & UNLOADING CHARGES
NOTES
1. For total lead upto 150 m ( including initial lead ) lead charges by head load only shall be
adopted irrespective of mode of conveyance.
2. For total lead exceeding 150 m conveyance by mechanical means only shall be adopted
irrespective of mode of conveyance.
3. The rates for loading at quarry including idle hire charges of trucks and hire charges per for
each kilometer and upto 5 km are cumulative and inclusive of total charges for preceding lead.
4. Unless otherwise specified lead charges for Earth / Sand / Gravel / Aggregates and Stones
are for loose volume and not for compacted or in-situ volume.
5. The rates for lift charges,lead charges, hire cahrges are cumulative and inclusive of
rates for preceding lift,lead and hire cahrges
6. Lift charges are not payable where conveyance of materials is by mechanical means to
final placing point.
7. Loading and unloading charges are not payable for conveyance by head load.
8. Loading charges are not payable for conveyance by mechanical means for disposal of
excavated materials, unless specified.
9. Loading and unloading charges are not payable for conveyance by mechanical means for
disposal of excavated materials beyond initial lead of 1 km wherever specified.
10. The rates for unloading of materials except earth, sand, gravel, coarse aggregate, rubble,
size stone and cut stone are inclusive of stacking.
11. Hire charges are per 1 Km for tippers and trucks for tranport of materials from work site to dump
yard and other places are cumulative& includes previous km upto 5 kms
ABSTRACT
COM-LDLFT-1 A. (Lead) Conveyance Charges for materials by head load
Earth / Sand Cement / PCC slab/

/Gravel / Murrum/ Reinforce-ment Shahbad slab / CC
Lime/ Surki/ Size steel Str steel block/ BS slab/
stone / Cut stone Rs / tonne Late-rite / Wood
Sl No.
Rubble / Coarse Rs / cum
Total distance aggregate
( Total lead includes
initial lead )
1 2 3 4 5
Total lead upto 50 m (covered

1 by item rate) initial lead initial lead initial lead
2 Total lead upto 100 m 0.00 0.00 0.00
3 Total lead upto 150 m 0.00 0.00 0.00
Notes: 1. No loading or unloading charges are admissible for conveyance by head load.
2. For total lead exceeding 150 m conveyance charges by mechanical means only shall
be adopted irrespective of mode of conveyance.
COM-LDLFT-2 B.( Lead) Conveyance charges for machinery per kilometer for transporting materials by tippers and trucks
excluding loading, unloading and hire charges of machinery.
FOR THE YEAR:
( No loading and unloading charges allowed for machinery loading and unloading )
(Lead)
charges for
trucks and
tippers per
cu.meter
for PCC
(Lead) charges for (Lead) charges for (Lead) charges for slabs/
trucks and tippers trucks and tippers trucks and tippers Shahabad
for Earth / Sand for Rubble/Size for Cement/ Steel/ slabs/ CC &
/Gravel / Murrum/ stones/ Cut Stones/ RCC poles/ AC & Laterite
Lime/ Surki/ per Coarse aggregate GI sheets/ Packed blocks/
Sl No. Distance cu.meter per cu.meter materials/tonne Wood/ cum
1 2 3 4 5 6
1 Lead upto 1 km 0.00 0.00 0.00 0.00
2 Lead upto 2 km 0.00 0.00 0.00 0.00
3 Lead upto 3 km 0.00 0.00 0.00 0.00
4 Lead upto 4 km 0.00 0.00 0.00 0.00
242
COM-LDLFT
5 Lead upto 5 km 0.00 0.00 0.00 0.00
for Every km beyond 5 km

6 upto 30 km 0.00 0.00 0.00 0.00
7 for Every km beyond 30 km 0.00 0.00 0.00 0.00
COM-LDLFT-3 C. LOADING AND UNLOADING CHARGES BY MANUAL MEANS (idle hire charges of trucks are not added)
Earth / Sand /Gravel Rubble/ size stone/

Murrum/ / Surki/ cut stone/ Coarse
aggregate,Lime in steel in
Sl No. Description of item Rs / cum Rs/cum cement in Rs/tonne Rs./tonne
1 2 3 4 5 6
1 Loading 0.00 0.00 0.00 0.00
2 Unloading 0.00 0.00 0.00 0.00
COM-LDLFT-4 D. LOADING AND UNLOADING CHARGES BY MANUAL MEANS (including idle hire charges of trucks )

aggregate,Lime in steel in
Sl No. Description of item Rs / cum Rs/cum cement in Rs/tonne Rs./tonne
1 2 3 4 5 6
1 Loading 0.00 0.00 0.00 0.00
2 Unloading 0.00 0.00 0.00 0
COM-LDLFT-5 E. LOADING AND UNLOADING CHARGES BY MECHANICAL MEANS (including idle hire charges of trucks)

aggregate,Lime in
Sl No. Description of item Rs / cum Rs/cum
1 2 3 4
1 Loading 0.00 0.00
2 Unloading 0.00 0.00
COM-LDLFT-6 F. LIFT CHARGES FOR MATERIALS BY HEAD LOAD
Earth / Sand /Gravel PCC slab/

Murrum/ Lime/ Surki/ Shahbad
Size stone / Cut Cement / slab / CC
stone Reinforce- block/ BS
Rubble / Coarse ment steel slab / Laterite
Total lift aggregate Str steel / Wood
Sl No. ( Total lift includes initial lift ) Rs / cum Rs / tonne Rs / cum
1 2 3 4 5
Total lift upto 3 m (covered by
1 item rate) Initial lift Initial lift Initial lift
2 For Every 1.00m Lift beyond 0.00 0.00 0.00
initial lift of 3 meters
COM-DTL-LDLFT DETAILED DATA
LEAD / LIFT / LOADING & UNLOADING CHARGES - DATA

I. GENERAL DATA FOR LEAD / LIFT / LOADING & UNLOADING:
DATA FOR LEAD CHARGES BY HEAD LOAD :
For the purpose of working out conveyance charges by head load the category of materials as
classified in ( I ) above are grouped together as under :
CATEGORY : Earth / Sand / Gravel / Murrum / Lime / Surki / Coarse aggregate /
Rubble stone / Size stone / Cut stone
In this group materials which are comperatively lighter and generally conveyed by head load
by light / heavy mazdoor are included. Method of conveyance, approximate weight per load
and time required to cover specified additional distance will be generally same
Therefore common data is considered for conveyance by head load for materials under this category.
CATEGORY : Cement in bag / Reinforcement steel / Structural steel sections

In this group the materials in packed / rolled / fabricated condition which are heavier per load
compared to the materials under Category above and which can not be split into small
243
COM-LDLFT
quantities for the purpose of conveyance are included. The unit of measurement for these
materials is per tonne.
CATEGORY : PCC slab / Shahabad stone slab / CC block / Laterite stone / BS slab / Wood
In this group the materials in moulded condition / cut to standard size which are heavier per
load compared to materials under Category above are included.
COM-DTL-LDLFT-I A. (Lead) Conveyance Charges for materials by head load
CATEGORY : Earth / Sand / Gravel / Murrum / Lime / Surki / Coarse aggregate / Rubble stone
/ Size stone / Cut stone
Lead: Upto 50 m :
This is initial lead and cost is covered under item basic rate.
Lead: Upto 100 m :

Average distance to be covered beyond initial lead of 50 m 25 m
Average speed of conveyance by head load 60 m / minute
Round trip cycle time for 25 m considering 50 min/ hr working
( 2 x 25 x 60 / 50 / 60 ) 1 min
No. of trips per day for additional lead ( 8 x 60 / 1 ) 480
Quantity of material by head load per load 0.015 cum
Quantity of material by head load per day ( 480 x 0.015 ) say 7 cum
Deploy one mazdoor for every 50 m additional lead beyond initial lead.
Unit: 7 cum
Rate Amount in
Sl No. Description Unit Quantity in Rs. Rs.
A Mazdoor Day 1 0 0
Total Rs: 0
contractor's profit and
B overhead charges 0% 0
Rate per/CUM=A+B/7 cum Rs:
Lead: Upto 150 m :

Unit: 7 cum
Rate Amount in
Sl No. Description Unit Quantity in Rs. Rs.
A Mazdoor Day 2 0.00 0
Total Rs: 0
B overhead charges 0% 0
Rate per/CUM=A+B/7 cum Rs:
CATEGORY : Cement in bag / Reinforcement steel / Structural steel sections

Lead: Upto 50 m :
Lead: Upto 100 m :

( 2 x 25 x 60 / 50 / 30 ) 2 min
No. of trips per day for lead upto 100 m ( 8 x 60 / 2 ) 240
Quantity of material by head load per load 50 kg
Quantity of material by head load per day ( 240 x 50 / 1000 ) 12 tonne
Unit: 12 tonne
Amount in
Sl No. Description Unit Quantity Rate in Rs. Rs.
A Cement /steel handling Day 1
mazdoor Total Rs:
Contractor's profit and
B. overhead charges 0%
Rate per/Ton=A+B/12 tonne
Lead: Upto 150 m :

Average distance to be covered beyond initial of 50 m : 50 m
Deploy two mazdoors for conveyance beyond initial lead.
Unit: 12 tonne
Amount in
A Cement /steel handling Day 2
mazdoor Total Rs:
244
COM-LDLFT

B. overhead charges 0%
Rate per/Ton=A+B/12 tonne
CATEGORY : PCC slab / Shahabad stone slab / CC block / Laterite stone / BS slab / Wood
Lead: Upto 50 m :
Lead: Upto 100 m :

( 2 x 25 x 60 / 50 / 40 ) 1.5 min
No. of trips per day for lead upto 100 m ( 8 x 60 / 1.5 ) 320
Quantity of material by head load per load 0.017 cum
Quantity of material by head load per day ( 320 x 0.017 ) say 5.5 cum
Unit: 5.5 cum
Amount in
1 Mazdoor Day 1 0 0
Total Rs: 0
Contractor's profit and overhead charges 18% 0
Total for materials under this Category f 5.5 cum Rs: 0
Rate per cum Rs: 0
Lead: Upto 150 m :

Average distance to be covered beyond initial of 50 m : 50 m
Deploy two mazdoors for conveyance beyond initial lead.
Unit: 5.5 cum
Amount in
1 Heavy mazdoor Day 2 0 0
Total Rs: 0
Total for materials under this Category f 5.5 cum Rs: 0
Rate per cum Rs: 0
COM-DTL-LDLFT-II B.( Lead) Conveyance charges for machinery per kilometer for transporting materials by tippers and trucks
excluding loading, unloading and hire charges of machinery.
CATEGORY : Earth / Sand / Gravel / Murrum / Lime / Surki /
For total lead upto 1 km Unit: 5 cum

Amount in
1 Tipper hire charges Hour 0.15 0.00 0
Fuel charges Hour 0.15 0.00 0
2 Crew charges Hour 0.15 0.00 0
Total Rs: 0
Total for 5 cum Rs: 0
Rate per cum 0
For total lead more than 1 km upto 2 km Unit: 5 cum

Amount in
Total Rs: 0
Rate per cum 0

Amount
Sl No. Description Unit Quantity Rate in Rs. in Rs.
Total Rs: 0
245
COM-LDLFT
Rate per cum 0

Rate Amount
Sl No. Description Unit Quantity in Rs. in Rs.
Total Rs: 0
Rate per cum 0

Rate Amount
Total Rs: 0
Rate per cum 0
For lead beyond 5 km upto 30 km for every km Unit: 5 cum

Rate Amount
Total Rs: 0
Rate per cum 0
For lead beyond 30 km for every km Unit: 5 cum

Rate Amount
Total Rs: 0
Rate per cum 0
CATEGORY : Coarse aggregate / Rubble stone / Size stone / Cut stone
For total lead upto 1 km Unit: 5 cum

Rate Amount
1 Truck hire charges Hour 0.15 0.00 0
Total Rs: 0
Rate per cum 0

Rate Amount
Total Rs: 0
Rate per cum 0

Rate Amount
246
COM-LDLFT
Total Rs: 0
Rate per cum 0

Rate Amount
Total Rs: 0
Rate per cum 0

Rate Amount
Total Rs: 0.00 0
Rate per cum 0
For lead beyond 5 km upto 30 km for every km Unit: 5 cum

Rate Amount
Total Rs: 0
Rate per cum 0
For lead beyond 30 km for every km Unit: 5 cum

Rate Amount
Total Rs: 0
Rate per cum 0
CATEGORY : Cement/ Steel/ Pipes/ RCC poles/ AC & GI sheets/ Packed materials
For total lead upto 1 km Unit: 8 tonne

Rate Amount
Total Rs: 0
Total for 8 tonne Rs: 0
Rate per tonne 0
For total lead more than 1 km upto 2 km Unit: 8 tonne

Rate Amount
Total Rs: 0
Rate per tonne 0
247
COM-LDLFT
Rate Amount
Total Rs: 0
Rate per tonne 0

Rate Amount
Total Rs: 0
Rate per tonne 0

Rate Amount
Total Rs: 0
Rate per tonne 0
For lead beyond 5 km upto 30 km for every km Unit: 8 tonne

Rate Amount
Total Rs: 0
Rate per tonne 0
For lead beyond 30 km for every km Unit: 8 tonne

Rate Amount
Total Rs: 0
Rate per tonne 0
CATEGORY : PCC slabs/ Shahabad slabs/ BS slabs/ CC & Laterite blocks/ Wood
For total lead upto 1 km Unit: 3.4 cum

Rate Amount
Total Rs: 0
Total for 3.4 cum Rs: 0
Rate per cum 0
For total lead more than 1 km upto 2 km Unit: 3.4 cum

Rate Amount
Total Rs: 0
248
COM-LDLFT
Rate per cum 0

Rate Amount
Total Rs: 0
Rate per cum 0

Rate Amount
Total Rs: 0
Rate per cum 0

Rate Amount
Total Rs: 0
Rate per cum 0
For lead beyond 5 km upto 30 km for every km Unit: 3.4 cum

Rate Amount
Total Rs: 0
Rate per cum 0
For lead beyond 30 km for every km Unit: 3.4 cum

Rate Amount
Total Rs: 0
Rate per cum 0
CATEGORY : water
For total lead upto 1 km Unit: 8000 litres

Rate Amount
1 Water tanker hire charges Hour 0.15 0.00 0
Total Rs: 0
Total for 8000 litres Rs: 0
Rate per 1000 litres 0
For total lead more than 1 km upto 2 km Unit: 8000 litres

Rate Amount
249
COM-LDLFT
Total Rs: 0

Rate Amount
Total Rs: 0

Rate Amount
Total Rs: 0

Rate Amount
Total Rs: 0
For lead beyond 5 km upto 30 km for every km Unit: 8000 litres

Rate Amount
Total Rs: 0
For lead beyond 30 km for every km Unit: 8000 litres

Rate Amount
Total Rs: 0
COM-DTL-LDLFT-III C. LOADING AND UNLOADING CHARGES BY MANUAL MEANS (idle hire charges of trucks are not added)
MORD -data
1 Loading of Lime, Aggregate, Stone Boulder,
a) Loading Brick Aggregate, Kankar, Building Rubbish, Unit Quantity Rate Rs.
Building Rubbish, Crushed Slag, Stone for Masonry
Work by manual means including a lead upto 30 m
Unit = cum
Taking output = 5.5 cum
Labour
Head Mazdoor day 0.02 0
Mazdoor day 0.5 0
Total in Rs.
overhead charges 0%
Rate per cum = Rs.
250
COM-LDLFT
b) Unloading 50% of the loading charges i.e., 0.00
2 Loading of Earth, Sand, Moorum, Manure, Flyash Unit Quantity Rate Rs.
a) Loading by manual means including a lead upto 30 m
Unit = cum
Labour
Mazdoor day 0.25 0
Total in Rs.
overhead charges 0%
Rate per cum = Rs.
b) Unloading 50% of the loading charges i.e., 0.00
3 Loading of Bricks by manual means Unit Quantity Rate Rs.

a) Loading including a lead upto 30 m
Unit = 1000 Nos.
Taking output = 2000 Nos
a) Labour
Mazdoor day 0.25 0
Cost for 2000 Nos. =
overhead charges 0%
Rate per cum = Rs.
100% of loading charges i.e.,

b) Unloading +Rs. 0.00
4 Loading of Cement by manual means Unit Quantity Rate Rs.

Unit = 1 t
Taking output = 10 t
a) Labour
Head mazdoor day 0.06 0
Mazdoor day 1.5 0
Cost for 10 t =
overhead charges 0%
Rate per 1 tonne = Rs.
b) Unloading +100% of loading charges I.e., R0.00
5 Loading of Structural Steel, Steel Bars by manual means Unit Quantity Rate Rs.
Unit = 1 t
a) Labour
head Mazdoor day 0.07 0
Mazdoor day 1.8 0
Cost for 10 t =
overhead charges 0%
b) Unloading +100% of loading charges I.e., R0.00
COM-DTL-LDLFT-IV D. LOADING AND UNLOADING CHARGES BY MANUAL MEANS (including idle hire charges of trucks )

a) Loading Brick Aggregate, Kankar, Building Rubbish,
Building Rubbish, Crushed Slag, Stone for Masonry Unit Quantity Rate Rs.
Work by manual means including a lead upto 30 m
Unit = cum
a) Labour
Mazdoor day 0.5 0
b) Machinery
Truck 10t hour 0.5 0.00
Cost for 5.5 cum =
251
COM-LDLFT

overhead charges 0%
Rate per cum = Rs.
b) Unloading 50% of the loading charges i.e., 0
2 Loading of Earth, Sand, Moorum, Manure, Flyash Unit Quantity Rate Rs.
a) Loading by manual means including a lead upto 30 m
Unit = cum
Labour
Mazdoor day 0.25 0
b) Machinery
Cost for 5.5 cum =
overhead charges 0%
Rate per cum = Rs.
b) Unloading Unloading of Earth, Sand, Moorum, Manure, Flyash Unit Quantity Rate Rs.
by manual means including a lead upto 30 m
Unit = cum
a) Labour
Mate day 0.005 0
Mazdoor(unskilled) day 0.125 0
b) Machinery
Cost for 5.5 cum =
overhead charges 0%
Rate per cum = Rs.
3 Loading of Bricks by manual means Unit Quantity Rate Rs.

Unit = 1000 Nos.
Taking output = 2000 Nos
a) Labour
Mate day 0.01 0.00
b) Machinery
Cost for 2000 Nos. =
overhead charges 0%
Rate per 1000 bricks = Rs.
b) Unloading +100% of loading charges i.e., R0
4 Loading of Cement by manual means Unit Quantity Rate Rs.

Unit = 1 t
a) Labour
Mate day 0.06 0
b) Machinery
Truck 10t hour 1 0.00
Cost for 10 t =
Contractor's profit and overhe 0%
5 Loading of Structural Steel, Steel Bars by manual means Unit Quantity Rate Rs.
Unit = 1 t
a) Labour
Mate day 0.07 0
b) Machinery
Truck 10t hour 1 0.00
252
COM-LDLFT
Cost for 10 t =
overhead charges 0%
COM-DTL-LDLFT-V E. LOADING AND UNLOADING CHARGES BY MECHANICAL MEANS (including idle hire charges of trucks)

a) Loading Brick Aggregate, Kankar, Building Rubbish,
Crushed Slag, Stone for Masonry work by
mechanical means including a lead upto 30 m Unit Quantity Rate Rs.
Placing tipper at loading point, loading with front end
loader excluding time for haulage and return trip.
Unit = cum
Time required for
i) Positioning of tipper at loading point Min 1
ii) Loading by front end loader 1 cum bucket capacity Min 7.33
@ 45 / 25 cum per hour
iii) Manoevouring, reversing, dumping and turning Min -
for return
iv) Waiting time, unforeseen contingencies, etc. Min 2
Total Min 10.33
a) Machinery
Tipper 10 t capacity hour 0.172 0.00
Front end-loader 1 cum bucket capacity @ 45 cum hour 0.122 0.00
per hour
Cost for 5.5 cum =
b) Contractor's profit and
overhead charges 0%
Rate per cum = (a+b)/5.5 Rs.
b) Unloading see below. 2-B
2 Loading of Earth, sand, Moorum, Manure, Flyash,

a) Loading by mechanical means including a lead upto 30 m
Placing tipper at loading point, loading with front
end loader excluding time for haulage and return trip. Unit Quantity Rate Rs.
Placing tipper at loading point, loading with front
end loader excluding time for haulage and return trip.
Unit = cum
Time required for
ii) Loading by front end loader 1 cum bucket capacity Min 3.3
iii) Waiting time, unforeseen contingencies, etc. Min 2
Total Min 6.3
a) Machinery
Front end-loader 1 cum bucket capacity @ 45 cum hour 0.055 0.00
per hour
Cost for 5.5 cum =
overhead charges 0%
b) Unloading Unloading of Earth, sand, Moorum, Manure, Flyash,

lime, Aggregate, Stone boulder, Brick aggregate,
Kankar, Building rubbish, Manure, Crushed Slag, Unit Quantity Rate Rs.
Flyash, Stone for Masonry work by mechanical
means including a lead upto 30 m
Placing tipper at unloading point, excluding time
for haulage and return trip.
Time required for
ii) Loading by front end loader 1 cum bucket capacity Min 2
iii) Waiting time, unforeseen contingencies, etc. Min 2
Total 5
a) Machinery
253
COM-LDLFT
Cost for 5.5 cum =
overhead charges 0%
COM-DTL-LDLFT-VI F. LIFT CHARGES FOR MATERIALS BY HEAD LOAD
FOR CATEGORY : Earth / Sand / Gravel / Murrum / Lime / Surki / Coarse aggregate /
Rubble stone / Size stone / Cut stone
Lift : Upto 3.00 m

This is the initial lift and forms integral part of the activities in the basic rate of work item.
Lift charges are admissible only lifting effort beyond initial lift specified in the work item.
Lift : ADDITIONAL LIFT CHARGES FOR each 1 METER LIFT BEYOND 3 M INITIAL LIFT
For additional lift of 1m beyond initial lift of 3 m

one meter lift is taken equivalent to 6 meters lead
average speed of conveyance by head load 60 m/minute
Round trip cycle time for 1.00 m considering 50 min/ hr working
1 x6x 60 / 50 / 60 ) 0.12 min
No. of trips per day for lift 1.0 m above 3 m ( 8 x 60 / 0..12) 4000
Quantity of material by head load 0.015 cum
Quantity of material by head load per day ( 4000x 0.015 ) 60 cum
Deploy 1 mazdoor for every additional lift of 1.0 m beyond initial lift.
Lift : Upto 3.00 m for materials under this Category Unit: 60 cum
Rate Amount
1 2 3 4 5 6
Mazdoor Day 1.00 0.00 0.00
overhead charges 0% 0.00
Total Rs: for 60 cum 0.00

Rate per cum 0.00
FOR CATEGORY: Cement bag / Reinforcement steel / Structural steel sections

Lift : Upto 3.00 m
Lift : ADDITIONAL LIFT CHARGES FOR each 1 METER LIFT BEYOND 3 M INITIAL LIFT

1 x6x 60 / 50 / 25 ) 0.29 min
No. of trips per day foradditional lift 1.0 m above 3 m ( 8 x 60 / 0.29) 1655
Quantity of material by head load 50 kgs
Quantity of material by head load per day ( 1655x50x 0.015 ) 83 tons
Deploy 1 mazdoor for every additional lift of 1.5 m beyond initial lift.or2/3 mazdoor
Lift : Upto 3.00 m for materials under this Category Unit: 83 TONS
Rate Amount
1 2 3 4 5 6
Mazdoor Day 1.00 0.00 0.00
Total Rs: for 83
Tonnes 0.00
Rate per tonne 0.00
FOR CATEGORY : PCC slab / Shahabad stone slab / CC block / Laterite stone / BS slab / Wood
Lift : Upto 3.00 m

Lift : ADDITIONAL LIFT CHARGES FOR EACH 1 METER LIFT BEYOND 3 M INITIAL LIFT
254
COM-LDLFT
1 x6x 60 / 50 / 40 ) 0.18 min
No. of trips per day for lift 1.0 m ( 8 x 60 / 0.18 ) 2667
Quantity of material by head load 0.017 cum
Quantity of material by head load per day ( 1667x 0.018 ) 45 cum
Deploy 1 mazdoor for every additional lift of 1.5 m beyond initial lift.or2/3 mazdoor
Lift : Upto 3.00 m for materials under Category Unit: 45 cum

Rate Amount
1 2 3 4 5 6
Mazdoor Day 1.00 0.00 0.00
Total Rs: for 45 cum 0.00

Rate per cum 0.00
255
COM-LDLFT
256
COM-LDLFT
(Lead) charges for

trucks and tippers
per cu.meter for
water/ 1000 litres
7
0.00
0.00
0.00
0.00
257
COM-LDLFT
0.00
0.00
0.00
brick work
Rs/1000 No
7
0.00
0.00
brick work
Rs/1000 No
7
0.00
0.00
258
COM-LDLFT
Amount Rs.
0.00
0.00
0.00
0.00
0.00
259
COM-LDLFT
Amount Rs.
0.00
0.00
0.00
0.00
0.00
Amount Rs.
0.00
0.00
0.00
0.00
0.00
Amount Rs.
0.00
0.00
0.00
0.00
0.00
Amount Rs.
0
0.00
0.00
0.00
0.00
Amount Rs.
0.00
0.00
0.00
0.00
260
COM-LDLFT
0.00
0.00
Amount Rs.
0.00
0.00
0.00
0.00
0.00
0.00
Amount Rs.
0.00
0.00
0.00
0.00
0.00
0.00
Amount Rs.
0.00
0.00
0.00
0.00
0.00
0.00
Amount Rs.
0.00
0.00
0.00
0.00
0.00
0.00
Amount Rs.
0.00
0.00
0.00
261
COM-LDLFT
0.00
0.00
0.00
Amount Rs.
0
0
0
0
Amount Rs.
0
0
0
0
Amount Rs.
262
COM-LDLFT
0
0
0
263

SSR Data

Uploaded by

Copyright:

Available Formats

SSR Data

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SSR Data

Uploaded by

Copyright:

Available Formats

Basic Data (Annexure II)

REVISION OF DATA RATES

FOR THE YEAR :

STATEMENT OF RATES FOR MATERIALS

GENERAL GUIDE LINES FOR REVISING RATES OF MATERIALS:

Sl No. DESCRIPTION OF MATERIAL UNIT RATE

11 Coir brush Each

17 Delay - noiseless trunk Each

21 Detonator electric Each

28 Fine aggregate / sand ( screened )(including seigniorage charges) cum

32 G I Pipe 100 mm dia B Class Rm

39 G.I sheet ( plain ) tonne

47 Jungle wood planks cum

48 Khandki stone 15 to 20 cm height Each

49 Khandki stone 20 to 25 cm height Each

50 Khandki stone 25 to 30 cm height Each

51 Kilometre stone one line dressed Each

52 LDPE sheet ( Geo membrane ) 500 micron thick sqm

53 LDPE sheet ( Geo membrane ) 750 micron thick sqm

54 LDPE sheet ( Geo membrane ) 1000 micron thick sqm

56 Murum(including seioniorage charges and loading charges) cum

57 Oxalic acid ltr

ADDITIONAL MATERIALS FOR GATES & HOISTS

Cast steel components :( Basic metal - steel ) 17.00 56.25 13.19 85

Sl No. DESCRIPTION OF MATERIAL UNIT RATE

MATERIALS FOR POWER SUPPLY WORKS

Sl No. DESCRIPTION OF MATERIAL UNIT RATE

DETAILS OF CAPITAL COST OF MACHINERY / EQUIPMENT

GUIDE LINES FOR FIXING CAPITAL COST OF MACHINERY / EQUIPMENT:

Sl No: DESCRIPTION OF MACHINERY / EQUIPMENT UNIT Capital Cost

1 Agitator car / Transit mixer 2 cum ( excluding tyres ) Each in Rs:

54 Tipper 5 cum ( excluding tyres ) Each

ACCESSORIES TO MACHINERY / EQUIPMENT

Sl No. DESCRIPTION OF MATERIAL UNIT

AGGREGATE CRUSHING & PROCESSING PLANT

1 Jaw crusher 900 x 500 mm ( 120 tph ) with 50 hp motor Each

OTHER COSTS ON MATERIAL / MACHINERY / EQUIPMENT

Sl No. DESCRIPTION OF MATERIAL UNIT

16 Sundries ( Lumpsum for unquantified inputs ) LS

17 Water hose ( pressure ) 20 mm dia Rm

24 Other accessories / controls / junctions LS

25 Miscellaneous fittings / switches etc LS

28 Gas cutting set ( 2 Nos 15 m hose and nozzle unit ) EACH

30 Welding holder set ( cable / holder / gloves / mask etc ) EACH

31 Use rate of ropes LS

MATERIALS FOR GATES AND HOISTS

FOR THE YEAR :

Sl No. DESCRIPTION OF MATERIAL UNIT

1 Worm reducers EACH in Rs.

Worm reducers EACH

2 Electric motor 20 hp EACH

Electric motor 17.5 hp EACH

3 Electric motor 12.5 hp EACH

4 Electric motor 5 hp EACH

5 Electric motor 3 hp EACH

Electric motor 2 hp EACH

6 Floating shaft 300 mm dia Kg

7 Manual operating system EACH

8 Gate position indicator EACH