Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 6 views

    Abs-72 M

    Uploaded by

    mohamad mostafavi

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Abs-72 M

    Uploaded by

    mohamad mostafavi
    6 views2 pages

    Original Title

    ABS-72 M

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    6 views2 pages

    Abs-72 M

    Uploaded by

    mohamad mostafavi

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    ABS-72 M

    Classification: General purpose>Extrusion grade


    Characteristic: Extrusion grade, High rigidity& high impact strength
    Application: Refrigerator interior container and door liner(cyclopentane Blowing agent use)
    and etc.

    Property Test method Test condition Unit Typical value ABS-ER72M


    (ASTM) Specification
    Izod impact D-256 6.4 mm , notched Kj/m² 36 MIN33
    Melt flow index D-1238 220ºc , 10 kg gr/10 min 6 3-8
    Rock well hardness D-785 ........ R-scale 105 100-120
    HDT D-648 1.82 m pa ºc 85 MIN84
    Vicat softening Temp D-1525 5kg/50°c ºc 95 MIN92
    Tensile strength D-638 23ºc , 50 mm/min Kg/cm² 430 MIN420
    Tensile elongation D-638 23ºc , 50 mm/min % 30 MIN18
    Flexural strength D-790 23ºc , 2.8 mm/min Kg/cm² 620 MIN620
    Flexural Modulus D-790 23ºc , 2.8 mm/min Kg/cm² 19000 MIN18000
    Specific Gravity D-792 23ºc .. 1.04 1.04
    Molding Shrinkage D-955 … % 0.4-0.7 0.4-0.7
    Flammability Ul94 1/8inch(3.2mm) … HB HB

    TYPICAL ABS PROCESSING CONDITIONS


    it is recommended that GBPC ABS Resins be dried at (80-85°c)for 3 hours.

    Extruder with one-stage or two-stage venting and Gear pump are recommended for
    extrusion of sheet. is typical.
    ABS-72 M

    Zone 1(°c) Zone 2(°c) Zone 3(°c) Zone 4(°c) Zone 5(°c) Zone 6(°c)

    190-210 210-230 220-240 225-245 225-245 225-245

    Adapter(°c) Outer Die Mid Die zone(°c) Center Die Screen Pack
    zone(°c) zone(°c) Mesh (2layer)

    225-245 230-245 220-240 220-240 #40 / #80 / #80 /


    #40

    Nip Roll Top(°c) Nip Roll Nip Roll Die Lip Head pressure
    Middle(°c) Bottom(°c) Thickness(mm)

    50-70 60-80 70-90 3.2-4.0 140 bar

    You might also like