Features

n Surface Mount 4 mm Square / Multiturn n 4 mm design meets EIA/EIAJ/IPC/VECI

Cermet / Industrial / Sealed SMD standard trimmer footprint
n Halogen free** with date code 114 n RoHS compliant* - see processing
n Sealed to withstand board wash information on RoHS compliant surface
100 processing mount trimmers
3214W n For trimmer applications/processing
811C n Pick and place centering design,
with flush adjustment guidelines, click here

3214 - 5-Turn Trimpot® Trimming Potentiometer

Electrical Characteristics Product Dimensions

Standard Resistance Range 3214J Side Adjust 3214G Side Adjust
...........................10 ohms to 2 megohms 1.5 1.5 DIA.
(see standard resistance table) DIA. 1 1
(.060) 1.2 2 (.060) 1.2 2
Resistance Tolerance................ ±10 % std. (.047) (.047)
Absolute Minimum Resistance 4.8 4.8
....... 1 % or 2.0 ohms (whichever is greater) (.190) (.190)
Contact Resistance Variation
................................ 3 % or 3 ohms max. 2.6 2.7 2.4
2.4 3 2.3 3
Resolution...................... Essentially Infinite (.102) (.095) (.090) (.108) (.095) 2.3
Insulation Resistance.................... 500 vdc. 5.0 (.090)
100 megohms min. (.195) 6.0
Dielectric Strength ADJUSTMENT SLOT 4.6 ADJUSTMENT SLOT (.236)
Sea Level................... 600 vac (1 minute) 0.6
WIDE (.180) 0.6
WIDE 4.6
(.022)
Adjustment Angle....................5 turns nom. (.022) (.180)
0.5 DEEP 3.71 0.5
X X DEEP
Environmental Characteristics (.020) (.146) (.020) 3.9
(.152)
Power Rating (300 volts max.) 0.2 0.8
85 °C......................................... 0.25 watt (.007) (.032)
0.13
150 °C............................................ 0 watt 2.0 1.3 (.005) 0.5
3 PLCS 3 PLCS. TYP.
Temperature Range........ -65 °C to +150 °C (.079) 4.0
1.14 1.0 (.050)
5.2 (.02)
(.039)
Temperature Coefficient........ ±100 ppm/°C (.157)
(.045)
2 PLCS. (.205)
Seal Test.......85 °C Fluorinert†/60 seconds
Humidity............ MIL-STD 202 Method 106
TRS ±2 %; IR 10 megohms
Vibration...........20 G TRS±1 %; VRS ±1 % 2.0
2.0 1.3
Shock.............100 G TRS ±1 %; VRS±1 % (.079) 2.3
1.3 0.9 (.079) 1.3 2.3 (.050) 0.9
(.090)
Load Life 1.3 2 PLCS. (.050) (.034) (.050) (.090)
0.5 (.034)
2 PLCS.
............@ 85 °C rated power 1,000 hours (.050) 0.5 2 PLCS. (.020) 2 PLCS.
TRS 3 ohms or 3 % (whichever is greater (.020) 0.2 0.2
(.007)
Rotational Cycling......................200 cycles (.007)
TRS 3 ohms or 3 % (whichever is greater) 3214W Top Adjust 3214X Top Adjust
Thermal Shock...............................5 cycles
3.9 0.8 2.5
TRS ±2 %; VRS ±1 % (.155) (.032)
2 PLCS
1.3 (.100)
Moisture Sensitivity Level......................1 3.5 5.1
(.050)
3.5 5.1
1 1 (.139) (.200)
ESD Classification.................................2 (.139) (.200)
1.3
1.2
(.050)
Physical Characteristics 2.5 (.047) 4.8 4.8
(.100) (.190) 2 (.190)
Mechanical Stop....................... Wiper idles 2
Torque..................................180 g-cm max. 1.5
DIA.
1.2
Weight.................... Approximately 0.01 oz. 3 2.6 (.060) 3 (.047)
(.102)
Marking...................... Manufacturer’s code, 1.0
3 PLCS. ADJUSTMENT SLOT 1.0
3 PLCS.
resistance code and date code (.040) 0.6
WIDE
(.040)
Solderability....................Per MIL-STD-202, ADJUSTMENT SLOT 5.3 (.022)
0.6 (.208) 3.9 5.3
Method 208 WIDE X
.0.5 DEEP
(.155) (.208)
(.022) 0.7 (.020)
Wiper.................... 50 % (Actual TR) ±10 % 0.5 DEEP (.028)
Flammability................................... UL94V0 X
(.020)
Pushover Strength 5.7
J, G.............................................. 4.4 lbs. (.225)
W, X................................................... 1 lb.
1.3 0.2
Adjustment Tool...................................H-91 0.8
(.050)
2 PLCS.
(.032) (.008)
1.3 5.1
2 PLCS. 0.2
(.050) (.200)
MM .008
DIMENSIONS: 2.0
(INCHES) 2.9
2.0 (.114) (.079)
0.25
TOLERANCES: ± EXCEPT WHERE NOTED (.079)
(.010)
1.9
TYP. 0.8
1.6 (.075)
2 WIPER 3 PLCS.
(.061) (.032)
2 PLCS.
2.5 0.8
2 PLCS. 2.5 MM
(.100) (.032) DIMENSIONS:
CCW 1 3 CW (.100) (INCHES)
CLOCKWISE
* RoHS Directive 2015/863, Mar. 31, 2015 and Annex
** Bourns follows the prevailing definition of “halogen free” in the industry. Bourns considers a product to be “halogen free” if (a) the
Bromine (Br ) content is 900 ppm or less; (b) the Chlorine ( Cl ) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine
(Cl) content is 1500 ppm or less.
WARNING Cancer and “Trimpot” is a trademark of Bourns, Inc. †“Fluorinert” is a registered trademark of 3M Co.
Reproductive Harm Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The
products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at
www.P65Warnings.ca.gov www.bourns.com/docs/legal/disclaimer.pdf.

Downloaded from Arrow.com.

 3214 -- 5-Turn
3312 2 mm Trimpot Trimming
SMD Trimming
®
Potentiometer
Potentiometer
Packaging Specifications

J & G Styles .04

MAX. W Style X Style
(.002) 6.09
MAX. 6.35
(.240) (.250)
4.5 .05
MAX. MAX. MAX.
(.177) 5.52 ± .05 (.002) .35
MAX
(.217 ± .002) (.014)
5.55 ± .10 (J) 7.50 ± .05 7.50
1.5 + .10/ –.00 (.219 ± .004)
DIA. (.295 ± .002) (.295)
(.059 + .004/ –.000) 6.25 ± .10 (G) 1.5 + .10/ –.00
(.246 ± .004) DIA. 1.5 + .10/ –.00
4.00 ± .20 (.059 + .004/ –.000) DIA.
4.90 ± .10 (.059 + .004/ –.000)
(.157 ± .008) 4.00 ± .20 (.193 ± .004)
(.157 ± .008) 4.00
(.157) 6.70
5.10 ± .10 (.264)
2.00 ± .05 (.201 ± .004) 4.05 ± .12
(.079 ± .002) 2.00 ± .05 (.159 ± .005)
(.079 ± .002)
2.00
(.079) 12.00
8.00 ± .10 (.472)
(.315 ± .004) 12.00 ± .10
1.75 ± .10 (.472 ± .004)
(.069 ± .004) 12.00 ± .30
(.472 ± .012) 1.75 ± .10
1.75
TAPE (.069 ± .004) 16.00 ± .30
(.069) 8.6
(.630 ± .012)
1.78 ± .25 EQUAL SPACED (.339)
TAPE 16.0 ± 0.30
(.070 ± .010) 3 PLCS. W & X Style Reel (.630 ± .012)
TAPE
21.01 ± .79
13.0 ± .51 DIA. DIA.
(.512 ± .020)
(.827 ± .031)
2.67 ± .25 How To Order
(.105 ± .010)
3214 J - 1 - 502 E
Model
Style
59.18 ± 2.03 Standard or Modified
(2.330 ± .080) Product Indicator
-1 = IR Reflow (standard)
†-2 = Wave Solderable
16.4 + 1.81/ -.000 -FW5 = .070” ± .010” Shaft Extension
(.646 ± .070/ -.000) Resistance Code
REEL
178 ± 2.0
DIA.* Embossed Tape Designator
(7.00 ± .008)
12.4 + 2.01/ -.000 * Embossed Tape Designator "E"
E = Style J, G: 500 pcs./7 ” reel (standard)
330.2 ± 2.0
DIA.** (.488 + .079/ -.000) **Embossed Tape Designator "G" Style W: 250 pcs./7 ” reel (standard)
(13.00 ± .008)
(See How To Order chart for further information.) Style X: 200 pcs./7 ” reel (standard)
G = Style J, G: 1500 pcs./13 ” reel (standard)
REEL
Cover tape peel strength: Meets EIA specification 481. Style W: 1000 pcs./13 ” reel (standard)
* Embossed Tape Designator "E" Style X: 850 pcs./13 ” reel (standard)
**Embossed Tape Designator "G" G = Style J, G: 1500 pcs./13 ” reel (FW5)
(See How To Order chart for further information.) Style W, X: 600 pcs./13 ” reel (FW5)
Cover tape peel strength: Meets EIA specification 481. Consult factory for other available options.
† -2 has a treated stainless steel shaft
Tape and reel material meets Antistatic ANSI/
Standard Resistance Table ESD 5541-2003 packaging standards.

Resistance Resistance Resistance Resistance

(Ohms) Code (Ohms) Code
10 100 5,000 502
20 200 10,000 103
50 500 20,000 203
100 101 50,000 503
200 201 100,000 104
500 501 200,000 204
1,000 102 500,000 504
2,000 202 1,000,000 105
2,000,000 205
Popular distribution values listed in boldface.
Special resistances available.

Specifications are subject to change without notice. Users should verify actual device performance in their specific
applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the
last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. REV. 08/19
Downloaded from Arrow.com.
 Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and
P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹

Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
^P[OV\[UV[PJL<ZLYZZOV\SKJOLJRMVYHUKVI[HPU[OLSH[LZ[YLSL]HU[PUMVYTH[PVUHUK]LYPM`[OH[Z\JOPUMVYTH[PVUPZJ\YYLU[
and complete before placing orders for Bourns® products.

The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns®WYVK\J[PUH\ZLYHWWSPJH[PVUTH`]HY`
MYVT[OLKH[HZOLL[JOHYHJ[LYPZ[PJZHUKWHYHTL[LYZK\L[VP[OLJVTIPUH[PVUVM[OL)V\YUZ® product with other components
PU[OL\ZLY»ZHWWSPJH[PVUVYPP[OLLU]PYVUTLU[VM[OL\ZLYHWWSPJH[PVUP[ZLSM;OLJOHYHJ[LYPZ[PJZHUKWHYHTL[LYZVMH)V\YUZ®
WYVK\J[HSZVJHUHUKKV]HY`PUKPɈLYLU[HWWSPJH[PVUZHUKHJ[\HSWLYMVYTHUJLTH`]HY`V]LY[PTL<ZLYZZOV\SKHS^H`Z]LYPM`
the actual performance of the Bourns®WYVK\J[PU[OLPYZWLJPÄJKL]PJLZHUKHWWSPJH[PVUZHUKTHRL[OLPYV^UPUKLWLUKLU[
Q\KNTLU[ZYLNHYKPUN[OLHTV\U[VMHKKP[PVUHS[LZ[THYNPU[VKLZPNUPU[V[OLPYKL]PJLVYHWWSPJH[PVU[VJVTWLUZH[LMVY
KPɈLYLUJLZIL[^LLUSHIVYH[VY`HUKYLHS^VYSKJVUKP[PVUZ

<USLZZ)V\YUZOHZL_WSPJP[S`KLZPNUH[LKHUPUKP]PK\HS)V\YUZ® product as meeting the requirements of a particular industry

Z[HUKHYKLN0:6;:  VYHWHY[PJ\SHYX\HSPÄJH[PVULN<3SPZ[LKVYYLJVNUPaLK)V\YUZPZUV[YLZWVUZPISLMVYHU`
MHPS\YLVMHUPUKP]PK\HS)V\YUZ®WYVK\J[[VTLL[[OLYLX\PYLTLU[ZVMZ\JOPUK\Z[Y`Z[HUKHYKVYWHY[PJ\SHYX\HSPÄJH[PVU<ZLYZ
of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to
[OLPYKL]PJLZVYHWWSPJH[PVUZ

Bourns®WYVK\J[ZHYLUV[YLJVTTLUKLKH\[OVYPaLKVYPU[LUKLKMVY\ZLPUU\JSLHYSPMLZH]PUNSPMLJYP[PJHSVYSPMLZ\Z[HPUPUN
HWWSPJH[PVUZUVYPUHU`V[OLYHWWSPJH[PVUZ^OLYLMHPS\YLVYTHSM\UJ[PVUTH`YLZ\S[PUWLYZVUHSPUQ\Y`KLH[OVYZL]LYLWYVWLY[`
VYLU]PYVUTLU[HSKHTHNL<USLZZL_WYLZZS`HUKZWLJPÄJHSS`HWWYV]LKPU^YP[PUNI`[^VH\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZ
on a case-by-case basis, use of any Bourns®WYVK\J[ZPUZ\JO\UH\[OVYPaLKHWWSPJH[PVUZTPNO[UV[ILZHMLHUK[O\ZPZH[
[OL\ZLY»ZZVSLYPZR3PMLJYP[PJHSHWWSPJH[PVUZPUJS\KLKL]PJLZPKLU[PÄLKI`[OL<:-VVKHUK+Y\N(KTPUPZ[YH[PVUHZ*SHZZ000
KL]PJLZHUKNLULYHSS`LX\P]HSLU[JSHZZPÄJH[PVUZV\[ZPKLVM[OL<UP[LK:[H[LZ

)V\YUZL_WYLZZS`PKLU[PÄLZ[OVZL)V\YUZ®Z[HUKHYKWYVK\J[Z[OH[HYLZ\P[HISLMVY\ZLPUH\[VTV[P]LHWWSPJH[PVUZVUZ\JO
WYVK\J[Z»KH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK¸(WWSPJH[PVUZ¹<USLZZL_WYLZZS`HUKZWLJPÄJHSS`HWWYV]LKPU^YP[PUNI`[^V
H\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZVUHJHZLI`JHZLIHZPZ\ZLVMHU`V[OLY)V\YUZ®Z[HUKHYKWYVK\J[ZPUHUH\[VTV[P]L
HWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\ZPZUV[YLJVTTLUKLKH\[OVYPaLKVYPU[LUKLKHUKPZH[[OL\ZLY»ZZVSLYPZR0M)V\YUZ
L_WYLZZS`PKLU[PÄLZHZ\IJH[LNVY`VMH\[VTV[P]LHWWSPJH[PVUPU[OLKH[HZOLL[MVYP[ZZ[HUKHYKWYVK\J[ZZ\JOHZPUMV[HPUTLU[
VYSPNO[PUNZ\JOPKLU[PÄJH[PVUTLHUZ[OH[)V\YUZOHZYL]PL^LKP[ZZ[HUKHYKWYVK\J[HUKOHZKL[LYTPULK[OH[PMZ\JO)V\YUZ®
Z[HUKHYKWYVK\J[PZJVUZPKLYLKMVYWV[LU[PHS\ZLPUH\[VTV[P]LHWWSPJH[PVUZP[ZOV\SKVUS`IL\ZLKPUZ\JOZ\IJH[LNVY`VM
H\[VTV[P]LHWWSPJH[PVUZ(U`YLMLYLUJL[V)V\YUZ®Z[HUKHYKWYVK\J[PU[OLKH[HZOLL[HZJVTWSPHU[^P[O[OL(,*8Z[HUKHYK
VY¸H\[VTV[P]LNYHKL¹KVLZUV[I`P[ZLSMTLHU[OH[)V\YUZOHZHWWYV]LKZ\JOWYVK\J[MVY\ZLPUHUH\[VTV[P]LHWWSPJH[PVU

Bourns®Z[HUKHYKWYVK\J[ZHYLUV[[LZ[LK[VJVTWS`^P[O<UP[LK:[H[LZ-LKLYHS(]PH[PVU(KTPUPZ[YH[PVUZ[HUKHYKZNLULYHSS`
VYHU`V[OLYNLULYHSS`LX\P]HSLU[NV]LYUTLU[HSVYNHUPaH[PVUZ[HUKHYKHWWSPJHISL[VWYVK\J[ZKLZPNULKVYTHU\MHJ[\YLKMVY
\ZLPUHPYJYHM[VYZWHJLHWWSPJH[PVUZ)V\YUZL_WYLZZS`PKLU[PÄLZ)V\YUZ® standard products that are suitable for use in aircraft
VYZWHJLHWWSPJH[PVUZVUZ\JOWYVK\J[Z»KH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK¸(WWSPJH[PVUZ¹<USLZZL_WYLZZS`HUKZWLJPÄJHSS`
HWWYV]LKPU^YP[PUNI`[^VH\[OVYPaLK)V\YUZYLWYLZLU[H[P]LZVUHJHZLI`JHZLIHZPZ\ZLVMHU`V[OLY)V\YUZ® standard
WYVK\J[PUHUHPYJYHM[VYZWHJLHWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\ZPZUV[YLJVTTLUKLKH\[OVYPaLKVYPU[LUKLKHUKPZH[
the user’s sole risk.

;OL\ZLHUKSL]LSVM[LZ[PUNHWWSPJHISL[V)V\YUZ® custom products shall be negotiated on a case-by-case basis by Bourns

and the user for which such Bourns®J\Z[VTWYVK\J[ZHYLZWLJPHSS`KLZPNULK(IZLU[H^YP[[LUHNYLLTLU[IL[^LLU)V\YUZ
HUK[OL\ZLYYLNHYKPUN[OL\ZLHUKSL]LSVMZ\JO[LZ[PUN[OLHIV]LWYV]PZPVUZHWWSPJHISL[V)V\YUZ® standard products shall
also apply to such Bourns® custom products.

Users shall not sell, transfer, export or re-export any Bourns®WYVK\J[ZVY[LJOUVSVN`MVY\ZLPUHJ[P]P[PLZ^OPJOPU]VS]L[OL

KLZPNUKL]LSVWTLU[WYVK\J[PVU\ZLVYZ[VJRWPSPUNVMU\JSLHYJOLTPJHSVYIPVSVNPJHS^LHWVUZVYTPZZPSLZUVYZOHSS[OL`\ZL
Bourns®WYVK\J[ZVY[LJOUVSVN`PUHU`MHJPSP[`^OPJOLUNHNLZPUHJ[P]P[PLZYLSH[PUN[VZ\JOKL]PJLZ;OLMVYLNVPUNYLZ[YPJ[PVUZ
HWWS`[VHSS\ZLZHUKHWWSPJH[PVUZ[OH[]PVSH[LUH[PVUHSVYPU[LYUH[PVUHSWYVOPIP[PVUZPUJS\KPUNLTIHYNVZVYPU[LYUH[PVUHS
YLN\SH[PVUZ-\Y[OLY)V\YUZ® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without
WYPVYH\[OVYPaH[PVUMYVT)V\YUZHUKVY[OL<:.V]LYUTLU[ILYLZVSK[YHUZMLYYLKVYYLL_WVY[LK[VHU`WHY[`UV[LSPNPISL
[VYLJLP]L<:JVTTVKP[PLZZVM[^HYLHUK[LJOUPJHSKH[H

;V[OLTH_PT\TL_[LU[WLYTP[[LKI`HWWSPJHISLSH^)V\YUZKPZJSHPTZPHU`HUKHSSSPHIPSP[`MVYZWLJPHSW\UP[P]LJVUZLX\LU[PHS
PUJPKLU[HSVYPUKPYLJ[KHTHNLZVYSVZ[YL]LU\LZVYSVZ[WYVÄ[ZHUKPPHU`HUKHSSPTWSPLK^HYYHU[PLZPUJS\KPUNPTWSPLK^HYYHU[PLZ
VMÄ[ULZZMVYWHY[PJ\SHYW\YWVZLUVUPUMYPUNLTLU[HUKTLYJOHU[HIPSP[`
)RU\RXUFRQYHQLHQFHFRSLHVRIWKLV/HJDO'LVFODLPHU1RWLFHZLWK*HUPDQ6SDQLVK-DSDQHVH7UDGLWLRQDO&KLQHVHDQG6LPSOLÀHG&KLQHVH
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
*9

Downloaded from Arrow.com.