Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 62 views

    Vampamid 6 0024 V0

    Uploaded by

    Plasticos Cusen
    This document provides technical data and properties for Vampamid 6, an unfilled flame retarded halogen free polyamide 6 resin for injection molding. It lists various properties including density, shrinkage, thermal properties, mechanical properties, electrical properties, flame resistance, and standard processing conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Vampamid 6 0024 V0

    Uploaded by

    Plasticos Cusen
    62 views1 page
    This document provides technical data and properties for Vampamid 6, an unfilled flame retarded halogen free polyamide 6 resin for injection molding. It lists various properties including density, shrinkage, thermal properties, mechanical properties, electrical properties, flame resistance, and standard processing conditions.

    Original Description:

    ficha tecnica vampamid

    Original Title

    Vampamid 6 0024 V0.xls

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides technical data and properties for Vampamid 6, an unfilled flame retarded halogen free polyamide 6 resin for injection molding. It lists various properties including density, shrinkage, thermal properties, mechanical properties, electrical properties, flame resistance, and standard processing conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    62 views1 page

    Vampamid 6 0024 V0

    Uploaded by

    Plasticos Cusen
    This document provides technical data and properties for Vampamid 6, an unfilled flame retarded halogen free polyamide 6 resin for injection molding. It lists various properties including density, shrinkage, thermal properties, mechanical properties, electrical properties, flame resistance, and standard processing conditions.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Technical Data Sheet

    VAMP TECH S.p.A.

    Vampamid 6™
    Viale delle Industrie, 10/12
    20874 Busnago (MB)

    Tel. 0039.39.6957821
    Fax 0039.39.6956388

    Vampamid 6 0024 V0
    PA6 resin unfilled, flame retarded halogen free for injection moulding

    PROPERTY Norms UNITS VALUE PROPRIETA'

    General Properties Proprietà Generali

    Density ISO 1183 g/cm3 1,17 Densità


    Linear mould shrinkage ASTM D-955 % 1,5 Ritiro Lineare
    Transversal mould shrinkage ASTM D-955 % 1,5 Ritiro Trasversale
    Water adsorption (24h-23°C) ASTM D-570 % - Assorbimento Acqua

    Thermal Properties Proprietà Termiche

    Vicat softening point ASTM D-1525 °C 200 Vicat B


    Heat distortion temperature ASTM D-648 °C 70 HDT A
    Long Term Temperature - °C 120 T di utilizzo in continuo

    Mechanicals Properties Proprietà Meccaniche

    Impact strength (notched) Izod ISO 180/A KJ/m2 4,5 Izod c.i.
    Impact strength (unnoched) Izod ISO 180/U KJ/m2 90 Izod s.i.
    Tensile strength at yield ISO 527/1-2 MPa 70 Carico a snervamento
    Elongation at break ISO 527/1-2 % 10 Allungamento a Rottura
    Tensile modulus ISO 527/1-2 MPa 3500 Modulo Elastico a Trazione
    Flexural modulus ASTM D-790 MPa - Modulo elastico a Flessione
    Flexural strength ASTM D-790 MPa - Carico Massimo a Flessione

    Electrical Properties Caratteristiche Elettriche

    Comparative Tracking Index IEC 60112 V 600 CTI


    Surface Resistivity Ohm - Resistività di Superficie

    Flame Resistance Resistenza alla Fiamma

    Thickness 3,2 mm UL 94 - V0 Spessore 3,2 mm


    Thickness 1,6 mm UL 94 - V0 Spessore 1,6 mm
    Thickness 0,8 mm UL 94 - V0 Spessore 0,8 mm
    GWFI IEC 60695-2-12 °C / mm 960/1-2 GWFI
    GWIT IEC 60695-2-13 °C / mm - GWIT

    Standard Processing Conditions Condizioni di Lavoro

    Processing Temperature °C 240 Temperatura di Processo


    Mould Temperature °C 80 Temperatura dello Stampo
    Drying Time h 3 Tempo d' Essiccazione
    Drying Temperature °C 80 Temperatura d' Essiccazione
    This document contains information based on average values as obtained from the laboratory tests and observations made on our products in natural colour.
    Tested materials were injection molded and conditioned in compliance with Standard ASTM D 618, procedure A.
    The reported values refer to our best technical knowledge at the moment of testing and cannot be used as a basis for the development of applications.
    For a better assessment of the materials, you are kindly requested to contact our technical or commercial offices, which are at your disposal and will supply
    detailed information on the most suitable characteristics for their intended use.
    With reference to DPR n.224 dated May 24, 1988, issued in accordance with EC Guide-lines 85/374, Vamp Tech declines all responsability arising from an
    improper use of the products described in this document.
    Questo documento contiene informazioni basate su valori medi ottenuti da test di laboratorio e misurazioni effettuate sui nostri prodotti in colore naturale.
    I materiali analizzati sono stati stampati ad iniezione e condizionati come previsto dalla norma ASTM D 618, procedura A.
    I valori riportati si riferiscono alla nostra miglior conoscenza tecnica attuale e non sono utilizzabili al fine della progettazione di manufatti
    I nostri servizi di Assistenza Clienti e Assistenza Tecnica sono a disposizione della clientela per una approfondita valutazione in funzione dell'impiego dei
    prodotti Vamp Tech declina ogni responasbilità per utilizzi impropri dei prodotti e dei dati riportati nel presente documento a norma del DPR n° 224 del
    24/5/1998 emesso in attuazione della direttiva CEE 85/374.

    f02/04/2020

    You might also like