Reformulated SoR For The Year 2013-14

Government of Andhra Pradesh
Reformulated BASIC SCHEDULE

OF RATES (Excluding VAT and
Excise Duty)
FOR THE YEAR 2013-14 as part of
implementation of GST Act
BOARD OF CHIEF ENGINEERS

PART-I
(WATER RESOURCES
DEPARTMENT WORK ITEMS)
Sl.No Description Page No
1 Part-I(Water Resources work items) 1 30
2 Part-II(Road&Bridge Works) 1 12
3 Part-IV(Public Health Works) 1 17
4 Part-III(Buildings) Civil items 1 98
Electrical items 1 129

STATEMENT OF RATES FOR MATERIALS FOR THE YEAR 2013-14
Basic Rate for

Sl SoR 2013-14
DESCRIPTION OF MATERIAL UNIT
No. excluding
subsumed taxes
1 Acetylene gas cum 272
2 Asphalt 80/100 Grade Kg 33
3 Binding wire Kg 60
4 Burnt stone slab 10 cm thick sqm 238
Cement 43 Gr/53 Gr (Including loading charges)

5 tonne 3197
Note: As per Monthly rate fixed by Sub-Committee
6 Chequered plate Kg 51
Coarse aggregate 10-4.75 mm(excluding

7 cum 790
Seignioragecharges)
Coarse aggregate 20-10 mm(excluding Seigniorage

8 cum 1095
charges)

9 cum 1038
charges)

10 cum 576
charges)
11 Coir brush Each 36
12 Copper sheet 16 SWG kg 565
Coursed rubble stone 30 x 30 x 45 cm(excluding

13 Each 17
Seigniorage charges)
Coursed rubble stone 30 x 30 x 60 cm(excluding
14 Each 20
15 Curing Compound Ltr 97
16 D – cord Rm 12
17 Delay - noiseless trunk Each 16
18 Detonating fuse coil Rm 9
1
19 Detonating shock tube / Cord relays Rm 51
20 Detonator delay type Each 18
21 Detonator electric Each 10
22 Detonator ordinary Each 7
23 Empty cement bag Each 4.50
24 Explosive ANFO kg 31
25 Explosive ANFO high strength booster kg 58
26 Explosive small dia ( Kelvex-220 or equivalent) kg 55
(a)Fine aggregate/ sand(unscreened) for Concrete

cum 367
& Filtering items) (excluding Seigniorage charges)
27
b)Fineaggregate/Sand(unscreened)forfilling(excluding
cum 271
Fine aggregate /Sand (Screened) for Mortar
,Plastering
28 cum 481
items and Sand blasting items(excluding Seigniorage
charges)
29 Geo-textile ( filter fabric ) 160 gsm sqm 83
32 G I Pipe 100 mm dia B Class Rm 625
33 G I Pipe 15 mm dia A class Rm 89
34 G I pipe 25 mm dia A class Rm 136
35 G I pipe 40 mm dia B class Rm 247
36 G I pipe 50 mm dia A class Rm 272
37 G I Pipe 80 mm dia B Class Rm 417
2
38 G.I Bolts / Nuts and Washers kg 90
39 G.I sheet ( plain ) tonne 56122
40 Hariyala turfing sods sqm 24
41 Hectometer stone one line dressed Each 219
42 Hemp yarn kg 61
43 Honne wood planks cum 42109
44 Hume pipe with collar 150 mm dia Rm 272
45 Hume pipe with collar 300 mm dia Rm 536
46 J- Bolts 30 cm long Each 28
47 Jungle wood planks cum 17955
48 Khandki stone 15 to 20 cm height Each 10
51 Kilometer stone one line dressed Each 410
52 LDPE sheet ( Geo membrane ) 500 micron thick sqm 72
55 M S Bolts / Nuts / Washers kg 72
Murrum(including loading charges but excluding

56 cum 103
Seigniorage charges )
3
57 Oxalic acid Ltr 63
58 Oxygen gas cum 43
59 PVC sealing strip Rm 37
60 PVC water stopper 310 mm wide Rm 412
61 PVC pipe of 100 mm dia Rm 149
Reinforcement steel (HYSD/TMT )(Including loading

62 charges) tonne 36565
Note: As per Monthly rate fixed by Sub-Committee
63 Resin bond Cement capsule Each 55
Rough stone 20 x 20 x 75 cm ( Including Loading

64 Each 21
charges but excluding Seigniorage Charges)
Shahabad stone slab (including loading charges but

65 sqm 208
excluding Seigniorage charges)
Stone chips (at dump yard/Spoil)(including loading

66 cum 157
charges but excluding Seigniorage charges)
Stone chips ( at quarry )(including loading charges but

67 cum 314
excluding Seigniorage charges)
Structural steel angle / channel / beam / bars Note:

68 tonne 37415
As per Monthly rate fixed by Sub-Committee
Structural steel plate / flats Note: As per Monthly rate

69 tonne 35544
fixed by Sub-Committee
70 Super Plasticizer (Conplast RP-264 or equivalent ) kg 64
71 Synthetic Enamel paint 1st quality Ltr 186
72 Synthetic adhesive ( Resin + Hardener ) Kg 264
73 Tar felt joint filler board 12 mm thick sqm 322
74 Tar felt joint filler board 20 mm thick sqm 483
Through stones 20 x 20 x 30 to 45 cm (including

75 Each 22
loading charges but excluding Seigniorage charges)
Through stones 25 x 25 x 45 to 60 cm long (including
76 Each 38
4
Through stones 30 x 30 x 65 to 75 cm long (including
77 Each 57
Un-coursed rubble stones ( at dump yard /Spoil)

78 (including loading charges but excluding Seigniorage cum 150
charges)
Un-coursed rubble stones ( at quarry )( including
79 cum 280
80 Water proofing compound kg 56
81 Welding electrodes 4 mm dia Each 11
82 Wire brush Each 34
83 Wire mesh 20 gauge sqm 180
84 Zinc chromate red oxide primer paint Ltr 133
85 inorganic zinc silicate Ltr 507
86 solvent less coal tar epoxy paint Ltr 211
87 Zinc phosphate primer Ltr 164
88 Allkyd based iron oxide paint Ltr 144
89 a) Cost of hdpe (90mm dia) Rm 527
b) light black MS casing pipe 100 mm dia (4mm thick) Rm 570
90 welded steel wire fabric 100X100X5 mm size Kg 128
91 Protective Mastic Ltr 366
92 Solventless coal tar epoxy (brown) Ltr 299
ADDITIONAL MATERIALS FOR GATES & HOISTS
1 Alloy steel ( IS : 1570-carbon steel ) shafts Kg 166
2 Alloy steel ( IS : 1570-stainless steel ) pins Kg 357
3 Bolt / Nut / Washer ( hot dipped galvanized ) Kg 111
5
4 Bolt / Nut / Washer ( stainless steel ) Kg 289
5 Bronze/Aluminum alloy(IS:305)bearings/bushes Kg 731
6 Cast iron blocks Kg 68
7 Cast steel drums / gears Kg 179
8 Cast steel pinions Kg 170
9 Cast steel wheels / pulleys / hubs / rollers /Retainers Kg 153
Chemical for de-greasing/ de-rusting/phosphate

10 Ltr 115
Coating
11 Coal tar epoxy paint Ltr 165
12 Forged steel hooks / shackles Kg 221
13 MS pipe 200 / 300 mm dia Kg 149
14 MS pipe 32 mm dia Rm 157
15 MS pipe 25 mm dia Rm 128
16 Rubber bottom seal ( IS : 11855 ) (100mmX14 mm) Rm 659
Rubber side seal ( music note type Teflon claded ) (

17 Rm 1599
IS : 11855 )(36ØX113mmX14mm)
Rubber side seal ( music note type uncladed ) ( IS :

18 Rm 1287
11855 )(36ØX113mmX14mm)
Rubber side seal Z-type ( IS : 11855

19 Rm 2066
)(36ØX120mmX19mm)
Rubber corner seal ( Teflon claded ) ( IS : 11855 )

20 Each 3197
(36Ø)
21 Rubber corner seal ( un claded ) ( IS : 11855 ) (36Ø) Each 2651
22 Stainless steel plates / flats Kg 234

Welding electrode 4 mm dia x 450 mm (radiographic
23 Each 15
low hydrogen )
Welding electrode 4 mm dia x 450 mm (stainless steel
24 Each 22
)
6
25 Wire rope 6x37 constn ( IS : 2266 ) Kg 213
26 Zinc Kg 140
27 Zinc rich ( zinc content : 90 % ) epoxy primer Ltr 507
Capital cost of Machinery/Equipment

Sl DESCRIPTION OF MACHINERY / UNIT Basic Rate for
No EQUIPMENT SoR
2013-14
excluding
subsumed
taxes
1 Agitator car / Transit mixer 2 cum ( excluding tyres ) Each 1676544
tyres and tubes 6 sets Each 67062

2 Air compressor 5 cmm electric Each 553649
3 Air compressor 7 cmm diesel Each 740799
5 Air compressor 8.5 cmm diesel Each 846070
6 Air compressor 8.5 cmm electric Each 873362
8 Angle Dozer 90 hp Each 4269339
9 Batching plant 0.5 cum with accessories(6 Cum/hr) Each 935745
10 Batching plant 2 x 1.00 cum with accessories( 15 Each 3310200

Cum/hr)
11 Batching plant 2 x 1.50 cum with accessories( 50 Each 4230349
Cum/hr)
12 Bending machine Each 450680
13 Clamp shell and hoisting ropes Each 25510
14 Concrete bucket 1.5 cum Each 43668
15 Concrete hand mixer 45/30 ltr Each 12087
16 Concrete mixer 300/200 ltr(diesel) Each 116968
17 Concrete mixer 300/200 ltr ( electric ) Each 113069
7
18 Concrete mixer 600/400 ltr(diesel) Each 202745
19 Concrete mixer 600/400 ltr ( electric ) Each 198846
20 Concrete paver 100 Sqm / hr Each 1841079

21 Convey mucker ( excluding tyres ) Each 3006082
tyres and tubes 6 sets 67062

22 Core drilling machine Each 857767
23 Diesel generating set 30 KVA Each 385995
24 Diesel generating set 50 KVA Each 499064
25 Diesel Loco 45 hp Each 1653150

26 Dewatering pump 5 hp diesel Each 31192
27 Dewatering pump 5 hp electric Each 19105

32 Drifter Each 825016

33 Drilling jumbo ( excluding tyres ) Each 1015284
34 Dumper 4.5 cum ( excluding tyres ) Each 1130692

35 Geophysical Ele.resistivity meter Each 414847
36 Grouting pump Each 79538
37 Guniting / sand blasting equipment Each 238095
38 Ice plant with accessories 30 t / day Each 1991266
39 Jack hammer Each 50686

40 Needle vibrator 40 mm petrol Each 15596
41 Needle vibrator 40 mm electric Each 16376
42 Needle vibrator 60 mm petrol Each 16765
43 Needle vibrator 60 mm electric Each 19885
44 Planing machine 4 m stroke Each 663265
45 Plate shearing machine up to 12 mm Each 361395
8
46 Pneumatic placer 0.5 cum Each 452277
47 Pneumatic tamper Each 66282
48 Pug cutting machine Each 13605
49 Pusher leg Each 44218
50 Road roller diesel 10 t Each 662820
51 Shovel 0.50 cum 75 hp Each 2924205
52 Shovel 0.85 cum 110 hp Each 4975047
53 Stationery derrick crane 5 t Each 509202
54 Tipper 5 cum ( excluding tyres ) Each 1267155
55 Tipping tub 1.5 cum Each 187149
56 Tower crane 5 tonne Each 5828915
57 Transformer 250 KVA Each 361395
58 Truck 10 t ( excluding tyres ) Each 1150187

59 Truck mounted derrick crane 5 t ( excluding tyres ) Each 1528384

60 Upright drilling machine Each 43668
61 Ventilation fan 20 hp Each 232143
62 Vibratory pad foot roller 8 t Each 2300374
63 Wagon drill Each 506862

64 Water tanker 8000 ltr (excluding tyres) Each 1215810

65 Welding set Each 42857
66 Winch 35 hp electric Each 292420
67 Hydraulic Truck Crane 30T Each 11294643
68 Hydraulic Truck Crane 16T Each 8102679

9
69 Heavy Duty Airless Spray Painting Equipment Each 380357
ACCESSORIES TO MACHINERY / EQUIPMENT

1 Casing shoe bit Each 9524
2 Diamond core bit BX size Each 9524
3 Diamond core bit NX size Each 11429
4 Double tube core barrel Each 12160
1701
5 Extension drill rod with coupling sleeve Rm
3231
6 Jack hammer drill rod 1.5 m Each
5017
7 Jack hammer drill rod 2.5 m Each
595
8 Nozzle for Guniting / sand blasting gun Each
9 Paving Cylinder Each 25714

10 Rails 30R ( 30 kg / m ) tonne 47619
11 Reamer shell Each 4762

12 T.C. Cross bit 50 mm dia Each 4762

15 Tyres and Tubes for truck Set 14036
16 Wire rope 16 mm dia Rm 252
17 Excavation of drain with Excavator cum 35
OTHER COSTS ON MATERIAL / MACHINERY / EQUIPMENT
1 Air hose 25 mm dia Rm 142

2 Air hose 50 mm dia Rm 253
3 Demand charges (HT-I : General-11 KV category)on KVA 350
power supply(as per APEPDCL tariff) /month
4 Diesel Ltr 54
5 Electric power (HT-VIII Category) including tax ( 1.5 Kwhr 9
times of the Tariff of HT-I(A):General-11 KVA
Category) (as per APEPDCL tariff)
6 Excise duty on Gates / Hoist supplies % 0%
7 Insurance charges on machinery %/ 1%

annum
10
8 Interest on capital cost %/ 12.50%
annum
9 Lubricants Ltr 234
10 Petrol Ltr 69
11 Rivets Kg 84
12 Road tax on transport vehicles Rs./annum 18132
13 Shalimatic sealing compound Kg 78
67
14 Shutter oil Ltr
15 Structural steel fabrication Kg 24
16 Sundries ( Lump sum for un quantified inputs ) LS 41
186
17 Water hose ( pressure ) 20 mm dia Rm
18 Steel wedges LS 14
19 Elbows / Nipple / Plugs etc., LS 14
20 Soldering materials LS 14
21 Steam circulation arrangement LS 14
22 Fuel charges ( gas for heating ) LS 16
23 Vulcanizing materials LS 17
24 Other accessories / controls / junctions LS deleted
25 Miscellaneous fittings / switches etc LS deleted
26 Anchors / supports for cables / lights LS deleted

27 Civil works for foundations / pedestals / duct etc LS deleted
12077
28 Gas cutting set ( 2 No’s 15 m hose and nozzle unit ) Each
29 Grease Kg 212
6234
Welding holder set ( cable / holder / gloves / mask etc
30 Each
)
31 Use rate of ropes LS 150
MATERIALS FOR GATES AND HOISTS
1 Worm reducers Each 174984
94354
2 Electric motor 20 hp(Double Shaft) Each
3 Electric motor 17.5 hp(Double Shaft) Each 66906

4 Electric motor 12.5 hp(Double Shaft) Each 56613
5 Electric motor 5 hp(Double Shaft) Each 25733
6 Electric motor 3 hp (Double Shaft) Each 18013
11
7 Electric motor 2 hp (Double Shaft) Each 9435
140
8 Floating shaft 300 mm dia Kg
25170
9 Manual operating system Each
10 Gate position indicator Each 152682
11 Ele-magnetic brake Each 27449
12 Electric cable / switch / control panel etc LS 42840

3929
13 Wire rope sockets Each
Materials other than covered under WR Work items

Sl. Description Unit Basic Rate for SoR
No. 2013-14
excluding
subsumed taxes
M-002 Quarried stone 150 - 200 mm size for Hand Broken Cum 133
(Excluding Seigniorage charges)
M-003 Boulder with minimum size of 300 mm for Pitching Cum 149
(Excluding Seigniorage charges)
M-004 Coarse sand for filling (Excluding Seigniorage Cum Rate as per item
charges) no.27(b) of material
of WRD
M-005 Coarse sand for mortar(Excluding Seigniorage Cum Rate as per item
charges) no.27(a) of material
of WRD
M-006 Fine Sand (Excluding Seigniorage charges) Cum Rate as per item
no.28 of material of
WRD
M-007 Murrum (Excluding Seigniorage charges) Cum Rate as per item
no.56 of Material
rates of WRD.
M-008 Gravel/Quarry spall(Excluding Seigniorage Charges) Cum 98
M-009 Granular Material or hard Murrum for GSB works Cum Deleted
M-010 Granular Material or hard Murrum for GSB Cum 89

works(Excluding Seigniorage charges)
M-011 Fly ash conforming to IS: 3812 ( Part II & I) Cum 63
M-012 Filter media/Filter Material as per Table 300-3 Cum 319

(MoRT&H Specification) (excluding Seigniorage
Charges)
12
M-013 Close graded Granular sub-base Material 53 mm to Cum 617
9.5 mm (excluding Seigniorage Charges)
M-014 Close graded Granular sub-base Material 37.5 mm Cum 633

to 9.5 mm (excluding Seigniorage Charges)

M-016 Close graded Granular sub-base Material 9.5 mm to Cum 548

M-017 Close graded Granular sub-base Material 9.5 mm to Cum 538


M-019 Close graded Granular sub-base Material 4.75mm to cum 452
75 micron mm(excluding Seigniorage Charges)

(excluding Seigniorage Charges)
M-021 Stone crusher dust finer than 3mm with not more Cum 324
than10% passing 0.075 sieve. (excluding
Seigniorage Charges)
M-022 Coarse graded Granular sub-base Material 2.36 mm Cum 405
& below (excluding Seigniorage Charges)
M-023 Coarse graded Granular sub-base Material 4.75mm cum 438

to 75 micron mm (excluding Seigniorage Charges)





M-029 Coarse graded Granular sub-base Material 53 mm to Cum 786

26 .5mm (excluding Seigniorage Charges)
13
M-030 Aggregates below 5.6 mm(excluding Seiniorage Cum 505
Charges)
M-031 Aggregates 22.4 mm to 2.36 mm (excluding Cum 829
Seiniorage Charges)
Seiniorage Charges)
M-033 Aggregates 45 mm to 2.8 mm (excluding Seiniorage Cum 605

Charges)
M-034 Aggregates 45 mm to 22.4 mm (excluding Cum Rate as per item

Seiniorage Charges) no.9 of Material
rates of WRD.
Charges)
M-036 Aggregates 53 mm to 22.4 mm (excluding Cum 790

Seiniorage Charges)

Charges)
M-038 Aggregates 63 mm to 45 mm (excluding Seiniorage Cum 600
Charges)
M-039 Aggregates 90 mm to 45 mm (excluding Seiniorage Cum Rate as per item

Charges) no.10 of Material
rates of WRD.

rates of WRD.

Seiniorage Charges)
M-042 Aggregates 13.2 mm to 0.09 mm(excluding Cum 724
Seiniorage Charges)
Seiniorage Charges)
M-044 Aggregates 13.2 mm to 10 mm(excluding Cum 933

Seiniorage Charges)

rates of WRD.
Charges)

Charges)
14
Seiniorage Charges)
Seiniorage Charges)
M-050 Aggregates 6 mm nominal size(excluding Seiniorage Cum 667

Charges)
M-051 Aggregates 10 mm nominal size(excluding Cum 848
Seiniorage Charges)
M-052 Aggregates 13.2/12.5 mm nominal size(excluding Cum 995

Seiniorage Charges)
Seiniorage Charges)

Seiniorage Charges)

Seiniorage Charges)
M-056 AC pipe 100 mm dia Metre Rate as per PH item
M-057 Acrylic polymer bonding coat Litre 391

M-058 Aluminum Paint Litre 250
M-059 Aluminum alloy plate 2mm Thick Sqm 315
M-060 Aluminum alloy/Galvanized steel Tonne 58559
M-061 Aluminum sheeting fixed with encapsulated lens type Sqm 799
reflective sheeting including 2% towards lettering,
cost of angle iron, cost of drilling holes, nuts, bolts
etc. and signs as applicable
M-062 Aluminum studs 100 x 100 mm fitted with lens No’s As per local market
rate
M-063 Barbed wire Kg 68
M-064 Bearing (Cost of parts) No’s 485

M-065 Bearing (Cast steel rocker bearing assembly of 250 No’s 668
tonne )
M-066 Bearing (Elastomeric bearing assembly consisting of Cm3

7 internal layers of elastomer bonded to 6 nos.
internal reinforcing steel laminates by the process of As per Market
vulcanization,) Competitive rates.
M-067 Bearing (Forged steel roller bearing of 250 tonne) No’s
15
M-068 Bearing (Pot type bearing assembly consisting of a No’s
metal piston supported by a disc, PTFE pads
providing sliding surfaces against stainless steel
mating together with cast steel
assemblies/fabricated structural steel assemblies
duly painted with all components
M-069 Bearing (PTFE sliding plate bearing assembly of 80 No’s
tonne)
M-070 Bearing (Supply of sliding plate bearing of 80 tonne) No’s
M-071 Bentonite Kg 7
M-072 Binding wire Kg Rate as per item

no.3 of Material
rates of WRD.
M-073 Bitumen ( Cationic Emulsion ) Tonne
M-074 Bitumen (60-70 grade)(Excluding taxes) Tonne
M-075 Bitumen (80-100 grade ) (Excluding taxes) Tonne
As per rates fixed by

M-076 Bitumen (Cutback ) Tonne R&B Dept based on
refinery rates
M-077 Bitumen (emulsion)(Excluding taxes) Tonne
M-078 Bitumen (modified graded) Tonne
M-079 Brick Each As per Building SSR
M-080 C.I. shoes for the pile Kg 46
M-081 Cement Tonne Rate as per item

no.5 of Material
rates of WRD.
M-082 Cold twisted bars (HYSD/TMT Bars) Tonne Rate as per item
no.62 of Material
rates of WRD
M-083 Collar for joints 300 mm dia No’s 125
M-084 Compressible Fibre Board(20mm thick) Sqm 459
M-085 Connectors/ Staples Each 62
M-086 Copper Plate(12m long x 250mmwide) Kg 405
M-087 Corrosion resistant Structural steel Tonne 48895
16
M-088 Corrugated sheet, 3 mm thick, "Tie" beam section Kg 170
railing
M-089 Credit for excavated rock found suitable for use Cum 179
M-090 Curing compound Liter 102
M-091 Delineators from ISI certified firm as per the Each As per local
standard drawing given in IRC - 79 competitive
quotations
M-092 Earth Cost or compensation for earth taken from Cum 40
private land(Excluding Seigniorage Charges)
M-093 Elastomeric slab seal expansion joint assembly Metre As per local
manufactured by using chloroprene, elastomer for competitive
elastomeric slab unit conforming to clause 915.1 of quotations
IRC: 83 (part II),
M-094 Electric Detonators @ 1 detonator for 1/2 gelatin 100 940

stick of 125 gms each no’s
M-095 Epoxy compound with accessories for preparing Kg 273
epoxy mortar
M-096 Epoxy mortar Kg 90
M-097 Epoxy primer Kg 464
M-098 Epoxy resin-hardener mix for prime coat Kg 480
M-099 Flag of red color cloth 600 x 600 mm Each 24
M-100 Flowering Plants Each 38
M-101 Galvanized MS flat clamp No’s 166

M-102 Galvanized steel wire crates of mesh size 100 mm x Sqm 149
100 mm woven with 4mm dia. GI wire in rolls of
required size.
M-103 Galvanized structural steel plate 200 mm wide, 6 Kg 770
mm thick, 24 m long
M-104 Gelatin 80% Kg 57
M-105 Geo grids Sqm As per local

competitive
quotations
M-106 (a)Geo membrane 500 micron thick Sqm 62
(b) Geo membrane 750 micron thick Sqm 94
(c) Geo membrane 1000 micron thick Sqm 129
17
M-107 Geo nets Sqm As per local
competitive
quotations
M-108 (a)Geo textile 160 gsm Sqm 86
(b) Geo textile 200 gsm Sqm 97
(c) Geo textile 250 gsm Sqm 117
M-109 Geo textile filter fabric Sqm As per local

competitive
quotations
M-110 GI bolt 10 mm Dia No’s 17
M-111 Grouting pump with agitator Hour Rate covered in item

no. 36 in hire
charges of
machinery of Water
Resources work
items
M-112 Grass (Doob) Kg 5
M-113 Grass (Fine) Kg 8
M-114 HDPE pipes 75mm dia Metre Rate as per PH items
M-115 HDPE pipes 90mm dia Metre Rate as per PH items
M-116 Hedge plants Each Rate as per local

competitive
M-117 Helical pipes 600mm diameter Metre quotations
M-118 Hot applied thermoplastic compound Litre
M-119 HTS strand Tonne
M-120 Joint Sealant Compound Kg
M-121 Jute netting, open weave, 2.5 cm square opening for Sqm 70
seeding and Mulching
M-122 LDO for steam curing Litre 50
M-123 M.S. Clamps Kg Deleted
M-124 M.S. Clamps Kg Rate as per local

competitive
quotations
18
M-125 M.S. shoes @ 35 Kg per pile of 15 m Kg Rate as per local
competitive
quotations
M-126 Mild Steel bars Tonne 38690
M-127 Modular strip/box seal expansion joint including Metre Rate as per local
anchorage catering to a horizontal movement competitive
beyond 70 mm and up to 140mm assembly quotations
comprising of edge beams, central beam,2 modules
chloroprene seal, anchorage elements, support and
control system, all steel sections protected against
corrosion and installed by the manufacturer or his
authorized representative
M-128 Modular strip/box seal expansion joint catering to a Metre Rate as per local
horizontal movement beyond 140mm and up to competitive
210mm box/box seal joint assembly containing 3 quotations
modules/cells and comprising of edge beams, two
central beams, chloroprene seal, anchorage
elements, support and control system, all steel
sections protected against corrosion and installed by
the manufacturer or his authorized representative
M-129 Nipples 12mm No’s 16
M-130 Nuts and bolts Kg 80

M-131 Paint Litre 189
M-132 Pavement Marking Paint Litre Rate as per local
competitive
quotations
M-133 Paving Fabric Sqm
M-134 Perforated geo synthetic pipe 150 mm dia Metre
M-135 Perforated pipe of cement concrete, internal dia 100 Metre

mm
M-136 Pesticide Kg Rate as per local

competitive
quotations
M-137 R.C.C Pipes 200 mm dia, 2.5 m long for drainage Metre Rate as per PH item
M-138 Plastic sheath, 1.25 mm thick for dowel bars Sqm Rate as per local
competitive
quotations
M-139 Plastic tubes 50 cm dia , 1.2 m high No’s Rate as per local
competitive
M-140 Polymer braids Metre quotations
M-141 Pre moulded Joint filler, 25 mm thick for expansion Sqm

joint
19
M-142 Pre-coated stone chips of 13.2 mm nominal size Cum Rate as per local
competitive
quotations
M-143 Preformed continuous chloroprene elastomer or Meter Rate as per local
closed cell foam sealing element with high tear competitive
strength, vulcanized in a single operation for the full quotations
length of a joint to ensure water tightness.
M-144 Pre-moulded asphalt filler board Sqm
M-145 Pre-packed cement based polymer concrete of Kg Rate as per local

strength 45 Mpa at 28 days competitive
quotations
M-146 Sealant Primer Kg AS per Building SSR
M-147 Quick setting compound Kg AS per Local market

rate
M-148 Random Rubble Stone(Including Loading Charges Cum 233

but excluding Seignorage Charges)
M-149 RCC Pipe NP 4 heavy duty non pressure pipe Metre Rate as per PH items
1000mm dia
M-150 RCC Pipe NP 4 heavy duty non pressure pipe 1200 Metre
mm dia
M-151 RCC Pipe NP 4 heavy duty non pressure pipe 300 Metre
mm dia
M-152 Reflectorising glass beads Kg Rate as per local
competitive
M-153 Reinforcement strips 60 mm wide 5 mm thick as per Metre
quotations
clause 3102. (Copper Strips)

clause 3102. (Galvanized carbon steel strips)
clause 3102. (Glass reinforced polymer/ fiber
reinforced polymer/polymeric strips)
clause 3102. (Stainless steel strips)

clause 3102. (Aluminum strips)
M-158 Rivets Each 5
M-159 Sand bags (Cost of sand and Empty cement bag) Per 15
bag
M-160 Sapling 2 m high 25 mm dia Each Rate as per local
competitive
quotations
M-161 Scrap tyres of size 900 x 20 No’s 68
20
M-162 Seeds(Grass) Kg 18
M-163 Cost of Selected earth (Excluding Seignorage Cum 40
Charges)
M-164 Separation Membrane of impermeable plastic Sqm Rate as per local
sheeting 125 micron thick competitive
quotations
M-165 Sheathing duct Metre Rate as per local

competitive
quotations
M-166 Shrubs Each 15
M-167 Sludge / Farm yard manure @ 0.18 cum per 100 Cum Rate as per local
sqm at site of work for turfing competitive
quotations
M-168 Sodium vapour lamp Each As per Building SSR
M-169 Square Rubble Coursed Stone(Including Loading Cum 2150

Charges but excluding Seigniorage charges)
M-170 Steel circular hollow pole of standard specification Each Rate to be obtained
for street lighting to mount light at 5 m height above from
deck level Electricity/Municipal
M-171 Steel circular hollow pole of standard specification Each Departments
for street lighting to mount light at 9 m height above
road level
M-172 Steel drum 300 mm dia 1.2 m high/empty bitumen No’s As per local
drum competitive market
rate
M-173 Steel helmet and cushion block on top of pile head Kg As per local
during driving. competitive market
rate
M-174 Steel pipe 25 mm external dia as per Metre 238
IS:1239
M-175 Steel pipe 50 mm external dia as per Metre 463
IS:1239
M-176 Steel wire rope 20 mm Kg 153
M-177 Steel wire rope 40 mm Kg 174
M-178 Strip seal expansion joint Metre Rate as per local

competitive
quotations
M-179 Structural Steel(HYSD/TMT bars) Tonne Rate as per item
no.62 of Material
rates of WRD
21
M-180 Super plasticizer admixture IS marked as per 9103- Kg 55
1999
M-181 Synthetic Geo grids as per clause 3102.8 and Sqm Rate as per local
approved design and specifications. competitive
quotations
M-182 Through and bond stone Each Rate as per item
no.75 of Material
rates of CAD
(a) 20X20x30 to 45 cm long Each
Through and bond stone Rate as per item

no.76 of Material
rates of CAD
(b) 25X25x45 to 60 cm long
Through and bond stone Each

Rate as per item
(c) 30X30x65 to 75 cm long no.77 of Material
rates of CAD
M-183 Tie rods 20mm diameter No’s 41
M-184 Tiles size 300 x 300 mm and 25 mm thick Each As per Building SSR
M-185 Timber Cum

M-186 Traffic cones with 150 mm reflective sleeve No’s Rate as per local
competitive
quotations
M-187 Tube anchorage set complete with bearing plate, No’s Rate as per local
permanent wedges etc competitive
quotations
M-188 Un slaked lime Tonne 2419
M- Water charges(Urban) KiloLit 95

189(a) re
Water charges(Rural) KiloLit 77
(b) re
M-190 Water based cement paint Litre As per Building SSR
M-191 Welded steel wire fabric Kg 128
M-192 Wire mesh 50mm x 50mm size of 3mm wire Kg 208
M-193 Wooden ballies 2" Dia for bracing Each As per Building SSR
M-194 Wooden ballies 8" Dia and 9 m long Each As per Building SSR
22
M-195 Wooden packing Cum 1076
M-196 Wooden staff for fastening of flag 25 mm dia, one m Each 67

long
Item Printing new letter and figures of any shade (ii) per 2
8.3 English Roman cm
height
per
letter
Item Painting Two Coats on New Concrete Surfaces Sqm As per Building SSR
8.8
Item Painting angle iron post Two Coats Sqm As per Building SSR
8.9
Miscellaneous Items
1 Benching old embankment slopes 0.45 X 0.45 M RM 4

2 Laying Sand Bags in the stipulated places including per 26
cost of empty cement bag, sand, thread, stiching bag
charges and labour charges with 13.615 % overhead
charges and contractors profits.
3 Rough stone for revetment 225mm thick ( including Cum 140
Loading charges but excluding Seigniorage charges)
4 Eradication of Weed growth from Drains, Canals by Sqm 2

spraying Chemicals
5 Thinner ltr 109
23
Conveyance
Charges of Material
24
LEAD/LIFT/LOADING & UNLOADING CHARGES
FOR THE YEAR : 2013-14
A. (Lead) Conveyance Charges for materials by head load
Earth / Sand
/Gravel /
Murrum/ Lime/ Cement /
PCC slab/ Shahbad
Total distance Surki/ Size Reinforce-
slab / CC block/ BS
Sl No. ( Total lead includes stone / Cut ment steel
slab/ Late-rite /
initial lead ) stone Rubble / Str steel
Wood Rs / cum
Coarse Rs / tonne
aggregate
Rs/ Cum
1 2 3 4 5
Total lead upto 50 m

1 (covered by item rate) initial lead initial lead initial lead
45.60 26.60 58.00
2 Total lead upto 100 m
91.20 53.20 116.10
3 Total lead upto 150 m
B.( Lead) Conveyance charges for machinery per kilometer for transporting
materials by tippers and trucks excluding loading, unloading and idle hire
charges of machinery.
( No loading and unloading charges allowed for machinery loading and unloading )
(Lead)
(Lead)
charges
charges
(Lead) for trucks
for
charges for and
trucks (Lead) charges (Lead) (Lead)
trucks and tippers
and for trucks and charges charges
tippers for per
tippers tippers for for per for
Rubble/Size cu.meter
for Earth Cement/ Steel/ cu.meter trucks
Sl No. Distance stones/ Cut for PCC
/ Sand RCC poles/ AC for per
Stones/ slabs/
/Gravel / & GI sheets/ water/ 1000
Coarse Shahabad
Murrum/ Packed 1000 Nos. of
aggregate slabs/ CC
Lime/ materials/tonne litres Bricks
per & Laterite
Surki/
cu.meter blocks/
per
Wood/
cu.meter
cum
1 2 3 4 5 6 7 8
26.70 25.80 16.10 37.90 16.40 42.90
1 Lead upto 1 km
25
37.30 36.10 22.50 53.00 23.00 60.10
2 Lead upto 2 km
49.80 49.80 31.10 73.20 30.60 80.10
3 Lead upto 3 km
60.40 60.40 37.80 88.80 37.20 97.30
4 Lead upto 4 km
71.10 71.10 44.40 104.50 43.80 114.50
5 Lead upto 5 km
for Every km
beyond 5 km 10.70 10.70 6.70 15.70 6.60 17.20
6 upto 30 km
for Every km 8.90 8.90 5.60 13.10 5.50 14.30

7 beyond 30 km
C.LOADING AND UNLOADING CHARGES BY MANUAL MEANS (idle hire charges of

trucks are not added)
Earth /
Sand Rubble/ size
/Gravel stone/ cut stone/
Description cement in steel in brick work
Sl No. Murrum/ Coarse
of item Rs/tonne Rs./tonne Rs/1000 No
/ Surki/ aggregate,Lime in
Rs/cum
Rs / cum
1 2 3 4 5 6 7
15.30 30.30 50.10 60.00 41.70
1 Loading
7.65 15.15 50.10 60.00 41.70
2 Unloading
D.LOADING AND UNLOADING CHARGES BY MANUAL MEANS (including idle hire
charges of trucks )
Earth /
Sand Rubble/ size
/Gravel stone/ cut brick work
Description of cement in steel in
Sl No. Murrum/ stone/ Coarse Rs/1000
item Rs/tonne Rs./tonne
/ Surki/ aggregate,Lime No
in Rs/cum
Rs / cum
1 2 3 4 5 6 7
93.20 108.40 135.90 145.90 183.40
1 Loading
33.50 54.20 135.90 145.90 183.40
2 Unloading
E.LOADING AND UNLOADING CHARGES BY MECHANICAL MEANS (including

idle hire charges of trucks)
26
Earth / Sand /Gravel Rubble/ size stone/
Murrum/ / Surki/ cut stone/ Coarse
Sl No. Description of item
aggregate,Lime in
Rs / cum Rs/cum
1 2 3 4
44.10 88.10
1 Loading
13.50 13.50
2 Unloading
F.LIFT CHARGES FOR MATERIALS BY HEAD LOAD
Earth / Sand
/Gravel
PCC slab/
Murrum/ Lime/
Cement / Shahbad
Surki/
Total lift Reinforce- slab / CC
Size stone /
Sl No. ( Total lift includes initial ment steel block/ BS
Cut stone
lift ) Str steel slab / Laterite
Rubble /
Rs / tonne / Wood
Coarse
Rs / cum
aggregate
Rs / cum
1 2 3 4 5
Total lift upto 3 m

1 (covered by item rate) Initial lift Initial lift Initial lift
5.30 3.80 7.10
2 For Every 1.00 Lift beyond
initial lift of 3 meters
Note: The Lead Charges are inclusive of 14% Contractor Profit and Overhead charges
27
HIRE CHARGES
28
HIRE CHARGES OF PLANT & MACHINERY
S.No Description of machinery Unit Hire Fuel Crew Total

charge charge Charge in Rs
in Rs in Rs in Rs.
1 2 3 4 5 6 7
1 Agitator car / Transit mixer 2 cum Hour 611.50 816.80 224.60 1652.90
2 Air compressor 5 cmm ( electric ) Hour 88.20 256.80 130.70 475.70
3 Air compressor 7 cmm ( diesel ) Hour 194.80 668.30 167.20 1030.30
4 Air compressor 7 cmm ( electric ) Hour 107.50 342.40 130.70 580.60
5 Air compressor 8.5 cmm ( diesel Hour 222.50 835.30 167.20 1225.00
6 Air compressor 8.5 cmm ( electric) Hour 139.20 428.00 130.70 697.90
7 Air compressor 15 cmm ( electric) Hour 115.70 951.20 139.40 1206.30
8 Angle Dozer 90 hp Hour 1376.90 571.40 187.20 2135.50
9 Batching plant 0.5 cum( 6 cum/hr) Hour 95.30 114.10 269.50 478.90
10 Batching plant 2 x 1.00 cum(15 cum/hr) Hour 337.10 342.40 269.50 949.00
11 Batching plant 2 x 1.50 cum(50 cum/hr) Hour 430.80 418.50 269.50 1118.80
12 Bending machine 3000 x 12 mm Hour 38.60 114.10 104.50 257.20
13 Clamp shell and hoisting ropes Hour 4.60 0.00 0.00 4.60
14 Concrete bucket 1.5 cum Hour 12.70 0.00 0.00 12.70
15 Concrete hand mixer 45 / 30 ltr Hour 4.40 0.00 0.00 4.40
16 Concrete mixer 300 / 200 ( diesel) Hour 42.90 74.30 174.20 291.40
17 Concrete mixer 300 / 200 ltr ( electric) Hour 41.50 38.00 174.20 253.70
18 Concrete mixer 600 / 400 ( diesel) Hour 74.30 148.50 174.20 397.00
19 Concrete mixer 600 / 400 ltr ( electric Hour 72.90 76.10 174.20 323.20
20 Concrete paver 100 sqm / hr Hour 293.60 0.00 334.50 628.10
21 Convey mucker Hour 665.30 264.80 139.40 1069.50
22 Core drilling machine Hour 258.40 222.80 224.60 705.80
23 Diesel generating set 30 KVA Hour 53.50 594.00 104.50 752.00
24 Diesel generating set 50 KVA Hour 69.10 891.00 104.50 1064.60
25 Diesel Loco 45 hp Hour 308.90 501.20 130.70 940.80
26 Dewatering pump 5 hp ( diesel ) Hour 8.20 74.30 87.40 169.90
27 Dewatering pump 5 hp ( electric ) Hour 2.50 38.00 65.50 106.00
29 Dewatering pump 10 hp ( electric Hour 5.50 76.10 65.50 147.10
31 Dewatering pump 20 hp ( electric Hour 10.10 152.20 65.50 227.80
32 Drifter Hour 263.00 0.00 280.80 543.80
33 Drilling jumbo Hour 296.00 40.10 139.40 475.50
34 Dumper 4.5 cum Hour 464.20 374.20 179.70 1018.10
29
35 Geophysical Electric resistivity meter Hour 89.00 0.00 0.00 89.00
36 Grouting pump Hour 20.30 38.00 209.00 267.30
37 Guniting / sand blast equipment Hour 96.00 0.00 174.20 270.20
38 Ice plant & accessories 30 t / day Hour 159.10 1084.30 104.50 1347.90
39 Jack hammer Hour 16.20 0.00 261.30 277.50
40 Needle vibrator 40 mm ( petrol ) Hour 6.10 19.00 125.40 150.50
41 Needle vibrator 40 mm ( electric ) Hour 6.40 7.60 125.40 139.40
42 Needle vibrator 60 mm ( petrol ) Hour 6.50 28.50 125.40 160.40
43 Needle vibrator 60 mm ( electric ) Hour 7.80 11.40 125.40 144.60
44 Planing machine 4 m stroke Hour 105.80 114.10 167.20 387.10
45 Plate shearing machine upto 12 mm Hour 37.60 152.20 112.30 302.10
46 Pneumatic placer 0.5 cum Hour 136.80 0.00 68.30 205.10
47 Pneumatic tamper Hour 16.90 0.00 209.00 225.90
48 Pug cutting machine Hour 5.60 3.80 0.00 9.40
49 Pusher leg Hour 11.30 0.00 0.00 11.30
50 Road roller diesel 10 t Hour 159.70 668.30 167.20 995.20
51 Shovel 0.50 cum 75 hp Hour 809.00 445.50 187.20 1441.70
52 Shovel 0.85 cum 110 hp Hour 1376.40 816.80 187.20 2380.40
53 Stationery derric crane Hour 70.70 0.00 0.00 70.70
54 Tipper 5 cum Hour 358.20 280.70 140.40 779.30
55 Tipping tub 1.5 cum Hour 51.50 0.00 0.00 51.50
56 Tower crane 5 tonne Hour 717.00 197.80 149.80 1064.60
57 Transformer 250 KVA Hour 4607.80 0.00 0.00 4607.80
58 Truck 10 t Hour 331.90 280.70 140.40 753.00
59 Truck mounted derric crane 5 t Hour 416.90 280.70 140.40 838.00
60 Upright drilling machine/Grinder Hour 18.10 38.00 156.00 212.10
61 Ventilation fan 20 hp Hour 10.80 152.20 22.60 185.60
62 Vibratory pad foot roller 8 t Hour 1072.50 965.30 209.00 2246.80
63 Wagon drill Hour 152.70 0.00 224.60 377.30
64 Water tanker 8000 ltr Hour 346.70 280.70 140.40 767.80
65 Welding set Hour 14.60 91.30 0.00 105.90
66 Winch 35 hp ( electric ) Hour 104.20 186.40 209.00 499.60
67 Tractor with 2T roller Hour 345.00
68 Hydraulic Truck Crane 30T Hour 2515.10 118.80 419.30 3053.20
69 Hydraulic Truck Crane 16T Hour 1849.10 75.00 419.30 2343.40
Heavy Duty Airless Spray Painting
70 Equipment Hour 96.40 96.40
71 Concrete Placer Pump 25 Cum/Hr Hour 0.00 456.60 130.70 587.30
30
ROAD & BRIDGE WORKS
MATERIAL & WORK ITEM
RATES
RATES OF MATERIALS & WORK ITEMS
S.S.
Sl. Item Unit SoRate for
No. No. Description (per) 2013-14
1 2 3 4 5
(A) STONE AND ROAD MATERIALS
ROUGH STONE QUARRIED INCLUDING
WEDGING, BREAKING, BURNING,
SPLITING
1 22.a For R.R Masonary Work (other than 1 cum 152.40
Granite, Dolomite and Trap)
2 b.I For SS Revetment work 225 mm 1 cum 133.00
3 b.ii For SS Revetment work 300 mm 1 cum 149.00
4 b.iii For SS Revetment work450 mm 1 cum 129.50
5 C Jeddy Stone above 450 mm to 600 mm 1 cum 179.10
6 d I. Laterite for revetment 225 mm 1 cum 112.40
7 d II. Laterite for revetment 300 mm 1 cum 131.40
8 d.iii Granite for SS revetment 225 mm 1 cum 146.70
9 d.iv Granite for SS revetment 300 mm 1 cum 148.60
Note:- Only when other granite is not
available
10 E Laterite for masonry 1 cum 129.50
11 F Cyclopean stones above 0.2 cum 1 cum 241.90
12 G For R.R.Masonry works ( granite, dolamite 1 cum 233.00
and trap variety)
13 NOTE:- For items 22(a) to 22© and 22(g) 1 cum 76.00
add extra Rs /cum, wherever quarrying
is done by blasting
COURSED RUBBLE STONE QUARRYING
WEDGING, BREAKING, BURNING AND
SPLITTING FOR SS FIRST SORT
WORKS
14 23.a Granite, Dolamite and trap 1 cum 249.50
15 B For other varieties 1 cum 179.10
16 27 Granite stone slabs for culverts, lintels and 1 cum 1645.70
copings (3 faces dressed coarsed rubble
masonry)
17 NOTE: - For items 23(a), 23(b) and 27 add 1 cum 74.00
extra Rs. Per Cum, wherever quarrying is
done by blasting
18 28 Bond stones ( 600 x 200 x 200 mm ) each 28.60
19 B Chainage stones and Centre line stones each 35.20
(750x150x150xmm)
20 31 Demarcation Stones ( 900 x 150 x 150 each 66.70
mm)
21 32.a Guard Stones ( 1200 x 200 x 200 mm ) each 97.10
22 B Guide Stones ( 800 x 150 x150 mm ) each 66.70
23 C Carving letters and figures in stone up to each 7.60
100 mm size
24 D Carving letters and figures in stone above each 8.60
100 mm size
1
HARD BROKEN STONE OF GRANITE,
TRAP AND DOLERITE FREE FROM
DUST OBTAINED BY QUARRYING,
SPLITTING.
25 33.a - do - 6mm size (SS 5) 1 cum 480.00
26 b - do - 10mm size (SS 5) 1 cum 624.80
27 c - do - 12mm size (SS 5) 1 cum 742.90
28 d - do - 20mm size (SS 5) 1 cum 937.10
29 e - do - 25mm size (SS 5) 1 cum 899.10
30 f - do - 40mm size (SS 5) 1 cum 560.00
31 g - do - 50mm size (SS 5) 1 cum 434.30
32 h - do - 60mm size (SS 5) 1 cum 399.10
33 I - do - 65mm size (SS 5) 1 cum 361.00
34 j - do - 75mm size (SS 5) 1 cum 289.50
35 k - do - 75 to 100mm size (SS 5) 1 cum 236.20
36 NOTE:- (1) Add extra Rs. /- per cum for 70.00
items 33 (a) to 33 (k) if the metal is
obtained by blasting
37 (2) Add 25% extra per cum if the metal is 25%
obtained by machine crushing excluding
cost of blasting.
38 (3) Deduct Rs. /- per cum if the metal or 9.90
rubble is obtained from surface stone and
boulders.
39 (4) Add Rs. /- per cum for selection of 17.00
stones and boulders from excavated spoil
dumps for items 33 a to 33 k, when this
addition of Rs. /- per Cum is allowed,
deduction of Rs. /- per Cum mentioned
under Note (3) above should invariably be 9.90
made.
SOFT BROKEN STONE SCREENED AND
FREE FROM DUST
40 33.l - do - 40 mm size ( SS 5 ) 1 Cum 117.10
41 33.m - do - 50 mm size ( SS 5 ) 1 Cum 105.70
42 33.n - do - 60 mm size ( SS 5 ) 1 Cum 82.90
43 33.o - do - 65 mm size ( SS 5 ) 1 Cum 74.30
44 33.p - do - 75 mm size ( SS 5 ) 1 Cum 69.50
HARD BROKEN STONE OF GRANITE
TRAP DOLERITE AND DOLAMITE FREE
FROM DUST OBTAINED BY QUARRYING
SPLITTING (QUARTZITE AND BASALT
WITH AGGREGATE IMPACT OF LESS
THAN 20)
45 33a -do- 2.36 to 5 mm size (IRC&MORTH) 1 cum 293.30
46 b -do- 5 to 7mm size (IRC&MORTH) 1 cum 480.00
47 c -do- 9.5 to 11.2mm size (IRC&MORTH) 1 cum 624.80
48 d -do- 12mm to 14 mm size ( IRC and 1 cum 742.90
MORTH )
49 e -do- 19 mm to 22 mm size ( IRC and 1 cum 937.10
MORTH )
2
50 f -do- 25 mm to 27 mm size ( IRC and 1 cum 899.10
MORTH )
51 g -do- 40 mm to 45 mm size ( IRC and 1 cum 560.00
MORTH )
52 h -do- 50 mm to 55 mm size ( IRC and 1 cum 434.30
MORTH )
53 i -do- 60 mm to 63 mm size ( IRC and 1 cum 399.10
MORTH )
54 j -do- 65 mm size ( IRC and MORTH ) 1 cum 361.00
55 k -do- 75 mm size ( IRC and MORTH ) 1 cum 289.50
56 1 NOTE:- Add extra Rs. /- per cum for 1 cum 70.00
items 33 (a) to 33 (j) if the metal is
obtained by blasting
57 2 Add 25% extra per cum if the metal is 1 cum 25%
obtained by machine crushing excluding
cost of blasting.
58 3 Deduct Rs. /- per cum if the metal or 1 cum 9.90
rubble is obtained from surface stones and
boulders
59 4 Add Rs. /- per cum for selection of stones 1 cum 17.00
and boulders from excavated soil dumps
for items 33 (a) to 33 (k), when this
addition of Rs. /- per cum allowed
deduction of Rs. /- per cum mentioned
under note (3) above should invariably be 9.90
made
HARD BROKEN STONE OTHER THAN
GRANITE SUCH AS QUARTZ, QUARTZ-
NAPA AND BASALT SCREENED AND
FREE FROM DUST
60 33.q - do - 10 mm size (SS 5) 1 Cum 367.60
61 -do- 9.5 mm to 11.2 mm size ( IRC and 1 Cum 367.60
MORTH )
62 r - do - 12 mm size (SS 5) 1 Cum 344.80
63 -do- 12mm to 14 mm size ( IRC and 1 Cum 344.80
MORTH )
64 S - do - 20 mm size (SS 5) 1 Cum 279.10
65 -do- 19 mm to 22 mm size ( IRC and 1 Cum 279.10
MORTH )
66 T - do - 25 mm size (SS 5) 1 Cum 273.30
67 U - do - 40 mm size (SS 5) 1 Cum 161.90
MORTH )
69 V - do - 50 mm size (SS 5) 1 Cum 142.90
MORTH )
71 33.w - do - 65 mm size (SS 5) 1 Cum 135.20
MORTH )
73 X - do - 75 mm size (SS 5) 1 Cum 111.40
74 - do - 75 mm size ( IRC &MORTH) 1 Cum 111.40
75 Y - do - 75 to 100 mm size (SS 5) 1 Cum 87.60
76 - do - 75 to 100 mm ( IRC& MORTH) 1 Cum 87.60
OTHER ITEMS
3
77 33.z1 Laterite 40 to 75 mm ( ring) 1 Cum 96.20
78 z2 kankar, hard broken kankar 40 to 75 mm 1 Cum 71.40
( ring )
79 z3 Soling stone of 150 mm size of granite, 1 Cum 90.50
trap and Dolamite varieties.
80 NOTE:- (1) Add extra for items to 33(z3) 1 Cum 70.00
Rs /- Per cum, wherever quarrying is
done by blasting. (2) Wherever controlled
blasting is resorted to the Chief Engineer
concerned shall approve the observed data
in support of SS item No. 22 a to 22 c ,
22g, 23
81 z4 Soling stone of 150 mm size other than 1 Cum 62.90
granite variety
82 z5 Soling Stone laterite, Kankar 150mm, 1 Cum 39.10
surface stone
83 z6 Field picked metal unbroken 20 mm size 1 Cum 52.40
84 z7 - do - 25 mm size 1 Cum 40.00
85 z8 - do - 40 mm size 1 Cum 45.70
86 z9 - do - 50 mm size 1 Cum 40.00
87 z10 - do - 60 mm size 1 Cum 34.30
88 z11 - do - 80 mm size 1 Cum 30.50
89 NOTE:- Add Rs. /- Per Cum for selection of stone 17.00
and boulders from excavated spoil dumps for items
33 (Q) TO 33 Z , when this addition of Rs. /- per
Cum is allowed, deduction of Rs. /- per Cum
should invariably be made towards the metal or
rubble if it is obtained from surface stone and
boulders.
90 34 Gravel 1 Cum 98.00
91 35 a Quarry rubbish 1 Cum 77.10
92 B HBG Stone Chips 2.36mm and below 1 Cum 314.00
93 36.a Sand for mortar, plastering, ceiling coat 1 Cum 481.00
including washing screening etc.,
94 b. Sand for concrete 1 Cum 367.00
95 c. Sand for filling and blindage 1 Cum 271.00
96 37 Clay for puddle and masonry Items 38 (a) 1 Cum 35.00
to 39 (h) As per local prevailing rates
based on competitive quotations.
(C) LIME AND CEMENT
97 40 to As per Local
41(c ) prevailing
rates based on
competitive
rates
98 42 Cement excluding cost of empty cement 1 MT

bags
The monthly
rates will be
communicated
by Govt.
4
NOTE: (1) The rates are inclusive of sales tax. 2)As per the rates
applicable to the District. 3) Least of the (1) and (2 ) above may be
allowed 4) The price of cement will be reviewed and fixed on monthly
basis and rates will be communicated separately.
99 C Grinding lime mortar or Surkhi mortar 1 Cum 89.50
100 D Shell lime slaked and screened 1 Cum 895.20
101 E White cement 1 Kg. 23.40
102 (D) MORTARS
103 43 to Items 43 to 45 Rates have to be
45 worked out based on
MORT&H data.
(E) METAL AND IRON WORKS
104 Mild steel rods 6mm dia. 1 MT
105 Mild steel flats 1 MT
106 Mild Steel, Structural Steel, I.e., Angles, 1 MT
Channels and I sections. The monthly
107 High Yield Strength Deformed Bars/TMT 1 MT rates will be
bars communicated
108 Mild steel plates 1 MT by Govt.
NOTE: (1) The rates are inclusive of sales tax. 2)As per the
rates applicable to the District. 3) Least of the (1) and (2 )
above may allowed 4) The prices of steel will be reviewed and
fixed on monthly basis and rates will be communicated
separately.
III RATES OF WORKS
(A) CLEARING SITE
109 1.a Clearing heavy Jungle 1 Sqm 2.90
110 B Clearing light Jungle 1 Sqm 2.60
111 C Clearing Scrub Jungle 1 Sqm 2.60
112 D Clearing Juliflora (Prosafis) jungle including 1 Sqm 3.70
up-rooting and removing of Juliflora
stumps.
113 2.a.I Cutting and removing Palmyrah trees Each 19.00
including stacking of girth 30 to 100 cm.
114 Ii - do - 100 to 200 cm. Each 44.00
115 2.b.I Uprooting and removing Palmyrah stumps Each 46.00
including stacking of girth 30 to 100 cm.
116 Ii - do - 100 to 200 cm. Each 48.00
117 2.c.I Cutting and removing date trees including Each 24.00
stacking of girth 30 to 100 cm
118 Ii - do - 100 to 200 cm Each 35.00
119 d.I Uprooting and removing stumps of date Each 24.00
trees including stacking of girth 30 to 100
cm.
120 Ii - do - 100 to 200 cm Each 30.00
121 eI Cutting and removing other kind of trees Each 30.00
including stacking of girth 30 to 100 cm
122 Ii - do - 100 to 200 cm Each 46.00
123 iii - do - above 200 cm Each 75.00
124 f.I Uprooting and removing stumps of other Each 24.00
kind of trees including stacking of girth 30
to 100 cm.
125 Ii - do - 100 to 200 cm Each 33.00
5
126 iii - do - above 200 cm Each 41.00
127 3.a Uprooting and clearing prickly pear jungle 1 Sqm 2.30
128 B - do - under 2.5 meters height including 1 Sqm 3.00
burning and burrying as directed.
129 C - do - over 2.5 meters height including 1 Sqm 3.50
burning and burrying with an initital lead of
conveyance
130 4.a Removing of natchu, goobi, thooti etc., 1 Sqm 1.90
from drains, channels including clearance if
not more than 1 metre depth of water with
an initial lead of 10 metresand lift of 2
metres.
131 b.I Clearing alchi, tilla 1 Sq.m 3.80
132 b.ii Removal of Jammu 1 Sq.m 3.30
133 c.I Removal of imponea, cornea 1 Sq.m 3.60
134 c.ii Removal of water hyacinth upto 30 cm 1 Sqm 3.70
thick.
135 c.iii - do - more than 30 cm thick 1 Sq.m 5.00
136 D Removal of natchu, goobi, thooti etc., for 1 Sqm 1.40
every extra lead or lift over the initial lead
or lift.
(B) DISMANTLING
5 DISMANTLING, CLEARING AWAY AND
CAREFULLY STACKING MATERIALS
USEFUL FOR REUSE.
137 n.(i) Dry rough stone revetment for aprons and 1 cum 62.50
stacking within 40 metres
7 Drilling holes in hard granite or sheet
rock
a) Manually ( Hand)
138 I) 20 mm dia meter 1 RM 124.00
139 ii) 25 mm dia meter 1 RM 131.00
140 iii) 36 mm dia meter 1 RM 151.00
141 b) Pneumatic Compressor
142 I) 20 mm dia meter 1 RM 140.00
8 Grouting the holes with neat cement
slurry excluding cost of steel
145 I) 20 mm dia meter 1 RM 88.00
White Washing and Painting works
148 AI White washing and colour banding for each 8.60
guard and guide stones including cost of
materials
149 BI Screening sand and gravel 1 cum 9.30
150 B2 Screening chips and metal 1 cum 16.00
151 C1 Removing and refixing Hectometre or each 11.50
Demarcation stones
6
(S ) ROAD WORK ITEMS
PICKING OLD METALLED SURFACE TO
DEPTH OF 40 TO 100 mm SPREADING
OLD METAL AND NEW METAL
SECTIONING INCLUDING EDGEBUNDS
AND SUBGRADE ROLLING, SPREADING
METAL INCLUDING BLINDAGE
OFGRAVEL WATERING WITH AN
INITIAL LEAD OF 2 HECTOMETERS
AND HAND ROLLER ( 1.5 TO 2
TONNES) ROLLING ETC., INCLUDING
BARRICADING, DIVERSION OF
TRAFFIC AND WETTING THE NEW
CONSOLIDATION FOR A FORTNIGHT
COMPLETE
( For a compact thickness )
1 (I ) HARD METAL
152 A 40 mm thickness 10 sqm 70.00
153 B 50 mm thickness 10 sqm 74.00
154 C 75 mm thickness 10 sqm 80.30
155 D 100 mm thickness 10 sqm 87.00
156 1 (ii ) (For compact thickness of soft metal)
157 A 50 mm thickness 10 sqm 53.80
158 B 75 mm thickness 10 sqm 63.90
159 C 100 mm thickness 10 sqm 70.10
5 Picking old metalled surface to a depth
of 40 to 100 mm and spreading metal
including watering with an initial lead
of 2 Hectometers and rolling with
power rollers watering and spreading
gravel for blindage and power roller
rolling including hire charges of power
roller( 8 to 10 T ) barricading and
diversion of traffic and wetting the
new consolidation for a fortnight(for
compacted thickness of )
HARD METAL
160 5 (a) 40 mm thick ness 10 sqm 185.00
161 (b) 50 mm thick ness 10 sqm 210.00
162 (c ) 75 mm thick ness 10 sqm 231.30
163 (d ) 100 mm thick ness 10 sqm 248.80
164 (e) 150 mm thick excluding hire charges 10 sqm 445.40
165 Gelatin(For MORTH data, for works of state Per Kg 57.00
& national high ways only)
166 Electric Detonators(For MORTH data, for each 9.40
works of state & national high ways only)
167 Hot applied thermoplastic compound(For Per Rate as per
MORTH data, for works of state & national Litre local
high ways only) competitive
quotations
7
168 Reflectionising glass beads of 2 mm Per Kg 62.60
thick(For MORTH data, for works of state &
national high ways only)
169 Road marking paint confirming to IS Per Kg 153.30
164(For MORTH data, for works of state &
national high ways only)
170 n Labour charges for laying filters with coarse 1 cum 55.30
aggregate.
171 o Labour charges for laying filter with sand. 1 cum 30.70
New Items.
172 Fly Ash 1 cum Deleted
173 Binding wire 1 Kg. 60.00
8
HIRE CHARGES OF PLANT
AND MACHINERY
9
HIRE CHARGES OF PLANT& MACHNIERY FOR
ROAD & BRIDGE WORKS FOR THE YEAR 2013-14
Sl. Description Unit SoRate

No. for
2013-14
Machine Activity ( Rupees)
1 2 3 4 5
1 Dozer( D 80 ) Spreading Per Hour 2135.50
Cutting
Cleaning
2 Dozer( D 50 ) Spreading Per Hour 1336.10
Cutting
Cleaning
3 Mortor Grader Clearing Per Hour 2736.90
Spreading
GSB
WMM
4 Hydraulic Excavator Soil Ordinary Per Hour 2380.40
Soil Marshy
Soil unsuitable
5 Front end loader Soil loading Per Hour 1425.40
Aggregate loading Per Hour
6 Tipper- 5.5 Cum Transportation of soil, Per Hour 779.30
GSB,WMM, Hot mix etc
7 Vibratory roller 8 tonne Earth/Soil, GSB, Per Hour 2246.80

WMM
8 Smooth wheeled roller 8 Soil compaction ,BM Per Hour 995.20
tonne compaction
9 Water tanker 8 Kilolitre Water transport Per Hour 767.80
10 Water tanker 6 Kilolitre Water transport Per Hour 577.40
11 Tractor Pulling Per Hour 371.60

12 Tractor with rotavator/ Scarifying Per Hour 377.90
Grader
13 Tractor with ripper Scarifying Per Hour 377.90
attachment
14 Air Compressor 5 cmm General purpose Per Hour 475.70
(electric)
15 Wet mix plant 60 TPH Wet mix Per Hour 1478.40
16 Mechanical broom Surface cleaning Per Hour 320.70
Hydraulic
17 Bitumen Pressure Applying bitumen tack Per Hour 1345.50
Distributor coat
18 Emulsion Pressure Applying emulsion tack Per Hour 772.50
Distributor coat
10
19 Hot mix Plant – 120 DBM/BM/SDC Per Hour 25306.80
TPH capacity /Premix
20 Hot mix Plant – 100 DBM/BM/SDC Per Hour 21710.40
TPH capacity /Premix
21 Hot mix Plant – 60 TPH DBM/BM/SDC Per Hour 19462.20
capacity /Premix
22 Hot mix Plant – 40 to DBM/BM/SDC Per Hour 17173.60
60 TPH capacity /Premix
23 Paver Finisher DBM/BM/SDC Per Hour 2631.70
Hydrostatic with sensor
control 100 TPH /Premix
24 Paver finisher Paving of WMM, paving of Per Hour 2020.00
Mechanical 100 DLC
25 Hydraulic Chip Spreader Surface dressing Per Hour 2305.70
26 Tandem Road roller Rolling of Asphaltic Per Hour 1582.70

surface
27 Pneumatic Road roller Rolling of Asphaltic Per Hour 1233.70
surface
28 Pot-Hole repair machine Repair of pot-holes Per Hour 759.00
29 Bitumen boiler oil fired Bitumen Spraying Per Hour 187.70

30 GSB Plant 50 Cum Producing GSB Per Hour 1026.60
31 Mastic Cooker Mastic wearing coat Per Hour 58.40
32 Batching and Mixing Concrete mixing Per Hour 1118.80
Plant (a) 50 Cum
capacity
(b) 15 - 20 Cum Concrete mixing Per Hour 949.00
capacity
33 Transit mixer Transportation of concrete Per Hour 1652.90
mix
34 Concrete pump of 45 Pumping of Concrete Per Hour 684.10
and 30 cum
35 Cranes (Non Hydraulic)
(a) 80 tonnes Lifting purpose Per Hour 1051.80

(b) 35 tonnes 710.50
(c) 3 tonnes 316.20
(d)Crane with grab Well foundation Per Hour 1940.10
bucket 0.75 cum
(e)Crane with grab Well foundation Per Hour 3172.40
bucket 1 cum
36 Concrete bucket 1.50 For pouring concrete Per Hour 12.70
cum
37 Kerb casting machine Kerb making Per Hour 279.30
38 Concrete mixer / Mix all Concrete mixing Per Hour 397.00
(a)0.28 cum
(b) 1.0 cum Concrete mixing Per Hour 619.30
39 Piling rig with bantonite 0.75 m dia to 1.20 m dia Per Hour 4917.70
pump boring attachment
11
40 Concrete paver finisher Paving of concrete surface Per Hour 2604.80
with 40 HP motor
41 Integrated stone Crushing of spalls 100 TPH Per Hour 7825.10

crusher
Crushing of spalls 200 TPH Per Hour 16499.00
42 Pre stressing jack with Stressing of steel wires/ Per Hour 126.70
pump and access stands
43 Generator
250 KVA Generation of electric per hour 1819.30
125 KVA energy per hour 1298.10
100 KVA per hour 1107.30
30 KVA per hour 752.00
44 Pneumatic sinking of Pneumatic sinking of wells Per K.m. 50.30
Plants
45 Truck 5.5 cum per 10 Material transport Per Hour 753.00
tonnes
46 Road marking machine Road marking Per Hour 99.70
47 Mobile slurry seal Mixing and laying slurry Per Hour 1011.40
equipment seal
48 Plate compacter For compacting in Per Hour 43.10
medians
49 Drilling equipment For drilling Per Hour 705.80
Note: The above hire charges of machinery & plant includes crew, oils,
conveyance of machinery to site and all other incidental charges.
12
PUBLIC HEALTH ITEMS
1. S o R FOR R.C.C. PLAIN ENDED PIPES
Sl.
Description
No.
1 2
Manufacture, Supply and Delivery of R.C.C. Plain ended pipes conforming to
1 B.I.S 458/2003 , Ex-factory, Excluding transportation, taxes & duties
Size Unit Revised SoR For 2013-14

NP - 2 Class NP - 3 Class NP - 4 Class
80 mm dia Meter 121
100 mm dia Meter 140
300 mm dia Meter 327 759 774
350 mm dia Meter 407 919 936
400 mm dia Meter 469 1014 1037
450 mm dia Meter 575 1163 1174
500 mm dia Meter 629 1260 1453
600 mm dia Meter 934 1902 2254
700 mm dia Meter 1193 2363 3024
800 mm dia Meter 1467 3121 3943
900 mm dia Meter 1850 3922 4919
1000 mm dia Meter 2256 4877 6735
1100 mm dia Meter 2664 5753 7806
1200 mm dia Meter 3175 6778 9127
1400 mm dia Meter 4338 8743 12609
1600 mm dia Meter 5007 11349 15092
1800 mm dia Meter 6581 15052 20241
The above rates of RCC Plain ended pipes are based on the following raw materials
Cost Cement. Rs.3197/- per MT (excluding all taxes and freight).
Steel (M.S. Rods) - Rs.36139/- per MT. (excluding all taxes and freight).
1
2. S o R FOR R.C.C. COLLARS
Sl.No. Description
1 2
Manufacture, Supply and Delivery of R.C.C. Collars conforming to B.I.S.
1 458/2003 (rate per each collar) suitable for R.C.C. Plain ended pipes
including transportation but excluding taxes & duties
80 mm dia Each 37.00
300 mm dia Each 83.00 117.00 117.00
350 mm dia Each 102.00 146.00 146.00
400 mm dia Each 113.00 167.00 167.00
450 mm dia Each 177.00 223.00 223.00
500 mm dia Each 201.00 265.00 265.00
600 mm dia Each 272.00 348.00 348.00
700 mm dia Each 354.00 467.00 467.00
800 mm dia Each 500.00 595.00 595.00
900 mm dia Each 598.00 694.00 694.00
1000 mm dia Each 698.00 866.00 866.00
1100 mm dia Each 854.00 1098.00 1098.00
1200 mm dia Each 1037.00 1375.00 1375.00
1400 mm dia Each 1337.00 1741.00 1741.00
1600 mm dia Each 1708.00 2230.00 2230.00
1800 mm dia Each 1750.00 2872.00 2872.00
The above rates of RCC Collars suitable to plain ended pipes are based on the following raw
materials cost.
2
3. S o R FOR R.C.C. S/S PIPES (Non - Pressure)
Sl.
Description
No.
1 2
Manufacture, Supply and Delivery of R.C.C. Socket and Spigot pipes
1 conforming to B.I.S. 458/2003 at ex-factory (rate per meter of
effective length) Excluding transportation, taxes & duties.
80 mm dia Meter 150

Meter 396 971 1030
300 mm dia
350 mm dia Meter 510 1220 1240
400 mm dia Meter 561 1352 1375
450 mm dia Meter 699 1492 1503
500 mm dia Meter 806 1706 1854
600 mm dia Meter 1133 2393 2442
700 mm dia Meter 1467 3058 3174
800 mm dia Meter 1886 4048 4138
900 mm dia Meter 2387 5089 5212
1000 mm dia Meter 2907 5733 6175
1100 mm dia Meter 3394 6767 7132
1200 mm dia Meter 3839 7988 8348
1400 mm dia Meter 5489 10577 11841
1600 mm dia Meter 6793 13738 14184
1800 mm dia Meter 7592 18221 19035
The above rates of RCC S/S Non-Pressure pipes are based on the following raw
materials cost.
3
4. S o R FOR R.C.C. S/S PIPES (Pressure)
Sl.No. Description
1 2
Manufacture, Supply and Delivery of R.C.C. Socket and Spigot
1 pipes conforming to B.I.S. 458/2003 Ex-factory (rate per meter of
effective length) Excluding transportation, taxes & duties.

P1 - Class P2 - Class P3 - Class
80 mm dia Meter 199 224 254
100 mm dia Meter 224 267 309
150 mm dia Meter 309 399 492
200 mm dia Meter 358 515 680
225 mm dia Meter 403 585 757
250 mm dia Meter 442 624 793
300 mm dia Meter 595 898 1118
350 mm dia Meter 741 1251 1615
400 mm dia Meter 880 1658 2135
450 mm dia Meter 937 1965 2626
500 mm dia Meter 1252 2130 2981
600 mm dia Meter 1713 3176 4134
700 mm dia Meter 2284 4182 5245
800 mm dia Meter 2859 4962 6335
900 mm dia Meter 3447 5829
1000 mm dia Meter 4360 6684
1200 mm dia Meter
6129
The above rates of RCC S/S Pressure pipes are based on the following raw materials cost.
4
8. S o R FOR A.C. PIPES
Sl.No Description
Manufacture, Supply of A.C. Pressure pipes (mazza process) as per BIS No: 1592/2003
as amended from time to time duly marked with BIS mark, including cost of material,
incidental handling, loading and packing charges but are exclusive of transportation,
1
unloading, stacking at departmental stores, and excluding excise duty, VAT octroi
and other govt. Levies. The pipes shall be tested at factory premises confirming to is
code 1592/2003.
Class - 15 Class - 20 Class - 25

80 mm dia Rate/Meter 147 160 201
300 mm dia Rate/Meter 1060 1373 1752
350 mm dia Rate/Meter 1295 1681 2114
400 mm dia Rate/Meter 1685 2195 2725
450 mm dia Rate/Meter 1986 2632 3297
500 mm dia Rate/Meter 2462 3222 4047
600 mm dia Rate/Meter 3496 4557 5808
700 mm dia Rate/Meter 4678 6345 8205
750 mm dia Rate/Meter 5331 7325 9389
800 mm dia Rate/Meter 6099 8299 10651
850 mm dia Rate/Meter 6842 9336 11994
900 mm dia Rate/Meter 7628 10430 13415
1000 mm dia Rate/Meter 9416 12804 16498
1. The above rates of AC Pipes are based on the Cement cost of RS 3197/- per MT
(excluding all taxes and freight).
2. The above rates of AC pipes are based on the Fiber cost of Rs 53280/- per M.T (Excluding
all taxes & Frieght)
5
9. S o R FOR A.C. COUPLINGS
Sl.
Description
No.
1 2
Manufacture, Supply of A.C Couplings suitable to A.C. Pressure pipes (mazza
process) as per BIS: 1592/2003 excluding cost of rubber rings to suit AC
1 pressure pipes including cost of material, incidental handling, packing,
transportation and unloading at site transit risk, but excluding excise duty, VAT
and other govt. Levies and testing of joints as per IS Code.
0
Class - 15 Class - 20 Class – 25
80 mm dia Rate/Each 76 80 93
400 mm dia Rate/Each 796 1041 1338
450 mm dia Rate/Each 955 1259 1621
500 mm dia Rate/Each 1139 1524 1950
600 mm dia Rate/Each 1378 1720 2201
700 mm dia Rate/Each 1840 2476 3221
750 mm dia Rate/Each 2076 2837 3662
800 mm dia Rate/Each 2354 3192 4131
850 mm dia Rate/Each 2623 3571 4630
900 mm dia Rate/Each 2902 3970 5154
1000 mm dia Rate/Each 3542 4827 6291
1. The above rates of AC Coupling are based on the Cement cost of RS 3197/- per MT (Excluding
all taxes and freight).
2. The above rates of AC Coupling are based on the Fiber cost of Rs 53280/- per M.T (Excluding all
taxes & Frieght)
6
Public Health Items
11. S o R FOR PRE-STRESSED (NON-CYLINDER) CONCRETE PIPES FOR THE YEAR 2013-14
Sl.No. Description
1 2
Manufacture, Supply, Delivery of Pre-stressed (Non-cylinder) concrete pipes conforming to IS 784/2001 ex-factory excluding
1 transportation, taxes & duties., for the following Field/Site Test Pressures.(The manufacture shall design the pipes as per the IS
Code 784-2001)
Rs. Rs. Rs. Rs. Rs. Rs.
6 Kg/cm2 8 Kg/cm2 10 Kg/cm2 12 Kg/cm2 14 Kg/cm2 16 Kg/cm2
350 MM DIA Metre 2429 2438 2448 2456 2506 2594
400 MM DIA Metre 2603 2623 2652 2682 2730 2770
450 MM DIA Metre 2726 2736 2766 2816 2889 2950
500 MM DIA Metre 2949 2959 2978 3039 3101 3194
600 MM DIA Metre 3380 3399 3428 3530 3644 3757
700 MM DIA Metre 4175 4183 4244 4334 4488 4596
800 MM DIA Metre 4913 4952 5074 5184 5392 5561
900 MM DIA Metre 5691 5718 5840 6075 6311 6733
1000 MM DIA Metre 6680 6717 6899 7166 7506 7883
1100 MM DIA Metre 7572 7661 7864 8297 8630 9042
1200 MM DIA Metre 8358 8478 8922 9333 10239 10674
1300 MM DIA Metre 9457 9993 10541 11098 12047 13151
1400 MM DIA Metre 10837 11458 12107 13139 14011 14775
1500 MM DIA Metre 12660 13393 14126 15311 16212 17078
1600 MM DIA Metre 14246 15082 15919 18023 18372 19354
1700 MM DIA Metre 14981 15569 16390 18427 20543 21387
1800 MM DIA Metre 16072 17122 18020 19833 22117 23071
1900 MM DIA Metre 17191 18152 19714 20871 22725 25308
2000 MM DIA Metre 18868 20075 21079 23194 26450 28421
Note: a) The above rate of PSC pipes are based on the HT wire cost of Rs.49320/-MT (Excluding taxes).
7
Public Health Items
and cement price of Rs.3197/- per MT (Excluding all taxes and freight)
12. S o R FOR PRE-STRESSED (CYLINDER) CONCRETE PIPES FOR THE YEAR 2013-14
Sl
Description
No.
1 2
Pre-stressed (Cylinder type ) concrete pipes conforming to IS 784/2001 @ ex-factory cost of pipes, excluding transportation, laying, jointing,
1 testing, bends, tees, specials, taxes & duties for the following Field/Site Test Pressures.(The manufacture shall design the pipes as per the IS
Code 784-2001)
8 10 12 14 16 18 20
4 Kg/cm2 6 Kg/cm2
Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2 Kg/cm2
400 MM DIA Meter 4,523 4,523 4,523 4,523 4,546 4,591 4,669 4,744 4,801
450 MM DIA Meter 4,910 4,910 4,910 4,932 4,988 5,056 5,155 5,221 5,301
500 MM DIA Meter 5,368 5,368 5,380 5,449 5,514 5,601 5,681 5,802 5,891
600 MM DIA Meter 6,369 6,413 6,493 6,603 6,702 6,803 6,959 7,102 7,247
700 MM DIA Meter 7,352 7,463 7,597 7,740 7,875 8,007 8,172 8,384 8,540
800 MM DIA Meter 8,623 8,779 8,967 9,155 9,324 9,500 9,712 9,937 10,194
900 MM DIA Meter 10,198 10,398 10,629 10,864 11,097 11,307 11,588 11,865 12,143
1000 MM DIA Meter 11,808 12,073 12,352 12,642 12,928 13,164 13,494 13,832 14,181
1100 MM DIA Meter 13,086 13,402 13,737 14,034 14,351 14,640 14,999 15,378 16,209
1200 MM DIA Meter 14,823 15,191 15,562 15,931 16,311 16,649 17,070 17,901 18,497
1300 MM DIA Meter 16,480 16,903 17,335 17,766 18,208 18,597 19,593 20,128 20,794
1400 MM DIA Meter 18,061 18,542 19,045 19,549 20,051 21,047 21,663 22,300 23,708
1500 MM DIA Meter 19,581 20,114 20,646 21,168 22,276 22,880 23,797 25,166 26,892
1600 MM DIA Meter 22,097 22,691 23,295 24,422 25,108 25,794 27,503 28,261 28,999
1700 MM DIA Meter 23,759 24,446 25,172 26,463 27,241 28,696 30,005 30,825 31,604
1800 MM DIA Meter 26,021 26,737 28,139 29,008 29,857 31,454 32,846 33,828 34,810
1900 MM DIA Meter 30,478 31,296 32,861 33,821 35,480 36,839 38,090 39,186 40,221
8
Public Health Items
2000 MM DIA
Meter 32,462 34,020 35,074 36,159 38,053 39,201 40,972 42,232 43,348
Note: The rates of PCCP pipes which were incorporated in the SSR are based on the following raw materials cost.
HT Wire: - Rs.49320/- (Excluding all taxes & freight)
HR Coil (Hot Rolled): - Rs.41241/- (Excluding all taxes & freight)
Cement Cost Rs. 3197/-.per MT (Excluding all duties, taxes & freight)
9
Public Health Items
13. S o R FOR BAR WRAPPED STEEL CYLINDRICAL (BWSC) PIPES FOR THE YEAR 2013-14
Sl.
Description
No
1 2
Bar Wrapped Steel Cylindrical (BWSC) pipes conforming to IS 15155 - 2002, ex-factory excluding transportation, taxes and duties etc., for bar
1
wrapped steel cylindrical pipes for the following Field/Site Test Pressures.(The manufacture shall design the pipes as per the IS Code 784-2001)
Size Unit Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs. Rs.
4 -12 14 16 18 20 22 24 26 28 30
2 2 2 2 2 2 2 2 2
Kg/cm Kg/cm Kg/cm Kg/cm Kg/cm Kg/cm Kg/cm Kg/cm Kg/cm Kg/cm2
250 MM DIA Meter 2648 2,648 2,648 2,648 2,648 2,648 2,649 2,681 2,703 2,852
300 MM DIA Meter 2974 2,974 2,974 2,974 2,974 3,010 3,085 3,198 3,255 3,435
350 MM DIA Meter 3612 3,612 3,612 3,630 3,657 3,688 3,776 3,907 4,015 4,206
400 MM DIA Meter 3958 3,958 3,977 4,023 4,059 4,243 4,406 4,572 4,746 5,376
450 MM DIA Meter 4355 4,369 4,423 4,463 4,677 4,862 5,080 5,276 5,484 5,983
500 MM DIA Meter 4872 4,918 4,976 5,206 5,461 5,716 5,987 6,218 6,637 7,082
600 MM DIA Meter 6431 6,507 6,582 6,955 7,321 7,625 8,021 8,386 8,902 9,391
700 MM DIA Meter 7766 7,917 8,441 8,949 9,445 9,981 10,682 11,082 11,628 12,156
800 MM DIA Meter 8821 9,462 10,109 10,744 11,406 12,293 12,997 13,971 14,664 15,651
900 MM DIA Meter 10904 11,281 12,117 12,942 13,743 14,378 15,894 16,962 17,776 19,062
1000 MM DIA Meter 12309 13,413 14,319 15,259 16,269 17,786 19,422 20,796 21,861 23,527
1100 MM DIA Meter 17668 17,986 18,092 19,832 21,804 23,213 25,681 27,101 28,847 31,524
1200 MM DIA Meter 19546 20,096 20,767 22,853 25,101 27,163 29,481 30,568 34,224 37,864
Note: The above rates of BWSC pipes are based on the following raw materials' cost.
HR Plates - Rs.41241/- per MT (Excluding all taxes)
Wire rods - Rs.39116/- per MT (Excluding all taxes)
10
Public Health Items
Cement Cost Rs. 3197/-.per MT (Excluding all duties, taxes & freight)
11
14. S o R FOR M.S. PIPES FOR THE YEAR 2013-14
Thicknes
Sl.No. Description Unit Rate (Rs.)
s in mm
1 2 3 4 5
1 Manufacture, supply and delivery of M.S
Pipes conforming to is 3589/2001 including
in lining with cement mortar (1:2) 15mm
thick using 4 numbers of 6mm dia
M.S.Rings at each end of the pipe and out
coating with cement mortar (1:3) 30mm
thick by shortcreting or gunetting duly
providing wire mesh of size 50x50x3mm
including cost of all materials, labour
charges, transportation to anywhere in AP,
but excluding taxes & duties, etc.
500 mm dia Meter 7497.00
8.00
600 mm dia Meter 8.00 8944.00
700 mm dia Meter 8.00 10441.00

700 mm dia Meter 10.00 12938.00
800 mm dia Meter 8.00 11993.00

800 mm dia Meter 10.00 13733.00
800 mm dia Meter 12.00 16227.00
900 mm dia 8.00 13386.00

900 mm dia Meter 10.00 15342.00
900 mm dia Meter 12.00 17302.00
1000 mm dia Meter 8.00 15044.00

1000 mm dia Meter 10.00 17209.00
1000 mm dia Meter 12.00 19293.00
1000 mm dia Meter 14.00 22250.00
1100 mm dia Meter 8.00 17847.00

1100 mm dia Meter 10.00 20230.00
1100 mm dia Meter 12.00 22616.00
1100 mm dia Meter 14.00 26097.00
1100 mm dia Meter 16.00 29592.00
1200 mm dia Meter 8.00 20235.00

1200 mm dia Meter 10.00 22826.00
12
1200 mm dia Meter 12.00 25427.00
1200 mm dia Meter 14.00 28042.00
1200 mm dia Meter 16.00 31787.00
1200 mm dia Meter 18.00 35543.00
1300 mm dia Meter 8.00 22100.00

1300 mm dia Meter 10.00 24905.00
1300 mm dia Meter 12.00 27720.00
1300 mm dia Meter 14.00 30541.00
1300 MM DIA Meter 16.00 33377.00
1300 MM DIA Meter 18.00 37309.00
1300 MM DIA Meter 20.00 41254.00
1400 MM DIA Meter 8.00 23494.00

1400 MM DIA Meter 10.00 26510.00
1400 MM DIA Meter 12.00 29538.00
1400 MM DIA Meter 14.00 32578.00
1400 MM DIA Meter 16.00 35623.00
1400 MM DIA Meter 18.00 39813.00
1400 MM DIA Meter 20.00 44015.00
1400 MM DIA Meter 22.00 48227.00
1500 MM DIA Meter 8.00 25148.00

1500 MM DIA Meter 10.00 28383.00
1500 MM DIA Meter 12.00 31620.00
1500 MM DIA Meter 14.00 34872.00
1500 MM DIA Meter 16.00 38132.00
1500 MM DIA Meter 18.00 41394.00
1500 MM DIA Meter 20.00 45749.00
1500 MM DIA Meter 22.00 50116.00
1500 MM DIA Meter 24.00 54495.00
1600 MM DIA Meter 8.00 26557.00

1600 MM DIA Meter 10.00 29985.00
1600 MM DIA Meter 12.00 33440.00
1600 MM DIA Meter 14.00 36904.00
1600 MM DIA Meter 16.00 40376.00
1600 MM DIA Meter 18.00 43855.00
1600 MM DIA Meter 20.00 48461.00
1600 MM DIA Meter 22.00 53082.00
1600 MM DIA Meter 24.00 57712.00
1600 MM DIA Meter 26.00 62353.00
1700 MM DIA Meter 8.00 28196.00

1700 MM DIA Meter 10.00 31853.00
13
1700 MM DIA Meter 12.00 35520.00
1700 MM DIA Meter 14.00 39197.00
1700 MM DIA Meter 16.00 42879.00
1700 MM DIA Meter 18.00 46575.00
1700 MM DIA Meter 20.00 51465.00
1700 MM DIA Meter 22.00 56369.00
1700 MM DIA Meter 24.00 61280.00
1700 MM DIA Meter 26.00 66206.00
1700 MM DIA Meter 28.00 71141.00
1800 MM DIA Meter 8.00 29850.00

1800 MM DIA Meter 10.00 33721.00
1800 MM DIA Meter 12.00 37601.00
1800 MM DIA Meter 14.00 41494.00
1800 MM DIA Meter 16.00 45386.00
1800 MM DIA Meter 18.00 49296.00
1800 MM DIA Meter 20.00 53211.00
1800 MM DIA Meter 22.00 58268.00
1800 MM DIA Meter 24.00 63337.00
1800 MM DIA Meter 26.00 68414.00
1800 MM DIA Meter 28.00 73505.00
1800 MM DIA Meter 30.00 78604.00
1900 MM DIA Meter 8.00 30260.00

1900 MM DIA Meter 10.00 35328.00
1900 MM DIA Meter 12.00 39417.00
1900 MM DIA Meter 14.00 43520.00
1900 MM DIA Meter 16.00 47632.00
1900 MM DIA Meter 18.00 51754.00
1900 MM DIA Meter 20.00 55879.00
1900 MM DIA Meter 22.00 61185.00
1900 MM DIA Meter 24.00 66501.00
1900 MM DIA Meter 26.00 71830.00
1900 MM DIA Meter 28.00 77167.00
1900 MM DIA Meter 30.00 82518.00
1900 MM DIA Meter 32.00 87876.00
2000 MM DIA Meter 8.00 31643.00

2000 MM DIA Meter 10.00 36934.00
2000 MM DIA Meter 12.00 41241.00
2000 MM DIA Meter 14.00 45555.00
2000 MM DIA Meter 16.00 49878.00
2000 MM DIA Meter 18.00 54214.00
2000 MM DIA Meter 20.00 58550.00
2000 MM DIA Meter 22.00 62861.00
14
2000 MM DIA Meter 24.00 68312.00
2000 MM DIA Meter 26.00 73772.00
2000 MM DIA Meter 28.00 79246.00
2000 MM DIA Meter 30.00 84726.00
2000 MM DIA Meter 32.00 90220.00
2000 MM DIA Meter 34.00 95722.00
2100 MM DIA Meter 8.00 33285.00

2100 MM DIA Meter 10.00 38801.00
2100 MM DIA Meter 12.00 43321.00
2100 MM DIA Meter 14.00 47837.00
2100 MM DIA Meter 16.00 52385.00
2100 MM DIA Meter 18.00 56930.00
2100 MM DIA Meter 20.00 61484.00
2100 MM DIA Meter 22.00 66048.00
2100 MM DIA Meter 24.00 71774.00
2100 MM DIA Meter 26.00 77509.00
2100 MM DIA Meter 28.00 83255.00
2100 MM DIA Meter 30.00 89010.00
2100 MM DIA Meter 32.00 94778.00
2100 MM DIA Meter 34.00 100555.00
2100 MM DIA Meter 36.00 106342.00
2200 MM DIA Meter 8.00 34625.00

2200 MM DIA Meter 10.00 40408.00
2200 MM DIA Meter 12.00 45143.00
2200 MM DIA Meter 14.00 49880.00
2200 MM DIA Meter 16.00 54632.00
2200 MM DIA Meter 18.00 59387.00
2200 MM DIA Meter 20.00 64155.00
2200 MM DIA Meter 22.00 68934.00
2200 MM DIA Meter 26.00 80887.00
2200 MM DIA Meter 28.00 93604.00
2200 MM DIA Meter 30.00 99617.00
2200 MM DIA Meter 32.00 105642.00
2200 MM DIA Meter 34.00 111676.00
2200 MM DIA Meter 36.00 117723.00
2200 MM DIA Meter 38.00 122970.00
2300 MM DIA Meter 10.00 42275.00

2300 MM DIA Meter 12.00 47221.00
2300 MM DIA Meter 16.00 57133.00
2300 MM DIA Meter 18.00 62107.00
2300 MM DIA Meter 20.00 67088.00
2300 MM DIA Meter 22.00 72075.00
15
2300 MM DIA Meter 26.00 84566.00
2300 MM DIA Meter 28.00 90825.00
2300 MM DIA Meter 30.00 97099.00
2300 MM DIA Meter 32.00 103380.00
2300 MM DIA Meter 34.00 109672.00
2300 MM DIA Meter 36.00 115975.00
2300 MM DIA Meter 38.00 122289.00
2300 MM DIA Meter 40.00 128611.00
2400MM DIA Meter 10.00 43880.00

2400 MM DIA Meter 12.00 49039.00
2400 MM DIA Meter 14.00 55093.00
2400 MM DIA Meter 16.00 60271.00
2400 MM DIA Meter 18.00 65453.00
2400 MM DIA Meter 20.00 70649.00
2400 MM DIA Meter 22.00 76656.00
2400 MM DIA Meter 26.00 81859.00
2400 MM DIA Meter 28.00 87436.00
2400 MM DIA Meter 30.00 93023.00
2400 MM DIA Meter 32.00 98617.00
2400 MM DIA Meter 34.00 104219.00
2400 MM DIA Meter 36.00 109834.00
2400 MM DIA Meter 38.00 115454.00
2400 MM DIA Meter 40.00 115120.00
2400 MM DIA Meter 42.00 120755.00
2500 MM DIA Meter 10.00 45752.00

2500 MM DIA Meter 14.00 56502.00
2500 MM DIA Meter 16.00 61891.00
2500 MM DIA Meter 18.00 67288.00
2500 MM DIA Meter 20.00 72693.00
2500 MM DIA Meter 22.00 78108.00
2500 MM DIA Meter 28.00 98405.00
2500 MM DIA Meter 30.00 105192.00
2500 MM DIA Meter 34.00 118796.00
2500 MM DIA Meter 36.00 125615.00
2500 MM DIA Meter 38.00 132444.00
2500 MM DIA Meter 40.00 139283.00
2500 MM DIA Meter 42.00 146133.00
2500 MM DIA Meter 44.00 152993.00
2500 MM DIA Meter 46.00 159864.00
2600 MM DIA Meter 12.00 52937.00

2600 MM DIA Meter 14.00 58533.00
2600 MM DIA Meter 16.00 64139.00
16
2600 MM DIA Meter 18.00 69747.00
2600 MM DIA Meter 20.00 75367.00
2600 MM DIA Meter 22.00 80993.00
2600 MM DIA Meter 32.00 116103.00
2600 MM DIA Meter 34.00 123157.00
2600 MM DIA Meter 36.00 130220.00
2600 MM DIA Meter 38.00 137294.00
2600 MM DIA Meter 40.00 144380.00
2600 MM DIA Meter 42.00 151475.00
2600 MM DIA Meter 44.00 158582.00
2600 MM DIA Meter 46.00 165698.00
2600 MM DIA Meter 48.00 172825.00
The above rates of MS Spiral pipes are based on the following raw materials cost.
MS Plates = Rs 36564/- Per MT.
17
BUILDINGS ITEMS
GOVERNMENT OF ANDHRA PRADESH
ROADS AND BUILDINGS DEPARTMENT
Buildings SoR 2013-14 ( Civil & WS Items)
BASIC
RATE for
SOR 2013-
Sl. Item
Description of item Unit 14
No Code
excluding
subsumed
taxes
1 2 3 4 5
BRICKS & BUILDING BLOCKS
A. (Ex-quarry price - including material VAT, loading excluding cost of
conveyance, unloading & stacking )
ORDINARY CLAY BRICKS
Common burnt clay bricks of class as per Table-1 of IS:1077-1992 Non-Modular or
1 BMT-A.01
traditional size 23 x 11 x 7 cm
1000 Nos 3331
Common burnt clay bricks of class as per Table-1 of IS:1077-1992 Modular or
2 BMT-A.02
traditional size 19 x 9 x 9 cm
1000 Nos 4497
FLY-ASH CEMENT/LIME SOLID BLOCKS
(ex-quarry price - excluding cost of conveyance, loading & unloadin g)
Fly ash cement/lime solid blocks with compressive strength of 75 kg/sq.cm -
3 BMT-A.03
IS:12894-1990 - CLASS - 7.5 - 290 x 225 x 140 mm
Each 20
4 BMT-A.04
IS:12894-1990 - CLASS - 7.5 - 290 x 200 x 140 mm
Each 17
5 BMT-A.05
IS:12894-1990 - CLASS - 7.5 - 290 x 150 x 140 mm
Each 13
6 BMT-A.06
IS:12894-1990 - CLASS - 7.5 - 290 x 112/100 x 140 mm
Each 11
7 BMT-A.07
IS:12894-1990 - CLASS - 7.5 - 225 x 100 x 60 mm
Each 5
8 BMT-A.08
IS:12894-1990 - CLASS - 7.5 - 145 x 225 x 140 mm
Each 12
9 BMT-A.09
IS:12894-1990 - CLASS - 7.5 - 145 x 200 x 140 mm
Each 9
Fly ash cement/ lime solid blocks with compressive strength of 50 kg/sq.cm -
10 BMT-A.10
IS:12894-1990 - CLASS - 5 - 290 x 225 x 140 mm
Each 16
11 BMT-A.11
IS:12894-1990 - CLASS - 5 - 290 x 200 x 140 mm
Each 14
12 BMT-A.12
IS:12894-1990 - CLASS - 5 - 290 x 150 x 140 mm
Each 10
13 BMT-A.13
IS:12894-1990 - CLASS - 5 -290 x 112/100 x 140 mm
Each 9
14 BMT-A.14
IS:12894-1990 - CLASS - 5 - 225 x 100 x 60 mm
Each 4
15 BMT-A.15
IS:12894-1990 - CLASS - 5 -) 145 x 225 x 140 mm
Each 9
16 BMT-A.16
IS:12894-1990 - CLASS - 5 - 145 x 200 x 140 mm
Each 8
17 BMT-A.17 Supply of well burnt cinder aggregates as per IS: 2686-1977 1 Cum 450
AUTOCLAVED CONCRETE BLOCKS
(landing cost - including cost of conveyance, loading & unloading )
Supply of Aerated (Cellular) Autoclaved Concrete Blocks conforming to IS:2185
18 BMT-A.18 (Part-3) - 1984 and IS:6441-1972 of Compressive strength 3 N/mm2 - 600 x 200 x Each 77
100 mm
150 mm
200 mm
21 BMT-A.21 (Part-3) - 1984 and IS:6441-1972 of Compressive strength 3 N/mm2 600 x 200 x Each 162
230 mm
NATURAL FLOORING STONES
B. (Ex-quarry price - including material VAT, loading excluding cost of
conveyance, unloading & stacking )
LOCALLY AVAILABLE FLOORING STONES
Page # 1
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
22 BMT-B.01 Kadapa slab 40 mm thick and size not less than 0.457 M x 0.457 M 1 Sqm 77
23 BMT-B.02 Kadapa slab 50 mm thick and size not less than 0.457 M x 0.457 M 1 Sqm 88
24 BMT-B.03 Shahabad /Tandur Rough Stone slabs of minimum of 25 mm thick 10 Sqm 763
25 BMT-B.04 Shahabad / Tandur Rough Stone slabs of minimum 40 mm thick 10 Sqm 984
26 BMT-B.05 Polished Shahabad/ Tandur stone slabs of 15 to 18 mm thick 10 Sqm 1313
27 BMT-B.06 Polished black Kadapa slabs minimum of 15 mm thick (0.457x0.457M) 10 Sqm 1094
Polished Bethamcherla pure (marble type) white stone minimum 25 mm thick
28 BMT-B.07
(0.254Mx0.254M)
10 Sqm 3064
29 BMT-B.08 Polished Bethamcherla coloured stone minimum 25 mm thick (0.254M x0.254M) 10 Sqm 2188
NATURAL FLOORING STONES - GRANITE
High Polished Granite 16 to 18 mm thick up to 2.43 M other than black/ premium
30 BMT-B.09
colours
1 Sqm 2339
High Polished Granite 16 to 18 mm thick up to 2.43 M other than black and regular
31 BMT-B.10
colours
1 Sqm 2034
32 BMT-B.11 High Polished Granite 16 to 18 mm thick up to 2.43 M black 1 Sqm 1729
NATURAL FLOORING STONES - MARBLE
Polished Marble slabs of Dongari/ Adanga/ Marodh/ Rajgangpur etc., variety of
33 BMT-B.12
thickness between 16 mm to 20 mm of sizes from 600 mm to 900 mm
1 sqm 579
Polished Marble slabs of Dongari/ Adanga/ Marodh/ Rajgangpur etc., variety of
34 BMT-B.13
thickness between 16 mm to 20 mm of sizes up to 600 mm
1 sqm 468
Polished Marble slabs of any variety and gang saw cut (Such as Dongari/ Adanga/
35 BMT-B.14 Marodh/ Rajgangpur etc) 16 mm to 20 mm (average) thick ( 0.610 M width of any 1 sqm 793
length)
36 BMT-B.15 Polished Marble Tiles of 8 - 10 mm thickness of all sizes and varieties 1 sqm 378
37 BMT-B.16 Granite stone tiles 8 mm thick (mirror polished of all shades) 1 sqm 793
WALL & FLOOR TILES
C. (Landing cost - including material VAT, loading, cost of conveyance,
unloading & stacking )
Supply of Ceramic floor tiles of notless than 7.3mm thick 1st quality in all shades
39 BMT-C.01
and designs
1 sqm 380
Supply of Edge Cut - Rectified Ceramic floor tiles of notless than 8 mm thick 1st
40 BMT-C.02
quality in all shades and designs
1 sqm 457
Supply of decorated white background glazed wall tiles of any size and of 5 to 7 mm
41 BMT-C.03
thick
1 sqm 467
Supply of screenprinted, decorated coloured background glazed wall tiles of any
42 BMT-C.04
size and of 5 to 7 mm thick
1 sqm 520
Supply of decorated coloured background glazed wall tiles of any size and of 5 to 7
43 BMT-C.05
mm thick
1 sqm 493
44 BMT-C.06 Supply of Ist quality, plain white glazed wall tiles of any size and of 5 to 7 mm thick 1 sqm 285
Supply of Ist Quality, glazed plain coloured wall tiles of any size and of 5 to 7 mm
45 BMT-C.07
thick
1 sqm 338
46 BMT-C.08 Supply of precast terrazzo tiles 20 mm thick of medium shades 1 sqm 242
47 BMT-C.09 Supply of precast terrazzo tiles 20 mm thick of dark shades 1 Sqm 236
48 BMT-C.10 Supply of coloured precast terrazzo tiles of 20 mm thick 1 Sqm 254
49 BMT-C.11 Supply of white/ plain precast terrazzo tiles of 20 mm thick 1 Sqm 197
50 BMT-C.12 Supply of grey precast terrazzo tiles of 20 mm thick 1 Sqm 128
Supply of vitrified polished floor tiles of size not less than 900 x 900 x 10 mm
51 BMT-C.13
thickness regular finish and normal colours
1 Sqm 1042
Supply of vitrified polished floor tiles of size not less than 795 x 795 mm x 8 mm
52 BMT-C.14
1 Sqm 918
Page # 2
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
53 BMT-C.15
thickness glossy finish permium colours
1 Sqm 857
54 BMT-C.16
1 Sqm 516
Supply of vitrified polished floor tiles of size not less than 400 x 400 x7mm thickness
55 BMT-C.17
normal colours
1 Sqm 551
56 BMT-C.18 Supply of glass mosaic tiles 1st quality of size 20x20x4 mm thick 1 Sqm 1163
Providing of Vitrified/ Ceramic Tile flooring for required areas using different
sizes, approved colour and make fixing with synthetic/ epoxy adhesive in specified
57 BMT-C.19
thickness with out joint including all taxes excluding cost of tiles 600 x 600 mm and
1 Sqm 126
above sizes tiles.
Providing of Vitrified/ Ceramic Tile flooring for required areas using different
sizes, approved colour and make fixing with synthetic/ epoxy adhesive in specified
58 BMT-C.20
thickness with out joint including all taxes excluding cost of tiles 400 x 400 mm and
1 Sqm 101
below size tiles
Providing tile flooring with synthetic/ epoxy adhesive in specified thick and pointing
59 BMT-C.21 specified colour cement based polymer grout mixed with grout admix including 1 Sqm 144
all taxes excluding cost of tiles: 600 x 600 mm tiles with 3 mm joints width
all taxes excluding cost of tiles:600 x 600 mm tiles with 4 mm joints width
Providing Glass Mosaic tiles using specified pattern fixing with grout and approved
67 BMT-C.29 colour of joint filling with admix cement grouting including all taxes excluding cost 1 Sqm 251
of tiles
68 BMT-C.30 with specified colour epoxy grout excluding cost of tiles:600 x 600 mm tiles with 4 1 Sqm 291
mm joints width
mm joints width
mm joints width
mm joints width
Page # 3
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
mm joints width
mm joints width
mm joints width
Providing Glass Mosaic tiles using specified pattern fixing with epoxy grout and
75 BMT-C.37 approved colour of joint filling with admix cement grouting including all taxes 1 Sqm 241
excluding cost of tiles
Providing Glass Mosaic tiles using specified pattern fixing with epoxy grout and
76 BMT-C.38
approved colour cement admix grout including all taxes excluding cost of tiles
1 Sqm 1071
Supply of design wall tiles of any colour and size other than highlighters and of
77 BMT-C.39
thickness 8 to 10 mm including all taxes
1 Sqm 356
Supply of design highlighters wall tiles of any colour and size and of thickness 8 to
78 BMT-C.40
10 mm including all taxes
1 Sqm 406
Supply of design highlighters wall tiles of premium / radium colours and of any size
79 BMT-C.41
and of thickness 8 to 10 mm including all taxes
1 Sqm 457
80 BMT-C.42 Supply of plain exterior wall tiles of thickness 20 mm of any size for wall claddings 1 Sqm 366
81 BMT-C.43 Supply of exterior design wall tiles of thickness 20 mm of any size for wall claddings 1 Sqm 468
Supply of Plain design floor and wall tiles set with floor tiles of thickness 15 mm and
82 BMT-C.44
wall tiles of thickness 9 mm
1 Sqm 526
Supply of textured design floor and wall tiles set with floor tiles of thickness 15 mm
83 BMT-C.45
and wall tiles of thickness 9 mm
1 Sqm 565
Supply of premium plain design floor and wall tiles set with floor tiles of thickness 15
84 BMT-C.46
mm and wall tiles of thickness 9 mm
1 Sqm 760
Supply of premium textured design floor and wall tiles set with floor tiles of
85 BMT-C.47
thickness 15 mm and wall tiles of thickness 9 mm
1 Sqm 790
Supply of premium plain design highlighter combination floor and wall tiles set with
86 BMT-C.48 floor tiles of thickness 15 mm and wall tiles of thickness 9 mm but excluding 1 Sqm 991
highlighters
Supply of premium plain design highlighter combination floor and wall tiles set with
87 BMT-C.49 floor tiles of thickness 15 mm and wall tiles of thickness 9 mm but including 1 Sqm 1016
highlighters
Vitrified polished floor tiles of size not less than 1000 x 1000 x 10 mm thickness with
88 BMT-C.50
nano technology printing and high glossy finish/ premium colours
1 Sqm 1429
Vitrified polished floor tiles of size not less than 795 x 795 mm x 8 mm thickness
89 BMT-C.51
with nano technology printing and high glossy finish/ premium colours special series
1 Sqm 1262
90 BMT-C.52 with nano technology printing and glossy finish permium colours high glossy finish/ 1 Sqm 1032
premium colours special series
91 BMT-C.53 with nano technology printing and glossy finish permium colours high glossy finish/ 1 Sqm 1143
premium colours special series
PAVING & INTERLOCKING TILES
D.
(landing cost - including cost of conveyance, loading & unloading )
Supplying precast terrazzo chequered tiles conforming to IS: 13801 using marble
aggregates of size 10 mm , sand, marble powder, white cement pigments etc., with
136 BMT-D.01
terrazzo topping not less than 6 mm of tiles overall size not less than 20 mm thick of
1 sqm 232
any coloured shades.
137 BMT-D.02 Chequered Terrazzo tiles of 22 mm thick (Dark shade) 0.254 M x 0.406 M 1 sqm
Supplying precast terrazzo tiles conforming to IS: 13801 using marble aggregates of
size 10 mm , sand, marble powder, white cement pigments etc., with terrazzo
138 BMT-D.03
topping not less than 6 mm of tiles overall size not less than 20 mm thick white
1 sqm 213
shades.
Page # 4
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Supplying precast terrazzo plain tiles conforming to IS: 13801 using marble
aggregates of size 10 mm , sand, marble powder, white cement pigments etc., with
139 BMT-D.04
terrazzo topping not less than 6 mm of tiles overall size not less than 20 mm thick
1 sqm 226
any coloured shades.
140 BMT-D.05 Chequered Terrazzo tiles of 30 mm thick ( medium shade) 0.305 M x 0.305 M 1 sqm 200
Supply, laying & fixing of 60 mm thick cement Mosaic reflective concrete pavers of
grade M-40 and above including labour charges, loading &unloading, laying to
141 BMT-D.06
desired lines and levels complete excluding cost of cement, sand, water, electricity
1 Sqm 452
etc
Supply, laying & fixing of 30 mm thick cement Mosaic reflective concrete pavers of
grade M-40 and above including labour charges, loading & unloading, laying to
142 BMT-D.07
desired lines and levels complete excluding cost of cement, sand, water, electricity
1 Sqm 467
etc
Supply of high strength Cement Concrete Designer Tiles of 30 mm thickness of M-
143 BMT-D.08 40 Grade of which top 12 mm thick shall be for colour pigmentation with imported 1 Sqm 412
colours and white cement to get required reflective glazing inclusive of all taxes
Supply of high strength Cement Concrete interlocking Designer Pavers of 60 mm
thickness of M- 40 Grade of which top 12 mm thick shall be for colour pigmentation
144 BMT-D.09
with imported colours and white cement to get required reflective glazing inclusive
1 Sqm 453
of all taxes
Supply of high strength Cement Concrete interlocking Designer Pavers of 80 mm
thickness of M- 40 Grade of which top 12 mm thick shall be for colour pigmentation
145 BMT-D.10
with imported colours and white cement to get required reflective glazing inclusive
1 Sqm 515
of all taxes
Supply of high strength Cement Concrete interlocking Regular Pedestrian Pavers of
60 mm thickness of M- 40 Grade of which top 12 mm thick shall be for colour
146 BMT-D.11
pigmentation with imported colours and white cement to get required reflective
1 Sqm 247
glazing inclusive of all taxes
Supply of high strength Cement Concrete interlocking Regular Pedestrian Pavers of
80 mm thickness of M- 40 Grade of which top 12 mm thick shall be for colour
147 BMT-D.12
pigmentation with imported colours and white cement to get required reflective
1 Sqm 268
glazing inclusive of all taxes
Supply of high strength Cement Concrete pre-polished ready to lay floor tiles of any
148 BMT-D.13 colour, design and any size with 22 mm thickness including all taxes with 1 Sqm 412
compressive strength not less than 450 Kg/cm² conforming to IS 516
Supply of high strength Cement Concrete Step tiles of regular colour, design and of
149 BMT-D.14
25 mm thickness including all taxes
1 Sqm 472
Supply of high strength Cement Concrete pre-polished Step tiles of any premium
150 BMT-D.15
colour, design and of 25 mm thickness including all taxes
1 Sqm 526
Supply of Cement Concrete interlocking cement grade finish non-reflective Pavers
151 BMT-D.16
of 60 mm thickness and dumbell, zig-zag, I-block shapes etc., inclusive of all taxes
1 Sqm 340

152 BMT-D.17
1 Sqm 374

153 BMT-D.18
1 Sqm 408
TIMBER & ROOFING MATERIALS

E. (Landing cost - including material VAT, loading, cost of conveyance,
Note: Before proposing the Teak Wood Items, the estimating authorities shall
obtain prior approval from the competent authority
168 BMT-E.01 Medium Teak Wood scantlings: up to 2.0 M 1 cum 54054
169 BMT-E.02 Medium Teak Wood scantlings: 2.0 to 3.0 M 1 cum 60060
170 BMT-E.03 Medium Teak Wood scantlings: above 3.0 M 1 cum 66065
171 BMT-E.04 Medium Teak Wood Plancks: any thickness 1 cum 108107
172 BMT-E.05 Best Teak Wood scantlings: up to 2.0 M 1 cum 93093
Page # 5
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
173 BMT-E.06 Best Teak Wood scantlings: 2.0 to 3.0 M 1 cum 99099
174 BMT-E.07 Best Teak Wood scantlings: above 3.0 M 1 cum 105105
175 BMT-E.08 Best Teak Wood Plancks: any thickness 1 cum 117116
176 BMT-E.09 Burma Teak Wood scantlings: up to 2.0 M 1 cum 108258
177 BMT-E.10 Burma Teak Wood scantlings: 2.0 to 3.0 M 1 cum 111350
178 BMT-E.11 Burma Teak Wood scantlings: above 3.0 M 1 cum 117116
179 BMT-E.12 Burma Teak Wood Plancks: any thickness 1 cum 126817
180 BMT-E.13 Assam Teak Wood scantlings: any length 1 cum 38418
181 BMT-E.14 Assam Teak Wood Plancks: any thickness 1 cum 55707
182 BMT-E.15 Sal Wood scantlings: any length 1 cum 41278
183 BMT-E.16 Sal Wood Plancks: any thickness 1 cum 55038
184 BMT-E.17 A.C sheet Corrugated 6 mm thick 1 sqm 176
185 BMT-E.18 A.C sheet plain 4 m thick 1 sqm 126
186 BMT-E.19 A.C sheet plain 6 m thick 1 sqm 131
Plain or Corrugated Galvanized iron sheets as per IS 277 (0.1 mm to 0.8 mm
187 BMT-E.20
thickness)
1 kg 48
MILD, GALVANIZED & STAINLESS STEEL (Landing cost - including material
F.
VAT, loading, cost of conveyance, unloading & stacking )
Mild Steel Hallow single rebate general putpose door frames manufactured using
cold roll formed process steel sheet of 1.25 mm thick bright (Cold Rolled Close
Annealed (CRCA) and profile-B of size 105 x 60 mm conforming to IS 4351 - 2003
190 BMT-F.01
including pretreatment, phosphating with Hinges, Base Ties, Holdfast Lugs, Mortar
1 Rm 257
Guards, shock absorbers and provision for Tower Bolts, Aldrops, Lock & Strike
plates etc. for both single and double shutter doors
191 BMT-F.02 Country Nails 1 Kg 48
192 BMT-F.03 Wire Nails 1 Kg 48
193 BMT-F.04 Mild Steel Tubes & pipes of all diameters as per IS-1161 1 Kg 48
Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & diameters -
194 BMT-F.05
202 Grade
1 Kg deleted
Stainless Steel Tubes, sections, plates, sheets & pipes of all sizes & diameters for -
195 BMT-F.06
304 Grade
1 Kg 263
Supplying Galvanized Steel Barbed wire conforming to IS 278 - 1978 : Type A -

196 BMT-F.07
IOWA Type Designation as per standard specification
1 Kg 65
Supplying Galvanized Steel Barbed wire conforming to IS 278 - 1978 : Type B -

197 BMT-F.08
Glidden Type Designation as per standard specification
1 Kg 65
Expanded metal sheets as per IS-412-1962- Light Weight-25 mm(SWM)x75 mm

198 BMT-F.09
(LWM)3.25 mm Wide and 1.25 mm thick
1 Sqm 116
Expanded metal sheets as per IS-412-1962- Light Weight-20 mm(SWM)x60

199 BMT-F.10
mm(LWM) 2.50 mm Wide and 1.25 mm thick
1 Sqm 116
Expanded metal sheets as per IS-412-1962- Light Weight-20 mm(SWM)x50

200 BMT-F.11
1 Sqm 116
Expanded metal sheets as per IS-412-1962- Medium Weight-25 mm(SWM)x75

201 BMT-F.12
1 Sqm 159
Page # 6
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes

202 BMT-F.13
1 Sqm 159

203 BMT-F.14
1 Sqm 159
Expanded metal sheets as per IS-412-1962- Heavy Weight-25 mm(SWM)x75

204 BMT-F.15
1 Sqm 181

205 BMT-F.16
1 Sqm 181

206 BMT-F.17
1 Sqm 181
207 BMT-F.18 Galvanized Iron fly proof wire mesh of not less than 20 gauge 1 Sqm 173
208 BMT-F.19 Stainless steel fly proof wire mesh of not less than 20 gauge 1 Sqm 418
Hot dipped Galvanised Iron Chain link mesh 8 gauge - (4.0 mm) as per IS: 2721-
209 BMT-F.20
1979: 2"x2" (50 mm x 50 mm) - 8 Gauge
1 Sqm 378
210 BMT-F.21
1979: 2½"x2½" (63 mm x 63 mm) - 8 Gauge
1 Sqm 300
211 BMT-F.22
1979: 3"x3" (76 mm x 76 mm) - 8 Gauge
1 Sqm 256
212 BMT-F.23
1979: 4"x4" (102 mm x 102 mm) - 8 Gauge
1 Sqm 190
213 BMT-F.24
1979 - PVC Coated - 2"x2" (50 mm x 50 mm) - 8 Gauge
1 Sqm 457
214 BMT-F.25
1979 - PVC Coated - 2½"x2½" (63 mm x 63 mm) - 8 Gauge
1 Sqm 378
215 BMT-F.26
1 Sqm 312
216 BMT-F.27
1 Sqm 244
217 BMT-F.28 Rabbit wire mesh (chicken mesh) of not less than 30 gauge 1 Sqm 14
Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA
laths, interlocked together through their entire length and jointed together at the
ends by end-locks, mounted on specially designed pipe shaft of 50mm dia nominal
bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom
218 BMT-F.29
locking plates and arrangements for inside & outside locking with push-pull
1 Sqm 2126
operations including cost of hood cover and springs complete, painted with one coat
of approved steel primer, locks, ball bearings, all accessories etc complete for
finished item of work as per special spn: 1108
Supplying & fixing collapsible steel shutters with vertical, double channel of 20
x10x2 mm of 100 mm centre ,Bracers with flat iron 40x40x6 mm with 38 mm dia
steel pulleys, the top, bottom and side vertical frames of the collapsible gate with
65x65mmx8mm MS Angle and middle guide rail at site height with 65mmx8mm MS
219 BMT-F.30
flat for the pulleys to guide and fixed with necessary hold fasts, bolts, nuts, rivets,
1 Sqm 1860
locking arrangements, stoppers, handles, all accessories all fixtures and painted
with one coat of approved steel primer etc., complete for finished item of work as
per special spn 1105
Page # 7
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Powder Coated Mild Steel Hallow single rebate door frames manufactured using
cold roll formed process steel sheet of 1.25 mm thick bright (Cold Rolled Close
Annealed (CRCA) and profile size of 105 x 60 mm conforming to IS 4351 - 2003
including pretreatment, Galvanized as per IS:277, zinc phosphating finished with
Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of
220 BMT-F.31
scratch resistance and durability/Epoxy polyester powder for powder coating paint
1 RM 553
thickness 60 – 65 microns(Dry film thickness)Stainless Steel Ball Bearing Butt
Hinges 3 mm thick fixed flush to the frame with Hinges, Base Ties, Holdfast Lugs,
Mortar Guards, shock absorbers and provision for Tower Bolts, Aldrops, Lock &
Strike plates etc. for both single and double shutter doors
Supply and Fixing Door Frames made of Skin pass galvanized Iron Sheet ( conform
to Base Steel as per IS 513 “D” Quality, Galvanized as per IS 277 with Hot Zinc
Coating of 120 grams/ Sq.mtr) with pure polyester powder coating of 60 - 65
Microns (Dry Film thickness) manufactured from 1.2 mm thick galvanized steel
sheet formed to single rebate profile of size 100 mm x 58 mm fitted with “TEE”
221 BMT-F.32
anchors and supplied to knock down /welded form with Miter Joint for Bolted
1 RM deleted
Assembly at site, cleaned and coated with Polyurethane powder coating of
thickness 65 – 75 microns (Dry Film Thickness) & Oven Baked at 200 Degree
Centigrade for Wood Grain finish, Stainless Steel Ball Bearing Butt Hinges of 102 x
76 x 3mm thick fixed flush to the frame
Supply and Fixing Door Frames made of Skin pass galvanized Iron Sheet ( conform
to Base Steel as per IS 513 “D” Quality, Galvanized as per IS 277 with Hot Zinc
Coating of 120 grams/ Sq.mtr) with pure polyester powder coating of 60 - 65
Microns (Dry Film thickness) manufactured from 1.2 mm thick galvanized steel
sheet formed to double rebate profile of size 148 mm x 58 mm fitted with “TEE”
222 BMT-F.33
anchors and supplied to knock down /welded form with Miter Joint for Bolted
1 RM deleted
Assembly at site, cleaned and coated with Polyurethane powder coating of
thickness 65 – 75 microns (Dry Film Thickness) & Oven Baked at 200 Degree
Centigrade for Wood Grain finish, Stainless Steel Ball Bearing Butt Hinges of 102 x
76 x 3mm thick fixed flush to the frame
G. FIXTURES FOR DOORS & WINDOWS
232 BMT-G.01 Brass Tower Bolt-10 mm Bolt (IS:204) 100 mm Long Each 86
237 BMT-G.06 Aluminium Tower Bolt-10 mm Bolt (IS:204) 75 mm Long Each 53
245 BMT-G.14 MS-Powder Coated Tower Bolt-10 mm Bolt (IS:204) 100 mm Long Each 20
Page # 8
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
250 BMT-G.19 Brass Butt hinges (IS:205)- 75 mm Long Each 36
254 BMT-G.23 Aluminium Butt hinges (IS:205)- 75 mm Long Each 76
258 BMT-G.27 MS-Powder Coated Butt hinges (IS:205)- 75 mm Long Each 9
262 BMT-G.31 Aluminium Door Handles (IS:208) 75 mm Long Each 51
266 BMT-G.35 MS-Powder Coated Door Handles (IS:208) 125 mm Long Each 26
267 BMT-G.36 MS-Powder Coated Door Handles (IS:208) 150 mm Long Each 39
268 BMT-G.37 Brass Aldrop (IS:2681) 300 mm long Each 758
271 BMT-G.40 Aluminium Aldrop (IS:2681) 200 mm long Each 224
274 BMT-G.43 MS-Powder Coated Aldrop (IS:2681) 200 mm long Each 89
277 BMT-G.46 Brass Door Stoppers Each 152
278 BMT-G.47 Brass Windows Stay Each 178
Page # 9
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
279 BMT-G.48 Aluminium Flat Latches: 200 mm long Each 108

282 BMT-G.51 MS-Powder Coated Flat Latches: 250 mm long Each 44
283 BMT-G.52 MS-Powder Coated Flat Latches: 300 mm long Each 56
284 BMT-G.53 MS-Powder Coated - Door Stoppers Each 39
285 BMT-G.54 Supply & fixing drapery rods (25.4 mm) 1" x 21 G Powder coated with PVC rings RM 99
286 BMT-G.55 Supply & fixing drapery bracket - brass powder coated pair 348
287 BMT-G.56 Deluxe window stay Aluminium Each 99
288 BMT-G.57 Heavy duty Aluminium Door stopper Each 43
289 BMT-G.58 Brass fancy handles 150 mm Each 258
Providing and fixing Cast Iron Body Bottle Type Hydraulic Door Closer (IS: 3564)
294 BMT-G.63 with double speed adjustment, with necessary accessories and screws etc. Each 798
complete
Double action Stainless steel cover plate and cast body iron floor spring (IS 6315-
295 BMT-G.64
Table-1)
Each 1088
296 BMT-G.65 Double action Brass cover plate and cast brass body floor spring (IS 6315- Table-1) Each 2582
297 BMT-G.66 Heavy duty mortise lock 6/7 levers (IS:2209) with PC or CP handles complete set Each 532
298 BMT-G.67 Heavy duty mortise lock 6/7 levers (IS:2209) with brass heavy handles Each 1854
299 BMT-G.68 Brass latch heavy 300 mm Each 443
302 BMT-G.71 Friction stay hinges for windows Each 82
303 BMT-G.72 Keyless lockset for toilet doors with CP or PC knob handles (complete set) Each 240
304 BMT-G.73 Keyless lock set for toilet doors with brass knob handles Each 634
Providing and fixing Aluminium Extruded Section Body Tubular Type Hydraulic
305 BMT-G.74 Door Closer (IS: 3564) with double speed adjustment with necessary accessories Each 860
and screws etc. complete (Type-1: for width of doors up to 700 mm)
and screws etc. complete (Type-2: for width of doors 701 to 850 mm)
and screws etc. complete (Type-3: for width of doors 851 to 1000 mm)
Page # 10
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Providing and fixing double action brass cast hydraulic floor spring (IS:6315-Table
1) for doors including cost of cutting floors as required, embedding in floors and
308 BMT-G.77
S.S./ Brass cover plates with brass pivot and single piece M.S. Sheet outer box with
Each 2719
slide plate etc. complete (door weight capacity up to 130 kgs)
Providing and fixing double action brass cast hydraulic floor spring (IS:6315-Table
1) for doors including cost of cutting floors as required, embedding in floors and
309 BMT-G.78
S.S.cover plates with brass pivot and single piece M.S. Sheet outer box with slide
Each 2021
plate etc. complete (door weight capacity up to 80 kgs)
Providing of brass cast body Floor Spring IS: 6315 sleek in size with the S.S. /
Brass Cover plates of Length 320 mm x Breadth 130 mm size along with the Top
310 BMT-G.79
Patch, Bottom Patch, Door Lock and Pivot with Double Cylinder etc. complete for
Each 8983
Heavy duty Glass doors.
H. WATER PROOFING CHEMICALS & ADMIXTURES
Literature for usage / application of construction / water proofing materials, epoxies
etc, may be obtained from manufacturers.
311 BMT-H.01 Supply of cement based Impervious Water Proofing powder compound 1 Kg 20
Providing Tar felting roof repairs with Rainseal Felt/ Zori-felt BT or equivalent duly
applying one coat of appropriate grade of bitumen in hot condition @ 0.2 Kg/1Sqm
of roof area, fixing tar felt (Manufactures to IS 1322/1972 specification), applying
312 BMT-H.02
second coat of appropriate grade of hot bitumen at 1.20 Kg/1Sqm of roof area and
1 Sqm 194
spreading course aggregate (sand) at 0.063 cum per 1 Sqm of roof area finished
item
Providing waterproofing treatment by supplying and applying Rainseal HDP 1500
/ROOFSHIELD-1500 OR ZORISHIELD-1500 equivalent (1.50 mm thickness,
2.25Kg per Sq. Mt and 20 X1 Mtr. roll with a centre core of 90 micron thickness
HMHDPE film) Water Proofing Membrane. A) apply one coat of Bituminous
313 BMT-H.03 Emulsion, first coat of bituminous grade 85/25, fix "Rainseal HDP 1 Sqm. 210
1500/ROOFSHIELD-1500 OR equivalent " water proofing membrane, apply second
coat of Bitumen grade 90/15 after sealing all the joints and abutments with a Gas
torch and apply one coat of Rainseal SAP- BITUMINOUS ALUMINIUM PAINT for
heat resistance for finished item
Providing chemical waterproof treatment with Brick bat coba & chemical cement
mortars to exposed RCC roof slab surfaces to required slopes mixed with
Conproof NO.1/ Rain Proof No 1/Zoriproof (100 mL Per Bag of 50 Kgs Cement)
waterproofing chemical compound, laid over roof slab and brickbat coba
treatment in chemical cement mortar 100 mm thick at the centre and 80 mm
thick at the edges finished smooth with a floating coat of chemical mixed cement
314 BMT-H.04 mortar as per the manufacturer specification including cost and conveyance of 1 Sqm 690
all materials like sand, chemical–Conproof NO.1/ Rain Proof No 1 Zoriproof (100
mL Per Bag of 50 Kgs Cement) waterproofing compound, water etc., to site,
including seigniorage charges and operational, incidental, and labour charges
for mixing mortar, laying, lift charges, rendering smooth curing including rounding
off junctions of wall and slab etc., complete for finished item of work (with a
guarantee of 10 years)
Providing chemical waterproof treatment with Brick bat coba & chemical cement
mortars to exposed RCC roof slab surfaces to required slopes mixed with –
Conproof NO.1/ Rain Proof No 1/Zoriproof (100 ML Per Bag of 50 Kgs Cement)
waterproofing chemical compound, laid over roof slab and brickbat coba
treatment in chemical cement mortar 80 mm thick at the centre and 60 mm thick
at the edges finished smooth with a floating coat of chemical mixed cement
315 BMT-H.05 mortar as per the manufacturer specification including cost and conveyance of 1 Sqm 574
all materials like sand, chemical –Conproof NO.1/ Rain Proof No 1/Zoriproof (100
mL Per Bag of 50 Kgs Cement) waterproofing compound, water etc., to site,
including seigniorage charges and operational, incidental, and labour charges
for mixing mortar, laying, lift charges, rendering smooth curing including rounding
off junctions of wall and slab etc., complete for finished item of work (with a
guarantee of 10 years)
Construction Chemicals, Epoxy & Admixtures - Chloride free water reducing and
316 BMT-H.06 plasticizing admixture : Consplax/ Conflow SNP1 Zoriplast (Dosage : 20 ml Per 1 litre 110
Bag of 50 Kgs Cement) or equivalent
Page # 11
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
High strength Acrylic blended platicizer and Water reducing agent - Roofplast
317 BMT-H.07 HS 100/ Conflow SNP20 or Zoriplast HS (Dosage : 400 ml to 500 ml Per Bag of 1 litre 128
50 Kgs Cement)
Quick setting, rapid hardening and water proofing compound - : Rapidstrong
318 BMT-H.08 QS/Conflow SNPA or ZorirapidR or Equivalent (Dosage : 1 to 3 Ltrs per bag of 50 1 litre 64
Kgs Cement depending on the setting time required).
Chloride free super plasticizer for high range water reducing admixture :
319 BMT-H.09 Roofplast SP 35/Conflow SNS I or Zoriplast SP 350 (Dosage: 200 ml to 500 ml per Litre 58
bag of 50 Kgs Cement) or equivalent.
Chloride free super plasticizer for high early strength and high range water
320 BMT-H.10 reducing admixture : Roof plast SP 45/Conflow SNS 2 or Zoriplast SP 450 Litre 64
(Dosage: 200 ml to 500 ml per bag of 50 Kgs Cement) or equivalent.
Set accelerator and plasticizer: Roofplast SCA/ Conflow SNA or Zoriset or
321 BMT-H.11 Equivalent (Dosage:1 Kg to 3 Kgs per bag of 50 Kgs Cement depending on the Kgs 60
setting time required )
Chloride free High power slump retaining and retarding plasticizer: Roofplast
322 BMT-H.12 RT5/Conflow SNR or Zoriplast RT5 (Dosage: 15ml to 40 ml per bag of 50 Kgs Litre 119
Cement) or Equivalent.
Air Entraining Agent: Roofplast AEA/ Conflow SNE or Zoriplast AEA (Dosage : 5ml
323 BMT-H.13 to 25 ml per bag of 50 Kgs Cement) or Equivalent (Dosage : 15ml per Bag of 50 Litre 111
Kgs Cement)
Chloride free super plasticizer, high range water reducing and retarding
324 BMT-H.14 admixture - Roofplast SR5/Conflow SNS-3 SPL or Zoriplast SRT5 (Dosage : 300 Litre 75
ml to 400 ml per bag of 50 Kgs Cement) or equivalent
Retarding super plasticizer: Conflow SNS-3 or Accelerating Plasticizers :
325 BMT-H.15 Roofplast SA/ Zoriplast AC (Dosage : 500 ml to 1 Ltr per bag of 50 Kgs Cement) Litre 61
or Equivalent.
Waterproof Cement Mortar Plasticizer : Roofpalst MP/ Morflow SN 1 or Zoriplast
326 BMT-H.16
MP ( Dosage : 100 ml per bag of 50 Kgs Cement) or Equivalent.
Litre 115
Integral Cement Waterproofing Compound : Conproof No.1/ Rainproof
327 BMT-H.17 No.1/Conflow SNW1 or Zoriproof (Liquid Form) (Dosage : 100 ml Per Bag of 50 Litre 128
Kgs Cement)
Integral Cement Waterproofing Compound :Conproof No.1/ Rainproof
328 BMT-H.18 No.1/Conflow SNW2 or Zoriproof ( Powder Form) ( Dosage : 500 Grams per bag Kg 20
of 50 Kgs Cement) or Equivalent.
High plasticizing cement waterproofing liquid based on naphtha lane
329 BMT-H.19 formaldehyde : Conproof LW 200/ Rainproof LW SPL/Conflow SNW2 - 750 Gms or Litre 77
Zorishield 200 or Equivalent. (Dosage:200 ml per Bag of 50 Kgs Cement)
Block Admixture: Roofplast BA/ Conflow SNB or Zoriplast BA (Dosage: 20 ml to
330 BMT-H.20
25ml per bag of 50 Kgs Cement) or Equivalent.
Litre 115
Sprayed Concrete Accelerator: Shotset SN1 or Roofplast SA/ Zoriset SCA or
331 BMT-H.21
Equivalent (Dosage : 500 ml – 2.5 Ltrs/bag of Cement ).
Kg 58
Surface treatment water Based high power curing compounds: Curaid SN1 or
332 BMT-H.22
Roofexcure WB/Zoricure WB (Coverage : 5-6 Sq. Mtrs / Ltr / Coat ) or Equivalent.
Litre 55
Concrete wax based pigmented curing compound : Curaid SN2 or Roofexcure

333 BMT-H.23
WX/ Zoricure SB or Equivalent. (Coverage : 4-5 Sq. Mtrs / Ltr / Coat )
Litre 111
Formwork & Mould Treatment: Roofcare MRA/ Shutterol SNU or Zorislip or
334 BMT-H.24 Equivalent. (Coverage: 1 Ltr Zorislip will cover approx 20 to 30 m2 on method Litre 115
and material of the form )
Cleaning and acid etching agents: Tilex Kleen AC/ Uniklen SN1 or Zorikleen AC or
335 BMT-H.25
Equivalent.
Litre 60
Ready to use universal degreasing and cleaning agents:Tilex Kleen DA/ Uniklen
336 BMT-H.26
SN2 or Zorikleen DA or Equivalent.
Litre 64
Liquid Cleaning Agent: Tilex Kleen LC/ Uniklen SN3 or Zorikleen LC or
337 BMT-H.27
Equivalent.
Litre 102
Non-shrink Free flow high strength injection grout : Rapidstrong Grout GP2/
338 BMT-H.28 Expacrete SN50 or Zorigrout GP 2 or Equivalent. (Yield 13.5 Ltrs Per 25 Kgs Kg 27
Bag).
Non-shrink Free flow grout: Rapidstrong Grout GP3/Expacrete SN70 or Zorigrout
339 BMT-H.29
GP 3
Kg 29
Non-shrink Free flow grout: Rapidstrong Grout GP4/ Expacrete SN90 or Zorigrout
340 BMT-H.30
GP 4
Kg 31
Page # 12
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
High strength cementitious non-shrink Free flow grout : Rapidstrong Grout Admix/
341 BMT-H.31 Expacem SN2 or Zorigrout GP 1 or Equivalent. (250 Gms per Bag of 50 Kgs 1 Kg pack 28
Cement).
Low viscosity Epoxy resin injection grout (Two parts) :Rapidstrong Grout
342 BMT-H.32
EP/Expacrete SNE 1 or Zorigrout EP or Equivalent.(Density 1.07 Kg Per Ltr )
Kg 634
Epoxy Resin Grouts:Rapidstrong Grout EP3/ Expacrete SNE 3 or Zorigrout EP 3 or
343 BMT-H.33
Equivalent.
Kg 134
High Power Polyester Resin Anchor Grout: Rapidstrong Grout AG/Anchorset SN1
344 BMT-H.34
or Zorifix or Equivalent. (Yield 0.5 Ltrs / 1 Kg Pack )
Kg 215
High strength, high polyester resin grouts – Rapidstrong AG Pride/Anchorset SN2
345 BMT-H.35
or Zorifix XL or Equivalent. ( Yield 0.5 Ltrs / 1 Kg Pack )
Kg 400
Non-metalic Floor Hardeners : Rapidstrong NH/Flortop SNC or Zorifloor DH or
Equivalent. ( Coverage : May be applied at rate 3.5 Kgs /m2 over green concrete
346 BMT-H.36
for normal traffic & 6-12 Kg / M2 for heavy traffic. Higher application rates yield
Kg 30
better abrasion resistance)
Non oxidizing, heavy duty metallic Floor Hardeners:Rapidstrong FM/ Flortop SNS or
347 BMT-H.37
Zorifloor NH or Equivalent.
Kg 24
Epoxy Floor coating: Procoat SNF or Food neutral Epoxy waterproof / damproof
348 BMT-H.38 coating : Roofcare EP/ Zoricoat EP or Equivalent. (Coverage : 70 to 80 SFT / Per Kg 418
Ltr / coat)
Polysulphide modified epoxy coatings: Procoat SNS or Roofcare EPS/Zoricoat
349 BMT-H.39 EPS or Equivalent (Coverage : 250 to 300 Gms / M2 and forms a DFT of 175 to 200 Kg 418
Micron)
350 BMT-H.40 Essenputty SNE or Epoxy putty - Roofcrete Putty EP/ Zoriputty EP or Equivalent Kg 247
Zincrich epoxy resin primer - Roofguard ZP/Procoat SNZ or Zoriguard ZP or
351 BMT-H.41
Equivalent (Coverage : 4-5 Sq.Mtr. /Ltr / Coat)
Kg 364
Chemical resistance, fungus resistance water based polyurethane sterile coating
352 BMT-H.42 : Roofcare PU/ Procoat SNL or Zoristerile or Equivalent ( Coverage : 60 to 65 Pack 638
SFT / 2 Coats / Ltr)
Solvent free chemical resistant Epoxy self leveling (for food and pharmaceutical
353 BMT-H.43 industry) Flooring system: Armstrong FL-SL/Flortop SNSL or Zorifloor SL or Kg 249
Equivalent. ( 8.25 to 0.30 M2 / Kg mix with 2mm thickness )
Self leveling self smoothing water based epoxy floor topping : Armstrong FL-
354 BMT-H.44 SLW/Flortop SNSL-SPL or ZORIFLOOR SLW - 1.5- 3mm or Equivalent (Coverage Kg 253
: 4.5m2 / 17 Kg Pack @ 2mm thickness depending on the substrate)
High build heavy duty epoxy resin floor coating : Armstrong HBF/ Flortop SNM or
355 BMT-H.45 Zorifloor HB or Equivalent. (Coverage : Base coat 10- 12 m2/ 5 Kg @ 250 Kg 267
microns DFT )
Epoxy based repair mortar / concrete : Roofcrete EP/ Flortop SNFM or Zoricrete
356 BMT-H.46
EP or Equivalent.
Litre 338
Solvent free Epoxy resin primer for floor coatings : Florcoat SNP or Roofbond EP
357 BMT-H.47 Primer/ Zoriprime EP or Equivalent. (Coverage : 3 Kg unit covers about 13m2 for Pack 404
DFT of about 120 micron.)
Solvent free epoxy resin primer for protective coatings – Procoat SNC or
358 BMT-H.48 Roofbond EPF Primer/ Zoriprime EPF or Equivalent (Coverage : 3 Kg unit covers Pack 421
about 13m2 for DFT of about 120 micron.)
Epoxy Primer for floor coatings and protective coatings - Procoat SNP or
359 BMT-H.49
Roofbond EFC Primer/ Zoriprime EFC or Equivalent.
Pack 468
Epoxy primer for Hibond floor & protective coatings : Procoat SNP2 or Roofbond
360 BMT-H.50
EFC2 Primer/ Zoriprime EFC 2
Pack 616
Cementitious Micro concrete Repair products: Repcrete SNC or Roofcrete
361 BMT-H.51
MC/Zoricrete MC or Equivalent.
Kg 29
Repair Products:Repcrete SNE1 or Epoxy mortar - Roofcrete EP/Zoricrete EPM or
362 BMT-H.52
Equivalent
Kg 425
Under water epoxy resin system for repair products : Repcrete SNW or Roofcrete
363 BMT-H.53
EUW/Zoricrete EUW or Equivalent.
Kg 747
Under water epoxy resin system mortar – Repcrete SNW Mortar or Roofcrete
364 BMT-H.54
EUW/Zoricrete EMU
Kg 723
Fast setting cement based plugging compound - Uniplug SN or Wonderseal
365 BMT-H.55
Plug/Zoriplug or Equivalent ( Powder Form : mix with water direct application )
Kg 68
Page # 13
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
High durable cementitious acrylic based two pack Waterproofing systems : Aqua
366 BMT-H.56 coat SNF or Roofbond RFX/Zoricoat RX or Equivalent. (12 – 14 m2 in two coats Kg 106
to achieve 1mm thickness )
Water Repellents: Aquarepel SN1 or Water based silicon water repellent, Nano
367 BMT-H.57
technology - Rain care WR/ Zoripel WB or Equivalent
Litre 574
Tile Adhesives: Tilegrip SNU or Tilex/ Zorimix or Equivalent. (At 3mm thickness 7-
368 BMT-H.58
9 Sqm / 25 Kgs )
Kg 14
Acrylic based Bonding Adhesives: Conbond SNA or Roofbond PB/ Zoribond PB or
369 BMT-H.59
Equivalent. (Mix: 1:1 ratio of cement 50 SFT / Ltr /coat depending on the substrate)
Litre 119
Epoxy based Bonding adhesive: Conbond SNE or Roofbond EP/Zoribond EP or
370 BMT-H.60
Equivalent. (Coverage : 20 – 25 SFT / Kg /Coat)
Pack 702
Supply of anti-corrosion admixture inhibitor liquid as per Central Electro
371 BMT-H.61 Chemical Research Institute developed specification and licensee of Concare or Litre 159
Concare Plus or Equivalent (300 ml to 500 ml per Bag of 50 Kgs Cement)
HI-BOND: Concrete Plasticizers: HI-PLAST 01 or Roofbond High plast ( Dosage :
372 BMT-H.62
100 ml Per Bag of 50 Kgs Cement)
Litre 128
Concrete Plasticizers: HI-PLAST 02 or Roofbond High plast – 2 (Dosage : 200 ml
373 BMT-H.63
per bag of 50 Kgs Cement)
Litre 85
374 BMT-H.64 Concrete Plasticizers: HI-PLAST PA or Roofbond AC Litre 87
375 BMT-H.65 Super Plasticizers: HI-PLAST SP or Roofbond SP 30 Litre 70
376 BMT-H.66 Super Plasticizers: HI-PLAST SP AR or Roofbond SP 40 Litre 87
Accelerating Plasticizers: HI-PLAST AR or Concrete plasticizing, water reducing
377 BMT-H.67 and accelerating admixture - Roofbond PA (Dosage: 500 ml to 1000 ml Per Bag of Litre 70
50 Kgs Cement) or Equivalent.
378 BMT-H.68 Retarding Plasticizers: HI-PLAST RT or Roofbond RT 30 Litre 68
379 BMT-H.69 Air Entraining Agents: HI-PLAST A.E or Roofbond AEA Litre 128
380 BMT-H.70 Retarding Super Plasticizers: HI-PLAST SP RT or Roofbond SR 30 Litre 85
381 BMT-H.71 HI-PLAST RSP or Roofbond SR 40 or Equivalent. Litre 94
Mortar Plasticizers: HI-PLAST MP or Roofbond MP ( Dosage : 100 ml Per Bag of
382 BMT-H.72
50 Kgs Cement)
Litre 136
Integral Water Proofing compounds: HI-PROOF (L) or Liquid Concentrated
383 BMT-H.73 Micronized Cement Waterproofing Compound : Roofguard 500/Roofbond 500 Litre 77
(Dosage : 500 ml per bag of 50 Kgs Cement) or Equivalent.
HI-PROOF (P) or Conproof P/Roofbond - P or Equivalent ( Dosage : 1 Kg Per
384 BMT-H.74
Bag of 50 Kgs Cement).
Kg 21
385 BMT-H.75 or Roofbond 750 or Equivalent Litre 60
Block Admixtures: HI-ADMIX or Roofbond BA or Equivalent ( Dosage : 20 ml Per
386 BMT-H.76
bag of 50 Kgs Cement)
Litre 19
Sprayed Concrete Accelerators: HI-ACCEL or Roofbond SA or Equivalent. (
387 BMT-H.77
Dosage : 50 Grams to 1 Kg Per Bag of 50 Kgs Cement)
Kg 51
Surface Treatments curing compounds: HI-CURE 01 or Roofex WB /Roofcoat/
388 BMT-H.78
Zoricoat
Litre 404
Surface Treatments Polyurethane curing compounds: HI-CURE 02 or Roofex
389 BMT-H.79
WXB/ Roofcare PU/ Zoricoat PU
Litre 255
Surface Treatments Crystalline Repair Products: HI-CRM or Roofex GP2 or
390 BMT-H.80
Zoripex Equivalent
Kg 27
Polyurethane Sealent - Roofseal PU/ Zoriseal PUHI-CRM EX or Roofex EC or
391 BMT-H.81
Equivalent
Kg 584
Polyurethane Sealent - Roofseal PS/ Zoriseal PS/HI-CRM EXW or Roofex EW or
392 BMT-H.82
Equivalent.
Kg 531
Structural graded polymer modified reinstatement concrete / mortar – Roofcrete
393 BMT-H.83
AR/ Zoricrete CMG or Equivalent
Kg 66
Water Proofing: Liquid applied single component, elastomeric waterproofing
membrane coating with -Rain seal/ Zoricoat XL or Equivalent. (Coverage : 50 to 60
394 BMT-H.84
SFT Per Ltr / Coat ) ( for brush / spray application add 20% water per Ltr ) As a
Litre 298
primer coat application dilute with water @ of 1 : 1 ratio recommended.
Page # 14
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Water Repellents: Solvent based silicon water repellent compound - Roofcare

395 BMT-H.85
WR/Zoripel SB or Equivalent. (Direct application )
Litre 276
Tile Adhesives: HI-ADHESIVE or High strength tile adhesive ( tile on tile) : Tilex
396 BMT-H.86 Grout Hi- Grip/ Zorimix Hi-Grip or Equivalent. ( At 3mm thickness 7-9 Sqm / 25 Kg 19
Kgs )
Supply of Concare-XL Anti Corrosion and leak proof Crack Proof ,Water Proof
397 BMT-H.87
,Concrete Hardener Admixture liquid Dosage (200 ml to 250 ml per Bag of Cement
Litre 234
398 BMT-H.88 HI-FIX Epoxy tile mortar - Tilex EH/ Zorimix EH or Equivalent Kg 111
HI-BOND Wall Putty Normal or Grey cement based Gypsum Plaster – Wallstrong
399 BMT-H.89
GP/Zoritek GP or Equivalent (Coverage : 35 to 40 SFT per bag of 40 Kgs Pack)
Kg 11
HI-BOND Wall Putty Fine or Portland cement based plaster finish surface for
400 BMT-H.90
interior – Wallstrong PC/ Zoritek PC or Equivalent.
Kg 12
HI-BOND Wall Putty Super Fine or Acrylic based ready to use surface (white / off
401 BMT-H.91 white) -Wallstrong WC/ Zoritek WC or Equivalent. (At 1.5 to 2mm thickness 100 - Kg 13
125 SFT Per Bag of 25 Kgs Pack )
HI-BOND Wall Putty Super Fine (Water Resistant) or Smooth crack free, water
402 BMT-H.92
resistant finish plaster Wallstrong WP/ Zoritek WP or Equivalent
Kg 33
BITUMINOUS HOT SEALING COMPOUND: Grade 'A' I.S.I excluding ST or
403 BMT-H.93
Rainseal BS/ Zoriseal BS Grade ‘A’ or Equivalent
1 Kg 77
Bitumen solution primer of approved quality: Rainseal BT primer/ Zoriprime BT or
404 BMT-H.94
Equivalent.
1 Kg 68
405 BMT-H.95 Tarfelt Rainseal Felt/ Zorifelt BT Type : 2 Grade : 1 or Equivalent 1 sqm 102
Supply and application of Liquid admixture for concrete with high resistance against
406 BMT-H.96 water ingress and having surface active agents & refined lignosulphonate Rheomac 1 Litre 78
707 of BASF
Supply and application of two component acrylic modified cementitious system for
forming coating to waterproof and resurface concrete, masonry and other
407 BMT-H.97
construction materials waterproof and flexible coating MASTERSEAL 550 GREY of
1 Kg 59
BASF
Supply and application of Elastomeric flexible two component polymers modified
cementitious system for forming waterproof coating on concrete, masonry & other
408 BMT-H.98
construction material up to 2mm thick MS550 EL membrane and reinforced with
1 Kg 70
100% virgin polypropylene woven fabric MASTERSEAL 550 EL of BASF
Supply and application of grey cementitious powder polymer additive and cement-
409 BMT-H.99 based adhesive for fixing ceramic & vitrified wall and floor tiles, quarry tiles and 1 Kg 18
similar materials MASTERTILE 25 of BASF
Supply and application of premixed, non-metallic, ready to use powder, designed for
BMT- application as a dry shake over freshly floated concrete floors or floor screeds to
410
H.100 obtain a monolithic floor with enhanced abrasion resistance MASTERTOP 100
1 Kg 18
(GREY) of BASF
BMT- Supply and application of synthetic polymers to impart rheoplastic qualities to
411
H.101 concrete RHEOBUILD 920 (SH) of BASF
1 Kg 54
BMT- Supply of Concare-Plus Admixture Anti Corrosion and leak proof Weather Proof,
412
H.102 Concrete Hardener Admixture.Dosage (200 ml to 250 ml per Bag of Cement )
1 Litre 213
BMT- Supply of Concare-LP polymer based, leak proof, Admixture liquid, dosage (250 ml
413
H.103 to 300 ml per Bag of Cement )
1 Litre 153
BMT- Supply Con- life –Water Proof, Leak Proof, Concrete Hardener, Rust Proof,
414
H.104 Admixture Liquid Dosage (200 ml to 250 ml per Bag of Cement )
1 Litre 230
Supply of Contech – 2000 bio Product (Powder) Anti Corrosion leak proof, Crack
BMT- Proof ,Chemical Resistant, whether proof, inhibitor liquid. Dosage (5 to 10% of
415
H.105 cement weight Cement ) and 15% in serve environmental Condition like marine
1 Kg 247
structures / coastal structures and chemical structures,Godowns, effect
Supply of Con – Cura Self Curing Agent Admixture for Concrete. Dosage (100 ml –
BMT-
416
H.106
250ml per bag (50kgs) of cement depending on the atmospheric temperature and 1 Litre 1020
humidity)
Supply of Con – Grout Epoxy Pourable Crack / Gap Filling Grout System. Dosage
BMT-
417
H.107
(Varies with climate, Site / Substrate Status. Average density is 1.20 Kg / ltr 1 Kg 2806
(System)
Page # 15
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Supply of Con Mix – XL Liquid super Plasticizer And Waterproofing With Anti
BMT-
418
H.108
Corrosive properties. Dosage (100 Ml – 1ltr Per bag (50Kg)of Cement) Dosage 1 Litre 383
Should be finalized after initial site trials
Approved brands, area of application, dosage etc have been appended to this SoR
for the guidance for preparation of estimates only. However, literature for usage/
application of construction/ water proofing materials, epoxies etc, may be obtained
from the manufacturers, while in execution.
GLASS
I. (Landing cost - including material VAT, loading, cost of conveyance,
466 BMT-I.01 Plain Float Glass 4 mm thick 1 sqm 350
467 BMT-I.02 Plain Float Glass 5 mm thick 1 sqm 443
468 BMT-I.03 Plain Float Glass 6 mm thick 1 Sqm 550
472 BMT-I.07 Tinted - Bronze/ Green Glass 4 mm thick 1 sqm 409
473 BMT-I.08 Tinted - Bronze/ Green Glass 5 mm thick 1 sqm 511
474 BMT-I.09 Tinted - Bronze/ Green Glass 6 mm thick 1 Sqm 613
478 BMT-I.13 Pin headed Glass 4 mm thick 1 sqm 263
479 BMT-I.14 Pin headed Glass 5 mm thick 1 sqm 341
480 BMT-I.15 Frosted / Ground Glass 4 mm thick 1 sqm 472
481 BMT-I.16 Frosted / Ground Glass 5 mm thick 1 sqm 593
482 BMT-I.17 Toughened Plain Glass 5 mm (including Glass) 1 sqm 711
PAINTS & POLISHES
J. (Landing cost - including material VAT, loading, cost of conveyance,
487 BMT-J.01 Supply of water based Cement Primer of Interior Grade- 1 1 Kg 104
488 BMT-J.02 Supply of water based Cement Primer of Exterior Grade- 2 1 Kg 62
489 BMT-J.03 Supply of Red Oxide Primer Paint for iron works of Grade -1 1 Litre 94
490 BMT-J.04 Supply of Zinc Chromate Yellow Oxide Primer paint for iron works 1 Litre 136
491 BMT-J.05 Supply of Wood Primer 1 Litre 105
492 BMT-J.06 Supply of Metal paste (Putty) for steel works 1 Kg 105
493 BMT-J.07 Supply of Putty for wood work 1 Kg 105
494 BMT-J.08 Supply of White Lead 1 Kg 76
495 BMT-J.09 Supply of Synthetic clear Varnish 1 Litre 105
496 BMT-J.10 Supply of Spirit 1 Litre 74
497 BMT-J.11 Supply of Linseed Oil 1 Litre 42
498 BMT-J.12 Supply of thinner for melamine polish/ french polish 1 Litre 97
499 BMT-J.13 Supply of thinner for Poly-urethene polish 1 Litre 200
500 BMT-J.14 Supply of French Polish 1 Litre 138
501 BMT-J.15 Supply of ready made Wax Polish 1 Kg 421
502 BMT-J.16 Supply of Melamine Polish 1 Litre 233
503 BMT-J.17 Supply of Interior Grade Poly-Urethene Polish 1 Litre 474
504 BMT-J.18 Supply of Exterior Grade Poly-Urethene Polish 1 Litre 579
505 BMT-J.19 Supply of wood adhesive compound 1 Kg 165
506 BMT-J.20 Supply of Dry Powder Distemper 1 Kg 31
Supply of acrylic based Oil Bound washable Distemper having VOC (Volatile
507 BMT-J.21
Organic Compound ) content less than 50 grams/ liter
1 Kg 63
Page # 16
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Supply of synthetic polymer plastic emulsion paint having VOC (Volatile Organic
508 BMT-J.22
Compound ) content less than 50 grams/ liter.
1 Litre Deleted
Supply of synthetic polymer luxury plastic emulsion paint of superior grade having
509 BMT-J.23
VOC (Volatile Organic Compound ) content less than 50 grams/ liter.
1 Litre 316
510 BMT-J.24 Supply of Water proof Cement paint 1 Kg 37
Supply of acrylic exterior emulsion paint having VOC (Volatile Organic Compound )
511 BMT-J.25
content less than 50 grams/ liter.
1 Litre 143
512 BMT-J.26 Supply of water proof Cement paint pack 25 Kg 862
513 BMT-J.27 Supply of paint grade white lime for wash 25 Kg 402
514 BMT-J.28 Supply of anti-corrosive grade - 1 bitumen paint of black colour 1 Litre 380
515 BMT-J.29 Supply of grade-1 aluminium paint 1 Litre 190
Supply of ready mixed Synthetic Enamel paints in all shades Grade - I having VOC
516 BMT-J.30
(Volatile Organic Compound ) content less than 50 grams/ liter.
1 Litre 179
Supply of ready mixed Synthetic Enamel paints in all shades Grade - II having VOC
517 BMT-J.31
(Volatile Organic Compound ) content less than 50 grams/ liter.
1 Litre 136
518 BMT-J.32 Deleted Deleted
526 BMT-J.40 Supply of wall putty of White Cement or Polymer or Cement based 20 Kg 507
527 BMT-J.41 Altek / PMCC or Equivalent top coat high UV resistant exterior paint 25 Kg Deleted
528 BMT-J.42 PMCC / Deco orient base or Equivalent exterior Texture. 25 Kg 492
529 BMT-J.43 PMCC or Equivalent Gold line Exterior Texture 25 Kg 867
530 BMT-J.44 Deleted 1 Sqm Deleted
BMT-J.45 Deleted 1 Sqm Deleted
PARTICLE BOARDS
K. (Landing cost - including material VAT, loading, cost of conveyance,
539 BMT-K.01 Plain Particle Board: Interior Grade - 6 mm thick 1 Sqm 212
544 BMT-K.06 Plain Particle Board: Interior Grade - 21.4 mm thick 1 Sqm 388
547 BMT-K.09 Plain Particle Board: Exterior Grade- 8 mm thick 1 Sqm 266
548 BMT-K.10 Plain Particle Board: Exterior Grade-12 mm thick 1 Sqm 296
550 BMT-K.12 Plain Particle Board: Exterior Grade-21.4 mm thick 1 Sqm 455
553 BMT-K.15 Melamine faced Single Deco PPB- 8 mm thick 1 Sqm 551
Page # 17
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
558 BMT-K.20 Melamine faced Twin Deco PPB- 8 mm thick 1 Sqm 634
559 BMT-K.21 Melamine faced Twin Deco PPB- 12 mm thick 1 Sqm 725
560 BMT-K.22 Melamine faced Twin Deco PPB-18 mm thick 1 Sqm 838
563 BMT-K.25 Natural Colour-Insulating Board - 12 mm thick 1 Sqm 205
566 BMT-K.28 White Insulating Board - 12 mm thick 1 Sqm 251
569 BMT-K.31 Extra for veneered particle Board with commercial veneering on both sides. 1 Sqm Deleted
Extra for veneered particle Board with Veneering on both sides with one side teak
570 BMT-K.32
veneered and other side commercial veneered
1 Sqm Deleted
571 BMT-K.33 Extra for veneered particle Board with Teak veneering on both sides 1 Sqm Deleted
572 BMT-K.34 Medium Fibre Board: Interior Grade - 6 mm thick 1 Sqm 335
581 BMT-K.42 Medium Fibre Board: Exterior Grade - 6 mm thick 1 Sqm. 456
589 BMT-K.50 MDF Board: Plain-Interior - 9 mm thick 1 Sqm 307
595 BMT-K.56 MDF Board: Plain-Exterior - 9 mm thick 1 Sqm 402
601 BMT-K.62 MDF Board: Interior-One Side Laminated -9 mm thick 1 Sqm 482
607 BMT-K.68 MDF Board: Exterior-One Side Laminated -9 mm thick 1 Sqm 554
Page # 18
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
613 BMT-K.74 MDF Board: Interior-Both Side Laminated -9 mm thick 1 Sqm 550
619 BMT-K.80 MDF Board: exterior-Both Side Laminated -9 mm thick 1 Sqm 621
625 BMT-K.86 CEMENT BONDED PARICLE BOARD CONFORMING TO IS 14276-6 mm thick 1 sqm 167
626 BMT-K.87 CEMENT BONDED PARICLE BOARD CONFORMING TO IS 14276- 8 mm thick 1 sqm 202
634 BMT-K.95 PRE LAMINATED CEMENT BONDED PARTICLE BOARD-6 mm thick 1 sqm 472
635 BMT-K.96 PRE LAMINATED CEMENT BONDED PARTICLE BOARD-8 mm thick 1 sqm 510
636 BMT-K.97 PRE LAMINATED CEMENT BONDED PARTICLE BOARD- 10 mm thick 1 sqm 548
BMT- Cement Bonded Particale DESIGNER BOARD Available Designs 1. Lumber 2.
639
K.100 Quadra 3. Murk Standard size 8’X4’ 10’X4’- 6mm thick
1 sqm 169
640
1 sqm 308
641
1 sqm 276
642
1 sqm 330
643
1 sqm 435
BMT-
644
K.105
Cement Bonded Board conforming to IS:14862-2000 - 4mm Thick 1 Sqm 129
BMT-
645
K.106
BMT-
646
K.107
BMT-
647
K.108
BMT-
648
K.109
BMT-
649
K.110
Page # 19
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMT-
650
K.111
BMT-
651
K.112
BMT-
652
K.113
BMT-
653
K.114
Laminate Sheets - Glossy Finish: 1.00 mm thick 1 Sqm 320
BMT-
654
K.115
BMT-
K.116
BMT-
655
K.117
Laminate Sheets - Mat Finish: 1.00 mm thick 1 Sqm 340
BMT-
656
K.118
BMT-
657
K.119
BMT-
658
K.120
Teak Veneer Lamination - 4 mm thick - Pencil Grains 1 Sqm 357
BMT-
659
K.121
Teak Veneer Lamination - 4 mm thick - Natural Grains 1 Sqm 658
BMT-
660
K.122
8 mm thick V-Designer Board 1 Sqm 323
BMT-
661
K.123
50 mm thick V-PANEL 1 Sqm 850
BMT-
662
K.124
75 mm thick V-PANEL 1 Sqm 1020
PLYWOOD
L. (Landing cost - including material VAT, loading, cost of conveyance,
663 BMT-L.01 3 Ply - 4 mm thick Plywood(IS:303) MR Grade 1 Sqm 315
670 BMT-L.08 3 Ply - 4 mm thick Plywood(IS:303) BWR/BWP Grade 1 Sqm 360
BMT-L.13 9 Ply - 15 mm thick Plywood(IS:303) BWR/BWP Grade 1 Sqm 931
676 BMT-L.15 3 Ply-4 mm thick One side Teak Veneer Decorated Plywood (IS:1328) 1 Sqm 465
677 BMT-L.16 5 Ply - 6 mm thick One side Teak Veneer Decorated Plywood (IS:1328) 1 Sqm 606
680 BMT-L.19 5 Ply - 9 mm thick Both sides Teak Veneer Decorated Plywood (IS:1328) 1 Sqm 1014
681 BMT-L.20 9 Ply - 12 mm thick Both sides Teak Veneer Decorated Plywood (IS:1328) 1 Sqm 1182
M. CEILINGS, WALL PARTITIONS & WALL LININGS
Gypsum Board tiles of size notless than 0.595 M x 0.595 M of 12.5 mm thick as per
682 BMT-M.01
IS 2095 -1992
1 Sqm 217
Gypsum Board tiles of size notless than 0.595 M x 0.595 M of 9 mm thick as per IS
683 BMT-M.02
2095 -1992
1 Sqm 212
684 BMT-M.03 Gypsum Board Plain sheet 12.5 mm thick as per IS 2095 -1993 1 Sqm 197
Page # 20
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
685 BMT-M.04 G.I. Ceiling Angle - 25 mm x 10 mm x 0.55 mm 1 RM 59
686 BMT-M.05 G.I. Ceiling Section 51.5 mm x 26 mm x 10.5 mm x 0.55 mm thick 1 RM 67
687 BMT-M.06 G.I. Intermediate Section 45 mm x 15 mm x 15 mm x 0.9 mm 1 RM 66
688 BMT-M.07 G.I. Perimeter Channel - 20 mm x 27 mm x 30 mm (web) of 0.55 mm thick 1 RM 59
689 BMT-M.08 G.I.-Precoated Fine line Grid 25 mm x 25 mm x 0.7 mm 1 RM 32
690 BMT-M.09 G.I.-Precoated Fine line Grid 15 mm x 25 mm x 0.7 mm 1 RM 30
691 BMT-M.10 GI - Precoated - T-Sec- 24 mm x 38 mm x 0.7 mm thick 1 RM 43
692 BMT-M.11 Hot dipped GI Angle - Precoated - Grid: 19 mm x 19 mm 1 RM 31
693 BMT-M.12 Polyester painted GI - T Section - 24 x 32 mm 1 RM 40
694 BMT-M.13 Polyester painted GI - T Section - 24 x 25 mm 1 RM 36
695 BMT-M.14 Polyester painted GI - T Section - 24 mm x 27 mm 1 RM 37
696 BMT-M.15 Aluminium Angle : 24 mm x 24 mm 1 RM 20
697 BMT-M.16 Anodised Aluminium T Section : 24 x 24.5 x 2.4 mm 1 RM 27
698 BMT-M.17 Connecting Clips 1 Each 2
699 BMT-M.18 Rawl Plug 1 Each 2
700 BMT-M.19 6 mm Nylon Rawl Plug 1 Each 3
701 BMT-M.20 Soffit Cleats 1 Each 2
702 BMT-M.21 Drywall Screws - 25 mm 1 Each 2
703 BMT-M.22 Jointing Compound 1 Kgs 23
704 BMT-M.23 Jointing Paper Tape 1 RM 4
705 BMT-M.24 Drywall Top Coat 1 Litre 113
706 BMT-M.25 Universal Holding Clips 1 Each 3
707 BMT-M.26 4 mm Dia GI Connecting Rod 1 RM 9
708 BMT-M.27 2 mm Dia GI Connecting Rod 1 RM 8

14 mm - Mineral Fiber sheet 600 x 600 of Board / Tegular Edge tiles with a
709 BMT-M.28 Humidity Resistance of 80% RH, Average NRC 0.50, Light Reflectance >80%, 1 Sqm 349
Thermal Conductivity λ = 0.052 to 0.057 w/mk, Fire Performance Class 0/Class 1
15 mm - Mineral Fiber sheet 600 x 600 of Board / Tegular Edge tiles with a
16 mm - Tegular Edge 600 x 600 of Board / Tegular/ Micro look Edge tiles with a
712 BMT-M.31 12 mm - Mineral Fiber sheet 600 x 600 (Square / Tegular) Edge tiles 1 Sqm 270
Page # 21
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
713 BMT-M.32 15 mm - Mineral Fiber sheet 600 x 600 (Square / Tegular) Edge tiles 1 Sqm Deleted
Perforated wall panels channeled wood works sheets of width 128 mm, thickness of
16mm and length 2440 mm made of a high density particle board substrate with a
laminated facing as per the approved shade/
Species & Finish and a melamine balancing layer on the reverse side, with a
714 BMT-M.33
special perforation pattern fluted perforation on the visible surface with a minimum
1 Sqm 2173
sag resistance of RH90 and a fire rating class of 1 as per Part 7 of BS 476 with a
“tongue-and-grooved” edges and the back of the perforated panel is with sound
absorbing non-woven acoustical fleece
Vinyl Flooring Sheets/ tiles having a nominal total thickness of 2 mm with a wearing
surface impregnated polyurethane homogeneous mixture of PVC, Plasticizers,
715 BMT-M.34
Urethane, color pigments with wearing resistance and Fire Resistance as per
1 Sqm 996
standards
Vinyl Composition Floor Tiles of size 305 mm x 305 mm having an overall thickness
of 2.0mm with a wearing surface impregnated polyurethane homogeneous mixture
716 BMT-M.35
of PVC, Plasticizers, Urethane, color pigments with wearing resistance and Fire
1 Sqm 423
Resistance as per standards
Vinyl Flooring Sheets or tiles having a nominal total thickness of 1.5 mm with a
wearing surface impregnated polyurethane homogeneous mixture of PVC,
717 BMT-M.36
Plasticizers, Urethane, color pigments with wearing resistance and Fire Resistance
1 Sqm 1245
as per standards
718 BMT-M.37 Supply of Thermocole 12 mm thick sheets 1 Sqm 20
719 BMT-M.38 Supply of Thermocole 19 mm thick sheets 1 Sqm 37

Supply & fixing 75mm thick metal stud partition using 12.5 mm thick Gypboard
conforming to IS 2095-1982 screw fixed to either side to 48 mm studs of 0.55 mm
720 BMT-M.39 thick with the 50 mm floor and ceiling channel 0.55 mm and the joints duly finished 1 Sqm 890
with joint compound, paper tape and two coats Dry wall top coat as per
specification.
Providing wooden panelling 12 mm thick Novapan one side laminated sheet fixed
on wooden frame of BT wood size 50.8 mm x 25.4 mm (2"x1") at distance of
721 BMT-M.40 609.6mm (2'-0") intervals of both ways providing 3/4" x 1/2" (19.05 mm x 12.7 mm) 1 Sqm 1318
size BT wood ornamental cover beading and necessary screws, fevicol glue
complete for finished item of work.
Supply , manufacturing , installing of library Rack of 19 mm thick ISI marked
commercial ply All round boxing verticals, Horizontal for depth of 609.6mm (2'-0)
and shelves with 3.5 mm thick teak veneer covered with on exposed surface
externally and internally and each panels with 6mm thick ISI commercial ply with 3.5
mm thick teak veneer for glazed shutters teak wood size 55 mm x 28mm with 5 mm
722 BMT-M.41 thick glass fixed with ornamental beading and other ornamental beading is covered 1 Sqm 5643
as per drawing including brass hinges, ornamental handles, ball catchers, buffers,
locking system etc, and all the commercial ply exposed edges are to be covered
with 6 mm thick teak wood lipping. All the teak veneer and teak wood and
ornamental beading is coated with polishing and a coat of melamine finish etc,
complete for finished item of work.
725 BMT-M.42 Calcium Silicate Boards - 6mm thick 1 Sqm 168

Supply and Fixing 66mm thick metal stud partition screw fixed to either side of
48mm studs of 0.55mm thick with 50mm floor and ceiling channel 0.55mm and the
729 BMT-M.46 joints duly finished with joining compound, glass fibre tape and two coats dry wall 1 Sqm 1052
top coat as per specification finished Item of work- using 8mm thick Calcium
silicate boards
Page # 22
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
top coat as per specification finished Item of work - Using 10mm thick Calcium
silicate boards
top coat as per specification finished Item of work - Using 12mm thick Calcium
silicate boards
Supply and fixing of wall lining fixing to GI channels of perimeter channel 30mm x
27mm x 0.55 thick and ceiling channels of 51.1mm x 26mm x 10.5mm x 0.55mm
732 BMT-M.49 thick and fixing and finishing using joint compound and glass fibre tape complete 1 Sqm 624
finish as per specification without painting for finished item of work: using 8mmthick
Calcium silicate boards
finish as per specification without painting for finished item of work: Using 10mm
thick Calcium silicate boards
finish as per specification without painting for finished item of work: Using 12mm
thick Calcium silicate boards
Supply and Fixing 66mm thick metal stud partition using 2 layers of 12mm thick
Calcium silicate boards screw fixed to either side to 48mm studs of 0.55mm thick
with 50mm floor and ceiling channel 0.55mm.The boards joints are to be staggered
735 BMT-M.52 to avoid through passage. Ceramic wool of 50mm thick, 64kg/m3 density is to be 1 Sqm 3496
placed in cavity of the partition. The joints duly finished with joining compound,
glass fibre tape and two coats dry wall top coat as per specification with out
painting for finished item of work
Supplying and fixing of false ceiling using Plaster of paris Boards 12 mm thick with
736 BMT-M.53 standard GI ceiling angles, sections perimeter channels including cost and 1 Sqm 360
conveyance of all materials and labour charges etc complete
Supplying and fixing of false ceiling using Plaster of paris Boards 10 mm thick with
737 BMT-M.54 standard GI ceiling angles, sections perimeter channels including cost and 1 Sqm 300
conveyance of all materials and labour charges etc complete
738 BMT-M.55 Designer ceiling Cement Boards -thickness 3.2 mm 1 Sqm 189
739 BMT-M.56 High pressure steam cured Cement Boards 4 mm thick 1 Sqm. 101
748 BMT-M.65 High pressure steam cured designer Cement Boards 4 mm thick 1 Sqm. 148
749 BMT-M.66 High pressure steam cured designer Cement Boards 6 mm thick 1 Sqm. 218
Page # 23
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Supply and fixing of wall panelling (water, fire and Termite proof) with frame work
made of GI stud profile of size 48 x 40 10 x 0.6 mm thick placed at every 610 mm
C/C intervals fixed vertically in between floor and roof Ù’ track of size 50 x 30 x 0.6
mm thick duly fixed with self expansion screws and with 8 mm thick E-board / 6 mm
750 BMT-M.67
thick E-board classic cladded around with self tapping self embedding screws fixed
1 Sqm. 664
at every 300 mm (centres) leaving a 3 mm gap between two panels of width 2’-0”.
The Gap will be covered with a decorative beading. Surface will be given a smooth
finish over a coat of primer. - With 8 mm
Supply and fixing of wall panelling (water, fire and Termite proof) with frame work
made of GI stud profile of size 48 x 40 10 x 0.6 mm thick placed at every 610 mm
C/C intervals fixed vertically in between floor and roof Ù’ track of size 50 x 30 x 0.6
mm thick duly fixed with self expansion screws and with 8 mm thick E-board / 6 mm
751 BMT-M.68
thick E-board classic cladded around with self tapping self embedding screws fixed
1 Sqm. 709
at every 300 mm (centres) leaving a 3 mm gap between two panels of width 2’-0”.
The Gap will be covered with a decorative beading. Surface will be given a smooth
finish over a coat of primer. - With 6 mm Designer
Supply and fixing double skin partition with Frame work made of GI stud profile of
size 48 x 40 x 10 x 0.6 mm thick placed at every 610 mm C/C intervals and 915 mm
horizontal intervals duly fixed with self expansion screws, the E-board of 8 mm thick
cladded around with self tapping self embedding screws fixed at every 300 mm
752 BMT-M.69
(centres) leaving 3 mm gap between two panels of width 2’-0” (610 mm). The gap
1 Sqm. 974
will be covered with decorative moulding surface will be given a smooth finish over
cement primer. The rate is inclusive of cost and conveyance of all materials and
labour charges etc. complete.
Providing and fixing of 50mm thick SOLID WALL PANEL Sandwich panels made of
light Weight FRACC two 4mm thick non-asbestos fibre reinforced cement sheets on
either side of the lightweight concrete core composed of Portland cement binders
with tongue and groove arrangement. The bottom of the panel shall be fixed to the
floor channel made up of 1 mm thick GI channels of size 14x50x25 mm fixed to the
existing floor with 6x60mm nylon self expansion screws at 600 mm C/C and top of
the panel fixed with ceiling channel made out of 1mm thick GI Channel of size
753 BMT-M.70
38x50x38mm duly fixed to the existing ceiling with 6x60mm nylon self expansion
1 sqm 1191
screws at 600 mm C/C. All the tongue and groove joints of the panels have to be
properly cleaned and both the panels have to be fixed by applying the mixture of fly
ash and sodium silicate in between and Everest jointing compound all the exposed
joints. The rate includes cost of 50mm SOLID WALL PANELS, G.l. Floor and
ceiling channel. The panels can be flushed by using paper tape and Everest jointing
compound all complete
Providing and fixing of 75mm thick SOLID WALL PANEL Sandwich panels made of
light Weight FRACC two 4mm thick non-asbestos fibre reinforced cement sheets on
either side of the lightweight concrete core composed of Portland cement binders
with tongue and groove arrangement. The bottom of the panel shall be fixed to the
floor channel made up of 1 mm thick GI channels of size 14x75x25 mm fixed to the
existing floor with 6x60mm nylon self expansion screws at 600 mm C/C and top of
the panel fixed with ceiling channel made out of 1mm thick GI Channel of size
754 BMT-M.71
38x75x38mm duly fixed to the existing ceiling with 6x60mm nylon self expansion
1 Sqm. 1526
screws at 600 mm C/C. All the tongue and groove joints of the panels have to be
properly cleaned and both the panels have to be fixed by applying the mixture of fly
ash and sodium silicate in between and Everest jointing compound all the exposed
joints. The rate includes cost of 75mm SOLID WALL PANEL panels, G.l. Floor and
ceiling channel. The panels can be flushed by using paper tape and Everest jointing
compound all complete.
Page # 24
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Supply and fixing of CEMENT BONDED PARTICLE BOARDS (IS 14276) false
ceilingusing 8MM CEMENT BONDED PARTICLE BOARDS with galvanized and
pre painted steel T section of size 24mm x 38mm x 0.3 mm for main T duty pre
punched to accept cross T section of size 24mm x 30mm x 0.3 mm duly punched at
755 BMT-M.72 both ends for insertion into main T. The grid size will be 610mm x 610mm. The 1 Sqm 825
frame work (grid) is suspended to the roof by using G.I flat of 0.60mm or 14-gauge
G.I wire with necessary fixers to the roof and frame work. CEMENT BONDED
PARTICLE BOARDS lay on the grid. The cost inclusive of necessary hardware,
labor, one coat of primer (Both side) and two coats of smooth finish on visible side.
Supply and fixing CEMENT BONDED PARTICLE BOARDS(IS 14276) wall paneling
using 10 MM CEMENT BONDED PARTICLE BOARDS with frame work made of GI
stud section of size 48mm x 35mm x 0.55mm thick placed at every 610 mm C/C
intervals vertically and at 1200mm internals horizontally fixed to the wall by means
756 BMT-M.73 of self expansion screws and caps. CEMENT BONDED PARTICLE BOARDS is to 1 Sqm 1088
be fixed to frame by means of self taping screws placed at every 300 mm intervals
leaving 3mm gap between two panels. The cost inclusive of one coat of Altek
primer and two coats of Altek smooth finish and cost & conveyance of all materials,
labor charges etc. complete as per the direction of Engineer in charge.
Supply and fixing CEMENT BONDED PARTICLE BOARDS (IS 14276) double skin
partition using with 10 MM CEMENT BONDED PARTICLE BOARDS made out of
G.I. track section of size 50mmx 35mm x 0.55 mm for fixing to the roof and floor and
stud section of size 48mm x 35mm x 0.55mm placed in track section vertically at
610mm intervals and at 1200mm intervals horizontally fixed to the wall by means of
757 BMT-M.74 self expansion screws and caps to the wall and roof. CEMENT BONDED 1 Sqm 1590
PARTICLE BOARDS is to be fixed both sides of frame work by using self taping
screws fixed at every 300mm intervals to the frame work leaving 3 mm gap
between two panels. The cost inclusive with one coat of Alltek primer and two coats
of Alltek smooth finish and cost and conveyance of all materials to site, labor
charges etc., complete as per the direction of Engineer in charge.
Supply and fixing of CEMENT BONDED PRE-LAMINATED PARTICLE BOARDS

double skin partition using with 10 mm CEMENT BONDED PRE-LAMINATED
PARTICLE BOARDS made out of G.I track section of size 50 mm x 35mm x
0.55mm for fixing to the roof and floor and stud section of size 48mm x 35mm x
0.55mm placed in track section vertically at 610mm intervals and at 1200mm
758 BMT-M.75
internals horizontally. The frame is fixed by means of self expansion screws and
1 Sqm 2190
caps to the wall / roof. LAM is to be fixed both sides of the frame work by using
2mm thick electro plated CR flat section leaving 3mm gap between two panels. The
cost inclusive of cost and conveyance of all materials to sites, other materials
incidentals and labour charges as per the direction of Engineer in charges.
wall paneling using 12MM CEMENT BONDED PRE-LAMINATED PARTICLE
BOARDS with frame work made of G.I stud section of size 48mm x 35mm x
0.55mm thick placed at every 610mm intervals vertically and at 1200mm internals
759 BMT-M.76 horizontally fixed to the wall by means of self expansion screws and caps. LAM is 1 Sqm 1654
to be fixed to frame by means of self-taping screws placed at every 300mm
intervals leaving 3mm gap between two panels. The cost inclusive of Conveyance
of materials, Labor charges etc., complete as per the direction of Engineer in
charge
aluminum glazed partitions using 10MM CEMENT BONDED PRE-LAMINATED
PARTICLE BOARDS and 5.00 mm thick plain glass to full height. Using with LAM
to a height of 0.91 meter at bottom panel and remaining height with glass and
760 BMT-M.77 aluminum sections anodized to 12 to 15 microns and of sections of size 37mm x 1 Sqm 2727
62mm and 1.5mm thickness with one meter centre to centre duly fixed with clip
beading on both sides including fixing the frame to pillars by M.S. flats, bolts and
nuts including cost and conveyance of all materials etc., complete as directed
during execution.
Page # 25
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Providing and fixing 50mm thick SEMI HEIGHT SOLID PVC PARTITION consisting
of 49mm sandwich PVC panel made out of 36mm high density expanded
polystyrene sheet(E.P.S.-Thermocole) stuck on both side with 2mm thick
plain/printed /prelam PVC rigid foam sheets reinforced with frame work made from
35mmX5mm M.S. Angle. In between two M.S. Angles 5mm thick
plain/printed/prelam heat moulded “Rajshri” PVC ‘C’ channel of size 50X100mm
with feathered edges shall be fixed on the floor & 50X75mm with feathered edges
plain/printed /prelam PVC ‘C’ channel. In between adjoining EPS sandwiched PVC
761 BMT-M.78
partitions panel 5mm thickX75mm width plain/printed/prelam PVC sheet feathered
1 sqm 2405
at edges shall be stuck on front & back face using solvent cement etc. in places
where two partitions meet to from an ‘L’ shape the panels are joined 5mm thick
plain/printed/prelam heat moulded “Rajshri” PVC ‘L’ section of size 75mmX75mm
with feathered edges shall be fixed on front & back side. This is done to maintain
the symmetry of design. An additional 5mm thick PVC strip of 40mm width is to be
stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive, complete
as per direction of Engineer-in-Charge, manufacture’s specification & drawing
Providing and fixing INSULATED PVC WALL PANELING shall consist of PVC
insulated panels having wall thickness of 1mm /1.5mm/2mm PVC sheet and the
desired thickness of EPS (dependent on the insulation required) screwed into the
wall using screws of adequate length. The screws shall be placed at a distance of
150mm and shall be 25mm from the edge of the insulated panel on all from sides of
762 BMT-M.79 the panel. The PVC strips of 5mm thick PVC sheet of width 75mm feathered at the 1 sqm 1591
edges shall be stuck using solvent cement adhesive at the places where two panels
are joined, so a to cover the screw of both the panels, using solvent cement. 90
heat bent strips of 5mm thick PVC sheets of width 75mm X75mm feathered at the
edges shall be stuck at wall joints / pillars etc. , complete as per direction of
Engineer-in-Charge, manufacture’s specification & drawing
Providing and fixing plain PVC rigid foam sheet wall panelling of thickness 5mm
consisting of panels having size 1220mm X2440mm stuck on inner frame work of
25mm wide strips of 5mm thick PVC rigid foam sheet. The strips should have in
their centre a grove of 6mm width and 2mm depth for sinking the head of the screw
used to fix the strips to the wall and should be placed vertically at equal intervals of
405/407mm centre to c entre. The PVC strips shall be fixed to the wall using 65mm
long M.S. screws through the groove in the strip by using PVC fasteners. The
763 BMT-M.80 distance between two screws shall not be more than 300mm. a groove of 2mm may 1 sqm 1511
be left at the joint of two panels for aesthetic looks. This framework is done for
making existing wall surface in ensured level and for sticking the wall panelling
sheet (panel) on it. The exact size of the panel and correspondingly of the grid May
be varied depending n the size of the wall. However it must ensured that a strips of
5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the
places where two panels are joined, using solvent cement. , complete as per
direction of Engineer-in-Charge, manufacture’s specification & drawing
Providing and fixing false ceiling consisting of 600mmX600mm, Solid PVC
insulation panels having wall thickness of 1mm thick plain PVC rigid foam sheet
and EPS as defined in of desired thickness depending on insulation required shall
be insert in a frame work made using anodized aluminium Tee section of sizes
1”X1” (25X25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2’X2’
764 BMT-M.81
(600X600mm). The aluminium framework is supported from the ceiling with the help
1 sqm 1100
of G.I. hook and G.I. wire/6mm.M.S. rods of required sizes to maintain proper level
etc. the aluminium framework is supported on side wall with the use of aluminium
1”X1” (25X25mm) angles, complete as per direction of Engineer-in-Charge,
manufacture’s specification & drawing
Mineral Fibre Ceiling Tile of 0.595 mm x 0.595 mm of 13 mm thick Square Edge -
765 BMT-M.82
Fissura Fine Model
1 Sqm 300
766 BMT-M.83
Speckle Model
1 Sqm 335
767 BMT-M.84
Textura Model
1 Sqm 370
Mineral Fibre Ceiling Tile of 0.595 mm x 0.595 mm of 15 mm thick Standard
768 BMT-M.85
Regular Edge
1 Sqm 379
Page # 26
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Mineral Fibre Ceiling Tile of 0.595 mm x 0.595 mm of 15 mm thick Fissura Fine

769 BMT-M.86
Model
1 Sqm 388
770 BMT-M.87 Mineral Fibre Ceiling Tile of 0.595 mm x 0.595 mm of 15 mm thick Speckle Model 1 Sqm 405
771 BMT-M.88 Mineral Fibre Ceiling Tile of 0.595 mm x 0.595 mm of 15 mm thick Textura Model 1 Sqm 439
Supply and fixing of PVC false ceiling on MS/GI made skeleton framework. The
frame shall be 24 X 48mm MS tube section fixed along with the wall. The entire
frame work shall be concealed with PVC section having overall dimensions of 6 X
772 BMT-M.89
250mm with a wall thickness of 1mm ± 0.3mm with tongue and groove system,
1 Sqm. 1222
provided with necessary arrangements for electrical connections, complete, for
finished item of work.
Supply and fixing of wall panelling on the framework of wooded rippers of 24 X
24mm of required size. The entire framework shall be panelled with PVC section
having overall dimensions of 6 X 250mm with a wall thickness of 1mm ± 0.3mm.
773 BMT-M.90
The panels are joined with tongue and groove system. Necessary cut-outs for
1 Sqm. 1157
electrical connections to be provided at required places complete, for finished item
of work.
Supply and fixing of PVC Double Skin Partition. The entire framework shall be
carried out by mild steel section having overall dimensions of 24 X 48mm with a wall
thickness of 1.2mm. The entire framework shall be concealed with PVC section
774 BMT-M.91 having overall dimensions of 6 X 250mm with a wall thickness of 1mm ± 0.3mm Sqm. 2031
both sides. Glass provision/Door provision can be provided along the partition
wherever required. Partitions can be made full or half as per requirement complete,
for finished item of work.
NCL or equivalent Partitions: Supply and fixing of partitions made of seccolor pre-
painted steel (base steel as per IS 513 of 0.58 mm thick ‘D’ quality, galvanized as
per IS 277 with Zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns
thick, finish painted with a polyester paint of 12-16 microns thick alkyd backer.
Section for outer frame should be 46x52mm, section for shutter should be
46x46mm, section for mullion should be 46x70mm, section for beading should be
18x25mm and section for middle and bottom rail (Lock Rail and Kick Rail) of size
775 should be 23x130mm. The partition should be paneled with 9mm pre-laminated
particle board to a height of 0.91m from the bottom, and remaining height with 5mm
thick plain glass With Ethyl Propylene Diamine Monomer (EPDM) Gaskets. The
sections are to be cut to length, mitre joined with corner bracket Centre mullions are
to be fixed using mullion cap. Gaskets made of Ethyl Propylene Diamine Monomer
(EPDM). Corner brackets made of CRCA with zinc phosphate. Mullion caps made
of Glass filled nylon. The above frames should be fixed to the concrete/masonry
wall by means of self expanding screws, and complete for finished item of work.
Fixed Partition: Outer frame section size of 46x52mm, mullion section should be of
776 BMT-M.92
46x70mm, fixed beading should be of 18x25mm.
1 sqm 3620
Fixed Partition with Door: Outer frame section size of 46x52mm, mullion section
should be of 46x70mm, fixed beading should be of 18x25mm, section for shutter
777 BMT-M.93
should be of 46x46mm and section for middle & bottom should be of size
1 sqm 4128
23x130mm
Supply & fixing of 50 mm thick sandwiched panel of two fiber-reinforced cement
sheets enclosing a lightweight concrete core composed of portland cement, binders
and a mix of silicaceous and micaceous material aggregate having Tongue and
778 BMT-M.94
Groove joint for partitions and walls using G.I. Flooring & Ceiling channels,
Sqm. 1105
hardware, Labour, transportation, wastages, etc., as a complete item of work
excluding finishing, fittings & fixtures.
Supply & fixing of 75 mm thick sandwiched panel of two fiber-reinforced cement
sheets enclosing a lightweight concrete core composed of portland cement, binders
and a mix of silicaceous and micaceous material aggregate having Tongue and
779 BMT-M.95
Groove joint for partitions and walls using G.I. Flooring & Ceiling channels,
Sqm. 1403
hardware, Labour, transportation, wastages, etc., as a complete item of work
excluding finishing, fittings & fixtures.
Supply of sandwiched panel of two fiber-reinforced cement sheets enclosing a
lightweight concrete core composed of Portland cement, binders and a mix of
780 BMT-M.96
silicaceous and micaceous material aggregate panels of 50mm thick x 600mm
1 Sqm. 765
standard width x 2400mm, 2700mm, 3000mm & 3300mm lengths
Page # 27
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Supply of sandwiched panel of two fiber-reinforced cement sheets enclosing a

lightweight concrete core composed of Portland cement, binders and a mix of
781 BMT-M.97
silicaceous and micaceous material aggregate panels of 75mm thick x 600mm
1 Sqm. 999
standard width x 2400mm, 2700mm, 3000mm & 3300mm lengths
Providing & fixing Pre-coated G.I. Wall angle size 22mm X 20mm X 0 .4 mm thick of
3050mm long fixed to the brick wall/ partition at the perimeter of ceiling with nylon
sleeves and screw at 610 mm centres. Then suspending main G…! Frame "T"
section size of 32mm X 24mm X 0.30mm thick of 3600mm long from soffit in one
direction with the help of Rawl Plug and G.!. Wire/Rod of 3mm diameter with
1220mm centres G.!. Cross "T" section of size 25mm X 24mm X 0.30mm thick of
782
600mm long is inserted into the slots provided in main "T" at 600mm centres to form
a grid of 600mm X 600mm. 12/ 15mm tiles of size600mm X 600mm can be laid on
to the grid etc. tiles with a Humidity resistance of 95% RH,Average NRC 0.55 to
0.60,Light reflectance >85% K value 0.052-0.57 ,Fire performance class O/Class 1
(BS 476) along with surface 3 coats of white paint as directed by department
officers.
783 BMT-M.98 Regular Pin Holes PH-001 (Square & Tegular Edge) 12mm 1 Sqm. 505
784 BMT-M.99 Fin Fisured Model FF-002 (Square & Tegular Edge) 12mm 1 Sqm. 505
BMT-
785
M.100
Random Holes AF-003 (Square & Tegular Edge) 12mm 1 Sqm. 505
BMT-
786
M.101
Random Pin Holes APH-004 (Square & Tegular edge) 12 mm 1 Sqm. 505
BMT-
787
M.102
Sand Face ASF-005 (Square & Tegular Edge) 12mm 1 Sqm. 587
BMT-
788
M.103
Regular Pin Holes PH-001 (Square & Tegular Edge) 15mm 1 Sqm. 595
BMT-
789
M.104
Fin Fisured Model FF-002 (Square & Tegular Edge) 15mm 1 Sqm. 595
BMT-
790
M.105
Random Holes AF-003 (Square & Tegular Edge) 15mm 1 Sqm. 595
BMT-
791
M.106
Random Pin Holes APH-004 (Square & Tegular Edge) 15 mm 1 Sqm. 595
BMT-
792
M.107
Sand Face ASF-005 (Square & Tegular Edge) 15mm 1 Sqm. 684
BMT-
793
M.108
Vinyl laminated MPL Gypsum Panels 600 X 600 X 9 mm 1 Sqm. 243
Supply and fixing of wall panelling of 8 mm thick V-BOARD(IS 14862)provided with
frame work made of GI stud profile of size 48 x 40 x 10 x 0.55 mm thick placed at
every 610 mm C/C intervals fixed vertically in between floor and roof ‘U’ track of
BMT-
794
M.109
size 50 x 30 x 0.6 mm thick duly fixed with self-tapping, self-embedding screws fixed 1 Sqm 731
around at every 300 mm (centres) leaving a 3 mm gap. The Gap will be covered
with a decorative beading or jointing compound. Surface will be given a smooth
finish with one coat of primer. Inclusive of all taxes.
Supply and fixing of wall panelling of 10 mm thick V-BOARD(IS 14862) provided

with frame work made of GI stud profile of size 48 x 40 x 10 x 0.55 mm thick placed
at every 610 mm C/C intervals fixed vertically in between floor and roof ‘U’ track of
BMT-
795
M.110
size 50 x 30 x 0.6 mm thick duly fixed with self-tapping, self-embedding screws fixed 1 Sqm 765
around at every 300 mm (centres) leaving a 3 mm gap. The Gap will be covered
with a decorative beading or jointing compound. Surface will be given a smooth
finish with one coat of primer. Inclusive of all taxes.
Supply and fixing double skin 8mm thick V- BOARD(IS 14862) partition with Frame
work made of GI stud profile of size 48x40x10x 0.55 mm thick placed at every 610
mm C/C intervals and 1220 mm horizontal intervals duly fixed with self-expansion
BMT- screws, the V- Board of 8 mm thick cladded around with self-tapping self-
796
M.111 embedding screws fixed at every 300 mm (centres) leaving a 3 mm gap. The Gap
1 Sqm 1161
will be covered with a decorative moulding surface will be given a smooth finish with
one coat of primer. The rate Inclusive of cost and conveyance of all materials and
labour charges etc., Complete.
Page # 28
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Supply and installation of V-PLANKS(IS 14862) of size 150 x 3000 x 8mm

manufactured by on to an existing steel structure made using Top hat profile /
furring channel of 51mm web, 22mm flange of 0.5mm thick (minimum) fastened to
the plastered brick wall using anchor bolts / anchor screws, spaced at every 2’
(610mm). V planks are screwed to the furring channel using self-drilling screws of
BMT-
797
M.112
8g x 25mm (minimum) at every 2’ at distance of 15mm from the edge of the plank. 1 Sqm 867
V Planks fixing is started from the bottom, followed by next plank overlapped by
25mm on to the bottom plan thereby hiding the screws perfectly and continued up to
the top. Water based cement primer should be applied to the planks before
finishing with the exterior grade paints. (up to 3 floors) Above 3 floors labour
charges will be extra and steel grid will change.
Supply and installation of V- PLANKS(IS 14862) of size 200 x 3000 x 8mm thick
manufactured by on to an existing steel structure made using Top hat profile /
furring channel of 51mm web, 22mm flange of 0.5mm thick (minimum) fastened to
the plastered brick wall using anchor bolts / anchor screws, spaced at every 2’
(610mm). V planks are screwed to the furring channel using self-drilling CSK
BMT-
798
M.113
screws of 8g x 25mm (minimum) at every 2’ at distance of 15mm from the edge of 1 Sqm 816
the plank. V- Planks fixing is started from the bottom, followed by next plank
overlapped by 25mm on to the bottom plan thereby hiding. the screws perfectly and
continued up to the top. Water based cement primer should be applied to the
planks before finishing with the exterior grade paints. (up to 3 floors) Above 3 floors
labour charges will be extra and steel grid will change.
DRY WALL PARTITION WITH 50 MM THICK V-PANEL Deleted
Supply& fixing of 50 mm thick V-PANELcomprise of two 5mm thick V-Boards
(asbestos-free fibre reinforced cement sheetsconforming toIS 14862) strongly
bonded with core material which is light weight concrete mix of Portland cement,
expanded polystyrene bead aggregates and admixture. V-Panels with unique semi-
circular Tongue & Groove Joining System provides better stability, rapid installation
and better workability. The bottom of the panel shall be fixed to the floor channel
BMT- made up of 1 mm thick GI channels of size 28x52x31 mm fixed to the existing floor
799
M.114 with 6x60mm nylon self-expansion screws at 600 mm C/C and top of the panel fixed
1 Sqm 1318
with ceiling channel made out of 0.8 mm thick GI Channel of size 31 x 52 x 31 mm
duly fixed to the existing ceiling with 6x60mm nylon self-expansion screws at 600
mm C/C. All the tongue and groove joints of the panels have to be properly cleaned
and both the panels have to be fixed by applying the jointing compound in all the
exposed joints. The rate includes cost of 50mm V-PANELS, G.l. Floor and
ceilingChannel.
Supply& fixing of 75 mm thick V-PANELcomprise of two 5mm thick V-Boards

(asbestos-free fibre reinforced cement sheetsconforming toIS 14862) strongly
bonded with core material which is light weight concrete mix of Portland cement,
expanded polystyrene bead aggregates and admixture. V-Panels with unique semi-
circular Tongue & Groove Joining System provides better stability, rapid installation
and better workability. The bottom of the panel shall be fixed to the floor channel
BMT- made up of 1 mm thick GI channels of size 28x77x31 mm fixed to the existing floor
800
M.115 with 6x60mm nylon self-expansion screws at 600 mm C/C and top of the panel fixed
1 Sqm 1573
with ceiling channel made out of 0.8 mm thick GI Channel of size 31x77x31 mm
duly fixed to the existing ceiling with 6x60mm nylon self-expansion screws at 600
mm C/C. All the tongue and groove joints of the panels have to be properly cleaned
and both the panels have to be fixed by applying the jointing compound in all the
exposed joints. The rate includes cost of 75mm V-PANELS, G.l. Floor and
ceilingChannel.
BMT- CEMENT BONDED PARTICLE PLANK- 8 mm- Available size-150 mm X2440mm
801
M.116 and 200mm X 2440mm
1 Sqm 568
DOORS
N. (Landing cost - including material VAT, loading, cost of conveyance,
Page # 29
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size
50 x 47mm with a wall thickness of 5mm, made out of extruded 10 mm rigid PVC
foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets
of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced
804 BMT-N.01 with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the 1 Rm 281
wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners.
A minimum of 4nos. of screws to be provided for each vertical member & minimum
2nos. for horizontal member etc. complete as per manufacturers specification and
direction of Engineer-in-Charge for finished item of work
Providing and fixing 30mm thick Solid panel PVC door shutter consisting of frame
made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles,
& 15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel
primers of approved make and manufacture. M.S. frame shall be covered with 5mm
thick heat moulded PVC ‘C’ channel of size 30 x 50mm forming stiles, and 5mm
thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and
805 BMT-N.02 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & 1 Sqm. 1875
bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded /
sealed to the stiles & rails with 30mm wide x 5mm thick PVC sheet beading on
either side, and joined together with solvent cement adhesive etc. An additional
5mm thick PVC strip of 20mm width is to be stuck on the interior side of the ‘C’
Channel using PVC solvent adhesive. Complete as per direction of Engineer-in-
charge, manufacturer’s specification & drawing for finished item of work .
Providing and fixing 30mm thick BRAND FACTORY MADE BOTHSIDE PRELAM
SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of MS. Tubes
of 19gauge thickness and size of 19mmX19mm for stiles, top and bottom rails. MS.
Frame shall have a coat of steel primers of approved make and manufacture. MS.
Frame covered with 5mm thick heat moulded “Rajshri” Prelam Pac ‘C’ channel of
size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall
be tapered in 450 angle on either side forming stiles; and 5mm thick, 95mm wide
Rajshri Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be
tapered in 450 on the inner side to form top and bottom rail 115mm wide Rajshri
806 BMT-N.03 Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered on 1 sqm 2296
both sides to form lock rail. Top, bottom and lock rail shall be provided either side of
the panel. 10mm (5mmX2) thick, 20mmwide cross Pac sheet shall be provided as
gap insert for top and bottom rail. Panelling of 5mm thick both side Prelam Pac
sheet to be fitted in the MS. Frame welded/ sealed to the stiles & rails with
7mm(5mm+2mm) thick X 15mm wide Pac sheet beading on inner side, and joined
together with solvent cement adhesive etc. an additional 5mm thick Pac strip of
20mm width is to be stuck on the interior side of the ‘C’ channel using Pac solvent
cement adhesive etc. complete as per direction of Engineer – in-charge,
manufacture specification and drawing.
Providing and fixing 30mm thick BRAND FACTORY MADE SOLID SINGLE SIDE
PRELAM PANEL PVC DOOR SHUTTER consisting of frame made out of MS.
Tubes of 19gauge thickness and size of 19mmX19mm for stiles, and 15mmX15mm
for top and bottom rails. The MS. Frame shall have a coat of steel primers of
approved make and manufacture. MS. Frame covered with 5mm thick heat
moulded “Rajshri” single side Prelam Pac ‘C’ channel of size 30mmX50mm to form
stiles.5mm thick& 75mm wide single side prelim Pac sheets shall be for the top,
bottom and lock rails. Panelling of 5mm thick one side Pac sheet to be fitted in the
807 BMT-N.04 MS. Frame and sealed to the front (prelam side) stiles and rails (which should have 1 sqm 2083
a 5mm 45 bent portion as beading) and attached to the back(white/ivory) stiles and
rails which should have a 10mm 900 bent portion as beading ) using 2nos. 15mm
wide X 5mm thick Pac sheet beading inside the 90 bent beading. All stiles, rails and
beadings are to be joined to the panel using solvent cement etc. an additional 5mm
thick Pac strip of 20mm width to be stuck on the interior side of the ‘C” channel
using Pac solvent cement adhesive and 10mm(5mmX2) thick, 20mm wide cross
Pac sheet to be fitted as gap insert for top and bottom rail etc. complete as per
direction of Engineer –in-Charge, manufacture specification and drawing.
Page # 30
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
SUPPLY & FIXING or equivalent SINGLE SIDE PRELAM SOLID PANEL PVC
DOOR FRAME (CHOUKHAT) Providing and fixing factory made Pac single side
Prelam door frame of the size 50X47 mm with a wall thickness of 5mm, made out of
extruded 5mm rigid Pac single side prelam sheet, meter cut at two corners and
joined with 2nos. of 150mm long brackets of 1515mm MS.Square tube. The two
808 BMT-N.05
vertical door profiles are to be reinforced with 19X19mm MS. square tube of
1 Rm 289
19guage. The door frame shall be fixed to the wall using 65/100mm long MS.
Screws through the frame by using Pac fasteners. a minimum of 4nos. of screws to
be provided for each vertical member and minimum 2nos. for horizontal member
etc. complete as per manufacture specification and direction of Engineer-in-charge.
Providing and fixing 35mm thick BRAND FACTORY MADE MOULDED DOOR
SHUTTER consisting of sold core single leaf flush door of 30mm thickness, lipped
with 15mm (5mmX3) thick X 30mm width on one stiles and top rails and 10mm
(5mmX2) thick X 30mm width on the other stiles and bottom rails. The inner panel
laminated with 2mm thick termite proof, water proof and fire resistant moulded Pac
809 BMT-N.06
sheet with 2,4,6 raised panel design in different panel and / or prelam colours on
1 sqm 2466
one side after routing the moulded design on flush door and 2mm prelam Pac sheet
on other side using rubber adhesive on flush door and solvent cement adhesive on
Pac lipping etc. complete as per direction of Engineer-in-Charge, manufacture
specification and drawing
MOULDED PVC DOOR – WOOD FREE Providing and fixing 30mm thick Rajshri
Brand factory made Moulded door shutter- wood free consisting of frame made out
of MS. tubes 19gauge thickness and size of 25mmX25mm for stiles, top and bottom
rails. MS. Frame shall have a coat of steel primers. The inner panel shall consist of
25mm thick High density EPS conforming to IS 4671-1984 bounded with 2mm thick
termite proof, water proof and fire resistant moulded Pac sheet with 2,4,6 raised
panel design in different plain and / or prelam colours after routing to the moulded
810 BMT-N.07
design on one side and 2mm plain and / or prelam Pac sheet on other side of the
1 sqm 2105
EPS. The edge of panel to be sealed with lipping of 10mm wide PVC sheet bottom
(made by sticking 2 rigid foam sheet of 5mm thickness using Pac solvent cement)
and stiles sides 25mm(5mmX5) thick and 30mm width Pac sheet fitted along Ms.
Tube for lock provision for lock height 5mm thick Pac sheet of size 150mmX100mm
fixed with upper and lower face of inner side of EPS Panel etc. Complete as per
direction of Engineer – in-Charge, manufacture specification and drawing
Providing and fixing 30mm thick BRAND FACTORY MADE WIRE MESH SOLID
PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge
thickness and size of 19mmX19mm for stiles and 15mm for top, lock & bottom rails.
MS. Frame shall have a coat of steel primers of approved make and manufacture.
19mmX19mm M.S. square tubes shall be covered with 5mm thick heat moulded
“Rajshri” PVC ‘C’ channel of size 30mm thickness, 90mm width out of which 75mm
shall be flat and 15mm shall be flat and 15mm shall be bent in 900 on the inner side
to from top and bottom rail land 130mm wide PVC sheet out of which 100mm shall
be flat and 154mm shall be bent in 900 on both side to from lock rail,
811 BMT-N.08 10mm(5mmX2) thick, 20mm wide cross PVC sheet as gap insert for top rail & 1 sqm 1871
bottom rail. Panel will be of G.I.wire mesh of 24gauge to be fitted in by ’C’ channel
of size 35mm X10mm on the either side in the stiles. The inner side ‘C’ channel is
fixed by 19mmX19mm MS. Tube on both sides with screws. The wire mesh in top
bottom & lock rail is sealed with15mm X 15mm tube with G.I.wire 10mm(5mmX2)
thick PVC strip of 25mm width is to be stuck& nails on both side of G.I. wire mesh
interior at the top, bottom & lock rail. An additional 5mm thick PVC srip of 20mm
width is to be stuck on the interior side of the ‘C’ channel using PVC solvent
cement adhesive etc. complete as per direction of Engineer-in-charge,
manufacturer’s specification & drawings
Providing and fixing PVC door cladding to the flush doors shutters . For the new
doors it shall be pasted with Fevicol SSR 998 or nailed to the old doors. complete
812 BMT-N.09
as per direction of Engineer –in – charge, manufacturers specification and drawing -
1 sqm 321
1 mm thick
813 BMT-N.10
1 sqm 366
1.5 mm thick
Page # 31
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
814 BMT-N.11
1 sqm 412
2.0 mm thick
Flush door shutters, solid bond wood block board type with teak ply on both faces.:
815 BMT-N.12
25 mmthick conforming to IS:2202
1 sqm 1142
816 BMT-N.13
1 sqm 1181
817 BMT-N.14
1 sqm 1272
Flush door shutters, solid bond wood block board type with commercial ply on both
818 BMT-N.15
faces.: 25 mmthick conforming to IS:2202
1 sqm 582
819 BMT-N.16
1 sqm 656
820 BMT-N.17
1 sqm 718
821 BMT-N.18
1 sqm 855
Flush door shutters, solid bond wood block board type with teak veneer on one face
822 BMT-N.19
and commercial ply on another face (lipping): 20 mmthick conforming to IS:2202
1 sqm 767
823 BMT-N.20
1 sqm 855
824 BMT-N.21
1 sqm 957
825 BMT-N.22
1 sqm 1026
826 BMT-N.23
1 sqm 1094
Supply and fixing of E-board door shutter with alround style “U” lipping size 15 x 18
x 15 mm made from 0.8 mm thick powder coated cold rolled steel profiles with 16
mm thick E-board with necessary screws fixed at 1’-0” interval 250 mm long
827 BMT-N.24 aldrops 2 Nos. M.S. nickel coated 250 mm long 1 No. M.S. Tower bolts including 1 Sqm. 937
cost and conveyance of all materials at site and applying 1 coat of primer, 2 coats of
luppum and 2 coats of synthetic enamel paint as per approved design for finished
item of work.
Providing and fixing frame made from 1.2 mm powder coated cold rolled steel
profiles of overall section size of 60 mm x 45 mm with 21 mm rivet for shutter with
necessary stiffeners hinges and screws. E-board shutter with alround Ù’ lipping of
size 15 X 18 X 15 mm made from 0.8 mm thick CRCA powder coated steel profile
828 BMT-N.25
with 16 mm thick E-board with necessary screws fixed at every 1’-0” interval 250
1 Sqm. 1429
mm long aldrops 2 Nos. MS Nickel coated 250 mm long 1 No. MS tower bolt
including cost and conveyance. One coat of primer, 2 coats of luppum and 2 coats
of synthetic enamel paint as per approved colour, labour charges etc.
Supply and fixing of Cement Bonded Particle Board (IS 14276) cup board frames
and shutters and using 16mm Cement Bonded Particle Board duly painted both
sides with one coat of primer and two coats of synthetic / enamel paint of approved
shade and brand including fixing of hardware like M.S. powder coated Piano hinges
829 BMT-N.26
of size 18mm x 18mm, brass ball catches, Aluminum tower bolts and handles ,
1 sqm 1822
Godrej locks, Fevicol, screws and nails including cost and conveyance of all
materials, labor charges, all incidental and operational charges etc., complete for
finished item of work at site as per the directions of Engineer in Charge.
Page # 32
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Supply and fixing Cement Bonded Particle Board (IS 14276) single door shutter
using with 16MM Cement Bonded Particle Board with all-round "U" section of size
12mmx18mmx12mm made from 0.6 mm thick galvanized, color quoted cold rolled
steel profiles with necessary screws fixed at every 304.8 mm intervals. The cost
830 BMT-N.27
inclusive of MS Nickel coated Aldrops of size 255 mm long 2 Nos., 200 mm long
1 Sqm 1440
tower bolts 1 No., 125 mm handles 2 Nos. 300 mm long "T" hinge cost and
conveyance of all materials at site and applying 1 coat primer, 1 coat of luppum and
2 coats of synthetic enamel paint as per approved design for finished item of work.
Supply and fixing of Cement Bonded Particle Board(IS 14276) door shutters using
with 16MM Cement Bonded Particle Board with all round style “U” size of
20mmx18mm x20mm made from 0.6mm thick galvanized pre-painted cold rolled
steel profiles with Cement Bonded Particle Board separating two shutter with
30mmx18mmx30mm Stepped lipping with necessary screws fixed at every 1’-0”
831 BMT-N.28
(304.8mm) intervals. Ms Nickel coated 250 mm long aldrops 2 no’s, MS powder
1 Sqm 1954
coated 250mm long tower bolt 2no’s , & 2no’s MS powder coated 125 mm long grip
handle. Including cost and conveyance of all materials at site and applying one coat
of primer, 2 coats of lappum and 2 coats of synthetic enamel paint as per approved
design for finished item of work.
Supply and fixing of BISON LAM single door shutter using 16MM CEMENT
BONDED PRE-LAMINATED PARTICLE BOARDS with all round section “U” size of
mm thick galvanized pre-painted cold rolled steel profiles BISON LAM with
necessary screws fixed at every 1’0” ( 304.8mm) intervals. The cost inclusive of MS
832 BMT-N.29
Nickel coated 250mm long aldrops 2 no’s , MS powder coated 250mm long tower
1 Sqm 1701
bolt 1 no’s, 2no’s MS powdercoated 125mm long grip handle, 1 no’s M.S.P.C. Door
stopper. Including cost and conveyance of all materials at site labour charges etc.,
complete finished item of work.
Supply and fixing of Cement Bonded Particle Board (IS 14276) LAM double door
shutter using 16MM CEMENT BONDED PRE-LAMINATED PARTICLE BOARDS
with all round “U” section size of 20mm x 18mm x 20mm made from 0.6mm thick
galvanized pre-painted cold rolled steel profiles with Cement Bonded Particle Board
833 BMT-N.30 (IS 14276) LAM separating two shutter with 30mm x 20mm x 30mm stepped lipping 1 Sqm 2205
with necessary screws fixed at every 1’0” (304.8mm) intervals. The cost inclusive of
MS Nickel coated 250mm long aldrops 2no’s, MS powder coated 125mm long grip
handle, 2 no’s M.S.P.C. Door stopper. Including cost and conveyance of all
materials at site labour charges etc., complete finished item of work.
Doors Frames (Colour Coated Steel Sections) & Shutter using Cement Bonded
Particle Board as per IS 14276 Providing and fixing of door frame made from cold
roll formed sections made of galvanized (Base steel as per IS277 with zinc of 120
Gms/sqm) colour coated steel sections with total coated thickness of 1mm, primer
coated with epoxy primer coat of 5-7 microns thick, finish paint with polyester paint
of 12-16 microns. The Section for door frame is to be filled with polyurethane (P.U)
form of 40kg/m3. Overall size of frame section should be of 50mm x 50mm. With
necessary corner brackets, stiffeners, hinges, and screws. Cement Bonded particle
834 BMT-N.31
board shutter (Bison Panel or equivalent ) “Single Leaf” with all round styles “U”
1 Sqm 2523
section of size 12m x 18m x 12mm made from 0.6 mm thick galvanized, colour
coated cold rolled steel profiles with 16mm thick Cement Bonded particle Board
(Bison Panel or equivalent ) with necessary screws fixed at every 1’-0” (304.8mm)
intervals. The cost inclusive of MS nickel coated Aldrop of size 250mm long 2nos.
200mm long tower bolt 1no., 125mm handles 2nos., cost and conveyance of all
materials at site and applying one coat primer , one coat of luppum and two coats
of synthetic enamel paint as per approved design for finished item of work
Page # 33
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Supply and fixing of Cement Bonded Particle Board (IS 14276) box type cup board
using Cement Bonded Particle Board for making frame of size 100mm x 35mm
using two sandwiched 16MM boards, one Cement Bonded Particle Board and one
CEMENT BONDED PRE-LAMINATED PARTICLE BOARDS with plain 35mm wood
lipping. The Shutters are made of 16MM thick CEMENT BONDED PRE-
835 BMT-N.32
LAMINATED PARTICLE BOARDS (Pre-Laminated Cement Bonded Particle Board)
1 Sqm 2736
of approved shade inclusive of hardware like M.S. powder coated Piano hinges of
size ¾” x ¾” , Aluminum powder coated handles of size 4” (101.6mm), Aluminum
tower bolt 4” (101.6mm) Godrej locks, screws, wood lipping and Fevicol etc.,
complete finish item of work.
door shutter made out of U sections of size 12x14x12 made from 0.6mm thick pps
sections with 12MM CEMENT BONDED PRE-LAMINATED PARTICLE BOARDS
836 BMT-N.33 with necessary screws fixed at every 1’.0”interwells. The hardware consists of 1 Sqm 1698
250mm long aldrop – 2 Nos.150mm Handle- 1 No , 150 mm long ms powder coated
tower bolt 1 no. nickle coated. The cost is inclusive of all incidentals, labor
transportation charges.
Supply and fixing of V- Board door shutter with alround style “U” lipping size 15 x 18
x 15 mm made from 0.8 mm thick powder coated cold rolled steel profiles with 16
mm thick V-board with necessary screws fixed at 1’-0” interval 250 mm long aldrops
837 BMT-N.34 2 nos. M.S. nickel coated 250 mm long 1 no. M.S. Tower Bolts Including cost and 1 Sqm 1190
conveyance of all materials at site and applying 1 coat of primer, 2 coats of luppum
and 2 coats of synthetic enamel paint as per approved design for finished item of
work.
necessary stiffeners hinges and screws. V- Board shutter with alround style “U”
lipping of size 15 x 18 x 15 mm made from 0.8 mm thick CRCA powder coated steel
838 BMT-N.35
profile with 16 mm thick V-board with necessary screws fixed at every 1’-0” interval
1 Sqm 1403
250 mm long aldrops 2 nos. M.S. nickel coated 250 mm long 1 no. M.S. Tower
Bolts Including cost and conveyance. One coat of primer, 2 coats of luppum and 2
coats of synthetic enamel paint as per approved colour, labour charges etc.,.
Supply and fixing Sintex or equivalent doors are made out of PVC section and
panels. The overall dimension of the same is 33mm X 47mm with usual process
variation and having a wall thickness of 1.5mm with a variation of ± 0.3mm. The
839 BMT-N.36
infill is seamless hallow multi chambered PVC single panel having an effective
Sqm. 1716
dimension of 762mm X 20mm having a wall thickness of 1mm ± 0.3mm complete,
for finished item of work.
Supply and fixing PVC door frames made from extruded sections in overall
840 BMT-N.37 dimensions of 40 X 48mm having a wall thickness of 1.5mm with usual process 1 RM. 194
variation of ± 0.3mm, complete, for finished item of work.
Supply and fixing of V-board wall panelling (water, fire and termite resistant) with
frame work made of GI stud profile of size 48 x 40 x 10 x 0.6 mm thick placed at
every 610 mm C/C intervals fixed vertically in between floor and roof ‘U’ track of
size 50 x 30 x 0.6 mm thick duly fixed with self expansion screws and with 8 mm
841 BMT-N.38
thick V- Board / Cladded around with self tapping self embedding screws fixed at
1 Sqm 731
every 300 mm (centres) leaving a 3 mm gap between two panels of width 2’-0”. The
Gap will be covered with a decorative beading. Surface will be given a smooth finish
over a coat of primer. Inclusive of all taxes: With 8 mm V- Board
Supply and fixing double skin V- Board partition with Frame work made of GI stud
profile of size 48x40x 10x 0.6 mm thick placed at every 610 mm C/C intervals and
915 mm horizontal intervals duly fixed with self expansion screws, the V- Board of 8
mm thick cladded around with self tapping self embedding screws fixed at every
842 BMT-N.39
300 mm (centres) leaving a 3 mm gap between two panels of width 2’-0”(610 mm).
1 Sqm 1105
The Gap will be covered with a decorative moulding surface will be given a smooth
finish over cement primer. The rate Inclusive of cost and conveyance of all
materials and labour charges etc., Complete. DOUBLE SKIN PARTITION
Page # 34
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Supply and fixing of PVC cupboards for kitchen and bedrooms shall be made out of
multi chambered PVC sections having overall dimensions of 20 X 762mm with a
wall thickness of 1.2mm ± 0.3mm. The cabinets shall be made as per the
843 BMT-N.40
requirements of the room with groove system. The PVC section surface shall be
1 Sqm. 3444
plain and laminated finish to have good look, completed, for finished item of work
for SINTEX OR equivalent PVC CABINETS
Supply and fixing of Sintex Frontura door shutter consisting of Sintex make or
equivalent FRP (Fibre Reinforced Plastic) panels on either sides with depressed
panelled design for door having overall wall thickness of 1.5mm + 0.35 mm with
usual process variation. The core of the door shutter shall be filled with
Polyurethane foam (PUF) injected with the help of Hydraulic Injection method,
844 BMT-N.41
wooden black of 35mm x 31mm shall be provided on all four side of the door
1 Sqm. 2653
shutter. Necessary wooden blacks shall be provided to take up necessary hard
wares and fixtures etc. with steel wire mesh at the centre of the door the rate
inclusive of all taxes and finished item work. Max size: 838mm (W) x 2060mm(H)
Colour GOLDEN BROWN. SINTEX FRONTURA DOOR SHUTTER (25MM THICK)
Supply and fixing of sintex door shutter made from specially hotpress moulded SMC
(Sheet moulding compound) sheet polytherencore and PVC Frame section. SMC
sheets shall be made from SMC confirming to IS-`13410 sheets shall have an
average thickness of 1.4mm+/- 0.35mm on both sides. Core of the door shall be
filled with high density polyurethane foam injected with the help of hydraulic
injection method shutter frame to be made of PVC Extruded section of 26mm x
47mm with a wall thickness of 1.4mm+/-0.3mm on both sides corresponding to
845 BMT-N.42 sintex code DWUF 305 the hardware location shall be reinforced with special 1 Sqm. 2891
polymeric reinforcement wooden blocks of suitable size. The corners of the shutter
frame shall be reinforced with polymeric L shaped angle size of 105 x 230mm
corresponding sintex code PR-02 the lock rail shall be made from PVC Extruded
sections having overall dimensions of 26mm x 47mm x 1.4mm +/- 0.3mm on both
sides. The usual process of variation corresponding sintex code of 305 combining
two nos. wooden pieces are inserted on the periphery suitable M.S.Tube
reinforcement shall be provided on the one vertical side of shutter frame
Supply and fixing of Sintex Door shutter made from specially Hot Press Moulded
SMC (Sheet moulding compound) sheets, Polyurethane core and PVC Frame
section SMC sheets shall be made from SMC conforming to IS-13410 sheets shall
have an average thickness of 1.4 mm +/- 0.35 mm on both sides. Core of the door
shutter shall be filled with high density polyurethane foam, injected with the help of
hydraulic injection method shutter frame to be made of PVC extruded section
conforming to IS: 10151: 1982 of size 26 mm x 46 mm with a wall thickness of 1.4
mm +/- 0.3 mm on both sides corresponding to Sintex code DWUF 305. The
846 BMT-N.43 hardware locations shall be reinforced with special polymeric reinforcement wooden 1 Sqm. 2510
blocks of suitable size. The corners of the shutter frame shall be reinforced with
Polymeric ‘L’ shaped angle of size 105mm x 230mm corresponding to Sintex code
PR-02 the lock rail shall be made from PVC extruded sections having overall
dimensions of 26 mm x 46 mm 1.5 mm +/- 0.3 mm on both sides, with usual
process variation corresponding to Sintex code 305 combining two numbers.
Wooden pieces are inserted on the periphery. Suitable MS Tube reinforcement
shall be provided on vertical sides of shutter frame the rate inclusive of all taxes and
finished item work Colour: White & Grey
847 BMT-N.44 SINTEX ENDURA DOOR SHUTTER (26MM THICK) 1 Sqm. 1335
Supply and fixing of door shutters made of rigid PVC extruded hollow section(Nandi
or equivalent ) of 20mm X 200 mm with the wall thickness of 1.0mm +/- 0.1mm
equally divided into 4 no's with tongue and groove locking arrangements. The
shutter frame is made of 30mm X 79mm with the wall thickness of 1.5mm +/-
848 BMT-N.45 0.15mm section mitre-cut and joined at 4 corners with 125mm X 225mm plastic Sqm. 1526
brackets. The shutter shall be horizontally reinforced with 2 no's of 8mm PVC rods.
Teak wood batons shall be reinforced inside the door shutter during the fabrication
of the door shutter at those points wherever the hardware is fixed onto the door
shutter.
Page # 35
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Supply and fixing of door frame made of hollow extruded PVC section having
dimensions of 40 X 57mm with the wall thickness of 2mm +/- 0.2mm duly reinforced
849 BMT-N.46
with seasoned wood plank at the hinges side. The door frame top 2 corners shall be
1 RM 183
metri-cut/ welded. PVC DOOR FRAME
Supply and fixing of door frame made of hollow extruded PVC section having
dimensions of 40 X 46 mm with the wall thickness of 2mm +/- 0.2mm duly
850 BMT-N.47
reinforced with seasoned wood plank at the hinges side. The door frame top 2
1 RM 159
corners shall be mitre cut/welded
Supply & fixing of Fly mesh shutters of size 20 x 40 mm fly proof mesh with std. Spn
(S.S.) fly mesh including cost and conveyance of all materials, and labour charges
851 BMT-N.48
etc. complete for finished item of work.: Single shutter 2'-0" x 4'-0"
1 Sqm 879
(609.6x1219.2mm) shutter section size 20 x 40 mm
852 BMT-N.49
etc. complete for finished item of work.: Double shutter 3'-0" x 4'-0" (914.4 x
1 Sqm 879
1219.2mm) shutter section size 20 x 40 mm
853 BMT-N.50
etc. complete for finished item of work.: Double shutter 4'-0" x 4'-0" (1219.2 x
1 Sqm 879
Supply & fixing of Fly mesh shutters of size 20 x 40 mm fly proof mesh with Netlon
fly mesh including cost and conveyance of all materials, and labour charges etc.
854 BMT-N.51
complete for finished item of work.: Single shutter 2'-0" x 4'-0" (609.6x1219.2mm)
1 Sqm 749
shutter section size 20 x 40 mm
855 BMT-N.52
complete for finished item of work.: Double shutter 3'-0" x 4'-0" (914.4 x 1219.2mm)
1 Sqm 749
shutter section size 20 x 40 mm
856 BMT-N.53
complete for finished item of work.: Double shutter 4'-0" x 4'-0" (1219.2 x
1 Sqm 749
Supply & fixing of Door frames made of all formed sections of 1.25mm thick CRCA
section, size should be 50x60mm with 32mm rebate. The corner of the frame
should be welded. The frame should be painted with one coat of primer and
857 BMT-N.54
finished painted with pure polyester paint. The frame should be provided with
1RM 173
approved quality butt hinges of 3 Nos. complete for finished item.: Single shutter 3'-
0" x 7'-0" (914.4x2133.6mm) outer frame section size of 50 x 60 mm
Supply & fixing of Door frames made of all formed sections of 1.25mm thick CRCA
section, size should be 50x60mm with 32mm rebate. The corner of the frame
should be welded. The frame should be painted with one coat of primer and
858 BMT-N.55
1 RM 173
approved quality butt hinges of 3 Nos. complete for finished item.: Double shutter 5'-
0" x 7'-0" (1524 x 2133.6mm) outer frame section size of 50 x 60 mm
Supplying & fixing of Door frame made of roll formed section of 1.25 mm thick
CRCA section, size should be 50 x 60 mm with 32 mm rebate. The corner of the
frame should be welded. The frame should be painted with one coat of primer and
859 BMT-N.56
1 RM 197
approved quality butt hinges of 3 Nos. Complete for finished item of work.: Single
shutter 3'-0" x 7'-0" (914.4x2133.6mm) outer frame section size of 50 x 75 mm
Supplying & fixing of Door frame made of roll formed section of 1.25 mm thick
CRCA section, size should be 50 x 60 mm with 32 mm rebate. The corner of the
frame should be welded. The frame should be painted with one coat of primer and
860 BMT-N.57
1 RM 197
approved quality butt hinges of 3 Nos. Complete for finished item of work.: Single
shutter 5'-0" x 7'-0" (1524x2133.6mm) outer frame section size of 50 x 75 mm
Page # 36
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Providing and fixing door frames fabricated from sections made of galvanized steel
powder coated (base steel as per IS 513, galvanised as per IS 277 with zinc of 120
grams / square metre), the factory made section are powder coated with pure
polyester powder of 50-60 microns thick with total coated thickness of 1.25 mm, size
of door frame section is of 105 x 60 mm with a rebate of 38 mm to accommodate 35
mm thick door shutter, with groove to insert gasket in the frame section, frame
861 BMT-N.58
section filled with polyurethane foam, cut to length, and joined by way of welding,
1 RM 558
each frame provided with: a) 2mm thick MS powder coated butt hinges of 100 mm
long – 3 Nos. for single shutter, 6 Nos. for double shutter. b) CRCA electroplates
stiffeners of 6 Nos. – 3 in each vertical. c) 40 mm x 200 mm x 1.2 mm hold fasts
screwed to stiffeners – 6 Nos. with split end tail. d) Nylon Aldrop Receiver – 1 No.
for single shutter frame. e)Tie Rod – 1 No
Providing and fixing of door frames factory made, internal door frames without
threshold, fabricated from pre painted cold roll formed section 100 mm x 60 mm
made of galvanized (base steel as per IS-513 ‘D’ quality galvanized as per IS-277
with Zinc of 120 Gms/sqm) steel colour coated sections with total coated thickness
of 1 mm primer coated with epoxy primer of 5-7 microns thick finish painted with
polyester paint of 12-16 microns and back coated with alkyd backer of 5-7 microns,
the frame section filled with polyurethane (PU Foam) of 40 kg/Cu.m and the
862 BMT-N.59 sections cut to length and mitre joined by means of 1.25 mm thick CRCA 1 RM 377
electroplated corner brackets of size 75 x 75 mm and 1.25 mm thick electroplated
stiffeners of size 150 mm for fixing hold fasts and hinges with MS Powder coated
fittings a) 6 Nos M.S. Z Type hold fasts made of 30 mm x 3 mm MS flat of 230 mm
long, 3 Nos each size expandable PVC covered screw type fasteners b) 2.5 mm x
300 mm long ‘T’ hinges /2.5 mm x 50 mm x 50 mm x 100 mm two way but hinges (3
Nos for single leaf or 2 Nos for Double leaf/leaf) c) 12 mm dia MS tie rod at bottom
with necessary size of nuts on either side.
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding doors three
track - only two glass shutters sliding - 95 -Series duly manufactured using UPVC
reinforced profiles of 95.50 mm x 60 mm x 2.25 mm for outer frames, 66 mm x 42
mm x 2.25 mm for sliding door shutter frames capable of mounting single glazing
system, structurally reinforced with hot dip galvanized up to 50 microns of minimum
thickness of 1.2 mm prefabricated & welded through fusion welding the window
863 BMT-N.60 sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with 1 sqm 5077
EPDM weathering seal resistant accessories like clipping locking system made of
aluminium 1 No., per set of sashes and the system is to be installed at the site using
anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc.,
including cost and conveyance of all materials, accessories, labour charges for
transportation, erection at site with templates for casement sizing complete for
finished item of work
track - two glass shutters sliding and one mesh shutter sliding- 95 -Series duly
manufactured using UPVC reinforced profiles of (108 mm x 45 mm)/(95.50 mm x 60
mm) x 2.0 mm for outer frames, (75 mm x 39 mm)/(66 mm x 42 mm) x 2.0 mm for
sliding door shutter frames capable of mounting single glazing system, structurally
reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm
prefabricated & welded through fusion welding the window sash shall be fitted with
5 mm thick clear float glass of reputed make and mesh shutter shall be made of
864 BMT-N.61
(48.5 mm x 30 mm))/(50 mm x 26.5 mm) x 2.0 mm uPVC profile section and fitted
1 sqm 5610
with nylon/polymer mesh and rollers/pulley duly fixed with TPV Gaskets/ EPDM
weathering seal resistant accessories like clipping locking system made of
Page # 37
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
track - three glass shutters sliding - 112 -Series duly manufactured using UPVC
reinforced profiles of 112.0 mm x 60 mm x 2.25 mm for outer frames, 66 mm x 42
mm x 2.25 mm for sliding door shutter frames capable of mounting single glazing
system, structurally reinforced with hot dip galvanized up to 50 microns of minimum
865 BMT-N.62 sash shall be fitted with 5 mm thick clear float glass of reputed make and fixed with 1 sqm 5344
EPDM weathering seal resistant accessories like clipping locking system made of
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) openable doors
with openable shutters duly manufactured using UPVC reinforced profiles of 60 mm
x 55 mm x 2.0 mm for outer frames, 70 mm x 60 mm x 2.25 mm for mullion sections
as per the need and 102 mm x 60 mm x 2.0 mm for openable shutter frame capable
of mounting single glazing system structurally reinforced with hot dip galvanized up
to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through
fusion welding the window sash shall be fitted with 5 mm thick clear float glass of
866 BMT-N.63 reputed make duly fixed with TPV Gaskets/ EPDM weathering seal resistant and 1 Sqm 6358
accessories for openable door - hinges of stainless steel grade 304- 3 Nos., per
shutter handle with mazak alloy casting 1 No. per shutter, locking system suitably
concealed 1 No., with raiser wedges for smooth operation and the system is to be
installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/
deglazing at site etc., including cost and conveyance of all materials, accessories,
labour charges for transportation, erection at site with templates for casement sizing
complete for finished item of work
Supplying and fixing door shutter, with shutter frame and infill panel made from PVC
material conforming to IS: 10151-1982, the shutter frame made out of PVC
extruded sections having overall dimension of 47 mm x 33 mm with wall thickness
of 1.2mm + 0.3mm with usual process variation, the shutter frame with tapered
shape to provide better grip to the infill panel end to drain out the water The Infill
panel is made out of PVC Sections having Overall Dimensions of 200 mm x 20 mm
867 BMT-N.64
with wall thickness of 1mm + 0.2mm, the shutter frames mitre cut and joined at the
1 Sqm 824
corner, by providing Polymeric “ L” type corners to take hardware & fixtures fixed
with 10-20mm counter sunk fully threaded parallel shank steel screws, all the
hardware locations reinforced with special polymeric bars as per drawings, stickers
showing locations of different hardware pasted on the shutter, the infill panels
joined by tongue and groove method.
PVC Door shutter conforming to IS: 10151-1982, the infill panel made of seamless
one piece multi chamber PVC extruded sections having overall dimensions of 610
mm x 20 mm with wall thickness of 1mm + 0.2mm with the top and bottom edges of
868 BMT-N.65 the shutter covered with end cap of the size 20 mm x 11 mm with the door shutter to 1 Sqm 980
be reinforced with special polymeric reinforcements as per drawing for hardware’s
and fixtures. Stickers indicating the locations of hardware will be pasted at
appropriate places.
Providing & Fixing of Scientific Doors with metal door frames and door shutters
made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality,
galvanized as per IS 277 with Zinc of 120 GSM)coated with Zinc Phosphate Primer
to receive any paint on site or finished with Thermosetting Polyurethane paint of
Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy
polyester powder for powder coating paint thickness 50-60 microns (Dry film
thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of
869 BMT-N.66
0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully
1 Sqm 7559
flush, double skin door shell seam joints at stile edges, in-fill of honeycomb kraft
paper used to give the required rigidity and effective acoustic insulation with 6”
Tower bolt – 1 No., 6” D handles – 2 Nos., 10” Aldrop – 1 No., Butt Hinges – 3 Nos,
Mortise Lock of approved quality – 1 No, frames fixed to the concrete/masonry wall
by means of self expanding screws complete for finished item of work for Single leaf
Door
Page # 38
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Providing & Fixing of Scientific Doors with metal door frames and door shutters
made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality,
galvanized as per IS 277 with Zinc of 120 GSM). coated with Zinc Phosphate
Primer to receive any paint on site or finished with Thermosetting Polyurethane
paint of Aliphatic Grade providing high levels of scratch resistance and
durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns
(Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter
870 BMT-N.67
section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm
1 Sqm 8063
thick fully flush, double skin door shell seam joints at stile edges, in-fill of
honeycomb kraft paper used to give the required rigidity and effective acoustic
insulation with 6” Tower bolt – 2 Nos., 6” D handles – 2 Nos., 10” Aldrop – 1 No.,
Butt Hinges – 6 Nos, Mortise Lock of approved quality – 1 No, frames fixed to the
concrete/masonry wall by means of self expanding screws complete for finished
item of work for Double leaf Door
Moulded panel solid core flush doors using water-resistant hardwood fibre HDF /
871 BMT-N.68
MDF fibre boards skins of 2.5 mm thick doors - 30 mm thick
1 Sqm 1536
Moulded panel solid core flush doors using water-resistant hardwood fibre HDF /
872 BMT-N.69
MDF fibre boards skins of 2.5 mm thick doors - 35 mm thick
1 Sqm 1679
Solid core membrane flush doors using rigid PVC membrane of 0.3 mm thick of
873 BMT-N.70
different elegant shades doors - 30 mm thick
1 Sqm 1247
Solid core membrane flush doors using rigid PVC membrane of 0.3 mm thick of
874 BMT-N.71
different elegant shades doors - 35 mm thick
1 Sqm 1381
Providing & fixing 30 mm thick solid panel PVC door shutter consisting of frame
made out of 19 guage M.S tube of 19 x 19 mm for stiles, top & bottom rail, with a
coat of primer of approved make. M.S. Frame covered with 5 mm thick heat
moulded PVC “C” channel of size of 30 x 50 mm forming stiles, 5 mm thick 75 mm
wide PVC sheet for top, lock & bottom rail on either side 20 mm wide cross PVC
875 BMT-N.72
sheet as gap insert for top & bottom rail, panelling of 10mm(+/-)( 5mm+5mm)” thick
1 Sqm 2406
PVC sheet fitted in the M.S. frame welded /sealed to the stiles, on either side joined
together with solvent cement adhesive etc., additional 5 mm thick PVC strip of 20
mm width stuck on the interior side of the C channel using solvent cement,
complete as per direction of Engineer–in–charge, manufacturers specification.
Supply & Fixing SOLID STEEL DOOR door shutter made out of G I Precoated
Sheet with an average wall thickness of 0.35 mm on both sides. MS Tube having
dimensions of 19 x 19 mm is inserted along the hinge side of the door, core of the
door shutter filled with High Density Polyurethane foam injected with the help of
876 BMT-N.73
hydraulic injection method, four sides of the door covered with G I Precoated Sheet
1 Sqm 1175
and the hardware locations reinforced with suitable wooden blocks as per drawing
and stickers indicating location of the hardware pasted at appropriate places, etc
complete
Supplying & fixing SINGLE PANEL 30 mm thick PVC DOOR, door shutters with
shutter frame and Infill panel made from PVC material, the shutter frame made out
of PVC extruded sections having overall dimensions of 6 0mm x 30 mm with wall
thickness of 1.3 mm ± 0.3 mm, with the Infill panel made out of multi chambered
877 BMT-N.74 seamless hollow PVC extruded panel having overall dimensions of 610 mm x 20 1 Sqm 2067
mm having wall thickness 1 mm ± 0.2 mm with the shutter frame meter cut and
joined at corners and all the hardware locations reinforced with special polymeric
bars as per drawing including providing special PVC braket on hinge side, etc
complete
878 BMT-N.75 deleted Deleted
Providing & fixing internal prelaminated PVC door frame of size 100 x 45 mm with a
wall thickness of 5mm, made of extruded 5 mm Prelam PVC foam sheet, mitred cut
at two corners and joined with two nos. of 150mm long brackets of 15 x 15 mm MS
square tube, two vertical door profiles reinforced with 40 x 20 MS Tube of 19 guage
879 BMT-N.76
throughout the frame and the door frame fixed to the wall using 65/100mm long MS
1 RM 477
screws through the frame by using PVC fasteners with a minimum of 3 nos of
screws provided for each vertical member and two nos. for horizontal, etc complete
as per drawing and direction of Engineer in Charge
Page # 39
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Supply & Fixing of Powder Coated Mild Steel doors, frames & shutters made of
Skin pass galvanized Iron sheet conforming to Base Steel as per IS 513 “D” Quality,
Galvanized as per IS 277 with Hot Zinc Coating of 120 grams / Sq.Mtr with powder
coating of thickness 60-65 Microns, frame with 1.2mm thick Skin pass Galvanized
Iron sheet formed to single rebate profile of ize 100 mm X 58 mm and filled with in-
fill Polyurethane foam, the Door Shutters are with 0.80 mm thick Skin pass
Galvanized Iron Sheet formed to provide a 46 mm thick fully flush, double skin door
shell with Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft
880 BMT-N.77 Paper and coated with polyester powders of Pure polyester/ epoxy polyester or 1 Sqm 8844
polyurethane powder for powder coating of thickness 60 – 65 microns and are
coated with Zinc Phosphate Primer to receive any paint on site or finished with
Thermosetting Polyurethane paint of Aliphatic Grade providing high levels of
scratch resistance and durability, the Shutter provided with 6 MM clear float vision
glass in Circular, Square or Rectangular shapes, Stainless Steel Ball Bearing Butt
Hinges 3 mm thick fixed flush to the frame and shutter (Profile 102x76x3mm
thick).Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc for industrial,
commercial, residential, cleanroom applications
Supply & Fixing of Stainless steel doors, frames & shutters made of stainless steel
grade 304 of hairline finish, frame with 1.2mm thick formed to single rebate profile
of ize 100 mm X 58 mm and filled with in-fill Polyurethane foam, the Door Shutters
are with 0.80 mm thick Stainless steel Sheet formed to provide a 46 mm thick fully
flush, double skin door shell with Lock Seam joints at stile edges, fitted with in-fill of
881 BMT-N.78
Honeycomb Kraft Paper, the Shutter provided with 6 MM clear float vision glass in
1 Sqm 16582
Circular, Square or Rectangular shapes, Stainless Steel Ball Bearing Butt Hinges 3
mm thick fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise
Sash Lock with Lever Handles, Mortise Dead Bolt, etc for industrial, commercial,
residential, cleanroom applications
Supply & Fixing of Powder Coated Fire Rated doors, frames & shutters made of
Iron sheet formed to double rebate profile of ize 143 mm X 58 mm with maximum
bending radius of 1.4 mm and filled with in-fill Polyurethane foam, the Door Shutters
are with 0.80 mm thick Skin pass Galvanized Iron Sheet formed to provide a 46 mm
thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted
882 BMT-N.79 with in-fill of Honeycomb Kraft Paper and coated with polyester powders of Pure 1 Sqm 10502
polyester/ epoxy polyester or polyurethane powder for powder coating of thickness
60 – 65 microns and are coated with Zinc Phosphate Primer to receive any paint on
site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing
high levels of scratch resistance and durability, the Shutter provided with 6 MM
clear float vision glass in Circular, Square or Rectangular shapes, Stainless Steel
Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile
102x76x3mm thick).Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc
for 120 minutes Fire Rated door conforming to IS:3614 (Part2) 1992
Page # 40
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Supply & Fixing of Powder Coated Fire Rated doors, frames & shutters made of
Iron sheet formed to double rebate profile of ize 143 mm X 58 mm with maximum
bending radius of 1.4 mm and filled with in-fill Polyurethane foam, the Door Shutters
are with 0.80 mm thick Skin pass Galvanized Iron Sheet formed to provide a 46 mm
thick fully flush, double skin door shell with Lock Seam joints at stile edges, fitted
883 BMT-N.80 with in-fill of Honeycomb Kraft Paper and coated with polyester powders of Pure 1 Sqm 9949
polyester/ epoxy polyester or polyurethane powder for powder coating of thickness
60 – 65 microns and are coated with Zinc Phosphate Primer to receive any paint on
site or finished with Thermosetting Polyurethane paint of Aliphatic Grade providing
high levels of scratch resistance and durability, the Shutter provided with 6 MM
clear float vision glass in Circular, Square or Rectangular shapes, Stainless Steel
Ball Bearing Butt Hinges 3 mm thick fixed flush to the frame and shutter (Profile
102x76x3mm thick).Mortise Sash Lock with Lever Handles, Mortise Dead Bolt, etc
for 60 minutes Fire Rated door conforming to IS:3614 (Part2) 1992
Supply & Fixing of Stainless steel Fire Rated doors, frames & shutters made of
Stainless steel of 304 grade hairline finish, frame with 1.2mm thick Stainless steel of
304 grade hairline finish sheet formed to double rebate profile of ize 143 mm X 58
mm with maximum bending radius of 1.4 mm and filled with in-fill Polyurethane
foam, the Door Shutters are with 0.80 mm thick Stainless steel of 304 grade hairline
finish Sheet formed to provide a 46 mm thick fully flush, double skin door shell with
Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and
coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane
884 BMT-N.81
powder for powder coating of thickness 60 – 65 microns and are coated with Zinc
1 Sqm 16582
Phosphate Primer to receive any paint on site or finished with Thermosetting
Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance
and durability, the Shutter provided with 6 MM clear float vision glass in Circular,
Square or Rectangular shapes, Stainless Steel Ball Bearing Butt Hinges 3 mm thick
fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock
with Lever Handles, Mortise Dead Bolt, etc for 120 minutes Fire Rated door
conforming to IS:3614 (Part2) 1992
Supply & Fixing of Stainless steel Fire Rated doors, frames & shutters made of
Stainless steel of 304 grade hairline finish, frame with 1.2mm thick Stainless steel of
304 grade hairline finish sheet formed to double rebate profile of ize 143 mm X 58
mm with maximum bending radius of 1.4 mm and filled with in-fill Polyurethane
foam, the Door Shutters are with 0.80 mm thick Stainless steel of 304 grade hairline
finish Sheet formed to provide a 46 mm thick fully flush, double skin door shell with
Lock Seam joints at stile edges, fitted with in-fill of Honeycomb Kraft Paper and
885 BMT-N.82
coated with polyester powders of Pure polyester/ epoxy polyester or polyurethane
1 Sqm
14456
powder for powder coating of thickness 60 – 65 microns and are coated with Zinc
Phosphate Primer to receive any paint on site or finished with Thermosetting
and durability, the Shutter provided with 6 MM clear float vision glass in Circular,
Square or Rectangular shapes, Stainless Steel Ball Bearing Butt Hinges 3 mm thick
fixed flush to the frame and shutter (Profile 102x76x3mm thick).Mortise Sash Lock
with Lever Handles, Mortise Dead Bolt, etc for 60
minutes Fire Rated door conforming to IS:3614 (Part2) 1992
Page # 41
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Supply & Fixing of Lead Lined Clean room doors frames and shutters made of Skin
pass galvanized Iron sheet (Conform to Base Steel as per IS 513 “D” Quality,
Galvanized as per IS 277 with Hot Zinc Coating of 120 grams / Sq.Mtr).with powder
coating of thickness 60-65 Microns, frame of 1.60mm thick galvanized steel sheet
(Conform to IS 277) formed to Single/double rebate profile of size 100mm X 58mm/
143x58mm, door frames with a single / multi Layer of Lead sheet varying thickness
from 3mm /1mm to 2mm depends on radiation level, the shutter with 1.2 mm thick
Galvanized Steel Sheet (Conform to IS 277) formed to provide a 46mm thick fully
flush, double skin door shell with Lock Seam joints at stile edges with a single /
886 BMT-N.83
multi Layer of Lead sheet varying thickness from 3mm /1mm to 2mm depends on
1 Sqm #REF!
radiation level, the lead sheets extend the full width and height of the door, Lead
thickness is equal to the shielding in the adjacent wall, the door frames and door
shutters are coated with polyester powders of Pure polyester/ epoxy polyester or
polyurethane powder for powder coating of thickness 60 – 65 microns, coated with
Zinc Phosphate Primer to receive any paint on site or finished with Thermosetting
and durability, hardware with Stainless Steel Ball Bearing Butt Hinges 3 mm thick
fixed flush to the frame and shutter etc complete for finished item
Supply & Fixing of Lead Lined Stainless steel Clean room door frames and shutters
made of Stainless steel grade of 304 hairline finish, frame with 1.60mm (16SWG)
thick hairline finish Stainless steel grade of 304 formed to Single/double rebate
profile of size 100 mm x 58mm/ 143 x 58 mm, door frames with a single / multi
Layer of Lead sheet varying thickness from 3mm /1mm to 2mm depends on
radiation level, the shutter with 1.2 mm thick hairline finish Stainless steel grade of
887 BMT-N.84 304 formed to provide a 46mm thick fully flush, double skin door shell with Lock 1 Sqm 18793
Seam joints at stile edges with a single / multi Layer of Lead sheet varying thickness
from 3mm /1mm to 2mm depends on radiation level. The lead sheets extend the
full width and height of the door. Lead thickness is to be equal to the shielding in the
adjacent wall. Hardware can be provided with Stainless Steel Ball Bearing Butt
Hinges 3 mm thick fixed flush to the frame and shutter etc complete for fisnihed
item of work
Supply and fixing of V- BOARD (conforming toIS 14862) door shutter with all-round
style “U” lipping size 15 x 18 x 15 mm made from 0.8 mm thick powder coated cold
rolled steel profiles with 16 mm thick V-BOARDwith necessary screws fixed at 1’-0”
888 BMT-N.85 interval 250 mm long aldrops 2 nos. M.S. nickel coated 250 mm long 1 no. M.S. 1 Sqm 1190
Tower Bolts Including cost and conveyance of all materials at site and applying 1
coat of primer, 2 coats of luppum and 2 coats of synthetic enamel paint as per
approved design for finished item of work.
Supply and fixing of BOARD (conforming toIS 14862) 12 mm thick door shutter of
size 6’0” x 2’6” withall-round style “U” lipping size 15 x 14 x 15 mm made from 0.8
mm thick powder coated cold rolled steel profiles with necessary screws fixed at 1’-
889 BMT-N.86 0” interval 250 mm long aldrops 2 nos. M.S. nickel coated 250 mm long 1 no. M.S. 1 Sqm 1020
Tower Bolts Including cost and conveyance of all materials at site and applying 1
coat of primer, 2 coats of luppum and 2 coats of synthetic enamel paint as per
approved design for finished item of work.
necessary stiffeners hinges and screws. BOARD (IS 14862) shutter with all-round
style “U” lipping of size 15 x 18 x 15 mm made from 0.8 mm thick CRCA powder
890 BMT-N.87 coated steel profile with 16 mm thick V-board with necessary screws fixed at every 1 Sqm 1403
1’-0” interval 250 mm long aldrops 2 nos. M.S. nickel coated 250 mm long 1 no.
M.S. Tower Bolts Including cost and conveyance. One coat of primer, 2 coats of
luppum and 2 coats of synthetic enamel paint as per approved colour, labour
charges etc.
Page # 42
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Providing, supplying & fixing of glazed 2 Track -2 Panel Sliding Door made out of
multi chambered uPVC sections with TPV gaskets having isolated drainage and
reinforced with Galvanized Iron profiles throughout the window. The sliding outer
frame having a overall size of 60 x 45 mm with reinforcement of 1 mm thickness,
891 BMT-N.88 super sash with overall size of 39 x 75 mm with reinforcement of 1.5 mm thickness. 1 Sqm 4513
Glazing bead for fixing of glass shall be of size 20 x 18mm and coextruded with
gasket. Fiber Glass mesh shall be provided in mesh shutter. Window/Door shall be
provided with 6 mm plain float glass, standard hardware & multi point locking
system of Patio espagnolette. Wall thickness of frame & sash shall be 2.0 mm
WINDOWS
P. (Landing cost - including material VAT, loading, cost of conveyance,
Supplying and fixing of WINDOWS with Prelaminated Cement Bonded Particle

boards and Pre-Painted Steel Sections fabricated from pre-painted Cold rolled
formed sections made of galvanized steel color coated sections (Base steel as per
IS-512 D quality, galvanized as per IS-277 with Zinc of 120 gram/sqm) with total
coated thickness of 0.58mm primer coated with epoxy primer of 5-7 microns thick,
finish painted with polyester paint of 12-16 microns and back coated with alkyd
backer of 5-7 microns), sections for outer frame and centre mullion (duly filled with
PU form of 40 kg/Cum) of 60mm x 50mm, with provision for fixing glazed shutter
and the section for glazed/paneled of size 48 mm x 25 mm and another section of
size 60 mm x 23 mm provided for separating glazed and paneled portion, the
section cut to length and miter jointed with plastic corner brackets and with corner
902
brackets for window outer frames of 50mm x 60mm, the mullion section fixed to the
frame with plastic mullion cap and stiffener plates of size 60 mm x 50 mm made of
1.25mm thick CRCA electroplated provided to fix window frames to
concrete/masonry, gasket for fixing glass and 10mm both sides pre-laminated
cement bonded particle board and 5 mm thick colour pin headed glass provided for
glazing and providing guard bars of 10 mm square rods duly welded at 150 mm
pitch to MS flat section of size 18 mm and 3 mm thick, and fixed to wall by means of
self expansion nylon Cap (75) and electroplated wooden screws of size 100 mm,
together with aluminum powder coated fittings, A) 75mm long grip handles 1 no per
shutter, B) 75 mm long tower bolts 2 nos. per shutter, C) Heavy duty SS Pivot
hinges 2 nos per shutter, D) MS Powder coated telescopic stay 1 no per shutter.
Pre Laminated Cement Bonded Particle Board WINDOWS – Single shutter

903 BMT-P.01 2’0”x4’0” outer frame section size of 50mm x 60mm shutter frame section size of 1 Sqm 3748
48mm x 25mm
Pre Laminated Cement Bonded Particle Board WINDOWS –Double shutter 3’0” x
904 BMT-P.02 4’0” outer frame section size of 50mm x 60mm shutter frame section size of 48mm x 1 Sqm 3786
25mm mullion section size of 50mm x 60mm for outer frame
Pre Laminated Cement Bonded Particle Board WINDOWS – Double shutter 3’0” x
905 BMT-P.03 3’0” outer frame section size of 50mm x 60mm shutter frame section size of 48mm x 1 Sqm 4133
25mm Mullion section size of 50mm x 60mm for outer frame.
Pre Laminated Cement Bonded Particle Board WINDOWS – Double shutter
906 BMT-P.04 4’0”x4’0” outer frame section size of 50mm x 60mm shutter frame section size of 1 Sqm 3748
48mm x 25mm Mullion section size of 50mm x 60mm for outer frame.
Pre Laminated Cement Bonded Particle Board WINDOWS – Center fixed both side
openable shutters 6’0”x4’0” outer frame section size 50 mm x 60 mm shutter frame
907 BMT-P.05
section size of 48mm x 25mm, Mullion section size of 50mm x 60mm fixed beading
1 Sqm 3366
section size of 12mm x 12mm.
Supply and fixing of openable window made out of extruded PVC section and the
outer frame having overall dimensions of 40 x 48 mm with a wall thickness of 1.5
908 BMT-P.06 mm and the shutter frame with overall dimensions of 26 x 47 mm and wall thickness 1 Sqm. 2632
of 1.2mm ± 0.3mm provided with 5mm glazing, the centre mullion having over all
dimensions of 25 x 32.5mm ±0.3mm, complete, for finished item of work.
Supply and fixing of two track or three track sliding window with the outer frame of
58 x 45mm with a wall thickness of 1.2mm ± 0.3mm and the sliding shutter frame
909 BMT-P.07 made of PVC section 57 x 32mm with overall dimensions of 1.5mm ± 0.3mm 1 Sqm. 2344
provided with 5mm glazing including roller bearings and arrestor type handle cum
lock complete, for finished item of work.
Page # 43
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Supply and fixing of pre-painted steel windows & top hung and fixed louvered
ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick
'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with
epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16
microns thick and back coated with 5-7 microns thick alkyd backer, section for outer
frame of 46 x 52 mm section and for shutter of 46 x 46 mm section for mullion 46 x
70 mm, and section for beading should be 18 x 25 mm and section for louvered
910 ventilation of 33 x 56 mm Box section and the windows panelled with 5 mm thick
plain float glass & 4 mm pinhead glass for ventilators with Ethyl propylene Diamine
monomer Gasket (EPDM) and the sections cut to length mitre joined with corner
brocket centre mullions fixed using mullion cap and with handle made of high grade
aluminium powder coated and nylon receiver, corner brackets made of CRCA with
Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the
concrete /masonry wall by means of self expanding screws including 10 mm square
guard bars with 6" pitch complete for finished item of work.
Windows: Single shutter 2'0 x 4'0 (609.6 x 1219.2 mm ) Outer frame section size of
911 BMT-P.08
46 x 52 mm shutter frame section size of 46 x 46 mm
1 sqm 4643
Windows: Double shutter 3'-0" x 4'-0" (914.4mm x 1219.2 mm) outer frame section
912 BMT-P.09
size of 46 x 52 mm shutter frame section size of 46 x 46 mm
1 Sqm 4643
Windows: Double shutter 3'-0" x 4'-0" (914.4mm x 1219.2 mm) outer frame section
913 BMT-P.10 size of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 1 Sqm 4911
46 x 70 mm
Windows: Double shutter 4'-0" x 4 '-0" (1219.2x12.19.2mm) outer frame section size
914 BMT-P.11
of 46 x 52 mm shutter frame section size of 46 x 46 mm
1 Sqm 4777
Windows: Double shutter 4'-0" x 4 '-0" (1219.2x1219.2mm) outer frame section size
915 BMT-P.12 of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 1 Sqm 4911
70 mm
Windows: Double shutter 4'-6" x 4 '-6" (1371.6x1371.6mm) outer frame section size
916 BMT-P.13 of 46 x 52 mm shutter frame section size of 46 x 46 mm Mullion section size of 46 x 1 Sqm 4375
70 mm
Windows: Centre fixed both side openable shutter 5'-0" x 4'-0" (1524x1219.2mm)
917 BMT-P.14 outer frame section size of 46 x 52 mm shutter frame section size of 46 x 46 mm 1 Sqm 4375
Mullion section size of 46 x 70 mm fixed beading section size of 18 x 25 mm
Windows: Centre fixed both side openable shutter 6'-0" x 4'-0" (1828.8x1219.2mm)
Windows: Centre fixed both side openable shutter 6'-0" x 4'-6" (1828.8x1371.6mm)
Ventilators: Top Hung 2 '-0" x 2'-0" (609.6x609.6mm) outer frame section size of
920 BMT-P.17
46mm x 52 mm shutter frame section size of 46mm x 46 mm
1 Sqm 5089
921 BMT-P.18 46 x 52 m shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 1 Sqm 5089
mm
922 BMT-P.19 46 x 52m m shutter frame section size of 46 x 46 mm Mullion section size of 46 x 70 1 Sqm 5089
mm
Ventilators: Fixed louvers 2'-0" x 2'-0" (609.6x609.6mm)(Box section) outer frame
923 BMT-P.20
section size of 33 x 56 mm
1 Sqm 3482
Ventilators: Fixed louvers 4'-0" x 2'-0" (1219.2 x 609.6 mm) (Box section) outer
924 BMT-P.21
frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm
1 Sqm 3482
Ventilators: Fixed louvers 4'-0" x 3'-0" (1219.2 x 914.4 mm) (Box section) outer
925 BMT-P.22
frame section size of 33 x 56 mm Mullion section size of 33 x 56 mm
1 Sqm 3482
Page # 44
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Providing and fixing of Openable Windows made of pre-painted steel (Base steel as
per IS 513 of 0.58 mm thick galvanized as per IS 277 with Zinc of 120 GSM), primer
coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint
of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and
section for outer frame of 48 x 50 mm, centre mullion of 48 x 50 mm, section for
shutter of 48 x 25 mm and the fixed glass beading section should be 12 x 12 mm
926 and the outer frame and mullions to have rebate for glazed shutter with a 20 mm
provision for guard bars/grills and the sections cut to length metre joined with corner
bracket, centre mullion fixed with mullion cap, handle, stay, 2 nos. of stainless steel
heavy duty pivot hinges provided per shutter and windows fitted with 5 mm thick
plain float glass with rubber gaskets including fixing the frames in concrete/masonry
wall by means of self expanding screws, Including 10mm Square guard bars with
6” (152.4mm) pitch etc., complete for finished item of work.
Single shutter Window 2’0”x4’0” (609.6mm x 1219.2mm). Outer frame section size
927 BMT-P.23
of 48x50mm shutter frame section size of 48 x 25 mm.
1 Sqm 4241
Double shutter Window with vertical mullion 3’0” x 4’0” ( 914.4mm x 1219.2mm)
928 BMT-P.24 outer frame section size of 48x50mm shutter frame section size of 48 x 25 mm. 1 Sqm 4509
Mullion section size of 48x50mm.
Double shutter Window with vertical member4’0” x 4’0” (1219.2mm x 1219.2mm)
929 BMT-P.25 outer frame section size of 48x50mm shutter frame section size of 48 x 25 mm and 1 Sqm 4509
mullion section should be of 48x50mm.
Centre fixed both side openable shutter window 5’0”x4’0” (1524mm x1219.2mm).
930 BMT-P.26 Outer frame section size of 48x50mm. Shutter frame section size of 48 x 25 mm. 1 Sqm 3974
Mullion section size of 48x50mm. Fixed beading section size of 12x12mm.
Centre fixed both side openable shutter window 6’0”x4’0” (1828.8mm x1219.2mm).
Mullion section size of 48x50mm. Fixed beading section size of 12 x 12mm.
Providing & Fixing of Openable Windows with Fly-mesh made of pre-painted steel
(Base Steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 with zinc of
150 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with
a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick
alkyd backer and the section for outer frame of 72 x 55mm, centre mullion of 72 x
50mm, section for fixed glass beading section of 12 x 12 mm and section for
shutters of 48 x 25 mm and outer frame & mullion sections with rebate for glazed
932 shutters, fly mesh and a 20 mm provision for guard bars/grills and fly mesh shutter
section of 20 x 40 mm and the sections cut to length metre joined with corner
bracket, centre mullions fixed with mullion cap, stay, handles, latch 2 Nos of heavy
duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float
glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using rubber gaskets
including fixing the windows in the concrete/masonry wall by means of self
expanding screws, including 10mm Square guard bars with 6” (152.4mm) pitch ,
complete for finished item of work
Single shutter Window 2’0”x4’0” (609.6mm x 1219.2mm). Outer frame section size
933 BMT-P.28
of 72x50mm shutter frame section size of 48 x 25 mm.
1 Sqm 5625
Double shutter Window with vertical mullion 3’0” x 4’0” ( 914.4mm x 1219.2mm)
934 BMT-P.29 outer frame section size of 72x50mm shutter frame section size of 48 x 25 mm. 1 Sqm 5893
Mullion section size of 72x50mm.
Double shutter Window with vertical member4’0” x 4’0” (1219.2mm x 1219.2mm)
935 BMT-P.30 outer frame section size of 72x50mm shutter frame section size of 48 x 25 mm and 1 Sqm 5893
mullion section should be of 72x50mm.
Centre fixed both side openable shutter window 5’0”x4’0” (1524mm x1219.2mm).
Mullion section size of 72x50mm. Fixed beading section size of 12 x 12 mm.
Centre fixed both side openable shutter window 6’0”x4’0” (1828.8mm x1219.2mm).
Mullion section size of 72x50mm. Fixed beading section size of 12 x 12 mm.
Page # 45
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Providing and Fixing Pre-painted steel Sliding Window fabricated from Roll formed
sections made of galvanized Steel colour coated/powder coated (Base Steel as per
IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total
coated thickness of 0.58 mm, primer coat with epoxy primer of 5-7 microns thick,
finish painted with a polyester paint of 12-16 microns thick and back coated with
Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-
60 microns thick and the section for external frame bottom of 79 x 44 mm, external
938 BMT-P.33 frame sides and top of 69 x 24 mm, guide for top and bottom of 69 x 26 mm 1 sqm 4986
(Stainless Steel) and section for shutter of 26 x 30 mm and panelled with 5mm thick
plain float glass fitted with corner bracket for internal and external frame made of
glass filled nylon, gaskets made of Ethyl Propylene Diamine Monomer (EPDM),
sections cut to length, joined and assembled by means of corner bracket, including
fixing windows in the concrete/masonry walls by means of self expanding brackets
& screws including 10mm square guard bars with 6” pitch (152.4mm) and all taxes
etc., complete for finished item of work
939 BMT-P.34 deleted deleted
Supply & fixing of fly mesh shutters of size 20x40mm fly proof mesh with std. Spn
(S.S) fly mesh including cost and conveyance of all materials, and labour charges
964 BMT-P.59
etc. Complete for finished item of work including of all taxes. : Single shutter 2’-0” x
1 Sqm 893
4’-0” ( 609.6 x 1219.2mm) Shutter section size 20 x 40mm
965 BMT-P.60
etc. Complete for finished item of work including of all taxes. Double shutter 3’-0” x
1 Sqm 893
4’-0” (914.4 x 1219.2mm) shutter section size 20 x 40mm
966 BMT-P.61
etc. Complete for finished item of work including of all taxes. Double shutter 4’-0” x
1 Sqm 893
4’-0” (1219.2 x 1219.2mm) shutter section size 20 x 40mm
Supply & fixing of fly mesh shutters of size 20 x 40 mm fly proof mesh with Netlon fly
mesh including cost and conveyance of all materials, and labour charges etc.
967 BMT-P.62
complete for finished item of work including of all taxes. Single shutter 2’-0” x 4’-0”
1 Sqm 770
(609.6 x 1219.2mm) shutter section size 20 x 40mm
Page # 46
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
968 BMT-P.63
complete for finished item of work including of all taxes. Double shutter 3’-0” x 4’= 0”
1 Sqm 770
( 914.4 x 1219.2mm) shutter section size 20 x 40 mm
969 BMT-P.64
complete for finished item of work including of all taxes. Double shutter 4’-0” x 4’-0”
1 Sqm 770
(1219.2 x 1219.2 mm) shutter section size 20 x 40 mm
Supply and fixing fly mesh window with sections made of pre painted steel (Base
steel as per IS 513 of ‘D’ quality, Galvanized as per IS 277 with zink of 120 GSM),
primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester
paint of 12 to 16 microns thick and back coated with 5-7 microns thick alkyd baker
with total coated thick ness of 0.58 mm for shutter frame and 0.8 for outer frame,
the section for outer frame of 30 x 30 mm and fly mesh shutter section of 20 x
970 BMT-P.65
40mm outer frame sections with rebate for fly mesh shutters and sections cut to
1 Sqm 3615
lengh metre jointed with corner bracket and fitted with aluminum ‘T’ section of
double shutter & above, SS fly mesh shutter (304 grade) and EPD gasket including
fixing the frames in the concrete/ masonry wall by means of left expending screws,
latch, 2 nos of heavy duty GI pivot hinges provided per shutter (304 grade) including
all taxes complete for finished item of work.
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding windows
two track sliding duly manufactured using UPVC reinforced profiles of (62 mm x 60
mm)/(60 mm x 45 mm) x 2.0 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39
mm) x 2.0 mm for sliding shutter frames capable of mounting single glazing system,
structurally reinforced with hot dip galvanized up to 50 microns of minimum
971 BMT-P.66 sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with 1 Sqm 5074
TPV Gaskets/ EPDM weathering seal resistant accessories like locking system 1
No., per set of sashes and the system is to be installed at the site using anchor
fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost
and conveyance of all materials, accessories, labour charges for transportation,
erection at site with templates for casement sizing complete for finished item of
work
three track - only two glass shutters sliding duly manufactured using UPVC
reinforced profiles of (80 mm x 52 mm)/ (94 mm x 45 mm) x 2.0 mm for outer
frames, (54 mm x 38 mm)/(39 mm x 58 mm) x 2.20 mm for sliding shutter frames
capable of mounting single glazing system, structurally reinforced with hot dip
galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated &
972 BMT-P.67 welded through fusion welding the window sash shall be fitted with 5 mm thick clear 1 Sqm 4759
float glass of reputed make duly fixed with TPV Gaskets/ EPDM weathering seal
resistant accessories like locking system 1 No., per set of sashes and the system is
to be installed at the site using anchor fasteners, silicon rubber sealant, easy
glazing/ deglazing at site etc., including cost and conveyance of all materials,
accessories, labour charges for transportation, erection at site with templates for
casement sizing complete for finished item of work
three track - two glass shutters sliding and one mesh shutter duly manufactured
using UPVC reinforced profiles of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.0 mm for
outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.0 mm for sliding shutter
frames capable of mounting single glazing system structurally reinforced with hot
dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated &
welded through fusion welding the window sash shall be fitted with 5 mm thick clear
973 BMT-P.68 float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 1 Sqm 5298
mm x 21.5 mm) x 2 mm fitted with nylon/ polymer mesh on rollers/ pulley duly fixed
with TPV Gaskets/ EPDM weathering seal resistant accessories like locking system
1 No., per set of sashes and the system is to be installed at the site using anchor
work
Page # 47
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) casement

windows openable shutters duly manufactured using UPVC reinforced profiles of 48
mm x 60 mm x 2.0 mm for outer frames, 64 mm x 60 mm x 2.0 mm for mullion
sections for two or more openable shutters and 78 mm x 60 mm x 2.0 mm for
outward openable shutter frame or 70 mm x 60 mm x 2.0 mm for inward openable
shutter frame capable of mounting single glazing system structurally reinforced with
hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated
& welded through fusion welding the window sash shall be fitted with 5 mm thick
974 BMT-P.69 clear float glass of reputed make duly fixed with TPV Gaskets/ EPDM weathering 1 Sqm 5137
seal resistant accessories for casement window - friction stay hinges of stainless
steel grade 304- 2 Nos., per sash, handle with mazak alloy casting 1 No. per sash,
locking system suitably concealed 1 No., per sash provided with raiser wedges for
smooth operation and the system is to be installed at the site using anchor
work
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) casement
windows openable shutters duly manufactured using UPVC reinforced profiles of 60
mm x 55 mm x 2.0 mm for outer frames, 70 mm x 60 mm x 2.0 mm for mullion
sections for two or more openable shutters 70 mm x 60 mm x 2.0 mm for openable
shutter frame capable of mounting single glazing system structurally reinforced with
hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated
& welded through fusion welding the window sash shall be fitted with 5 mm thick
clear float glass of reputed make duly fixed with TPV Gaskets/ EPDM weathering
975 BMT-P.70
seal resistant and accessories for casement window - friction stay hinges of
1 Sqm 5598
stainless steel grade 304- 2 Nos., per sash, handle with mazak alloy casting 1 No.
per sash, multipoint locking system suitably concealed 1 No., per sash provided
with raiser wedges for smooth operation and the system is to be installed at the site
using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc.,
976 BMT-P.71 DELETED 1 Sqm
977 BMT-P.72 DELETED 1 Sqm
Galvanized powder coated Casement Windows with openable shutters duly
manufactured using pressed steel sections in mild steel conforming to IS 513 of
having 1.0 mm thick and galvanized as per IS 277 of 120 GSM surface treatment
with pure polyester powder coating of 30-40 microns thick and section for outer
frame of 60x50mm, centre for mullion of 62x50mm, section for shutter of 52 x 22
mm, outer frame and mullions to have one side rebate for glazed shutter of size 24
mm and 10x10 mm square guard bars provided at 125 mm c/c the sections
978 BMT-P.73
assembled with bolt & nut assembly with zinc-electroplated M-5 bolts, GI Handle of
1 Sqm 4514
size 80 mm x 15 mm -1 No per shutter, 2 nos of stainless steel heavy duty pivot
hinges of size 3" of SS 304 Grade per shutter, window panes with 5 mm thick plain
float glass and fixed with glass beading section of 10x12 mm size with 0.8 mm thick
powder coated aluminium 'U' channel and window frames fixing to the
concrete/masonry wall arrangement with self expanding screws, complete for
finished item of work including of all taxes - 1220 x 1372 or below size
Page # 48
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes

frame of 60x50mm, centre for mullion of 62x50mm, section for shutter of 52 x 22
mm, outer frame and mullions to have one side rebate for glazed shutter of size 24
mm and 10x10 mm square guard bars provided at 125 mm c/c the sections
979 BMT-P.74
assembled with bolt & nut assembly with zinc-electroplated M-5 bolts, GI Handle of
1 Sqm 4043
size 80 mm x 15 mm -1 No per shutter, 2 nos of stainless steel heavy duty pivot
hinges of size 3" of SS 304 Grade per shutter, window panes with 5 mm thick plain
float glass and fixed with glass beading section of 10x12 mm size with 0.8 mm thick
powder coated aluminium 'U' channel and window frames fixing to the
concrete/masonry wall arrangement with self expanding screws, complete for
finished item of work including of all taxes - 1530 x 1372 or above size

frame of 88x50mm, centre for mullion of 62x88 mm, section for glass and fly-proof
mesh shutter of 52 x 22 mm, outer frame and mullions to have two sides rebate for
glazed shutter of size 24 mm and 10x10 mm square guard bars provided at 125 mm
980 BMT-P.75 c/c the sections assembled with bolt & nut assembly with zinc-electroplated M-5 1 Sqm 5670
bolts, GI Handle of size 80 mm x 15 mm -1 No per shutter, 2 Nos of stainless steel
heavy duty pivot hinges of size 3" of SS 304 Grade per shutter, window panes with
5 mm thick plain float glass and fixed with glass beading section of 10x12 mm size
with 0.8 mm thick powder coated aluminium 'U' channel and fly-proof mesh of SS
304 grade fixed with 18 mm x 12 mm BT wood beading and window frames fixing
arrangement to the concrete/masonry wall with self expanding screws, complete for
finished item of work including of all taxes - 1220 x 1372 or below size

frame of 88x50mm, centre for mullion of 62x88 mm, section for glass and fly-proof
mesh shutter of 52 x 22 mm, outer frame and mullions to have two sides rebate for
glazed shutter of size 24 mm and 10x10 mm square guard bars provided at 125 mm
981 BMT-P.76 c/c the sections assembled with bolt & nut assembly with zinc-electroplated M-5 1 Sqm 5213
bolts, GI Handle of size 80 mm x 15 mm -1 No per shutter, 2 Nos of stainless steel
heavy duty pivot hinges of size 3" of SS 304 Grade per shutter, window panes with
5 mm thick plain float glass and fixed with glass beading section of 10x12 mm size
with 0.8 mm thick powder coated aluminium 'U' channel and fly-proof mesh of SS
304 grade fixed with 18 mm x 12 mm BT wood beading and window frames fixing
arrangement to the concrete/masonry wall with self expanding screws, complete for
finished item of work including of all taxes - 1530 x 1372 orabove size
Providing & Fixing of Mesh windows made of pre-painted steel (Base Steel as per
IS 513 of 0.58mm thick galvanized as per IS 277 with zinc of 120 GSM), primer
coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint
of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section
for outer frame of 47 x 36 mm, centre mullion of 60 x 36 mm, section mesh beading
982 BMT-P.77
18 x 6 mm and Fly mesh shutter section of 20 x 40 mm, the sections cut to length
1 Sqm 3503
meter joined with corner bracket and centre mullions fixed with mullion cap,
handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per S.S. Mesh for fly
mesh shutter (304 grade) including fixing the frames in the concrete/masonry wall
by means of self expanding screws complete for finished item of work.
Page # 49
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Providing & fixing white colour Rigid PVC window frame and shutter with single
rebate using frame section of 50 x 35 mm, centre mullion 50 x 47 mm and the
thickness of shutter 25 mm thick, the frame work made of M.S. Tube of 19 gauge of
size 15 x 15 mm and solid PVC Section made of 4 mm thick (3.75 mm PVC foam
sheet laminated with .25 mm rigid PVC sheet) and heat moulded PVC “C” section of
983 BMT-P.78
size 50 x 25 x 25 mm forming rails & stiles and reinforced with M.S.Tube of 19
1 Sqm Deleted
gauge of size 15 x 15 mm and suitably joined with solvent cement and fitted with 4
mm thick glass panel with Aluminium handles, tower bolts, hinges and stopper
complete as per direction of Engineer in-charge and manufacturers specification.
(All sizes with openable shutters)
Providing & fixing white colour Rigid PVC window frame and shutter with doouble
rebate (glass & mesh) using frame section of 42 x 115 mm made out of M.S.Tube of
19 gauge 15 x 15 mm and solid PVC section made from 4 mm thick (3.75 mm foam
sheet laminated with 0.25mm rigid PVC sheet Suitably joined using PVC solvent
cement and the window shutter of 25 mm thick heat moulded with PVC ‘C’ section
984 BMT-P.79
of size 50 x 25x 50mm forming rails & stiles and reinforced with with M.S.Tube of 19
1 Sqm Deleted
gauge 15 x 15 mm and glass and wire mesh fitted externally in the clear space
available between stiles and rails and fixed with PVC beading of size 23 mm x 16
mm complete as per direction of Engineer in charge and manufacturers
specification (All sizes with openable shutters)
Providing and fixing COMPOSITE SLIDING WINDOW fabricated from roll formed
sections made of Galvanized Steel colour Coated/Powder Coated (Base Steel as
per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams /Sq.Mtr.)
with total coated thickness of 0.58 mm, powder coated with pure Polyester Powder
up to 50-60 microns thick and the section for external frame bottom of 68 x 25mm
(Aluminium), External frame sides & Top of 68 x 25 mm (Aluminium), section for
shutter of 59 x 23mm and Lap Strip of 30 x 7.5mm (uPVC) cut to length and mitre
985 BMT-P.80 joined with L-bracket and 5 mm plain float Galss with Ethyl Propylene Diamine 1 Sqm 4375
Monomer (EPDM) gasket, the corner bracket for external frame made of Aluminium
‘L’-Angle, Corner Bracket for internal frame made of Polyproylene, Crescent Latch,
Rollers, & EPDM Gaskets for shutters, wool pile for lap strip, Bump Stop Base &
Rubber for shutter stopper including fixing to brick/concrete masonry using Nylon
self-expanding caps and driving MS electroplated 80mm long screws into the caps
through frames and fixing 10mm square guard bars with 6” pitch centre to centre
(152.4mm) and all taxes completed for finished item of work
Providing and fixing of Two shutter Sliding Windows made of Galvanized Steel
(Base Steel as per IS 513, D quality, galvanized as per IS 277 with Zinc of 120
GSM), using factory made section powder coated with Pure polyester powder upto
50-60 microns thick with total coated thickness of 0.8 mm for Outer Frame and 0.58
mm thickness for Sliding Shutter Section, the Outer Frame for Two Tracks with Grill
provision size of 90 mm x 50 mm and without grill provision is of 75 mm x 50 mm
and the Window Shutter section of 58 mm x 36 mm and the outer Frame with two
integrated guide tracks of 12mm width and 24mm deep for provision to slide the
986
Shutter / sash frame and facilitates with a water drain outlet component made of
PVC and the shutter frame fitted with 5mm thick plain float glass of reputed make
and fixed with EPDM weathering seal resistant accessories and handle made of
Alumimium 1 No. per each shutter and cut to length miter joined with corner
brackets including installation of window system at site using anchor fasteners,
Silicon sealant applied at the Outer frame corners inclusive of conveyance of all
materials accessories, labour charges, and erection at site with complete finished
item of work.
a) Window with Two Sliding Shutters and without Grill Outer Frame Size 75 mm x
987 BMT-P.81
50 mm.
1 Sqm 4209
b) Window with Two Sliding Shutters and with Grill Outer Frame Size 90 mm x 50
988 BMT-P.82 mm have a rebate of 15mm x 5 mm to fit grill made of 10mm MS Sq Rods for 1 Sqm 4668
horizontal bars welded at a regular pitch of 150mm to 12mm x 6 mm MS flat.
Page # 50
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Providing and fixing of Three shutter Sliding Windows made of Galvanized Steel
(Base Steel as per IS 513, D quality, galvanized as per IS 277 with Zinc of 120
GSM), using factory made section powder coated with Pure polyester powder upto
50-60 microns thick with total coated thickness of 0.8 mm for Outer Frame and 0.58
mm thickness for Sliding Shutter Section, the Outer Frame for three tracks with grill
provision size of 105 mm x 50 mm and without grill provision is of 90 mm x 50 mm
and the Window Shutter section of 58 mm x 36 mm and the outer Frame with two
integrated guide tracks of 12mm width and 24mm deep for provision to slide the
989
Shutter / sash frame and facilitates with a water drain outlet component made of
PVC and the shutter frame fitted with 5mm thick plain float glass of reputed make
and fixed with EPDM weathering seal resistant accessories and handle made of
Alumimium 1 No. per each shutter and cut to length miter joined with corner
brackets including installation of window system at site using anchor fasteners,
Silicon sealant applied at the Outer frame corners inclusive of conveyance of all
materials accessories, labour charges, and erection at site with complete finished
item of work.
Window with 3 shutters (center fixed shutter / Center sliding shutter / center Fly
mesh shutter) and with Grill Window made of Outer Frame of Size 105 mm x 50
990
mm. Grill made of 10mm MS Square Rods for horizontal bars at a regular pitch of
150mm welded to MS flat of 12 x 6 mm.
i) Center Shutter Fixed: center shutter frame made of section with size 20mm x
47mm should be fitted with 5mm thick plain float glass of reputed make, EPDM
991 BMT-P.83 gasket all around the glass and fixed to the Outer Frame with the supporting section 1 Sqm 4932
of size 29mm x 20mm of 0.58mm thick fixed horizontally on top and bottom of the
shutter frame.
ii) Center Shutter Sliding: center shutter frame made of section of size 20mm x
47mm should be fitted with 5 mm thick plain float glass of reputed make. The
supporting guide section of size 15mm x 19mm of 0.58mm thick fixed horizontally at
992 BMT-P.84
top and bottom of shutter frame and slides along the bottom and top guide tracks
1 Sqm 5400
made of sections size 24mm x 20mm of 0.58mm thick and 29mm x 20mm of
0.58mm thick
iii) Center Fly mesh Shutter Sliding: Section for Fly mesh Shutter frame should be
of size 20mm x 40mm of 0.58mm thick and fitted with SS mesh (304 Grade). The
supporting guide section of size 29mm x 20mm of 0.58mm thick at the bottom and
993 BMT-P.85
15mm x 19mm of 0.58mm thick at the top fixed horizontally to the Fly mesh frame
1 Sqm 5400
and slides along the bottom and top guide tracks made of sections size 20mm x
20mm of 0.58mm and 29mm x 20mm of 0.58mm.
Window with 3 shutters (Center fixed shutter / Center sliding shutter / center Fly
mesh shutter) and without Grill Window made of Outer Frame of size 90mm x
50mm.
i) Center Shutter Fixed: center shutter frame made of section with size 20mm x
47mm of 0.58mm thick should be fitted with 5mm thick plain float glass of reputed
994 BMT-P.86 make, EPDM gasket all around the glass and fixed to the Outer Frame with the 1 Sqm 4422
supporting section of size 29mm x 20mmof 0.58mm thick fixed horizontally on top
and bottom of the shutter frame.
ii) Center Shutter Sliding: center shutter frame made of section with size 20mm x
47mm of 0.58mm thick should be fitted with 5 mm thick plain float glass of reputed
make. The supporting guide section of size 15mm x 19mm of 0.58mm thick fixed
995 BMT-P.87
horizontally at top and bottom of shutter frame and slides along the bottom and top
1 Sqm 4838
guide tracks made of sections size 24mm x 20mm of 0.58mm thick and 29mm x
20mm of 0.58mm thick.
iii) Center Fly mesh Shutter Sliding: Section for Fly mesh shutter frame should be
of size 20mm x 40mm and fitted with SS mesh (304 Grade). The supporting guide
section of size 29mm x 20mm of 0.58mm thick at the bottom and 15mm x 19mm of
996 BMT-P.88
0.58mm thick at the top fixed horizontally to the Fly mesh frame and slides along the
1 Sqm 4838
bottom and top guide tracks made of sections size 20mm x 20mm of 0.58mm thick
and 29mm x 20mm of 0.58mm thick.
Page # 51
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Providing and fixing of Openable / Casement Windows made of pre-painted steel

(Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of
120 GSM), finish painted with a polyester paint of 60-65 microns thick and section
for outer frame of 80 x 45 mm, centre mullion of 80 x 60 mm, section for shutter of
52 x 25 mm x 0.6 mm thick, outer frame and mullions to have rebate for glazed
shutter with a provision for guard bars/grills and the sections cut to length metre
997
joined with corner bracket, centre mullion fixed with mullion cap, 1 No. of High
grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS
ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick
wall by means of self expanding screws, Including 10 mm Square guard bars with
Single openable shutter window size of 2’ 0” x 4’ 0” (609.6 x 1219.2mm) outer frame

998 BMT-P.89
section size of 80 x 45mm, shutter frame section size of 52 x 25mm thick
1 sqm 4039
Double openable shutter window Size of 3’ 0” x 4’ 0” (914.4mm x 1219.2mm) outer
999 BMT-P.90 frame section size of 80 x 45mm,shutter frame section size of 52 x 25mm, vertical 1 sqm 4294
mullion section size of 80 x 60 mm
Double openable shutter window size of 4’0” x 4’0” (1219.2mm x 1219.2mm) outer
1000 BMT-P.91 frame section size 80 x 45mm, shutter frame section size of 52 x 25 mm ,Vertical 1 sqm 4294
Double Openable Shutter and Center Fixed window of size 5’0 x 4’0 ( 1524 x
1219.2mm)outer frame section size of 80mm x 45mm, shutter frame section size of
1001 BMT-P.92
52 x 25mm ,Vertical mullion section size of 80 x 60 mm, beading section size of 9 x
1 sqm 3784
12mm to be provided for glass holding
Double Openable Shutter and Center Fixed window of size 6’0 x4’0 ( 1829.6 x
1219.2mm)outer frame section size of 80mm x 45mm , shutter frame section size of
1002 BMT-P.93
52 x 25mm ,Vertical mullion section size of 80 x 60 mm, beading section size of 9 x
1 sqm 3784
12mm to be provided for glass holding
Note: The above rates are for normal finish, 10% extra may be allowed for Wood
Grain finish
Providing and fixing of Openable / Casement Windows with fly mesh made of pre-
painted steel (Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277
with Zinc of 120 GSM), finish painted with a polyester paint of 60-65 microns thick
and section for outer frame of 100 x 45 mm, centre mullion of 100 x 60 mm, section
for shutter of 52 x 25 mm x 0.6 mm thick, section for fly-shutter of 52 x 25 mm x 0.6
mm thick and fitted with stainless steel 32 gauge fly mesh of 304 grade with 144
holes per sq.inch and mullions to have double rebate for glazed shutter and fly-
1003
shutter with a provision for guard bars/grills and the sections cut to length metre
joined with corner bracket, centre mullion fixed with mullion cap, 1 No. of High
grade nylon latch handle, window stopper, 2 nos. of with MS Powder coated /SS
ball bearing butt Hinges provided per shutter and windows fitted with 4 mm thick
wall by means of self expanding screws, Including 10 mm Square guard bars with
Single openable shutter window size of 2’ 0” x 4’ 0” (609.6 x 1219.2mm) outer frame
1004 BMT-P.94 Double rebate section size of 100 x 45mm, Glazed and flymesh shutter profile 1 sqm 5357
section size of 52 x 25mm
Double openable shutter window Size of 3’ 0” x 4’ 0” (914.4mm x 1219.2mm) outer
1005 BMT-P.95 frame Double rebate section size of 100 x 45mm, Glazed and flymesh shutter 1 sqm 5612
profile section size of 52 x 25mm, vertical mullion section size of 100 x 60 mm
Double openable shutter window size of 4’0” x 4’0” (1219.2mm x 1219.2mm) outer
1006 BMT-P.96 frame Double rebate section size of 100 x 45mm, Glazed and flymesh shutter 1 sqm 5612
profile section size of 52 x 25mm, vertical mullion section size of 100 x 60 mm
Double Openable Shutter and Center Fixed window of size 5’0 x 4’0 ( 1524 x
1007 BMT-P.97
52 x 25mm ,Vertical mullion section size of 100 x 60 mm , beading section size of 9
1 sqm 5102
x 12mm to be provided for glass holding
Page # 52
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Double Openable Shutter and Center Fixed window of size 6’0 x4’0 ( 1829.6 x
1008 BMT-P.98
52 x 25mm ,Vertical mullion section size of 100 x 60 mm , beading section size of 9
1 sqm 5102
x 12mm to be provided for glass holding
Grain finish
Providing and fixing of top hung Ventilators made of pre-painted steel (Base steel
as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of 120 GSM),
finish painted with a polyester paint of 60-65 microns thick and section for outer
frame of 80 x 45 mm, centre mullion of 80 x 60 mm, section for shutter of 52 x 25
mm x 0.6 mm thick, outer frame and mullions to have rebate for glazed shutter with
a provision for guard bars/grills and the sections cut to length metre joined with
1009
corner bracket, centre mullion fixed with mullion cap, 1 No. of High grade nylon
latch handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing
butt Hinges provided per shutter and windows fitted with 4 mm thick plain float glass
with rubber gaskets including fixing the frames in concrete/masonry wall by means
of self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm)
pitch etc., complete for finished item of work.
Single openable ventilator shutter size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) outer

1010 BMT-P.99
frame section size of 80 x 45mm, shutter frame section size of 52 x 25mm thick
1 sqm 4847
Double openable ventilator shutter Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm)

BMT-
1011
P.100
outer frame section size of 80 x 45mm,shutter frame section size of 52 x 25mm, 1 sqm 4847
vertical mullion section size of 80 x 60 mm
Double openable fix shutter size of 4’0” x 3’0” (1219.2mm x 914.4mm) outer frame
BMT-
1013
P.101
section size of 80 x 45mm , shutter frame section size of 52 x 25 mm ,Vertical 1 sqm 4847
BMT- Single fixed Louvers Ventilator size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) outer frame
1014
P.102 box section size of 80 x 45mm
1 sqm 3316
BMT- Double fixed Louvers ventilator Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm) outer

1015
P.103 frame box section size of 80 x 45mm, vertical mullion section size of 80 x 60 mm
1 sqm 3316
BMT- Double fixed Louvers Ventilator size of 4’0” x 3’0” (1219.2mm x 914.4mm) outer
1016
P.104 frame box section size of 80 x 45mm , Vertical mullion section size of 80 x 60 mm
1 sqm 3316
Grain finish
Providing and fixing of top hung Ventilator with fly mesh made of pre-painted steel
(Base steel as per IS 513 of 0.80 mm thick galvanized as per IS 277 with Zinc of
120 GSM), finish painted with a polyester paint of 60-65 microns thick and section
for outer frame of 100 x 45 mm, centre mullion of 100 x 60 mm, section for shutter
of 52 x 25 mm x 0.6 mm thick, section for fly-shutter of 52 x 25 mm x 0.6 mm thick
and fitted with stainless steel 32 gauge fly mesh of 304 grade with 144 holes per
sq.inch and mullions to have double rebate for glazed shutter and fly-shutter with a
1017
provision for guard bars/grills and the sections cut to length metre joined with corner
bracket, centre mullion fixed with mullion cap, 1 No. of High grade nylon latch
handle, window stopper, 2 nos. of with MS Powder coated /SS ball bearing butt
Hinges provided per shutter and windows fitted with 4 mm thick plain float glass with
rubber gaskets including fixing the frames in concrete/masonry wall by means of
self expanding screws, Including 10 mm Square guard bars with 6” (152.4mm) pitch
etc., complete for finished item of work.
Single openable ventilator shutter window size of 2’ 0” x 2’ 0” (609.6 x 609.6mm)
BMT-
1018
P.105
outer frame section size of 100 x 45mm, Glazed and flymesh shutter frame section 1 sqm 5995
size of 52 x 25mm thick
Double openable ventilator shutter window Size of 4’ 0” x 2’ 0” (1219.2mm x
BMT-
1019
P.106
609.6mm) outer frame section size of 100 x 45mm, Glazed and flymesh shutter 1 sqm 5995
frame section size of 52 x 25mm, vertical mullion section size of 100 x 60 mm
Double openable fix shutter window size of 4’0” x 3’0” (1219.2mm x 914.4mm) outer
BMT-
1020
P.107
frame section size 100 x 45mm , Glazed and flymesh shutter frame section size 52 1 sqm 5995
x 25 mm ,Vertical mullion section size of 100 x 60 mm
Page # 53
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Single fixed Louvers Ventilator window size of 2’ 0” x 2’ 0” (609.6 x 609.6mm) outer

BMT-
1021
P.108
frame box section size of 100 x 45mm, flymesh shutter frame section size 52 x 25 1 sqm 4039
mm
Double fixed Louvers ventilator window Size of 4’ 0” x 2’ 0” (1219.2mm x 609.6mm)
BMT-
1022
P.109
outer frame box section size of 100 x 45mm, flymesh shutter frame section size 52 x 1 sqm 4039
25 mm, vertical mullion section size of 100 x 60 mm
Double fixed Louvers Ventilator window size of 4’0” x 3’0” (1219.2mm x 914.4mm)
BMT-
1023
P.110
outer frame box section size 100 x 45mm , flymesh shutter frame section size 52 x 1 sqm 4039
25 mm Vertical mullion section size of 100 x 60 mm
Grain finish
Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi
chambered uPVC sections with TPV gaskets having isolated drainage and
reinforced with Galvanized Iron profiles throughout the window. The outer frame
BMT-
1024
P.111
having an overall size of 60 x 55 mm with reinforcement of 1 mm thickness and 1 sqm 4767
Mullion with overall size of 74 x 60 mm with reinforcement of 1 mm thickness.
Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall
thickness of frame & Mullion shall be 2.0 mm
Providing, supplying & fixing of Top hung Ventilator With Exhaust Fan Provision
made out of multi chambered uPVC sections with TPV gaskets having isolated
drainage and reinforced with Galvanized Iron profiles throughout the window. The
outer frame having a overall size of 60 x 55 mm with reinforcement of 1 mm
BMT- thickness, Mullion with overall size of 74 x 60 mm with reinforcement of 1 mm
1025
P.112 thickness and Sash with overall size of 75 x 60 mm with reinforcement of 1.5 mm
1 sqm 6708
thickness. Glazing bead for fixing of glass shall be of size 34 x 20 mm coextruded
with gasket. Ventilator shall be provided with 4.5 mm Pin Head glass, standard
hardware, single point locking and friction stays. Wall thickness of frame, mullion
and sash shall be 2.0 mm
Q. STRUCTURAL GLAZING
Providing and fixing Structural Glazing fabricated from Roll formed sections made
of Pre-painted Steel / Powder coated (Base steel as per IS 513 of ‘D’ quality,
galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total coated thickness of
0.72 mm and the glass holding section made of 304 grade stainless steel of 0.58
mm thick galvanised steel section as stiffeners inside the colour coated steel
powder coated sections as per the design requirement & calculations to suit wind
pressures as given in IS: 875, the primer coat with epoxy primer of 5 – 7 microns
thick, finish painted with a polyester paint of 12-16 microns thick and back coated
with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to
50-60 microns thick and the vertical section of 50 mm x 99 mm x 0.72 mm, 33 mm x
1039 BMT-Q.01
56 mm x 0.72 mm for frame horizontal section, stiffener section of 47 mm x 97 mm x
1 Sqm 5357
1 mm, cover profiles sections of 20 mm x 58 mm x 0.58 mm, glass holding section
of 37 mm x 37 mm & 37 mm x 18 mm including fixing 5mm thick Ocean Blue
reflective glass, brackets made of CRCA powder coated/Electroplated to connect
vertical to horizontal, vertical to slab, to fix verticals at top & bottom as per site
requirement and gasket made of Ethyl Propylene Diamine Monomer, U.V. resistant
silicon sealant including fixing in concrete/masonry wall with self-expanding cap &
screws inclusive of cost and conveyance of all materials to site, all labour charges,
incidental charges, cost of all consumables etc. and fixing charges complete for
Page # 54
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Providing and fixing Top Hung shutters in Structural Glazing fabricated from Roll
formed sections made of Pre-painted Steel / Powder coated (Base steel as per IS
513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 Gm/Sqm) with total
coated thickness of 0.72 mm and the glass holding section made of 304 grade
stainless steel of 0.58 mm thick, duly providing stiffeners inside the colour coated
steel/powder coated sections as per the design requirement, calculations to suit
wind pressures as given in IS 875 and primer coat with epoxy primer of 5-7 microns
1040 BMT-Q.02
thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure
1 Sqm 4331
polyester powder up to 50-60 microns thick and the outer frame of 20 mm x 58 mm
x 0.58 mm, shutter sections of 57 mm x 33 mm x 0.72 mm, stiffener sections of 55
mm x 31 mm x 1mm, hinges – 2 Nos for each shutter and aluminium Stays – 2 Nos.
for each shutter, aluminium Handle – 1 no. for each shutter including cost and
conveyance of all materials to site, all labour charges, incidental charges, cost of all
consumables etc. and fixing charges etc for finished item of work
Supplying and fixing of curtain Glazing made of pre painted steel (base steel as per
IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM)
Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester
paint of 12- 16 microns thick and back coated with 5-7 microns thick alkyd backer
using the section for outer frame of 46 x 52 mm, section for mullion of 46 x 70 mm
and section for beading of 18 x 25 mm and the glazing with 5 mm thick plain float
1041 BMT-Q.03 glass fitted with Ethyl Propylene diameine Monomer (EPDM) gaskets and the 4420
sections cut to length, mitre joined with corner bracket, centre mullions fixed suing
mullion cap inluding handle made of high grade Aluminium powder coated and
nylon receiver, corner brackets made of CRCA with zinc phosphating, mullion caps
made of Glass filled nylon including fixing the frames in the concrete / masonry wall
with self expanding screws, etc., complete for finished item.- Fixed Glazing 2'-0" x 2'-
0" (609.6x609.6mm) grid outer frames section size of 46 x 52 mm
Mullion section size of 46 x 70mm Beading section size of 18 x 25 mm - Fixed

1042 BMT-Q.04
Glazing 2'-0" x 3'-0" (609.6x914.4mm) grid outer frame section size of 46 x 52 mm
1 Sqm 4420
Mullion section size of 46 x 70mm Beading section size of 18 x 25 mm Fixed

1043 BMT-Q.05
1 Sqm 3750
Mullion section size of 46 x 70mm Beading section size of 18 x 25 mm Fixed

1044 BMT-Q.06
1 Sqm 3750
1045 BMT-Q.07 deleted Deleted
Page # 55
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) Curtain Walling
systems duly manufactured using UPVC reinforced profiles of 60 mm x 56 mm x 2.5
mm for outer frames, 60 mm x 70 mm x 2.5 mm for casement shutter frames and
the mullion sections are of 60 mm x 70 mm x 2.5 mm or 60 mm x 62 mm x 2.5 mm
for sliding shutter outer frames and 77 mm x 38 mm x 2.5 mm for sliding shutter
frames structurally reinforced with hot dip galvanized up to 50 microns of minimum
thickness of 1 mm the sash shall be fitted with 5 mm thick clear float glass of
1051 BMT-Q.13 reputed make duly fixed with EPDM weathering seal resistant and accessories for 5480
casement window - friction stay hinges of stainless steel grade 304- 2 Nos., per
sash, handle with mazak alloy casting 1 No. per sash, multipoint locking system
suitably concealed 1 No., per sash provided with raiser wedges for smooth
operation for sliding window - clipping locking system 1 No. made of aluminium
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) Fixed Glazing - 48
series duly manufactured using UPVC reinforced profiles of 60 mm x 48 mm x 2.25
mm for outer frames and the mullion sections are of 60 mm x 76 mm x 2.25 mm
frames are structurally reinforced with hot dip galvanized up to 50 microns of
1052 BMT-Q.14 minimum thickness of 1.2 mm the sash shall be fitted with 5 mm thick clear float 1 Sqm 2572
glass of reputed make duly fixed with EPDM weathering seal resistant including
cost and conveyance of all materials, accessories, labour charges for
Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) Fixed Glazing - 56
series duly manufactured using UPVC reinforced profiles of 60 mm x 56 mm x 2.25
mm for outer frames and the mullion sections are of 60 mm x 70 mm x 2.25 mm
frames are structurally reinforced with hot dip galvanized up to 50 microns of
1053 BMT-Q.15 minimum thickness of 1.2 mm the sash shall be fitted with 5 mm thick clear float 1 Sqm 3074
glass of reputed make duly fixed with EPDM weathering seal resistant including
cost and conveyance of all materials, accessories, labour charges for
A. DISMANTLING clearing away and carefully stacking materials useful for
S.
reuse.
1054 BMT-S.01 Stone masonry in cement mortar 1 Cum 306
1055 BMT-S.02 Terracing work in roofs or floors 10 Sqm 127
1056 BMT-S.03 Flat stones in roof or floors including lifting 10 Sqm 106
1057 BMT-S.04 Pan tiled or Mangalore tiled roof without roof timbers. 10 Sqm 96
1058 BMT-S.05 Flat and pan tiles or Mangalore tiles over flat tiles without roof timbers 10 Sqm 106
1059 BMT-S.06 Wrought and framed timber in roofs or floors 1 Cum 160
1060 BMT-S.07 Old lime mortar plaster 10 Sqm 33
1061 BMT-S.08 Old cement mortar plaster 10 Sqm 37
1062 BMT-S.09 Dry rough stone revetment for aprons and stacking within 40 M lead 1 Cum 51
1063 BMT-S.10 Revetment for aprons and stacking grouted within 40 lead 1 Cum 37
1064 BMT-S.11 Kadapa slabs or Shahabad stone slabs flooring on sand bed 10 Sqm 53
1065 BMT-S.12 Through scraping of old plastered surface 10 Sqm 33
Washing of plastered surface with soap, soda and water (or with soda lime and
1066 BMT-S.13
water)
10 Sqm 11
clean removal of lime plaster from walls and raking out joints 20mm deep or from
1067 BMT-S.14
terraced roof and raking out joints 100 mm deep
10 Sqm 34
1068 BMT-S.15 Clean removal of cement plaster from walls and raking out joint 200 mm deep 10 Sqm 36
T. READY MIX CONCRETE
1069 BMT-T.01 Deleted Deleted
U. EXPANSION JOINT FILLERS Deleted
Page # 56
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Supply of high performance expansion joint filler board conforming to M.O.S.T -

1074 BMT-U.01
18 mm THICK
1 Sqm 586
Supply of high performance expansion joint filler board conforming to M.O.S.T -
1075 BMT-U.02
20 mm THICK
1 Sqm 657
Supply of high performance expansion joint filler board conforming to M.O.S.T - 25
1076 BMT-U.03
mm THICK
1 Sqm 820
Supply of expansion joint filler board for buildings, columns, beams and slabs 20
1077 BMT-U.04
mm THICK
1 Sqm 235
1078 BMT-U.05
mm THICK
1 Sqm 293
1079 BMT-U.06
mm THICK
1 Sqm 586
Supply of back up to cold applied sealant in construction and longitudinal joint - 10
1080 BMT-U.07
mm OD
1 RM 9
1081 BMT-U.08
mm OD
1 RM 11
1082 BMT-U.09
mm OD
1 RM 13
1083 BMT-U.10
mm OD
1 RM 19
1084 BMT-U.11
mm OD
1 RM 23
V. LABOUR CHARGES
Bailing out water for earth work excavation /concrete for foundation below water
1085 BMM-V.01
level. (For building items only) - Other than sandy soil - 0.0 M to 1.0 M
1 cum 187
1086 BMM-V.02
1 cum 221
1087 BMM-V.03
1 cum 257
Bailing out water for earth work excavation / for concrete foundation below water
1088 BMM-V.04
level. (For building items only) Sandy soil - 0.0 M to 1.0 M
1 cum 296
Bailing out water for earth work excavation /for concrete foundation below water
1089 BMM-V.05
1 cum 460
1090 BMM-V.06
1 cum 555
Labour charges for making, fabricating office furniture, racks, work-station furniture,
cup-board shutters with ply-wood/ MDF sheets, decolam/ veneer laminations
1091 BMM-V.07 including fixing cutting, making, assembling, fixing hinges, fixing fixtures, fixing 1 Sqm 467
locks, pasting sheets/ laminations fixing in position with necessary screws excluding
cost of materials, accessories, fittings
Labour charges for making, fabricating kitchen furniture, cup-boards with shutters,
box cup-boards, box racks, with ply-wood/ MDF sheets, decolam/ veneer
1092 BMM-V.08 laminations including fixing cutting, making, assembling, fixing hinges, fixing 1 Sqm 713
fixtures, fixing locks, pasting sheets/ laminations fixing in position with necessary
screws excluding cost of materials, accessories, fittings
Rounding the edges of Kadapa / Shahabad stone slabs of any thickness including
1093 BMM-V.09
polishing the same
1 Rm 80
Half Rounding the edges of Marble/ Granite stone slabs of all thicknesses including
1094 BMM-V.10
polishing the same.
1 Rm 245
Full Rounding the edges of Marble/ Granite stone slabs of all thicknesses including
1095 BMM-V.11
polishing the same.
1 Rm 317
Machine Cutting charges - for Marble/ Granite slabs up to 50 mm thick by
1096 BMM-V.12
mechanical device.
1 RM 13
1097 BMM-V.13 Flat nosing to Kadapa/ Shahabad stone slabs of any thick 1 Rm 13
Labour charges for fabricating steel works like Window Grills, Compound Wall
1098 BMM-V.14 Grills, Iron Doors, Windows including cost of welding rods, power charges, 1 Kg 20
excluding cost of fixing in position
1099 BMM-V.15 Labour charges for fixing Iron Doors, Iron Windows and Window Grills in position 1 Kg 4
Labour charges for fabricating all heavy steel works like Trusses, Stanchions,
1100 BMM-V.16 Heavy Beams and Girders including cost of welding rods, power charges, etc 1 Kg 18
excluding cost of fixing in position
Page # 57
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Labour charges for fixing heavy iron grills, Trusses, Stanchions, Heavy Beams and
1101 BMM-V.17 Girders erecting in position and fixing by using chain pulley blocks, Derek pole 1 Kg 16
arrangements and cranes etc., complete in position
Labour charges for Fabrication of stainless steel railing works using stainless steel
1102 BMM-V.18 welding rods including buffing, polishing, lacquer finishing, to present seamless 1 Kg 101
finish
Labour charges for Fabrication of stainless steel sheet cladding works using
1103 BMM-V.19 stainless steel welding rods including buffing, polishing, lacquer finishing, to present 1 sqm 1354
seamless finish
Labour charges for Glass designing works on any thickness of Glass including
1104 BMM-V.20
fixing at site - Etching works
1 Sqm 737
1105 BMM-V.21
fixing at site - Reverse Etching work
1 Sqm 911
1106 BMM-V.22
fixing at site - Acid wash works
1 Sqm 1139
Labour charges for fixing Flush door shutters of any thickness to the existing door
1107 BMM-V.23
frame including fixing the fixtures to the door shutter excluding cost of shutter
1 Sqm 295
Labour charges for fixing glass panes of any thickness to the existing door / window
1108 BMM-V.24
panes including fixing the beading excluding cost of beading
1 Sqm 221
W. MISCELLANEOUS ITEMS
BMS- Supplying Aluminium anodised Sections for Doors, partitions, windows, Ventilators
1136
W.01 (including annodization cost)
1 Kg 286
BMS-
1137
W.02
Sun Control film to the glazed windows partition including labour charges. 1 sqm 292
BMS-
1138
W.03
Aluminium Venetian Blinds horizontal 25.4 mm wide with all accessories. 1 sqm 745
BMS-
1139
W.04
Aluminium Venetian Blinds horizontal 20.0 mm wide with all accessories. 1 sqm 710
BMS-
1140
W.05
Venetian blinds Vertical blinds 100 mm wide with all accessories. 1 sqm 1205
BMS-
1141
W.06
Rubber Beading 1 RM 2
BMS-
1142
W.07
S&F of marblex flooring with 2.0 mm thick in rolls. 1 sqm 374
BMS-
1143
W.08
S&F Vinyl Flooring with 1.5 mm thick in rolls 1 sqm 374
BMS-
1144
W.09
Chlorpyriphos/ Lindane emulsifiable concentrate of 20% 1 Litre 203
BMS-
1145
W.10
Soft Brush Each 117
BMS-
1146
W.11
Wire Brush Each 26
Supplying and fixing aluminium composite cladding with skin material 0.25 mm thick
aluminium sheet cover material natural polyethylene aluminium cladding panel fixed
with extruded aluminium basis frame (50x25x1.5mm) angle cleats, weather
BMS-
1147
W.12
sealants, rivets, GI brackets all as approved, using suitable bolts on structural steel 1 Sqm 1832
work including necessary accessories complete in all respects including all
scaffolding and labour charges etc., complete for finished item of work but
excluding cost of structural steel fabrication, if any, ACP Cladding - 3 mm thk
BMS-
1148
W.13
Page # 58
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMS-
1149
W.14
BMS-
1150
W.15
CEMENT JALI - 25 mm thick 1 sqm 179
BMS-
1151
W.16
BMS-
1152
W.17
BMS-
1153
W.18
Aluminium sheet 24 Gauge 1 Sqm 240
BMS-
1154
W.19
7.5mm thick Aluminium Grill (as approved by the department) 3.58 Kg/Sqm. 1 Sqm 883
BMS-
1155 Mastic pad 2'0 " x 4'0" (0.60M x 1.2M) of 1" (25.4 mm ) thick 1 Sqm
W.20
BMS-
1156
W.21
Mastic pad 2'0 " x 4'0" (0.60M x 1.2M) of 1/2" (12.7 mm ) thick 1 Sqm 451
Supply of hot pressed compression moulded sign plates for making road signs ass
1157 per the approved dimensions of National Highway Authority Of India, complete, for
BMS-
1158
W.22
Circular sign plate Dia 400mm. Each. 458
BMS-
1159
W.23
Circular sign plate Dia 600mm. Each. 1204
BMS-
1160
W.24
Circular sing plate Dia 870mm Each. 2413
BMS-
1161
W.25
Triangular sign plate 600mm. Each. 618
BMS-
1162
W.26
Triangular sign plate 900mm. Each. 1396
BMS-
1163
W.27
Square sign plate 600mm. Each. 1119
BMS-
1164 Square sign plate 1000mm. Each.
W.28
BMS- Supply of Polyethylene water storage tank double layer conforming to IS:12701-
1165
W.29 1996 with lid.
Litre. 7
Design, fabrication & supply of light weight pre engineered buildings for a maximum
span of 9 metres with 50 x 50 x 2.8 mm M.S hollow square tubes for columns,
trusses & purlins walls with sandwich panels made up of 2 Nos 10mm thick cement
bonded particle/ fibre boards with 25mm thick 12 kg/cum density expanded
polystyrene in between encased in 1.25 mm thick 24x7x26 mm ‘W’ tracks in bottom
1166
& top and ‘H’ section for sides with doors, windows & ventilators, roofing with 26
gauge pre painted profiled sheets fixed with self tapping/ drilling screws, painting
with enamel paint for steel items, OBD for interiors and ace for exteriors & providing
base plates, templates & anchor bolts along with civil foundation designs &
drawings for the finished item of work
BMS- Steel Structure: - Structure is made up of 50x50X 2.8 m/33x66x2.8mm thick hollow
1167
W.30 M.S. sections for Trusses, columns, and purloins. - Columns
1 RM 322
BMS- Steel Structure: - Structure is made up of 50x50X 2.8 m/33x66x2.8mm thick hollow
1168
W.31 M.S. sections for Trusses, columns, and purloins. Trusses
1 RM 1473
10 mm thick 200x200 mm M.s. plates for base plates, 250 mm long 12mm Φ anchor
BMS-
1169
W.32
bolts with plate washer and nuts complete with one coat of Asian or equivalent red Each 560
oxide paint.
Sandwich panels: Sandwich panels of 50 mm thick with 25 mm thermocol of 12 kg /
BMS- cum, fixed in between 2 Nos 10 mm cement bonded wood particle / fibre boards
1170
W.33 properly fixed together with 30 mmx30mmx30mm wood pieces along width & length
1 Sqm 1166
wherever necessary
Page # 59
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMS- U' Tracks & 'H' Section:- Bottom & Top 'U' Tracks are made of 1.25 mm thick 120
1171
W.34 GSM G.I. Sheet of size 24x51x26 mm size.
1 RM 126
BMS- Fabricated 'H' sections are made up of 2 Nos 1.25 mm thick C.R. Of 40 mm width
1172
W.35 for flanges and 1 Nos of 2 mm thick C.R. of 50 mm width plate for web. will be used
1 RM 181
Sandwich Panel joinery is made up of couplers or equivalent made from 0.6 mm
BMS-
1173
W.36
G.I. roll formed section to hold 2 Nos of 10 mm board on both sides with 25 mm 1RM 206
thermocol in between.
Window:- windows are made up of 51 x51 mm step 'U' section made from 1.25 thick
BMS- MS Cold rolled Steel Sheet and Windows Shutters & Grill are made of 48x25mm
1174
W.37 mm size pre painted section with 4 mm glass complete with necessary hardware.
1 Sqm 3743
Grills are made from 8 mm square rod at 100 mm spacing.
Door Frames :-51 X 51 Stepped ' U' section made from 1.25 mm thick C.R. section
BMS- with a 32 mm rebate for 30 mm flush door and Door Shutters with 30 mm thick
1175
W.38 block board / flush doors with boiling water proof plywood complete with necessary
1 Sqm 3583
Hard ware.
BMS- Ventilators:- Ventilators are made of 51x51 mm step 'U' section made From 1.25
1176
W.39 mm thick C.R. sheet with fixed louvers and glass.
1 Sqm 4010
BMS-
1177
W.40
Painting:-1) Steel structure is to be painted with 2 coats of Grade I enamel paint. 1 Sqm 101
BMS- 2) Exterior walls are painted with one coast of primer and 2 coats of exterior
1178
W.41 emulsion paint .
1 Sqm 91
BMS-
1179
W.42
3) Interiors are painted with 1+2 coat of O.B.D. 1 Sqm 79
Toilets: - Toilets are provided as per plan with a provision for fixing the wash basin,
BMS-
1180
W.43
W.C. etc only is made with M.S. steel section secured to the walls with toilet bracket Each 856
provision excluding cost of WC/ Wash basin etc
Sun shades: - Sun shades will be provided wherever necessary with 300 mm more
BMS- than the width of window. 25x25 mm angle frame to cover 450 mm in the front and
1181
W.44 the sides. 10mm cement bonded particle board will be fixed on the frame work and
Each 2887
sealed with green paste or equivalent.
Roofing: - Roofing will be provided with 0.5mm thick galvanized / pre painted G.I.
BMS- profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene
1182
W.45 washer. Side laps are stitched with self tapping / drilling screws. End laps are to be
1 Sqm 652
sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove.
Supply and fixing of factory made Bathroom door frames without threshold,
fabricated from pre-painted cold roll formed section 50mm x 50 mm made of
galvanized (base steel as per IS – 513 ‘D’ quality, galvanized as per IS-277 with
Zinc of 120 Gms/sqm) steel colour coated sections with total coated thickness of 1
mm, primer coated with epoxy primer of 5-7 microns thick, finish painted with
1183 polyester paint of 12-16 microns and back coated with alkyd backer of 5-7 microns 0
and the frame section filled with polyurethane (P.U. Foam) of 40 Kg/Cum; and the
sections cut to length and mitre joined by means of 1.25mm thick CRCA
electroplated corner brackets of size 75 x 75 mm and 1.25mm thick electroplated
stiffeners of size 150mm for fixing hold fasts and hinges together with the following
MS Power coated fitting (Supply and fixing) of approved make.
a) 6 Nos M.S. Z. Type hold fasts made of 30mm x 3 mm MS flat of 230mm long, 3
1184
Nos each side expandable PVC covered screw type fasteners
0
b) 2.5 mm x 300 mm long ‘T’ hinges / 2.5mm x 50 mm x 100mm two way but hinges
1185
(3 Nos for single leaf or 2 Nos for Double leaf /leaf )
0
BMS-
1186
W.46
c) 12 mm Dia MS tie rod at bottom with necessary size of nuts on either side. 1 RM 340
BMS-
1187
W.47
Preparing gabions with jungle wood Each 3
BMS-
1188
W.48
Planting plants Each 2
BMS-
1189
W.49
Pruning plants Each 2
BMS-
1190
W.50
Maintaining avenues including fencing, weeding, mulching, watering etc per plant. Each 6
Page # 60
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMS-
1191
W.51
- do - When scattered in hot weather with extra conveyance from March to June Each 6
BMS-
1192
W.52
Hoisting or lowering of slab 1 cum 83
BMS-
1193
W.53
Dressing faces of granite stone (double line dressing) 1 Sqm 138
BMS-
1194
W.54
Dressing faces of other than granite stone(double line dressing) 1 Sqm 86
Supply of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm
thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint
BMS-
1195
W.55
coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 1 Sqm 362
Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters
with Regular Range Colours
Supply of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm
thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint
BMS-
1196
W.56
Supply of Pre-painted Galvanized Trapezoidal Profile Roofing sheets with 0.50mm
thickness, Coating: Zinc coating Z120 GSM. Tensile Strength: 300 MPA. Paint
BMS-
1197
W.57
Supply of Pre-painted Galvanized Trapezoidal Profile Roofing sheets with 0.47mm
thickness, Coating: Zinc coating Z120 GSM. Tensile Strength: 300 MPA. Paint
BMS-
1198
W.58
Supply of Roof Accessories medium size: Ridge, Barge Cap, Corner Trim, L-
BMS-
1199
W.59
Flashing, Down Pipes, Gutter etc., with 0.50mm thick, Width: 0.585, Length: 1 RM 244
Maximum 2½ Meters
Supply of Roof Accessories medium size: Ridge, Barge Cap, Corner Trim, L-
BMS-
1200
W.60
Flashing, Down Pipes, Gutter etc., with 0.47mm thick, Width: 0.585, Length: 1 RM 218
Maximum 2½ Meters
BMS-
1201
W.61
75 mm long screws - 1 Each 3
BMS-
1202
W.62
G.I scam bolts & nuts 1 Each 4
BMS-
1203
W.63
G.I bolts & nuts 1 Each 4
BMS-
1204
W.64
G.I ‘J’ bolts 8 mm dia 1 Each 8
BMS-
1205
W.65
G.I Washers 1 Each 1
BMS-
1206
W.66
Limpet washers (for scam & ‘J’ bolts) 1 Each 0
BMS-
1207
W.67
Bitumen washers 1 Each 0
BMS-
1208
W.68
White Cement 1 Kg 23
1223 X. MACHINERY CHARGES, HIRE CHARGES FOR CENTRING
1224 BMC-X.01 Machine charges of rubbing/ polishing floor 1 day 1562
1225 BMC-X.02 Power Saw Cutter - Hand Operated - Hire charges 1 Hr 91
1226 BMC-X.03 Power Drill - Hand Operated - Hire Charges 1 Hr 84
1227 BMC-X.04 Grinding Mortar (Spl Grinding) 1 day 781
1228 BMC-X.05 Casuarina Balli Props - 3" to 4" dia - 12'-0" Height Each 53
1229 BMC-X.06 Casuarina Balli Props - 4" to 8" dia - 20'-0" Height Each 88
1230 BMC-X.07 Wall Plate Brackets / beam bottom supports Each 154
1231 BMC-X.08 Wedge Plate fixture Each 7
1232 BMC-X.09 Runner beams of approximately 4" x 4" size RM 310
1233 BMC-X.10 Steel Plates for form works 1 sqm 1091
Page # 61
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
1234 BMC-X.11 Scaffolding Pipes & Centering accessories 1 Kg 82

1235 BMC-X.12 Scaffold Boards - Bamboo scaffolds - Bamboos - 8'0" long Each 88
A S.W.G. PIPES & FITTINGS
Supplying, laying, jointing and testing 101.6 mm SWG SP-1 pipes of ISI make
BMW- conforming to ISI 651 & 4127 with airtight cement joints in CM 1.5:1 prop. Including
1
A.01 excavation of trenches and socket pits in any soil (except rock requiring blasting) up
1 RM 236
to 1524 mm(5'0") depth and refilling with watering and tamping.
BMW- conforming to ISI 651 & 4127 with airtight cement joints in CM 1:5:1 prop. including
2
1 RM 127
to 914.4 mm (3'0") depth and refilling with watering and tamping.
BMW- conforming to ISI 651 & 4127 with airtight cement joints in CM 1.5:1 prop. including
3
1 RM 351
to 1524 mm(5'0") depth and refilling with watering and tamping.
BMW- conforming to ISI 651 & 4127 with airtight cement joints in CM 1.5:1 prop. including
4
1 RM 250
to 914.4 mm (3'0")) depth and refilling with watering and tamping.
labour charges only for laying, jointing and testing SWG pipes of any dia with air
BMW- tight cement joints including excavation of trenches and socket pits in any soil up to
5
A.05 914.4 mm (3'0") depth (except rock requiring blasting) and refilling with watering
1 RM 113
and tamping.
labour charges only for laying, jointing and testing SWG pipes of any diawith airtight
BMW- cement joints including excavation of trenches and socket pits in any soil up to 1524
6
A.06 mm (5'-0") depth (except rock requiring blasting) and refilling with watering and
1 RM 154
tamping.
a)Supplying, laying, jointing and testing 152.4 mm CC bed 1:2:4 Prop: using
BMW-
7
A.07
19.05mm gauge graded granite metal chips and cradling 101.6 mm SWG pipe line 1 RM 61
all round to have 76.2 mm thick cover over the sockets.
BMW-
8
A.08
b) - do - labour charges only 1 RM 9
a)Supplying , laying, jointing and testing 152.4 mmCC bed 1:2:4 Prop: using
BMW-
9
A.09
19.05mm gauge graded granite metal chips and cradling 152.4 mm SWG pipe line 1 RM 80
all round to have 76.2 mm thick cover over the sockets.
BMW-
10
A.10
BMW- a) Supplying & Laying 101.6 mm SWG channels with cement mortar joints with
11
A.11 suitable brick masonry for fixing the channels in position
1 RM 43
BMW-
12
A.12
BMW- a) Supplying & Laying 152.4 mm SWG channels with cement mortar joints with
13
A.13 suitable brick masonry for fixing the channels in position
1 RM 93
BMW-
14
A.14
BMW-
15
A.15
Supply of SWG SP-1 Pipe conforming to ISI 651- 4" dia (101.6mm) 1 RM 144
BMW-
16
A.16
BMW-
17
A.17
Supply of SWG SP-1 Pipe conforming to ISI 651-8" dia (203.2mm) 1 RM 385
BMW-
18
A.18
Supply of SWG SP-1 Pipe conforming to ISI 651- 10" dia (254 mm) 1 RM 705
BMW-
19
A.19
BMW-
20
A.20
BMW-
21
A.21
Page # 62
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW-
22
A.22
BMW-
23
A.23
BMW-
24
A.24
BMW-
25
A.25
BMW-
26
A.26
BMW-
27
A.27
BMW-
28
A.28
BMW-
29
A.29
BMW-
30
A.30
BMW-
31
A.31
BMW-
32
A.32
BMW-
33
A.33
BMW-
34
A.34
BMW-
35
A.35
BMW-
36
A.36
BMW-
37
A.37
BMW-
38
A.38
BMW-
39
A.39
Supply of SWG Bends conforming to IS standards -100 mm dia Each 72
BMW-
40
A.40
BMW-
41
A.41
BMW-
42
A.42
BMW-
43
A.43
BMW-
44
A.44
BMW- Supply of SWG Junctions (T's & Y's) conforming to IS standards with length of
45
A.45 barrel 60 cm for - 100 x 100
Each 139
46
A.46 barrel 60 cm for - 150 x 100
Each 205
47
A.47 barrel 60 cm for - 150 x 150
Each 223
48
A.48 barrel 60 cm for - 200 x 100
Each 317
49
A.49 barrel 60 cm for - 200 x 150
Each 372
50
A.50 barrel 60 cm for - 200 x 200
Each 426
51
A.51 barrel 60 cm for - 250 x 100
Each 501
52
A.52 barrel 60 cm for - 250 x 150
Each 662
Page # 63
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
53
A.53 barrel 60 cm for - 250 x 200
Each 819
54
A.54 barrel 60 cm for - 250 x 250
Each 980
55
A.55 barrel 60 cm for - 300 x 100
Each 714
56
A.56 barrel 60 cm for - 300 x 150
Each 915
57
A.57 barrel 60 cm for - 300 x 200
Each 1116
58
A.58 barrel 60 cm for - 300 x 250
Each 1317
59
A.59 barrel 60 cm for - 300 x 300
Each 1517
60
A.60 barrel 60 cm for - 350 x 100
Each 891
61
A.61 barrel 60 cm for - 350 x 150
Each 1143
62
A.62 barrel 60 cm for - 350 x 200
Each 1394
63
A.63 barrel 60 cm for - 350 x 250
Each 1644
64
A.64 barrel 60 cm for - 350 x 300
Each 1895
65
A.65 barrel 60 cm for - 350 x 350
Each 2145
BMW-
66
A.66
Supply of SWG Plugs conforming to IS standards for 100 mm dia Each 26
BMW-
67
A.67
BMW-
68
A.68
BMW-
69
A.69
BMW-
70
A.70
BMW-
71
A.71
Supplying & fixing 150 mm x 100 mm SWG gully trapsconforming to ISI 651 & 4127
BMW-
72
A.72
with C.I Grating & Cost. Brick masonry in CM 1:6 prop. Intermediate chamber and Each 429
fitted with304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover
BMW- Supply of SWG Gully Traps (Round & Square) conforming to IS standards 150 x
73
A.73 100 mm
Each 179
BMW- Labour charges for fixing and laying the SWG Junctions/ Plugs/ Bends of any dia
74
A.74 with airtight cement joints as per standard practice
Each 26
BMW-
75
A.75
Supply of SWG Saddles conforming to IS standards 150 x 100 mm 146
BMW-
76
A.76
BMW-
77
A.77
B MAN HOLES & INSPECTION CHAMBERS -AS PER - IS 4111 : Part 1 : 1986
Page # 64
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS -
4111: Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm
thick from approved source having a minimum crushing strength of 10
N/sq.mmincluding plastering with cement mortar 1:3 prop; ½” thick both inside and
outside fitted with 20” dia RCC manhole covers and frames including excavating
BMW- pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying
78
B.01 cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4
Each 4588
benching and channel 100 mm thick as per Standard specification andincluding
cost and conveyance of all materials like cement, sand, bricks, water etc., to site,
cost of seigniorage charges on all materials and all incidental andoperational,
labour charges like mixing cement mortar, constructing masonry, lift charges, curing
etc., complete for finished item of work as per Standard specification.
Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS -
4111: Part-1:1986 with cement mortar (1:6) prop usingfly-ash blocks of 225 mm
thick from approved source having a minimum crushing strength of 10
79
Each 7167
Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS -

4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225
mm thick from approved source having a minimum crushing strength of 5
80
Each 4251
Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS -

4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225
mm thick from approved source having a minimum crushing strength of 5
81
Each 6515
Constructing 914.4 mm x 457.2 mm (3'0"x1'6") brick in CM 1:6 prop. Masonry
BMW-
82
B.05
Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 914.4 mm x Each 4378
457.2 mm (3'0"x1'6") C.I frame andcover of 40 Kg.
Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry.
BMW-
83
B.06
Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x Each 2639
457.2 mm (1'6"x1'6") C.I frame andcover of 20 Kg.
BMW-
84
B.07
a)Making drainage connection in the existing inspection including all repairs Each 91
BMW-
85
B.08
b) - do - labour charges only Each 65
C.I. PIPES & FITTINGS -AS PER - IS 1729:1979 (Materials shall be procured
C
from the list of approved Brands/ Manufacturers/ Suppliers)
Page # 65
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Supplying and fixing of C.I. Single/ Double Socket soil pipes ISI marked conforming
to IS:1729-1979 of reputed make with cement caulked joints and fixing as per site
requirements including painting black with Japan paint and fixing with necessary
wooden blocks fixed in the masonry walls in cement mortar (1½:1) and including
fixing of M.S. clamps if necessary with required no. of Bombay nails etc., complete
BMW-
86
C.01
3" dia (76.2 mm) Single Socket 1 RM 440
BMW-
87
C.02
4" dia (101.6mm) Single Socket 1 RM 526
BMW-
88
C.03
6" dia (152.4mm) Single Socket 1 RM 1043
BMW-
89
C.04
3" dia (76.2 mm) Double Socket 1 RM 497
BMW-
90
C.05
4" dia (101.6mm) Double Socket 1 RM 590
BMW-
91
C.06
6" dia (152.4mm) Double Socket 1 RM 1109
Labour charges only forfixing of C.I. Single/ Double Socket soil pipes of any dia with
cement caulked joints and fixing as per site requirements including painting black
BMW-
92
C.07
with Japan paint and fixing with necessary wooden blocks fixed in the masonry 1 RM 192
walls in cement mortar and including fixing of M.S. clamps if necessary with
required nails
Supplying & fixing CI Plain bends Ist quality ISI marked conforming to IS:1729-1979
BMW-
93
C.08
with cement caulked joints and fixing as per site requirements with standard Each 145
practice for3" dia (76.2 mm)
BMW-
94
C.09
BMW-
95
C.10
Supplying & fixing CI Plug (Door) bends Ist quality ISI marked conforming to
BMW-
96
C.11
IS:1729-1979 with cement caulked joints and fixing as per site requirements with Each 213
standard practice for 3" dia (76.2 mm)
BMW-
97
C.12
BMW-
98
C.13
BMW- Labour charges only for fixing CI Plain/ Plug (Door) bends with cement caulked
99
C.14 joints and fixing as per site requirements with standard practice
Each 61
BMW- Supplying and fixing of 76.2 mm (3") CI soil single junction with plug : conforming to
100
C.15 IS:1729-1979 with cement caulked joints and fixing
Each 287
BMW- Supplying and fixing of 101.6 mm (4") CI soil single junction with plug : conforming
101
C.16 to IS:1729-1979 with cement caulked joints and fixing
Each 416
BMW- Supplying and fixing of 152.4 mm (6") CI soil single junction with plug : conforming
102
Each 1065
BMW- Supplying and fixing of 76.2 mm (3") CI soil plain single junction : conforming to
103
Each 237
104
Each 351
105
Each 942
BMW- Labour charges only fixing CI soil single junctions with cement caulked joints and
106
C.21 fixing as per site requirements with standard practice
Each 83
BMW- Supplying and Fixing of 76.2 mm (3") CI soil Double junction with plug : conforming
107
Each 489
BMW- Supplying and Fixing of 101.6 mm (4") CI soil Double junction with plug :
108
C.23 conforming to IS:1729-1979 with cement caulked joints and fixing
Each 577
BMW- Supplying and Fixing of 152.4 mm (6") CI soil Double junction with plug :
109
C.24 conforming to IS:1729-1979 with cement caulked joints and fixing
Each 1521
Page # 66
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW- Supplying and Fixing of 76.2 mm (3") CI soil plain Double junction : conforming to
110
Each 418
111
Each 531
112
Each 1421
BMW- Labour charges only fixing CI soil Double junctions with cement caulked joints and
113
C.28 fixing as per site requirements with standard practice
Each 77
BMW- Supplying and Fixing of 75mm C.I. Offsets Ist quality conforming to IS:1729-1979
114
C.29 with cement caulked joints and fixing-for 76.20 mm (3") C.I. Pipe
Each 203
115
Each 298
116
Each 689
BMW- Supplying and Fixing of 115 mm C.I. Offsets Ist quality conforming to IS:1729-1979
117
C.32 with cement caulked joints and fixingfor 76.20 mm (3") C.I. Pipe
Each 248
118
Each 342
119
Each 706
120
C.35 with cement caulked joints and fixingfor 76.20 mm (3") C.I. Pipe
Each 293
121
C.36 with cement caulked joints and fixingfor 101.6 mm (4") C.I. Pipe
Each 389
122
C.37 with cement caulked joints and fixing for 152.4 mm (6") C.I. Pipe
Each 722
BMW- Labour charges only fixing CI soil Offsets with cement caulked joints and fixing as
123
C.38 per site requirements with standard practice
Each 39
Supplying & fixing CI floor traps 1st quality ISI marked conforming to IS:1729-1979
BMW- with C.P. Grating fixing with white cement as per site requirements with standard
124
C.39 practicefor nominal dia 75 mm (3") and grating size 165 mm dia of weight not less
Each 281
than 5.5 Kgs
Supplying & fixing CI floor traps 1st quality ISI marked with C.P. Grating fixing with
BMW-
125
C.40
white cement as per site requirements with standard practicefornominal dia 100 mm Each 343
(4") and grating size 100 mm dia of weight not less than 6 Kgs
Supplying & fixing CI floor traps 1st quality ISI marked conforming to IS:1729-1979
BMW- with C.P. Grating fixing with white cement as per site requirements with standard
126
C.41 practicefor nominal dia 75 mm (3") and grating size 100 mm dia of weight not less
Each 219
than 4.0 Kgs
BMW- Labour charges only for fixing CI Nahany/ Floor traps with C.P. Grating fixing with
127
C.42 white cement as per site requirements with standard practice
Each 50
BMW-
128
C.43
Boxing of Nahany traps in RCC floors Each 138
BMW-
129
C.44
Boxing of W.C Trap in R.C.C floors Each 276
Supplying & fixing CI Collars (double socket) Ist quality ISI marked conforming to
BMW-
130
C.45
standard practice for 76.20 mm (3") C.I. Pipe
BMW-
131
C.46
BMW-
132
C.47
VITREOUS CHINAWARE - SANITARY APPLIANCES as per IS:2556 – 1974
D (Materials shall be procured from the list of approved Brands/ Manufacturers/
Suppliers)
BMW- Supplying & Fixing Indian pattern white glazed W.C 1st quality ISI marked
133
D.01 conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 580 mm Long
Each 536
BMW- Supplying & Fixing Indian pattern white glazed W.C 1st quality ISI marked
134
D.02 conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 630 mm Long
Each 536
BMW-
135
D.03
Labour charges only for fixing Indian patternW.C with"P" or "S" trap Each 256
Page # 67
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW- Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming
136
D.04 to IS:2556-Part-3-1981 with"P" or "S" trap: 580 mm x 440 mm
Each 712
BMW- Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming
137
D.05 to IS:2556-Part-3-1981 with"P" or "S" trap: 630 mm x 450 mm
Each 804
BMW-
138
D.06
Labour charges only Fixing Orissa pan W.C with"P" or "S" trap Each 320
Supplying & Fixing porcelain foot rest for squatting I.W.C. (Rectangular pair) of
BMW-
139
D.07
sizes 250 mm x 125 mm x 15 mm thick each foot rest 1st quality ISI marked Pair 184
conforming to IS:2556-Part-10:1974
BMW- Labour charges only for fixing porcelain foot rest for squatting I.W.C. (Rectangular
140
D.08 pair)
Pair 58
BMW- Providing Brick masonry seat for Orissa pan/ Indian W.C. using 2nd class bricks as
141
D.09 per standard practice
Each 236
BMW- Providing Cement Concrete Squatting plate for Orissa pan/ Indian W.C. in P.C.C.
142
D.10 1:2:4 as per standard practice
Each 71
BMW- Supplying & Fixing low down porcelain flushing tank 10 Lit Capacitywith internal
143
D.11 components
Each 1448
BMW- Labour charges only for fixing low down porcelain flushing tank with internal
144
D.12 components
Each 448
BMW- Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-
145
D.13 Part-2-1973 ofwhite glazedwith 'P' trap
Each 1232
BMW- Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-
146
D.14 Part-2-1973 ofwhite glazedwith 'S' trap
Each 1155
BMW- Labour charges only for fixing European Water Closet with 'P' or 'S' trap as per
147
D.15 standard practice
Each 224
BMW- Supplying and Fixingbest Indian make plastic seat and lid for European water
148
D.16 closets with rubber or plastic Buffers as per IS 2548-1996
Each 310
BMW-
149
D.17
Labour charges only for fixing plastic seat and lid for European water closet Each 65
Supply, Installation and commissioning approved make floor mounted Close
coupled EWC suit CASCADE model 'P' or 'S' trap with dual flush porcelain cistern
BMW- fixed on EWC with all internal parts of dual flush cistern, ultra solid seat cover of
150
D.18 approvedmake with rubber buffer and cap 15 mm angle stop cock 450 mm long
Each 6720
PVC inter connection pipe wall flanges all of approved make etc. complete for
finished item of work in all respects:White Colour
Supply, Installation and commissioning approved make floor mounted Close
151
Each 9947
finished item of work in all respects: Coloured - Grade - I/ Grade - II
Supply, Installation and commissioning approved make floor mounted close

152
Each 12744
finished item of work in all respects: Special Colour - Grade - III
Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming
to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal
BMW- size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with
153
D.21 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400
Each 1611
grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets
including wooden block: 660 x 460 mm - Single C.P. Pillar cock
154
Each 1395
Page # 68
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
155
Each 1772
including wooden block: 630 x 450 mm - Double C.P. Pillar cock
156
Each 965
157
Each 1234
158
Each 900
159
Each 1127
Labour charges only for fixing Indian makeFlat Back Wash Hand Basin with waste
BMW-
160
D.28
fittings like rubber plug, chain,32 mm nominal size C.P. Fitting Pillar Taps complete Each 320
with standard CI brackets including wooden block
BMW-
161
D.29
Supplying and Fixing Pedestal for Wash Hand Basin(H.S.W / Parry / Earthenware) Each 773
BMW-
162
D.30
Labour charges only for fixing pedestal for wash hand basin Each 116
BMW-
163
D.31
Supplying & Fixing 31.75 mm C.P bottle trap (Heavy type) Parryware or equivalent Each 306
BMW-
164
D.32
Labour charges only for fixing bottle trap to the wash hand basin Each 45
Supplying & Fixing white glazed flat back Bowl urinals of size 440 mm x 265 mm x
BMW-
165
D.33
315 mm with internal flushing rim fixed with screws complete Indian make Each 373
conforming to IS:2556-1995
Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to
BMW- IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm
166
D.34 conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make :
Each 1864
410 x 265 x 305 mm
Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to
BMW- IS:2556-1995 with standard C.P. Spreader of overall size 95 x 95 x 57 mm
167
D.35 conforming to IS:2556-Part6, Sec-6-1974 fixed with screws complete Indian make :
Each 1879
590 x 375 x 390 mm
BMW- Labour charges only Fixing flat back Bowl/ Half stall urinals with fixing C.P.
168
D.36 Spreader and screws complete
Each 128
Supplying & Fixing Indian make white glazed vitreous china porcelain sink
BMW- conforming to IS:2556-Part-5-1994 on cantilever brackets with waste fittings like
169
D.37 rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread
Each 3170
conforming to IS:2963-1979 : 600 x 400 x 250
Page # 69
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
Supplying & Fixing Indian make white glazed vitreous china porcelain sink
BMW- conforming to IS:2556-Part-5-1994 on cantilever brackets with waste fittings like
170
D.38 rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread
Each 3600
conforming to IS:2963-1979 : 750 x 450 x 250
BMW- Labour charges only for fixing Vitreous china porcelain sinks with waste fittings,
171
D.39 rubber plug, chain, cantilever brackets etc.
Each 272
BMW- a) S & F 609.6 x 457.2 x 254 mmRCC terrazzo finished sink(or constructed at site
172
D.40 with 50.8mm thick) brass plug and chain including CI cantilever brackets
Each 375
BMW-
173
D.41
TAPS & FAUCETS(Materials shall be procured from the list of approved
E
Brands/ Manufacturers/ Suppliers)
BMW-
174
E.01
a) S & F 12.7 mm NP stop cock Indian makeheavy duty Each 355
BMW-
175
E.02
BMW-
176
E.03
a) S & Fconcealed stop cock 12.7 mm (1/2") Indian Make heavy duty Each 397
BMW-
177
E.04
BMW-
178
E.05
a) S & Fangle stop cock 12.7 mm diafirst quality Indian Make heavy duty Each 344
BMW-
179
E.06
BMW-
180
E.07
a) S&F 12.7 mm N.P bib tap Indian make heavy dutys Each 301
BMW-
181
E.08
BMW-
182
E.09
a) S&F 12.7mm N.P bib tap Indian make 3heavy duty Each 183
BMW-
183
E.10
BMW-
184
E.11
a)S & F 31.75 mm brass plumber Union best Indian first quality Each 43
BMW-
185
E.12
BMW-
186
E.13
a) S & F 12.7 mm brass stop cock Indian make heavy duty Each 162
BMW-
187
E.14
BMW-
188
E.15
a) S & F 12.7 mm brass stop cock Indian make heavy duty Each 139
BMW-
189
E.16
BMW-
190
E.17
a) S & F 12.7 mm brass bib cock Indian make heavy duty Each 162
BMW-
191
E.18
BMW-
192
E.19
a) S & F 12.7 mm brass bib cock Indian make heavy duty Each 139
BMW-
193
E.20
BMW- S & F CP Long body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian
194
E.21 make
Each 468
BMW- S & F CP Short body bib cock fancy type deluxeheavy duty 12.7 mm dia Indian
195
E.22 make
Each 446
BMW-
196
E.23
S & F 12.7mm heavy duty dia high neck pillar cock 1st quality Indian make Each 887
BMW-
197
E.24
a)S & F 12.7 mm heavy duty NP Swan Neck Pillar cock Each 887
BMW-
198
E.25
Page # 70
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW-
199
E.26
a)S & F 12.7 mm heavy duty NP Sink cock Each 898
BMW-
200
E.27
BMW-
201
E.28
S&F 12.7 mm dia NP pillar cock heavy duty Ist quality Indian make Each 463
BMW-
202
E.29
S&F 12.7 mm dia NP push cock Ist quality Each 193
BMW-
203
E.30
S&F 12.7 mm dia NP lift cock Ist quality Each 166
BMW- a)S & F 38.1 mm C.Pwaste coupling Half or Full Thread 1st Quality Indian make
204
E.31 Parryware or equivalent
Each 166
BMW-
205
E.32
BMW-
206
E.33
a) S & F 31.75 mm PVC bottle trap Each 91
BMW-
207
E.34
BMW-
208
E.35
a)S& F 38.1 mm brass plumber union Each 43
BMW-
209
E.36
BMW-
210
E.37
a)S & F 19.05 mm heavy duty NP stop cock Indian make with ISI mark Each 463
BMW-
211
E.38
G.I. PIPES & FITTINGS(Materials shall be procured from the list of approved
F
212 BMW-F.01 S& F GIunion 12.7 mm Ist Quality Each 32
218 BMW-F.07 S& F GI connector 25.4 mm dia Each 65
219 BMW-F.08 S& F 12.7 mm GI 'T' A class Ist quality Each 40
220 BMW-F.09 S& F31.75mm dia GI bend Ist quality Each 60
221 BMW-F.10 S & F 31.75 mm dia GI 'T' 1st Quality Each 59
222 BMW-F.11 a) S & F 25.4 mm copper ball cock ith PVC ball Indian make ISI mark Each 304
223 BMW-F.12 b) - do - labour charges only Each 40
224 BMW-F.13 a) S & F 19.05 mm copper ball cock ith PVCball Indian make ISI mark Each 98
226 BMW-F.15 a)S & F 12.7 mm copper ball cock ith PVC ball Indian make ISI mark Each 145

a)S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make
228 BMW-F.17
heavy type - 25 mm NB Size
Each 560
Page # 71
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes

230 BMW-F.19
Each 369

232 BMW-F.21
Each 264

234 BMW-F.23
Each 854

236 BMW-F.25
Each 1158

238 BMW-F.27
Each 1678

240 BMW-F.29
Each 3247

242 BMW-F.31
Each 4615

a) Supplying & fixing Gunmetal (GM) Horizontal Check (Non return) Valve as per IS-
244 BMW-F.33
778 I-class heavy duty - 15 mm NB Size
Each 218

246 BMW-F.35
Each 505

248 BMW-F.37
Each 1136

250 BMW-F.39
Each 1670

252 BMW-F.41
Each 319

a) Supplying & fixing Gunmetal (GM) Vertical Check (Non return) Valve as per IS-
254 BMW-F.43
Each 157

256 BMW-F.45
Each 224

258 BMW-F.47
Each 310
Page # 72
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
260 BMW-F.49
Each 483

262 BMW-F.51
Each 748

264 BMW-F.53
Each 1101

a)S & F Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I,
266 BMW-F.55
Indian make heavy type - 15 mm NB Size
Each 267

268 BMW-F.57
Each 361

270 BMW-F.59
Each 550

272 BMW-F.61
Each 1032

274 BMW-F.63
Each 1571

276 BMW-F.65
Each 2779

a) S& F 15 mm Nominal Bore GI pipe Light Grade properties & weight as per IS
278 BMW-F.67 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour 1 RM 101
charges complete
279 BMW-F.68 b) - do - labour charges only 1 RM 37
280 BMW-F.69 1239ISI mark with GI fittings including the cost of pipe & its fittings & labour charges 1 RM 121
complete
charges complete
complete
charges complete
Page # 73
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
charges complete
a) S& F 15 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS
charges complete
complete
complete
complete
charges complete
charges complete
S & F 65 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS
1239 with GI fittings such as elbows tees couplings, nipples, plugs including
302 BMW-F.91 excavation for trenches and refilling the trenches complete except for GI bends 1 RM 644
union and GI connectors with checkout and socket Tata or Zenith make or
equivalent.
303 BMW-F.92 a)S & F 12.7 mm holder bat clamps Each 3

BMW-
311
F.100
a) S& F12.7x 152.0 mm NP shower rose heavy Each 133
BMW-
312
F.101
BMW-
313
F.102
Page # 74
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW-
314
F.103
BMW-
315
F.104
BMW-
316
F.105
BMW-
317
F.106
a) S & F 12.7 x 88.9 CP fancy shower Each 224
BMW-
318
F.107
BMW- a) Supplying & fixing 12.7 mm GI drain pipe with plug for tanks (Mud valve)
319
F.108 including making a hole
Each 17
BMW-
320
F.109
321
Each 33
BMW-
322
F.111
323
Each 40
BMW-
324
F.113
BMW- a) Taking branch water connection from the existing 25.4 mm GIpipe including
325
F.114 cutting threading, etc, complete with fitting
Each 82
BMW-
326
F.115
327
F.116 cutting threading, etc, complete with fitting,
Each 37
BMW-
328
F.117
329
F.118 cutting threading, etc, complete with fitting,
Each 26
BMW-
330
F.119
BMW-
331
F.120
Supplying & fixing leather washers for 12.7 mm bib tap and stop cock Each 1
BMW-
332
F.121
Supplying & fixing leather washers for 19.05 mm bib tap and stop cock Each 3
BMW-
333
F.122
Supplying & Fixing 12.7 mm fibre washers Each 3
BMW-
334
F.123
Supplying & Fixing 19.05 mm fibre washers Each 3
PVC PIPES & FITTINGS(Materials shall be procured from the list of approved
G
a) Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank
BMW- with Double layer approved brand & manufacture with cover and suitable locking
335
G.01 arrangement & making necessary holes for inlet & outlets and over flow pipes but
1 Lit 4
without fittings & base support for tanks
BMW-
336
G.02
b) - do - labour charges only 1 Lit 1
BMW-
337
G.03
Supply of Plastic storage tank lid with hinges Each 65
BMW-
338
G.04
Supply & Fixing 76.2 mm dia PVC elbow Ist quality Each 35.97
BMW- Supply & fixing 31.75mm dia PVC flexible waste pipe of 914.4 mm length of Ist
339
G.05 quality
Each 19.90
BMW-
340
G.06
Supply & Fixing 38.1 mm dia PVC solid waste pipe outlet Each 68.11
BMW-
341
G.07
Supply & fixing Fancy PVC shelf including all fittings Each 162.24
BMW- Supply & fixing of PVC low level systemwith internal components & short bend:10
342
G.08 Litres capacity Single Flush
Each 1113.52
Page # 75
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
343
G.09 litres capacity Dual Flush
Each 1307.14
344
G.10 Litres capacity single Flush
Each 629.85
BMW-
345
G.11
75 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm Each 217
BMW-
346
G.12
90 mm dia 3 M single Socket PVC/SWR pipe - 4 Kg/sq.cm Each 344
BMW-
347
G.13
BMW-
348
G.14
75 mm dia 3 MDouble Socket PVC/SWR pipe - 4 Kg/sq.cm Each 245
BMW-
349
G.15
BMW-
350
G.16
BMW-
351
G.17
75 mm dia 1828.8 mm (6'-0") Single Socket PVC/SWR pipe - 4 Kg/sq.cm Each 152
BMW-
352
G.18
BMW-
353
G.19
BMW-
354
G.20
75 mm dia 1828.8 mm (6'-0") Double Socket PVC/SWR pipe - 4 Kg/sq.cm Each 162
BMW-
355
G.21
BMW-
356
G.22
BMW-
357
G.23
75 mm dia 1219. mm (4'-0") Double Socket PVC/SWR pipe - 4 Kg/sq.cm Each 112
BMW-
358
G.24
BMW-
359
G.25
BMW-
360
G.26
75 mm dia 914.4mm (3'-0") Double Socket PVC/SWR pipe - 4 Kg/sq.cm Each 94
BMW-
361
G.27
BMW-
362
G.28
BMW-
363
G.29
BMW-
364
G.30
BMW-
365
G.31
BMW-
366
G.32
160 MM dia 3 M Double Socket PVC/SWR pipe - 4 Kg/sq.cm Each 980
BMW-
367
G.33
BMW-
368
G.34
90 mm dia 3 M single Socket PVC/SWR pipe - 6 Kg/sq.cm Each 592
BMW-
369
G.35
BMW-
370
G.36
BMW-
371
G.37
BMW-
372
G.38
BMW-
373
G.39
Page # 76
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW-
374
G.40
BMW-
375
G.41
BMW-
376
G.42
BMW-
377
G.43
BMW-
378
G.44
BMW-
379
G.45
BMW-
380
G.46
BMW-
381
G.47
BMW-
382
G.48
BMW-
383
G.49
BMW-
384
G.50
BMW-
385
G.51
BMW-
386
G.52
BMW-
387
G.53
BMW-
388
G.54
160 mm dia 3 M Double Socket PVC/SWR pipe - 6 Kg/sq.cm Each 1603
BMW-
389
G.55
75 mm dia - Plain Bend 87.5 Degree - UPVC/SWR Pipe fittings Each 43
BMW-
390
G.56
BMW-
391
G.57
BMW-
392
G.58
75 mm dia - Door Bend 87.5 Degree - UPVC/SWR Pipe fittings Each 57
BMW-
393
G.59
BMW-
394
G.60
BMW-
395
G.61
75 mm dia - 45 Degree Bend - UPVC/SWR Pipe fittings Each 33
BMW-
396
G.62
BMW-
397
G.63
BMW-
398
G.64
75 mm dia - Cleaning Pipe - UPVC/SWR Pipe fittings Each 57
BMW-
399
G.65
BMW-
400
G.66
BMW-
401
G.67
75 mm dia - Single Tee - UPVC/SWR Pipe fittings Each 50
BMW-
402
G.68
BMW-
403
G.69
BMW-
404
G.70
75 mm dia - Single Tee with Door - UPVC/SWR Pipe fittings Each 62
Page # 77
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW-
405
G.71
BMW-
406
G.72
BMW-
407
G.73
75 mm dia - Double Tee - UPVC/SWR Pipe fittings Each 106
BMW-
408
G.74
BMW-
409
G.75
BMW-
410
G.76
75 mm dia - Double Tee with Door - UPVC/SWR Pipe fittings Each 170
BMW-
411
G.77
BMW-
412
G.78
BMW-
413
G.79
75 mm dia - Single 'Y' - UPVC/SWR Pipe fittings Each 63
BMW-
414
G.80
BMW-
415
G.81
BMW-
416
G.82
75 mm dia - Single 'Y' with Door - UPVC/SWR Pipe fittings Each 81
BMW-
417
G.83
BMW-
418
G.84
BMW-
419
G.85
75 mm dia - Double 'Y' - UPVC/SWR Pipe fittings Each 87
BMW-
420
G.86
BMW-
421
G.87
BMW-
422
G.88
75 mm dia - Double 'Y' with Door - UPVC/SWR Pipe fittings Each 112
BMW-
423
G.89
BMW-
424
G.90
BMW-
425
G.91
75 mm dia - Coupler - UPVC/SWR Pipe fittings Each 30
BMW-
426
G.92
BMW-
427
G.93
BMW-
428
G.94
90 x 75 mm dia - Reducer - UPVC/SWR Pipe fittings Each 50
BMW-
429
G.95
110 x 75 mm dia - Reducer - UPVC/SWR Pipe fittings Each 48
BMW-
430
G.96
90 x 110mm dia - Reducer - UPVC/SWR Pipe fittings Each 67
BMW-
431
G.97
63 mm dia - Vent Cowl - UPVC/SWR Pipe fittings Each 8
BMW-
432
G.98
BMW-
433
G.99
BMW-
434
G.100
BMW- 40 mm dia - Pipe Clip - UPVC/SWR Pipe fittings - Pipe Clip - UPVC/SWR Pipe
435
G.101 fittings
Each 9
Page # 78
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW-
436
G.102
50 mm dia - Pipe Clip - UPVC/SWR Pipe fittings Each 12
BMW-
437
G.103
BMW-
438
G.104
BMW-
439
G.105
BMW-
440
G.106
110 mm - Pipe Clip - UPVC/SWR Pipe fittings Each 15
BMW-
441
G.107
BMW-
442
G.108
P' Trap ( Small without Air vent ) 110 mm - UPVC/SWR Pipe fittings Each 160
BMW-
443
G.109
P' Trap ( Small with Air vent ) 110 mm - UPVC/SWR Pipe fittings Each 177
BMW-
444
G.110
P' Trap (Big with Air vent ) 110 mm - UPVC/SWR Pipe fittings Each 202
BMW-
445
G.111
P' Trap ( Big without Air vent ) 110 mm - UPVC/SWR Pipe fittings Each 186
BMW-
446
G.112
Floor Trap (Bell Mouth ) 110 mm - UPVC/SWR Pipe fittings Each 193
BMW-
447
G.113
Bell Mouth Trap 7 " ( 177.8 mm) - UPVC/SWR Pipe fittings Each 281
BMW-
448
G.114
4" (101.6 mm ) Nahany Trap ( Without Jali with inlet)UPVC/SWR Pipe fittings Each 95
BMW-
449
G.115
3" (76.2 mm ) Nahany Trap ( without Jali without inlet)UPVC/SWR Pipe fittings Each 74
BMW-
450
G.116
4" (101.6 mm ) Nahany Trap ( without inlet with out Jali)UPVC/SWR Pipe fittings Each 92
BMW-
451
G.117
Mini Trap - UPVC/SWR Pipe fittings Each 45
BMW-
452
G.118
3" (76.2 mm ) Nahany Trap with Jali - UPVC/SWR Pipe fittings Each 87
BMW-
453
G.119
4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings Each 122
BMW-
454
G.120
4" (101.6) multi floor trap with out Jalli- UPVC/SWR Pipe fittings Each 95
BMW-
455
G.121
Round Jali - UPVC/SWR Pipe fittings Each 20
BMW-
456
G.122
Square tile & Jalli - UPVC/SWR Pipe fittings Each 33
BMW-
457
G.123
Pipe connector( with LIP ring) - UPVC/SWR Pipe fittings Each 128
BMW-
458
G.124
Pipe connector( with out LIP ring) - UPVC/SWR Pipe fittings Each 99
BMW-
459
G.125
4" (101.6 mm ) Floor Trap - UPVC/SWR Pipe fittings Each 117
BMW-
460
G.126
5" (127.mm ) floor Trap - UPVC/SWR Pipe fittings Each 124
BMW-
461
G.127
75 mm dia - Door cap - UPVC/SWR Pipe fittings Each 48
BMW-
462
G.128
BMW-
463
G.129
BMW-
464
G.130
75 mm dia - Socket plug - UPVC/SWR Pipe fittings Each 45
BMW-
465
G.131
BMW-
466
G.132
Page # 79
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW-
467
G.133
75 mm dia - Rubber ring for Socket - UPVC/SWR Pipe fittings Each 7
BMW-
468
G.134
BMW-
469
G.135
BMW-
470
G.136
75 mm dia - Door Socket - UPVC/SWR Pipe fittings Each 8
BMW-
471
G.137
BMW-
472
G.138
BMW-
473
G.139
LIP ring 110 mm - UPVC/SWR Pipe fittings Each 59
BMW-
474
G.140
Rubber Lubricant - 100 Grams Each 25
BMW-
475
G.141
Rubber Lubricant- 250Grams Each 55
BMW-
476
G.142
BMW-
477
G.143
BMW-
478
G.144
P' Trap with lip UPVC/SWR Pipe fittings Each 253
BMW-
479
G.145
50 ml - Solvent Cement Each 13
BMW-
480
G.146
BMW-
481
G.147
BMW-
482
G.148
BMW-
483
G.149
BMW-
484
G.150
110mm x 90 mm - Internal Reducer - UPVC/SWR Pipe fittings Each 77
BMW-
485
G.151
160 mm x 110 mm - Internal Reducer - UPVC/SWR Pipe fittings Each 190
Labour charges for laying, fixing and commissioning the PVC pipes including
BMW-
486
G.152
couplers/ bends/ tees etc any diameter including fixing necessary fittings like bends, 1 RM 65
plugs, couplers, junctions, tees, etc with solvent jointing as per standard practice
H CENTRIFUGAL CAST IRON PIPES & FITTNGS AS PER IS: 3989 - 1984
BMW-
487
H.01
75 mm dia CI (spun) soils Waste & Ventilating pipe (3 M) Each 1102
BMW-
488
H.02
BMW-
489
H.03
BMW-
490
H.04
75 mm dia CI (spun) soils Waste & Ventilating pipe (3 M) Double socket Each 1224
BMW-
491
H.05
100 mm dia CI (spun) soils Waste & Ventilating pipe (3 M) Double socket Each 1651
BMW-
492
H.06
75 mm dia 9'-0" (2743.2 mm) CI (Spun) pipes Each 991
BMW-
493
H.07
BMW-
494
H.08
BMW-
495
H.09
BMW-
496
H.10
Page # 80
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW-
497
H.11
BMW-
498
H.12
75 mm dia 6'-0" (1828.8 mm) Double Socket CI (Spun) pipes Each 759
BMW-
499
H.13
100 mm dia 6'-0" (1828.8 mm) Double Socket CI (Spun) pipes Each 941
BMW-
500
H.14
75 mm dia Cut pipes (pieces) 1 foot (304.8 mm) CI (Spun) fittings Each 263
BMW-
501
H.15
100 mm dia Cut pipes (pieces) 1 foot (304.8 mm) CI (Spun) fittings Each 302
BMW-
502
H.16
75 mm dia Cut pipes (pieces) 1'.6" (457.2 mm) CI (Spun) fittings Each 377
BMW-
503
H.17
BMW-
504
H.18
BMW-
505
H.19
75 mm diaCut pipes (pieces ) 2 feet (609.6 mm) CI (Spun) fittings Each 520
BMW-
506
H.20
BMW-
507
H.21
BMW-
508
H.22
BMW-
509
H.23
BMW-
510
H.24
75 mm dia Cut pipes (pieces ) 4 feet (1219.2 mm) CI (Spun) fittings Each 877
BMW-
511
H.25
100 mm dia Cut pipes (pieces ) 4 feet (1219.2 mm) CI (Spun) fittings Each 1312
BMW-
512
H.26
75 mm dia Plain Bend - CI (Spun) fittings Each 270
BMW-
513
H.27
BMW-
514
H.28
BMW-
515
H.29
75 mm dia Door Bend - CI (Spun) fittings Each 280
BMW-
516
H.30
BMW-
517
H.31
BMW-
518
H.32
75 mm dia Plain Bend 45 Degrees - CI (Spun) fittings Each 270
BMW-
519
H.33
BMW-
520
H.34
BMW-
521
H.35
75 mm dia Door Bend 45 Degrees - CI (Spun) fittings Each 280
BMW-
522
H.36
BMW-
523
H.37
BMW-
524
H.38
Horn Bend Plain 101.6 x 50.8 mm (4" x 2") 100 mm dia - CI (Spun) fittings Each 551
BMW-
525
H.39
Horn Bend door 101.6 x 50.8 mm (4" x 2") 100 mm dia - CI (Spun) fittings Each 643
BMW-
526
H.40
75 mm dia Heel Rest Bend - CI (Spun) fittings Each 288
BMW-
527
H.41
Page # 81
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW-
528
H.42
BMW-
529
H.43
75 mm dia Single Branch Plain "T" - CI (Spun) fittings Each 363
BMW-
530
H.44
BMW-
531
H.45
BMW-
532
H.46
75 mm dia Single Branch Door "T" - CI (Spun) fittings Each 428
BMW-
533
H.47
BMW-
534
H.48
BMW-
535
H.49
75 mm dia Single Branch plain "Y" - CI (Spun) fittings Each 428
BMW-
536
H.50
BMW-
537
H.51
BMW-
538
H.52
75 mm dia Single Branch Door "Y" - CI (Spun) fittings Each 469
BMW-
539
H.53
BMW-
540
H.54
BMW-
541
H.55
75 mm dia Double Branch Plain "T" - CI (Spun) fittings Each 496
BMW-
542
H.56
100 mm dia Double Branch Plain "T" - CI (Spun) fittings Each 668
BMW-
543
H.57
75 mm dia Double Branch Door "T" - CI (Spun) fittings Each 553
BMW-
544
H.58
100 mm dia Double Branch Door "T" - CI (Spun) fittings Each 696
BMW-
545
H.59
75 mm dia Double Branch Plain "Y" - CI (Spun) fittings Each 553
BMW-
546
H.60
100 mm dia Double Branch Plain "Y" - CI (Spun) fittings Each 696
BMW-
547
H.61
75 mm dia Double Branch Door "Y" - CI (Spun) fittings Each 582
BMW-
548
H.62
100 mm dia Double Branch Door "Y" - CI (Spun) fittings Each 755
BMW-
549
H.63
75 mm dia Shoe Bend - CI (Spun) fittings Each 342
BMW-
550
H.64
BMW-
551
H.65
BMW-
552
H.66
75 mm dia Collar - CI (Spun) fittings Each 234
BMW-
553
H.67
BMW-
554
H.68
BMW-
555
H.69
75 mm dia Cowl - CI (Spun) fittings Each 207
BMW-
556
H.70
BMW-
557
H.71
BMW-
558
H.72
75 mm dia Offset 3" (76.2 mm ) projection - CI (Spun) fittings Each 299
Page # 82
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW-
559
H.73
BMW-
560
H.74
BMW-
561
H.75
75 mm dia Offset 6" (152.4mm ) projection - CI (Spun) fittings Each 327
BMW-
562
H.76
BMW-
563
H.77
BMW-
564
H.78
75 mm diaLong Door Bend - CI (Spun) fittings Each 688
BMW-
565
H.79
100 mm diaLong Door Bend - CI (Spun) fittings Each 740
BMW-
566
H.80
75 mm dia Hand Hole pipe ( Inspection pipe) Each 395
BMW-
567
H.81
BMW-
568
H.82
BMW-
569
H.83
75 mm dia P Traps - CI (Spun) fittings Each 428
BMW-
570
H.84
100 mm dia P Traps - CI (Spun) fittings Each 587
BMW-
571
H.85
4" x 3" (101.6 mm x 76.2mm ) P. Traps 100 mm dia - CI (Spun) fittings Each 673
BMW-
572
H.86
4" x 3" (101.6 mm x 76.2mm ) Vent Traps 100 mm dia - CI (Spun) fittings Each 673
BMW-
573
H.87
4" x 3" (101.6 mm x 76.2mm ) Reducer 75 mm dia - CI (Spun) fittings Each 418
BMW-
574
H.88
6" x 4" (152.4 mm x101.6 mm ) Reducer 75 mm dia - CI (Spun) fittings Each 571
BMW-
575
H.89
3" x 2" ( 76.2 mm x 50.8 mm ) plain T 75 mm dia - CI (Spun) fittings Each 357
BMW-
576
H.90
3" x 2" ( 76.2 mm x 50.8 mm ) Door T 75 mm dia - CI (Spun) fittings Each 557
BMW-
577
H.91
3" x 2" ( 76.2 mm x 50.8 mm ) Plain Y 75 mm dia - CI (Spun) fittings Each 557
BMW-
578
H.92
3" x 2" ( 76.2 mm x 50.8 mm ) Door Y 75 mm dia - CI (Spun) fittings Each 557
BMW-
579
H.93
4" x 3" (101.6 mm x 76.2mm ) Plain T75 mm dia - CI (Spun) fittings Each 557
BMW-
580
H.94
4" x 3" (101.6 mm x 76.2mm ) Door T75 mm dia - CI (Spun) fittings Each 590
BMW-
581
H.95
4" x 3" (101.6 mm x 76.2mm ) Plain Y75 mm dia - CI (Spun) fittings Each 590
BMW-
582
H.96
4" x 3" (101.6 mm x 76.2mm ) DoorY75 mm dia - CI (Spun) fittings Each 630
BMW-
583
H.97
6" x 4" (152.4 mm x101.6 mm ) Plain T 75 mm dia - CI (Spun) fittings Each 825
BMW-
584
H.98
6" x 4" (152.4 mm x101.6 mm )Door T 75 mm dia - CI (Spun) fittings Each 894
BMW-
585
H.99
6" x 4" (152.4 mm x101.6 mm ) Plain Y 75 mm dia - CI (Spun) fittings Each 945
BMW-
586
H.100
6" x 4" (152.4 mm x101.6 mm )DoorY 75 mm dia - CI (Spun) fittings Each 1156
BMW-
587
H.101
75 mm diaPlain " T" 27 " (685.8 mm ) Special Types of Long Fittings Each 1197
BMW-
588
H.102
100 mm dia - Plain " T" 27 " (685.8 mm ) Special Types of Long CI (Spun) fittings Each 1681
BMW-
589
H.103
75 mm dia Door "T" 27" (685.8 mm )Special Types of Long CI (Spun) fittings Each 1337
Page # 83
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW-
590
H.104
100mm dia Door "T" 27" (685.8 mm )Special Types of Long CI (Spun) fittings Each 1848
BMW-
591
H.105
75 mm diaPlain " Y" 27" (685.8 mm) Special Types of Long CI (Spun) fittings Each 1337
BMW-
592
H.106
100mm diaPlain " Y" 27" (685.8 mm) Special Types of Long CI (Spun) fittings Each 1848
BMW-
593
H.107
75 mm dia Door " Y" 27" (685.8 mm)Special Types of Long CI (Spun) fittings Each 1491
BMW-
594
H.108
100mm dia Door " Y" 27" (685.8 mm)Special Types of Long CI (Spun) fittings Each 2028
I MISCELLANEOUS ITEMS
595 BMW-I.01 a) Supplying & Fixing solder joints up to 50.8 mm dia Each 48
596 BMW-I.02 b) - do - labour charges only Each 18
597 BMW-I.03 a) Supplying & Fixing solution joints up to 50.8 dia Ist quality. Each 9
Chiselling the stone masonry wall for fixing of wooden blocks including finishing as
599 BMW-I.05
directed by the department
Each 26
600 BMW-I.06 Chiselling the stone masonry wall and repairs as directed by the department. 1 Rm 124
601 BMW-I.07 Chiselling the brick masonry wall and repairs as directed by the department. 1 Rm 26
a) S & F NP telephonic shower spray set & valve mixer with rest and all fittings
602 BMW-I.08
complete (ARK/ESSCO or equivalent make)
Each 1409
604 BMW-I.10 a) S & F NP shower spray fancy with NP Flexible pipe Each 355
606 BMW-I.12 a) S & F NP cover for Nahany trap Each 10
608 BMW-I.14 a) Painting the flushing tank with white enamel paint Each 34
610 BMW-I.16 S & F internal fittings for flush tank Parryplast wonder flush or equivalent Each 521
611 BMW-I.17 Repairing and over hauling flushing tank Each 69
612 BMW-I.18 a) Supplying & Fixing NP chain rubber and plug for basin Each 27
a) S & F 25.4 mm dia& 609.6 mm long aluminium anodized towel rod with brackets
614 BMW-I.20
and aluminium screws
Each 96
a) S & F 19.04 mm dia& 609.6 mm long aluminium anodized towel rod with brackets
616 BMW-I.22
and aluminium screws
Each 61
a) S & F 609.6 mm long 127 mm wide plate glass shelf with superior quality
618 BMW-I.24
aluminium railing complete with aluminium screws
Each 122
620 BMW-I.26 a) S & F 609.6 mm long 127 mm wide plate glass shelf only Each 46
622 BMW-I.28 a) S & F NP soap dish heavy type with NP SCREWS Each 184
624 BMW-I.30 a) S &F NP holder brackets with screws Each 27
626 BMW-I.32 a) S & F liquid soap container NP metallic with NP brackets and screws. Each 176
628 BMW-I.34 a) S & F 31.75 mm C.P TRAPS Each 215
630 BMW-I.36 a) Supplying & fixing 88.9 mm A.C cowls Each 45
632 BMW-I.38 a)Supplying & fixing A.CCowl 63.5 mm dia Each 30
634 BMW-I.40 Removing and refixing W.C s Each 181
Page # 84
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
635 BMW-I.41 Removing and refixing wash hand basins of any size with fittings complete Each 162
636 BMW-I.42 a)S & F 76.2 x 101.6 mm teak wood block complete Each 14
638 BMW-I.44 Cutting holes in C.C; basement & repairs Labour charges only Each 91
639 BMW-I.45 Cutting holes in stone masonry& basement and repairs Labour charges only Each 61
640 BMW-I.46 Cutting holes in Brick masonry& repairs Labour charges only Each 40
641 BMW-I.47 Cutting holes in RCC slab floor & repairs Labour charges only Each 61
642 BMW-I.48 a)Supplying & Fixing 12.7 mm PVC connection with brass union nut C.P coated Each 65
644 BMW-I.50 a) S & F 12.7 mm .M.P couplings Each 20
646 BMW-I.52 a) S & F 19.05 mm M.P couplings Each 25
648 BMW-I.54 a) S& F MP coupling 25.4 mm dia Each 60
649 BMW-I.55 a) S & FPVC Rubber adopter for LLC and bend Each 18
651 BMW-I.57 a) S& F 31.75 mm Brass union nuts Each 0
653 BMW-I.59 a) S& F 38.1 mm Brass union nuts Each 0
a) Constructing Brick masonry chamber over the gully trap or peet valve and fitted
655 BMW-I.61
with 304.8 x 228.6 m size CI frame and hinged cover.
Each 284
a) Constructing Brick masonry support for G.I pipe with C.M 304.8 x 228.6 x228.6
657 BMW-I.63
mm size includingplastering and finishing etc. complete.
Each 41
659 BMW-I.65 a) Supplying & fixing 304.8 x 228.6 mm CI frame & cover over gully taps Each 67
661 BMW-I.67 a) Supplying & fixing CI Nahany trap grating Each 7
663 BMW-I.69 a) Supplying & fixing CI gully trap grating Each 30
665 BMW-I.71 a) Supplying & fixing valves for brass ball cocks 25.4 mm dia Each 9
667 BMW-I.73 a) Supplying & fixing 12.7 m valve for bib tap or stop cocks Each 9
669 BMW-I.75 a) Supplying & fixing 19.05 m valve for bib tap or stop cocks Each 22
671 BMW-I.77 Removing 12.7 mm GIpipe and refixing the same Mr. 48
674 BMW-I.80 Removing 38.1 mm GIpipe and refixing the same Rm 102
675 BMW-I.81 Removing 50.8 mm GIpipe and refixing the same Rm 119
676 BMW-I.82 Cleaning the W.C with acid and Vim powder Each 33
677 BMW-I.83 Cleaning the Urinal with acid and Vim power Each 33
678 BMW-I.84 Cleaning the wash basin with acid and Vim powder Each 33
679 BMW-I.85 Cleaning theE.W.C with acid and Vim power Each 33
Supplying & fixing 914.4 x 457.2 mm CI man hole frame and cover (light weight) 30
680 BMW-I.86
Kgs
Each 1539
681 BMW-I.87 Supplying & fixing 602 x 602 mm CI man hole frame and cover (light weight) 30 Kgs Each 2242
683 BMW-I.89 a) Supplying & fixing CI steps for septic tank. Each 41
Page # 85
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes

a) Supplying & fixing 50.8cm dia C.I. Man hole frame & cover for 914.4 mm dia
685 BMW-I.91
chamber (20 Kgs - Light weight)
Each 881
a) Supplying & fixing 50.8cm dia C.I. Man hole frame & cover for 914.4 mm dia
687 BMW-I.93
chamber(Medium weight) as per IS:1726 - 40 Kgs
Each 1768
Cost. 50.8 mm thick RCM baffle wall with 2.267 Kg steel & rabbit wire mesh in CM
689 BMW-I.95
1:3 with fine rendering in neat cement labour charges Only
1Sqm 165
690 BMW-I.96 a) Cost. 50.8 mm RCC partition wall 1Sqm 183
691 BMW-I.97 b) - do - labour charges only 1 Sqm 40
692 BMW-I.98 a)S& F double layer of bamboo matting tarred on both sides. 10 Sqm 401
693 BMW-I.99 b) - do - labour charges only 10 Sqm 112
BMW-
694
I.100
Removing of 101.6 m or 76.2 mm CI pipe 1 RM 34
BMW-
695
I.101
a) Supplying & fixing 76.2 mm W.I clamps Each 13
BMW-
696
I.102
BMW-
697
I.103
a) Supplying & fixing NP coat hook Each 29
BMW-
698
I.104
BMW- a) Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2
699
I.105 mm
Each 317
BMW-
700
I.106
BMW-
701
I.107
a) Supplying & fixing GI pipe plug of size 12.7 mm dia Each 7
BMW-
702
I.108
BMW-
703
I.109
a) Supplying & fixing 19.06 mm dia GI plug Each 10
BMW-
704
I.110
BMW-
705
I.111
a) Supplying and fixing 38.1 mm dia of GI plug Each 50
BMW-
706
I.112
BMW-
707
I.113
a) Supplying & fixing 50.8 mm dia of GI PLUG Each 79
BMW-
708
I.114
BMW-
709
I.115
a) Supplying & fixing 76.2 mm dia of GI PLUG Each 145
BMW-
710
I.116
BMW-
711
I.117
a) Supplying & fixing C.P flange. Each 14
BMW-
712
I.118
BMW- a) Supplying & fixing stainless steel sink size 36" x 18" (914.4x457.2mm) 1 mm
713
I.119 thick with accessories
Each 5058
BMW-
714
I.120
BMW- a) Supplying & fixing SINGLE BOWL stainless steel sink size 24"x18"x8 "(609.6 x
715
I.121 457.2 x 203.2mm) 1 mm thick with accessories
Each 3916
BMW-
716
I.122
BMW- a) Supplying & fixing stainless steel sink size 20" x18" x 8 "(508x457.2x203.2mm) 1
717
I.123 mm thick with accessories
Each 3501
Page # 86
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW-
718
I.124
BMW- Supplying & fixing 4 " x 24 " (101.6x609.6mm) white glazed porcelain channel fixed
719
I.125 in brick masonry white cement pointing.
Each 354
BMW- Supply & Fixing of steel surgical long elbow action handle 12.7 mm dia bib cock
720
I.126 Indian make heavy type including all materials
Each 707.14
Supply & fixing 2 1/2" (63.5mm) dia Sluice valve ISI mark with 2 Nos. flanges, 8
BMW-
721
I.127
nos, 3/4" dia nuts & bolts and all necessary washers and packing materials etc. Each 3872.45
complete
BMW-
722
I.128
Supply & fixing porcelain P' trap Each 166.84
BMW-
723
I.129
Supplying & fixing oval shape basin white (520x410mm)parry or equivalent Each 1772.45
BMW- Supply & fixing RCC cover 22" dia with nominal reinforcement 3 " thick and hooks
724
I.130 for lifting
Each 503.57
BMW- st
725
I.131
Supply & fixing cp spl. Grating with frame and cover of 1 quality Each 45.15
BMW-
726
I.132
Supply & fixing towel rod (CP) of 24" long and 3/4 " dia Each 283.16
BMW-
727
I.133
Supply & fixing of LLC handle set 1stquality Each 56.63
BMW-
728
I.134
Mechanical Cleaning of water sumps with pumps & UV disinfecting 1000 Lit 39.03
BMW-
729
I.135
Supply & fixing 4" dia CP thimble pipe: 150 mm long Each 295.41
BMW-
730
I.136
Supply & fixing 4" dia CP thimble pipe:220 mm long Each 440.82
BMW-
731
I.137
Supply & fixing 4" dia CP thimble pipe: 300 mm long Each 588.52
BMW-
732
I.138
Supply & fixing CP long bend Each 249.49
BMW-
733
I.139
Supply & fixing CP short bend Each 124.74
BMW- Supplying & fixing 15 mm bib tap with flange Chromeum plated Jaquar make queen
734
I.140 series
Each 1229.85
BMW- Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook
735
I.141 ofJaquar make queen series with 7 years warranty Chrome plated
Each 3115.56
BMW- Supply & fixing bib cock cum health faucet with 1 m long flexible tube and wall hook
736
I.142 ofJaquar make queen series with 7 years warranty: Ivory gold
Each 5238.52
BMW- Supply & fixing pillar cock Jaquar make Queen series with 7 years warranty:
737
I.143 Chrome plated
Each 1290.31
BMW- Supply & fixing pillar cock Jaquar make Queen series with 7 years warranty: Ivory
738
I.144 gold
Each 2203.32
BMW- Supply & fixing Angular stop cocks with wall flange Jaquar make Queen series with
739
I.145 7 years warranty: Chrome plated
Each 1274.23
BMW- Supply & fixing Angular stop cocks with wall flange Jaquar make Queen series with
740
I.146 7 years warranty: Ivory gold
Each 2467.35
BMW- Supply & fixing Waste coupling 32 mm size full thread with 80 mm heightJaquar
741
I.147 make with 7 years warranty: Chrome plated
Each 270.92
BMW-
742
I.148
Supply & fixing of Bottle trap Jaquar make with 7 years warranty: Chrome plated Each 1217.60
BMW-
743
I.149
Supply & fixing of Bottle trap Jaquar make with 7 years warranty: Ivory gold Each 2059.44
BMW- Supply & Fixing copper pipe 450 mm long with nuts & washers Jaquar make with 7
744
I.150 years warranty: Chrome plated
Each 299.23
BMW- Supply & Fixing copper pipe 450 mm long with nuts & washers Jaquar make with 7
745
I.151 years warranty:Ivory gold
Each 579.34
Supply and fixing wall mirror with provision for over head shower and 115 mm long
BMW-
746
I.152
bend pipe with wall flange Jaquarmake queen series with 7 years warranty:Chrome Each 3935.97
plated
Supply and fixing wall mirror with provision for over head shower and 115 mm long
BMW-
747
I.153
bend pipe with wall flange Jaquarmake queen series with 7 years warranty: Ivory Each 6192.09
gold
Page # 87
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW- Supply & fixing overhead shower rose with revolving joint and 150 mm long swivel
748
I.154 shower arm Jaquar make queen series. with 7 years warranty:Chrome plated
Each 1826.02
BMW- Supply & fixing overhead shower rose with revolving joint and 150 mm long swivel
749
I.155 shower arm Jaquar make queen series. with 7 years warranty: Ivory Gold
Each 2675.51
BMW- Supply and Fixing Wall Mixer with Telephonic shower arrangement with crutch and
750
I.156 flexible pipe Jaquar series Ivory gold colour for bath tub. with 7 years warranty
Each 10431.89
Supply & fixing Bath tub overflow set complete with over flow cap, 450 mm Ball
BMW-
751
I.157
chain with rubber plug & union bend with brass nut Jaquar make, Ivory gold colour. Each 1270.41
with 7 years warranty
BMW- Supply & fixing sink cock with regular swinging spout with wall flange chromeplated
752
I.158 Jaquar make Queen series with 7 years warranty
Each 1824.49
BMW- Supply & fixingsoap dish Jaquar make queen series: with 7 years warranty:Chrome
753
I.159 plated
Each 1197.70
BMW- Supply & fixingsoap dish Jaquar make queen series: with 7 years warranty: Ivory
754
I.160 Gold
Each 1757.91
BMW- Supply & fixing of toilet paper holder Jaquar make Queen series. with 7 years
755
I.161 warranty: Chrome plated
Each 964.29
BMW- Supply & fixing of toilet paper holder Jaquar make Queen series. with 7 years
756
I.162 warranty: Ivory Gold
Each 1698.21
BMW- Supply & Fixing of Towel ring Jaquar make Queen series with 7 years warranty:
757
I.163 Chrome plated
Each 906.89
BMW- Supply & Fixing of Towel ring Jaquar make Queen series with 7 years warranty:
758
I.164 Ivory Gold
Each 1480.87
BMW- Supply & Fixingof towel coat hook Jaquar make Queen series with 7 years
759
I.165 warranty:Chrome plated
Each 674.23
BMW- Supply & Fixingof towel coat hook Jaquar make Queen series with 7 years
760
I.166 warranty:Ivory Gold
Each 1395.92
BMW- Supply & Fixing of Towel rod 24 " Jaquar make Queen series Ivory gold colour with
761
I.167 7 years warranty
Each 2315.05
BMW- Supply & Fixing of Tumbler holder Jaquar make Queen series, Ivory gold colour
762
I.168 with 7 years warranty
Each 1622.45
BMW- Supply & fixing of Glass shelf 22" Jaquar make Queen series, Ivory gold colour with
763
Each 3163.78
BMW- Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of
764
I.170 Jaquar Continental series, Chrome Finish with 7 years warranty
Each 2295.92
BMW- Supply & Fixing of Bibcock Jaquar Continental series, Chrome Finish with 7 years
765
I.171 warranty
Each 674.23
BMW- Supply & Fixing of Pillar cock Jaquar Continental series, Chrome Finish with 7 years
766
I.172 warranty
Each 838.01
BMW- Supply & Fixing of Angular stopcock with wall flange Jaquar Continental series,
767
I.173 Chrome finish with 7 years warranty
Each 623.72
BMW-
768
I.174
Supply fixing of Waste coupling Jaquar make, Chrome finish with 7 years warranty Each 270.92
BMW-
769
I.175
Supply & Fixing of Bottle Trap Jaquar make, Chrome finish with 7 years warranty Each 1217.60
BMW- Supply & Fixing of copper pipe 450mm long with nuts & washers Jaquar make,
770
I.176 Chrome Finish with 7 years warranty
Each 270.92
Supply & Fixing of Wall Mixer with provision for overhead shower and 115mm long
BMW-
771
I.177
bend pipe with wall flange Jaquar make Continental series, Chrome finish with 7 Each 2947.96
years warranty
BMW- Supply & Fixing of Exclusive overhead shower with 190mm long light body shower
772
I.178 arm Jaquar make Continental series, Chrome finish with 7 years warranty
Each 1258.93
Supply & Fixing wall mixer with telephonic shower arrangement with crutch and
BMW-
773
I.179
telephone shower with flexible tube Jaquar make Continental series Chrome colour Each 4116.58
for bath tub with 7 years warranty
Supply & Fixing bath tub over flow set complete with over flow cap,450mm ball
BMW-
774
I.180
chain with rubber plug 7 Union bend with brass nuts Jaquar make, Chrome colour Each 961.22
with 7 years warranty
Page # 88
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW- Supply & Fixing Sink cock with regular swinging spout with flange chrome plated
775
I.181 Jaquar make Continental series with 7 years warranty
Each 1186.22
BMW- Supply & Fixing soap dish Jaquar make Continental series, Chrome Finish with 7
776
I.182 years warranty
Each 934.44
BMW- Supply & Fixing of Toilet paper holder Jaquar make Continental series, Chrome
777
I.183 finish with 7 years warranty
Each 623.72
BMW- Supply & Fixing of Towel Ring Jaquar make Continental series, Chrome finish with
778
Each 717.09
BMW- Supply & Fixing Double coat hook Jaquar make Continental series, Chrome finish
779
Each 535.71
BMW- Supply & Fixing of towel rail 24'' Jaquar make Continental series, Chrome finish with
780
Each 1157.91
BMW- Supply & Fixing of Tumblerholder Jaquar make Continental series, Chrome finish
781
Each 780.61
BMW- Supply & Fixing of Glass shelf 22'' Jaquar make Continental series, Chrome finish
782
Each 1535.20
BMW- Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of
783
I.189 Jaquar Florentine(Quarter turn) series, Chrome Finish with 7 years warranty
Each 2746.68
BMW- Supply & Fixing of Bibcock Jaquar Florentine (Quarter turn)series, Chrome Finish
784
Each 926.02
BMW- Supply & Fixing of Pillar cock Jaquar Florentine(Quarter turn) series, Chrome Finish
785
Each 926.02
BMW- Supply & Fixing of Angular stopcock with wall flange Jaquar Florentine( Quarter
786
I.192 turn)series, Chrome finish with 7 years warranty
Each 910.71
BMW-
787
I.193
Supply & Fixing of Bottle Trap Jaquar make, Chrome finish with 7 years warranty Each 1217.60
Supply & Fixing of Wall Mixer with provision for overhead shower and 115mm long
BMW-
788
I.194
bend pipe with wall flange Jaquar make Florentine(Quarter turn) series, Chrome Each 3557.14
finish with 7 years warranty
Supply & Fixing wall mixer with telephonic shower arrangement with crutch and
BMW-
789
I.195
telephone shower with flexible tube Jaquar make Florentine(Quarter turn) series Each 5360.97
Chrome colour for bath tub with 7 years warranty
BMW- Supply & Fixing Sink cock with regular swinging spout with flange chrome plated
790
I.196 Jaquar make Florentine(Quarter turn) series with 7 years warranty
Each 1421.17
BMW- Supply & Fixing of Rose shower with revolving ball joint & 115mm long shower arm
791
Each 1509.95
BMW- Supply & Fixing of Jaquar make chrome plated Metro pole flush valveconcealed
792
I.198 type with cover plate 40mm size with 7 years warranty
Each 2643.37
BMW- Supply & Fixing of Jaquar make Sensotronic sensor faucet for wash basin, Chrome
793
I.199 plated with 7 years warranty
Each 10382.91
Supply & fixing of Jaquar make Sensotronic concealed type flushing valve for urinal
BMW-
794
I.200
complete set with installation box with control cock, Chrome plated with 7 years Each 10382.91
warranty
BMW- Supply & fixing of Jaquar make Auto closing system pillar cock for wash basin,
795
I.201 Chrome plated with 7 years warranty
Each 1720.41
BMW- Supply& Fixing of Jaquar make Auto Closing system Bibcock, Chrome plated with 7
796
I.202 years warranty
Each 1804.59
S&F KITEC Polyethylene-Aluminium-Polyethylene (PE-AL-PE) composite pressure
pipes conforming to IS-15450-2004 with UV stabilized, carbon black for hot & cold
BMW- water supply, capable to withstand pressure up to 80 C including all special
797
I.203 composite fittings, plastic & brass blend inserts for elbows, tees, reducers, couplers,
1 RM 0.00
connectors etc complete for external works including laying pipes, fixing in position,
testing and commissioning etc :16 mm OD pipe

798
1 RM 155
testing and commissioning etc :20 mm OD pipe
Page # 89
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes

799
1 RM 194
testing and commissioning etc: 25mm OD pipe

800
1 RM 260
testing and commissioning etc: 32 mm OD pipe

801
1 RM 342
testing and commissioning etc: 40 mm OD pipe

802
1 RM 435
testing and commissioning etc : 50 mm OD pipe

water supply, capable to withstand pressure up to 80 C including all special
BMW-
803
I.209
composite fittings, plastic & brass blend inserts for elbows, tees, reducers, couplers, 1 RM 180
connectors etc complete with MS Iron clamps at 1.0 M spacing including cutting,
chasing walls, making good, laying pipes, fixing in position, testing and
commissioning etc16 mm OD pipe

BMW-
804
I.210
BMW-
805
I.211
commissioning etc25mm OD pipe
BMW-
806
I.212
Page # 90
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes

BMW-
807
I.213

BMW-
808
I.214
S&F Polyethylene-Aluminium-Polyethylene (PE-AL-PE) composite pressure pipes
conforming to IS-15450-2004 with UV stabilized, carbon black for hot & cold water
supply, capable to withstand pressure up to 80 C including all special composite
BMW-
809
I.215
fittings, plastic & brass blend inserts for elbows, tees, reducers, couplers, 1 RM 147
connectors etc complete including excavating trenches up to 1.0 M deep laying
pipes, fixing in position, testing, refilling excavated earth and commissioning etc16
mm OD pipe
BMW-
810
I.216
mm OD pipe
BMW-
811
I.217
pipes, fixing in position, testing, refilling excavated earth and commissioning
etc25mm OD pipe
BMW-
812
I.218
mm OD pipe
BMW-
813
I.219
mm OD pipe
Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the
requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2"
ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential 0
CPVC compounds having the same physical Properties for Hot and Cold Water (IS
15778:2007)
BMW-
814 15.90mm ODPipe - SDR 13.5 1 RM
I.220
BMW-
815
I.221
22.20mm ODPipe - SDR 13.5 1 RM 114.03
BMW-
816
I.222
28.60mm ODPipe - SDR 13.5 1 RM 151.53
BMW-
817
I.223
34.90mm ODPipe - SDR 13.5 1 RM 206.63
Page # 91
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW-
818
I.224
41.30mm ODPipe - SDR 13.5 1 RM 257.14
BMW-
819
I.225
54.00mm ODPipe - SDR 13.5 1 RM 375.00
BMW-
820
I.226
15.90mm ODPipe - SDR 11 1 RM 111.73
BMW-
821
I.227
22.20mm ODPipe - SDR 11 1 RM 134.69
BMW-
822
I.228
28.60mm ODPipe - SDR 11 1 RM 162.24
BMW-
823
I.229
34.90mm ODPipe - SDR 11 1 RM 221.17
BMW-
824
I.230
41.30mm ODPipe - SDR 11 1 RM 273.98
BMW-
825
I.231
54.00mm ODPipe - SDR 11 1 RM 400.26
BMW- Supply of 20mm x 1.9mm PN 10/PPR Pipe conforming to DIN Standards 8077/8078
826
I.232 conforming to IS15801
1 RM 34.44
827
1 RM 58
828
1 RM 91
829
1 RM 143
830
1 RM 255
831
1 RM 401
832
1 RM 557
833
1 RM 764
BMW- Supply of 110mm x 10mm PN 10/PPR Pipe conforming to DIN Standards
834
I.240 8077/8084 conforming to IS15801
1 RM 1133
835
1 RM 53
836
1 RM 81
837
1 RM 129
838
1 RM 199
839
1 RM 356
840
1 RM 561
BMW- Supply of 75mm x 10.3mm PN 16/PPR Pipe conforming to DIN Standards
841
1 RM 793
842
1 RM 1131
843
1 RM 1694
844
1 RM 61
845
1 RM 94
846
1 RM 151
847
1 RM 232
848
1 RM 412
Page # 92
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes

849
1 RM 651
850
1 RM 923
BMW-
851
I.257
Supply of 90mm x 15mm PN 20/PPR Pipe conforming to DIN Standards 8077/8083 1 RM 1253
852
1 RM 1974
BMW-
853
I.259
Supply of 20mm PPR Socket conforming to DIN Standards 8077/8084 1 RM 9
BMW-
854
I.260
BMW-
855
I.261
BMW-
856
I.262
BMW-
857
I.263
BMW-
858
I.264
BMW-
859
I.265
BMW-
860
I.266
BMW-
861
I.267
BMW-
862
I.268
Supply of 32mm PPR Core Flange conforming to DIN Standards 8077/8086 Each 33
BMW-
863
I.269
BMW-
864
I.270
BMW-
865
I.271
BMW-
866
I.272
BMW-
867
I.273
BMW-
868
I.274
BMW-
869
I.275
Supply of 20mm PPR Elbow conforming to DIN Standards 8077/8084 Each 14
BMW-
870
I.276
BMW-
871
I.277
BMW-
872
I.278
BMW-
873
I.279
BMW-
874
I.280
BMW-
875
I.281
BMW-
876
I.282
BMW-
877
I.283
BMW-
878
I.284
Supply of 20mm PPR Tee conforming to DIN Standards 8077/8084 Each 13
BMW-
879
I.285
Page # 93
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW-
880
I.286
BMW-
881
I.287
BMW-
882
I.288
BMW-
883
I.289
BMW-
884
I.290
BMW-
885
I.291
BMW-
886
I.292
BMW-
887
I.293
Supply of 20mm PPR End Cap conforming to DIN Standards 8077/8084 Each 6
BMW-
888
I.294
BMW-
889
I.295
BMW-
890
I.296
BMW-
891
I.297
BMW-
892
I.298
BMW-
893
I.299
BMW-
894
I.300
BMW-
895
I.301
BMW-
896
I.302
Supply of 25mm x 20mm PPR Reducer conforming to DIN Standards 8077/8092 Each 10
BMW-
897
I.303
BMW-
898
I.304
BMW-
899
I.305
BMW-
900
I.306
BMW-
901
I.307
BMW-
902
I.308
BMW-
903
I.309
BMW-
904
I.310
BMW-
905
I.311
BMW-
906
I.312
BMW-
907
I.313
BMW-
908
I.314
BMW-
909
I.315
BMW-
910
I.316
Page # 94
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW-
911
I.317
BMW-
912
I.318
BMW-
913
I.319
BMW-
914
I.320
BMW-
915
I.321
BMW-
916
I.322
BMW-
917
I.323
BMW-
918
I.324
BMW- Supply of 25mm x 20mm x 25mm PPR Reducer Tee conforming to DIN Standards
919
I.325 8077/8092
Each 28
920
I.326 8077/8092
Each 48
921
I.327 8077/8092
Each 49
922
I.328 8077/8092
Each 80
923
I.329 8077/8092
Each 82
924
I.330 8077/8092
Each 83
925
I.331 8077/8092
Each 116
926
I.332 8077/8092
Each 117
927
I.333 8077/8092
Each 121
928
I.334 8077/8092
Each 122
929
I.335 8077/8092
Each 336
930
I.336 8077/8092
Each 338
931
I.337 8077/8092
Each 342
932
I.338 8077/8092
Each 348
933
I.339 8077/8092
Each 353
934
I.340 8077/8092
Each 474
935
I.341 8077/8092
Each 482
936
I.342 8077/8092
Each 639
937
I.343 8077/8092
Each 679
BMW- Supply of 110mm x 75mm x 110mm PPR Reducer Tee conforming to DIN
938
I.344 Standards 8077/8092
Each 1158
BMW- Supply of 110mm x 90mm x 110mm PPR Reducer Tee conforming to DIN
939
Each 1204
BMW- Supply of 20mm x ½” PPR Female Threaded Adaptor conforming to DIN Standards
940
I.346 8077/8092
Each 89
941
I.347 8077/8092
Each 91
Page # 95
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW- Supply of 25mm x ¾” PPR Female Threaded Adaptor conforming to DIN Standards
942
I.348 8077/8092
Each 160
943
I.349 8077/8092
Each 162
BMW- Supply of 32mm x ¾” PPR Female Threaded Adaptor conforming to DIN Standards
944
I.350 8077/8092
Each 168
BMW- Supply of 32mm x 1" PPR Female Threaded Adaptor conforming to DIN Standards
945
I.351 8077/8092
Each 259
BMW- Supply of 40mm x 1¼” PPR Female Threaded Adaptor conforming to DIN
946
Each 384
BMW- Supply of 50mm x 1½” PPR Female Threaded Adaptor conforming to DIN
947
Each 537
BMW- Supply of 63mm x 2" PPR Female Threaded Adaptor conforming to DIN Standards
948
I.354 8077/8092
Each 713
BMW- Supply of 75mm x 2½”PPR Female Threaded Adaptor conforming to DIN Standards
949
I.355 8077/8092
Each 1376
BMW- Supply of 20mm x ½” PPR Male Threaded Adaptor conforming to DIN Standards
950
I.356 8077/8092
Each 138
BMW- Supply of 25mm x ½” PPR Male Threaded Adaptor conforming to DIN Standards
951
I.357 8077/8092
Each 143
BMW- Supply of 25mm x ¾” PPR Male Threaded Adaptor conforming to DIN Standards
952
I.358 8077/8092
Each 208
BMW- Supply of 32mm x ¾” PPR Male Threaded Adaptor conforming to DIN Standards
953
I.359 8077/8092
Each 218
BMW- Supply of 32mm x 1" PPR Male Threaded Adaptor conforming to DIN Standards
954
I.360 8077/8092
Each 404
BMW- Supply of 40mm x 1¼” PPR Male Threaded Adaptor conforming to DIN Standards
955
I.361 8077/8092
Each 474
BMW- Supply of 50mm x 1½” PPR Male Threaded Adaptor conforming to DIN Standards
956
I.362 8077/8092
Each 662
BMW- Supply of 63mm x 2" PPR Male Threaded Adaptor conforming to DIN Standards
957
I.363 8077/8092
Each 1019
BMW- Supply of 75mm x 2½”PPR Male Threaded Adaptor conforming to DIN Standards
958
I.364 8077/8092
Each 1629
BMW- Supply of 20mm x ½” PPR Female Threaded Elbow conforming to DIN Standards
959
I.365 8077/8092
Each 95
960
I.366 8077/8092
Each 99
BMW- Supply of 25mm x ¾” PPR Female Threaded Elbow conforming to DIN Standards
961
I.367 8077/8092
Each 153
962
I.368 8077/8092
Each 147
BMW- Supply of 32mm x ¾” PPR Female Threaded Elbow conforming to DIN Standards
963
I.369 8077/8092
Each 172
BMW- Supply of 32mm x 1" PPR Female Threaded Elbow conforming to DIN Standards
964
I.370 8077/8092
Each 287
BMW- Supply of 20mm x ½” PPR Male Threaded Elbow conforming to DIN Standards
965
I.371 8077/8092
Each 143
966
I.372 8077/8092
Each 156
BMW- Supply of 25mm x ¾” PPR Male Threaded Elbow conforming to DIN Standards
967
I.373 8077/8092
Each 207
968
I.374 8077/8092
Each 199
BMW- Supply of 32mm x1" PPR Male Threaded Elbow conforming to DIN Standards
969
I.375 8077/8092
Each 429
BMW- Supply of 20mm x ½” PPR Female Threaded Tee conforming to DIN Standards
970
I.376 8077/8092
Each 92
971
I.377 8077/8092
Each 101
BMW- Supply of 25mm x ¾” PPR Female Threaded Tee conforming to DIN Standards
972
I.378 8077/8092
Each 168
Page # 96
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
973
I.379 8077/8092
Each 177
BMW- Supply of 32mm x ¾” PPR Female Threaded Tee conforming to DIN Standards
974
I.380 8077/8092
Each 199
BMW- Supply of 32mm x 1" PPR Female Threaded Tee conforming to DIN Standards
975
I.381 8077/8092
Each 280
BMW- Supply of 20mm x ½” PPR Male Threaded Teeconforming to DIN Standards
976
I.382 8077/8092
Each 144
BMW- Supply of 25mm x ½” PPR Male Threaded Tee conforming to DIN Standards
977
I.383 8077/8092
Each 153
BMW- Supply of 25mm x ¾” PPR Male Threaded Tee conforming to DIN Standards
978
I.384 8077/8092
Each 220
BMW- Supply of 32mm x ½” PPR Male Threaded Tee conforming to DIN Standards
979
I.385 8077/8092
Each 224
BMW- Supply of 32mm x¾”PPR Male Threaded Tee conforming to DIN Standards
980
I.386 8077/8092
Each 237
BMW- Supply of 32mm x 1" PPR Male Threaded Tee conforming to DIN Standards
981
I.387 8077/8092
Each 438
BMW- Supply of 20mm x ½” PPR Female Threaded Union conforming to DIN Standards
982
I.388 8077/8092
Each 370
BMW- Supply of 25mm x¾”PPR Female Threaded Union conforming to DIN Standards
983
I.389 8077/8092
Each 554
BMW- Supply of 32mm x1”PPR Female Threaded Union conforming to DIN Standards
984
I.390 8077/8092
Each 740
BMW- Supply of 40mm x1¼”PPR Female Threaded Union conforming to DIN Standards
985
I.391 8077/8092
Each 1037
BMW- Supply of 50mm x 1½” PPR Female Threaded Union conforming to DIN Standards
986
I.392 8077/8092
Each 1667
BMW- Supply of 63mm x 2” PPR Female Threaded Union conforming to DIN Standards
987
I.393 8077/8092
Each 2647
BMW- Supply of 20mm x ½” PPR Male Threaded Union conforming to DIN Standards
988
I.394 8077/8092
Each 424
BMW- Supply of 25mm x¾”PPR Male Threaded Union conforming to DIN Standards
989
I.395 8077/8092
Each 564
BMW- Supply of 32mm x1”PPR Male Threaded Union conforming to DIN Standards
990
I.396 8077/8092
Each 740
BMW- Supply of 40mm x1¼”PPR Male Threaded Union conforming to DIN Standards
991
I.397 8077/8092
Each 925
BMW- Supply of 50mm x 1½” PPR Male Threaded Union conforming to DIN Standards
992
I.398 8077/8092
Each 1759
BMW- Supply of 63mm x 2” PPR Male Threaded Union conforming to DIN Standards
993
I.399 8077/8092
Each 2963
BMW-
994
I.400
Supply of 20mm PPR Union conforming to DIN Standards 8077/8092 Each 81
BMW-
995
I.401
BMW-
996
I.402
BMW-
997
I.403
Supply of 20mm PPR Ball Valve conforming to DIN Standards 8077/8092 Each 148
BMW-
998
I.404
BMW-
999
I.405
BMW-
1000
I.406
BMW-
1001
I.407
BMW-
1002
I.408
BMW-
1003
I.409
Page # 97
BASIC
RATE for
SOR 2013-
Sl. Item
No Code
excluding
subsumed
taxes
BMW-
1004
I.410
BMW-
1005
I.411
Supply of 20mm PPR Clamp conforming to DIN Standards 8077/8092 Each 9
BMW-
1006
I.412
BMW-
1007
I.413
BMW-
1008
I.414
Labour charges for laying, joining, welding, fixing and commissioning the PPR pipes
BMW- including all specials such as couplers/ bends/ tees etc including fixing necessary
1009
I.415 fittings like bends, plugs, couplers, junctions, tees, etc with welding the joint as per
1 RM 26
standard practice - up to 40 mm dia
Labour charges for laying, joining, welding, fixing and commissioning the PPR pipes
BMW- including all specials such as couplers/ bends/ tees etc including fixing necessary
1010
I.416 fittings like bends, plugs, couplers, junctions, tees, etc with welding the joint as per
1 RM 45
standard practice - above 40 mm dia
Page # 98
GOVERNMENT OF ANDHRA PRADESH
ROADS AND BUILDINGS DEPARTMENT
Buildings SoR 2013-14 ( Electrical Items)

BASIC
RATE for
SOR 2013-
SL Item
QTY DESCRIPTION 14
NO Code
excluding
subsumed
taxes
1 2 3 4 5
SECTION - I
1.1 M.S. PIPES
1 ELEC-1.1.1 1 Mtr Supply of ISI, 20mm dia, 16 guage thickness MS conduit 53.46
pipe of makes NAI / Bharath / GB.
5 ELEC-1.1.5 1 Mtr Supply of ISI, 50mm dia,16 guage thickness MS conduit 133.65
6 ELEC-1.1.6 1 No Supply of 19 / 20 mm MS Junction box normal range big 18.15
size long neck.
7 ELEC-1.1.7 1 No Supply of 25 mm MS Junction box normal range big size 18.15
long neck.
long neck.
9 ELEC-1.1.9 1 No Supply of 40 / 38 mm MS Junction box normal range big 55.275
size long neck.
long neck.
11 ELEC-1.1.11 1 No Supply of 25/20mm.MS Junction deep box. 28.875
12 ELEC-1.1.12 1 No Supply of 32mm.MS Junction deep box. 66.825
13 ELEC-1.1.13 1 No Supply of 40mm.MS Junction deep box. 69.3
14 ELEC-1.1.14 1 No Supply of 19/20mm MS Inspection Bends. 16.5
15 ELEC-1.1.15 1 No Supply of 25mm MS Inspection Bends. 16.5
17 ELEC-1.1.17 1 No Supply of 40/38mm MS Inspection Bends. 50.325
19 ELEC-1.1.19 1 No Supply of 19/20mm MS Inspection Tee. 17.325
20 ELEC-1.1.20 1 No Supply of 25mm MS Inspection Tee. 18.15
22 ELEC-1.1.22 1 No Supply of 40/38mm MS Inspection Tee. 55.275
24 ELEC-1.1.24 1 No Supply of 19/20mm MS Inspection Elbow. 15.675
25 ELEC-1.1.25 1 No Supply of 25mm MS Inspection Elbow. 15.675
27 ELEC-1.1.27 1 No Supply of 40/38mm MS Inspection Elbow. 48.675
29 ELEC-1.1.29 100 Nos Supply of MS Inspection 10 Guage G.I. checknut size 154.275
19/20mm.
Page # 1
1 2 3 4 5
25mm.
32mm.
40/38mm.
50mm.
34 ELEC-1.1.34 100 Nos Supply of 19/20mm Saddles with Base. 158.4
35 ELEC-1.1.35 100 Nos Supply of 25mm Saddles with Base. 165
36 ELEC-1.1.36 100 Nos Supply of 32mm Saddles with Base. 272.25
37 ELEC-1.1.37 100 Nos Supply of 40/38mm Saddles with Base. 289.575
38 ELEC-1.1.38 100 Nos Supply of 50mm Saddles with Base. 334.125
39 ELEC-1.1.39 100 Nos Supply of 19/20mm 20 guage Saddles. 84.975
40 ELEC-1.1.40 100 Nos Supply of 25mm 20 guage Saddles. 111.375
42 ELEC-1.1.42 100 Nos Supply of 40/38mm 20 guage Saddles. 231
44 ELEC-1.1.44 12 Nos Supply of 19/20mm 16 Guage socket coupler. 42.9
45 ELEC-1.1.45 12 Nos Supply of 25mm 16 Guage socket coupler. 53.625
50 ELEC-1.1.50 12 Nos Supply of 19mm Ball Socket. 159.225
51 ELEC-1.1.51 12 Nos Supply of 25mm Ball Socket. 155.1
1.2 PVC CONDUIT PIPES
52 ELEC-1.2.1 1 Mtr Supply of ISI 20mm outer dia medium (1.55mm thickness) 15.015
grade with IS:9537 part 3 regid PVC pipe of makes
Sudhakar / Modi / Atul.
53 ELEC-1.2.2 1 Mtr Supply of ISI 20mm outer dia heavy (2.10mm thickness) 18.975
55 ELEC-1.2.4 1 Mtr Supply of ISI 25mm outer dia heavy (2.20mm thickness) 24.9975
59 ELEC-1.2.8 1 Mtr Supply of Non - ISI 19mm 1.50mm thick regid PVC pipe of 10.89
makes Million Plast / Sudhakar / Durga / Nandi / Sunlight /
Besto Plast.
Besto Plast.
Besto Plast.
Page # 2
1 2 3 4 5
Besto Plast.
63 ELEC-1.2.12 1 Mtr Supply of Non - ISI 32mm dia 2.0mm thickness PVC pipe 25.41
of makes Million Plast / Sudhakar / Durga / Nandi / Sunlight
/ Besto Plast.
/ Besto Plast.
/ Besto Plast.
66 ELEC-1.2.15 1 Mtr Supply of ISI 19/20mm width and 12.5mm height Casing 19.965
and Caping of Modi make.
67 ELEC-1.2.16 1 Mtr Supply of ISI 25mm width and 12.5mm height Casing and 24.9975
Caping of Modi make.
68 ELEC-1.2.17 1 Mtr Supply of ISI 32mm width and 12.5mm height Casing and 28.9575
Caping of Modi make.
69 ELEC-1.2.18 1 Mtr Supply of ISI 38/40mm width and 12.5mm height Casing 49.9125
and Caping of Modi make.
70 ELEC-1.2.19 1 Mtr Supply of Non - ISI 19/20mm width and 12.5mm height 13.6125
Casing and Caping of Diamond / Durga make.
71 ELEC-1.2.20 1 Mtr Supply of Non - ISI 25mm width and 12.5mm height Casing 14.52
and Caping of Diamond / Durga make.
72 ELEC-1.2.21 1 Mtr Supply of Non - ISI 32mm width and 12.5mm height Casing 19.0575
and Caping of Diamond / Durga make.
73 ELEC-1.2.22 1 Mtr Supply of Non - ISI 38/40mm width and 12.5mm height 28.1325
Casing and Caping of Diamond / Durga make.
74 ELEC-1.2.23 1 Mtr Supply of 19/20mm PVC Flexible Pipe. 2.8875

75 ELEC-1.2.24 1 Mtr Supply of 25mm PVC Flexible Pipe. 3.8775
77 ELEC-1.2.26 1 Mtr Supply of 40/38mm PVC Flexible Pipe. 9.57
79 ELEC-1.2.28 1 No Supply of 19/20mm PVC Flexible Couplings. 8.25
80 ELEC-1.2.29 1 No Supply of 25mm PVC Flexible Couplings. 10.725
82 ELEC-1.2.31 1 No Supply of 40/38mm PVC Flexible Couplings. 23.925
84 ELEC-1.2.33 1 No Supply of 19/20mm PVC Junction Boxes Normal. 13.2
85 ELEC-1.2.34 1 No Supply of 25mm PVC Junction Boxes Normal. 14.85

89 ELEC-1.2.38 1 No Supply of PVC Junction Boxes Deep size 19/20mm. 17.325
90 ELEC-1.2.39 1 No Supply of PVC Junction Boxes Deep size 25mm. 19.8

92 ELEC-1.2.41 1 No Supply of PVC Junction Boxes Deep size 40/38mm. 33.825

94 ELEC-1.2.43 1 No Supply of 19/20mm dia 1.5mm thick PVC Bends of 3.3
Sudhakar make.
Page # 3
1 2 3 4 5
95 ELEC-1.2.44 1 No Supply of 25mm dia 1.5mm thick PVC Bends of Sudhakar 4.95
make.
make.
make.
make.
99 ELEC-1.2.48 1 No Dummy Cover to PVC junction boxes 3.3
1.3 HOT DIP GALVANIZED METAL BOXES (MODULAR)
100 ELEC-1.3.1 1 No Supply of 1 or 2 Module box 44.55

101 ELEC-1.3.2 1 No Supply of 3 Module box 62.7
104 ELEC-1.3.5 1 No Supply of 8 or 9 Module box Horizontal/Vertical. 133.65
METALLIC BOXES (MS)
106 ELEC-1.3.7 1 No Supply of 4" x 4" Metal Box 36.5
109 ELEC-1.3.10 1 No Supply of 6" x 8" Metal Box 73
1.4 T.W. BOARDS
112 ELEC-1.4.1 1 No Deleted From SOR 12-13 ELEC-1.4.1
119 ELEC-1.4.8 1 No Supply of T.W.Deep Box of Size 4" x 4" 7.695
126 ELEC-1.4.15 1 No Deleted From SOR 12-13 ELEC-1.4.15 0
133 ELEC-1.4.22 1 No Supply of Decolam Board of Size 4" x 4" 11.115
140 ELEC-1.4.29 1 No Supply of Peeta Board of Size 9" x 14" 41.04
Page # 4
1 2 3 4 5
145 ELEC-1.4.34 100 Nos
Supply of No.8 Screws of 12mm. 46.17
146 ELEC-1.4.35 100 Nos
147 ELEC-1.4.36 100 Nos
148 ELEC-1.4.37 100 Nos
Supply of No.8 Screws of 35/38mm. 74.385
149 ELEC-1.4.38 100 Nos
150 ELEC-1.4.39 100 Nos
Supply of No.8 Screws of 63/75mm. 101.745
1.5 COPPER FLEXIBLE CABLES
(AS PER IS:694)
151 ELEC-1.5.1 100 Mtrs Supply of 14/0.3mm (1.0 Sqmm) FRLS / HFFR PVC 825.825
insulated 1100V grade as perIS:694/1990 specification for
Copper cable of makes Finolex / RR kabel
156 ELEC-1.5.6 100 Mtrs Supply of 140/0.3mm (10.0 Sqmm) PVC FRLS / HFFR 7095
insulated flexible Copper cable of makes Finolex / RR kabel
insulated flexible Copper cable of makes Finolex / RR kabel
158 ELEC-1.5.8 100 Mtrs Supply of 14/0.3mm (1.0 Sqmm) FRLS / HFFR PVC 726
Copper cable of makes KEI / Polycab / Havells / GM /
Million / HPL / Gold Medal / Power Flex / RPG / Anchor /
Sun Cab / Fortune Art / Great white.
Page # 5
1 2 3 4 5
insulated flexible Copper cable of makes KEI / Polycab /
Havells / GM / Million / HPL / Gold Medal / Power Flex /
RPG / Anchor / Sun Cab / Fortune Art.
insulated flexible Copper cable of makes KEI / Polycab /
Havells / GM / Million / HPL / Gold Medal / Power Flex /
RPG / Anchor / Sun Cab / Fortune Art.
Copper cable of makes Standard / Vimal / V-Guard /
Nakoda / Star / Milltec / Fine Cab / Payal / Bentec /
Gemscab / Gloster.
Gemscab / Gloster.
Gemscab / Gloster.
Gemscab / Gloster.
Gemscab / Gloster.
Gemscab / Gloster.
Gemscab / Gloster.
SHEATHED FLEXIBLE CABLES

172 ELEC-1.5.22 100 Mtrs Supply of PVC insulated 2 core 1.5 Sqmm sheathed flexible 3291.75
copper cable for voltage up to 1100V as per IS 694/1990 of
makes Finolex / RR Kable.
Page # 6
1 2 3 4 5
178 ELEC-1.5.28 100 Mtrs Supply of PVC insulated 4 core 1.5 Sqmm sheathed flexible 5808
1.6 SERVICE MAINS AND FLAT CABLE OF ISI FOR

SUBMERSIBLE MOTORS.
181 ELEC-1.6.1 100 Mtrs Supply of 2.5 Sqmm WPSC (Weather Proof Single Core) 579.15
ISI Alluminium Wire of makes Finolex / GM / Million / V-
Guard / Payal / Nakoda / Gold Medal / HPL / RPG.
182 ELEC-1.6.2 100 Mtrs Supply of 6 Sqmm WPSC (Weather Proof Single Core) ISI 1176.45
Alluminium Wire of makes Finolex / GM / Million / V-Guard /
Payal / Nakoda / Gold Medal / HPL / RPG.
185 ELEC-1.6.5 100 Mtrs Supply of 6 Sqmm WPTC (Weather Proof Twin Core) ISI 2370.225
186 ELEC-1.6.6 100 Mtrs Supply of 10 Sqmm WPTC (Weather Proof Twin Core) ISI 2851.2
Page # 7
1 2 3 4 5
187 ELEC-1.6.7 100 Mtrs Supply of 16 Sqmm WPTC (Weather Proof Twin Core) ISI 5346
188 ELEC-1.6.8 100 Mtrs Supply of 23 / 0060 twin core twisted / flat heavy Copper 816.75
wire of makes Finolex / GM / Million / V-Guard / Payal /
Nakoda / Gold Medal / HPL / RPG.
189 ELEC-1.6.9 100 Mtrs Supply of 3 Core 1.5 Sqmm Flat Copper cable of ISI for 4492.125
Submersible Motors of makes Finolex / GM / Million / V-
Guard / Payal / Nakoda / Gold Medal / HPL / RPG.
190 ELEC-1.6.10 100 Mtrs Supply of 3 Core 2.5 Sqmm Flat Copper cable as per IS 6897
694:1990 for Submersible Motors of makes Finolex / GM /
Million / V-Guard / Payal / Nakoda / Gold Medal / HPL /
RPG.
191 ELEC-1.6.11 100 Mtrs Supply of 3 Core 4.0 Sqmm Flat Copper cable as per IS 10345.5
RPG.
192 ELEC-1.6.12 100 Mtrs Supply of 3 Core 6.0 Sqmm Flat Copper cable as per IS 15246
RPG.
193 ELEC-1.6.13 100 Mtrs Supply of 3 Core 10.0 Sqmm Flat Copper cable as per IS 24774.75
RPG.
1.7 FLUSH TYPE SWITCHES AND ACCESSORIES
194 ELEC-1.7.1 1 No Supply of 6A 1 Way flush type Swich of makes GM G Home 13.14
/ Gold Medal Olive / Million Zoom / Anchor Penta Cherry /
Great white Omega
195 ELEC-1.7.2 1 No Supply of 6A 2 Way flush type Swich of makes GM G Home 15.33
Great white Omega
196 ELEC-1.7.3 1 No Supply of 6A 2 pin flush type Socket of makes GM G Home 14.6
Great white Omega
197 ELEC-1.7.4 1 No Supply of 6A 3/2 pin flush type Socket with shutter of makes 19.71
GM G Home / Gold Medal Olive / Million Zoom / Anchor
Penta Cherry / Great white Omega
198 ELEC-1.7.5 1 No Supply of 6A flush type Neon Indicator of makes GM G 14.6

Home / Gold Medal Olive / Million Zoom / Anchor Penta
Cherry / Great white Omega
199 ELEC-1.7.6 1 No Supply of 6A Triangle Plug Top of makes GM G Home / 25.55
Gold Medal Olive / Million Zoom / Anchor Penta Cherry /
Great white Omega
200 ELEC-1.7.7 1 No Supply of 6A 1 Way flush type Bed Swich / Bell Push of 15.33
makes GM G Home / Gold Medal Olive / Million Zoom /
Anchor Penta Cherry / Great white Omega
201 ELEC-1.7.8 1 No Supply of 16A flush type Swich of makes GM G Home / 47.45
Great white Omega
Page # 8
1 2 3 4 5
202 ELEC-1.7.9 1 No Supply of 16A flush type Socket with shutter of makes GM 47.45
G Home / Gold Medal Olive / Million Zoom / Anchor Penta
203 ELEC-1.7.10 1 No Supply of 16A flush type Switch Socket combined (2 in one) 74.46
of makes GM G Home / Gold Medal Olive / Million Zoom /
Anchor Penta Cherry / Great white Omega

205 ELEC-1.7.12 1 No Supply of 16A Triangle Plug Top of makes GM G Home / 36.5
Great white Omega
207 ELEC-1.7.14 1 No Supply of stepped type Electronic Regulator of makes GM G 160.6
208 ELEC-1.7.15 1 No Supply of 3 Plate Jumbo Ceiling Rose of makes Anchor / 15.33
Gold Medal Olive / Million Zoom.
209 ELEC-1.7.16 1 No Supply of BH / SBH of makes Anchor / Gold Medal Olive / 14.6
Million Zoom.
210 ELEC-1.7.17 1 No Supply of Pendent Holder / Adopter of makes Anchor / Gold 12.41
Medal Olive / Million Zoom.
211 ELEC-1.7.18 1 No Supply of Telephone Jack with Connector of makes GM G 35.04
212 ELEC-1.7.19 1 No Supply of TV Antenna Outlet of makes GM G Home / Gold 18.98

Medal Olive / Million Zoom / Anchor Penta Cherry / Great
white Omega
213 ELEC-1.7.20 1 No Supply of 15A/10A Flush type Fuse of makes GM / Million / 23.36
Gold Medal / Maru Mantero / Anchor Penta Cherry / Great
white.
214 ELEC-1.7.21 1 No Supply of 32A DP Flush type of makes GM / Million / Gold 77.38
Medal / Maru Mantero / Anchor Penta Cherry / Great white.
215 ELEC-1.7.22 1 No Supply of Calling Bell of makes GM / Million / Gold Medal / 36.5
Maru / Anchor / Great white.
216 ELEC-1.7.23 1 No Supply of Buzzer of makes GM / Million / Gold Medal / Maru 32.85
/ Anchor / Great white.
217 ELEC-1.7.24 1 No Supply of Ding Dong Bell of makes GM / Million / Gold 74.46
Medal / Maru / Anchor / Great white.
218 ELEC-1.7.25 1 No Supply of Electronic Musical Bell of makes GM / Million / 175.2
Gold Medal / Maru / Anchor / Great white.
219 ELEC-1.7.26 1 No Supply of Remote Bell of makes GM / Million / Gold Medal / 328.5
221 ELEC-1.7.28 1 No Supply of MC Holder of makes GM / Million / Gold Medal / 15.33
222 ELEC-1.7.29 1 No Supply of Spike Guard with 1 No Switch and 4 Nos Sockets 226.3
of makes GM / Million / Gold Medal / Maru / Anchor / Great
white.
223 ELEC-1.7.30 1 No Supply of Spike Guard with 4 No Switches and 4 Nos 299.3
Sockets of makes GM / Million / Gold Medal / Maru / Anchor
/ Great white.
224 ELEC-1.7.31 1 No Supply of 6A 1 Way flush type Swich of makes Vimal opel / 10.95
Maru Mantero / Starex Smile / CPL.
Page # 9
1 2 3 4 5
225 ELEC-1.7.32 1 No Supply of 6A 2 Way flush type Swich of makes Vimal opel / 13.87
226 ELEC-1.7.33 1 No Supply of 6A 2 pin flush type Socket of makes Vimal opel / 10.95
227 ELEC-1.7.34 1 No Supply of 6A 3/2 pin flush type Socket with shutter of makes 14.6
Vimal opel / Maru Mantero / Starex Smile / CPL.
228 ELEC-1.7.35 1 No Supply of 6A flush type Neon Indicator of makes Vimal opel 13.14
/ Maru Mantero / Starex Smile / CPL.
229 ELEC-1.7.36 1 No Supply of 6A Triangle Plug Top of makes Vimal opel / Maru 20.44
Mantero / Starex Smile / CPL.
230 ELEC-1.7.37 1 No Supply of 6A 1 Way flush type Bed Swich / Bell Push of 13.14
makes Vimal opel / Maru Mantero / Starex Smile / CPL.
231 ELEC-1.7.38 1 No Supply of 16A flush type Swich of makes Vimal opel / Maru 40.15
Mantero / Starex Smile / CPL.
232 ELEC-1.7.39 1 No Supply of 16A flush type Socket with shutter of makes Vimal 40.15
opel / Maru Mantero / Starex Smile / CPL.
233 ELEC-1.7.40 1 No Supply of 16A flush type Switch Socket combined (2 in one) 62.05
of makes Vimal opel / Maru Mantero / Starex Smile / CPL.

235 ELEC-1.7.42 1 No Supply of 16A Triangle Plug Top of makes Vimal opel / 32.12
236 ELEC-1.7.43 1 No Supply of stepped type Electronic Regulator of makes Vimal 131.4
opel / Maru Mantero / Starex Smile / CPL.
237 ELEC-1.7.44 1 No Supply of 3 Plate Jumbo Ceiling Rose of makes Vimal opel 11.68
/ Maru Mantero / Starex Smile / CPL.
238 ELEC-1.7.45 1 No Supply of 32A DP Flush type of makes GM / Gold Medal / 62.05
Anchor / Great White/ Milltec / Vimal / Maru / Star.
1.8 MINI MODULAR SWITCHES AND ACCESSORIES
239 ELEC-1.8.1 1 No Supply of 6A 1 Way Mini Modular Switch with Cover Frame 16.79
of makes GM / Anchor / Million / Vimal / Gold Medal / Maru
/ CPL / Great White.
240 ELEC-1.8.2 1 No Supply of 6A 2 Way Mini Modular Switch with Cover Frame 18.98
241 ELEC-1.8.3 1 No Supply of 6A 2 Pin Mini Modular Socket with Cover Frame 17.52
242 ELEC-1.8.4 1 No Supply of 6A 3/2 Pin Mini Modular Socket with Cover 25.55
Frame of makes GM / Anchor / Million / Vimal / Gold Medal
/ Maru / CPL / Great White.
243 ELEC-1.8.5 1 No Supply of 6A Mini Modular Neon Indicator with Cover 20.44
244 ELEC-1.8.6 1 No Supply of 6A Mini Modular Bed Switch / Bell Push with 18.98
Cover Frame of makes GM / Anchor / Million / Vimal / Gold
Medal / Maru / CPL / Great White.
245 ELEC-1.8.7 1 No Supply of 6A 1 Way Mini Modular Switch with Neon 20.44
Indicator with Cover Frame of makes GM / Anchor / Million
/ Vimal / Gold Medal / Maru / CPL / Great White.
Page # 10
1 2 3 4 5
246 ELEC-1.8.8 1 No Supply of 6A Mini Modular Bell Push with Neon Indicator 28.47
with Cover Frame of makes GM / Anchor / Million / Vimal /
Gold Medal / Maru / CPL / Great White.
247 ELEC-1.8.9 1 No Supply of 16A Mini Modular Switch with Cover Frame of 58.4
makes GM / Anchor / Million / Vimal / Gold Medal / Maru /
CPL / Great White.
249 ELEC-1.8.11 1 No Supply of 16A (2 in one) Mini Modular Switch & Socket 80.3
combined with Cover Frame of makes GM / Anchor / Million
/ Vimal / Gold Medal / Maru / CPL / Great White.

251 ELEC-1.8.13 1 No Supply of 16A Triangle Top with Cover Frame of makes 35.77
GM / Anchor / Million / Vimal / Gold Medal / Maru / CPL /
Great White.
253 ELEC-1.8.15 1 No Supply of Mini Modular Stepped type Electronic Regulator 175.2
with Cover Frame of makes GM / Anchor / Million / Vimal /
Gold Medal / Maru / CPL / Great White.

256 ELEC-1.8.18 1 No Supply of Mini Modular Telephone Jack with Connector with 39.42
Cover Frame of makes GM / Anchor / Million / Vimal / Gold
Medal / Maru / CPL / Great White.
257 ELEC-1.8.19 1 No Supply of Mini Modular TV Antenna Outlet with Cover 25.55
258 ELEC-1.8.20 1 No Supply of 16A/10A Mini Modular Flush Fuse with Cover 29.2
1.9 MODULAR SWITCHES AND ACCESSORIES

259 ELEC-1.9.1 1 No Supply of 6A / 10A 1 Way 1 Module Modular Switch of GM 67.16
Four-Five / Legrand Arteor / Schneider Zen celo / MK
Blenge.
Blenge.
261 ELEC-1.9.3 1 No Supply of 6A / 10A 2 Pin 2 Module Modular Socket of GM 67.89
Blenge.
262 ELEC-1.9.4 1 No Supply of 6A / 10A 3/2 Pin 2 Module Modular Socket with 102.93
shutter of GM Four-Five / Legrand Arteor / Schneider Zen
celo / MK Blenge.
263 ELEC-1.9.5 1 No Supply of 6A / 10A 1 Module Modular Switch with Neon 85.41
Indicator of GM Four-Five / Legrand Arteor / Schneider Zen
celo / MK Blenge.
264 ELEC-1.9.6 1 No Supply of 6A / 10A Modular Bell Push with Neon Indicator 100.01
of GM Four-Five / Legrand Arteor / Schneider Zen celo / MK
Blenge.
265 ELEC-1.9.7 1 No Supply of 16A / 10A Modular Flush Fuse with Neon 91.98
celo / MK Blenge.
Page # 11
1 2 3 4 5
Blenge.
Blenge.
268 ELEC-1.9.10 1 No Supply of 20A 1 Way 1 Module Modular Switch with 100.74
celo / MK Blenge.
269 ELEC-1.9.11 1 No Supply of 20A Modular Socket with shutter of GM Four-Five 137.24
/ Legrand Arteor / Schneider Zen celo / MK Blenge.
270 ELEC-1.9.12 1 No Supply of 16A/6A 1 way Combi Socket Modular Socket with 143.08
shutter of GM Four-Five / Legrand Arteor / Schneider Zen
celo / MK Blenge.
271 ELEC-1.9.13 1 No Supply of 16A Triangle Top of GM Four-Five / Legrand 115.34
Arteor / Schneider Zen celo / MK Blenge.
272 ELEC-1.9.14 1 No Supply of 1 Module Modular type Electronic step type Fan 345.29
Regulator of GM Four-Five / Legrand Arteor / Schneider
Zen celo / MK Blenge.

274 ELEC-1.9.16 1 No Supply of Modular socket type Telephone jack with 73
Connector of GM Four-Five / Legrand Arteor / Schneider
Zen celo / MK Blenge.
275 ELEC-1.9.17 1 No Supply of Modular co-Axial socket type TV Antenna outlet 71.54
of GM Four-Five / Legrand Arteor / Schneider Zen celo /
MK Blenge.
276 ELEC-1.9.18 1 No Supply of 6A / 10A 1 Way 1 Module Modular Switch of 45.99
Legrand Myrius / Cabtree Thames Platinum / Million Logus /
Gold Medal Curve / Anchor Roma viola / CPL / Great white
Myrah / Fortune Art.

278 ELEC-1.9.20 1 No Supply of 6A / 10A 2 Pin 1 Module Modular Socket with 46.72
shutter of Legrand Myrius / Cabtree Thames Platinum /
Million Logus / Gold Medal Curve / Anchor Roma viola / CPL
/ Great white Myrah / Fortune Art.
279 ELEC-1.9.21 1 No Supply of 6A / 10A 3/2 Pin 2 Module Modular Socket with 67.89
shutter of Legrand Myrius / Cabtree Thames Platinum /
280 ELEC-1.9.22 1 No Supply of 6A / 10A 1 Module Modular Switch with Neon 54.75
Indicator of Legrand Myrius / Cabtree Thames Platinum /
Page # 12
1 2 3 4 5
281 ELEC-1.9.23 1 No Supply of 6A / 10A 1 Module Modular Bell Push with Neon 65.7
282 ELEC-1.9.24 1 No Supply of 16A / 10A 1 Module Modular Flush Fuse with 60.59
Neon Indicator of Legrand Myrius / Cabtree Thames
Platinum / Million Logus / Gold Medal Curve / Anchor Roma
viola / CPL / Great white Myrah / Fortune Art.
285 ELEC-1.9.27 1 No Supply of 20A 1 Way 1 Module Modular Switch with 66.43
286 ELEC-1.9.28 1 No Supply of 20A 2 Module Modular Socket with shutter of 97.09
287 ELEC-1.9.29 1 No Supply of 16A/6A 1 way 2 Module Combi Socket Modular 98.55
Socket with shutter of Legrand Myrius / Cabtree Thames
Platinum / Million Logus / Gold Medal Curve / Anchor Roma
viola / CPL / Great white Myrah / Fortune Art.
288 ELEC-1.9.30 1 No Supply of 16A Triangle Top of Legrand Myrius / Cabtree 47.45
Thames Platinum / Million Logus / Gold Medal Curve /
Anchor Roma viola / CPL / Great white Myrah / Fortune Art.

290 ELEC-1.9.32 1 No Supply of 1 Module Modular type Electronic step type Fan 273.75
Regulator of Legrand Myrius / Cabtree Thames Platinum /
291 ELEC-1.9.33 1 No Supply of Modular socket type Telephone jack with 47.45
Connector of Legrand Myrius / Cabtree Thames Platinum /
292 ELEC-1.9.34 1 No Supply of Modular co-Axial socket type TV Antenna outlet 46.72
of Legrand Myrius / Cabtree Thames Platinum / Million
Logus / Gold Medal Curve / Anchor Roma viola / CPL /
Great white Myrah / Fortune Art.
293 ELEC-1.9.35 1 No Supply of 1 or 2 Modular Cover Frame of GM Four-Five / 47.45

Legrand Arteor / Schneider Zen celo / MK Blenge.
Page # 13
1 2 3 4 5
294 ELEC-1.9.36 1 No Supply of 3 Modular Cover Frame of GM Four-Five / 56.21


297 ELEC-1.9.39 1 No Supply of 8 Modular Horizontal / Vertical Cover Frame of 125.56

GM Four-Five / Legrand Arteor / Schneider Zen celo / MK
Blenge.
298 ELEC-1.9.40 1 No Supply of 12 Modular Vertical Cover Frame of GM Four-Five 153.3
/ Legrand Arteor / Schneider Zen celo / MK Blenge.
299 ELEC-1.9.41 1 No Supply of 1 or 2 Modular Cover Frame of Legrand Myrius / 40.88

Cabtree Thames Platinum / Million Logus / Gold Medal
Curve / Anchor Roma viola / CPL / Great white Myrah /
Fortune Art.
300 ELEC-1.9.42 1 No Supply of 3 Modular Cover Frame of Legrand Myrius / 50.37
Fortune Art.
Fortune Art.
Fortune Art.
303 ELEC-1.9.45 1 No Supply of 8 Modular Horizontal / Vertical Cover Frame of 100.01
304 ELEC-1.9.46 1 No Supply of 12 Modular Vertical Cover Frame of Legrand 121.91

Myrius / Cabtree Thames Platinum / Million Logus / Gold
Medal Curve / Anchor Roma viola / CPL / Great white Myrah
/ Fortune Art.
SECTION - II
2.1 PANEL MOUNTING SWITCH DISCONNECTOR FUSE 0
UNITS
( SDFU ) AS PER IS: 13947
305 ELEC-2.1.1 1 No Supply of 32A TPN Switch Disconnector Fuse Unit Cubical 986.23
type without fuses of makes L&T / G E / C&S / ABB /
SIEMENS
type without fuses of makes L&T / G E / C&S / ABB /
SIEMENS
307 ELEC-2.1.3 1 No Supply of 125A TPN Switch Disconnector Fuse Unit 4071.94
Cubical type without fuses of makes L&T / G E / C&S / ABB
/ SIEMENS
/ SIEMENS
Page # 14
1 2 3 4 5
/ SIEMENS
/ SIEMENS
/ SIEMENS
type without fuses of makes Standard / Havells / HPL.
type without fuses of makes Standard / Havells / HPL.
Cubical type without fuses of makes Standard / Havells /
HPL.
HPL.
HPL.
HPL.
HPL.
2.2 ON LOAD CHANGEOVER SWITCHES
(OPEN EXECUTION)
AS PER IS:13947
319 ELEC-2.2.1 1 No Supply of 63A 4 Pole Change Over Switch on Load with 3018.55
open Execution of makes HPL Socomec / L & T

open Execution of makes ABB / GE / Siemens / Standard /
Havells.
Page # 15
1 2 3 4 5
Havells.
Havells.
Havells.
Havells.
Havells.
Havells.
2.3 OFF LOAD CHANGE OVER SWITCHES IN SS 0
ENCLOUSURE AS PER IS:13947
336 ELEC-2.3.1 1 No Supply of 32A 240V DP Off load Changeover Switch in 962.14
sheet steel enclosure of makes HPL / Havells / Standard.
337 ELEC-2.3.2 1 No Supply of 63A 415V FP Off load Changeover Switch in 3353.62
339 ELEC-2.3.4 1 No Supply of 32A 240V DP Off load Changeover Switch in 554.8
sheet steel enclosure of makes Million / Bentec / Gold
Medal / Star.
Medal / Star.
Medal / Star.
2.4 REWIRABLE / DOUBLE BREAK SWITCHES IN SS
ENCLOSURE
AS PER IS:13947
342 ELEC-2.4.1 1 No Supply of 32A 240V SPN Rewirable Fuse Switch in SS 683.28
enclosure of makes HPL / Havells / Standard
343 ELEC-2.4.2 1 No Supply of 32A 415V TPN Rewirable Fuse Switch in SS 1055.58
346 ELEC-2.4.5 1 No Supply of 100A 415V TPN Double Break Switch in SS 4518.7
enclosure without fuses of makes HPL / Havells / Standard
Page # 16
1 2 3 4 5
enclosure without fuses of makes HPL / Havells / Standard
348 ELEC-2.4.7 1 No Supply of 32A 240V SPN Rewirable Fuse Switch in SS 452.6
enclosure of makes GM / Million / Sputnik / Gold Medal /
Bentec / Star.
Bentec / Star.
Bentec / Star.
Bentec / Star.
enclosure without fuse of makes GM / Million / Sputnik /
Gold Medal / Bentec / Star.
enclosure without fuse of makes GM / Million / Sputnik /
Gold Medal / Bentec / Star.
2.5 HRC FUSE LINKS (BOLTED TYPE)
354 ELEC-2.5.1 1 No Supply of up to 32A HRC Fuse Links of makes L & T / G E / 36.5
C & S / Standard / HPL / Havells / Siemens.
355 ELEC-2.5.2 1 No Supply of 32A to 63A HRC Fuse Links of makes L & T / G 56.21
E / C & S / Standard / HPL / Havells / Siemens.
356 ELEC-2.5.3 1 No Supply of 125A to 200A HRC Fuse Links of makes L & T / 181.04
G E / C & S / Standard / HPL / Havells / Siemens.
357 ELEC-2.5.4 1 No Supply of 250A to 350A HRC Fuse Links of makes L & T / 264.99
G E / C & S / Standard / HPL / Havells / Siemens.
358 ELEC-2.5.5 1 No Supply of 400A HRC Fuse Links of makes L & T / G E / C & 513.92
S / Standard / HPL / Havells / Siemens.
359 ELEC-2.5.6 1 No Supply of 630A HRC Fuse Links of makes L & T / G E / C & 1040.25
S / Standard / HPL / Havells / Siemens.
2.6 PORCELAIN REWIRABLE FUSE UNITS.

360 ELEC-2.6.1 1 No Supply of 32A 240V Porcelain Rewirable Fuse Units of 72.27
makes GM / Sputnik / Million / Gold Medal / Vimal / Star /
Bentec.
Bentec.
Bentec.
Bentec.
364 ELEC-2.6.5 1 No Supply of 200A 415V Porcelain Rewirable Fuse Units with 650.43
extension strip of makes GM / Sputnik / Million / Gold Medal
/ Vimal / Star / Bentec.
Page # 17
1 2 3 4 5
365 ELEC-2.6.6 1 No Supply of 300A 415V Porcelain Rewirable Fuse Units with 862.86
extension strip of makes GM / Sputnik / Million / Gold Medal
/ Vimal / Star / Bentec.
2.7 VOLTAGE SURGE PROTECTORS 0
366 ELEC-2.7.1 1 No Supply of 2 Pole 2 Module 40 KA 1.4 KV Voltage Surge 5840
Protector of make Legrand / Siemens / Hager / G E.



2.8 PANEL MOUNTING MCCBs/ ACBs (Thermal Magnetic

Release)
370 ELEC-2.8.1 1 No Supply of 63A / 60A 3 Pole MCCB, Adjustable, Confirms to 4423.8
IS/IEC 60947-2 having Breaking Capacity 25 KA with
thermal magnetic release Panel Mounted of makes L&T /
Schneider / Siemens.
371 ELEC-2.8.2 1 No Supply of 125A 3 Pole MCCB, Adjustable, Confirms to 5251.62


IS/IEC 60947-2 having Breaking Capacity 36/35 KA with

374 ELEC-2.8.5 1 No Supply of 63A / 60A 4 Pole MCCB, Adjustable, Confirms to 4973.49
375 ELEC-2.8.6 1 No Supply of 125A 4 Pole MCCB, Adjustable, Confirms to 6351


thermal magnetic release Panel Mounted of makes L&T
(DN2-250N) / Schneider / Siemens / Hager

Page # 18
1 2 3 4 5
378 ELEC-2.8.9 1 No Supply of 63A / 60A 3 Pole MCCB / Confirms to IS/IEC 3087.17
60947-2 having Breaking Capacity 25 KA with thermal
magnetic release Panel Mounted of makes Legrand / GE /
ABB / Havells / HPL / Standard.
379 ELEC-2.8.10 1 No Supply of 125A 3 Pole MCCB / Confirms to IS/IEC 60947-2 3509.11
having Breaking Capacity 25 KA with thermal magnetic
release Panel Mounted of makes Legrand / GE / ABB /
Havells / HPL / Standard.
having Breaking Capacity 36/35 KA with thermal magnetic

382 ELEC-2.8.13 1 No Supply of 63A / 60A 4 Pole MCCB / Confirms to IS/IEC 4137.64
60947-2 having Breaking Capacity 25 KA with thermal
magnetic release Panel Mounted of makes Legrand / GE /
ABB / Havells / HPL / Standard.
PANEL MOUNTING ACBs (Microprocessor Based)
386 ELEC-2.8.17 1 No Supply of 630A 3 Pole, 50kA Air Circuit Breaker electrically 76244.12
fixed Confirms to IS 13947-2, IEC 60947-2 and BS-EN
60947 with Micro processer based having over load, shot
circuit and earth fault Protection of Siemens / L&T /
Schneider make.
Schneider make.
drawout Confirms to IS 13947-2, IEC 60947-2 and BS-EN
Schneider make.
Page # 19
1 2 3 4 5
Schneider make.
circuit and earth fault protection of makes Siemens / L&T /
Schneider make.
Schneider make.
Schneider make.
Schneider make.
394 ELEC-2.8.25 1 No Supply of 630A 3 Pole, 50kA Air Circuit Breaker electrically 68620
circuit and earth fault Protection of ABB / Legrand / HPL /
GE make.
GE make.
GE make.
GE make.
Page # 20
1 2 3 4 5
circuit and earth fault protection of makes ABB / Legrand /
HPL / GE make.
circuit and earth fault protection of makes ABB / Legrand /
HPL / GE make.
400 ELEC-2.8.31 1 No Supply, instalation, testing and commisioning of 800 Amp, 9729.44
50KA breaking capacity (100% Neutral busbar) air insulated
compact Raising mains system made of CRCA sheet steel
encloser of thickness not less than 1.5 mm having degree of
protection of IP 55 as per 2127. wall strapes, fully PVC
insulated four strip ALUMINIUM busbar in convinent
sections including , end feed unit, end cover units suitable
for 415 volts 3 phase, 4 wire, 50 Hz A.C. System,etc.,
Makes: Legrand / L&T / Seimens / Schiender / GE
401 ELEC-2.8.32 1 No Supply and Fixing of Spring suspension hanger for rising Main for 3931.05
400A / 800A Raising Mains. Makes: Legrand / L&T / Seimens /
Schiender / GE
402 ELEC-2.8.33 1 No Supply and Fixing of Suspension brackets for rising main for 400A 3405.45
/ 800A Raising Mains Makes: Legrand / L&T / Seimens /
Schiender / GE
403 ELEC-2.8.34 1 No Supply and Fixing of 800 Amps Horizontal / Vertical bends 25404
404 ELEC-2.8.35 1 No Supply and Fixing of Adopter box for 400A / 800A Raising Mains 10950
405 ELEC-2.8.36 1 No Supply and Fixing of 800 Amps Copper Flexibles for three phases 33981.5
and neutral Makes: Legrand / L&T / Seimens / Schiender / GE
406 ELEC-2.8.37 1 No Supply, instalation, testing and commisioning of 400 Amp, 50KA 7601.49
breaking capacity (100% Neutral busbar) air insulated compact
Raising mains system made of CRCA sheet steel encloser of
thickness not less than 1.5 mm having degree of protection of IP
55 as per 2127. wall strapes, fully PVC insulated four strip
ALUMINIUM busbar in convinent sections including required end
feed unit, end cover units suitable for 415 volts 3 phase, 4 wire,
50 Hz A.C. System,etc., Makes: Legrand / L&T / Seimens /
Schiender / GE
407 ELEC-2.8.38 1 No Supply and Fixing of 400 Amps Horizontal / Vertical bends 23907.5
Page # 21
1 2 3 4 5
408 ELEC-2.8.39 1 No Supply and Fixing of 400 Amps Copper Flexibles for three phases 29820.5
and neutral Makes: Legrand / L&T / Seimens / Schiender / GE
409 ELEC-2.8.40 1 No Supply and Fixing of 400 Amps Tap off box Makes: Legrand / 32521.5
L&T / Seimens / Schiender / GE
410 ELEC-2.8.41 1 No Supply and Fixing of 250 Amps Tap off box Makes: Legrand / 30368
L&T / Seimens / Schiender / GE
411 ELEC-2.8.42 1 No Supply and Fixing of 250 Amps TPN 36KA DPX250-ER MCCB for 12098.29
tap off boxes for power supply Makes: Legrand / L&T / Seimens /
Schiender / GE
2.9 MCBs (AS PER IS:60898-1:2002)
412 ELEC-2.9.1 1 No Supply of 6-32A 10KA SP MCB, C/D Curve ISI Mark of 146.73
make Legrand / Schneider.
414 ELEC-2.9.3 1 No Supply of 6-32A 10KA DP MCB, C/D Curve ISI Mark of 434.35
416 ELEC-2.9.5 1 No Supply of 6-32A 10KA TP MCB, C/D Curve ISI Mark of 697.15
418 ELEC-2.9.7 1 No Supply of 6-32A 10KA FP MCB, C/D Curve ISI Mark of 935.13
419 ELEC-2.9.8 1 No Supply of 40-63A FP MCB, C/D Curve ISI Mark of make 1386.27
Legrand / Schneider.
make Siemens / GE / ABB / GM / Standard / Havells / HPL /
Hager.
Hager.
Hager.
Hager.
Hager.
Hager.
Hager.
427 ELEC-2.9.16 1 No Supply of 40 - 63A 10KA FP MCB, C/D Curve ISI Mark of 1039.52
Hager.
make Gold Medal / Milltec / Sputnik / Bentec.
Page # 22
1 2 3 4 5
431 ELEC-2.9.20 1 No Supply of 40-63A 10KA DP MCB, C/D Curve ISI Mark C- 365.73
Curve of make Gold Medal / Milltec / Sputnik / Bentec.
433 ELEC-2.9.22 1 No Supply of 40 - 63A 10KA TP MCB, C/D Curve ISI Mark of 689.85
435 ELEC-2.9.24 1 No Supply of 40 - 63A 10KA FP MCB, C/D Curve ISI Mark of 811.76
2.10 ISOLATORS CONFIRMS TO I E C 60947 PART-III
436 ELEC-2.10.1 1 No Supply of 32A DP Isolator of make Legrand / Schneider. 246.74
439 ELEC-2.10.4 1 No Supply of 40A TP Isolator of make Legrand / Schneider. 455.52
440 ELEC-2.10.5 1 No Supply of 63A TP Isolator of make Legrand / Schneider. 529.25
441 ELEC-2.10.6 1 No Supply of 40A FP Isolator of make Legrand / Schneider. 594.22

445 ELEC-2.10.10 1 No Supply of 32A DP Isolator of make Siemens / GE / ABB / 232.14

GM / Standard / Havells / HPL / Hager.


448 ELEC-2.10.13 1 No Supply of 40A TP Isolator of make Siemens / GE / ABB / 427.05

449 ELEC-2.10.14 1 No Supply of 63A TP Isolator of make Siemens / GE / ABB / 430.7

450 ELEC-2.10.15 1 No Supply of 40A FP Isolator of make Siemens / GE / ABB / 494.94


Page # 23
1 2 3 4 5
454 ELEC-2.10.19 1 No Supply of 32A DP Isolator of make Gold Medal / Milltec / 156.95
Sputnik / Bentec.
Sputnik / Bentec.
Sputnik / Bentec.
457 ELEC-2.10.22 1 No Supply of 40A TP Isolator of make Gold Medal / Milltec / 279.59
Sputnik / Bentec.
458 ELEC-2.10.23 1 No Supply of 63A TP Isolator of make Gold Medal / Milltec / 312.44
Sputnik / Bentec.
459 ELEC-2.10.24 1 No Supply of 40A FP Isolator of make Gold Medal / Milltec / 417.56
Sputnik / Bentec.
2.11 RCCBs CONFIRMS TO
IEC:61008 AND IS:12640
463 ELEC-2.11.1 1 No Supply of 40A 2 Pole RCCB 30mA, of makes Legrand / 1971
Schneider.
Schneider.
Schneider.
466 ELEC-2.11.4 1 No Supply of 63A 2 Pole RCCB 100mA, of makes Legrand / 2430.9
Schneider.
Schneider.
Schneider.
Schneider.
Schneider.
471 ELEC-2.11.9 1 No Supply of 40A 2 Pole RCCB 30mA, of makes Siemens / 1570.96
GE / ABB / GM / Standard / Havells / HPL / Hager.
Page # 24
1 2 3 4 5

487 ELEC-2.11.25 1 No Supply of MCB type Change Over Switch 20A Double Pole 1372.4
2 way 400V AC suitable to fix on Din Channel of makes
2.12 MCB DISTRIBUTION BOARDS
(AS PER IS:13032)
488 ELEC-2.12.1 1 Supply of 4 Way SPN DB with IP 20 Protection as per 554.8
IS:13032 and suitable for 4Nos S.P out goings and for 1 No
Incommer etc complete of makes Legrand / Schneider.
489 ELEC-2.12.2 1 Supply of 8 Way SPN DB with IP 20 Protection as per 642.4

490 ELEC-2.12.3 1 No Supply of 12 Way SPN DB with IP 20 Protection as per 762.85

IS:13032 and suitable for 12Nos S.P out goings and for 1
No Incommer etc complete of makes Legrand / Schneider.



IS:13032 and suitable for 12Nos S.P out goings and for 1
No Incommer etc complete of makes Legrand / Schneider.

Incommer etc complete of makes Siemens / GE / ABB / GM
/ Standard / Havells / HPL / Hager.

IS:13032 and suitable for 8 Nos S.P out goings and for 1 No

IS:13032 and suitable for 12 Nos S.P out goings and for 1
No Incommer etc complete of makes Siemens / GE / ABB /
Page # 25
1 2 3 4 5
497 ELEC-2.12.10 1 No Supply of 4 Way SPN DB with IP 43 Protection as per 584
Incommer etc completeof makes Siemens / GE / ABB / GM


No Incommer etc complete of makes Siemens / GE / ABB /

Incommer etc complete of makes Gold Medal / Milltec /
Sputnik / Bentec.
Sputnik / Bentec.
No Incommer etc complete of makes Gold Medal / Milltec /
Sputnik / Bentec.
Sputnik / Bentec.
Sputnik / Bentec.
No Incommer etc complete of makes Gold Medal / Milltec /
Sputnik / Bentec.
506 ELEC-2.12.19 1 No Supply of 4 Way TPN DB Horizontal with IP 20 Protection as 1095
per IS:13032 and suitable for 12 Nos S.P. out goings and for
1 No 4 pole Incommer etc complete of makes Legrand /
Schneider.

Schneider.
508 ELEC-2.12.21 1 No Supply of 12 Way TPN DB Horizontal with IP 20 Protection 3069.65

as per IS:13032 and suitable for 36 Nos S.P. out goings and
for 1 No 4 pole Incommer etc complete of makes Legrand /
Schneider.
Page # 26
1 2 3 4 5
509 ELEC-2.12.22 1 No Supply of 4 Way TPN DB Horizontal with IP 43 Protection as 1818.43
Schneider.

Schneider.
511 ELEC-2.12.24 1 No Supply of 12 Way TPN DB Horizontal with IP 43 Protection 3963.17

for 1 No 4 pole Incommer etc complete of makes Legrand /
Schneider.
512 ELEC-2.12.25 1 No Supply of 4 Way VTPN DB with IP 20 Protection as per 3741.25

IS:13032 and suitable for TP/SP out goings and for 1 No 4
pole Incommer etc complete of makes Legrand /
Schneider.
Schneider.
Schneider.
515 ELEC-2.12.28 1 No Supply of 4 Way VTPN DB suitable for accommodating 4 4412.85
pole incomer with IP 43 Protection as per IS:13032 and
suitable for TP/SP out goings etc complete of makes
516 ELEC-2.12.29 1 No Supply of 6 Way VTPN DB suitable for accommodating 4 5110


suitable for 8 Nos T.P. out goings etc complete of makes

519 ELEC-2.12.32 1 No Supply of 7 Segment 4 Way TPN DB with IP 42 Protection 4745

with provision for FPMCB / Isolator / RCCB / RCBO as
incomer, 3Nos DPMCB / Isolator / RCCB / RCBO as sub
incomer and 12 Nos SPMCB's as out going of makes
Page # 27
1 2 3 4 5
incomer and 24Nos SPMCB's as out going of makes
521 ELEC-2.12.34 1 No Supply of 4 Way VTPN DB suitable for accomodating 125A / 5725.39
160A 4 Pole MCCB as incomer and 4 Nos TP MCBs as
outgoing and with IP 43 Protection of makes Legrand /
Schneider.
522 ELEC-2.12.35 1 No Supply of 8 Way VTPN DB suitable for accomodating 125A / 7170.79
160A 4 Pole MCCB as incomer and 8 Nos TP MCBs as
outgoing and with IP 43 Protection of makes Legrand /
Schneider.
523 ELEC-2.12.36 1 No Supply of 20A SP Plug and Socket in SS enclosure of 657.73

makes Legrand / Schneider.
524 ELEC-2.12.37 1 No Supply of 20A TP Plug and Socket in SS enclosure of 1397.95
1 No 4 pole Incommer etc complete of makes Siemens /

528 ELEC-2.12.41 1 No Supply of 12 Way TPN DB Horizontal with IP 20 Protection 2190

for 1 No 4 pole Incommer etc complete of makes Siemens
/ GE / ABB / GM / Standard / Havells / HPL / Hager.

1 No 4 pole Incommer etc complete of makesSiemens /


for 1 No 4 pole Incommer etc complete of makes Siemens
/ GE / ABB / GM / Standard / Havells / HPL / Hager.
532 ELEC-2.12.45 1 No Supply of 4 Way VTPN DB with IP 20 Protection as per 2774

pole Incommer etc complete of makes Siemens / GE / ABB
/ GM / Standard / Havells / HPL / Hager.
Page # 28
1 2 3 4 5
pole Incommer etc complete of makes Siemens / GE / ABB
534 ELEC-2.12.47 1 No Supply of 12 Way VTPN DB with IP 20 Protection as per 4964

pole Incommer etc complete of makesSiemens / GE / ABB

Siemens / GE / ABB / GM / Standard / Havells / HPL /
Hager.

Hager.

Hager.

Hager.

incomer and 12 Nos SPMCB's as out going of makes
Hager.
540 ELEC-2.12.53 1 No Supply of 7 Segment 8 Way TPN DB with IP 42 Protection 496.4

incomer and 24Nos SPMCB's as out going of makes
Hager.

per IS:13032 and suitable for 12Nos S.P. out goings and for
1 No 4 pole Incommer etc complete of makes Gold Medal /
Milltec / Sputnik / Bentec.
Page # 29
1 2 3 4 5
1 No 4 pole Incommer etc completeof makes Gold Medal /

as per IS:13032 and suitable for 36Nos S.P. out goings and
for 1 No 4 pole Incommer etc complete of makes Gold
Medal / Milltec / Sputnik / Bentec.




for 1 No 4 pole Incommer etc complete of makes Gold
Medal / Milltec / Sputnik / Bentec.

pole Isolator as incomer with IP 20 Protection as per
IS:13032 and suitable for 4 Nos T.P. out goings etc
complete of makes Gold Medal / Milltec / Sputnik / Bentec.

IS:13032 and suitable for 6 Nos T.P. out goings and for 1
No 4 pole Incommer etc complete of makes Gold Medal /



Page # 30
1 2 3 4 5
556 ELEC-2.12.69 1 No Supply of 20A SP Plug and Socket in SS enclosure of 430.7

makes Gold Medal / Milltec / Sputnik / Bentec.

558 ELEC-2.12.71 1 No Supply of 32A TP Plug and Socket in SS enclosure of 949

559 ELEC-2.12.72 1 No Supply of SP Enclosure with IP 20 Protection of makes 182.5

560 ELEC-2.12.73 1 No Supply of DP/TP/FP Metal Enclosure with IP 20 Protection 267.18
of makes Legrand / Schneider.
SECTION - 3
STREET LIGHT LUMINAIRES
561 ELEC-3.1.1 1 No Supply of 1 x 36/40 W fluorescent street light luminaire with 1022
sheet alluminium housing and UV stabilised acrylic cover
with Electronic ballast and all standard accessories etc of
makes Wipro / G.E. / Phillips.
makes Crompton / Bajaj / HPL / Surya / Havells / Pierlite.
makes Elton / Style Lamp / Mahita Electro / Capart / Akhil.
564 ELEC-3.1.4 1 No Deleted SOR 11-12 (ELEC-12-13-3.1.4)

570 ELEC-3.1.10 1 No Supply of 70W SV / MH Street light luminaire integral with 2648.44
pressure diecast alluminium housing having pot optics with
IP66 protection with all standard accessories etc of makes
Wipro / G.E. / Phillips / Bajaj / Crompton / Havells.
HPL / Surya / Venture / Pierlite.
Elton / Style Lamp / Mahita Electro / Capart / Akhil.
Page # 31
1 2 3 4 5
HPL / Surya / Venture / Pierlite..
579 ELEC-3.1.19 1 No Supply of 150W MH Flood light luminaire with integral 3924.48
weather proof diecast alluminium housing with IP66
protection with all standard accessories etc of makes Wipro
/ G.E. / Phillips / Bajaj / Crompton / Havells.
protection with all standard accessories etc of makes HPL /
Surya / Venture / Pierlite.
protection with all standard accessories etc of makes Elton
/ Style Lamp / Mahita Electro / Capart / Akhil.
Page # 32
1 2 3 4 5
protection with all standard accessories etc of makes Elton
/ Style Lamp / Mahita Electro / Capart / Akhil.

588 ELEC-3.1.28 1 No Supply of 250W MH Flood light luminaire with Non - integral 5504.2
protection with Control Gear Box without lamp of makes
591 ELEC-3.1.31 1 No Supply of 2 x 250W MH Flood light luminaire with Non - 10629.53
integral weather proof diecast alluminium housing with IP66
Page # 33
1 2 3 4 5
598 ELEC-3.1.38 1 No Supply of 500W Hallozen Flood light luminaire with cast 519.03
alluminium housing and tough end glass cover with all
standard accessories of makes Wipro / G.E. / Phillips / Bajaj
/ Crompton / Havells.
standard accessories of makes HPL / Surya / Venture /
Pierlite.
standard accessories of makes Elton / Style Lamp / Mahita
Electro / Capart / Akhil.
standard accessories of makes Wipro / G.E. / Phillips / Bajaj
/ Crompton / Havells.
standard accessories of makes HPL / Surya / Venture /
Pierlite.
standard accessories of makes Elton / Style Lamp / Mahita
Electro / Capart / Akhil.

608 ELEC-3.1.48 1 No Supply of 1 x 26W CFL well glass, low bay luminaire with 1642.5
die cast alluminium housing epoxy gray powder coated built
in Electronic ballast with gink plated wire guard and eye bolt
of make Wipro / G.E. / Phillips / Bajaj / Crompton / Havells.

POST TOP LANTERN LUMINAIRES
610 ELEC-3.2.1 1 No Supply of 1 x 18W CFL integral post top luminaire with 1341.74
conical shape, opal clear acrylic diffuser with cast
alluminium pole mounting capsule complete with all
accessories and ballast of makes Crompton / Bajaj / Surya /
Havells / HPL.
Page # 34
1 2 3 4 5
612 ELEC-3.2.3 1 No Supply of 70W SV / MH integral HID lamp post top lantern 2790.06
BJDPTI 70SV / MH LPF or its equivalent with diamond /
Mushroom / Spherical diffuser etc complete with all
accessories of makes Wipro / Phillips / Bajaj / Crompton /
Surya / HPL / Pierlite / Havells.
ACCESSORIES FOR MV / SV / MH LUMINAIRES
COPPER BALLASTS
613 ELEC-3.3.1 1 No Supply of 80W MV copper ballast of makes G.E. / Phillips / 517.57
Crompton / Bajaj / Surya / Havells / Venture / Pierlite.
614 ELEC-3.3.2 1 No Supply of 80W MV copper ballast of makes RK / Style Lamp 469.39
/ Akhil / Capart.
615 ELEC-3.3.3 1 No Supply of 125W MV copper ballast of makes G.E. / Phillips / 565.75
Crompton / Bajaj / Surya / Havells / Venture / Pierlite.
616 ELEC-3.3.4 1 No Supply of 125W MV copper ballast of makes RK / Style 475.96

Lamp / Akhil / Capart.
617 ELEC-3.3.5 1 No Supply of 70 W SV / MH copper ballast of makes Wipro / 551.88
G.E. / Phillips.
618 ELEC-3.3.6 1 No Supply of 70 W SV / MH copper ballast of makes Crompton 469.39
/ Bajaj / Surya / HPL / Havells / Venture / Pierlite.
619 ELEC-3.3.7 1 No Supply of 70 W SV / MH copper ballast of makes RK / Style 448.95

Lamp / Akhil / Capart.
G.E. / Phillips.
621 ELEC-3.3.9 1 No Supply of 150 W SV / MH copper ballast of makes 733.65
Crompton / Bajaj / Surya / HPL / Havells / Venture / Pierlite.
622 ELEC-3.3.10 1 No Supply of 150 W SV / MH copper ballast of makes RK / 658.46

Style Lamp / Akhil / Capart.
G.E. / Phillips.

G.E. / Phillips.

629 ELEC-3.3.17 1 No Supply of Ignitor for SV / MH Lamp of makes Wipro / G.E. / 131.4
Phillips / Crompton / Bajaj / Surya / HPL / Havells / Venture /
Pierlite.
630 ELEC-3.3.18 1 No Supply of 4 mfd HPF Capacitor of makes Wipro / G.E. / 87.6
Phillips make
631 ELEC-3.3.19 1 No Supply of 4 mfd HPF Capacitor of makes Crompton / Bajaj / 73.73
Surya / Havells.
633 ELEC-3.3.21 1 No Supply of 10 mfd HPF Capacitor of makes Wipro / G.E. / 146
Phillips make
Page # 35
1 2 3 4 5
634 ELEC-3.3.22 1 No Supply of 10 mfd HPF Capacitor of makes Crompton / Bajaj 124.83
/ Surya / Havells.
Phillips make
/ Surya / Havells.
Phillips make
/ Surya / Havells.
Phillips make
/ Surya / Havells.
Phillips make
/ Surya / Havells.
ENEGRY SAVING ELECTRONIC BALLAST FOR STREET 0
LIGHT
648 ELEC-3.3.36 1 No Supply of 70W SV / MH Electronic ballast having < 3W 2450
loss, PF > 0.90, THD < 15% with 3 years guarantee of
makes Phillips / Whipro / Trinic / GE.


651 ELEC-3.3.39 1 No Supply of 400W SV / MH Electronic ballasthaving < 3W 5400

BALLASTS FOR INDUCTION LAMPS 0

652 ELEC-3.3.40 Supply of 40W ballasts for Induction Lamp of Makes LVD- 5000
RAES / Crompton / Bajaj / Surya / Synergy Solutions /
Fortune Art / Billion Light.
653 ELEC-3.3.41 1 No Supply of 80W ballasts for Induction Lamp of Makes LVD- 5500
Page # 36
1 2 3 4 5
657 ELEC-3.3.45 Supply of 400W ballasts for Induction Lamp of Makes LVD- 16000
LAMPS
658 ELEC-3.4.1 1 No Supply of 500W Hallozen Lamp with ISI mark of makes 78.84
Wipro / G.E. / Phillips / Osram.
Crompton / Bajaj / Surya / HPL / Havells / Pierlite.
Elton / Style Lamp / Mahita Electro / Capart
Wipro / G.E. / Phillips / Osram.
662 ELEC-3.4.5 1 No Supply of 1000W Hallozen Lamp with ISI mark of makes 73
Elton / Style Lamp / Mahita Electro / Capart
664 ELEC-3.4.7 1 No Supply of 70W SV Lamp with ISI mark of makes Wipro / 361.35
G.E. / Phillips / Osram.
665 ELEC-3.4.8 1 No Supply of 70W SV Lamp with ISI mark of makes Crompton / 328.5
Bajaj / Surya / HPL / Havells / Venture / Pierlite.
666 ELEC-3.4.9 1 No Supply of 70W SV Lamp with ISI mark of makes Elton / 292
Style Lamp / Mahita Electro / Capart
668 ELEC-3.4.11 1 No Supply of 150W SV Lamp with ISI mark of makes Crompton 474.5
669 ELEC-3.4.12 1 No Supply of 150W SV Lamp with ISI mark of makes Elton / 438
671 ELEC-3.4.14 1 No Supply of 250W SV Lamp with ISI mark of makes Crompton 525.6
672 ELEC-3.4.15 1 No Supply of 250W SV Lamp with ISI mark of makes Elton / 496.4
674 ELEC-3.4.17 1 No Supply of 400W SV Lamp with ISI mark of makes Crompton 584
675 ELEC-3.4.18 1 No Supply of 400W SV Lamp with ISI mark of makes Elton / 569.4
676 ELEC-3.4.19 1 No Supply of 70W double end MH Lamp with ISI mark of 441.65
makes Wipro / G.E. / Phillips / Osram.
makes Crompton / Bajaj / Surya / HPL / Havells / Pierlite.
Page # 37
1 2 3 4 5
makes Elton / Style Lamp / Mahita Electro / Capart
679 ELEC-3.4.22 1 No Supply of 150W double end MH Lamp with ISI mark of 657
makes Wipro / G.E. / Phillips / Osram.
680 ELEC-3.4.23 1 No Supply of 150W double end MH Lamp with ISI mark of
makes Crompton / Bajaj / Surya / HPL / Havells / Pierlite.
681 ELEC-3.4.24 1 No Supply of 150W double end MH Lamp with ISI mark of 584
makes Elton / Style Lamp / Mahita Electro / Capart

683 ELEC-3.4.26 1 No Supply of 70W MH Lamp with ISI mark of makes Crompton 649.7
/ Bajaj / Surya / HPL / Havells / Pierlite.
684 ELEC-3.4.27 1 No Supply of 70W MH Lamp with ISI mark of makes Elton / 620.5
685 ELEC-3.4.28 1 No Supply of 150W MH Lamp with ISI mark of makes Wipro / 722.7
686 ELEC-3.4.29 1 No Supply of 150W MH Lamp with ISI mark of makes 693.5
687 ELEC-3.4.30 1 No Supply of 150W MH Lamp with ISI mark of makes Elton / 657
689 ELEC-3.4.32 1 No Supply of 250W MH Lamp with ISI mark of makes 876
692 ELEC-3.4.35 1 No Supply of 400W MH Lamp with ISI mark of makes 1058.5
694 ELEC-3.4.37 1 No Supply of 80W MV Lamp with ISI mark of makes Wipro / 131.4
695 ELEC-3.4.38 1 No Supply of 80W MV Lamp with ISI mark of makes Crompton 116.8
/ Bajaj / Surya / HPL / Havells / Pierlite.
696 ELEC-3.4.39 1 No Supply of 80W MV Lamp with ISI mark of makes Elton / 102.2
698 ELEC-3.4.41 1 No Supply of 125W MV Lamp with ISI mark of makes 124.1
699 ELEC-3.4.42 1 No Supply of 125W MV Lamp with ISI mark of makes Elton / 109.5
Page # 38
1 2 3 4 5
702 ELEC-3.4.45 1 No Supply of 250W MV Lamp with ISI mark of makes Elton / 292
705 ELEC-3.4.48 1 No Supply of 400W MV Lamp with ISI mark of makes Elton / 438

NATURE SWITCHES
709 ELEC-3.5.1 1 No Supply of Swadeep Nature Switch or its equivalent with 8233.5
suitable SMC enclousure, MCBs contactor suitable to
control the load of 3 KW of single phase load.
control the load of 5 KW of Three phase load.
INTERNAL LUMINAIRES 0
715 ELEC-3.6.1 1 No Supply of 1 x 11W Mirror light with all standard accessories 559.35
diffuser of makes G.E. / Phillips / Crompton / Bajaj.
716 ELEC-3.6.2 1 No Supply of 1 x 11W Mirror light with all standard accessories 476.85
diffuser of makes Surya / Havells / HPL / Fortune Art

719 ELEC-3.6.5 1 No Supply of 1 x 36/40W Box type tube light luminaire powder 494.175
coated CRCA sheet steel housing with VPIT Chokes and all
standard accessories of makes Crompton / Bajaj / Surya /
Havells / HPL.
Page # 39
1 2 3 4 5
coated CRCA sheet steel housing with Electronic Ballast
Chokes and all standard accessoriesof makes Wipro / G.E.
/ Phillips / Crompton / Bajaj.
Chokes and all standard accessoriesof makes Surya /
Havells / HPL / Fortune Art.

Chokes and all standard accessoriesof makes Wipro / G.E.
Chokes and all standard accessoriesof makes Surya /
Havells / HPL / Fortune Art.

731 ELEC-3.6.17 1 No Supply of 1 x 36/40W Patty type tube light luminaire powder 225.225
coated CRCA sheet steel housing with Copper Chokes and
all standard accessories of makes Crompton / Bajaj / Surya
/ Havells / HPL.
732 ELEC-3.6.18 1 No Supply of 1 x 36/40W Patty type tube light luminaire powder 190.575
coated CRCA sheet steel housing with Copper Chokes and
all standard accessories of makes Elton / RK / Million / Gold
Medal / Vimal / Akhil.

742 ELEC-3.6.28 1 No Supply of 2 x 36/40W Surface / Recessed mounting mirror 2139.6375
optic luminaire with powder coated CRCA sheet steel
housing with alluminium mirror reflector and decorative end
plates with Electronic Ballast of makes Wipro / G.E. /
Phillips / Crompton.
743 ELEC-3.6.29 1 No Supply of 2 x 36/40W Surface / Recessed mounting mirror 1954.59

optic luminaire with powder coated CRCA sheet steel
housing with alluminium mirror reflector and decorative end
plates with Electronic Ballast, of makes Bajaj / Surya / HPL /
Havells.
Page # 40
1 2 3 4 5
753 ELEC-3.6.39 1 No Supply of 2 x 36W CFL Paralite louvre (P5) Surface / 3479.85
Recessed low glare Mirror Optic luminaire comprising bright
anodised alluminium reflector with Electronic Ballst of
makes Wipro / G.E. / Phillips / Crompton / Bajaj.
754 ELEC-3.6.40 1 No Supply of 2 x 36W CFL Paralite louvre (P5) Surface / 2761.275
Recessed low glare Mirror Optic luminaire comprising bright
anodised alluminium reflector with Electronic Ballst of
makes Surya / Havells / HPL / Pierlite.

757 ELEC-3.6.43 1 No Supply of 2 x 36W CFL Direct / Indirect Recessed low glare 3092.925
Mirror Optic luminaire comprising bright anodised
alluminium reflector with Electronic Ballst of makes Wipro /
G.E. / Phillips / Crompton / Bajaj.
758 ELEC-3.6.44 1 No Supply of 2 x 36W CFL Direct / Indirect Recessed low glare 2393.325
Mirror Optic luminaire comprising bright anodised
alluminium reflector with Electronic Ballst of makes Surya /
Havells / Trinic / HPL / Pierlite.

761 ELEC-3.6.47 1 No Supply of 1 x 13/18W CFL Indoor recessed mounting 740.85
horizontal type down lights luminaire with alluminium/Matt
finished reflecttor with Electronic Ballast of makes Wipro /

finished reflecttor with Electronic Ballast of makes Pierlite /
Surya / Havells / HPL / Fortune Art.

finished reflecttor with Electronic Ballast of makes Wipro /

finished reflecttor with Electronic Ballast of makes Pierlite /

horizontal type down lights luminaire with Frosted glass
cover reflecttor with Electronic Ballast of makes Wipro /
Page # 41
1 2 3 4 5
cover reflecttor with Electronic Ballast of makes Pierlite /

cover reflecttor with Electronic Ballast of makes Wipro /

cover reflecttor with Electronic Ballast of makes Pierlite /

771 ELEC-3.6.57 1 No Supply of Recessed mounting 12V 50W adjustable Halozen 611.325
down light with white colour gold shade including
transformer Wipro / G.E. / Phillips / Crompton / Bajaj.
772 ELEC-3.6.58 1 No Supply of Recessed mounting 12V 50W adjustable Halozen 550.275
transformer of make Pierlite / Surya / Havells / HPL /
Fortune Art.
773 ELEC-3.6.59 1 No Supply of Recessed mounting 12V 50W zoom type Halozen 806.85
transformer of makes Wipro / G.E. / Phillips / Crompton /
Bajaj.
774 ELEC-3.6.60 1 No Supply of Recessed mounting 12V 50W zoom type Halozen 724.35
transformer of makes Surya / Havells.
775 ELEC-3.6.61 1 No Supply of 9/13W VPIT Ballast for CFL with ISI mark of 140
makes Wipro / G.E. / Phillips / Crompton / Bajaj.
makes Surya / Havells / HPL / Fortune Art.
makes Elton / RK / Style Lamp / Mahita Electro / Capart
778 ELEC-3.6.64 1 No Supply of 18W VPIT Ballast for CFL with ISI mark of makes 140
Wipro / G.E. / Phillips / Crompton / Bajaj.
Elton / RK / Style Lamp / Mahita Electro / Capart
781 ELEC-3.6.67 1 No Supply of 20W Copper Wound Ballast of makes Wipro / 180
782 ELEC-3.6.68 1 No Supply of 20W Copper Wound Ballast of makes Surya / 160
Havells / HPL / Fortune Art
Page # 42
1 2 3 4 5
783 ELEC-3.6.69 1 No Supply of 20W Copper Wound Ballast of makes Elton / RK 146
/ Ballast Makers / Krishilite / Style Lamp / Akhil / Capart /
Million / Gold Medal / Vimal.
784 ELEC-3.6.70 1 No Supply of 40W Copper Wound Ballast of makes Wipro / 180
785 ELEC-3.6.71 1 No Supply of 40W Copper Wound Ballast of makes Surya / 160
786 ELEC-3.6.72 1 No Supply of 40W Copper Wound Ballast of makes Elton / RK 145
/ Ballast Makers / Krishilite / Style Lamp / Akhil / Capart /
Million / Gold Medal / Vimal.
787 ELEC-3.6.73 1 No Supply of 18/20W VPIT Ballast Wipro / G.E. / Phillips / 180
Crompton / Bajaj.
788 ELEC-3.6.74 1 No Supply of 18/20W VPIT Ballast Surya / Havells / HPL / 160
Fortune Art
789 ELEC-3.6.75 1 No Supply of 18/20W VPIT Ballast Elton / RK / Style Lamp / 145
Mahita Electro / Capart
790 ELEC-3.6.76 1 No Supply of 36/40W VPIT Ballast Wipro / G.E. / Phillips / 210
Crompton / Bajaj.
791 ELEC-3.6.77 1 No Supply of 36/40W VPIT Ballast Surya / Havells / HPL / 180
Fortune Art
792 ELEC-3.6.78 1 No Supply of 36/40W VPIT Ballast Elton / RK / Style Lamp / 170
Mahita Electro / Capart / Million / Gold Medal / Vimal.
793 ELEC-3.6.79 1 No Supply of 40W Starter of makes Wipro / G.E. / Phillips / 11

Crompton / Bajaj.
794 ELEC-3.6.80 1 No Supply of 40W Starter of makes Surya / Havells / HPL / 9
Fortune Art
795 ELEC-3.6.81 1 No Supply of 40W Starter of makes Elton / RK / Style Lamp / 8
Mahita Electro / Capart / Million / Gold Medal / Vimal.
796 ELEC-3.6.82 1 No Supply of Rotor holder(FTL) of makes Wipro / G.E. / Phillips 21

/ Crompton / Bajaj.
797 ELEC-3.6.83 1 No Supply of Rotor holder(FTL) of makes Surya / Havells / 19
HPL / Fortune Art
798 ELEC-3.6.84 1 No Supply of Rotor holder(FTL) of makes Elton / RK / Style 17
Lamp / Mahita Electro / Capart / Million / Gold Medal /
Vimal.
799 ELEC-3.6.85 1 No Supply of HID Lamp holder of makes Wipro / G.E. / Phillips / 53
Crompton / Bajaj.
800 ELEC-3.6.86 1 No Supply of HID Lamp holder of makes Surya / Havells / HPL 48
/ Fortune Art
801 ELEC-3.6.87 1 No Supply of HID Lamp holder of makes Elton / RK / Style 42
Lamp / Mahita Electro / Capart
802 ELEC-3.6.88 1 No Supply of CFL holder of makes Wipro / G.E. / Phillips / 32
Crompton / Bajaj.
803 ELEC-3.6.89 1 No Supply of CFL holder of makes Surya / Havells / HPL / 27
Fortune Art
804 ELEC-3.6.90 1 No Supply of CFL holder of makes Elton / RK / Style Lamp / 25
805 ELEC-3.6.91 1 No Supply of FTL Starter holder of makes Wipro / G.E. / Phillips 15
/ Crompton / Bajaj.
806 ELEC-3.6.92 1 No Supply of FTL Starter holder of makes Surya / Havells. 13
807 ELEC-3.6.93 1 No Supply of FTL Starter holder of makes Elton / RK / Style 12

Lamp / Mahita Electro / Capart / Million / Gold Medal / Vimal.
Page # 43
1 2 3 4 5
808 ELEC-3.6.94 1 No Supply of 36W Electronic Ballast with total hormonic 693
distortion is less than 10% for FTL of makes Wipro / G.E. /
Phillips / Crompton / Bajaj.
809 ELEC-3.6.95 1 No Supply of 36W Electronic Ballast with total hormonic 614
distortion is less than 10% for FTL of makes Surya / HPL /
Havells.
811 ELEC-3.6.97 Supply of 36W Electronic ballast with power factor greater 275
than 0.9 to 0.95 suitable for FTL. Make : Crompton Model
No.EBN 136D / Bajaj Model No.BJHF 136 / Havells LHBF
27904025 or its equivalent.
812 ELEC-3.6.98 Supply of 2 x 36/40W Industrial Box type tube light luminaire 1615
powder coated CRCA sheet steel housing with Reflector
and Electronic ballast and all standard accessories of
makes Crompton / Bajaj / Surya / HPL / Havells.
813 ELEC-3.6.99 Supply of 4 x 14W TL 5 high efficiency recessed luminaire, 5310

epoxy powder coated CRCA sheet steel housing, low glare
with electronic ballast including cost of lamps etc., complete.
Makes: Phillips Model No.sereno-TBS 869 / Bajaj Model
No.BTMRA 414 CAT II / Crompton Model
No.CRTLU414EB/S.
814 ELEC-3.6.100 1 No Supply of 1 x 28W surface pendent mounting T5 Luminaire 950

Box type with CRCA housing with Electronic Ballast and all
standard accessories of makes Phillips / Crompton / Bajaj /
Surya / Havells.
815 ELEC-3.6.101 1 No Supply of 1 x 28W surface pendent mounting T5 Luminaire 608

plastic housing with integrated reflector extruded alluminium
luminaire with Electronic Ballast and all standard
accessories of makes Phlillips / Crompton / Bajaj / Surya /
Havells.
FLOURSCENT / CFL LAMPS 0

816 ELEC-3.7.1 1 No Supply of 40W-60W Lamp of makes Wipro / G.E. / Phillips / 8.76
Crompton / Bajaj.
817 ELEC-3.7.2 1 No Supply of 40W-60W Lamp of makes Surya / Havells / HPL / 8.03
Fortune Art
818 ELEC-3.7.3 1 No Supply of 40W-60W Lamp of makes Elton / Style Lamp / 7.3
819 ELEC-3.7.4 1 No Supply of 100W Lamp of makes Wipro / G.E. / Phillips / 9.49
Crompton / Bajaj.
820 ELEC-3.7.5 1 No Supply of 100W Lamp of makes Surya / Havells / HPL / 8.76
Fortune Art
821 ELEC-3.7.6 1 No Supply of 100W Lamp of makes Elton / Style Lamp / Mahita 8.03
Electro / Capart
822 ELEC-3.7.7 1 No Supply of 40W - 60W Milky Lamp of makes Wipro / G.E. / 10.22
823 ELEC-3.7.8 1 No Supply of 40W - 60W Milky Lamp of makes Surya / Havells 9.49
/ HPL / Fortune Art
824 ELEC-3.7.9 1 No Supply of 40W - 60W Milky Lamp of makes Elton / Style 8.76
825 ELEC-3.7.10 1 No Supply of Night Lamp of makes Wipro / G.E. / Phillips / 8.03
Crompton / Bajaj.
826 ELEC-3.7.11 1 No Supply of Night Lamp of makes Surya / Havells / HPL / 7.3
Fortune Art
Page # 44
1 2 3 4 5
827 ELEC-3.7.12 1 No Supply of Night Lamp of makes Elton / Style Lamp / Mahita 6.57
Electro / Capart
828 ELEC-3.7.13 1 No Supply of 18/20W fluorescent Lamp of makes Wipro / G.E. / 29.93
829 ELEC-3.7.14 1 No Supply of 18/20W fluorescent Lamp of makes Surya / 28.47
830 ELEC-3.7.15 1 No Supply of 18/20W fluorescent Lamp of makes Elton / Style 27.74
831 ELEC-3.7.16 1 No Supply of 36/40W fluorescent Lamp of makes Wipro / G.E. / 32.85
832 ELEC-3.7.17 1 No Supply of 36/40W fluorescent Lamp of makes Surya / 29.2
833 ELEC-3.7.18 1 No Supply of 36/40W fluorescent Lamp of makes Elton / Style 27.74
834 ELEC-3.7.19 1 No Supply of 28W T5 Lamp of makes Crompton / Bajaj / 87.6
Phillips / Surya / Havells.
835 ELEC-3.7.20 1 No Supply of 9W Pin type CFL Lamp of makes Wipro / G.E. / 54.75
836 ELEC-3.7.21 1 No Supply of 9W Pin type CFL Lamp of makes Surya / Havells 51.1
/ HPL / Fortune Art
838 ELEC-3.7.23 1 No Supply of 11W Pin type CFL Lamp of makes Surya / 54.75
840 ELEC-3.7.25 1 No Supply of 13W Pin type CFL Lamp of makes Surya / 73
847 ELEC-3.7.32 1 No Supply of up to 5W Retrofit tiny CFL of makes Wipro / G.E. / 83.95
848 ELEC-3.7.33 1 No Supply of up to 5W Retrofit tiny CFL of makes Surya / 80.3
849 ELEC-3.7.34 1 No Supply of up to 8W Retrofit tiny CFL of makes Wipro / G.E. / 91.25
850 ELEC-3.7.35 1 No Supply of up to 8W Retrofit tiny CFL of makes Surya / 87.6
851 ELEC-3.7.36 1 No Supply of up to 10/11W Retrofit tiny CFL of makes Wipro / 98.55
852 ELEC-3.7.37 1 No Supply of up to 10/11W Retrofit tiny CFL of makes Surya / 94.9
853 ELEC-3.7.38 1 No Supply of up to 13/14W Retrofit tiny CFL of makes Wipro / 80.3
854 ELEC-3.7.39 1 No Supply of up to 13/14W Retrofit tiny CFL of makes Surya / 73
855 ELEC-3.7.40 1 No Supply of 15W Retrofit tiny CFL of makes Wipro / G.E. / 131.4
Page # 45
1 2 3 4 5
856 ELEC-3.7.41 1 No Supply of 15W Retrofit tiny CFL of makes Surya / Havells / 109.5
HPL / Fortune Art
857 ELEC-3.7.42 1 No Supply of up to 18/20W Retrofit CFL of makes Wipro / G.E. 124.1
858 ELEC-3.7.43 1 No Supply of up to 18/20W Retrofit CFL of makes Surya / 109.5
859 ELEC-3.7.44 1 No Supply of 23W Retrofit CFL of makes Wipro / G.E. / 146
860 ELEC-3.7.45 1 No Supply of 23/25W Retrofit CFL of makes Surya / Havells / 131.4
HPL / Fortune Art
861 ELEC-3.7.46 1 No Supply of up to 25/26W Retrofit CFL of makes Wipro / G.E. 146
862 ELEC-3.7.47 1 No Supply of up to 25/26W Retrofit CFL of makes Surya / 131.4
863 ELEC-3.7.48 1 No Supply of up to 5W Non - Retrofit CFL of makes Wipro / 51.1
864 ELEC-3.7.49 1 No Supply of up to 5W Non - Retrofit CFL of makes Surya / 47.45
865 ELEC-3.7.50 1 No Supply of up to 7 W Non - Retrofit CFL of makes Wipro / 73
866 ELEC-3.7.51 1 No Supply of up to 7 W Non - Retrofit CFL of makes Surya / 51.1
867 ELEC-3.7.52 1 No Supply of up to 9 W Non - Retrofit CFL of makes Wipro / 73
868 ELEC-3.7.53 1 No Supply of up to 9 W Non - Retrofit CFL of makes Surya / 58.4
875 ELEC-3.7.60 1 No Supply of up to 20W Non - Retrofit CFL of makes Wipro / 146
ENERGY CONSERVING FIXTURES
879 ELEC-3.8.1 1 No Supply of 1 x 28W Patty type powder coated energy 950
conserving tube light luminaire with Electronic ballast
operating voltage range of 90 volts to 350 volts power factor
> 0.98 current less than 130ma crest factor and total
hormonic distortion shall be as per IS Specification with auto
cut off at high voltage suitable for 36/40W tube with 5 years
guarantee for luminaire. Makes: Phillips / Whipro / Trinic /
GE.
Page # 46
1 2 3 4 5
881 ELEC-3.8.3 1 No Supply of 1 x 28W Box type powder coated energy 1060
conserving tube light luminaire with Electronic ballast
operating voltage range of 90 volts to 350 volts power factor
> 0.98 current less than 130ma crest factor and total
hormonic distortion shall be as per IS Specification with auto
cut off at high voltage suitable for 36/40W tube with 5 years
guarantee for luminaire. Makes: Phillips / Whipro / Trinic /
GE.

883 ELEC-3.8.5 1 No Supply of Recessed mounted mirror optic luminaire with 4100
paralite louvers (P5) suitable for 2 x 36W CFL lamps.
Electronic ballast operating voltage range of 90 volts to 350
volts power factor > 0.98 current less than 130ma crest
factor and total hormonic distortion shall be as per the IS
Specification with auto cut off at High Voltage suitable for
36/40W tube with 5 years guarantee for luminaire. Makes:
Phillips / Whipro / Trinic / GE.

885 ELEC-3.8.7 1 No Supply of 28 W Electronic Ballast with less than 10% total 800
hormonic distortion and auto cut off at High Voltage suitable
for FTL with 5 years guarantee for luminaire. Makes: Phillips
/ Whipro / Trinic / GE.

LED LUMINAIRES INDOOR
891 ELEC-3.9.5 1 No Supply and Transportation of 9W Down lighter Recessed / 2557.75
Surface mounting made of diecast alluminium body with
powder coating, acrylic diffuser with Driver, operating
voltage range of 150 to 265 Volts AC, Power factor > 0.9
high power 6 Nos of 1 W LED 1 watt having efficacy of >
120 lumins/watt etc., complete.
a) LUMINAIRE MAKE : Phillips / GE / Crompton / VIN /
Bajaj / Havells.
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA /
OSRAM / SAMSUNG.

a) LUMINAIRE MAKE : Surya / MIC / BLU / KRIPA Lights /
Fortune Art / SEMTRONICS / Pierlite.
OSRAM / SAMSUNG.
Page # 47
1 2 3 4 5
Bajaj / Havells.
OSRAM / SAMSUNG.
OSRAM / SAMSUNG.

Bajaj / Havells.
OSRAM / SAMSUNG.

OSRAM / SAMSUNG.
897 ELEC-3.9.11 Deleted From SOR 11-12 ELEC-3.9.11

902 ELEC-3.9.28 1 No Supply and transportation of 18W, 1600 lumins, 1200mm 1692.05
length LED retrofit tube light, input voltage AC 220 - 260
Volts with >0.9 PF with inbuilt driver and frosted cover etc
complete. Makes: Phillips / GE / Crompton / VIN / Bajaj.
Page # 48
1 2 3 4 5
903 ELEC-3.9.29 1 No Supply and transportation of 18W 1200mm length, 1600 1455.95
lumins, LED retrofit tube light, input voltage AC 220 - 260
Volts with >0.9 PF with driver and frosted cover etc
complete. Makes: Surya / MIC / BLU / KRIPA Lights /
904 ELEC-3.9.30 1 No Supply and transportation of 18W, 1700 lumins, 1200mm 1810.1
length, T5 LED tube light fitting, input voltage AC 220 - 260
complete. Makes: Phillips / GE / Crompton / VIN / Bajaj.
905 ELEC-3.9.31 1 No Supply and transportation of 18W, 1700 lumins, 1200mm 1574
length, T5 LED tube light fitting, input voltage AC 220 - 260
complete. Makes: Surya / MIC / BLU / KRIPA Lights /
906 ELEC-3.9.32 1 No Supply and Transportation of 36W Recessed / Surface slim 7555.2
LED panel of 600mm x 600mm made of alluminium body
with acrylic diffuser, Constant current out put of Driver
operating voltage range of 150 to 265 Volts AC, Power
factor > 0.9 high power LEDs having efficacy of > 90
lumins/watt, junction temparature less than 85 degrees
centigrade and THD is less than 12% etc complete.
Bajaj / Havells.
OSRAM / SAMSUNG.
907 ELEC-3.9.33 1 No Supply and Transportation of 36W Recessed / Surface slim 7161.7
LED panel of 600mm x 600mm made of alluminium body
with acrylic diffuser, Constant current out put of Driver
operating voltage range of 150 to 265 Volts AC, Power
factor > 0.9 high power LEDs having efficacy of > 90
lumins/watt, junction temparature less than 85 degrees
OSRAM / SAMSUNG.
908 ELEC-3.9.34 1 No Supply and Transportation of 36W Recessed / Surface 8263.5

mounting 2' x 2' LED luminaire made of extruded
alluminium body with acrylic diffuser, Constant current
out put of Driver operating voltage range of 150 to 265 Volts
AC, Power factor > 0.9 high power LEDs having efficacy of
> 90 lumins/watt, junction temparature less than 85 degrees
Bajaj / Havells.
OSRAM / SAMSUNG.
Page # 49
1 2 3 4 5
mounting 2' x 2' LED luminaire made of extruded
alluminium body with acrylic diffuser, Constant current
out put of Driver operating voltage range of 150 to 265 Volts
AC, Power factor > 0.9 high power LEDs having efficacy of
> 90 lumins/watt, junction temparature less than 85 degrees
OSRAM / SAMSUNG.

mounting 2' x 2' LED luminaire made of pressure diecast
alluminium housing body with extended heat sink and
moulded diffuser, high effeiciency and low power loss driver,
Power factor > 0.9 high power LEDs having efficacy of >
100 lumins/watt, rated life of 50000 hours etc complete GE
make Mapple series or its equivalent.
Bajaj / Havells.
OSRAM / SAMSUNG.
Bajaj / Havells.
OSRAM / SAMSUNG.
OSRAM / SAMSUNG.
913 ELEC-3.9.39 1 No Supply and transportation of 6W to 9W LED Drivers 393.5
914 ELEC-3.9.40 1 No Supply and transportation of 12W to 18W LED Drivers 590.25
LED TYPE STREET LIGHTS 0
Page # 50
1 2 3 4 5
915 ELEC-3.9.16 1 No Supply and transportation of 18W to 20W street light 9934.301
luminaire made of pressure diecast alluminium body with
powder coated, having toughned glass cover input voltage
range of 100 to 270 volts AC, power factor > 0.90, high
power LED's having efficacy 100 lumines/watt and junction
temprature < 85 degree centegrade of IP 65 with optics,
total hormonic destortion less than 15% at 110 Volts AC,
driver efficiency >90% etc., complete.
a) LUMINAIRE MAKE : Phillips / GE / Crompton / VIN / Bajaj.
b) LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM /
SAMSUNG.
916 ELEC-3.9.17 1 No Supply and transportation of 18W to 20W street light 8094.295
luminaire made of pressure diecast alluminium body with
powder coated, having toughned glass cover input voltage
range of 100 to 270 volts AC, power factor > 0.90, high
power LED's having efficacy 100 lumines/watt and junction
temprature < 85 degree centegrade of IP 65 with optics,
total hormonic destortion less than 15% at 110 Volts AC,
driver efficiency >90% etc., complete.
OSRAM / SAMSUNG.

919 ELEC-3.9.20 1 No Supply and transportation of 60W street light luminaire 19675
made of pressure diecast alluminium body with powder
coated, having toughned glass cover input voltage range of
100 to 270 volts AC, power factor > 0.90, high power LED's
having efficacy 100 lumines/watt and junction temprature <
85 degree centegrade of IP 65 with optics, total hormonic
destortion less than 15% at 110 Volts AC, driver efficiency
>90% etc., complete.
SAMSUNG.
920 ELEC-3.9.21 1 No Supply and transportation of 60W street light luminaire 15346.5
OSRAM / SAMSUNG.
Page # 51
1 2 3 4 5
Bajaj / Havells.
OSRAM / SAMSUNG.
OSRAM / SAMSUNG.
Bajaj / Havells.
OSRAM / SAMSUNG.
OSRAM / SAMSUNG.
Page # 52
1 2 3 4 5
SAMSUNG.
OSRAM / SAMSUNG.
3.10 INDUCTION LUMINARIES

927 Supply and Transportation of Induction Type street light luminaire 0
of following capacities comprises of single piece die cast
Aluminium body and IP65 protection including Induction lamp and
ballast etc., Complete. Make: Crompton / Bajaj / Phillips / Surya /
LVD RAES.
ELEC-3.10.15 1 No 40W 13457.55

ELEC-3.10.16 1 No 80W 14418.96
ELEC-3.10.17 1 No 120W 16341.05
ELEC-3.10.18 1 No 150W 17784.99
ELEC-3.10.19 1 No 200W 20987.5
928 Supply and Transportation of Induction Type street light luminaire
Aluminium body and IP65 protection including Induction lamp and
ballast etc., Complete. Make: Fortune Art / Synergy Solutions /
Billion Light
ELEC-3.10.1 1 No 40W 11701.9

ELEC-3.10.2 1 No 80W 12537.75
ELEC-3.10.3 1 No 120W 14209.45
ELEC-3.10.4 1 No 150W 15465.05
ELEC-3.10.5 1 No 200W 18250
929 Supply and Transportation of Induction Type Flood light luminaire
Aluminium body and IP65 protection of including Induction lamp
and ballast etc., Complete. Make: Crompton / Bajaj / Phillips /
Surya / LVD RAES.
ELEC-3.10.20 1 No 40W 14439.4

ELEC-3.10.21 1 No 80W 15362.85
ELEC-3.10.22 1 No 120W 17293.7
Page # 53
1 2 3 4 5
ELEC-3.10.23 1 No 150W 18720.85
ELEC-3.10.24 1 No 200W 20148
ELEC-3.10.25 1 No 2 x 200W 38449.1
930 Supply and Transportation of Induction Type Flood light luminaire
Aluminium body and IP65 protection of including Induction lamp
and ballast etc., Complete. Make: Fortune Art / Synergy Solutions
/ Billion Light
ELEC-3.10.6 1 No 40W 12556

ELEC-3.10.7 1 No 80W 13359
ELEC-3.10.8 1 No 120W 15038
ELEC-3.10.9 1 No 150W 16279
ELEC-3.10.10 1 No 200W 17520
ELEC-3.10.11 1 No 2 x 200W 33434
931 Supply and Transportation of Induction Type suspended type
decorative high bay luminaire with polycarbonate refractor,
decorative integral die cast alluminium housing with heat shrinks
including Induction lamp and ballast etc., Complete. Make:
Crompton / Bajaj / Phillips / Surya / LVD RAES.
ELEC-3.10.26 1 No 80W 13012.25

ELEC-3.10.27 1 No 120W 14691.25
ELEC-3.10.28 1 No 150W 16370.25
932 Supply and Transportation of Induction Type suspended type
decorative high bay luminaire with polycarbonate refractor,
decorative integral die cast alluminium housing with heat shrinks
including Induction lamp and ballast etc., Complete. Make:
Fortune Art / Synergy Solutions / Billion Light
ELEC-3.10.12 1 No 80W 11315

ELEC-3.10.13 1 No 120W 12775
ELEC-3.10.14 1 No 150W 14235
SECTION - 4
U.G. CABLES
933 ELEC-4.1.1 1 Mtr Supply of 4 Sqmm 2 Core XLPE insulated, 1100V grade 75.9
armoured alluminium cable as per specification confirming
to IS:7098 (Part - I) of makes Torrent / Universal / CCI /
Unicab.
to IS:7098 (Part - I) of makes Polycab / KEI / RPG / Finolex /
Havells / Paragon / V-Guard / Fortune Art / Gloster/ Suncab
to IS:7098 (Part - I) of makes Finecab / Delton / Payal /
Gemscab / SPM.
Unicab.
Page # 54
1 2 3 4 5
Gemscab / SPM.
Unicab.
Gemscab / SPM.
942 ELEC-4.1.10 1 Mtr

Deleted From SOR 10-11 ELEC-4.1.10
943 ELEC-4.1.11 1 Mtr
944 ELEC-4.1.12 1 Mtr
945 ELEC-4.1.13 1 Mtr
Supply of 6 Sqmm 4 Core XLPE insulated, 1100V grade 107.25
Unicab.
Gemscab / SPM.
Unicab.
Page # 55
1 2 3 4 5
Gemscab / SPM.
Unicab.
Gemscab / SPM.
954 ELEC-4.1.22 1 Mtr Supply of 25 Sqmm 3.5 Core XLPE insulated, 1100V grade 170.775
Unicab.
Gemscab / SPM.
Unicab.
Gemscab / SPM.
Unicab.
Page # 56
1 2 3 4 5
961 ELEC-4.1.29 1 Mtr Supply of 50 Sqmm 3.5 Core XLPE insulated, 1100V grade 231
Gemscab / SPM.
Unicab.
Gemscab / SPM.
Unicab.
Gemscab / SPM.
969 ELEC-4.1.37 1 Mtr Supply of 120 Sqmm 3.5 Core XLPE insulated, 1100V 551.925
grade armoured alluminium cable as per specification
confirming to IS:7098 (Part - I) of makes Torrent / Universal
/ CCI / Unicab.
confirming to IS:7098 (Part - I) of makes Polycab / KEI /
RPG / Finolex / Havells / Paragon / V-Guard / Fortune Art /
Gloster/ Suncab
confirming to IS:7098 (Part - I) of makes Finecab / Delton /
Payal / Gemscab / SPM.
Page # 57
1 2 3 4 5
/ CCI / Unicab.
confirming to IS:7098 (Part - I) of makes Polycab / KEI /
RPG / Finolex / Havells / Paragon / V-Guard / Fortune Art /
Gloster/ Suncab
confirming to IS:7098 (Part - I) of makes Finecab / Delton /
Payal.
/ CCI / Unicab.
confirming to IS:7098 (Part - I) of makes KEI / RPG /
Paragon / V-Guard / Fortune Art / Gloster.
977 ELEC-4.1.45 1 Mtr Deleted From SOR 11-12 ELEC-4.1.45 0

/ CCI / Unicab.

/ CCI / Unicab.

/ CCI / Unicab.

11 KV H.T. XLPE CABLES 0
Page # 58
1 2 3 4 5
987 ELEC-4.1.55 1 No Supply of 3 Core 11 KV 35 Sqmm HT XLPE (E) armoured 497.475
Cable, as per IS specification confirming to IS 7098/II/85
with latest ammendments. Makes Torrent / Universal / CCI /
Unicab.

Unicab.

Unicab.

Unicab.
Unicab.
Unicab.
Unicab.
4.2 CABLE GLANDS

1003 ELEC-4.2.10 1 No Supply and Fixing of Single compression brass cable glands 238.71
for 3.5 core XLPE armoured cable for 185Sqmm with brass
washers complete.
washers complete.
washers complete.
washers complete.
Page # 59
1 2 3 4 5
1007 ELEC-4.2.14 1 No Supply and Fixing of single compression brass cable glands 68.62
for 4 core XLPE armoured cable up to 16.0 Sq.mm with
brass washers complete.
1008 ELEC-4.2.15 1 No Supply and Fixing of single compression brass cable glands 100.74
for 3.5 core XLPE armoured cable from 25 Sqmm to 50.0
Sq.mm with brass washers complete.
for 3.5 core XLPE armoured cable from 70 Sqmm to 150.0
Sq.mm with brass washers complete.
LUGS
1010 ELEC-4.3.1 1 No Supply and fixing of crimping type copper lugs confirming to 16.06
I.S specifications for cable upto 16 Sq.mm including nuts
and bolts with connections.
I.S specifications for cable of 25 Sq.mm including nuts and
bolts with connections.
Page # 60
1 2 3 4 5
1022 ELEC-4.3.13 1 No Supply and fixing of crimping type aluminium lugs 8.76
confirming to I.S specifications for cable upto 16 Sq.mm
including nuts and bolts with connections.
confirming to I.S specifications for cable of 25 Sq.mm
CABLE JOINTS
Page # 61
1 2 3 4 5
HEAT SHRINKABLE LT CABLE JOINTS
1049 ELEC-4.4.16 1 No Supply of heat shrinkable straight through joint Indoor / Out 949
door for L.T. XLPE Armoured 1100V grade cable complete
with necessary accessories and suitable clamps including
cost and conveyance of materials complete for 10 to 16
Sqmm. Makes Raychem / M Seal / Denson / Multy.
1050 ELEC-4.4.17 1 No Supply of heat shrinkable straight through joint Indoor / Out 1127.85
1052 ELEC-4.4.19 1 No Supply and errecting heat shrinkable straight through joint 2920
Indoor / Out door for L.T. XLPE Armoured 1100V grade
cable complete with necessary accessories and suitable
clamps including cost and conveyance of materials and all
labour charges etc., complete for 240 to 300 Sqmm. Makes
Raychem / M Seal / Denson / Multy.
cost and conveyance of materials complete for 400 Sqmm.
Makes: Raychem / M Seal / Denson / Multy.
3 CORE 11 KV HT CABLE STRAIGHT THROUGH JOINTS 0
Page # 62
1 2 3 4 5
1054 ELEC-4.4.21 1 No Providing and erecting heat shrinkable straight through joint 11001.1
out door / indoor for H.T, XLPE Insulated armoured cable
11000V grade complete with necessary accessories and
suitable clamps duly erected and connected to the supply
for the following multi core cables including cost and
conveyance of materials and all labour charges etc.,
complete for 16 to 35Sqmm.Makes Raychem / M Seal /
Denson / Multy.
Denson / Multy.
Denson / Multy.
HT END TERMINATION KITS 0

1057 ELEC-4.4.24 1 No Providing and errecting heat shrinkable indoor termination 5994.03
kit for 11 KV XLPE HT cable 3 core 70 Sqmm with
necessary materials etc., complete. Makes Raychem / M
Seal / Denson / Multy.
1060 ELEC-4.4.27 1 No Providing and errecting heat shrinkable outdoor termination 9089.96
Page # 63
1 2 3 4 5
DOUBLE WALLED CORRUGATED HDPE PIPE 0

1063 ELEC-4.5.1 1 Mtr Supply and Transportation of Outer dia 50mm and Inner dia 80.025
38mm double walled corrugated HDPE duct made as per
specification BSEN - 500 86/IS 14930 Part-II. Makes:DURA
LINE (Dura Guard) or its equivalent make.
1067 ELEC-4.5.5 1 Mtr Supply and Transportation of Outer dia 120mm and Inner 209.55
dia 103.50mm double walled corrugated HDPE duct made
as per specification BSEN - 500 86/IS 14930 Part-II.
Makes:DURA LINE (Dura Guard) or its equivalent make.
dia 136mm double walled corrugated HDPE duct made as
per specification BSEN - 500 86/IS 14930 Part-II.
CABLE TRAYS 0
1071 ELEC-4.6.1 1 Mtr Supply and Installation of 600mm x 75mm x 2mm thick hot 949
dip GI perforated cable tray with cover along with required
angle supports, with coupler plates, Anchor bolts and nuts
etc complete and the tray should be fitted on the wall /
Ceiling etc. complete.
Page # 64
1 2 3 4 5
1072 ELEC-4.6.2 1 Mtr Supply and Installation of 600mm x 50mm x 2mm thick GI 700.8
perforated cable tray with cover along with required angle
supports, with coupler plates, Anchor bolts and nuts etc
complete and the tray should be fitted on the wall / Ceiling
etc. complete.
etc. complete.
etc. complete.
1075 ELEC-4.6.5 1 Mtr Deleted From SOR 12-13 ELEC-4.6.5

1079 ELEC-4.6.9 1 Mtr Supply and Installation of 150mm x 50mm x 2mm thick GI 292
etc. complete.
Ladder type cable tray along with required angle supports,
with coupler plates, Anchor bolts and nuts etc complete and
the tray should be fitted on the wall / Ceiling etc. complete.
1083 Note: Perforated cable trays provided without cover 30%

may be deducted from above rates.
SECTION - 5
FANS
1084 ELEC-5.1.1 1 No Supply of 48" (1200mm) Sweep ISI mark Ceiling Fan as per 1168
IS 374 - 1979 and, with double ball bearings but without
Regulator of makes Crompton / Bajaj Kassels 50 / Usha
atom
Page # 65
1 2 3 4 5
1085 ELEC-5.1.2 1 No Supply of 48" (1200mm) Sweep ISI mark as per IS 374 - 1332.25
1979 and 5 Star rated Ceiling Fan, with double ball
bearings but without Regulator of makes Crompton High
Speed Plus / Bajaj Electra 50 / Orient Energy Star / Havells
ES 50.
1086 ELEC-5.1.3 1 No Supply of 48" (1200mm) Sweep 5 Star rated Ceiling Fan 1474.6
without Regulator of makes Crompton High Speed Decora /
Bajaj Regal star / Havells Fusion 50 / Orient Summer Crown
/ Usha technix decorative
1087 ELEC-5.1.4 1 No Supply of 56" (1400mm) Sweep ISI mark Ceiling Fan as per 1222.75
IS 374 - 1979 and, with double ball bearings but without
Regulator of makes Crompton / Bajaj Kassels 50 / Usha
atom
1088 ELEC-5.1.5 1 No Supply of 56" (1400mm) Sweep 4/5 Star rated Ceiling Fan 1576.8
without Regulator of makes Crompton / Bajaj Elegance Star
/ Usha / Havells.
1090 ELEC-5.1.7 1 No Supply of 16" (400mm) Wall mounted Fan of makes 1716.96
Crompton SDX Gold / Bajaj Elite / Havells Swing Premia
gold / Usha / Orient Wall 43.
1091 ELEC-5.1.8 1 No Supply of 16" (400mm) Pedestal Fan of makes Crompton 1981.22
SDX Gold / Bajaj Spectrum / Havells Swing Remote /
Usha / Orient.
1092 ELEC-5.1.9 1 No Supply of 18" (450mm) Wall mounting / Pedestal Air 4380
Circulators of makes Crompton / Havells Turbo Force /
Orient / Almounard.
1093 ELEC-5.1.10 1 No Supply of 24" (600mm) Wall mounting / Pedestal Air 4818
Circulators of makes Crompton / Havells Turbo Force /
Almounard.
1094 ELEC-5.1.11 1 No Supply of 12" (300mm) Cabin fan of makes Crompton / 1131.5
Havells ciera / Orient AP12.
1095 ELEC-5.1.12 1 No Supply of 12" (300mm) Light duty exhaust fan with wire 985.5
guard etc complete of makes Crompton / Bajaj Bahar WG /
Havells Ventil Air-DB / Orient hill air.
1096 ELEC-5.1.13 1 No Supply of 9" (225mm), Light duty exhaust fan with double 923.45
ball bearing and wire guard etc complete of makes
Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient
hill air.
1097 ELEC-5.1.14 1 No Supply of 12" (300mm) ISI, 900 RPM Heavy duty exhaust 1930.85
fan with metallic blades with Mark of makes Crompton /
Almounard / Havells Turbo Force.
1098 ELEC-5.1.15 1 No Supply of 15" (375mm) ISI, 900 RPM Heavy duty exhaust 2350.6
Almounard / Havells Turbo Force
1099 ELEC-5.1.16 1 No Supply of 18" (450mm) ISI, 900 RPM Heavy duty exhaust 2993
Almounard / Havells Turbo Force
WATER HEATERS
Page # 66
1 2 3 4 5
1100 ELEC-5.2.1 1 No Supply, Transportation and fixing of storage / Pressure type 6164.12
Vertical / Horizontal 230/250V single phase 2000watts ISI
mark 5 Star rated water heater with SS tank and ABS plastic
body of 15 Ltrs capacity to withstand up to 6.5 bar of water
pressure including all standard accessories and dead weight
pressure reducing valve on out let side, including cost of 2
Nos nylon / PVC / Metallic hose pipe, testing and all labour
charges etc., complete. Makes:makes Crompton model No.
solarium plus SWH 725, Class 1 rated or its equivalent
make of Bajaj / Venus / Racold / Usha.
1101 ELEC-5.2.2 1 No Supply, Transportation and fixing of storage / Pressure type 7256.93
Vertical / Horizontal 230/250V single phase 2000watts ISI
mark 5 Star rated water heater with SS tank and ABS plastic
body of 25 Ltrs capacity to withstand up to 6.5 bar of water
pressure including all standard accessories and dead weight
pressure reducing valve on out let side, including cost of 2
Nos nylon / PVC / Metallic hose pipe, testing and all labour
charges etc., complete. Makes:makes Crompton model No.
solarium plus SWH 725, Class 1 rated or its equivalent
make of Bajaj / Venus / Racold / Usha.

ACCESSORIES FOR WATER HEATERS
1104 ELEC-5.3.1 1 No Heating element of 1.5 / 2.0 / 3.0 KW. 264.99
1105 ELEC-5.3.2 1 No Supply of thermostat with range 300 to 900C.Adjustable and 182.5
suitable for 25 to 50 Ltrs. Capacity.
1106 ELEC-5.3.3 1 No Supply of pressure release valve for water heater of 15 to 50 182.5
Ltrs.capacity.
1107 ELEC-5.3.4 1 No Flexible Nylon / PVC Metallic hose pipe 109.5
ACCESSORIES FOR MOTORS 0
1108 ELEC-5.4.1 1 No Supply & Fixing of D.O.L Starter 250V, Single phase, 50Hz. 694.2
With SS enclouser comprising of contactor with bi-metalic
relay with necessary push buttons, etc., complete. Makes:
Siemens / Crompton / L&T.
1109 ELEC-5.4.2 1 No Supply & Fixing of D.O.L Starter 415V, 3 phase, 50Hz.. 1290.5
enclosed with no volt coil and overload protection with
necessary materials, etc., complete suitable upto 7.5.HP.
Makes: Siemens / Crompton / L&T.

1115 ELEC-5.4.8 1 No Motor Cover made with GI sheet of 18SWG for protection 53.4
from rain complete.
Page # 67
1 2 3 4 5
1116 ELEC-5.4.39 Supply & Fixing of D.O.L Starter 415V, 3 phase, 50Hz.. 2216.1
enclosed with no volt coil, overload protection and single
phase preventor , etc., complete suitable upto 10.0.HP.
Makes: Siemens / Crompton / L&T.
SINGLE PHASE SUBMERSIBLE MOTOR PUMP SETS
1117 ELEC-5.4.9 1 No Supply and Transportation of 0.75HP 8 Stage single phase 12460
ISI submersible motor pumpset suitable for 4" Bore well.
Makes: Kirloskar / Crompton / CRI / KSB / Texmo / Aryan
Varsha.
1118 ELEC-5.4.10 1 No Supply and Transportation of 1.00HP 10 Stage single 14240
phase ISI submersible motor pumpset suitable for 4" Bore
well. Makes: Kirloskar / Crompton / CRI / KSB / Texmo /
Aryan Varsha.
Aryan Varsha.
Aryan Varsha.
Aryan Varsha.
THREE PHASE SUBMERSIBLE MOTOR PUMP SETS. 0
1122 ELEC-5.4.14 1 No Supply and Transportation of 3.00HP 20-23 Stage Three 20025
Aryan Varsha.

1124 ELEC-5.4.16 1 No Supply and Transportation of 3.00HP 30- 33 Stage Three 24030
Aryan Varsha / Nethra / Flowell.
1125 ELEC-5.4.17 1 No Supply and Transportation of 5.00HP 30 - 35 Stage Three 26255

Aryan Varsha/ Nethra / Flowell.
1126 ELEC-5.4.18 1 No Supply and Transportation of 5.00HP 40 Stage Three 28925

1127 ELEC-5.4.19 1 No Supply and Transportation of 5.00HP 50 Stage Three 32040


Page # 68
1 2 3 4 5
SINGLE PHASE OPEN WELL SUBMERSIBLE MOTOR
PUMP SETS.
1131 ELEC-5.4.23 1 No Supply and Transportation of 1.00HP Single phase open 9790
well ISI submersible motor pumpset. Makes: Kirloskar /
Crompton / CRI / KSB / Texmo / Aryan Varsha.
THREE PHASE OPEN WELL SUBMERSIBLE PUMP

SETS.
1134 ELEC-5.4.26 1 No Supply and Transportation of 3.00HP Three phase open 15130
well ISI submersible motor pumpset.(65x50) Makes:
Kirloskar / Crompton / CRI / KSB / Texmo / Aryan Varsha.
1137 ELEC-5.4.40 Supply and Transportation of 10.00HP Three phase open 28480
SINGLE PHASE MONO BLOCK MOTOR PUMP SETS.
1138 ELEC-5.4.29 1 No Supply and Transportation of 0.5HP Single phase ISI Mono 4361
block CI body motor pumpset (25x25mm). Makes: Kirloskar
/ Crompton / CRI / KSB / Texmo / Aryan Varsha.
1141 ELEC-5.4.41 Supply and Transportation of 1.02HP Single phase ISI self 10680
priming Mono block IP44 motor pumpset (40x40mm).
Varsha.
1142 ELEC-5.4.42 1 No Supply and Transportation of 2.00HP Three phase ISI self 12460
Varsha.
Varsha.
Page # 69
1 2 3 4 5
Varsha.
CONTROL PANEL BOARD FOR MOTORS 0
1145 ELEC-5.4.32 Supply and Transportation of control panel for single phase 3504
submersible motors up to 3 HP @ 220V 50Hz operating
range between 80 to 240V including supply and fixing of
Direct - on - Line LTLK / SIEMENS / CROMPTON make
Volt meter and Ammeter with starting and running
capacitors assembled with ISI mark contactors and fitted
with Legrand make ISI mark MCB etc., complete.

REPAIRS TO AIR CONDITIONERS
1153 ELEC-5.5.1 1 No Supply, Fabrication of 1set MS bracket suitable for fixing out 730
door unit of split AC unit.
1154 ELEC-5.5.2 1 Ft Providing 2 runs of Copper tubes for suction and liquid 730
between indoor and outdoor unit for split/Casseete Air-
Conditioner including foaming etc., complete.
1.3/4" x 3/8"
2. 5/8" x 1/4"
3. 1/2" x 1/4"
1155 ELEC-5.5.3 1 No Supply of 1.0 / 1.5 Ton brand new Rotary type sealed 5949.5
compressor.
1156 ELEC-5.5.4 1 No Supply of 2.0 Ton brand new Rotary type sealed 6752.5
compressor.
1157 ELEC-5.5.5 1 No Multi speed Fan Motor suitable for 1.0 / 1.5 / 2.0 Ton 1160.7
Window A.C.Unit of makes Crompton / AU.
1158 ELEC-5.5.6 1 No Fan motor capacitor 6 mfd by new capacitor for A.C 113.88
machine of 1.0 1.5 / Ton Capacity.
1159 ELEC-5.5.7 1 No Thermostat switch suitable for 1.0 / 1.5 / 2.0 Ton A.C.Unit. 299.3
1160 ELEC-5.5.8 1 No Starting capacitor of 80 to 120 mfd. by new approved make 131.4
capacitor suitable for compressor motor of 1.0 / 1.5 Ton
A.C. Unit.
1161 ELEC-5.5.9 1 No Running capacitor of 36 mfd by new approved make 160.6
capacitor suitable for compressor motor of 1.0 / 1.5 Ton
A.C.Unit.
1162 ELEC-5.5.10 1 No Relay by approved make having pickup voltage 220 Volts 164.25
and dropout voltage 120 Volts suitable for 1.0 / 1.50 Ton
A.C. Unit.
1163 ELEC-5.5.11 1 No Filter and capillary tube including welding etc., complete for 354.05
1.0 / 1.5 / 2.0 Ton A.C.Unit.
1164 ELEC-5.5.12 1 No Air filter suitable for 1.50 Ton Window A.C.Unit P.V.C. / 164.25
NYLON.
1165 ELEC-5.5.13 1 No Air filter suitable for 1.50 Ton Split A.C.Unit P.V.C. / NYLON. 346.75
Page # 70
1 2 3 4 5
1166 ELEC-5.5.14 1 No Rewiring the entire Window type 1.50 Ton A.C.unit with 2.5 237.25
Sq.mm Flexible copper cable and putting the same in
working conditions.
1167 ELEC-5.5.15 1 No Overhauling and servicing the Window type 1.0 / 1.5 Ton 255.5
A.C. Machine by Cleaning the condensor cooling Coil etc.,
by blower and oiling the Fan Motor and Cleaning all parts
and putting the machine in working condition.
1168 ELEC-5.5.16 1 No Fan blade for 1.0 / 1.5 Ton A.C.Machine. 408.8
1169 ELEC-5.5.17 1 No Grill of 1.0 / 1.5 ton A.C. Machine (for assembled Units). 311.71
1170 ELEC-5.5.18 1 No Grill of 1.0 / 1.5 ton A.C. Machine of branded units. 1241
1171 ELEC-5.5.19 1 No Rotary / Selector switch by new one. 83.95

1172 ELEC-5.5.20 1 No Flushing the line, leak testing, leak stopping, vaccumming, 1095
dehydrating and charging the gas in the refrigeration system
for 1.0/ 1.5 /2.0 Ton Window A.C.Unit.
1173 ELEC-5.5.21 1 No Flushing the line, leak testing, leak stopping, vaccumming, 1533
dehydrating and charging the gas in the refrigeration system
for 1.5 /2.0 Ton Split A.C.Unit.
1174 ELEC-5.5.22 1 No Spray painting of Refrigerator using good quality paint after 525.6
scraping the surface etc.
1175 ELEC-5.5.23 1 No New sealed compressor of 1/8 HP suitable for 165 to 185 2263
Ltrs. Capacity Refrigerator.
1176 ELEC-5.5.24 1 No Sealed compressor of 1/6 HP suitable for 285 / 310 Ltrs. 2737.5
Capacity Refrigerator.
1177 ELEC-5.5.25 1 No Supply of fan motor by new 1/10 t0 1/12 H.P 1250 RPM fan 1160.7
motor for Water Cooler of 80-150 Ltrs.
1178 ELEC-5.5.26 1 No Bush for fan motor of 80-150 Lts. 91.25

1181 ELEC-5.5.29 1 No Resistance type regulator for ceiling fans 900/1200/1400mm 29.2
sweep complete erected on existing board.
1182 ELEC-5.5.30 Installation of Split Air Conditioners. 1095

1183 ELEC-5.5.31 Removing of existing Split Air Conditioners without 292
damaging to copper pipe.
1198 ELEC-5.5.56 1 No Installation of Cassette type Split Air Conditioners. 2190
1199 ELEC-5.5.57 1 No Installation of Tower type Split Air Conditioners. 1825
Page # 71
1 2 3 4 5
1200 ELEC-5.5.89 1 Set Supply, Fabrication of 1set MS bracket suitable for fixing out 1460
door unit of Casseete AC unit.
1201 ELEC-5.5.90 1 Mtr Providing 2 runs of Copper tubes for suction and liquid 1095
1.7/8" x 1/2"
1202 ELEC-5.5.91 1 Mtr Providing 2 runs of Copper tubes for suction and liquid 1277.5
1. 1 1/8" x 5/8"
AIR CONDITIONERS
1232 Supply of split AC unit with high wall mounted indoor unit
and outdoor condencing unit Hermetically sealed
compressor suitable for operation on 230V, 50Hz, 1Phase
AC supply capable of performing cooling dehumidifying air
circulating and filtering with cooling and condensing units
with 5mts of required size of copper piping duly insulated
and 3 core copper flexible chord of required length and
cordless remote control
A 1.5TR Split ACs

ELEC-5.5.92 1 No 1.5 TR 3 Star capable of delivering 18000 BTU/hr and 28373.64
above with operating on refrigerant R-22 makes Mitsubishi
SRK 19 CK-6
Page # 72
1 2 3 4 5
ELEC-5.5.93 1 No 1.5 TR 3 Star capable of delivering 18000 BTU/hr and 26791
above with operating on refrigerant R-22 makes Daikin FTE-
M or N Sereis / Carrier Novello / Blue Star 3HW18VB1 /
Hitachi (Kazi+) / Voltas 183 PX-R.
ELEC-5.5.94 1 No 1.5TR 5 Star capable of delivering 18000 BTU/hr and above 33823.09
with operating on refrigerant R-22 makes Mitsubishi
SRK20CKS-6 / Hitachi ACE FMS
ELEC-5.5.95 1 No 1.5TR 5 Star capable of delivering 18000 BTU/hr and above 32485
with operating on refrigerant R-410A makes Daikin FT-M /
Carrier Estrella / Blue Star 5HW18DBF1.
B 1.8TR-2.1TR Split ACs

ELEC-5.5.96 1 No 1.8 / 2.0 TR 3 Star capable of delivering 21600 BTU/hr and 34091
above with operating on refrigerant R-22 makes Carrier
Dura edgeplus / Daikin FTE-M or N Series / Blue Star
3HW24SVB1
ELEC-5.5.97 1 No 2.0 TR 4 Star capable of delivering 21600 BTU/hr and 41237.7
above with operating on refrigerant R-22 makes 'O' General.
ELEC-5.5.98 1 No 2.0 TR 4 Star capable of delivering 21600 BTU/hr and 34748

above with operating on refrigerant R-22 makes Carrier
Kurve.
ELEC-5.5.99 1 No 1.8 / 2.0 TR 5 Star capable of delivering 21600 BTU/hr and 40077
above with operating on refrigerant R-22 makes Mitsubishi
SRK25CKS-6 / Daikin FT-M Series
C Inverter Split AC Unts (Cooling Only)

1233 ELEC-5.5.100 Supply of INVERTER Model Cool type split AC unit with high 0
wall mounted Single Split indoor unit and outdoor
condencing unit Hermetically sealed compressor suitable for
operation on 230V, 50Hz, 1Phase AC supply capable of
performing Heat cool dehumidi -fying air circulating and
filtering with cooling and condensing units duly insulated and
3 core copper flexible chord of required length etc. complete
including cordless remote
ELEC-5.5.101 1 No 1.5 TR capable of delivering 18000 BTU/hr and above with 42241.45
operating on refrigerant R-410 makes O General model No.
ASGA18JCC / Toshibha Model No. RAS-18N3KCV-IN
operating on refrigerant R-410 makes 'Daikin Model
No.FTKS50FVMA / Mitsubishi Model No. SRK18YL-S / Blue
Star Model No. HNHW18CBF.
operating on refrigerant R-410 makes Thosibha Model No.
RAS-22N3KCV-IN / Daikin Model No. FTKS60FVMA
operating on refrigerant R-410 makes 'O' General Model
No. ASGA24JCC / Blue Star Model No. HNHW22CBF
CASSETTE TYPE AC UNITS
Page # 73
1 2 3 4 5
1234 Supply of Cassette type AC unit with ceiling mounted 0
indoor unit and outdoor condencing unit Hermetically
sealed compressor suitable for operation on AC supply
capable of performing cooling dehumidifying air circulating
and filtering with cooling and condensing units etc complete
with Wireless remote controller, but without refrigerent
piping and cable.
ELEC-5.5.105 1 No Single Phase Makes: 2.2TR Daikin / 2.0TR 'O' Genral 59860
AUG25AB
ELEC-5.5.106 1 No 3.0TR Three Phase capable of delivering 36000 BTU/hr and 94965.7
above with operating on refrigerant R-22 makes Makes: 'O'
Genral
ELEC-5.5.107 1 No 3.0TR Three Phase capable of delivering 36000 BTU/hr and 79935
above with operating on refrigerant R-22 Makes: Daikin /
Carrier / Blue Star.
above with operating on refrigerant R-22 Makes: 'O'
General
above with operating on refrigerant R-22 Makes: Daikin
ELEC-5.5.110 1 No 3.5TR Three Phase Makes: Carrier / Blue Star 91250

above with operating on refrigerant R-22 Makes: Daikin / 'O'
Genral
above with operating on refrigerant R-22 Makes: Carrier /
Blue Star
Blue Star.
above with operating on refrigerant R-410 Makes: Toshibha
/ O General (Inverter Technology)
Blue Star
above with operating on refrigerant R-410 Makes: Toshibha
/ O General (Inverter Technology)
TOWER MODEL TYPE AC UNITS

1235 Supply of Slim line / Tower Model/Verticool type split AC
unit with indoor unit and floor mounted outdoor condencing
unit Hermetically sealed Scroll compressor suitable for
operation on AC supply capable of performing cooling
dehumidifying air circulating and filtering with cooling and
condensing units etc complete with cordless remote
control
above with operating on refrigerant R-22 Makes: Voltas
above with operating on refrigerant R-22 Makes: Blue Star
Page # 74
1 2 3 4 5
INVERTOR MODEL HEAT COOL SPLIT AC'S
1236 Supply of INVERTER Model Heat Cool type split AC unit with 0
high wall mounted Single phase Split indoor unit and
outdoor condencing unit Hermetically sealed compressor
suitable for operation on 230V, 50Hz, 1Phase AC supply
capable of performing Heat cool dehumidi -fying air
circulating and filtering with cooling and condensing units
duly insulated and 3 core copper flexible chord of required
length etc. complete with cordless remote control
ELEC-5.5.87 1 No ......do....with Cooling capacity 18000 BTU/Hr and above, 50735

Coffeient of performance 3.70 and above and R410A
refrigerent etc complete. Make : Toshiba model No. Indoor
Unit RAS-18N3KV2-E Outdoor Unit RAS-18N3AV2-E or its
equivalent model of 'O'General / Mitsubishi / Daikin.
ELEC-5.5.88 1 No .......do.....with Cooling capacity 22000 BTU/Hr and above, 54385

Coffeient of performance 3.40 and above and R410A
refrigerent etc complete. Make : Toshiba model No. Indoor
Unit RAS-B22N3KV2-E Outdoor Unit RAS-22N3AV2-E or
its equivalent model of 'O'General / Mitsubishi / Daikin
STABILIZERS
1237 ELEC-5.5.46 1 Mtr Supply of 0.5 KVA Stabilizer of make V-Guard / Real Guard 816.75
/ Uni Stab / ITL.
1238 ELEC-5.5.47 1 Mtr Supply of 0.5 KVA Stabilizer of make Keeline / Soft Line / 668.25
Capri.
/ Uni Stab / ITL.
Capri.
/ Uni Stab / ITL.
Capri.
/ Uni Stab / ITL.
Capri.
/ Uni Stab / ITL.
Capri.
REPAIRS TO MOTORS AND REWINDING, BEARINGS
1247 ELEC-5.6.1 Bearing of approved make for electric motor single phase / 159.31
3 phase AC upto 1 HP of all types.
3 phase AC upto 2 to 3 HP of all types.
3 phase AC upto 5 to 7.5 HP of all types.
Page # 75
1 2 3 4 5
3 phase AC upto 10 to 12.5 HP of all types.
1251 ELEC-5.6.5 Bearing of approved make for electic motor single phase / 3 435.21
phase AC upto 15 to 20 HP of all types.
1252 ELEC-5.6.6 Bearing of table / cabin / pedestal / ceiling / exhaust fan 74.76
complete with alignment of shaft and tested.
1253 ELEC-5.6.7 Bearing of bush / rubber / ring washers complete with 35.6
alignment of shaft and tested.
1254 ELEC-5.6.8 Capacitor of table / cabin / pedestal / ceiling / exhaust fan 33.82
complete.
1255 ELEC-5.6.9 EICHER model 11:10 with 100 H. P direct injestion 4 stroke 707611.41
engine with one spare wheel 3800 mm cabin high deck with
jangla (full body) (4 wheeler) for generator

6.1 SWAGED POLES / OCTOGONAL POLES, GARDEN
POSTS AND ACCESSORIES
1261 ELEC-6.1.1 1 Kg Fabrication, supply and transportation of all sizes swaged 51.83
poles up to site confirming to IS 2713 / 1980 specifications.
The pole should be painted with primary coat of red oxide
and black bituminous paint up to ground level with base
plate, including cost of all materials etc., complete.(Rate per
K. G)
1262 ELEC-6.1.2 1 Kg Fabrication and Supply of M.S. Poles for garden posts with 47.45
'B' class 60.25mm outer dia with base plate and suitable
pole cap including cost and conveyance of all material
including fixing of luminaire and labour charges etc.,
complete. (Rate per K. G)
1263 ELEC-6.1.3 1 Kg Supply of different sizes of M. S. Pipe brackets (Rate per 47.45
K.G)
1264 ELEC-6.1.4 a 1 No Fabrication, Transportation and supply of hot-dip galvanized 7065.67
Octogonal Pole with BSEN - 10025 grade S 355 JO steel
plate for shaft, IS 2062 for base plate with door opening
arrangement, including the supply of suitable boards with
bakelite sheet and MCB's as per IS specification suitable to
withstand the wind speed of 180 KMPH for 7.50 Mtrs height
Pole having dimensions Bottom 130 mm,. Top 70mm with
3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20
x 700 long 'J' bolts along with template of Makes: Bajaj /
Valmont / TRANSRAIL.
Page # 76
1 2 3 4 5
1265 ELEC-6.1.4 b 1 No Fabrication, Transportation and supply of hot-dip galvanized 6359.03
withstand the wind speed of 180 KMPH for 7.50 Mtrs height
x 700 long 'J' bolts along with template of Makes Aster /
LAASMA / Surya.

withstand the wind speed of 180 KMPH for 9 Mtrs height
x 750 long 'J' bolts along with template of Makes: Bajaj /

x 750 long 'J' bolts along with template of Makes: Aster /
LAASMA / Surya.

3mm thick, base plate 275 x 275 x16mm and 4 Nos of M24
x 750 long 'J' bolts along with template of Makes Bajaj /
Page # 77
1 2 3 4 5
3mm thick, base plate 275 x 275 x16mm and 4 Nos of M24
x 750 long 'J' bolts along with template of Makes: Aster /
LAASMA / Surya.

withstand the wind speed of 180 KMPH for 12 mtrs height
Pole having dimensions Bottom 200mm / 240mm, Top
100mm / 90mm with 4mm thick, base plate 320 x320
x20mm and 4 Nos of M24 x 850 long 'J' bolts along with
template of Makes Bajaj / Valmont / TRANSRAIL.

withstand the wind speed of 180 KMPH for 12 mtrs height
Pole having dimensions Bottom 200mm / 240mm, Top
100mm / 90mm with 4mm thick, base plate 320 x320
x20mm and 4 Nos of M24 x 850 long 'J' bolts along with
template of Makes: Aster / LAASMA / Surya.
1272 ELEC-6.1.8 1 No Fabrication, Transportation and supply of 1.0 Mtr Length 886.95
Single Arm Bracket made with MS galvanized 40mm /
50mm dia Pipe.
1273 ELEC-6.1.9 1 No Fabrication, Transportation and supply of 1.50 Mtr Length 1170.92
Single Arm Bracket made with MS galvanized 40mm /
50mm dia Pipe.
1274 ELEC-6.1.10 1 No Fabrication, Transportation and supply of 1 Mtr length 1022
Double Arm Bracket made with MS galvanized 40mm /
50mm dia Pipe.
1275 ELEC-6.1.11 1 No Fabrication, Transportation and supply of 1.50 Mtr length 1809.67
Double Arm Bracket made with MS galvanized 40mm /
50mm dia Pipe.
1276 ELEC-6.1.42 1 No Fabrication, Transportation and supply of of 1.5mtrs sword 3285
type decorative double arm bracket with dooms either sides
complete with all accessories with MS galvanized 40mm /
50mm dia Pipe.
Page # 78
1 2 3 4 5
1277 ELEC-6.1.12 a 1 No Fabrication,transportation and supply of MS hot dip 13214.46
galvanized 9.0 Mtrs long octagonal poles with 3mm thick
HT steel plate with a bottom 200mm / 240mm dia and top
100mm / 90mm dia, base plate of size 290mm x 290mm x
16mm thick welded to bottom of pole, terminal box with door
size of 500mm x 100mm with all accessories connector and
fuse base and fixing arrangements for advertisements
holdings, foundation bolts with washers and nuts 4 sets with
all accessories as per the requirements at site and as per
the directions of field engineers during execution for finished
item of work. Makes: Bajaj / Valmont / TRANSRAIL.
1278 ELEC-6.1.12 b 1 No Fabrication,transportation and supply of MS hot dip 11893.16

HT steel plate with a bottom 200mm / 240mm dia and top
100mm / 90mm dia, base plate of size 290mm x 290mm x
16mm thick welded to bottom of pole, terminal box with door
size of 500mm x 100mm with all accessories connector and
fuse base and fixing arrangements for advertisements
holdings, foundation bolts with washers and nuts 4 sets with
item of work. Makes: Aster / LAASMA / Surya.
1279 ELEC-6.1.13 1 No Foundation and erection charges for 9 mtrs / 10 Mtrs long 3285
Octagonal/Conical pole duly erecting on base plate 290mm
x 290mm x 16mm thick duly providing 4 Nos. foundation
bolts with nuts with providing of M20 c.c work vibrated
concreting mixing with necessary steel (20kgs)
reinforcement as directed by the field engineers during
execution including all labour charges and cost and
conveyance of materials etc. complete.
1280 ELEC-6.1.14 a 1 No Fabrication, transportation and supply of 12 Mtrs Polygon 68589.34

High Mast with single section of 3mm thick of Bottom
350mm / 360mm and Top 125mm / 100mm dia with BSEN -
10025 grade S 355 JO steel plate for shaft, IS 2062 for base
plate, having a base plate of size 520mm dia 16mm thick
with its accessories. Mast shall be in single section for 12
Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot
dip galvanized and suiatble for wind velocity of 180 KMPH
as per IS 875 part 3 including head frame, 2 point
suspension system with steel rope 6mm dia (7/19)
construction double drum winch / power tool operating
speed of 900 RPM, and necessary cable trailer connections
and single speed motor with M 24 x 800 mm foundation
bolts of required quantity, suitable for 6 luminaires with GLS
type aviation twin lamp Makes: Bajaj / Valmont /
TRANSRAIL.
Page # 79
1 2 3 4 5
1281 ELEC-6.1.14 b 1 No Fabrication, transportation and supply of 12 Mtrs Polygon 61730.26
High Mast with single section of 3mm thick of Bottom
350mm / 360mm and Top 125mm / 100mm dia with BSEN -
10025 grade S 355 JO steel plate for shaft, IS 2062 for base
plate, having a base plate of size 520mm dia 16mm thick
with its accessories. Mast shall be in single section for 12
Mtrs and 2 sections for 16 and 20 Mtrs. Mast shall be hot
dip galvanized and suiatble for wind velocity of 180 KMPH
as per IS 875 part 3 including head frame, 2 point
suspension system with steel rope 6mm dia (7/19)
construction double drum winch / power tool operating
speed of 900 RPM, and necessary cable trailer connections
and single speed motor with M 24 x 800 mm foundation
bolts of required quantity, suitable for 6 luminaires with GLS
type aviation twin lamp Makes: Aster / LAASMA / Surya.

High Mast with two sections of Bottom 4mm thick and Top
section with 3mm thick with GLS type aviation lamp of
Bottom 350mm and Top 125mm dia with BSEN - 10025
grade S 355 JO steel plate for shaft, IS 2062 for base plate,
having a base plate of size 560mm dia 25mm thick with its
accessories. Mast shall be in single section for 12 Mtrs and
2 sections for 16 and 20 Mtrs. Mast shall be hot dip
galvanized and suiatble for wind velocity of 180 KMPH as
per IS 875 part 3 including head frame, 2 point suspension
system with steel rope 6mm dia (7/19) construction double
drum winch / power tool operating speed of 900 RPM, and
necessary cable trailer connections and single speed
motor with M 24 x 800 mm foundation bolts of required
quantity with GLS type aviation twin lamp Makes: Bajaj /

quantity with GLS type aviation twin lamp Makes: Aster /
LAASMA / Surya.
Page # 80
1 2 3 4 5
1284 ELEC-6.1.16 a 1 No Fabrication, transportation and supply of 16 Mtrs Polygon 105850
quantity with GLS type aviation twin lamp Makes: Bajaj /
1285 ELEC-6.1.16 b 1 No Fabrication, transportation and supply of 16 Mtrs Polygon 95265

quantity with GLS type aviation twin lamp Makes: Aster /
LAASMA / Surya.

section with 3mm thick of Bottom 400mm / 410mm and Top
150mm / 150mm dia with BSEN - 10025 grade S 355 JO
steel plate for shaft, IS 2062 for base plate, having a base
plate of size 570mm dia 25mm thick with its accessories.
Mast shall be in single section for 12 Mtrs and 2 sections for
16 and 20 Mtrs. Mast shall be hot dip galvanized and
suiatble for wind velocity of 180 KMPH as per IS 875 part 3
including head frame, 2 point suspension system with steel
rope 6mm dia (7/19) construction double drum winch /
power tool operating speed of 900 RPM, and necessary
cable trailer connections and single speed motor with M 24
x 800 mm foundation bolts of required quantity with GLS
type aviation twin lamp of Makes: Bajaj / Valmont /
TRANSRAIL.
Page # 81
1 2 3 4 5
section with 3mm thick of Bottom 400mm / 410mm and Top
150mm / 150mm dia with BSEN - 10025 grade S 355 JO
steel plate for shaft, IS 2062 for base plate, having a base
plate of size 570mm dia 25mm thick with its accessories.
Mast shall be in single section for 12 Mtrs and 2 sections for
16 and 20 Mtrs. Mast shall be hot dip galvanized and
suiatble for wind velocity of 180 KMPH as per IS 875 part 3
including head frame, 2 point suspension system with steel
rope 6mm dia (7/19) construction double drum winch /
power tool operating speed of 900 RPM, and necessary
cable trailer connections and single speed motor with M 24
x 800 mm foundation bolts of required quantity with GLS
type aviation twin lamp of Makes: Aster / LAASMA / Surya.
1288 ELEC-6.1.18 1 No Supply and fixing of suitable feeder piller box made with 14 21085.32
SWG CRCA sheet including S & F of Legrand / Schnieder /
Siemens / ABB / L&T make 40A TP MCB, 6 Nos SP
MCB's, bus bars, 6 Sqmm 3 core copper cable for invidual
light control, contactor, suitable timer and connectors and
provision for energy meter etc., complete for finished item of
work.
1289 ELEC-6.1.19 1 No Supply and fixing of suitable feeder piller box made with 14 22245.29
SWG CRCA sheet including S & F of Legrand / Schnieder /
Siemens / ABB / L&T make 63A TP MCB, 8 Nos SP
MCB's, bus bars, 6 Sqmm 3 core copper cable for invidual
light control, contactor, suitable timer and connectors and
provision for energy meter etc., complete for finished item of
work.
1290 ELEC-6.1.20 1 No Earth work exacavation with a approximate quantity of 4.0 20493.29
Cum for errection of 12 Mtrs high mast and refilling with a
quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade
concrete and (80 Kgs) reinforced steel of 12mm / 10mm /
8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with
cost and conveyance of all above materials including labour
charges for errection of High Mast and Carraige etc
complete.
complete.
Page # 82
1 2 3 4 5
complete.

HT steel plate with a bottom 155mm dia and top 75mm dia,
base plate of size 260mmx260mmx16mm thick welded to
bottom of pole, terminal box with door size of 500mm x
100mm with all accessories connector and fuse base and a
fixing arrangements for advertisements holdings, foundation
bolts with washers and nuts 4 sets. including S&F of 1.5mtrs
sword type decorative single arm bracket with dooms
either sides complete with all accessories as per the
requirements at site and as per the directions of field
engineers during execution for finished item of work. Makes:
Bajaj / Valmont / TRANSRAIL.

HT steel plate with a bottom 155mm dia and top 75mm dia,
bottom of pole, terminal box with door size of 500mm x
100mm with all accessories connector and fuse base and a
fixing arrangements for advertisements holdings, foundation
bolts with washers and nuts 4 sets. including S&F of 1.5mtrs
sword type decorative single arm bracket with dooms
either sides complete with all accessories as per the
requirements at site and as per the directions of field
engineers during execution for finished item of work. Makes:
Aster / LAASMA / Surya.

galvanized 9.0 Mtrs long Conical poles with 3mm thick HT
steel plate with a bottom 173mm dia and top 75mm dia,
bottom of pole, terminal box with door size of
500mmx100mm with all accessories connector and fuse
base and a fixing arrangements for advertisements
holdings, foundation bolts with washers and nuts 4 sets.
including S&F of 1.0 mtrs C type decorative single arm with
painted bracket with dooms either sides complete with all
accessories as per the requirements at site and as per the
directions of field engineers during execution for finished
item of work. Makes Bajaj / Valmont / TRANSRAIL.
Page # 83
1 2 3 4 5
including S&F of 1.0 mtrs C type decorative single arm with
painted bracket with dooms either sides complete with all
accessories as per the requirements at site and as per the
directions of field engineers during execution for finished

including S&F of 1.5 mtrs C type decorative Double arm
with painted bracket with dooms either sides complete with
item of work. Makes: Bajaj / Valmont / TRANSRAIL.

including S&F of 1.5 mtrs C type decorative Double arm
with painted bracket with dooms either sides complete with
1299 Supply of following sizes thermo plastic pole boxes IP 65 0

protection Make : Hensel / Sintex
ELEC-6.1.26 300X150X170 890.6
ELEC-6.1.27 300X300X170 1277.5
ELEC-6.1.28 300X450X170 1741.05
ELEC-6.1.29 300X600X170 2065.9
Page # 84
1 2 3 4 5
1300 ELEC-6.1.30 1 No Erection charges for 7.50 Mts long Octagonal pole on bridge kerb 2336
portion (R.C.C). with 4 Nos 8" Anchor bolts/ M20xsuitable "J" type
bolts etc duly drilling holes to RCC slab and with V.C.C. M.15
concrete for base concreting up to a height of 8" with necessary
Reinforcement work etc. including cost and con veyance of all
material and all labour charges etc. complete as directed by the
department officers.
1301 Supply and transportation of following glass reinforced polymer

(GRP) composite type Conical pole with single arm bracket of
length 1Mtr and internal junction box including labour charges etc.,
complete. Makes: Bajaj / Kemrock / Sumip.
ELEC-6.1.31 1 No 3.00 Mtrs height, Bottom dia 143mm, Top 76mm, AV thickness 6502.84
6mm and to withstand maximum wind velocity 155Km/Hr
1302 Supply and transportation of base bracket suitable for glass 0

reinforced polymer (GRP) composite type pole including labour
charges etc., complete. Makes: Bajaj / Kemrock / Sumip.
ELEC-6.1.36 1 No For 3.00 Mtrs Pole 1204.5

ELEC-6.1.40 1 No For 10.00 Mtrs Pole 4015
CONTROL PANEL BOARD
1304 ELEC-6.2.1 1 Sqin Fabrication and erection of 14SWG CRCA sheet steel 2.4
enclosure for power control cubicle panel / boxes etc.,
including cutting, bending drilling, welding and reveting etc.,
complete with cleaning with 7 tank process and painting with
powder coating including cost and conveyance of all
materials and labour charges.
1305 ELEC-6.2.2 1 Sqin Fabrication and erection of 16 SWG CRCA sheet steel 2.2
Page # 85
1 2 3 4 5
1306 ELEC-6.2.3 1 Sqin Fabrication and erection of 18SWG CRCA sheet steel 1.9
METERING EQUIPMENT
1307 ELEC-6.3.1 1 No Supply and erection of 0-415V volt Digital meter on exisiting 1825
box / panel board including connections etc., complete.
CONZERVE / ELMEASURE / LEGRAND / MECO / HPL MAKE.
1308 ELEC-6.3.2 1 No Supply and erection of 0-415V volt Analog meter on exisiting 328.5
1309 ELEC-6.3.3 1 No Supply and erection of 0-100 / 200 / 400 / 600 /1000 Digital 1825
Ammeter of size 96x96mm on existing box / panel board
including connections etc., complete. CONZERVE /
ELMEASURE / LEGRAND / MECO / HPL MAKE.
1310 ELEC-6.3.4 1 No Supply and erection of 0-100 / 200 / 400 / 600 /1000 Analog 328.5
Ammeter of size 96x96mm on existing box / panel board
including connections etc., complete. CONZERVE /
1311 ELEC-6.3.5 1 No Supply and erection of Digital frequency meter on existing 3325.88
1312 ELEC-6.3.6 1 No Supply and erection of Digital power factor meter, 3 phase, 1971
4 wire balanced or unabalanced load 5A, 415V of size
96x96mm on existing box / panel board including
connections etc., complete. CONZERVE / ELMEASURE /
LEGRAND / MECO / HPL MAKE.
1313 ELEC-6.3.7 1 No Supply and erection of L.T. 3phase Digital multifunction 7316.79
energy meter with 3 lines LCD display for measuring all the
parameters (voltage / Current / Power / frequency / power
factor / kw / kwh / KVAR/ KVARH/) on existing box panel
board including connections etc., complete. CONZERVE /
1314 ELEC-6.3.8 1 No Supply and erection of selector switch for voltmeter / 127.75
Ammeter on the existing box / panel including connections
etc., complete. L&T / C&S / SALZAR / HPL MAKE.
1315 ELEC-6.3.9 1 No Supply and erection of LED indicator lamps on the existing 98.55
box / panel board. L&T / C&S / SALZAR / HPL MAKE.
1316 ELEC-6.3.10 1 No Supply and erection of LT current transformer with bar 328.5
primary 100/5A to 1000 / 5A ratio in the existing box / panel
including connections etc., complete. KAPPA MAKE.
Page # 86
1 2 3 4 5
1317 ELEC-6.3.11 1 No Supply and fixing of single phase Electronic energy 766.5
Meter,240V AC,50 HZ as per IS13010 up to 40A range with
200% over load capacity complete with connections etc.,
complete on the existing board. CONZERVE / ELMEASURE /
MECO / HPL / HAVELLS MAKE.
1318 ELEC-6.3.12 1 No Supply and fixing of three phase Electronic energy Meter, 2217.01
415V AC,50 HZ as per IS13010 up to 40A range with 200%
over load capacity complete with connections etc., complete
on the existing board. CONZERVE / ELMEASURE / MECO / HPL /
HAVELLS MAKE.
1319 ELEC-6.3.13 Supply and fixing of 8 Stage APFC Relay with connection 9928
etc complete.(L&T / Siemens / EPCOS / Schneider /
Elmeasure)
1320 ELEC-6.3.14 Supply and fixing of 14 Stage APFC Relay with connection 12337
etc complete.(L&T / Siemens / EPCOS / Schneider /
Elmeasure)
6.4 SUB STATION EQUIPMENT and TRANSFORMERS
1321 ELEC-6.4.1 1 No Carryout routine maintenance, servicing and testing of 1458.54

630A to 1000A L.T.ACB by cleaning fixed contacts, moving
contacts and arcchutes including servicing and putting the
ACB in perfect working condition after detting all relay and
ON, OFF mechanism etc done with only manufacturing
companies
1322 ELEC-6.4.2 1 No Carryout routine maintenance and servicing of LT.Cubical 1825

pannel board having approximately 15 to 22 Nos of
switches cleaning with power brower and servicing the
contacts, tightning the connection of incoming and outgoing
cables, and clicking the operating machanism for smooth
functioning of switches and putting them in smooth working
condition.
1323 ELEC-6.4.3 1 No Routine maintenance of transformer in operation covering 3175.5

insulation resistance oil, break down strength.
Reconditioning / replacement of silicazel, cleaning of
transformer and topping upto oil level if required (extra cost
will be paid for oil).
1324 ELEC-6.4.4 1 No Testing of Transformer oil for dielectric breakdown strength. 365
1325 ELEC-6.4.5 1 No Removing the existing transformer from the plinth / Pole 1825
and refixing the standby transformer of following capacity
including connections etc., complete.- Upto 315 KVA
1326 ELEC-6.4.6 1 No Removing the existing transformer from the plinth / Pole 2555
and refixing the standby transformer of following capacity
including connections etc., complete. -500 / 1000 KVA
1327 ELEC-6.4.7 1 No Replacing old and unserviceable gasket of top cover plate of 547.5
transformer having following capacity. -Upto 315 KVA
1328 ELEC-6.4.8 1 No Replacing old and unserviceable gasket of top cover plate of 766.5
transformer having following capacity. -500 / 1000 KVA
Page # 87
1 2 3 4 5
1329 ELEC-6.4.9 1 No Replacing old and unserviceable gasket of H. T bushing 219
for the following Transformer capacity. -Upto 315 KVA
1330 ELEC-6.4.10 1 No Replacing old and unserviceable gasket of H. T bushing 401.5

for the following Transformer capacity. -500 / 1000 KVA
1331 ELEC-6.4.11 1 No Replacing old and unserviceable gasket of L.T bushing for 511
the following transformer capacity. Upto 315 KVA
1332 ELEC-6.4.12 1 No Replacing old and unserviceable gasket of L.T bushing for 1058.5
the following transformer capacity. 500 / 1000 KVA
1333 ELEC-6.4.13 1 Kg Replacement the H/T / L. T burntout winding coils of 430.7

distribution transformer including rewinding, varnishing and
vaccuming etc.,duly retaining the removed burnt winding
coils by the Contractor / Firm- For copper coils
1334 ELEC-6.4.14 1 Kg Replacement the H/T / L. T burntout winding coils of 284.7

distribution transformer including rewinding, varnishing and
vaccuming etc.,duly retaining the removed burnt winding
coils by the Contractor / Firm - For aluminium coils
1335 ELEC-6.4.15 1 No Insulating HT / LT copper / aluminium coils for 219

Transformers.
1336 ELEC-6.4.16 1 No Painting with 2 coats Zinchromate red oxide duly scraping 2190
existing paint followed by 2 coats of hammerton grey paint
etc., complete. -Upto 500 KVA
1337 ELEC-6.4.17 1 No Painting with 2 coats Zinchromate red oxide duly scraping 2920
existing paint followed by 2 coats of hammerton grey paint
etc., complete. - 630 / 1000 KVA
1338 ELEC-6.4.18 1 No Replacing H.T bushing for distribution Transformer by new 255.5
one.
1339 ELEC-6.4.19 1 No Replacing H.T bushing metal parts for distribution 277.4
Transformer by new one.
1340 ELEC-6.4.20 1 No Replacing L.T bushing for distribution Transformer by new 120.45
one for the following capacities. - Upto 315 KVA
1341 ELEC-6.4.21 1 No Replacing L.T bushing for distribution Transformer by new 127.75
one for the following capacities.- 500 / 1000 KVA
1342 ELEC-6.4.22 1 No Replacing L.T bushing metal parts for distribution 219
Transformer by new one for the following capacities. -100
KVA
Transformer by new one for the following capacities. -250 /
315 KVA
KVA
KVA
1346 ELEC-6.4.26 1 No Drying the repaired transformer with appropriate heat / air of 2190
following capacity of transformers. -Upto 315 KVA
Page # 88
1 2 3 4 5
1347 ELEC-6.4.27 1 No Drying the repaired transformer with appropriate heat / air of 3066
following capacity of transformers. -500 / 1000KVA
1348 ELEC-6.4.28 1 No Loading and Unloadng of transformer from site to 3285

Workshop or vice verse. -Upto 500 KVA
1349 ELEC-6.4.29 1 No Loading and Unloaidng of transformer from site to 4964
Workshop or vice verse. -630 / 1000 KVA
1350 ELEC-6.4.30 1 Ltr Transformer oild tested as per IS-335 - 1972 (per Ltr) 65.7
1351 ELEC-6.4.31 1 Ltr Filteration of transformer oil as per ISS specifications filters 5.84
to die electric strength above 40 K. V at site. (per Ltr)
1352 ELEC-6.4.32 1 Ltr Filteration of transformer oil as per ISS specifications filters 3.65
to die electric strength above 40 K. V at workshop (per Ltr)
1353 ELEC-6.4.33 1 KVARSupply of MPP type heavy duty capacitor of operating 240.9
voltage not less than 480V and losses not more than 0.35W
per KVAR and inrush current withstand capability 300 times
the rated current. Makes:L&T/Siemens/Schneider/Epcos.

1355 Supply, transportation and delivery at site of 3 Phase, 50 Hz,
oil immersed and naturally cooled, outdoor / Indoor type
copper wound transformer designed and manufactured as
per IS 2026-1977 and 1st filling of oil as per IS 335 of 1993,
connected delta on primary side and Star on secondary side
with additional neutral brought out on load side, 1100V /
(433V / 415V) with HV tapping + or - 2.5% contineously
rated for full load and temporature rise not exceeding 50° C
in oil and 55°C rise by th resistance of the winding after
contineous run on full load rating complete with the following
standard mountings. Makes: Kirloskar / Vijay Electricals /
PETE / Esennar
(Note:Other than these makes / brands mentioned rate may

be allowed as approved by AP Electricity Board).
1. Rated KVA : ........KVA

2. Service: Outdoor / Indoor
3. Mounting : Plinth.
4. Copper wound : Double.
5. Type : Core.
6. Cooling : ONAN
7. Temp . Rise : 55⁰C.
8. Vector Group: Dyn 11
9. Primary Connection : Delta
10. Primary Volts : 11000
11. Primry Frequency : 50
12.Primary Phases : 3
13. Primary wires: 3
14. Secondary connection : Star
15. Secondary Volts : 415 / 433V
16. Secondary phases : 3
17. Secondary wires: 4
18. Taps on primary winding for primary voltage variation :
+7.5% to - 7.5% in steps of 2.5%,
Page # 89
1 2 3 4 5
19. Terminal arrangement.
a. HV: Bare Busings / Cable end box
b. LV : Cable box
20. LV : One separate terminal for earthing.
20. No load losses (Watts): ..........As per IS specification
21. Load losses (Watts): ............As per IS specification
22. Impedance(Z%) : .............As per IS specification
21. Fittings & Accessories.

a. Rating and terminal marking plate
b. Earthing terminals
c. Lifting Lugs
d. Conservator with drain plug.
e. Oil level Indicator
f. Dehydrating silicagel breather
g. Air release device
h. Drain cum filter wall
i. Explosion vent with diaphragm
j. Radiators (Attachable)
k. Seperate neutral bushing
l. Uni directional flat rollers.
ELEC-6.4.35 ……... do……. 63 KVA Copper Wound Transformer 120450
1356 Supply, transportation and delivery at site of 3 Phase, 50 Hz,

Dry type, Indoor type copper wound transformer designed
and manufactured as per IS 2026-1977 and IS 11171-
1985,connected delta on primary side and Star on
secondary side with additional neutral brought out on load
side, 1100V / (433V / 415V) with HV tapping + or - 2.5%
temporature rise by the resistance 90⁰C. complete with the
following standard mountings.Makes: Kirloskar / Vijay
Electricals / PETE / Esennar
(Note:Other than these makes / brands mentioned rate may

be allowed as approved by AP Electricity Board).
Page # 90
1 2 3 4 5
1. Rated KVA : ........KVA (Cast Resin)
2. Service: Indoor
3. Mounting : Floor.
4. Copper wound : Double.
5. Type of cooling : ANAN.
6. Insulation Class : Class F
7. Temparature rise by resistance : 90⁰C
8. Vector Group: Dyn 11
9. Primary Connection : Delta
10. Primary Volts : 11000
11. Primry Frequency : 50
12.Primary Phases : 3
13. Primary wires: 3
14. Secondary connection : Star
15. Secondary Volts : 433V / 415V
16. Secondary phases : 3
17. Secondary wires: 4
18. Taps on primary winding for primary voltage variation :
+5.0% to - 10.0% in steps of 2.5% through links.
19. Terminal arrangement.

a. HV: Cable end box
b. LV : Cable end box
20. No load losses (Watts): ........... As per IS specifications
21. Load losses (Watts): ..............As per IS specifications
22. Impedance(Z%) : ............As per IS specifications
21. Fittings & Accessories.

a. Rating and terminal marking plate
b. Earthing terminals
c. Lifting Lugs
d. Winding temporature Indicator
e. Seperate neutral bushing
f. Uni directional flat rollers.
LIGHTENING PROTECTIVE SYSTEM 0

1357 ELEC-6.5.1 1 No Supply and erecting approved make 11KV, 5KA metal oxide 1095
lightning arrestors suitable for 11 KV supply with necessary
materials on existing cross arm.
1358 ELEC-6.5.2 1 No Supply and erecting porcelain disc type insulator suitable 438
for 11KV line with suitable hardware on existing cross arms.
1359 ELEC-6.5.3 1 No Supply and erecting porcelain pin type insulator suitable for 219
11KV line with suitable hardware on existing cross arms.
Page # 91
1 2 3 4 5
1360 ELEC-6.5.4 1 No Supply and erecting porcelain post type insulator suitable 492.75
for 11KV line with suitable hardware on existing cross
arms.
1361 ELEC-6.5.5 1 No Supply and erecting porcelain pin/shackle type insulator 65.7
suitable for L. T.
1362 ELEC-6.5.6 1 No Supply and fixing of lightning protective system conforming 438
to IS : 2309 with all standard accessories such as metal
globe finials on the top of the builiding with 25.4 mm dia
3.0mtrs. Length of 'B' class G.I pipe etc., complete without
down conductors and earthing.
1363 ELEC-6.5.7 1 No Approved made 11KV, 400A A.B switch with all standard 5110
accessories etc., complete with cost and conveyance of all
materials.
1364 ELEC-6.5.8 1 No Approved made 11KV, 200A A.B switch with all standard 4453
accessories etc., complete with cost and conveyance of all
materials.
1365 ELEC-6.5.9 1 No Approved made 11KV, 200A A.B switch (tilting) with all 4307
standard accessories etc., complete with cost and
conveyance of all materials.
1366 ELEC-6.5.10 1 No 11KV, H.G fuse set including all standard accessories etc., 2920
complete with cost and conveyance of all materials.
1367 ELEC-6.5.11 1 Km Supply of 7/3.15 AAA C all Alluminium annealed conductor 18259.49
Rabit.
1368 ELEC-6.5.12 1 Km Supply of 7/2.50 AAA C all Alluminium annealed conductor 11229.59
Weasel.
1369 ELEC-6.5.13 1 No Supply of 9.1 Mtr PSCC Pole 280 Kg Working load. 2284.17
1370 ELEC-6.5.14 1 No Supply of 8.0 Mtr PSCC Pole 140 Kg Working load. 1215.45
1371 ELEC-6.5.15 1 Kg Supply of 175 x 85 mm / 150 x 75 mm RS Joist. 36.5

1372 ELEC-6.5.16 1 No Supply and installation of NIMBUS CPT-3/NLP 2200 / 93440
FOREND(ESE-EU) Advanced lighting protection with
capturing head of 135 - 210mm diameter, 205 -580mm
height and 4.60 - 4.940 kgs , and having Rod length
760mm, weight 1.795 kgs with stainless steel rod, working
on the principle of (ESE) Early Streamer Emission
technology, having a coverage radius of 79mts when
mounted on 10 - 15 mts height of existing lattice tower
giving level 1 protection and anticipation emission time of 60
micro seconds/72 micro seconds. The NIMBUS is
manufactured according to standard NFC 17 102 and UNE
21186-96 including functional integrity etc Complete. Make :
NIMBUS / FOREND or equivalent
Page # 92
1 2 3 4 5
1373 ELEC-6.5.17 1 No Installation and commissioning of NIMBUS / FOREND or 22776
equivalent advanced lighting protection systems which
includes
1. Laying of CC Bed
2. Installation of Lighting Rod
3. Laying of Down conductor
4. Installation of Counter
5. Installation of Earth Electrodes
6. Interconnection between the Electrodes
7. Termination of down conductor to earth bus etc complete
1374 ELEC-6.5.18 1 Pt Supply of electro-Mechanical counter (Make: CIRPROTEC / 11680

INDALAC/INGESCO)
1375 ELEC-6.5.19 1 Pt Providing earth electrode of low carbon steel rod of 17mm 7008
dia coated with 250 microns thick copper 3mtr long with
clamps and 2 bags of LORESCO ZEROLITE back fill compound
etc complete (As per drawings enclosed)
1376 ELEC-6.5.20 1 Mtr Supply of down conductor of 1x70sqmm single core PVC 299.3
insulated unarmoured copper conductor cable of ISI mark
(Make: Polycab / Havells / RPG / RR Kabel)
7.1 NET WORKING 0

1377 ELEC-7.1.1 100 Mtrs Supply of 2 Pair, 0.5mm telephone copper wire of makes 833.25
Finolex / Delton / Surabi / Polycab / Nakoda / GM.
1378 ELEC-7.1.2 100 Mtrs Supply of 5 Pair telephone copper wire of makes Finolex / 2310
Delton / Surabi / Polycab / Nakoda / GM.
1379 ELEC-7.1.3 Deleted From SOR 12-13 ELEC-7.1.3 0

1380 ELEC-7.1.4 100 Mtrs Supply of LAN Cable cat - 6 UTP cable of makes D Link / 2128.5
AMP / Molex / Legrand / Krone.
1381 ELEC-7.1.5 1 No Supply of Cat 6 RJ-45 information outlets including duel 280.5
face plate of makes D Link / AMP / Molex / Legrand / Krone.
1382 ELEC-7.1.6 1 No Supply of 24 Port switches of makes D link / CISCO / Net 4290
Gear / HP.
1383 ELEC-7.1.7 1 No Supply of 8 Port switches of makes D link / CISCO / Net 1018.875
Gear / HP.
1384 ELEC-7.1.10 1 No Supply of 3200 access point of makes D link / CISCO / Net 10312.5
Gear / HP.
1385 ELEC-7.1.11 1 No Supply of 7 feet length moulded patch cord of makes D 181.5
Link / AMP / Molex / Legrand / Krone.
1386 ELEC-7.1.12 1 No Supply of 3 feet length moulded patch cord of makes D 165
Link / AMP / Molex / Legrand / Krone.
1387 ELEC-7.1.13 1 No Supply of 24 port patch panels of makes D Link / AMP / 5362.5
Molex / Legrand / Krone.
1388 ELEC-7.1.14 1 No Supply of 100 pair MDF loaded with 2/10 Modular of Krone 3036
make or its equivalent.
1389 ELEC-7.1.15 1 Mtrs Supply of 100 Pair raiser cable for telephone makes Finolex 319.275
/ Delton / Surabi / Polycab.
1390 ELEC-7.1.16 1 Mtr Supply of 10 Pair telephone Copper wire of makes Finolex / 33
Delton / Surabi / Polycab / Nakoda.
1391 ELEC-7.1.17 1 Mtr Supply of 20 Pair telephone Copper wire of makes Finolex / 62.7
Delton / Surabi / Polycab / Nakoda.
Page # 93
1 2 3 4 5
1392 ELEC-7.1.18 1 Mtr Supply of 50 Pair telephone Copper wire of makes Finolex / 160.875
Delton / Surabi / Polycab.
1393 ELEC-7.1.19 1 No Supply of 10 pair Telephone distribution box with back 536.25
mount frame, krone connector, powder coated metal body
with lock and key arrangement.
1397 ELEC-7.1.23 1 No Supply of 6U floor mounting net work rack with power spike 3877.5
including all accessories of make HCL / Vall.
1398 ELEC-7.1.24 1 No Supply of 9U floor mounting net work rack with power spike 4603.5
including all accessories of make HCL / Vall.
1399 ELEC-7.1.25 1 No Supply of 12U floor mounting net work rack with power 5349.3
spike including all accessories of make HCL / Vall.
1403 ELEC-7.1.27 1 Mtrs Supply of 6 Core (Indoor / Out door), Single mode armourd, 61.875
Optic fibre cable of makes D Link / AMP / Molex / Legrand /
Krone.
1404 ELEC-7.1.28 1 Mtrs Supply of 12 Core (Indoor / Out door), Single mode 86.625
armourd, Optic fibre cable of makes D Link / AMP / Molex /
Legrand / Krone.
1405 ELEC-7.1.29 1 No Supply of 6 port fibre distribution unit. (FDU / LIU) loaded 6187.5
with couplers etc complete of makes D Link / AMP / Molex /
Legrand / Krone.
1406 ELEC-7.1.30 1 No Supply of 12 port fibre distribution unit. (FDU / LIU) loaded 7837.5
with couplers etc complete of makes D Link / AMP / Molex /
Legrand / Krone.
1407 ELEC-7.1.31 1 No Supply of Subscriber connector (SC) to SC / LC patch card 1650
of 1 Mtr length of makes D Link / AMP / Molex / Legrand /
Krone.
1408 ELEC-7.1.32 1 No Supply of Pigtails for fibre core connectivity of makes D Link 288.75
/ AMP / Molex / Legrand / Krone.
1409 ELEC-7.1.33 1 No Supply of Cat 6 RJ-45 information outlets including Single 206.25
face plate of makes D Link / AMP / Molex / Legrand / Krone.
RACEWAYS AND JUNCTION BOXES 0
Page # 94
1 2 3 4 5
1410 ELEC-7.1.34 1 Mtrs Supply of 100mm x 38mm G I Raceways of 2mm thick with 379.5
top cover and required hard ware etc complete.
1414 ELEC-7.1.38 1 Mtrs Supply of 150mm x 25mm G I Raceways of 2mm thick with 462
1416 ELEC-7.1.40 1 No Supply of 172mm x 52mm G.I. Junction box of 2mm thick 280.5
for direct acces to cables at the inter section of Raceways.
MISSILLANEOUS ITEMS
1422 ELEC-8.1.4 1 No Supply of single fancy bracket with glass shade best Indian 195
make
1423 ELEC-8.1.5 1 No Supply of double fancy bracket with glass shade best Indian 350
make
1424 ELEC-8.1.6 1 No Supply of 10" ceiling fittings with glass doom best Indian 175
make
1425 ELEC-8.1.7 1 No Supply of Bulk head fitting with cast aluminium enamel 360
painted body with water tight, clear glass with wire guard
hinged with lock and key arrangements etc., complete of
makes Bajaj / Crompton / Surya.
1426 ELEC-8.1.8 100 Nos TW Seperators / Gutties 150

1427 ELEC-8.1.9 100 Nos Rawl Plugs 25
1428 ELEC-8.1.10 100 Nos U Nails 40
1429 ELEC-8.1.11 144 Nos Alluminium Link Clips 50
1430 ELEC-8.1.12 1 Set 50 mm G.I.Nut and Bolts. 12
1431 ELEC-8.1.13 1 Set 63 to 100 mm G.I.Nut and Bolts. 22
1432 ELEC-8.1.14 1 Doz 50 mm 0 Gauge Nails 40
1433 ELEC-8.1.15 1 Doz 63 to 100 mm 0 Gauge Nails 66
1434 ELEC-8.1.16 1 Kg Hard Coke 8
1435 ELEC-8.1.17 1 Kg Salt 4
1436 ELEC-8.1.18 100 Nos PVC Cleats 2 Way 300
1437 ELEC-8.1.19 100 Nos PVC Cleats 4 Way 400
1438 ELEC-8.1.20 1 Kg Binding Wire 55
1439 ELEC-8.1.21 1 No PVC / Cotton Insulation tape Role ( 10 Mtrs) 15
1440 ELEC-8.1.22 1 No C.I.Knob 12
1441 ELEC-8.1.23 1 Pair Stay tight set (Jum bracket 300 mm) 275
Page # 95
1 2 3 4 5
1442 ELEC-8.1.24 1 SetStay clamp with bolts and Nuts) 176
1443 ELEC-8.1.25 1 No L.T.Guy insulator 46
1444 ELEC-8.1.26 1 No 12 / 15 MS plain rod fan hook 20
1445 ELEC-8.1.27 1 Rm 19 / 20 mm Steel tube fan down rod 60
1446 ELEC-8.1.28 1 No Consealed box PVC / MS with hook for fan 80
1447 ELEC-8.1.29 1 No Coil Earthing 60
1448 ELEC-8.1.30 1 No Cable root Indicators 75
1449 ELEC-8.1.31 1 Set40 mm x 40 mm x 6 mm angle iron with I bolt. 220
1450 ELEC-8.1.32 1 Kg Mild Steel Items 55
1451 ELEC-8.1.33 Deleted From SOR 10-11 ELEC-8.1.33 0
1452 ELEC-8.1.34 1 No Acrylic Cover of size 4" x 7" for night lamps. 15
1453 ELEC-8.1.35 1 No TW / PVC Round Blocks 6
1454 ELEC-8.1.36 1 No G.I.Funnel with Mesh 1/2" x 4" 75
1455 ELEC-8.1.37 1 Sqft Asbestos Sheet 20
1456 ELEC-8.1.38 1 No First Aid box 18" x 12" x 8" 1000
1457 ELEC-8.1.39 1 No 11 KV/22 KV Hand gloves 140
1458 ELEC-8.1.40 1 Kg Copper plate / Copper strip (Per K.G) 550
1459 ELEC-8.1.41 1 Kg No. 8/10 SWG copper wire (per K.G) 550
1460 ELEC-8.1.42 1 Kg PVC Insulated copper winding wire of fine quality (per K. G) 660
1461 ELEC-8.1.43 1 Kg No. 14 SWG copper wire (per K. G) 550

1462 ELEC-8.1.44 1 Kg Copper winding wire (per K. G) 637
1463 ELEC-8.1.45 1 Kg G.I. Strip / Plate / Wire (per K. G) 62
1464 ELEC-8.1.46 1 Kg Alluminum Bus bars/Strips/accessories 213
1465 ELEC-8.1.47 1 Kg Alluminum winding wire 293
1466 ELEC-8.1.48 25 Nos 6.2 Volt series bulb (25 Nos.) 83
1467 ELEC-8.1.49 25 Nos 6.2 Volt series bulb with navar plate(25 Nos.) 88
1468 ELEC-8.1.50 1 No Supply of Rotating machine 15000
1469 ELEC-8.1.51 1 Kg Supply and fixing of 6mm thick MS Chekered plate. 61
1470 ELEC-8.1.52 1 Kg Supply and fixing of 6mm thick Alluminium Chekered plate. 242
1471 ELEC-8.1.53 1 Kg Copper old winding Wire scrap for 1 Kg 150

1472 ELEC-8.1.54 1 Kg Cement 5.6
1473 ELEC-8.1.55 1 Sqin Hylam Sheet 0.6
1474 ELEC-8.1.56 1 Cum Earth work excacvation including all soils for trench, Pole Pit 200
and Earth Pit.
1475 ELEC-8.1.57 1 Cum Cost of Sand 540
1476 ELEC-8.1.58 1000 Nos Cost of Bricks 3472
1477 ELEC-8.1.59 1 Mtr 25mm Nominal Bore light grade G.I.Pipe 205
1478 ELEC-8.1.60 1 Mtr 25mm Nominal Bore Medium grade G.I.Pipe 220
1479 ELEC-8.1.61 1 Mtr 40mm Nominal Bore light grade G.I.Pipe 323
1480 ELEC-8.1.62 1 Mtr 40mm Nominal Bore Medium grade G.I.Pipe 346
1481 ELEC-8.1.63 1 No Drilling of 16 Nos through holes of 12mm dia to G.I pipe 5
1482 ELEC-8.1.64 1 Set

G.I Nuts, Bolts an Washers each set 10
1483 ELEC-8.1.65 1 No18" dia 2" thick hume pipe ring 200
1484 ELEC-8.1.66 1 No18" dia 3" hume pipe ring 250
1485 ELEC-8.1.67 1 No2" thick CC cover for hume pipe ring with handle. 110
1486 ELEC-8.1.68 100 Nos
Supply of Saddle / Clamps suitable for fixing 2 Core 4 to 10 226
Sqmm Cable.
1487 ELEC-8.1.69 100 Nos Supply of Saddle / Clamps suitable for fixing 4 Core 4 & 6 226
Sqmm Cable.
1488 ELEC-8.1.70 100 Nos Supply of Saddle / Clamps suitable for fixing 4 Core 10 & 16 285
Sqmm Cable.
1489 ELEC-8.1.71 100 Nos Supply of Saddle / Clamps suitable for fixing 3.5 Core 25 & 347
35 Sqmm Cable.
Page # 96
1 2 3 4 5
1490 ELEC-8.1.72 100 Nos Supply of Saddle / Clamps suitable for fixing 3.5 Core 50 495
Sqmm Cable.
95 Sqmm Cable.
1492 ELEC-8.1.74 100 Nos Supply of Saddle / Clamps suitable for fixing 3.5 Core 120 to 660
185 Sqmm Cable.
300 Sqmm Cable.
1494 ELEC-8.1.76 100 Nos Supply of Saddle / Clamps suitable for fixing 3.5 Core 400 1100
Sqmm Cable.
LABOUR RATES
1495 ELEC-8.1.77 1 No Skilled Electrician 400
1496 ELEC-8.1.78 1 No Semi Skilled Electrician / Lineman 320
1497 ELEC-8.1.79 1 No Skilled Mason 350
1498 ELEC-8.1.80 1 No Semi Skilled Mason 320
1499 ELEC-8.1.81 1 No Skilled Welder 350
1500 ELEC-8.1.82 1 No Semi Skilled Welder 0
1501 ELEC-8.1.83 1 No Skilled Fitter 350
1502 ELEC-8.1.84 1 No Semi Skilled Fitter 320
1503 ELEC-8.1.85 1 No Helper (Electrical) 320
1504 ELEC-8.1.86 1 No Skilled Carpenter 350
1505 ELEC-8.1.87 1 No Semi Skilled Carpenter 320
1506 ELEC-8.1.88 1 No Man Mazdoor 280
1507 ELEC-8.1.89 1 No DG Set operator/Air Compressor 350
1508 ELEC-8.1.90 1 No 2nd Class DG Set operator/Air Com 320
1509 ELEC-8.1.91 1 No Plumber (Licensed)/Pipe Fitter 400
1510 ELEC-8.1.92 1 No Painter Class -2 320
1511 ELEC-8.1.93 1 No Diploma Engineer / Surveyor 500
1512 ELEC-8.1.94 1 No Graduate Engineer 670
1513 ELEC-8.1.95 1 No ITI Certificate holder 400
1514 ELEC-8.1.96 1 No Stenographer / Computer Operator 440
1515 ELEC-8.1.97 1 No Supply and fixing of Anchor fastner with fan hook / Providing 80
MS Fan hook with grouting and cement plastering.
9.1 WIRELESS FIRE ALARAM SYSTEM

1516 ELEC-9.1.1 1 No Supply and fixing of wireless smoke detection control panel 30784.83
of 28 wireless zones, 2 Hard wired Zones, Tamper Alert,
Pass code protected, RF jamming recognition, diagnostic
feature for RF signal strength between panel and each
detector, vent reporting using PSTN telephone line, dialing
upto 4 telephone numbers, event reporting as per users
choice, LCD screen display, two way voice interaction,
battery backup stand by time up to 12 hrs. (Cease Fire /
Visonic / Honeywell / Secutron) Including transportation, all
taxes and all labour charges etc complete.
1517 ELEC-9.1.2 1 No Supply and fixing of Wireless Repeater.The wireless 7271.53

repeater extends the communication range of detection by
relaying data between receiver and remote wireless
transmitter. (Cease Fire / Visonic / Honeywell / Secutron)
Including transportation, all taxes and all labour charges etc
complete.
Page # 97
1 2 3 4 5
1518 ELEC-9.1.3 1 No Supply and fixing of Wireless Siren Strobe external wireless 10180.58
siren - a fully supervised power code outdoor (IP55) wireless
Siren and strobe light. Designed for external installation.
Wire - Free connection between control panel and siren.
Convenient rapid no- mess installation. Separate fire alarm
signals, 98db Piezo siren and high power strobe light.
Weather resistant, IP55, 2-way communication for local and
remote diagnostics. Plug-in power supply, NIMH
rechargeable back-up power battery, transmits status,
tamper, low- battery, supervisory and AC loss messages to
the control panel, Tri- State tamper switch identifies screw
manipulation removal of cover or playing from the
wall.(Cease Fire / Visonic / Honeywell / Secutron) Including
transportation, all taxes and all labour charges etc complete.
1519 ELEC-9.1.4 1 No Supply and fixing of wireless Fully Supervised Smoke 5090.29
Detector, Photoelectric detection technology for superior
detection sensitivity , sound and transmitted for smoke,
tamper and low battery, works on power code protocol, easy
programming and enrolling to the control panel, long life 9
volt alkaline or lithium battery. (Cease Fire / Visonic /
Honeywell / Secutron) Including transportation, all taxes and
all labour charges etc complete.
9.2 ADDRESSABLE - FIRE ALARM SYSTEM 0

1520 ELEC-9.2.1 1 No Supply, Installation, testing and commissioning of wall 502787.5
mounting 10 loop micro processor based analog
addressable fire control panel expandable by minimum 2
additional loops with minimum 80 character LCD display 4
access levels 1000 events, historical
logging, flash E-PROM, 240 volts A C Power supply,
automatic battery charger, 24V SLA batteries suitable for
operating the entire system including tack back units and
the hooters/strobes for a minimum of 4 hours in battery
condition the panel shall have suitable power amplifiers for
hooter / strobes the panel shall be capable beeing
integrated with the BMS system and shall include cost of
supply, installation of any additional modules or interfaces
required for the same. The panel shall be completed as per
the specification and as required fixing of 10 loop Micro
processor based Fire Alarm control panel with zonal
indictions and battery back up as per detailed
specifications.(Makes: Notifier / Edwards).
Page # 98
1 2 3 4 5
access levels 1000 events, historical logging, flash E-
PROM, 240 volts A C Power supply, automatic battery
charger, 24V SLA batteries suitable for operating the entire
system including tack back units and the hooters/strobes for
a minimum of 4 hours in battery condition the panel shall
have suitable power amplifiers for hooter / strobes the panel
shall be capable beeing integrated with the BMS system and
shall include cost of supply, installation of any additional
modules or interfaces required for the same. The panel shall
be completed as per the specification and as required fixing
of 10 loop Micro processor based Fire Alarm control panel
with zonal indictions and battery back up as per detailed
specifications.(Makes: Siemens / Morley / Bosch).

specifications. (Makes: Notifier / Edwards).
Page # 99
1 2 3 4 5
1523 ELEC-9.2.4 1 No Supply, Installation, testing and commissioning of wall 325945
mounting 8 loop micro processor based analog addressable
fire control panel expandable by minimum 2 additional loops
with minimum 80 character LCD display 4 access levels
1000 events, historical logging, flash E-PROM, 240 volts A
C Power supply, automatic battery charger, 24V SLA
batteries suitable for operating the entire system including
tack back units and the hooters/strobes for a minimum of 4
hours in battery condition the panel shall have suitable
power amplifiers for hooter / strobes the panel shall be
capable beeing integrated with the BMS system and shall
include cost of supply, installation of any additional modules
or interfaces required for the same. The panel shall be
completed as per the specification and as required fixing of
8 loop Micro processor based Fire Alarm control panel with
zonal indictions and battery back up as per detailed

specifications. (Makes: Notifier / Edwards).
Page # 100
1 2 3 4 5
specifications. (Makes: Siemens / Morley / Bosch).

Page # 101
1 2 3 4 5

Page # 102
1 2 3 4 5

Page # 103
1 2 3 4 5
1532 ELEC-9.2.13 1 No Supply, Installation, testing and commissioning of intellegent 86687.5

analogue addressable Repeater panel including the cost of
mounting accessories complete as per specification as
required. (Makes: Notifier / Edwards).
1533 ELEC-9.2.14 1 No Supply, Installation, testing and commissioning of intellegent 77672

analogue addressable Repeater panel including the cost of
mounting accessories complete as per specification as
required. (Makes: Siemens / Morley / Bosch).
1534 ELEC-9.2.15 1 No Supply and fixing of addressable wall mounting strobes cum 4681.49
hooters including the cost of mounting accessories
complete as per specifications and as required including
testing and commissioning. (Makes: Notifier / Edwards).
1535 ELEC-9.2.16 1 No Supply and fixing of addressable wall mounting strobes cum 4161
hooters including the cost of mounting accessories
complete as per specifications and as required including
testing and commissioning. (Makes: Siemens / Morley /
Bosch).
1536 ELEC-9.2.17 1 No Supply and installation of addressable analogue manual call 4542.79
point with resetable flexible element to initiate alaram
including the cost of mounting accessories etc. complete.
(Makes: Notifier / Edwards).
1537 ELEC-9.2.18 1 No Supply and installation of addressable analogue manual call 4091.65
point with resetable flexible element to initiate alaram
including the cost of mounting accessories etc. complete.
(Makes: Siemens / Morley / Bosch).
1538 ELEC-9.2.19 1 No Supply and instllation of intallegent analogue addressable 4646.45

photo electric smoke detector including cost of base plate
etc., complete as per specification with required fittings and
accessories. (Makes: Notifier / Edwards).
Page # 104
1 2 3 4 5
1539 ELEC-9.2.20 1 No Supply and instllation of intallegent analogue addressable 4161
photo electric smoke detector including cost of base plate
etc., complete as per specification with required fittings and
accessories. (Makes: Siemens / Morley / Bosch).
1540 ELEC-9.2.21 1 No Supply and installation of intallegent analogue addressable 3693.07

rate of rise cum fixed temparature heat detectors including
the cost of base plate. 75mm dia MS outlet box for fixing of
the detector base, mounting accessories etc., complete as
per specifications and as required. (Makes: Notifier /
Edwards).
1541 ELEC-9.2.22 1 No Supply and installation of intallegent analogue addressable 3328.8

rate of rise cum fixed temparature heat detectors including
the cost of base plate. 75mm dia MS outlet box for fixing of
the detector base, mounting accessories etc., complete as
per specifications and as required. (Makes: Siemens /
Morley / Bosch).
1542 ELEC-9.2.23 1 No Supply and installation of intalligent analogue addressable 4507.75

multi criterion detectors below false ceiling/on ceiling
including the cost of base plate. 75mm dia MS outlet box for
fixing of the detector base, mounting accessories etc.,
complete as per specifications and as required. (Makes:
Notifier / Edwards).
1543 ELEC-9.2.24 1 No Supply and installation of intalligent analogue addressable 4057.34

multi criterion detectors below false ceiling/on ceiling
including the cost of base plate. 75mm dia MS outlet box for
fixing of the detector base, mounting accessories etc.,
Siemens / Morley / Bosch).
1544 ELEC-9.2.25 1 No Supply and Installation of Intalligent analogue addressable 3814.25

Control Modules including the cost of mounting accessories

Control Modules including the cost of mounting accessories

monitor modules including the cost of mounting accessories

monitor modules including the cost of mounting accessories
Page # 105
1 2 3 4 5
fault isolator modules including the cost of mounting
accessories complete as per specifications and complete as
required. (Makes: Notifier / Edwards).
1549 ELEC-9.2.30 1 No Supply and Installation of Intalligent analogue addressable 2774

fault isolator modules including the cost of mounting
accessories complete as per specifications and complete as
required. (Makes: Siemens / Morley / Bosch).
9.3 CONVENTIONAL - FIRE ALARM SYSTEM 0

1550 ELEC-9.3.1 1 No Supply, Installation, testing and commissioning of 5475
conventional Micro processor based Fire Alarm panel with 2
zone, 12V SMF batteries etc., complete with all standard
accessories. (Makes: System Censor / Ravel / Pinnacle)




conventional Micro processor based Fire Alarm panel with
10 zone, 12V SMF batteries etc., complete with all standard


1557 ELEC-9.3.8 1 No Supply and installation of Repeater panel including the cost 9125
of mounting accessories complete as per specifications and
as required. (Makes: System Censor / Ravel / Pinnacle)
1558 ELEC-9.3.9 1 No Supply and installation of duel tone electronic hooter of 492.75
85dB including the cost of mounting accessories complete
as per specifications and as required.
1559 ELEC-9.3.10 1 No Supply and installation of dust and vermin proof manual call 474.5
point to initiate audio visual alarm including the cost of
mounting accessories complete as per specifications and as
required.
Page # 106
1 2 3 4 5
1560 ELEC-9.3.11 1 No Supply and installation of response indicators for above 109.5
false ceiling detectors.
1561 ELEC-9.3.12 1 No Supply and installation of plug - in type multi criterion 1314
detectors including the cost of base plate. 75mm dia M.S.
outlet box for fixing of the detector base. Mounting
accessories etc., complete as per specifications as required.
(Makes: System Censor / Ravel / Pinnacle)
1562 ELEC-9.3.13 1 No Supply and installation of plug -in type photo electric smoke 1277.5
detectors including the cost of base plate. 75mm dia MS
outlet box for fixing of the detector base. Mounting
accessories etc complete and as per specifications and as
required. (Makes: System Censor / Ravel / Pinnacle)
1563 ELEC-9.3.14 1 No Supply and installation of plug -in type rate of rise cum fixed 1241
temperature heat detectors including the cost of base plate.
75mm dia MS outlet box for fixing of the detector base,
mounting accessories etc., complete as per specifications
and as required. (Makes: System Censor / Ravel / Pinnacle)
9.4 FIRE EXTINGUISHERS

1564 ELEC-9.4.1 1 No Supply and fixing of ABC stored pressure squeeze grip type 6576.57
fire extinguishers, 10 kg capacity, ISI CE marked Is:13849
filled with ABC Mono Ammonium Phosphate base powder-
90 pressurized with dry Nitrogen Gas at 15 Kg / sqcm
complete with discharge hose and wall mounting bracket,
Insta Alert facility, 2mm Mild Steel, EPDM Rubbers,
Pressure Guage, which work effectively on all class of fires
(A, B, C & Electrical fires) with 5 years warranty (Cease Fire
/ Minimax make) Including transportation, all taxes and all
labour charges etc complete.
1565 ELEC-9.4.2 1 No Supply and fixing of ABC stored pressure squeeze grip type 4667.62
fire extinguishers, 10 kg capacity, ISI CE marked Is:13849
filled with ABC Mono Ammonium Phosphate base powder-
50 pressurized with dry Nitrogen Gas at 15 Kg / sqcm
complete with discharge hose and wall mounting bracket,
2mm Mild Steel, EPDM Rubbers, Pressure Guage, which
work effectively on all class of fires (A, B, C & Electrical
fires) with 2 years warranty (Safex / Kenex / Bharat /
Reliance make) Including transportation, all taxes and all
Page # 107
1 2 3 4 5
1566 ELEC-9.4.3 1 No Supply and fixing of ISI make ABC Power MAP 5 Kg Fire 4497.53
extinguisher Mono ammonium phosphate power 90, stored
pressure type, pressure gauge gross wt. 8 kg, empty wt.3
kg, can Ht.449mm, Diameter 150mm, Discharge time less
than 15 sec, controllable discharge mechanism, range min.
4 mts applicable on classes A,B, C & electrically started
fires, A- rating 144A, B-rating 89B, can construction: Deep
drawn Co2 mig welding, wall construction: Forging &
Machining, internal coating of can: Epoxy power coating,
External coating of Can:Epoxy polyster powder coating,
sheet metal thickness:1.80mm, Helium leakage detection
tested, insta - alert, ISI & EN approved with 5 years warranty
(Cease Fire / Minimax make) Including transportation, all
4 mts applicable on classes A,B, C & electrically started
fires, A- rating 144A, B-rating 89B, can construction: Deep
drawn Co2 mig welding, wall construction: Forging &
Machining, internal coating of can: Epoxy power coating,
External coating of Can:Epoxy polyster powder coating,
sheet metal thickness:1.80mm, Helium leakage detection
tested, ISI & EN approved with 2 years warranty (Safex /
Kenex / Bharat / Reliance make) Including transportation,
all taxes and all labour charges etc complete.
4 mts applicable on classes A,B, C electrically started fires,
A- rating 144A, B-rating 89B, can construction: Deep drawn
Co2 mig welding, wall construction: Forging & Machining,
internal coating of can: Epoxy power coating, External
coating of Can:Epoxy polyster powder coating, sheet metal
thickness:1.80mm, Helium leakage detection tested, insta -
alert, ISI & EN approved with 5 years warranty (Cease Fire /
Minimax make) Including transportation, all taxes and all
Page # 108
1 2 3 4 5
4 mts applicable on classes A,B, C electrically started fires,
A- rating 144A, B-rating 89B, can construction: Deep drawn
Co2 mig welding, wall construction: Forging & Machining,
internal coating of can: Epoxy power coating, External
coating of Can:Epoxy polyster powder coating, sheet metal
thickness:1.80mm, Helium leakage detection tested, ISI &
EN approved with 2 years warranty (Safex / Kenex / Bharat
/ Reliance make) Including transportation, all taxes and all
1570 ELEC-9.4.7 1 No Supply and fixing of ISI make Ceiling Mounted ABC MAP 4836.25
90, 5 Kg stored pressure type, pressure gauge, Gross
Wt.7.7 kg, Empty Wt.2.7 kg, Can Ht226mm , Dia 230mm,
Discharge time : less than 8 sec, Auto discharge
mechanism on temperature rise, Applicable on A,B,C, &
Electrically - started fires, Can Construction: Forging &
Machining, Internal coating of Can: Epoxy Power coating,
External Coating of Can: Epoxy Polyster powder coating,
sheet metal thickness:1.80mm , Helium leakage detection
tested, Insta - alert, ISI & EN approved with 5 years warranty
(Cease Fire / Minimax make) Including transportation, all
1571 ELEC-9.4.8 1 No Supply and fixing of ISI make Ceiling Mounted ABC MAP 3897.47
50, 5 Kg stored pressure type, pressure gauge, Gross
Wt.7.7 kg, Empty Wt.2.7 kg, Can Ht226mm , Dia 230mm,
Discharge time : less than 8 sec, Auto discharge
mechanism on temperature rise, Applicable on A,B,C, &
Electrically - started fires, Can Construction: Forging &
Machining, Internal coating of Can: Epoxy Power coating,
External Coating of Can: Epoxy Polyster powder coating,
sheet metal thickness:1.80mm , Helium leakage detection
tested, ISI & EN approved with 2 years warranty (Safex /
Kenex / Bharat / Reliance make) Including transportation,
all taxes and all labour charges etc complete.
Page # 109
1 2 3 4 5
1572 ELEC-9.4.9 1 No Supply and fixing of 2 Kg Fire exitinguisher Clean Agent 10125.1
HFC 236, Zero ODP, Stored pressure type, pressure guage,
gross weight 3.6Kg empty weight 1.6 Kg, can weight
341mm, Diameter 108mm, discharge time minimum 6 secs,
controllable discharge mechanism, range minimum 2
meters, applicable on class A,B,C and electrically started
Fire, A rating 5A, B rating 34B, can construction: Deep
drawn & CO2 mig welded, Valve construction: Forging &
Machining, Internal coating of Can: Epoxy powder coating,
External coating of can: Epoxy polyster powder coating,
sheet metal thickness: 1.60 mm, Helium leak detection
tested, 5 Years warranty.(Makes: Ceasefire / Minimax)
1573 ELEC-9.4.10 1 No Supply and fixing of 4 Kg Fire exitinguisher Clean Agent 17822.95
HFC 236, Zero ODP, Stored pressure type, pressure guage,
gross weight 6.9Kg empty weight 2.9 Kg, can weight
435mm, Diameter 140mm, discharge time minimum 9 secs,
controllable discharge mechanism, range minimum 4
meters, applicable on class A,B,C and electrically started
Fire, A rating 8A, B rating 55B, can construction: Deep
drawn & CO2 mig welded, Valve construction: Forging &
Machining, Internal coating of Can: Epoxy powder coating,
External coating of can: Epoxy polyster powder coating,
sheet metal thickness: 1.60 mm, Helium leak detection
tested, 5 Years warranty.(Makes: Ceasefire / Minimax)
1574 ELEC-9.4.11 1 No Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg 7271.53
capacity confirming to IS 2878 made from ISI marked
steam less cylinder confirming to IS:7285 & CE certified and
fitted with ISI marked controlled valve confirming to
IS:3224, high pressure 1 Mtr discharge hose & horn
complete with initial gas charged with carrying handle with
wheels and wall mounting bracket. Squeeze lever
discharge, used un-used indicator, Aphoxy coated paint
(Red) with 93% gloss with 2 years warranty (Cease Fire /
Minimax make) Including transportation, all taxes and all
1575 ELEC-9.4.12 1 No Supply and fixing of Co2 type Fire Extinguishers 4.5 Kg 5450.91
capacity confirming to IS 2878 made from ISI marked steam
less cylinder confirming to IS:7285 & CE certified and fitted
with ISI marked controlled valve confirming to IS:3224, high
pressure 1 Mtr discharge hose & horn complete with initial
gas charged with carrying handle with wheels and wall
mounting bracket. Squeeze lever discharge, used un-used
indicator, Aphoxy coated paint (Red) with 93% gloss with 2
years warranty (Safex / Kenex / Bharat / Reliance make)
Including transportation, all taxes and all labour charges etc
complete.
Page # 110
1 2 3 4 5
1576 ELEC-9.4.13 1 No Supply and fixing of DCP powder type cylindrical shape fire 1533
extinguisher 2 Kg with fixing hangers, hose, brackets,
screws to required size etc., complete as per IS:13849 - wall
mounted type. (Makes: Minimax / Safex / Kenex /
Reliance)
Reliance)
Reliance)
1579 ELEC-9.4.16 1 No Supply and fixing of Escape signage boards in Rigid Photo 949
luminecent based glow in Dark rigid sheet with high intensity
luminous properties with specificaiton of Cease Fire or its
equivalent make Model-1ES01
1580 ELEC-9.4.17 1 No Supply and fixing of Cease fire or its equivalent Escape gear 10957.3
Mild Steel box size 425mmx360mmx140mm Epoxy powder
coated to protect it from Weathering , smoke hood tested to
Eupropean Standard EN 403 1993-S known to reduce
Carbon Monoxide, propend(acrloein), hydrogen chloride,
hydrogen Cyanide and Solid and liquid toxic particles to
manageable level for atleast 15 minutes shall with stand
tempeartures upto 80 degrees single use only Fire Blanket
size 1.2m x1.8m used to cover any vessel containing used
to Extinguish a clothing fire wrap blanket around the victim.
1581 ELEC-9.4.18 1 Set Supply and fixing of 4Nos of 9 Ltrs capacity round bottom 876
sand buckets along with bucket sand, Fire buckets with
round bottom type enamel painted, white inside & red out
side and letter FIRE inblack out side & Handle with
mounting bracket.
1582 ELEC-9.4.19 1 Set Supply anmd fixing of Fire bucket stand fabricated by M.S. 730
angles to install for two numbers of buckets as per local fire
officers standards.
9.5 FIRE HYDRANT AND SPRINKLER SYSTEM

1583 Deleted From SOR 11-12 ELEC-9.5.1
1584 ELEC-9.5.1 1 Set Supplying, installation, testing and commissioning of electric 258420
driven main fire pump suitable for automatic operation and
consisting of following complete in all respect as required
a) Horizontal type, multistage, centrifugal, split casing pump

of cast iron body & bronze impeller with stainless steel shaft,
mechanical seal to ensure a minimum pressure of 3.5 Kg /
sq.cm. at highest and farthest outlet at specified flow of
1620 lpm at 56 Mtr. head conforming to IS 1520
Page # 111
1 2 3 4 5
b) Suitable HP SQ cage induction motor, TEFC,
synchronous speed 1500 RPM, suitable for operation on
415Volts, 3 phase 50 Hz. AC with IP 55 protection for
enclosure, horizontal foot mounted type with Class-'F'
insulation, conforming to IS-325
c) M.S. Fabricated common base plate, coupling, coupling

guard, foundation bolts etc as required.
d) Suitable cement concrete foundation duly plastered with

anti vibration pads.
Makes of Pumps: Kirloskar / Mather&Platt.
Makes of Motors: Siemens/ ABB/ Kirloskar
1586 ELEC-9.5.2 1 Set Supplying , installation , testing and commissioning of 284700
electric driven main fire pump suitable for automatic
operation and consisting of following : complete in all
respect as required




respect as required.


Page # 112
1 2 3 4 5

1590 ELEC-9.5.4 1 Set Supplying , installation, Testing and commissioning of diesel 341640
engine driven main fire pump suitable for automatic
respect as required
a) Horizontal type, multistage, centrifugal pump of cast iron

body & bronze impeller with stainless steel shaft,
1620 lpm at 56 Mtr head conforming to IS 1520
b) Suitable HP, 1500 RPM water cooled with radiator,

diesel engine conforming to relevant BS & IS standard
complete with auto starting mechanism, 12 Volts / 24 Volts
electric starting equipment, Diesel Tank, exhaust pipe
extended upto 1 m. outside pump house duly insulated with
50mm thick glass wool with 1.0mm thick alluminium sheet
cladding, residential silencer, instruments and protection as
per specification, stop solenoid for auto stop in the event of
fault with audio indications, painted with post office red
colour etc as required.


Makes of Engines : Kirloskar / Cummins.
Makes of Pumps : Kirloskar / Mather&Platt
respect as required

Page # 113
1 2 3 4 5


respect as required




1595 ELEC-9.5.7 1 Set Supplying , installation , testing and commissioning of 196187.5
respect as required
Page # 114
1 2 3 4 5
a) End suction back pull out centrifugal pump, Std fitted with
BRONZE IMPELLER & gland packing ,capacity 171
Cum/hr (2850 LPM) at total head 70 M at operating speed
2900 rpm. Pump duty as per TAC
b) 55 KW / 75 HP, 3000 srpm, TEFC (IP55) horizontal foot

mounted, squirrel cage induction motor, suitable for 415
volts +/- 10%, 3 Ph, 50 Hz +/-5%, a.c.supply. Class ‘F’
insulated and suitable for ambient temperature up to 50 deg
C. Motor in frame SC 250 M frame for driving above pump.


1596 ELEC-9.5.8 1 Set Supplying , installation, Testing and commissioning of diesel 406062.5
respect as required
a) End suction back pull out pump, Std fitted with BRONZE
Impeller & gland packing, capable of delivering 171
Cum/hr(2850 LPM) at a total head of 70 M when operated at
1800 rpm and pump duty as per TAC
b) Liquid cooled, 85 BHP at 1800 rpm, diesel engine

(Radiator cooled) 12 Volts starting system with standard
accessories

respect as required
a) End suction back pull out centrifugal pump, Std fitted

with BRONZE IMPELLER & gland packing ,capacity 137
Cum/hr (2280 LPM) at total head 70 mwc at operating
speed 2900 rpm. Pump duty as per TAC
b) 45 KW / 60 HP, 3000 srpm, TEFC (IP55) Horizontal foot

C. Motor in frame SC 225 M frame
Page # 115
1 2 3 4 5

1598 ELEC-9.5.10 1 Set Supplying, installation, Testing and commissioning of diesel 323937.5
respect as required
b) Liquid cooled, 68 BHP at 1800 rpm, Diesel engine

accessories

1599 ELEC-9.5.11 1 Set Supplying, installation, Testing and commissioning of diesel 117712.5
respect as required
a) End suction back pull out centrifugal pump, Std fitted

with BRONZE IMPELLER & gland packing ,capacity 97
Cum/hr (1620 LPM) at total head 56 mwc at operating
speed 2900 rpm. Pump duty as per TAC
b) 30 KW / 40 HP, 3000 srpm, TEFC (IP55) horizontal foot

C. Motor in frame SC 250 M frame for driving above pump.


Page # 116
1 2 3 4 5
respect as required
b) Liquid cooled, 50 BHP at 1800 rpm, Diesel engine

accessories

electric driven pressurisation / Jockey pump suitable for
automatic operation and consisting of following : complete in
all respect as required

mechanical seal and flow of 180 lpm at 56 Mtr head
conforming to IS 1520
b) Suitable HP SQ cage induction motor TEFC type suitable
for operation on 415Volts, 3 phase 50 Hz. AC with IP 55
class of protection for enclosure, horizontal foot mounted
type with Class-'F' insulation, conforming to IS-325


Makes of Pumps : Kirloskar / Mather&Platt.
Makes of Motors : Siemens/ ABB/ Kirloskar
electric driven pressurisation / Jockey pump suitable for
all respect as required

Page # 117
1 2 3 4 5

Makes of Motors : Siemens/ ABB/ Kirloskar
electric driven Terrace / Booster pump suitable for
all respect as required.



Makes of Motors : Siemens / ABB / Kirloskar
electric driven Terrace / Mono Bloc Booster pump suitable
for automatic operation and consisting of following :
complete in all respect as required.
a) Horizontal type, centrifugal End Suction pump of cast iron

b) Three Phase High Speed Centrifugal Pump. Pump with
CI Impeller and Gland Packing with 9.3 KW / 12.5HP, 2
pole, TEFC, 415 V, 3ph motor


Makes : Kirloskar
Page # 118
1 2 3 4 5
CI Impeller and Gland Packing with 7.5 KW / 10 HP, 2 pole,
TEFC, 415 V, 3ph motor

Makes : Kirloskar

CI Impeller and Gland Packing with 5 KW / 7.5 HP, 2 pole,
TEFC, 415 V, 3ph motor

Makes : Kirloskar
1609 Providing , laying, testing & Commissioning of following
classes MS pipes conforming to IS 3589 and 1239 including
fittings like elbows, tees, flanges, tapers, nuts, bolts,
gaskets etc., complete.
Makes: Jindal / Hissar / Tata pipes
ELEC-9.5.19 1 Mtr (a) 250 mm dia 2368.85

ELEC-9.5.20 1 Mtr (b) 200 mm dia 'C' Class 2343.3
ELEC-9.5.21 1 Mtr (c) 200 mm dia 'B' Class 2044
ELEC-9.5.22 1 Mtr (d) 150 mm dia 'C' Class 1752
ELEC-9.5.23 1 Mtr (e) 150 mm dia 'B' Class 1408.9
ELEC-9.5.24 1 Mtr (f) 100 mm dia 'C' Class 1105.95
ELEC-9.5.25 1 Mtr (g) 100 mm dia 'B' Class 930.75
ELEC-9.5.26 1 Mtr (h) 80 mm dia 'C' Class 730
ELEC-9.5.27 1 Mtr (i) 80 mm dia 'B' Class 653.35
ELEC-9.5.28 1 Mtr (j) 65 mm dia 'C' Class 547.5
ELEC-9.5.29 1 Mtr (k) 65 mm dia 'B' Class 492.75
ELEC-9.5.30 1 Mtr (l) 50 mm dia 'C' Class 438
ELEC-9.5.31 1 Mtr (m) 50 mm dia 'B' Class 386.9
ELEC-9.5.32 1 Mtr (n) 40 mm dia 373.76
ELEC-9.5.33 1 Mtr (o) 32 mm dia 'C' Class 292
ELEC-9.5.34 1 Mtr (p) 32 mm dia 'B' Class 240.9
ELEC-9.5.35 1 Mtr (q) 25 mm dia 'C' Class 219
ELEC-9.5.36 1 Mtr (r) 25 mm dia 'B' Class 197.1
Page # 119
1 2 3 4 5
1610 ELEC-9.5.37 1 No Supplying and fixing single headed Internal / External 5931.25
hydrant valve with instantaneous Gun metal couplings of
63mm dia with Cast iron wheel ISI marked conforming to IS
5290 (Type -A) with blank Gun Metal cap and chain as
required.
Makes: Audco / Kirloskar / BDK /H Shankar/ Leader/ Zolotto
/ Intervalve.
1611 Supplying, fixing, testing and commissioning of butterfly

valve PN 1.6, with Bronze / Gun metal seat duly ISI marked
complete with Nuts, Bolts, Washers, gaskets, conforming to
IS 13095 of following sizes as required.
Makes: Audco / Kirloskar / BDK / H-Shankar / Leader/
Zolotto / Intervalve.
ELEC-9.5.38 1 No (a) 250 mm . dia 9143.25

ELEC-9.5.39 1 No (b) 200 mm . dia 3869
ELEC-9.5.40 1 No (c) 150 mm dia 3175.5
ELEC-9.5.41 1 No (d) 100 mm dia 2482
ELEC-9.5.42 1 No (e) 80 mm dia 2263
1612 Providing, installation, testing and commissioning of dual
plate non - return valve of following sizes confirming to IS:
5312 complete with rubber gasket, GI bolts, nuts, washers
etc as required
ELEC-9.5.43 1 No (a) 200 mm dia 3650

ELEC-9.5.44 1 No (b) 150 mm dia 2920
ELEC-9.5.45 1 No (c) 100 mm dia 2719.25
ELEC-9.5.46 1 No (d) 80 mm dia 2555
ELEC-9.5.47 1 No (e) 50 mm dia 1257.79
1613 Manufacture, Supply and delivery of CI Wafer Lug type 0
Butterfly Valves conforming to IS 13095/1991 (Reaffirmed
1998) excluding transportation, CED and taxes etc.,
complete. Operation done with worm actuator ISI marked
Rate at Ex-Factory
ELEC-9.5.48 1 No (a) 250 mm . dia 12415.11

ELEC-9.5.49 1 No (b) 200 mm . dia 8649.77
ELEC-9.5.50 1 No (c) 150 mm dia 5570.63
ELEC-9.5.51 1 No (d) 100 mm dia 3714.24
ELEC-9.5.52 1 No (e) 80 mm dia 2782.76
ELEC-9.5.53 1 No (f) 50 mm dia 2238.91
1614 Providing, installation, testing and commissioning of gun 0
metal valves of following sizes as required.
Make: Newage/ Winco/ Padmini
ELEC-9.5.54 1 No (a) 50 mm dia 1277.5

ELEC-9.5.55 1 No (b) 40 mm dia 1022
ELEC-9.5.56 1 No (c) 32 mm dia 912.5
Deleted From SOR 11-12 ELEC-2.2.7 0
Page # 120
1 2 3 4 5
1615 ELEC-9.5.57 1 No Supplying and fixing 63mm dia, 15 mtr long RRL hose pipe 4482.2
with 63mm dia Male and Female Gun metal / SS couplings
duly binded with GI wire, rivets etc conforming to IS 636
(Type -A) as required.
1616 ELEC-9.5.58 1 No Supplying and fixing 63mm dia, 15 mtr long CP hose pipe 4022.3
with 63mm dia Male and Female Gun metal / SS couplings
duly binded with GI wire, rivets etc conforming to IS 636
(Type -A) as required.
1617 ELEC-9.5.59 1 No Supplying and fixing First -Aid Hose Reel with MS 5475
construction spray painted in Post office Red, Conforming to
Is 884 with upto date amendments, complete with the
following as required.
a) 36.6 Mtr Long 20mm (Nominal internal) dia water hose

Thermoplastic / Textile reinforced / Rubber braided /
Polypropylene Type - 2 as per IS:12585
Make: Eversafe/ Reliance/ Newage/ SRI
b) 20mm (Nominal internal) dia gun metal globe valve and

nozzle.
c) Drum and brackets for fixing the equipments on wall.
d) Connections from riser with 25mm dia stop valve (gun

metal) & MS pipe.
1619 ELEC-9.5.60 1 No Supplying and fixing of hose cabinet of size 750mm X 2372.5
600mm x 250mm made of No 16 gauge SWG CRCA sheet
with 6mm thick glazed glass door including necessary
locking arrangement suitable to accommodate 2 Nos 15 mtr
long Hose pipe, 1 No branch pipe, mounted on wall OR
raised brick platform and duly painted with Post office red
externally and white internally with synthetic enamel paint
complete in all respect, for external hydrant as required.
1620 ELEC-9.5.61 1 No Supply and fixing 63mm dia Gun metal branch pipe with 1846.9
20mm (Nominal internal diameter) size Gun metal / SS
nozzle conforming to IS 903, suitable for instantaneous
connection to interconnect hose pipe coupling as required.
1621 ELEC-9.5.62 1 No Supply and fixing 4 way fire brigade connection of cast iron 6643
body with 4 Nos Gun metal Male instantaneous inlet
couplings complete with cap and chain as required for
150mm dia MS pipe connection, conforming to IS 904 as
required.
1623 ELEC-9.5.63 1 No Supply and fixing 2 way fire brigade connection of cast iron 5037
body with 2 Nos Gun metal Male instantaneous inlet
couplings complete with cap and chain as required for
100mm dia MS pipe connection, conforming to IS 904 as
required.
Page # 121
1 2 3 4 5
1624 ELEC-9.5.64 1 No Supply and fixing air vessel made of 250 mm dia, 8 mm 11680
thick MS sheet, 1200mm in height with air release valve on
top and flanged connection to riser, drain arrangement with
25mm dia Gun metal wheel valve, with required
accessories, pressure gauge and painting with synthetic
enamel paint of approved shade as required.
1625 ELEC-9.5.65 1 No Providing fixing, testing and commissioning of 15mm size 357.7
quartzoid bulb type sprinklers of rating 68º C. pendent / side
wall with required accessories.
Makes: HD / TYCO / VIKING / NEWAGE/ SHARP
1626 ELEC-9.5.66 1 No Providing and fixing of Pressure Switch in the MS pipe Line 1825
including connection etc as required.
Make : Danfoss / Indfoss / Approved makes
1627 ELEC-9.5.67 1 No Providing and fixing Flow Switches in 100mm dia MS pipe. 3923.75
Makes : System Sensor / Switzer / Approved makes
1628 ELEC-9.5.68 1 No Providing and fixing Flow Switches in 150 mm dia MS pipe. 5475
Makes : System Sensor / Switzer / Approved makes
1629 ELEC-9.5.69 1 No Supply, installation, testing and commissioning of Bourden 492.75

type, stainless steel dial type pressure gauge with isolation
valve and pipe having calibration of 0-16 kg/cm2.
MAKE: HGURU / FIEBIG and Approved makes
1630 ELEC-9.5.70 1 No Supply, installation, testing and commissioning of 25mm dia 857.75
Gate valve
Makes : Zoloto / Leader / Approved makes
1631 ELEC-9.5.71 1 No Supply, installation, testing and commissioning of 25mm dia 474.5
Ball valve
Makes : Zoloto / Leader / Approved makes
1632 ELEC-9.5.72 1 No Supply, installation, testing and commissioning of 25 / 912.5
20mm dia Air Release Valve
1633 ELEC-9.5.73 1 No Providing, fixing, testing, commissioning of installation 6935
control valve of Cast iron body and brass / Bronze working
parts comprising of water, motor alarm, bronze seat clapper,
and clapper arm, hydraulically driven mechanical gong bell
to sound continuous alarm when the Wet riser / Sprinkler
system activates, pressure gauges, emergency releases,
strainer, pressure switch, cock valve complete with drain
valve and bypass , test control box, ball valves, Ms pipe of
required size, flanges, orifice plate, gasket etc of size
150mm dia as required.
Makes : HD / TYCO / NEWAGE
1634 Supplying, installing, testing and commissioning approved 0

make CI body Foot Valve with brass strainer with necessary
flanges, nuts and bolts etc., complete on to the suction
line.Rate as per the lowest quotation of Bharat Fire Safety
Engineers.
Makes: Normex & approved makes
ELEC-9.5.74 1 Ea a) 200mm nominal dia 18096.7
Page # 122
1 2 3 4 5
ELEC-9.5.75 1 Ea b) 150mm nominal dia 9694.4
ELEC-9.5.76 1 Ea c) 100mm nominal dia 5438.5
ELEC-9.5.77 1 Ea d) 80mm nominal dia 3723
1635 ELEC-9.5.78 AS per Supply and laying of 300mm dia NP2 RCC Hume pipe with 0
Civil SSR Collars for Road crossings
1636 Supplying and wrapping the anticorrosive material for buried 0
pipes with coating of Primer and wrapping with 4 mm thick
polymer corrosion resistant tape as per IS : 10221 with 15
mm overlap as per specificatios.
ELEC-9.5.79 1 Mts a) 150mm nominal dia 32.85

ELEC-9.5.80 1 Mts b) 100mm nominal dia 29.2
ELEC-9.5.81 1 Mts c) 80mm nominal dia 21.9
1637 ELEC-9.5.82 1 Kg Supply, fabricating , installing structural steel supports for 43.8
fixing all sizes of MS pipes from ceiling / wall with MS
Channels, Angles, Flats, Rods, as required at site with
anchor fasteners, Clamps, threaded rods, nuts, bolts,
washers etc complete with painting.

1647 ELEC-9.5.83 1 Mtr Supply of 2 Core x 1.5Sqmm FRLS armoured copper cable 62.78
as per IS. 7098 / Part-I / 1988 including all taxes etc.,
complete of make Universal / CCI / Unicab / Polycab /
Finolex / KEI / Havells.
1651 ELEC-9.5.87 1 Mtr Supply of 10 Core x 1.5Sqmm FRLS armoured copper 156.22
cable as per IS. 7098 / Part-I / 1988 including all taxes etc.,
10.1 GENERATORS SPECIFICATION 0
Page # 123
1 2 3 4 5
1652 Supply, Transportation, erection and commissioning
(Excluding Foundation) of 3 Phase, 415, 50Hz, water cooled
multi cylinder diesel generator set with alternator of - - -
KVA/ - - - - - KW out put contineous rating directly coupled
Engine and Alternator with guard and mounted on a
common base plate of Robust construction and complete
without control panel having IP-52 protection, Acoustic
Enclosure as per CPCB norms , sound absorbing material,
t to restrict sound level up to 75 dB up to 1 mtr distance and
as per CPCB norms etc as per following specifications
mentioned below.
A. Alternator : Kirloskar / Stamford / Crompton Greaves /

Leroy Somer make. The alternator of the output rating shall
be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM.
The alternator is self excited, self regulated, and shall
confirm to IS: 13364 of 1992 with regulation of +5% from no
load to full load. degree of protections shall be IP23.
B.Diesel Engine : Kirloskar / Cummins / Mahindra &

Mahindra Diesel Engine start, developing suitable --------------
BHP output at 1500 RPM with mechanical / electronic
governing so as to enable the alternator to give - - - - -KVA
continuous output at 0.8 P.F. lagging at NTP conditions. The
diesel engine shall be capable of providing 10% O/L for 1 Hr
for every 11 Hrs of continuous running at full load. The
engine with 1st filling of oil and Diesel etc.
01. Exhaust pipe of required size and length with insulation
or clading.
02. Diesel tank suitable for 8 to 12 Hours running capacity.
03. Residential Silencer.
04. SMF Batteries with leads as per the Manufacturer
standards

1654 ELEC-10.1.1 1 No 15KVA, 3 Phase, 415, 50Hz, 19BHP, water cooled multi 303187.5
cylinder diesel generator set with alternator of 15 KVA out
put continous rating at 0.8 p.f, Batteries .
1655 Deleted From SOR 11-12 ELEC-10.1.3 0

1658 ELEC-10.1.2 1 No 30KVA, 3 Phase, 415, 50Hz, 40 to 42 BHP, water cooled 389812.5
multi cylinder diesel generator set with alternator of 30KVA
out put continous rating at 0.8 p.f, Batteries.
1659 ELEC-10.1.3 1 No 40KVA, 3 Phase, 415, 50Hz, 56BHP, water cooled multi 485100
put continous rating at 0.8 p.f, and Batteries .
Page # 124
1 2 3 4 5
mentioned below.

confirm to IS: 13364 of 1992 with regulation of +5% from no
load to full load. degree of protections shall be IP21.
B.Diesel Engine : Kirloskar / Cummins / Mahindra &

Mahindra Diesel Engine start, developing suitable --------------
BHP output at 1500 RPM with mechanical / electronic
governing so as to enable the alternator to give - - - - -KVA
continuous output at 0.8 P.F. lagging at NTP conditions. The
diesel engine shall be capable of providing 10% O/L for 1 Hr
for every 11 Hrs of continuous running at full load. The
engine with 1st filling of oil and Diesel etc.
or clading.
standards
Page # 125
1 2 3 4 5
C. AMF Control Panel:- AMF control panel shall be
fabricated with 16SWG CRCA sheet shall be totally
enclosed with dust and Vermin proof, floor mounted / wall
mounted type and shall be comprising the following.
01. Voltmeter with selector switch.

02. 4 Pole MCCB incomer of ----------A rating of Schenieder
/ L&T make for EB and DG .
03. Ammeter with selector switch with CTs.
04. PF Meter and frequency Meter.
05. Indicator lamps (set Run, Load ON) with fuses.
06. KWH Meter of required rating.
07. Set of control fuses and current transformer.
08. Input Terminal board and output Terminal Board.
09. Battery charger with transformer rectifier unit.
10. Alternator supply air break contactor of L&T make.
11. Main supply air break contactor of L&T make.
12. Audio Visual announciation .
13. Main supply voltage set of control relays and timers with
one mode selector switch, set of push buttons.
14.Control cable up to 15 Mtrs 2.5Sqmm 6 Core

ELEC-10.1.4 1 No 63.00KVA, 3 Phase, 415, 50Hz, 78 to 83BHP, water cooled 606375
multi cylinder diesel generator set with alternator of 63KVA
out put continous rating at 0.8 p.f, and Batteries .
ELEC-10.1.5 1 No 125KVA, 3 Phase, 415, 50Hz, 154BHP, water cooled multi 822937.5
cylinder diesel generator set with alternator of 125 KVA

mentioned below.
Page # 126
1 2 3 4 5
confirm to IS: 13364 of 1992 or latest version with regulation
of +5% from no load to full load. degree of protections shall
be IP23.
B.Diesel Engine : Kirloskar / Cummins / Catterpiller Diesel

Engine start, developing suitable -------------- BHP output at
1500 RPM with mechanical / electronic governing so as to
enable the alternator to give - - - - -KVA continuous output
at 0.8 P.F. lagging at NTP conditions. The diesel engine
shall be capable of providing 10% O/L for 1 Hr for every 11
Hrs of continuous running at full load. The engine with 1st
filling of oil and Diesel etc.
or clading.
standards
C. AMF Control Panel:- AMF control panel shall be

fabricated with 16SWG CRCA sheet shall be totally
enclosed with dust and Vermin proof, floor mounted / wall
mounted type and shall be comprising the following.
01. Voltmeter with selector switch.

02. 4 Pole MCCB incomer of ----------A rating of Schenieder
/ L&T make for EB and DG .
03. Ammeter with selector switch with CTs.
04. PF Meter and frequency Meter.
05. Indicator lamps (set Run, Load ON) with fuses.
06. KWH Meter of required rating.
07. Set of control fuses and current transformer.
08. Input Terminal board and output Terminal Board.
09. Battery charger with transformer rectifier unit.
10. Alternator supply air break contactor of L&T make.
11. Main supply air break contactor of L&T make.
12. Audio Visual announciation .
13. Main supply voltage set of control relays and timers with
one mode selector switch, set of push buttons.
Page # 127
1 2 3 4 5
ELEC-10.1.6 1 No 160KVA, 3 Phase, 415, 50Hz, 200BHP, water cooled multi 1126125
out put continous rating at 0.8 p.f, and Batteries
put continous rating at 0.8 p.f, and Batteries
11.1 UPS SYSTEMS

1662 ELEC-11.1.1 1 No Supply and installation of 800VA, 12VDC home UPS system 7837.5
pure sine wave out put, single phase input / Single phase
output. Makes: Servomax / Top Power / Amar Raja /
Samhitha.
1663 ELEC-11.1.2 1 No Supply and installation of 1400VA, 24VDC home UPS 11137.5
system pure sine wave out put, single phase input / Single
phase output. Makes: Servomax / Top Power / Amar Raja /
Samhitha.
1664 ELEC-11.1.18 Supply and installation of 2000VA, 36VDC home UPS 15840
system pure sine wave out put, single phase input / Single
phase output. Makes: Servomax / Top Power / Amar Raja /
Samhitha.
1665 ELEC-11.1.3 1 No Supply and installation of 2.0KVA true on line UPS system 24255
IGBT technology pure sine wave out put, double conversion
with auto and manual static by pass switch single phase
input / Single phase output. Makes: Megatech / Power one /
Numeric / DB Power.
1666 ELEC-11.1.4 1 No Supply and installation of 3.0KVA, 72VDC true on line UPS 32593.275
system IGBT technology pure sine wave out put, double
conversion with auto and manual static by pass switch
single phase input / Single phase output. Makes: Megatech /
Power one / Numeric / DB Power.
1667 ELEC-11.1.5 1 No Supply and installation of 5.0KVA, 180/192VDC true on line 56306.25
UPS system IGBT technology pure sine wave out put,
double conversion with auto and manual static by pass
switch single phase input / Single phase output. Makes:
Megatech / Power one / Numeric / DB Power.
1668 ELEC-11.1.6 1 No Supply and installation of 7.5KVA, 180/192VDC true on line 77962.5
1669 ELEC-11.1.7 1 No Supply and installation of 10KVA, 180/192VDC true on line 90956.25
1670 ELEC-11.1.8 1 No Supply and providing of UPS cum battery rack up to 4 1095
batteries
Page # 128
1 2 3 4 5
1671 ELEC-11.1.9 1 No Supply and providing of UPS cum battery rack 5 to 10 2098.75
batteries
1672 ELEC-11.1.10 1 No Supply and providing of UPS cum battery rack upto 11 to 20 3777.75
batteries
1673 ELEC-11.1.11 1 No Supply and fixing of 12V 26 AH SMF battery including wire 2810.5
leads make Quanta / Racket / Exide.
1676 ELEC-11.1.14 1 No Supply and fixing of 12V 100 AH SMF battery including wire 7227
1677 ELEC-11.1.15 1 No Supply and fixing of 12V 120 AH SMF battery including wire 7665
1678 ELEC-11.1.16 1 No Supply and fixing of 12V, 120 AH MF battery including wire 7274.45
leads make Amar Raja(Power Zone) or Equivalent model of
Exide / Panasonic / Gotech.
1679 ELEC-11.1.17 1 No Supply and fixing of 12V, 150 AH MF battery including wire 9307.5
leads make Amar Raja(Power Zone) or Equivalent model of
Exide / Panasonic / Gotech.
Page # 129

Reformulated SoR For The Year 2013-14

Uploaded by

Copyright:

Available Formats

Reformulated SoR For The Year 2013-14

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Reformulated SoR For The Year 2013-14

Uploaded by

Copyright:

Available Formats

Government of Andhra Pradesh

Reformulated BASIC SCHEDULE

BOARD OF CHIEF ENGINEERS

1 Part-I(Water Resources work items) 1 30

3 Part-IV(Public Health Works) 1 17

4 Part-III(Buildings) Civil items 1 98

Electrical items 1 129

Basic Rate for

1 Acetylene gas cum 272

2 Asphalt 80/100 Grade Kg 33

4 Burnt stone slab 10 cm thick sqm 238

Cement 43 Gr/53 Gr (Including loading charges)

Coarse aggregate 10-4.75 mm(excluding

Coarse aggregate 20-10 mm(excluding Seigniorage

Coarse aggregate 40-20 mm(excluding Seigniorage

Coarse aggregate 80-40 mm(excluding Seigniorage

11 Coir brush Each 36

12 Copper sheet 16 SWG kg 565

Coursed rubble stone 30 x 30 x 45 cm(excluding

15 Curing Compound Ltr 97

17 Delay - noiseless trunk Each 16

18 Detonating fuse coil Rm 9

20 Detonator delay type Each 18

21 Detonator electric Each 10

22 Detonator ordinary Each 7

23 Empty cement bag Each 4.50

25 Explosive ANFO high strength booster kg 58

26 Explosive small dia ( Kelvex-220 or equivalent) kg 55

(a)Fine aggregate/ sand(un- screened) for Concrete

29 Geo-textile ( filter fabric ) 160 gsm sqm 83

30 Geo-textile ( filter fabric ) 200 gsm sqm 100

31 Geo-textile ( filter fabric ) 250 gsm sqm 117

32 G I Pipe 100 mm dia B Class Rm 625

33 G I Pipe 15 mm dia A class Rm 89

34 G I pipe 25 mm dia A class Rm 136

35 G I pipe 40 mm dia B class Rm 247

36 G I pipe 50 mm dia A class Rm 272

37 G I Pipe 80 mm dia B Class Rm 417

39 G.I sheet ( plain ) tonne 56122

40 Hariyala turfing sods sqm 24

41 Hectometer stone one line dressed Each 219

43 Honne wood planks cum 42109

44 Hume pipe with collar 150 mm dia Rm 272

45 Hume pipe with collar 300 mm dia Rm 536

46 J- Bolts 30 cm long Each 28

47 Jungle wood planks cum 17955

48 Khandki stone 15 to 20 cm height Each 10

49 Khandki stone 20 to 25 cm height Each 12

50 Khandki stone 25 to 30 cm height Each 15

51 Kilometer stone one line dressed Each 410

52 LDPE sheet ( Geo membrane ) 500 micron thick sqm 72

53 LDPE sheet ( Geo membrane ) 750 micron thick sqm 106

54 LDPE sheet ( Geo membrane ) 1000 micron thick sqm 149

55 M S Bolts / Nuts / Washers kg 72

Murrum(including loading charges but excluding

58 Oxygen gas cum 43

59 PVC sealing strip Rm 37

60 PVC water stopper 310 mm wide Rm 412

61 PVC pipe of 100 mm dia Rm 149