lOMoARcPSD|6837623

Chapter 6 - Test bank

Managerial Economics (Lebanese International University )

StuDocu is not sponsored or endorsed by any college or university

Downloaded by Muhammad Daniyal Junaid (muhammaddaniyaljunaid1@gmail.com)
 lOMoARcPSD|6837623

Managerial Economics, 7e (Keat)

Chapter 6 The Theory and Estimation of Production (Appendices 6A, 6B, and 6C)

Multiple-Choice Questions

1) The term Production Function refers to the

A) use of machinery and equipment in production.
B) relationship between costs and output.
C) relationship between inputs and output.
D) role of labor unions.
Answer: C
Diff: 1

2) The production period in which at least one input is fixed in quantity is the
A) production run.
B) long run.
C) short run.
D) planning horizon.
Answer: C
Diff: 1

3) The difference between the short-run and the long-run is

A) three months, or one business quarter.
B) the time it takes for firms to change all inputs in the production process.
C) the time it takes for firms to change only their variable inputs.
D) More information is required to answer this question.
Answer: B
Diff: 1

4) In a call center, which of the following situations can be considered as a variable input in the
short run?
A) the level of computer software being utilized
B) the number of call center representatives on duty at the center
C) the number of call center managers or supervisors
D) the size (e.g., square footage) of the call center
Answer: B
Diff: 1

5) Which of the following holds true?

A) When the Marginal Product (MP) is rising, Marginal cost (MC) is rising; and when MP is
falling, MC is falling.
B) When MP is rising, MC is falling, and when MP is falling, MC is rising.
C) When MP is rising, MC is constant, and when MP is falling, MC is negative.
D) There is no relationship between MP and MC.
Answer: B
Diff: 2

1
Copyright © 2014 Pearson Education, Inc.

Downloaded by Muhammad Daniyal Junaid (muhammaddaniyaljunaid1@gmail.com)

 lOMoARcPSD|6837623

6) The marginal product of the variable input

A) is always positive.
B) typically falls then rises.
C) is equal to the total product divided by the total amount of the variable input employed.
D) None of the above
Answer: D
Diff: 3

7) Which of the following statements about the short-run production function is true?
A) MP always equals AP at the maximum point of MP.
B) MP always equals zero when TP is at its maximum point.
C) TP starts to decline at the point of diminishing returns.
D) When MP diminishes, AP is at its minimum point.
E) None of the above is true.
Answer: B
Diff: 3

Answer the questions based on the following information.

Number of Workers Units of Output

0 0
1 40
2 90
3 126
4 150

8) The marginal product of the fourth worker is

A) 150 units of output.
B) 24 units of output.
C) negative.
D) 36 units of output.
Answer: B
Diff: 1

9) Average product is at a maximum when the number of workers that are hired is
A) 1.
B) 2.
C) 3.
D) 4.
Answer: B
Diff: 1

2
Copyright © 2014 Pearson Education, Inc.

Downloaded by Muhammad Daniyal Junaid (muhammaddaniyaljunaid1@gmail.com)

 lOMoARcPSD|6837623

10) Output (Total Product) is maximized when

A) average productivity is at its maximum.
B) the "law of diminishing returns" sets in.
C) marginal productivity is zero.
D) marginal productivity is at its maximum.
Answer: C
Diff: 2

11) If a firm finds itself operating in Stage I, it implies that

A) variable inputs are extremely expensive.
B) it overinvested in fixed capacity.
C) it underinvested in fixed capacity.
D) fixed inputs are extremely expensive.
Answer: B
Diff: 2

12) A firm that operates in Stage III of the short-run production function
A) has too much fixed capacity relative to its variable inputs.
B) has too little fixed capacity relative to its variable inputs.
C) has greatly overestimated the demand for its output.
D) should try to increase the amount of variable input used.
Answer: B
Diff: 2

13) Which of the following indicates when Stage I ends and Stage II begins in the short-run
production?
A) when AP = 0
B) when MP = 0
C) when MP = AP
D) when MP starts to diminish
Answer: C
Diff: 2

14) Which of the following indicates when Stage II ends and Stage III begins in the short-run
production function?
A) when AP = 0
B) when MP = 0
C) when MP = AP
D) when MP starts to diminish
Answer: B
Diff: 2

3
Copyright © 2014 Pearson Education, Inc.

Downloaded by Muhammad Daniyal Junaid (muhammaddaniyaljunaid1@gmail.com)

 lOMoARcPSD|6837623

15) Stage III of the short-run Production Function is

A) the most efficient mix of inputs.
B) the least costly level of output.
C) where additional units of variable inputs will lead to less output.
D) where additional units of variable inputs will lead to more output.
Answer: C
Diff: 2

16) A firm using two inputs, X and Y, is using them in the most efficient manner when
A) MPx = MPy.
B) Px = Py and MPx = MPy.
C) MPx/Py = MPy/Px.
D) MPx/MPy = Px/Py.
Answer: D
Diff: 3

17) The "Law of Diminishing Returns" states that

A) additional inputs will reduce output.
B) additional inputs will decrease average productivity.
C) the supply of inputs is becoming scarce.
D) additional inputs will lead to less additional output.
Answer: D
Diff: 2

18) Which of the following is not true about the law of diminishing returns?
A) It is a short-run phenomenon.
B) It refers to diminishing marginal product.
C) It will have an impact on the firm's marginal cost.
D) It divides Stage I and II of the production process.
E) All of the above are true.
Answer: D
Diff: 3

19) When the law of diminishing returns takes effect

A) firms must add increasingly more input if they are to maintain the same extra amount of
output.
B) firms must add decreasingly more input if they are to maintain the same extra amount of
output.
C) more input must be added in order to increase its output.
D) a firm must always try to add the same amount of input to the production process.
Answer: A
Diff: 3

4
Copyright © 2014 Pearson Education, Inc.

Downloaded by Muhammad Daniyal Junaid (muhammaddaniyaljunaid1@gmail.com)

 lOMoARcPSD|6837623

20) Assume a firm employs 10 workers and pays each $15 per hour. Further assume that the MP
of the 10th worker is 5 units of output and that the price of the output is $4. According to
economic theory, in the short run
A) the firm should hire additional workers.
B) the firm should reduce the number of workers employed.
C) the firm should continue to employ 10 workers.
D) More information is required to answer this question.
Answer: A
Diff: 3

21) Decreasing returns to scale

A) indicate that an increase in all inputs by some proportion will result in a decrease in output.
B) must always occur at some point in the production process.
C) are directly related to the law of diminishing returns.
D) All of the above are true.
E) None of the above is true.
Answer: E
Diff: 3

22) In the long run, a firm is said to be experiencing decreasing returns to scale if a 10 percent
increase in inputs results in
A) an increase in output from 100 to 110.
B) a decrease in output from 100 to 90.
C) an increase in output from 100 to 105.
D) a decrease in output from 100 to 85.
Answer: C
Diff: 3

23) Increasing returns to scale result when

A) in the long-run, an increase in inputs will lead to an increase in the average products of inputs.
B) in the long run, an increase in inputs will lead to an equivalent increase in output.
C) labor becomes more skilled.
D) All of the above
Answer: A
Diff: 2

24) In the short run, finding the optimal amount of variable input involves which relationship?
A) MP = MC
B) AP = MP
C) MP = 0
D) MRP = MFC
Answer: D
Diff: 2

5
Copyright © 2014 Pearson Education, Inc.

Downloaded by Muhammad Daniyal Junaid (muhammaddaniyaljunaid1@gmail.com)

 lOMoARcPSD|6837623

25) The perfect substitution of two inputs implies that

A) two inputs can be substituted at a ratio of 1 to 1.
B) one input can be substituted for another up to some point.
C) two inputs can be substituted at some constant ratio.
D) one input can be substituted for another.
Answer: C
Diff: 2

26) If MRP > MLC, it means that a firm should

A) use less labor.
B) use more labor.
C) increase its fixed capacity.
D) decrease its fixed capacity.
Answer: B
Diff: 2

27) In economic theory, if an additional worker adds less to the total output than previous
workers hired, it is because
A) there may be less that this person can do, given the fixed capacity of the firm.
B) he/she is less skilled than the previously hired workers.
C) everyone is getting in each other's way.
D) the firm is experiencing diminishing returns to scale.
Answer: A
Diff: 3

28) When is it not in the best interest of a company to hire additional workers in the short run?
A) when the average product of labor is decreasing
B) when the firm is in Stage II of the production process
C) when the marginal revenue product equals zero
D) when the wage rate is equal to or greater than labor's marginal revenue product
Answer: D
Diff: 2

29) An isoquant indicates different combinations of

A) two inputs that can be purchased for the same amount of money.
B) two inputs that can produce the same amount of output.
C) output that can be produced with the same amount of input.
D) output that cost the same amount to produce.
Answer: B
Diff: 1

6
Copyright © 2014 Pearson Education, Inc.

Downloaded by Muhammad Daniyal Junaid (muhammaddaniyaljunaid1@gmail.com)

 lOMoARcPSD|6837623

30) Marginal rates of technical substitution (MRTS) represent

A) the optimum combinations of inputs.
B) cost-minimizing combinations of inputs.
C) the degree to which one input can replace another without output changing.
D) All of the above
Answer: C
Diff: 2

31) Which of the following is the best example of two inputs that would exhibit a constant
marginal rate of technical substitution?
A) trucks and truck drivers
B) natural gas and oil
C) personal computers and clerical workers
D) company-employed computer programmers and temporary supplemental computer
programmers
Answer: B
Diff: 3

32) Which of the following combination of inputs is most closely reflective of decreasing
marginal rate of technical substitution (MRTS)?
A) oil and natural gas
B) sugar and high fructose corn syrup
C) computers and clerks
D) keyboards and computers
Answer: C
Diff: 3

33) Isocost curves represent

A) least cost combinations of inputs.
B) combinations of inputs that can be purchased given their prices for the same total cost.
C) a producers cost function.
D) None of the above
Answer: B
Diff: 1

34) If a firm used a combination of inputs that was to the left of its isocost line, it would indicate
that
A) it is exceeding its budget.
B) it is not spending all of its budget.
C) it is operating at its optimal point because it is saving money.
D) None of the above
Answer: B
Diff: 3

7
Copyright © 2014 Pearson Education, Inc.

Downloaded by Muhammad Daniyal Junaid (muhammaddaniyaljunaid1@gmail.com)

 lOMoARcPSD|6837623

35) A major advantage of the ________ production function is that it can be easily transformed
into a linear function, and thus can be analyzed with the linear regression method.
A) cubic
B) power
C) quadratic
D) None of the above
Answer: B
Diff: 2

36) ________ functions are very useful in analyzing production functions, which exhibit both
increasing and decreasing marginal products.
A) Cobb-Douglas
B) Straight-line
C) Quadratic
D) Cubic
Answer: D
Diff: 2

37) The following Cobb-Douglas production function, Q = 1.8L0.74K0.36, exhibits

A) increasing returns.
B) constant returns.
C) decreasing returns.
D) Both A and B
Answer: A
Diff: 3

38) When the exponents of a Cobb-Douglas production function sum to more than 1, the
function exhibits
A) constant returns.
B) increasing returns.
C) decreasing returns.
D) either increasing or decreasing returns.
Answer: B
Diff: 3

39) Which of the following is not one of the strengths of the Cobb-Douglas production function?
A) Both marginal product and returns to scale can be estimated from it.
B) It can be converted into a linear function for ease of calculation.
C) It shows a production function passing through increasing returns to constant returns and then
to decreasing returns.
D) The sum of the exponents indicates whether returns to scale are increasing, constant or
decreasing.
Answer: C
Diff: 3

8
Copyright © 2014 Pearson Education, Inc.

Downloaded by Muhammad Daniyal Junaid (muhammaddaniyaljunaid1@gmail.com)

 lOMoARcPSD|6837623

40) An advantage of using the cross-sectional regression method in estimating production is that
A) the problem of technological change over time is overcome.
B) there is no need to adjust data, which are in monetary terms for geographical differences.
C) we can assume that all plants operate at their most efficient input combinations.
D) All of the above
Answer: A
Diff: 3

Analytical Questions

Number of
Output
Workers
0 0
1 50
2 110
3 300
4 450
5 590
6 665
7 700
8 725
9 710
10 705

1) The table above shows the weekly relationship between output and number of workers for a
factory with a fixed size of plant.

a. Calculate the marginal product of labor.

b. At what point does diminishing returns set in?
c. Calculate the average product of labor.
d. Find the three stages of production.

9
Copyright © 2014 Pearson Education, Inc.

Downloaded by Muhammad Daniyal Junaid (muhammaddaniyaljunaid1@gmail.com)

 lOMoARcPSD|6837623

Answer:
Number of
Output MPL APL
Workers
0 0 -- --
1 50 50 50
2 110 60 55
3 300 190 100
4 450 150 112.5
5 590 140 118
6 665 75 110.83
7 700 35 100
8 725 25 90.63
9 710 -15 78.89
10 705 -5 70.5

a. See table.
b. Diminishing returns sets in after the third worker is hired.
c. See table.
d. Stage I is between the first and approximately the 5th worker (until APL is maximized);
Stage II is from the 5th worker to the 8th worker (MPL still positive), and Stage III begins with
the hiring of the 9th worker (MPL becomes negative).

2) Based on the table above, if the wage rate is $500 and the price of output is $5, how many
workers should the firm hire?
Answer:
Number of
Output MPL MRPL
Workers
0 0 -- --
1 50 50 $250
2 110 60 $300
3 300 190 $950
4 450 150 $750
5 590 140 $700
6 665 75 $375
7 700 35 $175
8 725 25 $125
9 710 -15 $(75)
10 705 -5 $(25)

The firm should hire 5 workers. At the 6th worker, MRPL < MLC.

10
Copyright © 2014 Pearson Education, Inc.

Downloaded by Muhammad Daniyal Junaid (muhammaddaniyaljunaid1@gmail.com)

 lOMoARcPSD|6837623

3) A firm has two plants, one in the United States and one in Mexico, and it cannot change the
size of the plants or the amount of capital equipment. The wage in Mexico is $5. The wage in the
U.S. is $20. Given current employment, the marginal product of the last worker in Mexico is
100, and the marginal product of the last worker in the U.S. is 500.

a. Is the firm maximizing output relative to its labor cost? Show how you know.
b. If it is not, what should the firm do?
Answer:
a. Maximizing output between plants requires that (MPL/w)U.S. = (MPL/w)MEXICO. Since
100/5 (=20) is not equal to 500/20 (=25), the firm is not maximizing output relative to its labor
cost.
b. The firm should hire more U.S. workers and fewer Mexican workers, all other things equal.

4) A firm is making a long-run planning decision. It wants to decide on the optimal size of plant
and labor force. It is considering building a medium-sized plant and hiring 100 workers.
Engineering estimates suggest that at those levels, the marginal product of capital will be 100
and the marginal product of labor will be 75. If the wage rate is $5 and the rental rate on capital
is $10, is the firm making the right decision? Support your answer.
Answer: No, the firm is not making the right decision. Minimizing cost (maximizing output)
requires that (MPL/w) = (MPK/r). 100/10 < 75/5, so the firm should plan to build a smaller plant
and employ more workers, all other things equal.

5) For each of the following functions, describe returns to scale.

a. Q = K + L
b. Q = K1/2L3/4
c. Q = K2L
Answer:
a. Constant returns to scale.
b. Decreasing returns to scale.
c. Increasing returns to scale.

6) How would you choose to estimate a production function for a single plant? How would you
choose to estimate a production function for a number of firms in an industry? Explain.
Answer: Estimating a production function for a single plant generally uses time-series analysis,
because it is possible to know if technology and other variables have remained constant over
time. To estimate a production function for a number of firms in an industry, it is customary to
use cross-sectional analysis because it is unlikely that technology and other relevant factors have
remained constant for all firms in the industry over time, and cross-sectional analysis removes
this problem.

11
Copyright © 2014 Pearson Education, Inc.

Downloaded by Muhammad Daniyal Junaid (muhammaddaniyaljunaid1@gmail.com)

 lOMoARcPSD|6837623

7) What are the major issues that must be considered in measuring inputs for regression analysis
of production functions?
Answer: How is labor to be measured? Can it be measured in hours, and if not, how can the
labor actually used in production be expressed? How are materials to be measured? How are
capital assets, which have different rates of depreciation and input intensity, to be measured?

8) What does the expansion path represent?

Answer: The expansion path represents the cost-minimizing choice of inputs, given constant
input prices, for different levels of output.

9) Q = K1/2L1/2
w = $2, r = $2

The firm would like to know the minimum cost of producing 2000 units of output. Find the
combination of inputs that minimizes the cost of producing 2000 units, the total cost, and
identify the expansion path.
Answer:
MPL = 1/2 K1/2L-1/2
MPK = 1/2 K-1/2L1/2
Optimization requires:
MPL/w = MPK/r
This results in K=L, which is the equation of the expansion path.
Q = K1/2L1/2 = 2000
Substitute the expansion path relationship to yield:
K* = L* = 2000
Then total cost = TC = 2 ∗ 2000 + 2 ∗2000 = $8,000

10) Q = K1/2L1/2
w = $2, r = $2

The firm would like to know the maximum output that can be produced for $8,000. Find the
combination of inputs that maximizes output for a cost of $8,000, the amount of output that can
be produced, and identify the expansion path.
Answer:
MPL = 1/2 K1/2L-1/2
MPK = 1/2 K-1/2L1/2
Optimization requires:
MPL/w = MPK/r
This results in K=L, which is the equation of the expansion path.
TC = 8,000 = 2L + 2K
Substitute the expansion path relationship to yield:
K* = L* = 2000
Then Q = K1/2L1/2 = 2000.

12
Copyright © 2014 Pearson Education, Inc.

Downloaded by Muhammad Daniyal Junaid (muhammaddaniyaljunaid1@gmail.com)

 lOMoARcPSD|6837623

11) If the price of capital is $24, the price of labor is $15, and the marginal product of capital is
16, the least costly combination of capital and labor requires that the marginal product of labor
be ________.
Answer: MPcapital/ MPlabor = Price of capital/Price of Labor, or marginal product of labor =
10.

12) If a production function is given by the equation Q = 12X + 10X2 - X3, where Q = Output
and X = Input, then calculate the equations for

a. average product
b. marginal product
c. point of diminishing average returns
d. point of diminishing marginal returns
Answer:
a. AP = Q/X, or 12 + 10X - X2
b. MP = dQ/dX, or 12 + 20X - 3X2
c. DAR occurs where AP at a maximum, or dAP/dX = 0, or 10 - 2X = 0, X = 5
d. DMR occurs where MP at a maximum, or dMP/dX = 0, or 20 - 6X = 0, X = 3.33

13) Given the Production Function Q = 72X + 15X2 - X3, where Q = Output and X = Input

a. What is the Marginal Product (MP) when X = 8?

b. What is the Average Product (AP) when X = 6?
c. At what value of X will Q be at its maximum?
d. At what value of X will Diminishing Returns set in?
Answer:
a. MP = 72 + 30X - 2X2, MP =120 when X=8;
b. AP = 72 + 15X - X2, AP=126 when X=6;
c. Q at a maximum when MP is 0, or X =12 [-2 has no meaning;]
d. Diminishing returns sets in when MP at a maximum value, or X = 5.

13
Copyright © 2014 Pearson Education, Inc.

Downloaded by Muhammad Daniyal Junaid (muhammaddaniyaljunaid1@gmail.com)