Cat.No.

A01-12-F

Ordinary Pressure Gauges

(Silver M)
(Old JIS standard products are also available.)

OUTLINE
These are reasonably priced general-purpose pressure
gauges manufactured in accordance with JIS B 7505 Bourdon
Tube Pressure Gauges. They are applicable to air pressure,
hydraulic pressure and other general pressure measurement
applications.

FEATURES
･ These pressure gauges comply with JIS standards, and
feature stable quality and performance.
･ The case is made of extremely corrosion resistant
electrolytic zinc-coated steel sheet.
･ The outside frame is fastened with screws, so removal for
maintenance and marking is easy.

＊When selecting a pressure gauge, select the pressure range over which the gauge
 will demonstrate top performance in a working pressure range within 30 to 65% of
 full scale. Also check whether the wetted parts material is suitable for the gas or
 fluid to be measured.

SPECIFICATION 1
Fluid: Window:
  Gas or liquid   Up to 10MPa range : Inorganic glass
  10MPa range or over : Acrylic glass
Size: Blowout disk:
  60DIA., 75DIA., 100DIA.   If by chance the Bourdon tube should explode, the blowout
  disk releases the internal pressure to prevent shattering of
Mounting:   the window.
  Stem ‥‥      TYPE A   Note For the blowout disk to function normally, when
      installing, provide a space of at least 10mm behind
      the gauge. Also, do not block the window hole and
            TYPE B       plug with your hand.
  Up to 10MPa range : Without blowout disk
  10MPa range or over : With blowout disk
  Panel ‥‥     TYPE D
          (Mounting hole, outside flange center socket, Function:
           outside flange eccentric socket)   Standard, vibration-proof type (V)
  * Application class complies with JIS B 7505 Bourdon Tube
Connection:   Pressure Gauges.
  G1/4B, G3/8B, R1/4, R3/8, R1/2, 1/2NPT
Case material & finish:
Wetted parts materials:   Case Electrolytic zinc-coated steel sheet (SECC), black
  Bourdon tube C6872T (4MPa range or over: SUS316)   (GS58, 59: Colored chromate)
  Socket C3604BD (Type D 75DIA. and 100DIA. are made of CAC203.)   Cover SUS430, base material (With outside flange : SPCC,
  chromate plating)
Pressure range: Treatment : (Option)
  0∼0.1→0∼50MPa    Use no oil & water
  -0.1∼0→-0.1∼2MPa   Treated so that oils or moisture do not remain on the wetted parts.
Operating temperature: Throttle : (Option)
  -5∼45℃   A throttle is installed to the inlet port to reduce pulsating pressure.
  Type No. : FS10-011
Accuracy：
Dial scale specification: (Option)
  ±1.6％F.S. (JIS standard), ±1.5％F.S. (Old JIS Standard mark)
  Red line, Colored circle, Customer's logo
Ordinary Pressure Gauges (Silver M)

SPECIFICATION 2

Stem TYPE A （35）

（35）

105.5 DIA.
D DIA. （12.5）
k

（h）
（h）

□17 □j

d
f

f
d
G□

3
3

5 DIA. 5 DIA.
Size d D f h Model number Size d f h j k Model number
G1/4B 65 16 58 GS50-121 G3/8B 18 82 17 12.5 GS52-131
60
d

f
R1/4 65 16 58 GS50-171 G1/2B 20 88 22 15 GS52-141
f

d
R□
R□ G1/4B 80.5 16 68 GS51-121 100 R3/8 18 82 17 12.5 GS52-181
75 G3/8B 80.5 18 70 GS51-131 R1/2 20 88 22 15 GS52-191
R3/8 80.5 18 70 GS51-181 1/2NPT 20 88 22 15 GS52-1M1

GS50−1□1
GS52−1□1
GS51−1□1

Stem TYPE B
（36） （36）
3-4.5DIA. 3-4.5DIA.
0.8 0.8
Mounting hole Mounting hole
P.C.D.D2   P.C.D.D2

D1 DIA.
D DIA.
D1 DIA.
D DIA.

k k

h
□j □j
h

Size d D1 D f h j k D2 Model number

d

f
f

d G1/4B 80 65 16 58 17 13.5 72 GS50-221 G□

60
G□
R1/4 80 65 16 58 17 13.5 72 GS50-271
5DIA. 3
5DIA.
3

G1/4B 98 80.5 16 68 17 13.5 88 GS51-221

75 G3/8B 98 80.5 18 70 17 13.5 88 GS51-231
f

d
R□
R3/8 98 80.5 18 70 17 13.5 88 GS51-281
f

d
R□ G3/8B 128 105.5 18 82 17 13.5 115 GS52-231
G1/2B 128 105.5 20 88 22 16 115 GS52-241
GS50−2□1 100 R3/8 128 105.5 18 82 17 13.5 115 GS52-281 GS51−2□1
R1/2 128 105.5 20 88 22 16 115 GS52-291 GS52−2□1
1/2NPT 128 105.5 20 88 22 16 115 GS52-2M1

Panel TYPE D

75DIA., 100DIA
3-4.5DIA.
3-4.5DIA. Mounting hole
Mounting hole j j   P.C.D.115
 P.C.D.88 j j
128 DIA.
103 DIA.
98 DIA.
78 DIA.

78 DIA.

103 DIA.

d
R□ d
25

R□
35
5 DIA.

5 DIA.

2 12 f
f 1 f2 3 d 12 f
5 2
（h） 12 f 3 d
5
（h）

GS57−2□1
GS56−2□1

Size d f h j Model number

G3/8B 18 66.5 14 GS57-231
Size d f1 f2 h j Model number G1/2B 20 68.5 17 GS57-241
G1/4B 10 16 63.5 12 GS56-221 100 R3/8 18 66.5 14 GS57-281
75 G3/8B 12 18 65.5 14 GS56-231 R1/2 20 68.5 17 GS57-291
R3/8 12 18 65.5 14 GS56-281 1/2NPT 20 68.5 17 GS57-2M1
 Ordinary Pressure Gauges (Silver M)

Panel TYPE D
60 DIA.
3-4.5 DIA. 3-4.5 DIA.
Mounting hole Mounting hole

□17

□17
P.C.D.72 P.C.D.72
G1/4B 16
G1/4B GS58-221
16

80 DIA.
65 DIA.
62 DIA.
GS55-211

80 DIA.

63.3 DIA.
18.5

5 DIA.
5 DIA.
R1/4
R1/4 GS58-271
1.2 GS55-271 3 1.2 16 3
20 16 3
（32） 26
（39） 28
GS55−221 GS58−221
GS55−271 GS58−271

3-4.5 DIA.
Mounting hole
□17

P.C.D.72
Throttle
63 DIA.

G1/4B 16
80 DIA.

GS59-221
M4

0.5 DIA.
18.5

5 DIA.

60°
FS10−011
R1/4
Material：C3604BD
3 1.2 12 16 3 GS59-271 1.5
7
37 28

GS59−221
GS59−271

SPECIFICATION 3
Minimum graduation :
 The number of graduations depends on the pressure range and size. Minimum graduations are shown in the table below.
Size and accuracy
Pressure range 60 DIA. 75 DIA. 100 DIA.
（MPa） JIS Old JIS JIS Old JIS JIS Old JIS
1.6% 1.5% 1.6% 1.5% 1.6% 1.5%
∼0.1 0.002 0.005 0.002 0.005 0.002 0.005
∼0.16 0.005 0.005 0.005
∼0.2 0.01 0.01 0.005
∼0.25 0.005 0.005 0.005
∼0.3 0.01 0.01 0.01
∼0.4 0.01 0.02 0.01 0.02 0.01 0.01
∼0.6 0.01 0.02 0.01 0.02 0.01 0.02
∼1 0.02 0.05 0.02 0.05 0.02 0.05
∼1.5 0.05 0.05 0.05
∼1.6 0.05 0.05 0.05
∼2 0.1 0.1 0.05
∼2.5 0.05 0.1 0.05 0.1 0.05 0.05
∼3.5 0.1 0.1 0.1
∼4 0.1 0.1 0.1
∼5 0.2 0.2 0.1
∼6 0.1 0.1 0.1
∼7 0.2 0.2 0.2
∼10 0.2 0.5 0.2 0.5 0.2 0.2
∼15 0.5 0.5 0.5
∼16 0.5 0.5 0.5
∼25 0.5 1 0.5 1 0.5 0.5
∼35 1 1
∼40 1 1
∼50 1
−0.1∼0 0.002 0.005 0.002 0.005 0.002 0.002
∼0.1 0.005 0.01 0.005 0.01 0.005 0.005
∼0.16 0.005 0.005 0.005
∼0.2 0.01 0.01 0.01
∼0.25 0.01 0.01 0.1
∼0.3 0.02 0.02 0.01
∼0.4 0.01 0.02 0.01 0.02 0.01 0.01
∼0.6 0.02 0.02 0.02 0.02 0.02 0.02
∼1 0.02 0.05 0.02 0.05 0.02 0.02
∼1.5 0.05 0.05 0.05
∼1.6 0.05 0.05 0.05
∼2 0.1 0.1 0.05
∼2.5 0.05 0.05 0.05
Ordinary Pressure Gauges (Silver M)
Model number configuration For ordering, please specify the model number, each specs and range.

G S 5 1 0 0
Ordinary Pressure Gauges (Silver M) ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ ⑮
（60 DIA.）
Model Selective spec. Additional spec. (OPTION)
0 Stem 
Model 5 Panel Mounting hole
8 Panel Outside flange center socket
9 Panel Outside flange eccentric socket

① Stem Panel
Mounting 1 Type A ―――
2 Type B Type D

② 2 G1/4B
Connection 7 R1/4

③ 1 Bourdon tube: C6872T (4MPa range or over: SUS316)

Wetted parts Socket: C3604BD
materials

④ 1 -0.1∼0.1, 0.16, 0.2, 0.25, 0.3, 0.4, 0.6, 1, 1.5, 1.6, 2, 2.5
(When ordering, please specify Pressure range 2 -0.1∼0, 0∼0.1, 0.16, 0.2, 0.25, 0.3, 0.4, 0.6, 1, 1.5, 1.6, 2, 2.5, 3.5
the range and units separately.) （MPa） 3 0∼4, 5, 6, 7
4 0∼10, 15, 16
5 0∼25 (35MPa and 40MPa range 50DIA. are not available.)

⑤ 0 Standard
Function C V: Vibration-proof type

⑥ 0 Standard
Pointer

⑦ 0 Standard
Window Inorganic glass (Up to 10MPa range)
Acrylic glass (10MPa range or over)

⑧ 0 Nil
Treatment 1 Use no oil
2 Use no water
3 Use no oil & water

⑨ 0 Nil
Other additional 1 Required
spec. (Please specify the desired documents separately.)
Dial scale, throttle

⑭ J JIS Accuracy±1.6％
Class X Not JIS

⑮ 0 Nil
Documents 1 Required
(Please specify the desired documents separately.)
Submission drawings, instruction manual,
inspection procedure, mill sheet,
test report (1 pc 1 copy),
traceability certificate, attended inspection

Specify "X" if there is no specification item.

 Ordinary Pressure Gauges (Silver M)
Model number configuration For ordering, please specify the model number, each specs and range.

G S 5 1 0 0
Ordinary Pressure Gauges (Silver M) ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ ⑮
（75 DIA.）
Model Selective spec. Additional spec. (Option)
1 Stem 
Model 6 Panel Outside flange eccentric socket

① Stem Panel
Mounting 1 Type A ―――
2 Type B Type D

② 2 G1/4B
Connection 3 G3/8B
8 R3/8

③ 1 Bourdon tube：C6872T (4MPa range or over: SUS316)

Wetted parts Socket：C3604BD (Type D: CAC203)
materials

④ 1 -0.1∼0.1, 0.16, 0.2, 0.25, 0.3, 0.4, 0.6, 1, 1.5, 1.6, 2, 2.5
(When ordering, please specify Pressure range 2 -0.1∼0, 0∼0.1, 0.16, 0.2, 0.25, 0.3, 0.4, 0.6, 1, 1.5, 1.6, 2, 2.5, 3.5
the range and units separately.) (MPa) 3 0∼4, 5, 6, 7
4 0∼10, 15, 16
5 0∼25, 35, 40

⑤ 0 Standard
Function C V: Vibration-proof type

⑥ 0 Standard
Pointer

⑦ 0 Standard
Window Inorganic glass (Up to 10MPa range)
Acrylic glass (10MPa range or over)

⑧ 0 Nil
Treatment 1 Use no oil
2 Use no water
3 Use no oil & water

⑨ 0 Nil
Other additional 1 Required
spec. (Please specify the desired documents separately.)
Dial scale, throttle

⑭ J JIS Accuracy±1.6％
Class X Not JIS

⑮ 0 Nil
Documents 1 Required
(Please specify the desired documents separately.)
Submission drawings, instruction manual,
inspection procedure, mill sheet,
test report (1 pc 1 copy),
traceability certificate, attended inspection

Specify "X" if there is no specification item.

Ordinary Pressure Gauges (Silver M)
Model number configuration For ordering, please specify the model number, each specs and range.

G S 5 1 0 0
Ordinary Pressure Gauges (Silver M) ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ ⑮
（100 DIA.）
Model Selective spec. Additional spec. (Option)
2 Stem 
Model 7 Panel Outside flange eccentric socket

① Stem Panel
Mounting 1 Type A ―――
2 Type B Type D

② 3 G3/8B
Connection 4 G1/2B
8 R3/8
9 R1/2
M 1/2NPT

③ 1 Bourdon tube：C6872T (4MPa range or over: SUS316)

Wetted parts Socket：C3604BD (Type D: CAC203)
materials

④ 1 -0.1∼0.1, 0.16, 0.2, 0.25, 0.3, 0.4, 0.6, 1, 1.5, 1.6, 2, 2.5
(When ordering, please specify Pressure range 2 -0.1∼0, 0∼0.1, 0.16, 0.2, 0.25, 0.3, 0.4, 0.6, 1, 1.5, 1.6, 2, 2.5, 3.5
the range and units separately.) (MPa) 3 0∼4, 5, 6, 7
4 0∼10, 15, 16
5 0∼25, 35, 40
6 0∼50

⑤ 0 Standard
Function C V: Vibration-proof type

⑥ 0 Standard
Pointer

⑦ 0 Standard
Window Inorganic glass (Up to 10MPa range)
Acrylic glass (10MPa range or over)

⑧ 0 Nil
Treatment 1 Use no oil
2 Use no water
3 Use no oil & water

⑨ 0 Nil
Other additional 1 Required
spec. (Please specify the desired documents separately.)
Dial scale, throttle

⑭ J JIS Accuracy±1.6％
Class X Not JIS

⑮ 0 Nil
Documents 1 Required
(Please specify the desired documents separately.)
Submission drawings, instruction manual,
inspection procedure, mill sheet,
test report (1 pc 1 copy),
Specify "X" if there is no specification item. traceability certificate, attended inspection

The contents in the catalogue are subject to change without notice.

Gets ISO 9001, ISO 14001, ISO／TS 16949 Certification

HEAD OFFICE & : 1-30-4, HIGASHIMAGOME OHTA-KU, TOKYO, JAPAN.

OVERSEAS PHONE : +81—3—3776—5328
SALES DEPT FAX : +81—3—3776—5447
E-mail : overseas_sales_dept @ naganokeiki.co.jp
URL http://www.naganokeiki.co.jp/
OVERSEAS PLANTS
OR AFFILIATES: U.S.A., KOREA, GERMANY, CHINA
OVERSEAS SALES NETWORK: AUSTRALIA, INDONESIA, KOREA,
MALAYSIA, PHILIPPINES, SINGAPORE,
TAIWAN, THAILAND, U.S.A.
,
100% Recycled Paper. PRINTED IN JAPAN 05.12.F（N）